Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /***************************************************************************** |
2 | * sdla_chdlc.c WANPIPE(tm) Multiprotocol WAN Link Driver. Cisco HDLC module. | |
3 | * | |
4 | * Authors: Nenad Corbic <ncorbic@sangoma.com> | |
5 | * Gideon Hack | |
6 | * | |
7 | * Copyright: (c) 1995-1999 Sangoma Technologies Inc. | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or | |
10 | * modify it under the terms of the GNU General Public License | |
11 | * as published by the Free Software Foundation; either version | |
12 | * 2 of the License, or (at your option) any later version. | |
13 | * ============================================================================ | |
14 | * Sep 30, 1999 Nenad Corbic Fixed dynamic IP and route setup. | |
15 | * Sep 23, 1999 Nenad Corbic Added SMP support, fixed tracing | |
16 | * Sep 13, 1999 Nenad Corbic Split up Port 0 and 1 into separate devices. | |
17 | * Jun 02, 1999 Gideon Hack Added support for the S514 adapter. | |
18 | * Oct 30, 1998 Jaspreet Singh Added Support for CHDLC API (HDLC STREAMING). | |
19 | * Oct 28, 1998 Jaspreet Singh Added Support for Dual Port CHDLC. | |
20 | * Aug 07, 1998 David Fong Initial version. | |
21 | *****************************************************************************/ | |
22 | ||
23 | #include <linux/module.h> | |
24 | #include <linux/kernel.h> /* printk(), and other useful stuff */ | |
25 | #include <linux/stddef.h> /* offsetof(), etc. */ | |
26 | #include <linux/errno.h> /* return codes */ | |
27 | #include <linux/string.h> /* inline memset(), etc. */ | |
28 | #include <linux/slab.h> /* kmalloc(), kfree() */ | |
29 | #include <linux/wanrouter.h> /* WAN router definitions */ | |
30 | #include <linux/wanpipe.h> /* WANPIPE common user API definitions */ | |
31 | #include <linux/if_arp.h> /* ARPHRD_* defines */ | |
32 | ||
33 | #include <linux/inetdevice.h> | |
34 | #include <asm/uaccess.h> | |
35 | ||
36 | #include <linux/in.h> /* sockaddr_in */ | |
37 | #include <linux/inet.h> | |
38 | #include <linux/if.h> | |
39 | #include <asm/byteorder.h> /* htons(), etc. */ | |
40 | #include <linux/sdlapci.h> | |
41 | #include <asm/io.h> | |
42 | ||
43 | #include <linux/sdla_chdlc.h> /* CHDLC firmware API definitions */ | |
44 | ||
45 | /****** Defines & Macros ****************************************************/ | |
46 | ||
47 | /* reasons for enabling the timer interrupt on the adapter */ | |
48 | #define TMR_INT_ENABLED_UDP 0x0001 | |
49 | #define TMR_INT_ENABLED_UPDATE 0x0002 | |
50 | ||
51 | #define CHDLC_DFLT_DATA_LEN 1500 /* default MTU */ | |
52 | #define CHDLC_HDR_LEN 1 | |
53 | ||
54 | #define IFF_POINTTOPOINT 0x10 | |
55 | ||
56 | #define WANPIPE 0x00 | |
57 | #define API 0x01 | |
58 | #define CHDLC_API 0x01 | |
59 | ||
60 | #define PORT(x) (x == 0 ? "PRIMARY" : "SECONDARY" ) | |
61 | ||
62 | ||
63 | /******Data Structures*****************************************************/ | |
64 | ||
65 | /* This structure is placed in the private data area of the device structure. | |
66 | * The card structure used to occupy the private area but now the following | |
67 | * structure will incorporate the card structure along with CHDLC specific data | |
68 | */ | |
69 | ||
70 | typedef struct chdlc_private_area | |
71 | { | |
72 | struct net_device *slave; | |
73 | sdla_t *card; | |
74 | int TracingEnabled; /* For enabling Tracing */ | |
75 | unsigned long curr_trace_addr; /* Used for Tracing */ | |
76 | unsigned long start_trace_addr; | |
77 | unsigned long end_trace_addr; | |
78 | unsigned long base_addr_trace_buffer; | |
79 | unsigned long end_addr_trace_buffer; | |
80 | unsigned short number_trace_elements; | |
81 | unsigned available_buffer_space; | |
82 | unsigned long router_start_time; | |
83 | unsigned char route_status; | |
84 | unsigned char route_removed; | |
85 | unsigned long tick_counter; /* For 5s timeout counter */ | |
86 | unsigned long router_up_time; | |
87 | u32 IP_address; /* IP addressing */ | |
88 | u32 IP_netmask; | |
89 | unsigned char mc; /* Mulitcast support on/off */ | |
90 | unsigned short udp_pkt_lgth; /* udp packet processing */ | |
91 | char udp_pkt_src; | |
92 | char udp_pkt_data[MAX_LGTH_UDP_MGNT_PKT]; | |
93 | unsigned short timer_int_enabled; | |
94 | char update_comms_stats; /* updating comms stats */ | |
95 | //FIXME: add driver stats as per frame relay! | |
96 | ||
97 | } chdlc_private_area_t; | |
98 | ||
99 | /* Route Status options */ | |
100 | #define NO_ROUTE 0x00 | |
101 | #define ADD_ROUTE 0x01 | |
102 | #define ROUTE_ADDED 0x02 | |
103 | #define REMOVE_ROUTE 0x03 | |
104 | ||
105 | ||
106 | /****** Function Prototypes *************************************************/ | |
107 | /* WAN link driver entry points. These are called by the WAN router module. */ | |
108 | static int wpft1_exec (struct sdla *card, void *u_cmd, void *u_data); | |
109 | static int chdlc_read_version (sdla_t* card, char* str); | |
110 | static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb); | |
111 | ||
112 | /****** Public Functions ****************************************************/ | |
113 | ||
114 | /*============================================================================ | |
115 | * Cisco HDLC protocol initialization routine. | |
116 | * | |
117 | * This routine is called by the main WANPIPE module during setup. At this | |
118 | * point adapter is completely initialized and firmware is running. | |
119 | * o read firmware version (to make sure it's alive) | |
120 | * o configure adapter | |
121 | * o initialize protocol-specific fields of the adapter data space. | |
122 | * | |
123 | * Return: 0 o.k. | |
124 | * < 0 failure. | |
125 | */ | |
126 | int wpft1_init (sdla_t* card, wandev_conf_t* conf) | |
127 | { | |
128 | unsigned char port_num; | |
129 | int err; | |
130 | ||
131 | union | |
132 | { | |
133 | char str[80]; | |
134 | } u; | |
135 | volatile CHDLC_MAILBOX_STRUCT* mb; | |
136 | CHDLC_MAILBOX_STRUCT* mb1; | |
137 | unsigned long timeout; | |
138 | ||
139 | /* Verify configuration ID */ | |
140 | if (conf->config_id != WANCONFIG_CHDLC) { | |
141 | printk(KERN_INFO "%s: invalid configuration ID %u!\n", | |
142 | card->devname, conf->config_id); | |
143 | return -EINVAL; | |
144 | } | |
145 | ||
146 | /* Use primary port */ | |
147 | card->u.c.comm_port = 0; | |
148 | ||
149 | ||
150 | /* Initialize protocol-specific fields */ | |
151 | if(card->hw.type != SDLA_S514){ | |
152 | card->mbox = (void *) card->hw.dpmbase; | |
153 | }else{ | |
154 | card->mbox = (void *) card->hw.dpmbase + PRI_BASE_ADDR_MB_STRUCT; | |
155 | } | |
156 | ||
157 | mb = mb1 = card->mbox; | |
158 | ||
159 | if (!card->configured){ | |
160 | ||
161 | /* The board will place an 'I' in the return code to indicate that it is | |
162 | ready to accept commands. We expect this to be completed in less | |
163 | than 1 second. */ | |
164 | ||
165 | timeout = jiffies; | |
166 | while (mb->return_code != 'I') /* Wait 1s for board to initialize */ | |
167 | if ((jiffies - timeout) > 1*HZ) break; | |
168 | ||
169 | if (mb->return_code != 'I') { | |
170 | printk(KERN_INFO | |
171 | "%s: Initialization not completed by adapter\n", | |
172 | card->devname); | |
173 | printk(KERN_INFO "Please contact Sangoma representative.\n"); | |
174 | return -EIO; | |
175 | } | |
176 | } | |
177 | ||
178 | /* Read firmware version. Note that when adapter initializes, it | |
179 | * clears the mailbox, so it may appear that the first command was | |
180 | * executed successfully when in fact it was merely erased. To work | |
181 | * around this, we execute the first command twice. | |
182 | */ | |
183 | ||
184 | if (chdlc_read_version(card, u.str)) | |
185 | return -EIO; | |
186 | ||
187 | printk(KERN_INFO "%s: Running FT1 Configuration firmware v%s\n", | |
188 | card->devname, u.str); | |
189 | ||
190 | card->isr = NULL; | |
191 | card->poll = NULL; | |
192 | card->exec = &wpft1_exec; | |
193 | card->wandev.update = NULL; | |
194 | card->wandev.new_if = NULL; | |
195 | card->wandev.del_if = NULL; | |
196 | card->wandev.state = WAN_DUALPORT; | |
197 | card->wandev.udp_port = conf->udp_port; | |
198 | ||
199 | card->wandev.new_if_cnt = 0; | |
200 | ||
201 | /* This is for the ports link state */ | |
202 | card->u.c.state = WAN_DISCONNECTED; | |
203 | ||
204 | /* reset the number of times the 'update()' proc has been called */ | |
205 | card->u.c.update_call_count = 0; | |
206 | ||
207 | card->wandev.ttl = 0x7F; | |
208 | card->wandev.interface = 0; | |
209 | ||
210 | card->wandev.clocking = 0; | |
211 | ||
212 | port_num = card->u.c.comm_port; | |
213 | ||
214 | /* Setup Port Bps */ | |
215 | ||
216 | card->wandev.bps = 0; | |
217 | ||
218 | card->wandev.mtu = MIN_LGTH_CHDLC_DATA_CFG; | |
219 | ||
220 | /* Set up the interrupt status area */ | |
221 | /* Read the CHDLC Configuration and obtain: | |
222 | * Ptr to shared memory infor struct | |
223 | * Use this pointer to calculate the value of card->u.c.flags ! | |
224 | */ | |
225 | mb1->buffer_length = 0; | |
226 | mb1->command = READ_CHDLC_CONFIGURATION; | |
227 | err = sdla_exec(mb1) ? mb1->return_code : CMD_TIMEOUT; | |
228 | if(err != COMMAND_OK) { | |
229 | chdlc_error(card, err, mb1); | |
230 | return -EIO; | |
231 | } | |
232 | ||
233 | if(card->hw.type == SDLA_S514){ | |
234 | card->u.c.flags = (void *)(card->hw.dpmbase + | |
235 | (((CHDLC_CONFIGURATION_STRUCT *)mb1->data)-> | |
236 | ptr_shared_mem_info_struct)); | |
237 | }else{ | |
238 | card->u.c.flags = (void *)(card->hw.dpmbase + | |
239 | (((CHDLC_CONFIGURATION_STRUCT *)mb1->data)-> | |
240 | ptr_shared_mem_info_struct % SDLA_WINDOWSIZE)); | |
241 | } | |
242 | ||
243 | card->wandev.state = WAN_FT1_READY; | |
244 | printk(KERN_INFO "%s: FT1 Config Ready !\n",card->devname); | |
245 | ||
246 | return 0; | |
247 | } | |
248 | ||
249 | static int wpft1_exec(sdla_t *card, void *u_cmd, void *u_data) | |
250 | { | |
251 | CHDLC_MAILBOX_STRUCT* mbox = card->mbox; | |
252 | int len; | |
253 | ||
254 | if (copy_from_user((void*)&mbox->command, u_cmd, sizeof(ft1_exec_cmd_t))){ | |
255 | return -EFAULT; | |
256 | } | |
257 | ||
258 | len = mbox->buffer_length; | |
259 | ||
260 | if (len) { | |
261 | if( copy_from_user((void*)&mbox->data, u_data, len)){ | |
262 | return -EFAULT; | |
263 | } | |
264 | } | |
265 | ||
266 | /* execute command */ | |
267 | if (!sdla_exec(mbox)){ | |
268 | return -EIO; | |
269 | } | |
270 | ||
271 | /* return result */ | |
272 | if( copy_to_user(u_cmd, (void*)&mbox->command, sizeof(ft1_exec_cmd_t))){ | |
273 | return -EFAULT; | |
274 | } | |
275 | ||
276 | len = mbox->buffer_length; | |
277 | ||
278 | if (len && u_data && copy_to_user(u_data, (void*)&mbox->data, len)){ | |
279 | return -EFAULT; | |
280 | } | |
281 | ||
282 | return 0; | |
283 | ||
284 | } | |
285 | ||
286 | /*============================================================================ | |
287 | * Read firmware code version. | |
288 | * Put code version as ASCII string in str. | |
289 | */ | |
290 | static int chdlc_read_version (sdla_t* card, char* str) | |
291 | { | |
292 | CHDLC_MAILBOX_STRUCT* mb = card->mbox; | |
293 | int len; | |
294 | char err; | |
295 | mb->buffer_length = 0; | |
296 | mb->command = READ_CHDLC_CODE_VERSION; | |
297 | err = sdla_exec(mb) ? mb->return_code : CMD_TIMEOUT; | |
298 | ||
299 | if(err != COMMAND_OK) { | |
300 | chdlc_error(card,err,mb); | |
301 | } | |
302 | else if (str) { /* is not null */ | |
303 | len = mb->buffer_length; | |
304 | memcpy(str, mb->data, len); | |
305 | str[len] = '\0'; | |
306 | } | |
307 | return (err); | |
308 | } | |
309 | ||
310 | /*============================================================================ | |
311 | * Firmware error handler. | |
312 | * This routine is called whenever firmware command returns non-zero | |
313 | * return code. | |
314 | * | |
315 | * Return zero if previous command has to be cancelled. | |
316 | */ | |
317 | static int chdlc_error (sdla_t *card, int err, CHDLC_MAILBOX_STRUCT *mb) | |
318 | { | |
319 | unsigned cmd = mb->command; | |
320 | ||
321 | switch (err) { | |
322 | ||
323 | case CMD_TIMEOUT: | |
324 | printk(KERN_ERR "%s: command 0x%02X timed out!\n", | |
325 | card->devname, cmd); | |
326 | break; | |
327 | ||
328 | case S514_BOTH_PORTS_SAME_CLK_MODE: | |
329 | if(cmd == SET_CHDLC_CONFIGURATION) { | |
330 | printk(KERN_INFO | |
331 | "%s: Configure both ports for the same clock source\n", | |
332 | card->devname); | |
333 | break; | |
334 | } | |
335 | ||
336 | default: | |
337 | printk(KERN_INFO "%s: command 0x%02X returned 0x%02X!\n", | |
338 | card->devname, cmd, err); | |
339 | } | |
340 | ||
341 | return 0; | |
342 | } | |
343 | ||
344 | MODULE_LICENSE("GPL"); |