projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 95ea3627 | 1 | /* |
| 9c9a0d14 | 2 | Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> |
| 95ea3627 ID |
3 | <http://rt2x00.serialmonkey.com> |
| 4 | ||
| 5 | This program is free software; you can redistribute it and/or modify | |
| 6 | it under the terms of the GNU General Public License as published by | |
| 7 | the Free Software Foundation; either version 2 of the License, or | |
| 8 | (at your option) any later version. | |
| 9 | ||
| 10 | This program is distributed in the hope that it will be useful, | |
| 11 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 12 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 13 | GNU General Public License for more details. | |
| 14 | ||
| 15 | You should have received a copy of the GNU General Public License | |
| 16 | along with this program; if not, write to the | |
| 17 | Free Software Foundation, Inc., | |
| 18 | 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| 19 | */ | |
| 20 | ||
| 21 | /* | |
| 22 | Module: rt2500pci | |
| 23 | Abstract: Data structures and registers for the rt2500pci module. | |
| 24 | Supported chipsets: RT2560. | |
| 25 | */ | |
| 26 | ||
| 27 | #ifndef RT2500PCI_H | |
| 28 | #define RT2500PCI_H | |
| 29 | ||
| 30 | /* | |
| 31 | * RF chip defines. | |
| 32 | */ | |
| 33 | #define RF2522 0x0000 | |
| 34 | #define RF2523 0x0001 | |
| 35 | #define RF2524 0x0002 | |
| 36 | #define RF2525 0x0003 | |
| 37 | #define RF2525E 0x0004 | |
| 38 | #define RF5222 0x0010 | |
| 39 | ||
| 40 | /* | |
| 41 | * RT2560 version | |
| 42 | */ | |
| 43 | #define RT2560_VERSION_B 2 | |
| 44 | #define RT2560_VERSION_C 3 | |
| 45 | #define RT2560_VERSION_D 4 | |
| 46 | ||
| 47 | /* | |
| 48 | * Signal information. | |
| 49 | * Defaul offset is required for RSSI <-> dBm conversion. | |
| 50 | */ | |
| 95ea3627 ID |
51 | #define DEFAULT_RSSI_OFFSET 121 |
| 52 | ||
| 53 | /* | |
| 54 | * Register layout information. | |
| 55 | */ | |
| 56 | #define CSR_REG_BASE 0x0000 | |
| 57 | #define CSR_REG_SIZE 0x0174 | |
| 58 | #define EEPROM_BASE 0x0000 | |
| 59 | #define EEPROM_SIZE 0x0200 | |
| 743b97ca | 60 | #define BBP_BASE 0x0000 |
| 95ea3627 | 61 | #define BBP_SIZE 0x0040 |
| 53bc647a ID |
62 | #define RF_BASE 0x0004 |
| 63 | #define RF_SIZE 0x0010 | |
| 95ea3627 | 64 | |
| 61448f88 GW |
65 | /* |
| 66 | * Number of TX queues. | |
| 67 | */ | |
| 68 | #define NUM_TX_QUEUES 2 | |
| 69 | ||
| 95ea3627 ID |
70 | /* |
| 71 | * Control/Status Registers(CSR). | |
| 72 | * Some values are set in TU, whereas 1 TU == 1024 us. | |
| 73 | */ | |
| 74 | ||
| 75 | /* | |
| 76 | * CSR0: ASIC revision number. | |
| 77 | */ | |
| 78 | #define CSR0 0x0000 | |
| 49e721ec | 79 | #define CSR0_REVISION FIELD32(0x0000ffff) |
| 95ea3627 ID |
80 | |
| 81 | /* | |
| 82 | * CSR1: System control register. | |
| 83 | * SOFT_RESET: Software reset, 1: reset, 0: normal. | |
| 84 | * BBP_RESET: Hardware reset, 1: reset, 0, release. | |
| 85 | * HOST_READY: Host ready after initialization. | |
| 86 | */ | |
| 87 | #define CSR1 0x0004 | |
| 88 | #define CSR1_SOFT_RESET FIELD32(0x00000001) | |
| 89 | #define CSR1_BBP_RESET FIELD32(0x00000002) | |
| 90 | #define CSR1_HOST_READY FIELD32(0x00000004) | |
| 91 | ||
| 92 | /* | |
| 93 | * CSR2: System admin status register (invalid). | |
| 94 | */ | |
| 95 | #define CSR2 0x0008 | |
| 96 | ||
| 97 | /* | |
| 98 | * CSR3: STA MAC address register 0. | |
| 99 | */ | |
| 100 | #define CSR3 0x000c | |
| 101 | #define CSR3_BYTE0 FIELD32(0x000000ff) | |
| 102 | #define CSR3_BYTE1 FIELD32(0x0000ff00) | |
| 103 | #define CSR3_BYTE2 FIELD32(0x00ff0000) | |
| 104 | #define CSR3_BYTE3 FIELD32(0xff000000) | |
| 105 | ||
| 106 | /* | |
| 107 | * CSR4: STA MAC address register 1. | |
| 108 | */ | |
| 109 | #define CSR4 0x0010 | |
| 110 | #define CSR4_BYTE4 FIELD32(0x000000ff) | |
| 111 | #define CSR4_BYTE5 FIELD32(0x0000ff00) | |
| 112 | ||
| 113 | /* | |
| 114 | * CSR5: BSSID register 0. | |
| 115 | */ | |
| 116 | #define CSR5 0x0014 | |
| 117 | #define CSR5_BYTE0 FIELD32(0x000000ff) | |
| 118 | #define CSR5_BYTE1 FIELD32(0x0000ff00) | |
| 119 | #define CSR5_BYTE2 FIELD32(0x00ff0000) | |
| 120 | #define CSR5_BYTE3 FIELD32(0xff000000) | |
| 121 | ||
| 122 | /* | |
| 123 | * CSR6: BSSID register 1. | |
| 124 | */ | |
| 125 | #define CSR6 0x0018 | |
| 126 | #define CSR6_BYTE4 FIELD32(0x000000ff) | |
| 127 | #define CSR6_BYTE5 FIELD32(0x0000ff00) | |
| 128 | ||
| 129 | /* | |
| 130 | * CSR7: Interrupt source register. | |
| 131 | * Write 1 to clear. | |
| 132 | * TBCN_EXPIRE: Beacon timer expired interrupt. | |
| 133 | * TWAKE_EXPIRE: Wakeup timer expired interrupt. | |
| 134 | * TATIMW_EXPIRE: Timer of atim window expired interrupt. | |
| 135 | * TXDONE_TXRING: Tx ring transmit done interrupt. | |
| 136 | * TXDONE_ATIMRING: Atim ring transmit done interrupt. | |
| 137 | * TXDONE_PRIORING: Priority ring transmit done interrupt. | |
| 138 | * RXDONE: Receive done interrupt. | |
| 139 | * DECRYPTION_DONE: Decryption done interrupt. | |
| 140 | * ENCRYPTION_DONE: Encryption done interrupt. | |
| 141 | * UART1_TX_TRESHOLD: UART1 TX reaches threshold. | |
| 142 | * UART1_RX_TRESHOLD: UART1 RX reaches threshold. | |
| 143 | * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold. | |
| 144 | * UART1_TX_BUFF_ERROR: UART1 TX buffer error. | |
| 145 | * UART1_RX_BUFF_ERROR: UART1 RX buffer error. | |
| 146 | * UART2_TX_TRESHOLD: UART2 TX reaches threshold. | |
| 147 | * UART2_RX_TRESHOLD: UART2 RX reaches threshold. | |
| 148 | * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold. | |
| 149 | * UART2_TX_BUFF_ERROR: UART2 TX buffer error. | |
| 150 | * UART2_RX_BUFF_ERROR: UART2 RX buffer error. | |
| 151 | * TIMER_CSR3_EXPIRE: TIMECSR3 timer expired (802.1H quiet period). | |
| 152 | ||
| 153 | */ | |
| 154 | #define CSR7 0x001c | |
| 155 | #define CSR7_TBCN_EXPIRE FIELD32(0x00000001) | |
| 156 | #define CSR7_TWAKE_EXPIRE FIELD32(0x00000002) | |
| 157 | #define CSR7_TATIMW_EXPIRE FIELD32(0x00000004) | |
| 158 | #define CSR7_TXDONE_TXRING FIELD32(0x00000008) | |
| 159 | #define CSR7_TXDONE_ATIMRING FIELD32(0x00000010) | |
| 160 | #define CSR7_TXDONE_PRIORING FIELD32(0x00000020) | |
| 161 | #define CSR7_RXDONE FIELD32(0x00000040) | |
| 162 | #define CSR7_DECRYPTION_DONE FIELD32(0x00000080) | |
| 163 | #define CSR7_ENCRYPTION_DONE FIELD32(0x00000100) | |
| 164 | #define CSR7_UART1_TX_TRESHOLD FIELD32(0x00000200) | |
| 165 | #define CSR7_UART1_RX_TRESHOLD FIELD32(0x00000400) | |
| 166 | #define CSR7_UART1_IDLE_TRESHOLD FIELD32(0x00000800) | |
| 167 | #define CSR7_UART1_TX_BUFF_ERROR FIELD32(0x00001000) | |
| 168 | #define CSR7_UART1_RX_BUFF_ERROR FIELD32(0x00002000) | |
| 169 | #define CSR7_UART2_TX_TRESHOLD FIELD32(0x00004000) | |
| 170 | #define CSR7_UART2_RX_TRESHOLD FIELD32(0x00008000) | |
| 171 | #define CSR7_UART2_IDLE_TRESHOLD FIELD32(0x00010000) | |
| 172 | #define CSR7_UART2_TX_BUFF_ERROR FIELD32(0x00020000) | |
| 173 | #define CSR7_UART2_RX_BUFF_ERROR FIELD32(0x00040000) | |
| 174 | #define CSR7_TIMER_CSR3_EXPIRE FIELD32(0x00080000) | |
| 175 | ||
| 176 | /* | |
| 177 | * CSR8: Interrupt mask register. | |
| 178 | * Write 1 to mask interrupt. | |
| 179 | * TBCN_EXPIRE: Beacon timer expired interrupt. | |
| 180 | * TWAKE_EXPIRE: Wakeup timer expired interrupt. | |
| 181 | * TATIMW_EXPIRE: Timer of atim window expired interrupt. | |
| 182 | * TXDONE_TXRING: Tx ring transmit done interrupt. | |
| 183 | * TXDONE_ATIMRING: Atim ring transmit done interrupt. | |
| 184 | * TXDONE_PRIORING: Priority ring transmit done interrupt. | |
| 185 | * RXDONE: Receive done interrupt. | |
| 186 | * DECRYPTION_DONE: Decryption done interrupt. | |
| 187 | * ENCRYPTION_DONE: Encryption done interrupt. | |
| 188 | * UART1_TX_TRESHOLD: UART1 TX reaches threshold. | |
| 189 | * UART1_RX_TRESHOLD: UART1 RX reaches threshold. | |
| 190 | * UART1_IDLE_TRESHOLD: UART1 IDLE over threshold. | |
| 191 | * UART1_TX_BUFF_ERROR: UART1 TX buffer error. | |
| 192 | * UART1_RX_BUFF_ERROR: UART1 RX buffer error. | |
| 193 | * UART2_TX_TRESHOLD: UART2 TX reaches threshold. | |
| 194 | * UART2_RX_TRESHOLD: UART2 RX reaches threshold. | |
| 195 | * UART2_IDLE_TRESHOLD: UART2 IDLE over threshold. | |
| 196 | * UART2_TX_BUFF_ERROR: UART2 TX buffer error. | |
| 197 | * UART2_RX_BUFF_ERROR: UART2 RX buffer error. | |
| 198 | * TIMER_CSR3_EXPIRE: TIMECSR3 timer expired (802.1H quiet period). | |
| 199 | */ | |
| 200 | #define CSR8 0x0020 | |
| 201 | #define CSR8_TBCN_EXPIRE FIELD32(0x00000001) | |
| 202 | #define CSR8_TWAKE_EXPIRE FIELD32(0x00000002) | |
| 203 | #define CSR8_TATIMW_EXPIRE FIELD32(0x00000004) | |
| 204 | #define CSR8_TXDONE_TXRING FIELD32(0x00000008) | |
| 205 | #define CSR8_TXDONE_ATIMRING FIELD32(0x00000010) | |
| 206 | #define CSR8_TXDONE_PRIORING FIELD32(0x00000020) | |
| 207 | #define CSR8_RXDONE FIELD32(0x00000040) | |
| 208 | #define CSR8_DECRYPTION_DONE FIELD32(0x00000080) | |
| 209 | #define CSR8_ENCRYPTION_DONE FIELD32(0x00000100) | |
| 210 | #define CSR8_UART1_TX_TRESHOLD FIELD32(0x00000200) | |
| 211 | #define CSR8_UART1_RX_TRESHOLD FIELD32(0x00000400) | |
| 212 | #define CSR8_UART1_IDLE_TRESHOLD FIELD32(0x00000800) | |
| 213 | #define CSR8_UART1_TX_BUFF_ERROR FIELD32(0x00001000) | |
| 214 | #define CSR8_UART1_RX_BUFF_ERROR FIELD32(0x00002000) | |
| 215 | #define CSR8_UART2_TX_TRESHOLD FIELD32(0x00004000) | |
| 216 | #define CSR8_UART2_RX_TRESHOLD FIELD32(0x00008000) | |
| 217 | #define CSR8_UART2_IDLE_TRESHOLD FIELD32(0x00010000) | |
| 218 | #define CSR8_UART2_TX_BUFF_ERROR FIELD32(0x00020000) | |
| 219 | #define CSR8_UART2_RX_BUFF_ERROR FIELD32(0x00040000) | |
| 220 | #define CSR8_TIMER_CSR3_EXPIRE FIELD32(0x00080000) | |
| 221 | ||
| 222 | /* | |
| 223 | * CSR9: Maximum frame length register. | |
| 224 | * MAX_FRAME_UNIT: Maximum frame length in 128b unit, default: 12. | |
| 225 | */ | |
| 226 | #define CSR9 0x0024 | |
| 227 | #define CSR9_MAX_FRAME_UNIT FIELD32(0x00000f80) | |
| 228 | ||
| 229 | /* | |
| 230 | * SECCSR0: WEP control register. | |
| 231 | * KICK_DECRYPT: Kick decryption engine, self-clear. | |
| 232 | * ONE_SHOT: 0: ring mode, 1: One shot only mode. | |
| 233 | * DESC_ADDRESS: Descriptor physical address of frame. | |
| 234 | */ | |
| 235 | #define SECCSR0 0x0028 | |
| 236 | #define SECCSR0_KICK_DECRYPT FIELD32(0x00000001) | |
| 237 | #define SECCSR0_ONE_SHOT FIELD32(0x00000002) | |
| 238 | #define SECCSR0_DESC_ADDRESS FIELD32(0xfffffffc) | |
| 239 | ||
| 240 | /* | |
| 241 | * CSR11: Back-off control register. | |
| 242 | * CWMIN: CWmin. Default cwmin is 31 (2^5 - 1). | |
| 243 | * CWMAX: CWmax. Default cwmax is 1023 (2^10 - 1). | |
| 244 | * SLOT_TIME: Slot time, default is 20us for 802.11b | |
| 245 | * CW_SELECT: CWmin/CWmax selection, 1: Register, 0: TXD. | |
| 246 | * LONG_RETRY: Long retry count. | |
| 247 | * SHORT_RETRY: Short retry count. | |
| 248 | */ | |
| 249 | #define CSR11 0x002c | |
| 250 | #define CSR11_CWMIN FIELD32(0x0000000f) | |
| 251 | #define CSR11_CWMAX FIELD32(0x000000f0) | |
| 252 | #define CSR11_SLOT_TIME FIELD32(0x00001f00) | |
| 253 | #define CSR11_CW_SELECT FIELD32(0x00002000) | |
| 254 | #define CSR11_LONG_RETRY FIELD32(0x00ff0000) | |
| 255 | #define CSR11_SHORT_RETRY FIELD32(0xff000000) | |
| 256 | ||
| 257 | /* | |
| 258 | * CSR12: Synchronization configuration register 0. | |
| 259 | * All units in 1/16 TU. | |
| 260 | * BEACON_INTERVAL: Beacon interval, default is 100 TU. | |
| 261 | * CFP_MAX_DURATION: Cfp maximum duration, default is 100 TU. | |
| 262 | */ | |
| 263 | #define CSR12 0x0030 | |
| 264 | #define CSR12_BEACON_INTERVAL FIELD32(0x0000ffff) | |
| 265 | #define CSR12_CFP_MAX_DURATION FIELD32(0xffff0000) | |
| 266 | ||
| 267 | /* | |
| 268 | * CSR13: Synchronization configuration register 1. | |
| 269 | * All units in 1/16 TU. | |
| 270 | * ATIMW_DURATION: Atim window duration. | |
| 271 | * CFP_PERIOD: Cfp period, default is 0 TU. | |
| 272 | */ | |
| 273 | #define CSR13 0x0034 | |
| 274 | #define CSR13_ATIMW_DURATION FIELD32(0x0000ffff) | |
| 275 | #define CSR13_CFP_PERIOD FIELD32(0x00ff0000) | |
| 276 | ||
| 277 | /* | |
| 278 | * CSR14: Synchronization control register. | |
| 279 | * TSF_COUNT: Enable tsf auto counting. | |
| 280 | * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode. | |
| 281 | * TBCN: Enable tbcn with reload value. | |
| 282 | * TCFP: Enable tcfp & cfp / cp switching. | |
| 283 | * TATIMW: Enable tatimw & atim window switching. | |
| 284 | * BEACON_GEN: Enable beacon generator. | |
| 285 | * CFP_COUNT_PRELOAD: Cfp count preload value. | |
| 286 | * TBCM_PRELOAD: Tbcn preload value in units of 64us. | |
| 287 | */ | |
| 288 | #define CSR14 0x0038 | |
| 289 | #define CSR14_TSF_COUNT FIELD32(0x00000001) | |
| 290 | #define CSR14_TSF_SYNC FIELD32(0x00000006) | |
| 291 | #define CSR14_TBCN FIELD32(0x00000008) | |
| 292 | #define CSR14_TCFP FIELD32(0x00000010) | |
| 293 | #define CSR14_TATIMW FIELD32(0x00000020) | |
| 294 | #define CSR14_BEACON_GEN FIELD32(0x00000040) | |
| 295 | #define CSR14_CFP_COUNT_PRELOAD FIELD32(0x0000ff00) | |
| 296 | #define CSR14_TBCM_PRELOAD FIELD32(0xffff0000) | |
| 297 | ||
| 298 | /* | |
| 299 | * CSR15: Synchronization status register. | |
| 300 | * CFP: ASIC is in contention-free period. | |
| 301 | * ATIMW: ASIC is in ATIM window. | |
| 302 | * BEACON_SENT: Beacon is send. | |
| 303 | */ | |
| 304 | #define CSR15 0x003c | |
| 305 | #define CSR15_CFP FIELD32(0x00000001) | |
| 306 | #define CSR15_ATIMW FIELD32(0x00000002) | |
| 307 | #define CSR15_BEACON_SENT FIELD32(0x00000004) | |
| 308 | ||
| 309 | /* | |
| 310 | * CSR16: TSF timer register 0. | |
| 311 | */ | |
| 312 | #define CSR16 0x0040 | |
| 313 | #define CSR16_LOW_TSFTIMER FIELD32(0xffffffff) | |
| 314 | ||
| 315 | /* | |
| 316 | * CSR17: TSF timer register 1. | |
| 317 | */ | |
| 318 | #define CSR17 0x0044 | |
| 319 | #define CSR17_HIGH_TSFTIMER FIELD32(0xffffffff) | |
| 320 | ||
| 321 | /* | |
| 322 | * CSR18: IFS timer register 0. | |
| 323 | * SIFS: Sifs, default is 10 us. | |
| 324 | * PIFS: Pifs, default is 30 us. | |
| 325 | */ | |
| 326 | #define CSR18 0x0048 | |
| 327 | #define CSR18_SIFS FIELD32(0x000001ff) | |
| 328 | #define CSR18_PIFS FIELD32(0x001f0000) | |
| 329 | ||
| 330 | /* | |
| 331 | * CSR19: IFS timer register 1. | |
| 332 | * DIFS: Difs, default is 50 us. | |
| 333 | * EIFS: Eifs, default is 364 us. | |
| 334 | */ | |
| 335 | #define CSR19 0x004c | |
| 336 | #define CSR19_DIFS FIELD32(0x0000ffff) | |
| 337 | #define CSR19_EIFS FIELD32(0xffff0000) | |
| 338 | ||
| 339 | /* | |
| 340 | * CSR20: Wakeup timer register. | |
| 341 | * DELAY_AFTER_TBCN: Delay after tbcn expired in units of 1/16 TU. | |
| 342 | * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup. | |
| 343 | * AUTOWAKE: Enable auto wakeup / sleep mechanism. | |
| 344 | */ | |
| 345 | #define CSR20 0x0050 | |
| 346 | #define CSR20_DELAY_AFTER_TBCN FIELD32(0x0000ffff) | |
| 347 | #define CSR20_TBCN_BEFORE_WAKEUP FIELD32(0x00ff0000) | |
| 348 | #define CSR20_AUTOWAKE FIELD32(0x01000000) | |
| 349 | ||
| 350 | /* | |
| 351 | * CSR21: EEPROM control register. | |
| 352 | * RELOAD: Write 1 to reload eeprom content. | |
| 353 | * TYPE_93C46: 1: 93c46, 0:93c66. | |
| 354 | */ | |
| 355 | #define CSR21 0x0054 | |
| 356 | #define CSR21_RELOAD FIELD32(0x00000001) | |
| 357 | #define CSR21_EEPROM_DATA_CLOCK FIELD32(0x00000002) | |
| 358 | #define CSR21_EEPROM_CHIP_SELECT FIELD32(0x00000004) | |
| 359 | #define CSR21_EEPROM_DATA_IN FIELD32(0x00000008) | |
| 360 | #define CSR21_EEPROM_DATA_OUT FIELD32(0x00000010) | |
| 361 | #define CSR21_TYPE_93C46 FIELD32(0x00000020) | |
| 362 | ||
| 363 | /* | |
| 364 | * CSR22: CFP control register. | |
| 365 | * CFP_DURATION_REMAIN: Cfp duration remain, in units of TU. | |
| 366 | * RELOAD_CFP_DURATION: Write 1 to reload cfp duration remain. | |
| 367 | */ | |
| 368 | #define CSR22 0x0058 | |
| 369 | #define CSR22_CFP_DURATION_REMAIN FIELD32(0x0000ffff) | |
| 370 | #define CSR22_RELOAD_CFP_DURATION FIELD32(0x00010000) | |
| 371 | ||
| 372 | /* | |
| 373 | * Transmit related CSRs. | |
| 374 | * Some values are set in TU, whereas 1 TU == 1024 us. | |
| 375 | */ | |
| 376 | ||
| 377 | /* | |
| 378 | * TXCSR0: TX Control Register. | |
| 379 | * KICK_TX: Kick tx ring. | |
| 380 | * KICK_ATIM: Kick atim ring. | |
| 381 | * KICK_PRIO: Kick priority ring. | |
| 382 | * ABORT: Abort all transmit related ring operation. | |
| 383 | */ | |
| 384 | #define TXCSR0 0x0060 | |
| 385 | #define TXCSR0_KICK_TX FIELD32(0x00000001) | |
| 386 | #define TXCSR0_KICK_ATIM FIELD32(0x00000002) | |
| 387 | #define TXCSR0_KICK_PRIO FIELD32(0x00000004) | |
| 388 | #define TXCSR0_ABORT FIELD32(0x00000008) | |
| 389 | ||
| 390 | /* | |
| 391 | * TXCSR1: TX Configuration Register. | |
| 392 | * ACK_TIMEOUT: Ack timeout, default = sifs + 2*slottime + acktime @ 1mbps. | |
| 393 | * ACK_CONSUME_TIME: Ack consume time, default = sifs + acktime @ 1mbps. | |
| 394 | * TSF_OFFSET: Insert tsf offset. | |
| 395 | * AUTORESPONDER: Enable auto responder which include ack & cts. | |
| 396 | */ | |
| 397 | #define TXCSR1 0x0064 | |
| 398 | #define TXCSR1_ACK_TIMEOUT FIELD32(0x000001ff) | |
| 399 | #define TXCSR1_ACK_CONSUME_TIME FIELD32(0x0003fe00) | |
| 400 | #define TXCSR1_TSF_OFFSET FIELD32(0x00fc0000) | |
| 401 | #define TXCSR1_AUTORESPONDER FIELD32(0x01000000) | |
| 402 | ||
| 403 | /* | |
| 404 | * TXCSR2: Tx descriptor configuration register. | |
| 405 | * TXD_SIZE: Tx descriptor size, default is 48. | |
| 406 | * NUM_TXD: Number of tx entries in ring. | |
| 407 | * NUM_ATIM: Number of atim entries in ring. | |
| 408 | * NUM_PRIO: Number of priority entries in ring. | |
| 409 | */ | |
| 410 | #define TXCSR2 0x0068 | |
| 411 | #define TXCSR2_TXD_SIZE FIELD32(0x000000ff) | |
| 412 | #define TXCSR2_NUM_TXD FIELD32(0x0000ff00) | |
| 413 | #define TXCSR2_NUM_ATIM FIELD32(0x00ff0000) | |
| 414 | #define TXCSR2_NUM_PRIO FIELD32(0xff000000) | |
| 415 | ||
| 416 | /* | |
| 417 | * TXCSR3: TX Ring Base address register. | |
| 418 | */ | |
| 419 | #define TXCSR3 0x006c | |
| 420 | #define TXCSR3_TX_RING_REGISTER FIELD32(0xffffffff) | |
| 421 | ||
| 422 | /* | |
| 423 | * TXCSR4: TX Atim Ring Base address register. | |
| 424 | */ | |
| 425 | #define TXCSR4 0x0070 | |
| 426 | #define TXCSR4_ATIM_RING_REGISTER FIELD32(0xffffffff) | |
| 427 | ||
| 428 | /* | |
| 429 | * TXCSR5: TX Prio Ring Base address register. | |
| 430 | */ | |
| 431 | #define TXCSR5 0x0074 | |
| 432 | #define TXCSR5_PRIO_RING_REGISTER FIELD32(0xffffffff) | |
| 433 | ||
| 434 | /* | |
| 435 | * TXCSR6: Beacon Base address register. | |
| 436 | */ | |
| 437 | #define TXCSR6 0x0078 | |
| 438 | #define TXCSR6_BEACON_RING_REGISTER FIELD32(0xffffffff) | |
| 439 | ||
| 440 | /* | |
| 441 | * TXCSR7: Auto responder control register. | |
| 442 | * AR_POWERMANAGEMENT: Auto responder power management bit. | |
| 443 | */ | |
| 444 | #define TXCSR7 0x007c | |
| 445 | #define TXCSR7_AR_POWERMANAGEMENT FIELD32(0x00000001) | |
| 446 | ||
| 447 | /* | |
| 448 | * TXCSR8: CCK Tx BBP register. | |
| 449 | */ | |
| 450 | #define TXCSR8 0x0098 | |
| 451 | #define TXCSR8_BBP_ID0 FIELD32(0x0000007f) | |
| 452 | #define TXCSR8_BBP_ID0_VALID FIELD32(0x00000080) | |
| 453 | #define TXCSR8_BBP_ID1 FIELD32(0x00007f00) | |
| 454 | #define TXCSR8_BBP_ID1_VALID FIELD32(0x00008000) | |
| 455 | #define TXCSR8_BBP_ID2 FIELD32(0x007f0000) | |
| 456 | #define TXCSR8_BBP_ID2_VALID FIELD32(0x00800000) | |
| 457 | #define TXCSR8_BBP_ID3 FIELD32(0x7f000000) | |
| 458 | #define TXCSR8_BBP_ID3_VALID FIELD32(0x80000000) | |
| 459 | ||
| 460 | /* | |
| 461 | * TXCSR9: OFDM TX BBP registers | |
| 462 | * OFDM_SIGNAL: BBP rate field address for OFDM. | |
| 463 | * OFDM_SERVICE: BBP service field address for OFDM. | |
| 464 | * OFDM_LENGTH_LOW: BBP length low byte address for OFDM. | |
| 465 | * OFDM_LENGTH_HIGH: BBP length high byte address for OFDM. | |
| 466 | */ | |
| 467 | #define TXCSR9 0x0094 | |
| 468 | #define TXCSR9_OFDM_RATE FIELD32(0x000000ff) | |
| 469 | #define TXCSR9_OFDM_SERVICE FIELD32(0x0000ff00) | |
| 470 | #define TXCSR9_OFDM_LENGTH_LOW FIELD32(0x00ff0000) | |
| 471 | #define TXCSR9_OFDM_LENGTH_HIGH FIELD32(0xff000000) | |
| 472 | ||
| 473 | /* | |
| 474 | * Receive related CSRs. | |
| 475 | * Some values are set in TU, whereas 1 TU == 1024 us. | |
| 476 | */ | |
| 477 | ||
| 478 | /* | |
| 479 | * RXCSR0: RX Control Register. | |
| 480 | * DISABLE_RX: Disable rx engine. | |
| 481 | * DROP_CRC: Drop crc error. | |
| 482 | * DROP_PHYSICAL: Drop physical error. | |
| 483 | * DROP_CONTROL: Drop control frame. | |
| 484 | * DROP_NOT_TO_ME: Drop not to me unicast frame. | |
| 485 | * DROP_TODS: Drop frame tods bit is true. | |
| 486 | * DROP_VERSION_ERROR: Drop version error frame. | |
| 487 | * PASS_CRC: Pass all packets with crc attached. | |
| 488 | * PASS_CRC: Pass all packets with crc attached. | |
| 489 | * PASS_PLCP: Pass all packets with 4 bytes PLCP attached. | |
| 490 | * DROP_MCAST: Drop multicast frames. | |
| 491 | * DROP_BCAST: Drop broadcast frames. | |
| 492 | * ENABLE_QOS: Accept QOS data frame and parse QOS field. | |
| 493 | */ | |
| 494 | #define RXCSR0 0x0080 | |
| 495 | #define RXCSR0_DISABLE_RX FIELD32(0x00000001) | |
| 496 | #define RXCSR0_DROP_CRC FIELD32(0x00000002) | |
| 497 | #define RXCSR0_DROP_PHYSICAL FIELD32(0x00000004) | |
| 498 | #define RXCSR0_DROP_CONTROL FIELD32(0x00000008) | |
| 499 | #define RXCSR0_DROP_NOT_TO_ME FIELD32(0x00000010) | |
| 500 | #define RXCSR0_DROP_TODS FIELD32(0x00000020) | |
| 501 | #define RXCSR0_DROP_VERSION_ERROR FIELD32(0x00000040) | |
| 502 | #define RXCSR0_PASS_CRC FIELD32(0x00000080) | |
| 503 | #define RXCSR0_PASS_PLCP FIELD32(0x00000100) | |
| 504 | #define RXCSR0_DROP_MCAST FIELD32(0x00000200) | |
| 505 | #define RXCSR0_DROP_BCAST FIELD32(0x00000400) | |
| 506 | #define RXCSR0_ENABLE_QOS FIELD32(0x00000800) | |
| 507 | ||
| 508 | /* | |
| 509 | * RXCSR1: RX descriptor configuration register. | |
| 510 | * RXD_SIZE: Rx descriptor size, default is 32b. | |
| 511 | * NUM_RXD: Number of rx entries in ring. | |
| 512 | */ | |
| 513 | #define RXCSR1 0x0084 | |
| 514 | #define RXCSR1_RXD_SIZE FIELD32(0x000000ff) | |
| 515 | #define RXCSR1_NUM_RXD FIELD32(0x0000ff00) | |
| 516 | ||
| 517 | /* | |
| 518 | * RXCSR2: RX Ring base address register. | |
| 519 | */ | |
| 520 | #define RXCSR2 0x0088 | |
| 521 | #define RXCSR2_RX_RING_REGISTER FIELD32(0xffffffff) | |
| 522 | ||
| 523 | /* | |
| 524 | * RXCSR3: BBP ID register for Rx operation. | |
| 525 | * BBP_ID#: BBP register # id. | |
| 526 | * BBP_ID#_VALID: BBP register # id is valid or not. | |
| 527 | */ | |
| 528 | #define RXCSR3 0x0090 | |
| 529 | #define RXCSR3_BBP_ID0 FIELD32(0x0000007f) | |
| 530 | #define RXCSR3_BBP_ID0_VALID FIELD32(0x00000080) | |
| 531 | #define RXCSR3_BBP_ID1 FIELD32(0x00007f00) | |
| 532 | #define RXCSR3_BBP_ID1_VALID FIELD32(0x00008000) | |
| 533 | #define RXCSR3_BBP_ID2 FIELD32(0x007f0000) | |
| 534 | #define RXCSR3_BBP_ID2_VALID FIELD32(0x00800000) | |
| 535 | #define RXCSR3_BBP_ID3 FIELD32(0x7f000000) | |
| 536 | #define RXCSR3_BBP_ID3_VALID FIELD32(0x80000000) | |
| 537 | ||
| 538 | /* | |
| 539 | * ARCSR1: Auto Responder PLCP config register 1. | |
| 540 | * AR_BBP_DATA#: Auto responder BBP register # data. | |
| 541 | * AR_BBP_ID#: Auto responder BBP register # Id. | |
| 542 | */ | |
| 543 | #define ARCSR1 0x009c | |
| 544 | #define ARCSR1_AR_BBP_DATA2 FIELD32(0x000000ff) | |
| 545 | #define ARCSR1_AR_BBP_ID2 FIELD32(0x0000ff00) | |
| 546 | #define ARCSR1_AR_BBP_DATA3 FIELD32(0x00ff0000) | |
| 547 | #define ARCSR1_AR_BBP_ID3 FIELD32(0xff000000) | |
| 548 | ||
| 549 | /* | |
| 550 | * Miscellaneous Registers. | |
| 551 | * Some values are set in TU, whereas 1 TU == 1024 us. | |
| 552 | ||
| 553 | */ | |
| 554 | ||
| 555 | /* | |
| 556 | * PCICSR: PCI control register. | |
| 557 | * BIG_ENDIAN: 1: big endian, 0: little endian. | |
| 558 | * RX_TRESHOLD: Rx threshold in dw to start pci access | |
| 559 | * 0: 16dw (default), 1: 8dw, 2: 4dw, 3: 32dw. | |
| 560 | * TX_TRESHOLD: Tx threshold in dw to start pci access | |
| 561 | * 0: 0dw (default), 1: 1dw, 2: 4dw, 3: forward. | |
| 562 | * BURST_LENTH: Pci burst length 0: 4dw (default, 1: 8dw, 2: 16dw, 3:32dw. | |
| 563 | * ENABLE_CLK: Enable clk_run, pci clock can't going down to non-operational. | |
| 564 | * READ_MULTIPLE: Enable memory read multiple. | |
| 565 | * WRITE_INVALID: Enable memory write & invalid. | |
| 566 | */ | |
| 567 | #define PCICSR 0x008c | |
| 568 | #define PCICSR_BIG_ENDIAN FIELD32(0x00000001) | |
| 569 | #define PCICSR_RX_TRESHOLD FIELD32(0x00000006) | |
| 570 | #define PCICSR_TX_TRESHOLD FIELD32(0x00000018) | |
| 571 | #define PCICSR_BURST_LENTH FIELD32(0x00000060) | |
| 572 | #define PCICSR_ENABLE_CLK FIELD32(0x00000080) | |
| 573 | #define PCICSR_READ_MULTIPLE FIELD32(0x00000100) | |
| 574 | #define PCICSR_WRITE_INVALID FIELD32(0x00000200) | |
| 575 | ||
| 576 | /* | |
| 577 | * CNT0: FCS error count. | |
| 578 | * FCS_ERROR: FCS error count, cleared when read. | |
| 579 | */ | |
| 580 | #define CNT0 0x00a0 | |
| 581 | #define CNT0_FCS_ERROR FIELD32(0x0000ffff) | |
| 582 | ||
| 583 | /* | |
| 584 | * Statistic Register. | |
| 585 | * CNT1: PLCP error count. | |
| 586 | * CNT2: Long error count. | |
| 587 | */ | |
| 588 | #define TIMECSR2 0x00a8 | |
| 589 | #define CNT1 0x00ac | |
| 590 | #define CNT2 0x00b0 | |
| 591 | #define TIMECSR3 0x00b4 | |
| 592 | ||
| 593 | /* | |
| 594 | * CNT3: CCA false alarm count. | |
| 595 | */ | |
| 596 | #define CNT3 0x00b8 | |
| 597 | #define CNT3_FALSE_CCA FIELD32(0x0000ffff) | |
| 598 | ||
| 599 | /* | |
| 600 | * Statistic Register. | |
| 601 | * CNT4: Rx FIFO overflow count. | |
| 602 | * CNT5: Tx FIFO underrun count. | |
| 603 | */ | |
| 604 | #define CNT4 0x00bc | |
| 605 | #define CNT5 0x00c0 | |
| 606 | ||
| 607 | /* | |
| 608 | * Baseband Control Register. | |
| 609 | */ | |
| 610 | ||
| 611 | /* | |
| 612 | * PWRCSR0: Power mode configuration register. | |
| 613 | */ | |
| 614 | #define PWRCSR0 0x00c4 | |
| 615 | ||
| 616 | /* | |
| 617 | * Power state transition time registers. | |
| 618 | */ | |
| 619 | #define PSCSR0 0x00c8 | |
| 620 | #define PSCSR1 0x00cc | |
| 621 | #define PSCSR2 0x00d0 | |
| 622 | #define PSCSR3 0x00d4 | |
| 623 | ||
| 624 | /* | |
| 625 | * PWRCSR1: Manual power control / status register. | |
| 626 | * Allowed state: 0 deep_sleep, 1: sleep, 2: standby, 3: awake. | |
| 627 | * SET_STATE: Set state. Write 1 to trigger, self cleared. | |
| 628 | * BBP_DESIRE_STATE: BBP desired state. | |
| 629 | * RF_DESIRE_STATE: RF desired state. | |
| 630 | * BBP_CURR_STATE: BBP current state. | |
| 631 | * RF_CURR_STATE: RF current state. | |
| 632 | * PUT_TO_SLEEP: Put to sleep. Write 1 to trigger, self cleared. | |
| 633 | */ | |
| 634 | #define PWRCSR1 0x00d8 | |
| 635 | #define PWRCSR1_SET_STATE FIELD32(0x00000001) | |
| 636 | #define PWRCSR1_BBP_DESIRE_STATE FIELD32(0x00000006) | |
| 637 | #define PWRCSR1_RF_DESIRE_STATE FIELD32(0x00000018) | |
| 638 | #define PWRCSR1_BBP_CURR_STATE FIELD32(0x00000060) | |
| 639 | #define PWRCSR1_RF_CURR_STATE FIELD32(0x00000180) | |
| 640 | #define PWRCSR1_PUT_TO_SLEEP FIELD32(0x00000200) | |
| 641 | ||
| 642 | /* | |
| 643 | * TIMECSR: Timer control register. | |
| 644 | * US_COUNT: 1 us timer count in units of clock cycles. | |
| 645 | * US_64_COUNT: 64 us timer count in units of 1 us timer. | |
| 646 | * BEACON_EXPECT: Beacon expect window. | |
| 647 | */ | |
| 648 | #define TIMECSR 0x00dc | |
| 649 | #define TIMECSR_US_COUNT FIELD32(0x000000ff) | |
| 650 | #define TIMECSR_US_64_COUNT FIELD32(0x0000ff00) | |
| 651 | #define TIMECSR_BEACON_EXPECT FIELD32(0x00070000) | |
| 652 | ||
| 653 | /* | |
| 654 | * MACCSR0: MAC configuration register 0. | |
| 655 | */ | |
| 656 | #define MACCSR0 0x00e0 | |
| 657 | ||
| 658 | /* | |
| 659 | * MACCSR1: MAC configuration register 1. | |
| 660 | * KICK_RX: Kick one-shot rx in one-shot rx mode. | |
| 661 | * ONESHOT_RXMODE: Enable one-shot rx mode for debugging. | |
| 662 | * BBPRX_RESET_MODE: Ralink bbp rx reset mode. | |
| 663 | * AUTO_TXBBP: Auto tx logic access bbp control register. | |
| 664 | * AUTO_RXBBP: Auto rx logic access bbp control register. | |
| 665 | * LOOPBACK: Loopback mode. 0: normal, 1: internal, 2: external, 3:rsvd. | |
| 666 | * INTERSIL_IF: Intersil if calibration pin. | |
| 667 | */ | |
| 668 | #define MACCSR1 0x00e4 | |
| 669 | #define MACCSR1_KICK_RX FIELD32(0x00000001) | |
| 670 | #define MACCSR1_ONESHOT_RXMODE FIELD32(0x00000002) | |
| 671 | #define MACCSR1_BBPRX_RESET_MODE FIELD32(0x00000004) | |
| 672 | #define MACCSR1_AUTO_TXBBP FIELD32(0x00000008) | |
| 673 | #define MACCSR1_AUTO_RXBBP FIELD32(0x00000010) | |
| 674 | #define MACCSR1_LOOPBACK FIELD32(0x00000060) | |
| 675 | #define MACCSR1_INTERSIL_IF FIELD32(0x00000080) | |
| 676 | ||
| 677 | /* | |
| 678 | * RALINKCSR: Ralink Rx auto-reset BBCR. | |
| 679 | * AR_BBP_DATA#: Auto reset BBP register # data. | |
| 680 | * AR_BBP_ID#: Auto reset BBP register # id. | |
| 681 | */ | |
| 682 | #define RALINKCSR 0x00e8 | |
| 683 | #define RALINKCSR_AR_BBP_DATA0 FIELD32(0x000000ff) | |
| 684 | #define RALINKCSR_AR_BBP_ID0 FIELD32(0x00007f00) | |
| 685 | #define RALINKCSR_AR_BBP_VALID0 FIELD32(0x00008000) | |
| 686 | #define RALINKCSR_AR_BBP_DATA1 FIELD32(0x00ff0000) | |
| 687 | #define RALINKCSR_AR_BBP_ID1 FIELD32(0x7f000000) | |
| 688 | #define RALINKCSR_AR_BBP_VALID1 FIELD32(0x80000000) | |
| 689 | ||
| 690 | /* | |
| 691 | * BCNCSR: Beacon interval control register. | |
| 692 | * CHANGE: Write one to change beacon interval. | |
| 693 | * DELTATIME: The delta time value. | |
| 694 | * NUM_BEACON: Number of beacon according to mode. | |
| 695 | * MODE: Please refer to asic specs. | |
| 696 | * PLUS: Plus or minus delta time value. | |
| 697 | */ | |
| 698 | #define BCNCSR 0x00ec | |
| 699 | #define BCNCSR_CHANGE FIELD32(0x00000001) | |
| 700 | #define BCNCSR_DELTATIME FIELD32(0x0000001e) | |
| 701 | #define BCNCSR_NUM_BEACON FIELD32(0x00001fe0) | |
| 702 | #define BCNCSR_MODE FIELD32(0x00006000) | |
| 703 | #define BCNCSR_PLUS FIELD32(0x00008000) | |
| 704 | ||
| 705 | /* | |
| 706 | * BBP / RF / IF Control Register. | |
| 707 | */ | |
| 708 | ||
| 709 | /* | |
| 710 | * BBPCSR: BBP serial control register. | |
| 711 | * VALUE: Register value to program into BBP. | |
| 712 | * REGNUM: Selected BBP register. | |
| 713 | * BUSY: 1: asic is busy execute BBP programming. | |
| 714 | * WRITE_CONTROL: 1: write BBP, 0: read BBP. | |
| 715 | */ | |
| 716 | #define BBPCSR 0x00f0 | |
| 717 | #define BBPCSR_VALUE FIELD32(0x000000ff) | |
| 718 | #define BBPCSR_REGNUM FIELD32(0x00007f00) | |
| 719 | #define BBPCSR_BUSY FIELD32(0x00008000) | |
| 720 | #define BBPCSR_WRITE_CONTROL FIELD32(0x00010000) | |
| 721 | ||
| 722 | /* | |
| 723 | * RFCSR: RF serial control register. | |
| 724 | * VALUE: Register value + id to program into rf/if. | |
| 725 | * NUMBER_OF_BITS: Number of bits used in value (i:20, rfmd:22). | |
| 726 | * IF_SELECT: Chip to program: 0: rf, 1: if. | |
| 727 | * PLL_LD: Rf pll_ld status. | |
| 728 | * BUSY: 1: asic is busy execute rf programming. | |
| 729 | */ | |
| 730 | #define RFCSR 0x00f4 | |
| 731 | #define RFCSR_VALUE FIELD32(0x00ffffff) | |
| 732 | #define RFCSR_NUMBER_OF_BITS FIELD32(0x1f000000) | |
| 733 | #define RFCSR_IF_SELECT FIELD32(0x20000000) | |
| 734 | #define RFCSR_PLL_LD FIELD32(0x40000000) | |
| 735 | #define RFCSR_BUSY FIELD32(0x80000000) | |
| 736 | ||
| 737 | /* | |
| 738 | * LEDCSR: LED control register. | |
| 739 | * ON_PERIOD: On period, default 70ms. | |
| 740 | * OFF_PERIOD: Off period, default 30ms. | |
| 741 | * LINK: 0: linkoff, 1: linkup. | |
| 742 | * ACTIVITY: 0: idle, 1: active. | |
| 743 | * LINK_POLARITY: 0: active low, 1: active high. | |
| 744 | * ACTIVITY_POLARITY: 0: active low, 1: active high. | |
| 745 | * LED_DEFAULT: LED state for "enable" 0: ON, 1: OFF. | |
| 746 | */ | |
| 747 | #define LEDCSR 0x00f8 | |
| 748 | #define LEDCSR_ON_PERIOD FIELD32(0x000000ff) | |
| 749 | #define LEDCSR_OFF_PERIOD FIELD32(0x0000ff00) | |
| 750 | #define LEDCSR_LINK FIELD32(0x00010000) | |
| 751 | #define LEDCSR_ACTIVITY FIELD32(0x00020000) | |
| 752 | #define LEDCSR_LINK_POLARITY FIELD32(0x00040000) | |
| 753 | #define LEDCSR_ACTIVITY_POLARITY FIELD32(0x00080000) | |
| 754 | #define LEDCSR_LED_DEFAULT FIELD32(0x00100000) | |
| 755 | ||
| 756 | /* | |
| 84263b0c | 757 | * SECCSR3: AES control register. |
| 95ea3627 ID |
758 | */ |
| 759 | #define SECCSR3 0x00fc | |
| 760 | ||
| 761 | /* | |
| 762 | * ASIC pointer information. | |
| 763 | * RXPTR: Current RX ring address. | |
| 764 | * TXPTR: Current Tx ring address. | |
| 765 | * PRIPTR: Current Priority ring address. | |
| 766 | * ATIMPTR: Current ATIM ring address. | |
| 767 | */ | |
| 768 | #define RXPTR 0x0100 | |
| 769 | #define TXPTR 0x0104 | |
| 770 | #define PRIPTR 0x0108 | |
| 771 | #define ATIMPTR 0x010c | |
| 772 | ||
| 773 | /* | |
| 774 | * TXACKCSR0: TX ACK timeout. | |
| 775 | */ | |
| 776 | #define TXACKCSR0 0x0110 | |
| 777 | ||
| 778 | /* | |
| 779 | * ACK timeout count registers. | |
| 780 | * ACKCNT0: TX ACK timeout count. | |
| 781 | * ACKCNT1: RX ACK timeout count. | |
| 782 | */ | |
| 783 | #define ACKCNT0 0x0114 | |
| 784 | #define ACKCNT1 0x0118 | |
| 785 | ||
| 786 | /* | |
| 787 | * GPIO and others. | |
| 788 | */ | |
| 789 | ||
| 790 | /* | |
| 791 | * GPIOCSR: GPIO control register. | |
| 792 | */ | |
| 793 | #define GPIOCSR 0x0120 | |
| 794 | #define GPIOCSR_BIT0 FIELD32(0x00000001) | |
| 795 | #define GPIOCSR_BIT1 FIELD32(0x00000002) | |
| 796 | #define GPIOCSR_BIT2 FIELD32(0x00000004) | |
| 797 | #define GPIOCSR_BIT3 FIELD32(0x00000008) | |
| 798 | #define GPIOCSR_BIT4 FIELD32(0x00000010) | |
| 799 | #define GPIOCSR_BIT5 FIELD32(0x00000020) | |
| 800 | #define GPIOCSR_BIT6 FIELD32(0x00000040) | |
| 801 | #define GPIOCSR_BIT7 FIELD32(0x00000080) | |
| 802 | #define GPIOCSR_DIR0 FIELD32(0x00000100) | |
| 803 | #define GPIOCSR_DIR1 FIELD32(0x00000200) | |
| 804 | #define GPIOCSR_DIR2 FIELD32(0x00000400) | |
| 805 | #define GPIOCSR_DIR3 FIELD32(0x00000800) | |
| 806 | #define GPIOCSR_DIR4 FIELD32(0x00001000) | |
| 807 | #define GPIOCSR_DIR5 FIELD32(0x00002000) | |
| 808 | #define GPIOCSR_DIR6 FIELD32(0x00004000) | |
| 809 | #define GPIOCSR_DIR7 FIELD32(0x00008000) | |
| 810 | ||
| 811 | /* | |
| 812 | * FIFO pointer registers. | |
| 813 | * FIFOCSR0: TX FIFO pointer. | |
| 814 | * FIFOCSR1: RX FIFO pointer. | |
| 815 | */ | |
| 816 | #define FIFOCSR0 0x0128 | |
| 817 | #define FIFOCSR1 0x012c | |
| 818 | ||
| 819 | /* | |
| 820 | * BCNCSR1: Tx BEACON offset time control register. | |
| 821 | * PRELOAD: Beacon timer offset in units of usec. | |
| 822 | * BEACON_CWMIN: 2^CwMin. | |
| 823 | */ | |
| 824 | #define BCNCSR1 0x0130 | |
| 825 | #define BCNCSR1_PRELOAD FIELD32(0x0000ffff) | |
| 826 | #define BCNCSR1_BEACON_CWMIN FIELD32(0x000f0000) | |
| 827 | ||
| 828 | /* | |
| 829 | * MACCSR2: TX_PE to RX_PE turn-around time control register | |
| 830 | * DELAY: RX_PE low width, in units of pci clock cycle. | |
| 831 | */ | |
| 832 | #define MACCSR2 0x0134 | |
| 833 | #define MACCSR2_DELAY FIELD32(0x000000ff) | |
| 834 | ||
| 835 | /* | |
| 836 | * TESTCSR: TEST mode selection register. | |
| 837 | */ | |
| 838 | #define TESTCSR 0x0138 | |
| 839 | ||
| 840 | /* | |
| 841 | * ARCSR2: 1 Mbps ACK/CTS PLCP. | |
| 842 | */ | |
| 843 | #define ARCSR2 0x013c | |
| 844 | #define ARCSR2_SIGNAL FIELD32(0x000000ff) | |
| 845 | #define ARCSR2_SERVICE FIELD32(0x0000ff00) | |
| 846 | #define ARCSR2_LENGTH FIELD32(0xffff0000) | |
| 847 | ||
| 848 | /* | |
| 849 | * ARCSR3: 2 Mbps ACK/CTS PLCP. | |
| 850 | */ | |
| 851 | #define ARCSR3 0x0140 | |
| 852 | #define ARCSR3_SIGNAL FIELD32(0x000000ff) | |
| 853 | #define ARCSR3_SERVICE FIELD32(0x0000ff00) | |
| 854 | #define ARCSR3_LENGTH FIELD32(0xffff0000) | |
| 855 | ||
| 856 | /* | |
| 857 | * ARCSR4: 5.5 Mbps ACK/CTS PLCP. | |
| 858 | */ | |
| 859 | #define ARCSR4 0x0144 | |
| 860 | #define ARCSR4_SIGNAL FIELD32(0x000000ff) | |
| 861 | #define ARCSR4_SERVICE FIELD32(0x0000ff00) | |
| 862 | #define ARCSR4_LENGTH FIELD32(0xffff0000) | |
| 863 | ||
| 864 | /* | |
| 865 | * ARCSR5: 11 Mbps ACK/CTS PLCP. | |
| 866 | */ | |
| 867 | #define ARCSR5 0x0148 | |
| 868 | #define ARCSR5_SIGNAL FIELD32(0x000000ff) | |
| 869 | #define ARCSR5_SERVICE FIELD32(0x0000ff00) | |
| 870 | #define ARCSR5_LENGTH FIELD32(0xffff0000) | |
| 871 | ||
| 872 | /* | |
| 873 | * ARTCSR0: CCK ACK/CTS payload consumed time for 1/2/5.5/11 mbps. | |
| 874 | */ | |
| 875 | #define ARTCSR0 0x014c | |
| 876 | #define ARTCSR0_ACK_CTS_11MBS FIELD32(0x000000ff) | |
| 877 | #define ARTCSR0_ACK_CTS_5_5MBS FIELD32(0x0000ff00) | |
| 878 | #define ARTCSR0_ACK_CTS_2MBS FIELD32(0x00ff0000) | |
| 879 | #define ARTCSR0_ACK_CTS_1MBS FIELD32(0xff000000) | |
| 880 | ||
| 881 | ||
| 882 | /* | |
| 883 | * ARTCSR1: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps. | |
| 884 | */ | |
| 885 | #define ARTCSR1 0x0150 | |
| 886 | #define ARTCSR1_ACK_CTS_6MBS FIELD32(0x000000ff) | |
| 887 | #define ARTCSR1_ACK_CTS_9MBS FIELD32(0x0000ff00) | |
| 888 | #define ARTCSR1_ACK_CTS_12MBS FIELD32(0x00ff0000) | |
| 889 | #define ARTCSR1_ACK_CTS_18MBS FIELD32(0xff000000) | |
| 890 | ||
| 891 | /* | |
| 892 | * ARTCSR2: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps. | |
| 893 | */ | |
| 894 | #define ARTCSR2 0x0154 | |
| 895 | #define ARTCSR2_ACK_CTS_24MBS FIELD32(0x000000ff) | |
| 896 | #define ARTCSR2_ACK_CTS_36MBS FIELD32(0x0000ff00) | |
| 897 | #define ARTCSR2_ACK_CTS_48MBS FIELD32(0x00ff0000) | |
| 898 | #define ARTCSR2_ACK_CTS_54MBS FIELD32(0xff000000) | |
| 899 | ||
| 900 | /* | |
| 84263b0c | 901 | * SECCSR1: WEP control register. |
| 95ea3627 ID |
902 | * KICK_ENCRYPT: Kick encryption engine, self-clear. |
| 903 | * ONE_SHOT: 0: ring mode, 1: One shot only mode. | |
| 904 | * DESC_ADDRESS: Descriptor physical address of frame. | |
| 905 | */ | |
| 906 | #define SECCSR1 0x0158 | |
| 907 | #define SECCSR1_KICK_ENCRYPT FIELD32(0x00000001) | |
| 908 | #define SECCSR1_ONE_SHOT FIELD32(0x00000002) | |
| 909 | #define SECCSR1_DESC_ADDRESS FIELD32(0xfffffffc) | |
| 910 | ||
| 911 | /* | |
| 912 | * BBPCSR1: BBP TX configuration. | |
| 913 | */ | |
| 914 | #define BBPCSR1 0x015c | |
| 915 | #define BBPCSR1_CCK FIELD32(0x00000003) | |
| 916 | #define BBPCSR1_CCK_FLIP FIELD32(0x00000004) | |
| 917 | #define BBPCSR1_OFDM FIELD32(0x00030000) | |
| 918 | #define BBPCSR1_OFDM_FLIP FIELD32(0x00040000) | |
| 919 | ||
| 920 | /* | |
| 921 | * Dual band configuration registers. | |
| 922 | * DBANDCSR0: Dual band configuration register 0. | |
| 923 | * DBANDCSR1: Dual band configuration register 1. | |
| 924 | */ | |
| 925 | #define DBANDCSR0 0x0160 | |
| 926 | #define DBANDCSR1 0x0164 | |
| 927 | ||
| 928 | /* | |
| 929 | * BBPPCSR: BBP Pin control register. | |
| 930 | */ | |
| 931 | #define BBPPCSR 0x0168 | |
| 932 | ||
| 933 | /* | |
| 934 | * MAC special debug mode selection registers. | |
| 935 | * DBGSEL0: MAC special debug mode selection register 0. | |
| 936 | * DBGSEL1: MAC special debug mode selection register 1. | |
| 937 | */ | |
| 938 | #define DBGSEL0 0x016c | |
| 939 | #define DBGSEL1 0x0170 | |
| 940 | ||
| 941 | /* | |
| 942 | * BISTCSR: BBP BIST register. | |
| 943 | */ | |
| 944 | #define BISTCSR 0x0174 | |
| 945 | ||
| 946 | /* | |
| 947 | * Multicast filter registers. | |
| 948 | * MCAST0: Multicast filter register 0. | |
| 949 | * MCAST1: Multicast filter register 1. | |
| 950 | */ | |
| 951 | #define MCAST0 0x0178 | |
| 952 | #define MCAST1 0x017c | |
| 953 | ||
| 954 | /* | |
| 955 | * UART registers. | |
| 956 | * UARTCSR0: UART1 TX register. | |
| 957 | * UARTCSR1: UART1 RX register. | |
| 958 | * UARTCSR3: UART1 frame control register. | |
| 959 | * UARTCSR4: UART1 buffer control register. | |
| 960 | * UART2CSR0: UART2 TX register. | |
| 961 | * UART2CSR1: UART2 RX register. | |
| 962 | * UART2CSR3: UART2 frame control register. | |
| 963 | * UART2CSR4: UART2 buffer control register. | |
| 964 | */ | |
| 965 | #define UARTCSR0 0x0180 | |
| 966 | #define UARTCSR1 0x0184 | |
| 967 | #define UARTCSR3 0x0188 | |
| 968 | #define UARTCSR4 0x018c | |
| 969 | #define UART2CSR0 0x0190 | |
| 970 | #define UART2CSR1 0x0194 | |
| 971 | #define UART2CSR3 0x0198 | |
| 972 | #define UART2CSR4 0x019c | |
| 973 | ||
| 974 | /* | |
| 975 | * BBP registers. | |
| 976 | * The wordsize of the BBP is 8 bits. | |
| 977 | */ | |
| 978 | ||
| 979 | /* | |
| 980 | * R2: TX antenna control | |
| 981 | */ | |
| 982 | #define BBP_R2_TX_ANTENNA FIELD8(0x03) | |
| 983 | #define BBP_R2_TX_IQ_FLIP FIELD8(0x04) | |
| 984 | ||
| 985 | /* | |
| 986 | * R14: RX antenna control | |
| 987 | */ | |
| 988 | #define BBP_R14_RX_ANTENNA FIELD8(0x03) | |
| 989 | #define BBP_R14_RX_IQ_FLIP FIELD8(0x04) | |
| 990 | ||
| 991 | /* | |
| 992 | * BBP_R70 | |
| 993 | */ | |
| 994 | #define BBP_R70_JAPAN_FILTER FIELD8(0x08) | |
| 995 | ||
| 996 | /* | |
| 997 | * RF registers | |
| 998 | */ | |
| 999 | ||
| 1000 | /* | |
| 1001 | * RF 1 | |
| 1002 | */ | |
| 1003 | #define RF1_TUNER FIELD32(0x00020000) | |
| 1004 | ||
| 1005 | /* | |
| 1006 | * RF 3 | |
| 1007 | */ | |
| 1008 | #define RF3_TUNER FIELD32(0x00000100) | |
| 1009 | #define RF3_TXPOWER FIELD32(0x00003e00) | |
| 1010 | ||
| 1011 | /* | |
| 1012 | * EEPROM content. | |
| 1013 | * The wordsize of the EEPROM is 16 bits. | |
| 1014 | */ | |
| 1015 | ||
| 1016 | /* | |
| 1017 | * HW MAC address. | |
| 1018 | */ | |
| 1019 | #define EEPROM_MAC_ADDR_0 0x0002 | |
| 1020 | #define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) | |
| 1021 | #define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) | |
| 1022 | #define EEPROM_MAC_ADDR1 0x0003 | |
| 1023 | #define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) | |
| 1024 | #define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) | |
| 1025 | #define EEPROM_MAC_ADDR_2 0x0004 | |
| 1026 | #define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) | |
| 1027 | #define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) | |
| 1028 | ||
| 1029 | /* | |
| 1030 | * EEPROM antenna. | |
| 1031 | * ANTENNA_NUM: Number of antenna's. | |
| 1032 | * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. | |
| 1033 | * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B. | |
| 1034 | * LED_MODE: 0: default, 1: TX/RX activity,2: Single (ignore link), 3: rsvd. | |
| 1035 | * DYN_TXAGC: Dynamic TX AGC control. | |
| 1036 | * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0. | |
| 1037 | * RF_TYPE: Rf_type of this adapter. | |
| 1038 | */ | |
| 1039 | #define EEPROM_ANTENNA 0x10 | |
| 1040 | #define EEPROM_ANTENNA_NUM FIELD16(0x0003) | |
| 1041 | #define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c) | |
| 1042 | #define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030) | |
| 1043 | #define EEPROM_ANTENNA_LED_MODE FIELD16(0x01c0) | |
| 1044 | #define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200) | |
| 1045 | #define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400) | |
| 1046 | #define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800) | |
| 1047 | ||
| 1048 | /* | |
| 1049 | * EEPROM NIC config. | |
| 1050 | * CARDBUS_ACCEL: 0: enable, 1: disable. | |
| 1051 | * DYN_BBP_TUNE: 0: enable, 1: disable. | |
| 1052 | * CCK_TX_POWER: CCK TX power compensation. | |
| 1053 | */ | |
| 1054 | #define EEPROM_NIC 0x11 | |
| 1055 | #define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0001) | |
| 1056 | #define EEPROM_NIC_DYN_BBP_TUNE FIELD16(0x0002) | |
| 1057 | #define EEPROM_NIC_CCK_TX_POWER FIELD16(0x000c) | |
| 1058 | ||
| 1059 | /* | |
| 1060 | * EEPROM geography. | |
| 1061 | * GEO: Default geography setting for device. | |
| 1062 | */ | |
| 1063 | #define EEPROM_GEOGRAPHY 0x12 | |
| 1064 | #define EEPROM_GEOGRAPHY_GEO FIELD16(0x0f00) | |
| 1065 | ||
| 1066 | /* | |
| 1067 | * EEPROM BBP. | |
| 1068 | */ | |
| 1069 | #define EEPROM_BBP_START 0x13 | |
| 1070 | #define EEPROM_BBP_SIZE 16 | |
| 1071 | #define EEPROM_BBP_VALUE FIELD16(0x00ff) | |
| 1072 | #define EEPROM_BBP_REG_ID FIELD16(0xff00) | |
| 1073 | ||
| 1074 | /* | |
| 1075 | * EEPROM TXPOWER | |
| 1076 | */ | |
| 1077 | #define EEPROM_TXPOWER_START 0x23 | |
| 1078 | #define EEPROM_TXPOWER_SIZE 7 | |
| 1079 | #define EEPROM_TXPOWER_1 FIELD16(0x00ff) | |
| 1080 | #define EEPROM_TXPOWER_2 FIELD16(0xff00) | |
| 1081 | ||
| 1082 | /* | |
| 1083 | * RSSI <-> dBm offset calibration | |
| 1084 | */ | |
| 1085 | #define EEPROM_CALIBRATE_OFFSET 0x3e | |
| 1086 | #define EEPROM_CALIBRATE_OFFSET_RSSI FIELD16(0x00ff) | |
| 1087 | ||
| 1088 | /* | |
| 1089 | * DMA descriptor defines. | |
| 1090 | */ | |
| 4bd7c452 ID |
1091 | #define TXD_DESC_SIZE ( 11 * sizeof(__le32) ) |
| 1092 | #define RXD_DESC_SIZE ( 11 * sizeof(__le32) ) | |
| 95ea3627 ID |
1093 | |
| 1094 | /* | |
| 1095 | * TX descriptor format for TX, PRIO, ATIM and Beacon Ring. | |
| 1096 | */ | |
| 1097 | ||
| 1098 | /* | |
| 1099 | * Word0 | |
| 1100 | */ | |
| 1101 | #define TXD_W0_OWNER_NIC FIELD32(0x00000001) | |
| 1102 | #define TXD_W0_VALID FIELD32(0x00000002) | |
| 1103 | #define TXD_W0_RESULT FIELD32(0x0000001c) | |
| 1104 | #define TXD_W0_RETRY_COUNT FIELD32(0x000000e0) | |
| 1105 | #define TXD_W0_MORE_FRAG FIELD32(0x00000100) | |
| 1106 | #define TXD_W0_ACK FIELD32(0x00000200) | |
| 1107 | #define TXD_W0_TIMESTAMP FIELD32(0x00000400) | |
| 1108 | #define TXD_W0_OFDM FIELD32(0x00000800) | |
| 1109 | #define TXD_W0_CIPHER_OWNER FIELD32(0x00001000) | |
| 1110 | #define TXD_W0_IFS FIELD32(0x00006000) | |
| 1111 | #define TXD_W0_RETRY_MODE FIELD32(0x00008000) | |
| 1112 | #define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) | |
| 1113 | #define TXD_W0_CIPHER_ALG FIELD32(0xe0000000) | |
| 1114 | ||
| 1115 | /* | |
| 1116 | * Word1 | |
| 1117 | */ | |
| 1118 | #define TXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff) | |
| 1119 | ||
| 1120 | /* | |
| 1121 | * Word2 | |
| 1122 | */ | |
| 1123 | #define TXD_W2_IV_OFFSET FIELD32(0x0000003f) | |
| 1124 | #define TXD_W2_AIFS FIELD32(0x000000c0) | |
| 1125 | #define TXD_W2_CWMIN FIELD32(0x00000f00) | |
| 1126 | #define TXD_W2_CWMAX FIELD32(0x0000f000) | |
| 1127 | ||
| 1128 | /* | |
| 1129 | * Word3: PLCP information | |
| 1130 | */ | |
| 1131 | #define TXD_W3_PLCP_SIGNAL FIELD32(0x000000ff) | |
| 1132 | #define TXD_W3_PLCP_SERVICE FIELD32(0x0000ff00) | |
| 1133 | #define TXD_W3_PLCP_LENGTH_LOW FIELD32(0x00ff0000) | |
| 1134 | #define TXD_W3_PLCP_LENGTH_HIGH FIELD32(0xff000000) | |
| 1135 | ||
| 1136 | /* | |
| 1137 | * Word4 | |
| 1138 | */ | |
| 1139 | #define TXD_W4_IV FIELD32(0xffffffff) | |
| 1140 | ||
| 1141 | /* | |
| 1142 | * Word5 | |
| 1143 | */ | |
| 1144 | #define TXD_W5_EIV FIELD32(0xffffffff) | |
| 1145 | ||
| 1146 | /* | |
| 1147 | * Word6-9: Key | |
| 1148 | */ | |
| 1149 | #define TXD_W6_KEY FIELD32(0xffffffff) | |
| 1150 | #define TXD_W7_KEY FIELD32(0xffffffff) | |
| 1151 | #define TXD_W8_KEY FIELD32(0xffffffff) | |
| 1152 | #define TXD_W9_KEY FIELD32(0xffffffff) | |
| 1153 | ||
| 1154 | /* | |
| 1155 | * Word10 | |
| 1156 | */ | |
| 1157 | #define TXD_W10_RTS FIELD32(0x00000001) | |
| 1158 | #define TXD_W10_TX_RATE FIELD32(0x000000fe) | |
| 1159 | ||
| 1160 | /* | |
| 1161 | * RX descriptor format for RX Ring. | |
| 1162 | */ | |
| 1163 | ||
| 1164 | /* | |
| 1165 | * Word0 | |
| 1166 | */ | |
| 1167 | #define RXD_W0_OWNER_NIC FIELD32(0x00000001) | |
| 1168 | #define RXD_W0_UNICAST_TO_ME FIELD32(0x00000002) | |
| 1169 | #define RXD_W0_MULTICAST FIELD32(0x00000004) | |
| 1170 | #define RXD_W0_BROADCAST FIELD32(0x00000008) | |
| 1171 | #define RXD_W0_MY_BSS FIELD32(0x00000010) | |
| 1172 | #define RXD_W0_CRC_ERROR FIELD32(0x00000020) | |
| 1173 | #define RXD_W0_OFDM FIELD32(0x00000040) | |
| 1174 | #define RXD_W0_PHYSICAL_ERROR FIELD32(0x00000080) | |
| 1175 | #define RXD_W0_CIPHER_OWNER FIELD32(0x00000100) | |
| 1176 | #define RXD_W0_ICV_ERROR FIELD32(0x00000200) | |
| 1177 | #define RXD_W0_IV_OFFSET FIELD32(0x0000fc00) | |
| 1178 | #define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000) | |
| 1179 | #define RXD_W0_CIPHER_ALG FIELD32(0xe0000000) | |
| 1180 | ||
| 1181 | /* | |
| 1182 | * Word1 | |
| 1183 | */ | |
| 1184 | #define RXD_W1_BUFFER_ADDRESS FIELD32(0xffffffff) | |
| 1185 | ||
| 1186 | /* | |
| 1187 | * Word2 | |
| 1188 | */ | |
| 1189 | #define RXD_W2_SIGNAL FIELD32(0x000000ff) | |
| 1190 | #define RXD_W2_RSSI FIELD32(0x0000ff00) | |
| 1191 | #define RXD_W2_TA FIELD32(0xffff0000) | |
| 1192 | ||
| 1193 | /* | |
| 1194 | * Word3 | |
| 1195 | */ | |
| 1196 | #define RXD_W3_TA FIELD32(0xffffffff) | |
| 1197 | ||
| 1198 | /* | |
| 1199 | * Word4 | |
| 1200 | */ | |
| 1201 | #define RXD_W4_IV FIELD32(0xffffffff) | |
| 1202 | ||
| 1203 | /* | |
| 1204 | * Word5 | |
| 1205 | */ | |
| 1206 | #define RXD_W5_EIV FIELD32(0xffffffff) | |
| 1207 | ||
| 1208 | /* | |
| 1209 | * Word6-9: Key | |
| 1210 | */ | |
| 1211 | #define RXD_W6_KEY FIELD32(0xffffffff) | |
| 1212 | #define RXD_W7_KEY FIELD32(0xffffffff) | |
| 1213 | #define RXD_W8_KEY FIELD32(0xffffffff) | |
| 1214 | #define RXD_W9_KEY FIELD32(0xffffffff) | |
| 1215 | ||
| 1216 | /* | |
| 1217 | * Word10 | |
| 1218 | */ | |
| 1219 | #define RXD_W10_DROP FIELD32(0x00000001) | |
| 1220 | ||
| 1221 | /* | |
| 49513481 | 1222 | * Macros for converting txpower from EEPROM to mac80211 value |
| de99ff82 | 1223 | * and from mac80211 value to register value. |
| 95ea3627 ID |
1224 | */ |
| 1225 | #define MIN_TXPOWER 0 | |
| 1226 | #define MAX_TXPOWER 31 | |
| 1227 | #define DEFAULT_TXPOWER 24 | |
| 1228 | ||
| 8c5e7a5f ID |
1229 | #define TXPOWER_FROM_DEV(__txpower) \ |
| 1230 | (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) | |
| 1231 | ||
| 1232 | #define TXPOWER_TO_DEV(__txpower) \ | |
| 1233 | clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER) | |
| 95ea3627 ID |
1234 | |
| 1235 | #endif /* RT2500PCI_H */ |