Commit | Line | Data |
---|---|---|
e4d6b795 MB |
1 | #ifndef B43_H_ |
2 | #define B43_H_ | |
3 | ||
4 | #include <linux/kernel.h> | |
5 | #include <linux/spinlock.h> | |
6 | #include <linux/interrupt.h> | |
7 | #include <linux/hw_random.h> | |
8 | #include <linux/ssb/ssb.h> | |
9 | #include <net/mac80211.h> | |
10 | ||
11 | #include "debugfs.h" | |
12 | #include "leds.h" | |
8e9f7529 | 13 | #include "rfkill.h" |
e4d6b795 MB |
14 | #include "lo.h" |
15 | #include "phy.h" | |
16 | ||
26bc783f MB |
17 | |
18 | /* The unique identifier of the firmware that's officially supported by | |
19 | * this driver version. */ | |
20 | #define B43_SUPPORTED_FIRMWARE_ID "FW13" | |
21 | ||
22 | ||
e4d6b795 MB |
23 | #ifdef CONFIG_B43_DEBUG |
24 | # define B43_DEBUG 1 | |
25 | #else | |
26 | # define B43_DEBUG 0 | |
27 | #endif | |
28 | ||
29 | #define B43_RX_MAX_SSI 60 | |
30 | ||
31 | /* MMIO offsets */ | |
32 | #define B43_MMIO_DMA0_REASON 0x20 | |
33 | #define B43_MMIO_DMA0_IRQ_MASK 0x24 | |
34 | #define B43_MMIO_DMA1_REASON 0x28 | |
35 | #define B43_MMIO_DMA1_IRQ_MASK 0x2C | |
36 | #define B43_MMIO_DMA2_REASON 0x30 | |
37 | #define B43_MMIO_DMA2_IRQ_MASK 0x34 | |
38 | #define B43_MMIO_DMA3_REASON 0x38 | |
39 | #define B43_MMIO_DMA3_IRQ_MASK 0x3C | |
40 | #define B43_MMIO_DMA4_REASON 0x40 | |
41 | #define B43_MMIO_DMA4_IRQ_MASK 0x44 | |
42 | #define B43_MMIO_DMA5_REASON 0x48 | |
43 | #define B43_MMIO_DMA5_IRQ_MASK 0x4C | |
aa6c7ae2 MB |
44 | #define B43_MMIO_MACCTL 0x120 /* MAC control */ |
45 | #define B43_MMIO_MACCMD 0x124 /* MAC command */ | |
e4d6b795 MB |
46 | #define B43_MMIO_GEN_IRQ_REASON 0x128 |
47 | #define B43_MMIO_GEN_IRQ_MASK 0x12C | |
48 | #define B43_MMIO_RAM_CONTROL 0x130 | |
49 | #define B43_MMIO_RAM_DATA 0x134 | |
50 | #define B43_MMIO_PS_STATUS 0x140 | |
51 | #define B43_MMIO_RADIO_HWENABLED_HI 0x158 | |
52 | #define B43_MMIO_SHM_CONTROL 0x160 | |
53 | #define B43_MMIO_SHM_DATA 0x164 | |
54 | #define B43_MMIO_SHM_DATA_UNALIGNED 0x166 | |
55 | #define B43_MMIO_XMITSTAT_0 0x170 | |
56 | #define B43_MMIO_XMITSTAT_1 0x174 | |
57 | #define B43_MMIO_REV3PLUS_TSF_LOW 0x180 /* core rev >= 3 only */ | |
58 | #define B43_MMIO_REV3PLUS_TSF_HIGH 0x184 /* core rev >= 3 only */ | |
f3dd3fcc MB |
59 | #define B43_MMIO_TSF_CFP_REP 0x188 |
60 | #define B43_MMIO_TSF_CFP_START 0x18C | |
61 | #define B43_MMIO_TSF_CFP_MAXDUR 0x190 | |
e4d6b795 MB |
62 | |
63 | /* 32-bit DMA */ | |
64 | #define B43_MMIO_DMA32_BASE0 0x200 | |
65 | #define B43_MMIO_DMA32_BASE1 0x220 | |
66 | #define B43_MMIO_DMA32_BASE2 0x240 | |
67 | #define B43_MMIO_DMA32_BASE3 0x260 | |
68 | #define B43_MMIO_DMA32_BASE4 0x280 | |
69 | #define B43_MMIO_DMA32_BASE5 0x2A0 | |
70 | /* 64-bit DMA */ | |
71 | #define B43_MMIO_DMA64_BASE0 0x200 | |
72 | #define B43_MMIO_DMA64_BASE1 0x240 | |
73 | #define B43_MMIO_DMA64_BASE2 0x280 | |
74 | #define B43_MMIO_DMA64_BASE3 0x2C0 | |
75 | #define B43_MMIO_DMA64_BASE4 0x300 | |
76 | #define B43_MMIO_DMA64_BASE5 0x340 | |
e4d6b795 | 77 | |
5100d5ac MB |
78 | /* PIO on core rev < 11 */ |
79 | #define B43_MMIO_PIO_BASE0 0x300 | |
80 | #define B43_MMIO_PIO_BASE1 0x310 | |
81 | #define B43_MMIO_PIO_BASE2 0x320 | |
82 | #define B43_MMIO_PIO_BASE3 0x330 | |
83 | #define B43_MMIO_PIO_BASE4 0x340 | |
84 | #define B43_MMIO_PIO_BASE5 0x350 | |
85 | #define B43_MMIO_PIO_BASE6 0x360 | |
86 | #define B43_MMIO_PIO_BASE7 0x370 | |
87 | /* PIO on core rev >= 11 */ | |
88 | #define B43_MMIO_PIO11_BASE0 0x200 | |
89 | #define B43_MMIO_PIO11_BASE1 0x240 | |
90 | #define B43_MMIO_PIO11_BASE2 0x280 | |
91 | #define B43_MMIO_PIO11_BASE3 0x2C0 | |
92 | #define B43_MMIO_PIO11_BASE4 0x300 | |
93 | #define B43_MMIO_PIO11_BASE5 0x340 | |
94 | ||
e4d6b795 MB |
95 | #define B43_MMIO_PHY_VER 0x3E0 |
96 | #define B43_MMIO_PHY_RADIO 0x3E2 | |
97 | #define B43_MMIO_PHY0 0x3E6 | |
98 | #define B43_MMIO_ANTENNA 0x3E8 | |
99 | #define B43_MMIO_CHANNEL 0x3F0 | |
100 | #define B43_MMIO_CHANNEL_EXT 0x3F4 | |
101 | #define B43_MMIO_RADIO_CONTROL 0x3F6 | |
102 | #define B43_MMIO_RADIO_DATA_HIGH 0x3F8 | |
103 | #define B43_MMIO_RADIO_DATA_LOW 0x3FA | |
104 | #define B43_MMIO_PHY_CONTROL 0x3FC | |
105 | #define B43_MMIO_PHY_DATA 0x3FE | |
106 | #define B43_MMIO_MACFILTER_CONTROL 0x420 | |
107 | #define B43_MMIO_MACFILTER_DATA 0x422 | |
108 | #define B43_MMIO_RCMTA_COUNT 0x43C | |
109 | #define B43_MMIO_RADIO_HWENABLED_LO 0x49A | |
110 | #define B43_MMIO_GPIO_CONTROL 0x49C | |
111 | #define B43_MMIO_GPIO_MASK 0x49E | |
f3dd3fcc MB |
112 | #define B43_MMIO_TSF_CFP_START_LOW 0x604 |
113 | #define B43_MMIO_TSF_CFP_START_HIGH 0x606 | |
d59f720d | 114 | #define B43_MMIO_TSF_CFP_PRETBTT 0x612 |
e4d6b795 MB |
115 | #define B43_MMIO_TSF_0 0x632 /* core rev < 3 only */ |
116 | #define B43_MMIO_TSF_1 0x634 /* core rev < 3 only */ | |
117 | #define B43_MMIO_TSF_2 0x636 /* core rev < 3 only */ | |
118 | #define B43_MMIO_TSF_3 0x638 /* core rev < 3 only */ | |
119 | #define B43_MMIO_RNG 0x65A | |
e6f5b934 MB |
120 | #define B43_MMIO_IFSCTL 0x688 /* Interframe space control */ |
121 | #define B43_MMIO_IFSCTL_USE_EDCF 0x0004 | |
e4d6b795 MB |
122 | #define B43_MMIO_POWERUP_DELAY 0x6A8 |
123 | ||
124 | /* SPROM boardflags_lo values */ | |
125 | #define B43_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ | |
126 | #define B43_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ | |
127 | #define B43_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ | |
128 | #define B43_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ | |
129 | #define B43_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ | |
130 | #define B43_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ | |
131 | #define B43_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ | |
132 | #define B43_BFL_ENETADM 0x0080 /* has ADMtek switch */ | |
133 | #define B43_BFL_ENETVLAN 0x0100 /* can do vlan */ | |
134 | #define B43_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ | |
135 | #define B43_BFL_NOPCI 0x0400 /* leaves PCI floating */ | |
136 | #define B43_BFL_FEM 0x0800 /* supports the Front End Module */ | |
137 | #define B43_BFL_EXTLNA 0x1000 /* has an external LNA */ | |
138 | #define B43_BFL_HGPA 0x2000 /* had high gain PA */ | |
139 | #define B43_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ | |
140 | #define B43_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ | |
141 | ||
142 | /* GPIO register offset, in both ChipCommon and PCI core. */ | |
143 | #define B43_GPIO_CONTROL 0x6c | |
144 | ||
145 | /* SHM Routing */ | |
146 | enum { | |
147 | B43_SHM_UCODE, /* Microcode memory */ | |
148 | B43_SHM_SHARED, /* Shared memory */ | |
149 | B43_SHM_SCRATCH, /* Scratch memory */ | |
150 | B43_SHM_HW, /* Internal hardware register */ | |
151 | B43_SHM_RCMTA, /* Receive match transmitter address (rev >= 5 only) */ | |
152 | }; | |
153 | /* SHM Routing modifiers */ | |
154 | #define B43_SHM_AUTOINC_R 0x0200 /* Auto-increment address on read */ | |
155 | #define B43_SHM_AUTOINC_W 0x0100 /* Auto-increment address on write */ | |
156 | #define B43_SHM_AUTOINC_RW (B43_SHM_AUTOINC_R | \ | |
157 | B43_SHM_AUTOINC_W) | |
158 | ||
159 | /* Misc SHM_SHARED offsets */ | |
160 | #define B43_SHM_SH_WLCOREREV 0x0016 /* 802.11 core revision */ | |
161 | #define B43_SHM_SH_PCTLWDPOS 0x0008 | |
162 | #define B43_SHM_SH_RXPADOFF 0x0034 /* RX Padding data offset (PIO only) */ | |
163 | #define B43_SHM_SH_PHYVER 0x0050 /* PHY version */ | |
164 | #define B43_SHM_SH_PHYTYPE 0x0052 /* PHY type */ | |
165 | #define B43_SHM_SH_ANTSWAP 0x005C /* Antenna swap threshold */ | |
166 | #define B43_SHM_SH_HOSTFLO 0x005E /* Hostflags for ucode options (low) */ | |
35f0d354 MB |
167 | #define B43_SHM_SH_HOSTFMI 0x0060 /* Hostflags for ucode options (middle) */ |
168 | #define B43_SHM_SH_HOSTFHI 0x0062 /* Hostflags for ucode options (high) */ | |
e4d6b795 MB |
169 | #define B43_SHM_SH_RFATT 0x0064 /* Current radio attenuation value */ |
170 | #define B43_SHM_SH_RADAR 0x0066 /* Radar register */ | |
171 | #define B43_SHM_SH_PHYTXNOI 0x006E /* PHY noise directly after TX (lower 8bit only) */ | |
172 | #define B43_SHM_SH_RFRXSP1 0x0072 /* RF RX SP Register 1 */ | |
173 | #define B43_SHM_SH_CHAN 0x00A0 /* Current channel (low 8bit only) */ | |
174 | #define B43_SHM_SH_CHAN_5GHZ 0x0100 /* Bit set, if 5Ghz channel */ | |
175 | #define B43_SHM_SH_BCMCFIFOID 0x0108 /* Last posted cookie to the bcast/mcast FIFO */ | |
176 | /* SHM_SHARED TX FIFO variables */ | |
177 | #define B43_SHM_SH_SIZE01 0x0098 /* TX FIFO size for FIFO 0 (low) and 1 (high) */ | |
178 | #define B43_SHM_SH_SIZE23 0x009A /* TX FIFO size for FIFO 2 and 3 */ | |
179 | #define B43_SHM_SH_SIZE45 0x009C /* TX FIFO size for FIFO 4 and 5 */ | |
180 | #define B43_SHM_SH_SIZE67 0x009E /* TX FIFO size for FIFO 6 and 7 */ | |
181 | /* SHM_SHARED background noise */ | |
182 | #define B43_SHM_SH_JSSI0 0x0088 /* Measure JSSI 0 */ | |
183 | #define B43_SHM_SH_JSSI1 0x008A /* Measure JSSI 1 */ | |
184 | #define B43_SHM_SH_JSSIAUX 0x008C /* Measure JSSI AUX */ | |
185 | /* SHM_SHARED crypto engine */ | |
186 | #define B43_SHM_SH_DEFAULTIV 0x003C /* Default IV location */ | |
187 | #define B43_SHM_SH_NRRXTRANS 0x003E /* # of soft RX transmitter addresses (max 8) */ | |
188 | #define B43_SHM_SH_KTP 0x0056 /* Key table pointer */ | |
189 | #define B43_SHM_SH_TKIPTSCTTAK 0x0318 | |
190 | #define B43_SHM_SH_KEYIDXBLOCK 0x05D4 /* Key index/algorithm block (v4 firmware) */ | |
191 | #define B43_SHM_SH_PSM 0x05F4 /* PSM transmitter address match block (rev < 5) */ | |
192 | /* SHM_SHARED WME variables */ | |
193 | #define B43_SHM_SH_EDCFSTAT 0x000E /* EDCF status */ | |
194 | #define B43_SHM_SH_TXFCUR 0x0030 /* TXF current index */ | |
195 | #define B43_SHM_SH_EDCFQ 0x0240 /* EDCF Q info */ | |
196 | /* SHM_SHARED powersave mode related */ | |
197 | #define B43_SHM_SH_SLOTT 0x0010 /* Slot time */ | |
198 | #define B43_SHM_SH_DTIMPER 0x0012 /* DTIM period */ | |
199 | #define B43_SHM_SH_NOSLPZNATDTIM 0x004C /* NOSLPZNAT DTIM */ | |
280d0e16 | 200 | /* SHM_SHARED beacon/AP variables */ |
e4d6b795 MB |
201 | #define B43_SHM_SH_BTL0 0x0018 /* Beacon template length 0 */ |
202 | #define B43_SHM_SH_BTL1 0x001A /* Beacon template length 1 */ | |
203 | #define B43_SHM_SH_BTSFOFF 0x001C /* Beacon TSF offset */ | |
204 | #define B43_SHM_SH_TIMBPOS 0x001E /* TIM B position in beacon */ | |
280d0e16 MB |
205 | #define B43_SHM_SH_DTIMP 0x0012 /* DTIP period */ |
206 | #define B43_SHM_SH_MCASTCOOKIE 0x00A8 /* Last bcast/mcast frame ID */ | |
e4d6b795 MB |
207 | #define B43_SHM_SH_SFFBLIM 0x0044 /* Short frame fallback retry limit */ |
208 | #define B43_SHM_SH_LFFBLIM 0x0046 /* Long frame fallback retry limit */ | |
209 | #define B43_SHM_SH_BEACPHYCTL 0x0054 /* Beacon PHY TX control word (see PHY TX control) */ | |
280d0e16 | 210 | #define B43_SHM_SH_EXTNPHYCTL 0x00B0 /* Extended bytes for beacon PHY control (N) */ |
e4d6b795 MB |
211 | /* SHM_SHARED ACK/CTS control */ |
212 | #define B43_SHM_SH_ACKCTSPHYCTL 0x0022 /* ACK/CTS PHY control word (see PHY TX control) */ | |
213 | /* SHM_SHARED probe response variables */ | |
214 | #define B43_SHM_SH_PRSSID 0x0160 /* Probe Response SSID */ | |
215 | #define B43_SHM_SH_PRSSIDLEN 0x0048 /* Probe Response SSID length */ | |
216 | #define B43_SHM_SH_PRTLEN 0x004A /* Probe Response template length */ | |
217 | #define B43_SHM_SH_PRMAXTIME 0x0074 /* Probe Response max time */ | |
218 | #define B43_SHM_SH_PRPHYCTL 0x0188 /* Probe Response PHY TX control word */ | |
219 | /* SHM_SHARED rate tables */ | |
220 | #define B43_SHM_SH_OFDMDIRECT 0x01C0 /* Pointer to OFDM direct map */ | |
221 | #define B43_SHM_SH_OFDMBASIC 0x01E0 /* Pointer to OFDM basic rate map */ | |
222 | #define B43_SHM_SH_CCKDIRECT 0x0200 /* Pointer to CCK direct map */ | |
223 | #define B43_SHM_SH_CCKBASIC 0x0220 /* Pointer to CCK basic rate map */ | |
224 | /* SHM_SHARED microcode soft registers */ | |
225 | #define B43_SHM_SH_UCODEREV 0x0000 /* Microcode revision */ | |
226 | #define B43_SHM_SH_UCODEPATCH 0x0002 /* Microcode patchlevel */ | |
227 | #define B43_SHM_SH_UCODEDATE 0x0004 /* Microcode date */ | |
228 | #define B43_SHM_SH_UCODETIME 0x0006 /* Microcode time */ | |
229 | #define B43_SHM_SH_UCODESTAT 0x0040 /* Microcode debug status code */ | |
230 | #define B43_SHM_SH_UCODESTAT_INVALID 0 | |
231 | #define B43_SHM_SH_UCODESTAT_INIT 1 | |
232 | #define B43_SHM_SH_UCODESTAT_ACTIVE 2 | |
233 | #define B43_SHM_SH_UCODESTAT_SUSP 3 /* suspended */ | |
234 | #define B43_SHM_SH_UCODESTAT_SLEEP 4 /* asleep (PS) */ | |
235 | #define B43_SHM_SH_MAXBFRAMES 0x0080 /* Maximum number of frames in a burst */ | |
236 | #define B43_SHM_SH_SPUWKUP 0x0094 /* pre-wakeup for synth PU in us */ | |
237 | #define B43_SHM_SH_PRETBTT 0x0096 /* pre-TBTT in us */ | |
238 | ||
239 | /* SHM_SCRATCH offsets */ | |
240 | #define B43_SHM_SC_MINCONT 0x0003 /* Minimum contention window */ | |
241 | #define B43_SHM_SC_MAXCONT 0x0004 /* Maximum contention window */ | |
242 | #define B43_SHM_SC_CURCONT 0x0005 /* Current contention window */ | |
243 | #define B43_SHM_SC_SRLIMIT 0x0006 /* Short retry count limit */ | |
244 | #define B43_SHM_SC_LRLIMIT 0x0007 /* Long retry count limit */ | |
245 | #define B43_SHM_SC_DTIMC 0x0008 /* Current DTIM count */ | |
246 | #define B43_SHM_SC_BTL0LEN 0x0015 /* Beacon 0 template length */ | |
247 | #define B43_SHM_SC_BTL1LEN 0x0016 /* Beacon 1 template length */ | |
248 | #define B43_SHM_SC_SCFB 0x0017 /* Short frame transmit count threshold for rate fallback */ | |
249 | #define B43_SHM_SC_LCFB 0x0018 /* Long frame transmit count threshold for rate fallback */ | |
250 | ||
251 | /* Hardware Radio Enable masks */ | |
252 | #define B43_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16) | |
253 | #define B43_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4) | |
254 | ||
255 | /* HostFlags. See b43_hf_read/write() */ | |
35f0d354 MB |
256 | #define B43_HF_ANTDIVHELP 0x000000000001ULL /* ucode antenna div helper */ |
257 | #define B43_HF_SYMW 0x000000000002ULL /* G-PHY SYM workaround */ | |
258 | #define B43_HF_RXPULLW 0x000000000004ULL /* RX pullup workaround */ | |
259 | #define B43_HF_CCKBOOST 0x000000000008ULL /* 4dB CCK power boost (exclusive with OFDM boost) */ | |
260 | #define B43_HF_BTCOEX 0x000000000010ULL /* Bluetooth coexistance */ | |
261 | #define B43_HF_GDCW 0x000000000020ULL /* G-PHY DC canceller filter bw workaround */ | |
262 | #define B43_HF_OFDMPABOOST 0x000000000040ULL /* Enable PA gain boost for OFDM */ | |
263 | #define B43_HF_ACPR 0x000000000080ULL /* Disable for Japan, channel 14 */ | |
264 | #define B43_HF_EDCF 0x000000000100ULL /* on if WME and MAC suspended */ | |
265 | #define B43_HF_TSSIRPSMW 0x000000000200ULL /* TSSI reset PSM ucode workaround */ | |
266 | #define B43_HF_20IN40IQW 0x000000000200ULL /* 20 in 40 MHz I/Q workaround (rev >= 13 only) */ | |
267 | #define B43_HF_DSCRQ 0x000000000400ULL /* Disable slow clock request in ucode */ | |
268 | #define B43_HF_ACIW 0x000000000800ULL /* ACI workaround: shift bits by 2 on PHY CRS */ | |
269 | #define B43_HF_2060W 0x000000001000ULL /* 2060 radio workaround */ | |
270 | #define B43_HF_RADARW 0x000000002000ULL /* Radar workaround */ | |
271 | #define B43_HF_USEDEFKEYS 0x000000004000ULL /* Enable use of default keys */ | |
272 | #define B43_HF_AFTERBURNER 0x000000008000ULL /* Afterburner enabled */ | |
273 | #define B43_HF_BT4PRIOCOEX 0x000000010000ULL /* Bluetooth 4-priority coexistance */ | |
274 | #define B43_HF_FWKUP 0x000000020000ULL /* Fast wake-up ucode */ | |
275 | #define B43_HF_VCORECALC 0x000000040000ULL /* Force VCO recalculation when powering up synthpu */ | |
276 | #define B43_HF_PCISCW 0x000000080000ULL /* PCI slow clock workaround */ | |
277 | #define B43_HF_4318TSSI 0x000000200000ULL /* 4318 TSSI */ | |
278 | #define B43_HF_FBCMCFIFO 0x000000400000ULL /* Flush bcast/mcast FIFO immediately */ | |
279 | #define B43_HF_HWPCTL 0x000000800000ULL /* Enable hardwarre power control */ | |
280 | #define B43_HF_BTCOEXALT 0x000001000000ULL /* Bluetooth coexistance in alternate pins */ | |
281 | #define B43_HF_TXBTCHECK 0x000002000000ULL /* Bluetooth check during transmission */ | |
282 | #define B43_HF_SKCFPUP 0x000004000000ULL /* Skip CFP update */ | |
283 | #define B43_HF_N40W 0x000008000000ULL /* N PHY 40 MHz workaround (rev >= 13 only) */ | |
284 | #define B43_HF_ANTSEL 0x000020000000ULL /* Antenna selection (for testing antenna div.) */ | |
285 | #define B43_HF_BT3COEXT 0x000020000000ULL /* Bluetooth 3-wire coexistence (rev >= 13 only) */ | |
286 | #define B43_HF_BTCANT 0x000040000000ULL /* Bluetooth coexistence (antenna mode) (rev >= 13 only) */ | |
287 | #define B43_HF_ANTSELEN 0x000100000000ULL /* Antenna selection enabled (rev >= 13 only) */ | |
288 | #define B43_HF_ANTSELMODE 0x000200000000ULL /* Antenna selection mode (rev >= 13 only) */ | |
289 | #define B43_HF_MLADVW 0x001000000000ULL /* N PHY ML ADV workaround (rev >= 13 only) */ | |
290 | #define B43_HF_PR45960W 0x080000000000ULL /* PR 45960 workaround (rev >= 13 only) */ | |
e4d6b795 MB |
291 | |
292 | /* MacFilter offsets. */ | |
293 | #define B43_MACFILTER_SELF 0x0000 | |
294 | #define B43_MACFILTER_BSSID 0x0003 | |
295 | ||
296 | /* PowerControl */ | |
297 | #define B43_PCTL_IN 0xB0 | |
298 | #define B43_PCTL_OUT 0xB4 | |
299 | #define B43_PCTL_OUTENABLE 0xB8 | |
300 | #define B43_PCTL_XTAL_POWERUP 0x40 | |
301 | #define B43_PCTL_PLL_POWERDOWN 0x80 | |
302 | ||
303 | /* PowerControl Clock Modes */ | |
304 | #define B43_PCTL_CLK_FAST 0x00 | |
305 | #define B43_PCTL_CLK_SLOW 0x01 | |
306 | #define B43_PCTL_CLK_DYNAMIC 0x02 | |
307 | ||
308 | #define B43_PCTL_FORCE_SLOW 0x0800 | |
309 | #define B43_PCTL_FORCE_PLL 0x1000 | |
310 | #define B43_PCTL_DYN_XTAL 0x2000 | |
311 | ||
312 | /* PHYVersioning */ | |
313 | #define B43_PHYTYPE_A 0x00 | |
314 | #define B43_PHYTYPE_B 0x01 | |
315 | #define B43_PHYTYPE_G 0x02 | |
d987160b MB |
316 | #define B43_PHYTYPE_N 0x04 |
317 | #define B43_PHYTYPE_LP 0x05 | |
e4d6b795 MB |
318 | |
319 | /* PHYRegisters */ | |
320 | #define B43_PHY_ILT_A_CTRL 0x0072 | |
321 | #define B43_PHY_ILT_A_DATA1 0x0073 | |
322 | #define B43_PHY_ILT_A_DATA2 0x0074 | |
323 | #define B43_PHY_G_LO_CONTROL 0x0810 | |
324 | #define B43_PHY_ILT_G_CTRL 0x0472 | |
325 | #define B43_PHY_ILT_G_DATA1 0x0473 | |
326 | #define B43_PHY_ILT_G_DATA2 0x0474 | |
327 | #define B43_PHY_A_PCTL 0x007B | |
328 | #define B43_PHY_G_PCTL 0x0029 | |
329 | #define B43_PHY_A_CRS 0x0029 | |
330 | #define B43_PHY_RADIO_BITFIELD 0x0401 | |
331 | #define B43_PHY_G_CRS 0x0429 | |
332 | #define B43_PHY_NRSSILT_CTRL 0x0803 | |
333 | #define B43_PHY_NRSSILT_DATA 0x0804 | |
334 | ||
335 | /* RadioRegisters */ | |
336 | #define B43_RADIOCTL_ID 0x01 | |
337 | ||
338 | /* MAC Control bitfield */ | |
339 | #define B43_MACCTL_ENABLED 0x00000001 /* MAC Enabled */ | |
340 | #define B43_MACCTL_PSM_RUN 0x00000002 /* Run Microcode */ | |
341 | #define B43_MACCTL_PSM_JMP0 0x00000004 /* Microcode jump to 0 */ | |
342 | #define B43_MACCTL_SHM_ENABLED 0x00000100 /* SHM Enabled */ | |
343 | #define B43_MACCTL_SHM_UPPER 0x00000200 /* SHM Upper */ | |
344 | #define B43_MACCTL_IHR_ENABLED 0x00000400 /* IHR Region Enabled */ | |
345 | #define B43_MACCTL_PSM_DBG 0x00002000 /* Microcode debugging enabled */ | |
346 | #define B43_MACCTL_GPOUTSMSK 0x0000C000 /* GPOUT Select Mask */ | |
347 | #define B43_MACCTL_BE 0x00010000 /* Big Endian mode */ | |
348 | #define B43_MACCTL_INFRA 0x00020000 /* Infrastructure mode */ | |
349 | #define B43_MACCTL_AP 0x00040000 /* AccessPoint mode */ | |
350 | #define B43_MACCTL_RADIOLOCK 0x00080000 /* Radio lock */ | |
351 | #define B43_MACCTL_BEACPROMISC 0x00100000 /* Beacon Promiscuous */ | |
352 | #define B43_MACCTL_KEEP_BADPLCP 0x00200000 /* Keep frames with bad PLCP */ | |
353 | #define B43_MACCTL_KEEP_CTL 0x00400000 /* Keep control frames */ | |
354 | #define B43_MACCTL_KEEP_BAD 0x00800000 /* Keep bad frames (FCS) */ | |
355 | #define B43_MACCTL_PROMISC 0x01000000 /* Promiscuous mode */ | |
356 | #define B43_MACCTL_HWPS 0x02000000 /* Hardware Power Saving */ | |
357 | #define B43_MACCTL_AWAKE 0x04000000 /* Device is awake */ | |
358 | #define B43_MACCTL_CLOSEDNET 0x08000000 /* Closed net (no SSID bcast) */ | |
359 | #define B43_MACCTL_TBTTHOLD 0x10000000 /* TBTT Hold */ | |
360 | #define B43_MACCTL_DISCTXSTAT 0x20000000 /* Discard TX status */ | |
361 | #define B43_MACCTL_DISCPMQ 0x40000000 /* Discard Power Management Queue */ | |
362 | #define B43_MACCTL_GMODE 0x80000000 /* G Mode */ | |
363 | ||
aa6c7ae2 MB |
364 | /* MAC Command bitfield */ |
365 | #define B43_MACCMD_BEACON0_VALID 0x00000001 /* Beacon 0 in template RAM is busy/valid */ | |
366 | #define B43_MACCMD_BEACON1_VALID 0x00000002 /* Beacon 1 in template RAM is busy/valid */ | |
367 | #define B43_MACCMD_DFQ_VALID 0x00000004 /* Directed frame queue valid (IBSS PS mode, ATIM) */ | |
368 | #define B43_MACCMD_CCA 0x00000008 /* Clear channel assessment */ | |
369 | #define B43_MACCMD_BGNOISE 0x00000010 /* Background noise */ | |
370 | ||
96c755a3 | 371 | /* 802.11 core specific TM State Low (SSB_TMSLOW) flags */ |
e4d6b795 | 372 | #define B43_TMSLOW_GMODE 0x20000000 /* G Mode Enable */ |
96c755a3 MB |
373 | #define B43_TMSLOW_PHYCLKSPEED 0x00C00000 /* PHY clock speed mask (N-PHY only) */ |
374 | #define B43_TMSLOW_PHYCLKSPEED_40MHZ 0x00000000 /* 40 MHz PHY */ | |
375 | #define B43_TMSLOW_PHYCLKSPEED_80MHZ 0x00400000 /* 80 MHz PHY */ | |
376 | #define B43_TMSLOW_PHYCLKSPEED_160MHZ 0x00800000 /* 160 MHz PHY */ | |
377 | #define B43_TMSLOW_PLLREFSEL 0x00200000 /* PLL Frequency Reference Select (rev >= 5) */ | |
e4d6b795 MB |
378 | #define B43_TMSLOW_MACPHYCLKEN 0x00100000 /* MAC PHY Clock Control Enable (rev >= 5) */ |
379 | #define B43_TMSLOW_PHYRESET 0x00080000 /* PHY Reset */ | |
380 | #define B43_TMSLOW_PHYCLKEN 0x00040000 /* PHY Clock Enable */ | |
381 | ||
96c755a3 MB |
382 | /* 802.11 core specific TM State High (SSB_TMSHIGH) flags */ |
383 | #define B43_TMSHIGH_DUALBAND_PHY 0x00080000 /* Dualband PHY available */ | |
e4d6b795 | 384 | #define B43_TMSHIGH_FCLOCK 0x00040000 /* Fast Clock Available (rev >= 5) */ |
96c755a3 MB |
385 | #define B43_TMSHIGH_HAVE_5GHZ_PHY 0x00020000 /* 5 GHz PHY available (rev >= 5) */ |
386 | #define B43_TMSHIGH_HAVE_2GHZ_PHY 0x00010000 /* 2.4 GHz PHY available (rev >= 5) */ | |
e4d6b795 MB |
387 | |
388 | /* Generic-Interrupt reasons. */ | |
389 | #define B43_IRQ_MAC_SUSPENDED 0x00000001 | |
390 | #define B43_IRQ_BEACON 0x00000002 | |
391 | #define B43_IRQ_TBTT_INDI 0x00000004 | |
392 | #define B43_IRQ_BEACON_TX_OK 0x00000008 | |
393 | #define B43_IRQ_BEACON_CANCEL 0x00000010 | |
394 | #define B43_IRQ_ATIM_END 0x00000020 | |
395 | #define B43_IRQ_PMQ 0x00000040 | |
396 | #define B43_IRQ_PIO_WORKAROUND 0x00000100 | |
397 | #define B43_IRQ_MAC_TXERR 0x00000200 | |
398 | #define B43_IRQ_PHY_TXERR 0x00000800 | |
399 | #define B43_IRQ_PMEVENT 0x00001000 | |
400 | #define B43_IRQ_TIMER0 0x00002000 | |
401 | #define B43_IRQ_TIMER1 0x00004000 | |
402 | #define B43_IRQ_DMA 0x00008000 | |
403 | #define B43_IRQ_TXFIFO_FLUSH_OK 0x00010000 | |
404 | #define B43_IRQ_CCA_MEASURE_OK 0x00020000 | |
405 | #define B43_IRQ_NOISESAMPLE_OK 0x00040000 | |
406 | #define B43_IRQ_UCODE_DEBUG 0x08000000 | |
407 | #define B43_IRQ_RFKILL 0x10000000 | |
408 | #define B43_IRQ_TX_OK 0x20000000 | |
409 | #define B43_IRQ_PHY_G_CHANGED 0x40000000 | |
410 | #define B43_IRQ_TIMEOUT 0x80000000 | |
411 | ||
412 | #define B43_IRQ_ALL 0xFFFFFFFF | |
e40ac414 | 413 | #define B43_IRQ_MASKTEMPLATE (B43_IRQ_TBTT_INDI | \ |
e4d6b795 MB |
414 | B43_IRQ_ATIM_END | \ |
415 | B43_IRQ_PMQ | \ | |
416 | B43_IRQ_MAC_TXERR | \ | |
417 | B43_IRQ_PHY_TXERR | \ | |
418 | B43_IRQ_DMA | \ | |
419 | B43_IRQ_TXFIFO_FLUSH_OK | \ | |
420 | B43_IRQ_NOISESAMPLE_OK | \ | |
421 | B43_IRQ_UCODE_DEBUG | \ | |
422 | B43_IRQ_RFKILL | \ | |
423 | B43_IRQ_TX_OK) | |
424 | ||
425 | /* Device specific rate values. | |
426 | * The actual values defined here are (rate_in_mbps * 2). | |
427 | * Some code depends on this. Don't change it. */ | |
428 | #define B43_CCK_RATE_1MB 0x02 | |
429 | #define B43_CCK_RATE_2MB 0x04 | |
430 | #define B43_CCK_RATE_5MB 0x0B | |
431 | #define B43_CCK_RATE_11MB 0x16 | |
432 | #define B43_OFDM_RATE_6MB 0x0C | |
433 | #define B43_OFDM_RATE_9MB 0x12 | |
434 | #define B43_OFDM_RATE_12MB 0x18 | |
435 | #define B43_OFDM_RATE_18MB 0x24 | |
436 | #define B43_OFDM_RATE_24MB 0x30 | |
437 | #define B43_OFDM_RATE_36MB 0x48 | |
438 | #define B43_OFDM_RATE_48MB 0x60 | |
439 | #define B43_OFDM_RATE_54MB 0x6C | |
440 | /* Convert a b43 rate value to a rate in 100kbps */ | |
441 | #define B43_RATE_TO_BASE100KBPS(rate) (((rate) * 10) / 2) | |
442 | ||
443 | #define B43_DEFAULT_SHORT_RETRY_LIMIT 7 | |
444 | #define B43_DEFAULT_LONG_RETRY_LIMIT 4 | |
445 | ||
00e0b8cb SB |
446 | #define B43_PHY_TX_BADNESS_LIMIT 1000 |
447 | ||
e4d6b795 MB |
448 | /* Max size of a security key */ |
449 | #define B43_SEC_KEYSIZE 16 | |
450 | /* Security algorithms. */ | |
451 | enum { | |
452 | B43_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */ | |
453 | B43_SEC_ALGO_WEP40, | |
454 | B43_SEC_ALGO_TKIP, | |
455 | B43_SEC_ALGO_AES, | |
456 | B43_SEC_ALGO_WEP104, | |
457 | B43_SEC_ALGO_AES_LEGACY, | |
458 | }; | |
459 | ||
460 | struct b43_dmaring; | |
e4d6b795 MB |
461 | |
462 | /* The firmware file header */ | |
463 | #define B43_FW_TYPE_UCODE 'u' | |
464 | #define B43_FW_TYPE_PCM 'p' | |
465 | #define B43_FW_TYPE_IV 'i' | |
466 | struct b43_fw_header { | |
467 | /* File type */ | |
468 | u8 type; | |
469 | /* File format version */ | |
470 | u8 ver; | |
471 | u8 __padding[2]; | |
472 | /* Size of the data. For ucode and PCM this is in bytes. | |
473 | * For IV this is number-of-ivs. */ | |
474 | __be32 size; | |
475 | } __attribute__((__packed__)); | |
476 | ||
477 | /* Initial Value file format */ | |
478 | #define B43_IV_OFFSET_MASK 0x7FFF | |
479 | #define B43_IV_32BIT 0x8000 | |
480 | struct b43_iv { | |
481 | __be16 offset_size; | |
482 | union { | |
483 | __be16 d16; | |
484 | __be32 d32; | |
485 | } data __attribute__((__packed__)); | |
486 | } __attribute__((__packed__)); | |
487 | ||
488 | ||
e4d6b795 | 489 | struct b43_phy { |
bb1eeff1 MB |
490 | /* Band support flags. */ |
491 | bool supports_2ghz; | |
492 | bool supports_5ghz; | |
493 | ||
e4d6b795 MB |
494 | /* GMODE bit enabled? */ |
495 | bool gmode; | |
e4d6b795 MB |
496 | |
497 | /* Analog Type */ | |
498 | u8 analog; | |
499 | /* B43_PHYTYPE_ */ | |
500 | u8 type; | |
501 | /* PHY revision number. */ | |
502 | u8 rev; | |
503 | ||
504 | /* Radio versioning */ | |
505 | u16 radio_manuf; /* Radio manufacturer */ | |
506 | u16 radio_ver; /* Radio version */ | |
507 | u8 radio_rev; /* Radio revision */ | |
508 | ||
e4d6b795 MB |
509 | bool dyn_tssi_tbl; /* tssi2dbm is kmalloc()ed. */ |
510 | ||
511 | /* ACI (adjacent channel interference) flags. */ | |
512 | bool aci_enable; | |
513 | bool aci_wlan_automatic; | |
514 | bool aci_hw_rssi; | |
515 | ||
fda9abcf MB |
516 | /* Radio switched on/off */ |
517 | bool radio_on; | |
518 | struct { | |
519 | /* Values saved when turning the radio off. | |
520 | * They are needed when turning it on again. */ | |
521 | bool valid; | |
522 | u16 rfover; | |
523 | u16 rfoverval; | |
524 | } radio_off_context; | |
525 | ||
e4d6b795 MB |
526 | u16 minlowsig[2]; |
527 | u16 minlowsigpos[2]; | |
528 | ||
529 | /* TSSI to dBm table in use */ | |
530 | const s8 *tssi2dbm; | |
531 | /* Target idle TSSI */ | |
532 | int tgt_idle_tssi; | |
533 | /* Current idle TSSI */ | |
534 | int cur_idle_tssi; | |
535 | ||
536 | /* LocalOscillator control values. */ | |
537 | struct b43_txpower_lo_control *lo_control; | |
538 | /* Values from b43_calc_loopback_gain() */ | |
539 | s16 max_lb_gain; /* Maximum Loopback gain in hdB */ | |
540 | s16 trsw_rx_gain; /* TRSW RX gain in hdB */ | |
541 | s16 lna_lod_gain; /* LNA lod */ | |
542 | s16 lna_gain; /* LNA */ | |
543 | s16 pga_gain; /* PGA */ | |
544 | ||
e4d6b795 MB |
545 | /* Desired TX power level (in dBm). |
546 | * This is set by the user and adjusted in b43_phy_xmitpower(). */ | |
547 | u8 power_level; | |
548 | /* A-PHY TX Power control value. */ | |
549 | u16 txpwr_offset; | |
550 | ||
551 | /* Current TX power level attenuation control values */ | |
552 | struct b43_bbatt bbatt; | |
553 | struct b43_rfatt rfatt; | |
554 | u8 tx_control; /* B43_TXCTL_XXX */ | |
f31800d8 | 555 | |
e4d6b795 MB |
556 | /* Hardware Power Control enabled? */ |
557 | bool hardware_power_control; | |
558 | ||
559 | /* Current Interference Mitigation mode */ | |
560 | int interfmode; | |
561 | /* Stack of saved values from the Interference Mitigation code. | |
562 | * Each value in the stack is layed out as follows: | |
563 | * bit 0-11: offset | |
564 | * bit 12-15: register ID | |
565 | * bit 16-32: value | |
566 | * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT | |
567 | */ | |
568 | #define B43_INTERFSTACK_SIZE 26 | |
569 | u32 interfstack[B43_INTERFSTACK_SIZE]; //FIXME: use a data structure | |
570 | ||
571 | /* Saved values from the NRSSI Slope calculation */ | |
572 | s16 nrssi[2]; | |
573 | s32 nrssislope; | |
574 | /* In memory nrssi lookup table. */ | |
575 | s8 nrssi_lt[64]; | |
576 | ||
577 | /* current channel */ | |
578 | u8 channel; | |
579 | ||
580 | u16 lofcal; | |
581 | ||
582 | u16 initval; //FIXME rename? | |
61bca6eb | 583 | |
00e0b8cb SB |
584 | /* PHY TX errors counter. */ |
585 | atomic_t txerr_cnt; | |
8ed7fc48 MB |
586 | |
587 | /* The device does address auto increment for the OFDM tables. | |
588 | * We cache the previously used address here and omit the address | |
589 | * write on the next table access, if possible. */ | |
590 | u16 ofdmtab_addr; /* The address currently set in hardware. */ | |
591 | enum { /* The last data flow direction. */ | |
592 | B43_OFDMTAB_DIRECTION_UNKNOWN = 0, | |
593 | B43_OFDMTAB_DIRECTION_READ, | |
594 | B43_OFDMTAB_DIRECTION_WRITE, | |
595 | } ofdmtab_addr_direction; | |
f31800d8 MB |
596 | |
597 | #if B43_DEBUG | |
598 | /* Manual TX-power control enabled? */ | |
599 | bool manual_txpower_control; | |
600 | /* PHY registers locked by b43_phy_lock()? */ | |
601 | bool phy_locked; | |
602 | #endif /* B43_DEBUG */ | |
e4d6b795 MB |
603 | }; |
604 | ||
605 | /* Data structures for DMA transmission, per 80211 core. */ | |
606 | struct b43_dma { | |
b27faf8e MB |
607 | struct b43_dmaring *tx_ring_AC_BK; /* Background */ |
608 | struct b43_dmaring *tx_ring_AC_BE; /* Best Effort */ | |
609 | struct b43_dmaring *tx_ring_AC_VI; /* Video */ | |
610 | struct b43_dmaring *tx_ring_AC_VO; /* Voice */ | |
611 | struct b43_dmaring *tx_ring_mcast; /* Multicast */ | |
612 | ||
613 | struct b43_dmaring *rx_ring; | |
e4d6b795 MB |
614 | }; |
615 | ||
5100d5ac MB |
616 | struct b43_pio_txqueue; |
617 | struct b43_pio_rxqueue; | |
618 | ||
619 | /* Data structures for PIO transmission, per 80211 core. */ | |
620 | struct b43_pio { | |
621 | struct b43_pio_txqueue *tx_queue_AC_BK; /* Background */ | |
622 | struct b43_pio_txqueue *tx_queue_AC_BE; /* Best Effort */ | |
623 | struct b43_pio_txqueue *tx_queue_AC_VI; /* Video */ | |
624 | struct b43_pio_txqueue *tx_queue_AC_VO; /* Voice */ | |
625 | struct b43_pio_txqueue *tx_queue_mcast; /* Multicast */ | |
626 | ||
627 | struct b43_pio_rxqueue *rx_queue; | |
628 | }; | |
629 | ||
e4d6b795 MB |
630 | /* Context information for a noise calculation (Link Quality). */ |
631 | struct b43_noise_calculation { | |
632 | u8 channel_at_start; | |
633 | bool calculation_running; | |
634 | u8 nr_samples; | |
635 | s8 samples[8][4]; | |
636 | }; | |
637 | ||
638 | struct b43_stats { | |
639 | u8 link_noise; | |
640 | /* Store the last TX/RX times here for updating the leds. */ | |
641 | unsigned long last_tx; | |
642 | unsigned long last_rx; | |
643 | }; | |
644 | ||
645 | struct b43_key { | |
646 | /* If keyconf is NULL, this key is disabled. | |
647 | * keyconf is a cookie. Don't derefenrence it outside of the set_key | |
648 | * path, because b43 doesn't own it. */ | |
649 | struct ieee80211_key_conf *keyconf; | |
650 | u8 algorithm; | |
651 | }; | |
652 | ||
e6f5b934 MB |
653 | /* SHM offsets to the QOS data structures for the 4 different queues. */ |
654 | #define B43_QOS_PARAMS(queue) (B43_SHM_SH_EDCFQ + \ | |
655 | (B43_NR_QOSPARAMS * sizeof(u16) * (queue))) | |
656 | #define B43_QOS_BACKGROUND B43_QOS_PARAMS(0) | |
657 | #define B43_QOS_BESTEFFORT B43_QOS_PARAMS(1) | |
658 | #define B43_QOS_VIDEO B43_QOS_PARAMS(2) | |
659 | #define B43_QOS_VOICE B43_QOS_PARAMS(3) | |
660 | ||
661 | /* QOS parameter hardware data structure offsets. */ | |
662 | #define B43_NR_QOSPARAMS 22 | |
663 | enum { | |
664 | B43_QOSPARAM_TXOP = 0, | |
665 | B43_QOSPARAM_CWMIN, | |
666 | B43_QOSPARAM_CWMAX, | |
667 | B43_QOSPARAM_CWCUR, | |
668 | B43_QOSPARAM_AIFS, | |
669 | B43_QOSPARAM_BSLOTS, | |
670 | B43_QOSPARAM_REGGAP, | |
671 | B43_QOSPARAM_STATUS, | |
672 | }; | |
673 | ||
674 | /* QOS parameters for a queue. */ | |
675 | struct b43_qos_params { | |
676 | /* The QOS parameters */ | |
677 | struct ieee80211_tx_queue_params p; | |
678 | /* Does this need to get uploaded to hardware? */ | |
679 | bool need_hw_update; | |
680 | }; | |
681 | ||
e4d6b795 MB |
682 | struct b43_wldev; |
683 | ||
684 | /* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */ | |
685 | struct b43_wl { | |
686 | /* Pointer to the active wireless device on this chip */ | |
687 | struct b43_wldev *current_dev; | |
688 | /* Pointer to the ieee80211 hardware data structure */ | |
689 | struct ieee80211_hw *hw; | |
690 | ||
e4d6b795 | 691 | struct mutex mutex; |
280d0e16 | 692 | spinlock_t irq_lock; |
21a75d77 MB |
693 | /* R/W lock for data transmission. |
694 | * Transmissions on 2+ queues can run concurrently, but somebody else | |
695 | * might sync with TX by write_lock_irqsave()'ing. */ | |
696 | rwlock_t tx_lock; | |
280d0e16 | 697 | /* Lock for LEDs access. */ |
e4d6b795 | 698 | spinlock_t leds_lock; |
280d0e16 MB |
699 | /* Lock for SHM access. */ |
700 | spinlock_t shm_lock; | |
e4d6b795 MB |
701 | |
702 | /* We can only have one operating interface (802.11 core) | |
703 | * at a time. General information about this interface follows. | |
704 | */ | |
705 | ||
32bfd35d | 706 | struct ieee80211_vif *vif; |
e4d6b795 MB |
707 | /* The MAC address of the operating interface. */ |
708 | u8 mac_addr[ETH_ALEN]; | |
709 | /* Current BSSID */ | |
710 | u8 bssid[ETH_ALEN]; | |
711 | /* Interface type. (IEEE80211_IF_TYPE_XXX) */ | |
712 | int if_type; | |
e4d6b795 MB |
713 | /* Is the card operating in AP, STA or IBSS mode? */ |
714 | bool operating; | |
4150c572 JB |
715 | /* filter flags */ |
716 | unsigned int filter_flags; | |
e4d6b795 MB |
717 | /* Stats about the wireless interface */ |
718 | struct ieee80211_low_level_stats ieee_stats; | |
719 | ||
720 | struct hwrng rng; | |
721 | u8 rng_initialized; | |
722 | char rng_name[30 + 1]; | |
723 | ||
8e9f7529 MB |
724 | /* The RF-kill button */ |
725 | struct b43_rfkill rfkill; | |
726 | ||
e4d6b795 MB |
727 | /* List of all wireless devices on this chip */ |
728 | struct list_head devlist; | |
729 | u8 nr_devs; | |
d42ce84a JB |
730 | |
731 | bool radiotap_enabled; | |
e66fee6a MB |
732 | |
733 | /* The beacon we are currently using (AP or IBSS mode). | |
734 | * This beacon stuff is protected by the irq_lock. */ | |
735 | struct sk_buff *current_beacon; | |
736 | bool beacon0_uploaded; | |
737 | bool beacon1_uploaded; | |
a82d9922 | 738 | struct work_struct beacon_update_trigger; |
e6f5b934 MB |
739 | |
740 | /* The current QOS parameters for the 4 queues. | |
741 | * This is protected by the irq_lock. */ | |
742 | struct b43_qos_params qos_params[4]; | |
743 | /* Workqueue for updating QOS parameters in hardware. */ | |
744 | struct work_struct qos_update_work; | |
e4d6b795 MB |
745 | }; |
746 | ||
61cb5dd6 MB |
747 | /* In-memory representation of a cached microcode file. */ |
748 | struct b43_firmware_file { | |
749 | const char *filename; | |
750 | const struct firmware *data; | |
751 | }; | |
752 | ||
e4d6b795 MB |
753 | /* Pointers to the firmware data and meta information about it. */ |
754 | struct b43_firmware { | |
755 | /* Microcode */ | |
61cb5dd6 | 756 | struct b43_firmware_file ucode; |
e4d6b795 | 757 | /* PCM code */ |
61cb5dd6 | 758 | struct b43_firmware_file pcm; |
e4d6b795 | 759 | /* Initial MMIO values for the firmware */ |
61cb5dd6 | 760 | struct b43_firmware_file initvals; |
e4d6b795 | 761 | /* Initial MMIO values for the firmware, band-specific */ |
61cb5dd6 MB |
762 | struct b43_firmware_file initvals_band; |
763 | ||
e4d6b795 MB |
764 | /* Firmware revision */ |
765 | u16 rev; | |
766 | /* Firmware patchlevel */ | |
767 | u16 patch; | |
768 | }; | |
769 | ||
770 | /* Device (802.11 core) initialization status. */ | |
771 | enum { | |
772 | B43_STAT_UNINIT = 0, /* Uninitialized. */ | |
773 | B43_STAT_INITIALIZED = 1, /* Initialized, but not started, yet. */ | |
774 | B43_STAT_STARTED = 2, /* Up and running. */ | |
775 | }; | |
776 | #define b43_status(wldev) atomic_read(&(wldev)->__init_status) | |
777 | #define b43_set_status(wldev, stat) do { \ | |
778 | atomic_set(&(wldev)->__init_status, (stat)); \ | |
779 | smp_wmb(); \ | |
780 | } while (0) | |
781 | ||
782 | /* XXX--- HOW LOCKING WORKS IN B43 ---XXX | |
783 | * | |
784 | * You should always acquire both, wl->mutex and wl->irq_lock unless: | |
785 | * - You don't need to acquire wl->irq_lock, if the interface is stopped. | |
786 | * - You don't need to acquire wl->mutex in the IRQ handler, IRQ tasklet | |
787 | * and packet TX path (and _ONLY_ there.) | |
788 | */ | |
789 | ||
790 | /* Data structure for one wireless device (802.11 core) */ | |
791 | struct b43_wldev { | |
792 | struct ssb_device *dev; | |
793 | struct b43_wl *wl; | |
794 | ||
795 | /* The device initialization status. | |
796 | * Use b43_status() to query. */ | |
797 | atomic_t __init_status; | |
798 | /* Saved init status for handling suspend. */ | |
799 | int suspend_init_status; | |
800 | ||
e4d6b795 | 801 | bool bad_frames_preempt; /* Use "Bad Frames Preemption" (default off) */ |
aa6c7ae2 | 802 | bool dfq_valid; /* Directed frame queue valid (IBSS PS mode, ATIM) */ |
e4d6b795 MB |
803 | bool short_slot; /* TRUE, if short slot timing is enabled. */ |
804 | bool radio_hw_enable; /* saved state of radio hardware enabled state */ | |
3506e0c4 | 805 | bool suspend_in_progress; /* TRUE, if we are in a suspend/resume cycle */ |
e4d6b795 MB |
806 | |
807 | /* PHY/Radio device. */ | |
808 | struct b43_phy phy; | |
03b29773 | 809 | |
5100d5ac MB |
810 | union { |
811 | /* DMA engines. */ | |
812 | struct b43_dma dma; | |
813 | /* PIO engines. */ | |
814 | struct b43_pio pio; | |
815 | }; | |
816 | /* Use b43_using_pio_transfers() to check whether we are using | |
817 | * DMA or PIO data transfers. */ | |
818 | bool __using_pio_transfers; | |
e4d6b795 MB |
819 | |
820 | /* Various statistics about the physical device. */ | |
821 | struct b43_stats stats; | |
822 | ||
21954c36 MB |
823 | /* The device LEDs. */ |
824 | struct b43_led led_tx; | |
825 | struct b43_led led_rx; | |
826 | struct b43_led led_assoc; | |
8e9f7529 | 827 | struct b43_led led_radio; |
e4d6b795 MB |
828 | |
829 | /* Reason code of the last interrupt. */ | |
830 | u32 irq_reason; | |
831 | u32 dma_reason[6]; | |
832 | /* saved irq enable/disable state bitfield. */ | |
833 | u32 irq_savedstate; | |
834 | /* Link Quality calculation context. */ | |
835 | struct b43_noise_calculation noisecalc; | |
836 | /* if > 0 MAC is suspended. if == 0 MAC is enabled. */ | |
837 | int mac_suspended; | |
838 | ||
839 | /* Interrupt Service Routine tasklet (bottom-half) */ | |
840 | struct tasklet_struct isr_tasklet; | |
841 | ||
842 | /* Periodic tasks */ | |
843 | struct delayed_work periodic_work; | |
844 | unsigned int periodic_state; | |
845 | ||
846 | struct work_struct restart_work; | |
847 | ||
848 | /* encryption/decryption */ | |
849 | u16 ktp; /* Key table pointer */ | |
850 | u8 max_nr_keys; | |
851 | struct b43_key key[58]; | |
852 | ||
e4d6b795 MB |
853 | /* Firmware data */ |
854 | struct b43_firmware fw; | |
855 | ||
856 | /* Devicelist in struct b43_wl (all 802.11 cores) */ | |
857 | struct list_head list; | |
858 | ||
859 | /* Debugging stuff follows. */ | |
860 | #ifdef CONFIG_B43_DEBUG | |
861 | struct b43_dfsentry *dfsentry; | |
862 | #endif | |
863 | }; | |
864 | ||
865 | static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw) | |
866 | { | |
867 | return hw->priv; | |
868 | } | |
869 | ||
e4d6b795 MB |
870 | static inline struct b43_wldev *dev_to_b43_wldev(struct device *dev) |
871 | { | |
872 | struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); | |
873 | return ssb_get_drvdata(ssb_dev); | |
874 | } | |
875 | ||
876 | /* Is the device operating in a specified mode (IEEE80211_IF_TYPE_XXX). */ | |
877 | static inline int b43_is_mode(struct b43_wl *wl, int type) | |
878 | { | |
e4d6b795 MB |
879 | return (wl->operating && wl->if_type == type); |
880 | } | |
881 | ||
882 | static inline u16 b43_read16(struct b43_wldev *dev, u16 offset) | |
883 | { | |
884 | return ssb_read16(dev->dev, offset); | |
885 | } | |
886 | ||
887 | static inline void b43_write16(struct b43_wldev *dev, u16 offset, u16 value) | |
888 | { | |
889 | ssb_write16(dev->dev, offset, value); | |
890 | } | |
891 | ||
892 | static inline u32 b43_read32(struct b43_wldev *dev, u16 offset) | |
893 | { | |
894 | return ssb_read32(dev->dev, offset); | |
895 | } | |
896 | ||
897 | static inline void b43_write32(struct b43_wldev *dev, u16 offset, u32 value) | |
898 | { | |
899 | ssb_write32(dev->dev, offset, value); | |
900 | } | |
901 | ||
5100d5ac MB |
902 | static inline bool b43_using_pio_transfers(struct b43_wldev *dev) |
903 | { | |
904 | #ifdef CONFIG_B43_PIO | |
905 | return dev->__using_pio_transfers; | |
906 | #else | |
907 | return 0; | |
908 | #endif | |
909 | } | |
910 | ||
911 | #ifdef CONFIG_B43_FORCE_PIO | |
912 | # define B43_FORCE_PIO 1 | |
913 | #else | |
914 | # define B43_FORCE_PIO 0 | |
915 | #endif | |
916 | ||
917 | ||
e4d6b795 MB |
918 | /* Message printing */ |
919 | void b43info(struct b43_wl *wl, const char *fmt, ...) | |
920 | __attribute__ ((format(printf, 2, 3))); | |
921 | void b43err(struct b43_wl *wl, const char *fmt, ...) | |
922 | __attribute__ ((format(printf, 2, 3))); | |
923 | void b43warn(struct b43_wl *wl, const char *fmt, ...) | |
924 | __attribute__ ((format(printf, 2, 3))); | |
925 | #if B43_DEBUG | |
926 | void b43dbg(struct b43_wl *wl, const char *fmt, ...) | |
927 | __attribute__ ((format(printf, 2, 3))); | |
928 | #else /* DEBUG */ | |
929 | # define b43dbg(wl, fmt...) do { /* nothing */ } while (0) | |
930 | #endif /* DEBUG */ | |
931 | ||
932 | /* A WARN_ON variant that vanishes when b43 debugging is disabled. | |
933 | * This _also_ evaluates the arg with debugging disabled. */ | |
934 | #if B43_DEBUG | |
935 | # define B43_WARN_ON(x) WARN_ON(x) | |
936 | #else | |
937 | static inline bool __b43_warn_on_dummy(bool x) { return x; } | |
938 | # define B43_WARN_ON(x) __b43_warn_on_dummy(unlikely(!!(x))) | |
939 | #endif | |
940 | ||
e4d6b795 MB |
941 | /* Convert an integer to a Q5.2 value */ |
942 | #define INT_TO_Q52(i) ((i) << 2) | |
943 | /* Convert a Q5.2 value to an integer (precision loss!) */ | |
944 | #define Q52_TO_INT(q52) ((q52) >> 2) | |
945 | /* Macros for printing a value in Q5.2 format */ | |
946 | #define Q52_FMT "%u.%u" | |
947 | #define Q52_ARG(q52) Q52_TO_INT(q52), ((((q52) & 0x3) * 100) / 4) | |
948 | ||
949 | #endif /* B43_H_ */ |