Commit | Line | Data |
---|---|---|
bbda14df | 1 | menuconfig REGULATOR |
ba7e4763 | 2 | bool "Voltage and Current Regulator Support" |
ba7e4763 LG |
3 | help |
4 | Generic Voltage and Current Regulator support. | |
5 | ||
6 | This framework is designed to provide a generic interface to voltage | |
7 | and current regulators within the Linux kernel. It's intended to | |
8 | provide voltage and current control to client or consumer drivers and | |
9 | also provide status information to user space applications through a | |
10 | sysfs interface. | |
11 | ||
12 | The intention is to allow systems to dynamically control regulator | |
13 | output in order to save power and prolong battery life. This applies | |
14 | to both voltage regulators (where voltage output is controllable) and | |
15 | current sinks (where current output is controllable). | |
16 | ||
17 | This framework safely compiles out if not selected so that client | |
18 | drivers can still be used in systems with no software controllable | |
19 | regulators. | |
20 | ||
21 | If unsure, say no. | |
22 | ||
809d310c | 23 | |
bbda14df TI |
24 | if REGULATOR |
25 | ||
ba7e4763 LG |
26 | config REGULATOR_DEBUG |
27 | bool "Regulator debug support" | |
ba7e4763 LG |
28 | help |
29 | Say yes here to enable debugging support. | |
30 | ||
34abbd68 MB |
31 | config REGULATOR_DUMMY |
32 | bool "Provide a dummy regulator if regulator lookups fail" | |
33 | help | |
34 | If this option is enabled then when a regulator lookup fails | |
35 | and the board has not specified that it has provided full | |
4f842f6b MB |
36 | constraints the regulator core will provide an always |
37 | enabled dummy regulator, allowing consumer drivers to continue. | |
34abbd68 MB |
38 | |
39 | A warning will be generated when this substitution is done. | |
40 | ||
ba7e4763 | 41 | config REGULATOR_FIXED_VOLTAGE |
a9cb63b2 | 42 | tristate "Fixed voltage regulator support" |
a9cb63b2 MB |
43 | help |
44 | This driver provides support for fixed voltage regulators, | |
45 | useful for systems which use a combination of software | |
46 | managed regulators and simple non-configurable regulators. | |
ba7e4763 LG |
47 | |
48 | config REGULATOR_VIRTUAL_CONSUMER | |
49 | tristate "Virtual regulator consumer support" | |
ba7e4763 LG |
50 | help |
51 | This driver provides a virtual consumer for the voltage and | |
c6d678b6 MJ |
52 | current regulator API which provides sysfs controls for |
53 | configuring the supplies requested. This is mainly useful | |
54 | for test purposes. | |
ba7e4763 | 55 | |
c6d678b6 | 56 | If unsure, say no. |
ba7e4763 | 57 | |
1d98cccf MR |
58 | config REGULATOR_USERSPACE_CONSUMER |
59 | tristate "Userspace regulator consumer support" | |
1d98cccf MR |
60 | help |
61 | There are some classes of devices that are controlled entirely | |
6f2653e6 | 62 | from user space. Userspace consumer driver provides ability to |
1d98cccf MR |
63 | control power supplies for such devices. |
64 | ||
c6d678b6 | 65 | If unsure, say no. |
1d98cccf | 66 | |
95f1dc08 CX |
67 | config REGULATOR_88PM800 |
68 | tristate "Marvell 88PM800 Power regulators" | |
7c45f60b | 69 | depends on MFD_88PM800 |
95f1dc08 CX |
70 | help |
71 | This driver supports Marvell 88PM800 voltage regulator chips. | |
72 | It delivers digitally programmable output, | |
73 | the voltage is programmed via I2C interface. | |
74 | It's suitable to support PXA988 chips to control VCC_MAIN and | |
75 | various voltages. | |
76 | ||
82b736df | 77 | config REGULATOR_88PM8607 |
631a1fc4 | 78 | tristate "Marvell 88PM8607 Power regulators" |
82b736df | 79 | depends on MFD_88PM860X=y |
3f0292ae | 80 | help |
82b736df | 81 | This driver supports 88PM8607 voltage regulator chips. |
3f0292ae | 82 | |
dfb9b8a4 AL |
83 | config REGULATOR_AD5398 |
84 | tristate "Analog Devices AD5398/AD5821 regulators" | |
85 | depends on I2C | |
0eb5d5ab | 86 | help |
dfb9b8a4 AL |
87 | This driver supports AD5398 and AD5821 current regulator chips. |
88 | If building into module, its name is ad5398.ko. | |
89 | ||
82b736df MB |
90 | config REGULATOR_ANATOP |
91 | tristate "Freescale i.MX on-chip ANATOP LDO regulators" | |
92 | depends on MFD_SYSCON | |
93 | help | |
94 | Say y here to support Freescale i.MX on-chip ANATOP LDOs | |
95 | regulators. It is recommended that this option be | |
96 | enabled on i.MX6 platform. | |
97 | ||
dfb9b8a4 AL |
98 | config REGULATOR_AAT2870 |
99 | tristate "AnalogicTech AAT2870 Regulators" | |
100 | depends on MFD_AAT2870_CORE | |
101 | help | |
102 | If you have a AnalogicTech AAT2870 say Y to enable the | |
103 | regulator driver. | |
104 | ||
82b736df MB |
105 | config REGULATOR_AB3100 |
106 | tristate "ST-Ericsson AB3100 Regulator functions" | |
107 | depends on AB3100_CORE | |
108 | default y if AB3100_CORE | |
109 | help | |
110 | These regulators correspond to functionality in the | |
111 | AB3100 analog baseband dealing with power regulators | |
112 | for the system. | |
113 | ||
114 | config REGULATOR_AB8500 | |
115 | bool "ST-Ericsson AB8500 Power Regulators" | |
116 | depends on AB8500_CORE | |
117 | help | |
118 | This driver supports the regulators found on the ST-Ericsson mixed | |
119 | signal AB8500 PMIC | |
120 | ||
b667a45d MB |
121 | config REGULATOR_ARIZONA |
122 | tristate "Wolfson Arizona class devices" | |
123 | depends on MFD_ARIZONA | |
e6ed9058 | 124 | depends on SND_SOC |
b667a45d MB |
125 | help |
126 | Support for the regulators found on Wolfson Arizona class | |
127 | devices. | |
128 | ||
82b736df MB |
129 | config REGULATOR_AS3711 |
130 | tristate "AS3711 PMIC" | |
131 | depends on MFD_AS3711 | |
132 | help | |
133 | This driver provides support for the voltage regulators on the | |
134 | AS3711 PMIC | |
135 | ||
dfb9b8a4 AL |
136 | config REGULATOR_DA903X |
137 | tristate "Dialog Semiconductor DA9030/DA9034 regulators" | |
138 | depends on PMIC_DA903X | |
139 | help | |
140 | Say y here to support the BUCKs and LDOs regulators found on | |
141 | Dialog Semiconductor DA9030/DA9034 PMIC. | |
142 | ||
143 | config REGULATOR_DA9052 | |
144 | tristate "Dialog Semiconductor DA9052/DA9053 regulators" | |
145 | depends on PMIC_DA9052 | |
146 | help | |
147 | This driver supports the voltage regulators of DA9052-BC and | |
148 | DA9053-AA/Bx PMIC. | |
149 | ||
f6130be6 AJ |
150 | config REGULATOR_DA9055 |
151 | tristate "Dialog Semiconductor DA9055 regulators" | |
152 | depends on MFD_DA9055 | |
153 | help | |
154 | Say y here to support the BUCKs and LDOs regulators found on | |
155 | Dialog Semiconductor DA9055 PMIC. | |
156 | ||
157 | This driver can also be built as a module. If so, the module | |
158 | will be called da9055-regulator. | |
159 | ||
69ca3e58 KG |
160 | config REGULATOR_DA9063 |
161 | tristate "Dialog Semiconductor DA9063 regulators" | |
162 | depends on MFD_DA9063 | |
163 | help | |
164 | Say y here to support the BUCKs and LDOs regulators found on | |
165 | DA9063 PMICs. | |
166 | ||
167 | This driver can also be built as a module. If so, the module | |
168 | will be called da9063-regulator. | |
169 | ||
16f10918 ST |
170 | config REGULATOR_DA9210 |
171 | tristate "Dialog Semiconductor DA9210 regulator" | |
172 | depends on I2C | |
173 | select REGMAP_I2C | |
174 | help | |
175 | Say y here to support for the Dialog Semiconductor DA9210. | |
176 | The DA9210 is a multi-phase synchronous step down | |
177 | converter 12A DC-DC Buck controlled through an I2C | |
178 | interface. | |
179 | ||
82b736df MB |
180 | config REGULATOR_DBX500_PRCMU |
181 | bool | |
182 | ||
183 | config REGULATOR_DB8500_PRCMU | |
184 | bool "ST-Ericsson DB8500 Voltage Domain Regulators" | |
185 | depends on MFD_DB8500_PRCMU | |
186 | select REGULATOR_DBX500_PRCMU | |
187 | help | |
188 | This driver supports the voltage domain regulators controlled by the | |
189 | DB8500 PRCMU | |
190 | ||
49d8c599 YZ |
191 | config REGULATOR_FAN53555 |
192 | tristate "Fairchild FAN53555 Regulator" | |
193 | depends on I2C | |
194 | select REGMAP_I2C | |
195 | help | |
196 | This driver supports Fairchild FAN53555 Digitally Programmable | |
197 | TinyBuck Regulator. The FAN53555 is a step-down switching voltage | |
198 | regulator that delivers a digitally programmable output from an | |
199 | input voltage supply of 2.5V to 5.5V. The output voltage is | |
200 | programmed through an I2C interface. | |
201 | ||
82b736df MB |
202 | config REGULATOR_GPIO |
203 | tristate "GPIO regulator support" | |
204 | depends on GPIOLIB | |
e3e5aff7 | 205 | help |
82b736df MB |
206 | This driver provides support for regulators that can be |
207 | controlled via gpios. | |
208 | It is capable of supporting current and voltage regulators | |
209 | and the platform has to provide a mapping of GPIO-states | |
210 | to target volts/amps. | |
e3e5aff7 | 211 | |
82b736df MB |
212 | config REGULATOR_ISL6271A |
213 | tristate "Intersil ISL6271A Power regulator" | |
214 | depends on I2C | |
215 | help | |
216 | This driver supports ISL6271A voltage regulator chip. | |
dfb9b8a4 | 217 | |
82b736df MB |
218 | config REGULATOR_LP3971 |
219 | tristate "National Semiconductors LP3971 PMIC regulator driver" | |
220 | depends on I2C | |
dfb9b8a4 | 221 | help |
82b736df MB |
222 | Say Y here to support the voltage regulators and convertors |
223 | on National Semiconductors LP3971 PMIC | |
dfb9b8a4 | 224 | |
82b736df MB |
225 | config REGULATOR_LP3972 |
226 | tristate "National Semiconductors LP3972 PMIC regulator driver" | |
227 | depends on I2C | |
dfb9b8a4 | 228 | help |
82b736df MB |
229 | Say Y here to support the voltage regulators and convertors |
230 | on National Semiconductors LP3972 PMIC | |
dfb9b8a4 | 231 | |
82b736df | 232 | config REGULATOR_LP872X |
631a1fc4 | 233 | tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" |
613965fb | 234 | depends on I2C |
82b736df MB |
235 | select REGMAP_I2C |
236 | help | |
237 | This driver supports LP8720/LP8725 PMIC | |
238 | ||
239 | config REGULATOR_LP8755 | |
240 | tristate "TI LP8755 High Performance PMU driver" | |
dfb9b8a4 | 241 | depends on I2C |
82b736df | 242 | select REGMAP_I2C |
dfb9b8a4 | 243 | help |
82b736df MB |
244 | This driver supports LP8755 High Performance PMU driver. This |
245 | chip contains six step-down DC/DC converters which can support | |
246 | 9 mode multiphase configuration. | |
dfb9b8a4 | 247 | |
82b736df | 248 | config REGULATOR_LP8788 |
631a1fc4 | 249 | tristate "TI LP8788 Power Regulators" |
82b736df | 250 | depends on MFD_LP8788 |
dfb9b8a4 | 251 | help |
82b736df | 252 | This driver supports LP8788 voltage regulator chip. |
0eb5d5ab | 253 | |
55f4fa4e RJ |
254 | config REGULATOR_MAX1586 |
255 | tristate "Maxim 1586/1587 voltage regulator" | |
256 | depends on I2C | |
55f4fa4e RJ |
257 | help |
258 | This driver controls a Maxim 1586 or 1587 voltage output | |
259 | regulator via I2C bus. The provided regulator is suitable | |
260 | for PXA27x chips to control VCC_CORE and VCC_USIM voltages. | |
261 | ||
a71b797f HZ |
262 | config REGULATOR_MAX8649 |
263 | tristate "Maxim 8649 voltage regulator" | |
264 | depends on I2C | |
c5b68d47 | 265 | select REGMAP_I2C |
a71b797f HZ |
266 | help |
267 | This driver controls a Maxim 8649 voltage output regulator via | |
268 | I2C bus. | |
269 | ||
27f37e4b WS |
270 | config REGULATOR_MAX8660 |
271 | tristate "Maxim 8660/8661 voltage regulator" | |
272 | depends on I2C | |
273 | help | |
274 | This driver controls a Maxim 8660/8661 voltage output | |
275 | regulator via I2C bus. | |
276 | ||
ffee1909 GY |
277 | config REGULATOR_MAX8907 |
278 | tristate "Maxim 8907 voltage regulator" | |
279 | depends on MFD_MAX8907 | |
280 | help | |
281 | This driver controls a Maxim 8907 voltage output regulator | |
282 | via I2C bus. The provided regulator is suitable for Tegra | |
283 | chip to control Step-Down DC-DC and LDOs. | |
284 | ||
08ff6f2a HZ |
285 | config REGULATOR_MAX8925 |
286 | tristate "Maxim MAX8925 Power Management IC" | |
287 | depends on MFD_MAX8925 | |
288 | help | |
289 | Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. | |
290 | ||
202f4f53 MH |
291 | config REGULATOR_MAX8952 |
292 | tristate "Maxim MAX8952 Power Management IC" | |
293 | depends on I2C | |
294 | help | |
295 | This driver controls a Maxim 8952 voltage output regulator | |
296 | via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS | |
297 | modes ranging from 0.77V to 1.40V by 0.01V steps. | |
298 | ||
5928f538 LD |
299 | config REGULATOR_MAX8973 |
300 | tristate "Maxim MAX8973 voltage regulator " | |
301 | depends on I2C | |
302 | select REGMAP_I2C | |
303 | help | |
304 | The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down | |
305 | switching regulator delievers up to 9A of output current. Each | |
306 | phase operates at a 2MHz fixed frequency with a 120 deg shift | |
307 | from the adjacent phase, allowing the use of small magnetic component. | |
308 | ||
bd6ca2cf MH |
309 | config REGULATOR_MAX8997 |
310 | tristate "Maxim 8997/8966 regulator" | |
311 | depends on MFD_MAX8997 | |
312 | help | |
313 | This driver controls a Maxim 8997/8966 regulator | |
314 | via I2C bus. The provided regulator is suitable for S5PC110, | |
315 | S5PV210, and Exynos-4 chips to control VCC_CORE and | |
316 | VCC_USIM voltages. | |
317 | ||
156f2528 KP |
318 | config REGULATOR_MAX8998 |
319 | tristate "Maxim 8998 voltage regulator" | |
69f71008 | 320 | depends on MFD_MAX8998 |
156f2528 KP |
321 | help |
322 | This driver controls a Maxim 8998 voltage output regulator | |
323 | via I2C bus. The provided regulator is suitable for S3C6410 | |
324 | and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. | |
325 | ||
133d4016 JL |
326 | config REGULATOR_MAX77686 |
327 | tristate "Maxim 77686 regulator" | |
328 | depends on MFD_MAX77686 | |
329 | help | |
330 | This driver controls a Maxim 77686 regulator | |
331 | via I2C bus. The provided regulator is suitable for | |
332 | Exynos-4 chips to control VARM and VINT voltages. | |
333 | ||
80b022e2 JL |
334 | config REGULATOR_MAX77693 |
335 | tristate "Maxim MAX77693 regulator" | |
336 | depends on MFD_MAX77693 | |
337 | help | |
338 | This driver controls a Maxim 77693 regulator via I2C bus. | |
339 | The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' | |
340 | and one current regulator 'CHARGER'. This is suitable for | |
341 | Exynos-4x12 chips. | |
342 | ||
82b736df MB |
343 | config REGULATOR_MC13XXX_CORE |
344 | tristate | |
5ec271e7 | 345 | |
82b736df MB |
346 | config REGULATOR_MC13783 |
347 | tristate "Freescale MC13783 regulator driver" | |
348 | depends on MFD_MC13783 | |
349 | select REGULATOR_MC13XXX_CORE | |
0cbdf7bc | 350 | help |
82b736df MB |
351 | Say y here to support the regulators found on the Freescale MC13783 |
352 | PMIC. | |
0cbdf7bc | 353 | |
82b736df MB |
354 | config REGULATOR_MC13892 |
355 | tristate "Freescale MC13892 regulator driver" | |
356 | depends on MFD_MC13XXX | |
357 | select REGULATOR_MC13XXX_CORE | |
5976f095 | 358 | help |
82b736df MB |
359 | Say y here to support the regulators found on the Freescale MC13892 |
360 | PMIC. | |
5976f095 | 361 | |
82b736df MB |
362 | config REGULATOR_PALMAS |
363 | tristate "TI Palmas PMIC Regulators" | |
364 | depends on MFD_PALMAS | |
af8b5fc3 | 365 | help |
82b736df MB |
366 | If you wish to control the regulators on the Palmas series of |
367 | chips say Y here. This will enable support for all the software | |
368 | controllable SMPS/LDO regulators. | |
af8b5fc3 | 369 | |
82b736df MB |
370 | The regulators available on Palmas series chips vary depending |
371 | on the muxing. This is handled automatically in the driver by | |
372 | reading the mux info from OTP. | |
b59320cc | 373 | |
82b736df MB |
374 | config REGULATOR_PCAP |
375 | tristate "Motorola PCAP2 regulator driver" | |
376 | depends on EZX_PCAP | |
ade7515f | 377 | help |
82b736df MB |
378 | This driver provides support for the voltage regulators of the |
379 | PCAP2 PMIC. | |
ade7515f | 380 | |
dfb9b8a4 AL |
381 | config REGULATOR_PCF50633 |
382 | tristate "NXP PCF50633 regulator driver" | |
c6d678b6 | 383 | depends on MFD_PCF50633 |
295c08bc | 384 | help |
dfb9b8a4 AL |
385 | Say Y here to support the voltage regulators and convertors |
386 | on PCF50633 | |
295c08bc | 387 | |
3784b6d6 RG |
388 | config REGULATOR_PFUZE100 |
389 | tristate "Support regulators on Freescale PFUZE100 PMIC" | |
390 | depends on I2C | |
94421b05 | 391 | select REGMAP_I2C |
3784b6d6 RG |
392 | help |
393 | Say y here to support the regulators found on the Freescale PFUZE100 | |
394 | PMIC. | |
395 | ||
6ffc3270 LD |
396 | config REGULATOR_RC5T583 |
397 | tristate "RICOH RC5T583 Power regulators" | |
398 | depends on MFD_RC5T583 | |
399 | help | |
400 | Select this option to enable the power regulator of RICOH | |
401 | PMIC RC5T583. | |
402 | This driver supports the control of different power rails of device | |
403 | through regulator interface. The device supports multiple DCDC/LDO | |
404 | outputs which can be controlled by i2c communication. | |
405 | ||
cb74685e SK |
406 | config REGULATOR_S2MPS11 |
407 | tristate "Samsung S2MPS11 voltage regulator" | |
408 | depends on MFD_SEC_CORE | |
409 | help | |
410 | This driver supports a Samsung S2MPS11 voltage output regulator | |
411 | via I2C bus. S2MPS11 is comprised of high efficient Buck converters | |
412 | including Dual-Phase Buck converter, Buck-Boost converter, various LDOs. | |
413 | ||
dfb9b8a4 AL |
414 | config REGULATOR_S5M8767 |
415 | tristate "Samsung S5M8767A voltage regulator" | |
66c9fbb9 | 416 | depends on MFD_SEC_CORE |
5e428d5c | 417 | help |
dfb9b8a4 AL |
418 | This driver supports a Samsung S5M8767A voltage output regulator |
419 | via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and | |
420 | supports DVS mode with 8bits of output voltage control. | |
5e428d5c | 421 | |
82b736df | 422 | config REGULATOR_TI_ABB |
631a1fc4 | 423 | tristate "TI Adaptive Body Bias on-chip LDO" |
82b736df | 424 | depends on ARCH_OMAP |
4c5dabce | 425 | help |
82b736df MB |
426 | Select this option to support Texas Instruments' on-chip Adaptive Body |
427 | Bias (ABB) LDO regulators. It is recommended that this option be | |
428 | enabled on required TI SoC. Certain Operating Performance Points | |
429 | on TI SoCs may be unstable without enabling this as it provides | |
430 | device specific optimized bias to allow/optimize functionality. | |
4c5dabce | 431 | |
0c570674 LD |
432 | config REGULATOR_TPS51632 |
433 | tristate "TI TPS51632 Power Regulator" | |
434 | depends on I2C | |
435 | select REGMAP_I2C | |
436 | help | |
437 | This driver supports TPS51632 voltage regulator chip. | |
7bde7672 | 438 | The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller |
0c570674 LD |
439 | with Serial VID control and DVFS. |
440 | The voltage output can be configure through I2C interface or PWM | |
441 | interface. | |
442 | ||
2edd3b69 LW |
443 | config REGULATOR_TPS6105X |
444 | tristate "TI TPS6105X Power regulators" | |
445 | depends on TPS6105X | |
446 | default y if TPS6105X | |
447 | help | |
448 | This driver supports TPS61050/TPS61052 voltage regulator chips. | |
449 | It is a single boost converter primarily for white LEDs and | |
450 | audio amplifiers. | |
451 | ||
dfb9b8a4 | 452 | config REGULATOR_TPS62360 |
d1cf4f65 | 453 | tristate "TI TPS6236x Power Regulator" |
dfb9b8a4 AL |
454 | depends on I2C |
455 | select REGMAP_I2C | |
456 | help | |
d1cf4f65 | 457 | This driver supports TPS6236x voltage regulator chip. This |
dfb9b8a4 AL |
458 | regulator is meant for processor core supply. This chip is |
459 | high-frequency synchronous step down dc-dc converter optimized | |
460 | for battery-powered portable applications. | |
461 | ||
2de79850 AA |
462 | config REGULATOR_TPS65023 |
463 | tristate "TI TPS65023 Power regulators" | |
464 | depends on I2C | |
90923351 | 465 | select REGMAP_I2C |
2de79850 AA |
466 | help |
467 | This driver supports TPS65023 voltage regulator chips. TPS65023 provides | |
468 | three step-down converters and two general-purpose LDO voltage regulators. | |
469 | It supports TI's software based Class-2 SmartReflex implementation. | |
470 | ||
471 | config REGULATOR_TPS6507X | |
472 | tristate "TI TPS6507X Power regulators" | |
473 | depends on I2C | |
474 | help | |
475 | This driver supports TPS6507X voltage regulator chips. TPS6507X provides | |
476 | three step-down converters and two general-purpose LDO voltage regulators. | |
477 | It supports TI's software based Class-2 SmartReflex implementation. | |
478 | ||
452534e5 VB |
479 | config REGULATOR_TPS65090 |
480 | tristate "TI TPS65090 Power regulator" | |
481 | depends on MFD_TPS65090 | |
482 | help | |
483 | This driver provides support for the voltage regulators on the | |
484 | TI TPS65090 PMIC. | |
485 | ||
a493077f AC |
486 | config REGULATOR_TPS65217 |
487 | tristate "TI TPS65217 Power regulators" | |
488 | depends on MFD_TPS65217 | |
9260ad98 | 489 | help |
a493077f AC |
490 | This driver supports TPS65217 voltage regulator chips. TPS65217 |
491 | provides three step-down converters and four general-purpose LDO | |
492 | voltage regulators. It supports software based voltage control | |
493 | for different voltage domains | |
9260ad98 | 494 | |
1394fd28 CC |
495 | config REGULATOR_TPS6524X |
496 | tristate "TI TPS6524X Power regulators" | |
497 | depends on SPI | |
be0e2d3e | 498 | help |
1394fd28 CC |
499 | This driver supports TPS6524X voltage regulator chips. TPS6524X |
500 | provides three step-down converters and two general-purpose LDO | |
501 | voltage regulators. This device is interfaced using a customized | |
502 | serial interface currently supported on the sequencer serial | |
503 | port controller. | |
be0e2d3e | 504 | |
dfb9b8a4 AL |
505 | config REGULATOR_TPS6586X |
506 | tristate "TI TPS6586X Power regulators" | |
507 | depends on MFD_TPS6586X | |
51bd6943 | 508 | help |
dfb9b8a4 | 509 | This driver supports TPS6586X voltage regulator chips. |
51bd6943 | 510 | |
518fb721 | 511 | config REGULATOR_TPS65910 |
ae0e6544 | 512 | tristate "TI TPS65910/TPS65911 Power Regulators" |
518fb721 | 513 | depends on MFD_TPS65910 |
8b385d9b | 514 | help |
ae0e6544 | 515 | This driver supports TPS65910/TPS65911 voltage regulator chips. |
c789ca20 | 516 | |
dfb9b8a4 AL |
517 | config REGULATOR_TPS65912 |
518 | tristate "TI TPS65912 Power regulator" | |
519 | depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) | |
c789ca20 | 520 | help |
dfb9b8a4 | 521 | This driver supports TPS65912 voltage regulator chip. |
c789ca20 | 522 | |
1a0bb679 LD |
523 | config REGULATOR_TPS80031 |
524 | tristate "TI TPS80031/TPS80032 power regualtor driver" | |
525 | depends on MFD_TPS80031 | |
526 | help | |
527 | TPS80031/ TPS80032 Fully Integrated Power Management with Power | |
528 | Path and Battery Charger. It has 5 configurable step-down | |
529 | converters, 11 general purpose LDOs, VBUS generator and digital | |
530 | output to control regulators. | |
531 | ||
dfb9b8a4 | 532 | config REGULATOR_TWL4030 |
631a1fc4 | 533 | tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" |
dfb9b8a4 | 534 | depends on TWL4030_CORE |
1032fbfd | 535 | help |
dfb9b8a4 AL |
536 | This driver supports the voltage regulators provided by |
537 | this family of companion chips. | |
1032fbfd | 538 | |
31e54086 PM |
539 | config REGULATOR_VEXPRESS |
540 | tristate "Versatile Express regulators" | |
541 | depends on VEXPRESS_CONFIG | |
542 | help | |
543 | This driver provides support for voltage regulators available | |
544 | on the ARM Ltd's Versatile Express platform. | |
545 | ||
dfb9b8a4 AL |
546 | config REGULATOR_WM831X |
547 | tristate "Wolfson Microelectronics WM831x PMIC regulators" | |
548 | depends on MFD_WM831X | |
49610235 | 549 | help |
dfb9b8a4 AL |
550 | Support the voltage and current regulators of the WM831x series |
551 | of PMIC devices. | |
49610235 | 552 | |
dfb9b8a4 AL |
553 | config REGULATOR_WM8350 |
554 | tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" | |
555 | depends on MFD_WM8350 | |
1394fd28 | 556 | help |
dfb9b8a4 | 557 | This driver provides support for the voltage and current regulators |
c6d678b6 | 558 | of the WM8350 AudioPlus PMIC. |
1394fd28 | 559 | |
dfb9b8a4 AL |
560 | config REGULATOR_WM8400 |
561 | tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" | |
562 | depends on MFD_WM8400 | |
518fb721 | 563 | help |
dfb9b8a4 AL |
564 | This driver provides support for the voltage regulators of the |
565 | WM8400 AudioPlus PMIC. | |
518fb721 | 566 | |
dfb9b8a4 AL |
567 | config REGULATOR_WM8994 |
568 | tristate "Wolfson Microelectronics WM8994 CODEC" | |
569 | depends on MFD_WM8994 | |
f7eb6c5e | 570 | help |
dfb9b8a4 AL |
571 | This driver provides support for the voltage regulators on the |
572 | WM8994 CODEC. | |
f7eb6c5e | 573 | |
bbda14df | 574 | endif |
295c08bc | 575 |