Commit | Line | Data |
---|---|---|
33036f48 WY |
1 | /* |
2 | * act8865-regulator.c - Voltage regulation for the active-semi ACT8865 | |
3 | * http://www.active-semi.com/sheets/ACT8865_Datasheet.pdf | |
4 | * | |
5 | * Copyright (C) 2013 Atmel Corporation | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | */ | |
17 | ||
18 | #include <linux/module.h> | |
19 | #include <linux/init.h> | |
20 | #include <linux/i2c.h> | |
21 | #include <linux/err.h> | |
22 | #include <linux/platform_device.h> | |
23 | #include <linux/regulator/driver.h> | |
24 | #include <linux/regulator/act8865.h> | |
25 | #include <linux/of.h> | |
26 | #include <linux/of_device.h> | |
27 | #include <linux/regulator/of_regulator.h> | |
28 | #include <linux/regmap.h> | |
29 | ||
30 | /* | |
31 | * ACT8865 Global Register Map. | |
32 | */ | |
33 | #define ACT8865_SYS_MODE 0x00 | |
34 | #define ACT8865_SYS_CTRL 0x01 | |
35 | #define ACT8865_DCDC1_VSET1 0x20 | |
36 | #define ACT8865_DCDC1_VSET2 0x21 | |
37 | #define ACT8865_DCDC1_CTRL 0x22 | |
38 | #define ACT8865_DCDC2_VSET1 0x30 | |
39 | #define ACT8865_DCDC2_VSET2 0x31 | |
40 | #define ACT8865_DCDC2_CTRL 0x32 | |
41 | #define ACT8865_DCDC3_VSET1 0x40 | |
42 | #define ACT8865_DCDC3_VSET2 0x41 | |
43 | #define ACT8865_DCDC3_CTRL 0x42 | |
44 | #define ACT8865_LDO1_VSET 0x50 | |
45 | #define ACT8865_LDO1_CTRL 0x51 | |
46 | #define ACT8865_LDO2_VSET 0x54 | |
47 | #define ACT8865_LDO2_CTRL 0x55 | |
48 | #define ACT8865_LDO3_VSET 0x60 | |
49 | #define ACT8865_LDO3_CTRL 0x61 | |
50 | #define ACT8865_LDO4_VSET 0x64 | |
51 | #define ACT8865_LDO4_CTRL 0x65 | |
52 | ||
53 | /* | |
54 | * Field Definitions. | |
55 | */ | |
56 | #define ACT8865_ENA 0x80 /* ON - [7] */ | |
57 | #define ACT8865_VSEL_MASK 0x3F /* VSET - [5:0] */ | |
58 | ||
59 | /* | |
60 | * ACT8865 voltage number | |
61 | */ | |
62 | #define ACT8865_VOLTAGE_NUM 64 | |
63 | ||
64 | struct act8865 { | |
65 | struct regulator_dev *rdev[ACT8865_REG_NUM]; | |
66 | struct regmap *regmap; | |
67 | }; | |
68 | ||
69 | static const struct regmap_config act8865_regmap_config = { | |
70 | .reg_bits = 8, | |
71 | .val_bits = 8, | |
72 | }; | |
73 | ||
74 | static const struct regulator_linear_range act8865_volatge_ranges[] = { | |
75 | REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000), | |
76 | REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000), | |
77 | REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000), | |
78 | }; | |
79 | ||
80 | static struct regulator_ops act8865_ops = { | |
81 | .list_voltage = regulator_list_voltage_linear_range, | |
82 | .map_voltage = regulator_map_voltage_linear_range, | |
83 | .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
84 | .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
85 | .enable = regulator_enable_regmap, | |
86 | .disable = regulator_disable_regmap, | |
87 | .is_enabled = regulator_is_enabled_regmap, | |
33036f48 WY |
88 | }; |
89 | ||
90 | static const struct regulator_desc act8865_reg[] = { | |
91 | { | |
92 | .name = "DCDC_REG1", | |
93 | .id = ACT8865_ID_DCDC1, | |
94 | .ops = &act8865_ops, | |
95 | .type = REGULATOR_VOLTAGE, | |
96 | .n_voltages = ACT8865_VOLTAGE_NUM, | |
97 | .linear_ranges = act8865_volatge_ranges, | |
98 | .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges), | |
99 | .vsel_reg = ACT8865_DCDC1_VSET1, | |
100 | .vsel_mask = ACT8865_VSEL_MASK, | |
101 | .enable_reg = ACT8865_DCDC1_CTRL, | |
102 | .enable_mask = ACT8865_ENA, | |
103 | .owner = THIS_MODULE, | |
104 | }, | |
105 | { | |
106 | .name = "DCDC_REG2", | |
107 | .id = ACT8865_ID_DCDC2, | |
108 | .ops = &act8865_ops, | |
109 | .type = REGULATOR_VOLTAGE, | |
110 | .n_voltages = ACT8865_VOLTAGE_NUM, | |
111 | .linear_ranges = act8865_volatge_ranges, | |
112 | .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges), | |
113 | .vsel_reg = ACT8865_DCDC2_VSET1, | |
114 | .vsel_mask = ACT8865_VSEL_MASK, | |
115 | .enable_reg = ACT8865_DCDC2_CTRL, | |
116 | .enable_mask = ACT8865_ENA, | |
117 | .owner = THIS_MODULE, | |
118 | }, | |
119 | { | |
120 | .name = "DCDC_REG3", | |
121 | .id = ACT8865_ID_DCDC3, | |
122 | .ops = &act8865_ops, | |
123 | .type = REGULATOR_VOLTAGE, | |
124 | .n_voltages = ACT8865_VOLTAGE_NUM, | |
125 | .linear_ranges = act8865_volatge_ranges, | |
126 | .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges), | |
127 | .vsel_reg = ACT8865_DCDC3_VSET1, | |
128 | .vsel_mask = ACT8865_VSEL_MASK, | |
129 | .enable_reg = ACT8865_DCDC3_CTRL, | |
130 | .enable_mask = ACT8865_ENA, | |
131 | .owner = THIS_MODULE, | |
132 | }, | |
133 | { | |
134 | .name = "LDO_REG1", | |
135 | .id = ACT8865_ID_LDO1, | |
136 | .ops = &act8865_ops, | |
137 | .type = REGULATOR_VOLTAGE, | |
138 | .n_voltages = ACT8865_VOLTAGE_NUM, | |
139 | .linear_ranges = act8865_volatge_ranges, | |
140 | .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges), | |
141 | .vsel_reg = ACT8865_LDO1_VSET, | |
142 | .vsel_mask = ACT8865_VSEL_MASK, | |
143 | .enable_reg = ACT8865_LDO1_CTRL, | |
144 | .enable_mask = ACT8865_ENA, | |
145 | .owner = THIS_MODULE, | |
146 | }, | |
147 | { | |
148 | .name = "LDO_REG2", | |
149 | .id = ACT8865_ID_LDO2, | |
150 | .ops = &act8865_ops, | |
151 | .type = REGULATOR_VOLTAGE, | |
152 | .n_voltages = ACT8865_VOLTAGE_NUM, | |
153 | .linear_ranges = act8865_volatge_ranges, | |
154 | .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges), | |
155 | .vsel_reg = ACT8865_LDO2_VSET, | |
156 | .vsel_mask = ACT8865_VSEL_MASK, | |
157 | .enable_reg = ACT8865_LDO2_CTRL, | |
158 | .enable_mask = ACT8865_ENA, | |
159 | .owner = THIS_MODULE, | |
160 | }, | |
161 | { | |
162 | .name = "LDO_REG3", | |
163 | .id = ACT8865_ID_LDO3, | |
164 | .ops = &act8865_ops, | |
165 | .type = REGULATOR_VOLTAGE, | |
166 | .n_voltages = ACT8865_VOLTAGE_NUM, | |
167 | .linear_ranges = act8865_volatge_ranges, | |
168 | .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges), | |
169 | .vsel_reg = ACT8865_LDO3_VSET, | |
170 | .vsel_mask = ACT8865_VSEL_MASK, | |
171 | .enable_reg = ACT8865_LDO3_CTRL, | |
172 | .enable_mask = ACT8865_ENA, | |
173 | .owner = THIS_MODULE, | |
174 | }, | |
175 | { | |
176 | .name = "LDO_REG4", | |
177 | .id = ACT8865_ID_LDO4, | |
178 | .ops = &act8865_ops, | |
179 | .type = REGULATOR_VOLTAGE, | |
180 | .n_voltages = ACT8865_VOLTAGE_NUM, | |
181 | .linear_ranges = act8865_volatge_ranges, | |
182 | .n_linear_ranges = ARRAY_SIZE(act8865_volatge_ranges), | |
183 | .vsel_reg = ACT8865_LDO4_VSET, | |
184 | .vsel_mask = ACT8865_VSEL_MASK, | |
185 | .enable_reg = ACT8865_LDO4_CTRL, | |
186 | .enable_mask = ACT8865_ENA, | |
187 | .owner = THIS_MODULE, | |
188 | }, | |
189 | }; | |
190 | ||
191 | #ifdef CONFIG_OF | |
192 | static const struct of_device_id act8865_dt_ids[] = { | |
193 | { .compatible = "active-semi,act8865" }, | |
194 | { } | |
195 | }; | |
196 | MODULE_DEVICE_TABLE(of, act8865_dt_ids); | |
197 | ||
198 | static struct of_regulator_match act8865_matches[] = { | |
199 | [ACT8865_ID_DCDC1] = { .name = "DCDC_REG1"}, | |
200 | [ACT8865_ID_DCDC2] = { .name = "DCDC_REG2"}, | |
201 | [ACT8865_ID_DCDC3] = { .name = "DCDC_REG3"}, | |
202 | [ACT8865_ID_LDO1] = { .name = "LDO_REG1"}, | |
203 | [ACT8865_ID_LDO2] = { .name = "LDO_REG2"}, | |
204 | [ACT8865_ID_LDO3] = { .name = "LDO_REG3"}, | |
205 | [ACT8865_ID_LDO4] = { .name = "LDO_REG4"}, | |
206 | }; | |
207 | ||
208 | static int act8865_pdata_from_dt(struct device *dev, | |
209 | struct device_node **of_node, | |
210 | struct act8865_platform_data *pdata) | |
211 | { | |
212 | int matched, i; | |
213 | struct device_node *np; | |
214 | struct act8865_regulator_data *regulator; | |
215 | ||
216 | np = of_find_node_by_name(dev->of_node, "regulators"); | |
217 | if (!np) { | |
218 | dev_err(dev, "missing 'regulators' subnode in DT\n"); | |
219 | return -EINVAL; | |
220 | } | |
221 | ||
222 | matched = of_regulator_match(dev, np, | |
223 | act8865_matches, ARRAY_SIZE(act8865_matches)); | |
224 | if (matched <= 0) | |
225 | return matched; | |
226 | ||
227 | pdata->regulators = devm_kzalloc(dev, | |
d04b7552 WY |
228 | sizeof(struct act8865_regulator_data) * |
229 | ARRAY_SIZE(act8865_matches), GFP_KERNEL); | |
33036f48 WY |
230 | if (!pdata->regulators) { |
231 | dev_err(dev, "%s: failed to allocate act8865 registor\n", | |
232 | __func__); | |
233 | return -ENOMEM; | |
234 | } | |
235 | ||
236 | pdata->num_regulators = matched; | |
237 | regulator = pdata->regulators; | |
238 | ||
d04b7552 | 239 | for (i = 0; i < ARRAY_SIZE(act8865_matches); i++) { |
33036f48 WY |
240 | regulator->id = i; |
241 | regulator->name = act8865_matches[i].name; | |
242 | regulator->platform_data = act8865_matches[i].init_data; | |
243 | of_node[i] = act8865_matches[i].of_node; | |
244 | regulator++; | |
245 | } | |
246 | ||
247 | return 0; | |
248 | } | |
249 | #else | |
250 | static inline int act8865_pdata_from_dt(struct device *dev, | |
251 | struct device_node **of_node, | |
252 | struct act8865_platform_data *pdata) | |
253 | { | |
254 | return 0; | |
255 | } | |
256 | #endif | |
257 | ||
258 | static int act8865_pmic_probe(struct i2c_client *client, | |
259 | const struct i2c_device_id *i2c_id) | |
260 | { | |
261 | struct regulator_dev **rdev; | |
262 | struct device *dev = &client->dev; | |
263 | struct act8865_platform_data *pdata = dev_get_platdata(dev); | |
264 | struct regulator_config config = { }; | |
265 | struct act8865 *act8865; | |
266 | struct device_node *of_node[ACT8865_REG_NUM]; | |
267 | int i, id; | |
268 | int ret = -EINVAL; | |
269 | int error; | |
270 | ||
271 | if (dev->of_node && !pdata) { | |
272 | const struct of_device_id *id; | |
273 | struct act8865_platform_data pdata_of; | |
274 | ||
275 | id = of_match_device(of_match_ptr(act8865_dt_ids), dev); | |
276 | if (!id) | |
277 | return -ENODEV; | |
278 | ||
279 | ret = act8865_pdata_from_dt(dev, of_node, &pdata_of); | |
280 | if (ret < 0) | |
281 | return ret; | |
282 | ||
283 | pdata = &pdata_of; | |
284 | } | |
285 | ||
286 | if (pdata->num_regulators > ACT8865_REG_NUM) { | |
287 | dev_err(dev, "Too many regulators found!\n"); | |
288 | return -EINVAL; | |
289 | } | |
290 | ||
f1de2c2f | 291 | act8865 = devm_kzalloc(dev, sizeof(struct act8865), GFP_KERNEL); |
33036f48 WY |
292 | if (!act8865) |
293 | return -ENOMEM; | |
294 | ||
295 | rdev = act8865->rdev; | |
296 | ||
297 | act8865->regmap = devm_regmap_init_i2c(client, &act8865_regmap_config); | |
298 | if (IS_ERR(act8865->regmap)) { | |
299 | error = PTR_ERR(act8865->regmap); | |
300 | dev_err(&client->dev, "Failed to allocate register map: %d\n", | |
301 | error); | |
302 | return error; | |
303 | } | |
304 | ||
305 | /* Finally register devices */ | |
a8659ba4 | 306 | for (i = 0; i < ACT8865_REG_NUM; i++) { |
33036f48 WY |
307 | |
308 | id = pdata->regulators[i].id; | |
309 | ||
310 | config.dev = dev; | |
311 | config.init_data = pdata->regulators[i].platform_data; | |
312 | config.of_node = of_node[i]; | |
313 | config.driver_data = act8865; | |
314 | config.regmap = act8865->regmap; | |
315 | ||
316 | rdev[i] = devm_regulator_register(&client->dev, | |
317 | &act8865_reg[i], &config); | |
318 | if (IS_ERR(rdev[i])) { | |
319 | dev_err(dev, "failed to register %s\n", | |
320 | act8865_reg[id].name); | |
321 | return PTR_ERR(rdev[i]); | |
322 | } | |
323 | } | |
324 | ||
325 | i2c_set_clientdata(client, act8865); | |
326 | ||
327 | return 0; | |
328 | } | |
329 | ||
33036f48 WY |
330 | static const struct i2c_device_id act8865_ids[] = { |
331 | { "act8865", 0 }, | |
332 | { }, | |
333 | }; | |
334 | MODULE_DEVICE_TABLE(i2c, act8865_ids); | |
335 | ||
336 | static struct i2c_driver act8865_pmic_driver = { | |
337 | .driver = { | |
338 | .name = "act8865", | |
339 | .owner = THIS_MODULE, | |
340 | }, | |
341 | .probe = act8865_pmic_probe, | |
33036f48 WY |
342 | .id_table = act8865_ids, |
343 | }; | |
344 | ||
345 | module_i2c_driver(act8865_pmic_driver); | |
346 | ||
347 | MODULE_DESCRIPTION("active-semi act8865 voltage regulator driver"); | |
348 | MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); | |
349 | MODULE_LICENSE("GPL v2"); |