Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* $Id: aha1542.c,v 1.1 1992/07/24 06:27:38 root Exp root $ |
2 | * linux/kernel/aha1542.c | |
3 | * | |
4 | * Copyright (C) 1992 Tommy Thorn | |
5 | * Copyright (C) 1993, 1994, 1995 Eric Youngdale | |
6 | * | |
7 | * Modified by Eric Youngdale | |
8 | * Use request_irq and request_dma to help prevent unexpected conflicts | |
9 | * Set up on-board DMA controller, such that we do not have to | |
10 | * have the bios enabled to use the aha1542. | |
11 | * Modified by David Gentzel | |
12 | * Don't call request_dma if dma mask is 0 (for BusLogic BT-445S VL-Bus | |
13 | * controller). | |
14 | * Modified by Matti Aarnio | |
15 | * Accept parameters from LILO cmd-line. -- 1-Oct-94 | |
16 | * Modified by Mike McLagan <mike.mclagan@linux.org> | |
17 | * Recognise extended mode on AHA1542CP, different bit than 1542CF | |
18 | * 1-Jan-97 | |
19 | * Modified by Bjorn L. Thordarson and Einar Thor Einarsson | |
20 | * Recognize that DMA0 is valid DMA channel -- 13-Jul-98 | |
21 | * Modified by Chris Faulhaber <jedgar@fxp.org> | |
22 | * Added module command-line options | |
23 | * 19-Jul-99 | |
726a6459 | 24 | * Modified by Adam Fritzler |
a88dc06c | 25 | * Added proper detection of the AHA-1640 (MCA, now deleted) |
1da177e4 LT |
26 | */ |
27 | ||
1da177e4 LT |
28 | #include <linux/module.h> |
29 | #include <linux/interrupt.h> | |
30 | #include <linux/kernel.h> | |
31 | #include <linux/types.h> | |
32 | #include <linux/string.h> | |
33 | #include <linux/ioport.h> | |
34 | #include <linux/delay.h> | |
35 | #include <linux/proc_fs.h> | |
36 | #include <linux/init.h> | |
37 | #include <linux/spinlock.h> | |
643a7c43 OZ |
38 | #include <linux/isa.h> |
39 | #include <linux/pnp.h> | |
1da177e4 | 40 | #include <linux/blkdev.h> |
5a0e3ad6 | 41 | #include <linux/slab.h> |
1da177e4 LT |
42 | |
43 | #include <asm/dma.h> | |
1da177e4 LT |
44 | #include <asm/io.h> |
45 | ||
46 | #include "scsi.h" | |
47 | #include <scsi/scsi_host.h> | |
48 | #include "aha1542.h" | |
6ac7d115 | 49 | #include <linux/stat.h> |
1da177e4 LT |
50 | |
51 | #ifdef DEBUG | |
52 | #define DEB(x) x | |
53 | #else | |
54 | #define DEB(x) | |
55 | #endif | |
56 | ||
57 | /* | |
58 | static const char RCSid[] = "$Header: /usr/src/linux/kernel/blk_drv/scsi/RCS/aha1542.c,v 1.1 1992/07/24 06:27:38 root Exp root $"; | |
59 | */ | |
60 | ||
61 | /* The adaptec can be configured for quite a number of addresses, but | |
62 | I generally do not want the card poking around at random. We allow | |
63 | two addresses - this allows people to use the Adaptec with a Midi | |
64 | card, which also used 0x330 -- can be overridden with LILO! */ | |
65 | ||
66 | #define MAXBOARDS 4 /* Increase this and the sizes of the | |
67 | arrays below, if you need more.. */ | |
68 | ||
a88dc06c | 69 | /* Boards 3,4 slots are reserved for ISAPnP scans */ |
1da177e4 | 70 | |
643a7c43 | 71 | static unsigned int bases[MAXBOARDS] = {0x330, 0x334, 0, 0}; |
1da177e4 LT |
72 | |
73 | /* set by aha1542_setup according to the command line; they also may | |
74 | be marked __initdata, but require zero initializers then */ | |
75 | ||
76 | static int setup_called[MAXBOARDS]; | |
77 | static int setup_buson[MAXBOARDS]; | |
78 | static int setup_busoff[MAXBOARDS]; | |
643a7c43 | 79 | static int setup_dmaspeed[MAXBOARDS] = { -1, -1, -1, -1 }; |
1da177e4 LT |
80 | |
81 | /* | |
82 | * LILO/Module params: aha1542=<PORTBASE>[,<BUSON>,<BUSOFF>[,<DMASPEED>]] | |
83 | * | |
84 | * Where: <PORTBASE> is any of the valid AHA addresses: | |
85 | * 0x130, 0x134, 0x230, 0x234, 0x330, 0x334 | |
86 | * <BUSON> is the time (in microsecs) that AHA spends on the AT-bus | |
87 | * when transferring data. 1542A power-on default is 11us, | |
88 | * valid values are in range: 2..15 (decimal) | |
89 | * <BUSOFF> is the time that AHA spends OFF THE BUS after while | |
90 | * it is transferring data (not to monopolize the bus). | |
91 | * Power-on default is 4us, valid range: 1..64 microseconds. | |
92 | * <DMASPEED> Default is jumper selected (1542A: on the J1), | |
93 | * but experimenter can alter it with this. | |
94 | * Valid values: 5, 6, 7, 8, 10 (MB/s) | |
95 | * Factory default is 5 MB/s. | |
96 | */ | |
97 | ||
98 | #if defined(MODULE) | |
90ab5ee9 | 99 | static bool isapnp = 0; |
1da177e4 LT |
100 | static int aha1542[] = {0x330, 11, 4, -1}; |
101 | module_param_array(aha1542, int, NULL, 0); | |
102 | module_param(isapnp, bool, 0); | |
1da177e4 LT |
103 | #else |
104 | static int isapnp = 1; | |
105 | #endif | |
106 | ||
107 | #define BIOS_TRANSLATION_1632 0 /* Used by some old 1542A boards */ | |
108 | #define BIOS_TRANSLATION_6432 1 /* Default case these days */ | |
109 | #define BIOS_TRANSLATION_25563 2 /* Big disk case */ | |
110 | ||
111 | struct aha1542_hostdata { | |
112 | /* This will effectively start both of them at the first mailbox */ | |
113 | int bios_translation; /* Mapping bios uses - for compatibility */ | |
114 | int aha1542_last_mbi_used; | |
115 | int aha1542_last_mbo_used; | |
116 | Scsi_Cmnd *SCint[AHA1542_MAILBOXES]; | |
117 | struct mailbox mb[2 * AHA1542_MAILBOXES]; | |
118 | struct ccb ccb[AHA1542_MAILBOXES]; | |
119 | }; | |
120 | ||
1da177e4 LT |
121 | static DEFINE_SPINLOCK(aha1542_lock); |
122 | ||
f1bbef63 OZ |
123 | static inline void aha1542_intr_reset(u16 base) |
124 | { | |
125 | outb(IRST, CONTROL(base)); | |
126 | } | |
1da177e4 | 127 | |
2093bfa1 OZ |
128 | static inline bool wait_mask(u16 port, u8 mask, u8 allof, u8 noneof, int timeout) |
129 | { | |
130 | bool delayed = true; | |
131 | ||
132 | if (timeout == 0) { | |
133 | timeout = 3000000; | |
134 | delayed = false; | |
135 | } | |
136 | ||
137 | while (1) { | |
138 | u8 bits = inb(port) & mask; | |
139 | if ((bits & allof) == allof && ((bits & noneof) == 0)) | |
140 | break; | |
141 | if (delayed) | |
142 | mdelay(1); | |
143 | if (--timeout == 0) | |
144 | return false; | |
145 | } | |
146 | ||
147 | return true; | |
148 | } | |
1da177e4 | 149 | |
1da177e4 LT |
150 | /* This is a bit complicated, but we need to make sure that an interrupt |
151 | routine does not send something out while we are in the middle of this. | |
152 | Fortunately, it is only at boot time that multi-byte messages | |
153 | are ever sent. */ | |
0c2b6481 | 154 | static int aha1542_outb(unsigned int base, u8 cmd) |
1da177e4 | 155 | { |
0c2b6481 OZ |
156 | unsigned long flags; |
157 | ||
158 | while (1) { | |
159 | if (!wait_mask(STATUS(base), CDF, 0, CDF, 0)) { | |
160 | printk(KERN_ERR "aha1542_outb failed"); | |
161 | return 1; | |
1da177e4 | 162 | } |
1da177e4 | 163 | spin_lock_irqsave(&aha1542_lock, flags); |
0c2b6481 OZ |
164 | if (inb(STATUS(base)) & CDF) { |
165 | spin_unlock_irqrestore(&aha1542_lock, flags); | |
166 | continue; | |
1da177e4 | 167 | } |
0c2b6481 | 168 | outb(cmd, DATA(base)); |
1da177e4 | 169 | spin_unlock_irqrestore(&aha1542_lock, flags); |
0c2b6481 | 170 | return 0; |
1da177e4 | 171 | } |
0c2b6481 OZ |
172 | } |
173 | ||
174 | static int aha1542_out(unsigned int base, u8 *cmdp, int len) | |
175 | { | |
176 | unsigned long flags; | |
177 | ||
178 | spin_lock_irqsave(&aha1542_lock, flags); | |
179 | while (len--) { | |
180 | if (!wait_mask(STATUS(base), CDF, 0, CDF, 0)) { | |
181 | spin_unlock_irqrestore(&aha1542_lock, flags); | |
182 | printk(KERN_ERR "aha1542_out failed(%d): ", len + 1); | |
183 | return 1; | |
184 | } | |
185 | outb(*cmdp++, DATA(base)); | |
186 | } | |
187 | spin_unlock_irqrestore(&aha1542_lock, flags); | |
188 | ||
1da177e4 | 189 | return 0; |
1da177e4 LT |
190 | } |
191 | ||
192 | /* Only used at boot time, so we do not need to worry about latency as much | |
193 | here */ | |
194 | ||
f8846be3 | 195 | static int aha1542_in(unsigned int base, u8 *cmdp, int len, int timeout) |
1da177e4 LT |
196 | { |
197 | unsigned long flags; | |
198 | ||
199 | spin_lock_irqsave(&aha1542_lock, flags); | |
200 | while (len--) { | |
a13b3722 OZ |
201 | if (!wait_mask(STATUS(base), DF, DF, 0, timeout)) { |
202 | spin_unlock_irqrestore(&aha1542_lock, flags); | |
203 | if (timeout == 0) | |
204 | printk(KERN_ERR "aha1542_in failed(%d): ", len + 1); | |
205 | return 1; | |
206 | } | |
1da177e4 LT |
207 | *cmdp++ = inb(DATA(base)); |
208 | } | |
209 | spin_unlock_irqrestore(&aha1542_lock, flags); | |
210 | return 0; | |
1da177e4 LT |
211 | } |
212 | ||
213 | static int makecode(unsigned hosterr, unsigned scsierr) | |
214 | { | |
215 | switch (hosterr) { | |
216 | case 0x0: | |
217 | case 0xa: /* Linked command complete without error and linked normally */ | |
218 | case 0xb: /* Linked command complete without error, interrupt generated */ | |
219 | hosterr = 0; | |
220 | break; | |
221 | ||
222 | case 0x11: /* Selection time out-The initiator selection or target | |
223 | reselection was not complete within the SCSI Time out period */ | |
224 | hosterr = DID_TIME_OUT; | |
225 | break; | |
226 | ||
227 | case 0x12: /* Data overrun/underrun-The target attempted to transfer more data | |
228 | than was allocated by the Data Length field or the sum of the | |
229 | Scatter / Gather Data Length fields. */ | |
230 | ||
231 | case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */ | |
232 | ||
233 | case 0x15: /* MBO command was not 00, 01 or 02-The first byte of the CB was | |
234 | invalid. This usually indicates a software failure. */ | |
235 | ||
236 | case 0x16: /* Invalid CCB Operation Code-The first byte of the CCB was invalid. | |
237 | This usually indicates a software failure. */ | |
238 | ||
239 | case 0x17: /* Linked CCB does not have the same LUN-A subsequent CCB of a set | |
240 | of linked CCB's does not specify the same logical unit number as | |
241 | the first. */ | |
242 | case 0x18: /* Invalid Target Direction received from Host-The direction of a | |
243 | Target Mode CCB was invalid. */ | |
244 | ||
245 | case 0x19: /* Duplicate CCB Received in Target Mode-More than once CCB was | |
246 | received to service data transfer between the same target LUN | |
247 | and initiator SCSI ID in the same direction. */ | |
248 | ||
249 | case 0x1a: /* Invalid CCB or Segment List Parameter-A segment list with a zero | |
250 | length segment or invalid segment list boundaries was received. | |
251 | A CCB parameter was invalid. */ | |
252 | DEB(printk("Aha1542: %x %x\n", hosterr, scsierr)); | |
253 | hosterr = DID_ERROR; /* Couldn't find any better */ | |
254 | break; | |
255 | ||
256 | case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus | |
257 | phase sequence was requested by the target. The host adapter | |
258 | will generate a SCSI Reset Condition, notifying the host with | |
259 | a SCRD interrupt */ | |
260 | hosterr = DID_RESET; | |
261 | break; | |
262 | default: | |
263 | printk(KERN_ERR "aha1542: makecode: unknown hoststatus %x\n", hosterr); | |
264 | break; | |
265 | } | |
266 | return scsierr | (hosterr << 16); | |
267 | } | |
268 | ||
643a7c43 | 269 | static int aha1542_test_port(int bse, struct Scsi_Host *shpnt) |
1da177e4 | 270 | { |
cb5b570c OZ |
271 | u8 inquiry_result[4]; |
272 | u8 *cmdp; | |
1da177e4 | 273 | int len; |
1da177e4 LT |
274 | |
275 | /* Quick and dirty test for presence of the card. */ | |
276 | if (inb(STATUS(bse)) == 0xff) | |
277 | return 0; | |
278 | ||
279 | /* Reset the adapter. I ought to make a hard reset, but it's not really necessary */ | |
280 | ||
1da177e4 LT |
281 | /* In case some other card was probing here, reset interrupts */ |
282 | aha1542_intr_reset(bse); /* reset interrupts, so they don't block */ | |
283 | ||
284 | outb(SRST | IRST /*|SCRST */ , CONTROL(bse)); | |
285 | ||
286 | mdelay(20); /* Wait a little bit for things to settle down. */ | |
287 | ||
1da177e4 | 288 | /* Expect INIT and IDLE, any of the others are bad */ |
2093bfa1 | 289 | if (!wait_mask(STATUS(bse), STATMASK, INIT | IDLE, STST | DIAGF | INVDCMD | DF | CDF, 0)) |
a13b3722 | 290 | return 0; |
1da177e4 | 291 | |
1da177e4 LT |
292 | /* Shouldn't have generated any interrupts during reset */ |
293 | if (inb(INTRFLAGS(bse)) & INTRMASK) | |
a13b3722 | 294 | return 0; |
1da177e4 | 295 | |
1da177e4 LT |
296 | /* Perform a host adapter inquiry instead so we do not need to set |
297 | up the mailboxes ahead of time */ | |
298 | ||
0c2b6481 | 299 | aha1542_outb(bse, CMD_INQUIRY); |
1da177e4 | 300 | |
1da177e4 LT |
301 | len = 4; |
302 | cmdp = &inquiry_result[0]; | |
303 | ||
304 | while (len--) { | |
2093bfa1 | 305 | if (!wait_mask(STATUS(bse), DF, DF, 0, 0)) |
a13b3722 | 306 | return 0; |
1da177e4 LT |
307 | *cmdp++ = inb(DATA(bse)); |
308 | } | |
309 | ||
1da177e4 LT |
310 | /* Reading port should reset DF */ |
311 | if (inb(STATUS(bse)) & DF) | |
a13b3722 | 312 | return 0; |
1da177e4 | 313 | |
1da177e4 | 314 | /* When HACC, command is completed, and we're though testing */ |
2093bfa1 | 315 | if (!wait_mask(INTRFLAGS(bse), HACC, HACC, 0, 0)) |
a13b3722 | 316 | return 0; |
1da177e4 | 317 | |
1da177e4 LT |
318 | /* Clear interrupts */ |
319 | outb(IRST, CONTROL(bse)); | |
320 | ||
bdebe224 | 321 | return 1; |
1da177e4 LT |
322 | } |
323 | ||
1da177e4 | 324 | /* A "high" level interrupt handler */ |
87c4d7bc | 325 | static void aha1542_intr_handle(struct Scsi_Host *shost) |
1da177e4 | 326 | { |
e98878f7 | 327 | struct aha1542_hostdata *aha1542 = shost_priv(shost); |
1da177e4 LT |
328 | void (*my_done) (Scsi_Cmnd *) = NULL; |
329 | int errstatus, mbi, mbo, mbistatus; | |
330 | int number_serviced; | |
331 | unsigned long flags; | |
332 | Scsi_Cmnd *SCtmp; | |
333 | int flag; | |
e98878f7 OZ |
334 | struct mailbox *mb = aha1542->mb; |
335 | struct ccb *ccb = aha1542->ccb; | |
1da177e4 LT |
336 | |
337 | #ifdef DEBUG | |
338 | { | |
339 | flag = inb(INTRFLAGS(shost->io_port)); | |
340 | printk(KERN_DEBUG "aha1542_intr_handle: "); | |
341 | if (!(flag & ANYINTR)) | |
342 | printk("no interrupt?"); | |
343 | if (flag & MBIF) | |
344 | printk("MBIF "); | |
345 | if (flag & MBOA) | |
346 | printk("MBOF "); | |
347 | if (flag & HACC) | |
348 | printk("HACC "); | |
349 | if (flag & SCRD) | |
350 | printk("SCRD "); | |
351 | printk("status %02x\n", inb(STATUS(shost->io_port))); | |
352 | }; | |
353 | #endif | |
354 | number_serviced = 0; | |
1da177e4 LT |
355 | |
356 | while (1 == 1) { | |
357 | flag = inb(INTRFLAGS(shost->io_port)); | |
358 | ||
359 | /* Check for unusual interrupts. If any of these happen, we should | |
360 | probably do something special, but for now just printing a message | |
361 | is sufficient. A SCSI reset detected is something that we really | |
362 | need to deal with in some way. */ | |
363 | if (flag & ~MBIF) { | |
364 | if (flag & MBOA) | |
365 | printk("MBOF "); | |
366 | if (flag & HACC) | |
367 | printk("HACC "); | |
dfd7c991 | 368 | if (flag & SCRD) |
1da177e4 | 369 | printk("SCRD "); |
1da177e4 LT |
370 | } |
371 | aha1542_intr_reset(shost->io_port); | |
372 | ||
373 | spin_lock_irqsave(&aha1542_lock, flags); | |
e98878f7 | 374 | mbi = aha1542->aha1542_last_mbi_used + 1; |
1da177e4 LT |
375 | if (mbi >= 2 * AHA1542_MAILBOXES) |
376 | mbi = AHA1542_MAILBOXES; | |
377 | ||
378 | do { | |
379 | if (mb[mbi].status != 0) | |
380 | break; | |
381 | mbi++; | |
382 | if (mbi >= 2 * AHA1542_MAILBOXES) | |
383 | mbi = AHA1542_MAILBOXES; | |
e98878f7 | 384 | } while (mbi != aha1542->aha1542_last_mbi_used); |
1da177e4 LT |
385 | |
386 | if (mb[mbi].status == 0) { | |
387 | spin_unlock_irqrestore(&aha1542_lock, flags); | |
388 | /* Hmm, no mail. Must have read it the last time around */ | |
dfd7c991 | 389 | if (!number_serviced) |
1da177e4 | 390 | printk(KERN_WARNING "aha1542.c: interrupt received, but no mail.\n"); |
1da177e4 LT |
391 | return; |
392 | }; | |
393 | ||
10be6250 | 394 | mbo = (scsi2int(mb[mbi].ccbptr) - (isa_virt_to_bus(&ccb[0]))) / sizeof(struct ccb); |
1da177e4 LT |
395 | mbistatus = mb[mbi].status; |
396 | mb[mbi].status = 0; | |
e98878f7 | 397 | aha1542->aha1542_last_mbi_used = mbi; |
1da177e4 LT |
398 | spin_unlock_irqrestore(&aha1542_lock, flags); |
399 | ||
400 | #ifdef DEBUG | |
401 | { | |
402 | if (ccb[mbo].tarstat | ccb[mbo].hastat) | |
403 | printk(KERN_DEBUG "aha1542_command: returning %x (status %d)\n", | |
404 | ccb[mbo].tarstat + ((int) ccb[mbo].hastat << 16), mb[mbi].status); | |
405 | }; | |
406 | #endif | |
407 | ||
408 | if (mbistatus == 3) | |
409 | continue; /* Aborted command not found */ | |
410 | ||
411 | #ifdef DEBUG | |
412 | printk(KERN_DEBUG "...done %d %d\n", mbo, mbi); | |
413 | #endif | |
414 | ||
e98878f7 | 415 | SCtmp = aha1542->SCint[mbo]; |
1da177e4 LT |
416 | |
417 | if (!SCtmp || !SCtmp->scsi_done) { | |
418 | printk(KERN_WARNING "aha1542_intr_handle: Unexpected interrupt\n"); | |
419 | printk(KERN_WARNING "tarstat=%x, hastat=%x idlun=%x ccb#=%d \n", ccb[mbo].tarstat, | |
420 | ccb[mbo].hastat, ccb[mbo].idlun, mbo); | |
421 | return; | |
422 | } | |
423 | my_done = SCtmp->scsi_done; | |
c9475cb0 JJ |
424 | kfree(SCtmp->host_scribble); |
425 | SCtmp->host_scribble = NULL; | |
1da177e4 LT |
426 | /* Fetch the sense data, and tuck it away, in the required slot. The |
427 | Adaptec automatically fetches it, and there is no guarantee that | |
428 | we will still have it in the cdb when we come back */ | |
429 | if (ccb[mbo].tarstat == 2) | |
430 | memcpy(SCtmp->sense_buffer, &ccb[mbo].cdb[ccb[mbo].cdblen], | |
b80ca4f7 | 431 | SCSI_SENSE_BUFFERSIZE); |
1da177e4 LT |
432 | |
433 | ||
434 | /* is there mail :-) */ | |
435 | ||
436 | /* more error checking left out here */ | |
437 | if (mbistatus != 1) | |
438 | /* This is surely wrong, but I don't know what's right */ | |
439 | errstatus = makecode(ccb[mbo].hastat, ccb[mbo].tarstat); | |
440 | else | |
441 | errstatus = 0; | |
442 | ||
443 | #ifdef DEBUG | |
444 | if (errstatus) | |
445 | printk(KERN_DEBUG "(aha1542 error:%x %x %x) ", errstatus, | |
446 | ccb[mbo].hastat, ccb[mbo].tarstat); | |
447 | #endif | |
448 | ||
449 | if (ccb[mbo].tarstat == 2) { | |
450 | #ifdef DEBUG | |
451 | int i; | |
452 | #endif | |
453 | DEB(printk("aha1542_intr_handle: sense:")); | |
454 | #ifdef DEBUG | |
455 | for (i = 0; i < 12; i++) | |
456 | printk("%02x ", ccb[mbo].cdb[ccb[mbo].cdblen + i]); | |
457 | printk("\n"); | |
458 | #endif | |
459 | /* | |
460 | DEB(printk("aha1542_intr_handle: buf:")); | |
461 | for (i = 0; i < bufflen; i++) | |
462 | printk("%02x ", ((unchar *)buff)[i]); | |
463 | printk("\n"); | |
464 | */ | |
465 | } | |
466 | DEB(if (errstatus) printk("aha1542_intr_handle: returning %6x\n", errstatus)); | |
467 | SCtmp->result = errstatus; | |
e98878f7 OZ |
468 | aha1542->SCint[mbo] = NULL; /* This effectively frees up the mailbox slot, as |
469 | far as queuecommand is concerned */ | |
1da177e4 LT |
470 | my_done(SCtmp); |
471 | number_serviced++; | |
472 | }; | |
473 | } | |
474 | ||
09a44833 OZ |
475 | /* A quick wrapper for do_aha1542_intr_handle to grab the spin lock */ |
476 | static irqreturn_t do_aha1542_intr_handle(int dummy, void *dev_id) | |
477 | { | |
478 | unsigned long flags; | |
479 | struct Scsi_Host *shost = dev_id; | |
480 | ||
481 | spin_lock_irqsave(shost->host_lock, flags); | |
482 | aha1542_intr_handle(shost); | |
483 | spin_unlock_irqrestore(shost->host_lock, flags); | |
484 | return IRQ_HANDLED; | |
485 | } | |
486 | ||
f281233d | 487 | static int aha1542_queuecommand_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *)) |
1da177e4 | 488 | { |
e98878f7 | 489 | struct aha1542_hostdata *aha1542 = shost_priv(SCpnt->device->host); |
cb5b570c OZ |
490 | u8 direction; |
491 | u8 *cmd = (u8 *) SCpnt->cmnd; | |
492 | u8 target = SCpnt->device->id; | |
493 | u8 lun = SCpnt->device->lun; | |
1da177e4 | 494 | unsigned long flags; |
fc3fdfcc | 495 | int bufflen = scsi_bufflen(SCpnt); |
1da177e4 | 496 | int mbo; |
e98878f7 OZ |
497 | struct mailbox *mb = aha1542->mb; |
498 | struct ccb *ccb = aha1542->ccb; | |
1da177e4 LT |
499 | |
500 | DEB(int i); | |
501 | ||
1da177e4 LT |
502 | DEB(if (target > 1) { |
503 | SCpnt->result = DID_TIME_OUT << 16; | |
504 | done(SCpnt); return 0; | |
505 | } | |
506 | ); | |
507 | ||
508 | if (*cmd == REQUEST_SENSE) { | |
509 | /* Don't do the command - we have the sense data already */ | |
1da177e4 LT |
510 | SCpnt->result = 0; |
511 | done(SCpnt); | |
512 | return 0; | |
513 | } | |
514 | #ifdef DEBUG | |
515 | if (*cmd == READ_10 || *cmd == WRITE_10) | |
516 | i = xscsi2int(cmd + 2); | |
517 | else if (*cmd == READ_6 || *cmd == WRITE_6) | |
518 | i = scsi2int(cmd + 2); | |
519 | else | |
520 | i = -1; | |
521 | if (done) | |
522 | printk(KERN_DEBUG "aha1542_queuecommand: dev %d cmd %02x pos %d len %d ", target, *cmd, i, bufflen); | |
523 | else | |
524 | printk(KERN_DEBUG "aha1542_command: dev %d cmd %02x pos %d len %d ", target, *cmd, i, bufflen); | |
1da177e4 LT |
525 | printk(KERN_DEBUG "aha1542_queuecommand: dumping scsi cmd:"); |
526 | for (i = 0; i < SCpnt->cmd_len; i++) | |
527 | printk("%02x ", cmd[i]); | |
528 | printk("\n"); | |
529 | if (*cmd == WRITE_10 || *cmd == WRITE_6) | |
530 | return 0; /* we are still testing, so *don't* write */ | |
531 | #endif | |
532 | /* Use the outgoing mailboxes in a round-robin fashion, because this | |
533 | is how the host adapter will scan for them */ | |
534 | ||
535 | spin_lock_irqsave(&aha1542_lock, flags); | |
e98878f7 | 536 | mbo = aha1542->aha1542_last_mbo_used + 1; |
1da177e4 LT |
537 | if (mbo >= AHA1542_MAILBOXES) |
538 | mbo = 0; | |
539 | ||
540 | do { | |
e98878f7 | 541 | if (mb[mbo].status == 0 && aha1542->SCint[mbo] == NULL) |
1da177e4 LT |
542 | break; |
543 | mbo++; | |
544 | if (mbo >= AHA1542_MAILBOXES) | |
545 | mbo = 0; | |
e98878f7 | 546 | } while (mbo != aha1542->aha1542_last_mbo_used); |
1da177e4 | 547 | |
e98878f7 | 548 | if (mb[mbo].status || aha1542->SCint[mbo]) |
1da177e4 LT |
549 | panic("Unable to find empty mailbox for aha1542.\n"); |
550 | ||
e98878f7 OZ |
551 | aha1542->SCint[mbo] = SCpnt; /* This will effectively prevent someone else from |
552 | screwing with this cdb. */ | |
1da177e4 | 553 | |
e98878f7 | 554 | aha1542->aha1542_last_mbo_used = mbo; |
1da177e4 LT |
555 | spin_unlock_irqrestore(&aha1542_lock, flags); |
556 | ||
557 | #ifdef DEBUG | |
558 | printk(KERN_DEBUG "Sending command (%d %x)...", mbo, done); | |
559 | #endif | |
560 | ||
10be6250 | 561 | any2scsi(mb[mbo].ccbptr, isa_virt_to_bus(&ccb[mbo])); /* This gets trashed for some reason */ |
1da177e4 LT |
562 | |
563 | memset(&ccb[mbo], 0, sizeof(struct ccb)); | |
564 | ||
565 | ccb[mbo].cdblen = SCpnt->cmd_len; | |
566 | ||
567 | direction = 0; | |
568 | if (*cmd == READ_10 || *cmd == READ_6) | |
569 | direction = 8; | |
570 | else if (*cmd == WRITE_10 || *cmd == WRITE_6) | |
571 | direction = 16; | |
572 | ||
573 | memcpy(ccb[mbo].cdb, cmd, ccb[mbo].cdblen); | |
574 | ||
fc3fdfcc | 575 | if (bufflen) { |
51cf2249 | 576 | struct scatterlist *sg; |
1da177e4 LT |
577 | struct chain *cptr; |
578 | #ifdef DEBUG | |
579 | unsigned char *ptr; | |
580 | #endif | |
fc3fdfcc | 581 | int i, sg_count = scsi_sg_count(SCpnt); |
1da177e4 | 582 | ccb[mbo].op = 2; /* SCSI Initiator Command w/scatter-gather */ |
fc3fdfcc BH |
583 | SCpnt->host_scribble = kmalloc(sizeof(*cptr)*sg_count, |
584 | GFP_KERNEL | GFP_DMA); | |
1da177e4 LT |
585 | cptr = (struct chain *) SCpnt->host_scribble; |
586 | if (cptr == NULL) { | |
587 | /* free the claimed mailbox slot */ | |
e98878f7 | 588 | aha1542->SCint[mbo] = NULL; |
1da177e4 LT |
589 | return SCSI_MLQUEUE_HOST_BUSY; |
590 | } | |
fc3fdfcc | 591 | scsi_for_each_sg(SCpnt, sg, sg_count, i) { |
10be6250 OZ |
592 | any2scsi(cptr[i].dataptr, isa_page_to_bus(sg_page(sg)) |
593 | + sg->offset); | |
51cf2249 | 594 | any2scsi(cptr[i].datalen, sg->length); |
1da177e4 | 595 | }; |
fc3fdfcc | 596 | any2scsi(ccb[mbo].datalen, sg_count * sizeof(struct chain)); |
10be6250 | 597 | any2scsi(ccb[mbo].dataptr, isa_virt_to_bus(cptr)); |
1da177e4 LT |
598 | #ifdef DEBUG |
599 | printk("cptr %x: ", cptr); | |
600 | ptr = (unsigned char *) cptr; | |
601 | for (i = 0; i < 18; i++) | |
602 | printk("%02x ", ptr[i]); | |
603 | #endif | |
604 | } else { | |
605 | ccb[mbo].op = 0; /* SCSI Initiator Command */ | |
606 | SCpnt->host_scribble = NULL; | |
fc3fdfcc BH |
607 | any2scsi(ccb[mbo].datalen, 0); |
608 | any2scsi(ccb[mbo].dataptr, 0); | |
1da177e4 LT |
609 | }; |
610 | ccb[mbo].idlun = (target & 7) << 5 | direction | (lun & 7); /*SCSI Target Id */ | |
611 | ccb[mbo].rsalen = 16; | |
612 | ccb[mbo].linkptr[0] = ccb[mbo].linkptr[1] = ccb[mbo].linkptr[2] = 0; | |
613 | ccb[mbo].commlinkid = 0; | |
614 | ||
615 | #ifdef DEBUG | |
616 | { | |
617 | int i; | |
618 | printk(KERN_DEBUG "aha1542_command: sending.. "); | |
619 | for (i = 0; i < sizeof(ccb[mbo]) - 10; i++) | |
cb5b570c | 620 | printk("%02x ", ((u8 *) &ccb[mbo])[i]); |
1da177e4 LT |
621 | }; |
622 | #endif | |
623 | ||
624 | if (done) { | |
f232d538 | 625 | DEB(printk("aha1542_queuecommand: now waiting for interrupt ")); |
1da177e4 LT |
626 | SCpnt->scsi_done = done; |
627 | mb[mbo].status = 1; | |
0c2b6481 | 628 | aha1542_outb(SCpnt->device->host->io_port, CMD_START_SCSI); |
1da177e4 LT |
629 | } else |
630 | printk("aha1542_queuecommand: done can't be NULL\n"); | |
631 | ||
632 | return 0; | |
633 | } | |
634 | ||
f281233d JG |
635 | static DEF_SCSI_QCMD(aha1542_queuecommand) |
636 | ||
1da177e4 LT |
637 | /* Initialize mailboxes */ |
638 | static void setup_mailboxes(int bse, struct Scsi_Host *shpnt) | |
639 | { | |
e98878f7 | 640 | struct aha1542_hostdata *aha1542 = shost_priv(shpnt); |
1da177e4 | 641 | int i; |
e98878f7 OZ |
642 | struct mailbox *mb = aha1542->mb; |
643 | struct ccb *ccb = aha1542->ccb; | |
1da177e4 | 644 | |
cb5b570c | 645 | u8 cmd[5] = { CMD_MBINIT, AHA1542_MAILBOXES, 0, 0, 0}; |
1da177e4 | 646 | |
1da177e4 LT |
647 | for (i = 0; i < AHA1542_MAILBOXES; i++) { |
648 | mb[i].status = mb[AHA1542_MAILBOXES + i].status = 0; | |
10be6250 | 649 | any2scsi(mb[i].ccbptr, isa_virt_to_bus(&ccb[i])); |
1da177e4 LT |
650 | }; |
651 | aha1542_intr_reset(bse); /* reset interrupts, so they don't block */ | |
10be6250 | 652 | any2scsi((cmd + 2), isa_virt_to_bus(mb)); |
1da177e4 | 653 | aha1542_out(bse, cmd, 5); |
2093bfa1 | 654 | if (!wait_mask(INTRFLAGS(bse), INTRMASK, HACC, 0, 0)) |
1da177e4 | 655 | printk(KERN_ERR "aha1542_detect: failed setting up mailboxes\n"); |
1da177e4 LT |
656 | aha1542_intr_reset(bse); |
657 | } | |
658 | ||
643a7c43 | 659 | static int aha1542_getconfig(int base_io, unsigned char *irq_level, unsigned char *dma_chan, unsigned char *scsi_id) |
1da177e4 | 660 | { |
cb5b570c | 661 | u8 inquiry_result[3]; |
1da177e4 LT |
662 | int i; |
663 | i = inb(STATUS(base_io)); | |
664 | if (i & DF) { | |
665 | i = inb(DATA(base_io)); | |
666 | }; | |
0c2b6481 | 667 | aha1542_outb(base_io, CMD_RETCONF); |
f8846be3 | 668 | aha1542_in(base_io, inquiry_result, 3, 0); |
2093bfa1 | 669 | if (!wait_mask(INTRFLAGS(base_io), INTRMASK, HACC, 0, 0)) |
1da177e4 | 670 | printk(KERN_ERR "aha1542_detect: query board settings\n"); |
1da177e4 LT |
671 | aha1542_intr_reset(base_io); |
672 | switch (inquiry_result[0]) { | |
673 | case 0x80: | |
674 | *dma_chan = 7; | |
675 | break; | |
676 | case 0x40: | |
677 | *dma_chan = 6; | |
678 | break; | |
679 | case 0x20: | |
680 | *dma_chan = 5; | |
681 | break; | |
682 | case 0x01: | |
683 | *dma_chan = 0; | |
684 | break; | |
685 | case 0: | |
686 | /* This means that the adapter, although Adaptec 1542 compatible, doesn't use a DMA channel. | |
687 | Currently only aware of the BusLogic BT-445S VL-Bus adapter which needs this. */ | |
688 | *dma_chan = 0xFF; | |
689 | break; | |
690 | default: | |
691 | printk(KERN_ERR "Unable to determine Adaptec DMA priority. Disabling board\n"); | |
692 | return -1; | |
693 | }; | |
694 | switch (inquiry_result[1]) { | |
695 | case 0x40: | |
696 | *irq_level = 15; | |
697 | break; | |
698 | case 0x20: | |
699 | *irq_level = 14; | |
700 | break; | |
701 | case 0x8: | |
702 | *irq_level = 12; | |
703 | break; | |
704 | case 0x4: | |
705 | *irq_level = 11; | |
706 | break; | |
707 | case 0x2: | |
708 | *irq_level = 10; | |
709 | break; | |
710 | case 0x1: | |
711 | *irq_level = 9; | |
712 | break; | |
713 | default: | |
714 | printk(KERN_ERR "Unable to determine Adaptec IRQ level. Disabling board\n"); | |
715 | return -1; | |
716 | }; | |
717 | *scsi_id = inquiry_result[2] & 7; | |
718 | return 0; | |
719 | } | |
720 | ||
721 | /* This function should only be called for 1542C boards - we can detect | |
722 | the special firmware settings and unlock the board */ | |
723 | ||
643a7c43 | 724 | static int aha1542_mbenable(int base) |
1da177e4 | 725 | { |
cb5b570c OZ |
726 | static u8 mbenable_cmd[3]; |
727 | static u8 mbenable_result[2]; | |
1da177e4 LT |
728 | int retval; |
729 | ||
730 | retval = BIOS_TRANSLATION_6432; | |
731 | ||
0c2b6481 | 732 | aha1542_outb(base, CMD_EXTBIOS); |
f8846be3 | 733 | if (aha1542_in(base, mbenable_result, 2, 100)) |
1da177e4 | 734 | return retval; |
2093bfa1 OZ |
735 | if (!wait_mask(INTRFLAGS(base), INTRMASK, HACC, 0, 100)) |
736 | goto fail; | |
1da177e4 LT |
737 | aha1542_intr_reset(base); |
738 | ||
739 | if ((mbenable_result[0] & 0x08) || mbenable_result[1]) { | |
740 | mbenable_cmd[0] = CMD_MBENABLE; | |
741 | mbenable_cmd[1] = 0; | |
742 | mbenable_cmd[2] = mbenable_result[1]; | |
743 | ||
744 | if ((mbenable_result[0] & 0x08) && (mbenable_result[1] & 0x03)) | |
745 | retval = BIOS_TRANSLATION_25563; | |
746 | ||
747 | aha1542_out(base, mbenable_cmd, 3); | |
2093bfa1 OZ |
748 | if (!wait_mask(INTRFLAGS(base), INTRMASK, HACC, 0, 0)) |
749 | goto fail; | |
1da177e4 LT |
750 | }; |
751 | while (0) { | |
752 | fail: | |
753 | printk(KERN_ERR "aha1542_mbenable: Mailbox init failed\n"); | |
754 | } | |
755 | aha1542_intr_reset(base); | |
756 | return retval; | |
757 | } | |
758 | ||
759 | /* Query the board to find out if it is a 1542 or a 1740, or whatever. */ | |
643a7c43 | 760 | static int aha1542_query(int base_io, int *transl) |
1da177e4 | 761 | { |
cb5b570c | 762 | u8 inquiry_result[4]; |
1da177e4 LT |
763 | int i; |
764 | i = inb(STATUS(base_io)); | |
765 | if (i & DF) { | |
766 | i = inb(DATA(base_io)); | |
767 | }; | |
0c2b6481 | 768 | aha1542_outb(base_io, CMD_INQUIRY); |
f8846be3 | 769 | aha1542_in(base_io, inquiry_result, 4, 0); |
2093bfa1 | 770 | if (!wait_mask(INTRFLAGS(base_io), INTRMASK, HACC, 0, 0)) |
1da177e4 | 771 | printk(KERN_ERR "aha1542_detect: query card type\n"); |
1da177e4 LT |
772 | aha1542_intr_reset(base_io); |
773 | ||
774 | *transl = BIOS_TRANSLATION_6432; /* Default case */ | |
775 | ||
776 | /* For an AHA1740 series board, we ignore the board since there is a | |
777 | hardware bug which can lead to wrong blocks being returned if the board | |
778 | is operating in the 1542 emulation mode. Since there is an extended mode | |
779 | driver, we simply ignore the board and let the 1740 driver pick it up. | |
780 | */ | |
781 | ||
782 | if (inquiry_result[0] == 0x43) { | |
783 | printk(KERN_INFO "aha1542.c: Emulation mode not supported for AHA 174N hardware.\n"); | |
784 | return 1; | |
785 | }; | |
786 | ||
787 | /* Always call this - boards that do not support extended bios translation | |
788 | will ignore the command, and we will set the proper default */ | |
789 | ||
790 | *transl = aha1542_mbenable(base_io); | |
791 | ||
792 | return 0; | |
793 | } | |
794 | ||
795 | #ifndef MODULE | |
796 | static char *setup_str[MAXBOARDS] __initdata; | |
797 | static int setup_idx = 0; | |
798 | ||
799 | static void __init aha1542_setup(char *str, int *ints) | |
800 | { | |
801 | const char *ahausage = "aha1542: usage: aha1542=<PORTBASE>[,<BUSON>,<BUSOFF>[,<DMASPEED>]]\n"; | |
802 | int setup_portbase; | |
803 | ||
804 | if (setup_idx >= MAXBOARDS) { | |
805 | printk(KERN_ERR "aha1542: aha1542_setup called too many times! Bad LILO params ?\n"); | |
806 | printk(KERN_ERR " Entryline 1: %s\n", setup_str[0]); | |
807 | printk(KERN_ERR " Entryline 2: %s\n", setup_str[1]); | |
808 | printk(KERN_ERR " This line: %s\n", str); | |
809 | return; | |
810 | } | |
811 | if (ints[0] < 1 || ints[0] > 4) { | |
812 | printk(KERN_ERR "aha1542: %s\n", str); | |
813 | printk(ahausage); | |
814 | printk(KERN_ERR "aha1542: Wrong parameters may cause system malfunction.. We try anyway..\n"); | |
815 | } | |
816 | setup_called[setup_idx] = ints[0]; | |
817 | setup_str[setup_idx] = str; | |
818 | ||
819 | setup_portbase = ints[0] >= 1 ? ints[1] : 0; /* Preserve the default value.. */ | |
820 | setup_buson[setup_idx] = ints[0] >= 2 ? ints[2] : 7; | |
821 | setup_busoff[setup_idx] = ints[0] >= 3 ? ints[3] : 5; | |
822 | if (ints[0] >= 4) | |
823 | { | |
824 | int atbt = -1; | |
825 | switch (ints[4]) { | |
826 | case 5: | |
827 | atbt = 0x00; | |
828 | break; | |
829 | case 6: | |
830 | atbt = 0x04; | |
831 | break; | |
832 | case 7: | |
833 | atbt = 0x01; | |
834 | break; | |
835 | case 8: | |
836 | atbt = 0x02; | |
837 | break; | |
838 | case 10: | |
839 | atbt = 0x03; | |
840 | break; | |
841 | default: | |
842 | printk(KERN_ERR "aha1542: %s\n", str); | |
843 | printk(ahausage); | |
844 | printk(KERN_ERR "aha1542: Valid values for DMASPEED are 5-8, 10 MB/s. Using jumper defaults.\n"); | |
845 | break; | |
846 | } | |
847 | setup_dmaspeed[setup_idx] = atbt; | |
848 | } | |
849 | if (setup_portbase != 0) | |
850 | bases[setup_idx] = setup_portbase; | |
851 | ||
852 | ++setup_idx; | |
853 | } | |
854 | ||
855 | static int __init do_setup(char *str) | |
856 | { | |
857 | int ints[5]; | |
858 | ||
859 | int count=setup_idx; | |
860 | ||
6391a113 | 861 | get_options(str, ARRAY_SIZE(ints), ints); |
1da177e4 LT |
862 | aha1542_setup(str,ints); |
863 | ||
864 | return count<setup_idx; | |
865 | } | |
866 | ||
867 | __setup("aha1542=",do_setup); | |
868 | #endif | |
869 | ||
870 | /* return non-zero on detection */ | |
643a7c43 | 871 | static struct Scsi_Host *aha1542_hw_init(struct scsi_host_template *tpnt, struct device *pdev, int indx) |
1da177e4 LT |
872 | { |
873 | unsigned char dma_chan; | |
874 | unsigned char irq_level; | |
875 | unsigned char scsi_id; | |
876 | unsigned long flags; | |
877 | unsigned int base_io; | |
878 | int trans; | |
879 | struct Scsi_Host *shpnt = NULL; | |
e98878f7 | 880 | struct aha1542_hostdata *aha1542; |
1da177e4 LT |
881 | |
882 | DEB(printk("aha1542_detect: \n")); | |
883 | ||
884 | tpnt->proc_name = "aha1542"; | |
885 | ||
1da177e4 | 886 | if (bases[indx] != 0 && request_region(bases[indx], 4, "aha1542")) { |
643a7c43 | 887 | shpnt = scsi_host_alloc(tpnt, |
1da177e4 LT |
888 | sizeof(struct aha1542_hostdata)); |
889 | ||
890 | if(shpnt==NULL) { | |
891 | release_region(bases[indx], 4); | |
643a7c43 | 892 | return NULL; |
1da177e4 | 893 | } |
e98878f7 | 894 | aha1542 = shost_priv(shpnt); |
1da177e4 LT |
895 | if (!aha1542_test_port(bases[indx], shpnt)) |
896 | goto unregister; | |
897 | ||
1da177e4 LT |
898 | base_io = bases[indx]; |
899 | ||
900 | /* Set the Bus on/off-times as not to ruin floppy performance */ | |
901 | { | |
cb5b570c OZ |
902 | u8 oncmd[] = {CMD_BUSON_TIME, 7}; |
903 | u8 offcmd[] = {CMD_BUSOFF_TIME, 5}; | |
1da177e4 LT |
904 | |
905 | if (setup_called[indx]) { | |
906 | oncmd[1] = setup_buson[indx]; | |
907 | offcmd[1] = setup_busoff[indx]; | |
908 | } | |
909 | aha1542_intr_reset(base_io); | |
910 | aha1542_out(base_io, oncmd, 2); | |
2093bfa1 OZ |
911 | if (!wait_mask(INTRFLAGS(base_io), INTRMASK, HACC, 0, 0)) |
912 | goto fail; | |
1da177e4 LT |
913 | aha1542_intr_reset(base_io); |
914 | aha1542_out(base_io, offcmd, 2); | |
2093bfa1 OZ |
915 | if (!wait_mask(INTRFLAGS(base_io), INTRMASK, HACC, 0, 0)) |
916 | goto fail; | |
1da177e4 | 917 | if (setup_dmaspeed[indx] >= 0) { |
cb5b570c | 918 | u8 dmacmd[] = {CMD_DMASPEED, 0}; |
1da177e4 LT |
919 | dmacmd[1] = setup_dmaspeed[indx]; |
920 | aha1542_intr_reset(base_io); | |
921 | aha1542_out(base_io, dmacmd, 2); | |
2093bfa1 OZ |
922 | if (!wait_mask(INTRFLAGS(base_io), INTRMASK, HACC, 0, 0)) |
923 | goto fail; | |
1da177e4 LT |
924 | } |
925 | while (0) { | |
926 | fail: | |
927 | printk(KERN_ERR "aha1542_detect: setting bus on/off-time failed\n"); | |
928 | } | |
929 | aha1542_intr_reset(base_io); | |
930 | } | |
931 | if (aha1542_query(base_io, &trans)) | |
932 | goto unregister; | |
933 | ||
934 | if (aha1542_getconfig(base_io, &irq_level, &dma_chan, &scsi_id) == -1) | |
935 | goto unregister; | |
936 | ||
937 | printk(KERN_INFO "Configuring Adaptec (SCSI-ID %d) at IO:%x, IRQ %d", scsi_id, base_io, irq_level); | |
938 | if (dma_chan != 0xFF) | |
939 | printk(", DMA priority %d", dma_chan); | |
940 | printk("\n"); | |
941 | ||
1da177e4 LT |
942 | setup_mailboxes(base_io, shpnt); |
943 | ||
1da177e4 LT |
944 | DEB(printk("aha1542_detect: enable interrupt channel %d\n", irq_level)); |
945 | spin_lock_irqsave(&aha1542_lock, flags); | |
87c4d7bc JG |
946 | if (request_irq(irq_level, do_aha1542_intr_handle, 0, |
947 | "aha1542", shpnt)) { | |
1da177e4 LT |
948 | printk(KERN_ERR "Unable to allocate IRQ for adaptec controller.\n"); |
949 | spin_unlock_irqrestore(&aha1542_lock, flags); | |
950 | goto unregister; | |
951 | } | |
952 | if (dma_chan != 0xFF) { | |
953 | if (request_dma(dma_chan, "aha1542")) { | |
954 | printk(KERN_ERR "Unable to allocate DMA channel for Adaptec.\n"); | |
87c4d7bc | 955 | free_irq(irq_level, shpnt); |
1da177e4 LT |
956 | spin_unlock_irqrestore(&aha1542_lock, flags); |
957 | goto unregister; | |
958 | } | |
959 | if (dma_chan == 0 || dma_chan >= 5) { | |
960 | set_dma_mode(dma_chan, DMA_MODE_CASCADE); | |
961 | enable_dma(dma_chan); | |
962 | } | |
963 | } | |
87c4d7bc | 964 | |
1da177e4 LT |
965 | shpnt->this_id = scsi_id; |
966 | shpnt->unique_id = base_io; | |
967 | shpnt->io_port = base_io; | |
968 | shpnt->n_io_port = 4; /* Number of bytes of I/O space used */ | |
969 | shpnt->dma_channel = dma_chan; | |
970 | shpnt->irq = irq_level; | |
e98878f7 | 971 | aha1542->bios_translation = trans; |
1da177e4 LT |
972 | if (trans == BIOS_TRANSLATION_25563) |
973 | printk(KERN_INFO "aha1542.c: Using extended bios translation\n"); | |
e98878f7 OZ |
974 | aha1542->aha1542_last_mbi_used = (2 * AHA1542_MAILBOXES - 1); |
975 | aha1542->aha1542_last_mbo_used = (AHA1542_MAILBOXES - 1); | |
976 | memset(aha1542->SCint, 0, sizeof(aha1542->SCint)); | |
1da177e4 | 977 | spin_unlock_irqrestore(&aha1542_lock, flags); |
1da177e4 | 978 | |
643a7c43 OZ |
979 | if (scsi_add_host(shpnt, pdev)) { |
980 | if (shpnt->dma_channel != 0xff) | |
981 | free_dma(shpnt->dma_channel); | |
982 | free_irq(irq_level, shpnt); | |
983 | goto unregister; | |
1da177e4 LT |
984 | } |
985 | ||
643a7c43 | 986 | scsi_scan_host(shpnt); |
1da177e4 | 987 | |
643a7c43 | 988 | return shpnt; |
1da177e4 LT |
989 | unregister: |
990 | release_region(bases[indx], 4); | |
643a7c43 OZ |
991 | scsi_host_put(shpnt); |
992 | return NULL; | |
1da177e4 LT |
993 | |
994 | }; | |
995 | ||
643a7c43 | 996 | return NULL; |
1da177e4 LT |
997 | } |
998 | ||
999 | static int aha1542_release(struct Scsi_Host *shost) | |
1000 | { | |
643a7c43 | 1001 | scsi_remove_host(shost); |
1da177e4 | 1002 | if (shost->irq) |
87c4d7bc | 1003 | free_irq(shost->irq, shost); |
1da177e4 LT |
1004 | if (shost->dma_channel != 0xff) |
1005 | free_dma(shost->dma_channel); | |
1006 | if (shost->io_port && shost->n_io_port) | |
1007 | release_region(shost->io_port, shost->n_io_port); | |
643a7c43 | 1008 | scsi_host_put(shost); |
1da177e4 LT |
1009 | return 0; |
1010 | } | |
1011 | ||
1da177e4 | 1012 | |
1da177e4 LT |
1013 | /* |
1014 | * This is a device reset. This is handled by sending a special command | |
1015 | * to the device. | |
1016 | */ | |
1017 | static int aha1542_dev_reset(Scsi_Cmnd * SCpnt) | |
1018 | { | |
e98878f7 | 1019 | struct aha1542_hostdata *aha1542 = shost_priv(SCpnt->device->host); |
1da177e4 | 1020 | unsigned long flags; |
e98878f7 | 1021 | struct mailbox *mb = aha1542->mb; |
cb5b570c OZ |
1022 | u8 target = SCpnt->device->id; |
1023 | u8 lun = SCpnt->device->lun; | |
1da177e4 | 1024 | int mbo; |
e98878f7 | 1025 | struct ccb *ccb = aha1542->ccb; |
1da177e4 | 1026 | |
1da177e4 | 1027 | spin_lock_irqsave(&aha1542_lock, flags); |
e98878f7 | 1028 | mbo = aha1542->aha1542_last_mbo_used + 1; |
1da177e4 LT |
1029 | if (mbo >= AHA1542_MAILBOXES) |
1030 | mbo = 0; | |
1031 | ||
1032 | do { | |
e98878f7 | 1033 | if (mb[mbo].status == 0 && aha1542->SCint[mbo] == NULL) |
1da177e4 LT |
1034 | break; |
1035 | mbo++; | |
1036 | if (mbo >= AHA1542_MAILBOXES) | |
1037 | mbo = 0; | |
e98878f7 | 1038 | } while (mbo != aha1542->aha1542_last_mbo_used); |
1da177e4 | 1039 | |
e98878f7 | 1040 | if (mb[mbo].status || aha1542->SCint[mbo]) |
1da177e4 LT |
1041 | panic("Unable to find empty mailbox for aha1542.\n"); |
1042 | ||
e98878f7 OZ |
1043 | aha1542->SCint[mbo] = SCpnt; /* This will effectively |
1044 | prevent someone else from | |
1045 | screwing with this cdb. */ | |
1da177e4 | 1046 | |
e98878f7 | 1047 | aha1542->aha1542_last_mbo_used = mbo; |
1da177e4 LT |
1048 | spin_unlock_irqrestore(&aha1542_lock, flags); |
1049 | ||
10be6250 | 1050 | any2scsi(mb[mbo].ccbptr, isa_virt_to_bus(&ccb[mbo])); /* This gets trashed for some reason */ |
1da177e4 LT |
1051 | |
1052 | memset(&ccb[mbo], 0, sizeof(struct ccb)); | |
1053 | ||
1054 | ccb[mbo].op = 0x81; /* BUS DEVICE RESET */ | |
1055 | ||
1056 | ccb[mbo].idlun = (target & 7) << 5 | (lun & 7); /*SCSI Target Id */ | |
1057 | ||
1058 | ccb[mbo].linkptr[0] = ccb[mbo].linkptr[1] = ccb[mbo].linkptr[2] = 0; | |
1059 | ccb[mbo].commlinkid = 0; | |
1060 | ||
1061 | /* | |
1062 | * Now tell the 1542 to flush all pending commands for this | |
1063 | * target | |
1064 | */ | |
0c2b6481 | 1065 | aha1542_outb(SCpnt->device->host->io_port, CMD_START_SCSI); |
1da177e4 | 1066 | |
017560fc JG |
1067 | scmd_printk(KERN_WARNING, SCpnt, |
1068 | "Trying device reset for target\n"); | |
1da177e4 LT |
1069 | |
1070 | return SUCCESS; | |
1da177e4 LT |
1071 | } |
1072 | ||
8537cba8 | 1073 | static int aha1542_reset(Scsi_Cmnd *SCpnt, u8 reset_cmd) |
1da177e4 | 1074 | { |
e98878f7 | 1075 | struct aha1542_hostdata *aha1542 = shost_priv(SCpnt->device->host); |
1da177e4 LT |
1076 | int i; |
1077 | ||
1078 | /* | |
1079 | * This does a scsi reset for all devices on the bus. | |
1080 | * In principle, we could also reset the 1542 - should | |
1081 | * we do this? Try this first, and we can add that later | |
1082 | * if it turns out to be useful. | |
1083 | */ | |
8537cba8 | 1084 | outb(reset_cmd, CONTROL(SCpnt->device->host->io_port)); |
1da177e4 LT |
1085 | |
1086 | /* | |
1087 | * Wait for the thing to settle down a bit. Unfortunately | |
1088 | * this is going to basically lock up the machine while we | |
1089 | * wait for this to complete. To be 100% correct, we need to | |
1090 | * check for timeout, and if we are doing something like this | |
1091 | * we are pretty desperate anyways. | |
1092 | */ | |
1da177e4 LT |
1093 | ssleep(4); |
1094 | spin_lock_irq(SCpnt->device->host->host_lock); | |
1095 | ||
2093bfa1 | 1096 | if (!wait_mask(STATUS(SCpnt->device->host->io_port), |
a13b3722 OZ |
1097 | STATMASK, INIT | IDLE, STST | DIAGF | INVDCMD | DF | CDF, 0)) { |
1098 | spin_unlock_irq(SCpnt->device->host->host_lock); | |
1099 | return FAILED; | |
1100 | } | |
8537cba8 OZ |
1101 | /* |
1102 | * We need to do this too before the 1542 can interact with | |
1103 | * us again after host reset. | |
1104 | */ | |
1105 | if (reset_cmd & HRST) | |
1106 | setup_mailboxes(SCpnt->device->host->io_port, SCpnt->device->host); | |
1da177e4 LT |
1107 | /* |
1108 | * Now try to pick up the pieces. For all pending commands, | |
1109 | * free any internal data structures, and basically clear things | |
1110 | * out. We do not try and restart any commands or anything - | |
1111 | * the strategy handler takes care of that crap. | |
1112 | */ | |
1113 | printk(KERN_WARNING "Sent BUS RESET to scsi host %d\n", SCpnt->device->host->host_no); | |
1114 | ||
1115 | for (i = 0; i < AHA1542_MAILBOXES; i++) { | |
e98878f7 | 1116 | if (aha1542->SCint[i] != NULL) { |
1da177e4 | 1117 | Scsi_Cmnd *SCtmp; |
e98878f7 | 1118 | SCtmp = aha1542->SCint[i]; |
1da177e4 | 1119 | |
1da177e4 LT |
1120 | if (SCtmp->device->soft_reset) { |
1121 | /* | |
1122 | * If this device implements the soft reset option, | |
1123 | * then it is still holding onto the command, and | |
1124 | * may yet complete it. In this case, we don't | |
1125 | * flush the data. | |
1126 | */ | |
1127 | continue; | |
1128 | } | |
c9475cb0 JJ |
1129 | kfree(SCtmp->host_scribble); |
1130 | SCtmp->host_scribble = NULL; | |
e98878f7 OZ |
1131 | aha1542->SCint[i] = NULL; |
1132 | aha1542->mb[i].status = 0; | |
1da177e4 LT |
1133 | } |
1134 | } | |
1135 | ||
68b3aa7c | 1136 | spin_unlock_irq(SCpnt->device->host->host_lock); |
1da177e4 | 1137 | return SUCCESS; |
1da177e4 LT |
1138 | } |
1139 | ||
8537cba8 | 1140 | static int aha1542_bus_reset(Scsi_Cmnd *SCpnt) |
1da177e4 | 1141 | { |
8537cba8 OZ |
1142 | return aha1542_reset(SCpnt, SCRST); |
1143 | } | |
1da177e4 | 1144 | |
8537cba8 OZ |
1145 | static int aha1542_host_reset(Scsi_Cmnd *SCpnt) |
1146 | { | |
1147 | return aha1542_reset(SCpnt, HRST | SCRST); | |
1da177e4 LT |
1148 | } |
1149 | ||
1da177e4 LT |
1150 | static int aha1542_biosparam(struct scsi_device *sdev, |
1151 | struct block_device *bdev, sector_t capacity, int *ip) | |
1152 | { | |
e98878f7 | 1153 | struct aha1542_hostdata *aha1542 = shost_priv(sdev->host); |
1da177e4 LT |
1154 | int translation_algorithm; |
1155 | int size = capacity; | |
1156 | ||
e98878f7 | 1157 | translation_algorithm = aha1542->bios_translation; |
1da177e4 LT |
1158 | |
1159 | if ((size >> 11) > 1024 && translation_algorithm == BIOS_TRANSLATION_25563) { | |
1160 | /* Please verify that this is the same as what DOS returns */ | |
1161 | ip[0] = 255; | |
1162 | ip[1] = 63; | |
1163 | ip[2] = size / 255 / 63; | |
1164 | } else { | |
1165 | ip[0] = 64; | |
1166 | ip[1] = 32; | |
1167 | ip[2] = size >> 11; | |
1168 | } | |
1169 | ||
1170 | return 0; | |
1171 | } | |
1172 | MODULE_LICENSE("GPL"); | |
1173 | ||
d0be4a7d | 1174 | static struct scsi_host_template driver_template = { |
643a7c43 | 1175 | .module = THIS_MODULE, |
1da177e4 LT |
1176 | .proc_name = "aha1542", |
1177 | .name = "Adaptec 1542", | |
1da177e4 | 1178 | .queuecommand = aha1542_queuecommand, |
1da177e4 LT |
1179 | .eh_device_reset_handler= aha1542_dev_reset, |
1180 | .eh_bus_reset_handler = aha1542_bus_reset, | |
1181 | .eh_host_reset_handler = aha1542_host_reset, | |
1182 | .bios_param = aha1542_biosparam, | |
1183 | .can_queue = AHA1542_MAILBOXES, | |
1184 | .this_id = 7, | |
10be6250 OZ |
1185 | .sg_tablesize = 16, |
1186 | .cmd_per_lun = 1, | |
1da177e4 LT |
1187 | .unchecked_isa_dma = 1, |
1188 | .use_clustering = ENABLE_CLUSTERING, | |
1189 | }; | |
643a7c43 OZ |
1190 | |
1191 | static int aha1542_isa_match(struct device *pdev, unsigned int ndev) | |
1192 | { | |
1193 | struct Scsi_Host *sh = aha1542_hw_init(&driver_template, pdev, ndev); | |
1194 | ||
1195 | if (!sh) | |
1196 | return 0; | |
1197 | ||
1198 | dev_set_drvdata(pdev, sh); | |
1199 | return 1; | |
1200 | } | |
1201 | ||
1202 | static int aha1542_isa_remove(struct device *pdev, | |
1203 | unsigned int ndev) | |
1204 | { | |
1205 | aha1542_release(dev_get_drvdata(pdev)); | |
1206 | dev_set_drvdata(pdev, NULL); | |
1207 | return 0; | |
1208 | } | |
1209 | ||
1210 | static struct isa_driver aha1542_isa_driver = { | |
1211 | .match = aha1542_isa_match, | |
1212 | .remove = aha1542_isa_remove, | |
1213 | .driver = { | |
1214 | .name = "aha1542" | |
1215 | }, | |
1216 | }; | |
1217 | static int isa_registered; | |
1218 | ||
1219 | #ifdef CONFIG_PNP | |
1220 | static struct pnp_device_id aha1542_pnp_ids[] = { | |
1221 | { .id = "ADP1542" }, | |
1222 | { .id = "" } | |
1223 | }; | |
1224 | MODULE_DEVICE_TABLE(pnp, aha1542_pnp_ids); | |
1225 | ||
1226 | static int aha1542_pnp_probe(struct pnp_dev *pdev, const struct pnp_device_id *id) | |
1227 | { | |
1228 | int indx; | |
1229 | struct Scsi_Host *sh; | |
1230 | ||
1231 | for (indx = 0; indx < ARRAY_SIZE(bases); indx++) { | |
1232 | if (bases[indx]) | |
1233 | continue; | |
1234 | ||
1235 | if (pnp_activate_dev(pdev) < 0) | |
1236 | continue; | |
1237 | ||
1238 | bases[indx] = pnp_port_start(pdev, 0); | |
1239 | ||
1240 | /* The card can be queried for its DMA, we have | |
1241 | the DMA set up that is enough */ | |
1242 | ||
1243 | printk(KERN_INFO "ISAPnP found an AHA1535 at I/O 0x%03X\n", bases[indx]); | |
1244 | } | |
1245 | ||
1246 | sh = aha1542_hw_init(&driver_template, &pdev->dev, indx); | |
1247 | if (!sh) | |
1248 | return -ENODEV; | |
1249 | ||
1250 | pnp_set_drvdata(pdev, sh); | |
1251 | return 0; | |
1252 | } | |
1253 | ||
1254 | static void aha1542_pnp_remove(struct pnp_dev *pdev) | |
1255 | { | |
1256 | aha1542_release(pnp_get_drvdata(pdev)); | |
1257 | pnp_set_drvdata(pdev, NULL); | |
1258 | } | |
1259 | ||
1260 | static struct pnp_driver aha1542_pnp_driver = { | |
1261 | .name = "aha1542", | |
1262 | .id_table = aha1542_pnp_ids, | |
1263 | .probe = aha1542_pnp_probe, | |
1264 | .remove = aha1542_pnp_remove, | |
1265 | }; | |
1266 | static int pnp_registered; | |
1267 | #endif /* CONFIG_PNP */ | |
1268 | ||
1269 | static int __init aha1542_init(void) | |
1270 | { | |
1271 | int ret = 0; | |
1272 | #ifdef MODULE | |
1273 | int atbt = -1; | |
1274 | ||
1275 | bases[0] = aha1542[0]; | |
1276 | setup_buson[0] = aha1542[1]; | |
1277 | setup_busoff[0] = aha1542[2]; | |
1278 | ||
1279 | switch (aha1542[3]) { | |
1280 | case 5: | |
1281 | atbt = 0x00; | |
1282 | break; | |
1283 | case 6: | |
1284 | atbt = 0x04; | |
1285 | break; | |
1286 | case 7: | |
1287 | atbt = 0x01; | |
1288 | break; | |
1289 | case 8: | |
1290 | atbt = 0x02; | |
1291 | break; | |
1292 | case 10: | |
1293 | atbt = 0x03; | |
1294 | break; | |
1295 | }; | |
1296 | setup_dmaspeed[0] = atbt; | |
1297 | #endif | |
1298 | ||
1299 | #ifdef CONFIG_PNP | |
1300 | if (isapnp) { | |
1301 | ret = pnp_register_driver(&aha1542_pnp_driver); | |
1302 | if (!ret) | |
1303 | pnp_registered = 1; | |
1304 | } | |
1305 | #endif | |
1306 | ret = isa_register_driver(&aha1542_isa_driver, MAXBOARDS); | |
1307 | if (!ret) | |
1308 | isa_registered = 1; | |
1309 | ||
1310 | #ifdef CONFIG_PNP | |
1311 | if (pnp_registered) | |
1312 | ret = 0; | |
1313 | #endif | |
1314 | if (isa_registered) | |
1315 | ret = 0; | |
1316 | ||
1317 | return ret; | |
1318 | } | |
1319 | ||
1320 | static void __exit aha1542_exit(void) | |
1321 | { | |
1322 | #ifdef CONFIG_PNP | |
1323 | if (pnp_registered) | |
1324 | pnp_unregister_driver(&aha1542_pnp_driver); | |
1325 | #endif | |
1326 | if (isa_registered) | |
1327 | isa_unregister_driver(&aha1542_isa_driver); | |
1328 | } | |
1329 | ||
1330 | module_init(aha1542_init); | |
1331 | module_exit(aha1542_exit); |