Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * ASCII values for a number of symbolic constants, printing functions, | |
3 | * etc. | |
4 | * Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422) | |
5 | * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002) | |
6 | * by D. Gilbert and aeb (20020609) | |
b4567ca6 | 7 | * Update to SPC-4 T10/1713-D Rev 20, 22 May 2009, D. Gilbert 20090624 |
1da177e4 LT |
8 | */ |
9 | ||
1da177e4 LT |
10 | #include <linux/blkdev.h> |
11 | #include <linux/module.h> | |
12 | #include <linux/kernel.h> | |
13 | ||
14 | #include <scsi/scsi.h> | |
beb40487 | 15 | #include <scsi/scsi_cmnd.h> |
1da177e4 LT |
16 | #include <scsi/scsi_device.h> |
17 | #include <scsi/scsi_host.h> | |
1da177e4 | 18 | #include <scsi/scsi_eh.h> |
de540a53 | 19 | #include <scsi/scsi_dbg.h> |
1da177e4 LT |
20 | |
21 | ||
22 | ||
23 | /* Commands with service actions that change the command name */ | |
24 | #define MAINTENANCE_IN 0xa3 | |
25 | #define MAINTENANCE_OUT 0xa4 | |
26 | #define SERVICE_ACTION_IN_12 0xab | |
27 | #define SERVICE_ACTION_OUT_12 0xa9 | |
28 | #define SERVICE_ACTION_IN_16 0x9e | |
29 | #define SERVICE_ACTION_OUT_16 0x9f | |
1da177e4 LT |
30 | |
31 | ||
32 | ||
33 | #ifdef CONFIG_SCSI_CONSTANTS | |
34 | static const char * cdb_byte0_names[] = { | |
35 | /* 00-03 */ "Test Unit Ready", "Rezero Unit/Rewind", NULL, "Request Sense", | |
36 | /* 04-07 */ "Format Unit/Medium", "Read Block Limits", NULL, | |
37 | "Reasssign Blocks", | |
a507c6a2 | 38 | /* 08-0d */ "Read(6)", NULL, "Write(6)", "Seek(6)", NULL, NULL, |
1da177e4 | 39 | /* 0e-12 */ NULL, "Read Reverse", "Write Filemarks", "Space", "Inquiry", |
a507c6a2 DG |
40 | /* 13-16 */ "Verify(6)", "Recover Buffered Data", "Mode Select(6)", |
41 | "Reserve(6)", | |
42 | /* 17-1a */ "Release(6)", "Copy", "Erase", "Mode Sense(6)", | |
1da177e4 LT |
43 | /* 1b-1d */ "Start/Stop Unit", "Receive Diagnostic", "Send Diagnostic", |
44 | /* 1e-1f */ "Prevent/Allow Medium Removal", NULL, | |
45 | /* 20-22 */ NULL, NULL, NULL, | |
46 | /* 23-28 */ "Read Format Capacities", "Set Window", | |
a507c6a2 DG |
47 | "Read Capacity(10)", NULL, NULL, "Read(10)", |
48 | /* 29-2d */ "Read Generation", "Write(10)", "Seek(10)", "Erase(10)", | |
49 | "Read updated block", | |
50 | /* 2e-31 */ "Write Verify(10)", "Verify(10)", "Search High", "Search Equal", | |
1da177e4 | 51 | /* 32-34 */ "Search Low", "Set Limits", "Prefetch/Read Position", |
a507c6a2 | 52 | /* 35-37 */ "Synchronize Cache(10)", "Lock/Unlock Cache(10)", |
1da177e4 LT |
53 | "Read Defect Data(10)", |
54 | /* 38-3c */ "Medium Scan", "Compare", "Copy Verify", "Write Buffer", | |
55 | "Read Buffer", | |
a507c6a2 DG |
56 | /* 3d-3f */ "Update Block", "Read Long(10)", "Write Long(10)", |
57 | /* 40-41 */ "Change Definition", "Write Same(10)", | |
b4567ca6 DG |
58 | /* 42-48 */ "Unmap/Read sub-channel", "Read TOC/PMA/ATIP", |
59 | "Read density support", "Play audio(10)", "Get configuration", | |
60 | "Play audio msf", "Play audio track/index", | |
a507c6a2 | 61 | /* 49-4f */ "Play track relative(10)", "Get event status notification", |
1da177e4 LT |
62 | "Pause/resume", "Log Select", "Log Sense", "Stop play/scan", |
63 | NULL, | |
64 | /* 50-55 */ "Xdwrite", "Xpwrite, Read disk info", "Xdread, Read track info", | |
a507c6a2 DG |
65 | "Reserve track", "Send OPC info", "Mode Select(10)", |
66 | /* 56-5b */ "Reserve(10)", "Release(10)", "Repair track", "Read master cue", | |
67 | "Mode Sense(10)", "Close track/session", | |
1da177e4 LT |
68 | /* 5c-5f */ "Read buffer capacity", "Send cue sheet", "Persistent reserve in", |
69 | "Persistent reserve out", | |
70 | /* 60-67 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, | |
71 | /* 68-6f */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, | |
72 | /* 70-77 */ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, | |
b4567ca6 DG |
73 | /* 78-7f */ NULL, NULL, NULL, NULL, NULL, NULL, "Extended CDB", |
74 | "Variable length", | |
a507c6a2 | 75 | /* 80-84 */ "Xdwrite(16)", "Rebuild(16)", "Regenerate(16)", "Extended copy", |
1da177e4 | 76 | "Receive copy results", |
a507c6a2 DG |
77 | /* 85-89 */ "ATA command pass through(16)", "Access control in", |
78 | "Access control out", "Read(16)", "Memory Export Out(16)", | |
b4567ca6 | 79 | /* 8a-8f */ "Write(16)", "ORWrite", "Read attributes", "Write attributes", |
a507c6a2 DG |
80 | "Write and verify(16)", "Verify(16)", |
81 | /* 90-94 */ "Pre-fetch(16)", "Synchronize cache(16)", | |
82 | "Lock/unlock cache(16)", "Write same(16)", NULL, | |
1da177e4 | 83 | /* 95-99 */ NULL, NULL, NULL, NULL, NULL, |
a507c6a2 DG |
84 | /* 9a-9f */ NULL, NULL, NULL, NULL, "Service action in(16)", |
85 | "Service action out(16)", | |
86 | /* a0-a5 */ "Report luns", "ATA command pass through(12)/Blank", | |
87 | "Security protocol in", "Maintenance in", "Maintenance out", | |
88 | "Move medium/play audio(12)", | |
1da177e4 LT |
89 | /* a6-a9 */ "Exchange medium", "Move medium attached", "Read(12)", |
90 | "Play track relative(12)", | |
91 | /* aa-ae */ "Write(12)", NULL, "Erase(12), Get Performance", | |
92 | "Read DVD structure", "Write and verify(12)", | |
93 | /* af-b1 */ "Verify(12)", "Search data high(12)", "Search data equal(12)", | |
94 | /* b2-b4 */ "Search data low(12)", "Set limits(12)", | |
95 | "Read element status attached", | |
a507c6a2 | 96 | /* b5-b6 */ "Security protocol out", "Send volume tag, set streaming", |
1da177e4 LT |
97 | /* b7-b9 */ "Read defect data(12)", "Read element status", "Read CD msf", |
98 | /* ba-bc */ "Redundancy group (in), Scan", | |
a507c6a2 DG |
99 | "Redundancy group (out), Set cd-rom speed", "Spare (in), Play cd", |
100 | /* bd-bf */ "Spare (out), Mechanism status", "Volume set (in), Read cd", | |
101 | "Volume set (out), Send DVD structure", | |
1da177e4 LT |
102 | }; |
103 | ||
104 | struct value_name_pair { | |
105 | int value; | |
106 | const char * name; | |
107 | }; | |
108 | ||
109 | static const struct value_name_pair maint_in_arr[] = { | |
b4567ca6 | 110 | {0x5, "Report identifying information"}, |
1da177e4 LT |
111 | {0xa, "Report target port groups"}, |
112 | {0xb, "Report aliases"}, | |
113 | {0xc, "Report supported operation codes"}, | |
114 | {0xd, "Report supported task management functions"}, | |
115 | {0xe, "Report priority"}, | |
a507c6a2 | 116 | {0xf, "Report timestamp"}, |
b4567ca6 | 117 | {0x10, "Management protocol in"}, |
1da177e4 | 118 | }; |
6391a113 | 119 | #define MAINT_IN_SZ ARRAY_SIZE(maint_in_arr) |
1da177e4 LT |
120 | |
121 | static const struct value_name_pair maint_out_arr[] = { | |
b4567ca6 | 122 | {0x6, "Set identifying information"}, |
1da177e4 LT |
123 | {0xa, "Set target port groups"}, |
124 | {0xb, "Change aliases"}, | |
125 | {0xe, "Set priority"}, | |
b4567ca6 DG |
126 | {0xf, "Set timestamp"}, |
127 | {0x10, "Management protocol out"}, | |
1da177e4 | 128 | }; |
6391a113 | 129 | #define MAINT_OUT_SZ ARRAY_SIZE(maint_out_arr) |
1da177e4 LT |
130 | |
131 | static const struct value_name_pair serv_in12_arr[] = { | |
132 | {0x1, "Read media serial number"}, | |
133 | }; | |
6391a113 | 134 | #define SERV_IN12_SZ ARRAY_SIZE(serv_in12_arr) |
1da177e4 LT |
135 | |
136 | static const struct value_name_pair serv_out12_arr[] = { | |
137 | {-1, "dummy entry"}, | |
138 | }; | |
6391a113 | 139 | #define SERV_OUT12_SZ ARRAY_SIZE(serv_out12_arr) |
1da177e4 LT |
140 | |
141 | static const struct value_name_pair serv_in16_arr[] = { | |
142 | {0x10, "Read capacity(16)"}, | |
143 | {0x11, "Read long(16)"}, | |
f57e4502 | 144 | {0x12, "Get LBA status"}, |
1da177e4 | 145 | }; |
6391a113 | 146 | #define SERV_IN16_SZ ARRAY_SIZE(serv_in16_arr) |
1da177e4 LT |
147 | |
148 | static const struct value_name_pair serv_out16_arr[] = { | |
149 | {0x11, "Write long(16)"}, | |
150 | {0x1f, "Notify data transfer device(16)"}, | |
151 | }; | |
6391a113 | 152 | #define SERV_OUT16_SZ ARRAY_SIZE(serv_out16_arr) |
1da177e4 LT |
153 | |
154 | static const struct value_name_pair variable_length_arr[] = { | |
155 | {0x1, "Rebuild(32)"}, | |
156 | {0x2, "Regenerate(32)"}, | |
157 | {0x3, "Xdread(32)"}, | |
158 | {0x4, "Xdwrite(32)"}, | |
159 | {0x5, "Xdwrite extended(32)"}, | |
160 | {0x6, "Xpwrite(32)"}, | |
161 | {0x7, "Xdwriteread(32)"}, | |
162 | {0x8, "Xdwrite extended(64)"}, | |
163 | {0x9, "Read(32)"}, | |
164 | {0xa, "Verify(32)"}, | |
165 | {0xb, "Write(32)"}, | |
166 | {0xc, "Write an verify(32)"}, | |
167 | {0xd, "Write same(32)"}, | |
168 | {0x8801, "Format OSD"}, | |
169 | {0x8802, "Create (osd)"}, | |
170 | {0x8803, "List (osd)"}, | |
171 | {0x8805, "Read (osd)"}, | |
172 | {0x8806, "Write (osd)"}, | |
173 | {0x8807, "Append (osd)"}, | |
174 | {0x8808, "Flush (osd)"}, | |
175 | {0x880a, "Remove (osd)"}, | |
176 | {0x880b, "Create partition (osd)"}, | |
177 | {0x880c, "Remove partition (osd)"}, | |
178 | {0x880e, "Get attributes (osd)"}, | |
179 | {0x880f, "Set attributes (osd)"}, | |
180 | {0x8812, "Create and write (osd)"}, | |
181 | {0x8815, "Create collection (osd)"}, | |
182 | {0x8816, "Remove collection (osd)"}, | |
183 | {0x8817, "List collection (osd)"}, | |
184 | {0x8818, "Set key (osd)"}, | |
185 | {0x8819, "Set master key (osd)"}, | |
186 | {0x881a, "Flush collection (osd)"}, | |
187 | {0x881b, "Flush partition (osd)"}, | |
188 | {0x881c, "Flush OSD"}, | |
189 | {0x8f7e, "Perform SCSI command (osd)"}, | |
190 | {0x8f7f, "Perform task management function (osd)"}, | |
191 | }; | |
6391a113 | 192 | #define VARIABLE_LENGTH_SZ ARRAY_SIZE(variable_length_arr) |
1da177e4 LT |
193 | |
194 | static const char * get_sa_name(const struct value_name_pair * arr, | |
195 | int arr_sz, int service_action) | |
196 | { | |
197 | int k; | |
198 | ||
199 | for (k = 0; k < arr_sz; ++k, ++arr) { | |
200 | if (service_action == arr->value) | |
201 | break; | |
202 | } | |
203 | return (k < arr_sz) ? arr->name : NULL; | |
204 | } | |
205 | ||
206 | /* attempt to guess cdb length if cdb_len==0 . No trailing linefeed. */ | |
684b7fe9 | 207 | static void print_opcode_name(unsigned char * cdbp, int cdb_len) |
1da177e4 LT |
208 | { |
209 | int sa, len, cdb0; | |
210 | const char * name; | |
1da177e4 LT |
211 | |
212 | cdb0 = cdbp[0]; | |
213 | switch(cdb0) { | |
214 | case VARIABLE_LENGTH_CMD: | |
db4742dd | 215 | len = scsi_varlen_cdb_length(cdbp); |
1da177e4 | 216 | if (len < 10) { |
684b7fe9 MP |
217 | printk("short variable length command, " |
218 | "len=%d ext_len=%d", len, cdb_len); | |
1da177e4 LT |
219 | break; |
220 | } | |
221 | sa = (cdbp[8] << 8) + cdbp[9]; | |
222 | name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa); | |
223 | if (name) { | |
684b7fe9 | 224 | printk("%s", name); |
1da177e4 LT |
225 | if ((cdb_len > 0) && (len != cdb_len)) |
226 | printk(", in_cdb_len=%d, ext_len=%d", | |
227 | len, cdb_len); | |
228 | } else { | |
684b7fe9 | 229 | printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4 LT |
230 | if ((cdb_len > 0) && (len != cdb_len)) |
231 | printk(", in_cdb_len=%d, ext_len=%d", | |
232 | len, cdb_len); | |
233 | } | |
234 | break; | |
235 | case MAINTENANCE_IN: | |
236 | sa = cdbp[1] & 0x1f; | |
237 | name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa); | |
238 | if (name) | |
684b7fe9 | 239 | printk("%s", name); |
1da177e4 | 240 | else |
684b7fe9 | 241 | printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4 LT |
242 | break; |
243 | case MAINTENANCE_OUT: | |
244 | sa = cdbp[1] & 0x1f; | |
245 | name = get_sa_name(maint_out_arr, MAINT_OUT_SZ, sa); | |
246 | if (name) | |
684b7fe9 | 247 | printk("%s", name); |
1da177e4 | 248 | else |
684b7fe9 | 249 | printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4 LT |
250 | break; |
251 | case SERVICE_ACTION_IN_12: | |
252 | sa = cdbp[1] & 0x1f; | |
253 | name = get_sa_name(serv_in12_arr, SERV_IN12_SZ, sa); | |
254 | if (name) | |
684b7fe9 | 255 | printk("%s", name); |
1da177e4 | 256 | else |
684b7fe9 | 257 | printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4 LT |
258 | break; |
259 | case SERVICE_ACTION_OUT_12: | |
260 | sa = cdbp[1] & 0x1f; | |
261 | name = get_sa_name(serv_out12_arr, SERV_OUT12_SZ, sa); | |
262 | if (name) | |
684b7fe9 | 263 | printk("%s", name); |
1da177e4 | 264 | else |
684b7fe9 | 265 | printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4 LT |
266 | break; |
267 | case SERVICE_ACTION_IN_16: | |
268 | sa = cdbp[1] & 0x1f; | |
269 | name = get_sa_name(serv_in16_arr, SERV_IN16_SZ, sa); | |
270 | if (name) | |
684b7fe9 | 271 | printk("%s", name); |
1da177e4 | 272 | else |
684b7fe9 | 273 | printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4 LT |
274 | break; |
275 | case SERVICE_ACTION_OUT_16: | |
276 | sa = cdbp[1] & 0x1f; | |
277 | name = get_sa_name(serv_out16_arr, SERV_OUT16_SZ, sa); | |
278 | if (name) | |
684b7fe9 | 279 | printk("%s", name); |
1da177e4 | 280 | else |
684b7fe9 | 281 | printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4 LT |
282 | break; |
283 | default: | |
284 | if (cdb0 < 0xc0) { | |
285 | name = cdb_byte0_names[cdb0]; | |
286 | if (name) | |
684b7fe9 | 287 | printk("%s", name); |
1da177e4 | 288 | else |
684b7fe9 | 289 | printk("cdb[0]=0x%x (reserved)", cdb0); |
1da177e4 | 290 | } else |
684b7fe9 | 291 | printk("cdb[0]=0x%x (vendor)", cdb0); |
1da177e4 LT |
292 | break; |
293 | } | |
294 | } | |
295 | ||
296 | #else /* ifndef CONFIG_SCSI_CONSTANTS */ | |
297 | ||
684b7fe9 | 298 | static void print_opcode_name(unsigned char * cdbp, int cdb_len) |
1da177e4 LT |
299 | { |
300 | int sa, len, cdb0; | |
1da177e4 LT |
301 | |
302 | cdb0 = cdbp[0]; | |
303 | switch(cdb0) { | |
304 | case VARIABLE_LENGTH_CMD: | |
db4742dd | 305 | len = scsi_varlen_cdb_length(cdbp); |
1da177e4 | 306 | if (len < 10) { |
684b7fe9 MP |
307 | printk("short opcode=0x%x command, len=%d " |
308 | "ext_len=%d", cdb0, len, cdb_len); | |
1da177e4 LT |
309 | break; |
310 | } | |
311 | sa = (cdbp[8] << 8) + cdbp[9]; | |
684b7fe9 | 312 | printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4 LT |
313 | if (len != cdb_len) |
314 | printk(", in_cdb_len=%d, ext_len=%d", len, cdb_len); | |
315 | break; | |
316 | case MAINTENANCE_IN: | |
317 | case MAINTENANCE_OUT: | |
318 | case SERVICE_ACTION_IN_12: | |
319 | case SERVICE_ACTION_OUT_12: | |
320 | case SERVICE_ACTION_IN_16: | |
321 | case SERVICE_ACTION_OUT_16: | |
322 | sa = cdbp[1] & 0x1f; | |
684b7fe9 | 323 | printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa); |
1da177e4 LT |
324 | break; |
325 | default: | |
326 | if (cdb0 < 0xc0) | |
684b7fe9 | 327 | printk("cdb[0]=0x%x", cdb0); |
1da177e4 | 328 | else |
684b7fe9 | 329 | printk("cdb[0]=0x%x (vendor)", cdb0); |
1da177e4 LT |
330 | break; |
331 | } | |
332 | } | |
333 | #endif | |
334 | ||
684b7fe9 | 335 | void __scsi_print_command(unsigned char *cdb) |
1da177e4 LT |
336 | { |
337 | int k, len; | |
338 | ||
684b7fe9 | 339 | print_opcode_name(cdb, 0); |
db4742dd | 340 | len = scsi_command_size(cdb); |
1da177e4 LT |
341 | /* print out all bytes in cdb */ |
342 | for (k = 0; k < len; ++k) | |
684b7fe9 | 343 | printk(" %02x", cdb[k]); |
1da177e4 LT |
344 | printk("\n"); |
345 | } | |
346 | EXPORT_SYMBOL(__scsi_print_command); | |
347 | ||
684b7fe9 | 348 | void scsi_print_command(struct scsi_cmnd *cmd) |
1da177e4 LT |
349 | { |
350 | int k; | |
351 | ||
684b7fe9 MP |
352 | scmd_printk(KERN_INFO, cmd, "CDB: "); |
353 | print_opcode_name(cmd->cmnd, cmd->cmd_len); | |
354 | ||
1da177e4 LT |
355 | /* print out all bytes in cdb */ |
356 | printk(":"); | |
684b7fe9 MP |
357 | for (k = 0; k < cmd->cmd_len; ++k) |
358 | printk(" %02x", cmd->cmnd[k]); | |
1da177e4 LT |
359 | printk("\n"); |
360 | } | |
684b7fe9 | 361 | EXPORT_SYMBOL(scsi_print_command); |
1da177e4 LT |
362 | |
363 | /** | |
db9dff36 | 364 | * scsi_print_status - print scsi status description |
1da177e4 LT |
365 | * @scsi_status: scsi status value |
366 | * | |
367 | * If the status is recognized, the description is printed. | |
368 | * Otherwise "Unknown status" is output. No trailing space. | |
369 | * If CONFIG_SCSI_CONSTANTS is not set, then print status in hex | |
370 | * (e.g. "0x2" for Check Condition). | |
371 | **/ | |
372 | void | |
373 | scsi_print_status(unsigned char scsi_status) { | |
374 | #ifdef CONFIG_SCSI_CONSTANTS | |
375 | const char * ccp; | |
376 | ||
377 | switch (scsi_status) { | |
378 | case 0: ccp = "Good"; break; | |
379 | case 0x2: ccp = "Check Condition"; break; | |
380 | case 0x4: ccp = "Condition Met"; break; | |
381 | case 0x8: ccp = "Busy"; break; | |
382 | case 0x10: ccp = "Intermediate"; break; | |
383 | case 0x14: ccp = "Intermediate-Condition Met"; break; | |
384 | case 0x18: ccp = "Reservation Conflict"; break; | |
385 | case 0x22: ccp = "Command Terminated"; break; /* obsolete */ | |
386 | case 0x28: ccp = "Task set Full"; break; /* was: Queue Full */ | |
387 | case 0x30: ccp = "ACA Active"; break; | |
388 | case 0x40: ccp = "Task Aborted"; break; | |
389 | default: ccp = "Unknown status"; | |
390 | } | |
391 | printk(KERN_INFO "%s", ccp); | |
392 | #else | |
393 | printk(KERN_INFO "0x%0x", scsi_status); | |
394 | #endif | |
395 | } | |
396 | EXPORT_SYMBOL(scsi_print_status); | |
397 | ||
398 | #ifdef CONFIG_SCSI_CONSTANTS | |
399 | ||
400 | struct error_info { | |
401 | unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */ | |
402 | const char * text; | |
403 | }; | |
404 | ||
62d42a62 MP |
405 | /* |
406 | * The canonical list of T10 Additional Sense Codes is available at: | |
407 | * http://www.t10.org/lists/asc-num.txt | |
408 | */ | |
409 | static const struct error_info additional[] = | |
1da177e4 LT |
410 | { |
411 | {0x0000, "No additional sense information"}, | |
412 | {0x0001, "Filemark detected"}, | |
413 | {0x0002, "End-of-partition/medium detected"}, | |
414 | {0x0003, "Setmark detected"}, | |
415 | {0x0004, "Beginning-of-partition/medium detected"}, | |
416 | {0x0005, "End-of-data detected"}, | |
417 | {0x0006, "I/O process terminated"}, | |
b4567ca6 | 418 | {0x0007, "Programmable early warning detected"}, |
1da177e4 LT |
419 | {0x0011, "Audio play operation in progress"}, |
420 | {0x0012, "Audio play operation paused"}, | |
421 | {0x0013, "Audio play operation successfully completed"}, | |
422 | {0x0014, "Audio play operation stopped due to error"}, | |
423 | {0x0015, "No current audio status to return"}, | |
424 | {0x0016, "Operation in progress"}, | |
425 | {0x0017, "Cleaning requested"}, | |
426 | {0x0018, "Erase operation in progress"}, | |
427 | {0x0019, "Locate operation in progress"}, | |
428 | {0x001A, "Rewind operation in progress"}, | |
429 | {0x001B, "Set capacity operation in progress"}, | |
430 | {0x001C, "Verify operation in progress"}, | |
a507c6a2 | 431 | {0x001D, "ATA pass through information available"}, |
b4567ca6 | 432 | {0x001E, "Conflicting SA creation request"}, |
1da177e4 LT |
433 | |
434 | {0x0100, "No index/sector signal"}, | |
435 | ||
436 | {0x0200, "No seek complete"}, | |
437 | ||
438 | {0x0300, "Peripheral device write fault"}, | |
439 | {0x0301, "No write current"}, | |
440 | {0x0302, "Excessive write errors"}, | |
441 | ||
442 | {0x0400, "Logical unit not ready, cause not reportable"}, | |
443 | {0x0401, "Logical unit is in process of becoming ready"}, | |
a507c6a2 | 444 | {0x0402, "Logical unit not ready, initializing command required"}, |
1da177e4 LT |
445 | {0x0403, "Logical unit not ready, manual intervention required"}, |
446 | {0x0404, "Logical unit not ready, format in progress"}, | |
447 | {0x0405, "Logical unit not ready, rebuild in progress"}, | |
448 | {0x0406, "Logical unit not ready, recalculation in progress"}, | |
449 | {0x0407, "Logical unit not ready, operation in progress"}, | |
450 | {0x0408, "Logical unit not ready, long write in progress"}, | |
451 | {0x0409, "Logical unit not ready, self-test in progress"}, | |
452 | {0x040A, "Logical unit not accessible, asymmetric access state " | |
453 | "transition"}, | |
454 | {0x040B, "Logical unit not accessible, target port in standby state"}, | |
455 | {0x040C, "Logical unit not accessible, target port in unavailable " | |
456 | "state"}, | |
b4567ca6 | 457 | {0x040D, "Logical unit not ready, structure check required"}, |
1da177e4 LT |
458 | {0x0410, "Logical unit not ready, auxiliary memory not accessible"}, |
459 | {0x0411, "Logical unit not ready, notify (enable spinup) required"}, | |
460 | {0x0412, "Logical unit not ready, offline"}, | |
b4567ca6 DG |
461 | {0x0413, "Logical unit not ready, SA creation in progress"}, |
462 | {0x0414, "Logical unit not ready, space allocation in progress"}, | |
1da177e4 LT |
463 | |
464 | {0x0500, "Logical unit does not respond to selection"}, | |
465 | ||
466 | {0x0600, "No reference position found"}, | |
467 | ||
468 | {0x0700, "Multiple peripheral devices selected"}, | |
469 | ||
470 | {0x0800, "Logical unit communication failure"}, | |
471 | {0x0801, "Logical unit communication time-out"}, | |
472 | {0x0802, "Logical unit communication parity error"}, | |
473 | {0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"}, | |
474 | {0x0804, "Unreachable copy target"}, | |
475 | ||
476 | {0x0900, "Track following error"}, | |
477 | {0x0901, "Tracking servo failure"}, | |
478 | {0x0902, "Focus servo failure"}, | |
479 | {0x0903, "Spindle servo failure"}, | |
480 | {0x0904, "Head select fault"}, | |
481 | ||
482 | {0x0A00, "Error log overflow"}, | |
483 | ||
484 | {0x0B00, "Warning"}, | |
485 | {0x0B01, "Warning - specified temperature exceeded"}, | |
486 | {0x0B02, "Warning - enclosure degraded"}, | |
a507c6a2 DG |
487 | {0x0B03, "Warning - background self-test failed"}, |
488 | {0x0B04, "Warning - background pre-scan detected medium error"}, | |
489 | {0x0B05, "Warning - background medium scan detected medium error"}, | |
b4567ca6 DG |
490 | {0x0B06, "Warning - non-volatile cache now volatile"}, |
491 | {0x0B07, "Warning - degraded power to non-volatile cache"}, | |
492 | {0x0B08, "Warning - power loss expected"}, | |
1da177e4 LT |
493 | |
494 | {0x0C00, "Write error"}, | |
495 | {0x0C01, "Write error - recovered with auto reallocation"}, | |
496 | {0x0C02, "Write error - auto reallocation failed"}, | |
497 | {0x0C03, "Write error - recommend reassignment"}, | |
498 | {0x0C04, "Compression check miscompare error"}, | |
499 | {0x0C05, "Data expansion occurred during compression"}, | |
500 | {0x0C06, "Block not compressible"}, | |
501 | {0x0C07, "Write error - recovery needed"}, | |
502 | {0x0C08, "Write error - recovery failed"}, | |
503 | {0x0C09, "Write error - loss of streaming"}, | |
504 | {0x0C0A, "Write error - padding blocks added"}, | |
505 | {0x0C0B, "Auxiliary memory write error"}, | |
506 | {0x0C0C, "Write error - unexpected unsolicited data"}, | |
507 | {0x0C0D, "Write error - not enough unsolicited data"}, | |
a507c6a2 | 508 | {0x0C0F, "Defects in error window"}, |
1da177e4 LT |
509 | |
510 | {0x0D00, "Error detected by third party temporary initiator"}, | |
511 | {0x0D01, "Third party device failure"}, | |
512 | {0x0D02, "Copy target device not reachable"}, | |
513 | {0x0D03, "Incorrect copy target device type"}, | |
514 | {0x0D04, "Copy target device data underrun"}, | |
515 | {0x0D05, "Copy target device data overrun"}, | |
516 | ||
517 | {0x0E00, "Invalid information unit"}, | |
518 | {0x0E01, "Information unit too short"}, | |
519 | {0x0E02, "Information unit too long"}, | |
a507c6a2 | 520 | {0x0E03, "Invalid field in command information unit"}, |
1da177e4 LT |
521 | |
522 | {0x1000, "Id CRC or ECC error"}, | |
a507c6a2 DG |
523 | {0x1001, "Logical block guard check failed"}, |
524 | {0x1002, "Logical block application tag check failed"}, | |
525 | {0x1003, "Logical block reference tag check failed"}, | |
1da177e4 LT |
526 | |
527 | {0x1100, "Unrecovered read error"}, | |
528 | {0x1101, "Read retries exhausted"}, | |
529 | {0x1102, "Error too long to correct"}, | |
530 | {0x1103, "Multiple read errors"}, | |
531 | {0x1104, "Unrecovered read error - auto reallocate failed"}, | |
532 | {0x1105, "L-EC uncorrectable error"}, | |
533 | {0x1106, "CIRC unrecovered error"}, | |
534 | {0x1107, "Data re-synchronization error"}, | |
535 | {0x1108, "Incomplete block read"}, | |
536 | {0x1109, "No gap found"}, | |
537 | {0x110A, "Miscorrected error"}, | |
538 | {0x110B, "Unrecovered read error - recommend reassignment"}, | |
539 | {0x110C, "Unrecovered read error - recommend rewrite the data"}, | |
540 | {0x110D, "De-compression CRC error"}, | |
541 | {0x110E, "Cannot decompress using declared algorithm"}, | |
542 | {0x110F, "Error reading UPC/EAN number"}, | |
543 | {0x1110, "Error reading ISRC number"}, | |
544 | {0x1111, "Read error - loss of streaming"}, | |
545 | {0x1112, "Auxiliary memory read error"}, | |
546 | {0x1113, "Read error - failed retransmission request"}, | |
a507c6a2 | 547 | {0x1114, "Read error - lba marked bad by application client"}, |
1da177e4 LT |
548 | |
549 | {0x1200, "Address mark not found for id field"}, | |
550 | ||
551 | {0x1300, "Address mark not found for data field"}, | |
552 | ||
553 | {0x1400, "Recorded entity not found"}, | |
554 | {0x1401, "Record not found"}, | |
555 | {0x1402, "Filemark or setmark not found"}, | |
556 | {0x1403, "End-of-data not found"}, | |
557 | {0x1404, "Block sequence error"}, | |
558 | {0x1405, "Record not found - recommend reassignment"}, | |
559 | {0x1406, "Record not found - data auto-reallocated"}, | |
560 | {0x1407, "Locate operation failure"}, | |
561 | ||
562 | {0x1500, "Random positioning error"}, | |
563 | {0x1501, "Mechanical positioning error"}, | |
564 | {0x1502, "Positioning error detected by read of medium"}, | |
565 | ||
566 | {0x1600, "Data synchronization mark error"}, | |
567 | {0x1601, "Data sync error - data rewritten"}, | |
568 | {0x1602, "Data sync error - recommend rewrite"}, | |
569 | {0x1603, "Data sync error - data auto-reallocated"}, | |
570 | {0x1604, "Data sync error - recommend reassignment"}, | |
571 | ||
572 | {0x1700, "Recovered data with no error correction applied"}, | |
573 | {0x1701, "Recovered data with retries"}, | |
574 | {0x1702, "Recovered data with positive head offset"}, | |
575 | {0x1703, "Recovered data with negative head offset"}, | |
576 | {0x1704, "Recovered data with retries and/or circ applied"}, | |
577 | {0x1705, "Recovered data using previous sector id"}, | |
578 | {0x1706, "Recovered data without ECC - data auto-reallocated"}, | |
579 | {0x1707, "Recovered data without ECC - recommend reassignment"}, | |
580 | {0x1708, "Recovered data without ECC - recommend rewrite"}, | |
581 | {0x1709, "Recovered data without ECC - data rewritten"}, | |
582 | ||
583 | {0x1800, "Recovered data with error correction applied"}, | |
584 | {0x1801, "Recovered data with error corr. & retries applied"}, | |
585 | {0x1802, "Recovered data - data auto-reallocated"}, | |
586 | {0x1803, "Recovered data with CIRC"}, | |
587 | {0x1804, "Recovered data with L-EC"}, | |
588 | {0x1805, "Recovered data - recommend reassignment"}, | |
589 | {0x1806, "Recovered data - recommend rewrite"}, | |
590 | {0x1807, "Recovered data with ECC - data rewritten"}, | |
591 | {0x1808, "Recovered data with linking"}, | |
592 | ||
593 | {0x1900, "Defect list error"}, | |
594 | {0x1901, "Defect list not available"}, | |
595 | {0x1902, "Defect list error in primary list"}, | |
596 | {0x1903, "Defect list error in grown list"}, | |
597 | ||
598 | {0x1A00, "Parameter list length error"}, | |
599 | ||
600 | {0x1B00, "Synchronous data transfer error"}, | |
601 | ||
602 | {0x1C00, "Defect list not found"}, | |
603 | {0x1C01, "Primary defect list not found"}, | |
604 | {0x1C02, "Grown defect list not found"}, | |
605 | ||
606 | {0x1D00, "Miscompare during verify operation"}, | |
b4567ca6 | 607 | {0x1D01, "Miscompare verify of unmapped LBA"}, |
1da177e4 LT |
608 | |
609 | {0x1E00, "Recovered id with ECC correction"}, | |
610 | ||
611 | {0x1F00, "Partial defect list transfer"}, | |
612 | ||
613 | {0x2000, "Invalid command operation code"}, | |
614 | {0x2001, "Access denied - initiator pending-enrolled"}, | |
615 | {0x2002, "Access denied - no access rights"}, | |
616 | {0x2003, "Access denied - invalid mgmt id key"}, | |
617 | {0x2004, "Illegal command while in write capable state"}, | |
618 | {0x2005, "Obsolete"}, | |
619 | {0x2006, "Illegal command while in explicit address mode"}, | |
620 | {0x2007, "Illegal command while in implicit address mode"}, | |
621 | {0x2008, "Access denied - enrollment conflict"}, | |
622 | {0x2009, "Access denied - invalid LU identifier"}, | |
623 | {0x200A, "Access denied - invalid proxy token"}, | |
624 | {0x200B, "Access denied - ACL LUN conflict"}, | |
625 | ||
626 | {0x2100, "Logical block address out of range"}, | |
627 | {0x2101, "Invalid element address"}, | |
628 | {0x2102, "Invalid address for write"}, | |
a507c6a2 | 629 | {0x2103, "Invalid write crossing layer jump"}, |
1da177e4 LT |
630 | |
631 | {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"}, | |
632 | ||
633 | {0x2400, "Invalid field in cdb"}, | |
634 | {0x2401, "CDB decryption error"}, | |
a507c6a2 DG |
635 | {0x2402, "Obsolete"}, |
636 | {0x2403, "Obsolete"}, | |
1da177e4 LT |
637 | {0x2404, "Security audit value frozen"}, |
638 | {0x2405, "Security working key frozen"}, | |
639 | {0x2406, "Nonce not unique"}, | |
640 | {0x2407, "Nonce timestamp out of range"}, | |
b4567ca6 | 641 | {0x2408, "Invalid XCDB"}, |
1da177e4 LT |
642 | |
643 | {0x2500, "Logical unit not supported"}, | |
644 | ||
645 | {0x2600, "Invalid field in parameter list"}, | |
646 | {0x2601, "Parameter not supported"}, | |
647 | {0x2602, "Parameter value invalid"}, | |
648 | {0x2603, "Threshold parameters not supported"}, | |
649 | {0x2604, "Invalid release of persistent reservation"}, | |
650 | {0x2605, "Data decryption error"}, | |
651 | {0x2606, "Too many target descriptors"}, | |
652 | {0x2607, "Unsupported target descriptor type code"}, | |
653 | {0x2608, "Too many segment descriptors"}, | |
654 | {0x2609, "Unsupported segment descriptor type code"}, | |
655 | {0x260A, "Unexpected inexact segment"}, | |
656 | {0x260B, "Inline data length exceeded"}, | |
657 | {0x260C, "Invalid operation for copy source or destination"}, | |
658 | {0x260D, "Copy segment granularity violation"}, | |
659 | {0x260E, "Invalid parameter while port is enabled"}, | |
a507c6a2 DG |
660 | {0x260F, "Invalid data-out buffer integrity check value"}, |
661 | {0x2610, "Data decryption key fail limit reached"}, | |
662 | {0x2611, "Incomplete key-associated data set"}, | |
663 | {0x2612, "Vendor specific key reference not found"}, | |
1da177e4 LT |
664 | |
665 | {0x2700, "Write protected"}, | |
666 | {0x2701, "Hardware write protected"}, | |
667 | {0x2702, "Logical unit software write protected"}, | |
668 | {0x2703, "Associated write protect"}, | |
669 | {0x2704, "Persistent write protect"}, | |
670 | {0x2705, "Permanent write protect"}, | |
671 | {0x2706, "Conditional write protect"}, | |
b4567ca6 | 672 | {0x2707, "Space allocation failed write protect"}, |
1da177e4 LT |
673 | |
674 | {0x2800, "Not ready to ready change, medium may have changed"}, | |
675 | {0x2801, "Import or export element accessed"}, | |
a507c6a2 | 676 | {0x2802, "Format-layer may have changed"}, |
b4567ca6 | 677 | {0x2803, "Import/export element accessed, medium changed"}, |
1da177e4 LT |
678 | |
679 | {0x2900, "Power on, reset, or bus device reset occurred"}, | |
680 | {0x2901, "Power on occurred"}, | |
681 | {0x2902, "Scsi bus reset occurred"}, | |
682 | {0x2903, "Bus device reset function occurred"}, | |
683 | {0x2904, "Device internal reset"}, | |
684 | {0x2905, "Transceiver mode changed to single-ended"}, | |
685 | {0x2906, "Transceiver mode changed to lvd"}, | |
686 | {0x2907, "I_T nexus loss occurred"}, | |
687 | ||
688 | {0x2A00, "Parameters changed"}, | |
689 | {0x2A01, "Mode parameters changed"}, | |
690 | {0x2A02, "Log parameters changed"}, | |
691 | {0x2A03, "Reservations preempted"}, | |
692 | {0x2A04, "Reservations released"}, | |
693 | {0x2A05, "Registrations preempted"}, | |
694 | {0x2A06, "Asymmetric access state changed"}, | |
695 | {0x2A07, "Implicit asymmetric access state transition failed"}, | |
696 | {0x2A08, "Priority changed"}, | |
697 | {0x2A09, "Capacity data has changed"}, | |
b4567ca6 DG |
698 | {0x2A0A, "Error history I_T nexus cleared"}, |
699 | {0x2A0B, "Error history snapshot released"}, | |
700 | {0x2A0C, "Error recovery attributes have changed"}, | |
701 | {0x2A0D, "Data encryption capabilities changed"}, | |
a507c6a2 DG |
702 | {0x2A10, "Timestamp changed"}, |
703 | {0x2A11, "Data encryption parameters changed by another i_t nexus"}, | |
704 | {0x2A12, "Data encryption parameters changed by vendor specific " | |
705 | "event"}, | |
706 | {0x2A13, "Data encryption key instance counter has changed"}, | |
b4567ca6 | 707 | {0x2A14, "SA creation capabilities data has changed"}, |
1da177e4 LT |
708 | |
709 | {0x2B00, "Copy cannot execute since host cannot disconnect"}, | |
710 | ||
711 | {0x2C00, "Command sequence error"}, | |
712 | {0x2C01, "Too many windows specified"}, | |
713 | {0x2C02, "Invalid combination of windows specified"}, | |
714 | {0x2C03, "Current program area is not empty"}, | |
715 | {0x2C04, "Current program area is empty"}, | |
716 | {0x2C05, "Illegal power condition request"}, | |
717 | {0x2C06, "Persistent prevent conflict"}, | |
718 | {0x2C07, "Previous busy status"}, | |
719 | {0x2C08, "Previous task set full status"}, | |
720 | {0x2C09, "Previous reservation conflict status"}, | |
721 | {0x2C0A, "Partition or collection contains user objects"}, | |
722 | {0x2C0B, "Not reserved"}, | |
723 | ||
724 | {0x2D00, "Overwrite error on update in place"}, | |
725 | ||
726 | {0x2E00, "Insufficient time for operation"}, | |
727 | ||
728 | {0x2F00, "Commands cleared by another initiator"}, | |
a507c6a2 | 729 | {0x2F01, "Commands cleared by power loss notification"}, |
62d42a62 | 730 | {0x2F02, "Commands cleared by device server"}, |
1da177e4 LT |
731 | |
732 | {0x3000, "Incompatible medium installed"}, | |
733 | {0x3001, "Cannot read medium - unknown format"}, | |
734 | {0x3002, "Cannot read medium - incompatible format"}, | |
735 | {0x3003, "Cleaning cartridge installed"}, | |
736 | {0x3004, "Cannot write medium - unknown format"}, | |
737 | {0x3005, "Cannot write medium - incompatible format"}, | |
738 | {0x3006, "Cannot format medium - incompatible medium"}, | |
739 | {0x3007, "Cleaning failure"}, | |
740 | {0x3008, "Cannot write - application code mismatch"}, | |
741 | {0x3009, "Current session not fixated for append"}, | |
742 | {0x300A, "Cleaning request rejected"}, | |
a507c6a2 DG |
743 | {0x300C, "WORM medium - overwrite attempted"}, |
744 | {0x300D, "WORM medium - integrity check"}, | |
1da177e4 | 745 | {0x3010, "Medium not formatted"}, |
b4567ca6 DG |
746 | {0x3011, "Incompatible volume type"}, |
747 | {0x3012, "Incompatible volume qualifier"}, | |
1da177e4 LT |
748 | |
749 | {0x3100, "Medium format corrupted"}, | |
750 | {0x3101, "Format command failed"}, | |
751 | {0x3102, "Zoned formatting failed due to spare linking"}, | |
752 | ||
753 | {0x3200, "No defect spare location available"}, | |
754 | {0x3201, "Defect list update failure"}, | |
755 | ||
756 | {0x3300, "Tape length error"}, | |
757 | ||
758 | {0x3400, "Enclosure failure"}, | |
759 | ||
760 | {0x3500, "Enclosure services failure"}, | |
761 | {0x3501, "Unsupported enclosure function"}, | |
762 | {0x3502, "Enclosure services unavailable"}, | |
763 | {0x3503, "Enclosure services transfer failure"}, | |
764 | {0x3504, "Enclosure services transfer refused"}, | |
765 | {0x3505, "Enclosure services checksum error"}, | |
766 | ||
767 | {0x3600, "Ribbon, ink, or toner failure"}, | |
768 | ||
769 | {0x3700, "Rounded parameter"}, | |
770 | ||
771 | {0x3800, "Event status notification"}, | |
772 | {0x3802, "Esn - power management class event"}, | |
773 | {0x3804, "Esn - media class event"}, | |
774 | {0x3806, "Esn - device busy class event"}, | |
775 | ||
776 | {0x3900, "Saving parameters not supported"}, | |
777 | ||
778 | {0x3A00, "Medium not present"}, | |
779 | {0x3A01, "Medium not present - tray closed"}, | |
780 | {0x3A02, "Medium not present - tray open"}, | |
781 | {0x3A03, "Medium not present - loadable"}, | |
782 | {0x3A04, "Medium not present - medium auxiliary memory accessible"}, | |
783 | ||
784 | {0x3B00, "Sequential positioning error"}, | |
785 | {0x3B01, "Tape position error at beginning-of-medium"}, | |
786 | {0x3B02, "Tape position error at end-of-medium"}, | |
787 | {0x3B03, "Tape or electronic vertical forms unit not ready"}, | |
788 | {0x3B04, "Slew failure"}, | |
789 | {0x3B05, "Paper jam"}, | |
790 | {0x3B06, "Failed to sense top-of-form"}, | |
791 | {0x3B07, "Failed to sense bottom-of-form"}, | |
792 | {0x3B08, "Reposition error"}, | |
793 | {0x3B09, "Read past end of medium"}, | |
794 | {0x3B0A, "Read past beginning of medium"}, | |
795 | {0x3B0B, "Position past end of medium"}, | |
796 | {0x3B0C, "Position past beginning of medium"}, | |
797 | {0x3B0D, "Medium destination element full"}, | |
798 | {0x3B0E, "Medium source element empty"}, | |
799 | {0x3B0F, "End of medium reached"}, | |
800 | {0x3B11, "Medium magazine not accessible"}, | |
801 | {0x3B12, "Medium magazine removed"}, | |
802 | {0x3B13, "Medium magazine inserted"}, | |
803 | {0x3B14, "Medium magazine locked"}, | |
804 | {0x3B15, "Medium magazine unlocked"}, | |
805 | {0x3B16, "Mechanical positioning or changer error"}, | |
806 | {0x3B17, "Read past end of user object"}, | |
b4567ca6 DG |
807 | {0x3B18, "Element disabled"}, |
808 | {0x3B19, "Element enabled"}, | |
809 | {0x3B1A, "Data transfer device removed"}, | |
810 | {0x3B1B, "Data transfer device inserted"}, | |
1da177e4 LT |
811 | |
812 | {0x3D00, "Invalid bits in identify message"}, | |
813 | ||
814 | {0x3E00, "Logical unit has not self-configured yet"}, | |
815 | {0x3E01, "Logical unit failure"}, | |
816 | {0x3E02, "Timeout on logical unit"}, | |
817 | {0x3E03, "Logical unit failed self-test"}, | |
818 | {0x3E04, "Logical unit unable to update self-test log"}, | |
819 | ||
820 | {0x3F00, "Target operating conditions have changed"}, | |
821 | {0x3F01, "Microcode has been changed"}, | |
822 | {0x3F02, "Changed operating definition"}, | |
823 | {0x3F03, "Inquiry data has changed"}, | |
824 | {0x3F04, "Component device attached"}, | |
825 | {0x3F05, "Device identifier changed"}, | |
826 | {0x3F06, "Redundancy group created or modified"}, | |
827 | {0x3F07, "Redundancy group deleted"}, | |
828 | {0x3F08, "Spare created or modified"}, | |
829 | {0x3F09, "Spare deleted"}, | |
830 | {0x3F0A, "Volume set created or modified"}, | |
831 | {0x3F0B, "Volume set deleted"}, | |
832 | {0x3F0C, "Volume set deassigned"}, | |
833 | {0x3F0D, "Volume set reassigned"}, | |
834 | {0x3F0E, "Reported luns data has changed"}, | |
835 | {0x3F0F, "Echo buffer overwritten"}, | |
836 | {0x3F10, "Medium loadable"}, | |
837 | {0x3F11, "Medium auxiliary memory accessible"}, | |
a507c6a2 DG |
838 | {0x3F12, "iSCSI IP address added"}, |
839 | {0x3F13, "iSCSI IP address removed"}, | |
840 | {0x3F14, "iSCSI IP address changed"}, | |
1da177e4 LT |
841 | /* |
842 | * {0x40NN, "Ram failure"}, | |
843 | * {0x40NN, "Diagnostic failure on component nn"}, | |
844 | * {0x41NN, "Data path failure"}, | |
845 | * {0x42NN, "Power-on or self-test failure"}, | |
846 | */ | |
847 | {0x4300, "Message error"}, | |
848 | ||
849 | {0x4400, "Internal target failure"}, | |
a507c6a2 | 850 | {0x4471, "ATA device failed set features"}, |
1da177e4 LT |
851 | |
852 | {0x4500, "Select or reselect failure"}, | |
853 | ||
854 | {0x4600, "Unsuccessful soft reset"}, | |
855 | ||
856 | {0x4700, "Scsi parity error"}, | |
857 | {0x4701, "Data phase CRC error detected"}, | |
858 | {0x4702, "Scsi parity error detected during st data phase"}, | |
a507c6a2 | 859 | {0x4703, "Information unit iuCRC error detected"}, |
1da177e4 LT |
860 | {0x4704, "Asynchronous information protection error detected"}, |
861 | {0x4705, "Protocol service CRC error"}, | |
a507c6a2 | 862 | {0x4706, "Phy test function in progress"}, |
1da177e4 LT |
863 | {0x477f, "Some commands cleared by iSCSI Protocol event"}, |
864 | ||
865 | {0x4800, "Initiator detected error message received"}, | |
866 | ||
867 | {0x4900, "Invalid message error"}, | |
868 | ||
869 | {0x4A00, "Command phase error"}, | |
870 | ||
871 | {0x4B00, "Data phase error"}, | |
872 | {0x4B01, "Invalid target port transfer tag received"}, | |
873 | {0x4B02, "Too much write data"}, | |
874 | {0x4B03, "Ack/nak timeout"}, | |
875 | {0x4B04, "Nak received"}, | |
876 | {0x4B05, "Data offset error"}, | |
877 | {0x4B06, "Initiator response timeout"}, | |
878 | ||
879 | {0x4C00, "Logical unit failed self-configuration"}, | |
880 | /* | |
881 | * {0x4DNN, "Tagged overlapped commands (nn = queue tag)"}, | |
882 | */ | |
883 | {0x4E00, "Overlapped commands attempted"}, | |
884 | ||
885 | {0x5000, "Write append error"}, | |
886 | {0x5001, "Write append position error"}, | |
887 | {0x5002, "Position error related to timing"}, | |
888 | ||
889 | {0x5100, "Erase failure"}, | |
890 | {0x5101, "Erase failure - incomplete erase operation detected"}, | |
891 | ||
892 | {0x5200, "Cartridge fault"}, | |
893 | ||
894 | {0x5300, "Media load or eject failed"}, | |
895 | {0x5301, "Unload tape failure"}, | |
896 | {0x5302, "Medium removal prevented"}, | |
a507c6a2 DG |
897 | {0x5303, "Medium removal prevented by data transfer element"}, |
898 | {0x5304, "Medium thread or unthread failure"}, | |
1da177e4 LT |
899 | |
900 | {0x5400, "Scsi to host system interface failure"}, | |
901 | ||
902 | {0x5500, "System resource failure"}, | |
903 | {0x5501, "System buffer full"}, | |
904 | {0x5502, "Insufficient reservation resources"}, | |
905 | {0x5503, "Insufficient resources"}, | |
906 | {0x5504, "Insufficient registration resources"}, | |
907 | {0x5505, "Insufficient access control resources"}, | |
908 | {0x5506, "Auxiliary memory out of space"}, | |
909 | {0x5507, "Quota error"}, | |
a507c6a2 | 910 | {0x5508, "Maximum number of supplemental decryption keys exceeded"}, |
b4567ca6 DG |
911 | {0x5509, "Medium auxiliary memory not accessible"}, |
912 | {0x550A, "Data currently unavailable"}, | |
1da177e4 LT |
913 | |
914 | {0x5700, "Unable to recover table-of-contents"}, | |
915 | ||
916 | {0x5800, "Generation does not exist"}, | |
917 | ||
918 | {0x5900, "Updated block read"}, | |
919 | ||
920 | {0x5A00, "Operator request or state change input"}, | |
921 | {0x5A01, "Operator medium removal request"}, | |
922 | {0x5A02, "Operator selected write protect"}, | |
923 | {0x5A03, "Operator selected write permit"}, | |
924 | ||
925 | {0x5B00, "Log exception"}, | |
926 | {0x5B01, "Threshold condition met"}, | |
927 | {0x5B02, "Log counter at maximum"}, | |
928 | {0x5B03, "Log list codes exhausted"}, | |
929 | ||
930 | {0x5C00, "Rpl status change"}, | |
931 | {0x5C01, "Spindles synchronized"}, | |
932 | {0x5C02, "Spindles not synchronized"}, | |
933 | ||
934 | {0x5D00, "Failure prediction threshold exceeded"}, | |
935 | {0x5D01, "Media failure prediction threshold exceeded"}, | |
936 | {0x5D02, "Logical unit failure prediction threshold exceeded"}, | |
937 | {0x5D03, "Spare area exhaustion prediction threshold exceeded"}, | |
938 | {0x5D10, "Hardware impending failure general hard drive failure"}, | |
939 | {0x5D11, "Hardware impending failure drive error rate too high"}, | |
940 | {0x5D12, "Hardware impending failure data error rate too high"}, | |
941 | {0x5D13, "Hardware impending failure seek error rate too high"}, | |
942 | {0x5D14, "Hardware impending failure too many block reassigns"}, | |
943 | {0x5D15, "Hardware impending failure access times too high"}, | |
944 | {0x5D16, "Hardware impending failure start unit times too high"}, | |
945 | {0x5D17, "Hardware impending failure channel parametrics"}, | |
946 | {0x5D18, "Hardware impending failure controller detected"}, | |
947 | {0x5D19, "Hardware impending failure throughput performance"}, | |
948 | {0x5D1A, "Hardware impending failure seek time performance"}, | |
949 | {0x5D1B, "Hardware impending failure spin-up retry count"}, | |
950 | {0x5D1C, "Hardware impending failure drive calibration retry count"}, | |
951 | {0x5D20, "Controller impending failure general hard drive failure"}, | |
952 | {0x5D21, "Controller impending failure drive error rate too high"}, | |
953 | {0x5D22, "Controller impending failure data error rate too high"}, | |
954 | {0x5D23, "Controller impending failure seek error rate too high"}, | |
955 | {0x5D24, "Controller impending failure too many block reassigns"}, | |
956 | {0x5D25, "Controller impending failure access times too high"}, | |
957 | {0x5D26, "Controller impending failure start unit times too high"}, | |
958 | {0x5D27, "Controller impending failure channel parametrics"}, | |
959 | {0x5D28, "Controller impending failure controller detected"}, | |
960 | {0x5D29, "Controller impending failure throughput performance"}, | |
961 | {0x5D2A, "Controller impending failure seek time performance"}, | |
962 | {0x5D2B, "Controller impending failure spin-up retry count"}, | |
963 | {0x5D2C, "Controller impending failure drive calibration retry count"}, | |
964 | {0x5D30, "Data channel impending failure general hard drive failure"}, | |
965 | {0x5D31, "Data channel impending failure drive error rate too high"}, | |
966 | {0x5D32, "Data channel impending failure data error rate too high"}, | |
967 | {0x5D33, "Data channel impending failure seek error rate too high"}, | |
968 | {0x5D34, "Data channel impending failure too many block reassigns"}, | |
969 | {0x5D35, "Data channel impending failure access times too high"}, | |
970 | {0x5D36, "Data channel impending failure start unit times too high"}, | |
971 | {0x5D37, "Data channel impending failure channel parametrics"}, | |
972 | {0x5D38, "Data channel impending failure controller detected"}, | |
973 | {0x5D39, "Data channel impending failure throughput performance"}, | |
974 | {0x5D3A, "Data channel impending failure seek time performance"}, | |
975 | {0x5D3B, "Data channel impending failure spin-up retry count"}, | |
976 | {0x5D3C, "Data channel impending failure drive calibration retry " | |
977 | "count"}, | |
978 | {0x5D40, "Servo impending failure general hard drive failure"}, | |
979 | {0x5D41, "Servo impending failure drive error rate too high"}, | |
980 | {0x5D42, "Servo impending failure data error rate too high"}, | |
981 | {0x5D43, "Servo impending failure seek error rate too high"}, | |
982 | {0x5D44, "Servo impending failure too many block reassigns"}, | |
983 | {0x5D45, "Servo impending failure access times too high"}, | |
984 | {0x5D46, "Servo impending failure start unit times too high"}, | |
985 | {0x5D47, "Servo impending failure channel parametrics"}, | |
986 | {0x5D48, "Servo impending failure controller detected"}, | |
987 | {0x5D49, "Servo impending failure throughput performance"}, | |
988 | {0x5D4A, "Servo impending failure seek time performance"}, | |
989 | {0x5D4B, "Servo impending failure spin-up retry count"}, | |
990 | {0x5D4C, "Servo impending failure drive calibration retry count"}, | |
991 | {0x5D50, "Spindle impending failure general hard drive failure"}, | |
992 | {0x5D51, "Spindle impending failure drive error rate too high"}, | |
993 | {0x5D52, "Spindle impending failure data error rate too high"}, | |
994 | {0x5D53, "Spindle impending failure seek error rate too high"}, | |
995 | {0x5D54, "Spindle impending failure too many block reassigns"}, | |
996 | {0x5D55, "Spindle impending failure access times too high"}, | |
997 | {0x5D56, "Spindle impending failure start unit times too high"}, | |
998 | {0x5D57, "Spindle impending failure channel parametrics"}, | |
999 | {0x5D58, "Spindle impending failure controller detected"}, | |
1000 | {0x5D59, "Spindle impending failure throughput performance"}, | |
1001 | {0x5D5A, "Spindle impending failure seek time performance"}, | |
1002 | {0x5D5B, "Spindle impending failure spin-up retry count"}, | |
1003 | {0x5D5C, "Spindle impending failure drive calibration retry count"}, | |
1004 | {0x5D60, "Firmware impending failure general hard drive failure"}, | |
1005 | {0x5D61, "Firmware impending failure drive error rate too high"}, | |
1006 | {0x5D62, "Firmware impending failure data error rate too high"}, | |
1007 | {0x5D63, "Firmware impending failure seek error rate too high"}, | |
1008 | {0x5D64, "Firmware impending failure too many block reassigns"}, | |
1009 | {0x5D65, "Firmware impending failure access times too high"}, | |
1010 | {0x5D66, "Firmware impending failure start unit times too high"}, | |
1011 | {0x5D67, "Firmware impending failure channel parametrics"}, | |
1012 | {0x5D68, "Firmware impending failure controller detected"}, | |
1013 | {0x5D69, "Firmware impending failure throughput performance"}, | |
1014 | {0x5D6A, "Firmware impending failure seek time performance"}, | |
1015 | {0x5D6B, "Firmware impending failure spin-up retry count"}, | |
1016 | {0x5D6C, "Firmware impending failure drive calibration retry count"}, | |
1017 | {0x5DFF, "Failure prediction threshold exceeded (false)"}, | |
1018 | ||
1019 | {0x5E00, "Low power condition on"}, | |
1020 | {0x5E01, "Idle condition activated by timer"}, | |
1021 | {0x5E02, "Standby condition activated by timer"}, | |
1022 | {0x5E03, "Idle condition activated by command"}, | |
1023 | {0x5E04, "Standby condition activated by command"}, | |
b4567ca6 DG |
1024 | {0x5E05, "Idle_b condition activated by timer"}, |
1025 | {0x5E06, "Idle_b condition activated by command"}, | |
1026 | {0x5E07, "Idle_c condition activated by timer"}, | |
1027 | {0x5E08, "Idle_c condition activated by command"}, | |
1028 | {0x5E09, "Standby_y condition activated by timer"}, | |
1029 | {0x5E0A, "Standby_y condition activated by command"}, | |
1da177e4 LT |
1030 | {0x5E41, "Power state change to active"}, |
1031 | {0x5E42, "Power state change to idle"}, | |
1032 | {0x5E43, "Power state change to standby"}, | |
1033 | {0x5E45, "Power state change to sleep"}, | |
1034 | {0x5E47, "Power state change to device control"}, | |
1035 | ||
1036 | {0x6000, "Lamp failure"}, | |
1037 | ||
1038 | {0x6100, "Video acquisition error"}, | |
1039 | {0x6101, "Unable to acquire video"}, | |
1040 | {0x6102, "Out of focus"}, | |
1041 | ||
1042 | {0x6200, "Scan head positioning error"}, | |
1043 | ||
1044 | {0x6300, "End of user area encountered on this track"}, | |
1045 | {0x6301, "Packet does not fit in available space"}, | |
1046 | ||
1047 | {0x6400, "Illegal mode for this track"}, | |
1048 | {0x6401, "Invalid packet size"}, | |
1049 | ||
1050 | {0x6500, "Voltage fault"}, | |
1051 | ||
1052 | {0x6600, "Automatic document feeder cover up"}, | |
1053 | {0x6601, "Automatic document feeder lift up"}, | |
1054 | {0x6602, "Document jam in automatic document feeder"}, | |
1055 | {0x6603, "Document miss feed automatic in document feeder"}, | |
1056 | ||
1057 | {0x6700, "Configuration failure"}, | |
1058 | {0x6701, "Configuration of incapable logical units failed"}, | |
1059 | {0x6702, "Add logical unit failed"}, | |
1060 | {0x6703, "Modification of logical unit failed"}, | |
1061 | {0x6704, "Exchange of logical unit failed"}, | |
1062 | {0x6705, "Remove of logical unit failed"}, | |
1063 | {0x6706, "Attachment of logical unit failed"}, | |
1064 | {0x6707, "Creation of logical unit failed"}, | |
1065 | {0x6708, "Assign failure occurred"}, | |
1066 | {0x6709, "Multiply assigned logical unit"}, | |
1067 | {0x670A, "Set target port groups command failed"}, | |
a507c6a2 | 1068 | {0x670B, "ATA device feature not enabled"}, |
1da177e4 LT |
1069 | |
1070 | {0x6800, "Logical unit not configured"}, | |
1071 | ||
1072 | {0x6900, "Data loss on logical unit"}, | |
1073 | {0x6901, "Multiple logical unit failures"}, | |
1074 | {0x6902, "Parity/data mismatch"}, | |
1075 | ||
1076 | {0x6A00, "Informational, refer to log"}, | |
1077 | ||
1078 | {0x6B00, "State change has occurred"}, | |
1079 | {0x6B01, "Redundancy level got better"}, | |
1080 | {0x6B02, "Redundancy level got worse"}, | |
1081 | ||
1082 | {0x6C00, "Rebuild failure occurred"}, | |
1083 | ||
1084 | {0x6D00, "Recalculate failure occurred"}, | |
1085 | ||
1086 | {0x6E00, "Command to logical unit failed"}, | |
1087 | ||
1088 | {0x6F00, "Copy protection key exchange failure - authentication " | |
1089 | "failure"}, | |
1090 | {0x6F01, "Copy protection key exchange failure - key not present"}, | |
1091 | {0x6F02, "Copy protection key exchange failure - key not established"}, | |
1092 | {0x6F03, "Read of scrambled sector without authentication"}, | |
1093 | {0x6F04, "Media region code is mismatched to logical unit region"}, | |
1094 | {0x6F05, "Drive region must be permanent/region reset count error"}, | |
a507c6a2 DG |
1095 | {0x6F06, "Insufficient block count for binding nonce recording"}, |
1096 | {0x6F07, "Conflict in binding nonce recording"}, | |
1da177e4 LT |
1097 | /* |
1098 | * {0x70NN, "Decompression exception short algorithm id of nn"}, | |
1099 | */ | |
1100 | {0x7100, "Decompression exception long algorithm id"}, | |
1101 | ||
1102 | {0x7200, "Session fixation error"}, | |
1103 | {0x7201, "Session fixation error writing lead-in"}, | |
1104 | {0x7202, "Session fixation error writing lead-out"}, | |
1105 | {0x7203, "Session fixation error - incomplete track in session"}, | |
1106 | {0x7204, "Empty or partially written reserved track"}, | |
1107 | {0x7205, "No more track reservations allowed"}, | |
a507c6a2 DG |
1108 | {0x7206, "RMZ extension is not allowed"}, |
1109 | {0x7207, "No more test zone extensions are allowed"}, | |
1da177e4 LT |
1110 | |
1111 | {0x7300, "Cd control error"}, | |
1112 | {0x7301, "Power calibration area almost full"}, | |
1113 | {0x7302, "Power calibration area is full"}, | |
1114 | {0x7303, "Power calibration area error"}, | |
1115 | {0x7304, "Program memory area update failure"}, | |
1116 | {0x7305, "Program memory area is full"}, | |
1117 | {0x7306, "RMA/PMA is almost full"}, | |
a507c6a2 DG |
1118 | {0x7310, "Current power calibration area almost full"}, |
1119 | {0x7311, "Current power calibration area is full"}, | |
1120 | {0x7317, "RDZ is full"}, | |
1121 | ||
1122 | {0x7400, "Security error"}, | |
1123 | {0x7401, "Unable to decrypt data"}, | |
1124 | {0x7402, "Unencrypted data encountered while decrypting"}, | |
1125 | {0x7403, "Incorrect data encryption key"}, | |
1126 | {0x7404, "Cryptographic integrity validation failed"}, | |
1127 | {0x7405, "Error decrypting data"}, | |
b4567ca6 DG |
1128 | {0x7406, "Unknown signature verification key"}, |
1129 | {0x7407, "Encryption parameters not useable"}, | |
1130 | {0x7408, "Digital signature validation failure"}, | |
1131 | {0x7409, "Encryption mode mismatch on read"}, | |
1132 | {0x740A, "Encrypted block not raw read enabled"}, | |
1133 | {0x740B, "Incorrect Encryption parameters"}, | |
1134 | {0x740C, "Unable to decrypt parameter list"}, | |
1135 | {0x740D, "Encryption algorithm disabled"}, | |
1136 | {0x7410, "SA creation parameter value invalid"}, | |
1137 | {0x7411, "SA creation parameter value rejected"}, | |
1138 | {0x7412, "Invalid SA usage"}, | |
1139 | {0x7421, "Data Encryption configuration prevented"}, | |
1140 | {0x7430, "SA creation parameter not supported"}, | |
1141 | {0x7440, "Authentication failed"}, | |
1142 | {0x7461, "External data encryption key manager access error"}, | |
1143 | {0x7462, "External data encryption key manager error"}, | |
1144 | {0x7463, "External data encryption key not found"}, | |
1145 | {0x7464, "External data encryption request not authorized"}, | |
1146 | {0x746E, "External data encryption control timeout"}, | |
1147 | {0x746F, "External data encryption control error"}, | |
a507c6a2 | 1148 | {0x7471, "Logical unit access not authorized"}, |
b4567ca6 | 1149 | {0x7479, "Security conflict in translated device"}, |
a507c6a2 | 1150 | |
1da177e4 LT |
1151 | {0, NULL} |
1152 | }; | |
1153 | ||
1154 | struct error_info2 { | |
1155 | unsigned char code1, code2_min, code2_max; | |
1156 | const char * fmt; | |
1157 | }; | |
1158 | ||
0ad78200 | 1159 | static const struct error_info2 additional2[] = |
1da177e4 | 1160 | { |
b4567ca6 DG |
1161 | {0x40, 0x00, 0x7f, "Ram failure (%x)"}, |
1162 | {0x40, 0x80, 0xff, "Diagnostic failure on component (%x)"}, | |
1163 | {0x41, 0x00, 0xff, "Data path failure (%x)"}, | |
1164 | {0x42, 0x00, 0xff, "Power-on or self-test failure (%x)"}, | |
1165 | {0x4D, 0x00, 0xff, "Tagged overlapped commands (task tag %x)"}, | |
1166 | {0x70, 0x00, 0xff, "Decompression exception short algorithm id of %x"}, | |
1da177e4 LT |
1167 | {0, 0, 0, NULL} |
1168 | }; | |
1169 | ||
1170 | /* description of the sense key values */ | |
0ad78200 | 1171 | static const char * const snstext[] = { |
1da177e4 LT |
1172 | "No Sense", /* 0: There is no sense information */ |
1173 | "Recovered Error", /* 1: The last command completed successfully | |
1174 | but used error correction */ | |
1175 | "Not Ready", /* 2: The addressed target is not ready */ | |
1176 | "Medium Error", /* 3: Data error detected on the medium */ | |
1177 | "Hardware Error", /* 4: Controller or device failure */ | |
1178 | "Illegal Request", /* 5: Error in request */ | |
1179 | "Unit Attention", /* 6: Removable medium was changed, or | |
1180 | the target has been reset, or ... */ | |
1181 | "Data Protect", /* 7: Access to the data is blocked */ | |
1182 | "Blank Check", /* 8: Reached unexpected written or unwritten | |
1183 | region of the medium */ | |
1184 | "Vendor Specific(9)", | |
1185 | "Copy Aborted", /* A: COPY or COMPARE was aborted */ | |
1186 | "Aborted Command", /* B: The target aborted the command */ | |
1187 | "Equal", /* C: A SEARCH DATA command found data equal */ | |
1188 | "Volume Overflow", /* D: Medium full with still data to be written */ | |
1189 | "Miscompare", /* E: Source data and data on the medium | |
1190 | do not agree */ | |
1191 | }; | |
1192 | #endif | |
1193 | ||
1194 | /* Get sense key string or NULL if not available */ | |
1195 | const char * | |
1196 | scsi_sense_key_string(unsigned char key) { | |
1197 | #ifdef CONFIG_SCSI_CONSTANTS | |
1198 | if (key <= 0xE) | |
1199 | return snstext[key]; | |
1200 | #endif | |
1201 | return NULL; | |
1202 | } | |
1203 | EXPORT_SYMBOL(scsi_sense_key_string); | |
1204 | ||
1205 | /* | |
1206 | * Get additional sense code string or NULL if not available. | |
1207 | * This string may contain a "%x" and should be printed with ascq as arg. | |
1208 | */ | |
1209 | const char * | |
1210 | scsi_extd_sense_format(unsigned char asc, unsigned char ascq) { | |
1211 | #ifdef CONFIG_SCSI_CONSTANTS | |
1212 | int i; | |
1213 | unsigned short code = ((asc << 8) | ascq); | |
1214 | ||
b4567ca6 | 1215 | for (i = 0; additional[i].text; i++) |
1da177e4 LT |
1216 | if (additional[i].code12 == code) |
1217 | return additional[i].text; | |
b4567ca6 | 1218 | for (i = 0; additional2[i].fmt; i++) { |
1da177e4 | 1219 | if (additional2[i].code1 == asc && |
b4567ca6 DG |
1220 | ascq >= additional2[i].code2_min && |
1221 | ascq <= additional2[i].code2_max) | |
1da177e4 | 1222 | return additional2[i].fmt; |
b4567ca6 | 1223 | } |
1da177e4 LT |
1224 | #endif |
1225 | return NULL; | |
1226 | } | |
1227 | EXPORT_SYMBOL(scsi_extd_sense_format); | |
1228 | ||
684b7fe9 | 1229 | void |
1da177e4 LT |
1230 | scsi_show_extd_sense(unsigned char asc, unsigned char ascq) |
1231 | { | |
684b7fe9 | 1232 | const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq); |
1da177e4 LT |
1233 | |
1234 | if (extd_sense_fmt) { | |
1235 | if (strstr(extd_sense_fmt, "%x")) { | |
684b7fe9 | 1236 | printk("Add. Sense: "); |
1da177e4 LT |
1237 | printk(extd_sense_fmt, ascq); |
1238 | } else | |
684b7fe9 | 1239 | printk("Add. Sense: %s", extd_sense_fmt); |
1da177e4 LT |
1240 | } else { |
1241 | if (asc >= 0x80) | |
684b7fe9 MP |
1242 | printk("<<vendor>> ASC=0x%x ASCQ=0x%x", asc, |
1243 | ascq); | |
1da177e4 | 1244 | if (ascq >= 0x80) |
684b7fe9 MP |
1245 | printk("ASC=0x%x <<vendor>> ASCQ=0x%x", asc, |
1246 | ascq); | |
1da177e4 LT |
1247 | else |
1248 | printk("ASC=0x%x ASCQ=0x%x", asc, ascq); | |
1249 | } | |
684b7fe9 MP |
1250 | |
1251 | printk("\n"); | |
1da177e4 | 1252 | } |
684b7fe9 | 1253 | EXPORT_SYMBOL(scsi_show_extd_sense); |
1da177e4 | 1254 | |
ea73a9f2 | 1255 | void |
684b7fe9 | 1256 | scsi_show_sense_hdr(struct scsi_sense_hdr *sshdr) |
ea73a9f2 JB |
1257 | { |
1258 | const char *sense_txt; | |
ea73a9f2 JB |
1259 | |
1260 | sense_txt = scsi_sense_key_string(sshdr->sense_key); | |
1261 | if (sense_txt) | |
684b7fe9 | 1262 | printk("Sense Key : %s ", sense_txt); |
ea73a9f2 | 1263 | else |
684b7fe9 MP |
1264 | printk("Sense Key : 0x%x ", sshdr->sense_key); |
1265 | ||
1266 | printk("%s", scsi_sense_is_deferred(sshdr) ? "[deferred] " : | |
1267 | "[current] "); | |
1268 | ||
1269 | if (sshdr->response_code >= 0x72) | |
1270 | printk("[descriptor]"); | |
1271 | ||
ea73a9f2 JB |
1272 | printk("\n"); |
1273 | } | |
684b7fe9 MP |
1274 | EXPORT_SYMBOL(scsi_show_sense_hdr); |
1275 | ||
1276 | /* | |
1277 | * Print normalized SCSI sense header with a prefix. | |
1278 | */ | |
1279 | void | |
1280 | scsi_print_sense_hdr(const char *name, struct scsi_sense_hdr *sshdr) | |
1281 | { | |
1282 | printk(KERN_INFO "%s: ", name); | |
1283 | scsi_show_sense_hdr(sshdr); | |
1284 | printk(KERN_INFO "%s: ", name); | |
1285 | scsi_show_extd_sense(sshdr->asc, sshdr->ascq); | |
1286 | } | |
ea73a9f2 JB |
1287 | EXPORT_SYMBOL(scsi_print_sense_hdr); |
1288 | ||
311b581e JB |
1289 | /* |
1290 | * Print normalized SCSI sense header with device information and a prefix. | |
1291 | */ | |
1292 | void | |
1293 | scsi_cmd_print_sense_hdr(struct scsi_cmnd *scmd, const char *desc, | |
1294 | struct scsi_sense_hdr *sshdr) | |
1295 | { | |
1296 | scmd_printk(KERN_INFO, scmd, "%s: ", desc); | |
1297 | scsi_show_sense_hdr(sshdr); | |
1298 | scmd_printk(KERN_INFO, scmd, "%s: ", desc); | |
1299 | scsi_show_extd_sense(sshdr->asc, sshdr->ascq); | |
1300 | } | |
1301 | EXPORT_SYMBOL(scsi_cmd_print_sense_hdr); | |
1302 | ||
8f8bf7e6 | 1303 | static void |
684b7fe9 MP |
1304 | scsi_decode_sense_buffer(const unsigned char *sense_buffer, int sense_len, |
1305 | struct scsi_sense_hdr *sshdr) | |
1da177e4 LT |
1306 | { |
1307 | int k, num, res; | |
1da177e4 | 1308 | |
684b7fe9 | 1309 | res = scsi_normalize_sense(sense_buffer, sense_len, sshdr); |
1da177e4 LT |
1310 | if (0 == res) { |
1311 | /* this may be SCSI-1 sense data */ | |
1312 | num = (sense_len < 32) ? sense_len : 32; | |
684b7fe9 | 1313 | printk("Unrecognized sense data (in hex):"); |
1da177e4 LT |
1314 | for (k = 0; k < num; ++k) { |
1315 | if (0 == (k % 16)) { | |
1316 | printk("\n"); | |
1317 | printk(KERN_INFO " "); | |
1318 | } | |
1319 | printk("%02x ", sense_buffer[k]); | |
1320 | } | |
1321 | printk("\n"); | |
1322 | return; | |
1323 | } | |
684b7fe9 MP |
1324 | } |
1325 | ||
8f8bf7e6 | 1326 | static void |
684b7fe9 MP |
1327 | scsi_decode_sense_extras(const unsigned char *sense_buffer, int sense_len, |
1328 | struct scsi_sense_hdr *sshdr) | |
1329 | { | |
1330 | int k, num, res; | |
1331 | ||
1332 | if (sshdr->response_code < 0x72) | |
1333 | { | |
1da177e4 LT |
1334 | /* only decode extras for "fixed" format now */ |
1335 | char buff[80]; | |
1336 | int blen, fixed_valid; | |
684b7fe9 | 1337 | unsigned int info; |
1da177e4 LT |
1338 | |
1339 | fixed_valid = sense_buffer[0] & 0x80; | |
1340 | info = ((sense_buffer[3] << 24) | (sense_buffer[4] << 16) | | |
1341 | (sense_buffer[5] << 8) | sense_buffer[6]); | |
1342 | res = 0; | |
1343 | memset(buff, 0, sizeof(buff)); | |
1344 | blen = sizeof(buff) - 1; | |
1345 | if (fixed_valid) | |
1346 | res += snprintf(buff + res, blen - res, | |
1347 | "Info fld=0x%x", info); | |
1348 | if (sense_buffer[2] & 0x80) { | |
1349 | /* current command has read a filemark */ | |
1350 | if (res > 0) | |
1351 | res += snprintf(buff + res, blen - res, ", "); | |
1352 | res += snprintf(buff + res, blen - res, "FMK"); | |
1353 | } | |
1354 | if (sense_buffer[2] & 0x40) { | |
1355 | /* end-of-medium condition exists */ | |
1356 | if (res > 0) | |
1357 | res += snprintf(buff + res, blen - res, ", "); | |
1358 | res += snprintf(buff + res, blen - res, "EOM"); | |
1359 | } | |
1360 | if (sense_buffer[2] & 0x20) { | |
1361 | /* incorrect block length requested */ | |
1362 | if (res > 0) | |
1363 | res += snprintf(buff + res, blen - res, ", "); | |
1364 | res += snprintf(buff + res, blen - res, "ILI"); | |
1365 | } | |
1366 | if (res > 0) | |
684b7fe9 MP |
1367 | printk("%s\n", buff); |
1368 | } else if (sshdr->additional_length > 0) { | |
1da177e4 | 1369 | /* descriptor format with sense descriptors */ |
684b7fe9 | 1370 | num = 8 + sshdr->additional_length; |
1da177e4 | 1371 | num = (sense_len < num) ? sense_len : num; |
684b7fe9 MP |
1372 | printk("Descriptor sense data with sense descriptors " |
1373 | "(in hex):"); | |
1da177e4 LT |
1374 | for (k = 0; k < num; ++k) { |
1375 | if (0 == (k % 16)) { | |
1376 | printk("\n"); | |
1377 | printk(KERN_INFO " "); | |
1378 | } | |
1379 | printk("%02x ", sense_buffer[k]); | |
1380 | } | |
684b7fe9 | 1381 | |
1da177e4 LT |
1382 | printk("\n"); |
1383 | } | |
684b7fe9 | 1384 | |
1da177e4 | 1385 | } |
1da177e4 | 1386 | |
684b7fe9 MP |
1387 | /* Normalize and print sense buffer with name prefix */ |
1388 | void __scsi_print_sense(const char *name, const unsigned char *sense_buffer, | |
1389 | int sense_len) | |
1da177e4 | 1390 | { |
684b7fe9 MP |
1391 | struct scsi_sense_hdr sshdr; |
1392 | ||
1393 | printk(KERN_INFO "%s: ", name); | |
1394 | scsi_decode_sense_buffer(sense_buffer, sense_len, &sshdr); | |
1395 | scsi_show_sense_hdr(&sshdr); | |
1396 | scsi_decode_sense_extras(sense_buffer, sense_len, &sshdr); | |
1397 | printk(KERN_INFO "%s: ", name); | |
1398 | scsi_show_extd_sense(sshdr.asc, sshdr.ascq); | |
1da177e4 | 1399 | } |
684b7fe9 | 1400 | EXPORT_SYMBOL(__scsi_print_sense); |
1da177e4 | 1401 | |
684b7fe9 MP |
1402 | /* Normalize and print sense buffer in SCSI command */ |
1403 | void scsi_print_sense(char *name, struct scsi_cmnd *cmd) | |
1da177e4 | 1404 | { |
684b7fe9 MP |
1405 | struct scsi_sense_hdr sshdr; |
1406 | ||
1407 | scmd_printk(KERN_INFO, cmd, ""); | |
1408 | scsi_decode_sense_buffer(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE, | |
1409 | &sshdr); | |
1410 | scsi_show_sense_hdr(&sshdr); | |
1411 | scsi_decode_sense_extras(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE, | |
1412 | &sshdr); | |
1413 | scmd_printk(KERN_INFO, cmd, ""); | |
1414 | scsi_show_extd_sense(sshdr.asc, sshdr.ascq); | |
1da177e4 | 1415 | } |
684b7fe9 | 1416 | EXPORT_SYMBOL(scsi_print_sense); |
1da177e4 LT |
1417 | |
1418 | #ifdef CONFIG_SCSI_CONSTANTS | |
1419 | ||
0ad78200 | 1420 | static const char * const hostbyte_table[]={ |
6391a113 | 1421 | "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET", |
1da177e4 | 1422 | "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR", |
a4dfaa6f MC |
1423 | "DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE", |
1424 | "DID_TRANSPORT_DISRUPTED", "DID_TRANSPORT_FAILFAST" }; | |
6391a113 | 1425 | #define NUM_HOSTBYTE_STRS ARRAY_SIZE(hostbyte_table) |
1da177e4 | 1426 | |
0ad78200 | 1427 | static const char * const driverbyte_table[]={ |
6391a113 | 1428 | "DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR", |
1da177e4 | 1429 | "DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"}; |
6391a113 | 1430 | #define NUM_DRIVERBYTE_STRS ARRAY_SIZE(driverbyte_table) |
1da177e4 | 1431 | |
684b7fe9 | 1432 | void scsi_show_result(int result) |
1da177e4 | 1433 | { |
684b7fe9 | 1434 | int hb = host_byte(result); |
1c9fbafc | 1435 | int db = driver_byte(result); |
1da177e4 | 1436 | |
1c9fbafc | 1437 | printk("Result: hostbyte=%s driverbyte=%s\n", |
684b7fe9 | 1438 | (hb < NUM_HOSTBYTE_STRS ? hostbyte_table[hb] : "invalid"), |
1c9fbafc | 1439 | (db < NUM_DRIVERBYTE_STRS ? driverbyte_table[db] : "invalid")); |
1da177e4 | 1440 | } |
684b7fe9 | 1441 | |
1da177e4 | 1442 | #else |
684b7fe9 MP |
1443 | |
1444 | void scsi_show_result(int result) | |
1da177e4 | 1445 | { |
684b7fe9 MP |
1446 | printk("Result: hostbyte=0x%02x driverbyte=0x%02x\n", |
1447 | host_byte(result), driver_byte(result)); | |
1da177e4 | 1448 | } |
684b7fe9 | 1449 | |
1da177e4 | 1450 | #endif |
684b7fe9 MP |
1451 | EXPORT_SYMBOL(scsi_show_result); |
1452 | ||
1453 | ||
1454 | void scsi_print_result(struct scsi_cmnd *cmd) | |
1455 | { | |
1456 | scmd_printk(KERN_INFO, cmd, ""); | |
1457 | scsi_show_result(cmd->result); | |
1458 | } | |
1459 | EXPORT_SYMBOL(scsi_print_result); | |
1460 | ||
1461 |