Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Copyright 1996 The Board of Trustees of The Leland Stanford | |
3 | * Junior University. All Rights Reserved. | |
4 | * | |
5 | * Permission to use, copy, modify, and distribute this | |
6 | * software and its documentation for any purpose and without | |
7 | * fee is hereby granted, provided that the above copyright | |
8 | * notice appear in all copies. Stanford University | |
9 | * makes no representations about the suitability of this | |
10 | * software for any purpose. It is provided "as is" without | |
11 | * express or implied warranty. | |
12 | * | |
13 | * strip.c This module implements Starmode Radio IP (STRIP) | |
14 | * for kernel-based devices like TTY. It interfaces between a | |
15 | * raw TTY, and the kernel's INET protocol layers (via DDI). | |
16 | * | |
17 | * Version: @(#)strip.c 1.3 July 1997 | |
18 | * | |
19 | * Author: Stuart Cheshire <cheshire@cs.stanford.edu> | |
20 | * | |
21 | * Fixes: v0.9 12th Feb 1996 (SC) | |
22 | * New byte stuffing (2+6 run-length encoding) | |
23 | * New watchdog timer task | |
24 | * New Protocol key (SIP0) | |
25 | * | |
26 | * v0.9.1 3rd March 1996 (SC) | |
27 | * Changed to dynamic device allocation -- no more compile | |
28 | * time (or boot time) limit on the number of STRIP devices. | |
29 | * | |
30 | * v0.9.2 13th March 1996 (SC) | |
31 | * Uses arp cache lookups (but doesn't send arp packets yet) | |
32 | * | |
33 | * v0.9.3 17th April 1996 (SC) | |
34 | * Fixed bug where STR_ERROR flag was getting set unneccessarily | |
35 | * (causing otherwise good packets to be unneccessarily dropped) | |
36 | * | |
37 | * v0.9.4 27th April 1996 (SC) | |
38 | * First attempt at using "&COMMAND" Starmode AT commands | |
39 | * | |
40 | * v0.9.5 29th May 1996 (SC) | |
41 | * First attempt at sending (unicast) ARP packets | |
42 | * | |
43 | * v0.9.6 5th June 1996 (Elliot) | |
44 | * Put "message level" tags in every "printk" statement | |
45 | * | |
46 | * v0.9.7 13th June 1996 (laik) | |
47 | * Added support for the /proc fs | |
48 | * | |
49 | * v0.9.8 July 1996 (Mema) | |
50 | * Added packet logging | |
51 | * | |
52 | * v1.0 November 1996 (SC) | |
53 | * Fixed (severe) memory leaks in the /proc fs code | |
54 | * Fixed race conditions in the logging code | |
55 | * | |
56 | * v1.1 January 1997 (SC) | |
57 | * Deleted packet logging (use tcpdump instead) | |
58 | * Added support for Metricom Firmware v204 features | |
59 | * (like message checksums) | |
60 | * | |
61 | * v1.2 January 1997 (SC) | |
62 | * Put portables list back in | |
63 | * | |
64 | * v1.3 July 1997 (SC) | |
65 | * Made STRIP driver set the radio's baud rate automatically. | |
66 | * It is no longer necessarily to manually set the radio's | |
67 | * rate permanently to 115200 -- the driver handles setting | |
68 | * the rate automatically. | |
69 | */ | |
70 | ||
71 | #ifdef MODULE | |
72 | static const char StripVersion[] = "1.3A-STUART.CHESHIRE-MODULAR"; | |
73 | #else | |
74 | static const char StripVersion[] = "1.3A-STUART.CHESHIRE"; | |
75 | #endif | |
76 | ||
77 | #define TICKLE_TIMERS 0 | |
78 | #define EXT_COUNTERS 1 | |
79 | ||
80 | ||
81 | /************************************************************************/ | |
82 | /* Header files */ | |
83 | ||
1da177e4 LT |
84 | #include <linux/kernel.h> |
85 | #include <linux/module.h> | |
86 | #include <linux/init.h> | |
87 | #include <linux/bitops.h> | |
88 | #include <asm/system.h> | |
89 | #include <asm/uaccess.h> | |
90 | ||
91 | # include <linux/ctype.h> | |
92 | #include <linux/string.h> | |
93 | #include <linux/mm.h> | |
94 | #include <linux/interrupt.h> | |
95 | #include <linux/in.h> | |
96 | #include <linux/tty.h> | |
97 | #include <linux/errno.h> | |
98 | #include <linux/netdevice.h> | |
99 | #include <linux/inetdevice.h> | |
100 | #include <linux/etherdevice.h> | |
101 | #include <linux/skbuff.h> | |
102 | #include <linux/if_arp.h> | |
103 | #include <linux/if_strip.h> | |
104 | #include <linux/proc_fs.h> | |
105 | #include <linux/seq_file.h> | |
106 | #include <linux/serial.h> | |
107 | #include <linux/serialP.h> | |
108 | #include <linux/rcupdate.h> | |
109 | #include <net/arp.h> | |
457c4cbc | 110 | #include <net/net_namespace.h> |
1da177e4 LT |
111 | |
112 | #include <linux/ip.h> | |
113 | #include <linux/tcp.h> | |
114 | #include <linux/time.h> | |
ff5688ae | 115 | #include <linux/jiffies.h> |
1da177e4 LT |
116 | |
117 | /************************************************************************/ | |
118 | /* Useful structures and definitions */ | |
119 | ||
120 | /* | |
121 | * A MetricomKey identifies the protocol being carried inside a Metricom | |
122 | * Starmode packet. | |
123 | */ | |
124 | ||
125 | typedef union { | |
126 | __u8 c[4]; | |
127 | __u32 l; | |
128 | } MetricomKey; | |
129 | ||
130 | /* | |
131 | * An IP address can be viewed as four bytes in memory (which is what it is) or as | |
132 | * a single 32-bit long (which is convenient for assignment, equality testing etc.) | |
133 | */ | |
134 | ||
135 | typedef union { | |
136 | __u8 b[4]; | |
137 | __u32 l; | |
138 | } IPaddr; | |
139 | ||
140 | /* | |
141 | * A MetricomAddressString is used to hold a printable representation of | |
142 | * a Metricom address. | |
143 | */ | |
144 | ||
145 | typedef struct { | |
146 | __u8 c[24]; | |
147 | } MetricomAddressString; | |
148 | ||
149 | /* Encapsulation can expand packet of size x to 65/64x + 1 | |
150 | * Sent packet looks like "<CR>*<address>*<key><encaps payload><CR>" | |
151 | * 1 1 1-18 1 4 ? 1 | |
152 | * eg. <CR>*0000-1234*SIP0<encaps payload><CR> | |
153 | * We allow 31 bytes for the stars, the key, the address and the <CR>s | |
154 | */ | |
155 | #define STRIP_ENCAP_SIZE(X) (32 + (X)*65L/64L) | |
156 | ||
157 | /* | |
158 | * A STRIP_Header is never really sent over the radio, but making a dummy | |
159 | * header for internal use within the kernel that looks like an Ethernet | |
160 | * header makes certain other software happier. For example, tcpdump | |
161 | * already understands Ethernet headers. | |
162 | */ | |
163 | ||
164 | typedef struct { | |
165 | MetricomAddress dst_addr; /* Destination address, e.g. "0000-1234" */ | |
166 | MetricomAddress src_addr; /* Source address, e.g. "0000-5678" */ | |
167 | unsigned short protocol; /* The protocol type, using Ethernet codes */ | |
168 | } STRIP_Header; | |
169 | ||
170 | typedef struct { | |
171 | char c[60]; | |
172 | } MetricomNode; | |
173 | ||
174 | #define NODE_TABLE_SIZE 32 | |
175 | typedef struct { | |
176 | struct timeval timestamp; | |
177 | int num_nodes; | |
178 | MetricomNode node[NODE_TABLE_SIZE]; | |
179 | } MetricomNodeTable; | |
180 | ||
181 | enum { FALSE = 0, TRUE = 1 }; | |
182 | ||
183 | /* | |
184 | * Holds the radio's firmware version. | |
185 | */ | |
186 | typedef struct { | |
187 | char c[50]; | |
188 | } FirmwareVersion; | |
189 | ||
190 | /* | |
191 | * Holds the radio's serial number. | |
192 | */ | |
193 | typedef struct { | |
194 | char c[18]; | |
195 | } SerialNumber; | |
196 | ||
197 | /* | |
198 | * Holds the radio's battery voltage. | |
199 | */ | |
200 | typedef struct { | |
201 | char c[11]; | |
202 | } BatteryVoltage; | |
203 | ||
204 | typedef struct { | |
205 | char c[8]; | |
206 | } char8; | |
207 | ||
208 | enum { | |
209 | NoStructure = 0, /* Really old firmware */ | |
210 | StructuredMessages = 1, /* Parsable AT response msgs */ | |
211 | ChecksummedMessages = 2 /* Parsable AT response msgs with checksums */ | |
ff1d2767 | 212 | }; |
1da177e4 LT |
213 | |
214 | struct strip { | |
215 | int magic; | |
216 | /* | |
217 | * These are pointers to the malloc()ed frame buffers. | |
218 | */ | |
219 | ||
220 | unsigned char *rx_buff; /* buffer for received IP packet */ | |
221 | unsigned char *sx_buff; /* buffer for received serial data */ | |
222 | int sx_count; /* received serial data counter */ | |
223 | int sx_size; /* Serial buffer size */ | |
224 | unsigned char *tx_buff; /* transmitter buffer */ | |
225 | unsigned char *tx_head; /* pointer to next byte to XMIT */ | |
226 | int tx_left; /* bytes left in XMIT queue */ | |
227 | int tx_size; /* Serial buffer size */ | |
228 | ||
229 | /* | |
230 | * STRIP interface statistics. | |
231 | */ | |
232 | ||
233 | unsigned long rx_packets; /* inbound frames counter */ | |
234 | unsigned long tx_packets; /* outbound frames counter */ | |
235 | unsigned long rx_errors; /* Parity, etc. errors */ | |
236 | unsigned long tx_errors; /* Planned stuff */ | |
237 | unsigned long rx_dropped; /* No memory for skb */ | |
238 | unsigned long tx_dropped; /* When MTU change */ | |
025dfdaf | 239 | unsigned long rx_over_errors; /* Frame bigger than STRIP buf. */ |
1da177e4 LT |
240 | |
241 | unsigned long pps_timer; /* Timer to determine pps */ | |
242 | unsigned long rx_pps_count; /* Counter to determine pps */ | |
243 | unsigned long tx_pps_count; /* Counter to determine pps */ | |
244 | unsigned long sx_pps_count; /* Counter to determine pps */ | |
245 | unsigned long rx_average_pps; /* rx packets per second * 8 */ | |
246 | unsigned long tx_average_pps; /* tx packets per second * 8 */ | |
247 | unsigned long sx_average_pps; /* sent packets per second * 8 */ | |
248 | ||
249 | #ifdef EXT_COUNTERS | |
250 | unsigned long rx_bytes; /* total received bytes */ | |
251 | unsigned long tx_bytes; /* total received bytes */ | |
252 | unsigned long rx_rbytes; /* bytes thru radio i/f */ | |
253 | unsigned long tx_rbytes; /* bytes thru radio i/f */ | |
254 | unsigned long rx_sbytes; /* tot bytes thru serial i/f */ | |
255 | unsigned long tx_sbytes; /* tot bytes thru serial i/f */ | |
256 | unsigned long rx_ebytes; /* tot stat/err bytes */ | |
257 | unsigned long tx_ebytes; /* tot stat/err bytes */ | |
258 | #endif | |
259 | ||
260 | /* | |
261 | * Internal variables. | |
262 | */ | |
263 | ||
264 | struct list_head list; /* Linked list of devices */ | |
265 | ||
266 | int discard; /* Set if serial error */ | |
267 | int working; /* Is radio working correctly? */ | |
268 | int firmware_level; /* Message structuring level */ | |
269 | int next_command; /* Next periodic command */ | |
270 | unsigned int user_baud; /* The user-selected baud rate */ | |
271 | int mtu; /* Our mtu (to spot changes!) */ | |
272 | long watchdog_doprobe; /* Next time to test the radio */ | |
273 | long watchdog_doreset; /* Time to do next reset */ | |
274 | long gratuitous_arp; /* Time to send next ARP refresh */ | |
275 | long arp_interval; /* Next ARP interval */ | |
276 | struct timer_list idle_timer; /* For periodic wakeup calls */ | |
277 | MetricomAddress true_dev_addr; /* True address of radio */ | |
278 | int manual_dev_addr; /* Hack: See note below */ | |
279 | ||
280 | FirmwareVersion firmware_version; /* The radio's firmware version */ | |
281 | SerialNumber serial_number; /* The radio's serial number */ | |
282 | BatteryVoltage battery_voltage; /* The radio's battery voltage */ | |
283 | ||
284 | /* | |
285 | * Other useful structures. | |
286 | */ | |
287 | ||
288 | struct tty_struct *tty; /* ptr to TTY structure */ | |
289 | struct net_device *dev; /* Our device structure */ | |
290 | ||
291 | /* | |
292 | * Neighbour radio records | |
293 | */ | |
294 | ||
295 | MetricomNodeTable portables; | |
296 | MetricomNodeTable poletops; | |
297 | }; | |
298 | ||
299 | /* | |
300 | * Note: manual_dev_addr hack | |
301 | * | |
302 | * It is not possible to change the hardware address of a Metricom radio, | |
303 | * or to send packets with a user-specified hardware source address, thus | |
304 | * trying to manually set a hardware source address is a questionable | |
305 | * thing to do. However, if the user *does* manually set the hardware | |
306 | * source address of a STRIP interface, then the kernel will believe it, | |
307 | * and use it in certain places. For example, the hardware address listed | |
308 | * by ifconfig will be the manual address, not the true one. | |
309 | * (Both addresses are listed in /proc/net/strip.) | |
310 | * Also, ARP packets will be sent out giving the user-specified address as | |
311 | * the source address, not the real address. This is dangerous, because | |
312 | * it means you won't receive any replies -- the ARP replies will go to | |
313 | * the specified address, which will be some other radio. The case where | |
314 | * this is useful is when that other radio is also connected to the same | |
315 | * machine. This allows you to connect a pair of radios to one machine, | |
316 | * and to use one exclusively for inbound traffic, and the other | |
317 | * exclusively for outbound traffic. Pretty neat, huh? | |
318 | * | |
319 | * Here's the full procedure to set this up: | |
320 | * | |
321 | * 1. "slattach" two interfaces, e.g. st0 for outgoing packets, | |
322 | * and st1 for incoming packets | |
323 | * | |
324 | * 2. "ifconfig" st0 (outbound radio) to have the hardware address | |
325 | * which is the real hardware address of st1 (inbound radio). | |
326 | * Now when it sends out packets, it will masquerade as st1, and | |
327 | * replies will be sent to that radio, which is exactly what we want. | |
328 | * | |
329 | * 3. Set the route table entry ("route add default ..." or | |
330 | * "route add -net ...", as appropriate) to send packets via the st0 | |
331 | * interface (outbound radio). Do not add any route which sends packets | |
332 | * out via the st1 interface -- that radio is for inbound traffic only. | |
333 | * | |
334 | * 4. "ifconfig" st1 (inbound radio) to have hardware address zero. | |
335 | * This tells the STRIP driver to "shut down" that interface and not | |
336 | * send any packets through it. In particular, it stops sending the | |
337 | * periodic gratuitous ARP packets that a STRIP interface normally sends. | |
338 | * Also, when packets arrive on that interface, it will search the | |
339 | * interface list to see if there is another interface who's manual | |
340 | * hardware address matches its own real address (i.e. st0 in this | |
341 | * example) and if so it will transfer ownership of the skbuff to | |
342 | * that interface, so that it looks to the kernel as if the packet | |
343 | * arrived on that interface. This is necessary because when the | |
344 | * kernel sends an ARP packet on st0, it expects to get a reply on | |
345 | * st0, and if it sees the reply come from st1 then it will ignore | |
346 | * it (to be accurate, it puts the entry in the ARP table, but | |
347 | * labelled in such a way that st0 can't use it). | |
348 | * | |
349 | * Thanks to Petros Maniatis for coming up with the idea of splitting | |
350 | * inbound and outbound traffic between two interfaces, which turned | |
351 | * out to be really easy to implement, even if it is a bit of a hack. | |
352 | * | |
353 | * Having set a manual address on an interface, you can restore it | |
354 | * to automatic operation (where the address is automatically kept | |
355 | * consistent with the real address of the radio) by setting a manual | |
356 | * address of all ones, e.g. "ifconfig st0 hw strip FFFFFFFFFFFF" | |
357 | * This 'turns off' manual override mode for the device address. | |
358 | * | |
359 | * Note: The IEEE 802 headers reported in tcpdump will show the *real* | |
360 | * radio addresses the packets were sent and received from, so that you | |
361 | * can see what is really going on with packets, and which interfaces | |
362 | * they are really going through. | |
363 | */ | |
364 | ||
365 | ||
366 | /************************************************************************/ | |
367 | /* Constants */ | |
368 | ||
369 | /* | |
370 | * CommandString1 works on all radios | |
371 | * Other CommandStrings are only used with firmware that provides structured responses. | |
372 | * | |
373 | * ats319=1 Enables Info message for node additions and deletions | |
374 | * ats319=2 Enables Info message for a new best node | |
375 | * ats319=4 Enables checksums | |
376 | * ats319=8 Enables ACK messages | |
377 | */ | |
378 | ||
379 | static const int MaxCommandStringLength = 32; | |
380 | static const int CompatibilityCommand = 1; | |
381 | ||
382 | static const char CommandString0[] = "*&COMMAND*ATS319=7"; /* Turn on checksums & info messages */ | |
383 | static const char CommandString1[] = "*&COMMAND*ATS305?"; /* Query radio name */ | |
384 | static const char CommandString2[] = "*&COMMAND*ATS325?"; /* Query battery voltage */ | |
385 | static const char CommandString3[] = "*&COMMAND*ATS300?"; /* Query version information */ | |
386 | static const char CommandString4[] = "*&COMMAND*ATS311?"; /* Query poletop list */ | |
387 | static const char CommandString5[] = "*&COMMAND*AT~LA"; /* Query portables list */ | |
388 | typedef struct { | |
389 | const char *string; | |
390 | long length; | |
391 | } StringDescriptor; | |
392 | ||
393 | static const StringDescriptor CommandString[] = { | |
394 | {CommandString0, sizeof(CommandString0) - 1}, | |
395 | {CommandString1, sizeof(CommandString1) - 1}, | |
396 | {CommandString2, sizeof(CommandString2) - 1}, | |
397 | {CommandString3, sizeof(CommandString3) - 1}, | |
398 | {CommandString4, sizeof(CommandString4) - 1}, | |
399 | {CommandString5, sizeof(CommandString5) - 1} | |
400 | }; | |
401 | ||
402 | #define GOT_ALL_RADIO_INFO(S) \ | |
403 | ((S)->firmware_version.c[0] && \ | |
404 | (S)->battery_voltage.c[0] && \ | |
405 | memcmp(&(S)->true_dev_addr, zero_address.c, sizeof(zero_address))) | |
406 | ||
407 | static const char hextable[16] = "0123456789ABCDEF"; | |
408 | ||
409 | static const MetricomAddress zero_address; | |
410 | static const MetricomAddress broadcast_address = | |
411 | { {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} }; | |
412 | ||
413 | static const MetricomKey SIP0Key = { "SIP0" }; | |
414 | static const MetricomKey ARP0Key = { "ARP0" }; | |
415 | static const MetricomKey ATR_Key = { "ATR " }; | |
416 | static const MetricomKey ACK_Key = { "ACK_" }; | |
417 | static const MetricomKey INF_Key = { "INF_" }; | |
418 | static const MetricomKey ERR_Key = { "ERR_" }; | |
419 | ||
420 | static const long MaxARPInterval = 60 * HZ; /* One minute */ | |
421 | ||
422 | /* | |
423 | * Maximum Starmode packet length is 1183 bytes. Allowing 4 bytes for | |
424 | * protocol key, 4 bytes for checksum, one byte for CR, and 65/64 expansion | |
425 | * for STRIP encoding, that translates to a maximum payload MTU of 1155. | |
426 | * Note: A standard NFS 1K data packet is a total of 0x480 (1152) bytes | |
427 | * long, including IP header, UDP header, and NFS header. Setting the STRIP | |
428 | * MTU to 1152 allows us to send default sized NFS packets without fragmentation. | |
429 | */ | |
430 | static const unsigned short MAX_SEND_MTU = 1152; | |
431 | static const unsigned short MAX_RECV_MTU = 1500; /* Hoping for Ethernet sized packets in the future! */ | |
432 | static const unsigned short DEFAULT_STRIP_MTU = 1152; | |
433 | static const int STRIP_MAGIC = 0x5303; | |
434 | static const long LongTime = 0x7FFFFFFF; | |
435 | ||
436 | /************************************************************************/ | |
437 | /* Global variables */ | |
438 | ||
439 | static LIST_HEAD(strip_list); | |
440 | static DEFINE_SPINLOCK(strip_lock); | |
441 | ||
442 | /************************************************************************/ | |
443 | /* Macros */ | |
444 | ||
445 | /* Returns TRUE if text T begins with prefix P */ | |
446 | #define has_prefix(T,L,P) (((L) >= sizeof(P)-1) && !strncmp((T), (P), sizeof(P)-1)) | |
447 | ||
448 | /* Returns TRUE if text T of length L is equal to string S */ | |
449 | #define text_equal(T,L,S) (((L) == sizeof(S)-1) && !strncmp((T), (S), sizeof(S)-1)) | |
450 | ||
451 | #define READHEX(X) ((X)>='0' && (X)<='9' ? (X)-'0' : \ | |
452 | (X)>='a' && (X)<='f' ? (X)-'a'+10 : \ | |
453 | (X)>='A' && (X)<='F' ? (X)-'A'+10 : 0 ) | |
454 | ||
455 | #define READHEX16(X) ((__u16)(READHEX(X))) | |
456 | ||
457 | #define READDEC(X) ((X)>='0' && (X)<='9' ? (X)-'0' : 0) | |
458 | ||
459 | #define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)])) | |
460 | ||
461 | #define JIFFIE_TO_SEC(X) ((X) / HZ) | |
462 | ||
463 | ||
464 | /************************************************************************/ | |
465 | /* Utility routines */ | |
466 | ||
467 | static int arp_query(unsigned char *haddr, u32 paddr, | |
468 | struct net_device *dev) | |
469 | { | |
470 | struct neighbour *neighbor_entry; | |
ee1377c3 | 471 | int ret = 0; |
1da177e4 LT |
472 | |
473 | neighbor_entry = neigh_lookup(&arp_tbl, &paddr, dev); | |
474 | ||
475 | if (neighbor_entry != NULL) { | |
476 | neighbor_entry->used = jiffies; | |
477 | if (neighbor_entry->nud_state & NUD_VALID) { | |
478 | memcpy(haddr, neighbor_entry->ha, dev->addr_len); | |
ee1377c3 | 479 | ret = 1; |
1da177e4 | 480 | } |
ee1377c3 | 481 | neigh_release(neighbor_entry); |
1da177e4 | 482 | } |
ee1377c3 | 483 | return ret; |
1da177e4 LT |
484 | } |
485 | ||
486 | static void DumpData(char *msg, struct strip *strip_info, __u8 * ptr, | |
487 | __u8 * end) | |
488 | { | |
489 | static const int MAX_DumpData = 80; | |
490 | __u8 pkt_text[MAX_DumpData], *p = pkt_text; | |
491 | ||
492 | *p++ = '\"'; | |
493 | ||
494 | while (ptr < end && p < &pkt_text[MAX_DumpData - 4]) { | |
495 | if (*ptr == '\\') { | |
496 | *p++ = '\\'; | |
497 | *p++ = '\\'; | |
498 | } else { | |
499 | if (*ptr >= 32 && *ptr <= 126) { | |
500 | *p++ = *ptr; | |
501 | } else { | |
502 | sprintf(p, "\\%02X", *ptr); | |
503 | p += 3; | |
504 | } | |
505 | } | |
506 | ptr++; | |
507 | } | |
508 | ||
509 | if (ptr == end) | |
510 | *p++ = '\"'; | |
511 | *p++ = 0; | |
512 | ||
513 | printk(KERN_INFO "%s: %-13s%s\n", strip_info->dev->name, msg, pkt_text); | |
514 | } | |
515 | ||
516 | ||
517 | /************************************************************************/ | |
518 | /* Byte stuffing/unstuffing routines */ | |
519 | ||
520 | /* Stuffing scheme: | |
521 | * 00 Unused (reserved character) | |
522 | * 01-3F Run of 2-64 different characters | |
523 | * 40-7F Run of 1-64 different characters plus a single zero at the end | |
524 | * 80-BF Run of 1-64 of the same character | |
525 | * C0-FF Run of 1-64 zeroes (ASCII 0) | |
526 | */ | |
527 | ||
528 | typedef enum { | |
529 | Stuff_Diff = 0x00, | |
530 | Stuff_DiffZero = 0x40, | |
531 | Stuff_Same = 0x80, | |
532 | Stuff_Zero = 0xC0, | |
533 | Stuff_NoCode = 0xFF, /* Special code, meaning no code selected */ | |
534 | ||
535 | Stuff_CodeMask = 0xC0, | |
536 | Stuff_CountMask = 0x3F, | |
537 | Stuff_MaxCount = 0x3F, | |
538 | Stuff_Magic = 0x0D /* The value we are eliminating */ | |
539 | } StuffingCode; | |
540 | ||
541 | /* StuffData encodes the data starting at "src" for "length" bytes. | |
542 | * It writes it to the buffer pointed to by "dst" (which must be at least | |
543 | * as long as 1 + 65/64 of the input length). The output may be up to 1.6% | |
544 | * larger than the input for pathological input, but will usually be smaller. | |
545 | * StuffData returns the new value of the dst pointer as its result. | |
546 | * "code_ptr_ptr" points to a "__u8 *" which is used to hold encoding state | |
547 | * between calls, allowing an encoded packet to be incrementally built up | |
548 | * from small parts. On the first call, the "__u8 *" pointed to should be | |
549 | * initialized to NULL; between subsequent calls the calling routine should | |
550 | * leave the value alone and simply pass it back unchanged so that the | |
551 | * encoder can recover its current state. | |
552 | */ | |
553 | ||
554 | #define StuffData_FinishBlock(X) \ | |
555 | (*code_ptr = (X) ^ Stuff_Magic, code = Stuff_NoCode) | |
556 | ||
557 | static __u8 *StuffData(__u8 * src, __u32 length, __u8 * dst, | |
558 | __u8 ** code_ptr_ptr) | |
559 | { | |
560 | __u8 *end = src + length; | |
561 | __u8 *code_ptr = *code_ptr_ptr; | |
562 | __u8 code = Stuff_NoCode, count = 0; | |
563 | ||
564 | if (!length) | |
565 | return (dst); | |
566 | ||
567 | if (code_ptr) { | |
568 | /* | |
569 | * Recover state from last call, if applicable | |
570 | */ | |
571 | code = (*code_ptr ^ Stuff_Magic) & Stuff_CodeMask; | |
572 | count = (*code_ptr ^ Stuff_Magic) & Stuff_CountMask; | |
573 | } | |
574 | ||
575 | while (src < end) { | |
576 | switch (code) { | |
577 | /* Stuff_NoCode: If no current code, select one */ | |
578 | case Stuff_NoCode: | |
579 | /* Record where we're going to put this code */ | |
580 | code_ptr = dst++; | |
581 | count = 0; /* Reset the count (zero means one instance) */ | |
582 | /* Tentatively start a new block */ | |
583 | if (*src == 0) { | |
584 | code = Stuff_Zero; | |
585 | src++; | |
586 | } else { | |
587 | code = Stuff_Same; | |
588 | *dst++ = *src++ ^ Stuff_Magic; | |
589 | } | |
590 | /* Note: We optimistically assume run of same -- */ | |
591 | /* which will be fixed later in Stuff_Same */ | |
592 | /* if it turns out not to be true. */ | |
593 | break; | |
594 | ||
595 | /* Stuff_Zero: We already have at least one zero encoded */ | |
596 | case Stuff_Zero: | |
597 | /* If another zero, count it, else finish this code block */ | |
598 | if (*src == 0) { | |
599 | count++; | |
600 | src++; | |
601 | } else { | |
602 | StuffData_FinishBlock(Stuff_Zero + count); | |
603 | } | |
604 | break; | |
605 | ||
606 | /* Stuff_Same: We already have at least one byte encoded */ | |
607 | case Stuff_Same: | |
608 | /* If another one the same, count it */ | |
609 | if ((*src ^ Stuff_Magic) == code_ptr[1]) { | |
610 | count++; | |
611 | src++; | |
612 | break; | |
613 | } | |
614 | /* else, this byte does not match this block. */ | |
615 | /* If we already have two or more bytes encoded, finish this code block */ | |
616 | if (count) { | |
617 | StuffData_FinishBlock(Stuff_Same + count); | |
618 | break; | |
619 | } | |
620 | /* else, we only have one so far, so switch to Stuff_Diff code */ | |
621 | code = Stuff_Diff; | |
622 | /* and fall through to Stuff_Diff case below | |
623 | * Note cunning cleverness here: case Stuff_Diff compares | |
624 | * the current character with the previous two to see if it | |
625 | * has a run of three the same. Won't this be an error if | |
626 | * there aren't two previous characters stored to compare with? | |
627 | * No. Because we know the current character is *not* the same | |
628 | * as the previous one, the first test below will necessarily | |
629 | * fail and the send half of the "if" won't be executed. | |
630 | */ | |
631 | ||
632 | /* Stuff_Diff: We have at least two *different* bytes encoded */ | |
633 | case Stuff_Diff: | |
634 | /* If this is a zero, must encode a Stuff_DiffZero, and begin a new block */ | |
635 | if (*src == 0) { | |
636 | StuffData_FinishBlock(Stuff_DiffZero + | |
637 | count); | |
638 | } | |
639 | /* else, if we have three in a row, it is worth starting a Stuff_Same block */ | |
640 | else if ((*src ^ Stuff_Magic) == dst[-1] | |
641 | && dst[-1] == dst[-2]) { | |
642 | /* Back off the last two characters we encoded */ | |
643 | code += count - 2; | |
644 | /* Note: "Stuff_Diff + 0" is an illegal code */ | |
645 | if (code == Stuff_Diff + 0) { | |
646 | code = Stuff_Same + 0; | |
647 | } | |
648 | StuffData_FinishBlock(code); | |
649 | code_ptr = dst - 2; | |
650 | /* dst[-1] already holds the correct value */ | |
651 | count = 2; /* 2 means three bytes encoded */ | |
652 | code = Stuff_Same; | |
653 | } | |
654 | /* else, another different byte, so add it to the block */ | |
655 | else { | |
656 | *dst++ = *src ^ Stuff_Magic; | |
657 | count++; | |
658 | } | |
659 | src++; /* Consume the byte */ | |
660 | break; | |
661 | } | |
662 | if (count == Stuff_MaxCount) { | |
663 | StuffData_FinishBlock(code + count); | |
664 | } | |
665 | } | |
666 | if (code == Stuff_NoCode) { | |
667 | *code_ptr_ptr = NULL; | |
668 | } else { | |
669 | *code_ptr_ptr = code_ptr; | |
670 | StuffData_FinishBlock(code + count); | |
671 | } | |
672 | return (dst); | |
673 | } | |
674 | ||
675 | /* | |
676 | * UnStuffData decodes the data at "src", up to (but not including) "end". | |
677 | * It writes the decoded data into the buffer pointed to by "dst", up to a | |
678 | * maximum of "dst_length", and returns the new value of "src" so that a | |
679 | * follow-on call can read more data, continuing from where the first left off. | |
680 | * | |
681 | * There are three types of results: | |
682 | * 1. The source data runs out before extracting "dst_length" bytes: | |
683 | * UnStuffData returns NULL to indicate failure. | |
684 | * 2. The source data produces exactly "dst_length" bytes: | |
685 | * UnStuffData returns new_src = end to indicate that all bytes were consumed. | |
686 | * 3. "dst_length" bytes are extracted, with more remaining. | |
687 | * UnStuffData returns new_src < end to indicate that there are more bytes | |
688 | * to be read. | |
689 | * | |
690 | * Note: The decoding may be destructive, in that it may alter the source | |
691 | * data in the process of decoding it (this is necessary to allow a follow-on | |
692 | * call to resume correctly). | |
693 | */ | |
694 | ||
695 | static __u8 *UnStuffData(__u8 * src, __u8 * end, __u8 * dst, | |
696 | __u32 dst_length) | |
697 | { | |
698 | __u8 *dst_end = dst + dst_length; | |
699 | /* Sanity check */ | |
700 | if (!src || !end || !dst || !dst_length) | |
701 | return (NULL); | |
702 | while (src < end && dst < dst_end) { | |
703 | int count = (*src ^ Stuff_Magic) & Stuff_CountMask; | |
704 | switch ((*src ^ Stuff_Magic) & Stuff_CodeMask) { | |
705 | case Stuff_Diff: | |
706 | if (src + 1 + count >= end) | |
707 | return (NULL); | |
708 | do { | |
709 | *dst++ = *++src ^ Stuff_Magic; | |
710 | } | |
711 | while (--count >= 0 && dst < dst_end); | |
712 | if (count < 0) | |
713 | src += 1; | |
714 | else { | |
715 | if (count == 0) | |
716 | *src = Stuff_Same ^ Stuff_Magic; | |
717 | else | |
718 | *src = | |
719 | (Stuff_Diff + | |
720 | count) ^ Stuff_Magic; | |
721 | } | |
722 | break; | |
723 | case Stuff_DiffZero: | |
724 | if (src + 1 + count >= end) | |
725 | return (NULL); | |
726 | do { | |
727 | *dst++ = *++src ^ Stuff_Magic; | |
728 | } | |
729 | while (--count >= 0 && dst < dst_end); | |
730 | if (count < 0) | |
731 | *src = Stuff_Zero ^ Stuff_Magic; | |
732 | else | |
733 | *src = | |
734 | (Stuff_DiffZero + count) ^ Stuff_Magic; | |
735 | break; | |
736 | case Stuff_Same: | |
737 | if (src + 1 >= end) | |
738 | return (NULL); | |
739 | do { | |
740 | *dst++ = src[1] ^ Stuff_Magic; | |
741 | } | |
742 | while (--count >= 0 && dst < dst_end); | |
743 | if (count < 0) | |
744 | src += 2; | |
745 | else | |
746 | *src = (Stuff_Same + count) ^ Stuff_Magic; | |
747 | break; | |
748 | case Stuff_Zero: | |
749 | do { | |
750 | *dst++ = 0; | |
751 | } | |
752 | while (--count >= 0 && dst < dst_end); | |
753 | if (count < 0) | |
754 | src += 1; | |
755 | else | |
756 | *src = (Stuff_Zero + count) ^ Stuff_Magic; | |
757 | break; | |
758 | } | |
759 | } | |
760 | if (dst < dst_end) | |
761 | return (NULL); | |
762 | else | |
763 | return (src); | |
764 | } | |
765 | ||
766 | ||
767 | /************************************************************************/ | |
768 | /* General routines for STRIP */ | |
769 | ||
1da177e4 LT |
770 | /* |
771 | * set_baud sets the baud rate to the rate defined by baudcode | |
1da177e4 | 772 | */ |
8e8bcf16 | 773 | static void set_baud(struct tty_struct *tty, speed_t baudrate) |
1da177e4 | 774 | { |
8e8bcf16 AC |
775 | struct ktermios old_termios; |
776 | ||
777 | mutex_lock(&tty->termios_mutex); | |
778 | old_termios =*(tty->termios); | |
779 | tty_encode_baud_rate(tty, baudrate, baudrate); | |
780 | tty->ops->set_termios(tty, &old_termios); | |
781 | mutex_unlock(&tty->termios_mutex); | |
1da177e4 LT |
782 | } |
783 | ||
784 | /* | |
785 | * Convert a string to a Metricom Address. | |
786 | */ | |
787 | ||
788 | #define IS_RADIO_ADDRESS(p) ( \ | |
789 | isdigit((p)[0]) && isdigit((p)[1]) && isdigit((p)[2]) && isdigit((p)[3]) && \ | |
790 | (p)[4] == '-' && \ | |
791 | isdigit((p)[5]) && isdigit((p)[6]) && isdigit((p)[7]) && isdigit((p)[8]) ) | |
792 | ||
793 | static int string_to_radio_address(MetricomAddress * addr, __u8 * p) | |
794 | { | |
795 | if (!IS_RADIO_ADDRESS(p)) | |
796 | return (1); | |
797 | addr->c[0] = 0; | |
798 | addr->c[1] = 0; | |
799 | addr->c[2] = READHEX(p[0]) << 4 | READHEX(p[1]); | |
800 | addr->c[3] = READHEX(p[2]) << 4 | READHEX(p[3]); | |
801 | addr->c[4] = READHEX(p[5]) << 4 | READHEX(p[6]); | |
802 | addr->c[5] = READHEX(p[7]) << 4 | READHEX(p[8]); | |
803 | return (0); | |
804 | } | |
805 | ||
806 | /* | |
807 | * Convert a Metricom Address to a string. | |
808 | */ | |
809 | ||
810 | static __u8 *radio_address_to_string(const MetricomAddress * addr, | |
811 | MetricomAddressString * p) | |
812 | { | |
813 | sprintf(p->c, "%02X%02X-%02X%02X", addr->c[2], addr->c[3], | |
814 | addr->c[4], addr->c[5]); | |
815 | return (p->c); | |
816 | } | |
817 | ||
818 | /* | |
819 | * Note: Must make sure sx_size is big enough to receive a stuffed | |
820 | * MAX_RECV_MTU packet. Additionally, we also want to ensure that it's | |
821 | * big enough to receive a large radio neighbour list (currently 4K). | |
822 | */ | |
823 | ||
824 | static int allocate_buffers(struct strip *strip_info, int mtu) | |
825 | { | |
826 | struct net_device *dev = strip_info->dev; | |
827 | int sx_size = max_t(int, STRIP_ENCAP_SIZE(MAX_RECV_MTU), 4096); | |
828 | int tx_size = STRIP_ENCAP_SIZE(mtu) + MaxCommandStringLength; | |
829 | __u8 *r = kmalloc(MAX_RECV_MTU, GFP_ATOMIC); | |
830 | __u8 *s = kmalloc(sx_size, GFP_ATOMIC); | |
831 | __u8 *t = kmalloc(tx_size, GFP_ATOMIC); | |
832 | if (r && s && t) { | |
833 | strip_info->rx_buff = r; | |
834 | strip_info->sx_buff = s; | |
835 | strip_info->tx_buff = t; | |
836 | strip_info->sx_size = sx_size; | |
837 | strip_info->tx_size = tx_size; | |
838 | strip_info->mtu = dev->mtu = mtu; | |
839 | return (1); | |
840 | } | |
b4558ea9 JJ |
841 | kfree(r); |
842 | kfree(s); | |
843 | kfree(t); | |
1da177e4 LT |
844 | return (0); |
845 | } | |
846 | ||
847 | /* | |
848 | * MTU has been changed by the IP layer. | |
849 | * We could be in | |
850 | * an upcall from the tty driver, or in an ip packet queue. | |
851 | */ | |
852 | static int strip_change_mtu(struct net_device *dev, int new_mtu) | |
853 | { | |
854 | struct strip *strip_info = netdev_priv(dev); | |
855 | int old_mtu = strip_info->mtu; | |
856 | unsigned char *orbuff = strip_info->rx_buff; | |
857 | unsigned char *osbuff = strip_info->sx_buff; | |
858 | unsigned char *otbuff = strip_info->tx_buff; | |
859 | ||
860 | if (new_mtu > MAX_SEND_MTU) { | |
861 | printk(KERN_ERR | |
862 | "%s: MTU exceeds maximum allowable (%d), MTU change cancelled.\n", | |
863 | strip_info->dev->name, MAX_SEND_MTU); | |
864 | return -EINVAL; | |
865 | } | |
866 | ||
867 | spin_lock_bh(&strip_lock); | |
868 | if (!allocate_buffers(strip_info, new_mtu)) { | |
869 | printk(KERN_ERR "%s: unable to grow strip buffers, MTU change cancelled.\n", | |
870 | strip_info->dev->name); | |
871 | spin_unlock_bh(&strip_lock); | |
872 | return -ENOMEM; | |
873 | } | |
874 | ||
875 | if (strip_info->sx_count) { | |
876 | if (strip_info->sx_count <= strip_info->sx_size) | |
877 | memcpy(strip_info->sx_buff, osbuff, | |
878 | strip_info->sx_count); | |
879 | else { | |
880 | strip_info->discard = strip_info->sx_count; | |
881 | strip_info->rx_over_errors++; | |
882 | } | |
883 | } | |
884 | ||
885 | if (strip_info->tx_left) { | |
886 | if (strip_info->tx_left <= strip_info->tx_size) | |
887 | memcpy(strip_info->tx_buff, strip_info->tx_head, | |
888 | strip_info->tx_left); | |
889 | else { | |
890 | strip_info->tx_left = 0; | |
891 | strip_info->tx_dropped++; | |
892 | } | |
893 | } | |
894 | strip_info->tx_head = strip_info->tx_buff; | |
895 | spin_unlock_bh(&strip_lock); | |
896 | ||
897 | printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n", | |
898 | strip_info->dev->name, old_mtu, strip_info->mtu); | |
899 | ||
b4558ea9 JJ |
900 | kfree(orbuff); |
901 | kfree(osbuff); | |
902 | kfree(otbuff); | |
1da177e4 LT |
903 | return 0; |
904 | } | |
905 | ||
906 | static void strip_unlock(struct strip *strip_info) | |
907 | { | |
908 | /* | |
909 | * Set the timer to go off in one second. | |
910 | */ | |
911 | strip_info->idle_timer.expires = jiffies + 1 * HZ; | |
912 | add_timer(&strip_info->idle_timer); | |
913 | netif_wake_queue(strip_info->dev); | |
914 | } | |
915 | ||
916 | ||
917 | ||
918 | /* | |
919 | * If the time is in the near future, time_delta prints the number of | |
920 | * seconds to go into the buffer and returns the address of the buffer. | |
921 | * If the time is not in the near future, it returns the address of the | |
922 | * string "Not scheduled" The buffer must be long enough to contain the | |
923 | * ascii representation of the number plus 9 charactes for the " seconds" | |
924 | * and the null character. | |
925 | */ | |
926 | #ifdef CONFIG_PROC_FS | |
927 | static char *time_delta(char buffer[], long time) | |
928 | { | |
929 | time -= jiffies; | |
930 | if (time > LongTime / 2) | |
931 | return ("Not scheduled"); | |
932 | if (time < 0) | |
933 | time = 0; /* Don't print negative times */ | |
934 | sprintf(buffer, "%ld seconds", time / HZ); | |
935 | return (buffer); | |
936 | } | |
937 | ||
938 | /* get Nth element of the linked list */ | |
939 | static struct strip *strip_get_idx(loff_t pos) | |
940 | { | |
013b73fa | 941 | struct strip *str; |
1da177e4 LT |
942 | int i = 0; |
943 | ||
013b73fa | 944 | list_for_each_entry_rcu(str, &strip_list, list) { |
1da177e4 | 945 | if (pos == i) |
013b73fa | 946 | return str; |
1da177e4 LT |
947 | ++i; |
948 | } | |
949 | return NULL; | |
950 | } | |
951 | ||
952 | static void *strip_seq_start(struct seq_file *seq, loff_t *pos) | |
b1ae1e99 | 953 | __acquires(RCU) |
1da177e4 LT |
954 | { |
955 | rcu_read_lock(); | |
956 | return *pos ? strip_get_idx(*pos - 1) : SEQ_START_TOKEN; | |
957 | } | |
958 | ||
959 | static void *strip_seq_next(struct seq_file *seq, void *v, loff_t *pos) | |
960 | { | |
961 | struct list_head *l; | |
962 | struct strip *s; | |
963 | ||
964 | ++*pos; | |
965 | if (v == SEQ_START_TOKEN) | |
966 | return strip_get_idx(1); | |
967 | ||
968 | s = v; | |
969 | l = &s->list; | |
970 | list_for_each_continue_rcu(l, &strip_list) { | |
971 | return list_entry(l, struct strip, list); | |
972 | } | |
973 | return NULL; | |
974 | } | |
975 | ||
976 | static void strip_seq_stop(struct seq_file *seq, void *v) | |
b1ae1e99 | 977 | __releases(RCU) |
1da177e4 LT |
978 | { |
979 | rcu_read_unlock(); | |
980 | } | |
981 | ||
982 | static void strip_seq_neighbours(struct seq_file *seq, | |
983 | const MetricomNodeTable * table, | |
984 | const char *title) | |
985 | { | |
986 | /* We wrap this in a do/while loop, so if the table changes */ | |
987 | /* while we're reading it, we just go around and try again. */ | |
988 | struct timeval t; | |
989 | ||
990 | do { | |
991 | int i; | |
992 | t = table->timestamp; | |
993 | if (table->num_nodes) | |
994 | seq_printf(seq, "\n %s\n", title); | |
995 | for (i = 0; i < table->num_nodes; i++) { | |
996 | MetricomNode node; | |
997 | ||
998 | spin_lock_bh(&strip_lock); | |
999 | node = table->node[i]; | |
1000 | spin_unlock_bh(&strip_lock); | |
1001 | seq_printf(seq, " %s\n", node.c); | |
1002 | } | |
1003 | } while (table->timestamp.tv_sec != t.tv_sec | |
1004 | || table->timestamp.tv_usec != t.tv_usec); | |
1005 | } | |
1006 | ||
1007 | /* | |
1008 | * This function prints radio status information via the seq_file | |
1009 | * interface. The interface takes care of buffer size and over | |
1010 | * run issues. | |
1011 | * | |
1012 | * The buffer in seq_file is PAGESIZE (4K) | |
1013 | * so this routine should never print more or it will get truncated. | |
1014 | * With the maximum of 32 portables and 32 poletops | |
1015 | * reported, the routine outputs 3107 bytes into the buffer. | |
1016 | */ | |
1017 | static void strip_seq_status_info(struct seq_file *seq, | |
1018 | const struct strip *strip_info) | |
1019 | { | |
1020 | char temp[32]; | |
1021 | MetricomAddressString addr_string; | |
1022 | ||
1023 | /* First, we must copy all of our data to a safe place, */ | |
1024 | /* in case a serial interrupt comes in and changes it. */ | |
1025 | int tx_left = strip_info->tx_left; | |
1026 | unsigned long rx_average_pps = strip_info->rx_average_pps; | |
1027 | unsigned long tx_average_pps = strip_info->tx_average_pps; | |
1028 | unsigned long sx_average_pps = strip_info->sx_average_pps; | |
1029 | int working = strip_info->working; | |
1030 | int firmware_level = strip_info->firmware_level; | |
1031 | long watchdog_doprobe = strip_info->watchdog_doprobe; | |
1032 | long watchdog_doreset = strip_info->watchdog_doreset; | |
1033 | long gratuitous_arp = strip_info->gratuitous_arp; | |
1034 | long arp_interval = strip_info->arp_interval; | |
1035 | FirmwareVersion firmware_version = strip_info->firmware_version; | |
1036 | SerialNumber serial_number = strip_info->serial_number; | |
1037 | BatteryVoltage battery_voltage = strip_info->battery_voltage; | |
1038 | char *if_name = strip_info->dev->name; | |
1039 | MetricomAddress true_dev_addr = strip_info->true_dev_addr; | |
1040 | MetricomAddress dev_dev_addr = | |
1041 | *(MetricomAddress *) strip_info->dev->dev_addr; | |
1042 | int manual_dev_addr = strip_info->manual_dev_addr; | |
1043 | #ifdef EXT_COUNTERS | |
1044 | unsigned long rx_bytes = strip_info->rx_bytes; | |
1045 | unsigned long tx_bytes = strip_info->tx_bytes; | |
1046 | unsigned long rx_rbytes = strip_info->rx_rbytes; | |
1047 | unsigned long tx_rbytes = strip_info->tx_rbytes; | |
1048 | unsigned long rx_sbytes = strip_info->rx_sbytes; | |
1049 | unsigned long tx_sbytes = strip_info->tx_sbytes; | |
1050 | unsigned long rx_ebytes = strip_info->rx_ebytes; | |
1051 | unsigned long tx_ebytes = strip_info->tx_ebytes; | |
1052 | #endif | |
1053 | ||
1054 | seq_printf(seq, "\nInterface name\t\t%s\n", if_name); | |
1055 | seq_printf(seq, " Radio working:\t\t%s\n", working ? "Yes" : "No"); | |
1056 | radio_address_to_string(&true_dev_addr, &addr_string); | |
1057 | seq_printf(seq, " Radio address:\t\t%s\n", addr_string.c); | |
1058 | if (manual_dev_addr) { | |
1059 | radio_address_to_string(&dev_dev_addr, &addr_string); | |
1060 | seq_printf(seq, " Device address:\t%s\n", addr_string.c); | |
1061 | } | |
1062 | seq_printf(seq, " Firmware version:\t%s", !working ? "Unknown" : | |
1063 | !firmware_level ? "Should be upgraded" : | |
1064 | firmware_version.c); | |
1065 | if (firmware_level >= ChecksummedMessages) | |
1066 | seq_printf(seq, " (Checksums Enabled)"); | |
1067 | seq_printf(seq, "\n"); | |
1068 | seq_printf(seq, " Serial number:\t\t%s\n", serial_number.c); | |
1069 | seq_printf(seq, " Battery voltage:\t%s\n", battery_voltage.c); | |
1070 | seq_printf(seq, " Transmit queue (bytes):%d\n", tx_left); | |
1071 | seq_printf(seq, " Receive packet rate: %ld packets per second\n", | |
1072 | rx_average_pps / 8); | |
1073 | seq_printf(seq, " Transmit packet rate: %ld packets per second\n", | |
1074 | tx_average_pps / 8); | |
1075 | seq_printf(seq, " Sent packet rate: %ld packets per second\n", | |
1076 | sx_average_pps / 8); | |
1077 | seq_printf(seq, " Next watchdog probe:\t%s\n", | |
1078 | time_delta(temp, watchdog_doprobe)); | |
1079 | seq_printf(seq, " Next watchdog reset:\t%s\n", | |
1080 | time_delta(temp, watchdog_doreset)); | |
1081 | seq_printf(seq, " Next gratuitous ARP:\t"); | |
1082 | ||
1083 | if (!memcmp | |
1084 | (strip_info->dev->dev_addr, zero_address.c, | |
1085 | sizeof(zero_address))) | |
1086 | seq_printf(seq, "Disabled\n"); | |
1087 | else { | |
1088 | seq_printf(seq, "%s\n", time_delta(temp, gratuitous_arp)); | |
1089 | seq_printf(seq, " Next ARP interval:\t%ld seconds\n", | |
1090 | JIFFIE_TO_SEC(arp_interval)); | |
1091 | } | |
1092 | ||
1093 | if (working) { | |
1094 | #ifdef EXT_COUNTERS | |
1095 | seq_printf(seq, "\n"); | |
1096 | seq_printf(seq, | |
1097 | " Total bytes: \trx:\t%lu\ttx:\t%lu\n", | |
1098 | rx_bytes, tx_bytes); | |
1099 | seq_printf(seq, | |
1100 | " thru radio: \trx:\t%lu\ttx:\t%lu\n", | |
1101 | rx_rbytes, tx_rbytes); | |
1102 | seq_printf(seq, | |
1103 | " thru serial port: \trx:\t%lu\ttx:\t%lu\n", | |
1104 | rx_sbytes, tx_sbytes); | |
1105 | seq_printf(seq, | |
1106 | " Total stat/err bytes:\trx:\t%lu\ttx:\t%lu\n", | |
1107 | rx_ebytes, tx_ebytes); | |
1108 | #endif | |
1109 | strip_seq_neighbours(seq, &strip_info->poletops, | |
1110 | "Poletops:"); | |
1111 | strip_seq_neighbours(seq, &strip_info->portables, | |
1112 | "Portables:"); | |
1113 | } | |
1114 | } | |
1115 | ||
1116 | /* | |
1117 | * This function is exports status information from the STRIP driver through | |
1118 | * the /proc file system. | |
1119 | */ | |
1120 | static int strip_seq_show(struct seq_file *seq, void *v) | |
1121 | { | |
1122 | if (v == SEQ_START_TOKEN) | |
1123 | seq_printf(seq, "strip_version: %s\n", StripVersion); | |
1124 | else | |
1125 | strip_seq_status_info(seq, (const struct strip *)v); | |
1126 | return 0; | |
1127 | } | |
1128 | ||
1129 | ||
4101dec9 | 1130 | static const struct seq_operations strip_seq_ops = { |
1da177e4 LT |
1131 | .start = strip_seq_start, |
1132 | .next = strip_seq_next, | |
1133 | .stop = strip_seq_stop, | |
1134 | .show = strip_seq_show, | |
1135 | }; | |
1136 | ||
1137 | static int strip_seq_open(struct inode *inode, struct file *file) | |
1138 | { | |
1139 | return seq_open(file, &strip_seq_ops); | |
1140 | } | |
1141 | ||
d54b1fdb | 1142 | static const struct file_operations strip_seq_fops = { |
1da177e4 LT |
1143 | .owner = THIS_MODULE, |
1144 | .open = strip_seq_open, | |
1145 | .read = seq_read, | |
1146 | .llseek = seq_lseek, | |
1147 | .release = seq_release, | |
1148 | }; | |
1149 | #endif | |
1150 | ||
1151 | ||
1152 | ||
1153 | /************************************************************************/ | |
1154 | /* Sending routines */ | |
1155 | ||
1156 | static void ResetRadio(struct strip *strip_info) | |
1157 | { | |
1158 | struct tty_struct *tty = strip_info->tty; | |
1159 | static const char init[] = "ate0q1dt**starmode\r**"; | |
1160 | StringDescriptor s = { init, sizeof(init) - 1 }; | |
1161 | ||
1162 | /* | |
1163 | * If the radio isn't working anymore, | |
1164 | * we should clear the old status information. | |
1165 | */ | |
1166 | if (strip_info->working) { | |
1167 | printk(KERN_INFO "%s: No response: Resetting radio.\n", | |
1168 | strip_info->dev->name); | |
1169 | strip_info->firmware_version.c[0] = '\0'; | |
1170 | strip_info->serial_number.c[0] = '\0'; | |
1171 | strip_info->battery_voltage.c[0] = '\0'; | |
1172 | strip_info->portables.num_nodes = 0; | |
1173 | do_gettimeofday(&strip_info->portables.timestamp); | |
1174 | strip_info->poletops.num_nodes = 0; | |
1175 | do_gettimeofday(&strip_info->poletops.timestamp); | |
1176 | } | |
1177 | ||
1178 | strip_info->pps_timer = jiffies; | |
1179 | strip_info->rx_pps_count = 0; | |
1180 | strip_info->tx_pps_count = 0; | |
1181 | strip_info->sx_pps_count = 0; | |
1182 | strip_info->rx_average_pps = 0; | |
1183 | strip_info->tx_average_pps = 0; | |
1184 | strip_info->sx_average_pps = 0; | |
1185 | ||
1186 | /* Mark radio address as unknown */ | |
1187 | *(MetricomAddress *) & strip_info->true_dev_addr = zero_address; | |
1188 | if (!strip_info->manual_dev_addr) | |
1189 | *(MetricomAddress *) strip_info->dev->dev_addr = | |
1190 | zero_address; | |
1191 | strip_info->working = FALSE; | |
1192 | strip_info->firmware_level = NoStructure; | |
1193 | strip_info->next_command = CompatibilityCommand; | |
1194 | strip_info->watchdog_doprobe = jiffies + 10 * HZ; | |
1195 | strip_info->watchdog_doreset = jiffies + 1 * HZ; | |
1196 | ||
1197 | /* If the user has selected a baud rate above 38.4 see what magic we have to do */ | |
8e8bcf16 | 1198 | if (strip_info->user_baud > 38400) { |
1da177e4 LT |
1199 | /* |
1200 | * Subtle stuff: Pay attention :-) | |
1201 | * If the serial port is currently at the user's selected (>38.4) rate, | |
1202 | * then we temporarily switch to 19.2 and issue the ATS304 command | |
1203 | * to tell the radio to switch to the user's selected rate. | |
1204 | * If the serial port is not currently at that rate, that means we just | |
1205 | * issued the ATS304 command last time through, so this time we restore | |
1206 | * the user's selected rate and issue the normal starmode reset string. | |
1207 | */ | |
8e8bcf16 | 1208 | if (strip_info->user_baud == tty_get_baud_rate(tty)) { |
1da177e4 LT |
1209 | static const char b0[] = "ate0q1s304=57600\r"; |
1210 | static const char b1[] = "ate0q1s304=115200\r"; | |
1211 | static const StringDescriptor baudstring[2] = | |
1212 | { {b0, sizeof(b0) - 1} | |
1213 | , {b1, sizeof(b1) - 1} | |
1214 | }; | |
8e8bcf16 AC |
1215 | set_baud(tty, 19200); |
1216 | if (strip_info->user_baud == 57600) | |
1da177e4 | 1217 | s = baudstring[0]; |
8e8bcf16 | 1218 | else if (strip_info->user_baud == 115200) |
1da177e4 LT |
1219 | s = baudstring[1]; |
1220 | else | |
1221 | s = baudstring[1]; /* For now */ | |
1222 | } else | |
1223 | set_baud(tty, strip_info->user_baud); | |
1224 | } | |
1225 | ||
8e8bcf16 | 1226 | tty->ops->write(tty, s.string, s.length); |
1da177e4 LT |
1227 | #ifdef EXT_COUNTERS |
1228 | strip_info->tx_ebytes += s.length; | |
1229 | #endif | |
1230 | } | |
1231 | ||
1232 | /* | |
1233 | * Called by the driver when there's room for more data. If we have | |
1234 | * more packets to send, we send them here. | |
1235 | */ | |
1236 | ||
1237 | static void strip_write_some_more(struct tty_struct *tty) | |
1238 | { | |
d2b88814 | 1239 | struct strip *strip_info = tty->disc_data; |
1da177e4 LT |
1240 | |
1241 | /* First make sure we're connected. */ | |
1242 | if (!strip_info || strip_info->magic != STRIP_MAGIC || | |
1243 | !netif_running(strip_info->dev)) | |
1244 | return; | |
1245 | ||
1246 | if (strip_info->tx_left > 0) { | |
1247 | int num_written = | |
8e8bcf16 | 1248 | tty->ops->write(tty, strip_info->tx_head, |
1da177e4 LT |
1249 | strip_info->tx_left); |
1250 | strip_info->tx_left -= num_written; | |
1251 | strip_info->tx_head += num_written; | |
1252 | #ifdef EXT_COUNTERS | |
1253 | strip_info->tx_sbytes += num_written; | |
1254 | #endif | |
1255 | } else { /* Else start transmission of another packet */ | |
1256 | ||
8a1ec21e | 1257 | clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); |
1da177e4 LT |
1258 | strip_unlock(strip_info); |
1259 | } | |
1260 | } | |
1261 | ||
1262 | static __u8 *add_checksum(__u8 * buffer, __u8 * end) | |
1263 | { | |
1264 | __u16 sum = 0; | |
1265 | __u8 *p = buffer; | |
1266 | while (p < end) | |
1267 | sum += *p++; | |
1268 | end[3] = hextable[sum & 0xF]; | |
1269 | sum >>= 4; | |
1270 | end[2] = hextable[sum & 0xF]; | |
1271 | sum >>= 4; | |
1272 | end[1] = hextable[sum & 0xF]; | |
1273 | sum >>= 4; | |
1274 | end[0] = hextable[sum & 0xF]; | |
1275 | return (end + 4); | |
1276 | } | |
1277 | ||
1278 | static unsigned char *strip_make_packet(unsigned char *buffer, | |
1279 | struct strip *strip_info, | |
1280 | struct sk_buff *skb) | |
1281 | { | |
1282 | __u8 *ptr = buffer; | |
1283 | __u8 *stuffstate = NULL; | |
1284 | STRIP_Header *header = (STRIP_Header *) skb->data; | |
1285 | MetricomAddress haddr = header->dst_addr; | |
1286 | int len = skb->len - sizeof(STRIP_Header); | |
1287 | MetricomKey key; | |
1288 | ||
1289 | /*HexDump("strip_make_packet", strip_info, skb->data, skb->data + skb->len); */ | |
1290 | ||
1291 | if (header->protocol == htons(ETH_P_IP)) | |
1292 | key = SIP0Key; | |
1293 | else if (header->protocol == htons(ETH_P_ARP)) | |
1294 | key = ARP0Key; | |
1295 | else { | |
1296 | printk(KERN_ERR | |
1297 | "%s: strip_make_packet: Unknown packet type 0x%04X\n", | |
1298 | strip_info->dev->name, ntohs(header->protocol)); | |
1299 | return (NULL); | |
1300 | } | |
1301 | ||
1302 | if (len > strip_info->mtu) { | |
1303 | printk(KERN_ERR | |
1304 | "%s: Dropping oversized transmit packet: %d bytes\n", | |
1305 | strip_info->dev->name, len); | |
1306 | return (NULL); | |
1307 | } | |
1308 | ||
1309 | /* | |
1310 | * If we're sending to ourselves, discard the packet. | |
1311 | * (Metricom radios choke if they try to send a packet to their own address.) | |
1312 | */ | |
1313 | if (!memcmp(haddr.c, strip_info->true_dev_addr.c, sizeof(haddr))) { | |
1314 | printk(KERN_ERR "%s: Dropping packet addressed to self\n", | |
1315 | strip_info->dev->name); | |
1316 | return (NULL); | |
1317 | } | |
1318 | ||
1319 | /* | |
1320 | * If this is a broadcast packet, send it to our designated Metricom | |
1321 | * 'broadcast hub' radio (First byte of address being 0xFF means broadcast) | |
1322 | */ | |
1323 | if (haddr.c[0] == 0xFF) { | |
a144ea4b | 1324 | __be32 brd = 0; |
1da177e4 LT |
1325 | struct in_device *in_dev; |
1326 | ||
1327 | rcu_read_lock(); | |
e5ed6399 | 1328 | in_dev = __in_dev_get_rcu(strip_info->dev); |
1da177e4 LT |
1329 | if (in_dev == NULL) { |
1330 | rcu_read_unlock(); | |
1331 | return NULL; | |
1332 | } | |
1333 | if (in_dev->ifa_list) | |
1334 | brd = in_dev->ifa_list->ifa_broadcast; | |
1335 | rcu_read_unlock(); | |
1336 | ||
1337 | /* arp_query returns 1 if it succeeds in looking up the address, 0 if it fails */ | |
1338 | if (!arp_query(haddr.c, brd, strip_info->dev)) { | |
1339 | printk(KERN_ERR | |
1340 | "%s: Unable to send packet (no broadcast hub configured)\n", | |
1341 | strip_info->dev->name); | |
1342 | return (NULL); | |
1343 | } | |
1344 | /* | |
1345 | * If we are the broadcast hub, don't bother sending to ourselves. | |
1346 | * (Metricom radios choke if they try to send a packet to their own address.) | |
1347 | */ | |
1348 | if (!memcmp | |
1349 | (haddr.c, strip_info->true_dev_addr.c, sizeof(haddr))) | |
1350 | return (NULL); | |
1351 | } | |
1352 | ||
1353 | *ptr++ = 0x0D; | |
1354 | *ptr++ = '*'; | |
1355 | *ptr++ = hextable[haddr.c[2] >> 4]; | |
1356 | *ptr++ = hextable[haddr.c[2] & 0xF]; | |
1357 | *ptr++ = hextable[haddr.c[3] >> 4]; | |
1358 | *ptr++ = hextable[haddr.c[3] & 0xF]; | |
1359 | *ptr++ = '-'; | |
1360 | *ptr++ = hextable[haddr.c[4] >> 4]; | |
1361 | *ptr++ = hextable[haddr.c[4] & 0xF]; | |
1362 | *ptr++ = hextable[haddr.c[5] >> 4]; | |
1363 | *ptr++ = hextable[haddr.c[5] & 0xF]; | |
1364 | *ptr++ = '*'; | |
1365 | *ptr++ = key.c[0]; | |
1366 | *ptr++ = key.c[1]; | |
1367 | *ptr++ = key.c[2]; | |
1368 | *ptr++ = key.c[3]; | |
1369 | ||
1370 | ptr = | |
1371 | StuffData(skb->data + sizeof(STRIP_Header), len, ptr, | |
1372 | &stuffstate); | |
1373 | ||
1374 | if (strip_info->firmware_level >= ChecksummedMessages) | |
1375 | ptr = add_checksum(buffer + 1, ptr); | |
1376 | ||
1377 | *ptr++ = 0x0D; | |
1378 | return (ptr); | |
1379 | } | |
1380 | ||
1381 | static void strip_send(struct strip *strip_info, struct sk_buff *skb) | |
1382 | { | |
1383 | MetricomAddress haddr; | |
1384 | unsigned char *ptr = strip_info->tx_buff; | |
1385 | int doreset = (long) jiffies - strip_info->watchdog_doreset >= 0; | |
1386 | int doprobe = (long) jiffies - strip_info->watchdog_doprobe >= 0 | |
1387 | && !doreset; | |
a144ea4b | 1388 | __be32 addr, brd; |
1da177e4 LT |
1389 | |
1390 | /* | |
1391 | * 1. If we have a packet, encapsulate it and put it in the buffer | |
1392 | */ | |
1393 | if (skb) { | |
1394 | char *newptr = strip_make_packet(ptr, strip_info, skb); | |
1395 | strip_info->tx_pps_count++; | |
1396 | if (!newptr) | |
1397 | strip_info->tx_dropped++; | |
1398 | else { | |
1399 | ptr = newptr; | |
1400 | strip_info->sx_pps_count++; | |
1401 | strip_info->tx_packets++; /* Count another successful packet */ | |
1402 | #ifdef EXT_COUNTERS | |
1403 | strip_info->tx_bytes += skb->len; | |
1404 | strip_info->tx_rbytes += ptr - strip_info->tx_buff; | |
1405 | #endif | |
1406 | /*DumpData("Sending:", strip_info, strip_info->tx_buff, ptr); */ | |
1407 | /*HexDump("Sending", strip_info, strip_info->tx_buff, ptr); */ | |
1408 | } | |
1409 | } | |
1410 | ||
1411 | /* | |
1412 | * 2. If it is time for another tickle, tack it on, after the packet | |
1413 | */ | |
1414 | if (doprobe) { | |
1415 | StringDescriptor ts = CommandString[strip_info->next_command]; | |
1416 | #if TICKLE_TIMERS | |
1417 | { | |
1418 | struct timeval tv; | |
1419 | do_gettimeofday(&tv); | |
1420 | printk(KERN_INFO "**** Sending tickle string %d at %02d.%06d\n", | |
1421 | strip_info->next_command, tv.tv_sec % 100, | |
1422 | tv.tv_usec); | |
1423 | } | |
1424 | #endif | |
1425 | if (ptr == strip_info->tx_buff) | |
1426 | *ptr++ = 0x0D; | |
1427 | ||
1428 | *ptr++ = '*'; /* First send "**" to provoke an error message */ | |
1429 | *ptr++ = '*'; | |
1430 | ||
1431 | /* Then add the command */ | |
1432 | memcpy(ptr, ts.string, ts.length); | |
1433 | ||
1434 | /* Add a checksum ? */ | |
1435 | if (strip_info->firmware_level < ChecksummedMessages) | |
1436 | ptr += ts.length; | |
1437 | else | |
1438 | ptr = add_checksum(ptr, ptr + ts.length); | |
1439 | ||
1440 | *ptr++ = 0x0D; /* Terminate the command with a <CR> */ | |
1441 | ||
1442 | /* Cycle to next periodic command? */ | |
1443 | if (strip_info->firmware_level >= StructuredMessages) | |
1444 | if (++strip_info->next_command >= | |
1445 | ARRAY_SIZE(CommandString)) | |
1446 | strip_info->next_command = 0; | |
1447 | #ifdef EXT_COUNTERS | |
1448 | strip_info->tx_ebytes += ts.length; | |
1449 | #endif | |
1450 | strip_info->watchdog_doprobe = jiffies + 10 * HZ; | |
1451 | strip_info->watchdog_doreset = jiffies + 1 * HZ; | |
1452 | /*printk(KERN_INFO "%s: Routine radio test.\n", strip_info->dev->name); */ | |
1453 | } | |
1454 | ||
1455 | /* | |
1456 | * 3. Set up the strip_info ready to send the data (if any). | |
1457 | */ | |
1458 | strip_info->tx_head = strip_info->tx_buff; | |
1459 | strip_info->tx_left = ptr - strip_info->tx_buff; | |
8a1ec21e | 1460 | set_bit(TTY_DO_WRITE_WAKEUP, &strip_info->tty->flags); |
1da177e4 LT |
1461 | /* |
1462 | * 4. Debugging check to make sure we're not overflowing the buffer. | |
1463 | */ | |
1464 | if (strip_info->tx_size - strip_info->tx_left < 20) | |
1465 | printk(KERN_ERR "%s: Sending%5d bytes;%5d bytes free.\n", | |
1466 | strip_info->dev->name, strip_info->tx_left, | |
1467 | strip_info->tx_size - strip_info->tx_left); | |
1468 | ||
1469 | /* | |
1470 | * 5. If watchdog has expired, reset the radio. Note: if there's data waiting in | |
1471 | * the buffer, strip_write_some_more will send it after the reset has finished | |
1472 | */ | |
1473 | if (doreset) { | |
1474 | ResetRadio(strip_info); | |
1475 | return; | |
1476 | } | |
1477 | ||
1478 | if (1) { | |
1479 | struct in_device *in_dev; | |
1480 | ||
1481 | brd = addr = 0; | |
1482 | rcu_read_lock(); | |
e5ed6399 | 1483 | in_dev = __in_dev_get_rcu(strip_info->dev); |
1da177e4 LT |
1484 | if (in_dev) { |
1485 | if (in_dev->ifa_list) { | |
1486 | brd = in_dev->ifa_list->ifa_broadcast; | |
1487 | addr = in_dev->ifa_list->ifa_local; | |
1488 | } | |
1489 | } | |
1490 | rcu_read_unlock(); | |
1491 | } | |
1492 | ||
1493 | ||
1494 | /* | |
1495 | * 6. If it is time for a periodic ARP, queue one up to be sent. | |
1496 | * We only do this if: | |
1497 | * 1. The radio is working | |
1498 | * 2. It's time to send another periodic ARP | |
1499 | * 3. We really know what our address is (and it is not manually set to zero) | |
1500 | * 4. We have a designated broadcast address configured | |
1501 | * If we queue up an ARP packet when we don't have a designated broadcast | |
1502 | * address configured, then the packet will just have to be discarded in | |
1503 | * strip_make_packet. This is not fatal, but it causes misleading information | |
1504 | * to be displayed in tcpdump. tcpdump will report that periodic APRs are | |
1505 | * being sent, when in fact they are not, because they are all being dropped | |
1506 | * in the strip_make_packet routine. | |
1507 | */ | |
1508 | if (strip_info->working | |
1509 | && (long) jiffies - strip_info->gratuitous_arp >= 0 | |
1510 | && memcmp(strip_info->dev->dev_addr, zero_address.c, | |
1511 | sizeof(zero_address)) | |
1512 | && arp_query(haddr.c, brd, strip_info->dev)) { | |
1513 | /*printk(KERN_INFO "%s: Sending gratuitous ARP with interval %ld\n", | |
1514 | strip_info->dev->name, strip_info->arp_interval / HZ); */ | |
1515 | strip_info->gratuitous_arp = | |
1516 | jiffies + strip_info->arp_interval; | |
1517 | strip_info->arp_interval *= 2; | |
1518 | if (strip_info->arp_interval > MaxARPInterval) | |
1519 | strip_info->arp_interval = MaxARPInterval; | |
1520 | if (addr) | |
1521 | arp_send(ARPOP_REPLY, ETH_P_ARP, addr, /* Target address of ARP packet is our address */ | |
1522 | strip_info->dev, /* Device to send packet on */ | |
1523 | addr, /* Source IP address this ARP packet comes from */ | |
1524 | NULL, /* Destination HW address is NULL (broadcast it) */ | |
1525 | strip_info->dev->dev_addr, /* Source HW address is our HW address */ | |
1526 | strip_info->dev->dev_addr); /* Target HW address is our HW address (redundant) */ | |
1527 | } | |
1528 | ||
1529 | /* | |
1530 | * 7. All ready. Start the transmission | |
1531 | */ | |
1532 | strip_write_some_more(strip_info->tty); | |
1533 | } | |
1534 | ||
1535 | /* Encapsulate a datagram and kick it into a TTY queue. */ | |
1536 | static int strip_xmit(struct sk_buff *skb, struct net_device *dev) | |
1537 | { | |
1538 | struct strip *strip_info = netdev_priv(dev); | |
1539 | ||
1540 | if (!netif_running(dev)) { | |
1541 | printk(KERN_ERR "%s: xmit call when iface is down\n", | |
1542 | dev->name); | |
5b548140 | 1543 | return NETDEV_TX_BUSY; |
1da177e4 LT |
1544 | } |
1545 | ||
1546 | netif_stop_queue(dev); | |
1547 | ||
1548 | del_timer(&strip_info->idle_timer); | |
1549 | ||
1550 | ||
ff5688ae | 1551 | if (time_after(jiffies, strip_info->pps_timer + HZ)) { |
1da177e4 LT |
1552 | unsigned long t = jiffies - strip_info->pps_timer; |
1553 | unsigned long rx_pps_count = (strip_info->rx_pps_count * HZ * 8 + t / 2) / t; | |
1554 | unsigned long tx_pps_count = (strip_info->tx_pps_count * HZ * 8 + t / 2) / t; | |
1555 | unsigned long sx_pps_count = (strip_info->sx_pps_count * HZ * 8 + t / 2) / t; | |
1556 | ||
1557 | strip_info->pps_timer = jiffies; | |
1558 | strip_info->rx_pps_count = 0; | |
1559 | strip_info->tx_pps_count = 0; | |
1560 | strip_info->sx_pps_count = 0; | |
1561 | ||
1562 | strip_info->rx_average_pps = (strip_info->rx_average_pps + rx_pps_count + 1) / 2; | |
1563 | strip_info->tx_average_pps = (strip_info->tx_average_pps + tx_pps_count + 1) / 2; | |
1564 | strip_info->sx_average_pps = (strip_info->sx_average_pps + sx_pps_count + 1) / 2; | |
1565 | ||
1566 | if (rx_pps_count / 8 >= 10) | |
1567 | printk(KERN_INFO "%s: WARNING: Receiving %ld packets per second.\n", | |
1568 | strip_info->dev->name, rx_pps_count / 8); | |
1569 | if (tx_pps_count / 8 >= 10) | |
1570 | printk(KERN_INFO "%s: WARNING: Tx %ld packets per second.\n", | |
1571 | strip_info->dev->name, tx_pps_count / 8); | |
1572 | if (sx_pps_count / 8 >= 10) | |
1573 | printk(KERN_INFO "%s: WARNING: Sending %ld packets per second.\n", | |
1574 | strip_info->dev->name, sx_pps_count / 8); | |
1575 | } | |
1576 | ||
1577 | spin_lock_bh(&strip_lock); | |
1578 | ||
1579 | strip_send(strip_info, skb); | |
1580 | ||
1581 | spin_unlock_bh(&strip_lock); | |
1582 | ||
1583 | if (skb) | |
1584 | dev_kfree_skb(skb); | |
1585 | return 0; | |
1586 | } | |
1587 | ||
1588 | /* | |
1589 | * IdleTask periodically calls strip_xmit, so even when we have no IP packets | |
1590 | * to send for an extended period of time, the watchdog processing still gets | |
1591 | * done to ensure that the radio stays in Starmode | |
1592 | */ | |
1593 | ||
1594 | static void strip_IdleTask(unsigned long parameter) | |
1595 | { | |
1596 | strip_xmit(NULL, (struct net_device *) parameter); | |
1597 | } | |
1598 | ||
1599 | /* | |
1600 | * Create the MAC header for an arbitrary protocol layer | |
1601 | * | |
1602 | * saddr!=NULL means use this specific address (n/a for Metricom) | |
1603 | * saddr==NULL means use default device source address | |
1604 | * daddr!=NULL means use this destination address | |
1605 | * daddr==NULL means leave destination address alone | |
1606 | * (e.g. unresolved arp -- kernel will call | |
1607 | * rebuild_header later to fill in the address) | |
1608 | */ | |
1609 | ||
1610 | static int strip_header(struct sk_buff *skb, struct net_device *dev, | |
3b04ddde SH |
1611 | unsigned short type, const void *daddr, |
1612 | const void *saddr, unsigned len) | |
1da177e4 LT |
1613 | { |
1614 | struct strip *strip_info = netdev_priv(dev); | |
1615 | STRIP_Header *header = (STRIP_Header *) skb_push(skb, sizeof(STRIP_Header)); | |
1616 | ||
1617 | /*printk(KERN_INFO "%s: strip_header 0x%04X %s\n", dev->name, type, | |
1618 | type == ETH_P_IP ? "IP" : type == ETH_P_ARP ? "ARP" : ""); */ | |
1619 | ||
1620 | header->src_addr = strip_info->true_dev_addr; | |
1621 | header->protocol = htons(type); | |
1622 | ||
1623 | /*HexDump("strip_header", netdev_priv(dev), skb->data, skb->data + skb->len); */ | |
1624 | ||
1625 | if (!daddr) | |
1626 | return (-dev->hard_header_len); | |
1627 | ||
1628 | header->dst_addr = *(MetricomAddress *) daddr; | |
1629 | return (dev->hard_header_len); | |
1630 | } | |
1631 | ||
1632 | /* | |
1633 | * Rebuild the MAC header. This is called after an ARP | |
1634 | * (or in future other address resolution) has completed on this | |
1635 | * sk_buff. We now let ARP fill in the other fields. | |
1636 | * I think this should return zero if packet is ready to send, | |
1637 | * or non-zero if it needs more time to do an address lookup | |
1638 | */ | |
1639 | ||
1640 | static int strip_rebuild_header(struct sk_buff *skb) | |
1641 | { | |
1642 | #ifdef CONFIG_INET | |
1643 | STRIP_Header *header = (STRIP_Header *) skb->data; | |
1644 | ||
1645 | /* Arp find returns zero if if knows the address, */ | |
1646 | /* or if it doesn't know the address it sends an ARP packet and returns non-zero */ | |
1647 | return arp_find(header->dst_addr.c, skb) ? 1 : 0; | |
1648 | #else | |
1649 | return 0; | |
1650 | #endif | |
1651 | } | |
1652 | ||
1653 | ||
1654 | /************************************************************************/ | |
1655 | /* Receiving routines */ | |
1656 | ||
1da177e4 LT |
1657 | /* |
1658 | * This function parses the response to the ATS300? command, | |
1659 | * extracting the radio version and serial number. | |
1660 | */ | |
1661 | static void get_radio_version(struct strip *strip_info, __u8 * ptr, __u8 * end) | |
1662 | { | |
1663 | __u8 *p, *value_begin, *value_end; | |
1664 | int len; | |
1665 | ||
1666 | /* Determine the beginning of the second line of the payload */ | |
1667 | p = ptr; | |
1668 | while (p < end && *p != 10) | |
1669 | p++; | |
1670 | if (p >= end) | |
1671 | return; | |
1672 | p++; | |
1673 | value_begin = p; | |
1674 | ||
1675 | /* Determine the end of line */ | |
1676 | while (p < end && *p != 10) | |
1677 | p++; | |
1678 | if (p >= end) | |
1679 | return; | |
1680 | value_end = p; | |
1681 | p++; | |
1682 | ||
1683 | len = value_end - value_begin; | |
1684 | len = min_t(int, len, sizeof(FirmwareVersion) - 1); | |
1685 | if (strip_info->firmware_version.c[0] == 0) | |
1686 | printk(KERN_INFO "%s: Radio Firmware: %.*s\n", | |
1687 | strip_info->dev->name, len, value_begin); | |
1688 | sprintf(strip_info->firmware_version.c, "%.*s", len, value_begin); | |
1689 | ||
1690 | /* Look for the first colon */ | |
1691 | while (p < end && *p != ':') | |
1692 | p++; | |
1693 | if (p >= end) | |
1694 | return; | |
1695 | /* Skip over the space */ | |
1696 | p += 2; | |
1697 | len = sizeof(SerialNumber) - 1; | |
1698 | if (p + len <= end) { | |
1699 | sprintf(strip_info->serial_number.c, "%.*s", len, p); | |
1700 | } else { | |
1701 | printk(KERN_DEBUG | |
1702 | "STRIP: radio serial number shorter (%zd) than expected (%d)\n", | |
1703 | end - p, len); | |
1704 | } | |
1705 | } | |
1706 | ||
1707 | /* | |
1708 | * This function parses the response to the ATS325? command, | |
1709 | * extracting the radio battery voltage. | |
1710 | */ | |
1711 | static void get_radio_voltage(struct strip *strip_info, __u8 * ptr, __u8 * end) | |
1712 | { | |
1713 | int len; | |
1714 | ||
1715 | len = sizeof(BatteryVoltage) - 1; | |
1716 | if (ptr + len <= end) { | |
1717 | sprintf(strip_info->battery_voltage.c, "%.*s", len, ptr); | |
1718 | } else { | |
1719 | printk(KERN_DEBUG | |
1720 | "STRIP: radio voltage string shorter (%zd) than expected (%d)\n", | |
1721 | end - ptr, len); | |
1722 | } | |
1723 | } | |
1724 | ||
1725 | /* | |
1726 | * This function parses the responses to the AT~LA and ATS311 commands, | |
1727 | * which list the radio's neighbours. | |
1728 | */ | |
1729 | static void get_radio_neighbours(MetricomNodeTable * table, __u8 * ptr, __u8 * end) | |
1730 | { | |
1731 | table->num_nodes = 0; | |
1732 | while (ptr < end && table->num_nodes < NODE_TABLE_SIZE) { | |
1733 | MetricomNode *node = &table->node[table->num_nodes++]; | |
1734 | char *dst = node->c, *limit = dst + sizeof(*node) - 1; | |
1735 | while (ptr < end && *ptr <= 32) | |
1736 | ptr++; | |
1737 | while (ptr < end && dst < limit && *ptr != 10) | |
1738 | *dst++ = *ptr++; | |
1739 | *dst++ = 0; | |
1740 | while (ptr < end && ptr[-1] != 10) | |
1741 | ptr++; | |
1742 | } | |
1743 | do_gettimeofday(&table->timestamp); | |
1744 | } | |
1745 | ||
1746 | static int get_radio_address(struct strip *strip_info, __u8 * p) | |
1747 | { | |
1748 | MetricomAddress addr; | |
1749 | ||
1750 | if (string_to_radio_address(&addr, p)) | |
1751 | return (1); | |
1752 | ||
1753 | /* See if our radio address has changed */ | |
1754 | if (memcmp(strip_info->true_dev_addr.c, addr.c, sizeof(addr))) { | |
1755 | MetricomAddressString addr_string; | |
1756 | radio_address_to_string(&addr, &addr_string); | |
1757 | printk(KERN_INFO "%s: Radio address = %s\n", | |
1758 | strip_info->dev->name, addr_string.c); | |
1759 | strip_info->true_dev_addr = addr; | |
1760 | if (!strip_info->manual_dev_addr) | |
1761 | *(MetricomAddress *) strip_info->dev->dev_addr = | |
1762 | addr; | |
1763 | /* Give the radio a few seconds to get its head straight, then send an arp */ | |
1764 | strip_info->gratuitous_arp = jiffies + 15 * HZ; | |
1765 | strip_info->arp_interval = 1 * HZ; | |
1766 | } | |
1767 | return (0); | |
1768 | } | |
1769 | ||
1770 | static int verify_checksum(struct strip *strip_info) | |
1771 | { | |
1772 | __u8 *p = strip_info->sx_buff; | |
1773 | __u8 *end = strip_info->sx_buff + strip_info->sx_count - 4; | |
1774 | u_short sum = | |
1775 | (READHEX16(end[0]) << 12) | (READHEX16(end[1]) << 8) | | |
1776 | (READHEX16(end[2]) << 4) | (READHEX16(end[3])); | |
1777 | while (p < end) | |
1778 | sum -= *p++; | |
1779 | if (sum == 0 && strip_info->firmware_level == StructuredMessages) { | |
1780 | strip_info->firmware_level = ChecksummedMessages; | |
1781 | printk(KERN_INFO "%s: Radio provides message checksums\n", | |
1782 | strip_info->dev->name); | |
1783 | } | |
1784 | return (sum == 0); | |
1785 | } | |
1786 | ||
1787 | static void RecvErr(char *msg, struct strip *strip_info) | |
1788 | { | |
1789 | __u8 *ptr = strip_info->sx_buff; | |
1790 | __u8 *end = strip_info->sx_buff + strip_info->sx_count; | |
1791 | DumpData(msg, strip_info, ptr, end); | |
1792 | strip_info->rx_errors++; | |
1793 | } | |
1794 | ||
1795 | static void RecvErr_Message(struct strip *strip_info, __u8 * sendername, | |
1796 | const __u8 * msg, u_long len) | |
1797 | { | |
1798 | if (has_prefix(msg, len, "001")) { /* Not in StarMode! */ | |
1799 | RecvErr("Error Msg:", strip_info); | |
1800 | printk(KERN_INFO "%s: Radio %s is not in StarMode\n", | |
1801 | strip_info->dev->name, sendername); | |
1802 | } | |
1803 | ||
1804 | else if (has_prefix(msg, len, "002")) { /* Remap handle */ | |
1805 | /* We ignore "Remap handle" messages for now */ | |
1806 | } | |
1807 | ||
1808 | else if (has_prefix(msg, len, "003")) { /* Can't resolve name */ | |
1809 | RecvErr("Error Msg:", strip_info); | |
1810 | printk(KERN_INFO "%s: Destination radio name is unknown\n", | |
1811 | strip_info->dev->name); | |
1812 | } | |
1813 | ||
1814 | else if (has_prefix(msg, len, "004")) { /* Name too small or missing */ | |
1815 | strip_info->watchdog_doreset = jiffies + LongTime; | |
1816 | #if TICKLE_TIMERS | |
1817 | { | |
1818 | struct timeval tv; | |
1819 | do_gettimeofday(&tv); | |
1820 | printk(KERN_INFO | |
1821 | "**** Got ERR_004 response at %02d.%06d\n", | |
1822 | tv.tv_sec % 100, tv.tv_usec); | |
1823 | } | |
1824 | #endif | |
1825 | if (!strip_info->working) { | |
1826 | strip_info->working = TRUE; | |
1827 | printk(KERN_INFO "%s: Radio now in starmode\n", | |
1828 | strip_info->dev->name); | |
1829 | /* | |
1830 | * If the radio has just entered a working state, we should do our first | |
1831 | * probe ASAP, so that we find out our radio address etc. without delay. | |
1832 | */ | |
1833 | strip_info->watchdog_doprobe = jiffies; | |
1834 | } | |
1835 | if (strip_info->firmware_level == NoStructure && sendername) { | |
1836 | strip_info->firmware_level = StructuredMessages; | |
1837 | strip_info->next_command = 0; /* Try to enable checksums ASAP */ | |
1838 | printk(KERN_INFO | |
1839 | "%s: Radio provides structured messages\n", | |
1840 | strip_info->dev->name); | |
1841 | } | |
1842 | if (strip_info->firmware_level >= StructuredMessages) { | |
1843 | /* | |
1844 | * If this message has a valid checksum on the end, then the call to verify_checksum | |
1845 | * will elevate the firmware_level to ChecksummedMessages for us. (The actual return | |
1846 | * code from verify_checksum is ignored here.) | |
1847 | */ | |
1848 | verify_checksum(strip_info); | |
1849 | /* | |
1850 | * If the radio has structured messages but we don't yet have all our information about it, | |
1851 | * we should do probes without delay, until we have gathered all the information | |
1852 | */ | |
1853 | if (!GOT_ALL_RADIO_INFO(strip_info)) | |
1854 | strip_info->watchdog_doprobe = jiffies; | |
1855 | } | |
1856 | } | |
1857 | ||
1858 | else if (has_prefix(msg, len, "005")) /* Bad count specification */ | |
1859 | RecvErr("Error Msg:", strip_info); | |
1860 | ||
1861 | else if (has_prefix(msg, len, "006")) /* Header too big */ | |
1862 | RecvErr("Error Msg:", strip_info); | |
1863 | ||
1864 | else if (has_prefix(msg, len, "007")) { /* Body too big */ | |
1865 | RecvErr("Error Msg:", strip_info); | |
1866 | printk(KERN_ERR | |
1867 | "%s: Error! Packet size too big for radio.\n", | |
1868 | strip_info->dev->name); | |
1869 | } | |
1870 | ||
1871 | else if (has_prefix(msg, len, "008")) { /* Bad character in name */ | |
1872 | RecvErr("Error Msg:", strip_info); | |
1873 | printk(KERN_ERR | |
1874 | "%s: Radio name contains illegal character\n", | |
1875 | strip_info->dev->name); | |
1876 | } | |
1877 | ||
1878 | else if (has_prefix(msg, len, "009")) /* No count or line terminator */ | |
1879 | RecvErr("Error Msg:", strip_info); | |
1880 | ||
1881 | else if (has_prefix(msg, len, "010")) /* Invalid checksum */ | |
1882 | RecvErr("Error Msg:", strip_info); | |
1883 | ||
1884 | else if (has_prefix(msg, len, "011")) /* Checksum didn't match */ | |
1885 | RecvErr("Error Msg:", strip_info); | |
1886 | ||
1887 | else if (has_prefix(msg, len, "012")) /* Failed to transmit packet */ | |
1888 | RecvErr("Error Msg:", strip_info); | |
1889 | ||
1890 | else | |
1891 | RecvErr("Error Msg:", strip_info); | |
1892 | } | |
1893 | ||
1894 | static void process_AT_response(struct strip *strip_info, __u8 * ptr, | |
1895 | __u8 * end) | |
1896 | { | |
1897 | u_long len; | |
1898 | __u8 *p = ptr; | |
1899 | while (p < end && p[-1] != 10) | |
1900 | p++; /* Skip past first newline character */ | |
1901 | /* Now ptr points to the AT command, and p points to the text of the response. */ | |
1902 | len = p - ptr; | |
1903 | ||
1904 | #if TICKLE_TIMERS | |
1905 | { | |
1906 | struct timeval tv; | |
1907 | do_gettimeofday(&tv); | |
1908 | printk(KERN_INFO "**** Got AT response %.7s at %02d.%06d\n", | |
1909 | ptr, tv.tv_sec % 100, tv.tv_usec); | |
1910 | } | |
1911 | #endif | |
1912 | ||
1913 | if (has_prefix(ptr, len, "ATS300?")) | |
1914 | get_radio_version(strip_info, p, end); | |
1915 | else if (has_prefix(ptr, len, "ATS305?")) | |
1916 | get_radio_address(strip_info, p); | |
1917 | else if (has_prefix(ptr, len, "ATS311?")) | |
1918 | get_radio_neighbours(&strip_info->poletops, p, end); | |
1919 | else if (has_prefix(ptr, len, "ATS319=7")) | |
1920 | verify_checksum(strip_info); | |
1921 | else if (has_prefix(ptr, len, "ATS325?")) | |
1922 | get_radio_voltage(strip_info, p, end); | |
1923 | else if (has_prefix(ptr, len, "AT~LA")) | |
1924 | get_radio_neighbours(&strip_info->portables, p, end); | |
1925 | else | |
1926 | RecvErr("Unknown AT Response:", strip_info); | |
1927 | } | |
1928 | ||
1929 | static void process_ACK(struct strip *strip_info, __u8 * ptr, __u8 * end) | |
1930 | { | |
1931 | /* Currently we don't do anything with ACKs from the radio */ | |
1932 | } | |
1933 | ||
1934 | static void process_Info(struct strip *strip_info, __u8 * ptr, __u8 * end) | |
1935 | { | |
1936 | if (ptr + 16 > end) | |
1937 | RecvErr("Bad Info Msg:", strip_info); | |
1938 | } | |
1939 | ||
1940 | static struct net_device *get_strip_dev(struct strip *strip_info) | |
1941 | { | |
1942 | /* If our hardware address is *manually set* to zero, and we know our */ | |
1943 | /* real radio hardware address, try to find another strip device that has been */ | |
1944 | /* manually set to that address that we can 'transfer ownership' of this packet to */ | |
1945 | if (strip_info->manual_dev_addr && | |
1946 | !memcmp(strip_info->dev->dev_addr, zero_address.c, | |
1947 | sizeof(zero_address)) | |
1948 | && memcmp(&strip_info->true_dev_addr, zero_address.c, | |
1949 | sizeof(zero_address))) { | |
1950 | struct net_device *dev; | |
1951 | read_lock_bh(&dev_base_lock); | |
881d966b | 1952 | for_each_netdev(&init_net, dev) { |
1da177e4 LT |
1953 | if (dev->type == strip_info->dev->type && |
1954 | !memcmp(dev->dev_addr, | |
1955 | &strip_info->true_dev_addr, | |
1956 | sizeof(MetricomAddress))) { | |
1957 | printk(KERN_INFO | |
1958 | "%s: Transferred packet ownership to %s.\n", | |
1959 | strip_info->dev->name, dev->name); | |
1960 | read_unlock_bh(&dev_base_lock); | |
1961 | return (dev); | |
1962 | } | |
1da177e4 LT |
1963 | } |
1964 | read_unlock_bh(&dev_base_lock); | |
1965 | } | |
1966 | return (strip_info->dev); | |
1967 | } | |
1968 | ||
1969 | /* | |
1970 | * Send one completely decapsulated datagram to the next layer. | |
1971 | */ | |
1972 | ||
1973 | static void deliver_packet(struct strip *strip_info, STRIP_Header * header, | |
1974 | __u16 packetlen) | |
1975 | { | |
1976 | struct sk_buff *skb = dev_alloc_skb(sizeof(STRIP_Header) + packetlen); | |
1977 | if (!skb) { | |
1978 | printk(KERN_ERR "%s: memory squeeze, dropping packet.\n", | |
1979 | strip_info->dev->name); | |
1980 | strip_info->rx_dropped++; | |
1981 | } else { | |
1982 | memcpy(skb_put(skb, sizeof(STRIP_Header)), header, | |
1983 | sizeof(STRIP_Header)); | |
1984 | memcpy(skb_put(skb, packetlen), strip_info->rx_buff, | |
1985 | packetlen); | |
1986 | skb->dev = get_strip_dev(strip_info); | |
1987 | skb->protocol = header->protocol; | |
459a98ed | 1988 | skb_reset_mac_header(skb); |
1da177e4 LT |
1989 | |
1990 | /* Having put a fake header on the front of the sk_buff for the */ | |
1991 | /* benefit of tools like tcpdump, skb_pull now 'consumes' that */ | |
1992 | /* fake header before we hand the packet up to the next layer. */ | |
1993 | skb_pull(skb, sizeof(STRIP_Header)); | |
1994 | ||
1995 | /* Finally, hand the packet up to the next layer (e.g. IP or ARP, etc.) */ | |
1996 | strip_info->rx_packets++; | |
1997 | strip_info->rx_pps_count++; | |
1998 | #ifdef EXT_COUNTERS | |
1999 | strip_info->rx_bytes += packetlen; | |
2000 | #endif | |
1da177e4 LT |
2001 | netif_rx(skb); |
2002 | } | |
2003 | } | |
2004 | ||
2005 | static void process_IP_packet(struct strip *strip_info, | |
2006 | STRIP_Header * header, __u8 * ptr, | |
2007 | __u8 * end) | |
2008 | { | |
2009 | __u16 packetlen; | |
2010 | ||
2011 | /* Decode start of the IP packet header */ | |
2012 | ptr = UnStuffData(ptr, end, strip_info->rx_buff, 4); | |
2013 | if (!ptr) { | |
2014 | RecvErr("IP Packet too short", strip_info); | |
2015 | return; | |
2016 | } | |
2017 | ||
2018 | packetlen = ((__u16) strip_info->rx_buff[2] << 8) | strip_info->rx_buff[3]; | |
2019 | ||
2020 | if (packetlen > MAX_RECV_MTU) { | |
2021 | printk(KERN_INFO "%s: Dropping oversized received IP packet: %d bytes\n", | |
2022 | strip_info->dev->name, packetlen); | |
2023 | strip_info->rx_dropped++; | |
2024 | return; | |
2025 | } | |
2026 | ||
2027 | /*printk(KERN_INFO "%s: Got %d byte IP packet\n", strip_info->dev->name, packetlen); */ | |
2028 | ||
2029 | /* Decode remainder of the IP packet */ | |
2030 | ptr = | |
2031 | UnStuffData(ptr, end, strip_info->rx_buff + 4, packetlen - 4); | |
2032 | if (!ptr) { | |
2033 | RecvErr("IP Packet too short", strip_info); | |
2034 | return; | |
2035 | } | |
2036 | ||
2037 | if (ptr < end) { | |
2038 | RecvErr("IP Packet too long", strip_info); | |
2039 | return; | |
2040 | } | |
2041 | ||
2042 | header->protocol = htons(ETH_P_IP); | |
2043 | ||
2044 | deliver_packet(strip_info, header, packetlen); | |
2045 | } | |
2046 | ||
2047 | static void process_ARP_packet(struct strip *strip_info, | |
2048 | STRIP_Header * header, __u8 * ptr, | |
2049 | __u8 * end) | |
2050 | { | |
2051 | __u16 packetlen; | |
2052 | struct arphdr *arphdr = (struct arphdr *) strip_info->rx_buff; | |
2053 | ||
2054 | /* Decode start of the ARP packet */ | |
2055 | ptr = UnStuffData(ptr, end, strip_info->rx_buff, 8); | |
2056 | if (!ptr) { | |
2057 | RecvErr("ARP Packet too short", strip_info); | |
2058 | return; | |
2059 | } | |
2060 | ||
2061 | packetlen = 8 + (arphdr->ar_hln + arphdr->ar_pln) * 2; | |
2062 | ||
2063 | if (packetlen > MAX_RECV_MTU) { | |
2064 | printk(KERN_INFO | |
2065 | "%s: Dropping oversized received ARP packet: %d bytes\n", | |
2066 | strip_info->dev->name, packetlen); | |
2067 | strip_info->rx_dropped++; | |
2068 | return; | |
2069 | } | |
2070 | ||
2071 | /*printk(KERN_INFO "%s: Got %d byte ARP %s\n", | |
2072 | strip_info->dev->name, packetlen, | |
2073 | ntohs(arphdr->ar_op) == ARPOP_REQUEST ? "request" : "reply"); */ | |
2074 | ||
2075 | /* Decode remainder of the ARP packet */ | |
2076 | ptr = | |
2077 | UnStuffData(ptr, end, strip_info->rx_buff + 8, packetlen - 8); | |
2078 | if (!ptr) { | |
2079 | RecvErr("ARP Packet too short", strip_info); | |
2080 | return; | |
2081 | } | |
2082 | ||
2083 | if (ptr < end) { | |
2084 | RecvErr("ARP Packet too long", strip_info); | |
2085 | return; | |
2086 | } | |
2087 | ||
2088 | header->protocol = htons(ETH_P_ARP); | |
2089 | ||
2090 | deliver_packet(strip_info, header, packetlen); | |
2091 | } | |
2092 | ||
2093 | /* | |
2094 | * process_text_message processes a <CR>-terminated block of data received | |
2095 | * from the radio that doesn't begin with a '*' character. All normal | |
2096 | * Starmode communication messages with the radio begin with a '*', | |
2097 | * so any text that does not indicates a serial port error, a radio that | |
2098 | * is in Hayes command mode instead of Starmode, or a radio with really | |
2099 | * old firmware that doesn't frame its Starmode responses properly. | |
2100 | */ | |
2101 | static void process_text_message(struct strip *strip_info) | |
2102 | { | |
2103 | __u8 *msg = strip_info->sx_buff; | |
2104 | int len = strip_info->sx_count; | |
2105 | ||
2106 | /* Check for anything that looks like it might be our radio name */ | |
2107 | /* (This is here for backwards compatibility with old firmware) */ | |
2108 | if (len == 9 && get_radio_address(strip_info, msg) == 0) | |
2109 | return; | |
2110 | ||
2111 | if (text_equal(msg, len, "OK")) | |
2112 | return; /* Ignore 'OK' responses from prior commands */ | |
2113 | if (text_equal(msg, len, "ERROR")) | |
2114 | return; /* Ignore 'ERROR' messages */ | |
2115 | if (has_prefix(msg, len, "ate0q1")) | |
2116 | return; /* Ignore character echo back from the radio */ | |
2117 | ||
2118 | /* Catch other error messages */ | |
2119 | /* (This is here for backwards compatibility with old firmware) */ | |
2120 | if (has_prefix(msg, len, "ERR_")) { | |
2121 | RecvErr_Message(strip_info, NULL, &msg[4], len - 4); | |
2122 | return; | |
2123 | } | |
2124 | ||
2125 | RecvErr("No initial *", strip_info); | |
2126 | } | |
2127 | ||
2128 | /* | |
2129 | * process_message processes a <CR>-terminated block of data received | |
2130 | * from the radio. If the radio is not in Starmode or has old firmware, | |
2131 | * it may be a line of text in response to an AT command. Ideally, with | |
2132 | * a current radio that's properly in Starmode, all data received should | |
2133 | * be properly framed and checksummed radio message blocks, containing | |
2134 | * either a starmode packet, or a other communication from the radio | |
2135 | * firmware, like "INF_" Info messages and &COMMAND responses. | |
2136 | */ | |
2137 | static void process_message(struct strip *strip_info) | |
2138 | { | |
2139 | STRIP_Header header = { zero_address, zero_address, 0 }; | |
2140 | __u8 *ptr = strip_info->sx_buff; | |
2141 | __u8 *end = strip_info->sx_buff + strip_info->sx_count; | |
2142 | __u8 sendername[32], *sptr = sendername; | |
2143 | MetricomKey key; | |
2144 | ||
2145 | /*HexDump("Receiving", strip_info, ptr, end); */ | |
2146 | ||
2147 | /* Check for start of address marker, and then skip over it */ | |
2148 | if (*ptr == '*') | |
2149 | ptr++; | |
2150 | else { | |
2151 | process_text_message(strip_info); | |
2152 | return; | |
2153 | } | |
2154 | ||
2155 | /* Copy out the return address */ | |
2156 | while (ptr < end && *ptr != '*' | |
2157 | && sptr < ARRAY_END(sendername) - 1) | |
2158 | *sptr++ = *ptr++; | |
2159 | *sptr = 0; /* Null terminate the sender name */ | |
2160 | ||
2161 | /* Check for end of address marker, and skip over it */ | |
2162 | if (ptr >= end || *ptr != '*') { | |
2163 | RecvErr("No second *", strip_info); | |
2164 | return; | |
2165 | } | |
2166 | ptr++; /* Skip the second '*' */ | |
2167 | ||
2168 | /* If the sender name is "&COMMAND", ignore this 'packet' */ | |
2169 | /* (This is here for backwards compatibility with old firmware) */ | |
2170 | if (!strcmp(sendername, "&COMMAND")) { | |
2171 | strip_info->firmware_level = NoStructure; | |
2172 | strip_info->next_command = CompatibilityCommand; | |
2173 | return; | |
2174 | } | |
2175 | ||
2176 | if (ptr + 4 > end) { | |
2177 | RecvErr("No proto key", strip_info); | |
2178 | return; | |
2179 | } | |
2180 | ||
2181 | /* Get the protocol key out of the buffer */ | |
2182 | key.c[0] = *ptr++; | |
2183 | key.c[1] = *ptr++; | |
2184 | key.c[2] = *ptr++; | |
2185 | key.c[3] = *ptr++; | |
2186 | ||
2187 | /* If we're using checksums, verify the checksum at the end of the packet */ | |
2188 | if (strip_info->firmware_level >= ChecksummedMessages) { | |
2189 | end -= 4; /* Chop the last four bytes off the packet (they're the checksum) */ | |
2190 | if (ptr > end) { | |
2191 | RecvErr("Missing Checksum", strip_info); | |
2192 | return; | |
2193 | } | |
2194 | if (!verify_checksum(strip_info)) { | |
2195 | RecvErr("Bad Checksum", strip_info); | |
2196 | return; | |
2197 | } | |
2198 | } | |
2199 | ||
2200 | /*printk(KERN_INFO "%s: Got packet from \"%s\".\n", strip_info->dev->name, sendername); */ | |
2201 | ||
2202 | /* | |
2203 | * Fill in (pseudo) source and destination addresses in the packet. | |
2204 | * We assume that the destination address was our address (the radio does not | |
2205 | * tell us this). If the radio supplies a source address, then we use it. | |
2206 | */ | |
2207 | header.dst_addr = strip_info->true_dev_addr; | |
2208 | string_to_radio_address(&header.src_addr, sendername); | |
2209 | ||
2210 | #ifdef EXT_COUNTERS | |
2211 | if (key.l == SIP0Key.l) { | |
2212 | strip_info->rx_rbytes += (end - ptr); | |
2213 | process_IP_packet(strip_info, &header, ptr, end); | |
2214 | } else if (key.l == ARP0Key.l) { | |
2215 | strip_info->rx_rbytes += (end - ptr); | |
2216 | process_ARP_packet(strip_info, &header, ptr, end); | |
2217 | } else if (key.l == ATR_Key.l) { | |
2218 | strip_info->rx_ebytes += (end - ptr); | |
2219 | process_AT_response(strip_info, ptr, end); | |
2220 | } else if (key.l == ACK_Key.l) { | |
2221 | strip_info->rx_ebytes += (end - ptr); | |
2222 | process_ACK(strip_info, ptr, end); | |
2223 | } else if (key.l == INF_Key.l) { | |
2224 | strip_info->rx_ebytes += (end - ptr); | |
2225 | process_Info(strip_info, ptr, end); | |
2226 | } else if (key.l == ERR_Key.l) { | |
2227 | strip_info->rx_ebytes += (end - ptr); | |
2228 | RecvErr_Message(strip_info, sendername, ptr, end - ptr); | |
2229 | } else | |
2230 | RecvErr("Unrecognized protocol key", strip_info); | |
2231 | #else | |
2232 | if (key.l == SIP0Key.l) | |
2233 | process_IP_packet(strip_info, &header, ptr, end); | |
2234 | else if (key.l == ARP0Key.l) | |
2235 | process_ARP_packet(strip_info, &header, ptr, end); | |
2236 | else if (key.l == ATR_Key.l) | |
2237 | process_AT_response(strip_info, ptr, end); | |
2238 | else if (key.l == ACK_Key.l) | |
2239 | process_ACK(strip_info, ptr, end); | |
2240 | else if (key.l == INF_Key.l) | |
2241 | process_Info(strip_info, ptr, end); | |
2242 | else if (key.l == ERR_Key.l) | |
2243 | RecvErr_Message(strip_info, sendername, ptr, end - ptr); | |
2244 | else | |
2245 | RecvErr("Unrecognized protocol key", strip_info); | |
2246 | #endif | |
2247 | } | |
2248 | ||
2249 | #define TTYERROR(X) ((X) == TTY_BREAK ? "Break" : \ | |
2250 | (X) == TTY_FRAME ? "Framing Error" : \ | |
2251 | (X) == TTY_PARITY ? "Parity Error" : \ | |
2252 | (X) == TTY_OVERRUN ? "Hardware Overrun" : "Unknown Error") | |
2253 | ||
2254 | /* | |
2255 | * Handle the 'receiver data ready' interrupt. | |
2256 | * This function is called by the 'tty_io' module in the kernel when | |
2257 | * a block of STRIP data has been received, which can now be decapsulated | |
2258 | * and sent on to some IP layer for further processing. | |
2259 | */ | |
2260 | ||
2261 | static void strip_receive_buf(struct tty_struct *tty, const unsigned char *cp, | |
2262 | char *fp, int count) | |
2263 | { | |
d2b88814 | 2264 | struct strip *strip_info = tty->disc_data; |
1da177e4 LT |
2265 | const unsigned char *end = cp + count; |
2266 | ||
2267 | if (!strip_info || strip_info->magic != STRIP_MAGIC | |
2268 | || !netif_running(strip_info->dev)) | |
2269 | return; | |
2270 | ||
2271 | spin_lock_bh(&strip_lock); | |
2272 | #if 0 | |
2273 | { | |
2274 | struct timeval tv; | |
2275 | do_gettimeofday(&tv); | |
2276 | printk(KERN_INFO | |
2277 | "**** strip_receive_buf: %3d bytes at %02d.%06d\n", | |
2278 | count, tv.tv_sec % 100, tv.tv_usec); | |
2279 | } | |
2280 | #endif | |
2281 | ||
2282 | #ifdef EXT_COUNTERS | |
2283 | strip_info->rx_sbytes += count; | |
2284 | #endif | |
2285 | ||
2286 | /* Read the characters out of the buffer */ | |
2287 | while (cp < end) { | |
2288 | if (fp && *fp) | |
2289 | printk(KERN_INFO "%s: %s on serial port\n", | |
2290 | strip_info->dev->name, TTYERROR(*fp)); | |
2291 | if (fp && *fp++ && !strip_info->discard) { /* If there's a serial error, record it */ | |
2292 | /* If we have some characters in the buffer, discard them */ | |
2293 | strip_info->discard = strip_info->sx_count; | |
2294 | strip_info->rx_errors++; | |
2295 | } | |
2296 | ||
2297 | /* Leading control characters (CR, NL, Tab, etc.) are ignored */ | |
2298 | if (strip_info->sx_count > 0 || *cp >= ' ') { | |
2299 | if (*cp == 0x0D) { /* If end of packet, decide what to do with it */ | |
2300 | if (strip_info->sx_count > 3000) | |
2301 | printk(KERN_INFO | |
2302 | "%s: Cut a %d byte packet (%zd bytes remaining)%s\n", | |
2303 | strip_info->dev->name, | |
2304 | strip_info->sx_count, | |
2305 | end - cp - 1, | |
2306 | strip_info-> | |
2307 | discard ? " (discarded)" : | |
2308 | ""); | |
2309 | if (strip_info->sx_count > | |
2310 | strip_info->sx_size) { | |
2311 | strip_info->rx_over_errors++; | |
2312 | printk(KERN_INFO | |
2313 | "%s: sx_buff overflow (%d bytes total)\n", | |
2314 | strip_info->dev->name, | |
2315 | strip_info->sx_count); | |
2316 | } else if (strip_info->discard) | |
2317 | printk(KERN_INFO | |
2318 | "%s: Discarding bad packet (%d/%d)\n", | |
2319 | strip_info->dev->name, | |
2320 | strip_info->discard, | |
2321 | strip_info->sx_count); | |
2322 | else | |
2323 | process_message(strip_info); | |
2324 | strip_info->discard = 0; | |
2325 | strip_info->sx_count = 0; | |
2326 | } else { | |
2327 | /* Make sure we have space in the buffer */ | |
2328 | if (strip_info->sx_count < | |
2329 | strip_info->sx_size) | |
2330 | strip_info->sx_buff[strip_info-> | |
2331 | sx_count] = | |
2332 | *cp; | |
2333 | strip_info->sx_count++; | |
2334 | } | |
2335 | } | |
2336 | cp++; | |
2337 | } | |
2338 | spin_unlock_bh(&strip_lock); | |
2339 | } | |
2340 | ||
2341 | ||
2342 | /************************************************************************/ | |
2343 | /* General control routines */ | |
2344 | ||
2345 | static int set_mac_address(struct strip *strip_info, | |
2346 | MetricomAddress * addr) | |
2347 | { | |
2348 | /* | |
2349 | * We're using a manually specified address if the address is set | |
2350 | * to anything other than all ones. Setting the address to all ones | |
2351 | * disables manual mode and goes back to automatic address determination | |
2352 | * (tracking the true address that the radio has). | |
2353 | */ | |
2354 | strip_info->manual_dev_addr = | |
2355 | memcmp(addr->c, broadcast_address.c, | |
2356 | sizeof(broadcast_address)); | |
2357 | if (strip_info->manual_dev_addr) | |
2358 | *(MetricomAddress *) strip_info->dev->dev_addr = *addr; | |
2359 | else | |
2360 | *(MetricomAddress *) strip_info->dev->dev_addr = | |
2361 | strip_info->true_dev_addr; | |
2362 | return 0; | |
2363 | } | |
2364 | ||
2365 | static int strip_set_mac_address(struct net_device *dev, void *addr) | |
2366 | { | |
2367 | struct strip *strip_info = netdev_priv(dev); | |
2368 | struct sockaddr *sa = addr; | |
2369 | printk(KERN_INFO "%s: strip_set_dev_mac_address called\n", dev->name); | |
2370 | set_mac_address(strip_info, (MetricomAddress *) sa->sa_data); | |
2371 | return 0; | |
2372 | } | |
2373 | ||
2374 | static struct net_device_stats *strip_get_stats(struct net_device *dev) | |
2375 | { | |
2376 | struct strip *strip_info = netdev_priv(dev); | |
2377 | static struct net_device_stats stats; | |
2378 | ||
2379 | memset(&stats, 0, sizeof(struct net_device_stats)); | |
2380 | ||
2381 | stats.rx_packets = strip_info->rx_packets; | |
2382 | stats.tx_packets = strip_info->tx_packets; | |
2383 | stats.rx_dropped = strip_info->rx_dropped; | |
2384 | stats.tx_dropped = strip_info->tx_dropped; | |
2385 | stats.tx_errors = strip_info->tx_errors; | |
2386 | stats.rx_errors = strip_info->rx_errors; | |
2387 | stats.rx_over_errors = strip_info->rx_over_errors; | |
2388 | return (&stats); | |
2389 | } | |
2390 | ||
2391 | ||
2392 | /************************************************************************/ | |
2393 | /* Opening and closing */ | |
2394 | ||
2395 | /* | |
2396 | * Here's the order things happen: | |
2397 | * When the user runs "slattach -p strip ..." | |
33f0f88f | 2398 | * 1. The TTY module calls strip_open;; |
1da177e4 LT |
2399 | * 2. strip_open calls strip_alloc |
2400 | * 3. strip_alloc calls register_netdev | |
2401 | * 4. register_netdev calls strip_dev_init | |
2402 | * 5. then strip_open finishes setting up the strip_info | |
2403 | * | |
2404 | * When the user runs "ifconfig st<x> up address netmask ..." | |
2405 | * 6. strip_open_low gets called | |
2406 | * | |
2407 | * When the user runs "ifconfig st<x> down" | |
2408 | * 7. strip_close_low gets called | |
2409 | * | |
2410 | * When the user kills the slattach process | |
2411 | * 8. strip_close gets called | |
2412 | * 9. strip_close calls dev_close | |
2413 | * 10. if the device is still up, then dev_close calls strip_close_low | |
2414 | * 11. strip_close calls strip_free | |
2415 | */ | |
2416 | ||
2417 | /* Open the low-level part of the STRIP channel. Easy! */ | |
2418 | ||
2419 | static int strip_open_low(struct net_device *dev) | |
2420 | { | |
2421 | struct strip *strip_info = netdev_priv(dev); | |
2422 | ||
2423 | if (strip_info->tty == NULL) | |
2424 | return (-ENODEV); | |
2425 | ||
2426 | if (!allocate_buffers(strip_info, dev->mtu)) | |
2427 | return (-ENOMEM); | |
2428 | ||
2429 | strip_info->sx_count = 0; | |
2430 | strip_info->tx_left = 0; | |
2431 | ||
2432 | strip_info->discard = 0; | |
2433 | strip_info->working = FALSE; | |
2434 | strip_info->firmware_level = NoStructure; | |
2435 | strip_info->next_command = CompatibilityCommand; | |
8e8bcf16 | 2436 | strip_info->user_baud = tty_get_baud_rate(strip_info->tty); |
1da177e4 LT |
2437 | |
2438 | printk(KERN_INFO "%s: Initializing Radio.\n", | |
2439 | strip_info->dev->name); | |
2440 | ResetRadio(strip_info); | |
2441 | strip_info->idle_timer.expires = jiffies + 1 * HZ; | |
2442 | add_timer(&strip_info->idle_timer); | |
2443 | netif_wake_queue(dev); | |
2444 | return (0); | |
2445 | } | |
2446 | ||
2447 | ||
2448 | /* | |
2449 | * Close the low-level part of the STRIP channel. Easy! | |
2450 | */ | |
2451 | ||
2452 | static int strip_close_low(struct net_device *dev) | |
2453 | { | |
2454 | struct strip *strip_info = netdev_priv(dev); | |
2455 | ||
2456 | if (strip_info->tty == NULL) | |
2457 | return -EBUSY; | |
8a1ec21e | 2458 | clear_bit(TTY_DO_WRITE_WAKEUP, &strip_info->tty->flags); |
1da177e4 LT |
2459 | netif_stop_queue(dev); |
2460 | ||
2461 | /* | |
2462 | * Free all STRIP frame buffers. | |
2463 | */ | |
b4558ea9 JJ |
2464 | kfree(strip_info->rx_buff); |
2465 | strip_info->rx_buff = NULL; | |
2466 | kfree(strip_info->sx_buff); | |
2467 | strip_info->sx_buff = NULL; | |
2468 | kfree(strip_info->tx_buff); | |
2469 | strip_info->tx_buff = NULL; | |
2470 | ||
1da177e4 LT |
2471 | del_timer(&strip_info->idle_timer); |
2472 | return 0; | |
2473 | } | |
2474 | ||
3b04ddde SH |
2475 | static const struct header_ops strip_header_ops = { |
2476 | .create = strip_header, | |
2477 | .rebuild = strip_rebuild_header, | |
2478 | }; | |
2479 | ||
1cc5920f SH |
2480 | |
2481 | static const struct net_device_ops strip_netdev_ops = { | |
2482 | .ndo_open = strip_open_low, | |
2483 | .ndo_stop = strip_close_low, | |
2484 | .ndo_start_xmit = strip_xmit, | |
2485 | .ndo_set_mac_address = strip_set_mac_address, | |
2486 | .ndo_get_stats = strip_get_stats, | |
2487 | .ndo_change_mtu = strip_change_mtu, | |
2488 | }; | |
2489 | ||
1da177e4 LT |
2490 | /* |
2491 | * This routine is called by DDI when the | |
2492 | * (dynamically assigned) device is registered | |
2493 | */ | |
2494 | ||
2495 | static void strip_dev_setup(struct net_device *dev) | |
2496 | { | |
2497 | /* | |
2498 | * Finish setting up the DEVICE info. | |
2499 | */ | |
2500 | ||
1da177e4 | 2501 | dev->trans_start = 0; |
1da177e4 LT |
2502 | dev->tx_queue_len = 30; /* Drop after 30 frames queued */ |
2503 | ||
2504 | dev->flags = 0; | |
2505 | dev->mtu = DEFAULT_STRIP_MTU; | |
2506 | dev->type = ARPHRD_METRICOM; /* dtang */ | |
2507 | dev->hard_header_len = sizeof(STRIP_Header); | |
2508 | /* | |
b74ca3a8 | 2509 | * netdev_priv(dev) Already holds a pointer to our struct strip |
1da177e4 LT |
2510 | */ |
2511 | ||
e74fbb41 | 2512 | *(MetricomAddress *)dev->broadcast = broadcast_address; |
1da177e4 LT |
2513 | dev->dev_addr[0] = 0; |
2514 | dev->addr_len = sizeof(MetricomAddress); | |
2515 | ||
1cc5920f SH |
2516 | dev->header_ops = &strip_header_ops, |
2517 | dev->netdev_ops = &strip_netdev_ops; | |
1da177e4 LT |
2518 | } |
2519 | ||
2520 | /* | |
2521 | * Free a STRIP channel. | |
2522 | */ | |
2523 | ||
2524 | static void strip_free(struct strip *strip_info) | |
2525 | { | |
2526 | spin_lock_bh(&strip_lock); | |
2527 | list_del_rcu(&strip_info->list); | |
2528 | spin_unlock_bh(&strip_lock); | |
2529 | ||
2530 | strip_info->magic = 0; | |
2531 | ||
2532 | free_netdev(strip_info->dev); | |
2533 | } | |
2534 | ||
2535 | ||
2536 | /* | |
2537 | * Allocate a new free STRIP channel | |
2538 | */ | |
2539 | static struct strip *strip_alloc(void) | |
2540 | { | |
2541 | struct list_head *n; | |
2542 | struct net_device *dev; | |
2543 | struct strip *strip_info; | |
2544 | ||
2545 | dev = alloc_netdev(sizeof(struct strip), "st%d", | |
2546 | strip_dev_setup); | |
2547 | ||
2548 | if (!dev) | |
2549 | return NULL; /* If no more memory, return */ | |
2550 | ||
2551 | ||
6dbc9c89 | 2552 | strip_info = netdev_priv(dev); |
1da177e4 LT |
2553 | strip_info->dev = dev; |
2554 | ||
2555 | strip_info->magic = STRIP_MAGIC; | |
2556 | strip_info->tty = NULL; | |
2557 | ||
2558 | strip_info->gratuitous_arp = jiffies + LongTime; | |
2559 | strip_info->arp_interval = 0; | |
2560 | init_timer(&strip_info->idle_timer); | |
2561 | strip_info->idle_timer.data = (long) dev; | |
2562 | strip_info->idle_timer.function = strip_IdleTask; | |
2563 | ||
2564 | ||
2565 | spin_lock_bh(&strip_lock); | |
2566 | rescan: | |
2567 | /* | |
2568 | * Search the list to find where to put our new entry | |
2569 | * (and in the process decide what channel number it is | |
2570 | * going to be) | |
2571 | */ | |
2572 | list_for_each(n, &strip_list) { | |
2573 | struct strip *s = hlist_entry(n, struct strip, list); | |
2574 | ||
2575 | if (s->dev->base_addr == dev->base_addr) { | |
2576 | ++dev->base_addr; | |
2577 | goto rescan; | |
2578 | } | |
2579 | } | |
2580 | ||
2581 | sprintf(dev->name, "st%ld", dev->base_addr); | |
2582 | ||
2583 | list_add_tail_rcu(&strip_info->list, &strip_list); | |
2584 | spin_unlock_bh(&strip_lock); | |
2585 | ||
2586 | return strip_info; | |
2587 | } | |
2588 | ||
2589 | /* | |
2590 | * Open the high-level part of the STRIP channel. | |
2591 | * This function is called by the TTY module when the | |
2592 | * STRIP line discipline is called for. Because we are | |
2593 | * sure the tty line exists, we only have to link it to | |
2594 | * a free STRIP channel... | |
2595 | */ | |
2596 | ||
2597 | static int strip_open(struct tty_struct *tty) | |
2598 | { | |
d2b88814 | 2599 | struct strip *strip_info = tty->disc_data; |
1da177e4 LT |
2600 | |
2601 | /* | |
2602 | * First make sure we're not already connected. | |
2603 | */ | |
2604 | ||
2605 | if (strip_info && strip_info->magic == STRIP_MAGIC) | |
2606 | return -EEXIST; | |
2607 | ||
8e8bcf16 AC |
2608 | /* |
2609 | * We need a write method. | |
2610 | */ | |
2611 | ||
79f999d0 | 2612 | if (tty->ops->write == NULL || tty->ops->set_termios == NULL) |
8e8bcf16 AC |
2613 | return -EOPNOTSUPP; |
2614 | ||
1da177e4 LT |
2615 | /* |
2616 | * OK. Find a free STRIP channel to use. | |
2617 | */ | |
2618 | if ((strip_info = strip_alloc()) == NULL) | |
2619 | return -ENFILE; | |
2620 | ||
2621 | /* | |
2622 | * Register our newly created device so it can be ifconfig'd | |
2623 | * strip_dev_init() will be called as a side-effect | |
2624 | */ | |
2625 | ||
2626 | if (register_netdev(strip_info->dev) != 0) { | |
2627 | printk(KERN_ERR "strip: register_netdev() failed.\n"); | |
2628 | strip_free(strip_info); | |
2629 | return -ENFILE; | |
2630 | } | |
2631 | ||
2632 | strip_info->tty = tty; | |
2633 | tty->disc_data = strip_info; | |
33f0f88f AC |
2634 | tty->receive_room = 65536; |
2635 | ||
8e8bcf16 | 2636 | tty_driver_flush_buffer(tty); |
1da177e4 LT |
2637 | |
2638 | /* | |
2639 | * Restore default settings | |
2640 | */ | |
2641 | ||
2642 | strip_info->dev->type = ARPHRD_METRICOM; /* dtang */ | |
2643 | ||
2644 | /* | |
2645 | * Set tty options | |
2646 | */ | |
2647 | ||
2648 | tty->termios->c_iflag |= IGNBRK | IGNPAR; /* Ignore breaks and parity errors. */ | |
2649 | tty->termios->c_cflag |= CLOCAL; /* Ignore modem control signals. */ | |
2650 | tty->termios->c_cflag &= ~HUPCL; /* Don't close on hup */ | |
2651 | ||
2652 | printk(KERN_INFO "STRIP: device \"%s\" activated\n", | |
2653 | strip_info->dev->name); | |
2654 | ||
2655 | /* | |
2656 | * Done. We have linked the TTY line to a channel. | |
2657 | */ | |
2658 | return (strip_info->dev->base_addr); | |
2659 | } | |
2660 | ||
2661 | /* | |
2662 | * Close down a STRIP channel. | |
2663 | * This means flushing out any pending queues, and then restoring the | |
2664 | * TTY line discipline to what it was before it got hooked to STRIP | |
2665 | * (which usually is TTY again). | |
2666 | */ | |
2667 | ||
2668 | static void strip_close(struct tty_struct *tty) | |
2669 | { | |
d2b88814 | 2670 | struct strip *strip_info = tty->disc_data; |
1da177e4 LT |
2671 | |
2672 | /* | |
2673 | * First make sure we're connected. | |
2674 | */ | |
2675 | ||
2676 | if (!strip_info || strip_info->magic != STRIP_MAGIC) | |
2677 | return; | |
2678 | ||
2679 | unregister_netdev(strip_info->dev); | |
2680 | ||
2681 | tty->disc_data = NULL; | |
2682 | strip_info->tty = NULL; | |
2683 | printk(KERN_INFO "STRIP: device \"%s\" closed down\n", | |
2684 | strip_info->dev->name); | |
2685 | strip_free(strip_info); | |
2686 | tty->disc_data = NULL; | |
2687 | } | |
2688 | ||
2689 | ||
2690 | /************************************************************************/ | |
2691 | /* Perform I/O control calls on an active STRIP channel. */ | |
2692 | ||
2693 | static int strip_ioctl(struct tty_struct *tty, struct file *file, | |
2694 | unsigned int cmd, unsigned long arg) | |
2695 | { | |
d2b88814 | 2696 | struct strip *strip_info = tty->disc_data; |
1da177e4 LT |
2697 | |
2698 | /* | |
2699 | * First make sure we're connected. | |
2700 | */ | |
2701 | ||
2702 | if (!strip_info || strip_info->magic != STRIP_MAGIC) | |
2703 | return -EINVAL; | |
2704 | ||
2705 | switch (cmd) { | |
2706 | case SIOCGIFNAME: | |
2707 | if(copy_to_user((void __user *) arg, strip_info->dev->name, strlen(strip_info->dev->name) + 1)) | |
2708 | return -EFAULT; | |
2709 | break; | |
2710 | case SIOCSIFHWADDR: | |
2711 | { | |
2712 | MetricomAddress addr; | |
2713 | //printk(KERN_INFO "%s: SIOCSIFHWADDR\n", strip_info->dev->name); | |
2714 | if(copy_from_user(&addr, (void __user *) arg, sizeof(MetricomAddress))) | |
2715 | return -EFAULT; | |
2716 | return set_mac_address(strip_info, &addr); | |
2717 | } | |
1da177e4 | 2718 | default: |
d0127539 | 2719 | return tty_mode_ioctl(tty, file, cmd, arg); |
1da177e4 LT |
2720 | break; |
2721 | } | |
2722 | return 0; | |
2723 | } | |
2724 | ||
2725 | ||
2726 | /************************************************************************/ | |
2727 | /* Initialization */ | |
2728 | ||
4e4f64da | 2729 | static struct tty_ldisc_ops strip_ldisc = { |
1da177e4 LT |
2730 | .magic = TTY_LDISC_MAGIC, |
2731 | .name = "strip", | |
2732 | .owner = THIS_MODULE, | |
2733 | .open = strip_open, | |
2734 | .close = strip_close, | |
2735 | .ioctl = strip_ioctl, | |
2736 | .receive_buf = strip_receive_buf, | |
1da177e4 LT |
2737 | .write_wakeup = strip_write_some_more, |
2738 | }; | |
2739 | ||
2740 | /* | |
2741 | * Initialize the STRIP driver. | |
2742 | * This routine is called at boot time, to bootstrap the multi-channel | |
2743 | * STRIP driver | |
2744 | */ | |
2745 | ||
2746 | static char signon[] __initdata = | |
2747 | KERN_INFO "STRIP: Version %s (unlimited channels)\n"; | |
2748 | ||
2749 | static int __init strip_init_driver(void) | |
2750 | { | |
2751 | int status; | |
2752 | ||
2753 | printk(signon, StripVersion); | |
2754 | ||
2755 | ||
2756 | /* | |
2757 | * Fill in our line protocol discipline, and register it | |
2758 | */ | |
2759 | if ((status = tty_register_ldisc(N_STRIP, &strip_ldisc))) | |
2760 | printk(KERN_ERR "STRIP: can't register line discipline (err = %d)\n", | |
2761 | status); | |
2762 | ||
2763 | /* | |
2764 | * Register the status file with /proc | |
2765 | */ | |
457c4cbc | 2766 | proc_net_fops_create(&init_net, "strip", S_IFREG | S_IRUGO, &strip_seq_fops); |
1da177e4 LT |
2767 | |
2768 | return status; | |
2769 | } | |
2770 | ||
2771 | module_init(strip_init_driver); | |
2772 | ||
2773 | static const char signoff[] __exitdata = | |
2774 | KERN_INFO "STRIP: Module Unloaded\n"; | |
2775 | ||
2776 | static void __exit strip_exit_driver(void) | |
2777 | { | |
2778 | int i; | |
2779 | struct list_head *p,*n; | |
2780 | ||
2781 | /* module ref count rules assure that all entries are unregistered */ | |
2782 | list_for_each_safe(p, n, &strip_list) { | |
2783 | struct strip *s = list_entry(p, struct strip, list); | |
2784 | strip_free(s); | |
2785 | } | |
2786 | ||
2787 | /* Unregister with the /proc/net file here. */ | |
457c4cbc | 2788 | proc_net_remove(&init_net, "strip"); |
1da177e4 | 2789 | |
64ccd715 | 2790 | if ((i = tty_unregister_ldisc(N_STRIP))) |
1da177e4 LT |
2791 | printk(KERN_ERR "STRIP: can't unregister line discipline (err = %d)\n", i); |
2792 | ||
2793 | printk(signoff); | |
2794 | } | |
2795 | ||
2796 | module_exit(strip_exit_driver); | |
2797 | ||
2798 | MODULE_AUTHOR("Stuart Cheshire <cheshire@cs.stanford.edu>"); | |
2799 | MODULE_DESCRIPTION("Starmode Radio IP (STRIP) Device Driver"); | |
2800 | MODULE_LICENSE("Dual BSD/GPL"); | |
2801 | ||
2802 | MODULE_SUPPORTED_DEVICE("Starmode Radio IP (STRIP) modem"); |