Commit | Line | Data |
---|---|---|
84edbeea AM |
1 | /* |
2 | * Copyright (C) ST-Ericsson SA 2012 | |
3 | * | |
4 | * Charger driver for AB8500 | |
5 | * | |
6 | * License Terms: GNU General Public License v2 | |
7 | * Author: | |
8 | * Johan Palsson <johan.palsson@stericsson.com> | |
9 | * Karl Komierowski <karl.komierowski@stericsson.com> | |
10 | * Arun R Murthy <arun.murthy@stericsson.com> | |
11 | */ | |
12 | ||
13 | #include <linux/init.h> | |
14 | #include <linux/module.h> | |
15 | #include <linux/device.h> | |
16 | #include <linux/interrupt.h> | |
17 | #include <linux/delay.h> | |
8891716e | 18 | #include <linux/notifier.h> |
84edbeea AM |
19 | #include <linux/slab.h> |
20 | #include <linux/platform_device.h> | |
21 | #include <linux/power_supply.h> | |
22 | #include <linux/completion.h> | |
23 | #include <linux/regulator/consumer.h> | |
24 | #include <linux/err.h> | |
25 | #include <linux/workqueue.h> | |
26 | #include <linux/kobject.h> | |
4aef72db R |
27 | #include <linux/of.h> |
28 | #include <linux/mfd/core.h> | |
84edbeea AM |
29 | #include <linux/mfd/abx500/ab8500.h> |
30 | #include <linux/mfd/abx500.h> | |
31 | #include <linux/mfd/abx500/ab8500-bm.h> | |
32 | #include <linux/mfd/abx500/ab8500-gpadc.h> | |
33 | #include <linux/mfd/abx500/ux500_chargalg.h> | |
34 | #include <linux/usb/otg.h> | |
b269fff4 | 35 | #include <linux/mutex.h> |
84edbeea AM |
36 | |
37 | /* Charger constants */ | |
38 | #define NO_PW_CONN 0 | |
39 | #define AC_PW_CONN 1 | |
40 | #define USB_PW_CONN 2 | |
41 | ||
42 | #define MAIN_WDOG_ENA 0x01 | |
43 | #define MAIN_WDOG_KICK 0x02 | |
44 | #define MAIN_WDOG_DIS 0x00 | |
45 | #define CHARG_WD_KICK 0x01 | |
46 | #define MAIN_CH_ENA 0x01 | |
47 | #define MAIN_CH_NO_OVERSHOOT_ENA_N 0x02 | |
48 | #define USB_CH_ENA 0x01 | |
49 | #define USB_CHG_NO_OVERSHOOT_ENA_N 0x02 | |
50 | #define MAIN_CH_DET 0x01 | |
51 | #define MAIN_CH_CV_ON 0x04 | |
52 | #define USB_CH_CV_ON 0x08 | |
53 | #define VBUS_DET_DBNC100 0x02 | |
54 | #define VBUS_DET_DBNC1 0x01 | |
55 | #define OTP_ENABLE_WD 0x01 | |
4dcdf577 | 56 | #define DROP_COUNT_RESET 0x01 |
b3ea5f45 | 57 | #define USB_CH_DET 0x01 |
84edbeea AM |
58 | |
59 | #define MAIN_CH_INPUT_CURR_SHIFT 4 | |
60 | #define VBUS_IN_CURR_LIM_SHIFT 4 | |
861a30da | 61 | #define AB8540_VBUS_IN_CURR_LIM_SHIFT 2 |
34c11a70 | 62 | #define AUTO_VBUS_IN_CURR_LIM_SHIFT 4 |
861a30da | 63 | #define AB8540_AUTO_VBUS_IN_CURR_MASK 0x3F |
f7470b5d | 64 | #define VBUS_IN_CURR_LIM_RETRY_SET_TIME 30 /* seconds */ |
84edbeea AM |
65 | |
66 | #define LED_INDICATOR_PWM_ENA 0x01 | |
67 | #define LED_INDICATOR_PWM_DIS 0x00 | |
68 | #define LED_IND_CUR_5MA 0x04 | |
69 | #define LED_INDICATOR_PWM_DUTY_252_256 0xBF | |
70 | ||
71 | /* HW failure constants */ | |
72 | #define MAIN_CH_TH_PROT 0x02 | |
73 | #define VBUS_CH_NOK 0x08 | |
74 | #define USB_CH_TH_PROT 0x02 | |
75 | #define VBUS_OVV_TH 0x01 | |
76 | #define MAIN_CH_NOK 0x01 | |
77 | #define VBUS_DET 0x80 | |
78 | ||
b269fff4 LJ |
79 | #define MAIN_CH_STATUS2_MAINCHGDROP 0x80 |
80 | #define MAIN_CH_STATUS2_MAINCHARGERDETDBNC 0x40 | |
81 | #define USB_CH_VBUSDROP 0x40 | |
82 | #define USB_CH_VBUSDETDBNC 0x01 | |
83 | ||
84edbeea AM |
84 | /* UsbLineStatus register bit masks */ |
85 | #define AB8500_USB_LINK_STATUS 0x78 | |
d4337660 | 86 | #define AB8505_USB_LINK_STATUS 0xF8 |
84edbeea | 87 | #define AB8500_STD_HOST_SUSP 0x18 |
861a30da | 88 | #define USB_LINK_STATUS_SHIFT 3 |
84edbeea AM |
89 | |
90 | /* Watchdog timeout constant */ | |
91 | #define WD_TIMER 0x30 /* 4min */ | |
92 | #define WD_KICK_INTERVAL (60 * HZ) | |
93 | ||
94 | /* Lowest charger voltage is 3.39V -> 0x4E */ | |
95 | #define LOW_VOLT_REG 0x4E | |
96 | ||
f8e96dff JB |
97 | /* Step up/down delay in us */ |
98 | #define STEP_UDELAY 1000 | |
99 | ||
b269fff4 LJ |
100 | #define CHARGER_STATUS_POLL 10 /* in ms */ |
101 | ||
e07a5645 LP |
102 | #define CHG_WD_INTERVAL (60 * HZ) |
103 | ||
b0163222 | 104 | #define AB8500_SW_CONTROL_FALLBACK 0x03 |
34c11a70 POH |
105 | /* Wait for enumeration before charing in us */ |
106 | #define WAIT_ACA_RID_ENUMERATION (5 * 1000) | |
8891716e LJ |
107 | /*External charger control*/ |
108 | #define AB8500_SYS_CHARGER_CONTROL_REG 0x52 | |
109 | #define EXTERNAL_CHARGER_DISABLE_REG_VAL 0x03 | |
110 | #define EXTERNAL_CHARGER_ENABLE_REG_VAL 0x07 | |
b0163222 | 111 | |
84edbeea AM |
112 | /* UsbLineStatus register - usb types */ |
113 | enum ab8500_charger_link_status { | |
114 | USB_STAT_NOT_CONFIGURED, | |
115 | USB_STAT_STD_HOST_NC, | |
116 | USB_STAT_STD_HOST_C_NS, | |
117 | USB_STAT_STD_HOST_C_S, | |
118 | USB_STAT_HOST_CHG_NM, | |
119 | USB_STAT_HOST_CHG_HS, | |
120 | USB_STAT_HOST_CHG_HS_CHIRP, | |
121 | USB_STAT_DEDICATED_CHG, | |
122 | USB_STAT_ACA_RID_A, | |
123 | USB_STAT_ACA_RID_B, | |
124 | USB_STAT_ACA_RID_C_NM, | |
125 | USB_STAT_ACA_RID_C_HS, | |
126 | USB_STAT_ACA_RID_C_HS_CHIRP, | |
127 | USB_STAT_HM_IDGND, | |
128 | USB_STAT_RESERVED, | |
129 | USB_STAT_NOT_VALID_LINK, | |
74a8e349 HB |
130 | USB_STAT_PHY_EN, |
131 | USB_STAT_SUP_NO_IDGND_VBUS, | |
132 | USB_STAT_SUP_IDGND_VBUS, | |
133 | USB_STAT_CHARGER_LINE_1, | |
134 | USB_STAT_CARKIT_1, | |
135 | USB_STAT_CARKIT_2, | |
136 | USB_STAT_ACA_DOCK_CHARGER, | |
84edbeea AM |
137 | }; |
138 | ||
139 | enum ab8500_usb_state { | |
140 | AB8500_BM_USB_STATE_RESET_HS, /* HighSpeed Reset */ | |
141 | AB8500_BM_USB_STATE_RESET_FS, /* FullSpeed/LowSpeed Reset */ | |
142 | AB8500_BM_USB_STATE_CONFIGURED, | |
143 | AB8500_BM_USB_STATE_SUSPEND, | |
144 | AB8500_BM_USB_STATE_RESUME, | |
145 | AB8500_BM_USB_STATE_MAX, | |
146 | }; | |
147 | ||
148 | /* VBUS input current limits supported in AB8500 in mA */ | |
149 | #define USB_CH_IP_CUR_LVL_0P05 50 | |
150 | #define USB_CH_IP_CUR_LVL_0P09 98 | |
151 | #define USB_CH_IP_CUR_LVL_0P19 193 | |
152 | #define USB_CH_IP_CUR_LVL_0P29 290 | |
153 | #define USB_CH_IP_CUR_LVL_0P38 380 | |
154 | #define USB_CH_IP_CUR_LVL_0P45 450 | |
155 | #define USB_CH_IP_CUR_LVL_0P5 500 | |
156 | #define USB_CH_IP_CUR_LVL_0P6 600 | |
157 | #define USB_CH_IP_CUR_LVL_0P7 700 | |
158 | #define USB_CH_IP_CUR_LVL_0P8 800 | |
159 | #define USB_CH_IP_CUR_LVL_0P9 900 | |
160 | #define USB_CH_IP_CUR_LVL_1P0 1000 | |
161 | #define USB_CH_IP_CUR_LVL_1P1 1100 | |
162 | #define USB_CH_IP_CUR_LVL_1P3 1300 | |
163 | #define USB_CH_IP_CUR_LVL_1P4 1400 | |
164 | #define USB_CH_IP_CUR_LVL_1P5 1500 | |
165 | ||
166 | #define VBAT_TRESH_IP_CUR_RED 3800 | |
167 | ||
168 | #define to_ab8500_charger_usb_device_info(x) container_of((x), \ | |
169 | struct ab8500_charger, usb_chg) | |
170 | #define to_ab8500_charger_ac_device_info(x) container_of((x), \ | |
171 | struct ab8500_charger, ac_chg) | |
172 | ||
173 | /** | |
174 | * struct ab8500_charger_interrupts - ab8500 interupts | |
175 | * @name: name of the interrupt | |
176 | * @isr function pointer to the isr | |
177 | */ | |
178 | struct ab8500_charger_interrupts { | |
179 | char *name; | |
180 | irqreturn_t (*isr)(int irq, void *data); | |
181 | }; | |
182 | ||
183 | struct ab8500_charger_info { | |
184 | int charger_connected; | |
185 | int charger_online; | |
186 | int charger_voltage; | |
187 | int cv_active; | |
188 | bool wd_expired; | |
a864c5a8 | 189 | int charger_current; |
84edbeea AM |
190 | }; |
191 | ||
192 | struct ab8500_charger_event_flags { | |
193 | bool mainextchnotok; | |
194 | bool main_thermal_prot; | |
195 | bool usb_thermal_prot; | |
196 | bool vbus_ovv; | |
197 | bool usbchargernotok; | |
198 | bool chgwdexp; | |
199 | bool vbus_collapse; | |
34c11a70 | 200 | bool vbus_drop_end; |
84edbeea AM |
201 | }; |
202 | ||
203 | struct ab8500_charger_usb_state { | |
84edbeea | 204 | int usb_current; |
34c11a70 | 205 | int usb_current_tmp; |
84edbeea | 206 | enum ab8500_usb_state state; |
34c11a70 | 207 | enum ab8500_usb_state state_tmp; |
84edbeea AM |
208 | spinlock_t usb_lock; |
209 | }; | |
210 | ||
f7470b5d LJ |
211 | struct ab8500_charger_max_usb_in_curr { |
212 | int usb_type_max; | |
213 | int set_max; | |
214 | int calculated_max; | |
215 | }; | |
216 | ||
84edbeea AM |
217 | /** |
218 | * struct ab8500_charger - ab8500 Charger device information | |
219 | * @dev: Pointer to the structure device | |
84edbeea AM |
220 | * @vbus_detected: VBUS detected |
221 | * @vbus_detected_start: | |
222 | * VBUS detected during startup | |
223 | * @ac_conn: This will be true when the AC charger has been plugged | |
224 | * @vddadc_en_ac: Indicate if VDD ADC supply is enabled because AC | |
225 | * charger is enabled | |
226 | * @vddadc_en_usb: Indicate if VDD ADC supply is enabled because USB | |
227 | * charger is enabled | |
228 | * @vbat Battery voltage | |
229 | * @old_vbat Previously measured battery voltage | |
4b45f4a9 | 230 | * @usb_device_is_unrecognised USB device is unrecognised by the hardware |
84edbeea | 231 | * @autopower Indicate if we should have automatic pwron after pwrloss |
4aef72db | 232 | * @autopower_cfg platform specific power config support for "pwron after pwrloss" |
ff38090a | 233 | * @invalid_charger_detect_state State when forcing AB to use invalid charger |
34c11a70 POH |
234 | * @is_aca_rid: Incicate if accessory is ACA type |
235 | * @current_stepping_sessions: | |
236 | * Counter for current stepping sessions | |
84edbeea AM |
237 | * @parent: Pointer to the struct ab8500 |
238 | * @gpadc: Pointer to the struct gpadc | |
b0284de0 | 239 | * @bm: Platform specific battery management information |
84edbeea AM |
240 | * @flags: Structure for information about events triggered |
241 | * @usb_state: Structure for usb stack information | |
f7470b5d | 242 | * @max_usb_in_curr: Max USB charger input current |
84edbeea AM |
243 | * @ac_chg: AC charger power supply |
244 | * @usb_chg: USB charger power supply | |
245 | * @ac: Structure that holds the AC charger properties | |
246 | * @usb: Structure that holds the USB charger properties | |
247 | * @regu: Pointer to the struct regulator | |
248 | * @charger_wq: Work queue for the IRQs and checking HW state | |
34c11a70 POH |
249 | * @usb_ipt_crnt_lock: Lock to protect VBUS input current setting from mutuals |
250 | * @pm_lock: Lock to prevent system to suspend | |
84edbeea AM |
251 | * @check_vbat_work Work for checking vbat threshold to adjust vbus current |
252 | * @check_hw_failure_work: Work for checking HW state | |
253 | * @check_usbchgnotok_work: Work for checking USB charger not ok status | |
254 | * @kick_wd_work: Work for kicking the charger watchdog in case | |
255 | * of ABB rev 1.* due to the watchog logic bug | |
b269fff4 LJ |
256 | * @ac_charger_attached_work: Work for checking if AC charger is still |
257 | * connected | |
258 | * @usb_charger_attached_work: Work for checking if USB charger is still | |
259 | * connected | |
84edbeea AM |
260 | * @ac_work: Work for checking AC charger connection |
261 | * @detect_usb_type_work: Work for detecting the USB type connected | |
262 | * @usb_link_status_work: Work for checking the new USB link status | |
263 | * @usb_state_changed_work: Work for checking USB state | |
34c11a70 POH |
264 | * @attach_work: Work for detecting USB type |
265 | * @vbus_drop_end_work: Work for detecting VBUS drop end | |
84edbeea AM |
266 | * @check_main_thermal_prot_work: |
267 | * Work for checking Main thermal status | |
268 | * @check_usb_thermal_prot_work: | |
269 | * Work for checking USB thermal status | |
b269fff4 | 270 | * @charger_attached_mutex: For controlling the wakelock |
84edbeea AM |
271 | */ |
272 | struct ab8500_charger { | |
273 | struct device *dev; | |
84edbeea AM |
274 | bool vbus_detected; |
275 | bool vbus_detected_start; | |
276 | bool ac_conn; | |
277 | bool vddadc_en_ac; | |
278 | bool vddadc_en_usb; | |
279 | int vbat; | |
280 | int old_vbat; | |
4b45f4a9 | 281 | bool usb_device_is_unrecognised; |
84edbeea | 282 | bool autopower; |
4aef72db | 283 | bool autopower_cfg; |
ff38090a | 284 | int invalid_charger_detect_state; |
34c11a70 POH |
285 | int is_aca_rid; |
286 | atomic_t current_stepping_sessions; | |
84edbeea AM |
287 | struct ab8500 *parent; |
288 | struct ab8500_gpadc *gpadc; | |
b0284de0 | 289 | struct abx500_bm_data *bm; |
84edbeea AM |
290 | struct ab8500_charger_event_flags flags; |
291 | struct ab8500_charger_usb_state usb_state; | |
f7470b5d | 292 | struct ab8500_charger_max_usb_in_curr max_usb_in_curr; |
84edbeea AM |
293 | struct ux500_charger ac_chg; |
294 | struct ux500_charger usb_chg; | |
295 | struct ab8500_charger_info ac; | |
296 | struct ab8500_charger_info usb; | |
297 | struct regulator *regu; | |
298 | struct workqueue_struct *charger_wq; | |
34c11a70 | 299 | struct mutex usb_ipt_crnt_lock; |
84edbeea AM |
300 | struct delayed_work check_vbat_work; |
301 | struct delayed_work check_hw_failure_work; | |
302 | struct delayed_work check_usbchgnotok_work; | |
303 | struct delayed_work kick_wd_work; | |
34c11a70 | 304 | struct delayed_work usb_state_changed_work; |
4b45f4a9 | 305 | struct delayed_work attach_work; |
b269fff4 LJ |
306 | struct delayed_work ac_charger_attached_work; |
307 | struct delayed_work usb_charger_attached_work; | |
34c11a70 | 308 | struct delayed_work vbus_drop_end_work; |
84edbeea AM |
309 | struct work_struct ac_work; |
310 | struct work_struct detect_usb_type_work; | |
311 | struct work_struct usb_link_status_work; | |
84edbeea AM |
312 | struct work_struct check_main_thermal_prot_work; |
313 | struct work_struct check_usb_thermal_prot_work; | |
efd71c89 | 314 | struct usb_phy *usb_phy; |
84edbeea | 315 | struct notifier_block nb; |
b269fff4 | 316 | struct mutex charger_attached_mutex; |
84edbeea AM |
317 | }; |
318 | ||
319 | /* AC properties */ | |
320 | static enum power_supply_property ab8500_charger_ac_props[] = { | |
321 | POWER_SUPPLY_PROP_HEALTH, | |
322 | POWER_SUPPLY_PROP_PRESENT, | |
323 | POWER_SUPPLY_PROP_ONLINE, | |
324 | POWER_SUPPLY_PROP_VOLTAGE_NOW, | |
325 | POWER_SUPPLY_PROP_VOLTAGE_AVG, | |
326 | POWER_SUPPLY_PROP_CURRENT_NOW, | |
327 | }; | |
328 | ||
329 | /* USB properties */ | |
330 | static enum power_supply_property ab8500_charger_usb_props[] = { | |
331 | POWER_SUPPLY_PROP_HEALTH, | |
332 | POWER_SUPPLY_PROP_CURRENT_AVG, | |
333 | POWER_SUPPLY_PROP_PRESENT, | |
334 | POWER_SUPPLY_PROP_ONLINE, | |
335 | POWER_SUPPLY_PROP_VOLTAGE_NOW, | |
336 | POWER_SUPPLY_PROP_VOLTAGE_AVG, | |
337 | POWER_SUPPLY_PROP_CURRENT_NOW, | |
338 | }; | |
339 | ||
defbfa9c POH |
340 | /* |
341 | * Function for enabling and disabling sw fallback mode | |
342 | * should always be disabled when no charger is connected. | |
84edbeea | 343 | */ |
defbfa9c POH |
344 | static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di, |
345 | bool fallback) | |
84edbeea | 346 | { |
b0163222 | 347 | u8 val; |
84edbeea | 348 | u8 reg; |
b0163222 NG |
349 | u8 bank; |
350 | u8 bit; | |
84edbeea AM |
351 | int ret; |
352 | ||
defbfa9c | 353 | dev_dbg(di->dev, "SW Fallback: %d\n", fallback); |
84edbeea | 354 | |
b0163222 NG |
355 | if (is_ab8500(di->parent)) { |
356 | bank = 0x15; | |
357 | reg = 0x0; | |
358 | bit = 3; | |
359 | } else { | |
360 | bank = AB8500_SYS_CTRL1_BLOCK; | |
361 | reg = AB8500_SW_CONTROL_FALLBACK; | |
362 | bit = 0; | |
363 | } | |
364 | ||
defbfa9c | 365 | /* read the register containing fallback bit */ |
b0163222 NG |
366 | ret = abx500_get_register_interruptible(di->dev, bank, reg, &val); |
367 | if (ret < 0) { | |
368 | dev_err(di->dev, "%d read failed\n", __LINE__); | |
84edbeea AM |
369 | return; |
370 | } | |
371 | ||
b0163222 NG |
372 | if (is_ab8500(di->parent)) { |
373 | /* enable the OPT emulation registers */ | |
374 | ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2); | |
375 | if (ret) { | |
376 | dev_err(di->dev, "%d write failed\n", __LINE__); | |
377 | goto disable_otp; | |
378 | } | |
84edbeea AM |
379 | } |
380 | ||
defbfa9c | 381 | if (fallback) |
b0163222 | 382 | val |= (1 << bit); |
84edbeea | 383 | else |
b0163222 | 384 | val &= ~(1 << bit); |
84edbeea | 385 | |
defbfa9c | 386 | /* write back the changed fallback bit value to register */ |
b0163222 | 387 | ret = abx500_set_register_interruptible(di->dev, bank, reg, val); |
84edbeea AM |
388 | if (ret) { |
389 | dev_err(di->dev, "%d write failed\n", __LINE__); | |
84edbeea AM |
390 | } |
391 | ||
b0163222 NG |
392 | disable_otp: |
393 | if (is_ab8500(di->parent)) { | |
394 | /* disable the set OTP registers again */ | |
395 | ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0); | |
396 | if (ret) { | |
397 | dev_err(di->dev, "%d write failed\n", __LINE__); | |
398 | } | |
84edbeea AM |
399 | } |
400 | } | |
401 | ||
402 | /** | |
403 | * ab8500_power_supply_changed - a wrapper with local extentions for | |
404 | * power_supply_changed | |
405 | * @di: pointer to the ab8500_charger structure | |
406 | * @psy: pointer to power_supply_that have changed. | |
407 | * | |
408 | */ | |
409 | static void ab8500_power_supply_changed(struct ab8500_charger *di, | |
410 | struct power_supply *psy) | |
411 | { | |
4aef72db | 412 | if (di->autopower_cfg) { |
84edbeea AM |
413 | if (!di->usb.charger_connected && |
414 | !di->ac.charger_connected && | |
415 | di->autopower) { | |
416 | di->autopower = false; | |
defbfa9c | 417 | ab8500_enable_disable_sw_fallback(di, false); |
84edbeea AM |
418 | } else if (!di->autopower && |
419 | (di->ac.charger_connected || | |
420 | di->usb.charger_connected)) { | |
421 | di->autopower = true; | |
defbfa9c | 422 | ab8500_enable_disable_sw_fallback(di, true); |
84edbeea AM |
423 | } |
424 | } | |
425 | power_supply_changed(psy); | |
426 | } | |
427 | ||
428 | static void ab8500_charger_set_usb_connected(struct ab8500_charger *di, | |
429 | bool connected) | |
430 | { | |
431 | if (connected != di->usb.charger_connected) { | |
432 | dev_dbg(di->dev, "USB connected:%i\n", connected); | |
433 | di->usb.charger_connected = connected; | |
f7470b5d LJ |
434 | |
435 | if (!connected) | |
436 | di->flags.vbus_drop_end = false; | |
437 | ||
84edbeea | 438 | sysfs_notify(&di->usb_chg.psy.dev->kobj, NULL, "present"); |
b269fff4 LJ |
439 | |
440 | if (connected) { | |
441 | mutex_lock(&di->charger_attached_mutex); | |
442 | mutex_unlock(&di->charger_attached_mutex); | |
443 | ||
261c5136 RV |
444 | if (is_ab8500(di->parent)) |
445 | queue_delayed_work(di->charger_wq, | |
b269fff4 LJ |
446 | &di->usb_charger_attached_work, |
447 | HZ); | |
448 | } else { | |
449 | cancel_delayed_work_sync(&di->usb_charger_attached_work); | |
450 | mutex_lock(&di->charger_attached_mutex); | |
451 | mutex_unlock(&di->charger_attached_mutex); | |
452 | } | |
84edbeea AM |
453 | } |
454 | } | |
455 | ||
456 | /** | |
457 | * ab8500_charger_get_ac_voltage() - get ac charger voltage | |
458 | * @di: pointer to the ab8500_charger structure | |
459 | * | |
460 | * Returns ac charger voltage (on success) | |
461 | */ | |
462 | static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di) | |
463 | { | |
464 | int vch; | |
465 | ||
466 | /* Only measure voltage if the charger is connected */ | |
467 | if (di->ac.charger_connected) { | |
468 | vch = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_V); | |
469 | if (vch < 0) | |
470 | dev_err(di->dev, "%s gpadc conv failed,\n", __func__); | |
471 | } else { | |
472 | vch = 0; | |
473 | } | |
474 | return vch; | |
475 | } | |
476 | ||
477 | /** | |
478 | * ab8500_charger_ac_cv() - check if the main charger is in CV mode | |
479 | * @di: pointer to the ab8500_charger structure | |
480 | * | |
481 | * Returns ac charger CV mode (on success) else error code | |
482 | */ | |
483 | static int ab8500_charger_ac_cv(struct ab8500_charger *di) | |
484 | { | |
485 | u8 val; | |
486 | int ret = 0; | |
487 | ||
488 | /* Only check CV mode if the charger is online */ | |
489 | if (di->ac.charger_online) { | |
490 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, | |
491 | AB8500_CH_STATUS1_REG, &val); | |
492 | if (ret < 0) { | |
493 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); | |
494 | return 0; | |
495 | } | |
496 | ||
497 | if (val & MAIN_CH_CV_ON) | |
498 | ret = 1; | |
499 | else | |
500 | ret = 0; | |
501 | } | |
502 | ||
503 | return ret; | |
504 | } | |
505 | ||
506 | /** | |
507 | * ab8500_charger_get_vbus_voltage() - get vbus voltage | |
508 | * @di: pointer to the ab8500_charger structure | |
509 | * | |
510 | * This function returns the vbus voltage. | |
511 | * Returns vbus voltage (on success) | |
512 | */ | |
513 | static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di) | |
514 | { | |
515 | int vch; | |
516 | ||
517 | /* Only measure voltage if the charger is connected */ | |
518 | if (di->usb.charger_connected) { | |
519 | vch = ab8500_gpadc_convert(di->gpadc, VBUS_V); | |
520 | if (vch < 0) | |
521 | dev_err(di->dev, "%s gpadc conv failed\n", __func__); | |
522 | } else { | |
523 | vch = 0; | |
524 | } | |
525 | return vch; | |
526 | } | |
527 | ||
528 | /** | |
529 | * ab8500_charger_get_usb_current() - get usb charger current | |
530 | * @di: pointer to the ab8500_charger structure | |
531 | * | |
532 | * This function returns the usb charger current. | |
533 | * Returns usb current (on success) and error code on failure | |
534 | */ | |
535 | static int ab8500_charger_get_usb_current(struct ab8500_charger *di) | |
536 | { | |
537 | int ich; | |
538 | ||
539 | /* Only measure current if the charger is online */ | |
540 | if (di->usb.charger_online) { | |
541 | ich = ab8500_gpadc_convert(di->gpadc, USB_CHARGER_C); | |
542 | if (ich < 0) | |
543 | dev_err(di->dev, "%s gpadc conv failed\n", __func__); | |
544 | } else { | |
545 | ich = 0; | |
546 | } | |
547 | return ich; | |
548 | } | |
549 | ||
550 | /** | |
551 | * ab8500_charger_get_ac_current() - get ac charger current | |
552 | * @di: pointer to the ab8500_charger structure | |
553 | * | |
554 | * This function returns the ac charger current. | |
555 | * Returns ac current (on success) and error code on failure. | |
556 | */ | |
557 | static int ab8500_charger_get_ac_current(struct ab8500_charger *di) | |
558 | { | |
559 | int ich; | |
560 | ||
561 | /* Only measure current if the charger is online */ | |
562 | if (di->ac.charger_online) { | |
563 | ich = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_C); | |
564 | if (ich < 0) | |
565 | dev_err(di->dev, "%s gpadc conv failed\n", __func__); | |
566 | } else { | |
567 | ich = 0; | |
568 | } | |
569 | return ich; | |
570 | } | |
571 | ||
572 | /** | |
573 | * ab8500_charger_usb_cv() - check if the usb charger is in CV mode | |
574 | * @di: pointer to the ab8500_charger structure | |
575 | * | |
576 | * Returns ac charger CV mode (on success) else error code | |
577 | */ | |
578 | static int ab8500_charger_usb_cv(struct ab8500_charger *di) | |
579 | { | |
580 | int ret; | |
581 | u8 val; | |
582 | ||
583 | /* Only check CV mode if the charger is online */ | |
584 | if (di->usb.charger_online) { | |
585 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, | |
586 | AB8500_CH_USBCH_STAT1_REG, &val); | |
587 | if (ret < 0) { | |
588 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); | |
589 | return 0; | |
590 | } | |
591 | ||
592 | if (val & USB_CH_CV_ON) | |
593 | ret = 1; | |
594 | else | |
595 | ret = 0; | |
596 | } else { | |
597 | ret = 0; | |
598 | } | |
599 | ||
600 | return ret; | |
601 | } | |
602 | ||
603 | /** | |
604 | * ab8500_charger_detect_chargers() - Detect the connected chargers | |
605 | * @di: pointer to the ab8500_charger structure | |
34c11a70 | 606 | * @probe: if probe, don't delay and wait for HW |
84edbeea AM |
607 | * |
608 | * Returns the type of charger connected. | |
609 | * For USB it will not mean we can actually charge from it | |
610 | * but that there is a USB cable connected that we have to | |
611 | * identify. This is used during startup when we don't get | |
612 | * interrupts of the charger detection | |
613 | * | |
614 | * Returns an integer value, that means, | |
615 | * NO_PW_CONN no power supply is connected | |
616 | * AC_PW_CONN if the AC power supply is connected | |
617 | * USB_PW_CONN if the USB power supply is connected | |
618 | * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected | |
619 | */ | |
34c11a70 | 620 | static int ab8500_charger_detect_chargers(struct ab8500_charger *di, bool probe) |
84edbeea AM |
621 | { |
622 | int result = NO_PW_CONN; | |
623 | int ret; | |
624 | u8 val; | |
625 | ||
626 | /* Check for AC charger */ | |
627 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, | |
628 | AB8500_CH_STATUS1_REG, &val); | |
629 | if (ret < 0) { | |
630 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); | |
631 | return ret; | |
632 | } | |
633 | ||
634 | if (val & MAIN_CH_DET) | |
635 | result = AC_PW_CONN; | |
636 | ||
637 | /* Check for USB charger */ | |
34c11a70 POH |
638 | |
639 | if (!probe) { | |
640 | /* | |
641 | * AB8500 says VBUS_DET_DBNC1 & VBUS_DET_DBNC100 | |
642 | * when disconnecting ACA even though no | |
643 | * charger was connected. Try waiting a little | |
644 | * longer than the 100 ms of VBUS_DET_DBNC100... | |
645 | */ | |
646 | msleep(110); | |
647 | } | |
84edbeea AM |
648 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, |
649 | AB8500_CH_USBCH_STAT1_REG, &val); | |
650 | if (ret < 0) { | |
651 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); | |
652 | return ret; | |
653 | } | |
34c11a70 POH |
654 | dev_dbg(di->dev, |
655 | "%s AB8500_CH_USBCH_STAT1_REG %x\n", __func__, | |
656 | val); | |
84edbeea AM |
657 | if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100)) |
658 | result |= USB_PW_CONN; | |
659 | ||
660 | return result; | |
661 | } | |
662 | ||
663 | /** | |
664 | * ab8500_charger_max_usb_curr() - get the max curr for the USB type | |
665 | * @di: pointer to the ab8500_charger structure | |
666 | * @link_status: the identified USB type | |
667 | * | |
668 | * Get the maximum current that is allowed to be drawn from the host | |
669 | * based on the USB type. | |
670 | * Returns error code in case of failure else 0 on success | |
671 | */ | |
672 | static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, | |
74a8e349 | 673 | enum ab8500_charger_link_status link_status) |
84edbeea AM |
674 | { |
675 | int ret = 0; | |
676 | ||
4b45f4a9 MC |
677 | di->usb_device_is_unrecognised = false; |
678 | ||
34c11a70 POH |
679 | /* |
680 | * Platform only supports USB 2.0. | |
681 | * This means that charging current from USB source | |
682 | * is maximum 500 mA. Every occurence of USB_STAT_*_HOST_* | |
683 | * should set USB_CH_IP_CUR_LVL_0P5. | |
684 | */ | |
685 | ||
84edbeea AM |
686 | switch (link_status) { |
687 | case USB_STAT_STD_HOST_NC: | |
688 | case USB_STAT_STD_HOST_C_NS: | |
689 | case USB_STAT_STD_HOST_C_S: | |
690 | dev_dbg(di->dev, "USB Type - Standard host is " | |
34c11a70 | 691 | "detected through USB driver\n"); |
f7470b5d | 692 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; |
34c11a70 | 693 | di->is_aca_rid = 0; |
84edbeea AM |
694 | break; |
695 | case USB_STAT_HOST_CHG_HS_CHIRP: | |
f7470b5d | 696 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; |
34c11a70 | 697 | di->is_aca_rid = 0; |
84edbeea AM |
698 | break; |
699 | case USB_STAT_HOST_CHG_HS: | |
f7470b5d | 700 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; |
34c11a70 POH |
701 | di->is_aca_rid = 0; |
702 | break; | |
84edbeea | 703 | case USB_STAT_ACA_RID_C_HS: |
f7470b5d | 704 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P9; |
34c11a70 | 705 | di->is_aca_rid = 0; |
84edbeea AM |
706 | break; |
707 | case USB_STAT_ACA_RID_A: | |
708 | /* | |
709 | * Dedicated charger level minus maximum current accessory | |
34c11a70 | 710 | * can consume (900mA). Closest level is 500mA |
84edbeea | 711 | */ |
34c11a70 | 712 | dev_dbg(di->dev, "USB_STAT_ACA_RID_A detected\n"); |
f7470b5d | 713 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; |
34c11a70 | 714 | di->is_aca_rid = 1; |
84edbeea AM |
715 | break; |
716 | case USB_STAT_ACA_RID_B: | |
717 | /* | |
718 | * Dedicated charger level minus 120mA (20mA for ACA and | |
719 | * 100mA for potential accessory). Closest level is 1300mA | |
720 | */ | |
f7470b5d | 721 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P3; |
74a8e349 | 722 | dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, |
f7470b5d | 723 | di->max_usb_in_curr.usb_type_max); |
34c11a70 | 724 | di->is_aca_rid = 1; |
84edbeea | 725 | break; |
84edbeea | 726 | case USB_STAT_HOST_CHG_NM: |
f7470b5d | 727 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; |
34c11a70 POH |
728 | di->is_aca_rid = 0; |
729 | break; | |
74a8e349 | 730 | case USB_STAT_DEDICATED_CHG: |
f7470b5d | 731 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P5; |
34c11a70 POH |
732 | di->is_aca_rid = 0; |
733 | break; | |
74a8e349 | 734 | case USB_STAT_ACA_RID_C_HS_CHIRP: |
34c11a70 | 735 | case USB_STAT_ACA_RID_C_NM: |
f7470b5d | 736 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P5; |
34c11a70 | 737 | di->is_aca_rid = 1; |
84edbeea | 738 | break; |
4b45f4a9 MC |
739 | case USB_STAT_NOT_CONFIGURED: |
740 | if (di->vbus_detected) { | |
741 | di->usb_device_is_unrecognised = true; | |
742 | dev_dbg(di->dev, "USB Type - Legacy charger.\n"); | |
f7470b5d LJ |
743 | di->max_usb_in_curr.usb_type_max = |
744 | USB_CH_IP_CUR_LVL_1P5; | |
4b45f4a9 MC |
745 | break; |
746 | } | |
84edbeea | 747 | case USB_STAT_HM_IDGND: |
84edbeea | 748 | dev_err(di->dev, "USB Type - Charging not allowed\n"); |
f7470b5d | 749 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05; |
84edbeea AM |
750 | ret = -ENXIO; |
751 | break; | |
74a8e349 HB |
752 | case USB_STAT_RESERVED: |
753 | if (is_ab8500(di->parent)) { | |
754 | di->flags.vbus_collapse = true; | |
755 | dev_err(di->dev, "USB Type - USB_STAT_RESERVED " | |
756 | "VBUS has collapsed\n"); | |
757 | ret = -ENXIO; | |
758 | break; | |
861a30da | 759 | } else { |
74a8e349 | 760 | dev_dbg(di->dev, "USB Type - Charging not allowed\n"); |
f7470b5d LJ |
761 | di->max_usb_in_curr.usb_type_max = |
762 | USB_CH_IP_CUR_LVL_0P05; | |
74a8e349 | 763 | dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", |
f7470b5d LJ |
764 | link_status, |
765 | di->max_usb_in_curr.usb_type_max); | |
74a8e349 HB |
766 | ret = -ENXIO; |
767 | break; | |
768 | } | |
769 | break; | |
770 | case USB_STAT_CARKIT_1: | |
771 | case USB_STAT_CARKIT_2: | |
772 | case USB_STAT_ACA_DOCK_CHARGER: | |
773 | case USB_STAT_CHARGER_LINE_1: | |
f7470b5d | 774 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; |
74a8e349 | 775 | dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, |
f7470b5d | 776 | di->max_usb_in_curr.usb_type_max); |
ed5243f8 | 777 | break; |
ff38090a HS |
778 | case USB_STAT_NOT_VALID_LINK: |
779 | dev_err(di->dev, "USB Type invalid - try charging anyway\n"); | |
f7470b5d | 780 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; |
74a8e349 HB |
781 | break; |
782 | ||
84edbeea AM |
783 | default: |
784 | dev_err(di->dev, "USB Type - Unknown\n"); | |
f7470b5d | 785 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05; |
84edbeea AM |
786 | ret = -ENXIO; |
787 | break; | |
788 | }; | |
789 | ||
f7470b5d | 790 | di->max_usb_in_curr.set_max = di->max_usb_in_curr.usb_type_max; |
84edbeea | 791 | dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", |
f7470b5d | 792 | link_status, di->max_usb_in_curr.set_max); |
84edbeea AM |
793 | |
794 | return ret; | |
795 | } | |
796 | ||
797 | /** | |
798 | * ab8500_charger_read_usb_type() - read the type of usb connected | |
799 | * @di: pointer to the ab8500_charger structure | |
800 | * | |
801 | * Detect the type of the plugged USB | |
802 | * Returns error code in case of failure else 0 on success | |
803 | */ | |
804 | static int ab8500_charger_read_usb_type(struct ab8500_charger *di) | |
805 | { | |
806 | int ret; | |
807 | u8 val; | |
808 | ||
809 | ret = abx500_get_register_interruptible(di->dev, | |
810 | AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, &val); | |
811 | if (ret < 0) { | |
812 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); | |
813 | return ret; | |
814 | } | |
861a30da | 815 | if (is_ab8500(di->parent)) |
74a8e349 | 816 | ret = abx500_get_register_interruptible(di->dev, AB8500_USB, |
861a30da LJ |
817 | AB8500_USB_LINE_STAT_REG, &val); |
818 | else | |
819 | ret = abx500_get_register_interruptible(di->dev, | |
820 | AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val); | |
84edbeea AM |
821 | if (ret < 0) { |
822 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); | |
823 | return ret; | |
824 | } | |
825 | ||
826 | /* get the USB type */ | |
861a30da LJ |
827 | if (is_ab8500(di->parent)) |
828 | val = (val & AB8500_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT; | |
829 | else | |
830 | val = (val & AB8505_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT; | |
84edbeea AM |
831 | ret = ab8500_charger_max_usb_curr(di, |
832 | (enum ab8500_charger_link_status) val); | |
833 | ||
834 | return ret; | |
835 | } | |
836 | ||
837 | /** | |
838 | * ab8500_charger_detect_usb_type() - get the type of usb connected | |
839 | * @di: pointer to the ab8500_charger structure | |
840 | * | |
841 | * Detect the type of the plugged USB | |
842 | * Returns error code in case of failure else 0 on success | |
843 | */ | |
844 | static int ab8500_charger_detect_usb_type(struct ab8500_charger *di) | |
845 | { | |
846 | int i, ret; | |
847 | u8 val; | |
848 | ||
849 | /* | |
850 | * On getting the VBUS rising edge detect interrupt there | |
851 | * is a 250ms delay after which the register UsbLineStatus | |
852 | * is filled with valid data. | |
853 | */ | |
854 | for (i = 0; i < 10; i++) { | |
855 | msleep(250); | |
856 | ret = abx500_get_register_interruptible(di->dev, | |
857 | AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, | |
858 | &val); | |
34c11a70 POH |
859 | dev_dbg(di->dev, "%s AB8500_IT_SOURCE21_REG %x\n", |
860 | __func__, val); | |
84edbeea AM |
861 | if (ret < 0) { |
862 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); | |
863 | return ret; | |
864 | } | |
74a8e349 | 865 | |
861a30da | 866 | if (is_ab8500(di->parent)) |
74a8e349 HB |
867 | ret = abx500_get_register_interruptible(di->dev, |
868 | AB8500_USB, AB8500_USB_LINE_STAT_REG, &val); | |
861a30da | 869 | else |
74a8e349 HB |
870 | ret = abx500_get_register_interruptible(di->dev, |
871 | AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val); | |
84edbeea AM |
872 | if (ret < 0) { |
873 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); | |
874 | return ret; | |
875 | } | |
34c11a70 POH |
876 | dev_dbg(di->dev, "%s AB8500_USB_LINE_STAT_REG %x\n", __func__, |
877 | val); | |
84edbeea AM |
878 | /* |
879 | * Until the IT source register is read the UsbLineStatus | |
880 | * register is not updated, hence doing the same | |
881 | * Revisit this: | |
882 | */ | |
883 | ||
884 | /* get the USB type */ | |
861a30da LJ |
885 | if (is_ab8500(di->parent)) |
886 | val = (val & AB8500_USB_LINK_STATUS) >> | |
887 | USB_LINK_STATUS_SHIFT; | |
888 | else | |
889 | val = (val & AB8505_USB_LINK_STATUS) >> | |
890 | USB_LINK_STATUS_SHIFT; | |
84edbeea AM |
891 | if (val) |
892 | break; | |
893 | } | |
894 | ret = ab8500_charger_max_usb_curr(di, | |
895 | (enum ab8500_charger_link_status) val); | |
896 | ||
897 | return ret; | |
898 | } | |
899 | ||
900 | /* | |
901 | * This array maps the raw hex value to charger voltage used by the AB8500 | |
902 | * Values taken from the UM0836 | |
903 | */ | |
904 | static int ab8500_charger_voltage_map[] = { | |
905 | 3500 , | |
906 | 3525 , | |
907 | 3550 , | |
908 | 3575 , | |
909 | 3600 , | |
910 | 3625 , | |
911 | 3650 , | |
912 | 3675 , | |
913 | 3700 , | |
914 | 3725 , | |
915 | 3750 , | |
916 | 3775 , | |
917 | 3800 , | |
918 | 3825 , | |
919 | 3850 , | |
920 | 3875 , | |
921 | 3900 , | |
922 | 3925 , | |
923 | 3950 , | |
924 | 3975 , | |
925 | 4000 , | |
926 | 4025 , | |
927 | 4050 , | |
928 | 4060 , | |
929 | 4070 , | |
930 | 4080 , | |
931 | 4090 , | |
932 | 4100 , | |
933 | 4110 , | |
934 | 4120 , | |
935 | 4130 , | |
936 | 4140 , | |
937 | 4150 , | |
938 | 4160 , | |
939 | 4170 , | |
940 | 4180 , | |
941 | 4190 , | |
942 | 4200 , | |
943 | 4210 , | |
944 | 4220 , | |
945 | 4230 , | |
946 | 4240 , | |
947 | 4250 , | |
948 | 4260 , | |
949 | 4270 , | |
950 | 4280 , | |
951 | 4290 , | |
952 | 4300 , | |
953 | 4310 , | |
954 | 4320 , | |
955 | 4330 , | |
956 | 4340 , | |
957 | 4350 , | |
958 | 4360 , | |
959 | 4370 , | |
960 | 4380 , | |
961 | 4390 , | |
962 | 4400 , | |
963 | 4410 , | |
964 | 4420 , | |
965 | 4430 , | |
966 | 4440 , | |
967 | 4450 , | |
968 | 4460 , | |
969 | 4470 , | |
970 | 4480 , | |
971 | 4490 , | |
972 | 4500 , | |
973 | 4510 , | |
974 | 4520 , | |
975 | 4530 , | |
976 | 4540 , | |
977 | 4550 , | |
978 | 4560 , | |
979 | 4570 , | |
980 | 4580 , | |
981 | 4590 , | |
982 | 4600 , | |
983 | }; | |
984 | ||
84edbeea AM |
985 | static int ab8500_voltage_to_regval(int voltage) |
986 | { | |
987 | int i; | |
988 | ||
989 | /* Special case for voltage below 3.5V */ | |
990 | if (voltage < ab8500_charger_voltage_map[0]) | |
991 | return LOW_VOLT_REG; | |
992 | ||
993 | for (i = 1; i < ARRAY_SIZE(ab8500_charger_voltage_map); i++) { | |
994 | if (voltage < ab8500_charger_voltage_map[i]) | |
995 | return i - 1; | |
996 | } | |
997 | ||
998 | /* If not last element, return error */ | |
999 | i = ARRAY_SIZE(ab8500_charger_voltage_map) - 1; | |
1000 | if (voltage == ab8500_charger_voltage_map[i]) | |
1001 | return i; | |
1002 | else | |
1003 | return -1; | |
1004 | } | |
1005 | ||
861a30da | 1006 | static int ab8500_current_to_regval(struct ab8500_charger *di, int curr) |
84edbeea AM |
1007 | { |
1008 | int i; | |
1009 | ||
861a30da | 1010 | if (curr < di->bm->chg_output_curr[0]) |
84edbeea AM |
1011 | return 0; |
1012 | ||
861a30da LJ |
1013 | for (i = 0; i < di->bm->n_chg_out_curr; i++) { |
1014 | if (curr < di->bm->chg_output_curr[i]) | |
84edbeea AM |
1015 | return i - 1; |
1016 | } | |
1017 | ||
1018 | /* If not last element, return error */ | |
861a30da LJ |
1019 | i = di->bm->n_chg_out_curr - 1; |
1020 | if (curr == di->bm->chg_output_curr[i]) | |
84edbeea AM |
1021 | return i; |
1022 | else | |
1023 | return -1; | |
1024 | } | |
1025 | ||
861a30da | 1026 | static int ab8500_vbus_in_curr_to_regval(struct ab8500_charger *di, int curr) |
84edbeea AM |
1027 | { |
1028 | int i; | |
1029 | ||
861a30da | 1030 | if (curr < di->bm->chg_input_curr[0]) |
84edbeea AM |
1031 | return 0; |
1032 | ||
861a30da LJ |
1033 | for (i = 0; i < di->bm->n_chg_in_curr; i++) { |
1034 | if (curr < di->bm->chg_input_curr[i]) | |
84edbeea AM |
1035 | return i - 1; |
1036 | } | |
1037 | ||
1038 | /* If not last element, return error */ | |
861a30da LJ |
1039 | i = di->bm->n_chg_in_curr - 1; |
1040 | if (curr == di->bm->chg_input_curr[i]) | |
84edbeea AM |
1041 | return i; |
1042 | else | |
1043 | return -1; | |
1044 | } | |
1045 | ||
1046 | /** | |
1047 | * ab8500_charger_get_usb_cur() - get usb current | |
1048 | * @di: pointer to the ab8500_charger structre | |
1049 | * | |
1050 | * The usb stack provides the maximum current that can be drawn from | |
1051 | * the standard usb host. This will be in mA. | |
1052 | * This function converts current in mA to a value that can be written | |
1053 | * to the register. Returns -1 if charging is not allowed | |
1054 | */ | |
1055 | static int ab8500_charger_get_usb_cur(struct ab8500_charger *di) | |
1056 | { | |
f7470b5d | 1057 | int ret = 0; |
84edbeea AM |
1058 | switch (di->usb_state.usb_current) { |
1059 | case 100: | |
f7470b5d | 1060 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P09; |
84edbeea AM |
1061 | break; |
1062 | case 200: | |
f7470b5d | 1063 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P19; |
84edbeea AM |
1064 | break; |
1065 | case 300: | |
f7470b5d | 1066 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P29; |
84edbeea AM |
1067 | break; |
1068 | case 400: | |
f7470b5d | 1069 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P38; |
84edbeea AM |
1070 | break; |
1071 | case 500: | |
f7470b5d | 1072 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; |
84edbeea AM |
1073 | break; |
1074 | default: | |
f7470b5d LJ |
1075 | di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05; |
1076 | ret = -EPERM; | |
84edbeea AM |
1077 | break; |
1078 | }; | |
f7470b5d LJ |
1079 | di->max_usb_in_curr.set_max = di->max_usb_in_curr.usb_type_max; |
1080 | return ret; | |
1081 | } | |
1082 | ||
1083 | /** | |
1084 | * ab8500_charger_check_continue_stepping() - Check to allow stepping | |
1085 | * @di: pointer to the ab8500_charger structure | |
1086 | * @reg: select what charger register to check | |
1087 | * | |
1088 | * Check if current stepping should be allowed to continue. | |
1089 | * Checks if charger source has not collapsed. If it has, further stepping | |
1090 | * is not allowed. | |
1091 | */ | |
1092 | static bool ab8500_charger_check_continue_stepping(struct ab8500_charger *di, | |
1093 | int reg) | |
1094 | { | |
1095 | if (reg == AB8500_USBCH_IPT_CRNTLVL_REG) | |
1096 | return !di->flags.vbus_drop_end; | |
1097 | else | |
1098 | return true; | |
84edbeea AM |
1099 | } |
1100 | ||
f8e96dff JB |
1101 | /** |
1102 | * ab8500_charger_set_current() - set charger current | |
1103 | * @di: pointer to the ab8500_charger structure | |
1104 | * @ich: charger current, in mA | |
1105 | * @reg: select what charger register to set | |
1106 | * | |
1107 | * Set charger current. | |
1108 | * There is no state machine in the AB to step up/down the charger | |
1109 | * current to avoid dips and spikes on MAIN, VBUS and VBAT when | |
1110 | * charging is started. Instead we need to implement | |
1111 | * this charger current step-up/down here. | |
1112 | * Returns error code in case of failure else 0(on success) | |
1113 | */ | |
1114 | static int ab8500_charger_set_current(struct ab8500_charger *di, | |
1115 | int ich, int reg) | |
1116 | { | |
34c11a70 | 1117 | int ret = 0; |
861a30da | 1118 | int curr_index, prev_curr_index, shift_value, i; |
f8e96dff | 1119 | u8 reg_value; |
34c11a70 POH |
1120 | u32 step_udelay; |
1121 | bool no_stepping = false; | |
1122 | ||
1123 | atomic_inc(&di->current_stepping_sessions); | |
1124 | ||
1125 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, | |
1126 | reg, ®_value); | |
1127 | if (ret < 0) { | |
1128 | dev_err(di->dev, "%s read failed\n", __func__); | |
1129 | goto exit_set_current; | |
1130 | } | |
f8e96dff JB |
1131 | |
1132 | switch (reg) { | |
1133 | case AB8500_MCH_IPT_CURLVL_REG: | |
1134 | shift_value = MAIN_CH_INPUT_CURR_SHIFT; | |
34c11a70 | 1135 | prev_curr_index = (reg_value >> shift_value); |
861a30da | 1136 | curr_index = ab8500_current_to_regval(di, ich); |
34c11a70 POH |
1137 | step_udelay = STEP_UDELAY; |
1138 | if (!di->ac.charger_connected) | |
1139 | no_stepping = true; | |
f8e96dff JB |
1140 | break; |
1141 | case AB8500_USBCH_IPT_CRNTLVL_REG: | |
861a30da LJ |
1142 | if (is_ab8540(di->parent)) |
1143 | shift_value = AB8540_VBUS_IN_CURR_LIM_SHIFT; | |
1144 | else | |
1145 | shift_value = VBUS_IN_CURR_LIM_SHIFT; | |
34c11a70 | 1146 | prev_curr_index = (reg_value >> shift_value); |
861a30da | 1147 | curr_index = ab8500_vbus_in_curr_to_regval(di, ich); |
34c11a70 POH |
1148 | step_udelay = STEP_UDELAY * 100; |
1149 | ||
34c11a70 POH |
1150 | if (!di->usb.charger_connected) |
1151 | no_stepping = true; | |
f8e96dff JB |
1152 | break; |
1153 | case AB8500_CH_OPT_CRNTLVL_REG: | |
1154 | shift_value = 0; | |
34c11a70 | 1155 | prev_curr_index = (reg_value >> shift_value); |
861a30da | 1156 | curr_index = ab8500_current_to_regval(di, ich); |
34c11a70 POH |
1157 | step_udelay = STEP_UDELAY; |
1158 | if (curr_index && (curr_index - prev_curr_index) > 1) | |
1159 | step_udelay *= 100; | |
1160 | ||
1161 | if (!di->usb.charger_connected && !di->ac.charger_connected) | |
1162 | no_stepping = true; | |
1163 | ||
f8e96dff JB |
1164 | break; |
1165 | default: | |
1166 | dev_err(di->dev, "%s current register not valid\n", __func__); | |
34c11a70 POH |
1167 | ret = -ENXIO; |
1168 | goto exit_set_current; | |
f8e96dff JB |
1169 | } |
1170 | ||
1171 | if (curr_index < 0) { | |
1172 | dev_err(di->dev, "requested current limit out-of-range\n"); | |
34c11a70 POH |
1173 | ret = -ENXIO; |
1174 | goto exit_set_current; | |
f8e96dff | 1175 | } |
f8e96dff JB |
1176 | |
1177 | /* only update current if it's been changed */ | |
34c11a70 POH |
1178 | if (prev_curr_index == curr_index) { |
1179 | dev_dbg(di->dev, "%s current not changed for reg: 0x%02x\n", | |
1180 | __func__, reg); | |
1181 | ret = 0; | |
1182 | goto exit_set_current; | |
1183 | } | |
f8e96dff JB |
1184 | |
1185 | dev_dbg(di->dev, "%s set charger current: %d mA for reg: 0x%02x\n", | |
1186 | __func__, ich, reg); | |
1187 | ||
34c11a70 POH |
1188 | if (no_stepping) { |
1189 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, | |
1190 | reg, (u8)curr_index << shift_value); | |
1191 | if (ret) | |
1192 | dev_err(di->dev, "%s write failed\n", __func__); | |
1193 | } else if (prev_curr_index > curr_index) { | |
f8e96dff | 1194 | for (i = prev_curr_index - 1; i >= curr_index; i--) { |
34c11a70 POH |
1195 | dev_dbg(di->dev, "curr change_1 to: %x for 0x%02x\n", |
1196 | (u8) i << shift_value, reg); | |
f8e96dff | 1197 | ret = abx500_set_register_interruptible(di->dev, |
34c11a70 | 1198 | AB8500_CHARGER, reg, (u8)i << shift_value); |
f8e96dff JB |
1199 | if (ret) { |
1200 | dev_err(di->dev, "%s write failed\n", __func__); | |
34c11a70 | 1201 | goto exit_set_current; |
f8e96dff | 1202 | } |
34c11a70 POH |
1203 | if (i != curr_index) |
1204 | usleep_range(step_udelay, step_udelay * 2); | |
f8e96dff JB |
1205 | } |
1206 | } else { | |
f7470b5d LJ |
1207 | bool allow = true; |
1208 | for (i = prev_curr_index + 1; i <= curr_index && allow; i++) { | |
34c11a70 POH |
1209 | dev_dbg(di->dev, "curr change_2 to: %x for 0x%02x\n", |
1210 | (u8)i << shift_value, reg); | |
f8e96dff | 1211 | ret = abx500_set_register_interruptible(di->dev, |
34c11a70 | 1212 | AB8500_CHARGER, reg, (u8)i << shift_value); |
f8e96dff JB |
1213 | if (ret) { |
1214 | dev_err(di->dev, "%s write failed\n", __func__); | |
34c11a70 | 1215 | goto exit_set_current; |
f8e96dff | 1216 | } |
34c11a70 POH |
1217 | if (i != curr_index) |
1218 | usleep_range(step_udelay, step_udelay * 2); | |
f7470b5d LJ |
1219 | |
1220 | allow = ab8500_charger_check_continue_stepping(di, reg); | |
f8e96dff JB |
1221 | } |
1222 | } | |
34c11a70 POH |
1223 | |
1224 | exit_set_current: | |
1225 | atomic_dec(&di->current_stepping_sessions); | |
1226 | ||
f8e96dff JB |
1227 | return ret; |
1228 | } | |
1229 | ||
84edbeea AM |
1230 | /** |
1231 | * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit | |
1232 | * @di: pointer to the ab8500_charger structure | |
1233 | * @ich_in: charger input current limit | |
1234 | * | |
1235 | * Sets the current that can be drawn from the USB host | |
1236 | * Returns error code in case of failure else 0(on success) | |
1237 | */ | |
1238 | static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, | |
1239 | int ich_in) | |
1240 | { | |
84edbeea | 1241 | int min_value; |
34c11a70 | 1242 | int ret; |
84edbeea AM |
1243 | |
1244 | /* We should always use to lowest current limit */ | |
b0284de0 | 1245 | min_value = min(di->bm->chg_params->usb_curr_max, ich_in); |
f7470b5d LJ |
1246 | if (di->max_usb_in_curr.set_max > 0) |
1247 | min_value = min(di->max_usb_in_curr.set_max, min_value); | |
1248 | ||
1249 | if (di->usb_state.usb_current >= 0) | |
1250 | min_value = min(di->usb_state.usb_current, min_value); | |
84edbeea AM |
1251 | |
1252 | switch (min_value) { | |
1253 | case 100: | |
1254 | if (di->vbat < VBAT_TRESH_IP_CUR_RED) | |
1255 | min_value = USB_CH_IP_CUR_LVL_0P05; | |
1256 | break; | |
1257 | case 500: | |
1258 | if (di->vbat < VBAT_TRESH_IP_CUR_RED) | |
1259 | min_value = USB_CH_IP_CUR_LVL_0P45; | |
1260 | break; | |
1261 | default: | |
1262 | break; | |
1263 | } | |
1264 | ||
34c11a70 POH |
1265 | dev_info(di->dev, "VBUS input current limit set to %d mA\n", min_value); |
1266 | ||
1267 | mutex_lock(&di->usb_ipt_crnt_lock); | |
1268 | ret = ab8500_charger_set_current(di, min_value, | |
f8e96dff | 1269 | AB8500_USBCH_IPT_CRNTLVL_REG); |
34c11a70 POH |
1270 | mutex_unlock(&di->usb_ipt_crnt_lock); |
1271 | ||
1272 | return ret; | |
f8e96dff | 1273 | } |
84edbeea | 1274 | |
f8e96dff JB |
1275 | /** |
1276 | * ab8500_charger_set_main_in_curr() - set main charger input current | |
1277 | * @di: pointer to the ab8500_charger structure | |
1278 | * @ich_in: input charger current, in mA | |
1279 | * | |
1280 | * Set main charger input current. | |
1281 | * Returns error code in case of failure else 0(on success) | |
1282 | */ | |
1283 | static int ab8500_charger_set_main_in_curr(struct ab8500_charger *di, | |
1284 | int ich_in) | |
1285 | { | |
1286 | return ab8500_charger_set_current(di, ich_in, | |
1287 | AB8500_MCH_IPT_CURLVL_REG); | |
1288 | } | |
84edbeea | 1289 | |
f8e96dff JB |
1290 | /** |
1291 | * ab8500_charger_set_output_curr() - set charger output current | |
1292 | * @di: pointer to the ab8500_charger structure | |
1293 | * @ich_out: output charger current, in mA | |
1294 | * | |
1295 | * Set charger output current. | |
1296 | * Returns error code in case of failure else 0(on success) | |
1297 | */ | |
1298 | static int ab8500_charger_set_output_curr(struct ab8500_charger *di, | |
1299 | int ich_out) | |
1300 | { | |
1301 | return ab8500_charger_set_current(di, ich_out, | |
1302 | AB8500_CH_OPT_CRNTLVL_REG); | |
84edbeea AM |
1303 | } |
1304 | ||
1305 | /** | |
1306 | * ab8500_charger_led_en() - turn on/off chargign led | |
1307 | * @di: pointer to the ab8500_charger structure | |
1308 | * @on: flag to turn on/off the chargign led | |
1309 | * | |
1310 | * Power ON/OFF charging LED indication | |
1311 | * Returns error code in case of failure else 0(on success) | |
1312 | */ | |
1313 | static int ab8500_charger_led_en(struct ab8500_charger *di, int on) | |
1314 | { | |
1315 | int ret; | |
1316 | ||
1317 | if (on) { | |
1318 | /* Power ON charging LED indicator, set LED current to 5mA */ | |
1319 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, | |
1320 | AB8500_LED_INDICATOR_PWM_CTRL, | |
1321 | (LED_IND_CUR_5MA | LED_INDICATOR_PWM_ENA)); | |
1322 | if (ret) { | |
1323 | dev_err(di->dev, "Power ON LED failed\n"); | |
1324 | return ret; | |
1325 | } | |
1326 | /* LED indicator PWM duty cycle 252/256 */ | |
1327 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, | |
1328 | AB8500_LED_INDICATOR_PWM_DUTY, | |
1329 | LED_INDICATOR_PWM_DUTY_252_256); | |
1330 | if (ret) { | |
1331 | dev_err(di->dev, "Set LED PWM duty cycle failed\n"); | |
1332 | return ret; | |
1333 | } | |
1334 | } else { | |
1335 | /* Power off charging LED indicator */ | |
1336 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, | |
1337 | AB8500_LED_INDICATOR_PWM_CTRL, | |
1338 | LED_INDICATOR_PWM_DIS); | |
1339 | if (ret) { | |
1340 | dev_err(di->dev, "Power-off LED failed\n"); | |
1341 | return ret; | |
1342 | } | |
1343 | } | |
1344 | ||
1345 | return ret; | |
1346 | } | |
1347 | ||
1348 | /** | |
1349 | * ab8500_charger_ac_en() - enable or disable ac charging | |
1350 | * @di: pointer to the ab8500_charger structure | |
1351 | * @enable: enable/disable flag | |
1352 | * @vset: charging voltage | |
1353 | * @iset: charging current | |
1354 | * | |
1355 | * Enable/Disable AC/Mains charging and turns on/off the charging led | |
1356 | * respectively. | |
1357 | **/ | |
1358 | static int ab8500_charger_ac_en(struct ux500_charger *charger, | |
1359 | int enable, int vset, int iset) | |
1360 | { | |
1361 | int ret; | |
1362 | int volt_index; | |
1363 | int curr_index; | |
1364 | int input_curr_index; | |
1365 | u8 overshoot = 0; | |
1366 | ||
1367 | struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger); | |
1368 | ||
1369 | if (enable) { | |
1370 | /* Check if AC is connected */ | |
1371 | if (!di->ac.charger_connected) { | |
1372 | dev_err(di->dev, "AC charger not connected\n"); | |
1373 | return -ENXIO; | |
1374 | } | |
1375 | ||
1376 | /* Enable AC charging */ | |
1377 | dev_dbg(di->dev, "Enable AC: %dmV %dmA\n", vset, iset); | |
1378 | ||
1379 | /* | |
1380 | * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts | |
1381 | * will be triggered everytime we enable the VDD ADC supply. | |
1382 | * This will turn off charging for a short while. | |
1383 | * It can be avoided by having the supply on when | |
1384 | * there is a charger enabled. Normally the VDD ADC supply | |
1385 | * is enabled everytime a GPADC conversion is triggered. We will | |
1386 | * force it to be enabled from this driver to have | |
1387 | * the GPADC module independant of the AB8500 chargers | |
1388 | */ | |
1389 | if (!di->vddadc_en_ac) { | |
1390 | regulator_enable(di->regu); | |
1391 | di->vddadc_en_ac = true; | |
1392 | } | |
1393 | ||
1394 | /* Check if the requested voltage or current is valid */ | |
1395 | volt_index = ab8500_voltage_to_regval(vset); | |
861a30da LJ |
1396 | curr_index = ab8500_current_to_regval(di, iset); |
1397 | input_curr_index = ab8500_current_to_regval(di, | |
b0284de0 | 1398 | di->bm->chg_params->ac_curr_max); |
84edbeea AM |
1399 | if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) { |
1400 | dev_err(di->dev, | |
1401 | "Charger voltage or current too high, " | |
1402 | "charging not started\n"); | |
1403 | return -ENXIO; | |
1404 | } | |
1405 | ||
1406 | /* ChVoltLevel: maximum battery charging voltage */ | |
1407 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, | |
1408 | AB8500_CH_VOLT_LVL_REG, (u8) volt_index); | |
1409 | if (ret) { | |
1410 | dev_err(di->dev, "%s write failed\n", __func__); | |
1411 | return ret; | |
1412 | } | |
1413 | /* MainChInputCurr: current that can be drawn from the charger*/ | |
f8e96dff | 1414 | ret = ab8500_charger_set_main_in_curr(di, |
b0284de0 | 1415 | di->bm->chg_params->ac_curr_max); |
84edbeea | 1416 | if (ret) { |
f8e96dff JB |
1417 | dev_err(di->dev, "%s Failed to set MainChInputCurr\n", |
1418 | __func__); | |
84edbeea AM |
1419 | return ret; |
1420 | } | |
1421 | /* ChOutputCurentLevel: protected output current */ | |
f8e96dff | 1422 | ret = ab8500_charger_set_output_curr(di, iset); |
84edbeea | 1423 | if (ret) { |
f8e96dff JB |
1424 | dev_err(di->dev, "%s " |
1425 | "Failed to set ChOutputCurentLevel\n", | |
1426 | __func__); | |
84edbeea AM |
1427 | return ret; |
1428 | } | |
1429 | ||
1430 | /* Check if VBAT overshoot control should be enabled */ | |
b0284de0 | 1431 | if (!di->bm->enable_overshoot) |
84edbeea AM |
1432 | overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N; |
1433 | ||
1434 | /* Enable Main Charger */ | |
1435 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, | |
1436 | AB8500_MCH_CTRL1, MAIN_CH_ENA | overshoot); | |
1437 | if (ret) { | |
1438 | dev_err(di->dev, "%s write failed\n", __func__); | |
1439 | return ret; | |
1440 | } | |
1441 | ||
1442 | /* Power on charging LED indication */ | |
1443 | ret = ab8500_charger_led_en(di, true); | |
1444 | if (ret < 0) | |
1445 | dev_err(di->dev, "failed to enable LED\n"); | |
1446 | ||
1447 | di->ac.charger_online = 1; | |
1448 | } else { | |
1449 | /* Disable AC charging */ | |
1450 | if (is_ab8500_1p1_or_earlier(di->parent)) { | |
1451 | /* | |
1452 | * For ABB revision 1.0 and 1.1 there is a bug in the | |
1453 | * watchdog logic. That means we have to continously | |
1454 | * kick the charger watchdog even when no charger is | |
1455 | * connected. This is only valid once the AC charger | |
1456 | * has been enabled. This is a bug that is not handled | |
1457 | * by the algorithm and the watchdog have to be kicked | |
1458 | * by the charger driver when the AC charger | |
1459 | * is disabled | |
1460 | */ | |
1461 | if (di->ac_conn) { | |
1462 | queue_delayed_work(di->charger_wq, | |
1463 | &di->kick_wd_work, | |
1464 | round_jiffies(WD_KICK_INTERVAL)); | |
1465 | } | |
1466 | ||
1467 | /* | |
1468 | * We can't turn off charging completely | |
1469 | * due to a bug in AB8500 cut1. | |
1470 | * If we do, charging will not start again. | |
1471 | * That is why we set the lowest voltage | |
1472 | * and current possible | |
1473 | */ | |
1474 | ret = abx500_set_register_interruptible(di->dev, | |
1475 | AB8500_CHARGER, | |
1476 | AB8500_CH_VOLT_LVL_REG, CH_VOL_LVL_3P5); | |
1477 | if (ret) { | |
1478 | dev_err(di->dev, | |
1479 | "%s write failed\n", __func__); | |
1480 | return ret; | |
1481 | } | |
1482 | ||
f8e96dff | 1483 | ret = ab8500_charger_set_output_curr(di, 0); |
84edbeea | 1484 | if (ret) { |
f8e96dff JB |
1485 | dev_err(di->dev, "%s " |
1486 | "Failed to set ChOutputCurentLevel\n", | |
1487 | __func__); | |
84edbeea AM |
1488 | return ret; |
1489 | } | |
1490 | } else { | |
1491 | ret = abx500_set_register_interruptible(di->dev, | |
1492 | AB8500_CHARGER, | |
1493 | AB8500_MCH_CTRL1, 0); | |
1494 | if (ret) { | |
1495 | dev_err(di->dev, | |
1496 | "%s write failed\n", __func__); | |
1497 | return ret; | |
1498 | } | |
1499 | } | |
1500 | ||
1501 | ret = ab8500_charger_led_en(di, false); | |
1502 | if (ret < 0) | |
1503 | dev_err(di->dev, "failed to disable LED\n"); | |
1504 | ||
1505 | di->ac.charger_online = 0; | |
1506 | di->ac.wd_expired = false; | |
1507 | ||
1508 | /* Disable regulator if enabled */ | |
1509 | if (di->vddadc_en_ac) { | |
1510 | regulator_disable(di->regu); | |
1511 | di->vddadc_en_ac = false; | |
1512 | } | |
1513 | ||
1514 | dev_dbg(di->dev, "%s Disabled AC charging\n", __func__); | |
1515 | } | |
1516 | ab8500_power_supply_changed(di, &di->ac_chg.psy); | |
1517 | ||
1518 | return ret; | |
1519 | } | |
1520 | ||
1521 | /** | |
1522 | * ab8500_charger_usb_en() - enable usb charging | |
1523 | * @di: pointer to the ab8500_charger structure | |
1524 | * @enable: enable/disable flag | |
1525 | * @vset: charging voltage | |
1526 | * @ich_out: charger output current | |
1527 | * | |
1528 | * Enable/Disable USB charging and turns on/off the charging led respectively. | |
1529 | * Returns error code in case of failure else 0(on success) | |
1530 | */ | |
1531 | static int ab8500_charger_usb_en(struct ux500_charger *charger, | |
1532 | int enable, int vset, int ich_out) | |
1533 | { | |
1534 | int ret; | |
1535 | int volt_index; | |
1536 | int curr_index; | |
1537 | u8 overshoot = 0; | |
1538 | ||
1539 | struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger); | |
1540 | ||
1541 | if (enable) { | |
1542 | /* Check if USB is connected */ | |
1543 | if (!di->usb.charger_connected) { | |
1544 | dev_err(di->dev, "USB charger not connected\n"); | |
1545 | return -ENXIO; | |
1546 | } | |
1547 | ||
1548 | /* | |
1549 | * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts | |
1550 | * will be triggered everytime we enable the VDD ADC supply. | |
1551 | * This will turn off charging for a short while. | |
1552 | * It can be avoided by having the supply on when | |
1553 | * there is a charger enabled. Normally the VDD ADC supply | |
1554 | * is enabled everytime a GPADC conversion is triggered. We will | |
1555 | * force it to be enabled from this driver to have | |
1556 | * the GPADC module independant of the AB8500 chargers | |
1557 | */ | |
1558 | if (!di->vddadc_en_usb) { | |
1559 | regulator_enable(di->regu); | |
1560 | di->vddadc_en_usb = true; | |
1561 | } | |
1562 | ||
1563 | /* Enable USB charging */ | |
1564 | dev_dbg(di->dev, "Enable USB: %dmV %dmA\n", vset, ich_out); | |
1565 | ||
1566 | /* Check if the requested voltage or current is valid */ | |
1567 | volt_index = ab8500_voltage_to_regval(vset); | |
861a30da | 1568 | curr_index = ab8500_current_to_regval(di, ich_out); |
84edbeea AM |
1569 | if (volt_index < 0 || curr_index < 0) { |
1570 | dev_err(di->dev, | |
1571 | "Charger voltage or current too high, " | |
1572 | "charging not started\n"); | |
1573 | return -ENXIO; | |
1574 | } | |
1575 | ||
1576 | /* ChVoltLevel: max voltage upto which battery can be charged */ | |
1577 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, | |
1578 | AB8500_CH_VOLT_LVL_REG, (u8) volt_index); | |
1579 | if (ret) { | |
1580 | dev_err(di->dev, "%s write failed\n", __func__); | |
1581 | return ret; | |
1582 | } | |
84edbeea | 1583 | /* Check if VBAT overshoot control should be enabled */ |
b0284de0 | 1584 | if (!di->bm->enable_overshoot) |
84edbeea AM |
1585 | overshoot = USB_CHG_NO_OVERSHOOT_ENA_N; |
1586 | ||
1587 | /* Enable USB Charger */ | |
34c11a70 POH |
1588 | dev_dbg(di->dev, |
1589 | "Enabling USB with write to AB8500_USBCH_CTRL1_REG\n"); | |
84edbeea AM |
1590 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, |
1591 | AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot); | |
1592 | if (ret) { | |
1593 | dev_err(di->dev, "%s write failed\n", __func__); | |
1594 | return ret; | |
1595 | } | |
1596 | ||
1597 | /* If success power on charging LED indication */ | |
1598 | ret = ab8500_charger_led_en(di, true); | |
1599 | if (ret < 0) | |
1600 | dev_err(di->dev, "failed to enable LED\n"); | |
1601 | ||
34c11a70 POH |
1602 | di->usb.charger_online = 1; |
1603 | ||
1604 | /* USBChInputCurr: current that can be drawn from the usb */ | |
f7470b5d LJ |
1605 | ret = ab8500_charger_set_vbus_in_curr(di, |
1606 | di->max_usb_in_curr.usb_type_max); | |
34c11a70 POH |
1607 | if (ret) { |
1608 | dev_err(di->dev, "setting USBChInputCurr failed\n"); | |
1609 | return ret; | |
1610 | } | |
1611 | ||
1612 | /* ChOutputCurentLevel: protected output current */ | |
1613 | ret = ab8500_charger_set_output_curr(di, ich_out); | |
1614 | if (ret) { | |
1615 | dev_err(di->dev, "%s " | |
1616 | "Failed to set ChOutputCurentLevel\n", | |
1617 | __func__); | |
1618 | return ret; | |
1619 | } | |
1620 | ||
84edbeea AM |
1621 | queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ); |
1622 | ||
84edbeea AM |
1623 | } else { |
1624 | /* Disable USB charging */ | |
34c11a70 | 1625 | dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); |
84edbeea AM |
1626 | ret = abx500_set_register_interruptible(di->dev, |
1627 | AB8500_CHARGER, | |
1628 | AB8500_USBCH_CTRL1_REG, 0); | |
1629 | if (ret) { | |
1630 | dev_err(di->dev, | |
1631 | "%s write failed\n", __func__); | |
1632 | return ret; | |
1633 | } | |
1634 | ||
1635 | ret = ab8500_charger_led_en(di, false); | |
1636 | if (ret < 0) | |
1637 | dev_err(di->dev, "failed to disable LED\n"); | |
34c11a70 POH |
1638 | /* USBChInputCurr: current that can be drawn from the usb */ |
1639 | ret = ab8500_charger_set_vbus_in_curr(di, 0); | |
1640 | if (ret) { | |
1641 | dev_err(di->dev, "setting USBChInputCurr failed\n"); | |
1642 | return ret; | |
1643 | } | |
84edbeea | 1644 | |
34c11a70 POH |
1645 | /* ChOutputCurentLevel: protected output current */ |
1646 | ret = ab8500_charger_set_output_curr(di, 0); | |
1647 | if (ret) { | |
1648 | dev_err(di->dev, "%s " | |
1649 | "Failed to reset ChOutputCurentLevel\n", | |
1650 | __func__); | |
1651 | return ret; | |
1652 | } | |
84edbeea AM |
1653 | di->usb.charger_online = 0; |
1654 | di->usb.wd_expired = false; | |
1655 | ||
1656 | /* Disable regulator if enabled */ | |
1657 | if (di->vddadc_en_usb) { | |
1658 | regulator_disable(di->regu); | |
1659 | di->vddadc_en_usb = false; | |
1660 | } | |
1661 | ||
1662 | dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); | |
1663 | ||
1664 | /* Cancel any pending Vbat check work */ | |
b09f86db | 1665 | cancel_delayed_work(&di->check_vbat_work); |
84edbeea AM |
1666 | |
1667 | } | |
1668 | ab8500_power_supply_changed(di, &di->usb_chg.psy); | |
1669 | ||
1670 | return ret; | |
1671 | } | |
1672 | ||
8891716e LJ |
1673 | static int ab8500_external_charger_prepare(struct notifier_block *charger_nb, |
1674 | unsigned long event, void *data) | |
1675 | { | |
1676 | int ret; | |
1677 | struct device *dev = data; | |
1678 | /*Toggle External charger control pin*/ | |
1679 | ret = abx500_set_register_interruptible(dev, AB8500_SYS_CTRL1_BLOCK, | |
1680 | AB8500_SYS_CHARGER_CONTROL_REG, | |
1681 | EXTERNAL_CHARGER_DISABLE_REG_VAL); | |
1682 | if (ret < 0) { | |
1683 | dev_err(dev, "write reg failed %d\n", ret); | |
1684 | goto out; | |
1685 | } | |
1686 | ret = abx500_set_register_interruptible(dev, AB8500_SYS_CTRL1_BLOCK, | |
1687 | AB8500_SYS_CHARGER_CONTROL_REG, | |
1688 | EXTERNAL_CHARGER_ENABLE_REG_VAL); | |
1689 | if (ret < 0) | |
1690 | dev_err(dev, "Write reg failed %d\n", ret); | |
1691 | ||
1692 | out: | |
1693 | return ret; | |
1694 | } | |
1695 | ||
4dcdf577 LJ |
1696 | /** |
1697 | * ab8500_charger_usb_check_enable() - enable usb charging | |
1698 | * @charger: pointer to the ux500_charger structure | |
1699 | * @vset: charging voltage | |
1700 | * @iset: charger output current | |
1701 | * | |
1702 | * Check if the VBUS charger has been disconnected and reconnected without | |
1703 | * AB8500 rising an interrupt. Returns 0 on success. | |
1704 | */ | |
1705 | static int ab8500_charger_usb_check_enable(struct ux500_charger *charger, | |
1706 | int vset, int iset) | |
1707 | { | |
1708 | u8 usbch_ctrl1 = 0; | |
1709 | int ret = 0; | |
1710 | ||
1711 | struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger); | |
1712 | ||
1713 | if (!di->usb.charger_connected) | |
1714 | return ret; | |
1715 | ||
1716 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, | |
1717 | AB8500_USBCH_CTRL1_REG, &usbch_ctrl1); | |
1718 | if (ret < 0) { | |
1719 | dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); | |
1720 | return ret; | |
1721 | } | |
1722 | dev_dbg(di->dev, "USB charger ctrl: 0x%02x\n", usbch_ctrl1); | |
1723 | ||
1724 | if (!(usbch_ctrl1 & USB_CH_ENA)) { | |
1725 | dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n"); | |
1726 | ||
1727 | ret = abx500_mask_and_set_register_interruptible(di->dev, | |
1728 | AB8500_CHARGER, AB8500_CHARGER_CTRL, | |
1729 | DROP_COUNT_RESET, DROP_COUNT_RESET); | |
1730 | if (ret < 0) { | |
1731 | dev_err(di->dev, "ab8500 write failed %d\n", __LINE__); | |
1732 | return ret; | |
1733 | } | |
1734 | ||
1735 | ret = ab8500_charger_usb_en(&di->usb_chg, true, vset, iset); | |
1736 | if (ret < 0) { | |
1737 | dev_err(di->dev, "Failed to enable VBUS charger %d\n", | |
1738 | __LINE__); | |
1739 | return ret; | |
1740 | } | |
1741 | } | |
1742 | return ret; | |
1743 | } | |
1744 | ||
1745 | /** | |
1746 | * ab8500_charger_ac_check_enable() - enable usb charging | |
1747 | * @charger: pointer to the ux500_charger structure | |
1748 | * @vset: charging voltage | |
1749 | * @iset: charger output current | |
1750 | * | |
1751 | * Check if the AC charger has been disconnected and reconnected without | |
1752 | * AB8500 rising an interrupt. Returns 0 on success. | |
1753 | */ | |
1754 | static int ab8500_charger_ac_check_enable(struct ux500_charger *charger, | |
1755 | int vset, int iset) | |
1756 | { | |
1757 | u8 mainch_ctrl1 = 0; | |
1758 | int ret = 0; | |
1759 | ||
1760 | struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger); | |
1761 | ||
1762 | if (!di->ac.charger_connected) | |
1763 | return ret; | |
1764 | ||
1765 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, | |
1766 | AB8500_MCH_CTRL1, &mainch_ctrl1); | |
1767 | if (ret < 0) { | |
1768 | dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); | |
1769 | return ret; | |
1770 | } | |
1771 | dev_dbg(di->dev, "AC charger ctrl: 0x%02x\n", mainch_ctrl1); | |
1772 | ||
1773 | if (!(mainch_ctrl1 & MAIN_CH_ENA)) { | |
1774 | dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n"); | |
1775 | ||
1776 | ret = abx500_mask_and_set_register_interruptible(di->dev, | |
1777 | AB8500_CHARGER, AB8500_CHARGER_CTRL, | |
1778 | DROP_COUNT_RESET, DROP_COUNT_RESET); | |
1779 | ||
1780 | if (ret < 0) { | |
1781 | dev_err(di->dev, "ab8500 write failed %d\n", __LINE__); | |
1782 | return ret; | |
1783 | } | |
1784 | ||
1785 | ret = ab8500_charger_ac_en(&di->usb_chg, true, vset, iset); | |
1786 | if (ret < 0) { | |
1787 | dev_err(di->dev, "failed to enable AC charger %d\n", | |
1788 | __LINE__); | |
1789 | return ret; | |
1790 | } | |
1791 | } | |
1792 | return ret; | |
1793 | } | |
1794 | ||
84edbeea AM |
1795 | /** |
1796 | * ab8500_charger_watchdog_kick() - kick charger watchdog | |
1797 | * @di: pointer to the ab8500_charger structure | |
1798 | * | |
1799 | * Kick charger watchdog | |
1800 | * Returns error code in case of failure else 0(on success) | |
1801 | */ | |
1802 | static int ab8500_charger_watchdog_kick(struct ux500_charger *charger) | |
1803 | { | |
1804 | int ret; | |
1805 | struct ab8500_charger *di; | |
1806 | ||
1807 | if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) | |
1808 | di = to_ab8500_charger_ac_device_info(charger); | |
1809 | else if (charger->psy.type == POWER_SUPPLY_TYPE_USB) | |
1810 | di = to_ab8500_charger_usb_device_info(charger); | |
1811 | else | |
1812 | return -ENXIO; | |
1813 | ||
1814 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, | |
1815 | AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); | |
1816 | if (ret) | |
1817 | dev_err(di->dev, "Failed to kick WD!\n"); | |
1818 | ||
1819 | return ret; | |
1820 | } | |
1821 | ||
1822 | /** | |
1823 | * ab8500_charger_update_charger_current() - update charger current | |
1824 | * @di: pointer to the ab8500_charger structure | |
1825 | * | |
1826 | * Update the charger output current for the specified charger | |
1827 | * Returns error code in case of failure else 0(on success) | |
1828 | */ | |
1829 | static int ab8500_charger_update_charger_current(struct ux500_charger *charger, | |
1830 | int ich_out) | |
1831 | { | |
1832 | int ret; | |
84edbeea AM |
1833 | struct ab8500_charger *di; |
1834 | ||
1835 | if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) | |
1836 | di = to_ab8500_charger_ac_device_info(charger); | |
1837 | else if (charger->psy.type == POWER_SUPPLY_TYPE_USB) | |
1838 | di = to_ab8500_charger_usb_device_info(charger); | |
1839 | else | |
1840 | return -ENXIO; | |
1841 | ||
f8e96dff | 1842 | ret = ab8500_charger_set_output_curr(di, ich_out); |
84edbeea | 1843 | if (ret) { |
f8e96dff JB |
1844 | dev_err(di->dev, "%s " |
1845 | "Failed to set ChOutputCurentLevel\n", | |
1846 | __func__); | |
84edbeea AM |
1847 | return ret; |
1848 | } | |
1849 | ||
1850 | /* Reset the main and usb drop input current measurement counter */ | |
1851 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, | |
4dcdf577 | 1852 | AB8500_CHARGER_CTRL, DROP_COUNT_RESET); |
84edbeea AM |
1853 | if (ret) { |
1854 | dev_err(di->dev, "%s write failed\n", __func__); | |
1855 | return ret; | |
1856 | } | |
1857 | ||
1858 | return ret; | |
1859 | } | |
1860 | ||
db43e6c4 LJ |
1861 | /** |
1862 | * ab8540_charger_power_path_enable() - enable usb power path mode | |
1863 | * @charger: pointer to the ux500_charger structure | |
1864 | * @enable: enable/disable flag | |
1865 | * | |
1866 | * Enable or disable the power path for usb mode | |
1867 | * Returns error code in case of failure else 0(on success) | |
1868 | */ | |
1869 | static int ab8540_charger_power_path_enable(struct ux500_charger *charger, | |
1870 | bool enable) | |
1871 | { | |
1872 | int ret; | |
1873 | struct ab8500_charger *di; | |
1874 | ||
1875 | if (charger->psy.type == POWER_SUPPLY_TYPE_USB) | |
1876 | di = to_ab8500_charger_usb_device_info(charger); | |
1877 | else | |
1878 | return -ENXIO; | |
1879 | ||
1880 | ret = abx500_mask_and_set_register_interruptible(di->dev, | |
1881 | AB8500_CHARGER, AB8540_USB_PP_MODE_REG, | |
1882 | BUS_POWER_PATH_MODE_ENA, enable); | |
1883 | if (ret) { | |
1884 | dev_err(di->dev, "%s write failed\n", __func__); | |
1885 | return ret; | |
1886 | } | |
1887 | ||
1888 | return ret; | |
1889 | } | |
1890 | ||
1891 | ||
1892 | /** | |
1893 | * ab8540_charger_usb_pre_chg_enable() - enable usb pre change | |
1894 | * @charger: pointer to the ux500_charger structure | |
1895 | * @enable: enable/disable flag | |
1896 | * | |
1897 | * Enable or disable the pre-chage for usb mode | |
1898 | * Returns error code in case of failure else 0(on success) | |
1899 | */ | |
1900 | static int ab8540_charger_usb_pre_chg_enable(struct ux500_charger *charger, | |
1901 | bool enable) | |
1902 | { | |
1903 | int ret; | |
1904 | struct ab8500_charger *di; | |
1905 | ||
1906 | if (charger->psy.type == POWER_SUPPLY_TYPE_USB) | |
1907 | di = to_ab8500_charger_usb_device_info(charger); | |
1908 | else | |
1909 | return -ENXIO; | |
1910 | ||
1911 | ret = abx500_mask_and_set_register_interruptible(di->dev, | |
1912 | AB8500_CHARGER, AB8540_USB_PP_CHR_REG, | |
1913 | BUS_POWER_PATH_PRECHG_ENA, enable); | |
1914 | if (ret) { | |
1915 | dev_err(di->dev, "%s write failed\n", __func__); | |
1916 | return ret; | |
1917 | } | |
1918 | ||
1919 | return ret; | |
1920 | } | |
1921 | ||
84edbeea AM |
1922 | static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data) |
1923 | { | |
1924 | struct power_supply *psy; | |
1925 | struct power_supply *ext; | |
1926 | struct ab8500_charger *di; | |
1927 | union power_supply_propval ret; | |
1928 | int i, j; | |
1929 | bool psy_found = false; | |
1930 | struct ux500_charger *usb_chg; | |
1931 | ||
1932 | usb_chg = (struct ux500_charger *)data; | |
1933 | psy = &usb_chg->psy; | |
1934 | ||
1935 | di = to_ab8500_charger_usb_device_info(usb_chg); | |
1936 | ||
1937 | ext = dev_get_drvdata(dev); | |
1938 | ||
1939 | /* For all psy where the driver name appears in any supplied_to */ | |
1940 | for (i = 0; i < ext->num_supplicants; i++) { | |
1941 | if (!strcmp(ext->supplied_to[i], psy->name)) | |
1942 | psy_found = true; | |
1943 | } | |
1944 | ||
1945 | if (!psy_found) | |
1946 | return 0; | |
1947 | ||
1948 | /* Go through all properties for the psy */ | |
1949 | for (j = 0; j < ext->num_properties; j++) { | |
1950 | enum power_supply_property prop; | |
1951 | prop = ext->properties[j]; | |
1952 | ||
1953 | if (ext->get_property(ext, prop, &ret)) | |
1954 | continue; | |
1955 | ||
1956 | switch (prop) { | |
1957 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: | |
1958 | switch (ext->type) { | |
1959 | case POWER_SUPPLY_TYPE_BATTERY: | |
1960 | di->vbat = ret.intval / 1000; | |
1961 | break; | |
1962 | default: | |
1963 | break; | |
1964 | } | |
1965 | break; | |
1966 | default: | |
1967 | break; | |
1968 | } | |
1969 | } | |
1970 | return 0; | |
1971 | } | |
1972 | ||
1973 | /** | |
1974 | * ab8500_charger_check_vbat_work() - keep vbus current within spec | |
1975 | * @work pointer to the work_struct structure | |
1976 | * | |
1977 | * Due to a asic bug it is necessary to lower the input current to the vbus | |
1978 | * charger when charging with at some specific levels. This issue is only valid | |
1979 | * for below a certain battery voltage. This function makes sure that the | |
1980 | * the allowed current limit isn't exceeded. | |
1981 | */ | |
1982 | static void ab8500_charger_check_vbat_work(struct work_struct *work) | |
1983 | { | |
1984 | int t = 10; | |
1985 | struct ab8500_charger *di = container_of(work, | |
1986 | struct ab8500_charger, check_vbat_work.work); | |
1987 | ||
1988 | class_for_each_device(power_supply_class, NULL, | |
1989 | &di->usb_chg.psy, ab8500_charger_get_ext_psy_data); | |
1990 | ||
1991 | /* First run old_vbat is 0. */ | |
1992 | if (di->old_vbat == 0) | |
1993 | di->old_vbat = di->vbat; | |
1994 | ||
1995 | if (!((di->old_vbat <= VBAT_TRESH_IP_CUR_RED && | |
1996 | di->vbat <= VBAT_TRESH_IP_CUR_RED) || | |
1997 | (di->old_vbat > VBAT_TRESH_IP_CUR_RED && | |
1998 | di->vbat > VBAT_TRESH_IP_CUR_RED))) { | |
1999 | ||
2000 | dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d," | |
f7470b5d LJ |
2001 | " old: %d\n", di->max_usb_in_curr.usb_type_max, |
2002 | di->vbat, di->old_vbat); | |
2003 | ab8500_charger_set_vbus_in_curr(di, | |
2004 | di->max_usb_in_curr.usb_type_max); | |
84edbeea AM |
2005 | power_supply_changed(&di->usb_chg.psy); |
2006 | } | |
2007 | ||
2008 | di->old_vbat = di->vbat; | |
2009 | ||
2010 | /* | |
2011 | * No need to check the battery voltage every second when not close to | |
2012 | * the threshold. | |
2013 | */ | |
2014 | if (di->vbat < (VBAT_TRESH_IP_CUR_RED + 100) && | |
2015 | (di->vbat > (VBAT_TRESH_IP_CUR_RED - 100))) | |
2016 | t = 1; | |
2017 | ||
2018 | queue_delayed_work(di->charger_wq, &di->check_vbat_work, t * HZ); | |
2019 | } | |
2020 | ||
2021 | /** | |
2022 | * ab8500_charger_check_hw_failure_work() - check main charger failure | |
2023 | * @work: pointer to the work_struct structure | |
2024 | * | |
2025 | * Work queue function for checking the main charger status | |
2026 | */ | |
2027 | static void ab8500_charger_check_hw_failure_work(struct work_struct *work) | |
2028 | { | |
2029 | int ret; | |
2030 | u8 reg_value; | |
2031 | ||
2032 | struct ab8500_charger *di = container_of(work, | |
2033 | struct ab8500_charger, check_hw_failure_work.work); | |
2034 | ||
2035 | /* Check if the status bits for HW failure is still active */ | |
2036 | if (di->flags.mainextchnotok) { | |
2037 | ret = abx500_get_register_interruptible(di->dev, | |
2038 | AB8500_CHARGER, AB8500_CH_STATUS2_REG, ®_value); | |
2039 | if (ret < 0) { | |
2040 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); | |
2041 | return; | |
2042 | } | |
2043 | if (!(reg_value & MAIN_CH_NOK)) { | |
2044 | di->flags.mainextchnotok = false; | |
2045 | ab8500_power_supply_changed(di, &di->ac_chg.psy); | |
2046 | } | |
2047 | } | |
2048 | if (di->flags.vbus_ovv) { | |
2049 | ret = abx500_get_register_interruptible(di->dev, | |
2050 | AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, | |
2051 | ®_value); | |
2052 | if (ret < 0) { | |
2053 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); | |
2054 | return; | |
2055 | } | |
2056 | if (!(reg_value & VBUS_OVV_TH)) { | |
2057 | di->flags.vbus_ovv = false; | |
2058 | ab8500_power_supply_changed(di, &di->usb_chg.psy); | |
2059 | } | |
2060 | } | |
2061 | /* If we still have a failure, schedule a new check */ | |
2062 | if (di->flags.mainextchnotok || di->flags.vbus_ovv) { | |
2063 | queue_delayed_work(di->charger_wq, | |
2064 | &di->check_hw_failure_work, round_jiffies(HZ)); | |
2065 | } | |
2066 | } | |
2067 | ||
2068 | /** | |
2069 | * ab8500_charger_kick_watchdog_work() - kick the watchdog | |
2070 | * @work: pointer to the work_struct structure | |
2071 | * | |
2072 | * Work queue function for kicking the charger watchdog. | |
2073 | * | |
2074 | * For ABB revision 1.0 and 1.1 there is a bug in the watchdog | |
2075 | * logic. That means we have to continously kick the charger | |
2076 | * watchdog even when no charger is connected. This is only | |
2077 | * valid once the AC charger has been enabled. This is | |
2078 | * a bug that is not handled by the algorithm and the | |
2079 | * watchdog have to be kicked by the charger driver | |
2080 | * when the AC charger is disabled | |
2081 | */ | |
2082 | static void ab8500_charger_kick_watchdog_work(struct work_struct *work) | |
2083 | { | |
2084 | int ret; | |
2085 | ||
2086 | struct ab8500_charger *di = container_of(work, | |
2087 | struct ab8500_charger, kick_wd_work.work); | |
2088 | ||
2089 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, | |
2090 | AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); | |
2091 | if (ret) | |
2092 | dev_err(di->dev, "Failed to kick WD!\n"); | |
2093 | ||
2094 | /* Schedule a new watchdog kick */ | |
2095 | queue_delayed_work(di->charger_wq, | |
2096 | &di->kick_wd_work, round_jiffies(WD_KICK_INTERVAL)); | |
2097 | } | |
2098 | ||
2099 | /** | |
2100 | * ab8500_charger_ac_work() - work to get and set main charger status | |
2101 | * @work: pointer to the work_struct structure | |
2102 | * | |
2103 | * Work queue function for checking the main charger status | |
2104 | */ | |
2105 | static void ab8500_charger_ac_work(struct work_struct *work) | |
2106 | { | |
2107 | int ret; | |
2108 | ||
2109 | struct ab8500_charger *di = container_of(work, | |
2110 | struct ab8500_charger, ac_work); | |
2111 | ||
2112 | /* | |
2113 | * Since we can't be sure that the events are received | |
2114 | * synchronously, we have the check if the main charger is | |
2115 | * connected by reading the status register | |
2116 | */ | |
34c11a70 | 2117 | ret = ab8500_charger_detect_chargers(di, false); |
84edbeea AM |
2118 | if (ret < 0) |
2119 | return; | |
2120 | ||
2121 | if (ret & AC_PW_CONN) { | |
2122 | di->ac.charger_connected = 1; | |
2123 | di->ac_conn = true; | |
2124 | } else { | |
2125 | di->ac.charger_connected = 0; | |
2126 | } | |
2127 | ||
2128 | ab8500_power_supply_changed(di, &di->ac_chg.psy); | |
2129 | sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present"); | |
2130 | } | |
2131 | ||
b269fff4 LJ |
2132 | static void ab8500_charger_usb_attached_work(struct work_struct *work) |
2133 | { | |
2134 | struct ab8500_charger *di = container_of(work, | |
2135 | struct ab8500_charger, | |
2136 | usb_charger_attached_work.work); | |
2137 | int usbch = (USB_CH_VBUSDROP | USB_CH_VBUSDETDBNC); | |
2138 | int ret, i; | |
2139 | u8 statval; | |
2140 | ||
2141 | for (i = 0; i < 10; i++) { | |
2142 | ret = abx500_get_register_interruptible(di->dev, | |
2143 | AB8500_CHARGER, | |
2144 | AB8500_CH_USBCH_STAT1_REG, | |
2145 | &statval); | |
2146 | if (ret < 0) { | |
2147 | dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); | |
2148 | goto reschedule; | |
2149 | } | |
2150 | if ((statval & usbch) != usbch) | |
2151 | goto reschedule; | |
2152 | ||
2153 | msleep(CHARGER_STATUS_POLL); | |
2154 | } | |
2155 | ||
2156 | ab8500_charger_usb_en(&di->usb_chg, 0, 0, 0); | |
2157 | ||
2158 | mutex_lock(&di->charger_attached_mutex); | |
2159 | mutex_unlock(&di->charger_attached_mutex); | |
2160 | ||
2161 | return; | |
2162 | ||
2163 | reschedule: | |
2164 | queue_delayed_work(di->charger_wq, | |
2165 | &di->usb_charger_attached_work, | |
2166 | HZ); | |
2167 | } | |
2168 | ||
2169 | static void ab8500_charger_ac_attached_work(struct work_struct *work) | |
2170 | { | |
2171 | ||
2172 | struct ab8500_charger *di = container_of(work, | |
2173 | struct ab8500_charger, | |
2174 | ac_charger_attached_work.work); | |
2175 | int mainch = (MAIN_CH_STATUS2_MAINCHGDROP | | |
2176 | MAIN_CH_STATUS2_MAINCHARGERDETDBNC); | |
2177 | int ret, i; | |
2178 | u8 statval; | |
2179 | ||
2180 | for (i = 0; i < 10; i++) { | |
2181 | ret = abx500_get_register_interruptible(di->dev, | |
2182 | AB8500_CHARGER, | |
2183 | AB8500_CH_STATUS2_REG, | |
2184 | &statval); | |
2185 | if (ret < 0) { | |
2186 | dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); | |
2187 | goto reschedule; | |
2188 | } | |
2189 | ||
2190 | if ((statval & mainch) != mainch) | |
2191 | goto reschedule; | |
2192 | ||
2193 | msleep(CHARGER_STATUS_POLL); | |
2194 | } | |
2195 | ||
2196 | ab8500_charger_ac_en(&di->ac_chg, 0, 0, 0); | |
2197 | queue_work(di->charger_wq, &di->ac_work); | |
2198 | ||
2199 | mutex_lock(&di->charger_attached_mutex); | |
2200 | mutex_unlock(&di->charger_attached_mutex); | |
2201 | ||
2202 | return; | |
2203 | ||
2204 | reschedule: | |
2205 | queue_delayed_work(di->charger_wq, | |
2206 | &di->ac_charger_attached_work, | |
2207 | HZ); | |
2208 | } | |
2209 | ||
84edbeea AM |
2210 | /** |
2211 | * ab8500_charger_detect_usb_type_work() - work to detect USB type | |
2212 | * @work: Pointer to the work_struct structure | |
2213 | * | |
2214 | * Detect the type of USB plugged | |
2215 | */ | |
64eb9b02 | 2216 | static void ab8500_charger_detect_usb_type_work(struct work_struct *work) |
84edbeea AM |
2217 | { |
2218 | int ret; | |
2219 | ||
2220 | struct ab8500_charger *di = container_of(work, | |
2221 | struct ab8500_charger, detect_usb_type_work); | |
2222 | ||
2223 | /* | |
2224 | * Since we can't be sure that the events are received | |
2225 | * synchronously, we have the check if is | |
2226 | * connected by reading the status register | |
2227 | */ | |
34c11a70 | 2228 | ret = ab8500_charger_detect_chargers(di, false); |
84edbeea AM |
2229 | if (ret < 0) |
2230 | return; | |
2231 | ||
2232 | if (!(ret & USB_PW_CONN)) { | |
34c11a70 POH |
2233 | dev_dbg(di->dev, "%s di->vbus_detected = false\n", __func__); |
2234 | di->vbus_detected = false; | |
84edbeea AM |
2235 | ab8500_charger_set_usb_connected(di, false); |
2236 | ab8500_power_supply_changed(di, &di->usb_chg.psy); | |
2237 | } else { | |
34c11a70 POH |
2238 | dev_dbg(di->dev, "%s di->vbus_detected = true\n", __func__); |
2239 | di->vbus_detected = true; | |
84edbeea AM |
2240 | |
2241 | if (is_ab8500_1p1_or_earlier(di->parent)) { | |
2242 | ret = ab8500_charger_detect_usb_type(di); | |
2243 | if (!ret) { | |
2244 | ab8500_charger_set_usb_connected(di, true); | |
2245 | ab8500_power_supply_changed(di, | |
2246 | &di->usb_chg.psy); | |
2247 | } | |
2248 | } else { | |
34c11a70 POH |
2249 | /* |
2250 | * For ABB cut2.0 and onwards we have an IRQ, | |
84edbeea AM |
2251 | * USB_LINK_STATUS that will be triggered when the USB |
2252 | * link status changes. The exception is USB connected | |
2253 | * during startup. Then we don't get a | |
2254 | * USB_LINK_STATUS IRQ | |
2255 | */ | |
2256 | if (di->vbus_detected_start) { | |
2257 | di->vbus_detected_start = false; | |
2258 | ret = ab8500_charger_detect_usb_type(di); | |
2259 | if (!ret) { | |
2260 | ab8500_charger_set_usb_connected(di, | |
2261 | true); | |
2262 | ab8500_power_supply_changed(di, | |
2263 | &di->usb_chg.psy); | |
2264 | } | |
2265 | } | |
2266 | } | |
2267 | } | |
2268 | } | |
2269 | ||
4b45f4a9 | 2270 | /** |
34c11a70 | 2271 | * ab8500_charger_usb_link_attach_work() - work to detect USB type |
4b45f4a9 MC |
2272 | * @work: pointer to the work_struct structure |
2273 | * | |
2274 | * Detect the type of USB plugged | |
2275 | */ | |
2276 | static void ab8500_charger_usb_link_attach_work(struct work_struct *work) | |
2277 | { | |
2278 | struct ab8500_charger *di = | |
2279 | container_of(work, struct ab8500_charger, attach_work.work); | |
2280 | int ret; | |
2281 | ||
2282 | /* Update maximum input current if USB enumeration is not detected */ | |
2283 | if (!di->usb.charger_online) { | |
f7470b5d LJ |
2284 | ret = ab8500_charger_set_vbus_in_curr(di, |
2285 | di->max_usb_in_curr.usb_type_max); | |
4b45f4a9 MC |
2286 | if (ret) |
2287 | return; | |
2288 | } | |
2289 | ||
2290 | ab8500_charger_set_usb_connected(di, true); | |
2291 | ab8500_power_supply_changed(di, &di->usb_chg.psy); | |
2292 | } | |
2293 | ||
84edbeea AM |
2294 | /** |
2295 | * ab8500_charger_usb_link_status_work() - work to detect USB type | |
2296 | * @work: pointer to the work_struct structure | |
2297 | * | |
2298 | * Detect the type of USB plugged | |
2299 | */ | |
2300 | static void ab8500_charger_usb_link_status_work(struct work_struct *work) | |
2301 | { | |
ff38090a | 2302 | int detected_chargers; |
84edbeea | 2303 | int ret; |
ff38090a | 2304 | u8 val; |
d4337660 | 2305 | u8 link_status; |
84edbeea AM |
2306 | |
2307 | struct ab8500_charger *di = container_of(work, | |
2308 | struct ab8500_charger, usb_link_status_work); | |
2309 | ||
2310 | /* | |
2311 | * Since we can't be sure that the events are received | |
2312 | * synchronously, we have the check if is | |
2313 | * connected by reading the status register | |
2314 | */ | |
34c11a70 | 2315 | detected_chargers = ab8500_charger_detect_chargers(di, false); |
ff38090a | 2316 | if (detected_chargers < 0) |
84edbeea AM |
2317 | return; |
2318 | ||
ff38090a HS |
2319 | /* |
2320 | * Some chargers that breaks the USB spec is | |
2321 | * identified as invalid by AB8500 and it refuse | |
2322 | * to start the charging process. but by jumping | |
2323 | * thru a few hoops it can be forced to start. | |
2324 | */ | |
88efdb80 MC |
2325 | if (is_ab8500(di->parent)) |
2326 | ret = abx500_get_register_interruptible(di->dev, AB8500_USB, | |
2327 | AB8500_USB_LINE_STAT_REG, &val); | |
2328 | else | |
2329 | ret = abx500_get_register_interruptible(di->dev, AB8500_USB, | |
2330 | AB8500_USB_LINK1_STAT_REG, &val); | |
2331 | ||
ff38090a HS |
2332 | if (ret >= 0) |
2333 | dev_dbg(di->dev, "UsbLineStatus register = 0x%02x\n", val); | |
2334 | else | |
2335 | dev_dbg(di->dev, "Error reading USB link status\n"); | |
2336 | ||
861a30da | 2337 | if (is_ab8500(di->parent)) |
d4337660 | 2338 | link_status = AB8500_USB_LINK_STATUS; |
861a30da LJ |
2339 | else |
2340 | link_status = AB8505_USB_LINK_STATUS; | |
d4337660 | 2341 | |
ff38090a | 2342 | if (detected_chargers & USB_PW_CONN) { |
861a30da LJ |
2343 | if (((val & link_status) >> USB_LINK_STATUS_SHIFT) == |
2344 | USB_STAT_NOT_VALID_LINK && | |
ff38090a | 2345 | di->invalid_charger_detect_state == 0) { |
861a30da LJ |
2346 | dev_dbg(di->dev, |
2347 | "Invalid charger detected, state= 0\n"); | |
ff38090a HS |
2348 | /*Enable charger*/ |
2349 | abx500_mask_and_set_register_interruptible(di->dev, | |
861a30da LJ |
2350 | AB8500_CHARGER, AB8500_USBCH_CTRL1_REG, |
2351 | USB_CH_ENA, USB_CH_ENA); | |
ff38090a | 2352 | /*Enable charger detection*/ |
b3ea5f45 MC |
2353 | abx500_mask_and_set_register_interruptible(di->dev, |
2354 | AB8500_USB, AB8500_USB_LINE_CTRL2_REG, | |
2355 | USB_CH_DET, USB_CH_DET); | |
ff38090a HS |
2356 | di->invalid_charger_detect_state = 1; |
2357 | /*exit and wait for new link status interrupt.*/ | |
2358 | return; | |
2359 | ||
2360 | } | |
2361 | if (di->invalid_charger_detect_state == 1) { | |
861a30da LJ |
2362 | dev_dbg(di->dev, |
2363 | "Invalid charger detected, state= 1\n"); | |
ff38090a | 2364 | /*Stop charger detection*/ |
b3ea5f45 MC |
2365 | abx500_mask_and_set_register_interruptible(di->dev, |
2366 | AB8500_USB, AB8500_USB_LINE_CTRL2_REG, | |
2367 | USB_CH_DET, 0x00); | |
ff38090a | 2368 | /*Check link status*/ |
88efdb80 MC |
2369 | if (is_ab8500(di->parent)) |
2370 | ret = abx500_get_register_interruptible(di->dev, | |
2371 | AB8500_USB, AB8500_USB_LINE_STAT_REG, | |
2372 | &val); | |
2373 | else | |
2374 | ret = abx500_get_register_interruptible(di->dev, | |
2375 | AB8500_USB, AB8500_USB_LINK1_STAT_REG, | |
2376 | &val); | |
2377 | ||
ff38090a | 2378 | dev_dbg(di->dev, "USB link status= 0x%02x\n", |
861a30da | 2379 | (val & link_status) >> USB_LINK_STATUS_SHIFT); |
ff38090a HS |
2380 | di->invalid_charger_detect_state = 2; |
2381 | } | |
2382 | } else { | |
2383 | di->invalid_charger_detect_state = 0; | |
2384 | } | |
2385 | ||
2386 | if (!(detected_chargers & USB_PW_CONN)) { | |
34c11a70 | 2387 | di->vbus_detected = false; |
84edbeea AM |
2388 | ab8500_charger_set_usb_connected(di, false); |
2389 | ab8500_power_supply_changed(di, &di->usb_chg.psy); | |
4b45f4a9 MC |
2390 | return; |
2391 | } | |
84edbeea | 2392 | |
34c11a70 POH |
2393 | dev_dbg(di->dev,"%s di->vbus_detected = true\n",__func__); |
2394 | di->vbus_detected = true; | |
4b45f4a9 | 2395 | ret = ab8500_charger_read_usb_type(di); |
34c11a70 POH |
2396 | if (ret) { |
2397 | if (ret == -ENXIO) { | |
2398 | /* No valid charger type detected */ | |
2399 | ab8500_charger_set_usb_connected(di, false); | |
2400 | ab8500_power_supply_changed(di, &di->usb_chg.psy); | |
84edbeea | 2401 | } |
34c11a70 POH |
2402 | return; |
2403 | } | |
2404 | ||
2405 | if (di->usb_device_is_unrecognised) { | |
2406 | dev_dbg(di->dev, | |
2407 | "Potential Legacy Charger device. " | |
2408 | "Delay work for %d msec for USB enum " | |
2409 | "to finish", | |
2410 | WAIT_ACA_RID_ENUMERATION); | |
2411 | queue_delayed_work(di->charger_wq, | |
2412 | &di->attach_work, | |
2413 | msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION)); | |
2414 | } else if (di->is_aca_rid == 1) { | |
2415 | /* Only wait once */ | |
2416 | di->is_aca_rid++; | |
2417 | dev_dbg(di->dev, | |
2418 | "%s Wait %d msec for USB enum to finish", | |
2419 | __func__, WAIT_ACA_RID_ENUMERATION); | |
2420 | queue_delayed_work(di->charger_wq, | |
2421 | &di->attach_work, | |
2422 | msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION)); | |
2423 | } else { | |
2424 | queue_delayed_work(di->charger_wq, | |
2425 | &di->attach_work, | |
2426 | 0); | |
84edbeea AM |
2427 | } |
2428 | } | |
2429 | ||
2430 | static void ab8500_charger_usb_state_changed_work(struct work_struct *work) | |
2431 | { | |
2432 | int ret; | |
2433 | unsigned long flags; | |
2434 | ||
2435 | struct ab8500_charger *di = container_of(work, | |
34c11a70 | 2436 | struct ab8500_charger, usb_state_changed_work.work); |
84edbeea | 2437 | |
34c11a70 POH |
2438 | if (!di->vbus_detected) { |
2439 | dev_dbg(di->dev, | |
2440 | "%s !di->vbus_detected\n", | |
2441 | __func__); | |
84edbeea | 2442 | return; |
34c11a70 | 2443 | } |
84edbeea AM |
2444 | |
2445 | spin_lock_irqsave(&di->usb_state.usb_lock, flags); | |
34c11a70 POH |
2446 | di->usb_state.state = di->usb_state.state_tmp; |
2447 | di->usb_state.usb_current = di->usb_state.usb_current_tmp; | |
84edbeea AM |
2448 | spin_unlock_irqrestore(&di->usb_state.usb_lock, flags); |
2449 | ||
84edbeea AM |
2450 | dev_dbg(di->dev, "%s USB state: 0x%02x mA: %d\n", |
2451 | __func__, di->usb_state.state, di->usb_state.usb_current); | |
2452 | ||
2453 | switch (di->usb_state.state) { | |
2454 | case AB8500_BM_USB_STATE_RESET_HS: | |
2455 | case AB8500_BM_USB_STATE_RESET_FS: | |
2456 | case AB8500_BM_USB_STATE_SUSPEND: | |
2457 | case AB8500_BM_USB_STATE_MAX: | |
2458 | ab8500_charger_set_usb_connected(di, false); | |
2459 | ab8500_power_supply_changed(di, &di->usb_chg.psy); | |
2460 | break; | |
2461 | ||
2462 | case AB8500_BM_USB_STATE_RESUME: | |
2463 | /* | |
2464 | * when suspend->resume there should be delay | |
2465 | * of 1sec for enabling charging | |
2466 | */ | |
2467 | msleep(1000); | |
2468 | /* Intentional fall through */ | |
2469 | case AB8500_BM_USB_STATE_CONFIGURED: | |
2470 | /* | |
2471 | * USB is configured, enable charging with the charging | |
2472 | * input current obtained from USB driver | |
2473 | */ | |
2474 | if (!ab8500_charger_get_usb_cur(di)) { | |
2475 | /* Update maximum input current */ | |
2476 | ret = ab8500_charger_set_vbus_in_curr(di, | |
f7470b5d | 2477 | di->max_usb_in_curr.usb_type_max); |
84edbeea AM |
2478 | if (ret) |
2479 | return; | |
2480 | ||
2481 | ab8500_charger_set_usb_connected(di, true); | |
2482 | ab8500_power_supply_changed(di, &di->usb_chg.psy); | |
2483 | } | |
2484 | break; | |
2485 | ||
2486 | default: | |
2487 | break; | |
2488 | }; | |
2489 | } | |
2490 | ||
2491 | /** | |
2492 | * ab8500_charger_check_usbchargernotok_work() - check USB chg not ok status | |
2493 | * @work: pointer to the work_struct structure | |
2494 | * | |
2495 | * Work queue function for checking the USB charger Not OK status | |
2496 | */ | |
2497 | static void ab8500_charger_check_usbchargernotok_work(struct work_struct *work) | |
2498 | { | |
2499 | int ret; | |
2500 | u8 reg_value; | |
2501 | bool prev_status; | |
2502 | ||
2503 | struct ab8500_charger *di = container_of(work, | |
2504 | struct ab8500_charger, check_usbchgnotok_work.work); | |
2505 | ||
2506 | /* Check if the status bit for usbchargernotok is still active */ | |
2507 | ret = abx500_get_register_interruptible(di->dev, | |
2508 | AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, ®_value); | |
2509 | if (ret < 0) { | |
2510 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); | |
2511 | return; | |
2512 | } | |
2513 | prev_status = di->flags.usbchargernotok; | |
2514 | ||
2515 | if (reg_value & VBUS_CH_NOK) { | |
2516 | di->flags.usbchargernotok = true; | |
2517 | /* Check again in 1sec */ | |
2518 | queue_delayed_work(di->charger_wq, | |
2519 | &di->check_usbchgnotok_work, HZ); | |
2520 | } else { | |
2521 | di->flags.usbchargernotok = false; | |
2522 | di->flags.vbus_collapse = false; | |
2523 | } | |
2524 | ||
2525 | if (prev_status != di->flags.usbchargernotok) | |
2526 | ab8500_power_supply_changed(di, &di->usb_chg.psy); | |
2527 | } | |
2528 | ||
2529 | /** | |
2530 | * ab8500_charger_check_main_thermal_prot_work() - check main thermal status | |
2531 | * @work: pointer to the work_struct structure | |
2532 | * | |
2533 | * Work queue function for checking the Main thermal prot status | |
2534 | */ | |
2535 | static void ab8500_charger_check_main_thermal_prot_work( | |
2536 | struct work_struct *work) | |
2537 | { | |
2538 | int ret; | |
2539 | u8 reg_value; | |
2540 | ||
2541 | struct ab8500_charger *di = container_of(work, | |
2542 | struct ab8500_charger, check_main_thermal_prot_work); | |
2543 | ||
2544 | /* Check if the status bit for main_thermal_prot is still active */ | |
2545 | ret = abx500_get_register_interruptible(di->dev, | |
2546 | AB8500_CHARGER, AB8500_CH_STATUS2_REG, ®_value); | |
2547 | if (ret < 0) { | |
2548 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); | |
2549 | return; | |
2550 | } | |
2551 | if (reg_value & MAIN_CH_TH_PROT) | |
2552 | di->flags.main_thermal_prot = true; | |
2553 | else | |
2554 | di->flags.main_thermal_prot = false; | |
2555 | ||
2556 | ab8500_power_supply_changed(di, &di->ac_chg.psy); | |
2557 | } | |
2558 | ||
2559 | /** | |
2560 | * ab8500_charger_check_usb_thermal_prot_work() - check usb thermal status | |
2561 | * @work: pointer to the work_struct structure | |
2562 | * | |
2563 | * Work queue function for checking the USB thermal prot status | |
2564 | */ | |
2565 | static void ab8500_charger_check_usb_thermal_prot_work( | |
2566 | struct work_struct *work) | |
2567 | { | |
2568 | int ret; | |
2569 | u8 reg_value; | |
2570 | ||
2571 | struct ab8500_charger *di = container_of(work, | |
2572 | struct ab8500_charger, check_usb_thermal_prot_work); | |
2573 | ||
2574 | /* Check if the status bit for usb_thermal_prot is still active */ | |
2575 | ret = abx500_get_register_interruptible(di->dev, | |
2576 | AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, ®_value); | |
2577 | if (ret < 0) { | |
2578 | dev_err(di->dev, "%s ab8500 read failed\n", __func__); | |
2579 | return; | |
2580 | } | |
2581 | if (reg_value & USB_CH_TH_PROT) | |
2582 | di->flags.usb_thermal_prot = true; | |
2583 | else | |
2584 | di->flags.usb_thermal_prot = false; | |
2585 | ||
2586 | ab8500_power_supply_changed(di, &di->usb_chg.psy); | |
2587 | } | |
2588 | ||
2589 | /** | |
2590 | * ab8500_charger_mainchunplugdet_handler() - main charger unplugged | |
2591 | * @irq: interrupt number | |
2592 | * @_di: pointer to the ab8500_charger structure | |
2593 | * | |
2594 | * Returns IRQ status(IRQ_HANDLED) | |
2595 | */ | |
2596 | static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di) | |
2597 | { | |
2598 | struct ab8500_charger *di = _di; | |
2599 | ||
2600 | dev_dbg(di->dev, "Main charger unplugged\n"); | |
2601 | queue_work(di->charger_wq, &di->ac_work); | |
2602 | ||
b269fff4 LJ |
2603 | cancel_delayed_work_sync(&di->ac_charger_attached_work); |
2604 | mutex_lock(&di->charger_attached_mutex); | |
2605 | mutex_unlock(&di->charger_attached_mutex); | |
2606 | ||
84edbeea AM |
2607 | return IRQ_HANDLED; |
2608 | } | |
2609 | ||
2610 | /** | |
2611 | * ab8500_charger_mainchplugdet_handler() - main charger plugged | |
2612 | * @irq: interrupt number | |
2613 | * @_di: pointer to the ab8500_charger structure | |
2614 | * | |
2615 | * Returns IRQ status(IRQ_HANDLED) | |
2616 | */ | |
2617 | static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di) | |
2618 | { | |
2619 | struct ab8500_charger *di = _di; | |
2620 | ||
2621 | dev_dbg(di->dev, "Main charger plugged\n"); | |
2622 | queue_work(di->charger_wq, &di->ac_work); | |
2623 | ||
b269fff4 LJ |
2624 | mutex_lock(&di->charger_attached_mutex); |
2625 | mutex_unlock(&di->charger_attached_mutex); | |
261c5136 RV |
2626 | |
2627 | if (is_ab8500(di->parent)) | |
2628 | queue_delayed_work(di->charger_wq, | |
b269fff4 LJ |
2629 | &di->ac_charger_attached_work, |
2630 | HZ); | |
84edbeea AM |
2631 | return IRQ_HANDLED; |
2632 | } | |
2633 | ||
2634 | /** | |
2635 | * ab8500_charger_mainextchnotok_handler() - main charger not ok | |
2636 | * @irq: interrupt number | |
2637 | * @_di: pointer to the ab8500_charger structure | |
2638 | * | |
2639 | * Returns IRQ status(IRQ_HANDLED) | |
2640 | */ | |
2641 | static irqreturn_t ab8500_charger_mainextchnotok_handler(int irq, void *_di) | |
2642 | { | |
2643 | struct ab8500_charger *di = _di; | |
2644 | ||
2645 | dev_dbg(di->dev, "Main charger not ok\n"); | |
2646 | di->flags.mainextchnotok = true; | |
2647 | ab8500_power_supply_changed(di, &di->ac_chg.psy); | |
2648 | ||
2649 | /* Schedule a new HW failure check */ | |
2650 | queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0); | |
2651 | ||
2652 | return IRQ_HANDLED; | |
2653 | } | |
2654 | ||
2655 | /** | |
2656 | * ab8500_charger_mainchthprotr_handler() - Die temp is above main charger | |
2657 | * thermal protection threshold | |
2658 | * @irq: interrupt number | |
2659 | * @_di: pointer to the ab8500_charger structure | |
2660 | * | |
2661 | * Returns IRQ status(IRQ_HANDLED) | |
2662 | */ | |
2663 | static irqreturn_t ab8500_charger_mainchthprotr_handler(int irq, void *_di) | |
2664 | { | |
2665 | struct ab8500_charger *di = _di; | |
2666 | ||
2667 | dev_dbg(di->dev, | |
2668 | "Die temp above Main charger thermal protection threshold\n"); | |
2669 | queue_work(di->charger_wq, &di->check_main_thermal_prot_work); | |
2670 | ||
2671 | return IRQ_HANDLED; | |
2672 | } | |
2673 | ||
2674 | /** | |
2675 | * ab8500_charger_mainchthprotf_handler() - Die temp is below main charger | |
2676 | * thermal protection threshold | |
2677 | * @irq: interrupt number | |
2678 | * @_di: pointer to the ab8500_charger structure | |
2679 | * | |
2680 | * Returns IRQ status(IRQ_HANDLED) | |
2681 | */ | |
2682 | static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di) | |
2683 | { | |
2684 | struct ab8500_charger *di = _di; | |
2685 | ||
2686 | dev_dbg(di->dev, | |
2687 | "Die temp ok for Main charger thermal protection threshold\n"); | |
2688 | queue_work(di->charger_wq, &di->check_main_thermal_prot_work); | |
2689 | ||
2690 | return IRQ_HANDLED; | |
2691 | } | |
2692 | ||
34c11a70 POH |
2693 | static void ab8500_charger_vbus_drop_end_work(struct work_struct *work) |
2694 | { | |
2695 | struct ab8500_charger *di = container_of(work, | |
2696 | struct ab8500_charger, vbus_drop_end_work.work); | |
861a30da | 2697 | int ret, curr; |
f7470b5d | 2698 | u8 reg_value; |
34c11a70 POH |
2699 | |
2700 | di->flags.vbus_drop_end = false; | |
2701 | ||
2702 | /* Reset the drop counter */ | |
2703 | abx500_set_register_interruptible(di->dev, | |
2704 | AB8500_CHARGER, AB8500_CHARGER_CTRL, 0x01); | |
861a30da LJ |
2705 | |
2706 | if (is_ab8540(di->parent)) | |
2707 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, | |
2708 | AB8540_CH_USBCH_STAT3_REG, ®_value); | |
2709 | else | |
2710 | ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, | |
2711 | AB8500_CH_USBCH_STAT2_REG, ®_value); | |
f7470b5d | 2712 | if (ret < 0) { |
861a30da LJ |
2713 | dev_err(di->dev, "%s read failed\n", __func__); |
2714 | return; | |
2715 | } | |
2716 | ||
2717 | if (is_ab8540(di->parent)) | |
2718 | curr = di->bm->chg_input_curr[ | |
2719 | reg_value & AB8540_AUTO_VBUS_IN_CURR_MASK]; | |
2720 | else | |
2721 | curr = di->bm->chg_input_curr[ | |
f7470b5d | 2722 | reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT]; |
861a30da LJ |
2723 | |
2724 | if (di->max_usb_in_curr.calculated_max != curr) { | |
2725 | /* USB source is collapsing */ | |
2726 | di->max_usb_in_curr.calculated_max = curr; | |
2727 | dev_dbg(di->dev, | |
2728 | "VBUS input current limiting to %d mA\n", | |
2729 | di->max_usb_in_curr.calculated_max); | |
2730 | } else { | |
2731 | /* | |
2732 | * USB source can not give more than this amount. | |
2733 | * Taking more will collapse the source. | |
2734 | */ | |
2735 | di->max_usb_in_curr.set_max = | |
2736 | di->max_usb_in_curr.calculated_max; | |
2737 | dev_dbg(di->dev, | |
2738 | "VBUS input current limited to %d mA\n", | |
2739 | di->max_usb_in_curr.set_max); | |
f7470b5d | 2740 | } |
34c11a70 POH |
2741 | |
2742 | if (di->usb.charger_connected) | |
f7470b5d LJ |
2743 | ab8500_charger_set_vbus_in_curr(di, |
2744 | di->max_usb_in_curr.usb_type_max); | |
34c11a70 POH |
2745 | } |
2746 | ||
84edbeea AM |
2747 | /** |
2748 | * ab8500_charger_vbusdetf_handler() - VBUS falling detected | |
2749 | * @irq: interrupt number | |
2750 | * @_di: pointer to the ab8500_charger structure | |
2751 | * | |
2752 | * Returns IRQ status(IRQ_HANDLED) | |
2753 | */ | |
2754 | static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di) | |
2755 | { | |
2756 | struct ab8500_charger *di = _di; | |
2757 | ||
34c11a70 | 2758 | di->vbus_detected = false; |
84edbeea AM |
2759 | dev_dbg(di->dev, "VBUS falling detected\n"); |
2760 | queue_work(di->charger_wq, &di->detect_usb_type_work); | |
2761 | ||
2762 | return IRQ_HANDLED; | |
2763 | } | |
2764 | ||
2765 | /** | |
2766 | * ab8500_charger_vbusdetr_handler() - VBUS rising detected | |
2767 | * @irq: interrupt number | |
2768 | * @_di: pointer to the ab8500_charger structure | |
2769 | * | |
2770 | * Returns IRQ status(IRQ_HANDLED) | |
2771 | */ | |
2772 | static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di) | |
2773 | { | |
2774 | struct ab8500_charger *di = _di; | |
2775 | ||
2776 | di->vbus_detected = true; | |
2777 | dev_dbg(di->dev, "VBUS rising detected\n"); | |
34c11a70 | 2778 | |
84edbeea AM |
2779 | queue_work(di->charger_wq, &di->detect_usb_type_work); |
2780 | ||
2781 | return IRQ_HANDLED; | |
2782 | } | |
2783 | ||
2784 | /** | |
2785 | * ab8500_charger_usblinkstatus_handler() - USB link status has changed | |
2786 | * @irq: interrupt number | |
2787 | * @_di: pointer to the ab8500_charger structure | |
2788 | * | |
2789 | * Returns IRQ status(IRQ_HANDLED) | |
2790 | */ | |
2791 | static irqreturn_t ab8500_charger_usblinkstatus_handler(int irq, void *_di) | |
2792 | { | |
2793 | struct ab8500_charger *di = _di; | |
2794 | ||
2795 | dev_dbg(di->dev, "USB link status changed\n"); | |
2796 | ||
2797 | queue_work(di->charger_wq, &di->usb_link_status_work); | |
2798 | ||
2799 | return IRQ_HANDLED; | |
2800 | } | |
2801 | ||
2802 | /** | |
2803 | * ab8500_charger_usbchthprotr_handler() - Die temp is above usb charger | |
2804 | * thermal protection threshold | |
2805 | * @irq: interrupt number | |
2806 | * @_di: pointer to the ab8500_charger structure | |
2807 | * | |
2808 | * Returns IRQ status(IRQ_HANDLED) | |
2809 | */ | |
2810 | static irqreturn_t ab8500_charger_usbchthprotr_handler(int irq, void *_di) | |
2811 | { | |
2812 | struct ab8500_charger *di = _di; | |
2813 | ||
2814 | dev_dbg(di->dev, | |
2815 | "Die temp above USB charger thermal protection threshold\n"); | |
2816 | queue_work(di->charger_wq, &di->check_usb_thermal_prot_work); | |
2817 | ||
2818 | return IRQ_HANDLED; | |
2819 | } | |
2820 | ||
2821 | /** | |
2822 | * ab8500_charger_usbchthprotf_handler() - Die temp is below usb charger | |
2823 | * thermal protection threshold | |
2824 | * @irq: interrupt number | |
2825 | * @_di: pointer to the ab8500_charger structure | |
2826 | * | |
2827 | * Returns IRQ status(IRQ_HANDLED) | |
2828 | */ | |
2829 | static irqreturn_t ab8500_charger_usbchthprotf_handler(int irq, void *_di) | |
2830 | { | |
2831 | struct ab8500_charger *di = _di; | |
2832 | ||
2833 | dev_dbg(di->dev, | |
2834 | "Die temp ok for USB charger thermal protection threshold\n"); | |
2835 | queue_work(di->charger_wq, &di->check_usb_thermal_prot_work); | |
2836 | ||
2837 | return IRQ_HANDLED; | |
2838 | } | |
2839 | ||
2840 | /** | |
2841 | * ab8500_charger_usbchargernotokr_handler() - USB charger not ok detected | |
2842 | * @irq: interrupt number | |
2843 | * @_di: pointer to the ab8500_charger structure | |
2844 | * | |
2845 | * Returns IRQ status(IRQ_HANDLED) | |
2846 | */ | |
2847 | static irqreturn_t ab8500_charger_usbchargernotokr_handler(int irq, void *_di) | |
2848 | { | |
2849 | struct ab8500_charger *di = _di; | |
2850 | ||
2851 | dev_dbg(di->dev, "Not allowed USB charger detected\n"); | |
2852 | queue_delayed_work(di->charger_wq, &di->check_usbchgnotok_work, 0); | |
2853 | ||
2854 | return IRQ_HANDLED; | |
2855 | } | |
2856 | ||
2857 | /** | |
2858 | * ab8500_charger_chwdexp_handler() - Charger watchdog expired | |
2859 | * @irq: interrupt number | |
2860 | * @_di: pointer to the ab8500_charger structure | |
2861 | * | |
2862 | * Returns IRQ status(IRQ_HANDLED) | |
2863 | */ | |
2864 | static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di) | |
2865 | { | |
2866 | struct ab8500_charger *di = _di; | |
2867 | ||
2868 | dev_dbg(di->dev, "Charger watchdog expired\n"); | |
2869 | ||
2870 | /* | |
2871 | * The charger that was online when the watchdog expired | |
2872 | * needs to be restarted for charging to start again | |
2873 | */ | |
2874 | if (di->ac.charger_online) { | |
2875 | di->ac.wd_expired = true; | |
2876 | ab8500_power_supply_changed(di, &di->ac_chg.psy); | |
2877 | } | |
2878 | if (di->usb.charger_online) { | |
2879 | di->usb.wd_expired = true; | |
2880 | ab8500_power_supply_changed(di, &di->usb_chg.psy); | |
2881 | } | |
2882 | ||
2883 | return IRQ_HANDLED; | |
2884 | } | |
2885 | ||
34c11a70 POH |
2886 | /** |
2887 | * ab8500_charger_vbuschdropend_handler() - VBUS drop removed | |
2888 | * @irq: interrupt number | |
2889 | * @_di: pointer to the ab8500_charger structure | |
2890 | * | |
2891 | * Returns IRQ status(IRQ_HANDLED) | |
2892 | */ | |
2893 | static irqreturn_t ab8500_charger_vbuschdropend_handler(int irq, void *_di) | |
2894 | { | |
2895 | struct ab8500_charger *di = _di; | |
2896 | ||
2897 | dev_dbg(di->dev, "VBUS charger drop ended\n"); | |
2898 | di->flags.vbus_drop_end = true; | |
f7470b5d LJ |
2899 | |
2900 | /* | |
2901 | * VBUS might have dropped due to bad connection. | |
2902 | * Schedule a new input limit set to the value SW requests. | |
2903 | */ | |
34c11a70 | 2904 | queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, |
f7470b5d | 2905 | round_jiffies(VBUS_IN_CURR_LIM_RETRY_SET_TIME * HZ)); |
34c11a70 POH |
2906 | |
2907 | return IRQ_HANDLED; | |
2908 | } | |
2909 | ||
84edbeea AM |
2910 | /** |
2911 | * ab8500_charger_vbusovv_handler() - VBUS overvoltage detected | |
2912 | * @irq: interrupt number | |
2913 | * @_di: pointer to the ab8500_charger structure | |
2914 | * | |
2915 | * Returns IRQ status(IRQ_HANDLED) | |
2916 | */ | |
2917 | static irqreturn_t ab8500_charger_vbusovv_handler(int irq, void *_di) | |
2918 | { | |
2919 | struct ab8500_charger *di = _di; | |
2920 | ||
2921 | dev_dbg(di->dev, "VBUS overvoltage detected\n"); | |
2922 | di->flags.vbus_ovv = true; | |
2923 | ab8500_power_supply_changed(di, &di->usb_chg.psy); | |
2924 | ||
2925 | /* Schedule a new HW failure check */ | |
2926 | queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0); | |
2927 | ||
2928 | return IRQ_HANDLED; | |
2929 | } | |
2930 | ||
2931 | /** | |
2932 | * ab8500_charger_ac_get_property() - get the ac/mains properties | |
2933 | * @psy: pointer to the power_supply structure | |
2934 | * @psp: pointer to the power_supply_property structure | |
2935 | * @val: pointer to the power_supply_propval union | |
2936 | * | |
2937 | * This function gets called when an application tries to get the ac/mains | |
2938 | * properties by reading the sysfs files. | |
2939 | * AC/Mains properties are online, present and voltage. | |
2940 | * online: ac/mains charging is in progress or not | |
2941 | * present: presence of the ac/mains | |
2942 | * voltage: AC/Mains voltage | |
2943 | * Returns error code in case of failure else 0(on success) | |
2944 | */ | |
2945 | static int ab8500_charger_ac_get_property(struct power_supply *psy, | |
2946 | enum power_supply_property psp, | |
2947 | union power_supply_propval *val) | |
2948 | { | |
2949 | struct ab8500_charger *di; | |
a864c5a8 | 2950 | int ret; |
84edbeea AM |
2951 | |
2952 | di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy)); | |
2953 | ||
2954 | switch (psp) { | |
2955 | case POWER_SUPPLY_PROP_HEALTH: | |
2956 | if (di->flags.mainextchnotok) | |
2957 | val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; | |
2958 | else if (di->ac.wd_expired || di->usb.wd_expired) | |
2959 | val->intval = POWER_SUPPLY_HEALTH_DEAD; | |
2960 | else if (di->flags.main_thermal_prot) | |
2961 | val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; | |
2962 | else | |
2963 | val->intval = POWER_SUPPLY_HEALTH_GOOD; | |
2964 | break; | |
2965 | case POWER_SUPPLY_PROP_ONLINE: | |
2966 | val->intval = di->ac.charger_online; | |
2967 | break; | |
2968 | case POWER_SUPPLY_PROP_PRESENT: | |
2969 | val->intval = di->ac.charger_connected; | |
2970 | break; | |
2971 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: | |
a864c5a8 JA |
2972 | ret = ab8500_charger_get_ac_voltage(di); |
2973 | if (ret >= 0) | |
2974 | di->ac.charger_voltage = ret; | |
2975 | /* On error, use previous value */ | |
84edbeea AM |
2976 | val->intval = di->ac.charger_voltage * 1000; |
2977 | break; | |
2978 | case POWER_SUPPLY_PROP_VOLTAGE_AVG: | |
2979 | /* | |
2980 | * This property is used to indicate when CV mode is entered | |
2981 | * for the AC charger | |
2982 | */ | |
2983 | di->ac.cv_active = ab8500_charger_ac_cv(di); | |
2984 | val->intval = di->ac.cv_active; | |
2985 | break; | |
2986 | case POWER_SUPPLY_PROP_CURRENT_NOW: | |
a864c5a8 JA |
2987 | ret = ab8500_charger_get_ac_current(di); |
2988 | if (ret >= 0) | |
2989 | di->ac.charger_current = ret; | |
2990 | val->intval = di->ac.charger_current * 1000; | |
84edbeea AM |
2991 | break; |
2992 | default: | |
2993 | return -EINVAL; | |
2994 | } | |
2995 | return 0; | |
2996 | } | |
2997 | ||
2998 | /** | |
2999 | * ab8500_charger_usb_get_property() - get the usb properties | |
3000 | * @psy: pointer to the power_supply structure | |
3001 | * @psp: pointer to the power_supply_property structure | |
3002 | * @val: pointer to the power_supply_propval union | |
3003 | * | |
3004 | * This function gets called when an application tries to get the usb | |
3005 | * properties by reading the sysfs files. | |
3006 | * USB properties are online, present and voltage. | |
3007 | * online: usb charging is in progress or not | |
3008 | * present: presence of the usb | |
3009 | * voltage: vbus voltage | |
3010 | * Returns error code in case of failure else 0(on success) | |
3011 | */ | |
3012 | static int ab8500_charger_usb_get_property(struct power_supply *psy, | |
3013 | enum power_supply_property psp, | |
3014 | union power_supply_propval *val) | |
3015 | { | |
3016 | struct ab8500_charger *di; | |
a864c5a8 | 3017 | int ret; |
84edbeea AM |
3018 | |
3019 | di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy)); | |
3020 | ||
3021 | switch (psp) { | |
3022 | case POWER_SUPPLY_PROP_HEALTH: | |
3023 | if (di->flags.usbchargernotok) | |
3024 | val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; | |
3025 | else if (di->ac.wd_expired || di->usb.wd_expired) | |
3026 | val->intval = POWER_SUPPLY_HEALTH_DEAD; | |
3027 | else if (di->flags.usb_thermal_prot) | |
3028 | val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; | |
3029 | else if (di->flags.vbus_ovv) | |
3030 | val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; | |
3031 | else | |
3032 | val->intval = POWER_SUPPLY_HEALTH_GOOD; | |
3033 | break; | |
3034 | case POWER_SUPPLY_PROP_ONLINE: | |
3035 | val->intval = di->usb.charger_online; | |
3036 | break; | |
3037 | case POWER_SUPPLY_PROP_PRESENT: | |
3038 | val->intval = di->usb.charger_connected; | |
3039 | break; | |
3040 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: | |
a864c5a8 JA |
3041 | ret = ab8500_charger_get_vbus_voltage(di); |
3042 | if (ret >= 0) | |
3043 | di->usb.charger_voltage = ret; | |
84edbeea AM |
3044 | val->intval = di->usb.charger_voltage * 1000; |
3045 | break; | |
3046 | case POWER_SUPPLY_PROP_VOLTAGE_AVG: | |
3047 | /* | |
3048 | * This property is used to indicate when CV mode is entered | |
3049 | * for the USB charger | |
3050 | */ | |
3051 | di->usb.cv_active = ab8500_charger_usb_cv(di); | |
3052 | val->intval = di->usb.cv_active; | |
3053 | break; | |
3054 | case POWER_SUPPLY_PROP_CURRENT_NOW: | |
a864c5a8 JA |
3055 | ret = ab8500_charger_get_usb_current(di); |
3056 | if (ret >= 0) | |
3057 | di->usb.charger_current = ret; | |
3058 | val->intval = di->usb.charger_current * 1000; | |
84edbeea AM |
3059 | break; |
3060 | case POWER_SUPPLY_PROP_CURRENT_AVG: | |
3061 | /* | |
3062 | * This property is used to indicate when VBUS has collapsed | |
3063 | * due to too high output current from the USB charger | |
3064 | */ | |
3065 | if (di->flags.vbus_collapse) | |
3066 | val->intval = 1; | |
3067 | else | |
3068 | val->intval = 0; | |
3069 | break; | |
3070 | default: | |
3071 | return -EINVAL; | |
3072 | } | |
3073 | return 0; | |
3074 | } | |
3075 | ||
3076 | /** | |
3077 | * ab8500_charger_init_hw_registers() - Set up charger related registers | |
3078 | * @di: pointer to the ab8500_charger structure | |
3079 | * | |
3080 | * Set up charger OVV, watchdog and maximum voltage registers as well as | |
3081 | * charging of the backup battery | |
3082 | */ | |
3083 | static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) | |
3084 | { | |
3085 | int ret = 0; | |
0f4aa401 | 3086 | u8 bup_vch_range = 0, vbup33_vrtcn = 0; |
84edbeea AM |
3087 | |
3088 | /* Setup maximum charger current and voltage for ABB cut2.0 */ | |
3089 | if (!is_ab8500_1p1_or_earlier(di->parent)) { | |
3090 | ret = abx500_set_register_interruptible(di->dev, | |
3091 | AB8500_CHARGER, | |
3092 | AB8500_CH_VOLT_LVL_MAX_REG, CH_VOL_LVL_4P6); | |
3093 | if (ret) { | |
3094 | dev_err(di->dev, | |
3095 | "failed to set CH_VOLT_LVL_MAX_REG\n"); | |
3096 | goto out; | |
3097 | } | |
3098 | ||
861a30da LJ |
3099 | if (is_ab8540(di->parent)) |
3100 | ret = abx500_set_register_interruptible(di->dev, | |
3101 | AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG, | |
3102 | CH_OP_CUR_LVL_2P); | |
3103 | else | |
3104 | ret = abx500_set_register_interruptible(di->dev, | |
3105 | AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG, | |
3106 | CH_OP_CUR_LVL_1P6); | |
84edbeea AM |
3107 | if (ret) { |
3108 | dev_err(di->dev, | |
3109 | "failed to set CH_OPT_CRNTLVL_MAX_REG\n"); | |
3110 | goto out; | |
3111 | } | |
3112 | } | |
3113 | ||
861a30da LJ |
3114 | if (is_ab9540_2p0(di->parent) || is_ab9540_3p0(di->parent) |
3115 | || is_ab8505_2p0(di->parent) || is_ab8540(di->parent)) | |
0ed5107f JA |
3116 | ret = abx500_mask_and_set_register_interruptible(di->dev, |
3117 | AB8500_CHARGER, | |
3118 | AB8500_USBCH_CTRL2_REG, | |
3119 | VBUS_AUTO_IN_CURR_LIM_ENA, | |
3120 | VBUS_AUTO_IN_CURR_LIM_ENA); | |
3121 | else | |
3122 | /* | |
3123 | * VBUS OVV set to 6.3V and enable automatic current limitation | |
3124 | */ | |
3125 | ret = abx500_set_register_interruptible(di->dev, | |
3126 | AB8500_CHARGER, | |
3127 | AB8500_USBCH_CTRL2_REG, | |
3128 | VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA); | |
84edbeea | 3129 | if (ret) { |
0ed5107f JA |
3130 | dev_err(di->dev, |
3131 | "failed to set automatic current limitation\n"); | |
84edbeea AM |
3132 | goto out; |
3133 | } | |
3134 | ||
3135 | /* Enable main watchdog in OTP */ | |
3136 | ret = abx500_set_register_interruptible(di->dev, | |
3137 | AB8500_OTP_EMUL, AB8500_OTP_CONF_15, OTP_ENABLE_WD); | |
3138 | if (ret) { | |
3139 | dev_err(di->dev, "failed to enable main WD in OTP\n"); | |
3140 | goto out; | |
3141 | } | |
3142 | ||
3143 | /* Enable main watchdog */ | |
3144 | ret = abx500_set_register_interruptible(di->dev, | |
3145 | AB8500_SYS_CTRL2_BLOCK, | |
3146 | AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_ENA); | |
3147 | if (ret) { | |
3148 | dev_err(di->dev, "faile to enable main watchdog\n"); | |
3149 | goto out; | |
3150 | } | |
3151 | ||
3152 | /* | |
3153 | * Due to internal synchronisation, Enable and Kick watchdog bits | |
3154 | * cannot be enabled in a single write. | |
3155 | * A minimum delay of 2*32 kHz period (62.5µs) must be inserted | |
3156 | * between writing Enable then Kick bits. | |
3157 | */ | |
3158 | udelay(63); | |
3159 | ||
3160 | /* Kick main watchdog */ | |
3161 | ret = abx500_set_register_interruptible(di->dev, | |
3162 | AB8500_SYS_CTRL2_BLOCK, | |
3163 | AB8500_MAIN_WDOG_CTRL_REG, | |
3164 | (MAIN_WDOG_ENA | MAIN_WDOG_KICK)); | |
3165 | if (ret) { | |
3166 | dev_err(di->dev, "failed to kick main watchdog\n"); | |
3167 | goto out; | |
3168 | } | |
3169 | ||
3170 | /* Disable main watchdog */ | |
3171 | ret = abx500_set_register_interruptible(di->dev, | |
3172 | AB8500_SYS_CTRL2_BLOCK, | |
3173 | AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_DIS); | |
3174 | if (ret) { | |
3175 | dev_err(di->dev, "failed to disable main watchdog\n"); | |
3176 | goto out; | |
3177 | } | |
3178 | ||
3179 | /* Set watchdog timeout */ | |
3180 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, | |
3181 | AB8500_CH_WD_TIMER_REG, WD_TIMER); | |
3182 | if (ret) { | |
3183 | dev_err(di->dev, "failed to set charger watchdog timeout\n"); | |
34c11a70 POH |
3184 | goto out; |
3185 | } | |
3186 | ||
3187 | ret = ab8500_charger_led_en(di, false); | |
3188 | if (ret < 0) { | |
3189 | dev_err(di->dev, "failed to disable LED\n"); | |
3190 | goto out; | |
3191 | } | |
3192 | ||
84edbeea | 3193 | /* Backup battery voltage and current */ |
0f4aa401 YQ |
3194 | if (di->bm->bkup_bat_v > BUP_VCH_SEL_3P1V) |
3195 | bup_vch_range = BUP_VCH_RANGE; | |
3196 | if (di->bm->bkup_bat_v == BUP_VCH_SEL_3P3V) | |
3197 | vbup33_vrtcn = VBUP33_VRTCN; | |
3198 | ||
84edbeea AM |
3199 | ret = abx500_set_register_interruptible(di->dev, |
3200 | AB8500_RTC, | |
3201 | AB8500_RTC_BACKUP_CHG_REG, | |
0f4aa401 | 3202 | (di->bm->bkup_bat_v & 0x3) | di->bm->bkup_bat_i); |
84edbeea AM |
3203 | if (ret) { |
3204 | dev_err(di->dev, "failed to setup backup battery charging\n"); | |
3205 | goto out; | |
3206 | } | |
0f4aa401 YQ |
3207 | if (is_ab8540(di->parent)) { |
3208 | ret = abx500_set_register_interruptible(di->dev, | |
3209 | AB8500_RTC, | |
3210 | AB8500_RTC_CTRL1_REG, | |
3211 | bup_vch_range | vbup33_vrtcn); | |
3212 | if (ret) { | |
861a30da LJ |
3213 | dev_err(di->dev, |
3214 | "failed to setup backup battery charging\n"); | |
0f4aa401 YQ |
3215 | goto out; |
3216 | } | |
3217 | } | |
84edbeea AM |
3218 | |
3219 | /* Enable backup battery charging */ | |
3220 | abx500_mask_and_set_register_interruptible(di->dev, | |
3221 | AB8500_RTC, AB8500_RTC_CTRL_REG, | |
3222 | RTC_BUP_CH_ENA, RTC_BUP_CH_ENA); | |
3223 | if (ret < 0) | |
3224 | dev_err(di->dev, "%s mask and set failed\n", __func__); | |
3225 | ||
db43e6c4 LJ |
3226 | if (is_ab8540(di->parent)) { |
3227 | ret = abx500_mask_and_set_register_interruptible(di->dev, | |
3228 | AB8500_CHARGER, AB8540_USB_PP_MODE_REG, | |
3229 | BUS_VSYS_VOL_SELECT_MASK, BUS_VSYS_VOL_SELECT_3P6V); | |
3230 | if (ret) { | |
861a30da LJ |
3231 | dev_err(di->dev, |
3232 | "failed to setup usb power path vsys voltage\n"); | |
db43e6c4 LJ |
3233 | goto out; |
3234 | } | |
3235 | ret = abx500_mask_and_set_register_interruptible(di->dev, | |
3236 | AB8500_CHARGER, AB8540_USB_PP_CHR_REG, | |
3237 | BUS_PP_PRECHG_CURRENT_MASK, 0); | |
3238 | if (ret) { | |
861a30da LJ |
3239 | dev_err(di->dev, |
3240 | "failed to setup usb power path prechage current\n"); | |
db43e6c4 LJ |
3241 | goto out; |
3242 | } | |
3243 | } | |
3244 | ||
84edbeea AM |
3245 | out: |
3246 | return ret; | |
3247 | } | |
3248 | ||
3249 | /* | |
3250 | * ab8500 charger driver interrupts and their respective isr | |
3251 | */ | |
3252 | static struct ab8500_charger_interrupts ab8500_charger_irq[] = { | |
3253 | {"MAIN_CH_UNPLUG_DET", ab8500_charger_mainchunplugdet_handler}, | |
3254 | {"MAIN_CHARGE_PLUG_DET", ab8500_charger_mainchplugdet_handler}, | |
3255 | {"MAIN_EXT_CH_NOT_OK", ab8500_charger_mainextchnotok_handler}, | |
3256 | {"MAIN_CH_TH_PROT_R", ab8500_charger_mainchthprotr_handler}, | |
3257 | {"MAIN_CH_TH_PROT_F", ab8500_charger_mainchthprotf_handler}, | |
3258 | {"VBUS_DET_F", ab8500_charger_vbusdetf_handler}, | |
3259 | {"VBUS_DET_R", ab8500_charger_vbusdetr_handler}, | |
3260 | {"USB_LINK_STATUS", ab8500_charger_usblinkstatus_handler}, | |
3261 | {"USB_CH_TH_PROT_R", ab8500_charger_usbchthprotr_handler}, | |
3262 | {"USB_CH_TH_PROT_F", ab8500_charger_usbchthprotf_handler}, | |
3263 | {"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler}, | |
3264 | {"VBUS_OVV", ab8500_charger_vbusovv_handler}, | |
3265 | {"CH_WD_EXP", ab8500_charger_chwdexp_handler}, | |
34c11a70 | 3266 | {"VBUS_CH_DROP_END", ab8500_charger_vbuschdropend_handler}, |
84edbeea AM |
3267 | }; |
3268 | ||
3269 | static int ab8500_charger_usb_notifier_call(struct notifier_block *nb, | |
3270 | unsigned long event, void *power) | |
3271 | { | |
3272 | struct ab8500_charger *di = | |
3273 | container_of(nb, struct ab8500_charger, nb); | |
3274 | enum ab8500_usb_state bm_usb_state; | |
3275 | unsigned mA = *((unsigned *)power); | |
3276 | ||
c9ade0fc LJ |
3277 | if (!di) |
3278 | return NOTIFY_DONE; | |
3279 | ||
84edbeea AM |
3280 | if (event != USB_EVENT_VBUS) { |
3281 | dev_dbg(di->dev, "not a standard host, returning\n"); | |
3282 | return NOTIFY_DONE; | |
3283 | } | |
3284 | ||
3285 | /* TODO: State is fabricate here. See if charger really needs USB | |
3286 | * state or if mA is enough | |
3287 | */ | |
3288 | if ((di->usb_state.usb_current == 2) && (mA > 2)) | |
3289 | bm_usb_state = AB8500_BM_USB_STATE_RESUME; | |
3290 | else if (mA == 0) | |
3291 | bm_usb_state = AB8500_BM_USB_STATE_RESET_HS; | |
3292 | else if (mA == 2) | |
3293 | bm_usb_state = AB8500_BM_USB_STATE_SUSPEND; | |
3294 | else if (mA >= 8) /* 8, 100, 500 */ | |
3295 | bm_usb_state = AB8500_BM_USB_STATE_CONFIGURED; | |
3296 | else /* Should never occur */ | |
3297 | bm_usb_state = AB8500_BM_USB_STATE_RESET_FS; | |
3298 | ||
3299 | dev_dbg(di->dev, "%s usb_state: 0x%02x mA: %d\n", | |
3300 | __func__, bm_usb_state, mA); | |
3301 | ||
3302 | spin_lock(&di->usb_state.usb_lock); | |
34c11a70 POH |
3303 | di->usb_state.state_tmp = bm_usb_state; |
3304 | di->usb_state.usb_current_tmp = mA; | |
84edbeea AM |
3305 | spin_unlock(&di->usb_state.usb_lock); |
3306 | ||
34c11a70 POH |
3307 | /* |
3308 | * wait for some time until you get updates from the usb stack | |
3309 | * and negotiations are completed | |
3310 | */ | |
3311 | queue_delayed_work(di->charger_wq, &di->usb_state_changed_work, HZ/2); | |
84edbeea AM |
3312 | |
3313 | return NOTIFY_OK; | |
3314 | } | |
3315 | ||
3316 | #if defined(CONFIG_PM) | |
3317 | static int ab8500_charger_resume(struct platform_device *pdev) | |
3318 | { | |
3319 | int ret; | |
3320 | struct ab8500_charger *di = platform_get_drvdata(pdev); | |
3321 | ||
3322 | /* | |
3323 | * For ABB revision 1.0 and 1.1 there is a bug in the watchdog | |
3324 | * logic. That means we have to continously kick the charger | |
3325 | * watchdog even when no charger is connected. This is only | |
3326 | * valid once the AC charger has been enabled. This is | |
3327 | * a bug that is not handled by the algorithm and the | |
3328 | * watchdog have to be kicked by the charger driver | |
3329 | * when the AC charger is disabled | |
3330 | */ | |
3331 | if (di->ac_conn && is_ab8500_1p1_or_earlier(di->parent)) { | |
3332 | ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, | |
3333 | AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); | |
3334 | if (ret) | |
3335 | dev_err(di->dev, "Failed to kick WD!\n"); | |
3336 | ||
3337 | /* If not already pending start a new timer */ | |
b09f86db LJ |
3338 | queue_delayed_work(di->charger_wq, &di->kick_wd_work, |
3339 | round_jiffies(WD_KICK_INTERVAL)); | |
84edbeea AM |
3340 | } |
3341 | ||
3342 | /* If we still have a HW failure, schedule a new check */ | |
3343 | if (di->flags.mainextchnotok || di->flags.vbus_ovv) { | |
3344 | queue_delayed_work(di->charger_wq, | |
3345 | &di->check_hw_failure_work, 0); | |
3346 | } | |
3347 | ||
34c11a70 POH |
3348 | if (di->flags.vbus_drop_end) |
3349 | queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, 0); | |
3350 | ||
84edbeea AM |
3351 | return 0; |
3352 | } | |
3353 | ||
3354 | static int ab8500_charger_suspend(struct platform_device *pdev, | |
3355 | pm_message_t state) | |
3356 | { | |
3357 | struct ab8500_charger *di = platform_get_drvdata(pdev); | |
3358 | ||
b09f86db LJ |
3359 | /* Cancel any pending jobs */ |
3360 | cancel_delayed_work(&di->check_hw_failure_work); | |
3361 | cancel_delayed_work(&di->vbus_drop_end_work); | |
34c11a70 | 3362 | |
53ef1f59 JA |
3363 | flush_delayed_work(&di->attach_work); |
3364 | flush_delayed_work(&di->usb_charger_attached_work); | |
3365 | flush_delayed_work(&di->ac_charger_attached_work); | |
3366 | flush_delayed_work(&di->check_usbchgnotok_work); | |
3367 | flush_delayed_work(&di->check_vbat_work); | |
3368 | flush_delayed_work(&di->kick_wd_work); | |
3369 | ||
3370 | flush_work(&di->usb_link_status_work); | |
3371 | flush_work(&di->ac_work); | |
3372 | flush_work(&di->detect_usb_type_work); | |
3373 | ||
34c11a70 POH |
3374 | if (atomic_read(&di->current_stepping_sessions)) |
3375 | return -EAGAIN; | |
3376 | ||
84edbeea AM |
3377 | return 0; |
3378 | } | |
3379 | #else | |
3380 | #define ab8500_charger_suspend NULL | |
3381 | #define ab8500_charger_resume NULL | |
3382 | #endif | |
3383 | ||
8891716e LJ |
3384 | static struct notifier_block charger_nb = { |
3385 | .notifier_call = ab8500_external_charger_prepare, | |
3386 | }; | |
3387 | ||
415ec69f | 3388 | static int ab8500_charger_remove(struct platform_device *pdev) |
84edbeea AM |
3389 | { |
3390 | struct ab8500_charger *di = platform_get_drvdata(pdev); | |
3391 | int i, irq, ret; | |
3392 | ||
3393 | /* Disable AC charging */ | |
3394 | ab8500_charger_ac_en(&di->ac_chg, false, 0, 0); | |
3395 | ||
3396 | /* Disable USB charging */ | |
3397 | ab8500_charger_usb_en(&di->usb_chg, false, 0, 0); | |
3398 | ||
3399 | /* Disable interrupts */ | |
3400 | for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) { | |
3401 | irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); | |
3402 | free_irq(irq, di); | |
3403 | } | |
3404 | ||
84edbeea AM |
3405 | /* Backup battery voltage and current disable */ |
3406 | ret = abx500_mask_and_set_register_interruptible(di->dev, | |
3407 | AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0); | |
3408 | if (ret < 0) | |
3409 | dev_err(di->dev, "%s mask and set failed\n", __func__); | |
3410 | ||
efd71c89 | 3411 | usb_unregister_notifier(di->usb_phy, &di->nb); |
721002ec | 3412 | usb_put_phy(di->usb_phy); |
84edbeea AM |
3413 | |
3414 | /* Delete the work queue */ | |
3415 | destroy_workqueue(di->charger_wq); | |
3416 | ||
8891716e LJ |
3417 | /* Unregister external charger enable notifier */ |
3418 | if (!di->ac_chg.enabled) | |
3419 | blocking_notifier_chain_unregister( | |
3420 | &charger_notifier_list, &charger_nb); | |
3421 | ||
84edbeea | 3422 | flush_scheduled_work(); |
72a90ddb | 3423 | if (di->usb_chg.enabled) |
01ec8c54 | 3424 | power_supply_unregister(&di->usb_chg.psy); |
405fea1c MC |
3425 | |
3426 | if (di->ac_chg.enabled && !di->ac_chg.external) | |
01ec8c54 | 3427 | power_supply_unregister(&di->ac_chg.psy); |
405fea1c | 3428 | |
84edbeea AM |
3429 | return 0; |
3430 | } | |
3431 | ||
4aef72db R |
3432 | static char *supply_interface[] = { |
3433 | "ab8500_chargalg", | |
3434 | "ab8500_fg", | |
3435 | "ab8500_btemp", | |
3436 | }; | |
3437 | ||
c8afa640 | 3438 | static int ab8500_charger_probe(struct platform_device *pdev) |
84edbeea | 3439 | { |
4aef72db | 3440 | struct device_node *np = pdev->dev.of_node; |
7722b799 | 3441 | struct abx500_bm_data *plat = pdev->dev.platform_data; |
2aac3de1 | 3442 | struct ab8500_charger *di; |
b269fff4 | 3443 | int irq, i, charger_status, ret = 0, ch_stat; |
84edbeea | 3444 | |
4aef72db R |
3445 | di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); |
3446 | if (!di) { | |
3447 | dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__); | |
84edbeea | 3448 | return -ENOMEM; |
4aef72db | 3449 | } |
7722b799 LJ |
3450 | |
3451 | if (!plat) { | |
3452 | dev_err(&pdev->dev, "no battery management data supplied\n"); | |
3453 | return -EINVAL; | |
3454 | } | |
3455 | di->bm = plat; | |
3456 | ||
3457 | if (np) { | |
3458 | ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); | |
3459 | if (ret) { | |
3460 | dev_err(&pdev->dev, "failed to get battery information\n"); | |
3461 | return ret; | |
4aef72db | 3462 | } |
7722b799 LJ |
3463 | di->autopower_cfg = of_property_read_bool(np, "autopower_cfg"); |
3464 | } else | |
4aef72db | 3465 | di->autopower_cfg = false; |
84edbeea AM |
3466 | |
3467 | /* get parent data */ | |
3468 | di->dev = &pdev->dev; | |
3469 | di->parent = dev_get_drvdata(pdev->dev.parent); | |
3470 | di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); | |
3471 | ||
3472 | /* initialize lock */ | |
3473 | spin_lock_init(&di->usb_state.usb_lock); | |
34c11a70 | 3474 | mutex_init(&di->usb_ipt_crnt_lock); |
84edbeea | 3475 | |
84edbeea | 3476 | di->autopower = false; |
ff38090a | 3477 | di->invalid_charger_detect_state = 0; |
84edbeea AM |
3478 | |
3479 | /* AC supply */ | |
3480 | /* power_supply base class */ | |
3481 | di->ac_chg.psy.name = "ab8500_ac"; | |
3482 | di->ac_chg.psy.type = POWER_SUPPLY_TYPE_MAINS; | |
3483 | di->ac_chg.psy.properties = ab8500_charger_ac_props; | |
3484 | di->ac_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_ac_props); | |
3485 | di->ac_chg.psy.get_property = ab8500_charger_ac_get_property; | |
4aef72db R |
3486 | di->ac_chg.psy.supplied_to = supply_interface; |
3487 | di->ac_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface), | |
84edbeea AM |
3488 | /* ux500_charger sub-class */ |
3489 | di->ac_chg.ops.enable = &ab8500_charger_ac_en; | |
4dcdf577 | 3490 | di->ac_chg.ops.check_enable = &ab8500_charger_ac_check_enable; |
84edbeea AM |
3491 | di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; |
3492 | di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current; | |
3493 | di->ac_chg.max_out_volt = ab8500_charger_voltage_map[ | |
3494 | ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; | |
861a30da LJ |
3495 | di->ac_chg.max_out_curr = |
3496 | di->bm->chg_output_curr[di->bm->n_chg_out_curr - 1]; | |
e07a5645 | 3497 | di->ac_chg.wdt_refresh = CHG_WD_INTERVAL; |
97034a1e | 3498 | di->ac_chg.enabled = di->bm->ac_enabled; |
e07a5645 | 3499 | di->ac_chg.external = false; |
84edbeea | 3500 | |
8891716e LJ |
3501 | /*notifier for external charger enabling*/ |
3502 | if (!di->ac_chg.enabled) | |
3503 | blocking_notifier_chain_register( | |
3504 | &charger_notifier_list, &charger_nb); | |
3505 | ||
84edbeea AM |
3506 | /* USB supply */ |
3507 | /* power_supply base class */ | |
3508 | di->usb_chg.psy.name = "ab8500_usb"; | |
3509 | di->usb_chg.psy.type = POWER_SUPPLY_TYPE_USB; | |
3510 | di->usb_chg.psy.properties = ab8500_charger_usb_props; | |
3511 | di->usb_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_usb_props); | |
3512 | di->usb_chg.psy.get_property = ab8500_charger_usb_get_property; | |
4aef72db R |
3513 | di->usb_chg.psy.supplied_to = supply_interface; |
3514 | di->usb_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface), | |
84edbeea AM |
3515 | /* ux500_charger sub-class */ |
3516 | di->usb_chg.ops.enable = &ab8500_charger_usb_en; | |
4dcdf577 | 3517 | di->usb_chg.ops.check_enable = &ab8500_charger_usb_check_enable; |
84edbeea AM |
3518 | di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; |
3519 | di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current; | |
db43e6c4 LJ |
3520 | di->usb_chg.ops.pp_enable = &ab8540_charger_power_path_enable; |
3521 | di->usb_chg.ops.pre_chg_enable = &ab8540_charger_usb_pre_chg_enable; | |
84edbeea AM |
3522 | di->usb_chg.max_out_volt = ab8500_charger_voltage_map[ |
3523 | ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; | |
861a30da LJ |
3524 | di->usb_chg.max_out_curr = |
3525 | di->bm->chg_output_curr[di->bm->n_chg_out_curr - 1]; | |
e07a5645 | 3526 | di->usb_chg.wdt_refresh = CHG_WD_INTERVAL; |
97034a1e | 3527 | di->usb_chg.enabled = di->bm->usb_enabled; |
e07a5645 | 3528 | di->usb_chg.external = false; |
db43e6c4 | 3529 | di->usb_chg.power_path = di->bm->usb_power_path; |
f7470b5d | 3530 | di->usb_state.usb_current = -1; |
84edbeea AM |
3531 | |
3532 | /* Create a work queue for the charger */ | |
3533 | di->charger_wq = | |
3534 | create_singlethread_workqueue("ab8500_charger_wq"); | |
3535 | if (di->charger_wq == NULL) { | |
3536 | dev_err(di->dev, "failed to create work queue\n"); | |
4aef72db | 3537 | return -ENOMEM; |
84edbeea AM |
3538 | } |
3539 | ||
b269fff4 LJ |
3540 | mutex_init(&di->charger_attached_mutex); |
3541 | ||
84edbeea | 3542 | /* Init work for HW failure check */ |
203b42f7 | 3543 | INIT_DEFERRABLE_WORK(&di->check_hw_failure_work, |
84edbeea | 3544 | ab8500_charger_check_hw_failure_work); |
203b42f7 | 3545 | INIT_DEFERRABLE_WORK(&di->check_usbchgnotok_work, |
84edbeea AM |
3546 | ab8500_charger_check_usbchargernotok_work); |
3547 | ||
b269fff4 LJ |
3548 | INIT_DELAYED_WORK(&di->ac_charger_attached_work, |
3549 | ab8500_charger_ac_attached_work); | |
3550 | INIT_DELAYED_WORK(&di->usb_charger_attached_work, | |
3551 | ab8500_charger_usb_attached_work); | |
3552 | ||
84edbeea AM |
3553 | /* |
3554 | * For ABB revision 1.0 and 1.1 there is a bug in the watchdog | |
3555 | * logic. That means we have to continously kick the charger | |
3556 | * watchdog even when no charger is connected. This is only | |
3557 | * valid once the AC charger has been enabled. This is | |
3558 | * a bug that is not handled by the algorithm and the | |
3559 | * watchdog have to be kicked by the charger driver | |
3560 | * when the AC charger is disabled | |
3561 | */ | |
203b42f7 | 3562 | INIT_DEFERRABLE_WORK(&di->kick_wd_work, |
84edbeea AM |
3563 | ab8500_charger_kick_watchdog_work); |
3564 | ||
203b42f7 | 3565 | INIT_DEFERRABLE_WORK(&di->check_vbat_work, |
84edbeea AM |
3566 | ab8500_charger_check_vbat_work); |
3567 | ||
4b45f4a9 MC |
3568 | INIT_DELAYED_WORK(&di->attach_work, |
3569 | ab8500_charger_usb_link_attach_work); | |
3570 | ||
34c11a70 POH |
3571 | INIT_DELAYED_WORK(&di->usb_state_changed_work, |
3572 | ab8500_charger_usb_state_changed_work); | |
3573 | ||
3574 | INIT_DELAYED_WORK(&di->vbus_drop_end_work, | |
3575 | ab8500_charger_vbus_drop_end_work); | |
3576 | ||
84edbeea AM |
3577 | /* Init work for charger detection */ |
3578 | INIT_WORK(&di->usb_link_status_work, | |
3579 | ab8500_charger_usb_link_status_work); | |
3580 | INIT_WORK(&di->ac_work, ab8500_charger_ac_work); | |
3581 | INIT_WORK(&di->detect_usb_type_work, | |
3582 | ab8500_charger_detect_usb_type_work); | |
3583 | ||
84edbeea AM |
3584 | /* Init work for checking HW status */ |
3585 | INIT_WORK(&di->check_main_thermal_prot_work, | |
3586 | ab8500_charger_check_main_thermal_prot_work); | |
3587 | INIT_WORK(&di->check_usb_thermal_prot_work, | |
3588 | ab8500_charger_check_usb_thermal_prot_work); | |
3589 | ||
3590 | /* | |
3591 | * VDD ADC supply needs to be enabled from this driver when there | |
3592 | * is a charger connected to avoid erroneous BTEMP_HIGH/LOW | |
3593 | * interrupts during charging | |
3594 | */ | |
8feffd10 | 3595 | di->regu = devm_regulator_get(di->dev, "vddadc"); |
84edbeea AM |
3596 | if (IS_ERR(di->regu)) { |
3597 | ret = PTR_ERR(di->regu); | |
3598 | dev_err(di->dev, "failed to get vddadc regulator\n"); | |
3599 | goto free_charger_wq; | |
3600 | } | |
3601 | ||
3602 | ||
3603 | /* Initialize OVV, and other registers */ | |
3604 | ret = ab8500_charger_init_hw_registers(di); | |
3605 | if (ret) { | |
3606 | dev_err(di->dev, "failed to initialize ABB registers\n"); | |
8feffd10 | 3607 | goto free_charger_wq; |
84edbeea AM |
3608 | } |
3609 | ||
3610 | /* Register AC charger class */ | |
72a90ddb | 3611 | if (di->ac_chg.enabled) { |
01ec8c54 MJ |
3612 | ret = power_supply_register(di->dev, &di->ac_chg.psy); |
3613 | if (ret) { | |
3614 | dev_err(di->dev, "failed to register AC charger\n"); | |
3615 | goto free_charger_wq; | |
3616 | } | |
84edbeea AM |
3617 | } |
3618 | ||
3619 | /* Register USB charger class */ | |
72a90ddb | 3620 | if (di->usb_chg.enabled) { |
01ec8c54 MJ |
3621 | ret = power_supply_register(di->dev, &di->usb_chg.psy); |
3622 | if (ret) { | |
3623 | dev_err(di->dev, "failed to register USB charger\n"); | |
3624 | goto free_ac; | |
3625 | } | |
84edbeea AM |
3626 | } |
3627 | ||
662dca54 | 3628 | di->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2); |
ded017ee | 3629 | if (IS_ERR_OR_NULL(di->usb_phy)) { |
efd71c89 | 3630 | dev_err(di->dev, "failed to get usb transceiver\n"); |
84edbeea AM |
3631 | ret = -EINVAL; |
3632 | goto free_usb; | |
3633 | } | |
3634 | di->nb.notifier_call = ab8500_charger_usb_notifier_call; | |
efd71c89 | 3635 | ret = usb_register_notifier(di->usb_phy, &di->nb); |
84edbeea | 3636 | if (ret) { |
efd71c89 AV |
3637 | dev_err(di->dev, "failed to register usb notifier\n"); |
3638 | goto put_usb_phy; | |
84edbeea AM |
3639 | } |
3640 | ||
3641 | /* Identify the connected charger types during startup */ | |
34c11a70 | 3642 | charger_status = ab8500_charger_detect_chargers(di, true); |
84edbeea AM |
3643 | if (charger_status & AC_PW_CONN) { |
3644 | di->ac.charger_connected = 1; | |
3645 | di->ac_conn = true; | |
3646 | ab8500_power_supply_changed(di, &di->ac_chg.psy); | |
3647 | sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present"); | |
3648 | } | |
3649 | ||
3650 | if (charger_status & USB_PW_CONN) { | |
84edbeea AM |
3651 | di->vbus_detected = true; |
3652 | di->vbus_detected_start = true; | |
3653 | queue_work(di->charger_wq, | |
3654 | &di->detect_usb_type_work); | |
3655 | } | |
3656 | ||
3657 | /* Register interrupts */ | |
3658 | for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) { | |
3659 | irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); | |
3660 | ret = request_threaded_irq(irq, NULL, ab8500_charger_irq[i].isr, | |
3661 | IRQF_SHARED | IRQF_NO_SUSPEND, | |
3662 | ab8500_charger_irq[i].name, di); | |
3663 | ||
3664 | if (ret != 0) { | |
3665 | dev_err(di->dev, "failed to request %s IRQ %d: %d\n" | |
3666 | , ab8500_charger_irq[i].name, irq, ret); | |
3667 | goto free_irq; | |
3668 | } | |
3669 | dev_dbg(di->dev, "Requested %s IRQ %d: %d\n", | |
3670 | ab8500_charger_irq[i].name, irq, ret); | |
3671 | } | |
3672 | ||
3673 | platform_set_drvdata(pdev, di); | |
3674 | ||
b269fff4 LJ |
3675 | mutex_lock(&di->charger_attached_mutex); |
3676 | ||
34c11a70 | 3677 | ch_stat = ab8500_charger_detect_chargers(di, false); |
b269fff4 LJ |
3678 | |
3679 | if ((ch_stat & AC_PW_CONN) == AC_PW_CONN) { | |
261c5136 RV |
3680 | if (is_ab8500(di->parent)) |
3681 | queue_delayed_work(di->charger_wq, | |
3682 | &di->ac_charger_attached_work, | |
3683 | HZ); | |
b269fff4 LJ |
3684 | } |
3685 | if ((ch_stat & USB_PW_CONN) == USB_PW_CONN) { | |
261c5136 RV |
3686 | if (is_ab8500(di->parent)) |
3687 | queue_delayed_work(di->charger_wq, | |
3688 | &di->usb_charger_attached_work, | |
3689 | HZ); | |
b269fff4 LJ |
3690 | } |
3691 | ||
3692 | mutex_unlock(&di->charger_attached_mutex); | |
3693 | ||
84edbeea AM |
3694 | return ret; |
3695 | ||
3696 | free_irq: | |
efd71c89 | 3697 | usb_unregister_notifier(di->usb_phy, &di->nb); |
84edbeea AM |
3698 | |
3699 | /* We also have to free all successfully registered irqs */ | |
3700 | for (i = i - 1; i >= 0; i--) { | |
3701 | irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); | |
3702 | free_irq(irq, di); | |
3703 | } | |
efd71c89 | 3704 | put_usb_phy: |
721002ec | 3705 | usb_put_phy(di->usb_phy); |
84edbeea | 3706 | free_usb: |
72a90ddb | 3707 | if (di->usb_chg.enabled) |
01ec8c54 | 3708 | power_supply_unregister(&di->usb_chg.psy); |
84edbeea | 3709 | free_ac: |
72a90ddb | 3710 | if (di->ac_chg.enabled) |
01ec8c54 | 3711 | power_supply_unregister(&di->ac_chg.psy); |
84edbeea AM |
3712 | free_charger_wq: |
3713 | destroy_workqueue(di->charger_wq); | |
84edbeea AM |
3714 | return ret; |
3715 | } | |
3716 | ||
4aef72db R |
3717 | static const struct of_device_id ab8500_charger_match[] = { |
3718 | { .compatible = "stericsson,ab8500-charger", }, | |
3719 | { }, | |
3720 | }; | |
3721 | ||
84edbeea AM |
3722 | static struct platform_driver ab8500_charger_driver = { |
3723 | .probe = ab8500_charger_probe, | |
28ea73f4 | 3724 | .remove = ab8500_charger_remove, |
84edbeea AM |
3725 | .suspend = ab8500_charger_suspend, |
3726 | .resume = ab8500_charger_resume, | |
3727 | .driver = { | |
3728 | .name = "ab8500-charger", | |
3729 | .owner = THIS_MODULE, | |
4aef72db | 3730 | .of_match_table = ab8500_charger_match, |
84edbeea AM |
3731 | }, |
3732 | }; | |
3733 | ||
3734 | static int __init ab8500_charger_init(void) | |
3735 | { | |
3736 | return platform_driver_register(&ab8500_charger_driver); | |
3737 | } | |
3738 | ||
3739 | static void __exit ab8500_charger_exit(void) | |
3740 | { | |
3741 | platform_driver_unregister(&ab8500_charger_driver); | |
3742 | } | |
3743 | ||
3744 | subsys_initcall_sync(ab8500_charger_init); | |
3745 | module_exit(ab8500_charger_exit); | |
3746 | ||
3747 | MODULE_LICENSE("GPL v2"); | |
3748 | MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy"); | |
3749 | MODULE_ALIAS("platform:ab8500-charger"); | |
3750 | MODULE_DESCRIPTION("AB8500 charger management driver"); |