[deliverable/linux.git] / drivers / regulator / rk808-regulator.c

/*
 * Regulator driver for Rockchip RK808
 *
 * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
 *
 * Author: Chris Zhong <zyw@rock-chips.com>
 * Author: Zhang Qing <zhangqing@rock-chips.com>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 */

#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/mfd/rk808.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
#include <linux/gpio/consumer.h>

/* Field Definitions */
#define RK808_BUCK_VSEL_MASK	0x3f
#define RK808_BUCK4_VSEL_MASK	0xf
#define RK808_LDO_VSEL_MASK	0x1f

/* Ramp rate definitions for buck1 / buck2 only */
#define RK808_RAMP_RATE_OFFSET		3
#define RK808_RAMP_RATE_MASK		(3 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_2MV_PER_US	(0 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_4MV_PER_US	(1 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_6MV_PER_US	(2 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_10MV_PER_US	(3 << RK808_RAMP_RATE_OFFSET)

#define RK808_DVS2_POL		BIT(2)
#define RK808_DVS1_POL		BIT(1)

/* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */
#define RK808_SLP_REG_OFFSET 1

/* Offset from XXX_ON_VSEL to XXX_DVS_VSEL */
#define RK808_DVS_REG_OFFSET 2

/* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */
#define RK808_SLP_SET_OFF_REG_OFFSET 2

/* max steps for increase voltage of Buck1/2, equal 100mv*/
#define MAX_STEPS_ONE_TIME 8

#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg,	\
	_vmask, _ereg, _emask, _etime)					\
	[_id] = {							\
		.name		= (_match),				\
		.supply_name	= (_supply),				\
		.of_match	= of_match_ptr(_match),			\
		.regulators_node = of_match_ptr("regulators"),		\
		.type		= REGULATOR_VOLTAGE,			\
		.id		= (_id),				\
		.n_voltages	= (((_max) - (_min)) / (_step) + 1),	\
		.owner		= THIS_MODULE,				\
		.min_uV		= (_min) * 1000,			\
		.uV_step	= (_step) * 1000,			\
		.vsel_reg	= (_vreg),				\
		.vsel_mask	= (_vmask),				\
		.enable_reg	= (_ereg),				\
		.enable_mask	= (_emask),				\
		.enable_time	= (_etime),				\
		.ops		= &rk808_reg_ops,			\
	}

#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask)		\
	[_id] = {							\
		.name		= (_match),				\
		.supply_name	= (_supply),				\
		.of_match	= of_match_ptr(_match),			\
		.regulators_node = of_match_ptr("regulators"),		\
		.type		= REGULATOR_VOLTAGE,			\
		.id		= (_id),				\
		.enable_reg	= (_ereg),				\
		.enable_mask	= (_emask),				\
		.owner		= THIS_MODULE,				\
		.ops		= &rk808_switch_ops			\
	}


struct rk808_regulator_data {
	struct gpio_desc *dvs_gpio[2];
};

static const int rk808_buck_config_regs[] = {
	RK808_BUCK1_CONFIG_REG,
	RK808_BUCK2_CONFIG_REG,
	RK808_BUCK3_CONFIG_REG,
	RK808_BUCK4_CONFIG_REG,
};

static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
	REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
	REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
};

static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
{
	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
	int id = rdev->desc->id - RK808_ID_DCDC1;
	struct gpio_desc *gpio = pdata->dvs_gpio[id];
	unsigned int val;
	int ret;

	if (!gpio || gpiod_get_value(gpio) == 0)
		return regulator_get_voltage_sel_regmap(rdev);

	ret = regmap_read(rdev->regmap,
			  rdev->desc->vsel_reg + RK808_DVS_REG_OFFSET,
			  &val);
	if (ret != 0)
		return ret;

	val &= rdev->desc->vsel_mask;
	val >>= ffs(rdev->desc->vsel_mask) - 1;

	return val;
}

static int rk808_buck1_2_i2c_set_voltage_sel(struct regulator_dev *rdev,
					     unsigned sel)
{
	int ret, delta_sel;
	unsigned int old_sel, tmp, val, mask = rdev->desc->vsel_mask;

	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
	if (ret != 0)
		return ret;

	tmp = val & ~mask;
	old_sel = val & mask;
	old_sel >>= ffs(mask) - 1;
	delta_sel = sel - old_sel;

	/*
	 * If directly modify the register to change the voltage, we will face
	 * the risk of overshoot. Put it into a multi-step, can effectively
	 * avoid this problem, a step is 100mv here.
	 */
	while (delta_sel > MAX_STEPS_ONE_TIME) {
		old_sel += MAX_STEPS_ONE_TIME;
		val = old_sel << (ffs(mask) - 1);
		val |= tmp;

		/*
		 * i2c is 400kHz (2.5us per bit) and we must transmit _at least_
		 * 3 bytes (24 bits) plus start and stop so 26 bits.  So we've
		 * got more than 65 us between each voltage change and thus
		 * won't ramp faster than ~1500 uV / us.
		 */
		ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
		delta_sel = sel - old_sel;
	}

	sel <<= ffs(mask) - 1;
	val = tmp | sel;
	ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);

	/*
	 * When we change the voltage register directly, the ramp rate is about
	 * 100000uv/us, wait 1us to make sure the target voltage to be stable,
	 * so we needn't wait extra time after that.
	 */
	udelay(1);

	return ret;
}

static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev,
					 unsigned sel)
{
	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
	int id = rdev->desc->id - RK808_ID_DCDC1;
	struct gpio_desc *gpio = pdata->dvs_gpio[id];
	unsigned int reg = rdev->desc->vsel_reg;
	unsigned old_sel;
	int ret, gpio_level;

	if (!gpio)
		return rk808_buck1_2_i2c_set_voltage_sel(rdev, sel);

	gpio_level = gpiod_get_value(gpio);
	if (gpio_level == 0) {
		reg += RK808_DVS_REG_OFFSET;
		ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &old_sel);
	} else {
		ret = regmap_read(rdev->regmap,
				  reg + RK808_DVS_REG_OFFSET,
				  &old_sel);
	}

	if (ret != 0)
		return ret;

	sel <<= ffs(rdev->desc->vsel_mask) - 1;
	sel |= old_sel & ~rdev->desc->vsel_mask;

	ret = regmap_write(rdev->regmap, reg, sel);
	if (ret)
		return ret;

	gpiod_set_value(gpio, !gpio_level);

	return ret;
}

static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
				       unsigned int old_selector,
				       unsigned int new_selector)
{
	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
	int id = rdev->desc->id - RK808_ID_DCDC1;
	struct gpio_desc *gpio = pdata->dvs_gpio[id];

	/* if there is no dvs1/2 pin, we don't need wait extra time here. */
	if (!gpio)
		return 0;

	return regulator_set_voltage_time_sel(rdev, old_selector, new_selector);
}

static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
	unsigned int ramp_value = RK808_RAMP_RATE_10MV_PER_US;
	unsigned int reg = rk808_buck_config_regs[rdev->desc->id -
						  RK808_ID_DCDC1];

	switch (ramp_delay) {
	case 1 ... 2000:
		ramp_value = RK808_RAMP_RATE_2MV_PER_US;
		break;
	case 2001 ... 4000:
		ramp_value = RK808_RAMP_RATE_4MV_PER_US;
		break;
	case 4001 ... 6000:
		ramp_value = RK808_RAMP_RATE_6MV_PER_US;
		break;
	case 6001 ... 10000:
		break;
	default:
		pr_warn("%s ramp_delay: %d not supported, setting 10000\n",
			rdev->desc->name, ramp_delay);
	}

	return regmap_update_bits(rdev->regmap, reg,
				  RK808_RAMP_RATE_MASK, ramp_value);
}

static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
{
	unsigned int reg;
	int sel = regulator_map_voltage_linear(rdev, uv, uv);

	if (sel < 0)
		return -EINVAL;

	reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;

	return regmap_update_bits(rdev->regmap, reg,
				  rdev->desc->vsel_mask,
				  sel);
}

static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
{
	unsigned int reg;
	int sel = regulator_map_voltage_linear_range(rdev, uv, uv);

	if (sel < 0)
		return -EINVAL;

	reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;

	return regmap_update_bits(rdev->regmap, reg,
				  rdev->desc->vsel_mask,
				  sel);
}

static int rk808_set_suspend_enable(struct regulator_dev *rdev)
{
	unsigned int reg;

	reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;

	return regmap_update_bits(rdev->regmap, reg,
				  rdev->desc->enable_mask,
				  0);
}

static int rk808_set_suspend_disable(struct regulator_dev *rdev)
{
	unsigned int reg;

	reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;

	return regmap_update_bits(rdev->regmap, reg,
				  rdev->desc->enable_mask,
				  rdev->desc->enable_mask);
}

static struct regulator_ops rk808_buck1_2_ops = {
	.list_voltage		= regulator_list_voltage_linear,
	.map_voltage		= regulator_map_voltage_linear,
	.get_voltage_sel	= rk808_buck1_2_get_voltage_sel_regmap,
	.set_voltage_sel	= rk808_buck1_2_set_voltage_sel,
	.set_voltage_time_sel	= rk808_buck1_2_set_voltage_time_sel,
	.enable			= regulator_enable_regmap,
	.disable		= regulator_disable_regmap,
	.is_enabled		= regulator_is_enabled_regmap,
	.set_ramp_delay		= rk808_set_ramp_delay,
	.set_suspend_voltage	= rk808_set_suspend_voltage,
	.set_suspend_enable	= rk808_set_suspend_enable,
	.set_suspend_disable	= rk808_set_suspend_disable,
};

static struct regulator_ops rk808_reg_ops = {
	.list_voltage		= regulator_list_voltage_linear,
	.map_voltage		= regulator_map_voltage_linear,
	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
	.enable			= regulator_enable_regmap,
	.disable		= regulator_disable_regmap,
	.is_enabled		= regulator_is_enabled_regmap,
	.set_suspend_voltage	= rk808_set_suspend_voltage,
	.set_suspend_enable	= rk808_set_suspend_enable,
	.set_suspend_disable	= rk808_set_suspend_disable,
};

static struct regulator_ops rk808_reg_ops_ranges = {
	.list_voltage		= regulator_list_voltage_linear_range,
	.map_voltage		= regulator_map_voltage_linear_range,
	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
	.enable			= regulator_enable_regmap,
	.disable		= regulator_disable_regmap,
	.is_enabled		= regulator_is_enabled_regmap,
	.set_suspend_voltage	= rk808_set_suspend_voltage_range,
	.set_suspend_enable	= rk808_set_suspend_enable,
	.set_suspend_disable	= rk808_set_suspend_disable,
};

static struct regulator_ops rk808_switch_ops = {
	.enable			= regulator_enable_regmap,
	.disable		= regulator_disable_regmap,
	.is_enabled		= regulator_is_enabled_regmap,
	.set_suspend_enable	= rk808_set_suspend_enable,
	.set_suspend_disable	= rk808_set_suspend_disable,
};

static const struct regulator_desc rk808_reg[] = {
	{
		.name = "DCDC_REG1",
		.supply_name = "vcc1",
		.of_match = of_match_ptr("DCDC_REG1"),
		.regulators_node = of_match_ptr("regulators"),
		.id = RK808_ID_DCDC1,
		.ops = &rk808_buck1_2_ops,
		.type = REGULATOR_VOLTAGE,
		.min_uV = 712500,
		.uV_step = 12500,
		.n_voltages = 64,
		.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
		.vsel_mask = RK808_BUCK_VSEL_MASK,
		.enable_reg = RK808_DCDC_EN_REG,
		.enable_mask = BIT(0),
		.owner = THIS_MODULE,
	}, {
		.name = "DCDC_REG2",
		.supply_name = "vcc2",
		.of_match = of_match_ptr("DCDC_REG2"),
		.regulators_node = of_match_ptr("regulators"),
		.id = RK808_ID_DCDC2,
		.ops = &rk808_buck1_2_ops,
		.type = REGULATOR_VOLTAGE,
		.min_uV = 712500,
		.uV_step = 12500,
		.n_voltages = 64,
		.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
		.vsel_mask = RK808_BUCK_VSEL_MASK,
		.enable_reg = RK808_DCDC_EN_REG,
		.enable_mask = BIT(1),
		.owner = THIS_MODULE,
	}, {
		.name = "DCDC_REG3",
		.supply_name = "vcc3",
		.of_match = of_match_ptr("DCDC_REG3"),
		.regulators_node = of_match_ptr("regulators"),
		.id = RK808_ID_DCDC3,
		.ops = &rk808_switch_ops,
		.type = REGULATOR_VOLTAGE,
		.n_voltages = 1,
		.enable_reg = RK808_DCDC_EN_REG,
		.enable_mask = BIT(2),
		.owner = THIS_MODULE,
	},
	RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
		RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
		RK808_DCDC_EN_REG, BIT(3), 0),
	RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
		RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
		BIT(0), 400),
	RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
		RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
		BIT(1), 400),
	{
		.name = "LDO_REG3",
		.supply_name = "vcc7",
		.of_match = of_match_ptr("LDO_REG3"),
		.regulators_node = of_match_ptr("regulators"),
		.id = RK808_ID_LDO3,
		.ops = &rk808_reg_ops_ranges,
		.type = REGULATOR_VOLTAGE,
		.n_voltages = 16,
		.linear_ranges = rk808_ldo3_voltage_ranges,
		.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
		.vsel_reg = RK808_LDO3_ON_VSEL_REG,
		.vsel_mask = RK808_BUCK4_VSEL_MASK,
		.enable_reg = RK808_LDO_EN_REG,
		.enable_mask = BIT(2),
		.enable_time = 400,
		.owner = THIS_MODULE,
	},
	RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
		RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
		BIT(3), 400),
	RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
		RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
		BIT(4), 400),
	RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
		RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
		BIT(5), 400),
	RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
		RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
		BIT(6), 400),
	RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
		RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
		BIT(7), 400),
	RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
		RK808_DCDC_EN_REG, BIT(5)),
	RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
		RK808_DCDC_EN_REG, BIT(6)),
};

static int rk808_regulator_dt_parse_pdata(struct device *dev,
				   struct device *client_dev,
				   struct regmap *map,
				   struct rk808_regulator_data *pdata)
{
	struct device_node *np;
	int tmp, ret = 0, i;

	np = of_get_child_by_name(client_dev->of_node, "regulators");
	if (!np)
		return -ENXIO;

	for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
		pdata->dvs_gpio[i] =
			devm_gpiod_get_index_optional(client_dev, "dvs", i,
						      GPIOD_OUT_LOW);
		if (IS_ERR(pdata->dvs_gpio[i])) {
			ret = PTR_ERR(pdata->dvs_gpio[i]);
			dev_err(dev, "failed to get dvs%d gpio (%d)\n", i, ret);
			goto dt_parse_end;
		}

		if (!pdata->dvs_gpio[i]) {
			dev_warn(dev, "there is no dvs%d gpio\n", i);
			continue;
		}

		tmp = i ? RK808_DVS2_POL : RK808_DVS1_POL;
		ret = regmap_update_bits(map, RK808_IO_POL_REG, tmp,
				gpiod_is_active_low(pdata->dvs_gpio[i]) ?
				0 : tmp);
	}

dt_parse_end:
	of_node_put(np);
	return ret;
}

static int rk808_regulator_probe(struct platform_device *pdev)
{
	struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
	struct i2c_client *client = rk808->i2c;
	struct regulator_config config = {};
	struct regulator_dev *rk808_rdev;
	struct rk808_regulator_data *pdata;
	int ret, i;

	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
	if (!pdata)
		return -ENOMEM;

	ret = rk808_regulator_dt_parse_pdata(&pdev->dev, &client->dev,
					     rk808->regmap, pdata);
	if (ret < 0)
		return ret;

	platform_set_drvdata(pdev, pdata);

	config.dev = &client->dev;
	config.driver_data = pdata;
	config.regmap = rk808->regmap;

	/* Instantiate the regulators */
	for (i = 0; i < RK808_NUM_REGULATORS; i++) {
		rk808_rdev = devm_regulator_register(&pdev->dev,
						     &rk808_reg[i], &config);
		if (IS_ERR(rk808_rdev)) {
			dev_err(&client->dev,
				"failed to register %d regulator\n", i);
			return PTR_ERR(rk808_rdev);
		}
	}

	return 0;
}

static struct platform_driver rk808_regulator_driver = {
	.probe = rk808_regulator_probe,
	.driver = {
		.name = "rk808-regulator",
		.owner = THIS_MODULE,
	},
};

module_platform_driver(rk808_regulator_driver);

MODULE_DESCRIPTION("regulator driver for the rk808 series PMICs");
MODULE_AUTHOR("Chris Zhong<zyw@rock-chips.com>");
MODULE_AUTHOR("Zhang Qing<zhangqing@rock-chips.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:rk808-regulator");
Commit	Line	Data
2cd64ae3 CZ	1	/*
	2	* Regulator driver for Rockchip RK808
	3	*
	4	* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
	5	*
	6	* Author: Chris Zhong <zyw@rock-chips.com>
	7	* Author: Zhang Qing <zhangqing@rock-chips.com>
	8	*
	9	* This program is free software; you can redistribute it and/or modify it
	10	* under the terms and conditions of the GNU General Public License,
	11	* version 2, as published by the Free Software Foundation.
	12	*
	13	* This program is distributed in the hope it will be useful, but WITHOUT
	14	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	15	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	16	* more details.
2cd64ae3 CZ	17	*/
2cd64ae3 CZ	18
bad47ad2 CZ	19	#include <linux/delay.h>
bad47ad2 CZ	20	#include <linux/gpio.h>
2cd64ae3	21	#include <linux/i2c.h>
bad47ad2	22	#include <linux/module.h>
2cd64ae3	23	#include <linux/of_device.h>
bad47ad2 CZ	24	#include <linux/of_gpio.h>
bad47ad2 CZ	25	#include <linux/mfd/rk808.h>
2cd64ae3 CZ	26	#include <linux/regulator/driver.h>
2cd64ae3 CZ	27	#include <linux/regulator/of_regulator.h>
604d4994	28	#include <linux/gpio/consumer.h>
571a4010 CZ	29
571a4010 CZ	30	/* Field Definitions */
2cd64ae3 CZ	31	#define RK808_BUCK_VSEL_MASK 0x3f
	32	#define RK808_BUCK4_VSEL_MASK 0xf
	33	#define RK808_LDO_VSEL_MASK 0x1f
	34
8af25227 DA	35	/* Ramp rate definitions for buck1 / buck2 only */
	36	#define RK808_RAMP_RATE_OFFSET 3
	37	#define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET)
	38	#define RK808_RAMP_RATE_2MV_PER_US (0 << RK808_RAMP_RATE_OFFSET)
	39	#define RK808_RAMP_RATE_4MV_PER_US (1 << RK808_RAMP_RATE_OFFSET)
	40	#define RK808_RAMP_RATE_6MV_PER_US (2 << RK808_RAMP_RATE_OFFSET)
	41	#define RK808_RAMP_RATE_10MV_PER_US (3 << RK808_RAMP_RATE_OFFSET)
	42
bad47ad2 CZ	43	#define RK808_DVS2_POL BIT(2)
	44	#define RK808_DVS1_POL BIT(1)
	45
251ce318 CZ	46	/* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */
	47	#define RK808_SLP_REG_OFFSET 1
	48
bad47ad2 CZ	49	/* Offset from XXX_ON_VSEL to XXX_DVS_VSEL */
	50	#define RK808_DVS_REG_OFFSET 2
	51
251ce318 CZ	52	/* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */
	53	#define RK808_SLP_SET_OFF_REG_OFFSET 2
	54
bad47ad2 CZ	55	/* max steps for increase voltage of Buck1/2, equal 100mv*/
	56	#define MAX_STEPS_ONE_TIME 8
	57
9e9daa0a WE	58	#define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \
	59	_vmask, _ereg, _emask, _etime) \
	60	[_id] = { \
	61	.name = (_match), \
	62	.supply_name = (_supply), \
	63	.of_match = of_match_ptr(_match), \
	64	.regulators_node = of_match_ptr("regulators"), \
	65	.type = REGULATOR_VOLTAGE, \
	66	.id = (_id), \
	67	.n_voltages = (((_max) - (_min)) / (_step) + 1), \
	68	.owner = THIS_MODULE, \
	69	.min_uV = (_min) * 1000, \
	70	.uV_step = (_step) * 1000, \
	71	.vsel_reg = (_vreg), \
	72	.vsel_mask = (_vmask), \
	73	.enable_reg = (_ereg), \
	74	.enable_mask = (_emask), \
	75	.enable_time = (_etime), \
	76	.ops = &rk808_reg_ops, \
	77	}
	78
	79	#define RK8XX_DESC_SWITCH(_id, _match, _supply, _ereg, _emask) \
	80	[_id] = { \
	81	.name = (_match), \
	82	.supply_name = (_supply), \
	83	.of_match = of_match_ptr(_match), \
	84	.regulators_node = of_match_ptr("regulators"), \
	85	.type = REGULATOR_VOLTAGE, \
	86	.id = (_id), \
	87	.enable_reg = (_ereg), \
	88	.enable_mask = (_emask), \
	89	.owner = THIS_MODULE, \
	90	.ops = &rk808_switch_ops \
	91	}
	92
	93
bad47ad2 CZ	94	struct rk808_regulator_data {
	95	struct gpio_desc *dvs_gpio[2];
	96	};
	97
8af25227 DA	98	static const int rk808_buck_config_regs[] = {
	99	RK808_BUCK1_CONFIG_REG,
	100	RK808_BUCK2_CONFIG_REG,
	101	RK808_BUCK3_CONFIG_REG,
	102	RK808_BUCK4_CONFIG_REG,
	103	};
	104
2cd64ae3 CZ	105	static const struct regulator_linear_range rk808_ldo3_voltage_ranges[] = {
	106	REGULATOR_LINEAR_RANGE(800000, 0, 13, 100000),
	107	REGULATOR_LINEAR_RANGE(2500000, 15, 15, 0),
	108	};
	109
bad47ad2 CZ	110	static int rk808_buck1_2_get_voltage_sel_regmap(struct regulator_dev *rdev)
	111	{
	112	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
	113	int id = rdev->desc->id - RK808_ID_DCDC1;
	114	struct gpio_desc *gpio = pdata->dvs_gpio[id];
	115	unsigned int val;
	116	int ret;
	117
a13eaf02	118	if (!gpio \|\| gpiod_get_value(gpio) == 0)
bad47ad2 CZ	119	return regulator_get_voltage_sel_regmap(rdev);
	120
	121	ret = regmap_read(rdev->regmap,
	122	rdev->desc->vsel_reg + RK808_DVS_REG_OFFSET,
	123	&val);
	124	if (ret != 0)
	125	return ret;
	126
	127	val &= rdev->desc->vsel_mask;
	128	val >>= ffs(rdev->desc->vsel_mask) - 1;
	129
	130	return val;
	131	}
	132
	133	static int rk808_buck1_2_i2c_set_voltage_sel(struct regulator_dev *rdev,
	134	unsigned sel)
	135	{
	136	int ret, delta_sel;
	137	unsigned int old_sel, tmp, val, mask = rdev->desc->vsel_mask;
	138
	139	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
	140	if (ret != 0)
	141	return ret;
	142
	143	tmp = val & ~mask;
	144	old_sel = val & mask;
	145	old_sel >>= ffs(mask) - 1;
	146	delta_sel = sel - old_sel;
	147
	148	/*
	149	* If directly modify the register to change the voltage, we will face
	150	* the risk of overshoot. Put it into a multi-step, can effectively
	151	* avoid this problem, a step is 100mv here.
	152	*/
	153	while (delta_sel > MAX_STEPS_ONE_TIME) {
	154	old_sel += MAX_STEPS_ONE_TIME;
	155	val = old_sel << (ffs(mask) - 1);
	156	val \|= tmp;
	157
	158	/*
	159	* i2c is 400kHz (2.5us per bit) and we must transmit _at least_
	160	* 3 bytes (24 bits) plus start and stop so 26 bits. So we've
	161	* got more than 65 us between each voltage change and thus
	162	* won't ramp faster than ~1500 uV / us.
	163	*/
	164	ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
	165	delta_sel = sel - old_sel;
	166	}
	167
	168	sel <<= ffs(mask) - 1;
	169	val = tmp \| sel;
	170	ret = regmap_write(rdev->regmap, rdev->desc->vsel_reg, val);
	171
	172	/*
	173	* When we change the voltage register directly, the ramp rate is about
	174	* 100000uv/us, wait 1us to make sure the target voltage to be stable,
	175	* so we needn't wait extra time after that.
	176	*/
	177	udelay(1);
	178
	179	return ret;
	180	}
	181
	182	static int rk808_buck1_2_set_voltage_sel(struct regulator_dev *rdev,
183	unsigned sel)
184	{
185	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
186	int id = rdev->desc->id - RK808_ID_DCDC1;
187	struct gpio_desc *gpio = pdata->dvs_gpio[id];
188	unsigned int reg = rdev->desc->vsel_reg;
189	unsigned old_sel;
190	int ret, gpio_level;
191
a13eaf02	192	if (!gpio)
bad47ad2 CZ	193	return rk808_buck1_2_i2c_set_voltage_sel(rdev, sel);
	194
	195	gpio_level = gpiod_get_value(gpio);
	196	if (gpio_level == 0) {
	197	reg += RK808_DVS_REG_OFFSET;
	198	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &old_sel);
	199	} else {
	200	ret = regmap_read(rdev->regmap,
	201	reg + RK808_DVS_REG_OFFSET,
	202	&old_sel);
	203	}
	204
	205	if (ret != 0)
	206	return ret;
	207
	208	sel <<= ffs(rdev->desc->vsel_mask) - 1;
	209	sel \|= old_sel & ~rdev->desc->vsel_mask;
	210
	211	ret = regmap_write(rdev->regmap, reg, sel);
	212	if (ret)
	213	return ret;
	214
	215	gpiod_set_value(gpio, !gpio_level);
	216
	217	return ret;
	218	}
	219
	220	static int rk808_buck1_2_set_voltage_time_sel(struct regulator_dev *rdev,
	221	unsigned int old_selector,
	222	unsigned int new_selector)
	223	{
	224	struct rk808_regulator_data *pdata = rdev_get_drvdata(rdev);
	225	int id = rdev->desc->id - RK808_ID_DCDC1;
	226	struct gpio_desc *gpio = pdata->dvs_gpio[id];
	227
	228	/* if there is no dvs1/2 pin, we don't need wait extra time here. */
a13eaf02	229	if (!gpio)
bad47ad2 CZ	230	return 0;
	231
	232	return regulator_set_voltage_time_sel(rdev, old_selector, new_selector);
	233	}
	234
8af25227 DA	235	static int rk808_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
	236	{
	237	unsigned int ramp_value = RK808_RAMP_RATE_10MV_PER_US;
	238	unsigned int reg = rk808_buck_config_regs[rdev->desc->id -
	239	RK808_ID_DCDC1];
	240
	241	switch (ramp_delay) {
	242	case 1 ... 2000:
	243	ramp_value = RK808_RAMP_RATE_2MV_PER_US;
	244	break;
	245	case 2001 ... 4000:
	246	ramp_value = RK808_RAMP_RATE_4MV_PER_US;
	247	break;
	248	case 4001 ... 6000:
	249	ramp_value = RK808_RAMP_RATE_6MV_PER_US;
	250	break;
	251	case 6001 ... 10000:
	252	break;
	253	default:
	254	pr_warn("%s ramp_delay: %d not supported, setting 10000\n",
	255	rdev->desc->name, ramp_delay);
	256	}
	257
	258	return regmap_update_bits(rdev->regmap, reg,
	259	RK808_RAMP_RATE_MASK, ramp_value);
	260	}
	261
5cb2f03c	262	static int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
afcd666d WE	263	{
	264	unsigned int reg;
	265	int sel = regulator_map_voltage_linear(rdev, uv, uv);
	266
	267	if (sel < 0)
	268	return -EINVAL;
	269
	270	reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
	271
	272	return regmap_update_bits(rdev->regmap, reg,
	273	rdev->desc->vsel_mask,
	274	sel);
	275	}
	276
129d7cf9 WE	277	static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
	278	{
	279	unsigned int reg;
	280	int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
	281
	282	if (sel < 0)
	283	return -EINVAL;
	284
	285	reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
	286
	287	return regmap_update_bits(rdev->regmap, reg,
	288	rdev->desc->vsel_mask,
	289	sel);
	290	}
	291
5cb2f03c	292	static int rk808_set_suspend_enable(struct regulator_dev *rdev)
251ce318 CZ	293	{
	294	unsigned int reg;
	295
	296	reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
	297
	298	return regmap_update_bits(rdev->regmap, reg,
	299	rdev->desc->enable_mask,
	300	0);
	301	}
	302
5cb2f03c	303	static int rk808_set_suspend_disable(struct regulator_dev *rdev)
251ce318 CZ	304	{
	305	unsigned int reg;
	306
	307	reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
	308
	309	return regmap_update_bits(rdev->regmap, reg,
	310	rdev->desc->enable_mask,
	311	rdev->desc->enable_mask);
	312	}
	313
8af25227	314	static struct regulator_ops rk808_buck1_2_ops = {
afcd666d WE	315	.list_voltage = regulator_list_voltage_linear,
afcd666d WE	316	.map_voltage = regulator_map_voltage_linear,
bad47ad2 CZ	317	.get_voltage_sel = rk808_buck1_2_get_voltage_sel_regmap,
	318	.set_voltage_sel = rk808_buck1_2_set_voltage_sel,
	319	.set_voltage_time_sel = rk808_buck1_2_set_voltage_time_sel,
8af25227 DA	320	.enable = regulator_enable_regmap,
	321	.disable = regulator_disable_regmap,
	322	.is_enabled = regulator_is_enabled_regmap,
	323	.set_ramp_delay = rk808_set_ramp_delay,
251ce318 CZ	324	.set_suspend_voltage = rk808_set_suspend_voltage,
	325	.set_suspend_enable = rk808_set_suspend_enable,
	326	.set_suspend_disable = rk808_set_suspend_disable,
8af25227 DA	327	};
8af25227 DA	328
2cd64ae3	329	static struct regulator_ops rk808_reg_ops = {
afcd666d WE	330	.list_voltage = regulator_list_voltage_linear,
	331	.map_voltage = regulator_map_voltage_linear,
	332	.get_voltage_sel = regulator_get_voltage_sel_regmap,
	333	.set_voltage_sel = regulator_set_voltage_sel_regmap,
	334	.enable = regulator_enable_regmap,
	335	.disable = regulator_disable_regmap,
	336	.is_enabled = regulator_is_enabled_regmap,
	337	.set_suspend_voltage = rk808_set_suspend_voltage,
	338	.set_suspend_enable = rk808_set_suspend_enable,
	339	.set_suspend_disable = rk808_set_suspend_disable,
	340	};
	341
129d7cf9 WE	342	static struct regulator_ops rk808_reg_ops_ranges = {
	343	.list_voltage = regulator_list_voltage_linear_range,
	344	.map_voltage = regulator_map_voltage_linear_range,
	345	.get_voltage_sel = regulator_get_voltage_sel_regmap,
	346	.set_voltage_sel = regulator_set_voltage_sel_regmap,
	347	.enable = regulator_enable_regmap,
	348	.disable = regulator_disable_regmap,
	349	.is_enabled = regulator_is_enabled_regmap,
	350	.set_suspend_voltage = rk808_set_suspend_voltage_range,
	351	.set_suspend_enable = rk808_set_suspend_enable,
	352	.set_suspend_disable = rk808_set_suspend_disable,
	353	};
	354
2cd64ae3	355	static struct regulator_ops rk808_switch_ops = {
251ce318 CZ	356	.enable = regulator_enable_regmap,
	357	.disable = regulator_disable_regmap,
	358	.is_enabled = regulator_is_enabled_regmap,
	359	.set_suspend_enable = rk808_set_suspend_enable,
	360	.set_suspend_disable = rk808_set_suspend_disable,
2cd64ae3 CZ	361	};
	362
	363	static const struct regulator_desc rk808_reg[] = {
	364	{
	365	.name = "DCDC_REG1",
b8074eba	366	.supply_name = "vcc1",
9e9daa0a WE	367	.of_match = of_match_ptr("DCDC_REG1"),
9e9daa0a WE	368	.regulators_node = of_match_ptr("regulators"),
2cd64ae3	369	.id = RK808_ID_DCDC1,
8af25227	370	.ops = &rk808_buck1_2_ops,
2cd64ae3	371	.type = REGULATOR_VOLTAGE,
afcd666d WE	372	.min_uV = 712500,
afcd666d WE	373	.uV_step = 12500,
2cd64ae3	374	.n_voltages = 64,
2cd64ae3 CZ	375	.vsel_reg = RK808_BUCK1_ON_VSEL_REG,
	376	.vsel_mask = RK808_BUCK_VSEL_MASK,
	377	.enable_reg = RK808_DCDC_EN_REG,
	378	.enable_mask = BIT(0),
	379	.owner = THIS_MODULE,
	380	}, {
	381	.name = "DCDC_REG2",
b8074eba	382	.supply_name = "vcc2",
9e9daa0a WE	383	.of_match = of_match_ptr("DCDC_REG2"),
9e9daa0a WE	384	.regulators_node = of_match_ptr("regulators"),
2cd64ae3	385	.id = RK808_ID_DCDC2,
8af25227	386	.ops = &rk808_buck1_2_ops,
2cd64ae3	387	.type = REGULATOR_VOLTAGE,
afcd666d WE	388	.min_uV = 712500,
afcd666d WE	389	.uV_step = 12500,
2cd64ae3	390	.n_voltages = 64,
2cd64ae3 CZ	391	.vsel_reg = RK808_BUCK2_ON_VSEL_REG,
	392	.vsel_mask = RK808_BUCK_VSEL_MASK,
	393	.enable_reg = RK808_DCDC_EN_REG,
	394	.enable_mask = BIT(1),
	395	.owner = THIS_MODULE,
	396	}, {
	397	.name = "DCDC_REG3",
b8074eba	398	.supply_name = "vcc3",
9e9daa0a WE	399	.of_match = of_match_ptr("DCDC_REG3"),
9e9daa0a WE	400	.regulators_node = of_match_ptr("regulators"),
2cd64ae3 CZ	401	.id = RK808_ID_DCDC3,
	402	.ops = &rk808_switch_ops,
	403	.type = REGULATOR_VOLTAGE,
	404	.n_voltages = 1,
	405	.enable_reg = RK808_DCDC_EN_REG,
	406	.enable_mask = BIT(2),
	407	.owner = THIS_MODULE,
9e9daa0a WE	408	},
	409	RK8XX_DESC(RK808_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3300, 100,
	410	RK808_BUCK4_ON_VSEL_REG, RK808_BUCK4_VSEL_MASK,
	411	RK808_DCDC_EN_REG, BIT(3), 0),
	412	RK8XX_DESC(RK808_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100,
	413	RK808_LDO1_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
	414	BIT(0), 400),
	415	RK8XX_DESC(RK808_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100,
	416	RK808_LDO2_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
	417	BIT(1), 400),
	418	{
2cd64ae3	419	.name = "LDO_REG3",
b8074eba	420	.supply_name = "vcc7",
9e9daa0a WE	421	.of_match = of_match_ptr("LDO_REG3"),
9e9daa0a WE	422	.regulators_node = of_match_ptr("regulators"),
2cd64ae3	423	.id = RK808_ID_LDO3,
129d7cf9	424	.ops = &rk808_reg_ops_ranges,
2cd64ae3 CZ	425	.type = REGULATOR_VOLTAGE,
	426	.n_voltages = 16,
	427	.linear_ranges = rk808_ldo3_voltage_ranges,
	428	.n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges),
	429	.vsel_reg = RK808_LDO3_ON_VSEL_REG,
	430	.vsel_mask = RK808_BUCK4_VSEL_MASK,
	431	.enable_reg = RK808_LDO_EN_REG,
	432	.enable_mask = BIT(2),
28249b0c	433	.enable_time = 400,
2cd64ae3	434	.owner = THIS_MODULE,
2cd64ae3	435	},
9e9daa0a WE	436	RK8XX_DESC(RK808_ID_LDO4, "LDO_REG4", "vcc9", 1800, 3400, 100,
	437	RK808_LDO4_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
	438	BIT(3), 400),
	439	RK8XX_DESC(RK808_ID_LDO5, "LDO_REG5", "vcc9", 1800, 3400, 100,
	440	RK808_LDO5_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
	441	BIT(4), 400),
	442	RK8XX_DESC(RK808_ID_LDO6, "LDO_REG6", "vcc10", 800, 2500, 100,
	443	RK808_LDO6_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
	444	BIT(5), 400),
	445	RK8XX_DESC(RK808_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100,
	446	RK808_LDO7_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
	447	BIT(6), 400),
	448	RK8XX_DESC(RK808_ID_LDO8, "LDO_REG8", "vcc11", 1800, 3400, 100,
	449	RK808_LDO8_ON_VSEL_REG, RK808_LDO_VSEL_MASK, RK808_LDO_EN_REG,
	450	BIT(7), 400),
	451	RK8XX_DESC_SWITCH(RK808_ID_SWITCH1, "SWITCH_REG1", "vcc8",
	452	RK808_DCDC_EN_REG, BIT(5)),
	453	RK8XX_DESC_SWITCH(RK808_ID_SWITCH2, "SWITCH_REG2", "vcc12",
	454	RK808_DCDC_EN_REG, BIT(6)),
2cd64ae3 CZ	455	};
2cd64ae3 CZ	456
bad47ad2 CZ	457	static int rk808_regulator_dt_parse_pdata(struct device *dev,
	458	struct device *client_dev,
	459	struct regmap *map,
	460	struct rk808_regulator_data *pdata)
	461	{
	462	struct device_node *np;
9e9daa0a	463	int tmp, ret = 0, i;
bad47ad2 CZ	464
	465	np = of_get_child_by_name(client_dev->of_node, "regulators");
	466	if (!np)
	467	return -ENXIO;
	468
bad47ad2	469	for (i = 0; i < ARRAY_SIZE(pdata->dvs_gpio); i++) {
a13eaf02 UKK	470	pdata->dvs_gpio[i] =
	471	devm_gpiod_get_index_optional(client_dev, "dvs", i,
	472	GPIOD_OUT_LOW);
bad47ad2	473	if (IS_ERR(pdata->dvs_gpio[i])) {
a13eaf02 UKK	474	ret = PTR_ERR(pdata->dvs_gpio[i]);
	475	dev_err(dev, "failed to get dvs%d gpio (%d)\n", i, ret);
	476	goto dt_parse_end;
	477	}
	478
	479	if (!pdata->dvs_gpio[i]) {
bad47ad2 CZ	480	dev_warn(dev, "there is no dvs%d gpio\n", i);
	481	continue;
	482	}
	483
bad47ad2 CZ	484	tmp = i ? RK808_DVS2_POL : RK808_DVS1_POL;
	485	ret = regmap_update_bits(map, RK808_IO_POL_REG, tmp,
	486	gpiod_is_active_low(pdata->dvs_gpio[i]) ?
	487	0 : tmp);
	488	}
	489
	490	dt_parse_end:
	491	of_node_put(np);
	492	return ret;
	493	}
	494
2cd64ae3 CZ	495	static int rk808_regulator_probe(struct platform_device *pdev)
	496	{
	497	struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
d76c333e	498	struct i2c_client *client = rk808->i2c;
462004f1	499	struct regulator_config config = {};
2cd64ae3	500	struct regulator_dev *rk808_rdev;
bad47ad2	501	struct rk808_regulator_data *pdata;
571a4010	502	int ret, i;
2cd64ae3	503
bad47ad2 CZ	504	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
	505	if (!pdata)
	506	return -ENOMEM;
2cd64ae3	507
bad47ad2 CZ	508	ret = rk808_regulator_dt_parse_pdata(&pdev->dev, &client->dev,
bad47ad2 CZ	509	rk808->regmap, pdata);
571a4010	510	if (ret < 0)
2cd64ae3 CZ	511	return ret;
2cd64ae3 CZ	512
bad47ad2 CZ	513	platform_set_drvdata(pdev, pdata);
bad47ad2 CZ	514
9e9daa0a WE	515	config.dev = &client->dev;
	516	config.driver_data = pdata;
	517	config.regmap = rk808->regmap;
	518
2cd64ae3 CZ	519	/* Instantiate the regulators */
2cd64ae3 CZ	520	for (i = 0; i < RK808_NUM_REGULATORS; i++) {
2cd64ae3 CZ	521	rk808_rdev = devm_regulator_register(&pdev->dev,
	522	&rk808_reg[i], &config);
	523	if (IS_ERR(rk808_rdev)) {
d76c333e	524	dev_err(&client->dev,
2cd64ae3 CZ	525	"failed to register %d regulator\n", i);
	526	return PTR_ERR(rk808_rdev);
	527	}
2cd64ae3	528	}
571a4010	529
2cd64ae3 CZ	530	return 0;
	531	}
	532
	533	static struct platform_driver rk808_regulator_driver = {
	534	.probe = rk808_regulator_probe,
	535	.driver = {
	536	.name = "rk808-regulator",
bad47ad2	537	.owner = THIS_MODULE,
2cd64ae3 CZ	538	},
	539	};
	540
	541	module_platform_driver(rk808_regulator_driver);
	542
	543	MODULE_DESCRIPTION("regulator driver for the rk808 series PMICs");
	544	MODULE_AUTHOR("Chris Zhong<zyw@rock-chips.com>");
571a4010	545	MODULE_AUTHOR("Zhang Qing<zhangqing@rock-chips.com>");
2cd64ae3 CZ	546	MODULE_LICENSE("GPL");
2cd64ae3 CZ	547	MODULE_ALIAS("platform:rk808-regulator");