Commit | Line | Data |
---|---|---|
202f4f53 MH |
1 | /* |
2 | * max8952.c - Voltage and current regulation for the Maxim 8952 | |
3 | * | |
4 | * Copyright (C) 2010 Samsung Electronics | |
5 | * MyungJoo Ham <myungjoo.ham@samsung.com> | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program; if not, write to the Free Software | |
19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
20 | */ | |
21 | ||
22 | #include <linux/module.h> | |
23 | #include <linux/init.h> | |
24 | #include <linux/i2c.h> | |
25 | #include <linux/err.h> | |
26 | #include <linux/platform_device.h> | |
27 | #include <linux/regulator/driver.h> | |
28 | #include <linux/regulator/max8952.h> | |
202f4f53 MH |
29 | #include <linux/gpio.h> |
30 | #include <linux/io.h> | |
3ff4aa95 TF |
31 | #include <linux/of.h> |
32 | #include <linux/of_gpio.h> | |
33 | #include <linux/regulator/of_regulator.h> | |
202f4f53 MH |
34 | #include <linux/slab.h> |
35 | ||
36 | /* Registers */ | |
37 | enum { | |
38 | MAX8952_REG_MODE0, | |
39 | MAX8952_REG_MODE1, | |
40 | MAX8952_REG_MODE2, | |
41 | MAX8952_REG_MODE3, | |
42 | MAX8952_REG_CONTROL, | |
43 | MAX8952_REG_SYNC, | |
44 | MAX8952_REG_RAMP, | |
45 | MAX8952_REG_CHIP_ID1, | |
46 | MAX8952_REG_CHIP_ID2, | |
47 | }; | |
48 | ||
49 | struct max8952_data { | |
50 | struct i2c_client *client; | |
51 | struct device *dev; | |
202f4f53 MH |
52 | struct max8952_platform_data *pdata; |
53 | struct regulator_dev *rdev; | |
54 | ||
55 | bool vid0; | |
56 | bool vid1; | |
202f4f53 MH |
57 | }; |
58 | ||
59 | static int max8952_read_reg(struct max8952_data *max8952, u8 reg) | |
60 | { | |
61 | int ret = i2c_smbus_read_byte_data(max8952->client, reg); | |
62 | if (ret > 0) | |
63 | ret &= 0xff; | |
64 | ||
65 | return ret; | |
66 | } | |
67 | ||
68 | static int max8952_write_reg(struct max8952_data *max8952, | |
69 | u8 reg, u8 value) | |
70 | { | |
71 | return i2c_smbus_write_byte_data(max8952->client, reg, value); | |
72 | } | |
73 | ||
202f4f53 MH |
74 | static int max8952_list_voltage(struct regulator_dev *rdev, |
75 | unsigned int selector) | |
76 | { | |
77 | struct max8952_data *max8952 = rdev_get_drvdata(rdev); | |
78 | ||
79 | if (rdev_get_id(rdev) != 0) | |
80 | return -EINVAL; | |
81 | ||
b9b49af5 | 82 | return (max8952->pdata->dvs_mode[selector] * 10 + 770) * 1000; |
202f4f53 MH |
83 | } |
84 | ||
b9b49af5 | 85 | static int max8952_get_voltage_sel(struct regulator_dev *rdev) |
202f4f53 MH |
86 | { |
87 | struct max8952_data *max8952 = rdev_get_drvdata(rdev); | |
88 | u8 vid = 0; | |
89 | ||
90 | if (max8952->vid0) | |
91 | vid += 1; | |
92 | if (max8952->vid1) | |
93 | vid += 2; | |
94 | ||
b9b49af5 | 95 | return vid; |
202f4f53 MH |
96 | } |
97 | ||
6ea67d04 AL |
98 | static int max8952_set_voltage_sel(struct regulator_dev *rdev, |
99 | unsigned selector) | |
202f4f53 MH |
100 | { |
101 | struct max8952_data *max8952 = rdev_get_drvdata(rdev); | |
202f4f53 MH |
102 | |
103 | if (!gpio_is_valid(max8952->pdata->gpio_vid0) || | |
e2cf3137 | 104 | !gpio_is_valid(max8952->pdata->gpio_vid1)) { |
202f4f53 MH |
105 | /* DVS not supported */ |
106 | return -EPERM; | |
107 | } | |
108 | ||
6ea67d04 AL |
109 | max8952->vid0 = selector & 0x1; |
110 | max8952->vid1 = (selector >> 1) & 0x1; | |
111 | gpio_set_value(max8952->pdata->gpio_vid0, max8952->vid0); | |
112 | gpio_set_value(max8952->pdata->gpio_vid1, max8952->vid1); | |
202f4f53 MH |
113 | |
114 | return 0; | |
115 | } | |
116 | ||
117 | static struct regulator_ops max8952_ops = { | |
118 | .list_voltage = max8952_list_voltage, | |
b9b49af5 | 119 | .get_voltage_sel = max8952_get_voltage_sel, |
6ea67d04 | 120 | .set_voltage_sel = max8952_set_voltage_sel, |
202f4f53 MH |
121 | }; |
122 | ||
bd6ff0d6 | 123 | static const struct regulator_desc regulator = { |
202f4f53 MH |
124 | .name = "MAX8952_VOUT", |
125 | .id = 0, | |
126 | .n_voltages = MAX8952_NUM_DVS_MODE, | |
127 | .ops = &max8952_ops, | |
128 | .type = REGULATOR_VOLTAGE, | |
129 | .owner = THIS_MODULE, | |
130 | }; | |
131 | ||
3ff4aa95 TF |
132 | #ifdef CONFIG_OF |
133 | static struct of_device_id max8952_dt_match[] = { | |
134 | { .compatible = "maxim,max8952" }, | |
135 | {}, | |
136 | }; | |
137 | MODULE_DEVICE_TABLE(of, max8952_dt_match); | |
138 | ||
139 | static struct max8952_platform_data *max8952_parse_dt(struct device *dev) | |
140 | { | |
141 | struct max8952_platform_data *pd; | |
142 | struct device_node *np = dev->of_node; | |
143 | int ret; | |
144 | int i; | |
145 | ||
146 | pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); | |
147 | if (!pd) { | |
148 | dev_err(dev, "Failed to allocate platform data\n"); | |
149 | return NULL; | |
150 | } | |
151 | ||
152 | pd->gpio_vid0 = of_get_named_gpio(np, "max8952,vid-gpios", 0); | |
153 | pd->gpio_vid1 = of_get_named_gpio(np, "max8952,vid-gpios", 1); | |
154 | pd->gpio_en = of_get_named_gpio(np, "max8952,en-gpio", 0); | |
155 | ||
156 | if (of_property_read_u32(np, "max8952,default-mode", &pd->default_mode)) | |
157 | dev_warn(dev, "Default mode not specified, assuming 0\n"); | |
158 | ||
159 | ret = of_property_read_u32_array(np, "max8952,dvs-mode-microvolt", | |
160 | pd->dvs_mode, ARRAY_SIZE(pd->dvs_mode)); | |
161 | if (ret) { | |
162 | dev_err(dev, "max8952,dvs-mode-microvolt property not specified"); | |
163 | return NULL; | |
164 | } | |
165 | ||
166 | for (i = 0; i < ARRAY_SIZE(pd->dvs_mode); ++i) { | |
167 | if (pd->dvs_mode[i] < 770000 || pd->dvs_mode[i] > 1400000) { | |
168 | dev_err(dev, "DVS voltage %d out of range\n", i); | |
169 | return NULL; | |
170 | } | |
171 | pd->dvs_mode[i] = (pd->dvs_mode[i] - 770000) / 10000; | |
172 | } | |
173 | ||
174 | if (of_property_read_u32(np, "max8952,sync-freq", &pd->sync_freq)) | |
175 | dev_warn(dev, "max8952,sync-freq property not specified, defaulting to 26MHz\n"); | |
176 | ||
177 | if (of_property_read_u32(np, "max8952,ramp-speed", &pd->ramp_speed)) | |
178 | dev_warn(dev, "max8952,ramp-speed property not specified, defaulting to 32mV/us\n"); | |
179 | ||
180 | pd->reg_data = of_get_regulator_init_data(dev, np); | |
181 | if (!pd->reg_data) { | |
182 | dev_err(dev, "Failed to parse regulator init data\n"); | |
183 | return NULL; | |
184 | } | |
185 | ||
186 | return pd; | |
187 | } | |
188 | #else | |
189 | static struct max8952_platform_data *max8952_parse_dt(struct device *dev) | |
190 | { | |
191 | return NULL; | |
192 | } | |
193 | #endif | |
194 | ||
a5023574 | 195 | static int max8952_pmic_probe(struct i2c_client *client, |
202f4f53 MH |
196 | const struct i2c_device_id *i2c_id) |
197 | { | |
198 | struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); | |
dff91d0b | 199 | struct max8952_platform_data *pdata = dev_get_platdata(&client->dev); |
c172708d | 200 | struct regulator_config config = { }; |
202f4f53 MH |
201 | struct max8952_data *max8952; |
202 | ||
203 | int ret = 0, err = 0; | |
204 | ||
3ff4aa95 TF |
205 | if (client->dev.of_node) |
206 | pdata = max8952_parse_dt(&client->dev); | |
207 | ||
202f4f53 MH |
208 | if (!pdata) { |
209 | dev_err(&client->dev, "Require the platform data\n"); | |
210 | return -EINVAL; | |
211 | } | |
212 | ||
213 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) | |
214 | return -EIO; | |
215 | ||
372de4aa AL |
216 | max8952 = devm_kzalloc(&client->dev, sizeof(struct max8952_data), |
217 | GFP_KERNEL); | |
202f4f53 MH |
218 | if (!max8952) |
219 | return -ENOMEM; | |
220 | ||
221 | max8952->client = client; | |
222 | max8952->dev = &client->dev; | |
223 | max8952->pdata = pdata; | |
202f4f53 | 224 | |
c172708d | 225 | config.dev = max8952->dev; |
3ec6eb9c | 226 | config.init_data = pdata->reg_data; |
c172708d | 227 | config.driver_data = max8952; |
71622e15 | 228 | config.of_node = client->dev.of_node; |
c172708d | 229 | |
b669e0ad | 230 | config.ena_gpio = pdata->gpio_en; |
3ec6eb9c | 231 | if (pdata->reg_data->constraints.boot_on) |
b669e0ad AL |
232 | config.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; |
233 | ||
c172708d | 234 | max8952->rdev = regulator_register(®ulator, &config); |
202f4f53 | 235 | |
da05738e AL |
236 | if (IS_ERR(max8952->rdev)) { |
237 | ret = PTR_ERR(max8952->rdev); | |
202f4f53 | 238 | dev_err(max8952->dev, "regulator init failed (%d)\n", ret); |
372de4aa | 239 | return ret; |
da05738e | 240 | } |
202f4f53 | 241 | |
c8237f01 AL |
242 | max8952->vid0 = pdata->default_mode & 0x1; |
243 | max8952->vid1 = (pdata->default_mode >> 1) & 0x1; | |
202f4f53 | 244 | |
202f4f53 MH |
245 | if (gpio_is_valid(pdata->gpio_vid0) && |
246 | gpio_is_valid(pdata->gpio_vid1)) { | |
247 | if (!gpio_request(pdata->gpio_vid0, "MAX8952 VID0")) | |
248 | gpio_direction_output(pdata->gpio_vid0, | |
c8237f01 | 249 | (pdata->default_mode) & 0x1); |
202f4f53 MH |
250 | else |
251 | err = 1; | |
252 | ||
253 | if (!gpio_request(pdata->gpio_vid1, "MAX8952 VID1")) | |
254 | gpio_direction_output(pdata->gpio_vid1, | |
c8237f01 | 255 | (pdata->default_mode >> 1) & 0x1); |
202f4f53 MH |
256 | else { |
257 | if (!err) | |
258 | gpio_free(pdata->gpio_vid0); | |
259 | err = 2; | |
260 | } | |
261 | ||
262 | } else | |
263 | err = 3; | |
264 | ||
265 | if (err) { | |
266 | dev_warn(max8952->dev, "VID0/1 gpio invalid: " | |
25985edc | 267 | "DVS not available.\n"); |
202f4f53 MH |
268 | max8952->vid0 = 0; |
269 | max8952->vid1 = 0; | |
270 | /* Mark invalid */ | |
271 | pdata->gpio_vid0 = -1; | |
272 | pdata->gpio_vid1 = -1; | |
273 | ||
274 | /* Disable Pulldown of EN only */ | |
275 | max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x60); | |
276 | ||
277 | dev_err(max8952->dev, "DVS modes disabled because VID0 and VID1" | |
278 | " do not have proper controls.\n"); | |
279 | } else { | |
280 | /* | |
281 | * Disable Pulldown on EN, VID0, VID1 to reduce | |
282 | * leakage current of MAX8952 assuming that MAX8952 | |
283 | * is turned on (EN==1). Note that without having VID0/1 | |
284 | * properly connected, turning pulldown off can be | |
285 | * problematic. Thus, turn this off only when they are | |
286 | * controllable by GPIO. | |
287 | */ | |
288 | max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x0); | |
289 | } | |
290 | ||
291 | max8952_write_reg(max8952, MAX8952_REG_MODE0, | |
292 | (max8952_read_reg(max8952, | |
293 | MAX8952_REG_MODE0) & 0xC0) | | |
294 | (pdata->dvs_mode[0] & 0x3F)); | |
295 | max8952_write_reg(max8952, MAX8952_REG_MODE1, | |
296 | (max8952_read_reg(max8952, | |
297 | MAX8952_REG_MODE1) & 0xC0) | | |
298 | (pdata->dvs_mode[1] & 0x3F)); | |
299 | max8952_write_reg(max8952, MAX8952_REG_MODE2, | |
300 | (max8952_read_reg(max8952, | |
301 | MAX8952_REG_MODE2) & 0xC0) | | |
302 | (pdata->dvs_mode[2] & 0x3F)); | |
303 | max8952_write_reg(max8952, MAX8952_REG_MODE3, | |
304 | (max8952_read_reg(max8952, | |
305 | MAX8952_REG_MODE3) & 0xC0) | | |
306 | (pdata->dvs_mode[3] & 0x3F)); | |
307 | ||
308 | max8952_write_reg(max8952, MAX8952_REG_SYNC, | |
309 | (max8952_read_reg(max8952, MAX8952_REG_SYNC) & 0x3F) | | |
310 | ((pdata->sync_freq & 0x3) << 6)); | |
311 | max8952_write_reg(max8952, MAX8952_REG_RAMP, | |
312 | (max8952_read_reg(max8952, MAX8952_REG_RAMP) & 0x1F) | | |
313 | ((pdata->ramp_speed & 0x7) << 5)); | |
314 | ||
315 | i2c_set_clientdata(client, max8952); | |
316 | ||
da05738e | 317 | return 0; |
202f4f53 MH |
318 | } |
319 | ||
8dc995f5 | 320 | static int max8952_pmic_remove(struct i2c_client *client) |
202f4f53 MH |
321 | { |
322 | struct max8952_data *max8952 = i2c_get_clientdata(client); | |
323 | struct max8952_platform_data *pdata = max8952->pdata; | |
324 | struct regulator_dev *rdev = max8952->rdev; | |
325 | ||
326 | regulator_unregister(rdev); | |
327 | ||
328 | gpio_free(pdata->gpio_vid0); | |
329 | gpio_free(pdata->gpio_vid1); | |
202f4f53 MH |
330 | return 0; |
331 | } | |
332 | ||
333 | static const struct i2c_device_id max8952_ids[] = { | |
334 | { "max8952", 0 }, | |
335 | { }, | |
336 | }; | |
337 | MODULE_DEVICE_TABLE(i2c, max8952_ids); | |
338 | ||
339 | static struct i2c_driver max8952_pmic_driver = { | |
340 | .probe = max8952_pmic_probe, | |
5eb9f2b9 | 341 | .remove = max8952_pmic_remove, |
202f4f53 MH |
342 | .driver = { |
343 | .name = "max8952", | |
3ff4aa95 | 344 | .of_match_table = of_match_ptr(max8952_dt_match), |
202f4f53 MH |
345 | }, |
346 | .id_table = max8952_ids, | |
347 | }; | |
348 | ||
349 | static int __init max8952_pmic_init(void) | |
350 | { | |
351 | return i2c_add_driver(&max8952_pmic_driver); | |
352 | } | |
353 | subsys_initcall(max8952_pmic_init); | |
354 | ||
355 | static void __exit max8952_pmic_exit(void) | |
356 | { | |
357 | i2c_del_driver(&max8952_pmic_driver); | |
358 | } | |
359 | module_exit(max8952_pmic_exit); | |
360 | ||
361 | MODULE_DESCRIPTION("MAXIM 8952 voltage regulator driver"); | |
362 | MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); | |
363 | MODULE_LICENSE("GPL"); |