Commit | Line | Data |
---|---|---|
bbda14df | 1 | menuconfig REGULATOR |
ba7e4763 | 2 | bool "Voltage and Current Regulator Support" |
ba7e4763 LG |
3 | help |
4 | Generic Voltage and Current Regulator support. | |
5 | ||
6 | This framework is designed to provide a generic interface to voltage | |
7 | and current regulators within the Linux kernel. It's intended to | |
8 | provide voltage and current control to client or consumer drivers and | |
9 | also provide status information to user space applications through a | |
10 | sysfs interface. | |
11 | ||
12 | The intention is to allow systems to dynamically control regulator | |
13 | output in order to save power and prolong battery life. This applies | |
14 | to both voltage regulators (where voltage output is controllable) and | |
15 | current sinks (where current output is controllable). | |
16 | ||
17 | This framework safely compiles out if not selected so that client | |
18 | drivers can still be used in systems with no software controllable | |
19 | regulators. | |
20 | ||
21 | If unsure, say no. | |
22 | ||
809d310c | 23 | |
bbda14df TI |
24 | if REGULATOR |
25 | ||
ba7e4763 LG |
26 | config REGULATOR_DEBUG |
27 | bool "Regulator debug support" | |
ba7e4763 LG |
28 | help |
29 | Say yes here to enable debugging support. | |
30 | ||
31 | config REGULATOR_FIXED_VOLTAGE | |
a9cb63b2 | 32 | tristate "Fixed voltage regulator support" |
a9cb63b2 MB |
33 | help |
34 | This driver provides support for fixed voltage regulators, | |
35 | useful for systems which use a combination of software | |
36 | managed regulators and simple non-configurable regulators. | |
ba7e4763 LG |
37 | |
38 | config REGULATOR_VIRTUAL_CONSUMER | |
39 | tristate "Virtual regulator consumer support" | |
ba7e4763 LG |
40 | help |
41 | This driver provides a virtual consumer for the voltage and | |
c6d678b6 MJ |
42 | current regulator API which provides sysfs controls for |
43 | configuring the supplies requested. This is mainly useful | |
44 | for test purposes. | |
ba7e4763 | 45 | |
c6d678b6 | 46 | If unsure, say no. |
ba7e4763 | 47 | |
1d98cccf MR |
48 | config REGULATOR_USERSPACE_CONSUMER |
49 | tristate "Userspace regulator consumer support" | |
1d98cccf MR |
50 | help |
51 | There are some classes of devices that are controlled entirely | |
6f2653e6 | 52 | from user space. Userspace consumer driver provides ability to |
1d98cccf MR |
53 | control power supplies for such devices. |
54 | ||
c6d678b6 | 55 | If unsure, say no. |
1d98cccf | 56 | |
95f1dc08 CX |
57 | config REGULATOR_88PM800 |
58 | tristate "Marvell 88PM800 Power regulators" | |
7c45f60b | 59 | depends on MFD_88PM800 |
95f1dc08 CX |
60 | help |
61 | This driver supports Marvell 88PM800 voltage regulator chips. | |
62 | It delivers digitally programmable output, | |
63 | the voltage is programmed via I2C interface. | |
64 | It's suitable to support PXA988 chips to control VCC_MAIN and | |
65 | various voltages. | |
66 | ||
82b736df | 67 | config REGULATOR_88PM8607 |
631a1fc4 | 68 | tristate "Marvell 88PM8607 Power regulators" |
82b736df | 69 | depends on MFD_88PM860X=y |
3f0292ae | 70 | help |
82b736df | 71 | This driver supports 88PM8607 voltage regulator chips. |
3f0292ae | 72 | |
33036f48 WY |
73 | config REGULATOR_ACT8865 |
74 | tristate "Active-semi act8865 voltage regulator" | |
75 | depends on I2C | |
76 | select REGMAP_I2C | |
77 | help | |
78 | This driver controls a active-semi act8865 voltage output | |
79 | regulator via I2C bus. | |
80 | ||
dfb9b8a4 AL |
81 | config REGULATOR_AD5398 |
82 | tristate "Analog Devices AD5398/AD5821 regulators" | |
83 | depends on I2C | |
0eb5d5ab | 84 | help |
dfb9b8a4 AL |
85 | This driver supports AD5398 and AD5821 current regulator chips. |
86 | If building into module, its name is ad5398.ko. | |
87 | ||
82b736df MB |
88 | config REGULATOR_ANATOP |
89 | tristate "Freescale i.MX on-chip ANATOP LDO regulators" | |
90 | depends on MFD_SYSCON | |
91 | help | |
92 | Say y here to support Freescale i.MX on-chip ANATOP LDOs | |
93 | regulators. It is recommended that this option be | |
94 | enabled on i.MX6 platform. | |
95 | ||
dfb9b8a4 AL |
96 | config REGULATOR_AAT2870 |
97 | tristate "AnalogicTech AAT2870 Regulators" | |
98 | depends on MFD_AAT2870_CORE | |
99 | help | |
100 | If you have a AnalogicTech AAT2870 say Y to enable the | |
101 | regulator driver. | |
102 | ||
82b736df MB |
103 | config REGULATOR_AB3100 |
104 | tristate "ST-Ericsson AB3100 Regulator functions" | |
105 | depends on AB3100_CORE | |
106 | default y if AB3100_CORE | |
107 | help | |
108 | These regulators correspond to functionality in the | |
109 | AB3100 analog baseband dealing with power regulators | |
110 | for the system. | |
111 | ||
112 | config REGULATOR_AB8500 | |
113 | bool "ST-Ericsson AB8500 Power Regulators" | |
114 | depends on AB8500_CORE | |
115 | help | |
116 | This driver supports the regulators found on the ST-Ericsson mixed | |
117 | signal AB8500 PMIC | |
118 | ||
b667a45d MB |
119 | config REGULATOR_ARIZONA |
120 | tristate "Wolfson Arizona class devices" | |
121 | depends on MFD_ARIZONA | |
e6ed9058 | 122 | depends on SND_SOC |
b667a45d MB |
123 | help |
124 | Support for the regulators found on Wolfson Arizona class | |
125 | devices. | |
126 | ||
82b736df MB |
127 | config REGULATOR_AS3711 |
128 | tristate "AS3711 PMIC" | |
129 | depends on MFD_AS3711 | |
130 | help | |
131 | This driver provides support for the voltage regulators on the | |
132 | AS3711 PMIC | |
133 | ||
bc407334 LD |
134 | config REGULATOR_AS3722 |
135 | tristate "AMS AS3722 PMIC Regulators" | |
136 | depends on MFD_AS3722 | |
137 | help | |
138 | This driver provides support for the voltage regulators on the | |
139 | AS3722 PMIC. This will enable support for all the software | |
140 | controllable DCDC/LDO regulators. | |
141 | ||
dfe7a1b0 CC |
142 | config REGULATOR_AXP20X |
143 | tristate "X-POWERS AXP20X PMIC Regulators" | |
144 | depends on MFD_AXP20X | |
145 | help | |
146 | This driver provides support for the voltage regulators on the | |
147 | AXP20X PMIC. | |
148 | ||
462c9fc5 MP |
149 | config REGULATOR_BCM590XX |
150 | tristate "Broadcom BCM590xx PMU Regulators" | |
151 | depends on MFD_BCM590XX | |
152 | help | |
153 | This driver provides support for the voltage regulators on the | |
154 | BCM590xx PMUs. This will enable support for the software | |
155 | controllable LDO/Switching regulators. | |
156 | ||
dfb9b8a4 AL |
157 | config REGULATOR_DA903X |
158 | tristate "Dialog Semiconductor DA9030/DA9034 regulators" | |
159 | depends on PMIC_DA903X | |
160 | help | |
161 | Say y here to support the BUCKs and LDOs regulators found on | |
162 | Dialog Semiconductor DA9030/DA9034 PMIC. | |
163 | ||
164 | config REGULATOR_DA9052 | |
165 | tristate "Dialog Semiconductor DA9052/DA9053 regulators" | |
166 | depends on PMIC_DA9052 | |
167 | help | |
168 | This driver supports the voltage regulators of DA9052-BC and | |
169 | DA9053-AA/Bx PMIC. | |
170 | ||
f6130be6 AJ |
171 | config REGULATOR_DA9055 |
172 | tristate "Dialog Semiconductor DA9055 regulators" | |
173 | depends on MFD_DA9055 | |
174 | help | |
175 | Say y here to support the BUCKs and LDOs regulators found on | |
176 | Dialog Semiconductor DA9055 PMIC. | |
177 | ||
178 | This driver can also be built as a module. If so, the module | |
179 | will be called da9055-regulator. | |
180 | ||
69ca3e58 KG |
181 | config REGULATOR_DA9063 |
182 | tristate "Dialog Semiconductor DA9063 regulators" | |
183 | depends on MFD_DA9063 | |
184 | help | |
185 | Say y here to support the BUCKs and LDOs regulators found on | |
186 | DA9063 PMICs. | |
187 | ||
188 | This driver can also be built as a module. If so, the module | |
189 | will be called da9063-regulator. | |
190 | ||
16f10918 ST |
191 | config REGULATOR_DA9210 |
192 | tristate "Dialog Semiconductor DA9210 regulator" | |
193 | depends on I2C | |
194 | select REGMAP_I2C | |
195 | help | |
196 | Say y here to support for the Dialog Semiconductor DA9210. | |
197 | The DA9210 is a multi-phase synchronous step down | |
198 | converter 12A DC-DC Buck controlled through an I2C | |
1028a37d JB |
199 | interface. |
200 | ||
201 | config REGULATOR_DA9211 | |
202 | tristate "Dialog Semiconductor DA9211/DA9212 regulator" | |
203 | depends on I2C | |
204 | select REGMAP_I2C | |
205 | help | |
206 | Say y here to support for the Dialog Semiconductor DA9211/DA9212. | |
207 | The DA9211/DA9212 is a multi-phase synchronous step down | |
208 | converter 12A DC-DC Buck controlled through an I2C | |
16f10918 ST |
209 | interface. |
210 | ||
82b736df MB |
211 | config REGULATOR_DBX500_PRCMU |
212 | bool | |
213 | ||
214 | config REGULATOR_DB8500_PRCMU | |
215 | bool "ST-Ericsson DB8500 Voltage Domain Regulators" | |
216 | depends on MFD_DB8500_PRCMU | |
217 | select REGULATOR_DBX500_PRCMU | |
218 | help | |
219 | This driver supports the voltage domain regulators controlled by the | |
220 | DB8500 PRCMU | |
221 | ||
49d8c599 YZ |
222 | config REGULATOR_FAN53555 |
223 | tristate "Fairchild FAN53555 Regulator" | |
224 | depends on I2C | |
225 | select REGMAP_I2C | |
226 | help | |
227 | This driver supports Fairchild FAN53555 Digitally Programmable | |
228 | TinyBuck Regulator. The FAN53555 is a step-down switching voltage | |
229 | regulator that delivers a digitally programmable output from an | |
230 | input voltage supply of 2.5V to 5.5V. The output voltage is | |
231 | programmed through an I2C interface. | |
232 | ||
82b736df MB |
233 | config REGULATOR_GPIO |
234 | tristate "GPIO regulator support" | |
235 | depends on GPIOLIB | |
e3e5aff7 | 236 | help |
82b736df MB |
237 | This driver provides support for regulators that can be |
238 | controlled via gpios. | |
239 | It is capable of supporting current and voltage regulators | |
240 | and the platform has to provide a mapping of GPIO-states | |
241 | to target volts/amps. | |
e3e5aff7 | 242 | |
82b736df MB |
243 | config REGULATOR_ISL6271A |
244 | tristate "Intersil ISL6271A Power regulator" | |
245 | depends on I2C | |
246 | help | |
247 | This driver supports ISL6271A voltage regulator chip. | |
dfb9b8a4 | 248 | |
82b736df MB |
249 | config REGULATOR_LP3971 |
250 | tristate "National Semiconductors LP3971 PMIC regulator driver" | |
251 | depends on I2C | |
dfb9b8a4 | 252 | help |
82b736df MB |
253 | Say Y here to support the voltage regulators and convertors |
254 | on National Semiconductors LP3971 PMIC | |
dfb9b8a4 | 255 | |
82b736df MB |
256 | config REGULATOR_LP3972 |
257 | tristate "National Semiconductors LP3972 PMIC regulator driver" | |
258 | depends on I2C | |
dfb9b8a4 | 259 | help |
82b736df MB |
260 | Say Y here to support the voltage regulators and convertors |
261 | on National Semiconductors LP3972 PMIC | |
dfb9b8a4 | 262 | |
82b736df | 263 | config REGULATOR_LP872X |
631a1fc4 | 264 | tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" |
613965fb | 265 | depends on I2C |
82b736df MB |
266 | select REGMAP_I2C |
267 | help | |
268 | This driver supports LP8720/LP8725 PMIC | |
269 | ||
270 | config REGULATOR_LP8755 | |
271 | tristate "TI LP8755 High Performance PMU driver" | |
dfb9b8a4 | 272 | depends on I2C |
82b736df | 273 | select REGMAP_I2C |
dfb9b8a4 | 274 | help |
82b736df MB |
275 | This driver supports LP8755 High Performance PMU driver. This |
276 | chip contains six step-down DC/DC converters which can support | |
277 | 9 mode multiphase configuration. | |
dfb9b8a4 | 278 | |
82b736df | 279 | config REGULATOR_LP8788 |
631a1fc4 | 280 | tristate "TI LP8788 Power Regulators" |
82b736df | 281 | depends on MFD_LP8788 |
dfb9b8a4 | 282 | help |
82b736df | 283 | This driver supports LP8788 voltage regulator chip. |
0eb5d5ab | 284 | |
3eb2c7ec | 285 | config REGULATOR_LTC3589 |
ac1d6868 AL |
286 | tristate "LTC3589 8-output voltage regulator" |
287 | depends on I2C | |
288 | select REGMAP_I2C | |
3eb2c7ec PZ |
289 | help |
290 | This enables support for the LTC3589, LTC3589-1, and LTC3589-2 | |
291 | 8-output regulators controlled via I2C. | |
292 | ||
b0902bbe | 293 | config REGULATOR_MAX14577 |
8a82b408 | 294 | tristate "Maxim 14577/77836 regulator" |
b0902bbe KK |
295 | depends on MFD_MAX14577 |
296 | help | |
8a82b408 KK |
297 | This driver controls a Maxim MAX14577/77836 regulator via I2C bus. |
298 | The MAX14577 regulators include safeout LDO and charger current | |
299 | regulator. The MAX77836 has two additional LDOs. | |
b0902bbe | 300 | |
55f4fa4e RJ |
301 | config REGULATOR_MAX1586 |
302 | tristate "Maxim 1586/1587 voltage regulator" | |
303 | depends on I2C | |
55f4fa4e RJ |
304 | help |
305 | This driver controls a Maxim 1586 or 1587 voltage output | |
306 | regulator via I2C bus. The provided regulator is suitable | |
307 | for PXA27x chips to control VCC_CORE and VCC_USIM voltages. | |
308 | ||
a71b797f HZ |
309 | config REGULATOR_MAX8649 |
310 | tristate "Maxim 8649 voltage regulator" | |
311 | depends on I2C | |
c5b68d47 | 312 | select REGMAP_I2C |
a71b797f HZ |
313 | help |
314 | This driver controls a Maxim 8649 voltage output regulator via | |
315 | I2C bus. | |
316 | ||
27f37e4b WS |
317 | config REGULATOR_MAX8660 |
318 | tristate "Maxim 8660/8661 voltage regulator" | |
319 | depends on I2C | |
320 | help | |
321 | This driver controls a Maxim 8660/8661 voltage output | |
322 | regulator via I2C bus. | |
323 | ||
ffee1909 GY |
324 | config REGULATOR_MAX8907 |
325 | tristate "Maxim 8907 voltage regulator" | |
326 | depends on MFD_MAX8907 | |
327 | help | |
328 | This driver controls a Maxim 8907 voltage output regulator | |
329 | via I2C bus. The provided regulator is suitable for Tegra | |
330 | chip to control Step-Down DC-DC and LDOs. | |
331 | ||
08ff6f2a HZ |
332 | config REGULATOR_MAX8925 |
333 | tristate "Maxim MAX8925 Power Management IC" | |
334 | depends on MFD_MAX8925 | |
335 | help | |
336 | Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. | |
337 | ||
202f4f53 MH |
338 | config REGULATOR_MAX8952 |
339 | tristate "Maxim MAX8952 Power Management IC" | |
340 | depends on I2C | |
341 | help | |
342 | This driver controls a Maxim 8952 voltage output regulator | |
343 | via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS | |
344 | modes ranging from 0.77V to 1.40V by 0.01V steps. | |
345 | ||
5928f538 LD |
346 | config REGULATOR_MAX8973 |
347 | tristate "Maxim MAX8973 voltage regulator " | |
348 | depends on I2C | |
349 | select REGMAP_I2C | |
350 | help | |
351 | The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down | |
352 | switching regulator delievers up to 9A of output current. Each | |
353 | phase operates at a 2MHz fixed frequency with a 120 deg shift | |
354 | from the adjacent phase, allowing the use of small magnetic component. | |
355 | ||
bd6ca2cf MH |
356 | config REGULATOR_MAX8997 |
357 | tristate "Maxim 8997/8966 regulator" | |
358 | depends on MFD_MAX8997 | |
359 | help | |
360 | This driver controls a Maxim 8997/8966 regulator | |
361 | via I2C bus. The provided regulator is suitable for S5PC110, | |
362 | S5PV210, and Exynos-4 chips to control VCC_CORE and | |
363 | VCC_USIM voltages. | |
364 | ||
156f2528 KP |
365 | config REGULATOR_MAX8998 |
366 | tristate "Maxim 8998 voltage regulator" | |
69f71008 | 367 | depends on MFD_MAX8998 |
156f2528 KP |
368 | help |
369 | This driver controls a Maxim 8998 voltage output regulator | |
370 | via I2C bus. The provided regulator is suitable for S3C6410 | |
371 | and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. | |
372 | ||
133d4016 JL |
373 | config REGULATOR_MAX77686 |
374 | tristate "Maxim 77686 regulator" | |
375 | depends on MFD_MAX77686 | |
376 | help | |
377 | This driver controls a Maxim 77686 regulator | |
378 | via I2C bus. The provided regulator is suitable for | |
379 | Exynos-4 chips to control VARM and VINT voltages. | |
380 | ||
80b022e2 JL |
381 | config REGULATOR_MAX77693 |
382 | tristate "Maxim MAX77693 regulator" | |
383 | depends on MFD_MAX77693 | |
384 | help | |
385 | This driver controls a Maxim 77693 regulator via I2C bus. | |
386 | The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' | |
387 | and one current regulator 'CHARGER'. This is suitable for | |
388 | Exynos-4x12 chips. | |
389 | ||
82b736df MB |
390 | config REGULATOR_MC13XXX_CORE |
391 | tristate | |
5ec271e7 | 392 | |
82b736df MB |
393 | config REGULATOR_MC13783 |
394 | tristate "Freescale MC13783 regulator driver" | |
e5a3da21 | 395 | depends on MFD_MC13XXX |
82b736df | 396 | select REGULATOR_MC13XXX_CORE |
0cbdf7bc | 397 | help |
82b736df MB |
398 | Say y here to support the regulators found on the Freescale MC13783 |
399 | PMIC. | |
0cbdf7bc | 400 | |
82b736df MB |
401 | config REGULATOR_MC13892 |
402 | tristate "Freescale MC13892 regulator driver" | |
403 | depends on MFD_MC13XXX | |
404 | select REGULATOR_MC13XXX_CORE | |
5976f095 | 405 | help |
82b736df MB |
406 | Say y here to support the regulators found on the Freescale MC13892 |
407 | PMIC. | |
5976f095 | 408 | |
82b736df MB |
409 | config REGULATOR_PALMAS |
410 | tristate "TI Palmas PMIC Regulators" | |
411 | depends on MFD_PALMAS | |
af8b5fc3 | 412 | help |
82b736df MB |
413 | If you wish to control the regulators on the Palmas series of |
414 | chips say Y here. This will enable support for all the software | |
415 | controllable SMPS/LDO regulators. | |
af8b5fc3 | 416 | |
82b736df MB |
417 | The regulators available on Palmas series chips vary depending |
418 | on the muxing. This is handled automatically in the driver by | |
419 | reading the mux info from OTP. | |
b59320cc | 420 | |
11469e0b B |
421 | config REGULATOR_PBIAS |
422 | tristate "PBIAS OMAP regulator driver" | |
423 | depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON | |
424 | help | |
425 | Say y here to support pbias regulator for mmc1:SD card i/o | |
426 | on OMAP SoCs. | |
427 | This driver provides support for OMAP pbias modelled | |
428 | regulators. | |
429 | ||
82b736df MB |
430 | config REGULATOR_PCAP |
431 | tristate "Motorola PCAP2 regulator driver" | |
432 | depends on EZX_PCAP | |
ade7515f | 433 | help |
82b736df MB |
434 | This driver provides support for the voltage regulators of the |
435 | PCAP2 PMIC. | |
ade7515f | 436 | |
dfb9b8a4 AL |
437 | config REGULATOR_PCF50633 |
438 | tristate "NXP PCF50633 regulator driver" | |
c6d678b6 | 439 | depends on MFD_PCF50633 |
295c08bc | 440 | help |
dfb9b8a4 AL |
441 | Say Y here to support the voltage regulators and convertors |
442 | on PCF50633 | |
295c08bc | 443 | |
3784b6d6 | 444 | config REGULATOR_PFUZE100 |
2cee2121 | 445 | tristate "Freescale PFUZE100/PFUZE200 regulator driver" |
3784b6d6 | 446 | depends on I2C |
94421b05 | 447 | select REGMAP_I2C |
3784b6d6 | 448 | help |
2cee2121 AL |
449 | Say y here to support the regulators found on the Freescale |
450 | PFUZE100/PFUZE200 PMIC. | |
3784b6d6 | 451 | |
6ffc3270 LD |
452 | config REGULATOR_RC5T583 |
453 | tristate "RICOH RC5T583 Power regulators" | |
454 | depends on MFD_RC5T583 | |
455 | help | |
456 | Select this option to enable the power regulator of RICOH | |
457 | PMIC RC5T583. | |
458 | This driver supports the control of different power rails of device | |
459 | through regulator interface. The device supports multiple DCDC/LDO | |
460 | outputs which can be controlled by i2c communication. | |
461 | ||
2cd64ae3 CZ |
462 | config REGULATOR_RK808 |
463 | tristate "Rockchip RK808 Power regulators" | |
464 | depends on MFD_RK808 | |
465 | help | |
466 | Select this option to enable the power regulator of ROCKCHIP | |
467 | PMIC RK808. | |
468 | This driver supports the control of different power rails of device | |
469 | through regulator interface. The device supports multiple DCDC/LDO | |
470 | outputs which can be controlled by i2c communication. | |
471 | ||
f1879271 SK |
472 | config REGULATOR_S2MPA01 |
473 | tristate "Samsung S2MPA01 voltage regulator" | |
474 | depends on MFD_SEC_CORE | |
475 | help | |
476 | This driver controls Samsung S2MPA01 voltage output regulator | |
477 | via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. | |
478 | ||
cb74685e | 479 | config REGULATOR_S2MPS11 |
cad35c3f | 480 | tristate "Samsung S2MPS11/S2MPS14/S2MPU02 voltage regulator" |
cb74685e SK |
481 | depends on MFD_SEC_CORE |
482 | help | |
cad35c3f | 483 | This driver supports a Samsung S2MPS11/S2MPS14/S2MPU02 voltage output |
15f77300 KK |
484 | regulator via I2C bus. The chip is comprised of high efficient Buck |
485 | converters including Dual-Phase Buck converter, Buck-Boost converter, | |
486 | various LDOs. | |
cb74685e | 487 | |
dfb9b8a4 AL |
488 | config REGULATOR_S5M8767 |
489 | tristate "Samsung S5M8767A voltage regulator" | |
66c9fbb9 | 490 | depends on MFD_SEC_CORE |
5e428d5c | 491 | help |
dfb9b8a4 AL |
492 | This driver supports a Samsung S5M8767A voltage output regulator |
493 | via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and | |
494 | supports DVS mode with 8bits of output voltage control. | |
5e428d5c | 495 | |
4a5d3013 LJ |
496 | config REGULATOR_ST_PWM |
497 | tristate "STMicroelectronics PWM voltage regulator" | |
498 | depends on ARCH_STI | |
499 | help | |
500 | This driver supports ST's PWM controlled voltage regulators. | |
501 | ||
82b736df | 502 | config REGULATOR_TI_ABB |
631a1fc4 | 503 | tristate "TI Adaptive Body Bias on-chip LDO" |
82b736df | 504 | depends on ARCH_OMAP |
4c5dabce | 505 | help |
82b736df MB |
506 | Select this option to support Texas Instruments' on-chip Adaptive Body |
507 | Bias (ABB) LDO regulators. It is recommended that this option be | |
508 | enabled on required TI SoC. Certain Operating Performance Points | |
509 | on TI SoCs may be unstable without enabling this as it provides | |
510 | device specific optimized bias to allow/optimize functionality. | |
4c5dabce | 511 | |
3615a34e LW |
512 | config REGULATOR_STW481X_VMMC |
513 | bool "ST Microelectronics STW481X VMMC regulator" | |
514 | depends on MFD_STW481X | |
515 | default y if MFD_STW481X | |
516 | help | |
517 | This driver supports the internal VMMC regulator in the STw481x | |
518 | PMIC chips. | |
519 | ||
0c570674 LD |
520 | config REGULATOR_TPS51632 |
521 | tristate "TI TPS51632 Power Regulator" | |
522 | depends on I2C | |
523 | select REGMAP_I2C | |
524 | help | |
525 | This driver supports TPS51632 voltage regulator chip. | |
7bde7672 | 526 | The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller |
0c570674 LD |
527 | with Serial VID control and DVFS. |
528 | The voltage output can be configure through I2C interface or PWM | |
529 | interface. | |
530 | ||
2edd3b69 LW |
531 | config REGULATOR_TPS6105X |
532 | tristate "TI TPS6105X Power regulators" | |
533 | depends on TPS6105X | |
534 | default y if TPS6105X | |
535 | help | |
536 | This driver supports TPS61050/TPS61052 voltage regulator chips. | |
537 | It is a single boost converter primarily for white LEDs and | |
538 | audio amplifiers. | |
539 | ||
dfb9b8a4 | 540 | config REGULATOR_TPS62360 |
d1cf4f65 | 541 | tristate "TI TPS6236x Power Regulator" |
dfb9b8a4 AL |
542 | depends on I2C |
543 | select REGMAP_I2C | |
544 | help | |
d1cf4f65 | 545 | This driver supports TPS6236x voltage regulator chip. This |
dfb9b8a4 AL |
546 | regulator is meant for processor core supply. This chip is |
547 | high-frequency synchronous step down dc-dc converter optimized | |
548 | for battery-powered portable applications. | |
549 | ||
2de79850 AA |
550 | config REGULATOR_TPS65023 |
551 | tristate "TI TPS65023 Power regulators" | |
552 | depends on I2C | |
90923351 | 553 | select REGMAP_I2C |
2de79850 AA |
554 | help |
555 | This driver supports TPS65023 voltage regulator chips. TPS65023 provides | |
556 | three step-down converters and two general-purpose LDO voltage regulators. | |
557 | It supports TI's software based Class-2 SmartReflex implementation. | |
558 | ||
559 | config REGULATOR_TPS6507X | |
560 | tristate "TI TPS6507X Power regulators" | |
561 | depends on I2C | |
562 | help | |
563 | This driver supports TPS6507X voltage regulator chips. TPS6507X provides | |
564 | three step-down converters and two general-purpose LDO voltage regulators. | |
565 | It supports TI's software based Class-2 SmartReflex implementation. | |
566 | ||
452534e5 VB |
567 | config REGULATOR_TPS65090 |
568 | tristate "TI TPS65090 Power regulator" | |
569 | depends on MFD_TPS65090 | |
570 | help | |
571 | This driver provides support for the voltage regulators on the | |
572 | TI TPS65090 PMIC. | |
573 | ||
a493077f AC |
574 | config REGULATOR_TPS65217 |
575 | tristate "TI TPS65217 Power regulators" | |
576 | depends on MFD_TPS65217 | |
9260ad98 | 577 | help |
a493077f AC |
578 | This driver supports TPS65217 voltage regulator chips. TPS65217 |
579 | provides three step-down converters and four general-purpose LDO | |
580 | voltage regulators. It supports software based voltage control | |
581 | for different voltage domains | |
9260ad98 | 582 | |
90e7d526 K |
583 | config REGULATOR_TPS65218 |
584 | tristate "TI TPS65218 Power regulators" | |
948838a1 | 585 | depends on MFD_TPS65218 && OF |
90e7d526 K |
586 | help |
587 | This driver supports TPS65218 voltage regulator chips. TPS65218 | |
588 | provides six step-down converters and one general-purpose LDO | |
589 | voltage regulators. It supports software based voltage control | |
590 | for different voltage domains | |
591 | ||
1394fd28 CC |
592 | config REGULATOR_TPS6524X |
593 | tristate "TI TPS6524X Power regulators" | |
594 | depends on SPI | |
be0e2d3e | 595 | help |
1394fd28 CC |
596 | This driver supports TPS6524X voltage regulator chips. TPS6524X |
597 | provides three step-down converters and two general-purpose LDO | |
598 | voltage regulators. This device is interfaced using a customized | |
599 | serial interface currently supported on the sequencer serial | |
600 | port controller. | |
be0e2d3e | 601 | |
dfb9b8a4 AL |
602 | config REGULATOR_TPS6586X |
603 | tristate "TI TPS6586X Power regulators" | |
604 | depends on MFD_TPS6586X | |
51bd6943 | 605 | help |
dfb9b8a4 | 606 | This driver supports TPS6586X voltage regulator chips. |
51bd6943 | 607 | |
518fb721 | 608 | config REGULATOR_TPS65910 |
ae0e6544 | 609 | tristate "TI TPS65910/TPS65911 Power Regulators" |
518fb721 | 610 | depends on MFD_TPS65910 |
8b385d9b | 611 | help |
ae0e6544 | 612 | This driver supports TPS65910/TPS65911 voltage regulator chips. |
c789ca20 | 613 | |
dfb9b8a4 AL |
614 | config REGULATOR_TPS65912 |
615 | tristate "TI TPS65912 Power regulator" | |
616 | depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) | |
c789ca20 | 617 | help |
dfb9b8a4 | 618 | This driver supports TPS65912 voltage regulator chip. |
c789ca20 | 619 | |
1a0bb679 LD |
620 | config REGULATOR_TPS80031 |
621 | tristate "TI TPS80031/TPS80032 power regualtor driver" | |
622 | depends on MFD_TPS80031 | |
623 | help | |
624 | TPS80031/ TPS80032 Fully Integrated Power Management with Power | |
625 | Path and Battery Charger. It has 5 configurable step-down | |
626 | converters, 11 general purpose LDOs, VBUS generator and digital | |
627 | output to control regulators. | |
628 | ||
dfb9b8a4 | 629 | config REGULATOR_TWL4030 |
631a1fc4 | 630 | tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" |
dfb9b8a4 | 631 | depends on TWL4030_CORE |
1032fbfd | 632 | help |
dfb9b8a4 AL |
633 | This driver supports the voltage regulators provided by |
634 | this family of companion chips. | |
1032fbfd | 635 | |
31e54086 PM |
636 | config REGULATOR_VEXPRESS |
637 | tristate "Versatile Express regulators" | |
638 | depends on VEXPRESS_CONFIG | |
639 | help | |
640 | This driver provides support for voltage regulators available | |
641 | on the ARM Ltd's Versatile Express platform. | |
642 | ||
dfb9b8a4 AL |
643 | config REGULATOR_WM831X |
644 | tristate "Wolfson Microelectronics WM831x PMIC regulators" | |
645 | depends on MFD_WM831X | |
49610235 | 646 | help |
dfb9b8a4 AL |
647 | Support the voltage and current regulators of the WM831x series |
648 | of PMIC devices. | |
49610235 | 649 | |
dfb9b8a4 AL |
650 | config REGULATOR_WM8350 |
651 | tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" | |
652 | depends on MFD_WM8350 | |
1394fd28 | 653 | help |
dfb9b8a4 | 654 | This driver provides support for the voltage and current regulators |
c6d678b6 | 655 | of the WM8350 AudioPlus PMIC. |
1394fd28 | 656 | |
dfb9b8a4 AL |
657 | config REGULATOR_WM8400 |
658 | tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" | |
659 | depends on MFD_WM8400 | |
518fb721 | 660 | help |
dfb9b8a4 AL |
661 | This driver provides support for the voltage regulators of the |
662 | WM8400 AudioPlus PMIC. | |
518fb721 | 663 | |
dfb9b8a4 AL |
664 | config REGULATOR_WM8994 |
665 | tristate "Wolfson Microelectronics WM8994 CODEC" | |
666 | depends on MFD_WM8994 | |
f7eb6c5e | 667 | help |
dfb9b8a4 AL |
668 | This driver provides support for the voltage regulators on the |
669 | WM8994 CODEC. | |
f7eb6c5e | 670 | |
bbda14df | 671 | endif |
295c08bc | 672 |