Commit | Line | Data |
---|---|---|
fe0e3153 AV |
1 | /* |
2 | * Driver for batteries with DS2760 chips inside. | |
3 | * | |
4 | * Copyright © 2007 Anton Vorontsov | |
5 | * 2004-2007 Matt Reimer | |
6 | * 2004 Szabolcs Gyurko | |
7 | * | |
8 | * Use consistent with the GNU GPL is permitted, | |
9 | * provided that this copyright notice is | |
10 | * preserved in its entirety in all copies and derived works. | |
11 | * | |
12 | * Author: Anton Vorontsov <cbou@mail.ru> | |
13 | * February 2007 | |
14 | * | |
15 | * Matt Reimer <mreimer@vpop.net> | |
16 | * April 2004, 2005, 2007 | |
17 | * | |
18 | * Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> | |
19 | * September 2004 | |
20 | */ | |
21 | ||
22 | #include <linux/module.h> | |
23 | #include <linux/param.h> | |
24 | #include <linux/jiffies.h> | |
25 | #include <linux/workqueue.h> | |
26 | #include <linux/pm.h> | |
5a0e3ad6 | 27 | #include <linux/slab.h> |
fe0e3153 AV |
28 | #include <linux/platform_device.h> |
29 | #include <linux/power_supply.h> | |
30 | ||
31 | #include "../w1/w1.h" | |
32 | #include "../w1/slaves/w1_ds2760.h" | |
33 | ||
34 | struct ds2760_device_info { | |
35 | struct device *dev; | |
36 | ||
37 | /* DS2760 data, valid after calling ds2760_battery_read_status() */ | |
38 | unsigned long update_time; /* jiffies when data read */ | |
39 | char raw[DS2760_DATA_SIZE]; /* raw DS2760 data */ | |
40 | int voltage_raw; /* units of 4.88 mV */ | |
41 | int voltage_uV; /* units of µV */ | |
42 | int current_raw; /* units of 0.625 mA */ | |
43 | int current_uA; /* units of µA */ | |
44 | int accum_current_raw; /* units of 0.25 mAh */ | |
45 | int accum_current_uAh; /* units of µAh */ | |
46 | int temp_raw; /* units of 0.125 °C */ | |
47 | int temp_C; /* units of 0.1 °C */ | |
48 | int rated_capacity; /* units of µAh */ | |
49 | int rem_capacity; /* percentage */ | |
50 | int full_active_uAh; /* units of µAh */ | |
51 | int empty_uAh; /* units of µAh */ | |
52 | int life_sec; /* units of seconds */ | |
53 | int charge_status; /* POWER_SUPPLY_STATUS_* */ | |
54 | ||
55 | int full_counter; | |
297d716f KK |
56 | struct power_supply *bat; |
57 | struct power_supply_desc bat_desc; | |
fe0e3153 AV |
58 | struct device *w1_dev; |
59 | struct workqueue_struct *monitor_wqueue; | |
60 | struct delayed_work monitor_work; | |
8d631ccf | 61 | struct delayed_work set_charged_work; |
fe0e3153 AV |
62 | }; |
63 | ||
64 | static unsigned int cache_time = 1000; | |
65 | module_param(cache_time, uint, 0644); | |
66 | MODULE_PARM_DESC(cache_time, "cache time in milliseconds"); | |
67 | ||
90ab5ee9 | 68 | static bool pmod_enabled; |
cef437e3 DM |
69 | module_param(pmod_enabled, bool, 0644); |
70 | MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit"); | |
71 | ||
c1e72193 DM |
72 | static unsigned int rated_capacity; |
73 | module_param(rated_capacity, uint, 0644); | |
74 | MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index"); | |
75 | ||
02d0d275 DM |
76 | static unsigned int current_accum; |
77 | module_param(current_accum, uint, 0644); | |
78 | MODULE_PARM_DESC(current_accum, "current accumulator value"); | |
79 | ||
fe0e3153 AV |
80 | /* Some batteries have their rated capacity stored a N * 10 mAh, while |
81 | * others use an index into this table. */ | |
82 | static int rated_capacities[] = { | |
83 | 0, | |
84 | 920, /* Samsung */ | |
85 | 920, /* BYD */ | |
86 | 920, /* Lishen */ | |
87 | 920, /* NEC */ | |
88 | 1440, /* Samsung */ | |
89 | 1440, /* BYD */ | |
9c6f8740 PP |
90 | #ifdef CONFIG_MACH_H4700 |
91 | 1800, /* HP iPAQ hx4700 3.7V 1800mAh (359113-001) */ | |
92 | #else | |
fe0e3153 | 93 | 1440, /* Lishen */ |
9c6f8740 | 94 | #endif |
fe0e3153 AV |
95 | 1440, /* NEC */ |
96 | 2880, /* Samsung */ | |
97 | 2880, /* BYD */ | |
98 | 2880, /* Lishen */ | |
86e6c6bd PP |
99 | 2880, /* NEC */ |
100 | #ifdef CONFIG_MACH_H4700 | |
101 | 0, | |
102 | 3600, /* HP iPAQ hx4700 3.7V 3600mAh (359114-001) */ | |
103 | #endif | |
fe0e3153 AV |
104 | }; |
105 | ||
106 | /* array is level at temps 0°C, 10°C, 20°C, 30°C, 40°C | |
107 | * temp is in Celsius */ | |
108 | static int battery_interpolate(int array[], int temp) | |
109 | { | |
110 | int index, dt; | |
111 | ||
112 | if (temp <= 0) | |
113 | return array[0]; | |
114 | if (temp >= 40) | |
115 | return array[4]; | |
116 | ||
117 | index = temp / 10; | |
118 | dt = temp % 10; | |
119 | ||
120 | return array[index] + (((array[index + 1] - array[index]) * dt) / 10); | |
121 | } | |
122 | ||
123 | static int ds2760_battery_read_status(struct ds2760_device_info *di) | |
124 | { | |
125 | int ret, i, start, count, scale[5]; | |
126 | ||
127 | if (di->update_time && time_before(jiffies, di->update_time + | |
128 | msecs_to_jiffies(cache_time))) | |
129 | return 0; | |
130 | ||
131 | /* The first time we read the entire contents of SRAM/EEPROM, | |
132 | * but after that we just read the interesting bits that change. */ | |
133 | if (di->update_time == 0) { | |
134 | start = 0; | |
135 | count = DS2760_DATA_SIZE; | |
136 | } else { | |
137 | start = DS2760_VOLTAGE_MSB; | |
138 | count = DS2760_TEMP_LSB - start + 1; | |
139 | } | |
140 | ||
141 | ret = w1_ds2760_read(di->w1_dev, di->raw + start, start, count); | |
142 | if (ret != count) { | |
143 | dev_warn(di->dev, "call to w1_ds2760_read failed (0x%p)\n", | |
144 | di->w1_dev); | |
145 | return 1; | |
146 | } | |
147 | ||
148 | di->update_time = jiffies; | |
149 | ||
150 | /* DS2760 reports voltage in units of 4.88mV, but the battery class | |
151 | * reports in units of uV, so convert by multiplying by 4880. */ | |
152 | di->voltage_raw = (di->raw[DS2760_VOLTAGE_MSB] << 3) | | |
153 | (di->raw[DS2760_VOLTAGE_LSB] >> 5); | |
154 | di->voltage_uV = di->voltage_raw * 4880; | |
155 | ||
156 | /* DS2760 reports current in signed units of 0.625mA, but the battery | |
157 | * class reports in units of µA, so convert by multiplying by 625. */ | |
158 | di->current_raw = | |
159 | (((signed char)di->raw[DS2760_CURRENT_MSB]) << 5) | | |
160 | (di->raw[DS2760_CURRENT_LSB] >> 3); | |
161 | di->current_uA = di->current_raw * 625; | |
162 | ||
163 | /* DS2760 reports accumulated current in signed units of 0.25mAh. */ | |
164 | di->accum_current_raw = | |
165 | (((signed char)di->raw[DS2760_CURRENT_ACCUM_MSB]) << 8) | | |
166 | di->raw[DS2760_CURRENT_ACCUM_LSB]; | |
167 | di->accum_current_uAh = di->accum_current_raw * 250; | |
168 | ||
169 | /* DS2760 reports temperature in signed units of 0.125°C, but the | |
170 | * battery class reports in units of 1/10 °C, so we convert by | |
171 | * multiplying by .125 * 10 = 1.25. */ | |
172 | di->temp_raw = (((signed char)di->raw[DS2760_TEMP_MSB]) << 3) | | |
173 | (di->raw[DS2760_TEMP_LSB] >> 5); | |
174 | di->temp_C = di->temp_raw + (di->temp_raw / 4); | |
175 | ||
176 | /* At least some battery monitors (e.g. HP iPAQ) store the battery's | |
177 | * maximum rated capacity. */ | |
178 | if (di->raw[DS2760_RATED_CAPACITY] < ARRAY_SIZE(rated_capacities)) | |
179 | di->rated_capacity = rated_capacities[ | |
180 | (unsigned int)di->raw[DS2760_RATED_CAPACITY]]; | |
181 | else | |
182 | di->rated_capacity = di->raw[DS2760_RATED_CAPACITY] * 10; | |
183 | ||
184 | di->rated_capacity *= 1000; /* convert to µAh */ | |
185 | ||
186 | /* Calculate the full level at the present temperature. */ | |
187 | di->full_active_uAh = di->raw[DS2760_ACTIVE_FULL] << 8 | | |
188 | di->raw[DS2760_ACTIVE_FULL + 1]; | |
189 | ||
25f2bfa6 DM |
190 | /* If the full_active_uAh value is not given, fall back to the rated |
191 | * capacity. This is likely to happen when chips are not part of the | |
192 | * battery pack and is therefore not bootstrapped. */ | |
193 | if (di->full_active_uAh == 0) | |
194 | di->full_active_uAh = di->rated_capacity / 1000L; | |
195 | ||
196 | scale[0] = di->full_active_uAh; | |
fe0e3153 | 197 | for (i = 1; i < 5; i++) |
3af98a8f | 198 | scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 1 + i]; |
fe0e3153 AV |
199 | |
200 | di->full_active_uAh = battery_interpolate(scale, di->temp_C / 10); | |
201 | di->full_active_uAh *= 1000; /* convert to µAh */ | |
202 | ||
203 | /* Calculate the empty level at the present temperature. */ | |
204 | scale[4] = di->raw[DS2760_ACTIVE_EMPTY + 4]; | |
205 | for (i = 3; i >= 0; i--) | |
206 | scale[i] = scale[i + 1] + di->raw[DS2760_ACTIVE_EMPTY + i]; | |
207 | ||
208 | di->empty_uAh = battery_interpolate(scale, di->temp_C / 10); | |
209 | di->empty_uAh *= 1000; /* convert to µAh */ | |
210 | ||
a4e3f91b DM |
211 | if (di->full_active_uAh == di->empty_uAh) |
212 | di->rem_capacity = 0; | |
213 | else | |
214 | /* From Maxim Application Note 131: remaining capacity = | |
215 | * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */ | |
216 | di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) / | |
217 | (di->full_active_uAh - di->empty_uAh); | |
fe0e3153 AV |
218 | |
219 | if (di->rem_capacity < 0) | |
220 | di->rem_capacity = 0; | |
221 | if (di->rem_capacity > 100) | |
222 | di->rem_capacity = 100; | |
223 | ||
86af9503 | 224 | if (di->current_uA < -100L) |
b0525b48 DM |
225 | di->life_sec = -((di->accum_current_uAh - di->empty_uAh) * 36L) |
226 | / (di->current_uA / 100L); | |
fe0e3153 AV |
227 | else |
228 | di->life_sec = 0; | |
229 | ||
230 | return 0; | |
231 | } | |
232 | ||
02d0d275 DM |
233 | static void ds2760_battery_set_current_accum(struct ds2760_device_info *di, |
234 | unsigned int acr_val) | |
235 | { | |
236 | unsigned char acr[2]; | |
237 | ||
238 | /* acr is in units of 0.25 mAh */ | |
239 | acr_val *= 4L; | |
240 | acr_val /= 1000; | |
241 | ||
242 | acr[0] = acr_val >> 8; | |
243 | acr[1] = acr_val & 0xff; | |
244 | ||
245 | if (w1_ds2760_write(di->w1_dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2) | |
246 | dev_warn(di->dev, "ACR write failed\n"); | |
247 | } | |
248 | ||
fe0e3153 AV |
249 | static void ds2760_battery_update_status(struct ds2760_device_info *di) |
250 | { | |
251 | int old_charge_status = di->charge_status; | |
252 | ||
253 | ds2760_battery_read_status(di); | |
254 | ||
255 | if (di->charge_status == POWER_SUPPLY_STATUS_UNKNOWN) | |
256 | di->full_counter = 0; | |
257 | ||
297d716f | 258 | if (power_supply_am_i_supplied(di->bat)) { |
fe0e3153 AV |
259 | if (di->current_uA > 10000) { |
260 | di->charge_status = POWER_SUPPLY_STATUS_CHARGING; | |
261 | di->full_counter = 0; | |
262 | } else if (di->current_uA < -5000) { | |
263 | if (di->charge_status != POWER_SUPPLY_STATUS_NOT_CHARGING) | |
264 | dev_notice(di->dev, "not enough power to " | |
265 | "charge\n"); | |
266 | di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING; | |
267 | di->full_counter = 0; | |
268 | } else if (di->current_uA < 10000 && | |
269 | di->charge_status != POWER_SUPPLY_STATUS_FULL) { | |
270 | ||
271 | /* Don't consider the battery to be full unless | |
272 | * we've seen the current < 10 mA at least two | |
273 | * consecutive times. */ | |
274 | ||
275 | di->full_counter++; | |
276 | ||
277 | if (di->full_counter < 2) { | |
278 | di->charge_status = POWER_SUPPLY_STATUS_CHARGING; | |
279 | } else { | |
fe0e3153 | 280 | di->charge_status = POWER_SUPPLY_STATUS_FULL; |
02d0d275 DM |
281 | ds2760_battery_set_current_accum(di, |
282 | di->full_active_uAh); | |
fe0e3153 AV |
283 | } |
284 | } | |
285 | } else { | |
286 | di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING; | |
287 | di->full_counter = 0; | |
288 | } | |
289 | ||
290 | if (di->charge_status != old_charge_status) | |
297d716f | 291 | power_supply_changed(di->bat); |
fe0e3153 AV |
292 | } |
293 | ||
cef437e3 DM |
294 | static void ds2760_battery_write_status(struct ds2760_device_info *di, |
295 | char status) | |
296 | { | |
297 | if (status == di->raw[DS2760_STATUS_REG]) | |
298 | return; | |
299 | ||
300 | w1_ds2760_write(di->w1_dev, &status, DS2760_STATUS_WRITE_REG, 1); | |
301 | w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1); | |
302 | w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1); | |
303 | } | |
304 | ||
c1e72193 DM |
305 | static void ds2760_battery_write_rated_capacity(struct ds2760_device_info *di, |
306 | unsigned char rated_capacity) | |
307 | { | |
308 | if (rated_capacity == di->raw[DS2760_RATED_CAPACITY]) | |
309 | return; | |
310 | ||
311 | w1_ds2760_write(di->w1_dev, &rated_capacity, DS2760_RATED_CAPACITY, 1); | |
312 | w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1); | |
313 | w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1); | |
314 | } | |
315 | ||
bd52ca55 DM |
316 | static void ds2760_battery_write_active_full(struct ds2760_device_info *di, |
317 | int active_full) | |
318 | { | |
319 | unsigned char tmp[2] = { | |
320 | active_full >> 8, | |
321 | active_full & 0xff | |
322 | }; | |
323 | ||
324 | if (tmp[0] == di->raw[DS2760_ACTIVE_FULL] && | |
325 | tmp[1] == di->raw[DS2760_ACTIVE_FULL + 1]) | |
326 | return; | |
327 | ||
328 | w1_ds2760_write(di->w1_dev, tmp, DS2760_ACTIVE_FULL, sizeof(tmp)); | |
329 | w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK0); | |
330 | w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK0); | |
331 | ||
332 | /* Write to the di->raw[] buffer directly - the DS2760_ACTIVE_FULL | |
333 | * values won't be read back by ds2760_battery_read_status() */ | |
334 | di->raw[DS2760_ACTIVE_FULL] = tmp[0]; | |
335 | di->raw[DS2760_ACTIVE_FULL + 1] = tmp[1]; | |
336 | } | |
337 | ||
fe0e3153 AV |
338 | static void ds2760_battery_work(struct work_struct *work) |
339 | { | |
340 | struct ds2760_device_info *di = container_of(work, | |
341 | struct ds2760_device_info, monitor_work.work); | |
342 | const int interval = HZ * 60; | |
343 | ||
0cddc0a9 | 344 | dev_dbg(di->dev, "%s\n", __func__); |
fe0e3153 AV |
345 | |
346 | ds2760_battery_update_status(di); | |
347 | queue_delayed_work(di->monitor_wqueue, &di->monitor_work, interval); | |
fe0e3153 AV |
348 | } |
349 | ||
fe0e3153 AV |
350 | static void ds2760_battery_external_power_changed(struct power_supply *psy) |
351 | { | |
297d716f | 352 | struct ds2760_device_info *di = power_supply_get_drvdata(psy); |
fe0e3153 | 353 | |
0cddc0a9 | 354 | dev_dbg(di->dev, "%s\n", __func__); |
fe0e3153 | 355 | |
41f63c53 | 356 | mod_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ/10); |
fe0e3153 AV |
357 | } |
358 | ||
8d631ccf DM |
359 | |
360 | static void ds2760_battery_set_charged_work(struct work_struct *work) | |
361 | { | |
362 | char bias; | |
363 | struct ds2760_device_info *di = container_of(work, | |
364 | struct ds2760_device_info, set_charged_work.work); | |
365 | ||
366 | dev_dbg(di->dev, "%s\n", __func__); | |
367 | ||
368 | ds2760_battery_read_status(di); | |
369 | ||
370 | /* When we get notified by external circuitry that the battery is | |
371 | * considered fully charged now, we know that there is no current | |
372 | * flow any more. However, the ds2760's internal current meter is | |
373 | * too inaccurate to rely on - spec say something ~15% failure. | |
374 | * Hence, we use the current offset bias register to compensate | |
375 | * that error. | |
376 | */ | |
377 | ||
297d716f | 378 | if (!power_supply_am_i_supplied(di->bat)) |
8d631ccf DM |
379 | return; |
380 | ||
381 | bias = (signed char) di->current_raw + | |
382 | (signed char) di->raw[DS2760_CURRENT_OFFSET_BIAS]; | |
383 | ||
384 | dev_dbg(di->dev, "%s: bias = %d\n", __func__, bias); | |
385 | ||
386 | w1_ds2760_write(di->w1_dev, &bias, DS2760_CURRENT_OFFSET_BIAS, 1); | |
387 | w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1); | |
388 | w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1); | |
389 | ||
390 | /* Write to the di->raw[] buffer directly - the CURRENT_OFFSET_BIAS | |
391 | * value won't be read back by ds2760_battery_read_status() */ | |
392 | di->raw[DS2760_CURRENT_OFFSET_BIAS] = bias; | |
393 | } | |
394 | ||
395 | static void ds2760_battery_set_charged(struct power_supply *psy) | |
396 | { | |
297d716f | 397 | struct ds2760_device_info *di = power_supply_get_drvdata(psy); |
8d631ccf DM |
398 | |
399 | /* postpone the actual work by 20 secs. This is for debouncing GPIO | |
400 | * signals and to let the current value settle. See AN4188. */ | |
41f63c53 | 401 | mod_delayed_work(di->monitor_wqueue, &di->set_charged_work, HZ * 20); |
8d631ccf DM |
402 | } |
403 | ||
fe0e3153 AV |
404 | static int ds2760_battery_get_property(struct power_supply *psy, |
405 | enum power_supply_property psp, | |
406 | union power_supply_propval *val) | |
407 | { | |
297d716f | 408 | struct ds2760_device_info *di = power_supply_get_drvdata(psy); |
fe0e3153 AV |
409 | |
410 | switch (psp) { | |
411 | case POWER_SUPPLY_PROP_STATUS: | |
412 | val->intval = di->charge_status; | |
413 | return 0; | |
414 | default: | |
415 | break; | |
416 | } | |
417 | ||
418 | ds2760_battery_read_status(di); | |
419 | ||
420 | switch (psp) { | |
421 | case POWER_SUPPLY_PROP_VOLTAGE_NOW: | |
422 | val->intval = di->voltage_uV; | |
423 | break; | |
424 | case POWER_SUPPLY_PROP_CURRENT_NOW: | |
425 | val->intval = di->current_uA; | |
426 | break; | |
427 | case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: | |
428 | val->intval = di->rated_capacity; | |
429 | break; | |
430 | case POWER_SUPPLY_PROP_CHARGE_FULL: | |
431 | val->intval = di->full_active_uAh; | |
432 | break; | |
433 | case POWER_SUPPLY_PROP_CHARGE_EMPTY: | |
434 | val->intval = di->empty_uAh; | |
435 | break; | |
436 | case POWER_SUPPLY_PROP_CHARGE_NOW: | |
437 | val->intval = di->accum_current_uAh; | |
438 | break; | |
439 | case POWER_SUPPLY_PROP_TEMP: | |
440 | val->intval = di->temp_C; | |
441 | break; | |
5c6e9bf2 DM |
442 | case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: |
443 | val->intval = di->life_sec; | |
444 | break; | |
445 | case POWER_SUPPLY_PROP_CAPACITY: | |
446 | val->intval = di->rem_capacity; | |
447 | break; | |
fe0e3153 AV |
448 | default: |
449 | return -EINVAL; | |
450 | } | |
451 | ||
452 | return 0; | |
453 | } | |
454 | ||
bd52ca55 DM |
455 | static int ds2760_battery_set_property(struct power_supply *psy, |
456 | enum power_supply_property psp, | |
457 | const union power_supply_propval *val) | |
458 | { | |
297d716f | 459 | struct ds2760_device_info *di = power_supply_get_drvdata(psy); |
bd52ca55 DM |
460 | |
461 | switch (psp) { | |
462 | case POWER_SUPPLY_PROP_CHARGE_FULL: | |
463 | /* the interface counts in uAh, convert the value */ | |
464 | ds2760_battery_write_active_full(di, val->intval / 1000L); | |
465 | break; | |
466 | ||
467 | case POWER_SUPPLY_PROP_CHARGE_NOW: | |
468 | /* ds2760_battery_set_current_accum() does the conversion */ | |
469 | ds2760_battery_set_current_accum(di, val->intval); | |
470 | break; | |
471 | ||
472 | default: | |
473 | return -EPERM; | |
474 | } | |
475 | ||
476 | return 0; | |
477 | } | |
478 | ||
479 | static int ds2760_battery_property_is_writeable(struct power_supply *psy, | |
480 | enum power_supply_property psp) | |
481 | { | |
482 | switch (psp) { | |
483 | case POWER_SUPPLY_PROP_CHARGE_FULL: | |
484 | case POWER_SUPPLY_PROP_CHARGE_NOW: | |
485 | return 1; | |
486 | ||
487 | default: | |
488 | break; | |
489 | } | |
490 | ||
491 | return 0; | |
492 | } | |
493 | ||
fe0e3153 AV |
494 | static enum power_supply_property ds2760_battery_props[] = { |
495 | POWER_SUPPLY_PROP_STATUS, | |
496 | POWER_SUPPLY_PROP_VOLTAGE_NOW, | |
497 | POWER_SUPPLY_PROP_CURRENT_NOW, | |
498 | POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, | |
499 | POWER_SUPPLY_PROP_CHARGE_FULL, | |
500 | POWER_SUPPLY_PROP_CHARGE_EMPTY, | |
501 | POWER_SUPPLY_PROP_CHARGE_NOW, | |
502 | POWER_SUPPLY_PROP_TEMP, | |
5c6e9bf2 DM |
503 | POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, |
504 | POWER_SUPPLY_PROP_CAPACITY, | |
fe0e3153 AV |
505 | }; |
506 | ||
507 | static int ds2760_battery_probe(struct platform_device *pdev) | |
508 | { | |
297d716f | 509 | struct power_supply_config psy_cfg = {}; |
cef437e3 | 510 | char status; |
fe0e3153 AV |
511 | int retval = 0; |
512 | struct ds2760_device_info *di; | |
fe0e3153 | 513 | |
4ec730dc | 514 | di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); |
fe0e3153 AV |
515 | if (!di) { |
516 | retval = -ENOMEM; | |
517 | goto di_alloc_failed; | |
518 | } | |
519 | ||
520 | platform_set_drvdata(pdev, di); | |
521 | ||
297d716f KK |
522 | di->dev = &pdev->dev; |
523 | di->w1_dev = pdev->dev.parent; | |
524 | di->bat_desc.name = dev_name(&pdev->dev); | |
525 | di->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY; | |
526 | di->bat_desc.properties = ds2760_battery_props; | |
527 | di->bat_desc.num_properties = ARRAY_SIZE(ds2760_battery_props); | |
528 | di->bat_desc.get_property = ds2760_battery_get_property; | |
529 | di->bat_desc.set_property = ds2760_battery_set_property; | |
530 | di->bat_desc.property_is_writeable = | |
bd52ca55 | 531 | ds2760_battery_property_is_writeable; |
297d716f KK |
532 | di->bat_desc.set_charged = ds2760_battery_set_charged; |
533 | di->bat_desc.external_power_changed = | |
fe0e3153 AV |
534 | ds2760_battery_external_power_changed; |
535 | ||
297d716f KK |
536 | psy_cfg.drv_data = di; |
537 | ||
fe0e3153 AV |
538 | di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN; |
539 | ||
cef437e3 DM |
540 | /* enable sleep mode feature */ |
541 | ds2760_battery_read_status(di); | |
542 | status = di->raw[DS2760_STATUS_REG]; | |
543 | if (pmod_enabled) | |
544 | status |= DS2760_STATUS_PMOD; | |
545 | else | |
546 | status &= ~DS2760_STATUS_PMOD; | |
547 | ||
548 | ds2760_battery_write_status(di, status); | |
549 | ||
c1e72193 DM |
550 | /* set rated capacity from module param */ |
551 | if (rated_capacity) | |
552 | ds2760_battery_write_rated_capacity(di, rated_capacity); | |
553 | ||
02d0d275 DM |
554 | /* set current accumulator if given as parameter. |
555 | * this should only be done for bootstrapping the value */ | |
556 | if (current_accum) | |
557 | ds2760_battery_set_current_accum(di, current_accum); | |
558 | ||
297d716f KK |
559 | di->bat = power_supply_register(&pdev->dev, &di->bat_desc, &psy_cfg); |
560 | if (IS_ERR(di->bat)) { | |
2e83a5c5 | 561 | dev_err(di->dev, "failed to register battery\n"); |
297d716f | 562 | retval = PTR_ERR(di->bat); |
2e83a5c5 DM |
563 | goto batt_failed; |
564 | } | |
565 | ||
fe0e3153 | 566 | INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work); |
8d631ccf DM |
567 | INIT_DELAYED_WORK(&di->set_charged_work, |
568 | ds2760_battery_set_charged_work); | |
ba88b002 | 569 | di->monitor_wqueue = create_singlethread_workqueue(dev_name(&pdev->dev)); |
fe0e3153 AV |
570 | if (!di->monitor_wqueue) { |
571 | retval = -ESRCH; | |
572 | goto workqueue_failed; | |
573 | } | |
574 | queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ * 1); | |
575 | ||
576 | goto success; | |
577 | ||
578 | workqueue_failed: | |
297d716f | 579 | power_supply_unregister(di->bat); |
fe0e3153 | 580 | batt_failed: |
fe0e3153 AV |
581 | di_alloc_failed: |
582 | success: | |
583 | return retval; | |
584 | } | |
585 | ||
586 | static int ds2760_battery_remove(struct platform_device *pdev) | |
587 | { | |
588 | struct ds2760_device_info *di = platform_get_drvdata(pdev); | |
589 | ||
afe2c511 TH |
590 | cancel_delayed_work_sync(&di->monitor_work); |
591 | cancel_delayed_work_sync(&di->set_charged_work); | |
fe0e3153 | 592 | destroy_workqueue(di->monitor_wqueue); |
297d716f | 593 | power_supply_unregister(di->bat); |
fe0e3153 AV |
594 | |
595 | return 0; | |
596 | } | |
597 | ||
598 | #ifdef CONFIG_PM | |
599 | ||
600 | static int ds2760_battery_suspend(struct platform_device *pdev, | |
601 | pm_message_t state) | |
602 | { | |
603 | struct ds2760_device_info *di = platform_get_drvdata(pdev); | |
604 | ||
605 | di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN; | |
606 | ||
607 | return 0; | |
608 | } | |
609 | ||
610 | static int ds2760_battery_resume(struct platform_device *pdev) | |
611 | { | |
612 | struct ds2760_device_info *di = platform_get_drvdata(pdev); | |
613 | ||
614 | di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN; | |
297d716f | 615 | power_supply_changed(di->bat); |
fe0e3153 | 616 | |
41f63c53 | 617 | mod_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ); |
fe0e3153 AV |
618 | |
619 | return 0; | |
620 | } | |
621 | ||
622 | #else | |
623 | ||
624 | #define ds2760_battery_suspend NULL | |
625 | #define ds2760_battery_resume NULL | |
626 | ||
627 | #endif /* CONFIG_PM */ | |
628 | ||
2f5a5cf9 KS |
629 | MODULE_ALIAS("platform:ds2760-battery"); |
630 | ||
fe0e3153 AV |
631 | static struct platform_driver ds2760_battery_driver = { |
632 | .driver = { | |
633 | .name = "ds2760-battery", | |
634 | }, | |
635 | .probe = ds2760_battery_probe, | |
636 | .remove = ds2760_battery_remove, | |
637 | .suspend = ds2760_battery_suspend, | |
638 | .resume = ds2760_battery_resume, | |
639 | }; | |
640 | ||
300bac7f | 641 | module_platform_driver(ds2760_battery_driver); |
fe0e3153 AV |
642 | |
643 | MODULE_LICENSE("GPL"); | |
644 | MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>, " | |
645 | "Matt Reimer <mreimer@vpop.net>, " | |
646 | "Anton Vorontsov <cbou@mail.ru>"); | |
647 | MODULE_DESCRIPTION("ds2760 battery driver"); |