Commit | Line | Data |
---|---|---|
bbda14df | 1 | menuconfig REGULATOR |
ba7e4763 | 2 | bool "Voltage and Current Regulator Support" |
ba7e4763 LG |
3 | help |
4 | Generic Voltage and Current Regulator support. | |
5 | ||
6 | This framework is designed to provide a generic interface to voltage | |
7 | and current regulators within the Linux kernel. It's intended to | |
8 | provide voltage and current control to client or consumer drivers and | |
9 | also provide status information to user space applications through a | |
10 | sysfs interface. | |
11 | ||
12 | The intention is to allow systems to dynamically control regulator | |
13 | output in order to save power and prolong battery life. This applies | |
14 | to both voltage regulators (where voltage output is controllable) and | |
15 | current sinks (where current output is controllable). | |
16 | ||
17 | This framework safely compiles out if not selected so that client | |
18 | drivers can still be used in systems with no software controllable | |
19 | regulators. | |
20 | ||
21 | If unsure, say no. | |
22 | ||
809d310c | 23 | |
bbda14df TI |
24 | if REGULATOR |
25 | ||
ba7e4763 LG |
26 | config REGULATOR_DEBUG |
27 | bool "Regulator debug support" | |
ba7e4763 LG |
28 | help |
29 | Say yes here to enable debugging support. | |
30 | ||
31 | config REGULATOR_FIXED_VOLTAGE | |
a9cb63b2 | 32 | tristate "Fixed voltage regulator support" |
a9cb63b2 MB |
33 | help |
34 | This driver provides support for fixed voltage regulators, | |
35 | useful for systems which use a combination of software | |
36 | managed regulators and simple non-configurable regulators. | |
ba7e4763 LG |
37 | |
38 | config REGULATOR_VIRTUAL_CONSUMER | |
39 | tristate "Virtual regulator consumer support" | |
ba7e4763 LG |
40 | help |
41 | This driver provides a virtual consumer for the voltage and | |
c6d678b6 MJ |
42 | current regulator API which provides sysfs controls for |
43 | configuring the supplies requested. This is mainly useful | |
44 | for test purposes. | |
ba7e4763 | 45 | |
c6d678b6 | 46 | If unsure, say no. |
ba7e4763 | 47 | |
1d98cccf MR |
48 | config REGULATOR_USERSPACE_CONSUMER |
49 | tristate "Userspace regulator consumer support" | |
1d98cccf MR |
50 | help |
51 | There are some classes of devices that are controlled entirely | |
6f2653e6 | 52 | from user space. Userspace consumer driver provides ability to |
1d98cccf MR |
53 | control power supplies for such devices. |
54 | ||
c6d678b6 | 55 | If unsure, say no. |
1d98cccf | 56 | |
95f1dc08 CX |
57 | config REGULATOR_88PM800 |
58 | tristate "Marvell 88PM800 Power regulators" | |
7c45f60b | 59 | depends on MFD_88PM800 |
95f1dc08 CX |
60 | help |
61 | This driver supports Marvell 88PM800 voltage regulator chips. | |
62 | It delivers digitally programmable output, | |
63 | the voltage is programmed via I2C interface. | |
64 | It's suitable to support PXA988 chips to control VCC_MAIN and | |
65 | various voltages. | |
66 | ||
82b736df | 67 | config REGULATOR_88PM8607 |
631a1fc4 | 68 | tristate "Marvell 88PM8607 Power regulators" |
82b736df | 69 | depends on MFD_88PM860X=y |
3f0292ae | 70 | help |
82b736df | 71 | This driver supports 88PM8607 voltage regulator chips. |
3f0292ae | 72 | |
33036f48 WY |
73 | config REGULATOR_ACT8865 |
74 | tristate "Active-semi act8865 voltage regulator" | |
75 | depends on I2C | |
76 | select REGMAP_I2C | |
77 | help | |
78 | This driver controls a active-semi act8865 voltage output | |
79 | regulator via I2C bus. | |
80 | ||
dfb9b8a4 AL |
81 | config REGULATOR_AD5398 |
82 | tristate "Analog Devices AD5398/AD5821 regulators" | |
83 | depends on I2C | |
0eb5d5ab | 84 | help |
dfb9b8a4 AL |
85 | This driver supports AD5398 and AD5821 current regulator chips. |
86 | If building into module, its name is ad5398.ko. | |
87 | ||
82b736df MB |
88 | config REGULATOR_ANATOP |
89 | tristate "Freescale i.MX on-chip ANATOP LDO regulators" | |
90 | depends on MFD_SYSCON | |
91 | help | |
92 | Say y here to support Freescale i.MX on-chip ANATOP LDOs | |
93 | regulators. It is recommended that this option be | |
94 | enabled on i.MX6 platform. | |
95 | ||
dfb9b8a4 AL |
96 | config REGULATOR_AAT2870 |
97 | tristate "AnalogicTech AAT2870 Regulators" | |
98 | depends on MFD_AAT2870_CORE | |
99 | help | |
100 | If you have a AnalogicTech AAT2870 say Y to enable the | |
101 | regulator driver. | |
102 | ||
82b736df MB |
103 | config REGULATOR_AB3100 |
104 | tristate "ST-Ericsson AB3100 Regulator functions" | |
105 | depends on AB3100_CORE | |
106 | default y if AB3100_CORE | |
107 | help | |
108 | These regulators correspond to functionality in the | |
109 | AB3100 analog baseband dealing with power regulators | |
110 | for the system. | |
111 | ||
112 | config REGULATOR_AB8500 | |
113 | bool "ST-Ericsson AB8500 Power Regulators" | |
114 | depends on AB8500_CORE | |
115 | help | |
116 | This driver supports the regulators found on the ST-Ericsson mixed | |
117 | signal AB8500 PMIC | |
118 | ||
b667a45d MB |
119 | config REGULATOR_ARIZONA |
120 | tristate "Wolfson Arizona class devices" | |
121 | depends on MFD_ARIZONA | |
e6ed9058 | 122 | depends on SND_SOC |
b667a45d MB |
123 | help |
124 | Support for the regulators found on Wolfson Arizona class | |
125 | devices. | |
126 | ||
82b736df MB |
127 | config REGULATOR_AS3711 |
128 | tristate "AS3711 PMIC" | |
129 | depends on MFD_AS3711 | |
130 | help | |
131 | This driver provides support for the voltage regulators on the | |
132 | AS3711 PMIC | |
133 | ||
bc407334 LD |
134 | config REGULATOR_AS3722 |
135 | tristate "AMS AS3722 PMIC Regulators" | |
136 | depends on MFD_AS3722 | |
137 | help | |
138 | This driver provides support for the voltage regulators on the | |
139 | AS3722 PMIC. This will enable support for all the software | |
140 | controllable DCDC/LDO regulators. | |
141 | ||
dfb9b8a4 AL |
142 | config REGULATOR_DA903X |
143 | tristate "Dialog Semiconductor DA9030/DA9034 regulators" | |
144 | depends on PMIC_DA903X | |
145 | help | |
146 | Say y here to support the BUCKs and LDOs regulators found on | |
147 | Dialog Semiconductor DA9030/DA9034 PMIC. | |
148 | ||
149 | config REGULATOR_DA9052 | |
150 | tristate "Dialog Semiconductor DA9052/DA9053 regulators" | |
151 | depends on PMIC_DA9052 | |
152 | help | |
153 | This driver supports the voltage regulators of DA9052-BC and | |
154 | DA9053-AA/Bx PMIC. | |
155 | ||
f6130be6 AJ |
156 | config REGULATOR_DA9055 |
157 | tristate "Dialog Semiconductor DA9055 regulators" | |
158 | depends on MFD_DA9055 | |
159 | help | |
160 | Say y here to support the BUCKs and LDOs regulators found on | |
161 | Dialog Semiconductor DA9055 PMIC. | |
162 | ||
163 | This driver can also be built as a module. If so, the module | |
164 | will be called da9055-regulator. | |
165 | ||
69ca3e58 KG |
166 | config REGULATOR_DA9063 |
167 | tristate "Dialog Semiconductor DA9063 regulators" | |
168 | depends on MFD_DA9063 | |
169 | help | |
170 | Say y here to support the BUCKs and LDOs regulators found on | |
171 | DA9063 PMICs. | |
172 | ||
173 | This driver can also be built as a module. If so, the module | |
174 | will be called da9063-regulator. | |
175 | ||
16f10918 ST |
176 | config REGULATOR_DA9210 |
177 | tristate "Dialog Semiconductor DA9210 regulator" | |
178 | depends on I2C | |
179 | select REGMAP_I2C | |
180 | help | |
181 | Say y here to support for the Dialog Semiconductor DA9210. | |
182 | The DA9210 is a multi-phase synchronous step down | |
183 | converter 12A DC-DC Buck controlled through an I2C | |
184 | interface. | |
185 | ||
82b736df MB |
186 | config REGULATOR_DBX500_PRCMU |
187 | bool | |
188 | ||
189 | config REGULATOR_DB8500_PRCMU | |
190 | bool "ST-Ericsson DB8500 Voltage Domain Regulators" | |
191 | depends on MFD_DB8500_PRCMU | |
192 | select REGULATOR_DBX500_PRCMU | |
193 | help | |
194 | This driver supports the voltage domain regulators controlled by the | |
195 | DB8500 PRCMU | |
196 | ||
49d8c599 YZ |
197 | config REGULATOR_FAN53555 |
198 | tristate "Fairchild FAN53555 Regulator" | |
199 | depends on I2C | |
200 | select REGMAP_I2C | |
201 | help | |
202 | This driver supports Fairchild FAN53555 Digitally Programmable | |
203 | TinyBuck Regulator. The FAN53555 is a step-down switching voltage | |
204 | regulator that delivers a digitally programmable output from an | |
205 | input voltage supply of 2.5V to 5.5V. The output voltage is | |
206 | programmed through an I2C interface. | |
207 | ||
82b736df MB |
208 | config REGULATOR_GPIO |
209 | tristate "GPIO regulator support" | |
210 | depends on GPIOLIB | |
e3e5aff7 | 211 | help |
82b736df MB |
212 | This driver provides support for regulators that can be |
213 | controlled via gpios. | |
214 | It is capable of supporting current and voltage regulators | |
215 | and the platform has to provide a mapping of GPIO-states | |
216 | to target volts/amps. | |
e3e5aff7 | 217 | |
82b736df MB |
218 | config REGULATOR_ISL6271A |
219 | tristate "Intersil ISL6271A Power regulator" | |
220 | depends on I2C | |
221 | help | |
222 | This driver supports ISL6271A voltage regulator chip. | |
dfb9b8a4 | 223 | |
82b736df MB |
224 | config REGULATOR_LP3971 |
225 | tristate "National Semiconductors LP3971 PMIC regulator driver" | |
226 | depends on I2C | |
dfb9b8a4 | 227 | help |
82b736df MB |
228 | Say Y here to support the voltage regulators and convertors |
229 | on National Semiconductors LP3971 PMIC | |
dfb9b8a4 | 230 | |
82b736df MB |
231 | config REGULATOR_LP3972 |
232 | tristate "National Semiconductors LP3972 PMIC regulator driver" | |
233 | depends on I2C | |
dfb9b8a4 | 234 | help |
82b736df MB |
235 | Say Y here to support the voltage regulators and convertors |
236 | on National Semiconductors LP3972 PMIC | |
dfb9b8a4 | 237 | |
82b736df | 238 | config REGULATOR_LP872X |
631a1fc4 | 239 | tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" |
613965fb | 240 | depends on I2C |
82b736df MB |
241 | select REGMAP_I2C |
242 | help | |
243 | This driver supports LP8720/LP8725 PMIC | |
244 | ||
245 | config REGULATOR_LP8755 | |
246 | tristate "TI LP8755 High Performance PMU driver" | |
dfb9b8a4 | 247 | depends on I2C |
82b736df | 248 | select REGMAP_I2C |
dfb9b8a4 | 249 | help |
82b736df MB |
250 | This driver supports LP8755 High Performance PMU driver. This |
251 | chip contains six step-down DC/DC converters which can support | |
252 | 9 mode multiphase configuration. | |
dfb9b8a4 | 253 | |
82b736df | 254 | config REGULATOR_LP8788 |
631a1fc4 | 255 | tristate "TI LP8788 Power Regulators" |
82b736df | 256 | depends on MFD_LP8788 |
dfb9b8a4 | 257 | help |
82b736df | 258 | This driver supports LP8788 voltage regulator chip. |
0eb5d5ab | 259 | |
b0902bbe KK |
260 | config REGULATOR_MAX14577 |
261 | tristate "Maxim 14577 regulator" | |
262 | depends on MFD_MAX14577 | |
263 | help | |
264 | This driver controls a Maxim 14577 regulator via I2C bus. | |
265 | The regulators include safeout LDO and current regulator 'CHARGER'. | |
266 | ||
55f4fa4e RJ |
267 | config REGULATOR_MAX1586 |
268 | tristate "Maxim 1586/1587 voltage regulator" | |
269 | depends on I2C | |
55f4fa4e RJ |
270 | help |
271 | This driver controls a Maxim 1586 or 1587 voltage output | |
272 | regulator via I2C bus. The provided regulator is suitable | |
273 | for PXA27x chips to control VCC_CORE and VCC_USIM voltages. | |
274 | ||
a71b797f HZ |
275 | config REGULATOR_MAX8649 |
276 | tristate "Maxim 8649 voltage regulator" | |
277 | depends on I2C | |
c5b68d47 | 278 | select REGMAP_I2C |
a71b797f HZ |
279 | help |
280 | This driver controls a Maxim 8649 voltage output regulator via | |
281 | I2C bus. | |
282 | ||
27f37e4b WS |
283 | config REGULATOR_MAX8660 |
284 | tristate "Maxim 8660/8661 voltage regulator" | |
285 | depends on I2C | |
286 | help | |
287 | This driver controls a Maxim 8660/8661 voltage output | |
288 | regulator via I2C bus. | |
289 | ||
ffee1909 GY |
290 | config REGULATOR_MAX8907 |
291 | tristate "Maxim 8907 voltage regulator" | |
292 | depends on MFD_MAX8907 | |
293 | help | |
294 | This driver controls a Maxim 8907 voltage output regulator | |
295 | via I2C bus. The provided regulator is suitable for Tegra | |
296 | chip to control Step-Down DC-DC and LDOs. | |
297 | ||
08ff6f2a HZ |
298 | config REGULATOR_MAX8925 |
299 | tristate "Maxim MAX8925 Power Management IC" | |
300 | depends on MFD_MAX8925 | |
301 | help | |
302 | Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. | |
303 | ||
202f4f53 MH |
304 | config REGULATOR_MAX8952 |
305 | tristate "Maxim MAX8952 Power Management IC" | |
306 | depends on I2C | |
307 | help | |
308 | This driver controls a Maxim 8952 voltage output regulator | |
309 | via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS | |
310 | modes ranging from 0.77V to 1.40V by 0.01V steps. | |
311 | ||
5928f538 LD |
312 | config REGULATOR_MAX8973 |
313 | tristate "Maxim MAX8973 voltage regulator " | |
314 | depends on I2C | |
315 | select REGMAP_I2C | |
316 | help | |
317 | The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down | |
318 | switching regulator delievers up to 9A of output current. Each | |
319 | phase operates at a 2MHz fixed frequency with a 120 deg shift | |
320 | from the adjacent phase, allowing the use of small magnetic component. | |
321 | ||
bd6ca2cf MH |
322 | config REGULATOR_MAX8997 |
323 | tristate "Maxim 8997/8966 regulator" | |
324 | depends on MFD_MAX8997 | |
325 | help | |
326 | This driver controls a Maxim 8997/8966 regulator | |
327 | via I2C bus. The provided regulator is suitable for S5PC110, | |
328 | S5PV210, and Exynos-4 chips to control VCC_CORE and | |
329 | VCC_USIM voltages. | |
330 | ||
156f2528 KP |
331 | config REGULATOR_MAX8998 |
332 | tristate "Maxim 8998 voltage regulator" | |
69f71008 | 333 | depends on MFD_MAX8998 |
156f2528 KP |
334 | help |
335 | This driver controls a Maxim 8998 voltage output regulator | |
336 | via I2C bus. The provided regulator is suitable for S3C6410 | |
337 | and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. | |
338 | ||
133d4016 JL |
339 | config REGULATOR_MAX77686 |
340 | tristate "Maxim 77686 regulator" | |
341 | depends on MFD_MAX77686 | |
342 | help | |
343 | This driver controls a Maxim 77686 regulator | |
344 | via I2C bus. The provided regulator is suitable for | |
345 | Exynos-4 chips to control VARM and VINT voltages. | |
346 | ||
80b022e2 JL |
347 | config REGULATOR_MAX77693 |
348 | tristate "Maxim MAX77693 regulator" | |
349 | depends on MFD_MAX77693 | |
350 | help | |
351 | This driver controls a Maxim 77693 regulator via I2C bus. | |
352 | The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' | |
353 | and one current regulator 'CHARGER'. This is suitable for | |
354 | Exynos-4x12 chips. | |
355 | ||
82b736df MB |
356 | config REGULATOR_MC13XXX_CORE |
357 | tristate | |
5ec271e7 | 358 | |
82b736df MB |
359 | config REGULATOR_MC13783 |
360 | tristate "Freescale MC13783 regulator driver" | |
e5a3da21 | 361 | depends on MFD_MC13XXX |
82b736df | 362 | select REGULATOR_MC13XXX_CORE |
0cbdf7bc | 363 | help |
82b736df MB |
364 | Say y here to support the regulators found on the Freescale MC13783 |
365 | PMIC. | |
0cbdf7bc | 366 | |
82b736df MB |
367 | config REGULATOR_MC13892 |
368 | tristate "Freescale MC13892 regulator driver" | |
369 | depends on MFD_MC13XXX | |
370 | select REGULATOR_MC13XXX_CORE | |
5976f095 | 371 | help |
82b736df MB |
372 | Say y here to support the regulators found on the Freescale MC13892 |
373 | PMIC. | |
5976f095 | 374 | |
82b736df MB |
375 | config REGULATOR_PALMAS |
376 | tristate "TI Palmas PMIC Regulators" | |
377 | depends on MFD_PALMAS | |
af8b5fc3 | 378 | help |
82b736df MB |
379 | If you wish to control the regulators on the Palmas series of |
380 | chips say Y here. This will enable support for all the software | |
381 | controllable SMPS/LDO regulators. | |
af8b5fc3 | 382 | |
82b736df MB |
383 | The regulators available on Palmas series chips vary depending |
384 | on the muxing. This is handled automatically in the driver by | |
385 | reading the mux info from OTP. | |
b59320cc | 386 | |
82b736df MB |
387 | config REGULATOR_PCAP |
388 | tristate "Motorola PCAP2 regulator driver" | |
389 | depends on EZX_PCAP | |
ade7515f | 390 | help |
82b736df MB |
391 | This driver provides support for the voltage regulators of the |
392 | PCAP2 PMIC. | |
ade7515f | 393 | |
dfb9b8a4 AL |
394 | config REGULATOR_PCF50633 |
395 | tristate "NXP PCF50633 regulator driver" | |
c6d678b6 | 396 | depends on MFD_PCF50633 |
295c08bc | 397 | help |
dfb9b8a4 AL |
398 | Say Y here to support the voltage regulators and convertors |
399 | on PCF50633 | |
295c08bc | 400 | |
3784b6d6 | 401 | config REGULATOR_PFUZE100 |
1eb72f0b | 402 | tristate "Freescale PFUZE100 regulator driver" |
3784b6d6 | 403 | depends on I2C |
94421b05 | 404 | select REGMAP_I2C |
3784b6d6 RG |
405 | help |
406 | Say y here to support the regulators found on the Freescale PFUZE100 | |
407 | PMIC. | |
408 | ||
6ffc3270 LD |
409 | config REGULATOR_RC5T583 |
410 | tristate "RICOH RC5T583 Power regulators" | |
411 | depends on MFD_RC5T583 | |
412 | help | |
413 | Select this option to enable the power regulator of RICOH | |
414 | PMIC RC5T583. | |
415 | This driver supports the control of different power rails of device | |
416 | through regulator interface. The device supports multiple DCDC/LDO | |
417 | outputs which can be controlled by i2c communication. | |
418 | ||
cb74685e SK |
419 | config REGULATOR_S2MPS11 |
420 | tristate "Samsung S2MPS11 voltage regulator" | |
421 | depends on MFD_SEC_CORE | |
422 | help | |
423 | This driver supports a Samsung S2MPS11 voltage output regulator | |
424 | via I2C bus. S2MPS11 is comprised of high efficient Buck converters | |
425 | including Dual-Phase Buck converter, Buck-Boost converter, various LDOs. | |
426 | ||
dfb9b8a4 AL |
427 | config REGULATOR_S5M8767 |
428 | tristate "Samsung S5M8767A voltage regulator" | |
66c9fbb9 | 429 | depends on MFD_SEC_CORE |
5e428d5c | 430 | help |
dfb9b8a4 AL |
431 | This driver supports a Samsung S5M8767A voltage output regulator |
432 | via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and | |
433 | supports DVS mode with 8bits of output voltage control. | |
5e428d5c | 434 | |
82b736df | 435 | config REGULATOR_TI_ABB |
631a1fc4 | 436 | tristate "TI Adaptive Body Bias on-chip LDO" |
82b736df | 437 | depends on ARCH_OMAP |
4c5dabce | 438 | help |
82b736df MB |
439 | Select this option to support Texas Instruments' on-chip Adaptive Body |
440 | Bias (ABB) LDO regulators. It is recommended that this option be | |
441 | enabled on required TI SoC. Certain Operating Performance Points | |
442 | on TI SoCs may be unstable without enabling this as it provides | |
443 | device specific optimized bias to allow/optimize functionality. | |
4c5dabce | 444 | |
3615a34e LW |
445 | config REGULATOR_STW481X_VMMC |
446 | bool "ST Microelectronics STW481X VMMC regulator" | |
447 | depends on MFD_STW481X | |
448 | default y if MFD_STW481X | |
449 | help | |
450 | This driver supports the internal VMMC regulator in the STw481x | |
451 | PMIC chips. | |
452 | ||
0c570674 LD |
453 | config REGULATOR_TPS51632 |
454 | tristate "TI TPS51632 Power Regulator" | |
455 | depends on I2C | |
456 | select REGMAP_I2C | |
457 | help | |
458 | This driver supports TPS51632 voltage regulator chip. | |
7bde7672 | 459 | The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller |
0c570674 LD |
460 | with Serial VID control and DVFS. |
461 | The voltage output can be configure through I2C interface or PWM | |
462 | interface. | |
463 | ||
2edd3b69 LW |
464 | config REGULATOR_TPS6105X |
465 | tristate "TI TPS6105X Power regulators" | |
466 | depends on TPS6105X | |
467 | default y if TPS6105X | |
468 | help | |
469 | This driver supports TPS61050/TPS61052 voltage regulator chips. | |
470 | It is a single boost converter primarily for white LEDs and | |
471 | audio amplifiers. | |
472 | ||
dfb9b8a4 | 473 | config REGULATOR_TPS62360 |
d1cf4f65 | 474 | tristate "TI TPS6236x Power Regulator" |
dfb9b8a4 AL |
475 | depends on I2C |
476 | select REGMAP_I2C | |
477 | help | |
d1cf4f65 | 478 | This driver supports TPS6236x voltage regulator chip. This |
dfb9b8a4 AL |
479 | regulator is meant for processor core supply. This chip is |
480 | high-frequency synchronous step down dc-dc converter optimized | |
481 | for battery-powered portable applications. | |
482 | ||
2de79850 AA |
483 | config REGULATOR_TPS65023 |
484 | tristate "TI TPS65023 Power regulators" | |
485 | depends on I2C | |
90923351 | 486 | select REGMAP_I2C |
2de79850 AA |
487 | help |
488 | This driver supports TPS65023 voltage regulator chips. TPS65023 provides | |
489 | three step-down converters and two general-purpose LDO voltage regulators. | |
490 | It supports TI's software based Class-2 SmartReflex implementation. | |
491 | ||
492 | config REGULATOR_TPS6507X | |
493 | tristate "TI TPS6507X Power regulators" | |
494 | depends on I2C | |
495 | help | |
496 | This driver supports TPS6507X voltage regulator chips. TPS6507X provides | |
497 | three step-down converters and two general-purpose LDO voltage regulators. | |
498 | It supports TI's software based Class-2 SmartReflex implementation. | |
499 | ||
452534e5 VB |
500 | config REGULATOR_TPS65090 |
501 | tristate "TI TPS65090 Power regulator" | |
502 | depends on MFD_TPS65090 | |
503 | help | |
504 | This driver provides support for the voltage regulators on the | |
505 | TI TPS65090 PMIC. | |
506 | ||
a493077f AC |
507 | config REGULATOR_TPS65217 |
508 | tristate "TI TPS65217 Power regulators" | |
509 | depends on MFD_TPS65217 | |
9260ad98 | 510 | help |
a493077f AC |
511 | This driver supports TPS65217 voltage regulator chips. TPS65217 |
512 | provides three step-down converters and four general-purpose LDO | |
513 | voltage regulators. It supports software based voltage control | |
514 | for different voltage domains | |
9260ad98 | 515 | |
1394fd28 CC |
516 | config REGULATOR_TPS6524X |
517 | tristate "TI TPS6524X Power regulators" | |
518 | depends on SPI | |
be0e2d3e | 519 | help |
1394fd28 CC |
520 | This driver supports TPS6524X voltage regulator chips. TPS6524X |
521 | provides three step-down converters and two general-purpose LDO | |
522 | voltage regulators. This device is interfaced using a customized | |
523 | serial interface currently supported on the sequencer serial | |
524 | port controller. | |
be0e2d3e | 525 | |
dfb9b8a4 AL |
526 | config REGULATOR_TPS6586X |
527 | tristate "TI TPS6586X Power regulators" | |
528 | depends on MFD_TPS6586X | |
51bd6943 | 529 | help |
dfb9b8a4 | 530 | This driver supports TPS6586X voltage regulator chips. |
51bd6943 | 531 | |
518fb721 | 532 | config REGULATOR_TPS65910 |
ae0e6544 | 533 | tristate "TI TPS65910/TPS65911 Power Regulators" |
518fb721 | 534 | depends on MFD_TPS65910 |
8b385d9b | 535 | help |
ae0e6544 | 536 | This driver supports TPS65910/TPS65911 voltage regulator chips. |
c789ca20 | 537 | |
dfb9b8a4 AL |
538 | config REGULATOR_TPS65912 |
539 | tristate "TI TPS65912 Power regulator" | |
540 | depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) | |
c789ca20 | 541 | help |
dfb9b8a4 | 542 | This driver supports TPS65912 voltage regulator chip. |
c789ca20 | 543 | |
1a0bb679 LD |
544 | config REGULATOR_TPS80031 |
545 | tristate "TI TPS80031/TPS80032 power regualtor driver" | |
546 | depends on MFD_TPS80031 | |
547 | help | |
548 | TPS80031/ TPS80032 Fully Integrated Power Management with Power | |
549 | Path and Battery Charger. It has 5 configurable step-down | |
550 | converters, 11 general purpose LDOs, VBUS generator and digital | |
551 | output to control regulators. | |
552 | ||
dfb9b8a4 | 553 | config REGULATOR_TWL4030 |
631a1fc4 | 554 | tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" |
dfb9b8a4 | 555 | depends on TWL4030_CORE |
1032fbfd | 556 | help |
dfb9b8a4 AL |
557 | This driver supports the voltage regulators provided by |
558 | this family of companion chips. | |
1032fbfd | 559 | |
31e54086 PM |
560 | config REGULATOR_VEXPRESS |
561 | tristate "Versatile Express regulators" | |
562 | depends on VEXPRESS_CONFIG | |
563 | help | |
564 | This driver provides support for voltage regulators available | |
565 | on the ARM Ltd's Versatile Express platform. | |
566 | ||
dfb9b8a4 AL |
567 | config REGULATOR_WM831X |
568 | tristate "Wolfson Microelectronics WM831x PMIC regulators" | |
569 | depends on MFD_WM831X | |
49610235 | 570 | help |
dfb9b8a4 AL |
571 | Support the voltage and current regulators of the WM831x series |
572 | of PMIC devices. | |
49610235 | 573 | |
dfb9b8a4 AL |
574 | config REGULATOR_WM8350 |
575 | tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" | |
576 | depends on MFD_WM8350 | |
1394fd28 | 577 | help |
dfb9b8a4 | 578 | This driver provides support for the voltage and current regulators |
c6d678b6 | 579 | of the WM8350 AudioPlus PMIC. |
1394fd28 | 580 | |
dfb9b8a4 AL |
581 | config REGULATOR_WM8400 |
582 | tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" | |
583 | depends on MFD_WM8400 | |
518fb721 | 584 | help |
dfb9b8a4 AL |
585 | This driver provides support for the voltage regulators of the |
586 | WM8400 AudioPlus PMIC. | |
518fb721 | 587 | |
dfb9b8a4 AL |
588 | config REGULATOR_WM8994 |
589 | tristate "Wolfson Microelectronics WM8994 CODEC" | |
590 | depends on MFD_WM8994 | |
f7eb6c5e | 591 | help |
dfb9b8a4 AL |
592 | This driver provides support for the voltage regulators on the |
593 | WM8994 CODEC. | |
f7eb6c5e | 594 | |
bbda14df | 595 | endif |
295c08bc | 596 |