Commit | Line | Data |
---|---|---|
635374e7 EM |
1 | /* |
2 | * Scsi Host Layer for MPT (Message Passing Technology) based controllers | |
3 | * | |
4 | * This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c | |
31b7f2e2 | 5 | * Copyright (C) 2007-2010 LSI Corporation |
635374e7 EM |
6 | * (mailto:DL-MPTFusionLinux@lsi.com) |
7 | * | |
8 | * This program is free software; you can redistribute it and/or | |
9 | * modify it under the terms of the GNU General Public License | |
10 | * as published by the Free Software Foundation; either version 2 | |
11 | * of the License, or (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * NO WARRANTY | |
19 | * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR | |
20 | * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT | |
21 | * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, | |
22 | * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is | |
23 | * solely responsible for determining the appropriateness of using and | |
24 | * distributing the Program and assumes all risks associated with its | |
25 | * exercise of rights under this Agreement, including but not limited to | |
26 | * the risks and costs of program errors, damage to or loss of data, | |
27 | * programs or equipment, and unavailability or interruption of operations. | |
28 | ||
29 | * DISCLAIMER OF LIABILITY | |
30 | * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY | |
31 | * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
32 | * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND | |
33 | * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | |
34 | * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | |
35 | * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED | |
36 | * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES | |
37 | ||
38 | * You should have received a copy of the GNU General Public License | |
39 | * along with this program; if not, write to the Free Software | |
40 | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, | |
41 | * USA. | |
42 | */ | |
43 | ||
635374e7 EM |
44 | #include <linux/module.h> |
45 | #include <linux/kernel.h> | |
46 | #include <linux/init.h> | |
47 | #include <linux/errno.h> | |
48 | #include <linux/blkdev.h> | |
49 | #include <linux/sched.h> | |
50 | #include <linux/workqueue.h> | |
51 | #include <linux/delay.h> | |
52 | #include <linux/pci.h> | |
53 | #include <linux/interrupt.h> | |
ef7c80c1 | 54 | #include <linux/aer.h> |
f7c95ef0 | 55 | #include <linux/raid_class.h> |
5a0e3ad6 | 56 | #include <linux/slab.h> |
635374e7 EM |
57 | |
58 | #include "mpt2sas_base.h" | |
59 | ||
60 | MODULE_AUTHOR(MPT2SAS_AUTHOR); | |
61 | MODULE_DESCRIPTION(MPT2SAS_DESCRIPTION); | |
62 | MODULE_LICENSE("GPL"); | |
63 | MODULE_VERSION(MPT2SAS_DRIVER_VERSION); | |
64 | ||
65 | #define RAID_CHANNEL 1 | |
66 | ||
67 | /* forward proto's */ | |
68 | static void _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc, | |
69 | struct _sas_node *sas_expander); | |
70 | static void _firmware_event_work(struct work_struct *work); | |
71 | ||
f3eedd69 KD |
72 | static u8 _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid); |
73 | ||
921cd802 | 74 | static void _scsih_scan_start(struct Scsi_Host *shost); |
75 | static int _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time); | |
76 | ||
635374e7 | 77 | /* global parameters */ |
ba33fadf | 78 | LIST_HEAD(mpt2sas_ioc_list); |
635374e7 EM |
79 | |
80 | /* local parameters */ | |
635374e7 EM |
81 | static u8 scsi_io_cb_idx = -1; |
82 | static u8 tm_cb_idx = -1; | |
83 | static u8 ctl_cb_idx = -1; | |
84 | static u8 base_cb_idx = -1; | |
921cd802 | 85 | static u8 port_enable_cb_idx = -1; |
635374e7 | 86 | static u8 transport_cb_idx = -1; |
744090d3 | 87 | static u8 scsih_cb_idx = -1; |
635374e7 EM |
88 | static u8 config_cb_idx = -1; |
89 | static int mpt_ids; | |
90 | ||
77e63ed4 | 91 | static u8 tm_tr_cb_idx = -1 ; |
f3eedd69 | 92 | static u8 tm_tr_volume_cb_idx = -1 ; |
77e63ed4 KD |
93 | static u8 tm_sas_control_cb_idx = -1; |
94 | ||
635374e7 | 95 | /* command line options */ |
ba33fadf | 96 | static u32 logging_level; |
635374e7 EM |
97 | MODULE_PARM_DESC(logging_level, " bits for enabling additional logging info " |
98 | "(default=0)"); | |
99 | ||
a3e1e55e KD |
100 | static ushort max_sectors = 0xFFFF; |
101 | module_param(max_sectors, ushort, 0); | |
9ac49d3a | 102 | MODULE_PARM_DESC(max_sectors, "max sectors, range 64 to 32767 default=32767"); |
a3e1e55e | 103 | |
635374e7 EM |
104 | /* scsi-mid layer global parmeter is max_report_luns, which is 511 */ |
105 | #define MPT2SAS_MAX_LUN (16895) | |
106 | static int max_lun = MPT2SAS_MAX_LUN; | |
107 | module_param(max_lun, int, 0); | |
108 | MODULE_PARM_DESC(max_lun, " max lun, default=16895 "); | |
109 | ||
921cd802 | 110 | /* diag_buffer_enable is bitwise |
111 | * bit 0 set = TRACE | |
112 | * bit 1 set = SNAPSHOT | |
113 | * bit 2 set = EXTENDED | |
114 | * | |
115 | * Either bit can be set, or both | |
116 | */ | |
117 | static int diag_buffer_enable = -1; | |
118 | module_param(diag_buffer_enable, int, 0); | |
119 | MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers " | |
120 | "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)"); | |
121 | ||
635374e7 EM |
122 | /** |
123 | * struct sense_info - common structure for obtaining sense keys | |
124 | * @skey: sense key | |
125 | * @asc: additional sense code | |
126 | * @ascq: additional sense code qualifier | |
127 | */ | |
128 | struct sense_info { | |
129 | u8 skey; | |
130 | u8 asc; | |
131 | u8 ascq; | |
132 | }; | |
133 | ||
134 | ||
3ace8e05 | 135 | #define MPT2SAS_TURN_ON_FAULT_LED (0xFFFC) |
921cd802 | 136 | #define MPT2SAS_PORT_ENABLE_COMPLETE (0xFFFD) |
137 | #define MPT2SAS_REMOVE_UNRESPONDING_DEVICES (0xFFFF) | |
635374e7 EM |
138 | /** |
139 | * struct fw_event_work - firmware event struct | |
140 | * @list: link list framework | |
141 | * @work: work object (ioc->fault_reset_work_q) | |
f1c35e6a | 142 | * @cancel_pending_work: flag set during reset handling |
635374e7 | 143 | * @ioc: per adapter object |
3ace8e05 | 144 | * @device_handle: device handle |
635374e7 | 145 | * @VF_ID: virtual function id |
7b936b02 | 146 | * @VP_ID: virtual port id |
635374e7 EM |
147 | * @ignore: flag meaning this event has been marked to ignore |
148 | * @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h | |
149 | * @event_data: reply event data payload follows | |
150 | * | |
151 | * This object stored on ioc->fw_event_list. | |
152 | */ | |
153 | struct fw_event_work { | |
154 | struct list_head list; | |
f1c35e6a KD |
155 | u8 cancel_pending_work; |
156 | struct delayed_work delayed_work; | |
635374e7 | 157 | struct MPT2SAS_ADAPTER *ioc; |
3ace8e05 | 158 | u16 device_handle; |
635374e7 | 159 | u8 VF_ID; |
7b936b02 | 160 | u8 VP_ID; |
635374e7 EM |
161 | u8 ignore; |
162 | u16 event; | |
163 | void *event_data; | |
164 | }; | |
165 | ||
f7c95ef0 KD |
166 | /* raid transport support */ |
167 | static struct raid_template *mpt2sas_raid_template; | |
168 | ||
635374e7 EM |
169 | /** |
170 | * struct _scsi_io_transfer - scsi io transfer | |
171 | * @handle: sas device handle (assigned by firmware) | |
172 | * @is_raid: flag set for hidden raid components | |
173 | * @dir: DMA_TO_DEVICE, DMA_FROM_DEVICE, | |
174 | * @data_length: data transfer length | |
175 | * @data_dma: dma pointer to data | |
176 | * @sense: sense data | |
177 | * @lun: lun number | |
178 | * @cdb_length: cdb length | |
179 | * @cdb: cdb contents | |
635374e7 | 180 | * @timeout: timeout for this command |
7b936b02 KD |
181 | * @VF_ID: virtual function id |
182 | * @VP_ID: virtual port id | |
183 | * @valid_reply: flag set for reply message | |
635374e7 EM |
184 | * @sense_length: sense length |
185 | * @ioc_status: ioc status | |
186 | * @scsi_state: scsi state | |
187 | * @scsi_status: scsi staus | |
188 | * @log_info: log information | |
189 | * @transfer_length: data length transfer when there is a reply message | |
190 | * | |
191 | * Used for sending internal scsi commands to devices within this module. | |
192 | * Refer to _scsi_send_scsi_io(). | |
193 | */ | |
194 | struct _scsi_io_transfer { | |
195 | u16 handle; | |
196 | u8 is_raid; | |
197 | enum dma_data_direction dir; | |
198 | u32 data_length; | |
199 | dma_addr_t data_dma; | |
200 | u8 sense[SCSI_SENSE_BUFFERSIZE]; | |
201 | u32 lun; | |
202 | u8 cdb_length; | |
203 | u8 cdb[32]; | |
204 | u8 timeout; | |
7b936b02 KD |
205 | u8 VF_ID; |
206 | u8 VP_ID; | |
635374e7 EM |
207 | u8 valid_reply; |
208 | /* the following bits are only valid when 'valid_reply = 1' */ | |
209 | u32 sense_length; | |
210 | u16 ioc_status; | |
211 | u8 scsi_state; | |
212 | u8 scsi_status; | |
213 | u32 log_info; | |
214 | u32 transfer_length; | |
215 | }; | |
216 | ||
217 | /* | |
218 | * The pci device ids are defined in mpi/mpi2_cnfg.h. | |
219 | */ | |
220 | static struct pci_device_id scsih_pci_table[] = { | |
221 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004, | |
222 | PCI_ANY_ID, PCI_ANY_ID }, | |
223 | /* Falcon ~ 2008*/ | |
224 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008, | |
225 | PCI_ANY_ID, PCI_ANY_ID }, | |
226 | /* Liberator ~ 2108 */ | |
227 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1, | |
228 | PCI_ANY_ID, PCI_ANY_ID }, | |
229 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2, | |
230 | PCI_ANY_ID, PCI_ANY_ID }, | |
231 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3, | |
232 | PCI_ANY_ID, PCI_ANY_ID }, | |
db27136a | 233 | /* Meteor ~ 2116 */ |
635374e7 EM |
234 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1, |
235 | PCI_ANY_ID, PCI_ANY_ID }, | |
236 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2, | |
237 | PCI_ANY_ID, PCI_ANY_ID }, | |
db27136a KD |
238 | /* Thunderbolt ~ 2208 */ |
239 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_1, | |
240 | PCI_ANY_ID, PCI_ANY_ID }, | |
241 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_2, | |
242 | PCI_ANY_ID, PCI_ANY_ID }, | |
243 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_3, | |
244 | PCI_ANY_ID, PCI_ANY_ID }, | |
245 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_4, | |
246 | PCI_ANY_ID, PCI_ANY_ID }, | |
247 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_5, | |
248 | PCI_ANY_ID, PCI_ANY_ID }, | |
249 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6, | |
250 | PCI_ANY_ID, PCI_ANY_ID }, | |
203d65b1 KD |
251 | /* Mustang ~ 2308 */ |
252 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_1, | |
db27136a | 253 | PCI_ANY_ID, PCI_ANY_ID }, |
203d65b1 KD |
254 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_2, |
255 | PCI_ANY_ID, PCI_ANY_ID }, | |
256 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3, | |
db27136a | 257 | PCI_ANY_ID, PCI_ANY_ID }, |
0bdccdb0 KD |
258 | /* SSS6200 */ |
259 | { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SSS6200, | |
260 | PCI_ANY_ID, PCI_ANY_ID }, | |
635374e7 EM |
261 | {0} /* Terminating entry */ |
262 | }; | |
263 | MODULE_DEVICE_TABLE(pci, scsih_pci_table); | |
264 | ||
265 | /** | |
d5d135b3 | 266 | * _scsih_set_debug_level - global setting of ioc->logging_level. |
635374e7 EM |
267 | * |
268 | * Note: The logging levels are defined in mpt2sas_debug.h. | |
269 | */ | |
270 | static int | |
d5d135b3 | 271 | _scsih_set_debug_level(const char *val, struct kernel_param *kp) |
635374e7 EM |
272 | { |
273 | int ret = param_set_int(val, kp); | |
274 | struct MPT2SAS_ADAPTER *ioc; | |
275 | ||
276 | if (ret) | |
277 | return ret; | |
278 | ||
279 | printk(KERN_INFO "setting logging_level(0x%08x)\n", logging_level); | |
ba33fadf | 280 | list_for_each_entry(ioc, &mpt2sas_ioc_list, list) |
635374e7 EM |
281 | ioc->logging_level = logging_level; |
282 | return 0; | |
283 | } | |
d5d135b3 | 284 | module_param_call(logging_level, _scsih_set_debug_level, param_get_int, |
635374e7 EM |
285 | &logging_level, 0644); |
286 | ||
287 | /** | |
288 | * _scsih_srch_boot_sas_address - search based on sas_address | |
289 | * @sas_address: sas address | |
290 | * @boot_device: boot device object from bios page 2 | |
291 | * | |
292 | * Returns 1 when there's a match, 0 means no match. | |
293 | */ | |
294 | static inline int | |
295 | _scsih_srch_boot_sas_address(u64 sas_address, | |
296 | Mpi2BootDeviceSasWwid_t *boot_device) | |
297 | { | |
298 | return (sas_address == le64_to_cpu(boot_device->SASAddress)) ? 1 : 0; | |
299 | } | |
300 | ||
301 | /** | |
302 | * _scsih_srch_boot_device_name - search based on device name | |
303 | * @device_name: device name specified in INDENTIFY fram | |
304 | * @boot_device: boot device object from bios page 2 | |
305 | * | |
306 | * Returns 1 when there's a match, 0 means no match. | |
307 | */ | |
308 | static inline int | |
309 | _scsih_srch_boot_device_name(u64 device_name, | |
310 | Mpi2BootDeviceDeviceName_t *boot_device) | |
311 | { | |
312 | return (device_name == le64_to_cpu(boot_device->DeviceName)) ? 1 : 0; | |
313 | } | |
314 | ||
315 | /** | |
316 | * _scsih_srch_boot_encl_slot - search based on enclosure_logical_id/slot | |
317 | * @enclosure_logical_id: enclosure logical id | |
318 | * @slot_number: slot number | |
319 | * @boot_device: boot device object from bios page 2 | |
320 | * | |
321 | * Returns 1 when there's a match, 0 means no match. | |
322 | */ | |
323 | static inline int | |
324 | _scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number, | |
325 | Mpi2BootDeviceEnclosureSlot_t *boot_device) | |
326 | { | |
327 | return (enclosure_logical_id == le64_to_cpu(boot_device-> | |
328 | EnclosureLogicalID) && slot_number == le16_to_cpu(boot_device-> | |
329 | SlotNumber)) ? 1 : 0; | |
330 | } | |
331 | ||
332 | /** | |
333 | * _scsih_is_boot_device - search for matching boot device. | |
334 | * @sas_address: sas address | |
335 | * @device_name: device name specified in INDENTIFY fram | |
336 | * @enclosure_logical_id: enclosure logical id | |
337 | * @slot_number: slot number | |
338 | * @form: specifies boot device form | |
339 | * @boot_device: boot device object from bios page 2 | |
340 | * | |
341 | * Returns 1 when there's a match, 0 means no match. | |
342 | */ | |
343 | static int | |
344 | _scsih_is_boot_device(u64 sas_address, u64 device_name, | |
345 | u64 enclosure_logical_id, u16 slot, u8 form, | |
346 | Mpi2BiosPage2BootDevice_t *boot_device) | |
347 | { | |
348 | int rc = 0; | |
349 | ||
350 | switch (form) { | |
351 | case MPI2_BIOSPAGE2_FORM_SAS_WWID: | |
352 | if (!sas_address) | |
353 | break; | |
354 | rc = _scsih_srch_boot_sas_address( | |
355 | sas_address, &boot_device->SasWwid); | |
356 | break; | |
357 | case MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT: | |
358 | if (!enclosure_logical_id) | |
359 | break; | |
360 | rc = _scsih_srch_boot_encl_slot( | |
361 | enclosure_logical_id, | |
362 | slot, &boot_device->EnclosureSlot); | |
363 | break; | |
364 | case MPI2_BIOSPAGE2_FORM_DEVICE_NAME: | |
365 | if (!device_name) | |
366 | break; | |
367 | rc = _scsih_srch_boot_device_name( | |
368 | device_name, &boot_device->DeviceName); | |
369 | break; | |
370 | case MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED: | |
371 | break; | |
372 | } | |
373 | ||
374 | return rc; | |
375 | } | |
376 | ||
c5e039be KD |
377 | /** |
378 | * _scsih_get_sas_address - set the sas_address for given device handle | |
379 | * @handle: device handle | |
380 | * @sas_address: sas address | |
381 | * | |
382 | * Returns 0 success, non-zero when failure | |
383 | */ | |
384 | static int | |
385 | _scsih_get_sas_address(struct MPT2SAS_ADAPTER *ioc, u16 handle, | |
386 | u64 *sas_address) | |
387 | { | |
388 | Mpi2SasDevicePage0_t sas_device_pg0; | |
389 | Mpi2ConfigReply_t mpi_reply; | |
390 | u32 ioc_status; | |
24f09b59 | 391 | *sas_address = 0; |
c5e039be KD |
392 | |
393 | if (handle <= ioc->sas_hba.num_phys) { | |
394 | *sas_address = ioc->sas_hba.sas_address; | |
395 | return 0; | |
24f09b59 | 396 | } |
c5e039be KD |
397 | |
398 | if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, | |
399 | MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { | |
24f09b59 | 400 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, |
401 | __FILE__, __LINE__, __func__); | |
c5e039be KD |
402 | return -ENXIO; |
403 | } | |
404 | ||
24f09b59 | 405 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; |
406 | if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { | |
407 | *sas_address = le64_to_cpu(sas_device_pg0.SASAddress); | |
408 | return 0; | |
c5e039be KD |
409 | } |
410 | ||
24f09b59 | 411 | /* we hit this becuase the given parent handle doesn't exist */ |
412 | if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) | |
413 | return -ENXIO; | |
414 | /* else error case */ | |
415 | printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x), " | |
416 | "failure at %s:%d/%s()!\n", ioc->name, handle, ioc_status, | |
417 | __FILE__, __LINE__, __func__); | |
418 | return -EIO; | |
c5e039be KD |
419 | } |
420 | ||
635374e7 EM |
421 | /** |
422 | * _scsih_determine_boot_device - determine boot device. | |
423 | * @ioc: per adapter object | |
424 | * @device: either sas_device or raid_device object | |
425 | * @is_raid: [flag] 1 = raid object, 0 = sas object | |
426 | * | |
427 | * Determines whether this device should be first reported device to | |
25985edc | 428 | * to scsi-ml or sas transport, this purpose is for persistent boot device. |
635374e7 EM |
429 | * There are primary, alternate, and current entries in bios page 2. The order |
430 | * priority is primary, alternate, then current. This routine saves | |
431 | * the corresponding device object and is_raid flag in the ioc object. | |
432 | * The saved data to be used later in _scsih_probe_boot_devices(). | |
433 | */ | |
434 | static void | |
435 | _scsih_determine_boot_device(struct MPT2SAS_ADAPTER *ioc, | |
436 | void *device, u8 is_raid) | |
437 | { | |
438 | struct _sas_device *sas_device; | |
439 | struct _raid_device *raid_device; | |
440 | u64 sas_address; | |
441 | u64 device_name; | |
442 | u64 enclosure_logical_id; | |
443 | u16 slot; | |
444 | ||
445 | /* only process this function when driver loads */ | |
921cd802 | 446 | if (!ioc->is_driver_loading) |
447 | return; | |
448 | ||
449 | /* no Bios, return immediately */ | |
450 | if (!ioc->bios_pg3.BiosVersion) | |
635374e7 EM |
451 | return; |
452 | ||
453 | if (!is_raid) { | |
454 | sas_device = device; | |
455 | sas_address = sas_device->sas_address; | |
456 | device_name = sas_device->device_name; | |
457 | enclosure_logical_id = sas_device->enclosure_logical_id; | |
458 | slot = sas_device->slot; | |
459 | } else { | |
460 | raid_device = device; | |
461 | sas_address = raid_device->wwid; | |
462 | device_name = 0; | |
463 | enclosure_logical_id = 0; | |
464 | slot = 0; | |
465 | } | |
466 | ||
467 | if (!ioc->req_boot_device.device) { | |
468 | if (_scsih_is_boot_device(sas_address, device_name, | |
469 | enclosure_logical_id, slot, | |
470 | (ioc->bios_pg2.ReqBootDeviceForm & | |
471 | MPI2_BIOSPAGE2_FORM_MASK), | |
472 | &ioc->bios_pg2.RequestedBootDevice)) { | |
eabb08ad | 473 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT |
635374e7 EM |
474 | "%s: req_boot_device(0x%016llx)\n", |
475 | ioc->name, __func__, | |
476 | (unsigned long long)sas_address)); | |
477 | ioc->req_boot_device.device = device; | |
478 | ioc->req_boot_device.is_raid = is_raid; | |
479 | } | |
480 | } | |
481 | ||
482 | if (!ioc->req_alt_boot_device.device) { | |
483 | if (_scsih_is_boot_device(sas_address, device_name, | |
484 | enclosure_logical_id, slot, | |
485 | (ioc->bios_pg2.ReqAltBootDeviceForm & | |
486 | MPI2_BIOSPAGE2_FORM_MASK), | |
487 | &ioc->bios_pg2.RequestedAltBootDevice)) { | |
eabb08ad | 488 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT |
635374e7 EM |
489 | "%s: req_alt_boot_device(0x%016llx)\n", |
490 | ioc->name, __func__, | |
491 | (unsigned long long)sas_address)); | |
492 | ioc->req_alt_boot_device.device = device; | |
493 | ioc->req_alt_boot_device.is_raid = is_raid; | |
494 | } | |
495 | } | |
496 | ||
497 | if (!ioc->current_boot_device.device) { | |
498 | if (_scsih_is_boot_device(sas_address, device_name, | |
499 | enclosure_logical_id, slot, | |
500 | (ioc->bios_pg2.CurrentBootDeviceForm & | |
501 | MPI2_BIOSPAGE2_FORM_MASK), | |
502 | &ioc->bios_pg2.CurrentBootDevice)) { | |
eabb08ad | 503 | dinitprintk(ioc, printk(MPT2SAS_INFO_FMT |
635374e7 EM |
504 | "%s: current_boot_device(0x%016llx)\n", |
505 | ioc->name, __func__, | |
506 | (unsigned long long)sas_address)); | |
507 | ioc->current_boot_device.device = device; | |
508 | ioc->current_boot_device.is_raid = is_raid; | |
509 | } | |
510 | } | |
511 | } | |
512 | ||
513 | /** | |
514 | * mpt2sas_scsih_sas_device_find_by_sas_address - sas device search | |
515 | * @ioc: per adapter object | |
516 | * @sas_address: sas address | |
517 | * Context: Calling function should acquire ioc->sas_device_lock | |
518 | * | |
519 | * This searches for sas_device based on sas_address, then return sas_device | |
520 | * object. | |
521 | */ | |
522 | struct _sas_device * | |
523 | mpt2sas_scsih_sas_device_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc, | |
524 | u64 sas_address) | |
525 | { | |
cd9843f8 | 526 | struct _sas_device *sas_device; |
635374e7 | 527 | |
cd9843f8 KD |
528 | list_for_each_entry(sas_device, &ioc->sas_device_list, list) |
529 | if (sas_device->sas_address == sas_address) | |
530 | return sas_device; | |
531 | ||
532 | list_for_each_entry(sas_device, &ioc->sas_device_init_list, list) | |
533 | if (sas_device->sas_address == sas_address) | |
534 | return sas_device; | |
535 | ||
536 | return NULL; | |
635374e7 EM |
537 | } |
538 | ||
539 | /** | |
540 | * _scsih_sas_device_find_by_handle - sas device search | |
541 | * @ioc: per adapter object | |
542 | * @handle: sas device handle (assigned by firmware) | |
543 | * Context: Calling function should acquire ioc->sas_device_lock | |
544 | * | |
545 | * This searches for sas_device based on sas_address, then return sas_device | |
546 | * object. | |
547 | */ | |
548 | static struct _sas_device * | |
549 | _scsih_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) | |
550 | { | |
cd9843f8 KD |
551 | struct _sas_device *sas_device; |
552 | ||
553 | list_for_each_entry(sas_device, &ioc->sas_device_list, list) | |
554 | if (sas_device->handle == handle) | |
555 | return sas_device; | |
556 | ||
557 | list_for_each_entry(sas_device, &ioc->sas_device_init_list, list) | |
558 | if (sas_device->handle == handle) | |
559 | return sas_device; | |
635374e7 | 560 | |
cd9843f8 | 561 | return NULL; |
635374e7 EM |
562 | } |
563 | ||
564 | /** | |
565 | * _scsih_sas_device_remove - remove sas_device from list. | |
566 | * @ioc: per adapter object | |
567 | * @sas_device: the sas_device object | |
568 | * Context: This function will acquire ioc->sas_device_lock. | |
569 | * | |
570 | * Removing object and freeing associated memory from the ioc->sas_device_list. | |
571 | */ | |
572 | static void | |
573 | _scsih_sas_device_remove(struct MPT2SAS_ADAPTER *ioc, | |
574 | struct _sas_device *sas_device) | |
575 | { | |
576 | unsigned long flags; | |
577 | ||
980ead31 KD |
578 | if (!sas_device) |
579 | return; | |
580 | ||
635374e7 | 581 | spin_lock_irqsave(&ioc->sas_device_lock, flags); |
09da0b32 | 582 | list_del(&sas_device->list); |
583 | kfree(sas_device); | |
635374e7 EM |
584 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); |
585 | } | |
586 | ||
09da0b32 | 587 | |
635374e7 EM |
588 | /** |
589 | * _scsih_sas_device_add - insert sas_device to the list. | |
590 | * @ioc: per adapter object | |
591 | * @sas_device: the sas_device object | |
592 | * Context: This function will acquire ioc->sas_device_lock. | |
593 | * | |
594 | * Adding new object to the ioc->sas_device_list. | |
595 | */ | |
596 | static void | |
597 | _scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc, | |
598 | struct _sas_device *sas_device) | |
599 | { | |
600 | unsigned long flags; | |
635374e7 | 601 | |
eabb08ad | 602 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle" |
635374e7 EM |
603 | "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__, |
604 | sas_device->handle, (unsigned long long)sas_device->sas_address)); | |
605 | ||
606 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
607 | list_add_tail(&sas_device->list, &ioc->sas_device_list); | |
608 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
609 | ||
c5e039be | 610 | if (!mpt2sas_transport_port_add(ioc, sas_device->handle, |
35116db9 | 611 | sas_device->sas_address_parent)) { |
635374e7 | 612 | _scsih_sas_device_remove(ioc, sas_device); |
23edb6e7 | 613 | } else if (!sas_device->starget) { |
614 | /* When asyn scanning is enabled, its not possible to remove | |
615 | * devices while scanning is turned on due to an oops in | |
616 | * scsi_sysfs_add_sdev()->add_device()->sysfs_addrm_start() | |
617 | */ | |
618 | if (!ioc->is_driver_loading) | |
619 | mpt2sas_transport_port_remove(ioc, | |
620 | sas_device->sas_address, | |
621 | sas_device->sas_address_parent); | |
622 | _scsih_sas_device_remove(ioc, sas_device); | |
623 | } | |
635374e7 EM |
624 | } |
625 | ||
626 | /** | |
627 | * _scsih_sas_device_init_add - insert sas_device to the list. | |
628 | * @ioc: per adapter object | |
629 | * @sas_device: the sas_device object | |
630 | * Context: This function will acquire ioc->sas_device_lock. | |
631 | * | |
632 | * Adding new object at driver load time to the ioc->sas_device_init_list. | |
633 | */ | |
634 | static void | |
635 | _scsih_sas_device_init_add(struct MPT2SAS_ADAPTER *ioc, | |
636 | struct _sas_device *sas_device) | |
637 | { | |
638 | unsigned long flags; | |
639 | ||
eabb08ad | 640 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle" |
635374e7 EM |
641 | "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__, |
642 | sas_device->handle, (unsigned long long)sas_device->sas_address)); | |
643 | ||
644 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
645 | list_add_tail(&sas_device->list, &ioc->sas_device_init_list); | |
635374e7 | 646 | _scsih_determine_boot_device(ioc, sas_device, 0); |
09da0b32 | 647 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); |
635374e7 EM |
648 | } |
649 | ||
635374e7 EM |
650 | /** |
651 | * _scsih_raid_device_find_by_id - raid device search | |
652 | * @ioc: per adapter object | |
653 | * @id: sas device target id | |
654 | * @channel: sas device channel | |
655 | * Context: Calling function should acquire ioc->raid_device_lock | |
656 | * | |
657 | * This searches for raid_device based on target id, then return raid_device | |
658 | * object. | |
659 | */ | |
660 | static struct _raid_device * | |
661 | _scsih_raid_device_find_by_id(struct MPT2SAS_ADAPTER *ioc, int id, int channel) | |
662 | { | |
663 | struct _raid_device *raid_device, *r; | |
664 | ||
665 | r = NULL; | |
666 | list_for_each_entry(raid_device, &ioc->raid_device_list, list) { | |
667 | if (raid_device->id == id && raid_device->channel == channel) { | |
668 | r = raid_device; | |
669 | goto out; | |
670 | } | |
671 | } | |
672 | ||
673 | out: | |
674 | return r; | |
675 | } | |
676 | ||
677 | /** | |
678 | * _scsih_raid_device_find_by_handle - raid device search | |
679 | * @ioc: per adapter object | |
680 | * @handle: sas device handle (assigned by firmware) | |
681 | * Context: Calling function should acquire ioc->raid_device_lock | |
682 | * | |
683 | * This searches for raid_device based on handle, then return raid_device | |
684 | * object. | |
685 | */ | |
686 | static struct _raid_device * | |
687 | _scsih_raid_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) | |
688 | { | |
689 | struct _raid_device *raid_device, *r; | |
690 | ||
691 | r = NULL; | |
692 | list_for_each_entry(raid_device, &ioc->raid_device_list, list) { | |
693 | if (raid_device->handle != handle) | |
694 | continue; | |
695 | r = raid_device; | |
696 | goto out; | |
697 | } | |
698 | ||
699 | out: | |
700 | return r; | |
701 | } | |
702 | ||
703 | /** | |
704 | * _scsih_raid_device_find_by_wwid - raid device search | |
705 | * @ioc: per adapter object | |
706 | * @handle: sas device handle (assigned by firmware) | |
707 | * Context: Calling function should acquire ioc->raid_device_lock | |
708 | * | |
709 | * This searches for raid_device based on wwid, then return raid_device | |
710 | * object. | |
711 | */ | |
712 | static struct _raid_device * | |
713 | _scsih_raid_device_find_by_wwid(struct MPT2SAS_ADAPTER *ioc, u64 wwid) | |
714 | { | |
715 | struct _raid_device *raid_device, *r; | |
716 | ||
717 | r = NULL; | |
718 | list_for_each_entry(raid_device, &ioc->raid_device_list, list) { | |
719 | if (raid_device->wwid != wwid) | |
720 | continue; | |
721 | r = raid_device; | |
722 | goto out; | |
723 | } | |
724 | ||
725 | out: | |
726 | return r; | |
727 | } | |
728 | ||
729 | /** | |
730 | * _scsih_raid_device_add - add raid_device object | |
731 | * @ioc: per adapter object | |
732 | * @raid_device: raid_device object | |
733 | * | |
734 | * This is added to the raid_device_list link list. | |
735 | */ | |
736 | static void | |
737 | _scsih_raid_device_add(struct MPT2SAS_ADAPTER *ioc, | |
738 | struct _raid_device *raid_device) | |
739 | { | |
740 | unsigned long flags; | |
741 | ||
eabb08ad | 742 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle" |
635374e7 EM |
743 | "(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__, |
744 | raid_device->handle, (unsigned long long)raid_device->wwid)); | |
745 | ||
746 | spin_lock_irqsave(&ioc->raid_device_lock, flags); | |
747 | list_add_tail(&raid_device->list, &ioc->raid_device_list); | |
748 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); | |
749 | } | |
750 | ||
751 | /** | |
752 | * _scsih_raid_device_remove - delete raid_device object | |
753 | * @ioc: per adapter object | |
754 | * @raid_device: raid_device object | |
755 | * | |
635374e7 EM |
756 | */ |
757 | static void | |
758 | _scsih_raid_device_remove(struct MPT2SAS_ADAPTER *ioc, | |
759 | struct _raid_device *raid_device) | |
760 | { | |
761 | unsigned long flags; | |
762 | ||
763 | spin_lock_irqsave(&ioc->raid_device_lock, flags); | |
764 | list_del(&raid_device->list); | |
635374e7 EM |
765 | kfree(raid_device); |
766 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); | |
767 | } | |
768 | ||
c5e039be KD |
769 | /** |
770 | * mpt2sas_scsih_expander_find_by_handle - expander device search | |
771 | * @ioc: per adapter object | |
772 | * @handle: expander handle (assigned by firmware) | |
773 | * Context: Calling function should acquire ioc->sas_device_lock | |
774 | * | |
775 | * This searches for expander device based on handle, then returns the | |
776 | * sas_node object. | |
777 | */ | |
778 | struct _sas_node * | |
779 | mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) | |
780 | { | |
781 | struct _sas_node *sas_expander, *r; | |
782 | ||
783 | r = NULL; | |
784 | list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { | |
785 | if (sas_expander->handle != handle) | |
786 | continue; | |
787 | r = sas_expander; | |
788 | goto out; | |
789 | } | |
790 | out: | |
791 | return r; | |
792 | } | |
793 | ||
635374e7 EM |
794 | /** |
795 | * mpt2sas_scsih_expander_find_by_sas_address - expander device search | |
796 | * @ioc: per adapter object | |
797 | * @sas_address: sas address | |
798 | * Context: Calling function should acquire ioc->sas_node_lock. | |
799 | * | |
800 | * This searches for expander device based on sas_address, then returns the | |
801 | * sas_node object. | |
802 | */ | |
803 | struct _sas_node * | |
804 | mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc, | |
805 | u64 sas_address) | |
806 | { | |
807 | struct _sas_node *sas_expander, *r; | |
808 | ||
809 | r = NULL; | |
810 | list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { | |
811 | if (sas_expander->sas_address != sas_address) | |
812 | continue; | |
813 | r = sas_expander; | |
814 | goto out; | |
815 | } | |
816 | out: | |
817 | return r; | |
818 | } | |
819 | ||
820 | /** | |
821 | * _scsih_expander_node_add - insert expander device to the list. | |
822 | * @ioc: per adapter object | |
823 | * @sas_expander: the sas_device object | |
824 | * Context: This function will acquire ioc->sas_node_lock. | |
825 | * | |
826 | * Adding new object to the ioc->sas_expander_list. | |
827 | * | |
828 | * Return nothing. | |
829 | */ | |
830 | static void | |
831 | _scsih_expander_node_add(struct MPT2SAS_ADAPTER *ioc, | |
832 | struct _sas_node *sas_expander) | |
833 | { | |
834 | unsigned long flags; | |
835 | ||
836 | spin_lock_irqsave(&ioc->sas_node_lock, flags); | |
837 | list_add_tail(&sas_expander->list, &ioc->sas_expander_list); | |
838 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
839 | } | |
840 | ||
841 | /** | |
842 | * _scsih_is_end_device - determines if device is an end device | |
843 | * @device_info: bitfield providing information about the device. | |
844 | * Context: none | |
845 | * | |
846 | * Returns 1 if end device. | |
847 | */ | |
848 | static int | |
849 | _scsih_is_end_device(u32 device_info) | |
850 | { | |
851 | if (device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE && | |
852 | ((device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) | | |
853 | (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) | | |
854 | (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE))) | |
855 | return 1; | |
856 | else | |
857 | return 0; | |
858 | } | |
859 | ||
860 | /** | |
ec07a053 | 861 | * _scsih_scsi_lookup_get - returns scmd entry |
635374e7 EM |
862 | * @ioc: per adapter object |
863 | * @smid: system request message index | |
635374e7 EM |
864 | * |
865 | * Returns the smid stored scmd pointer. | |
866 | */ | |
867 | static struct scsi_cmnd * | |
868 | _scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid) | |
869 | { | |
595bb0bd | 870 | return ioc->scsi_lookup[smid - 1].scmd; |
635374e7 EM |
871 | } |
872 | ||
ec07a053 KD |
873 | /** |
874 | * _scsih_scsi_lookup_get_clear - returns scmd entry | |
875 | * @ioc: per adapter object | |
876 | * @smid: system request message index | |
877 | * | |
878 | * Returns the smid stored scmd pointer. | |
879 | * Then will derefrence the stored scmd pointer. | |
880 | */ | |
881 | static inline struct scsi_cmnd * | |
882 | _scsih_scsi_lookup_get_clear(struct MPT2SAS_ADAPTER *ioc, u16 smid) | |
883 | { | |
884 | unsigned long flags; | |
885 | struct scsi_cmnd *scmd; | |
886 | ||
887 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); | |
888 | scmd = ioc->scsi_lookup[smid - 1].scmd; | |
889 | ioc->scsi_lookup[smid - 1].scmd = NULL; | |
890 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); | |
891 | ||
892 | return scmd; | |
893 | } | |
894 | ||
635374e7 EM |
895 | /** |
896 | * _scsih_scsi_lookup_find_by_scmd - scmd lookup | |
897 | * @ioc: per adapter object | |
898 | * @smid: system request message index | |
899 | * @scmd: pointer to scsi command object | |
900 | * Context: This function will acquire ioc->scsi_lookup_lock. | |
901 | * | |
902 | * This will search for a scmd pointer in the scsi_lookup array, | |
903 | * returning the revelent smid. A returned value of zero means invalid. | |
904 | */ | |
905 | static u16 | |
906 | _scsih_scsi_lookup_find_by_scmd(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd | |
907 | *scmd) | |
908 | { | |
909 | u16 smid; | |
910 | unsigned long flags; | |
911 | int i; | |
912 | ||
913 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); | |
914 | smid = 0; | |
595bb0bd | 915 | for (i = 0; i < ioc->scsiio_depth; i++) { |
635374e7 | 916 | if (ioc->scsi_lookup[i].scmd == scmd) { |
595bb0bd | 917 | smid = ioc->scsi_lookup[i].smid; |
635374e7 EM |
918 | goto out; |
919 | } | |
920 | } | |
921 | out: | |
922 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); | |
923 | return smid; | |
924 | } | |
925 | ||
926 | /** | |
927 | * _scsih_scsi_lookup_find_by_target - search for matching channel:id | |
928 | * @ioc: per adapter object | |
929 | * @id: target id | |
930 | * @channel: channel | |
931 | * Context: This function will acquire ioc->scsi_lookup_lock. | |
932 | * | |
933 | * This will search for a matching channel:id in the scsi_lookup array, | |
934 | * returning 1 if found. | |
935 | */ | |
936 | static u8 | |
937 | _scsih_scsi_lookup_find_by_target(struct MPT2SAS_ADAPTER *ioc, int id, | |
938 | int channel) | |
939 | { | |
940 | u8 found; | |
941 | unsigned long flags; | |
942 | int i; | |
943 | ||
944 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); | |
945 | found = 0; | |
595bb0bd | 946 | for (i = 0 ; i < ioc->scsiio_depth; i++) { |
635374e7 EM |
947 | if (ioc->scsi_lookup[i].scmd && |
948 | (ioc->scsi_lookup[i].scmd->device->id == id && | |
949 | ioc->scsi_lookup[i].scmd->device->channel == channel)) { | |
950 | found = 1; | |
951 | goto out; | |
952 | } | |
953 | } | |
954 | out: | |
955 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); | |
956 | return found; | |
957 | } | |
958 | ||
993e0da7 EM |
959 | /** |
960 | * _scsih_scsi_lookup_find_by_lun - search for matching channel:id:lun | |
961 | * @ioc: per adapter object | |
962 | * @id: target id | |
963 | * @lun: lun number | |
964 | * @channel: channel | |
965 | * Context: This function will acquire ioc->scsi_lookup_lock. | |
966 | * | |
967 | * This will search for a matching channel:id:lun in the scsi_lookup array, | |
968 | * returning 1 if found. | |
969 | */ | |
970 | static u8 | |
971 | _scsih_scsi_lookup_find_by_lun(struct MPT2SAS_ADAPTER *ioc, int id, | |
972 | unsigned int lun, int channel) | |
973 | { | |
974 | u8 found; | |
975 | unsigned long flags; | |
976 | int i; | |
977 | ||
978 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); | |
979 | found = 0; | |
595bb0bd | 980 | for (i = 0 ; i < ioc->scsiio_depth; i++) { |
993e0da7 EM |
981 | if (ioc->scsi_lookup[i].scmd && |
982 | (ioc->scsi_lookup[i].scmd->device->id == id && | |
983 | ioc->scsi_lookup[i].scmd->device->channel == channel && | |
984 | ioc->scsi_lookup[i].scmd->device->lun == lun)) { | |
985 | found = 1; | |
986 | goto out; | |
987 | } | |
988 | } | |
989 | out: | |
990 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); | |
991 | return found; | |
992 | } | |
993 | ||
635374e7 | 994 | /** |
35f805b5 | 995 | * _scsih_get_chain_buffer_tracker - obtain chain tracker |
635374e7 | 996 | * @ioc: per adapter object |
35f805b5 | 997 | * @smid: smid associated to an IO request |
635374e7 | 998 | * |
35f805b5 | 999 | * Returns chain tracker(from ioc->free_chain_list) |
635374e7 | 1000 | */ |
35f805b5 KD |
1001 | static struct chain_tracker * |
1002 | _scsih_get_chain_buffer_tracker(struct MPT2SAS_ADAPTER *ioc, u16 smid) | |
635374e7 | 1003 | { |
35f805b5 KD |
1004 | struct chain_tracker *chain_req; |
1005 | unsigned long flags; | |
635374e7 | 1006 | |
35f805b5 KD |
1007 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
1008 | if (list_empty(&ioc->free_chain_list)) { | |
1009 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); | |
aff132d9 | 1010 | dfailprintk(ioc, printk(MPT2SAS_WARN_FMT "chain buffers not " |
1011 | "available\n", ioc->name)); | |
35f805b5 KD |
1012 | return NULL; |
1013 | } | |
1014 | chain_req = list_entry(ioc->free_chain_list.next, | |
1015 | struct chain_tracker, tracker_list); | |
1016 | list_del_init(&chain_req->tracker_list); | |
1017 | list_add_tail(&chain_req->tracker_list, | |
1018 | &ioc->scsi_lookup[smid - 1].chain_list); | |
1019 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); | |
1020 | return chain_req; | |
635374e7 EM |
1021 | } |
1022 | ||
1023 | /** | |
1024 | * _scsih_build_scatter_gather - main sg creation routine | |
1025 | * @ioc: per adapter object | |
1026 | * @scmd: scsi command | |
1027 | * @smid: system request message index | |
1028 | * Context: none. | |
1029 | * | |
1030 | * The main routine that builds scatter gather table from a given | |
1031 | * scsi request sent via the .queuecommand main handler. | |
1032 | * | |
1033 | * Returns 0 success, anything else error | |
1034 | */ | |
1035 | static int | |
1036 | _scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc, | |
1037 | struct scsi_cmnd *scmd, u16 smid) | |
1038 | { | |
1039 | Mpi2SCSIIORequest_t *mpi_request; | |
1040 | dma_addr_t chain_dma; | |
1041 | struct scatterlist *sg_scmd; | |
1042 | void *sg_local, *chain; | |
1043 | u32 chain_offset; | |
1044 | u32 chain_length; | |
1045 | u32 chain_flags; | |
bb789d01 | 1046 | int sges_left; |
635374e7 EM |
1047 | u32 sges_in_segment; |
1048 | u32 sgl_flags; | |
1049 | u32 sgl_flags_last_element; | |
1050 | u32 sgl_flags_end_buffer; | |
35f805b5 | 1051 | struct chain_tracker *chain_req; |
635374e7 EM |
1052 | |
1053 | mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); | |
1054 | ||
1055 | /* init scatter gather flags */ | |
1056 | sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT; | |
1057 | if (scmd->sc_data_direction == DMA_TO_DEVICE) | |
1058 | sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC; | |
1059 | sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT) | |
1060 | << MPI2_SGE_FLAGS_SHIFT; | |
1061 | sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT | | |
1062 | MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST) | |
1063 | << MPI2_SGE_FLAGS_SHIFT; | |
1064 | sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; | |
1065 | ||
1066 | sg_scmd = scsi_sglist(scmd); | |
1067 | sges_left = scsi_dma_map(scmd); | |
bb789d01 | 1068 | if (sges_left < 0) { |
635374e7 EM |
1069 | sdev_printk(KERN_ERR, scmd->device, "pci_map_sg" |
1070 | " failed: request for %d bytes!\n", scsi_bufflen(scmd)); | |
1071 | return -ENOMEM; | |
1072 | } | |
1073 | ||
1074 | sg_local = &mpi_request->SGL; | |
1075 | sges_in_segment = ioc->max_sges_in_main_message; | |
1076 | if (sges_left <= sges_in_segment) | |
1077 | goto fill_in_last_segment; | |
1078 | ||
1079 | mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) + | |
1080 | (sges_in_segment * ioc->sge_size))/4; | |
1081 | ||
1082 | /* fill in main message segment when there is a chain following */ | |
1083 | while (sges_in_segment) { | |
1084 | if (sges_in_segment == 1) | |
1085 | ioc->base_add_sg_single(sg_local, | |
1086 | sgl_flags_last_element | sg_dma_len(sg_scmd), | |
1087 | sg_dma_address(sg_scmd)); | |
1088 | else | |
1089 | ioc->base_add_sg_single(sg_local, sgl_flags | | |
1090 | sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); | |
1091 | sg_scmd = sg_next(sg_scmd); | |
1092 | sg_local += ioc->sge_size; | |
1093 | sges_left--; | |
1094 | sges_in_segment--; | |
1095 | } | |
1096 | ||
1097 | /* initializing the chain flags and pointers */ | |
1098 | chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT; | |
35f805b5 KD |
1099 | chain_req = _scsih_get_chain_buffer_tracker(ioc, smid); |
1100 | if (!chain_req) | |
1101 | return -1; | |
1102 | chain = chain_req->chain_buffer; | |
1103 | chain_dma = chain_req->chain_buffer_dma; | |
635374e7 EM |
1104 | do { |
1105 | sges_in_segment = (sges_left <= | |
1106 | ioc->max_sges_in_chain_message) ? sges_left : | |
1107 | ioc->max_sges_in_chain_message; | |
1108 | chain_offset = (sges_left == sges_in_segment) ? | |
1109 | 0 : (sges_in_segment * ioc->sge_size)/4; | |
1110 | chain_length = sges_in_segment * ioc->sge_size; | |
1111 | if (chain_offset) { | |
1112 | chain_offset = chain_offset << | |
1113 | MPI2_SGE_CHAIN_OFFSET_SHIFT; | |
1114 | chain_length += ioc->sge_size; | |
1115 | } | |
1116 | ioc->base_add_sg_single(sg_local, chain_flags | chain_offset | | |
1117 | chain_length, chain_dma); | |
1118 | sg_local = chain; | |
1119 | if (!chain_offset) | |
1120 | goto fill_in_last_segment; | |
1121 | ||
1122 | /* fill in chain segments */ | |
1123 | while (sges_in_segment) { | |
1124 | if (sges_in_segment == 1) | |
1125 | ioc->base_add_sg_single(sg_local, | |
1126 | sgl_flags_last_element | | |
1127 | sg_dma_len(sg_scmd), | |
1128 | sg_dma_address(sg_scmd)); | |
1129 | else | |
1130 | ioc->base_add_sg_single(sg_local, sgl_flags | | |
1131 | sg_dma_len(sg_scmd), | |
1132 | sg_dma_address(sg_scmd)); | |
1133 | sg_scmd = sg_next(sg_scmd); | |
1134 | sg_local += ioc->sge_size; | |
1135 | sges_left--; | |
1136 | sges_in_segment--; | |
1137 | } | |
1138 | ||
35f805b5 KD |
1139 | chain_req = _scsih_get_chain_buffer_tracker(ioc, smid); |
1140 | if (!chain_req) | |
1141 | return -1; | |
1142 | chain = chain_req->chain_buffer; | |
1143 | chain_dma = chain_req->chain_buffer_dma; | |
635374e7 EM |
1144 | } while (1); |
1145 | ||
1146 | ||
1147 | fill_in_last_segment: | |
1148 | ||
1149 | /* fill the last segment */ | |
1150 | while (sges_left) { | |
1151 | if (sges_left == 1) | |
1152 | ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer | | |
1153 | sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); | |
1154 | else | |
1155 | ioc->base_add_sg_single(sg_local, sgl_flags | | |
1156 | sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); | |
1157 | sg_scmd = sg_next(sg_scmd); | |
1158 | sg_local += ioc->sge_size; | |
1159 | sges_left--; | |
1160 | } | |
1161 | ||
1162 | return 0; | |
1163 | } | |
1164 | ||
1165 | /** | |
a93c6b45 | 1166 | * _scsih_adjust_queue_depth - setting device queue depth |
635374e7 EM |
1167 | * @sdev: scsi device struct |
1168 | * @qdepth: requested queue depth | |
1169 | * | |
a93c6b45 KD |
1170 | * |
1171 | * Returns nothing | |
635374e7 | 1172 | */ |
a93c6b45 KD |
1173 | static void |
1174 | _scsih_adjust_queue_depth(struct scsi_device *sdev, int qdepth) | |
635374e7 EM |
1175 | { |
1176 | struct Scsi_Host *shost = sdev->host; | |
1177 | int max_depth; | |
e0077d60 KD |
1178 | struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); |
1179 | struct MPT2SAS_DEVICE *sas_device_priv_data; | |
1180 | struct MPT2SAS_TARGET *sas_target_priv_data; | |
1181 | struct _sas_device *sas_device; | |
1182 | unsigned long flags; | |
635374e7 EM |
1183 | |
1184 | max_depth = shost->can_queue; | |
e0077d60 KD |
1185 | |
1186 | /* limit max device queue for SATA to 32 */ | |
1187 | sas_device_priv_data = sdev->hostdata; | |
1188 | if (!sas_device_priv_data) | |
1189 | goto not_sata; | |
1190 | sas_target_priv_data = sas_device_priv_data->sas_target; | |
1191 | if (!sas_target_priv_data) | |
1192 | goto not_sata; | |
1193 | if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) | |
1194 | goto not_sata; | |
1195 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
1196 | sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, | |
1197 | sas_device_priv_data->sas_target->sas_address); | |
e0077d60 KD |
1198 | if (sas_device && sas_device->device_info & |
1199 | MPI2_SAS_DEVICE_INFO_SATA_DEVICE) | |
1200 | max_depth = MPT2SAS_SATA_QUEUE_DEPTH; | |
09da0b32 | 1201 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); |
e0077d60 KD |
1202 | |
1203 | not_sata: | |
1204 | ||
635374e7 EM |
1205 | if (!sdev->tagged_supported) |
1206 | max_depth = 1; | |
1207 | if (qdepth > max_depth) | |
1208 | qdepth = max_depth; | |
a93c6b45 KD |
1209 | scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); |
1210 | } | |
1211 | ||
1212 | /** | |
1213 | * _scsih_change_queue_depth - setting device queue depth | |
1214 | * @sdev: scsi device struct | |
1215 | * @qdepth: requested queue depth | |
1216 | * @reason: SCSI_QDEPTH_DEFAULT/SCSI_QDEPTH_QFULL/SCSI_QDEPTH_RAMP_UP | |
1217 | * (see include/scsi/scsi_host.h for definition) | |
1218 | * | |
1219 | * Returns queue depth. | |
1220 | */ | |
1221 | static int | |
1222 | _scsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason) | |
1223 | { | |
1224 | if (reason == SCSI_QDEPTH_DEFAULT || reason == SCSI_QDEPTH_RAMP_UP) | |
1225 | _scsih_adjust_queue_depth(sdev, qdepth); | |
1226 | else if (reason == SCSI_QDEPTH_QFULL) | |
1227 | scsi_track_queue_full(sdev, qdepth); | |
1228 | else | |
1229 | return -EOPNOTSUPP; | |
635374e7 EM |
1230 | |
1231 | if (sdev->inquiry_len > 7) | |
1232 | sdev_printk(KERN_INFO, sdev, "qdepth(%d), tagged(%d), " | |
1233 | "simple(%d), ordered(%d), scsi_level(%d), cmd_que(%d)\n", | |
1234 | sdev->queue_depth, sdev->tagged_supported, sdev->simple_tags, | |
1235 | sdev->ordered_tags, sdev->scsi_level, | |
1236 | (sdev->inquiry[7] & 2) >> 1); | |
1237 | ||
1238 | return sdev->queue_depth; | |
1239 | } | |
1240 | ||
1241 | /** | |
595bb0bd | 1242 | * _scsih_change_queue_type - changing device queue tag type |
635374e7 EM |
1243 | * @sdev: scsi device struct |
1244 | * @tag_type: requested tag type | |
1245 | * | |
1246 | * Returns queue tag type. | |
1247 | */ | |
1248 | static int | |
d5d135b3 | 1249 | _scsih_change_queue_type(struct scsi_device *sdev, int tag_type) |
635374e7 EM |
1250 | { |
1251 | if (sdev->tagged_supported) { | |
1252 | scsi_set_tag_type(sdev, tag_type); | |
1253 | if (tag_type) | |
1254 | scsi_activate_tcq(sdev, sdev->queue_depth); | |
1255 | else | |
1256 | scsi_deactivate_tcq(sdev, sdev->queue_depth); | |
1257 | } else | |
1258 | tag_type = 0; | |
1259 | ||
1260 | return tag_type; | |
1261 | } | |
1262 | ||
1263 | /** | |
d5d135b3 | 1264 | * _scsih_target_alloc - target add routine |
635374e7 EM |
1265 | * @starget: scsi target struct |
1266 | * | |
1267 | * Returns 0 if ok. Any other return is assumed to be an error and | |
1268 | * the device is ignored. | |
1269 | */ | |
1270 | static int | |
d5d135b3 | 1271 | _scsih_target_alloc(struct scsi_target *starget) |
635374e7 EM |
1272 | { |
1273 | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | |
1274 | struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); | |
1275 | struct MPT2SAS_TARGET *sas_target_priv_data; | |
1276 | struct _sas_device *sas_device; | |
1277 | struct _raid_device *raid_device; | |
1278 | unsigned long flags; | |
1279 | struct sas_rphy *rphy; | |
1280 | ||
1281 | sas_target_priv_data = kzalloc(sizeof(struct scsi_target), GFP_KERNEL); | |
1282 | if (!sas_target_priv_data) | |
1283 | return -ENOMEM; | |
1284 | ||
1285 | starget->hostdata = sas_target_priv_data; | |
1286 | sas_target_priv_data->starget = starget; | |
1287 | sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE; | |
1288 | ||
1289 | /* RAID volumes */ | |
1290 | if (starget->channel == RAID_CHANNEL) { | |
1291 | spin_lock_irqsave(&ioc->raid_device_lock, flags); | |
1292 | raid_device = _scsih_raid_device_find_by_id(ioc, starget->id, | |
1293 | starget->channel); | |
1294 | if (raid_device) { | |
1295 | sas_target_priv_data->handle = raid_device->handle; | |
1296 | sas_target_priv_data->sas_address = raid_device->wwid; | |
1297 | sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME; | |
09da0b32 | 1298 | if (ioc->is_warpdrive) |
1299 | sas_target_priv_data->raid_device = raid_device; | |
635374e7 EM |
1300 | raid_device->starget = starget; |
1301 | } | |
1302 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); | |
1303 | return 0; | |
1304 | } | |
1305 | ||
1306 | /* sas/sata devices */ | |
1307 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
1308 | rphy = dev_to_rphy(starget->dev.parent); | |
1309 | sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, | |
1310 | rphy->identify.sas_address); | |
1311 | ||
1312 | if (sas_device) { | |
1313 | sas_target_priv_data->handle = sas_device->handle; | |
1314 | sas_target_priv_data->sas_address = sas_device->sas_address; | |
1315 | sas_device->starget = starget; | |
1316 | sas_device->id = starget->id; | |
1317 | sas_device->channel = starget->channel; | |
f3eedd69 | 1318 | if (test_bit(sas_device->handle, ioc->pd_handles)) |
635374e7 EM |
1319 | sas_target_priv_data->flags |= |
1320 | MPT_TARGET_FLAGS_RAID_COMPONENT; | |
1321 | } | |
1322 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
1323 | ||
1324 | return 0; | |
1325 | } | |
1326 | ||
1327 | /** | |
d5d135b3 | 1328 | * _scsih_target_destroy - target destroy routine |
635374e7 EM |
1329 | * @starget: scsi target struct |
1330 | * | |
1331 | * Returns nothing. | |
1332 | */ | |
1333 | static void | |
d5d135b3 | 1334 | _scsih_target_destroy(struct scsi_target *starget) |
635374e7 EM |
1335 | { |
1336 | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | |
1337 | struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); | |
1338 | struct MPT2SAS_TARGET *sas_target_priv_data; | |
1339 | struct _sas_device *sas_device; | |
1340 | struct _raid_device *raid_device; | |
1341 | unsigned long flags; | |
1342 | struct sas_rphy *rphy; | |
1343 | ||
1344 | sas_target_priv_data = starget->hostdata; | |
1345 | if (!sas_target_priv_data) | |
1346 | return; | |
1347 | ||
1348 | if (starget->channel == RAID_CHANNEL) { | |
1349 | spin_lock_irqsave(&ioc->raid_device_lock, flags); | |
1350 | raid_device = _scsih_raid_device_find_by_id(ioc, starget->id, | |
1351 | starget->channel); | |
1352 | if (raid_device) { | |
1353 | raid_device->starget = NULL; | |
1354 | raid_device->sdev = NULL; | |
1355 | } | |
1356 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); | |
1357 | goto out; | |
1358 | } | |
1359 | ||
1360 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
1361 | rphy = dev_to_rphy(starget->dev.parent); | |
1362 | sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, | |
1363 | rphy->identify.sas_address); | |
8901cbb4 EM |
1364 | if (sas_device && (sas_device->starget == starget) && |
1365 | (sas_device->id == starget->id) && | |
1366 | (sas_device->channel == starget->channel)) | |
635374e7 EM |
1367 | sas_device->starget = NULL; |
1368 | ||
1369 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
1370 | ||
1371 | out: | |
1372 | kfree(sas_target_priv_data); | |
1373 | starget->hostdata = NULL; | |
1374 | } | |
1375 | ||
1376 | /** | |
d5d135b3 | 1377 | * _scsih_slave_alloc - device add routine |
635374e7 EM |
1378 | * @sdev: scsi device struct |
1379 | * | |
1380 | * Returns 0 if ok. Any other return is assumed to be an error and | |
1381 | * the device is ignored. | |
1382 | */ | |
1383 | static int | |
d5d135b3 | 1384 | _scsih_slave_alloc(struct scsi_device *sdev) |
635374e7 EM |
1385 | { |
1386 | struct Scsi_Host *shost; | |
1387 | struct MPT2SAS_ADAPTER *ioc; | |
1388 | struct MPT2SAS_TARGET *sas_target_priv_data; | |
1389 | struct MPT2SAS_DEVICE *sas_device_priv_data; | |
1390 | struct scsi_target *starget; | |
1391 | struct _raid_device *raid_device; | |
635374e7 EM |
1392 | unsigned long flags; |
1393 | ||
1394 | sas_device_priv_data = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); | |
1395 | if (!sas_device_priv_data) | |
1396 | return -ENOMEM; | |
1397 | ||
1398 | sas_device_priv_data->lun = sdev->lun; | |
1399 | sas_device_priv_data->flags = MPT_DEVICE_FLAGS_INIT; | |
1400 | ||
1401 | starget = scsi_target(sdev); | |
1402 | sas_target_priv_data = starget->hostdata; | |
1403 | sas_target_priv_data->num_luns++; | |
1404 | sas_device_priv_data->sas_target = sas_target_priv_data; | |
1405 | sdev->hostdata = sas_device_priv_data; | |
1406 | if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT)) | |
1407 | sdev->no_uld_attach = 1; | |
1408 | ||
1409 | shost = dev_to_shost(&starget->dev); | |
1410 | ioc = shost_priv(shost); | |
1411 | if (starget->channel == RAID_CHANNEL) { | |
1412 | spin_lock_irqsave(&ioc->raid_device_lock, flags); | |
1413 | raid_device = _scsih_raid_device_find_by_id(ioc, | |
1414 | starget->id, starget->channel); | |
1415 | if (raid_device) | |
1416 | raid_device->sdev = sdev; /* raid is single lun */ | |
1417 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); | |
635374e7 EM |
1418 | } |
1419 | ||
635374e7 EM |
1420 | return 0; |
1421 | } | |
1422 | ||
1423 | /** | |
d5d135b3 | 1424 | * _scsih_slave_destroy - device destroy routine |
635374e7 EM |
1425 | * @sdev: scsi device struct |
1426 | * | |
1427 | * Returns nothing. | |
1428 | */ | |
1429 | static void | |
d5d135b3 | 1430 | _scsih_slave_destroy(struct scsi_device *sdev) |
635374e7 EM |
1431 | { |
1432 | struct MPT2SAS_TARGET *sas_target_priv_data; | |
1433 | struct scsi_target *starget; | |
35116db9 | 1434 | struct Scsi_Host *shost; |
1435 | struct MPT2SAS_ADAPTER *ioc; | |
1436 | struct _sas_device *sas_device; | |
1437 | unsigned long flags; | |
635374e7 EM |
1438 | |
1439 | if (!sdev->hostdata) | |
1440 | return; | |
1441 | ||
1442 | starget = scsi_target(sdev); | |
1443 | sas_target_priv_data = starget->hostdata; | |
1444 | sas_target_priv_data->num_luns--; | |
35116db9 | 1445 | |
1446 | shost = dev_to_shost(&starget->dev); | |
1447 | ioc = shost_priv(shost); | |
1448 | ||
1449 | if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) { | |
1450 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
1451 | sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, | |
1452 | sas_target_priv_data->sas_address); | |
23edb6e7 | 1453 | if (sas_device && !sas_target_priv_data->num_luns) |
35116db9 | 1454 | sas_device->starget = NULL; |
1455 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
1456 | } | |
1457 | ||
635374e7 EM |
1458 | kfree(sdev->hostdata); |
1459 | sdev->hostdata = NULL; | |
1460 | } | |
1461 | ||
1462 | /** | |
d5d135b3 | 1463 | * _scsih_display_sata_capabilities - sata capabilities |
635374e7 | 1464 | * @ioc: per adapter object |
09da0b32 | 1465 | * @handle: device handle |
635374e7 EM |
1466 | * @sdev: scsi device struct |
1467 | */ | |
1468 | static void | |
d5d135b3 | 1469 | _scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc, |
09da0b32 | 1470 | u16 handle, struct scsi_device *sdev) |
635374e7 EM |
1471 | { |
1472 | Mpi2ConfigReply_t mpi_reply; | |
1473 | Mpi2SasDevicePage0_t sas_device_pg0; | |
1474 | u32 ioc_status; | |
1475 | u16 flags; | |
1476 | u32 device_info; | |
1477 | ||
1478 | if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, | |
09da0b32 | 1479 | MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { |
635374e7 EM |
1480 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", |
1481 | ioc->name, __FILE__, __LINE__, __func__); | |
1482 | return; | |
1483 | } | |
1484 | ||
1485 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
1486 | MPI2_IOCSTATUS_MASK; | |
1487 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { | |
1488 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
1489 | ioc->name, __FILE__, __LINE__, __func__); | |
1490 | return; | |
1491 | } | |
1492 | ||
1493 | flags = le16_to_cpu(sas_device_pg0.Flags); | |
e94f6747 | 1494 | device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); |
635374e7 EM |
1495 | |
1496 | sdev_printk(KERN_INFO, sdev, | |
1497 | "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), " | |
1498 | "sw_preserve(%s)\n", | |
1499 | (device_info & MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? "y" : "n", | |
1500 | (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED) ? "y" : "n", | |
1501 | (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY) ? "y" : | |
1502 | "n", | |
1503 | (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED) ? "y" : "n", | |
1504 | (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED) ? "y" : "n", | |
1505 | (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE) ? "y" : "n"); | |
1506 | } | |
1507 | ||
f7c95ef0 KD |
1508 | /** |
1509 | * _scsih_is_raid - return boolean indicating device is raid volume | |
1510 | * @dev the device struct object | |
1511 | */ | |
1512 | static int | |
1513 | _scsih_is_raid(struct device *dev) | |
1514 | { | |
1515 | struct scsi_device *sdev = to_scsi_device(dev); | |
0bdccdb0 | 1516 | struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host); |
f7c95ef0 | 1517 | |
0bdccdb0 KD |
1518 | if (ioc->is_warpdrive) |
1519 | return 0; | |
f7c95ef0 KD |
1520 | return (sdev->channel == RAID_CHANNEL) ? 1 : 0; |
1521 | } | |
1522 | ||
1523 | /** | |
1524 | * _scsih_get_resync - get raid volume resync percent complete | |
1525 | * @dev the device struct object | |
1526 | */ | |
1527 | static void | |
1528 | _scsih_get_resync(struct device *dev) | |
1529 | { | |
1530 | struct scsi_device *sdev = to_scsi_device(dev); | |
1531 | struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host); | |
1532 | static struct _raid_device *raid_device; | |
1533 | unsigned long flags; | |
1534 | Mpi2RaidVolPage0_t vol_pg0; | |
1535 | Mpi2ConfigReply_t mpi_reply; | |
1536 | u32 volume_status_flags; | |
09da0b32 | 1537 | u8 percent_complete; |
1538 | u16 handle; | |
1539 | ||
1540 | percent_complete = 0; | |
1541 | handle = 0; | |
1542 | if (ioc->is_warpdrive) | |
1543 | goto out; | |
f7c95ef0 KD |
1544 | |
1545 | spin_lock_irqsave(&ioc->raid_device_lock, flags); | |
1546 | raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id, | |
1547 | sdev->channel); | |
09da0b32 | 1548 | if (raid_device) { |
1549 | handle = raid_device->handle; | |
1550 | percent_complete = raid_device->percent_complete; | |
1551 | } | |
f7c95ef0 KD |
1552 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); |
1553 | ||
09da0b32 | 1554 | if (!handle) |
f7c95ef0 KD |
1555 | goto out; |
1556 | ||
1557 | if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0, | |
09da0b32 | 1558 | MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle, |
f7c95ef0 KD |
1559 | sizeof(Mpi2RaidVolPage0_t))) { |
1560 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
1561 | ioc->name, __FILE__, __LINE__, __func__); | |
09da0b32 | 1562 | percent_complete = 0; |
f7c95ef0 KD |
1563 | goto out; |
1564 | } | |
1565 | ||
1566 | volume_status_flags = le32_to_cpu(vol_pg0.VolumeStatusFlags); | |
09da0b32 | 1567 | if (!(volume_status_flags & |
1568 | MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS)) | |
1569 | percent_complete = 0; | |
1570 | ||
f7c95ef0 KD |
1571 | out: |
1572 | raid_set_resync(mpt2sas_raid_template, dev, percent_complete); | |
1573 | } | |
1574 | ||
1575 | /** | |
1576 | * _scsih_get_state - get raid volume level | |
1577 | * @dev the device struct object | |
1578 | */ | |
1579 | static void | |
1580 | _scsih_get_state(struct device *dev) | |
1581 | { | |
1582 | struct scsi_device *sdev = to_scsi_device(dev); | |
1583 | struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host); | |
1584 | static struct _raid_device *raid_device; | |
1585 | unsigned long flags; | |
1586 | Mpi2RaidVolPage0_t vol_pg0; | |
1587 | Mpi2ConfigReply_t mpi_reply; | |
1588 | u32 volstate; | |
1589 | enum raid_state state = RAID_STATE_UNKNOWN; | |
09da0b32 | 1590 | u16 handle = 0; |
f7c95ef0 KD |
1591 | |
1592 | spin_lock_irqsave(&ioc->raid_device_lock, flags); | |
1593 | raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id, | |
1594 | sdev->channel); | |
09da0b32 | 1595 | if (raid_device) |
1596 | handle = raid_device->handle; | |
f7c95ef0 KD |
1597 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); |
1598 | ||
1599 | if (!raid_device) | |
1600 | goto out; | |
1601 | ||
1602 | if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0, | |
09da0b32 | 1603 | MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle, |
f7c95ef0 KD |
1604 | sizeof(Mpi2RaidVolPage0_t))) { |
1605 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
1606 | ioc->name, __FILE__, __LINE__, __func__); | |
1607 | goto out; | |
1608 | } | |
1609 | ||
1610 | volstate = le32_to_cpu(vol_pg0.VolumeStatusFlags); | |
1611 | if (volstate & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) { | |
1612 | state = RAID_STATE_RESYNCING; | |
1613 | goto out; | |
1614 | } | |
1615 | ||
1616 | switch (vol_pg0.VolumeState) { | |
1617 | case MPI2_RAID_VOL_STATE_OPTIMAL: | |
1618 | case MPI2_RAID_VOL_STATE_ONLINE: | |
1619 | state = RAID_STATE_ACTIVE; | |
1620 | break; | |
1621 | case MPI2_RAID_VOL_STATE_DEGRADED: | |
1622 | state = RAID_STATE_DEGRADED; | |
1623 | break; | |
1624 | case MPI2_RAID_VOL_STATE_FAILED: | |
1625 | case MPI2_RAID_VOL_STATE_MISSING: | |
1626 | state = RAID_STATE_OFFLINE; | |
1627 | break; | |
1628 | } | |
1629 | out: | |
1630 | raid_set_state(mpt2sas_raid_template, dev, state); | |
1631 | } | |
1632 | ||
1633 | /** | |
1634 | * _scsih_set_level - set raid level | |
1635 | * @sdev: scsi device struct | |
09da0b32 | 1636 | * @volume_type: volume type |
f7c95ef0 KD |
1637 | */ |
1638 | static void | |
09da0b32 | 1639 | _scsih_set_level(struct scsi_device *sdev, u8 volume_type) |
f7c95ef0 KD |
1640 | { |
1641 | enum raid_level level = RAID_LEVEL_UNKNOWN; | |
1642 | ||
09da0b32 | 1643 | switch (volume_type) { |
f7c95ef0 KD |
1644 | case MPI2_RAID_VOL_TYPE_RAID0: |
1645 | level = RAID_LEVEL_0; | |
1646 | break; | |
1647 | case MPI2_RAID_VOL_TYPE_RAID10: | |
1648 | level = RAID_LEVEL_10; | |
1649 | break; | |
1650 | case MPI2_RAID_VOL_TYPE_RAID1E: | |
1651 | level = RAID_LEVEL_1E; | |
1652 | break; | |
1653 | case MPI2_RAID_VOL_TYPE_RAID1: | |
1654 | level = RAID_LEVEL_1; | |
1655 | break; | |
1656 | } | |
1657 | ||
1658 | raid_set_level(mpt2sas_raid_template, &sdev->sdev_gendev, level); | |
1659 | } | |
1660 | ||
635374e7 EM |
1661 | /** |
1662 | * _scsih_get_volume_capabilities - volume capabilities | |
1663 | * @ioc: per adapter object | |
1664 | * @sas_device: the raid_device object | |
6faace2a | 1665 | * |
1666 | * Returns 0 for success, else 1 | |
635374e7 | 1667 | */ |
6faace2a | 1668 | static int |
635374e7 EM |
1669 | _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc, |
1670 | struct _raid_device *raid_device) | |
1671 | { | |
1672 | Mpi2RaidVolPage0_t *vol_pg0; | |
1673 | Mpi2RaidPhysDiskPage0_t pd_pg0; | |
1674 | Mpi2SasDevicePage0_t sas_device_pg0; | |
1675 | Mpi2ConfigReply_t mpi_reply; | |
1676 | u16 sz; | |
1677 | u8 num_pds; | |
1678 | ||
1679 | if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle, | |
1680 | &num_pds)) || !num_pds) { | |
6faace2a | 1681 | dfailprintk(ioc, printk(MPT2SAS_WARN_FMT |
1682 | "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, | |
1683 | __func__)); | |
1684 | return 1; | |
635374e7 EM |
1685 | } |
1686 | ||
1687 | raid_device->num_pds = num_pds; | |
1688 | sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds * | |
1689 | sizeof(Mpi2RaidVol0PhysDisk_t)); | |
1690 | vol_pg0 = kzalloc(sz, GFP_KERNEL); | |
1691 | if (!vol_pg0) { | |
6faace2a | 1692 | dfailprintk(ioc, printk(MPT2SAS_WARN_FMT |
1693 | "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, | |
1694 | __func__)); | |
1695 | return 1; | |
635374e7 EM |
1696 | } |
1697 | ||
1698 | if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0, | |
1699 | MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) { | |
6faace2a | 1700 | dfailprintk(ioc, printk(MPT2SAS_WARN_FMT |
1701 | "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, | |
1702 | __func__)); | |
635374e7 | 1703 | kfree(vol_pg0); |
6faace2a | 1704 | return 1; |
635374e7 EM |
1705 | } |
1706 | ||
1707 | raid_device->volume_type = vol_pg0->VolumeType; | |
1708 | ||
1709 | /* figure out what the underlying devices are by | |
1710 | * obtaining the device_info bits for the 1st device | |
1711 | */ | |
1712 | if (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply, | |
1713 | &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM, | |
1714 | vol_pg0->PhysDisk[0].PhysDiskNum))) { | |
1715 | if (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, | |
1716 | &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, | |
1717 | le16_to_cpu(pd_pg0.DevHandle)))) { | |
1718 | raid_device->device_info = | |
1719 | le32_to_cpu(sas_device_pg0.DeviceInfo); | |
1720 | } | |
1721 | } | |
1722 | ||
1723 | kfree(vol_pg0); | |
6faace2a | 1724 | return 0; |
635374e7 | 1725 | } |
0bdccdb0 KD |
1726 | /** |
1727 | * _scsih_disable_ddio - Disable direct I/O for all the volumes | |
1728 | * @ioc: per adapter object | |
1729 | */ | |
1730 | static void | |
1731 | _scsih_disable_ddio(struct MPT2SAS_ADAPTER *ioc) | |
1732 | { | |
1733 | Mpi2RaidVolPage1_t vol_pg1; | |
1734 | Mpi2ConfigReply_t mpi_reply; | |
1735 | struct _raid_device *raid_device; | |
1736 | u16 handle; | |
1737 | u16 ioc_status; | |
09da0b32 | 1738 | unsigned long flags; |
0bdccdb0 KD |
1739 | |
1740 | handle = 0xFFFF; | |
1741 | while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, | |
1742 | &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { | |
1743 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
1744 | MPI2_IOCSTATUS_MASK; | |
1745 | if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) | |
1746 | break; | |
1747 | handle = le16_to_cpu(vol_pg1.DevHandle); | |
09da0b32 | 1748 | spin_lock_irqsave(&ioc->raid_device_lock, flags); |
0bdccdb0 KD |
1749 | raid_device = _scsih_raid_device_find_by_handle(ioc, handle); |
1750 | if (raid_device) | |
1751 | raid_device->direct_io_enabled = 0; | |
09da0b32 | 1752 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); |
0bdccdb0 KD |
1753 | } |
1754 | return; | |
1755 | } | |
1756 | ||
1757 | ||
1758 | /** | |
1759 | * _scsih_get_num_volumes - Get number of volumes in the ioc | |
1760 | * @ioc: per adapter object | |
1761 | */ | |
1762 | static u8 | |
1763 | _scsih_get_num_volumes(struct MPT2SAS_ADAPTER *ioc) | |
1764 | { | |
1765 | Mpi2RaidVolPage1_t vol_pg1; | |
1766 | Mpi2ConfigReply_t mpi_reply; | |
1767 | u16 handle; | |
1768 | u8 vol_cnt = 0; | |
1769 | u16 ioc_status; | |
1770 | ||
1771 | handle = 0xFFFF; | |
1772 | while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, | |
1773 | &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { | |
1774 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
1775 | MPI2_IOCSTATUS_MASK; | |
1776 | if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) | |
1777 | break; | |
1778 | vol_cnt++; | |
1779 | handle = le16_to_cpu(vol_pg1.DevHandle); | |
1780 | } | |
1781 | return vol_cnt; | |
1782 | } | |
1783 | ||
1784 | ||
1785 | /** | |
1786 | * _scsih_init_warpdrive_properties - Set properties for warpdrive direct I/O. | |
1787 | * @ioc: per adapter object | |
1788 | * @raid_device: the raid_device object | |
1789 | */ | |
1790 | static void | |
1791 | _scsih_init_warpdrive_properties(struct MPT2SAS_ADAPTER *ioc, | |
1792 | struct _raid_device *raid_device) | |
1793 | { | |
1794 | Mpi2RaidVolPage0_t *vol_pg0; | |
1795 | Mpi2RaidPhysDiskPage0_t pd_pg0; | |
1796 | Mpi2ConfigReply_t mpi_reply; | |
1797 | u16 sz; | |
1798 | u8 num_pds, count; | |
ba96bd0b | 1799 | unsigned long stripe_sz, block_sz; |
1800 | u8 stripe_exp, block_exp; | |
1801 | u64 dev_max_lba; | |
0bdccdb0 KD |
1802 | |
1803 | if (!ioc->is_warpdrive) | |
1804 | return; | |
1805 | ||
1806 | if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS) { | |
1807 | printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " | |
1808 | "globally as drives are exposed\n", ioc->name); | |
1809 | return; | |
1810 | } | |
1811 | if (_scsih_get_num_volumes(ioc) > 1) { | |
1812 | _scsih_disable_ddio(ioc); | |
1813 | printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " | |
1814 | "globally as number of drives > 1\n", ioc->name); | |
1815 | return; | |
1816 | } | |
1817 | if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle, | |
1818 | &num_pds)) || !num_pds) { | |
1819 | printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " | |
1820 | "Failure in computing number of drives\n", ioc->name); | |
1821 | return; | |
1822 | } | |
1823 | ||
1824 | sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds * | |
1825 | sizeof(Mpi2RaidVol0PhysDisk_t)); | |
1826 | vol_pg0 = kzalloc(sz, GFP_KERNEL); | |
1827 | if (!vol_pg0) { | |
1828 | printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " | |
1829 | "Memory allocation failure for RVPG0\n", ioc->name); | |
1830 | return; | |
1831 | } | |
1832 | ||
1833 | if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0, | |
1834 | MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) { | |
1835 | printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " | |
1836 | "Failure in retrieving RVPG0\n", ioc->name); | |
1837 | kfree(vol_pg0); | |
1838 | return; | |
1839 | } | |
1840 | ||
1841 | /* | |
1842 | * WARPDRIVE:If number of physical disks in a volume exceeds the max pds | |
1843 | * assumed for WARPDRIVE, disable direct I/O | |
1844 | */ | |
1845 | if (num_pds > MPT_MAX_WARPDRIVE_PDS) { | |
1846 | printk(MPT2SAS_WARN_FMT "WarpDrive : Direct IO is disabled " | |
1847 | "for the drive with handle(0x%04x): num_mem=%d, " | |
1848 | "max_mem_allowed=%d\n", ioc->name, raid_device->handle, | |
1849 | num_pds, MPT_MAX_WARPDRIVE_PDS); | |
1850 | kfree(vol_pg0); | |
1851 | return; | |
1852 | } | |
1853 | for (count = 0; count < num_pds; count++) { | |
1854 | if (mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply, | |
1855 | &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM, | |
1856 | vol_pg0->PhysDisk[count].PhysDiskNum) || | |
d838c36c | 1857 | le16_to_cpu(pd_pg0.DevHandle) == |
1858 | MPT2SAS_INVALID_DEVICE_HANDLE) { | |
0bdccdb0 KD |
1859 | printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is " |
1860 | "disabled for the drive with handle(0x%04x) member" | |
1861 | "handle retrieval failed for member number=%d\n", | |
1862 | ioc->name, raid_device->handle, | |
1863 | vol_pg0->PhysDisk[count].PhysDiskNum); | |
1864 | goto out_error; | |
1865 | } | |
ba96bd0b | 1866 | /* Disable direct I/O if member drive lba exceeds 4 bytes */ |
1867 | dev_max_lba = le64_to_cpu(pd_pg0.DeviceMaxLBA); | |
1868 | if (dev_max_lba >> 32) { | |
1869 | printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is " | |
1870 | "disabled for the drive with handle(0x%04x) member" | |
1871 | "handle (0x%04x) unsupported max lba 0x%016llx\n", | |
1872 | ioc->name, raid_device->handle, | |
1873 | le16_to_cpu(pd_pg0.DevHandle), | |
1874 | (unsigned long long)dev_max_lba); | |
1875 | goto out_error; | |
1876 | } | |
1877 | ||
0bdccdb0 KD |
1878 | raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle); |
1879 | } | |
1880 | ||
1881 | /* | |
1882 | * Assumption for WD: Direct I/O is not supported if the volume is | |
ba96bd0b | 1883 | * not RAID0 |
0bdccdb0 | 1884 | */ |
ba96bd0b | 1885 | if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0) { |
0bdccdb0 KD |
1886 | printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " |
1887 | "for the drive with handle(0x%04x): type=%d, " | |
1888 | "s_sz=%uK, blk_size=%u\n", ioc->name, | |
1889 | raid_device->handle, raid_device->volume_type, | |
ba96bd0b | 1890 | (le32_to_cpu(vol_pg0->StripeSize) * |
1891 | le16_to_cpu(vol_pg0->BlockSize)) / 1024, | |
0bdccdb0 KD |
1892 | le16_to_cpu(vol_pg0->BlockSize)); |
1893 | goto out_error; | |
1894 | } | |
1895 | ||
ba96bd0b | 1896 | stripe_sz = le32_to_cpu(vol_pg0->StripeSize); |
1897 | stripe_exp = find_first_bit(&stripe_sz, 32); | |
1898 | if (stripe_exp == 32) { | |
0bdccdb0 | 1899 | printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " |
ba96bd0b | 1900 | "for the drive with handle(0x%04x) invalid stripe sz %uK\n", |
1901 | ioc->name, raid_device->handle, | |
1902 | (le32_to_cpu(vol_pg0->StripeSize) * | |
1903 | le16_to_cpu(vol_pg0->BlockSize)) / 1024); | |
0bdccdb0 KD |
1904 | goto out_error; |
1905 | } | |
ba96bd0b | 1906 | raid_device->stripe_exponent = stripe_exp; |
1907 | block_sz = le16_to_cpu(vol_pg0->BlockSize); | |
1908 | block_exp = find_first_bit(&block_sz, 16); | |
1909 | if (block_exp == 16) { | |
0bdccdb0 | 1910 | printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " |
ba96bd0b | 1911 | "for the drive with handle(0x%04x) invalid block sz %u\n", |
0bdccdb0 | 1912 | ioc->name, raid_device->handle, |
ba96bd0b | 1913 | le16_to_cpu(vol_pg0->BlockSize)); |
0bdccdb0 KD |
1914 | goto out_error; |
1915 | } | |
ba96bd0b | 1916 | raid_device->block_exponent = block_exp; |
0bdccdb0 KD |
1917 | raid_device->direct_io_enabled = 1; |
1918 | ||
1919 | printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is Enabled for the drive" | |
1920 | " with handle(0x%04x)\n", ioc->name, raid_device->handle); | |
1921 | /* | |
1922 | * WARPDRIVE: Though the following fields are not used for direct IO, | |
1923 | * stored for future purpose: | |
1924 | */ | |
1925 | raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA); | |
1926 | raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize); | |
1927 | raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize); | |
1928 | ||
1929 | ||
1930 | kfree(vol_pg0); | |
1931 | return; | |
1932 | ||
1933 | out_error: | |
1934 | raid_device->direct_io_enabled = 0; | |
1935 | for (count = 0; count < num_pds; count++) | |
1936 | raid_device->pd_handle[count] = 0; | |
1937 | kfree(vol_pg0); | |
1938 | return; | |
1939 | } | |
635374e7 | 1940 | |
84f0b04a KD |
1941 | /** |
1942 | * _scsih_enable_tlr - setting TLR flags | |
1943 | * @ioc: per adapter object | |
1944 | * @sdev: scsi device struct | |
1945 | * | |
1946 | * Enabling Transaction Layer Retries for tape devices when | |
1947 | * vpd page 0x90 is present | |
1948 | * | |
1949 | */ | |
1950 | static void | |
1951 | _scsih_enable_tlr(struct MPT2SAS_ADAPTER *ioc, struct scsi_device *sdev) | |
1952 | { | |
1953 | /* only for TAPE */ | |
1954 | if (sdev->type != TYPE_TAPE) | |
1955 | return; | |
1956 | ||
1957 | if (!(ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR)) | |
1958 | return; | |
1959 | ||
1960 | sas_enable_tlr(sdev); | |
1961 | sdev_printk(KERN_INFO, sdev, "TLR %s\n", | |
1962 | sas_is_tlr_enabled(sdev) ? "Enabled" : "Disabled"); | |
1963 | return; | |
1964 | ||
1965 | } | |
1966 | ||
635374e7 | 1967 | /** |
d5d135b3 | 1968 | * _scsih_slave_configure - device configure routine. |
635374e7 EM |
1969 | * @sdev: scsi device struct |
1970 | * | |
1971 | * Returns 0 if ok. Any other return is assumed to be an error and | |
1972 | * the device is ignored. | |
1973 | */ | |
1974 | static int | |
d5d135b3 | 1975 | _scsih_slave_configure(struct scsi_device *sdev) |
635374e7 EM |
1976 | { |
1977 | struct Scsi_Host *shost = sdev->host; | |
1978 | struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); | |
1979 | struct MPT2SAS_DEVICE *sas_device_priv_data; | |
1980 | struct MPT2SAS_TARGET *sas_target_priv_data; | |
1981 | struct _sas_device *sas_device; | |
1982 | struct _raid_device *raid_device; | |
1983 | unsigned long flags; | |
1984 | int qdepth; | |
1985 | u8 ssp_target = 0; | |
1986 | char *ds = ""; | |
1987 | char *r_level = ""; | |
09da0b32 | 1988 | u16 handle, volume_handle = 0; |
1989 | u64 volume_wwid = 0; | |
635374e7 EM |
1990 | |
1991 | qdepth = 1; | |
1992 | sas_device_priv_data = sdev->hostdata; | |
1993 | sas_device_priv_data->configured_lun = 1; | |
1994 | sas_device_priv_data->flags &= ~MPT_DEVICE_FLAGS_INIT; | |
1995 | sas_target_priv_data = sas_device_priv_data->sas_target; | |
09da0b32 | 1996 | handle = sas_target_priv_data->handle; |
635374e7 EM |
1997 | |
1998 | /* raid volume handling */ | |
1999 | if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) { | |
2000 | ||
2001 | spin_lock_irqsave(&ioc->raid_device_lock, flags); | |
09da0b32 | 2002 | raid_device = _scsih_raid_device_find_by_handle(ioc, handle); |
635374e7 EM |
2003 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); |
2004 | if (!raid_device) { | |
6faace2a | 2005 | dfailprintk(ioc, printk(MPT2SAS_WARN_FMT |
2006 | "failure at %s:%d/%s()!\n", ioc->name, __FILE__, | |
2007 | __LINE__, __func__)); | |
2008 | return 1; | |
635374e7 EM |
2009 | } |
2010 | ||
6faace2a | 2011 | if (_scsih_get_volume_capabilities(ioc, raid_device)) { |
2012 | dfailprintk(ioc, printk(MPT2SAS_WARN_FMT | |
2013 | "failure at %s:%d/%s()!\n", ioc->name, __FILE__, | |
2014 | __LINE__, __func__)); | |
2015 | return 1; | |
2016 | } | |
0bdccdb0 KD |
2017 | /* |
2018 | * WARPDRIVE: Initialize the required data for Direct IO | |
2019 | */ | |
2020 | _scsih_init_warpdrive_properties(ioc, raid_device); | |
2021 | ||
635374e7 EM |
2022 | /* RAID Queue Depth Support |
2023 | * IS volume = underlying qdepth of drive type, either | |
2024 | * MPT2SAS_SAS_QUEUE_DEPTH or MPT2SAS_SATA_QUEUE_DEPTH | |
2025 | * IM/IME/R10 = 128 (MPT2SAS_RAID_QUEUE_DEPTH) | |
2026 | */ | |
2027 | if (raid_device->device_info & | |
2028 | MPI2_SAS_DEVICE_INFO_SSP_TARGET) { | |
2029 | qdepth = MPT2SAS_SAS_QUEUE_DEPTH; | |
2030 | ds = "SSP"; | |
2031 | } else { | |
2032 | qdepth = MPT2SAS_SATA_QUEUE_DEPTH; | |
2033 | if (raid_device->device_info & | |
2034 | MPI2_SAS_DEVICE_INFO_SATA_DEVICE) | |
2035 | ds = "SATA"; | |
2036 | else | |
2037 | ds = "STP"; | |
2038 | } | |
2039 | ||
2040 | switch (raid_device->volume_type) { | |
2041 | case MPI2_RAID_VOL_TYPE_RAID0: | |
2042 | r_level = "RAID0"; | |
2043 | break; | |
2044 | case MPI2_RAID_VOL_TYPE_RAID1E: | |
2045 | qdepth = MPT2SAS_RAID_QUEUE_DEPTH; | |
ed79f128 | 2046 | if (ioc->manu_pg10.OEMIdentifier && |
c97951ec | 2047 | (le32_to_cpu(ioc->manu_pg10.GenericFlags0) & |
ed79f128 KD |
2048 | MFG10_GF0_R10_DISPLAY) && |
2049 | !(raid_device->num_pds % 2)) | |
2050 | r_level = "RAID10"; | |
2051 | else | |
2052 | r_level = "RAID1E"; | |
635374e7 EM |
2053 | break; |
2054 | case MPI2_RAID_VOL_TYPE_RAID1: | |
2055 | qdepth = MPT2SAS_RAID_QUEUE_DEPTH; | |
2056 | r_level = "RAID1"; | |
2057 | break; | |
2058 | case MPI2_RAID_VOL_TYPE_RAID10: | |
2059 | qdepth = MPT2SAS_RAID_QUEUE_DEPTH; | |
2060 | r_level = "RAID10"; | |
2061 | break; | |
2062 | case MPI2_RAID_VOL_TYPE_UNKNOWN: | |
2063 | default: | |
2064 | qdepth = MPT2SAS_RAID_QUEUE_DEPTH; | |
2065 | r_level = "RAIDX"; | |
2066 | break; | |
2067 | } | |
2068 | ||
0bdccdb0 KD |
2069 | if (!ioc->hide_ir_msg) |
2070 | sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), " | |
2071 | "wwid(0x%016llx), pd_count(%d), type(%s)\n", | |
2072 | r_level, raid_device->handle, | |
2073 | (unsigned long long)raid_device->wwid, | |
2074 | raid_device->num_pds, ds); | |
e881a172 | 2075 | _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT); |
f7c95ef0 | 2076 | /* raid transport support */ |
0bdccdb0 | 2077 | if (!ioc->is_warpdrive) |
09da0b32 | 2078 | _scsih_set_level(sdev, raid_device->volume_type); |
635374e7 EM |
2079 | return 0; |
2080 | } | |
2081 | ||
2082 | /* non-raid handling */ | |
09da0b32 | 2083 | if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) { |
2084 | if (mpt2sas_config_get_volume_handle(ioc, handle, | |
2085 | &volume_handle)) { | |
2086 | dfailprintk(ioc, printk(MPT2SAS_WARN_FMT | |
2087 | "failure at %s:%d/%s()!\n", ioc->name, | |
2088 | __FILE__, __LINE__, __func__)); | |
2089 | return 1; | |
635374e7 | 2090 | } |
09da0b32 | 2091 | if (volume_handle && mpt2sas_config_get_volume_wwid(ioc, |
2092 | volume_handle, &volume_wwid)) { | |
2093 | dfailprintk(ioc, printk(MPT2SAS_WARN_FMT | |
2094 | "failure at %s:%d/%s()!\n", ioc->name, | |
2095 | __FILE__, __LINE__, __func__)); | |
2096 | return 1; | |
635374e7 | 2097 | } |
09da0b32 | 2098 | } |
635374e7 | 2099 | |
09da0b32 | 2100 | spin_lock_irqsave(&ioc->sas_device_lock, flags); |
2101 | sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, | |
2102 | sas_device_priv_data->sas_target->sas_address); | |
2103 | if (!sas_device) { | |
2104 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
6faace2a | 2105 | dfailprintk(ioc, printk(MPT2SAS_WARN_FMT |
09da0b32 | 2106 | "failure at %s:%d/%s()!\n", ioc->name, __FILE__, |
2107 | __LINE__, __func__)); | |
6faace2a | 2108 | return 1; |
635374e7 | 2109 | } |
09da0b32 | 2110 | sas_device->volume_handle = volume_handle; |
2111 | sas_device->volume_wwid = volume_wwid; | |
2112 | if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) { | |
2113 | qdepth = MPT2SAS_SAS_QUEUE_DEPTH; | |
2114 | ssp_target = 1; | |
2115 | ds = "SSP"; | |
2116 | } else { | |
2117 | qdepth = MPT2SAS_SATA_QUEUE_DEPTH; | |
2118 | if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) | |
2119 | ds = "STP"; | |
2120 | else if (sas_device->device_info & | |
2121 | MPI2_SAS_DEVICE_INFO_SATA_DEVICE) | |
2122 | ds = "SATA"; | |
2123 | } | |
2124 | sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), " | |
2125 | "sas_addr(0x%016llx), phy(%d), device_name(0x%016llx)\n", | |
2126 | ds, sas_device->handle, | |
2127 | (unsigned long long)sas_device->sas_address, | |
2128 | sas_device->phy, | |
2129 | (unsigned long long)sas_device->device_name); | |
2130 | sdev_printk(KERN_INFO, sdev, "%s: " | |
2131 | "enclosure_logical_id(0x%016llx), slot(%d)\n", ds, | |
2132 | (unsigned long long) sas_device->enclosure_logical_id, | |
2133 | sas_device->slot); | |
2134 | ||
2135 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
2136 | if (!ssp_target) | |
2137 | _scsih_display_sata_capabilities(ioc, handle, sdev); | |
2138 | ||
635374e7 | 2139 | |
e881a172 | 2140 | _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT); |
635374e7 | 2141 | |
84f0b04a | 2142 | if (ssp_target) { |
635374e7 | 2143 | sas_read_port_mode_page(sdev); |
84f0b04a KD |
2144 | _scsih_enable_tlr(ioc, sdev); |
2145 | } | |
635374e7 EM |
2146 | return 0; |
2147 | } | |
2148 | ||
2149 | /** | |
d5d135b3 | 2150 | * _scsih_bios_param - fetch head, sector, cylinder info for a disk |
635374e7 EM |
2151 | * @sdev: scsi device struct |
2152 | * @bdev: pointer to block device context | |
2153 | * @capacity: device size (in 512 byte sectors) | |
2154 | * @params: three element array to place output: | |
2155 | * params[0] number of heads (max 255) | |
2156 | * params[1] number of sectors (max 63) | |
2157 | * params[2] number of cylinders | |
2158 | * | |
2159 | * Return nothing. | |
2160 | */ | |
2161 | static int | |
d5d135b3 | 2162 | _scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev, |
635374e7 EM |
2163 | sector_t capacity, int params[]) |
2164 | { | |
2165 | int heads; | |
2166 | int sectors; | |
2167 | sector_t cylinders; | |
2168 | ulong dummy; | |
2169 | ||
2170 | heads = 64; | |
2171 | sectors = 32; | |
2172 | ||
2173 | dummy = heads * sectors; | |
2174 | cylinders = capacity; | |
2175 | sector_div(cylinders, dummy); | |
2176 | ||
2177 | /* | |
2178 | * Handle extended translation size for logical drives | |
2179 | * > 1Gb | |
2180 | */ | |
2181 | if ((ulong)capacity >= 0x200000) { | |
2182 | heads = 255; | |
2183 | sectors = 63; | |
2184 | dummy = heads * sectors; | |
2185 | cylinders = capacity; | |
2186 | sector_div(cylinders, dummy); | |
2187 | } | |
2188 | ||
2189 | /* return result */ | |
2190 | params[0] = heads; | |
2191 | params[1] = sectors; | |
2192 | params[2] = cylinders; | |
2193 | ||
2194 | return 0; | |
2195 | } | |
2196 | ||
2197 | /** | |
2198 | * _scsih_response_code - translation of device response code | |
2199 | * @ioc: per adapter object | |
2200 | * @response_code: response code returned by the device | |
2201 | * | |
2202 | * Return nothing. | |
2203 | */ | |
2204 | static void | |
2205 | _scsih_response_code(struct MPT2SAS_ADAPTER *ioc, u8 response_code) | |
2206 | { | |
2207 | char *desc; | |
2208 | ||
2209 | switch (response_code) { | |
2210 | case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE: | |
2211 | desc = "task management request completed"; | |
2212 | break; | |
2213 | case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME: | |
2214 | desc = "invalid frame"; | |
2215 | break; | |
2216 | case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED: | |
2217 | desc = "task management request not supported"; | |
2218 | break; | |
2219 | case MPI2_SCSITASKMGMT_RSP_TM_FAILED: | |
2220 | desc = "task management request failed"; | |
2221 | break; | |
2222 | case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED: | |
2223 | desc = "task management request succeeded"; | |
2224 | break; | |
2225 | case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN: | |
2226 | desc = "invalid lun"; | |
2227 | break; | |
2228 | case 0xA: | |
2229 | desc = "overlapped tag attempted"; | |
2230 | break; | |
2231 | case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC: | |
2232 | desc = "task queued, however not sent to target"; | |
2233 | break; | |
2234 | default: | |
2235 | desc = "unknown"; | |
2236 | break; | |
2237 | } | |
2238 | printk(MPT2SAS_WARN_FMT "response_code(0x%01x): %s\n", | |
2239 | ioc->name, response_code, desc); | |
2240 | } | |
2241 | ||
2242 | /** | |
d5d135b3 | 2243 | * _scsih_tm_done - tm completion routine |
635374e7 EM |
2244 | * @ioc: per adapter object |
2245 | * @smid: system request message index | |
7b936b02 | 2246 | * @msix_index: MSIX table index supplied by the OS |
635374e7 EM |
2247 | * @reply: reply message frame(lower 32bit addr) |
2248 | * Context: none. | |
2249 | * | |
2250 | * The callback handler when using scsih_issue_tm. | |
2251 | * | |
77e63ed4 KD |
2252 | * Return 1 meaning mf should be freed from _base_interrupt |
2253 | * 0 means the mf is freed from this function. | |
635374e7 | 2254 | */ |
77e63ed4 | 2255 | static u8 |
7b936b02 | 2256 | _scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) |
635374e7 EM |
2257 | { |
2258 | MPI2DefaultReply_t *mpi_reply; | |
2259 | ||
2260 | if (ioc->tm_cmds.status == MPT2_CMD_NOT_USED) | |
77e63ed4 | 2261 | return 1; |
635374e7 | 2262 | if (ioc->tm_cmds.smid != smid) |
77e63ed4 | 2263 | return 1; |
911ae943 | 2264 | mpt2sas_base_flush_reply_queues(ioc); |
635374e7 EM |
2265 | ioc->tm_cmds.status |= MPT2_CMD_COMPLETE; |
2266 | mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); | |
2267 | if (mpi_reply) { | |
2268 | memcpy(ioc->tm_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); | |
2269 | ioc->tm_cmds.status |= MPT2_CMD_REPLY_VALID; | |
2270 | } | |
2271 | ioc->tm_cmds.status &= ~MPT2_CMD_PENDING; | |
2272 | complete(&ioc->tm_cmds.done); | |
77e63ed4 | 2273 | return 1; |
635374e7 EM |
2274 | } |
2275 | ||
2276 | /** | |
2277 | * mpt2sas_scsih_set_tm_flag - set per target tm_busy | |
2278 | * @ioc: per adapter object | |
2279 | * @handle: device handle | |
2280 | * | |
2281 | * During taskmangement request, we need to freeze the device queue. | |
2282 | */ | |
2283 | void | |
2284 | mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle) | |
2285 | { | |
2286 | struct MPT2SAS_DEVICE *sas_device_priv_data; | |
2287 | struct scsi_device *sdev; | |
2288 | u8 skip = 0; | |
2289 | ||
2290 | shost_for_each_device(sdev, ioc->shost) { | |
2291 | if (skip) | |
2292 | continue; | |
2293 | sas_device_priv_data = sdev->hostdata; | |
2294 | if (!sas_device_priv_data) | |
2295 | continue; | |
2296 | if (sas_device_priv_data->sas_target->handle == handle) { | |
2297 | sas_device_priv_data->sas_target->tm_busy = 1; | |
2298 | skip = 1; | |
2299 | ioc->ignore_loginfos = 1; | |
2300 | } | |
2301 | } | |
2302 | } | |
2303 | ||
2304 | /** | |
2305 | * mpt2sas_scsih_clear_tm_flag - clear per target tm_busy | |
2306 | * @ioc: per adapter object | |
2307 | * @handle: device handle | |
2308 | * | |
2309 | * During taskmangement request, we need to freeze the device queue. | |
2310 | */ | |
2311 | void | |
2312 | mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle) | |
2313 | { | |
2314 | struct MPT2SAS_DEVICE *sas_device_priv_data; | |
2315 | struct scsi_device *sdev; | |
2316 | u8 skip = 0; | |
2317 | ||
2318 | shost_for_each_device(sdev, ioc->shost) { | |
2319 | if (skip) | |
2320 | continue; | |
2321 | sas_device_priv_data = sdev->hostdata; | |
2322 | if (!sas_device_priv_data) | |
2323 | continue; | |
2324 | if (sas_device_priv_data->sas_target->handle == handle) { | |
2325 | sas_device_priv_data->sas_target->tm_busy = 0; | |
2326 | skip = 1; | |
2327 | ioc->ignore_loginfos = 0; | |
2328 | } | |
2329 | } | |
2330 | } | |
2331 | ||
8ed9a03a | 2332 | |
635374e7 EM |
2333 | /** |
2334 | * mpt2sas_scsih_issue_tm - main routine for sending tm requests | |
2335 | * @ioc: per adapter struct | |
2336 | * @device_handle: device handle | |
8ed9a03a KD |
2337 | * @channel: the channel assigned by the OS |
2338 | * @id: the id assigned by the OS | |
635374e7 EM |
2339 | * @lun: lun number |
2340 | * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h) | |
2341 | * @smid_task: smid assigned to the task | |
2342 | * @timeout: timeout in seconds | |
f93213de KD |
2343 | * @serial_number: the serial_number from scmd |
2344 | * @m_type: TM_MUTEX_ON or TM_MUTEX_OFF | |
8ed9a03a | 2345 | * Context: user |
635374e7 EM |
2346 | * |
2347 | * A generic API for sending task management requests to firmware. | |
2348 | * | |
635374e7 EM |
2349 | * The callback index is set inside `ioc->tm_cb_idx`. |
2350 | * | |
8ed9a03a | 2351 | * Return SUCCESS or FAILED. |
635374e7 | 2352 | */ |
8ed9a03a KD |
2353 | int |
2354 | mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint channel, | |
2355 | uint id, uint lun, u8 type, u16 smid_task, ulong timeout, | |
f93213de | 2356 | unsigned long serial_number, enum mutex_type m_type) |
635374e7 EM |
2357 | { |
2358 | Mpi2SCSITaskManagementRequest_t *mpi_request; | |
2359 | Mpi2SCSITaskManagementReply_t *mpi_reply; | |
2360 | u16 smid = 0; | |
2361 | u32 ioc_state; | |
2362 | unsigned long timeleft; | |
f93213de | 2363 | struct scsiio_tracker *scsi_lookup = NULL; |
8ed9a03a | 2364 | int rc; |
635374e7 | 2365 | |
f93213de KD |
2366 | if (m_type == TM_MUTEX_ON) |
2367 | mutex_lock(&ioc->tm_cmds.mutex); | |
155dd4c7 KD |
2368 | if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED) { |
2369 | printk(MPT2SAS_INFO_FMT "%s: tm_cmd busy!!!\n", | |
2370 | __func__, ioc->name); | |
8ed9a03a KD |
2371 | rc = FAILED; |
2372 | goto err_out; | |
155dd4c7 KD |
2373 | } |
2374 | ||
3cb5469a EM |
2375 | if (ioc->shost_recovery || ioc->remove_host || |
2376 | ioc->pci_error_recovery) { | |
635374e7 EM |
2377 | printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", |
2378 | __func__, ioc->name); | |
8ed9a03a KD |
2379 | rc = FAILED; |
2380 | goto err_out; | |
635374e7 | 2381 | } |
635374e7 EM |
2382 | |
2383 | ioc_state = mpt2sas_base_get_iocstate(ioc, 0); | |
2384 | if (ioc_state & MPI2_DOORBELL_USED) { | |
eabb08ad | 2385 | dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "unexpected doorbell " |
635374e7 | 2386 | "active!\n", ioc->name)); |
f93213de | 2387 | rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, |
8ed9a03a | 2388 | FORCE_BIG_HAMMER); |
f93213de | 2389 | rc = (!rc) ? SUCCESS : FAILED; |
8ed9a03a | 2390 | goto err_out; |
635374e7 EM |
2391 | } |
2392 | ||
2393 | if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { | |
2394 | mpt2sas_base_fault_info(ioc, ioc_state & | |
2395 | MPI2_DOORBELL_DATA_MASK); | |
f93213de | 2396 | rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, |
8ed9a03a | 2397 | FORCE_BIG_HAMMER); |
f93213de | 2398 | rc = (!rc) ? SUCCESS : FAILED; |
8ed9a03a | 2399 | goto err_out; |
635374e7 EM |
2400 | } |
2401 | ||
595bb0bd | 2402 | smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_cb_idx); |
635374e7 EM |
2403 | if (!smid) { |
2404 | printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", | |
2405 | ioc->name, __func__); | |
8ed9a03a KD |
2406 | rc = FAILED; |
2407 | goto err_out; | |
635374e7 EM |
2408 | } |
2409 | ||
f93213de KD |
2410 | if (type == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) |
2411 | scsi_lookup = &ioc->scsi_lookup[smid_task - 1]; | |
2412 | ||
635374e7 | 2413 | dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "sending tm: handle(0x%04x)," |
595bb0bd KD |
2414 | " task_type(0x%02x), smid(%d)\n", ioc->name, handle, type, |
2415 | smid_task)); | |
635374e7 EM |
2416 | ioc->tm_cmds.status = MPT2_CMD_PENDING; |
2417 | mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); | |
2418 | ioc->tm_cmds.smid = smid; | |
2419 | memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t)); | |
f93213de | 2420 | memset(ioc->tm_cmds.reply, 0, sizeof(Mpi2SCSITaskManagementReply_t)); |
635374e7 EM |
2421 | mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; |
2422 | mpi_request->DevHandle = cpu_to_le16(handle); | |
2423 | mpi_request->TaskType = type; | |
2424 | mpi_request->TaskMID = cpu_to_le16(smid_task); | |
2425 | int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN); | |
2426 | mpt2sas_scsih_set_tm_flag(ioc, handle); | |
5b768581 | 2427 | init_completion(&ioc->tm_cmds.done); |
7b936b02 | 2428 | mpt2sas_base_put_smid_hi_priority(ioc, smid); |
635374e7 | 2429 | timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ); |
635374e7 EM |
2430 | if (!(ioc->tm_cmds.status & MPT2_CMD_COMPLETE)) { |
2431 | printk(MPT2SAS_ERR_FMT "%s: timeout\n", | |
2432 | ioc->name, __func__); | |
2433 | _debug_dump_mf(mpi_request, | |
2434 | sizeof(Mpi2SCSITaskManagementRequest_t)/4); | |
8ed9a03a | 2435 | if (!(ioc->tm_cmds.status & MPT2_CMD_RESET)) { |
f93213de | 2436 | rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, |
8ed9a03a | 2437 | FORCE_BIG_HAMMER); |
f93213de | 2438 | rc = (!rc) ? SUCCESS : FAILED; |
8ed9a03a KD |
2439 | ioc->tm_cmds.status = MPT2_CMD_NOT_USED; |
2440 | mpt2sas_scsih_clear_tm_flag(ioc, handle); | |
2441 | goto err_out; | |
2442 | } | |
635374e7 EM |
2443 | } |
2444 | ||
2445 | if (ioc->tm_cmds.status & MPT2_CMD_REPLY_VALID) { | |
2446 | mpi_reply = ioc->tm_cmds.reply; | |
2447 | dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "complete tm: " | |
2448 | "ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n", | |
2449 | ioc->name, le16_to_cpu(mpi_reply->IOCStatus), | |
2450 | le32_to_cpu(mpi_reply->IOCLogInfo), | |
2451 | le32_to_cpu(mpi_reply->TerminationCount))); | |
8ed9a03a | 2452 | if (ioc->logging_level & MPT_DEBUG_TM) { |
635374e7 | 2453 | _scsih_response_code(ioc, mpi_reply->ResponseCode); |
8ed9a03a KD |
2454 | if (mpi_reply->IOCStatus) |
2455 | _debug_dump_mf(mpi_request, | |
2456 | sizeof(Mpi2SCSITaskManagementRequest_t)/4); | |
2457 | } | |
635374e7 | 2458 | } |
8ed9a03a | 2459 | |
8ed9a03a KD |
2460 | switch (type) { |
2461 | case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK: | |
f93213de KD |
2462 | rc = SUCCESS; |
2463 | if (scsi_lookup->scmd == NULL) | |
2464 | break; | |
2465 | rc = FAILED; | |
8ed9a03a KD |
2466 | break; |
2467 | ||
2468 | case MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET: | |
2469 | if (_scsih_scsi_lookup_find_by_target(ioc, id, channel)) | |
2470 | rc = FAILED; | |
2471 | else | |
2472 | rc = SUCCESS; | |
2473 | break; | |
2474 | ||
f93213de | 2475 | case MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET: |
8ed9a03a KD |
2476 | case MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET: |
2477 | if (_scsih_scsi_lookup_find_by_lun(ioc, id, lun, channel)) | |
2478 | rc = FAILED; | |
2479 | else | |
2480 | rc = SUCCESS; | |
2481 | break; | |
f93213de KD |
2482 | case MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK: |
2483 | rc = SUCCESS; | |
2484 | break; | |
2485 | default: | |
2486 | rc = FAILED; | |
2487 | break; | |
8ed9a03a KD |
2488 | } |
2489 | ||
8ed9a03a KD |
2490 | mpt2sas_scsih_clear_tm_flag(ioc, handle); |
2491 | ioc->tm_cmds.status = MPT2_CMD_NOT_USED; | |
f93213de KD |
2492 | if (m_type == TM_MUTEX_ON) |
2493 | mutex_unlock(&ioc->tm_cmds.mutex); | |
8ed9a03a KD |
2494 | |
2495 | return rc; | |
2496 | ||
2497 | err_out: | |
f93213de KD |
2498 | if (m_type == TM_MUTEX_ON) |
2499 | mutex_unlock(&ioc->tm_cmds.mutex); | |
8ed9a03a | 2500 | return rc; |
635374e7 EM |
2501 | } |
2502 | ||
8e864a81 KD |
2503 | /** |
2504 | * _scsih_tm_display_info - displays info about the device | |
2505 | * @ioc: per adapter struct | |
2506 | * @scmd: pointer to scsi command object | |
2507 | * | |
2508 | * Called by task management callback handlers. | |
2509 | */ | |
2510 | static void | |
2511 | _scsih_tm_display_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd) | |
2512 | { | |
2513 | struct scsi_target *starget = scmd->device->sdev_target; | |
2514 | struct MPT2SAS_TARGET *priv_target = starget->hostdata; | |
2515 | struct _sas_device *sas_device = NULL; | |
2516 | unsigned long flags; | |
0bdccdb0 | 2517 | char *device_str = NULL; |
8e864a81 KD |
2518 | |
2519 | if (!priv_target) | |
2520 | return; | |
0bdccdb0 KD |
2521 | if (ioc->hide_ir_msg) |
2522 | device_str = "WarpDrive"; | |
2523 | else | |
2524 | device_str = "volume"; | |
8e864a81 KD |
2525 | |
2526 | scsi_print_command(scmd); | |
2527 | if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) { | |
0bdccdb0 KD |
2528 | starget_printk(KERN_INFO, starget, "%s handle(0x%04x), " |
2529 | "%s wwid(0x%016llx)\n", device_str, priv_target->handle, | |
2530 | device_str, (unsigned long long)priv_target->sas_address); | |
8e864a81 KD |
2531 | } else { |
2532 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
2533 | sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, | |
2534 | priv_target->sas_address); | |
2535 | if (sas_device) { | |
2536 | if (priv_target->flags & | |
2537 | MPT_TARGET_FLAGS_RAID_COMPONENT) { | |
2538 | starget_printk(KERN_INFO, starget, | |
2539 | "volume handle(0x%04x), " | |
2540 | "volume wwid(0x%016llx)\n", | |
2541 | sas_device->volume_handle, | |
2542 | (unsigned long long)sas_device->volume_wwid); | |
2543 | } | |
2544 | starget_printk(KERN_INFO, starget, | |
2545 | "handle(0x%04x), sas_address(0x%016llx), phy(%d)\n", | |
2546 | sas_device->handle, | |
2547 | (unsigned long long)sas_device->sas_address, | |
2548 | sas_device->phy); | |
2549 | starget_printk(KERN_INFO, starget, | |
2550 | "enclosure_logical_id(0x%016llx), slot(%d)\n", | |
2551 | (unsigned long long)sas_device->enclosure_logical_id, | |
2552 | sas_device->slot); | |
2553 | } | |
2554 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
2555 | } | |
2556 | } | |
2557 | ||
635374e7 | 2558 | /** |
d5d135b3 | 2559 | * _scsih_abort - eh threads main abort routine |
8e864a81 | 2560 | * @scmd: pointer to scsi command object |
635374e7 EM |
2561 | * |
2562 | * Returns SUCCESS if command aborted else FAILED | |
2563 | */ | |
2564 | static int | |
d5d135b3 | 2565 | _scsih_abort(struct scsi_cmnd *scmd) |
635374e7 EM |
2566 | { |
2567 | struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); | |
2568 | struct MPT2SAS_DEVICE *sas_device_priv_data; | |
2569 | u16 smid; | |
2570 | u16 handle; | |
2571 | int r; | |
635374e7 | 2572 | |
8e864a81 KD |
2573 | sdev_printk(KERN_INFO, scmd->device, "attempting task abort! " |
2574 | "scmd(%p)\n", scmd); | |
2575 | _scsih_tm_display_info(ioc, scmd); | |
635374e7 EM |
2576 | |
2577 | sas_device_priv_data = scmd->device->hostdata; | |
2578 | if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { | |
8e864a81 KD |
2579 | sdev_printk(KERN_INFO, scmd->device, "device been deleted! " |
2580 | "scmd(%p)\n", scmd); | |
635374e7 EM |
2581 | scmd->result = DID_NO_CONNECT << 16; |
2582 | scmd->scsi_done(scmd); | |
2583 | r = SUCCESS; | |
2584 | goto out; | |
2585 | } | |
2586 | ||
2587 | /* search for the command */ | |
2588 | smid = _scsih_scsi_lookup_find_by_scmd(ioc, scmd); | |
2589 | if (!smid) { | |
2590 | scmd->result = DID_RESET << 16; | |
2591 | r = SUCCESS; | |
2592 | goto out; | |
2593 | } | |
2594 | ||
2595 | /* for hidden raid components and volumes this is not supported */ | |
2596 | if (sas_device_priv_data->sas_target->flags & | |
2597 | MPT_TARGET_FLAGS_RAID_COMPONENT || | |
2598 | sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_VOLUME) { | |
2599 | scmd->result = DID_RESET << 16; | |
2600 | r = FAILED; | |
2601 | goto out; | |
2602 | } | |
2603 | ||
fa7f3167 KD |
2604 | mpt2sas_halt_firmware(ioc); |
2605 | ||
635374e7 | 2606 | handle = sas_device_priv_data->sas_target->handle; |
8ed9a03a KD |
2607 | r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel, |
2608 | scmd->device->id, scmd->device->lun, | |
f93213de KD |
2609 | MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30, |
2610 | scmd->serial_number, TM_MUTEX_ON); | |
635374e7 EM |
2611 | |
2612 | out: | |
8e864a81 KD |
2613 | sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(%p)\n", |
2614 | ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); | |
635374e7 EM |
2615 | return r; |
2616 | } | |
2617 | ||
635374e7 | 2618 | /** |
d5d135b3 | 2619 | * _scsih_dev_reset - eh threads main device reset routine |
8e864a81 | 2620 | * @scmd: pointer to scsi command object |
635374e7 EM |
2621 | * |
2622 | * Returns SUCCESS if command aborted else FAILED | |
2623 | */ | |
2624 | static int | |
d5d135b3 | 2625 | _scsih_dev_reset(struct scsi_cmnd *scmd) |
635374e7 EM |
2626 | { |
2627 | struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); | |
2628 | struct MPT2SAS_DEVICE *sas_device_priv_data; | |
2629 | struct _sas_device *sas_device; | |
2630 | unsigned long flags; | |
2631 | u16 handle; | |
2632 | int r; | |
2633 | ||
8e864a81 KD |
2634 | struct scsi_target *starget = scmd->device->sdev_target; |
2635 | ||
37aaa78b | 2636 | starget_printk(KERN_INFO, starget, "attempting device reset! " |
8e864a81 KD |
2637 | "scmd(%p)\n", scmd); |
2638 | _scsih_tm_display_info(ioc, scmd); | |
635374e7 EM |
2639 | |
2640 | sas_device_priv_data = scmd->device->hostdata; | |
2641 | if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { | |
37aaa78b | 2642 | starget_printk(KERN_INFO, starget, "device been deleted! " |
8e864a81 | 2643 | "scmd(%p)\n", scmd); |
635374e7 EM |
2644 | scmd->result = DID_NO_CONNECT << 16; |
2645 | scmd->scsi_done(scmd); | |
2646 | r = SUCCESS; | |
2647 | goto out; | |
2648 | } | |
2649 | ||
2650 | /* for hidden raid components obtain the volume_handle */ | |
2651 | handle = 0; | |
2652 | if (sas_device_priv_data->sas_target->flags & | |
2653 | MPT_TARGET_FLAGS_RAID_COMPONENT) { | |
2654 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
2655 | sas_device = _scsih_sas_device_find_by_handle(ioc, | |
2656 | sas_device_priv_data->sas_target->handle); | |
2657 | if (sas_device) | |
2658 | handle = sas_device->volume_handle; | |
2659 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
2660 | } else | |
2661 | handle = sas_device_priv_data->sas_target->handle; | |
2662 | ||
2663 | if (!handle) { | |
2664 | scmd->result = DID_RESET << 16; | |
2665 | r = FAILED; | |
2666 | goto out; | |
2667 | } | |
2668 | ||
8ed9a03a KD |
2669 | r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel, |
2670 | scmd->device->id, scmd->device->lun, | |
f93213de KD |
2671 | MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 30, 0, |
2672 | TM_MUTEX_ON); | |
993e0da7 EM |
2673 | |
2674 | out: | |
8e864a81 KD |
2675 | sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(%p)\n", |
2676 | ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); | |
993e0da7 EM |
2677 | return r; |
2678 | } | |
2679 | ||
2680 | /** | |
d5d135b3 | 2681 | * _scsih_target_reset - eh threads main target reset routine |
8e864a81 | 2682 | * @scmd: pointer to scsi command object |
993e0da7 EM |
2683 | * |
2684 | * Returns SUCCESS if command aborted else FAILED | |
2685 | */ | |
2686 | static int | |
d5d135b3 | 2687 | _scsih_target_reset(struct scsi_cmnd *scmd) |
993e0da7 EM |
2688 | { |
2689 | struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); | |
2690 | struct MPT2SAS_DEVICE *sas_device_priv_data; | |
2691 | struct _sas_device *sas_device; | |
2692 | unsigned long flags; | |
2693 | u16 handle; | |
2694 | int r; | |
8e864a81 | 2695 | struct scsi_target *starget = scmd->device->sdev_target; |
993e0da7 | 2696 | |
8e864a81 KD |
2697 | starget_printk(KERN_INFO, starget, "attempting target reset! " |
2698 | "scmd(%p)\n", scmd); | |
2699 | _scsih_tm_display_info(ioc, scmd); | |
993e0da7 EM |
2700 | |
2701 | sas_device_priv_data = scmd->device->hostdata; | |
2702 | if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { | |
8e864a81 KD |
2703 | starget_printk(KERN_INFO, starget, "target been deleted! " |
2704 | "scmd(%p)\n", scmd); | |
993e0da7 EM |
2705 | scmd->result = DID_NO_CONNECT << 16; |
2706 | scmd->scsi_done(scmd); | |
2707 | r = SUCCESS; | |
2708 | goto out; | |
2709 | } | |
2710 | ||
2711 | /* for hidden raid components obtain the volume_handle */ | |
2712 | handle = 0; | |
2713 | if (sas_device_priv_data->sas_target->flags & | |
2714 | MPT_TARGET_FLAGS_RAID_COMPONENT) { | |
2715 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
2716 | sas_device = _scsih_sas_device_find_by_handle(ioc, | |
2717 | sas_device_priv_data->sas_target->handle); | |
2718 | if (sas_device) | |
2719 | handle = sas_device->volume_handle; | |
2720 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
2721 | } else | |
2722 | handle = sas_device_priv_data->sas_target->handle; | |
2723 | ||
2724 | if (!handle) { | |
2725 | scmd->result = DID_RESET << 16; | |
2726 | r = FAILED; | |
2727 | goto out; | |
2728 | } | |
2729 | ||
8ed9a03a KD |
2730 | r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel, |
2731 | scmd->device->id, 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0, | |
f93213de | 2732 | 30, 0, TM_MUTEX_ON); |
635374e7 EM |
2733 | |
2734 | out: | |
8e864a81 KD |
2735 | starget_printk(KERN_INFO, starget, "target reset: %s scmd(%p)\n", |
2736 | ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); | |
635374e7 EM |
2737 | return r; |
2738 | } | |
2739 | ||
2740 | /** | |
595bb0bd | 2741 | * _scsih_host_reset - eh threads main host reset routine |
8e864a81 | 2742 | * @scmd: pointer to scsi command object |
635374e7 EM |
2743 | * |
2744 | * Returns SUCCESS if command aborted else FAILED | |
2745 | */ | |
2746 | static int | |
d5d135b3 | 2747 | _scsih_host_reset(struct scsi_cmnd *scmd) |
635374e7 EM |
2748 | { |
2749 | struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); | |
2750 | int r, retval; | |
2751 | ||
2752 | printk(MPT2SAS_INFO_FMT "attempting host reset! scmd(%p)\n", | |
2753 | ioc->name, scmd); | |
2754 | scsi_print_command(scmd); | |
2755 | ||
2756 | retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, | |
2757 | FORCE_BIG_HAMMER); | |
2758 | r = (retval < 0) ? FAILED : SUCCESS; | |
2759 | printk(MPT2SAS_INFO_FMT "host reset: %s scmd(%p)\n", | |
2760 | ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd); | |
2761 | ||
2762 | return r; | |
2763 | } | |
2764 | ||
2765 | /** | |
2766 | * _scsih_fw_event_add - insert and queue up fw_event | |
2767 | * @ioc: per adapter object | |
2768 | * @fw_event: object describing the event | |
2769 | * Context: This function will acquire ioc->fw_event_lock. | |
2770 | * | |
2771 | * This adds the firmware event object into link list, then queues it up to | |
2772 | * be processed from user context. | |
2773 | * | |
2774 | * Return nothing. | |
2775 | */ | |
2776 | static void | |
2777 | _scsih_fw_event_add(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) | |
2778 | { | |
2779 | unsigned long flags; | |
2780 | ||
2781 | if (ioc->firmware_event_thread == NULL) | |
2782 | return; | |
2783 | ||
2784 | spin_lock_irqsave(&ioc->fw_event_lock, flags); | |
2785 | list_add_tail(&fw_event->list, &ioc->fw_event_list); | |
f1c35e6a KD |
2786 | INIT_DELAYED_WORK(&fw_event->delayed_work, _firmware_event_work); |
2787 | queue_delayed_work(ioc->firmware_event_thread, | |
2788 | &fw_event->delayed_work, 0); | |
635374e7 EM |
2789 | spin_unlock_irqrestore(&ioc->fw_event_lock, flags); |
2790 | } | |
2791 | ||
2792 | /** | |
2793 | * _scsih_fw_event_free - delete fw_event | |
2794 | * @ioc: per adapter object | |
2795 | * @fw_event: object describing the event | |
2796 | * Context: This function will acquire ioc->fw_event_lock. | |
2797 | * | |
2798 | * This removes firmware event object from link list, frees associated memory. | |
2799 | * | |
2800 | * Return nothing. | |
2801 | */ | |
2802 | static void | |
2803 | _scsih_fw_event_free(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work | |
2804 | *fw_event) | |
2805 | { | |
2806 | unsigned long flags; | |
2807 | ||
2808 | spin_lock_irqsave(&ioc->fw_event_lock, flags); | |
2809 | list_del(&fw_event->list); | |
2810 | kfree(fw_event->event_data); | |
2811 | kfree(fw_event); | |
2812 | spin_unlock_irqrestore(&ioc->fw_event_lock, flags); | |
2813 | } | |
2814 | ||
f1c35e6a | 2815 | |
635374e7 | 2816 | /** |
921cd802 | 2817 | * _scsih_error_recovery_delete_devices - remove devices not responding |
635374e7 | 2818 | * @ioc: per adapter object |
635374e7 EM |
2819 | * |
2820 | * Return nothing. | |
2821 | */ | |
2822 | static void | |
921cd802 | 2823 | _scsih_error_recovery_delete_devices(struct MPT2SAS_ADAPTER *ioc) |
635374e7 | 2824 | { |
f1c35e6a | 2825 | struct fw_event_work *fw_event; |
635374e7 | 2826 | |
921cd802 | 2827 | if (ioc->is_driver_loading) |
f1c35e6a | 2828 | return; |
181a9d79 DC |
2829 | |
2830 | fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); | |
2831 | if (!fw_event) | |
2832 | return; | |
2833 | ||
921cd802 | 2834 | fw_event->event = MPT2SAS_REMOVE_UNRESPONDING_DEVICES; |
2835 | fw_event->ioc = ioc; | |
2836 | _scsih_fw_event_add(ioc, fw_event); | |
2837 | } | |
2838 | ||
2839 | /** | |
2840 | * mpt2sas_port_enable_complete - port enable completed (fake event) | |
2841 | * @ioc: per adapter object | |
2842 | * | |
2843 | * Return nothing. | |
2844 | */ | |
2845 | void | |
2846 | mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc) | |
2847 | { | |
2848 | struct fw_event_work *fw_event; | |
2849 | ||
f1c35e6a KD |
2850 | fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); |
2851 | if (!fw_event) | |
2852 | return; | |
921cd802 | 2853 | fw_event->event = MPT2SAS_PORT_ENABLE_COMPLETE; |
f1c35e6a KD |
2854 | fw_event->ioc = ioc; |
2855 | _scsih_fw_event_add(ioc, fw_event); | |
635374e7 EM |
2856 | } |
2857 | ||
2858 | /** | |
f1c35e6a | 2859 | * _scsih_fw_event_cleanup_queue - cleanup event queue |
635374e7 EM |
2860 | * @ioc: per adapter object |
2861 | * | |
f1c35e6a KD |
2862 | * Walk the firmware event queue, either killing timers, or waiting |
2863 | * for outstanding events to complete | |
635374e7 EM |
2864 | * |
2865 | * Return nothing. | |
2866 | */ | |
2867 | static void | |
f1c35e6a | 2868 | _scsih_fw_event_cleanup_queue(struct MPT2SAS_ADAPTER *ioc) |
635374e7 | 2869 | { |
f1c35e6a | 2870 | struct fw_event_work *fw_event, *next; |
635374e7 | 2871 | |
f1c35e6a KD |
2872 | if (list_empty(&ioc->fw_event_list) || |
2873 | !ioc->firmware_event_thread || in_interrupt()) | |
2874 | return; | |
635374e7 | 2875 | |
f1c35e6a KD |
2876 | list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) { |
2877 | if (cancel_delayed_work(&fw_event->delayed_work)) { | |
2878 | _scsih_fw_event_free(ioc, fw_event); | |
2879 | continue; | |
2880 | } | |
2881 | fw_event->cancel_pending_work = 1; | |
2882 | } | |
635374e7 EM |
2883 | } |
2884 | ||
f93213de KD |
2885 | /** |
2886 | * _scsih_ublock_io_all_device - unblock every device | |
2887 | * @ioc: per adapter object | |
2888 | * | |
2889 | * change the device state from block to running | |
2890 | */ | |
2891 | static void | |
2892 | _scsih_ublock_io_all_device(struct MPT2SAS_ADAPTER *ioc) | |
2893 | { | |
2894 | struct MPT2SAS_DEVICE *sas_device_priv_data; | |
2895 | struct scsi_device *sdev; | |
2896 | ||
2897 | shost_for_each_device(sdev, ioc->shost) { | |
2898 | sas_device_priv_data = sdev->hostdata; | |
2899 | if (!sas_device_priv_data) | |
2900 | continue; | |
2901 | if (!sas_device_priv_data->block) | |
2902 | continue; | |
2903 | sas_device_priv_data->block = 0; | |
2904 | dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, "device_running, " | |
2905 | "handle(0x%04x)\n", | |
2906 | sas_device_priv_data->sas_target->handle)); | |
2907 | scsi_internal_device_unblock(sdev); | |
2908 | } | |
2909 | } | |
635374e7 EM |
2910 | /** |
2911 | * _scsih_ublock_io_device - set the device state to SDEV_RUNNING | |
2912 | * @ioc: per adapter object | |
2913 | * @handle: device handle | |
2914 | * | |
2915 | * During device pull we need to appropiately set the sdev state. | |
2916 | */ | |
2917 | static void | |
39af7a98 | 2918 | _scsih_ublock_io_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address) |
635374e7 EM |
2919 | { |
2920 | struct MPT2SAS_DEVICE *sas_device_priv_data; | |
2921 | struct scsi_device *sdev; | |
2922 | ||
2923 | shost_for_each_device(sdev, ioc->shost) { | |
2924 | sas_device_priv_data = sdev->hostdata; | |
2925 | if (!sas_device_priv_data) | |
2926 | continue; | |
2927 | if (!sas_device_priv_data->block) | |
2928 | continue; | |
39af7a98 | 2929 | if (sas_device_priv_data->sas_target->sas_address == |
2930 | sas_address) { | |
635374e7 EM |
2931 | dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, |
2932 | MPT2SAS_INFO_FMT "SDEV_RUNNING: " | |
39af7a98 | 2933 | "sas address(0x%016llx)\n", ioc->name, |
2934 | (unsigned long long)sas_address)); | |
635374e7 | 2935 | sas_device_priv_data->block = 0; |
34a03bef | 2936 | scsi_internal_device_unblock(sdev); |
635374e7 EM |
2937 | } |
2938 | } | |
2939 | } | |
2940 | ||
f93213de KD |
2941 | /** |
2942 | * _scsih_block_io_all_device - set the device state to SDEV_BLOCK | |
2943 | * @ioc: per adapter object | |
2944 | * @handle: device handle | |
2945 | * | |
2946 | * During device pull we need to appropiately set the sdev state. | |
2947 | */ | |
2948 | static void | |
2949 | _scsih_block_io_all_device(struct MPT2SAS_ADAPTER *ioc) | |
2950 | { | |
2951 | struct MPT2SAS_DEVICE *sas_device_priv_data; | |
2952 | struct scsi_device *sdev; | |
2953 | ||
2954 | shost_for_each_device(sdev, ioc->shost) { | |
2955 | sas_device_priv_data = sdev->hostdata; | |
2956 | if (!sas_device_priv_data) | |
2957 | continue; | |
2958 | if (sas_device_priv_data->block) | |
2959 | continue; | |
2960 | sas_device_priv_data->block = 1; | |
2961 | dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, "device_blocked, " | |
2962 | "handle(0x%04x)\n", | |
2963 | sas_device_priv_data->sas_target->handle)); | |
2964 | scsi_internal_device_block(sdev); | |
2965 | } | |
2966 | } | |
2967 | ||
2968 | ||
635374e7 EM |
2969 | /** |
2970 | * _scsih_block_io_device - set the device state to SDEV_BLOCK | |
2971 | * @ioc: per adapter object | |
2972 | * @handle: device handle | |
2973 | * | |
2974 | * During device pull we need to appropiately set the sdev state. | |
2975 | */ | |
2976 | static void | |
2977 | _scsih_block_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) | |
2978 | { | |
2979 | struct MPT2SAS_DEVICE *sas_device_priv_data; | |
2980 | struct scsi_device *sdev; | |
2981 | ||
2982 | shost_for_each_device(sdev, ioc->shost) { | |
2983 | sas_device_priv_data = sdev->hostdata; | |
2984 | if (!sas_device_priv_data) | |
2985 | continue; | |
2986 | if (sas_device_priv_data->block) | |
2987 | continue; | |
2988 | if (sas_device_priv_data->sas_target->handle == handle) { | |
2989 | dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, | |
2990 | MPT2SAS_INFO_FMT "SDEV_BLOCK: " | |
2991 | "handle(0x%04x)\n", ioc->name, handle)); | |
2992 | sas_device_priv_data->block = 1; | |
34a03bef | 2993 | scsi_internal_device_block(sdev); |
635374e7 EM |
2994 | } |
2995 | } | |
2996 | } | |
2997 | ||
2998 | /** | |
2999 | * _scsih_block_io_to_children_attached_to_ex | |
3000 | * @ioc: per adapter object | |
3001 | * @sas_expander: the sas_device object | |
3002 | * | |
3003 | * This routine set sdev state to SDEV_BLOCK for all devices | |
3004 | * attached to this expander. This function called when expander is | |
3005 | * pulled. | |
3006 | */ | |
3007 | static void | |
3008 | _scsih_block_io_to_children_attached_to_ex(struct MPT2SAS_ADAPTER *ioc, | |
3009 | struct _sas_node *sas_expander) | |
3010 | { | |
3011 | struct _sas_port *mpt2sas_port; | |
3012 | struct _sas_device *sas_device; | |
3013 | struct _sas_node *expander_sibling; | |
3014 | unsigned long flags; | |
3015 | ||
3016 | if (!sas_expander) | |
3017 | return; | |
3018 | ||
3019 | list_for_each_entry(mpt2sas_port, | |
3020 | &sas_expander->sas_port_list, port_list) { | |
3021 | if (mpt2sas_port->remote_identify.device_type == | |
3022 | SAS_END_DEVICE) { | |
3023 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
3024 | sas_device = | |
3025 | mpt2sas_scsih_sas_device_find_by_sas_address(ioc, | |
3026 | mpt2sas_port->remote_identify.sas_address); | |
09da0b32 | 3027 | if (sas_device) |
3028 | set_bit(sas_device->handle, | |
3029 | ioc->blocking_handles); | |
635374e7 | 3030 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); |
635374e7 EM |
3031 | } |
3032 | } | |
3033 | ||
3034 | list_for_each_entry(mpt2sas_port, | |
3035 | &sas_expander->sas_port_list, port_list) { | |
3036 | ||
3037 | if (mpt2sas_port->remote_identify.device_type == | |
7f6f794d | 3038 | SAS_EDGE_EXPANDER_DEVICE || |
635374e7 | 3039 | mpt2sas_port->remote_identify.device_type == |
7f6f794d | 3040 | SAS_FANOUT_EXPANDER_DEVICE) { |
635374e7 EM |
3041 | expander_sibling = |
3042 | mpt2sas_scsih_expander_find_by_sas_address( | |
3043 | ioc, mpt2sas_port->remote_identify.sas_address); | |
635374e7 EM |
3044 | _scsih_block_io_to_children_attached_to_ex(ioc, |
3045 | expander_sibling); | |
3046 | } | |
3047 | } | |
3048 | } | |
3049 | ||
3050 | /** | |
3051 | * _scsih_block_io_to_children_attached_directly | |
3052 | * @ioc: per adapter object | |
3053 | * @event_data: topology change event data | |
3054 | * | |
3055 | * This routine set sdev state to SDEV_BLOCK for all devices | |
3056 | * direct attached during device pull. | |
3057 | */ | |
3058 | static void | |
3059 | _scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc, | |
3060 | Mpi2EventDataSasTopologyChangeList_t *event_data) | |
3061 | { | |
3062 | int i; | |
3063 | u16 handle; | |
3064 | u16 reason_code; | |
3065 | u8 phy_number; | |
3066 | ||
3067 | for (i = 0; i < event_data->NumEntries; i++) { | |
3068 | handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); | |
3069 | if (!handle) | |
3070 | continue; | |
3071 | phy_number = event_data->StartPhyNum + i; | |
3072 | reason_code = event_data->PHY[i].PhyStatus & | |
3073 | MPI2_EVENT_SAS_TOPO_RC_MASK; | |
3074 | if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING) | |
3075 | _scsih_block_io_device(ioc, handle); | |
3076 | } | |
3077 | } | |
3078 | ||
77e63ed4 KD |
3079 | /** |
3080 | * _scsih_tm_tr_send - send task management request | |
3081 | * @ioc: per adapter object | |
3082 | * @handle: device handle | |
3083 | * Context: interrupt time. | |
3084 | * | |
25985edc | 3085 | * This code is to initiate the device removal handshake protocol |
77e63ed4 KD |
3086 | * with controller firmware. This function will issue target reset |
3087 | * using high priority request queue. It will send a sas iounit | |
25985edc | 3088 | * control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion. |
77e63ed4 KD |
3089 | * |
3090 | * This is designed to send muliple task management request at the same | |
3091 | * time to the fifo. If the fifo is full, we will append the request, | |
3092 | * and process it in a future completion. | |
3093 | */ | |
3094 | static void | |
3095 | _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle) | |
3096 | { | |
3097 | Mpi2SCSITaskManagementRequest_t *mpi_request; | |
77e63ed4 KD |
3098 | u16 smid; |
3099 | struct _sas_device *sas_device; | |
f3db032f | 3100 | struct MPT2SAS_TARGET *sas_target_priv_data = NULL; |
3101 | u64 sas_address = 0; | |
77e63ed4 KD |
3102 | unsigned long flags; |
3103 | struct _tr_list *delayed_tr; | |
f881cead | 3104 | u32 ioc_state; |
77e63ed4 | 3105 | |
f881cead | 3106 | if (ioc->remove_host) { |
3107 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been " | |
3108 | "removed: handle(0x%04x)\n", __func__, ioc->name, handle)); | |
3109 | return; | |
3110 | } else if (ioc->pci_error_recovery) { | |
3111 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci " | |
3112 | "error recovery: handle(0x%04x)\n", __func__, ioc->name, | |
3113 | handle)); | |
3114 | return; | |
3115 | } | |
3116 | ioc_state = mpt2sas_base_get_iocstate(ioc, 1); | |
3117 | if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { | |
3118 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not " | |
3119 | "operational: handle(0x%04x)\n", __func__, ioc->name, | |
3120 | handle)); | |
77e63ed4 KD |
3121 | return; |
3122 | } | |
3123 | ||
f3eedd69 KD |
3124 | /* if PD, then return */ |
3125 | if (test_bit(handle, ioc->pd_handles)) | |
3126 | return; | |
3127 | ||
77e63ed4 KD |
3128 | spin_lock_irqsave(&ioc->sas_device_lock, flags); |
3129 | sas_device = _scsih_sas_device_find_by_handle(ioc, handle); | |
f3eedd69 KD |
3130 | if (sas_device && sas_device->starget && |
3131 | sas_device->starget->hostdata) { | |
3132 | sas_target_priv_data = sas_device->starget->hostdata; | |
3133 | sas_target_priv_data->deleted = 1; | |
f3db032f | 3134 | sas_address = sas_device->sas_address; |
1278b11f KD |
3135 | } |
3136 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
77e63ed4 | 3137 | |
f3db032f | 3138 | if (sas_target_priv_data) { |
3139 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "setting delete flag: " | |
3140 | "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, handle, | |
3141 | (unsigned long long)sas_address)); | |
39af7a98 | 3142 | _scsih_ublock_io_device(ioc, sas_address); |
918134ef | 3143 | sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE; |
f3db032f | 3144 | } |
3145 | ||
77e63ed4 KD |
3146 | smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx); |
3147 | if (!smid) { | |
3148 | delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC); | |
3149 | if (!delayed_tr) | |
3150 | return; | |
3151 | INIT_LIST_HEAD(&delayed_tr->list); | |
3152 | delayed_tr->handle = handle; | |
1278b11f | 3153 | list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list); |
a28eb222 | 3154 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT |
1278b11f KD |
3155 | "DELAYED:tr:handle(0x%04x), (open)\n", |
3156 | ioc->name, handle)); | |
3157 | return; | |
77e63ed4 KD |
3158 | } |
3159 | ||
1278b11f KD |
3160 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_send:handle(0x%04x), " |
3161 | "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid, | |
3162 | ioc->tm_tr_cb_idx)); | |
77e63ed4 KD |
3163 | mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); |
3164 | memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t)); | |
3165 | mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; | |
3166 | mpi_request->DevHandle = cpu_to_le16(handle); | |
3167 | mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET; | |
77e63ed4 KD |
3168 | mpt2sas_base_put_smid_hi_priority(ioc, smid); |
3169 | } | |
3170 | ||
3171 | ||
3172 | ||
3173 | /** | |
3174 | * _scsih_sas_control_complete - completion routine | |
3175 | * @ioc: per adapter object | |
3176 | * @smid: system request message index | |
3177 | * @msix_index: MSIX table index supplied by the OS | |
3178 | * @reply: reply message frame(lower 32bit addr) | |
3179 | * Context: interrupt time. | |
3180 | * | |
25985edc | 3181 | * This is the sas iounit control completion routine. |
77e63ed4 | 3182 | * This code is part of the code to initiate the device removal |
25985edc | 3183 | * handshake protocol with controller firmware. |
77e63ed4 KD |
3184 | * |
3185 | * Return 1 meaning mf should be freed from _base_interrupt | |
3186 | * 0 means the mf is freed from this function. | |
3187 | */ | |
3188 | static u8 | |
3189 | _scsih_sas_control_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, | |
3190 | u8 msix_index, u32 reply) | |
3191 | { | |
77e63ed4 KD |
3192 | Mpi2SasIoUnitControlReply_t *mpi_reply = |
3193 | mpt2sas_base_get_reply_virt_addr(ioc, reply); | |
298c794d | 3194 | if (likely(mpi_reply)) { |
3195 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT | |
3196 | "sc_complete:handle(0x%04x), (open) " | |
3197 | "smid(%d), ioc_status(0x%04x), loginfo(0x%08x)\n", | |
3198 | ioc->name, le16_to_cpu(mpi_reply->DevHandle), smid, | |
3199 | le16_to_cpu(mpi_reply->IOCStatus), | |
3200 | le32_to_cpu(mpi_reply->IOCLogInfo))); | |
3201 | } else { | |
3202 | printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n", | |
3203 | ioc->name, __FILE__, __LINE__, __func__); | |
3204 | } | |
77e63ed4 KD |
3205 | return 1; |
3206 | } | |
3207 | ||
f3eedd69 KD |
3208 | /** |
3209 | * _scsih_tm_tr_volume_send - send target reset request for volumes | |
3210 | * @ioc: per adapter object | |
3211 | * @handle: device handle | |
3212 | * Context: interrupt time. | |
3213 | * | |
3214 | * This is designed to send muliple task management request at the same | |
3215 | * time to the fifo. If the fifo is full, we will append the request, | |
3216 | * and process it in a future completion. | |
3217 | */ | |
3218 | static void | |
3219 | _scsih_tm_tr_volume_send(struct MPT2SAS_ADAPTER *ioc, u16 handle) | |
3220 | { | |
3221 | Mpi2SCSITaskManagementRequest_t *mpi_request; | |
3222 | u16 smid; | |
3223 | struct _tr_list *delayed_tr; | |
3224 | ||
3cb5469a EM |
3225 | if (ioc->shost_recovery || ioc->remove_host || |
3226 | ioc->pci_error_recovery) { | |
f3eedd69 KD |
3227 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in " |
3228 | "progress!\n", __func__, ioc->name)); | |
3229 | return; | |
3230 | } | |
3231 | ||
3232 | smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_volume_cb_idx); | |
3233 | if (!smid) { | |
3234 | delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC); | |
3235 | if (!delayed_tr) | |
3236 | return; | |
3237 | INIT_LIST_HEAD(&delayed_tr->list); | |
3238 | delayed_tr->handle = handle; | |
3239 | list_add_tail(&delayed_tr->list, &ioc->delayed_tr_volume_list); | |
3240 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT | |
3241 | "DELAYED:tr:handle(0x%04x), (open)\n", | |
3242 | ioc->name, handle)); | |
3243 | return; | |
3244 | } | |
3245 | ||
3246 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_send:handle(0x%04x), " | |
3247 | "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid, | |
3248 | ioc->tm_tr_volume_cb_idx)); | |
3249 | mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); | |
3250 | memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t)); | |
3251 | mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT; | |
3252 | mpi_request->DevHandle = cpu_to_le16(handle); | |
3253 | mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET; | |
3254 | mpt2sas_base_put_smid_hi_priority(ioc, smid); | |
3255 | } | |
3256 | ||
3257 | /** | |
3258 | * _scsih_tm_volume_tr_complete - target reset completion | |
3259 | * @ioc: per adapter object | |
3260 | * @smid: system request message index | |
3261 | * @msix_index: MSIX table index supplied by the OS | |
3262 | * @reply: reply message frame(lower 32bit addr) | |
3263 | * Context: interrupt time. | |
3264 | * | |
3265 | * Return 1 meaning mf should be freed from _base_interrupt | |
3266 | * 0 means the mf is freed from this function. | |
3267 | */ | |
3268 | static u8 | |
3269 | _scsih_tm_volume_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, | |
3270 | u8 msix_index, u32 reply) | |
3271 | { | |
3272 | u16 handle; | |
3273 | Mpi2SCSITaskManagementRequest_t *mpi_request_tm; | |
3274 | Mpi2SCSITaskManagementReply_t *mpi_reply = | |
3275 | mpt2sas_base_get_reply_virt_addr(ioc, reply); | |
3276 | ||
3cb5469a EM |
3277 | if (ioc->shost_recovery || ioc->remove_host || |
3278 | ioc->pci_error_recovery) { | |
f3eedd69 KD |
3279 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in " |
3280 | "progress!\n", __func__, ioc->name)); | |
3281 | return 1; | |
3282 | } | |
298c794d | 3283 | if (unlikely(!mpi_reply)) { |
3284 | printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n", | |
3285 | ioc->name, __FILE__, __LINE__, __func__); | |
3286 | return 1; | |
3287 | } | |
f3eedd69 KD |
3288 | mpi_request_tm = mpt2sas_base_get_msg_frame(ioc, smid); |
3289 | handle = le16_to_cpu(mpi_request_tm->DevHandle); | |
3290 | if (handle != le16_to_cpu(mpi_reply->DevHandle)) { | |
3291 | dewtprintk(ioc, printk("spurious interrupt: " | |
3292 | "handle(0x%04x:0x%04x), smid(%d)!!!\n", handle, | |
3293 | le16_to_cpu(mpi_reply->DevHandle), smid)); | |
3294 | return 0; | |
3295 | } | |
3296 | ||
3297 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT | |
3298 | "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), " | |
3299 | "loginfo(0x%08x), completed(%d)\n", ioc->name, | |
3300 | handle, smid, le16_to_cpu(mpi_reply->IOCStatus), | |
3301 | le32_to_cpu(mpi_reply->IOCLogInfo), | |
3302 | le32_to_cpu(mpi_reply->TerminationCount))); | |
3303 | ||
3304 | return _scsih_check_for_pending_tm(ioc, smid); | |
3305 | } | |
3306 | ||
77e63ed4 KD |
3307 | /** |
3308 | * _scsih_tm_tr_complete - | |
3309 | * @ioc: per adapter object | |
3310 | * @smid: system request message index | |
3311 | * @msix_index: MSIX table index supplied by the OS | |
3312 | * @reply: reply message frame(lower 32bit addr) | |
3313 | * Context: interrupt time. | |
3314 | * | |
3315 | * This is the target reset completion routine. | |
3316 | * This code is part of the code to initiate the device removal | |
25985edc LDM |
3317 | * handshake protocol with controller firmware. |
3318 | * It will send a sas iounit control request (MPI2_SAS_OP_REMOVE_DEVICE) | |
77e63ed4 KD |
3319 | * |
3320 | * Return 1 meaning mf should be freed from _base_interrupt | |
3321 | * 0 means the mf is freed from this function. | |
3322 | */ | |
3323 | static u8 | |
3324 | _scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, | |
3325 | u32 reply) | |
3326 | { | |
77e63ed4 | 3327 | u16 handle; |
1278b11f | 3328 | Mpi2SCSITaskManagementRequest_t *mpi_request_tm; |
77e63ed4 KD |
3329 | Mpi2SCSITaskManagementReply_t *mpi_reply = |
3330 | mpt2sas_base_get_reply_virt_addr(ioc, reply); | |
3331 | Mpi2SasIoUnitControlRequest_t *mpi_request; | |
3332 | u16 smid_sas_ctrl; | |
f881cead | 3333 | u32 ioc_state; |
77e63ed4 | 3334 | |
f881cead | 3335 | if (ioc->remove_host) { |
3336 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been " | |
3337 | "removed\n", __func__, ioc->name)); | |
3338 | return 1; | |
3339 | } else if (ioc->pci_error_recovery) { | |
3340 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci " | |
3341 | "error recovery\n", __func__, ioc->name)); | |
3342 | return 1; | |
3343 | } | |
3344 | ioc_state = mpt2sas_base_get_iocstate(ioc, 1); | |
3345 | if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { | |
3346 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not " | |
3347 | "operational\n", __func__, ioc->name)); | |
1278b11f | 3348 | return 1; |
77e63ed4 | 3349 | } |
298c794d | 3350 | if (unlikely(!mpi_reply)) { |
3351 | printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n", | |
3352 | ioc->name, __FILE__, __LINE__, __func__); | |
3353 | return 1; | |
3354 | } | |
1278b11f KD |
3355 | mpi_request_tm = mpt2sas_base_get_msg_frame(ioc, smid); |
3356 | handle = le16_to_cpu(mpi_request_tm->DevHandle); | |
3357 | if (handle != le16_to_cpu(mpi_reply->DevHandle)) { | |
3358 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "spurious interrupt: " | |
3359 | "handle(0x%04x:0x%04x), smid(%d)!!!\n", ioc->name, handle, | |
3360 | le16_to_cpu(mpi_reply->DevHandle), smid)); | |
3361 | return 0; | |
77e63ed4 KD |
3362 | } |
3363 | ||
1278b11f KD |
3364 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT |
3365 | "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), " | |
3366 | "loginfo(0x%08x), completed(%d)\n", ioc->name, | |
3367 | handle, smid, le16_to_cpu(mpi_reply->IOCStatus), | |
3368 | le32_to_cpu(mpi_reply->IOCLogInfo), | |
3369 | le32_to_cpu(mpi_reply->TerminationCount))); | |
3370 | ||
77e63ed4 KD |
3371 | smid_sas_ctrl = mpt2sas_base_get_smid(ioc, ioc->tm_sas_control_cb_idx); |
3372 | if (!smid_sas_ctrl) { | |
3373 | printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", | |
3374 | ioc->name, __func__); | |
1278b11f | 3375 | return 1; |
77e63ed4 KD |
3376 | } |
3377 | ||
1278b11f KD |
3378 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sc_send:handle(0x%04x), " |
3379 | "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid_sas_ctrl, | |
3380 | ioc->tm_sas_control_cb_idx)); | |
77e63ed4 KD |
3381 | mpi_request = mpt2sas_base_get_msg_frame(ioc, smid_sas_ctrl); |
3382 | memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t)); | |
3383 | mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL; | |
3384 | mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE; | |
1278b11f | 3385 | mpi_request->DevHandle = mpi_request_tm->DevHandle; |
77e63ed4 | 3386 | mpt2sas_base_put_smid_default(ioc, smid_sas_ctrl); |
1278b11f | 3387 | |
f3eedd69 KD |
3388 | return _scsih_check_for_pending_tm(ioc, smid); |
3389 | } | |
3390 | ||
3391 | /** | |
3392 | * _scsih_check_for_pending_tm - check for pending task management | |
3393 | * @ioc: per adapter object | |
3394 | * @smid: system request message index | |
3395 | * | |
3396 | * This will check delayed target reset list, and feed the | |
3397 | * next reqeust. | |
3398 | * | |
3399 | * Return 1 meaning mf should be freed from _base_interrupt | |
3400 | * 0 means the mf is freed from this function. | |
3401 | */ | |
3402 | static u8 | |
3403 | _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid) | |
3404 | { | |
3405 | struct _tr_list *delayed_tr; | |
3406 | ||
3407 | if (!list_empty(&ioc->delayed_tr_volume_list)) { | |
3408 | delayed_tr = list_entry(ioc->delayed_tr_volume_list.next, | |
3409 | struct _tr_list, list); | |
3410 | mpt2sas_base_free_smid(ioc, smid); | |
3411 | _scsih_tm_tr_volume_send(ioc, delayed_tr->handle); | |
3412 | list_del(&delayed_tr->list); | |
3413 | kfree(delayed_tr); | |
3414 | return 0; | |
3415 | } | |
3416 | ||
1278b11f KD |
3417 | if (!list_empty(&ioc->delayed_tr_list)) { |
3418 | delayed_tr = list_entry(ioc->delayed_tr_list.next, | |
3419 | struct _tr_list, list); | |
3420 | mpt2sas_base_free_smid(ioc, smid); | |
3421 | _scsih_tm_tr_send(ioc, delayed_tr->handle); | |
3422 | list_del(&delayed_tr->list); | |
3423 | kfree(delayed_tr); | |
f3eedd69 | 3424 | return 0; |
1278b11f | 3425 | } |
f3eedd69 | 3426 | |
1278b11f | 3427 | return 1; |
77e63ed4 KD |
3428 | } |
3429 | ||
635374e7 EM |
3430 | /** |
3431 | * _scsih_check_topo_delete_events - sanity check on topo events | |
3432 | * @ioc: per adapter object | |
3433 | * @event_data: the event data payload | |
3434 | * | |
3435 | * This routine added to better handle cable breaker. | |
3436 | * | |
25985edc | 3437 | * This handles the case where driver receives multiple expander |
635374e7 EM |
3438 | * add and delete events in a single shot. When there is a delete event |
3439 | * the routine will void any pending add events waiting in the event queue. | |
3440 | * | |
3441 | * Return nothing. | |
3442 | */ | |
3443 | static void | |
3444 | _scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc, | |
3445 | Mpi2EventDataSasTopologyChangeList_t *event_data) | |
3446 | { | |
3447 | struct fw_event_work *fw_event; | |
3448 | Mpi2EventDataSasTopologyChangeList_t *local_event_data; | |
3449 | u16 expander_handle; | |
3450 | struct _sas_node *sas_expander; | |
3451 | unsigned long flags; | |
77e63ed4 KD |
3452 | int i, reason_code; |
3453 | u16 handle; | |
3454 | ||
3455 | for (i = 0 ; i < event_data->NumEntries; i++) { | |
77e63ed4 KD |
3456 | handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); |
3457 | if (!handle) | |
3458 | continue; | |
3459 | reason_code = event_data->PHY[i].PhyStatus & | |
3460 | MPI2_EVENT_SAS_TOPO_RC_MASK; | |
3461 | if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING) | |
3462 | _scsih_tm_tr_send(ioc, handle); | |
3463 | } | |
635374e7 EM |
3464 | |
3465 | expander_handle = le16_to_cpu(event_data->ExpanderDevHandle); | |
3466 | if (expander_handle < ioc->sas_hba.num_phys) { | |
3467 | _scsih_block_io_to_children_attached_directly(ioc, event_data); | |
3468 | return; | |
3469 | } | |
09da0b32 | 3470 | if (event_data->ExpStatus == |
3471 | MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING) { | |
3472 | /* put expander attached devices into blocking state */ | |
635374e7 EM |
3473 | spin_lock_irqsave(&ioc->sas_node_lock, flags); |
3474 | sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, | |
3475 | expander_handle); | |
635374e7 | 3476 | _scsih_block_io_to_children_attached_to_ex(ioc, sas_expander); |
09da0b32 | 3477 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); |
3478 | do { | |
3479 | handle = find_first_bit(ioc->blocking_handles, | |
3480 | ioc->facts.MaxDevHandle); | |
3481 | if (handle < ioc->facts.MaxDevHandle) | |
3482 | _scsih_block_io_device(ioc, handle); | |
3483 | } while (test_and_clear_bit(handle, ioc->blocking_handles)); | |
635374e7 EM |
3484 | } else if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_RESPONDING) |
3485 | _scsih_block_io_to_children_attached_directly(ioc, event_data); | |
3486 | ||
3487 | if (event_data->ExpStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING) | |
3488 | return; | |
3489 | ||
3490 | /* mark ignore flag for pending events */ | |
3491 | spin_lock_irqsave(&ioc->fw_event_lock, flags); | |
3492 | list_for_each_entry(fw_event, &ioc->fw_event_list, list) { | |
3493 | if (fw_event->event != MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST || | |
3494 | fw_event->ignore) | |
3495 | continue; | |
3496 | local_event_data = fw_event->event_data; | |
3497 | if (local_event_data->ExpStatus == | |
3498 | MPI2_EVENT_SAS_TOPO_ES_ADDED || | |
3499 | local_event_data->ExpStatus == | |
3500 | MPI2_EVENT_SAS_TOPO_ES_RESPONDING) { | |
3501 | if (le16_to_cpu(local_event_data->ExpanderDevHandle) == | |
3502 | expander_handle) { | |
eabb08ad | 3503 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT |
635374e7 EM |
3504 | "setting ignoring flag\n", ioc->name)); |
3505 | fw_event->ignore = 1; | |
3506 | } | |
3507 | } | |
3508 | } | |
3509 | spin_unlock_irqrestore(&ioc->fw_event_lock, flags); | |
3510 | } | |
3511 | ||
f3eedd69 KD |
3512 | /** |
3513 | * _scsih_set_volume_delete_flag - setting volume delete flag | |
3514 | * @ioc: per adapter object | |
3515 | * @handle: device handle | |
3516 | * | |
3517 | * This | |
3518 | * Return nothing. | |
3519 | */ | |
3520 | static void | |
3521 | _scsih_set_volume_delete_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle) | |
3522 | { | |
3523 | struct _raid_device *raid_device; | |
3524 | struct MPT2SAS_TARGET *sas_target_priv_data; | |
3525 | unsigned long flags; | |
3526 | ||
3527 | spin_lock_irqsave(&ioc->raid_device_lock, flags); | |
3528 | raid_device = _scsih_raid_device_find_by_handle(ioc, handle); | |
3529 | if (raid_device && raid_device->starget && | |
3530 | raid_device->starget->hostdata) { | |
3531 | sas_target_priv_data = | |
3532 | raid_device->starget->hostdata; | |
3533 | sas_target_priv_data->deleted = 1; | |
3534 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT | |
3535 | "setting delete flag: handle(0x%04x), " | |
3536 | "wwid(0x%016llx)\n", ioc->name, handle, | |
3537 | (unsigned long long) raid_device->wwid)); | |
3538 | } | |
3539 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); | |
3540 | } | |
3541 | ||
3542 | /** | |
3543 | * _scsih_set_volume_handle_for_tr - set handle for target reset to volume | |
3544 | * @handle: input handle | |
3545 | * @a: handle for volume a | |
3546 | * @b: handle for volume b | |
3547 | * | |
3548 | * IR firmware only supports two raid volumes. The purpose of this | |
3549 | * routine is to set the volume handle in either a or b. When the given | |
3550 | * input handle is non-zero, or when a and b have not been set before. | |
3551 | */ | |
3552 | static void | |
3553 | _scsih_set_volume_handle_for_tr(u16 handle, u16 *a, u16 *b) | |
3554 | { | |
3555 | if (!handle || handle == *a || handle == *b) | |
3556 | return; | |
3557 | if (!*a) | |
3558 | *a = handle; | |
3559 | else if (!*b) | |
3560 | *b = handle; | |
3561 | } | |
3562 | ||
3563 | /** | |
3564 | * _scsih_check_ir_config_unhide_events - check for UNHIDE events | |
3565 | * @ioc: per adapter object | |
3566 | * @event_data: the event data payload | |
3567 | * Context: interrupt time. | |
3568 | * | |
3569 | * This routine will send target reset to volume, followed by target | |
3570 | * resets to the PDs. This is called when a PD has been removed, or | |
3571 | * volume has been deleted or removed. When the target reset is sent | |
3572 | * to volume, the PD target resets need to be queued to start upon | |
3573 | * completion of the volume target reset. | |
3574 | * | |
3575 | * Return nothing. | |
3576 | */ | |
3577 | static void | |
3578 | _scsih_check_ir_config_unhide_events(struct MPT2SAS_ADAPTER *ioc, | |
3579 | Mpi2EventDataIrConfigChangeList_t *event_data) | |
3580 | { | |
3581 | Mpi2EventIrConfigElement_t *element; | |
3582 | int i; | |
3583 | u16 handle, volume_handle, a, b; | |
3584 | struct _tr_list *delayed_tr; | |
3585 | ||
3586 | a = 0; | |
3587 | b = 0; | |
3588 | ||
0bdccdb0 KD |
3589 | if (ioc->is_warpdrive) |
3590 | return; | |
3591 | ||
f3eedd69 KD |
3592 | /* Volume Resets for Deleted or Removed */ |
3593 | element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; | |
3594 | for (i = 0; i < event_data->NumElements; i++, element++) { | |
3595 | if (element->ReasonCode == | |
3596 | MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED || | |
3597 | element->ReasonCode == | |
3598 | MPI2_EVENT_IR_CHANGE_RC_REMOVED) { | |
3599 | volume_handle = le16_to_cpu(element->VolDevHandle); | |
3600 | _scsih_set_volume_delete_flag(ioc, volume_handle); | |
3601 | _scsih_set_volume_handle_for_tr(volume_handle, &a, &b); | |
3602 | } | |
3603 | } | |
3604 | ||
3605 | /* Volume Resets for UNHIDE events */ | |
3606 | element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; | |
3607 | for (i = 0; i < event_data->NumElements; i++, element++) { | |
3608 | if (le32_to_cpu(event_data->Flags) & | |
3609 | MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) | |
3610 | continue; | |
3611 | if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_UNHIDE) { | |
3612 | volume_handle = le16_to_cpu(element->VolDevHandle); | |
3613 | _scsih_set_volume_handle_for_tr(volume_handle, &a, &b); | |
3614 | } | |
3615 | } | |
3616 | ||
3617 | if (a) | |
3618 | _scsih_tm_tr_volume_send(ioc, a); | |
3619 | if (b) | |
3620 | _scsih_tm_tr_volume_send(ioc, b); | |
3621 | ||
3622 | /* PD target resets */ | |
3623 | element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; | |
3624 | for (i = 0; i < event_data->NumElements; i++, element++) { | |
3625 | if (element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_UNHIDE) | |
3626 | continue; | |
3627 | handle = le16_to_cpu(element->PhysDiskDevHandle); | |
3628 | volume_handle = le16_to_cpu(element->VolDevHandle); | |
3629 | clear_bit(handle, ioc->pd_handles); | |
3630 | if (!volume_handle) | |
3631 | _scsih_tm_tr_send(ioc, handle); | |
3632 | else if (volume_handle == a || volume_handle == b) { | |
3633 | delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC); | |
3634 | BUG_ON(!delayed_tr); | |
3635 | INIT_LIST_HEAD(&delayed_tr->list); | |
3636 | delayed_tr->handle = handle; | |
3637 | list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list); | |
3638 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT | |
3639 | "DELAYED:tr:handle(0x%04x), (open)\n", ioc->name, | |
3640 | handle)); | |
3641 | } else | |
3642 | _scsih_tm_tr_send(ioc, handle); | |
3643 | } | |
3644 | } | |
3645 | ||
3646 | ||
3647 | /** | |
3648 | * _scsih_check_volume_delete_events - set delete flag for volumes | |
3649 | * @ioc: per adapter object | |
3650 | * @event_data: the event data payload | |
3651 | * Context: interrupt time. | |
3652 | * | |
3653 | * This will handle the case when the cable connected to entire volume is | |
3654 | * pulled. We will take care of setting the deleted flag so normal IO will | |
3655 | * not be sent. | |
3656 | * | |
3657 | * Return nothing. | |
3658 | */ | |
3659 | static void | |
3660 | _scsih_check_volume_delete_events(struct MPT2SAS_ADAPTER *ioc, | |
3661 | Mpi2EventDataIrVolume_t *event_data) | |
3662 | { | |
3663 | u32 state; | |
3664 | ||
3665 | if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED) | |
3666 | return; | |
3667 | state = le32_to_cpu(event_data->NewValue); | |
3668 | if (state == MPI2_RAID_VOL_STATE_MISSING || state == | |
3669 | MPI2_RAID_VOL_STATE_FAILED) | |
3670 | _scsih_set_volume_delete_flag(ioc, | |
3671 | le16_to_cpu(event_data->VolDevHandle)); | |
3672 | } | |
3673 | ||
635374e7 EM |
3674 | /** |
3675 | * _scsih_flush_running_cmds - completing outstanding commands. | |
3676 | * @ioc: per adapter object | |
3677 | * | |
3678 | * The flushing out of all pending scmd commands following host reset, | |
3679 | * where all IO is dropped to the floor. | |
3680 | * | |
3681 | * Return nothing. | |
3682 | */ | |
3683 | static void | |
3684 | _scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc) | |
3685 | { | |
3686 | struct scsi_cmnd *scmd; | |
3687 | u16 smid; | |
3688 | u16 count = 0; | |
3689 | ||
595bb0bd | 3690 | for (smid = 1; smid <= ioc->scsiio_depth; smid++) { |
ec07a053 | 3691 | scmd = _scsih_scsi_lookup_get_clear(ioc, smid); |
635374e7 EM |
3692 | if (!scmd) |
3693 | continue; | |
3694 | count++; | |
3695 | mpt2sas_base_free_smid(ioc, smid); | |
3696 | scsi_dma_unmap(scmd); | |
3cb5469a EM |
3697 | if (ioc->pci_error_recovery) |
3698 | scmd->result = DID_NO_CONNECT << 16; | |
3699 | else | |
3700 | scmd->result = DID_RESET << 16; | |
635374e7 EM |
3701 | scmd->scsi_done(scmd); |
3702 | } | |
3703 | dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "completing %d cmds\n", | |
3704 | ioc->name, count)); | |
3705 | } | |
3706 | ||
3c621b3e EM |
3707 | /** |
3708 | * _scsih_setup_eedp - setup MPI request for EEDP transfer | |
3709 | * @scmd: pointer to scsi command object | |
3710 | * @mpi_request: pointer to the SCSI_IO reqest message frame | |
3711 | * | |
3712 | * Supporting protection 1 and 3. | |
3713 | * | |
3714 | * Returns nothing | |
3715 | */ | |
3716 | static void | |
3717 | _scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request) | |
3718 | { | |
3719 | u16 eedp_flags; | |
3720 | unsigned char prot_op = scsi_get_prot_op(scmd); | |
3721 | unsigned char prot_type = scsi_get_prot_type(scmd); | |
3722 | ||
d334aa79 | 3723 | if (prot_type == SCSI_PROT_DIF_TYPE0 || prot_op == SCSI_PROT_NORMAL) |
3c621b3e EM |
3724 | return; |
3725 | ||
3726 | if (prot_op == SCSI_PROT_READ_STRIP) | |
3727 | eedp_flags = MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP; | |
3728 | else if (prot_op == SCSI_PROT_WRITE_INSERT) | |
3729 | eedp_flags = MPI2_SCSIIO_EEDPFLAGS_INSERT_OP; | |
3730 | else | |
3731 | return; | |
3732 | ||
3c621b3e EM |
3733 | switch (prot_type) { |
3734 | case SCSI_PROT_DIF_TYPE1: | |
756aca7e | 3735 | case SCSI_PROT_DIF_TYPE2: |
3c621b3e EM |
3736 | |
3737 | /* | |
3738 | * enable ref/guard checking | |
3739 | * auto increment ref tag | |
3740 | */ | |
463217bf | 3741 | eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG | |
3c621b3e EM |
3742 | MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG | |
3743 | MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD; | |
3744 | mpi_request->CDB.EEDP32.PrimaryReferenceTag = | |
3745 | cpu_to_be32(scsi_get_lba(scmd)); | |
d334aa79 EM |
3746 | break; |
3747 | ||
3c621b3e EM |
3748 | case SCSI_PROT_DIF_TYPE3: |
3749 | ||
3750 | /* | |
3751 | * enable guard checking | |
3752 | */ | |
463217bf | 3753 | eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD; |
3c621b3e EM |
3754 | break; |
3755 | } | |
463217bf KD |
3756 | mpi_request->EEDPBlockSize = cpu_to_le32(scmd->device->sector_size); |
3757 | mpi_request->EEDPFlags = cpu_to_le16(eedp_flags); | |
3c621b3e EM |
3758 | } |
3759 | ||
3760 | /** | |
3761 | * _scsih_eedp_error_handling - return sense code for EEDP errors | |
3762 | * @scmd: pointer to scsi command object | |
3763 | * @ioc_status: ioc status | |
3764 | * | |
3765 | * Returns nothing | |
3766 | */ | |
3767 | static void | |
3768 | _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status) | |
3769 | { | |
3770 | u8 ascq; | |
3771 | u8 sk; | |
3772 | u8 host_byte; | |
3773 | ||
3774 | switch (ioc_status) { | |
3775 | case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: | |
3776 | ascq = 0x01; | |
3777 | break; | |
3778 | case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: | |
3779 | ascq = 0x02; | |
3780 | break; | |
3781 | case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: | |
3782 | ascq = 0x03; | |
3783 | break; | |
3784 | default: | |
3785 | ascq = 0x00; | |
3786 | break; | |
3787 | } | |
3788 | ||
3789 | if (scmd->sc_data_direction == DMA_TO_DEVICE) { | |
3790 | sk = ILLEGAL_REQUEST; | |
3791 | host_byte = DID_ABORT; | |
3792 | } else { | |
3793 | sk = ABORTED_COMMAND; | |
3794 | host_byte = DID_OK; | |
3795 | } | |
3796 | ||
3797 | scsi_build_sense_buffer(0, scmd->sense_buffer, sk, 0x10, ascq); | |
3798 | scmd->result = DRIVER_SENSE << 24 | (host_byte << 16) | | |
3799 | SAM_STAT_CHECK_CONDITION; | |
3800 | } | |
3801 | ||
0bdccdb0 KD |
3802 | /** |
3803 | * _scsih_scsi_direct_io_get - returns direct io flag | |
3804 | * @ioc: per adapter object | |
3805 | * @smid: system request message index | |
3806 | * | |
3807 | * Returns the smid stored scmd pointer. | |
3808 | */ | |
3809 | static inline u8 | |
3810 | _scsih_scsi_direct_io_get(struct MPT2SAS_ADAPTER *ioc, u16 smid) | |
3811 | { | |
3812 | return ioc->scsi_lookup[smid - 1].direct_io; | |
3813 | } | |
3814 | ||
3815 | /** | |
3816 | * _scsih_scsi_direct_io_set - sets direct io flag | |
3817 | * @ioc: per adapter object | |
3818 | * @smid: system request message index | |
3819 | * @direct_io: Zero or non-zero value to set in the direct_io flag | |
3820 | * | |
3821 | * Returns Nothing. | |
3822 | */ | |
3823 | static inline void | |
3824 | _scsih_scsi_direct_io_set(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 direct_io) | |
3825 | { | |
3826 | ioc->scsi_lookup[smid - 1].direct_io = direct_io; | |
3827 | } | |
3828 | ||
3829 | ||
3830 | /** | |
3831 | * _scsih_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O | |
3832 | * @ioc: per adapter object | |
3833 | * @scmd: pointer to scsi command object | |
3834 | * @raid_device: pointer to raid device data structure | |
3835 | * @mpi_request: pointer to the SCSI_IO reqest message frame | |
3836 | * @smid: system request message index | |
3837 | * | |
3838 | * Returns nothing | |
3839 | */ | |
3840 | static void | |
3841 | _scsih_setup_direct_io(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, | |
3842 | struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request, | |
3843 | u16 smid) | |
3844 | { | |
3845 | u32 v_lba, p_lba, stripe_off, stripe_unit, column, io_size; | |
3846 | u32 stripe_sz, stripe_exp; | |
ba96bd0b | 3847 | u8 num_pds, *cdb_ptr, i; |
0bdccdb0 | 3848 | u8 cdb0 = scmd->cmnd[0]; |
ba96bd0b | 3849 | u64 v_llba; |
0bdccdb0 KD |
3850 | |
3851 | /* | |
3852 | * Try Direct I/O to RAID memeber disks | |
3853 | */ | |
3854 | if (cdb0 == READ_16 || cdb0 == READ_10 || | |
3855 | cdb0 == WRITE_16 || cdb0 == WRITE_10) { | |
3856 | cdb_ptr = mpi_request->CDB.CDB32; | |
3857 | ||
3858 | if ((cdb0 < READ_16) || !(cdb_ptr[2] | cdb_ptr[3] | cdb_ptr[4] | |
3859 | | cdb_ptr[5])) { | |
ba96bd0b | 3860 | io_size = scsi_bufflen(scmd) >> |
3861 | raid_device->block_exponent; | |
3862 | i = (cdb0 < READ_16) ? 2 : 6; | |
0bdccdb0 | 3863 | /* get virtual lba */ |
ba96bd0b | 3864 | v_lba = be32_to_cpu(*(__be32 *)(&cdb_ptr[i])); |
0bdccdb0 KD |
3865 | |
3866 | if (((u64)v_lba + (u64)io_size - 1) <= | |
3867 | (u32)raid_device->max_lba) { | |
3868 | stripe_sz = raid_device->stripe_sz; | |
3869 | stripe_exp = raid_device->stripe_exponent; | |
3870 | stripe_off = v_lba & (stripe_sz - 1); | |
3871 | ||
3872 | /* Check whether IO falls within a stripe */ | |
3873 | if ((stripe_off + io_size) <= stripe_sz) { | |
3874 | num_pds = raid_device->num_pds; | |
3875 | p_lba = v_lba >> stripe_exp; | |
3876 | stripe_unit = p_lba / num_pds; | |
3877 | column = p_lba % num_pds; | |
3878 | p_lba = (stripe_unit << stripe_exp) + | |
3879 | stripe_off; | |
3880 | mpi_request->DevHandle = | |
3881 | cpu_to_le16(raid_device-> | |
3882 | pd_handle[column]); | |
ba96bd0b | 3883 | (*(__be32 *)(&cdb_ptr[i])) = |
3884 | cpu_to_be32(p_lba); | |
3885 | /* | |
3886 | * WD: To indicate this I/O is directI/O | |
3887 | */ | |
3888 | _scsih_scsi_direct_io_set(ioc, smid, 1); | |
3889 | } | |
3890 | } | |
3891 | } else { | |
3892 | io_size = scsi_bufflen(scmd) >> | |
3893 | raid_device->block_exponent; | |
3894 | /* get virtual lba */ | |
3895 | v_llba = be64_to_cpu(*(__be64 *)(&cdb_ptr[2])); | |
3896 | ||
3897 | if ((v_llba + (u64)io_size - 1) <= | |
3898 | raid_device->max_lba) { | |
3899 | stripe_sz = raid_device->stripe_sz; | |
3900 | stripe_exp = raid_device->stripe_exponent; | |
3901 | stripe_off = (u32) (v_llba & (stripe_sz - 1)); | |
3902 | ||
3903 | /* Check whether IO falls within a stripe */ | |
3904 | if ((stripe_off + io_size) <= stripe_sz) { | |
3905 | num_pds = raid_device->num_pds; | |
3906 | p_lba = (u32)(v_llba >> stripe_exp); | |
3907 | stripe_unit = p_lba / num_pds; | |
3908 | column = p_lba % num_pds; | |
3909 | p_lba = (stripe_unit << stripe_exp) + | |
3910 | stripe_off; | |
3911 | mpi_request->DevHandle = | |
3912 | cpu_to_le16(raid_device-> | |
3913 | pd_handle[column]); | |
3914 | (*(__be64 *)(&cdb_ptr[2])) = | |
3915 | cpu_to_be64((u64)p_lba); | |
0bdccdb0 KD |
3916 | /* |
3917 | * WD: To indicate this I/O is directI/O | |
3918 | */ | |
3919 | _scsih_scsi_direct_io_set(ioc, smid, 1); | |
3920 | } | |
3921 | } | |
3922 | } | |
3923 | } | |
3924 | } | |
3925 | ||
635374e7 | 3926 | /** |
d5d135b3 | 3927 | * _scsih_qcmd - main scsi request entry point |
635374e7 EM |
3928 | * @scmd: pointer to scsi command object |
3929 | * @done: function pointer to be invoked on completion | |
3930 | * | |
3931 | * The callback index is set inside `ioc->scsi_io_cb_idx`. | |
3932 | * | |
3933 | * Returns 0 on success. If there's a failure, return either: | |
3934 | * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or | |
3935 | * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full | |
3936 | */ | |
3937 | static int | |
f281233d | 3938 | _scsih_qcmd_lck(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *)) |
635374e7 EM |
3939 | { |
3940 | struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host); | |
3941 | struct MPT2SAS_DEVICE *sas_device_priv_data; | |
3942 | struct MPT2SAS_TARGET *sas_target_priv_data; | |
0bdccdb0 | 3943 | struct _raid_device *raid_device; |
635374e7 EM |
3944 | Mpi2SCSIIORequest_t *mpi_request; |
3945 | u32 mpi_control; | |
3946 | u16 smid; | |
635374e7 EM |
3947 | |
3948 | scmd->scsi_done = done; | |
3949 | sas_device_priv_data = scmd->device->hostdata; | |
130b958a | 3950 | if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { |
635374e7 EM |
3951 | scmd->result = DID_NO_CONNECT << 16; |
3952 | scmd->scsi_done(scmd); | |
3953 | return 0; | |
3954 | } | |
3955 | ||
7821578c | 3956 | if (ioc->pci_error_recovery || ioc->remove_host) { |
3cb5469a EM |
3957 | scmd->result = DID_NO_CONNECT << 16; |
3958 | scmd->scsi_done(scmd); | |
3959 | return 0; | |
3960 | } | |
3961 | ||
635374e7 | 3962 | sas_target_priv_data = sas_device_priv_data->sas_target; |
130b958a KD |
3963 | /* invalid device handle */ |
3964 | if (sas_target_priv_data->handle == MPT2SAS_INVALID_DEVICE_HANDLE) { | |
635374e7 EM |
3965 | scmd->result = DID_NO_CONNECT << 16; |
3966 | scmd->scsi_done(scmd); | |
3967 | return 0; | |
3968 | } | |
3969 | ||
130b958a KD |
3970 | /* host recovery or link resets sent via IOCTLs */ |
3971 | if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress) | |
635374e7 | 3972 | return SCSI_MLQUEUE_HOST_BUSY; |
65155b37 | 3973 | /* device busy with task management */ |
130b958a KD |
3974 | else if (sas_device_priv_data->block || sas_target_priv_data->tm_busy) |
3975 | return SCSI_MLQUEUE_DEVICE_BUSY; | |
3976 | /* device has been deleted */ | |
3977 | else if (sas_target_priv_data->deleted) { | |
3978 | scmd->result = DID_NO_CONNECT << 16; | |
3979 | scmd->scsi_done(scmd); | |
3980 | return 0; | |
3981 | } | |
635374e7 EM |
3982 | |
3983 | if (scmd->sc_data_direction == DMA_FROM_DEVICE) | |
3984 | mpi_control = MPI2_SCSIIO_CONTROL_READ; | |
3985 | else if (scmd->sc_data_direction == DMA_TO_DEVICE) | |
3986 | mpi_control = MPI2_SCSIIO_CONTROL_WRITE; | |
3987 | else | |
3988 | mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER; | |
3989 | ||
3990 | /* set tags */ | |
3991 | if (!(sas_device_priv_data->flags & MPT_DEVICE_FLAGS_INIT)) { | |
3992 | if (scmd->device->tagged_supported) { | |
3993 | if (scmd->device->ordered_tags) | |
3994 | mpi_control |= MPI2_SCSIIO_CONTROL_ORDEREDQ; | |
3995 | else | |
3996 | mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; | |
3997 | } else | |
3998 | /* MPI Revision I (UNIT = 0xA) - removed MPI2_SCSIIO_CONTROL_UNTAGGED */ | |
3999 | /* mpi_control |= MPI2_SCSIIO_CONTROL_UNTAGGED; | |
4000 | */ | |
4001 | mpi_control |= (0x500); | |
4002 | ||
4003 | } else | |
4004 | mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; | |
0bdccdb0 KD |
4005 | /* Make sure Device is not raid volume. |
4006 | * We do not expose raid functionality to upper layer for warpdrive. | |
4007 | */ | |
4008 | if (!ioc->is_warpdrive && !_scsih_is_raid(&scmd->device->sdev_gendev) && | |
d334aa79 | 4009 | sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32) |
635374e7 EM |
4010 | mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON; |
4011 | ||
595bb0bd | 4012 | smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd); |
635374e7 EM |
4013 | if (!smid) { |
4014 | printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", | |
4015 | ioc->name, __func__); | |
4016 | goto out; | |
4017 | } | |
4018 | mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); | |
4019 | memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t)); | |
3c621b3e | 4020 | _scsih_setup_eedp(scmd, mpi_request); |
d334aa79 EM |
4021 | if (scmd->cmd_len == 32) |
4022 | mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT; | |
635374e7 EM |
4023 | mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; |
4024 | if (sas_device_priv_data->sas_target->flags & | |
4025 | MPT_TARGET_FLAGS_RAID_COMPONENT) | |
4026 | mpi_request->Function = MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH; | |
4027 | else | |
4028 | mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST; | |
4029 | mpi_request->DevHandle = | |
4030 | cpu_to_le16(sas_device_priv_data->sas_target->handle); | |
4031 | mpi_request->DataLength = cpu_to_le32(scsi_bufflen(scmd)); | |
4032 | mpi_request->Control = cpu_to_le32(mpi_control); | |
4033 | mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len); | |
4034 | mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR; | |
4035 | mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE; | |
4036 | mpi_request->SenseBufferLowAddress = | |
ec9472c7 | 4037 | mpt2sas_base_get_sense_buffer_dma(ioc, smid); |
635374e7 EM |
4038 | mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4; |
4039 | mpi_request->SGLFlags = cpu_to_le16(MPI2_SCSIIO_SGLFLAGS_TYPE_MPI + | |
4040 | MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR); | |
7b936b02 KD |
4041 | mpi_request->VF_ID = 0; /* TODO */ |
4042 | mpi_request->VP_ID = 0; | |
635374e7 EM |
4043 | int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *) |
4044 | mpi_request->LUN); | |
4045 | memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len); | |
4046 | ||
4047 | if (!mpi_request->DataLength) { | |
4048 | mpt2sas_base_build_zero_len_sge(ioc, &mpi_request->SGL); | |
4049 | } else { | |
4050 | if (_scsih_build_scatter_gather(ioc, scmd, smid)) { | |
4051 | mpt2sas_base_free_smid(ioc, smid); | |
4052 | goto out; | |
4053 | } | |
4054 | } | |
4055 | ||
0bdccdb0 KD |
4056 | raid_device = sas_target_priv_data->raid_device; |
4057 | if (raid_device && raid_device->direct_io_enabled) | |
4058 | _scsih_setup_direct_io(ioc, scmd, raid_device, mpi_request, | |
4059 | smid); | |
4060 | ||
58287fd5 KD |
4061 | if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)) |
4062 | mpt2sas_base_put_smid_scsi_io(ioc, smid, | |
0bdccdb0 | 4063 | le16_to_cpu(mpi_request->DevHandle)); |
58287fd5 KD |
4064 | else |
4065 | mpt2sas_base_put_smid_default(ioc, smid); | |
635374e7 EM |
4066 | return 0; |
4067 | ||
4068 | out: | |
4069 | return SCSI_MLQUEUE_HOST_BUSY; | |
4070 | } | |
4071 | ||
f281233d JG |
4072 | static DEF_SCSI_QCMD(_scsih_qcmd) |
4073 | ||
635374e7 EM |
4074 | /** |
4075 | * _scsih_normalize_sense - normalize descriptor and fixed format sense data | |
4076 | * @sense_buffer: sense data returned by target | |
4077 | * @data: normalized skey/asc/ascq | |
4078 | * | |
4079 | * Return nothing. | |
4080 | */ | |
4081 | static void | |
4082 | _scsih_normalize_sense(char *sense_buffer, struct sense_info *data) | |
4083 | { | |
4084 | if ((sense_buffer[0] & 0x7F) >= 0x72) { | |
4085 | /* descriptor format */ | |
4086 | data->skey = sense_buffer[1] & 0x0F; | |
4087 | data->asc = sense_buffer[2]; | |
4088 | data->ascq = sense_buffer[3]; | |
4089 | } else { | |
4090 | /* fixed format */ | |
4091 | data->skey = sense_buffer[2] & 0x0F; | |
4092 | data->asc = sense_buffer[12]; | |
4093 | data->ascq = sense_buffer[13]; | |
4094 | } | |
4095 | } | |
4096 | ||
4097 | #ifdef CONFIG_SCSI_MPT2SAS_LOGGING | |
4098 | /** | |
25985edc | 4099 | * _scsih_scsi_ioc_info - translated non-successful SCSI_IO request |
635374e7 EM |
4100 | * @ioc: per adapter object |
4101 | * @scmd: pointer to scsi command object | |
4102 | * @mpi_reply: reply mf payload returned from firmware | |
4103 | * | |
4104 | * scsi_status - SCSI Status code returned from target device | |
4105 | * scsi_state - state info associated with SCSI_IO determined by ioc | |
4106 | * ioc_status - ioc supplied status info | |
4107 | * | |
4108 | * Return nothing. | |
4109 | */ | |
4110 | static void | |
4111 | _scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, | |
4112 | Mpi2SCSIIOReply_t *mpi_reply, u16 smid) | |
4113 | { | |
4114 | u32 response_info; | |
4115 | u8 *response_bytes; | |
4116 | u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & | |
4117 | MPI2_IOCSTATUS_MASK; | |
4118 | u8 scsi_state = mpi_reply->SCSIState; | |
4119 | u8 scsi_status = mpi_reply->SCSIStatus; | |
4120 | char *desc_ioc_state = NULL; | |
4121 | char *desc_scsi_status = NULL; | |
4122 | char *desc_scsi_state = ioc->tmp_string; | |
be9e8cd7 | 4123 | u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo); |
7fbae67a KD |
4124 | struct _sas_device *sas_device = NULL; |
4125 | unsigned long flags; | |
8e864a81 KD |
4126 | struct scsi_target *starget = scmd->device->sdev_target; |
4127 | struct MPT2SAS_TARGET *priv_target = starget->hostdata; | |
0bdccdb0 | 4128 | char *device_str = NULL; |
8e864a81 KD |
4129 | |
4130 | if (!priv_target) | |
4131 | return; | |
be9e8cd7 | 4132 | |
0bdccdb0 KD |
4133 | if (ioc->hide_ir_msg) |
4134 | device_str = "WarpDrive"; | |
4135 | else | |
4136 | device_str = "volume"; | |
4137 | ||
be9e8cd7 KD |
4138 | if (log_info == 0x31170000) |
4139 | return; | |
635374e7 EM |
4140 | |
4141 | switch (ioc_status) { | |
4142 | case MPI2_IOCSTATUS_SUCCESS: | |
4143 | desc_ioc_state = "success"; | |
4144 | break; | |
4145 | case MPI2_IOCSTATUS_INVALID_FUNCTION: | |
4146 | desc_ioc_state = "invalid function"; | |
4147 | break; | |
4148 | case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: | |
4149 | desc_ioc_state = "scsi recovered error"; | |
4150 | break; | |
4151 | case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE: | |
4152 | desc_ioc_state = "scsi invalid dev handle"; | |
4153 | break; | |
4154 | case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: | |
4155 | desc_ioc_state = "scsi device not there"; | |
4156 | break; | |
4157 | case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: | |
4158 | desc_ioc_state = "scsi data overrun"; | |
4159 | break; | |
4160 | case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: | |
4161 | desc_ioc_state = "scsi data underrun"; | |
4162 | break; | |
4163 | case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: | |
4164 | desc_ioc_state = "scsi io data error"; | |
4165 | break; | |
4166 | case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: | |
4167 | desc_ioc_state = "scsi protocol error"; | |
4168 | break; | |
4169 | case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: | |
4170 | desc_ioc_state = "scsi task terminated"; | |
4171 | break; | |
4172 | case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: | |
4173 | desc_ioc_state = "scsi residual mismatch"; | |
4174 | break; | |
4175 | case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: | |
4176 | desc_ioc_state = "scsi task mgmt failed"; | |
4177 | break; | |
4178 | case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: | |
4179 | desc_ioc_state = "scsi ioc terminated"; | |
4180 | break; | |
4181 | case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: | |
4182 | desc_ioc_state = "scsi ext terminated"; | |
4183 | break; | |
3c621b3e EM |
4184 | case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: |
4185 | desc_ioc_state = "eedp guard error"; | |
4186 | break; | |
4187 | case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: | |
4188 | desc_ioc_state = "eedp ref tag error"; | |
4189 | break; | |
4190 | case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: | |
4191 | desc_ioc_state = "eedp app tag error"; | |
4192 | break; | |
635374e7 EM |
4193 | default: |
4194 | desc_ioc_state = "unknown"; | |
4195 | break; | |
4196 | } | |
4197 | ||
4198 | switch (scsi_status) { | |
4199 | case MPI2_SCSI_STATUS_GOOD: | |
4200 | desc_scsi_status = "good"; | |
4201 | break; | |
4202 | case MPI2_SCSI_STATUS_CHECK_CONDITION: | |
4203 | desc_scsi_status = "check condition"; | |
4204 | break; | |
4205 | case MPI2_SCSI_STATUS_CONDITION_MET: | |
4206 | desc_scsi_status = "condition met"; | |
4207 | break; | |
4208 | case MPI2_SCSI_STATUS_BUSY: | |
4209 | desc_scsi_status = "busy"; | |
4210 | break; | |
4211 | case MPI2_SCSI_STATUS_INTERMEDIATE: | |
4212 | desc_scsi_status = "intermediate"; | |
4213 | break; | |
4214 | case MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET: | |
4215 | desc_scsi_status = "intermediate condmet"; | |
4216 | break; | |
4217 | case MPI2_SCSI_STATUS_RESERVATION_CONFLICT: | |
4218 | desc_scsi_status = "reservation conflict"; | |
4219 | break; | |
4220 | case MPI2_SCSI_STATUS_COMMAND_TERMINATED: | |
4221 | desc_scsi_status = "command terminated"; | |
4222 | break; | |
4223 | case MPI2_SCSI_STATUS_TASK_SET_FULL: | |
4224 | desc_scsi_status = "task set full"; | |
4225 | break; | |
4226 | case MPI2_SCSI_STATUS_ACA_ACTIVE: | |
4227 | desc_scsi_status = "aca active"; | |
4228 | break; | |
4229 | case MPI2_SCSI_STATUS_TASK_ABORTED: | |
4230 | desc_scsi_status = "task aborted"; | |
4231 | break; | |
4232 | default: | |
4233 | desc_scsi_status = "unknown"; | |
4234 | break; | |
4235 | } | |
4236 | ||
4237 | desc_scsi_state[0] = '\0'; | |
4238 | if (!scsi_state) | |
4239 | desc_scsi_state = " "; | |
4240 | if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) | |
4241 | strcat(desc_scsi_state, "response info "); | |
4242 | if (scsi_state & MPI2_SCSI_STATE_TERMINATED) | |
4243 | strcat(desc_scsi_state, "state terminated "); | |
4244 | if (scsi_state & MPI2_SCSI_STATE_NO_SCSI_STATUS) | |
4245 | strcat(desc_scsi_state, "no status "); | |
4246 | if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_FAILED) | |
4247 | strcat(desc_scsi_state, "autosense failed "); | |
4248 | if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) | |
4249 | strcat(desc_scsi_state, "autosense valid "); | |
4250 | ||
4251 | scsi_print_command(scmd); | |
7fbae67a | 4252 | |
8e864a81 | 4253 | if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) { |
0bdccdb0 KD |
4254 | printk(MPT2SAS_WARN_FMT "\t%s wwid(0x%016llx)\n", ioc->name, |
4255 | device_str, (unsigned long long)priv_target->sas_address); | |
8e864a81 KD |
4256 | } else { |
4257 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
4258 | sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, | |
4259 | priv_target->sas_address); | |
4260 | if (sas_device) { | |
4261 | printk(MPT2SAS_WARN_FMT "\tsas_address(0x%016llx), " | |
4262 | "phy(%d)\n", ioc->name, sas_device->sas_address, | |
4263 | sas_device->phy); | |
4264 | printk(MPT2SAS_WARN_FMT | |
4265 | "\tenclosure_logical_id(0x%016llx), slot(%d)\n", | |
4266 | ioc->name, sas_device->enclosure_logical_id, | |
4267 | sas_device->slot); | |
4268 | } | |
4269 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
7fbae67a | 4270 | } |
7fbae67a | 4271 | |
8e864a81 KD |
4272 | printk(MPT2SAS_WARN_FMT "\thandle(0x%04x), ioc_status(%s)(0x%04x), " |
4273 | "smid(%d)\n", ioc->name, le16_to_cpu(mpi_reply->DevHandle), | |
4274 | desc_ioc_state, ioc_status, smid); | |
635374e7 EM |
4275 | printk(MPT2SAS_WARN_FMT "\trequest_len(%d), underflow(%d), " |
4276 | "resid(%d)\n", ioc->name, scsi_bufflen(scmd), scmd->underflow, | |
4277 | scsi_get_resid(scmd)); | |
4278 | printk(MPT2SAS_WARN_FMT "\ttag(%d), transfer_count(%d), " | |
4279 | "sc->result(0x%08x)\n", ioc->name, le16_to_cpu(mpi_reply->TaskTag), | |
4280 | le32_to_cpu(mpi_reply->TransferCount), scmd->result); | |
4281 | printk(MPT2SAS_WARN_FMT "\tscsi_status(%s)(0x%02x), " | |
4282 | "scsi_state(%s)(0x%02x)\n", ioc->name, desc_scsi_status, | |
4283 | scsi_status, desc_scsi_state, scsi_state); | |
4284 | ||
4285 | if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) { | |
4286 | struct sense_info data; | |
4287 | _scsih_normalize_sense(scmd->sense_buffer, &data); | |
4288 | printk(MPT2SAS_WARN_FMT "\t[sense_key,asc,ascq]: " | |
e94f6747 KD |
4289 | "[0x%02x,0x%02x,0x%02x], count(%d)\n", ioc->name, data.skey, |
4290 | data.asc, data.ascq, le32_to_cpu(mpi_reply->SenseCount)); | |
635374e7 EM |
4291 | } |
4292 | ||
4293 | if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) { | |
4294 | response_info = le32_to_cpu(mpi_reply->ResponseInfo); | |
4295 | response_bytes = (u8 *)&response_info; | |
9982f594 | 4296 | _scsih_response_code(ioc, response_bytes[0]); |
635374e7 EM |
4297 | } |
4298 | } | |
4299 | #endif | |
4300 | ||
4301 | /** | |
3ace8e05 | 4302 | * _scsih_turn_on_fault_led - illuminate Fault LED |
635374e7 EM |
4303 | * @ioc: per adapter object |
4304 | * @handle: device handle | |
3ace8e05 | 4305 | * Context: process |
635374e7 EM |
4306 | * |
4307 | * Return nothing. | |
4308 | */ | |
4309 | static void | |
3ace8e05 | 4310 | _scsih_turn_on_fault_led(struct MPT2SAS_ADAPTER *ioc, u16 handle) |
635374e7 EM |
4311 | { |
4312 | Mpi2SepReply_t mpi_reply; | |
4313 | Mpi2SepRequest_t mpi_request; | |
3ace8e05 KD |
4314 | |
4315 | memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t)); | |
4316 | mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR; | |
4317 | mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS; | |
4318 | mpi_request.SlotStatus = | |
4319 | cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT); | |
4320 | mpi_request.DevHandle = cpu_to_le16(handle); | |
4321 | mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS; | |
4322 | if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply, | |
4323 | &mpi_request)) != 0) { | |
4324 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, | |
4325 | __FILE__, __LINE__, __func__); | |
4326 | return; | |
4327 | } | |
4328 | ||
4329 | if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) { | |
4330 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "enclosure_processor: " | |
4331 | "ioc_status (0x%04x), loginfo(0x%08x)\n", ioc->name, | |
4332 | le16_to_cpu(mpi_reply.IOCStatus), | |
4333 | le32_to_cpu(mpi_reply.IOCLogInfo))); | |
4334 | return; | |
4335 | } | |
4336 | } | |
4337 | ||
4338 | /** | |
4339 | * _scsih_send_event_to_turn_on_fault_led - fire delayed event | |
4340 | * @ioc: per adapter object | |
4341 | * @handle: device handle | |
4342 | * Context: interrupt. | |
4343 | * | |
4344 | * Return nothing. | |
4345 | */ | |
4346 | static void | |
4347 | _scsih_send_event_to_turn_on_fault_led(struct MPT2SAS_ADAPTER *ioc, u16 handle) | |
4348 | { | |
4349 | struct fw_event_work *fw_event; | |
4350 | ||
4351 | fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); | |
4352 | if (!fw_event) | |
4353 | return; | |
4354 | fw_event->event = MPT2SAS_TURN_ON_FAULT_LED; | |
4355 | fw_event->device_handle = handle; | |
4356 | fw_event->ioc = ioc; | |
4357 | _scsih_fw_event_add(ioc, fw_event); | |
4358 | } | |
4359 | ||
4360 | /** | |
4361 | * _scsih_smart_predicted_fault - process smart errors | |
4362 | * @ioc: per adapter object | |
4363 | * @handle: device handle | |
4364 | * Context: interrupt. | |
4365 | * | |
4366 | * Return nothing. | |
4367 | */ | |
4368 | static void | |
4369 | _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle) | |
4370 | { | |
635374e7 EM |
4371 | struct scsi_target *starget; |
4372 | struct MPT2SAS_TARGET *sas_target_priv_data; | |
4373 | Mpi2EventNotificationReply_t *event_reply; | |
4374 | Mpi2EventDataSasDeviceStatusChange_t *event_data; | |
4375 | struct _sas_device *sas_device; | |
4376 | ssize_t sz; | |
4377 | unsigned long flags; | |
4378 | ||
4379 | /* only handle non-raid devices */ | |
4380 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
4381 | sas_device = _scsih_sas_device_find_by_handle(ioc, handle); | |
4382 | if (!sas_device) { | |
4383 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
4384 | return; | |
4385 | } | |
4386 | starget = sas_device->starget; | |
4387 | sas_target_priv_data = starget->hostdata; | |
4388 | ||
4389 | if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) || | |
4390 | ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))) { | |
4391 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
4392 | return; | |
4393 | } | |
4394 | starget_printk(KERN_WARNING, starget, "predicted fault\n"); | |
4395 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
4396 | ||
3ace8e05 KD |
4397 | if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) |
4398 | _scsih_send_event_to_turn_on_fault_led(ioc, handle); | |
635374e7 EM |
4399 | |
4400 | /* insert into event log */ | |
4401 | sz = offsetof(Mpi2EventNotificationReply_t, EventData) + | |
4402 | sizeof(Mpi2EventDataSasDeviceStatusChange_t); | |
f6a290b4 | 4403 | event_reply = kzalloc(sz, GFP_ATOMIC); |
635374e7 EM |
4404 | if (!event_reply) { |
4405 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4406 | ioc->name, __FILE__, __LINE__, __func__); | |
4407 | return; | |
4408 | } | |
4409 | ||
4410 | event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; | |
4411 | event_reply->Event = | |
4412 | cpu_to_le16(MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE); | |
4413 | event_reply->MsgLength = sz/4; | |
4414 | event_reply->EventDataLength = | |
4415 | cpu_to_le16(sizeof(Mpi2EventDataSasDeviceStatusChange_t)/4); | |
4416 | event_data = (Mpi2EventDataSasDeviceStatusChange_t *) | |
4417 | event_reply->EventData; | |
4418 | event_data->ReasonCode = MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA; | |
4419 | event_data->ASC = 0x5D; | |
4420 | event_data->DevHandle = cpu_to_le16(handle); | |
4421 | event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address); | |
4422 | mpt2sas_ctl_add_to_event_log(ioc, event_reply); | |
4423 | kfree(event_reply); | |
4424 | } | |
4425 | ||
4426 | /** | |
d5d135b3 | 4427 | * _scsih_io_done - scsi request callback |
635374e7 EM |
4428 | * @ioc: per adapter object |
4429 | * @smid: system request message index | |
7b936b02 | 4430 | * @msix_index: MSIX table index supplied by the OS |
635374e7 EM |
4431 | * @reply: reply message frame(lower 32bit addr) |
4432 | * | |
77e63ed4 | 4433 | * Callback handler when using _scsih_qcmd. |
635374e7 | 4434 | * |
77e63ed4 KD |
4435 | * Return 1 meaning mf should be freed from _base_interrupt |
4436 | * 0 means the mf is freed from this function. | |
635374e7 | 4437 | */ |
77e63ed4 | 4438 | static u8 |
7b936b02 | 4439 | _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) |
635374e7 EM |
4440 | { |
4441 | Mpi2SCSIIORequest_t *mpi_request; | |
4442 | Mpi2SCSIIOReply_t *mpi_reply; | |
4443 | struct scsi_cmnd *scmd; | |
4444 | u16 ioc_status; | |
4445 | u32 xfer_cnt; | |
4446 | u8 scsi_state; | |
4447 | u8 scsi_status; | |
4448 | u32 log_info; | |
4449 | struct MPT2SAS_DEVICE *sas_device_priv_data; | |
9982f594 | 4450 | u32 response_code = 0; |
82a45258 | 4451 | unsigned long flags; |
635374e7 EM |
4452 | |
4453 | mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); | |
ec07a053 | 4454 | scmd = _scsih_scsi_lookup_get_clear(ioc, smid); |
635374e7 | 4455 | if (scmd == NULL) |
77e63ed4 | 4456 | return 1; |
635374e7 EM |
4457 | |
4458 | mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); | |
4459 | ||
4460 | if (mpi_reply == NULL) { | |
4461 | scmd->result = DID_OK << 16; | |
4462 | goto out; | |
4463 | } | |
4464 | ||
4465 | sas_device_priv_data = scmd->device->hostdata; | |
4466 | if (!sas_device_priv_data || !sas_device_priv_data->sas_target || | |
4467 | sas_device_priv_data->sas_target->deleted) { | |
4468 | scmd->result = DID_NO_CONNECT << 16; | |
4469 | goto out; | |
4470 | } | |
4da7af94 | 4471 | ioc_status = le16_to_cpu(mpi_reply->IOCStatus); |
0bdccdb0 KD |
4472 | /* |
4473 | * WARPDRIVE: If direct_io is set then it is directIO, | |
4474 | * the failed direct I/O should be redirected to volume | |
4475 | */ | |
4da7af94 | 4476 | if (_scsih_scsi_direct_io_get(ioc, smid) && |
4477 | ((ioc_status & MPI2_IOCSTATUS_MASK) | |
4478 | != MPI2_IOCSTATUS_SCSI_TASK_TERMINATED)) { | |
82a45258 KD |
4479 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
4480 | ioc->scsi_lookup[smid - 1].scmd = scmd; | |
0bdccdb0 | 4481 | _scsih_scsi_direct_io_set(ioc, smid, 0); |
09da0b32 | 4482 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
0bdccdb0 KD |
4483 | memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len); |
4484 | mpi_request->DevHandle = | |
4485 | cpu_to_le16(sas_device_priv_data->sas_target->handle); | |
4486 | mpt2sas_base_put_smid_scsi_io(ioc, smid, | |
4487 | sas_device_priv_data->sas_target->handle); | |
4488 | return 0; | |
4489 | } | |
4490 | ||
635374e7 EM |
4491 | |
4492 | /* turning off TLR */ | |
9982f594 KD |
4493 | scsi_state = mpi_reply->SCSIState; |
4494 | if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) | |
4495 | response_code = | |
4496 | le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF; | |
635374e7 EM |
4497 | if (!sas_device_priv_data->tlr_snoop_check) { |
4498 | sas_device_priv_data->tlr_snoop_check++; | |
0bdccdb0 KD |
4499 | /* Make sure Device is not raid volume. |
4500 | * We do not expose raid functionality to upper layer for warpdrive. | |
4501 | */ | |
4502 | if (!ioc->is_warpdrive && !_scsih_is_raid(&scmd->device->sdev_gendev) && | |
3ed21525 | 4503 | sas_is_tlr_enabled(scmd->device) && |
84f0b04a KD |
4504 | response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) { |
4505 | sas_disable_tlr(scmd->device); | |
4506 | sdev_printk(KERN_INFO, scmd->device, "TLR disabled\n"); | |
4507 | } | |
635374e7 EM |
4508 | } |
4509 | ||
4510 | xfer_cnt = le32_to_cpu(mpi_reply->TransferCount); | |
4511 | scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt); | |
635374e7 EM |
4512 | if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) |
4513 | log_info = le32_to_cpu(mpi_reply->IOCLogInfo); | |
4514 | else | |
4515 | log_info = 0; | |
4516 | ioc_status &= MPI2_IOCSTATUS_MASK; | |
635374e7 EM |
4517 | scsi_status = mpi_reply->SCSIStatus; |
4518 | ||
4519 | if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 && | |
4520 | (scsi_status == MPI2_SCSI_STATUS_BUSY || | |
4521 | scsi_status == MPI2_SCSI_STATUS_RESERVATION_CONFLICT || | |
4522 | scsi_status == MPI2_SCSI_STATUS_TASK_SET_FULL)) { | |
4523 | ioc_status = MPI2_IOCSTATUS_SUCCESS; | |
4524 | } | |
4525 | ||
4526 | if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) { | |
4527 | struct sense_info data; | |
4528 | const void *sense_data = mpt2sas_base_get_sense_buffer(ioc, | |
4529 | smid); | |
0d04df9b | 4530 | u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE, |
635374e7 | 4531 | le32_to_cpu(mpi_reply->SenseCount)); |
0d04df9b | 4532 | memcpy(scmd->sense_buffer, sense_data, sz); |
635374e7 EM |
4533 | _scsih_normalize_sense(scmd->sense_buffer, &data); |
4534 | /* failure prediction threshold exceeded */ | |
4535 | if (data.asc == 0x5D) | |
4536 | _scsih_smart_predicted_fault(ioc, | |
4537 | le16_to_cpu(mpi_reply->DevHandle)); | |
4538 | } | |
4539 | ||
4540 | switch (ioc_status) { | |
4541 | case MPI2_IOCSTATUS_BUSY: | |
4542 | case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES: | |
4543 | scmd->result = SAM_STAT_BUSY; | |
4544 | break; | |
4545 | ||
4546 | case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: | |
4547 | scmd->result = DID_NO_CONNECT << 16; | |
4548 | break; | |
4549 | ||
4550 | case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: | |
4551 | if (sas_device_priv_data->block) { | |
e4e7c7ed KD |
4552 | scmd->result = DID_TRANSPORT_DISRUPTED << 16; |
4553 | goto out; | |
635374e7 | 4554 | } |
3ade1ca7 | 4555 | scmd->result = DID_SOFT_ERROR << 16; |
4556 | break; | |
635374e7 EM |
4557 | case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: |
4558 | case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: | |
4559 | scmd->result = DID_RESET << 16; | |
4560 | break; | |
4561 | ||
4562 | case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: | |
4563 | if ((xfer_cnt == 0) || (scmd->underflow > xfer_cnt)) | |
4564 | scmd->result = DID_SOFT_ERROR << 16; | |
4565 | else | |
4566 | scmd->result = (DID_OK << 16) | scsi_status; | |
4567 | break; | |
4568 | ||
4569 | case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: | |
4570 | scmd->result = (DID_OK << 16) | scsi_status; | |
4571 | ||
4572 | if ((scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID)) | |
4573 | break; | |
4574 | ||
4575 | if (xfer_cnt < scmd->underflow) { | |
4576 | if (scsi_status == SAM_STAT_BUSY) | |
4577 | scmd->result = SAM_STAT_BUSY; | |
4578 | else | |
4579 | scmd->result = DID_SOFT_ERROR << 16; | |
4580 | } else if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED | | |
4581 | MPI2_SCSI_STATE_NO_SCSI_STATUS)) | |
4582 | scmd->result = DID_SOFT_ERROR << 16; | |
4583 | else if (scsi_state & MPI2_SCSI_STATE_TERMINATED) | |
4584 | scmd->result = DID_RESET << 16; | |
4585 | else if (!xfer_cnt && scmd->cmnd[0] == REPORT_LUNS) { | |
4586 | mpi_reply->SCSIState = MPI2_SCSI_STATE_AUTOSENSE_VALID; | |
4587 | mpi_reply->SCSIStatus = SAM_STAT_CHECK_CONDITION; | |
4588 | scmd->result = (DRIVER_SENSE << 24) | | |
4589 | SAM_STAT_CHECK_CONDITION; | |
4590 | scmd->sense_buffer[0] = 0x70; | |
4591 | scmd->sense_buffer[2] = ILLEGAL_REQUEST; | |
4592 | scmd->sense_buffer[12] = 0x20; | |
4593 | scmd->sense_buffer[13] = 0; | |
4594 | } | |
4595 | break; | |
4596 | ||
4597 | case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: | |
4598 | scsi_set_resid(scmd, 0); | |
4599 | case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: | |
4600 | case MPI2_IOCSTATUS_SUCCESS: | |
4601 | scmd->result = (DID_OK << 16) | scsi_status; | |
9982f594 KD |
4602 | if (response_code == |
4603 | MPI2_SCSITASKMGMT_RSP_INVALID_FRAME || | |
4604 | (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED | | |
4605 | MPI2_SCSI_STATE_NO_SCSI_STATUS))) | |
635374e7 EM |
4606 | scmd->result = DID_SOFT_ERROR << 16; |
4607 | else if (scsi_state & MPI2_SCSI_STATE_TERMINATED) | |
4608 | scmd->result = DID_RESET << 16; | |
4609 | break; | |
4610 | ||
3c621b3e EM |
4611 | case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: |
4612 | case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: | |
4613 | case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: | |
4614 | _scsih_eedp_error_handling(scmd, ioc_status); | |
4615 | break; | |
635374e7 EM |
4616 | case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: |
4617 | case MPI2_IOCSTATUS_INVALID_FUNCTION: | |
4618 | case MPI2_IOCSTATUS_INVALID_SGL: | |
4619 | case MPI2_IOCSTATUS_INTERNAL_ERROR: | |
4620 | case MPI2_IOCSTATUS_INVALID_FIELD: | |
4621 | case MPI2_IOCSTATUS_INVALID_STATE: | |
4622 | case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: | |
4623 | case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: | |
4624 | default: | |
4625 | scmd->result = DID_SOFT_ERROR << 16; | |
4626 | break; | |
4627 | ||
4628 | } | |
4629 | ||
4630 | #ifdef CONFIG_SCSI_MPT2SAS_LOGGING | |
4631 | if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY)) | |
4632 | _scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid); | |
4633 | #endif | |
4634 | ||
4635 | out: | |
4636 | scsi_dma_unmap(scmd); | |
4637 | scmd->scsi_done(scmd); | |
77e63ed4 | 4638 | return 1; |
635374e7 EM |
4639 | } |
4640 | ||
635374e7 EM |
4641 | /** |
4642 | * _scsih_sas_host_refresh - refreshing sas host object contents | |
4643 | * @ioc: per adapter object | |
635374e7 EM |
4644 | * Context: user |
4645 | * | |
4646 | * During port enable, fw will send topology events for every device. Its | |
4647 | * possible that the handles may change from the previous setting, so this | |
4648 | * code keeping handles updating if changed. | |
4649 | * | |
4650 | * Return nothing. | |
4651 | */ | |
4652 | static void | |
c5e039be | 4653 | _scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc) |
635374e7 EM |
4654 | { |
4655 | u16 sz; | |
4656 | u16 ioc_status; | |
4657 | int i; | |
4658 | Mpi2ConfigReply_t mpi_reply; | |
4659 | Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; | |
c5e039be | 4660 | u16 attached_handle; |
7f6f794d | 4661 | u8 link_rate; |
635374e7 EM |
4662 | |
4663 | dtmprintk(ioc, printk(MPT2SAS_INFO_FMT | |
4664 | "updating handles for sas_host(0x%016llx)\n", | |
4665 | ioc->name, (unsigned long long)ioc->sas_hba.sas_address)); | |
4666 | ||
4667 | sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys | |
4668 | * sizeof(Mpi2SasIOUnit0PhyData_t)); | |
4669 | sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); | |
4670 | if (!sas_iounit_pg0) { | |
4671 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4672 | ioc->name, __FILE__, __LINE__, __func__); | |
4673 | return; | |
4674 | } | |
635374e7 | 4675 | |
c5e039be KD |
4676 | if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, |
4677 | sas_iounit_pg0, sz)) != 0) | |
4678 | goto out; | |
4679 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; | |
4680 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS) | |
4681 | goto out; | |
4682 | for (i = 0; i < ioc->sas_hba.num_phys ; i++) { | |
7f6f794d | 4683 | link_rate = sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4; |
c5e039be KD |
4684 | if (i == 0) |
4685 | ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0-> | |
4686 | PhyData[0].ControllerDevHandle); | |
4687 | ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle; | |
4688 | attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i]. | |
4689 | AttachedDevHandle); | |
7f6f794d KD |
4690 | if (attached_handle && link_rate < MPI2_SAS_NEG_LINK_RATE_1_5) |
4691 | link_rate = MPI2_SAS_NEG_LINK_RATE_1_5; | |
c5e039be | 4692 | mpt2sas_transport_update_links(ioc, ioc->sas_hba.sas_address, |
7f6f794d | 4693 | attached_handle, i, link_rate); |
c5e039be | 4694 | } |
635374e7 EM |
4695 | out: |
4696 | kfree(sas_iounit_pg0); | |
4697 | } | |
4698 | ||
4699 | /** | |
4700 | * _scsih_sas_host_add - create sas host object | |
4701 | * @ioc: per adapter object | |
4702 | * | |
4703 | * Creating host side data object, stored in ioc->sas_hba | |
4704 | * | |
4705 | * Return nothing. | |
4706 | */ | |
4707 | static void | |
4708 | _scsih_sas_host_add(struct MPT2SAS_ADAPTER *ioc) | |
4709 | { | |
4710 | int i; | |
4711 | Mpi2ConfigReply_t mpi_reply; | |
4712 | Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; | |
4713 | Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; | |
4714 | Mpi2SasPhyPage0_t phy_pg0; | |
4715 | Mpi2SasDevicePage0_t sas_device_pg0; | |
4716 | Mpi2SasEnclosurePage0_t enclosure_pg0; | |
4717 | u16 ioc_status; | |
4718 | u16 sz; | |
4719 | u16 device_missing_delay; | |
4720 | ||
4721 | mpt2sas_config_get_number_hba_phys(ioc, &ioc->sas_hba.num_phys); | |
4722 | if (!ioc->sas_hba.num_phys) { | |
4723 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4724 | ioc->name, __FILE__, __LINE__, __func__); | |
4725 | return; | |
4726 | } | |
4727 | ||
4728 | /* sas_iounit page 0 */ | |
4729 | sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys * | |
4730 | sizeof(Mpi2SasIOUnit0PhyData_t)); | |
4731 | sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); | |
4732 | if (!sas_iounit_pg0) { | |
4733 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4734 | ioc->name, __FILE__, __LINE__, __func__); | |
4735 | return; | |
4736 | } | |
4737 | if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply, | |
4738 | sas_iounit_pg0, sz))) { | |
4739 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4740 | ioc->name, __FILE__, __LINE__, __func__); | |
4741 | goto out; | |
4742 | } | |
4743 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
4744 | MPI2_IOCSTATUS_MASK; | |
4745 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { | |
4746 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4747 | ioc->name, __FILE__, __LINE__, __func__); | |
4748 | goto out; | |
4749 | } | |
4750 | ||
4751 | /* sas_iounit page 1 */ | |
4752 | sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * | |
4753 | sizeof(Mpi2SasIOUnit1PhyData_t)); | |
4754 | sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); | |
4755 | if (!sas_iounit_pg1) { | |
4756 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4757 | ioc->name, __FILE__, __LINE__, __func__); | |
4758 | goto out; | |
4759 | } | |
4760 | if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, | |
4761 | sas_iounit_pg1, sz))) { | |
4762 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4763 | ioc->name, __FILE__, __LINE__, __func__); | |
4764 | goto out; | |
4765 | } | |
4766 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
4767 | MPI2_IOCSTATUS_MASK; | |
4768 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { | |
4769 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4770 | ioc->name, __FILE__, __LINE__, __func__); | |
4771 | goto out; | |
4772 | } | |
4773 | ||
4774 | ioc->io_missing_delay = | |
4775 | le16_to_cpu(sas_iounit_pg1->IODeviceMissingDelay); | |
4776 | device_missing_delay = | |
4777 | le16_to_cpu(sas_iounit_pg1->ReportDeviceMissingDelay); | |
4778 | if (device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16) | |
4779 | ioc->device_missing_delay = (device_missing_delay & | |
4780 | MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16; | |
4781 | else | |
4782 | ioc->device_missing_delay = device_missing_delay & | |
4783 | MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK; | |
4784 | ||
4785 | ioc->sas_hba.parent_dev = &ioc->shost->shost_gendev; | |
4786 | ioc->sas_hba.phy = kcalloc(ioc->sas_hba.num_phys, | |
4787 | sizeof(struct _sas_phy), GFP_KERNEL); | |
4788 | if (!ioc->sas_hba.phy) { | |
4789 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4790 | ioc->name, __FILE__, __LINE__, __func__); | |
4791 | goto out; | |
4792 | } | |
4793 | for (i = 0; i < ioc->sas_hba.num_phys ; i++) { | |
4794 | if ((mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0, | |
4795 | i))) { | |
4796 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4797 | ioc->name, __FILE__, __LINE__, __func__); | |
4798 | goto out; | |
4799 | } | |
4800 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
4801 | MPI2_IOCSTATUS_MASK; | |
4802 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { | |
4803 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4804 | ioc->name, __FILE__, __LINE__, __func__); | |
4805 | goto out; | |
4806 | } | |
c5e039be KD |
4807 | |
4808 | if (i == 0) | |
4809 | ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0-> | |
4810 | PhyData[0].ControllerDevHandle); | |
4811 | ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle; | |
635374e7 EM |
4812 | ioc->sas_hba.phy[i].phy_id = i; |
4813 | mpt2sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i], | |
4814 | phy_pg0, ioc->sas_hba.parent_dev); | |
4815 | } | |
4816 | if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, | |
c5e039be | 4817 | MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.handle))) { |
635374e7 EM |
4818 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", |
4819 | ioc->name, __FILE__, __LINE__, __func__); | |
4820 | goto out; | |
4821 | } | |
635374e7 EM |
4822 | ioc->sas_hba.enclosure_handle = |
4823 | le16_to_cpu(sas_device_pg0.EnclosureHandle); | |
4824 | ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress); | |
4825 | printk(MPT2SAS_INFO_FMT "host_add: handle(0x%04x), " | |
4826 | "sas_addr(0x%016llx), phys(%d)\n", ioc->name, ioc->sas_hba.handle, | |
4827 | (unsigned long long) ioc->sas_hba.sas_address, | |
4828 | ioc->sas_hba.num_phys) ; | |
4829 | ||
4830 | if (ioc->sas_hba.enclosure_handle) { | |
4831 | if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, | |
4832 | &enclosure_pg0, | |
4833 | MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, | |
4834 | ioc->sas_hba.enclosure_handle))) { | |
4835 | ioc->sas_hba.enclosure_logical_id = | |
4836 | le64_to_cpu(enclosure_pg0.EnclosureLogicalID); | |
4837 | } | |
4838 | } | |
4839 | ||
4840 | out: | |
4841 | kfree(sas_iounit_pg1); | |
4842 | kfree(sas_iounit_pg0); | |
4843 | } | |
4844 | ||
4845 | /** | |
4846 | * _scsih_expander_add - creating expander object | |
4847 | * @ioc: per adapter object | |
4848 | * @handle: expander handle | |
4849 | * | |
4850 | * Creating expander object, stored in ioc->sas_expander_list. | |
4851 | * | |
4852 | * Return 0 for success, else error. | |
4853 | */ | |
4854 | static int | |
4855 | _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle) | |
4856 | { | |
4857 | struct _sas_node *sas_expander; | |
4858 | Mpi2ConfigReply_t mpi_reply; | |
4859 | Mpi2ExpanderPage0_t expander_pg0; | |
4860 | Mpi2ExpanderPage1_t expander_pg1; | |
4861 | Mpi2SasEnclosurePage0_t enclosure_pg0; | |
4862 | u32 ioc_status; | |
4863 | u16 parent_handle; | |
c97951ec | 4864 | u64 sas_address, sas_address_parent = 0; |
635374e7 EM |
4865 | int i; |
4866 | unsigned long flags; | |
20f5895d | 4867 | struct _sas_port *mpt2sas_port = NULL; |
635374e7 EM |
4868 | int rc = 0; |
4869 | ||
4870 | if (!handle) | |
4871 | return -1; | |
4872 | ||
3cb5469a | 4873 | if (ioc->shost_recovery || ioc->pci_error_recovery) |
155dd4c7 KD |
4874 | return -1; |
4875 | ||
635374e7 EM |
4876 | if ((mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, |
4877 | MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) { | |
4878 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4879 | ioc->name, __FILE__, __LINE__, __func__); | |
4880 | return -1; | |
4881 | } | |
4882 | ||
4883 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
4884 | MPI2_IOCSTATUS_MASK; | |
4885 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { | |
4886 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4887 | ioc->name, __FILE__, __LINE__, __func__); | |
4888 | return -1; | |
4889 | } | |
4890 | ||
4891 | /* handle out of order topology events */ | |
4892 | parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle); | |
c5e039be KD |
4893 | if (_scsih_get_sas_address(ioc, parent_handle, &sas_address_parent) |
4894 | != 0) { | |
4895 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4896 | ioc->name, __FILE__, __LINE__, __func__); | |
4897 | return -1; | |
4898 | } | |
4899 | if (sas_address_parent != ioc->sas_hba.sas_address) { | |
635374e7 | 4900 | spin_lock_irqsave(&ioc->sas_node_lock, flags); |
c5e039be KD |
4901 | sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc, |
4902 | sas_address_parent); | |
635374e7 EM |
4903 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); |
4904 | if (!sas_expander) { | |
4905 | rc = _scsih_expander_add(ioc, parent_handle); | |
4906 | if (rc != 0) | |
4907 | return rc; | |
4908 | } | |
4909 | } | |
4910 | ||
635374e7 | 4911 | spin_lock_irqsave(&ioc->sas_node_lock, flags); |
595bb0bd | 4912 | sas_address = le64_to_cpu(expander_pg0.SASAddress); |
635374e7 EM |
4913 | sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc, |
4914 | sas_address); | |
4915 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
4916 | ||
4917 | if (sas_expander) | |
4918 | return 0; | |
4919 | ||
4920 | sas_expander = kzalloc(sizeof(struct _sas_node), | |
4921 | GFP_KERNEL); | |
4922 | if (!sas_expander) { | |
4923 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4924 | ioc->name, __FILE__, __LINE__, __func__); | |
4925 | return -1; | |
4926 | } | |
4927 | ||
4928 | sas_expander->handle = handle; | |
4929 | sas_expander->num_phys = expander_pg0.NumPhys; | |
c5e039be | 4930 | sas_expander->sas_address_parent = sas_address_parent; |
635374e7 EM |
4931 | sas_expander->sas_address = sas_address; |
4932 | ||
4933 | printk(MPT2SAS_INFO_FMT "expander_add: handle(0x%04x)," | |
4934 | " parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc->name, | |
c5e039be | 4935 | handle, parent_handle, (unsigned long long) |
635374e7 EM |
4936 | sas_expander->sas_address, sas_expander->num_phys); |
4937 | ||
4938 | if (!sas_expander->num_phys) | |
4939 | goto out_fail; | |
4940 | sas_expander->phy = kcalloc(sas_expander->num_phys, | |
4941 | sizeof(struct _sas_phy), GFP_KERNEL); | |
4942 | if (!sas_expander->phy) { | |
4943 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4944 | ioc->name, __FILE__, __LINE__, __func__); | |
4945 | rc = -1; | |
4946 | goto out_fail; | |
4947 | } | |
4948 | ||
4949 | INIT_LIST_HEAD(&sas_expander->sas_port_list); | |
4950 | mpt2sas_port = mpt2sas_transport_port_add(ioc, handle, | |
c5e039be | 4951 | sas_address_parent); |
635374e7 EM |
4952 | if (!mpt2sas_port) { |
4953 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4954 | ioc->name, __FILE__, __LINE__, __func__); | |
4955 | rc = -1; | |
4956 | goto out_fail; | |
4957 | } | |
4958 | sas_expander->parent_dev = &mpt2sas_port->rphy->dev; | |
4959 | ||
4960 | for (i = 0 ; i < sas_expander->num_phys ; i++) { | |
4961 | if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply, | |
4962 | &expander_pg1, i, handle))) { | |
4963 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4964 | ioc->name, __FILE__, __LINE__, __func__); | |
20f5895d KD |
4965 | rc = -1; |
4966 | goto out_fail; | |
635374e7 EM |
4967 | } |
4968 | sas_expander->phy[i].handle = handle; | |
4969 | sas_expander->phy[i].phy_id = i; | |
20f5895d KD |
4970 | |
4971 | if ((mpt2sas_transport_add_expander_phy(ioc, | |
4972 | &sas_expander->phy[i], expander_pg1, | |
4973 | sas_expander->parent_dev))) { | |
4974 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
4975 | ioc->name, __FILE__, __LINE__, __func__); | |
4976 | rc = -1; | |
4977 | goto out_fail; | |
4978 | } | |
635374e7 EM |
4979 | } |
4980 | ||
4981 | if (sas_expander->enclosure_handle) { | |
4982 | if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, | |
4983 | &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, | |
4984 | sas_expander->enclosure_handle))) { | |
4985 | sas_expander->enclosure_logical_id = | |
4986 | le64_to_cpu(enclosure_pg0.EnclosureLogicalID); | |
4987 | } | |
4988 | } | |
4989 | ||
4990 | _scsih_expander_node_add(ioc, sas_expander); | |
4991 | return 0; | |
4992 | ||
4993 | out_fail: | |
4994 | ||
20f5895d KD |
4995 | if (mpt2sas_port) |
4996 | mpt2sas_transport_port_remove(ioc, sas_expander->sas_address, | |
c5e039be | 4997 | sas_address_parent); |
635374e7 EM |
4998 | kfree(sas_expander); |
4999 | return rc; | |
5000 | } | |
5001 | ||
744090d3 KD |
5002 | /** |
5003 | * _scsih_done - scsih callback handler. | |
5004 | * @ioc: per adapter object | |
5005 | * @smid: system request message index | |
5006 | * @msix_index: MSIX table index supplied by the OS | |
5007 | * @reply: reply message frame(lower 32bit addr) | |
5008 | * | |
5009 | * Callback handler when sending internal generated message frames. | |
5010 | * The callback index passed is `ioc->scsih_cb_idx` | |
5011 | * | |
5012 | * Return 1 meaning mf should be freed from _base_interrupt | |
5013 | * 0 means the mf is freed from this function. | |
5014 | */ | |
5015 | static u8 | |
5016 | _scsih_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) | |
5017 | { | |
5018 | MPI2DefaultReply_t *mpi_reply; | |
5019 | ||
5020 | mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); | |
5021 | if (ioc->scsih_cmds.status == MPT2_CMD_NOT_USED) | |
5022 | return 1; | |
5023 | if (ioc->scsih_cmds.smid != smid) | |
5024 | return 1; | |
5025 | ioc->scsih_cmds.status |= MPT2_CMD_COMPLETE; | |
5026 | if (mpi_reply) { | |
5027 | memcpy(ioc->scsih_cmds.reply, mpi_reply, | |
5028 | mpi_reply->MsgLength*4); | |
5029 | ioc->scsih_cmds.status |= MPT2_CMD_REPLY_VALID; | |
5030 | } | |
5031 | ioc->scsih_cmds.status &= ~MPT2_CMD_PENDING; | |
5032 | complete(&ioc->scsih_cmds.done); | |
5033 | return 1; | |
5034 | } | |
5035 | ||
635374e7 | 5036 | /** |
7f6f794d | 5037 | * mpt2sas_expander_remove - removing expander object |
635374e7 | 5038 | * @ioc: per adapter object |
c5e039be | 5039 | * @sas_address: expander sas_address |
635374e7 EM |
5040 | * |
5041 | * Return nothing. | |
5042 | */ | |
7f6f794d KD |
5043 | void |
5044 | mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address) | |
635374e7 EM |
5045 | { |
5046 | struct _sas_node *sas_expander; | |
5047 | unsigned long flags; | |
5048 | ||
155dd4c7 KD |
5049 | if (ioc->shost_recovery) |
5050 | return; | |
5051 | ||
635374e7 | 5052 | spin_lock_irqsave(&ioc->sas_node_lock, flags); |
c5e039be KD |
5053 | sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc, |
5054 | sas_address); | |
09da0b32 | 5055 | if (sas_expander) |
5056 | list_del(&sas_expander->list); | |
635374e7 | 5057 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); |
09da0b32 | 5058 | if (sas_expander) |
5059 | _scsih_expander_node_remove(ioc, sas_expander); | |
635374e7 EM |
5060 | } |
5061 | ||
b4344276 KD |
5062 | /** |
5063 | * _scsih_check_access_status - check access flags | |
5064 | * @ioc: per adapter object | |
5065 | * @sas_address: sas address | |
5066 | * @handle: sas device handle | |
5067 | * @access_flags: errors returned during discovery of the device | |
5068 | * | |
5069 | * Return 0 for success, else failure | |
5070 | */ | |
5071 | static u8 | |
5072 | _scsih_check_access_status(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, | |
5073 | u16 handle, u8 access_status) | |
5074 | { | |
5075 | u8 rc = 1; | |
5076 | char *desc = NULL; | |
5077 | ||
5078 | switch (access_status) { | |
5079 | case MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS: | |
5080 | case MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION: | |
5081 | rc = 0; | |
5082 | break; | |
5083 | case MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED: | |
5084 | desc = "sata capability failed"; | |
5085 | break; | |
5086 | case MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT: | |
5087 | desc = "sata affiliation conflict"; | |
5088 | break; | |
5089 | case MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE: | |
5090 | desc = "route not addressable"; | |
5091 | break; | |
5092 | case MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE: | |
5093 | desc = "smp error not addressable"; | |
5094 | break; | |
5095 | case MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED: | |
5096 | desc = "device blocked"; | |
5097 | break; | |
5098 | case MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED: | |
5099 | case MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN: | |
5100 | case MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT: | |
5101 | case MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG: | |
5102 | case MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION: | |
5103 | case MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER: | |
5104 | case MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN: | |
5105 | case MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN: | |
5106 | case MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN: | |
5107 | case MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION: | |
5108 | case MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE: | |
5109 | case MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX: | |
5110 | desc = "sata initialization failed"; | |
5111 | break; | |
5112 | default: | |
5113 | desc = "unknown"; | |
5114 | break; | |
5115 | } | |
5116 | ||
5117 | if (!rc) | |
5118 | return 0; | |
5119 | ||
5120 | printk(MPT2SAS_ERR_FMT "discovery errors(%s): sas_address(0x%016llx), " | |
5121 | "handle(0x%04x)\n", ioc->name, desc, | |
5122 | (unsigned long long)sas_address, handle); | |
5123 | return rc; | |
5124 | } | |
5125 | ||
5126 | static void | |
5127 | _scsih_check_device(struct MPT2SAS_ADAPTER *ioc, u16 handle) | |
5128 | { | |
5129 | Mpi2ConfigReply_t mpi_reply; | |
5130 | Mpi2SasDevicePage0_t sas_device_pg0; | |
5131 | struct _sas_device *sas_device; | |
5132 | u32 ioc_status; | |
5133 | unsigned long flags; | |
5134 | u64 sas_address; | |
5135 | struct scsi_target *starget; | |
5136 | struct MPT2SAS_TARGET *sas_target_priv_data; | |
5137 | u32 device_info; | |
5138 | ||
09da0b32 | 5139 | |
b4344276 KD |
5140 | if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, |
5141 | MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) | |
5142 | return; | |
5143 | ||
5144 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; | |
5145 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS) | |
5146 | return; | |
5147 | ||
5148 | /* check if this is end device */ | |
5149 | device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); | |
5150 | if (!(_scsih_is_end_device(device_info))) | |
5151 | return; | |
5152 | ||
5153 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
5154 | sas_address = le64_to_cpu(sas_device_pg0.SASAddress); | |
5155 | sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, | |
5156 | sas_address); | |
5157 | ||
5158 | if (!sas_device) { | |
5159 | printk(MPT2SAS_ERR_FMT "device is not present " | |
5160 | "handle(0x%04x), no sas_device!!!\n", ioc->name, handle); | |
5161 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
5162 | return; | |
5163 | } | |
5164 | ||
5165 | if (unlikely(sas_device->handle != handle)) { | |
5166 | starget = sas_device->starget; | |
5167 | sas_target_priv_data = starget->hostdata; | |
5168 | starget_printk(KERN_INFO, starget, "handle changed from(0x%04x)" | |
5169 | " to (0x%04x)!!!\n", sas_device->handle, handle); | |
5170 | sas_target_priv_data->handle = handle; | |
5171 | sas_device->handle = handle; | |
5172 | } | |
b4344276 KD |
5173 | |
5174 | /* check if device is present */ | |
5175 | if (!(le16_to_cpu(sas_device_pg0.Flags) & | |
5176 | MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) { | |
5177 | printk(MPT2SAS_ERR_FMT "device is not present " | |
5178 | "handle(0x%04x), flags!!!\n", ioc->name, handle); | |
09da0b32 | 5179 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); |
b4344276 KD |
5180 | return; |
5181 | } | |
5182 | ||
5183 | /* check if there were any issues with discovery */ | |
5184 | if (_scsih_check_access_status(ioc, sas_address, handle, | |
09da0b32 | 5185 | sas_device_pg0.AccessStatus)) { |
5186 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
b4344276 | 5187 | return; |
09da0b32 | 5188 | } |
5189 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
39af7a98 | 5190 | _scsih_ublock_io_device(ioc, sas_address); |
b4344276 KD |
5191 | |
5192 | } | |
5193 | ||
635374e7 EM |
5194 | /** |
5195 | * _scsih_add_device - creating sas device object | |
5196 | * @ioc: per adapter object | |
5197 | * @handle: sas device handle | |
5198 | * @phy_num: phy number end device attached to | |
5199 | * @is_pd: is this hidden raid component | |
5200 | * | |
5201 | * Creating end device object, stored in ioc->sas_device_list. | |
5202 | * | |
5203 | * Returns 0 for success, non-zero for failure. | |
5204 | */ | |
5205 | static int | |
5206 | _scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd) | |
5207 | { | |
5208 | Mpi2ConfigReply_t mpi_reply; | |
5209 | Mpi2SasDevicePage0_t sas_device_pg0; | |
5210 | Mpi2SasEnclosurePage0_t enclosure_pg0; | |
5211 | struct _sas_device *sas_device; | |
5212 | u32 ioc_status; | |
5213 | __le64 sas_address; | |
5214 | u32 device_info; | |
5215 | unsigned long flags; | |
5216 | ||
5217 | if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, | |
5218 | MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { | |
5219 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
5220 | ioc->name, __FILE__, __LINE__, __func__); | |
5221 | return -1; | |
5222 | } | |
5223 | ||
5224 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
5225 | MPI2_IOCSTATUS_MASK; | |
5226 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { | |
5227 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
5228 | ioc->name, __FILE__, __LINE__, __func__); | |
5229 | return -1; | |
5230 | } | |
5231 | ||
b4344276 KD |
5232 | sas_address = le64_to_cpu(sas_device_pg0.SASAddress); |
5233 | ||
635374e7 EM |
5234 | /* check if device is present */ |
5235 | if (!(le16_to_cpu(sas_device_pg0.Flags) & | |
5236 | MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) { | |
5237 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
5238 | ioc->name, __FILE__, __LINE__, __func__); | |
5239 | printk(MPT2SAS_ERR_FMT "Flags = 0x%04x\n", | |
5240 | ioc->name, le16_to_cpu(sas_device_pg0.Flags)); | |
5241 | return -1; | |
5242 | } | |
5243 | ||
b4344276 KD |
5244 | /* check if there were any issues with discovery */ |
5245 | if (_scsih_check_access_status(ioc, sas_address, handle, | |
5246 | sas_device_pg0.AccessStatus)) | |
635374e7 | 5247 | return -1; |
635374e7 EM |
5248 | |
5249 | /* check if this is end device */ | |
5250 | device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); | |
5251 | if (!(_scsih_is_end_device(device_info))) { | |
5252 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
5253 | ioc->name, __FILE__, __LINE__, __func__); | |
5254 | return -1; | |
5255 | } | |
5256 | ||
635374e7 EM |
5257 | |
5258 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
5259 | sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, | |
5260 | sas_address); | |
5261 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
5262 | ||
b4344276 | 5263 | if (sas_device) |
635374e7 | 5264 | return 0; |
635374e7 EM |
5265 | |
5266 | sas_device = kzalloc(sizeof(struct _sas_device), | |
5267 | GFP_KERNEL); | |
5268 | if (!sas_device) { | |
5269 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
5270 | ioc->name, __FILE__, __LINE__, __func__); | |
5271 | return -1; | |
5272 | } | |
5273 | ||
5274 | sas_device->handle = handle; | |
c5e039be KD |
5275 | if (_scsih_get_sas_address(ioc, le16_to_cpu |
5276 | (sas_device_pg0.ParentDevHandle), | |
5277 | &sas_device->sas_address_parent) != 0) | |
5278 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
5279 | ioc->name, __FILE__, __LINE__, __func__); | |
635374e7 EM |
5280 | sas_device->enclosure_handle = |
5281 | le16_to_cpu(sas_device_pg0.EnclosureHandle); | |
5282 | sas_device->slot = | |
5283 | le16_to_cpu(sas_device_pg0.Slot); | |
5284 | sas_device->device_info = device_info; | |
5285 | sas_device->sas_address = sas_address; | |
7fbae67a | 5286 | sas_device->phy = sas_device_pg0.PhyNum; |
635374e7 EM |
5287 | |
5288 | /* get enclosure_logical_id */ | |
15052c9e KD |
5289 | if (sas_device->enclosure_handle && !(mpt2sas_config_get_enclosure_pg0( |
5290 | ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, | |
5291 | sas_device->enclosure_handle))) | |
635374e7 EM |
5292 | sas_device->enclosure_logical_id = |
5293 | le64_to_cpu(enclosure_pg0.EnclosureLogicalID); | |
635374e7 EM |
5294 | |
5295 | /* get device name */ | |
5296 | sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName); | |
5297 | ||
921cd802 | 5298 | if (ioc->wait_for_discovery_to_complete) |
635374e7 EM |
5299 | _scsih_sas_device_init_add(ioc, sas_device); |
5300 | else | |
5301 | _scsih_sas_device_add(ioc, sas_device); | |
5302 | ||
5303 | return 0; | |
5304 | } | |
5305 | ||
1278b11f KD |
5306 | /** |
5307 | * _scsih_remove_device - removing sas device object | |
5308 | * @ioc: per adapter object | |
5309 | * @sas_device_delete: the sas_device object | |
5310 | * | |
5311 | * Return nothing. | |
5312 | */ | |
5313 | static void | |
5314 | _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, | |
5315 | struct _sas_device *sas_device) | |
5316 | { | |
1278b11f | 5317 | struct MPT2SAS_TARGET *sas_target_priv_data; |
34a03bef | 5318 | |
1278b11f KD |
5319 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: " |
5320 | "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__, | |
09da0b32 | 5321 | sas_device->handle, (unsigned long long) |
5322 | sas_device->sas_address)); | |
1278b11f | 5323 | |
09da0b32 | 5324 | if (sas_device->starget && sas_device->starget->hostdata) { |
5325 | sas_target_priv_data = sas_device->starget->hostdata; | |
1278b11f | 5326 | sas_target_priv_data->deleted = 1; |
39af7a98 | 5327 | _scsih_ublock_io_device(ioc, sas_device->sas_address); |
918134ef | 5328 | sas_target_priv_data->handle = |
5329 | MPT2SAS_INVALID_DEVICE_HANDLE; | |
1278b11f KD |
5330 | } |
5331 | ||
0bdccdb0 KD |
5332 | if (!ioc->hide_drives) |
5333 | mpt2sas_transport_port_remove(ioc, | |
09da0b32 | 5334 | sas_device->sas_address, |
5335 | sas_device->sas_address_parent); | |
635374e7 EM |
5336 | |
5337 | printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), sas_addr" | |
09da0b32 | 5338 | "(0x%016llx)\n", ioc->name, sas_device->handle, |
5339 | (unsigned long long) sas_device->sas_address); | |
635374e7 | 5340 | |
1278b11f KD |
5341 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit: " |
5342 | "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__, | |
09da0b32 | 5343 | sas_device->handle, (unsigned long long) |
5344 | sas_device->sas_address)); | |
5345 | kfree(sas_device); | |
5346 | } | |
5347 | /** | |
5348 | * _scsih_device_remove_by_handle - removing device object by handle | |
5349 | * @ioc: per adapter object | |
5350 | * @handle: device handle | |
5351 | * | |
5352 | * Return nothing. | |
5353 | */ | |
5354 | static void | |
5355 | _scsih_device_remove_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle) | |
5356 | { | |
5357 | struct _sas_device *sas_device; | |
5358 | unsigned long flags; | |
5359 | ||
5360 | if (ioc->shost_recovery) | |
5361 | return; | |
5362 | ||
5363 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
5364 | sas_device = _scsih_sas_device_find_by_handle(ioc, handle); | |
5365 | if (sas_device) | |
5366 | list_del(&sas_device->list); | |
5367 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
5368 | if (sas_device) | |
5369 | _scsih_remove_device(ioc, sas_device); | |
635374e7 EM |
5370 | } |
5371 | ||
7f6f794d | 5372 | /** |
09da0b32 | 5373 | * mpt2sas_device_remove_by_sas_address - removing device object by sas address |
7f6f794d | 5374 | * @ioc: per adapter object |
09da0b32 | 5375 | * @sas_address: device sas_address |
7f6f794d KD |
5376 | * |
5377 | * Return nothing. | |
5378 | */ | |
5379 | void | |
09da0b32 | 5380 | mpt2sas_device_remove_by_sas_address(struct MPT2SAS_ADAPTER *ioc, |
5381 | u64 sas_address) | |
7f6f794d KD |
5382 | { |
5383 | struct _sas_device *sas_device; | |
5384 | unsigned long flags; | |
5385 | ||
5386 | if (ioc->shost_recovery) | |
5387 | return; | |
5388 | ||
5389 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
5390 | sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, | |
5391 | sas_address); | |
09da0b32 | 5392 | if (sas_device) |
5393 | list_del(&sas_device->list); | |
7f6f794d | 5394 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); |
09da0b32 | 5395 | if (sas_device) |
5396 | _scsih_remove_device(ioc, sas_device); | |
7f6f794d | 5397 | } |
635374e7 EM |
5398 | #ifdef CONFIG_SCSI_MPT2SAS_LOGGING |
5399 | /** | |
5400 | * _scsih_sas_topology_change_event_debug - debug for topology event | |
5401 | * @ioc: per adapter object | |
5402 | * @event_data: event data payload | |
5403 | * Context: user. | |
5404 | */ | |
5405 | static void | |
5406 | _scsih_sas_topology_change_event_debug(struct MPT2SAS_ADAPTER *ioc, | |
5407 | Mpi2EventDataSasTopologyChangeList_t *event_data) | |
5408 | { | |
5409 | int i; | |
5410 | u16 handle; | |
5411 | u16 reason_code; | |
5412 | u8 phy_number; | |
5413 | char *status_str = NULL; | |
e7d59c17 | 5414 | u8 link_rate, prev_link_rate; |
635374e7 EM |
5415 | |
5416 | switch (event_data->ExpStatus) { | |
5417 | case MPI2_EVENT_SAS_TOPO_ES_ADDED: | |
5418 | status_str = "add"; | |
5419 | break; | |
5420 | case MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING: | |
5421 | status_str = "remove"; | |
5422 | break; | |
5423 | case MPI2_EVENT_SAS_TOPO_ES_RESPONDING: | |
e7d59c17 | 5424 | case 0: |
635374e7 EM |
5425 | status_str = "responding"; |
5426 | break; | |
5427 | case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING: | |
5428 | status_str = "remove delay"; | |
5429 | break; | |
5430 | default: | |
5431 | status_str = "unknown status"; | |
5432 | break; | |
5433 | } | |
eabb08ad | 5434 | printk(MPT2SAS_INFO_FMT "sas topology change: (%s)\n", |
635374e7 | 5435 | ioc->name, status_str); |
eabb08ad | 5436 | printk(KERN_INFO "\thandle(0x%04x), enclosure_handle(0x%04x) " |
635374e7 EM |
5437 | "start_phy(%02d), count(%d)\n", |
5438 | le16_to_cpu(event_data->ExpanderDevHandle), | |
5439 | le16_to_cpu(event_data->EnclosureHandle), | |
5440 | event_data->StartPhyNum, event_data->NumEntries); | |
5441 | for (i = 0; i < event_data->NumEntries; i++) { | |
5442 | handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); | |
5443 | if (!handle) | |
5444 | continue; | |
5445 | phy_number = event_data->StartPhyNum + i; | |
5446 | reason_code = event_data->PHY[i].PhyStatus & | |
5447 | MPI2_EVENT_SAS_TOPO_RC_MASK; | |
5448 | switch (reason_code) { | |
5449 | case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED: | |
e7d59c17 | 5450 | status_str = "target add"; |
635374e7 EM |
5451 | break; |
5452 | case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING: | |
e7d59c17 | 5453 | status_str = "target remove"; |
635374e7 EM |
5454 | break; |
5455 | case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING: | |
e7d59c17 | 5456 | status_str = "delay target remove"; |
635374e7 EM |
5457 | break; |
5458 | case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED: | |
e7d59c17 | 5459 | status_str = "link rate change"; |
635374e7 EM |
5460 | break; |
5461 | case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE: | |
e7d59c17 | 5462 | status_str = "target responding"; |
635374e7 EM |
5463 | break; |
5464 | default: | |
e7d59c17 | 5465 | status_str = "unknown"; |
635374e7 EM |
5466 | break; |
5467 | } | |
e7d59c17 KD |
5468 | link_rate = event_data->PHY[i].LinkRate >> 4; |
5469 | prev_link_rate = event_data->PHY[i].LinkRate & 0xF; | |
eabb08ad | 5470 | printk(KERN_INFO "\tphy(%02d), attached_handle(0x%04x): %s:" |
e7d59c17 KD |
5471 | " link rate: new(0x%02x), old(0x%02x)\n", phy_number, |
5472 | handle, status_str, link_rate, prev_link_rate); | |
5473 | ||
635374e7 EM |
5474 | } |
5475 | } | |
5476 | #endif | |
5477 | ||
5478 | /** | |
5479 | * _scsih_sas_topology_change_event - handle topology changes | |
5480 | * @ioc: per adapter object | |
7b936b02 | 5481 | * @fw_event: The fw_event_work object |
635374e7 EM |
5482 | * Context: user. |
5483 | * | |
5484 | */ | |
5485 | static void | |
7b936b02 | 5486 | _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, |
635374e7 EM |
5487 | struct fw_event_work *fw_event) |
5488 | { | |
5489 | int i; | |
5490 | u16 parent_handle, handle; | |
5491 | u16 reason_code; | |
b41c09d1 | 5492 | u8 phy_number, max_phys; |
635374e7 | 5493 | struct _sas_node *sas_expander; |
c5e039be | 5494 | u64 sas_address; |
635374e7 | 5495 | unsigned long flags; |
e7d59c17 | 5496 | u8 link_rate, prev_link_rate; |
7b936b02 | 5497 | Mpi2EventDataSasTopologyChangeList_t *event_data = fw_event->event_data; |
635374e7 EM |
5498 | |
5499 | #ifdef CONFIG_SCSI_MPT2SAS_LOGGING | |
5500 | if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) | |
5501 | _scsih_sas_topology_change_event_debug(ioc, event_data); | |
5502 | #endif | |
5503 | ||
918134ef | 5504 | if (ioc->remove_host || ioc->pci_error_recovery) |
c5e039be KD |
5505 | return; |
5506 | ||
635374e7 EM |
5507 | if (!ioc->sas_hba.num_phys) |
5508 | _scsih_sas_host_add(ioc); | |
5509 | else | |
c5e039be | 5510 | _scsih_sas_host_refresh(ioc); |
635374e7 EM |
5511 | |
5512 | if (fw_event->ignore) { | |
eabb08ad | 5513 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "ignoring expander " |
635374e7 EM |
5514 | "event\n", ioc->name)); |
5515 | return; | |
5516 | } | |
5517 | ||
5518 | parent_handle = le16_to_cpu(event_data->ExpanderDevHandle); | |
5519 | ||
5520 | /* handle expander add */ | |
5521 | if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED) | |
5522 | if (_scsih_expander_add(ioc, parent_handle) != 0) | |
5523 | return; | |
5524 | ||
c5e039be KD |
5525 | spin_lock_irqsave(&ioc->sas_node_lock, flags); |
5526 | sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, | |
5527 | parent_handle); | |
b41c09d1 | 5528 | if (sas_expander) { |
c5e039be | 5529 | sas_address = sas_expander->sas_address; |
b41c09d1 KD |
5530 | max_phys = sas_expander->num_phys; |
5531 | } else if (parent_handle < ioc->sas_hba.num_phys) { | |
c5e039be | 5532 | sas_address = ioc->sas_hba.sas_address; |
b41c09d1 | 5533 | max_phys = ioc->sas_hba.num_phys; |
09da0b32 | 5534 | } else { |
5535 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
c5e039be | 5536 | return; |
09da0b32 | 5537 | } |
5538 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
c5e039be | 5539 | |
635374e7 EM |
5540 | /* handle siblings events */ |
5541 | for (i = 0; i < event_data->NumEntries; i++) { | |
5542 | if (fw_event->ignore) { | |
eabb08ad | 5543 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "ignoring " |
635374e7 EM |
5544 | "expander event\n", ioc->name)); |
5545 | return; | |
5546 | } | |
3cb5469a EM |
5547 | if (ioc->shost_recovery || ioc->remove_host || |
5548 | ioc->pci_error_recovery) | |
155dd4c7 | 5549 | return; |
308609c6 | 5550 | phy_number = event_data->StartPhyNum + i; |
b41c09d1 KD |
5551 | if (phy_number >= max_phys) |
5552 | continue; | |
308609c6 KD |
5553 | reason_code = event_data->PHY[i].PhyStatus & |
5554 | MPI2_EVENT_SAS_TOPO_RC_MASK; | |
5555 | if ((event_data->PHY[i].PhyStatus & | |
5556 | MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) && (reason_code != | |
5557 | MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING)) | |
635374e7 EM |
5558 | continue; |
5559 | handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); | |
5560 | if (!handle) | |
5561 | continue; | |
c5e039be | 5562 | link_rate = event_data->PHY[i].LinkRate >> 4; |
e7d59c17 | 5563 | prev_link_rate = event_data->PHY[i].LinkRate & 0xF; |
635374e7 EM |
5564 | switch (reason_code) { |
5565 | case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED: | |
e7d59c17 | 5566 | |
918134ef | 5567 | if (ioc->shost_recovery) |
5568 | break; | |
5569 | ||
e7d59c17 KD |
5570 | if (link_rate == prev_link_rate) |
5571 | break; | |
5572 | ||
5573 | mpt2sas_transport_update_links(ioc, sas_address, | |
5574 | handle, phy_number, link_rate); | |
5575 | ||
b4344276 KD |
5576 | if (link_rate < MPI2_SAS_NEG_LINK_RATE_1_5) |
5577 | break; | |
5578 | ||
5579 | _scsih_check_device(ioc, handle); | |
e7d59c17 | 5580 | break; |
635374e7 | 5581 | case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED: |
c5e039be | 5582 | |
918134ef | 5583 | if (ioc->shost_recovery) |
5584 | break; | |
5585 | ||
c5e039be KD |
5586 | mpt2sas_transport_update_links(ioc, sas_address, |
5587 | handle, phy_number, link_rate); | |
5588 | ||
e7d59c17 | 5589 | _scsih_add_device(ioc, handle, phy_number, 0); |
635374e7 EM |
5590 | break; |
5591 | case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING: | |
c5e039be | 5592 | |
09da0b32 | 5593 | _scsih_device_remove_by_handle(ioc, handle); |
635374e7 EM |
5594 | break; |
5595 | } | |
5596 | } | |
5597 | ||
5598 | /* handle expander removal */ | |
c5e039be KD |
5599 | if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING && |
5600 | sas_expander) | |
7f6f794d | 5601 | mpt2sas_expander_remove(ioc, sas_address); |
635374e7 EM |
5602 | |
5603 | } | |
5604 | ||
5605 | #ifdef CONFIG_SCSI_MPT2SAS_LOGGING | |
5606 | /** | |
5607 | * _scsih_sas_device_status_change_event_debug - debug for device event | |
5608 | * @event_data: event data payload | |
5609 | * Context: user. | |
5610 | * | |
5611 | * Return nothing. | |
5612 | */ | |
5613 | static void | |
5614 | _scsih_sas_device_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc, | |
5615 | Mpi2EventDataSasDeviceStatusChange_t *event_data) | |
5616 | { | |
5617 | char *reason_str = NULL; | |
5618 | ||
5619 | switch (event_data->ReasonCode) { | |
5620 | case MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA: | |
5621 | reason_str = "smart data"; | |
5622 | break; | |
5623 | case MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED: | |
5624 | reason_str = "unsupported device discovered"; | |
5625 | break; | |
5626 | case MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: | |
5627 | reason_str = "internal device reset"; | |
5628 | break; | |
5629 | case MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL: | |
5630 | reason_str = "internal task abort"; | |
5631 | break; | |
5632 | case MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL: | |
5633 | reason_str = "internal task abort set"; | |
5634 | break; | |
5635 | case MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL: | |
5636 | reason_str = "internal clear task set"; | |
5637 | break; | |
5638 | case MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL: | |
5639 | reason_str = "internal query task"; | |
5640 | break; | |
5641 | case MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE: | |
5642 | reason_str = "sata init failure"; | |
5643 | break; | |
5644 | case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET: | |
5645 | reason_str = "internal device reset complete"; | |
5646 | break; | |
5647 | case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL: | |
5648 | reason_str = "internal task abort complete"; | |
5649 | break; | |
5650 | case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION: | |
5651 | reason_str = "internal async notification"; | |
5652 | break; | |
ec6c2b43 KD |
5653 | case MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY: |
5654 | reason_str = "expander reduced functionality"; | |
5655 | break; | |
5656 | case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY: | |
5657 | reason_str = "expander reduced functionality complete"; | |
5658 | break; | |
635374e7 EM |
5659 | default: |
5660 | reason_str = "unknown reason"; | |
5661 | break; | |
5662 | } | |
eabb08ad | 5663 | printk(MPT2SAS_INFO_FMT "device status change: (%s)\n" |
f93213de KD |
5664 | "\thandle(0x%04x), sas address(0x%016llx), tag(%d)", |
5665 | ioc->name, reason_str, le16_to_cpu(event_data->DevHandle), | |
5666 | (unsigned long long)le64_to_cpu(event_data->SASAddress), | |
5667 | le16_to_cpu(event_data->TaskTag)); | |
635374e7 | 5668 | if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA) |
eabb08ad | 5669 | printk(MPT2SAS_INFO_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name, |
635374e7 EM |
5670 | event_data->ASC, event_data->ASCQ); |
5671 | printk(KERN_INFO "\n"); | |
5672 | } | |
5673 | #endif | |
5674 | ||
5675 | /** | |
5676 | * _scsih_sas_device_status_change_event - handle device status change | |
5677 | * @ioc: per adapter object | |
7b936b02 | 5678 | * @fw_event: The fw_event_work object |
635374e7 EM |
5679 | * Context: user. |
5680 | * | |
5681 | * Return nothing. | |
5682 | */ | |
5683 | static void | |
7b936b02 KD |
5684 | _scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc, |
5685 | struct fw_event_work *fw_event) | |
635374e7 | 5686 | { |
8ffc457e KD |
5687 | struct MPT2SAS_TARGET *target_priv_data; |
5688 | struct _sas_device *sas_device; | |
c97951ec | 5689 | u64 sas_address; |
8ffc457e KD |
5690 | unsigned long flags; |
5691 | Mpi2EventDataSasDeviceStatusChange_t *event_data = | |
5692 | fw_event->event_data; | |
5693 | ||
635374e7 EM |
5694 | #ifdef CONFIG_SCSI_MPT2SAS_LOGGING |
5695 | if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) | |
7b936b02 | 5696 | _scsih_sas_device_status_change_event_debug(ioc, |
8ffc457e | 5697 | event_data); |
635374e7 | 5698 | #endif |
8ffc457e | 5699 | |
efe82a16 KD |
5700 | /* In MPI Revision K (0xC), the internal device reset complete was |
5701 | * implemented, so avoid setting tm_busy flag for older firmware. | |
5702 | */ | |
5703 | if ((ioc->facts.HeaderVersion >> 8) < 0xC) | |
5704 | return; | |
5705 | ||
f891dcfd | 5706 | if (event_data->ReasonCode != |
8ffc457e | 5707 | MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET && |
f891dcfd KD |
5708 | event_data->ReasonCode != |
5709 | MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET) | |
8ffc457e KD |
5710 | return; |
5711 | ||
5712 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
5713 | sas_address = le64_to_cpu(event_data->SASAddress); | |
5714 | sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, | |
5715 | sas_address); | |
8ffc457e | 5716 | |
09da0b32 | 5717 | if (!sas_device || !sas_device->starget) { |
5718 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
8ffc457e | 5719 | return; |
09da0b32 | 5720 | } |
8ffc457e KD |
5721 | |
5722 | target_priv_data = sas_device->starget->hostdata; | |
09da0b32 | 5723 | if (!target_priv_data) { |
5724 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
8ffc457e | 5725 | return; |
09da0b32 | 5726 | } |
8ffc457e KD |
5727 | |
5728 | if (event_data->ReasonCode == | |
5729 | MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET) | |
5730 | target_priv_data->tm_busy = 1; | |
5731 | else | |
5732 | target_priv_data->tm_busy = 0; | |
09da0b32 | 5733 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); |
635374e7 EM |
5734 | } |
5735 | ||
5736 | #ifdef CONFIG_SCSI_MPT2SAS_LOGGING | |
5737 | /** | |
5738 | * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure event | |
5739 | * @ioc: per adapter object | |
5740 | * @event_data: event data payload | |
5741 | * Context: user. | |
5742 | * | |
5743 | * Return nothing. | |
5744 | */ | |
5745 | static void | |
5746 | _scsih_sas_enclosure_dev_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc, | |
5747 | Mpi2EventDataSasEnclDevStatusChange_t *event_data) | |
5748 | { | |
5749 | char *reason_str = NULL; | |
5750 | ||
5751 | switch (event_data->ReasonCode) { | |
5752 | case MPI2_EVENT_SAS_ENCL_RC_ADDED: | |
5753 | reason_str = "enclosure add"; | |
5754 | break; | |
5755 | case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING: | |
5756 | reason_str = "enclosure remove"; | |
5757 | break; | |
5758 | default: | |
5759 | reason_str = "unknown reason"; | |
5760 | break; | |
5761 | } | |
5762 | ||
eabb08ad | 5763 | printk(MPT2SAS_INFO_FMT "enclosure status change: (%s)\n" |
635374e7 EM |
5764 | "\thandle(0x%04x), enclosure logical id(0x%016llx)" |
5765 | " number slots(%d)\n", ioc->name, reason_str, | |
5766 | le16_to_cpu(event_data->EnclosureHandle), | |
5767 | (unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID), | |
5768 | le16_to_cpu(event_data->StartSlot)); | |
5769 | } | |
5770 | #endif | |
5771 | ||
5772 | /** | |
5773 | * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events | |
5774 | * @ioc: per adapter object | |
7b936b02 | 5775 | * @fw_event: The fw_event_work object |
635374e7 EM |
5776 | * Context: user. |
5777 | * | |
5778 | * Return nothing. | |
5779 | */ | |
5780 | static void | |
5781 | _scsih_sas_enclosure_dev_status_change_event(struct MPT2SAS_ADAPTER *ioc, | |
7b936b02 | 5782 | struct fw_event_work *fw_event) |
635374e7 EM |
5783 | { |
5784 | #ifdef CONFIG_SCSI_MPT2SAS_LOGGING | |
5785 | if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) | |
5786 | _scsih_sas_enclosure_dev_status_change_event_debug(ioc, | |
7b936b02 | 5787 | fw_event->event_data); |
635374e7 EM |
5788 | #endif |
5789 | } | |
5790 | ||
5791 | /** | |
a78e21dc | 5792 | * _scsih_sas_broadcast_primitive_event - handle broadcast events |
635374e7 | 5793 | * @ioc: per adapter object |
7b936b02 | 5794 | * @fw_event: The fw_event_work object |
635374e7 EM |
5795 | * Context: user. |
5796 | * | |
5797 | * Return nothing. | |
5798 | */ | |
5799 | static void | |
a78e21dc | 5800 | _scsih_sas_broadcast_primitive_event(struct MPT2SAS_ADAPTER *ioc, |
7b936b02 | 5801 | struct fw_event_work *fw_event) |
635374e7 EM |
5802 | { |
5803 | struct scsi_cmnd *scmd; | |
ec07a053 | 5804 | struct scsi_device *sdev; |
635374e7 EM |
5805 | u16 smid, handle; |
5806 | u32 lun; | |
5807 | struct MPT2SAS_DEVICE *sas_device_priv_data; | |
5808 | u32 termination_count; | |
5809 | u32 query_count; | |
5810 | Mpi2SCSITaskManagementReply_t *mpi_reply; | |
7b936b02 | 5811 | Mpi2EventDataSasBroadcastPrimitive_t *event_data = fw_event->event_data; |
463217bf | 5812 | u16 ioc_status; |
ec07a053 KD |
5813 | unsigned long flags; |
5814 | int r; | |
f93213de KD |
5815 | u8 max_retries = 0; |
5816 | u8 task_abort_retries; | |
ec07a053 | 5817 | |
f93213de KD |
5818 | mutex_lock(&ioc->tm_cmds.mutex); |
5819 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: phy number(%d), " | |
5820 | "width(%d)\n", ioc->name, __func__, event_data->PhyNum, | |
5821 | event_data->PortWidth)); | |
5822 | ||
5823 | _scsih_block_io_all_device(ioc); | |
635374e7 | 5824 | |
ec07a053 | 5825 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
f93213de KD |
5826 | mpi_reply = ioc->tm_cmds.reply; |
5827 | broadcast_aen_retry: | |
5828 | ||
5829 | /* sanity checks for retrying this loop */ | |
5830 | if (max_retries++ == 5) { | |
5831 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: giving up\n", | |
5832 | ioc->name, __func__)); | |
5833 | goto out; | |
5834 | } else if (max_retries > 1) | |
5835 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: %d retry\n", | |
5836 | ioc->name, __func__, max_retries - 1)); | |
5837 | ||
635374e7 EM |
5838 | termination_count = 0; |
5839 | query_count = 0; | |
595bb0bd | 5840 | for (smid = 1; smid <= ioc->scsiio_depth; smid++) { |
921cd802 | 5841 | if (ioc->shost_recovery) |
f93213de | 5842 | goto out; |
635374e7 EM |
5843 | scmd = _scsih_scsi_lookup_get(ioc, smid); |
5844 | if (!scmd) | |
5845 | continue; | |
ec07a053 KD |
5846 | sdev = scmd->device; |
5847 | sas_device_priv_data = sdev->hostdata; | |
635374e7 EM |
5848 | if (!sas_device_priv_data || !sas_device_priv_data->sas_target) |
5849 | continue; | |
5850 | /* skip hidden raid components */ | |
5851 | if (sas_device_priv_data->sas_target->flags & | |
5852 | MPT_TARGET_FLAGS_RAID_COMPONENT) | |
5853 | continue; | |
5854 | /* skip volumes */ | |
5855 | if (sas_device_priv_data->sas_target->flags & | |
5856 | MPT_TARGET_FLAGS_VOLUME) | |
5857 | continue; | |
5858 | ||
5859 | handle = sas_device_priv_data->sas_target->handle; | |
5860 | lun = sas_device_priv_data->lun; | |
5861 | query_count++; | |
5862 | ||
921cd802 | 5863 | if (ioc->shost_recovery) |
f93213de KD |
5864 | goto out; |
5865 | ||
ec07a053 | 5866 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
f93213de KD |
5867 | r = mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun, |
5868 | MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30, 0, | |
5869 | TM_MUTEX_OFF); | |
5870 | if (r == FAILED) { | |
5871 | sdev_printk(KERN_WARNING, sdev, | |
5872 | "mpt2sas_scsih_issue_tm: FAILED when sending " | |
5873 | "QUERY_TASK: scmd(%p)\n", scmd); | |
5874 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); | |
5875 | goto broadcast_aen_retry; | |
5876 | } | |
463217bf KD |
5877 | ioc_status = le16_to_cpu(mpi_reply->IOCStatus) |
5878 | & MPI2_IOCSTATUS_MASK; | |
f93213de KD |
5879 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { |
5880 | sdev_printk(KERN_WARNING, sdev, "query task: FAILED " | |
5881 | "with IOCSTATUS(0x%04x), scmd(%p)\n", ioc_status, | |
5882 | scmd); | |
5883 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); | |
5884 | goto broadcast_aen_retry; | |
5885 | } | |
5886 | ||
5887 | /* see if IO is still owned by IOC and target */ | |
5888 | if (mpi_reply->ResponseCode == | |
635374e7 EM |
5889 | MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED || |
5890 | mpi_reply->ResponseCode == | |
f93213de | 5891 | MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC) { |
ec07a053 | 5892 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
635374e7 | 5893 | continue; |
ec07a053 | 5894 | } |
f93213de KD |
5895 | task_abort_retries = 0; |
5896 | tm_retry: | |
5897 | if (task_abort_retries++ == 60) { | |
5898 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT | |
5899 | "%s: ABORT_TASK: giving up\n", ioc->name, | |
5900 | __func__)); | |
5901 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); | |
5902 | goto broadcast_aen_retry; | |
5903 | } | |
5904 | ||
921cd802 | 5905 | if (ioc->shost_recovery) |
f93213de KD |
5906 | goto out_no_lock; |
5907 | ||
ec07a053 KD |
5908 | r = mpt2sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id, |
5909 | sdev->lun, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30, | |
f93213de KD |
5910 | scmd->serial_number, TM_MUTEX_OFF); |
5911 | if (r == FAILED) { | |
5912 | sdev_printk(KERN_WARNING, sdev, | |
5913 | "mpt2sas_scsih_issue_tm: ABORT_TASK: FAILED : " | |
ec07a053 | 5914 | "scmd(%p)\n", scmd); |
f93213de KD |
5915 | goto tm_retry; |
5916 | } | |
5917 | ||
5918 | if (task_abort_retries > 1) | |
5919 | sdev_printk(KERN_WARNING, sdev, | |
5920 | "mpt2sas_scsih_issue_tm: ABORT_TASK: RETRIES (%d):" | |
5921 | " scmd(%p)\n", | |
5922 | task_abort_retries - 1, scmd); | |
5923 | ||
635374e7 | 5924 | termination_count += le32_to_cpu(mpi_reply->TerminationCount); |
ec07a053 | 5925 | spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
635374e7 | 5926 | } |
f93213de KD |
5927 | |
5928 | if (ioc->broadcast_aen_pending) { | |
5929 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: loop back due to" | |
5930 | " pending AEN\n", ioc->name, __func__)); | |
5931 | ioc->broadcast_aen_pending = 0; | |
5932 | goto broadcast_aen_retry; | |
5933 | } | |
5934 | ||
5935 | out: | |
ec07a053 | 5936 | spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
f93213de | 5937 | out_no_lock: |
635374e7 | 5938 | |
f93213de | 5939 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT |
635374e7 EM |
5940 | "%s - exit, query_count = %d termination_count = %d\n", |
5941 | ioc->name, __func__, query_count, termination_count)); | |
f93213de KD |
5942 | |
5943 | ioc->broadcast_aen_busy = 0; | |
921cd802 | 5944 | if (!ioc->shost_recovery) |
f93213de KD |
5945 | _scsih_ublock_io_all_device(ioc); |
5946 | mutex_unlock(&ioc->tm_cmds.mutex); | |
635374e7 EM |
5947 | } |
5948 | ||
5949 | /** | |
5950 | * _scsih_sas_discovery_event - handle discovery events | |
5951 | * @ioc: per adapter object | |
7b936b02 | 5952 | * @fw_event: The fw_event_work object |
635374e7 EM |
5953 | * Context: user. |
5954 | * | |
5955 | * Return nothing. | |
5956 | */ | |
5957 | static void | |
7b936b02 KD |
5958 | _scsih_sas_discovery_event(struct MPT2SAS_ADAPTER *ioc, |
5959 | struct fw_event_work *fw_event) | |
635374e7 | 5960 | { |
7b936b02 KD |
5961 | Mpi2EventDataSasDiscovery_t *event_data = fw_event->event_data; |
5962 | ||
635374e7 EM |
5963 | #ifdef CONFIG_SCSI_MPT2SAS_LOGGING |
5964 | if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) { | |
eabb08ad | 5965 | printk(MPT2SAS_INFO_FMT "discovery event: (%s)", ioc->name, |
635374e7 EM |
5966 | (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ? |
5967 | "start" : "stop"); | |
5968 | if (event_data->DiscoveryStatus) | |
595bb0bd KD |
5969 | printk("discovery_status(0x%08x)", |
5970 | le32_to_cpu(event_data->DiscoveryStatus)); | |
635374e7 EM |
5971 | printk("\n"); |
5972 | } | |
5973 | #endif | |
5974 | ||
5975 | if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED && | |
5976 | !ioc->sas_hba.num_phys) | |
5977 | _scsih_sas_host_add(ioc); | |
5978 | } | |
5979 | ||
5980 | /** | |
5981 | * _scsih_reprobe_lun - reprobing lun | |
5982 | * @sdev: scsi device struct | |
5983 | * @no_uld_attach: sdev->no_uld_attach flag setting | |
5984 | * | |
5985 | **/ | |
5986 | static void | |
5987 | _scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach) | |
5988 | { | |
5989 | int rc; | |
5990 | ||
5991 | sdev->no_uld_attach = no_uld_attach ? 1 : 0; | |
5992 | sdev_printk(KERN_INFO, sdev, "%s raid component\n", | |
5993 | sdev->no_uld_attach ? "hidding" : "exposing"); | |
5994 | rc = scsi_device_reprobe(sdev); | |
5995 | } | |
5996 | ||
635374e7 EM |
5997 | /** |
5998 | * _scsih_sas_volume_add - add new volume | |
5999 | * @ioc: per adapter object | |
6000 | * @element: IR config element data | |
6001 | * Context: user. | |
6002 | * | |
6003 | * Return nothing. | |
6004 | */ | |
6005 | static void | |
6006 | _scsih_sas_volume_add(struct MPT2SAS_ADAPTER *ioc, | |
6007 | Mpi2EventIrConfigElement_t *element) | |
6008 | { | |
6009 | struct _raid_device *raid_device; | |
6010 | unsigned long flags; | |
6011 | u64 wwid; | |
6012 | u16 handle = le16_to_cpu(element->VolDevHandle); | |
6013 | int rc; | |
6014 | ||
635374e7 EM |
6015 | mpt2sas_config_get_volume_wwid(ioc, handle, &wwid); |
6016 | if (!wwid) { | |
6017 | printk(MPT2SAS_ERR_FMT | |
6018 | "failure at %s:%d/%s()!\n", ioc->name, | |
6019 | __FILE__, __LINE__, __func__); | |
6020 | return; | |
6021 | } | |
6022 | ||
6023 | spin_lock_irqsave(&ioc->raid_device_lock, flags); | |
6024 | raid_device = _scsih_raid_device_find_by_wwid(ioc, wwid); | |
6025 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); | |
6026 | ||
6027 | if (raid_device) | |
6028 | return; | |
6029 | ||
6030 | raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL); | |
6031 | if (!raid_device) { | |
6032 | printk(MPT2SAS_ERR_FMT | |
6033 | "failure at %s:%d/%s()!\n", ioc->name, | |
6034 | __FILE__, __LINE__, __func__); | |
6035 | return; | |
6036 | } | |
6037 | ||
6038 | raid_device->id = ioc->sas_id++; | |
6039 | raid_device->channel = RAID_CHANNEL; | |
6040 | raid_device->handle = handle; | |
6041 | raid_device->wwid = wwid; | |
6042 | _scsih_raid_device_add(ioc, raid_device); | |
921cd802 | 6043 | if (!ioc->wait_for_discovery_to_complete) { |
635374e7 EM |
6044 | rc = scsi_add_device(ioc->shost, RAID_CHANNEL, |
6045 | raid_device->id, 0); | |
6046 | if (rc) | |
6047 | _scsih_raid_device_remove(ioc, raid_device); | |
09da0b32 | 6048 | } else { |
6049 | spin_lock_irqsave(&ioc->raid_device_lock, flags); | |
635374e7 | 6050 | _scsih_determine_boot_device(ioc, raid_device, 1); |
09da0b32 | 6051 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); |
6052 | } | |
635374e7 EM |
6053 | } |
6054 | ||
6055 | /** | |
6056 | * _scsih_sas_volume_delete - delete volume | |
6057 | * @ioc: per adapter object | |
f3eedd69 | 6058 | * @handle: volume device handle |
635374e7 EM |
6059 | * Context: user. |
6060 | * | |
6061 | * Return nothing. | |
6062 | */ | |
6063 | static void | |
f3eedd69 | 6064 | _scsih_sas_volume_delete(struct MPT2SAS_ADAPTER *ioc, u16 handle) |
635374e7 EM |
6065 | { |
6066 | struct _raid_device *raid_device; | |
635374e7 EM |
6067 | unsigned long flags; |
6068 | struct MPT2SAS_TARGET *sas_target_priv_data; | |
09da0b32 | 6069 | struct scsi_target *starget = NULL; |
635374e7 | 6070 | |
635374e7 EM |
6071 | spin_lock_irqsave(&ioc->raid_device_lock, flags); |
6072 | raid_device = _scsih_raid_device_find_by_handle(ioc, handle); | |
09da0b32 | 6073 | if (raid_device) { |
6074 | if (raid_device->starget) { | |
6075 | starget = raid_device->starget; | |
6076 | sas_target_priv_data = starget->hostdata; | |
6077 | sas_target_priv_data->deleted = 1; | |
6078 | } | |
6079 | printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid" | |
6080 | "(0x%016llx)\n", ioc->name, raid_device->handle, | |
6081 | (unsigned long long) raid_device->wwid); | |
6082 | list_del(&raid_device->list); | |
6083 | kfree(raid_device); | |
635374e7 | 6084 | } |
09da0b32 | 6085 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); |
6086 | if (starget) | |
6087 | scsi_remove_target(&starget->dev); | |
635374e7 EM |
6088 | } |
6089 | ||
6090 | /** | |
6091 | * _scsih_sas_pd_expose - expose pd component to /dev/sdX | |
6092 | * @ioc: per adapter object | |
6093 | * @element: IR config element data | |
6094 | * Context: user. | |
6095 | * | |
6096 | * Return nothing. | |
6097 | */ | |
6098 | static void | |
6099 | _scsih_sas_pd_expose(struct MPT2SAS_ADAPTER *ioc, | |
6100 | Mpi2EventIrConfigElement_t *element) | |
6101 | { | |
6102 | struct _sas_device *sas_device; | |
09da0b32 | 6103 | struct scsi_target *starget = NULL; |
6104 | struct MPT2SAS_TARGET *sas_target_priv_data; | |
635374e7 EM |
6105 | unsigned long flags; |
6106 | u16 handle = le16_to_cpu(element->PhysDiskDevHandle); | |
6107 | ||
6108 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
6109 | sas_device = _scsih_sas_device_find_by_handle(ioc, handle); | |
09da0b32 | 6110 | if (sas_device) { |
6111 | sas_device->volume_handle = 0; | |
6112 | sas_device->volume_wwid = 0; | |
6113 | clear_bit(handle, ioc->pd_handles); | |
6114 | if (sas_device->starget && sas_device->starget->hostdata) { | |
6115 | starget = sas_device->starget; | |
6116 | sas_target_priv_data = starget->hostdata; | |
6117 | sas_target_priv_data->flags &= | |
6118 | ~MPT_TARGET_FLAGS_RAID_COMPONENT; | |
6119 | } | |
6120 | } | |
635374e7 EM |
6121 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); |
6122 | if (!sas_device) | |
6123 | return; | |
6124 | ||
6125 | /* exposing raid component */ | |
09da0b32 | 6126 | if (starget) |
6127 | starget_for_each_device(starget, NULL, _scsih_reprobe_lun); | |
635374e7 EM |
6128 | } |
6129 | ||
6130 | /** | |
6131 | * _scsih_sas_pd_hide - hide pd component from /dev/sdX | |
6132 | * @ioc: per adapter object | |
6133 | * @element: IR config element data | |
6134 | * Context: user. | |
6135 | * | |
6136 | * Return nothing. | |
6137 | */ | |
6138 | static void | |
6139 | _scsih_sas_pd_hide(struct MPT2SAS_ADAPTER *ioc, | |
6140 | Mpi2EventIrConfigElement_t *element) | |
6141 | { | |
6142 | struct _sas_device *sas_device; | |
09da0b32 | 6143 | struct scsi_target *starget = NULL; |
6144 | struct MPT2SAS_TARGET *sas_target_priv_data; | |
635374e7 EM |
6145 | unsigned long flags; |
6146 | u16 handle = le16_to_cpu(element->PhysDiskDevHandle); | |
09da0b32 | 6147 | u16 volume_handle = 0; |
6148 | u64 volume_wwid = 0; | |
6149 | ||
6150 | mpt2sas_config_get_volume_handle(ioc, handle, &volume_handle); | |
6151 | if (volume_handle) | |
6152 | mpt2sas_config_get_volume_wwid(ioc, volume_handle, | |
6153 | &volume_wwid); | |
635374e7 EM |
6154 | |
6155 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
6156 | sas_device = _scsih_sas_device_find_by_handle(ioc, handle); | |
09da0b32 | 6157 | if (sas_device) { |
6158 | set_bit(handle, ioc->pd_handles); | |
6159 | if (sas_device->starget && sas_device->starget->hostdata) { | |
6160 | starget = sas_device->starget; | |
6161 | sas_target_priv_data = starget->hostdata; | |
6162 | sas_target_priv_data->flags |= | |
6163 | MPT_TARGET_FLAGS_RAID_COMPONENT; | |
6164 | sas_device->volume_handle = volume_handle; | |
6165 | sas_device->volume_wwid = volume_wwid; | |
6166 | } | |
6167 | } | |
635374e7 EM |
6168 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); |
6169 | if (!sas_device) | |
6170 | return; | |
6171 | ||
6172 | /* hiding raid component */ | |
09da0b32 | 6173 | if (starget) |
6174 | starget_for_each_device(starget, (void *)1, _scsih_reprobe_lun); | |
635374e7 EM |
6175 | } |
6176 | ||
6177 | /** | |
6178 | * _scsih_sas_pd_delete - delete pd component | |
6179 | * @ioc: per adapter object | |
6180 | * @element: IR config element data | |
6181 | * Context: user. | |
6182 | * | |
6183 | * Return nothing. | |
6184 | */ | |
6185 | static void | |
6186 | _scsih_sas_pd_delete(struct MPT2SAS_ADAPTER *ioc, | |
6187 | Mpi2EventIrConfigElement_t *element) | |
6188 | { | |
635374e7 EM |
6189 | u16 handle = le16_to_cpu(element->PhysDiskDevHandle); |
6190 | ||
09da0b32 | 6191 | _scsih_device_remove_by_handle(ioc, handle); |
635374e7 EM |
6192 | } |
6193 | ||
6194 | /** | |
6195 | * _scsih_sas_pd_add - remove pd component | |
6196 | * @ioc: per adapter object | |
6197 | * @element: IR config element data | |
6198 | * Context: user. | |
6199 | * | |
6200 | * Return nothing. | |
6201 | */ | |
6202 | static void | |
6203 | _scsih_sas_pd_add(struct MPT2SAS_ADAPTER *ioc, | |
6204 | Mpi2EventIrConfigElement_t *element) | |
6205 | { | |
6206 | struct _sas_device *sas_device; | |
6207 | unsigned long flags; | |
6208 | u16 handle = le16_to_cpu(element->PhysDiskDevHandle); | |
62727a7b KD |
6209 | Mpi2ConfigReply_t mpi_reply; |
6210 | Mpi2SasDevicePage0_t sas_device_pg0; | |
6211 | u32 ioc_status; | |
c5e039be KD |
6212 | u64 sas_address; |
6213 | u16 parent_handle; | |
635374e7 | 6214 | |
f3eedd69 KD |
6215 | set_bit(handle, ioc->pd_handles); |
6216 | ||
635374e7 EM |
6217 | spin_lock_irqsave(&ioc->sas_device_lock, flags); |
6218 | sas_device = _scsih_sas_device_find_by_handle(ioc, handle); | |
6219 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
f3eedd69 | 6220 | if (sas_device) |
62727a7b | 6221 | return; |
62727a7b KD |
6222 | |
6223 | if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, | |
6224 | MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { | |
6225 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
6226 | ioc->name, __FILE__, __LINE__, __func__); | |
6227 | return; | |
6228 | } | |
6229 | ||
6230 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
6231 | MPI2_IOCSTATUS_MASK; | |
6232 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { | |
6233 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
6234 | ioc->name, __FILE__, __LINE__, __func__); | |
6235 | return; | |
6236 | } | |
6237 | ||
c5e039be KD |
6238 | parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); |
6239 | if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) | |
6240 | mpt2sas_transport_update_links(ioc, sas_address, handle, | |
6241 | sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); | |
62727a7b KD |
6242 | |
6243 | _scsih_add_device(ioc, handle, 0, 1); | |
635374e7 EM |
6244 | } |
6245 | ||
6246 | #ifdef CONFIG_SCSI_MPT2SAS_LOGGING | |
6247 | /** | |
6248 | * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events | |
6249 | * @ioc: per adapter object | |
6250 | * @event_data: event data payload | |
6251 | * Context: user. | |
6252 | * | |
6253 | * Return nothing. | |
6254 | */ | |
6255 | static void | |
6256 | _scsih_sas_ir_config_change_event_debug(struct MPT2SAS_ADAPTER *ioc, | |
6257 | Mpi2EventDataIrConfigChangeList_t *event_data) | |
6258 | { | |
6259 | Mpi2EventIrConfigElement_t *element; | |
6260 | u8 element_type; | |
6261 | int i; | |
6262 | char *reason_str = NULL, *element_str = NULL; | |
6263 | ||
6264 | element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; | |
6265 | ||
eabb08ad | 6266 | printk(MPT2SAS_INFO_FMT "raid config change: (%s), elements(%d)\n", |
635374e7 EM |
6267 | ioc->name, (le32_to_cpu(event_data->Flags) & |
6268 | MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? | |
6269 | "foreign" : "native", event_data->NumElements); | |
6270 | for (i = 0; i < event_data->NumElements; i++, element++) { | |
6271 | switch (element->ReasonCode) { | |
6272 | case MPI2_EVENT_IR_CHANGE_RC_ADDED: | |
6273 | reason_str = "add"; | |
6274 | break; | |
6275 | case MPI2_EVENT_IR_CHANGE_RC_REMOVED: | |
6276 | reason_str = "remove"; | |
6277 | break; | |
6278 | case MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE: | |
6279 | reason_str = "no change"; | |
6280 | break; | |
6281 | case MPI2_EVENT_IR_CHANGE_RC_HIDE: | |
6282 | reason_str = "hide"; | |
6283 | break; | |
6284 | case MPI2_EVENT_IR_CHANGE_RC_UNHIDE: | |
6285 | reason_str = "unhide"; | |
6286 | break; | |
6287 | case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED: | |
6288 | reason_str = "volume_created"; | |
6289 | break; | |
6290 | case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED: | |
6291 | reason_str = "volume_deleted"; | |
6292 | break; | |
6293 | case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED: | |
6294 | reason_str = "pd_created"; | |
6295 | break; | |
6296 | case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED: | |
6297 | reason_str = "pd_deleted"; | |
6298 | break; | |
6299 | default: | |
6300 | reason_str = "unknown reason"; | |
6301 | break; | |
6302 | } | |
6303 | element_type = le16_to_cpu(element->ElementFlags) & | |
6304 | MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK; | |
6305 | switch (element_type) { | |
6306 | case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT: | |
6307 | element_str = "volume"; | |
6308 | break; | |
6309 | case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT: | |
6310 | element_str = "phys disk"; | |
6311 | break; | |
6312 | case MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT: | |
6313 | element_str = "hot spare"; | |
6314 | break; | |
6315 | default: | |
6316 | element_str = "unknown element"; | |
6317 | break; | |
6318 | } | |
eabb08ad | 6319 | printk(KERN_INFO "\t(%s:%s), vol handle(0x%04x), " |
635374e7 EM |
6320 | "pd handle(0x%04x), pd num(0x%02x)\n", element_str, |
6321 | reason_str, le16_to_cpu(element->VolDevHandle), | |
6322 | le16_to_cpu(element->PhysDiskDevHandle), | |
6323 | element->PhysDiskNum); | |
6324 | } | |
6325 | } | |
6326 | #endif | |
6327 | ||
6328 | /** | |
6329 | * _scsih_sas_ir_config_change_event - handle ir configuration change events | |
6330 | * @ioc: per adapter object | |
7b936b02 | 6331 | * @fw_event: The fw_event_work object |
635374e7 EM |
6332 | * Context: user. |
6333 | * | |
6334 | * Return nothing. | |
6335 | */ | |
6336 | static void | |
7b936b02 KD |
6337 | _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, |
6338 | struct fw_event_work *fw_event) | |
635374e7 EM |
6339 | { |
6340 | Mpi2EventIrConfigElement_t *element; | |
6341 | int i; | |
62727a7b | 6342 | u8 foreign_config; |
7b936b02 | 6343 | Mpi2EventDataIrConfigChangeList_t *event_data = fw_event->event_data; |
635374e7 EM |
6344 | |
6345 | #ifdef CONFIG_SCSI_MPT2SAS_LOGGING | |
0bdccdb0 KD |
6346 | if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) |
6347 | && !ioc->hide_ir_msg) | |
635374e7 EM |
6348 | _scsih_sas_ir_config_change_event_debug(ioc, event_data); |
6349 | ||
6350 | #endif | |
921cd802 | 6351 | |
6352 | if (ioc->shost_recovery) | |
6353 | return; | |
6354 | ||
62727a7b KD |
6355 | foreign_config = (le32_to_cpu(event_data->Flags) & |
6356 | MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0; | |
635374e7 EM |
6357 | |
6358 | element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; | |
6359 | for (i = 0; i < event_data->NumElements; i++, element++) { | |
6360 | ||
6361 | switch (element->ReasonCode) { | |
6362 | case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED: | |
6363 | case MPI2_EVENT_IR_CHANGE_RC_ADDED: | |
62727a7b KD |
6364 | if (!foreign_config) |
6365 | _scsih_sas_volume_add(ioc, element); | |
635374e7 EM |
6366 | break; |
6367 | case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED: | |
6368 | case MPI2_EVENT_IR_CHANGE_RC_REMOVED: | |
62727a7b | 6369 | if (!foreign_config) |
f3eedd69 KD |
6370 | _scsih_sas_volume_delete(ioc, |
6371 | le16_to_cpu(element->VolDevHandle)); | |
635374e7 EM |
6372 | break; |
6373 | case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED: | |
0bdccdb0 KD |
6374 | if (!ioc->is_warpdrive) |
6375 | _scsih_sas_pd_hide(ioc, element); | |
635374e7 EM |
6376 | break; |
6377 | case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED: | |
0bdccdb0 KD |
6378 | if (!ioc->is_warpdrive) |
6379 | _scsih_sas_pd_expose(ioc, element); | |
635374e7 EM |
6380 | break; |
6381 | case MPI2_EVENT_IR_CHANGE_RC_HIDE: | |
0bdccdb0 KD |
6382 | if (!ioc->is_warpdrive) |
6383 | _scsih_sas_pd_add(ioc, element); | |
635374e7 EM |
6384 | break; |
6385 | case MPI2_EVENT_IR_CHANGE_RC_UNHIDE: | |
0bdccdb0 KD |
6386 | if (!ioc->is_warpdrive) |
6387 | _scsih_sas_pd_delete(ioc, element); | |
635374e7 EM |
6388 | break; |
6389 | } | |
6390 | } | |
6391 | } | |
6392 | ||
6393 | /** | |
6394 | * _scsih_sas_ir_volume_event - IR volume event | |
6395 | * @ioc: per adapter object | |
7b936b02 | 6396 | * @fw_event: The fw_event_work object |
635374e7 EM |
6397 | * Context: user. |
6398 | * | |
6399 | * Return nothing. | |
6400 | */ | |
6401 | static void | |
7b936b02 KD |
6402 | _scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc, |
6403 | struct fw_event_work *fw_event) | |
635374e7 EM |
6404 | { |
6405 | u64 wwid; | |
6406 | unsigned long flags; | |
6407 | struct _raid_device *raid_device; | |
6408 | u16 handle; | |
6409 | u32 state; | |
6410 | int rc; | |
7b936b02 | 6411 | Mpi2EventDataIrVolume_t *event_data = fw_event->event_data; |
635374e7 | 6412 | |
921cd802 | 6413 | if (ioc->shost_recovery) |
6414 | return; | |
6415 | ||
635374e7 EM |
6416 | if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED) |
6417 | return; | |
6418 | ||
6419 | handle = le16_to_cpu(event_data->VolDevHandle); | |
6420 | state = le32_to_cpu(event_data->NewValue); | |
0bdccdb0 KD |
6421 | if (!ioc->hide_ir_msg) |
6422 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), " | |
6423 | "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle, | |
6424 | le32_to_cpu(event_data->PreviousValue), state)); | |
635374e7 | 6425 | |
635374e7 EM |
6426 | switch (state) { |
6427 | case MPI2_RAID_VOL_STATE_MISSING: | |
6428 | case MPI2_RAID_VOL_STATE_FAILED: | |
f3eedd69 | 6429 | _scsih_sas_volume_delete(ioc, handle); |
635374e7 EM |
6430 | break; |
6431 | ||
6432 | case MPI2_RAID_VOL_STATE_ONLINE: | |
6433 | case MPI2_RAID_VOL_STATE_DEGRADED: | |
6434 | case MPI2_RAID_VOL_STATE_OPTIMAL: | |
f3eedd69 KD |
6435 | |
6436 | spin_lock_irqsave(&ioc->raid_device_lock, flags); | |
6437 | raid_device = _scsih_raid_device_find_by_handle(ioc, handle); | |
6438 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); | |
6439 | ||
635374e7 EM |
6440 | if (raid_device) |
6441 | break; | |
6442 | ||
6443 | mpt2sas_config_get_volume_wwid(ioc, handle, &wwid); | |
6444 | if (!wwid) { | |
6445 | printk(MPT2SAS_ERR_FMT | |
6446 | "failure at %s:%d/%s()!\n", ioc->name, | |
6447 | __FILE__, __LINE__, __func__); | |
6448 | break; | |
6449 | } | |
6450 | ||
6451 | raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL); | |
6452 | if (!raid_device) { | |
6453 | printk(MPT2SAS_ERR_FMT | |
6454 | "failure at %s:%d/%s()!\n", ioc->name, | |
6455 | __FILE__, __LINE__, __func__); | |
6456 | break; | |
6457 | } | |
6458 | ||
6459 | raid_device->id = ioc->sas_id++; | |
6460 | raid_device->channel = RAID_CHANNEL; | |
6461 | raid_device->handle = handle; | |
6462 | raid_device->wwid = wwid; | |
6463 | _scsih_raid_device_add(ioc, raid_device); | |
6464 | rc = scsi_add_device(ioc->shost, RAID_CHANNEL, | |
6465 | raid_device->id, 0); | |
6466 | if (rc) | |
6467 | _scsih_raid_device_remove(ioc, raid_device); | |
6468 | break; | |
6469 | ||
6470 | case MPI2_RAID_VOL_STATE_INITIALIZING: | |
6471 | default: | |
6472 | break; | |
6473 | } | |
6474 | } | |
6475 | ||
6476 | /** | |
6477 | * _scsih_sas_ir_physical_disk_event - PD event | |
6478 | * @ioc: per adapter object | |
7b936b02 | 6479 | * @fw_event: The fw_event_work object |
635374e7 EM |
6480 | * Context: user. |
6481 | * | |
6482 | * Return nothing. | |
6483 | */ | |
6484 | static void | |
7b936b02 KD |
6485 | _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, |
6486 | struct fw_event_work *fw_event) | |
635374e7 | 6487 | { |
c5e039be | 6488 | u16 handle, parent_handle; |
635374e7 EM |
6489 | u32 state; |
6490 | struct _sas_device *sas_device; | |
6491 | unsigned long flags; | |
62727a7b KD |
6492 | Mpi2ConfigReply_t mpi_reply; |
6493 | Mpi2SasDevicePage0_t sas_device_pg0; | |
6494 | u32 ioc_status; | |
7b936b02 | 6495 | Mpi2EventDataIrPhysicalDisk_t *event_data = fw_event->event_data; |
c5e039be | 6496 | u64 sas_address; |
635374e7 | 6497 | |
921cd802 | 6498 | if (ioc->shost_recovery) |
6499 | return; | |
6500 | ||
635374e7 EM |
6501 | if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED) |
6502 | return; | |
6503 | ||
6504 | handle = le16_to_cpu(event_data->PhysDiskDevHandle); | |
6505 | state = le32_to_cpu(event_data->NewValue); | |
6506 | ||
0bdccdb0 KD |
6507 | if (!ioc->hide_ir_msg) |
6508 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), " | |
6509 | "old(0x%08x), new(0x%08x)\n", ioc->name, __func__, handle, | |
6510 | le32_to_cpu(event_data->PreviousValue), state)); | |
635374e7 | 6511 | |
635374e7 | 6512 | switch (state) { |
635374e7 EM |
6513 | case MPI2_RAID_PD_STATE_ONLINE: |
6514 | case MPI2_RAID_PD_STATE_DEGRADED: | |
6515 | case MPI2_RAID_PD_STATE_REBUILDING: | |
6516 | case MPI2_RAID_PD_STATE_OPTIMAL: | |
f3eedd69 KD |
6517 | case MPI2_RAID_PD_STATE_HOT_SPARE: |
6518 | ||
0bdccdb0 KD |
6519 | if (!ioc->is_warpdrive) |
6520 | set_bit(handle, ioc->pd_handles); | |
f3eedd69 KD |
6521 | |
6522 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
6523 | sas_device = _scsih_sas_device_find_by_handle(ioc, handle); | |
6524 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
6525 | ||
6526 | if (sas_device) | |
62727a7b | 6527 | return; |
62727a7b KD |
6528 | |
6529 | if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, | |
6530 | &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, | |
6531 | handle))) { | |
6532 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
6533 | ioc->name, __FILE__, __LINE__, __func__); | |
6534 | return; | |
6535 | } | |
6536 | ||
6537 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
6538 | MPI2_IOCSTATUS_MASK; | |
6539 | if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { | |
6540 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
6541 | ioc->name, __FILE__, __LINE__, __func__); | |
6542 | return; | |
6543 | } | |
6544 | ||
c5e039be KD |
6545 | parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); |
6546 | if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) | |
6547 | mpt2sas_transport_update_links(ioc, sas_address, handle, | |
6548 | sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); | |
62727a7b KD |
6549 | |
6550 | _scsih_add_device(ioc, handle, 0, 1); | |
6551 | ||
635374e7 EM |
6552 | break; |
6553 | ||
62727a7b | 6554 | case MPI2_RAID_PD_STATE_OFFLINE: |
635374e7 EM |
6555 | case MPI2_RAID_PD_STATE_NOT_CONFIGURED: |
6556 | case MPI2_RAID_PD_STATE_NOT_COMPATIBLE: | |
635374e7 EM |
6557 | default: |
6558 | break; | |
6559 | } | |
6560 | } | |
6561 | ||
6562 | #ifdef CONFIG_SCSI_MPT2SAS_LOGGING | |
6563 | /** | |
6564 | * _scsih_sas_ir_operation_status_event_debug - debug for IR op event | |
6565 | * @ioc: per adapter object | |
6566 | * @event_data: event data payload | |
6567 | * Context: user. | |
6568 | * | |
6569 | * Return nothing. | |
6570 | */ | |
6571 | static void | |
6572 | _scsih_sas_ir_operation_status_event_debug(struct MPT2SAS_ADAPTER *ioc, | |
6573 | Mpi2EventDataIrOperationStatus_t *event_data) | |
6574 | { | |
6575 | char *reason_str = NULL; | |
6576 | ||
6577 | switch (event_data->RAIDOperation) { | |
6578 | case MPI2_EVENT_IR_RAIDOP_RESYNC: | |
6579 | reason_str = "resync"; | |
6580 | break; | |
6581 | case MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION: | |
6582 | reason_str = "online capacity expansion"; | |
6583 | break; | |
6584 | case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK: | |
6585 | reason_str = "consistency check"; | |
6586 | break; | |
ec6c2b43 KD |
6587 | case MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT: |
6588 | reason_str = "background init"; | |
6589 | break; | |
6590 | case MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT: | |
6591 | reason_str = "make data consistent"; | |
635374e7 EM |
6592 | break; |
6593 | } | |
6594 | ||
ec6c2b43 KD |
6595 | if (!reason_str) |
6596 | return; | |
6597 | ||
635374e7 EM |
6598 | printk(MPT2SAS_INFO_FMT "raid operational status: (%s)" |
6599 | "\thandle(0x%04x), percent complete(%d)\n", | |
6600 | ioc->name, reason_str, | |
6601 | le16_to_cpu(event_data->VolDevHandle), | |
6602 | event_data->PercentComplete); | |
6603 | } | |
6604 | #endif | |
6605 | ||
6606 | /** | |
6607 | * _scsih_sas_ir_operation_status_event - handle RAID operation events | |
6608 | * @ioc: per adapter object | |
7b936b02 | 6609 | * @fw_event: The fw_event_work object |
635374e7 EM |
6610 | * Context: user. |
6611 | * | |
6612 | * Return nothing. | |
6613 | */ | |
6614 | static void | |
7b936b02 KD |
6615 | _scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc, |
6616 | struct fw_event_work *fw_event) | |
635374e7 | 6617 | { |
f7c95ef0 KD |
6618 | Mpi2EventDataIrOperationStatus_t *event_data = fw_event->event_data; |
6619 | static struct _raid_device *raid_device; | |
6620 | unsigned long flags; | |
6621 | u16 handle; | |
6622 | ||
635374e7 | 6623 | #ifdef CONFIG_SCSI_MPT2SAS_LOGGING |
0bdccdb0 KD |
6624 | if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) |
6625 | && !ioc->hide_ir_msg) | |
7b936b02 | 6626 | _scsih_sas_ir_operation_status_event_debug(ioc, |
f7c95ef0 | 6627 | event_data); |
635374e7 | 6628 | #endif |
f7c95ef0 KD |
6629 | |
6630 | /* code added for raid transport support */ | |
6631 | if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) { | |
6632 | ||
f7c95ef0 | 6633 | spin_lock_irqsave(&ioc->raid_device_lock, flags); |
09da0b32 | 6634 | handle = le16_to_cpu(event_data->VolDevHandle); |
f7c95ef0 | 6635 | raid_device = _scsih_raid_device_find_by_handle(ioc, handle); |
09da0b32 | 6636 | if (raid_device) |
f7c95ef0 KD |
6637 | raid_device->percent_complete = |
6638 | event_data->PercentComplete; | |
09da0b32 | 6639 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); |
f7c95ef0 | 6640 | } |
635374e7 EM |
6641 | } |
6642 | ||
14695853 KD |
6643 | /** |
6644 | * _scsih_prep_device_scan - initialize parameters prior to device scan | |
6645 | * @ioc: per adapter object | |
6646 | * | |
6647 | * Set the deleted flag prior to device scan. If the device is found during | |
6648 | * the scan, then we clear the deleted flag. | |
6649 | */ | |
6650 | static void | |
6651 | _scsih_prep_device_scan(struct MPT2SAS_ADAPTER *ioc) | |
6652 | { | |
6653 | struct MPT2SAS_DEVICE *sas_device_priv_data; | |
6654 | struct scsi_device *sdev; | |
6655 | ||
6656 | shost_for_each_device(sdev, ioc->shost) { | |
6657 | sas_device_priv_data = sdev->hostdata; | |
6658 | if (sas_device_priv_data && sas_device_priv_data->sas_target) | |
6659 | sas_device_priv_data->sas_target->deleted = 1; | |
6660 | } | |
6661 | } | |
6662 | ||
635374e7 EM |
6663 | /** |
6664 | * _scsih_mark_responding_sas_device - mark a sas_devices as responding | |
6665 | * @ioc: per adapter object | |
6666 | * @sas_address: sas address | |
6667 | * @slot: enclosure slot id | |
6668 | * @handle: device handle | |
6669 | * | |
6670 | * After host reset, find out whether devices are still responding. | |
6671 | * Used in _scsi_remove_unresponsive_sas_devices. | |
6672 | * | |
6673 | * Return nothing. | |
6674 | */ | |
6675 | static void | |
6676 | _scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, | |
6677 | u16 slot, u16 handle) | |
6678 | { | |
0bdccdb0 | 6679 | struct MPT2SAS_TARGET *sas_target_priv_data = NULL; |
635374e7 EM |
6680 | struct scsi_target *starget; |
6681 | struct _sas_device *sas_device; | |
6682 | unsigned long flags; | |
6683 | ||
6684 | spin_lock_irqsave(&ioc->sas_device_lock, flags); | |
6685 | list_for_each_entry(sas_device, &ioc->sas_device_list, list) { | |
6686 | if (sas_device->sas_address == sas_address && | |
0bdccdb0 | 6687 | sas_device->slot == slot) { |
635374e7 | 6688 | sas_device->responding = 1; |
77e63ed4 | 6689 | starget = sas_device->starget; |
14695853 KD |
6690 | if (starget && starget->hostdata) { |
6691 | sas_target_priv_data = starget->hostdata; | |
6692 | sas_target_priv_data->tm_busy = 0; | |
6693 | sas_target_priv_data->deleted = 0; | |
6694 | } else | |
6695 | sas_target_priv_data = NULL; | |
0bdccdb0 KD |
6696 | if (starget) |
6697 | starget_printk(KERN_INFO, starget, | |
6698 | "handle(0x%04x), sas_addr(0x%016llx), " | |
6699 | "enclosure logical id(0x%016llx), " | |
6700 | "slot(%d)\n", handle, | |
6701 | (unsigned long long)sas_device->sas_address, | |
6702 | (unsigned long long) | |
6703 | sas_device->enclosure_logical_id, | |
6704 | sas_device->slot); | |
635374e7 EM |
6705 | if (sas_device->handle == handle) |
6706 | goto out; | |
6707 | printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n", | |
6708 | sas_device->handle); | |
6709 | sas_device->handle = handle; | |
14695853 KD |
6710 | if (sas_target_priv_data) |
6711 | sas_target_priv_data->handle = handle; | |
635374e7 EM |
6712 | goto out; |
6713 | } | |
6714 | } | |
6715 | out: | |
6716 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
6717 | } | |
6718 | ||
6719 | /** | |
6720 | * _scsih_search_responding_sas_devices - | |
6721 | * @ioc: per adapter object | |
6722 | * | |
6723 | * After host reset, find out whether devices are still responding. | |
6724 | * If not remove. | |
6725 | * | |
6726 | * Return nothing. | |
6727 | */ | |
6728 | static void | |
6729 | _scsih_search_responding_sas_devices(struct MPT2SAS_ADAPTER *ioc) | |
6730 | { | |
6731 | Mpi2SasDevicePage0_t sas_device_pg0; | |
6732 | Mpi2ConfigReply_t mpi_reply; | |
6733 | u16 ioc_status; | |
6734 | __le64 sas_address; | |
6735 | u16 handle; | |
6736 | u32 device_info; | |
6737 | u16 slot; | |
6738 | ||
921cd802 | 6739 | printk(MPT2SAS_INFO_FMT "search for end-devices: start\n", ioc->name); |
635374e7 EM |
6740 | |
6741 | if (list_empty(&ioc->sas_device_list)) | |
921cd802 | 6742 | goto out; |
635374e7 EM |
6743 | |
6744 | handle = 0xFFFF; | |
6745 | while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, | |
6746 | &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE, | |
6747 | handle))) { | |
6748 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
6749 | MPI2_IOCSTATUS_MASK; | |
6750 | if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) | |
6751 | break; | |
6752 | handle = le16_to_cpu(sas_device_pg0.DevHandle); | |
6753 | device_info = le32_to_cpu(sas_device_pg0.DeviceInfo); | |
6754 | if (!(_scsih_is_end_device(device_info))) | |
6755 | continue; | |
6756 | sas_address = le64_to_cpu(sas_device_pg0.SASAddress); | |
6757 | slot = le16_to_cpu(sas_device_pg0.Slot); | |
6758 | _scsih_mark_responding_sas_device(ioc, sas_address, slot, | |
6759 | handle); | |
6760 | } | |
921cd802 | 6761 | out: |
6762 | printk(MPT2SAS_INFO_FMT "search for end-devices: complete\n", | |
6763 | ioc->name); | |
635374e7 EM |
6764 | } |
6765 | ||
6766 | /** | |
6767 | * _scsih_mark_responding_raid_device - mark a raid_device as responding | |
6768 | * @ioc: per adapter object | |
6769 | * @wwid: world wide identifier for raid volume | |
6770 | * @handle: device handle | |
6771 | * | |
6772 | * After host reset, find out whether devices are still responding. | |
6773 | * Used in _scsi_remove_unresponsive_raid_devices. | |
6774 | * | |
6775 | * Return nothing. | |
6776 | */ | |
6777 | static void | |
6778 | _scsih_mark_responding_raid_device(struct MPT2SAS_ADAPTER *ioc, u64 wwid, | |
6779 | u16 handle) | |
6780 | { | |
6781 | struct MPT2SAS_TARGET *sas_target_priv_data; | |
6782 | struct scsi_target *starget; | |
6783 | struct _raid_device *raid_device; | |
6784 | unsigned long flags; | |
6785 | ||
6786 | spin_lock_irqsave(&ioc->raid_device_lock, flags); | |
6787 | list_for_each_entry(raid_device, &ioc->raid_device_list, list) { | |
6788 | if (raid_device->wwid == wwid && raid_device->starget) { | |
14695853 KD |
6789 | starget = raid_device->starget; |
6790 | if (starget && starget->hostdata) { | |
6791 | sas_target_priv_data = starget->hostdata; | |
6792 | sas_target_priv_data->deleted = 0; | |
6793 | } else | |
6794 | sas_target_priv_data = NULL; | |
635374e7 | 6795 | raid_device->responding = 1; |
30c43282 | 6796 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); |
635374e7 EM |
6797 | starget_printk(KERN_INFO, raid_device->starget, |
6798 | "handle(0x%04x), wwid(0x%016llx)\n", handle, | |
6799 | (unsigned long long)raid_device->wwid); | |
0bdccdb0 KD |
6800 | /* |
6801 | * WARPDRIVE: The handles of the PDs might have changed | |
6802 | * across the host reset so re-initialize the | |
6803 | * required data for Direct IO | |
6804 | */ | |
6805 | _scsih_init_warpdrive_properties(ioc, raid_device); | |
09da0b32 | 6806 | spin_lock_irqsave(&ioc->raid_device_lock, flags); |
6807 | if (raid_device->handle == handle) { | |
6808 | spin_unlock_irqrestore(&ioc->raid_device_lock, | |
6809 | flags); | |
30c43282 | 6810 | return; |
09da0b32 | 6811 | } |
635374e7 EM |
6812 | printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n", |
6813 | raid_device->handle); | |
6814 | raid_device->handle = handle; | |
14695853 KD |
6815 | if (sas_target_priv_data) |
6816 | sas_target_priv_data->handle = handle; | |
09da0b32 | 6817 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); |
30c43282 | 6818 | return; |
635374e7 EM |
6819 | } |
6820 | } | |
30c43282 | 6821 | |
635374e7 EM |
6822 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); |
6823 | } | |
6824 | ||
6825 | /** | |
6826 | * _scsih_search_responding_raid_devices - | |
6827 | * @ioc: per adapter object | |
6828 | * | |
6829 | * After host reset, find out whether devices are still responding. | |
6830 | * If not remove. | |
6831 | * | |
6832 | * Return nothing. | |
6833 | */ | |
6834 | static void | |
6835 | _scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc) | |
6836 | { | |
6837 | Mpi2RaidVolPage1_t volume_pg1; | |
d417d1c3 | 6838 | Mpi2RaidVolPage0_t volume_pg0; |
f3eedd69 | 6839 | Mpi2RaidPhysDiskPage0_t pd_pg0; |
635374e7 EM |
6840 | Mpi2ConfigReply_t mpi_reply; |
6841 | u16 ioc_status; | |
6842 | u16 handle; | |
f3eedd69 | 6843 | u8 phys_disk_num; |
635374e7 | 6844 | |
921cd802 | 6845 | if (!ioc->ir_firmware) |
6846 | return; | |
6847 | ||
6848 | printk(MPT2SAS_INFO_FMT "search for raid volumes: start\n", | |
6849 | ioc->name); | |
635374e7 EM |
6850 | |
6851 | if (list_empty(&ioc->raid_device_list)) | |
921cd802 | 6852 | goto out; |
635374e7 EM |
6853 | |
6854 | handle = 0xFFFF; | |
6855 | while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, | |
6856 | &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { | |
6857 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
6858 | MPI2_IOCSTATUS_MASK; | |
6859 | if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) | |
6860 | break; | |
6861 | handle = le16_to_cpu(volume_pg1.DevHandle); | |
d417d1c3 KD |
6862 | |
6863 | if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, | |
6864 | &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle, | |
6865 | sizeof(Mpi2RaidVolPage0_t))) | |
6866 | continue; | |
6867 | ||
6868 | if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL || | |
6869 | volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE || | |
6870 | volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) | |
6871 | _scsih_mark_responding_raid_device(ioc, | |
6872 | le64_to_cpu(volume_pg1.WWID), handle); | |
635374e7 | 6873 | } |
f3eedd69 KD |
6874 | |
6875 | /* refresh the pd_handles */ | |
0bdccdb0 KD |
6876 | if (!ioc->is_warpdrive) { |
6877 | phys_disk_num = 0xFF; | |
6878 | memset(ioc->pd_handles, 0, ioc->pd_handles_sz); | |
6879 | while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply, | |
6880 | &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM, | |
6881 | phys_disk_num))) { | |
6882 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
6883 | MPI2_IOCSTATUS_MASK; | |
6884 | if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) | |
6885 | break; | |
6886 | phys_disk_num = pd_pg0.PhysDiskNum; | |
6887 | handle = le16_to_cpu(pd_pg0.DevHandle); | |
6888 | set_bit(handle, ioc->pd_handles); | |
6889 | } | |
f3eedd69 | 6890 | } |
921cd802 | 6891 | out: |
6892 | printk(MPT2SAS_INFO_FMT "search for responding raid volumes: " | |
6893 | "complete\n", ioc->name); | |
635374e7 EM |
6894 | } |
6895 | ||
6896 | /** | |
6897 | * _scsih_mark_responding_expander - mark a expander as responding | |
6898 | * @ioc: per adapter object | |
6899 | * @sas_address: sas address | |
6900 | * @handle: | |
6901 | * | |
6902 | * After host reset, find out whether devices are still responding. | |
6903 | * Used in _scsi_remove_unresponsive_expanders. | |
6904 | * | |
6905 | * Return nothing. | |
6906 | */ | |
6907 | static void | |
6908 | _scsih_mark_responding_expander(struct MPT2SAS_ADAPTER *ioc, u64 sas_address, | |
6909 | u16 handle) | |
6910 | { | |
6911 | struct _sas_node *sas_expander; | |
6912 | unsigned long flags; | |
c5e039be | 6913 | int i; |
635374e7 EM |
6914 | |
6915 | spin_lock_irqsave(&ioc->sas_node_lock, flags); | |
6916 | list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) { | |
c5e039be KD |
6917 | if (sas_expander->sas_address != sas_address) |
6918 | continue; | |
6919 | sas_expander->responding = 1; | |
6920 | if (sas_expander->handle == handle) | |
635374e7 | 6921 | goto out; |
c5e039be KD |
6922 | printk(KERN_INFO "\texpander(0x%016llx): handle changed" |
6923 | " from(0x%04x) to (0x%04x)!!!\n", | |
6924 | (unsigned long long)sas_expander->sas_address, | |
6925 | sas_expander->handle, handle); | |
6926 | sas_expander->handle = handle; | |
6927 | for (i = 0 ; i < sas_expander->num_phys ; i++) | |
6928 | sas_expander->phy[i].handle = handle; | |
6929 | goto out; | |
635374e7 EM |
6930 | } |
6931 | out: | |
6932 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
6933 | } | |
6934 | ||
6935 | /** | |
6936 | * _scsih_search_responding_expanders - | |
6937 | * @ioc: per adapter object | |
6938 | * | |
6939 | * After host reset, find out whether devices are still responding. | |
6940 | * If not remove. | |
6941 | * | |
6942 | * Return nothing. | |
6943 | */ | |
6944 | static void | |
6945 | _scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc) | |
6946 | { | |
6947 | Mpi2ExpanderPage0_t expander_pg0; | |
6948 | Mpi2ConfigReply_t mpi_reply; | |
6949 | u16 ioc_status; | |
c97951ec | 6950 | u64 sas_address; |
635374e7 EM |
6951 | u16 handle; |
6952 | ||
921cd802 | 6953 | printk(MPT2SAS_INFO_FMT "search for expanders: start\n", ioc->name); |
635374e7 EM |
6954 | |
6955 | if (list_empty(&ioc->sas_expander_list)) | |
921cd802 | 6956 | goto out; |
635374e7 EM |
6957 | |
6958 | handle = 0xFFFF; | |
6959 | while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, | |
6960 | MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) { | |
6961 | ||
6962 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
6963 | MPI2_IOCSTATUS_MASK; | |
6964 | if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) | |
6965 | break; | |
6966 | ||
6967 | handle = le16_to_cpu(expander_pg0.DevHandle); | |
6968 | sas_address = le64_to_cpu(expander_pg0.SASAddress); | |
6969 | printk(KERN_INFO "\texpander present: handle(0x%04x), " | |
6970 | "sas_addr(0x%016llx)\n", handle, | |
6971 | (unsigned long long)sas_address); | |
6972 | _scsih_mark_responding_expander(ioc, sas_address, handle); | |
6973 | } | |
6974 | ||
921cd802 | 6975 | out: |
6976 | printk(MPT2SAS_INFO_FMT "search for expanders: complete\n", ioc->name); | |
635374e7 EM |
6977 | } |
6978 | ||
6979 | /** | |
f1c35e6a | 6980 | * _scsih_remove_unresponding_sas_devices - removing unresponding devices |
635374e7 EM |
6981 | * @ioc: per adapter object |
6982 | * | |
6983 | * Return nothing. | |
6984 | */ | |
6985 | static void | |
f1c35e6a | 6986 | _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc) |
635374e7 EM |
6987 | { |
6988 | struct _sas_device *sas_device, *sas_device_next; | |
09da0b32 | 6989 | struct _sas_node *sas_expander, *sas_expander_next; |
635374e7 | 6990 | struct _raid_device *raid_device, *raid_device_next; |
09da0b32 | 6991 | struct list_head tmp_list; |
6992 | unsigned long flags; | |
635374e7 | 6993 | |
921cd802 | 6994 | printk(MPT2SAS_INFO_FMT "removing unresponding devices: start\n", |
6995 | ioc->name); | |
635374e7 | 6996 | |
09da0b32 | 6997 | /* removing unresponding end devices */ |
6998 | printk(MPT2SAS_INFO_FMT "removing unresponding devices: end-devices\n", | |
6999 | ioc->name); | |
635374e7 EM |
7000 | list_for_each_entry_safe(sas_device, sas_device_next, |
7001 | &ioc->sas_device_list, list) { | |
09da0b32 | 7002 | if (!sas_device->responding) |
39af7a98 | 7003 | mpt2sas_device_remove_by_sas_address(ioc, |
7004 | sas_device->sas_address); | |
09da0b32 | 7005 | else |
635374e7 | 7006 | sas_device->responding = 0; |
635374e7 EM |
7007 | } |
7008 | ||
09da0b32 | 7009 | /* removing unresponding volumes */ |
7010 | if (ioc->ir_firmware) { | |
7011 | printk(MPT2SAS_INFO_FMT "removing unresponding devices: " | |
7012 | "volumes\n", ioc->name); | |
7013 | list_for_each_entry_safe(raid_device, raid_device_next, | |
7014 | &ioc->raid_device_list, list) { | |
7015 | if (!raid_device->responding) | |
7016 | _scsih_sas_volume_delete(ioc, | |
7017 | raid_device->handle); | |
7018 | else | |
7019 | raid_device->responding = 0; | |
635374e7 | 7020 | } |
635374e7 | 7021 | } |
09da0b32 | 7022 | /* removing unresponding expanders */ |
7023 | printk(MPT2SAS_INFO_FMT "removing unresponding devices: expanders\n", | |
7024 | ioc->name); | |
7025 | spin_lock_irqsave(&ioc->sas_node_lock, flags); | |
7026 | INIT_LIST_HEAD(&tmp_list); | |
7027 | list_for_each_entry_safe(sas_expander, sas_expander_next, | |
7028 | &ioc->sas_expander_list, list) { | |
7029 | if (!sas_expander->responding) | |
7030 | list_move_tail(&sas_expander->list, &tmp_list); | |
7031 | else | |
635374e7 | 7032 | sas_expander->responding = 0; |
09da0b32 | 7033 | } |
7034 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); | |
7035 | list_for_each_entry_safe(sas_expander, sas_expander_next, &tmp_list, | |
7036 | list) { | |
7037 | list_del(&sas_expander->list); | |
7038 | _scsih_expander_node_remove(ioc, sas_expander); | |
cd4e12e8 | 7039 | } |
921cd802 | 7040 | printk(MPT2SAS_INFO_FMT "removing unresponding devices: complete\n", |
7041 | ioc->name); | |
7042 | /* unblock devices */ | |
7043 | _scsih_ublock_io_all_device(ioc); | |
7044 | } | |
7045 | ||
7046 | static void | |
7047 | _scsih_refresh_expander_links(struct MPT2SAS_ADAPTER *ioc, | |
7048 | struct _sas_node *sas_expander, u16 handle) | |
7049 | { | |
7050 | Mpi2ExpanderPage1_t expander_pg1; | |
7051 | Mpi2ConfigReply_t mpi_reply; | |
7052 | int i; | |
7053 | ||
7054 | for (i = 0 ; i < sas_expander->num_phys ; i++) { | |
7055 | if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply, | |
7056 | &expander_pg1, i, handle))) { | |
7057 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
7058 | ioc->name, __FILE__, __LINE__, __func__); | |
7059 | return; | |
7060 | } | |
7061 | ||
7062 | mpt2sas_transport_update_links(ioc, sas_expander->sas_address, | |
7063 | le16_to_cpu(expander_pg1.AttachedDevHandle), i, | |
7064 | expander_pg1.NegotiatedLinkRate >> 4); | |
7065 | } | |
cd4e12e8 KD |
7066 | } |
7067 | ||
0bdccdb0 | 7068 | /** |
921cd802 | 7069 | * _scsih_scan_for_devices_after_reset - scan for devices after host reset |
0bdccdb0 KD |
7070 | * @ioc: per adapter object |
7071 | * | |
7072 | * Return nothing. | |
7073 | */ | |
7074 | static void | |
921cd802 | 7075 | _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc) |
0bdccdb0 | 7076 | { |
921cd802 | 7077 | Mpi2ExpanderPage0_t expander_pg0; |
7078 | Mpi2SasDevicePage0_t sas_device_pg0; | |
7079 | Mpi2RaidVolPage1_t volume_pg1; | |
7080 | Mpi2RaidVolPage0_t volume_pg0; | |
7081 | Mpi2RaidPhysDiskPage0_t pd_pg0; | |
7082 | Mpi2EventIrConfigElement_t element; | |
7083 | Mpi2ConfigReply_t mpi_reply; | |
7084 | u8 phys_disk_num; | |
7085 | u16 ioc_status; | |
7086 | u16 handle, parent_handle; | |
7087 | u64 sas_address; | |
7088 | struct _sas_device *sas_device; | |
7089 | struct _sas_node *expander_device; | |
7090 | static struct _raid_device *raid_device; | |
09da0b32 | 7091 | unsigned long flags; |
0bdccdb0 | 7092 | |
921cd802 | 7093 | printk(MPT2SAS_INFO_FMT "scan devices: start\n", ioc->name); |
0bdccdb0 | 7094 | |
921cd802 | 7095 | _scsih_sas_host_refresh(ioc); |
7096 | ||
7097 | /* expanders */ | |
7098 | handle = 0xFFFF; | |
7099 | while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, | |
7100 | MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) { | |
7101 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
7102 | MPI2_IOCSTATUS_MASK; | |
7103 | if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) | |
7104 | break; | |
7105 | handle = le16_to_cpu(expander_pg0.DevHandle); | |
09da0b32 | 7106 | spin_lock_irqsave(&ioc->sas_node_lock, flags); |
921cd802 | 7107 | expander_device = mpt2sas_scsih_expander_find_by_sas_address( |
7108 | ioc, le64_to_cpu(expander_pg0.SASAddress)); | |
09da0b32 | 7109 | spin_unlock_irqrestore(&ioc->sas_node_lock, flags); |
921cd802 | 7110 | if (expander_device) |
7111 | _scsih_refresh_expander_links(ioc, expander_device, | |
7112 | handle); | |
7113 | else | |
7114 | _scsih_expander_add(ioc, handle); | |
7115 | } | |
7116 | ||
7117 | if (!ioc->ir_firmware) | |
7118 | goto skip_to_sas; | |
7119 | ||
7120 | /* phys disk */ | |
7121 | phys_disk_num = 0xFF; | |
7122 | while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply, | |
7123 | &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM, | |
7124 | phys_disk_num))) { | |
7125 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
7126 | MPI2_IOCSTATUS_MASK; | |
7127 | if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) | |
7128 | break; | |
7129 | phys_disk_num = pd_pg0.PhysDiskNum; | |
7130 | handle = le16_to_cpu(pd_pg0.DevHandle); | |
09da0b32 | 7131 | spin_lock_irqsave(&ioc->sas_device_lock, flags); |
921cd802 | 7132 | sas_device = _scsih_sas_device_find_by_handle(ioc, handle); |
09da0b32 | 7133 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); |
921cd802 | 7134 | if (sas_device) |
7135 | continue; | |
7136 | if (mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, | |
7137 | &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, | |
7138 | handle) != 0) | |
7139 | continue; | |
7140 | parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); | |
7141 | if (!_scsih_get_sas_address(ioc, parent_handle, | |
7142 | &sas_address)) { | |
7143 | mpt2sas_transport_update_links(ioc, sas_address, | |
7144 | handle, sas_device_pg0.PhyNum, | |
7145 | MPI2_SAS_NEG_LINK_RATE_1_5); | |
7146 | set_bit(handle, ioc->pd_handles); | |
7147 | _scsih_add_device(ioc, handle, 0, 1); | |
0bdccdb0 | 7148 | } |
921cd802 | 7149 | } |
7150 | ||
7151 | /* volumes */ | |
7152 | handle = 0xFFFF; | |
7153 | while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, | |
7154 | &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { | |
7155 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
7156 | MPI2_IOCSTATUS_MASK; | |
7157 | if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) | |
7158 | break; | |
7159 | handle = le16_to_cpu(volume_pg1.DevHandle); | |
09da0b32 | 7160 | spin_lock_irqsave(&ioc->raid_device_lock, flags); |
921cd802 | 7161 | raid_device = _scsih_raid_device_find_by_wwid(ioc, |
7162 | le64_to_cpu(volume_pg1.WWID)); | |
09da0b32 | 7163 | spin_unlock_irqrestore(&ioc->raid_device_lock, flags); |
921cd802 | 7164 | if (raid_device) |
7165 | continue; | |
7166 | if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, | |
7167 | &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle, | |
7168 | sizeof(Mpi2RaidVolPage0_t))) | |
7169 | continue; | |
7170 | if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL || | |
7171 | volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE || | |
7172 | volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) { | |
7173 | memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t)); | |
7174 | element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED; | |
7175 | element.VolDevHandle = volume_pg1.DevHandle; | |
7176 | _scsih_sas_volume_add(ioc, &element); | |
7177 | } | |
7178 | } | |
7179 | ||
7180 | skip_to_sas: | |
7181 | ||
7182 | /* sas devices */ | |
7183 | handle = 0xFFFF; | |
7184 | while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, | |
7185 | &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE, | |
7186 | handle))) { | |
7187 | ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & | |
7188 | MPI2_IOCSTATUS_MASK; | |
7189 | if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) | |
7190 | break; | |
7191 | handle = le16_to_cpu(sas_device_pg0.DevHandle); | |
7192 | if (!(_scsih_is_end_device( | |
7193 | le32_to_cpu(sas_device_pg0.DeviceInfo)))) | |
7194 | continue; | |
09da0b32 | 7195 | spin_lock_irqsave(&ioc->sas_device_lock, flags); |
921cd802 | 7196 | sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, |
7197 | le64_to_cpu(sas_device_pg0.SASAddress)); | |
09da0b32 | 7198 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); |
921cd802 | 7199 | if (sas_device) |
7200 | continue; | |
7201 | parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); | |
7202 | if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) { | |
7203 | mpt2sas_transport_update_links(ioc, sas_address, handle, | |
7204 | sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); | |
7205 | _scsih_add_device(ioc, handle, 0, 0); | |
0bdccdb0 KD |
7206 | } |
7207 | } | |
921cd802 | 7208 | |
7209 | printk(MPT2SAS_INFO_FMT "scan devices: complete\n", ioc->name); | |
0bdccdb0 KD |
7210 | } |
7211 | ||
921cd802 | 7212 | |
cd4e12e8 KD |
7213 | /** |
7214 | * mpt2sas_scsih_reset_handler - reset callback handler (for scsih) | |
7215 | * @ioc: per adapter object | |
7216 | * @reset_phase: phase | |
7217 | * | |
7218 | * The handler for doing any required cleanup or initialization. | |
7219 | * | |
7220 | * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET, | |
7221 | * MPT2_IOC_DONE_RESET | |
7222 | * | |
7223 | * Return nothing. | |
7224 | */ | |
7225 | void | |
7226 | mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) | |
7227 | { | |
7228 | switch (reset_phase) { | |
7229 | case MPT2_IOC_PRE_RESET: | |
eabb08ad | 7230 | dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " |
cd4e12e8 | 7231 | "MPT2_IOC_PRE_RESET\n", ioc->name, __func__)); |
cd4e12e8 KD |
7232 | break; |
7233 | case MPT2_IOC_AFTER_RESET: | |
eabb08ad | 7234 | dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " |
cd4e12e8 | 7235 | "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__)); |
f1c35e6a KD |
7236 | if (ioc->scsih_cmds.status & MPT2_CMD_PENDING) { |
7237 | ioc->scsih_cmds.status |= MPT2_CMD_RESET; | |
7238 | mpt2sas_base_free_smid(ioc, ioc->scsih_cmds.smid); | |
7239 | complete(&ioc->scsih_cmds.done); | |
7240 | } | |
cd4e12e8 KD |
7241 | if (ioc->tm_cmds.status & MPT2_CMD_PENDING) { |
7242 | ioc->tm_cmds.status |= MPT2_CMD_RESET; | |
7243 | mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid); | |
7244 | complete(&ioc->tm_cmds.done); | |
7245 | } | |
f1c35e6a | 7246 | _scsih_fw_event_cleanup_queue(ioc); |
cd4e12e8 KD |
7247 | _scsih_flush_running_cmds(ioc); |
7248 | break; | |
7249 | case MPT2_IOC_DONE_RESET: | |
eabb08ad | 7250 | dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " |
cd4e12e8 | 7251 | "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); |
c5e039be | 7252 | _scsih_sas_host_refresh(ioc); |
14695853 KD |
7253 | _scsih_prep_device_scan(ioc); |
7254 | _scsih_search_responding_sas_devices(ioc); | |
7255 | _scsih_search_responding_raid_devices(ioc); | |
7256 | _scsih_search_responding_expanders(ioc); | |
918134ef | 7257 | if (!ioc->is_driver_loading) { |
7258 | _scsih_prep_device_scan(ioc); | |
7259 | _scsih_search_responding_sas_devices(ioc); | |
7260 | _scsih_search_responding_raid_devices(ioc); | |
7261 | _scsih_search_responding_expanders(ioc); | |
921cd802 | 7262 | _scsih_error_recovery_delete_devices(ioc); |
918134ef | 7263 | } |
cd4e12e8 | 7264 | break; |
635374e7 EM |
7265 | } |
7266 | } | |
7267 | ||
7268 | /** | |
7269 | * _firmware_event_work - delayed task for processing firmware events | |
7270 | * @ioc: per adapter object | |
7271 | * @work: equal to the fw_event_work object | |
7272 | * Context: user. | |
7273 | * | |
7274 | * Return nothing. | |
7275 | */ | |
7276 | static void | |
7277 | _firmware_event_work(struct work_struct *work) | |
7278 | { | |
7279 | struct fw_event_work *fw_event = container_of(work, | |
f1c35e6a | 7280 | struct fw_event_work, delayed_work.work); |
635374e7 EM |
7281 | struct MPT2SAS_ADAPTER *ioc = fw_event->ioc; |
7282 | ||
635374e7 | 7283 | /* the queue is being flushed so ignore this event */ |
3cb5469a EM |
7284 | if (ioc->remove_host || fw_event->cancel_pending_work || |
7285 | ioc->pci_error_recovery) { | |
635374e7 EM |
7286 | _scsih_fw_event_free(ioc, fw_event); |
7287 | return; | |
7288 | } | |
635374e7 | 7289 | |
921cd802 | 7290 | switch (fw_event->event) { |
7291 | case MPT2SAS_REMOVE_UNRESPONDING_DEVICES: | |
09da0b32 | 7292 | while (scsi_host_in_recovery(ioc->shost) || ioc->shost_recovery) |
921cd802 | 7293 | ssleep(1); |
f1c35e6a | 7294 | _scsih_remove_unresponding_sas_devices(ioc); |
921cd802 | 7295 | _scsih_scan_for_devices_after_reset(ioc); |
7296 | break; | |
7297 | case MPT2SAS_PORT_ENABLE_COMPLETE: | |
918134ef | 7298 | ioc->start_scan = 0; |
921cd802 | 7299 | |
7300 | ||
7301 | ||
7302 | dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "port enable: complete " | |
7303 | "from worker thread\n", ioc->name)); | |
7304 | break; | |
3ace8e05 KD |
7305 | case MPT2SAS_TURN_ON_FAULT_LED: |
7306 | _scsih_turn_on_fault_led(ioc, fw_event->device_handle); | |
7307 | break; | |
635374e7 | 7308 | case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: |
7b936b02 | 7309 | _scsih_sas_topology_change_event(ioc, fw_event); |
635374e7 EM |
7310 | break; |
7311 | case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: | |
7b936b02 KD |
7312 | _scsih_sas_device_status_change_event(ioc, |
7313 | fw_event); | |
635374e7 EM |
7314 | break; |
7315 | case MPI2_EVENT_SAS_DISCOVERY: | |
7b936b02 KD |
7316 | _scsih_sas_discovery_event(ioc, |
7317 | fw_event); | |
635374e7 EM |
7318 | break; |
7319 | case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: | |
a78e21dc | 7320 | _scsih_sas_broadcast_primitive_event(ioc, |
7b936b02 | 7321 | fw_event); |
635374e7 EM |
7322 | break; |
7323 | case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: | |
7324 | _scsih_sas_enclosure_dev_status_change_event(ioc, | |
7b936b02 | 7325 | fw_event); |
635374e7 EM |
7326 | break; |
7327 | case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: | |
7b936b02 | 7328 | _scsih_sas_ir_config_change_event(ioc, fw_event); |
635374e7 EM |
7329 | break; |
7330 | case MPI2_EVENT_IR_VOLUME: | |
7b936b02 | 7331 | _scsih_sas_ir_volume_event(ioc, fw_event); |
635374e7 EM |
7332 | break; |
7333 | case MPI2_EVENT_IR_PHYSICAL_DISK: | |
7b936b02 | 7334 | _scsih_sas_ir_physical_disk_event(ioc, fw_event); |
635374e7 EM |
7335 | break; |
7336 | case MPI2_EVENT_IR_OPERATION_STATUS: | |
7b936b02 | 7337 | _scsih_sas_ir_operation_status_event(ioc, fw_event); |
635374e7 | 7338 | break; |
635374e7 EM |
7339 | } |
7340 | _scsih_fw_event_free(ioc, fw_event); | |
7341 | } | |
7342 | ||
7343 | /** | |
7344 | * mpt2sas_scsih_event_callback - firmware event handler (called at ISR time) | |
7345 | * @ioc: per adapter object | |
7b936b02 | 7346 | * @msix_index: MSIX table index supplied by the OS |
635374e7 EM |
7347 | * @reply: reply message frame(lower 32bit addr) |
7348 | * Context: interrupt. | |
7349 | * | |
7350 | * This function merely adds a new work task into ioc->firmware_event_thread. | |
7351 | * The tasks are worked from _firmware_event_work in user context. | |
7352 | * | |
77e63ed4 KD |
7353 | * Return 1 meaning mf should be freed from _base_interrupt |
7354 | * 0 means the mf is freed from this function. | |
635374e7 | 7355 | */ |
77e63ed4 | 7356 | u8 |
7b936b02 KD |
7357 | mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, |
7358 | u32 reply) | |
635374e7 EM |
7359 | { |
7360 | struct fw_event_work *fw_event; | |
7361 | Mpi2EventNotificationReply_t *mpi_reply; | |
635374e7 | 7362 | u16 event; |
e94f6747 | 7363 | u16 sz; |
635374e7 EM |
7364 | |
7365 | /* events turned off due to host reset or driver unloading */ | |
3cb5469a | 7366 | if (ioc->remove_host || ioc->pci_error_recovery) |
77e63ed4 | 7367 | return 1; |
635374e7 | 7368 | |
77e63ed4 | 7369 | mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); |
298c794d | 7370 | |
7371 | if (unlikely(!mpi_reply)) { | |
7372 | printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n", | |
7373 | ioc->name, __FILE__, __LINE__, __func__); | |
7374 | return 1; | |
7375 | } | |
7376 | ||
635374e7 EM |
7377 | event = le16_to_cpu(mpi_reply->Event); |
7378 | ||
7379 | switch (event) { | |
7380 | /* handle these */ | |
7381 | case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: | |
7382 | { | |
7383 | Mpi2EventDataSasBroadcastPrimitive_t *baen_data = | |
7384 | (Mpi2EventDataSasBroadcastPrimitive_t *) | |
7385 | mpi_reply->EventData; | |
7386 | ||
7387 | if (baen_data->Primitive != | |
f93213de | 7388 | MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT) |
77e63ed4 | 7389 | return 1; |
f93213de KD |
7390 | |
7391 | if (ioc->broadcast_aen_busy) { | |
7392 | ioc->broadcast_aen_pending++; | |
7393 | return 1; | |
7394 | } else | |
7395 | ioc->broadcast_aen_busy = 1; | |
635374e7 EM |
7396 | break; |
7397 | } | |
7398 | ||
7399 | case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: | |
7400 | _scsih_check_topo_delete_events(ioc, | |
7401 | (Mpi2EventDataSasTopologyChangeList_t *) | |
7402 | mpi_reply->EventData); | |
7403 | break; | |
f3eedd69 KD |
7404 | case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: |
7405 | _scsih_check_ir_config_unhide_events(ioc, | |
7406 | (Mpi2EventDataIrConfigChangeList_t *) | |
7407 | mpi_reply->EventData); | |
7408 | break; | |
7409 | case MPI2_EVENT_IR_VOLUME: | |
7410 | _scsih_check_volume_delete_events(ioc, | |
7411 | (Mpi2EventDataIrVolume_t *) | |
7412 | mpi_reply->EventData); | |
7413 | break; | |
0bdccdb0 KD |
7414 | case MPI2_EVENT_LOG_ENTRY_ADDED: |
7415 | { | |
7416 | Mpi2EventDataLogEntryAdded_t *log_entry; | |
d838c36c | 7417 | __le32 *log_code; |
0bdccdb0 KD |
7418 | |
7419 | if (!ioc->is_warpdrive) | |
7420 | break; | |
7421 | ||
7422 | log_entry = (Mpi2EventDataLogEntryAdded_t *) | |
7423 | mpi_reply->EventData; | |
d838c36c | 7424 | log_code = (__le32 *)log_entry->LogData; |
0bdccdb0 KD |
7425 | |
7426 | if (le16_to_cpu(log_entry->LogEntryQualifier) | |
7427 | != MPT2_WARPDRIVE_LOGENTRY) | |
7428 | break; | |
7429 | ||
7430 | switch (le32_to_cpu(*log_code)) { | |
7431 | case MPT2_WARPDRIVE_LC_SSDT: | |
7432 | printk(MPT2SAS_WARN_FMT "WarpDrive Warning: " | |
7433 | "IO Throttling has occurred in the WarpDrive " | |
7434 | "subsystem. Check WarpDrive documentation for " | |
7435 | "additional details.\n", ioc->name); | |
7436 | break; | |
7437 | case MPT2_WARPDRIVE_LC_SSDLW: | |
7438 | printk(MPT2SAS_WARN_FMT "WarpDrive Warning: " | |
7439 | "Program/Erase Cycles for the WarpDrive subsystem " | |
7440 | "in degraded range. Check WarpDrive documentation " | |
7441 | "for additional details.\n", ioc->name); | |
7442 | break; | |
7443 | case MPT2_WARPDRIVE_LC_SSDLF: | |
7444 | printk(MPT2SAS_ERR_FMT "WarpDrive Fatal Error: " | |
7445 | "There are no Program/Erase Cycles for the " | |
7446 | "WarpDrive subsystem. The storage device will be " | |
7447 | "in read-only mode. Check WarpDrive documentation " | |
7448 | "for additional details.\n", ioc->name); | |
7449 | break; | |
7450 | case MPT2_WARPDRIVE_LC_BRMF: | |
7451 | printk(MPT2SAS_ERR_FMT "WarpDrive Fatal Error: " | |
7452 | "The Backup Rail Monitor has failed on the " | |
7453 | "WarpDrive subsystem. Check WarpDrive " | |
7454 | "documentation for additional details.\n", | |
7455 | ioc->name); | |
7456 | break; | |
7457 | } | |
7458 | ||
7459 | break; | |
7460 | } | |
635374e7 EM |
7461 | case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: |
7462 | case MPI2_EVENT_IR_OPERATION_STATUS: | |
7463 | case MPI2_EVENT_SAS_DISCOVERY: | |
7464 | case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: | |
635374e7 | 7465 | case MPI2_EVENT_IR_PHYSICAL_DISK: |
635374e7 EM |
7466 | break; |
7467 | ||
7468 | default: /* ignore the rest */ | |
77e63ed4 | 7469 | return 1; |
635374e7 EM |
7470 | } |
7471 | ||
7472 | fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); | |
7473 | if (!fw_event) { | |
7474 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
7475 | ioc->name, __FILE__, __LINE__, __func__); | |
77e63ed4 | 7476 | return 1; |
635374e7 | 7477 | } |
e94f6747 KD |
7478 | sz = le16_to_cpu(mpi_reply->EventDataLength) * 4; |
7479 | fw_event->event_data = kzalloc(sz, GFP_ATOMIC); | |
635374e7 EM |
7480 | if (!fw_event->event_data) { |
7481 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
7482 | ioc->name, __FILE__, __LINE__, __func__); | |
7483 | kfree(fw_event); | |
77e63ed4 | 7484 | return 1; |
635374e7 EM |
7485 | } |
7486 | ||
7487 | memcpy(fw_event->event_data, mpi_reply->EventData, | |
e94f6747 | 7488 | sz); |
635374e7 | 7489 | fw_event->ioc = ioc; |
7b936b02 KD |
7490 | fw_event->VF_ID = mpi_reply->VF_ID; |
7491 | fw_event->VP_ID = mpi_reply->VP_ID; | |
635374e7 EM |
7492 | fw_event->event = event; |
7493 | _scsih_fw_event_add(ioc, fw_event); | |
77e63ed4 | 7494 | return 1; |
635374e7 EM |
7495 | } |
7496 | ||
7497 | /* shost template */ | |
7498 | static struct scsi_host_template scsih_driver_template = { | |
7499 | .module = THIS_MODULE, | |
7500 | .name = "Fusion MPT SAS Host", | |
7501 | .proc_name = MPT2SAS_DRIVER_NAME, | |
d5d135b3 EM |
7502 | .queuecommand = _scsih_qcmd, |
7503 | .target_alloc = _scsih_target_alloc, | |
7504 | .slave_alloc = _scsih_slave_alloc, | |
7505 | .slave_configure = _scsih_slave_configure, | |
7506 | .target_destroy = _scsih_target_destroy, | |
7507 | .slave_destroy = _scsih_slave_destroy, | |
921cd802 | 7508 | .scan_finished = _scsih_scan_finished, |
7509 | .scan_start = _scsih_scan_start, | |
d5d135b3 EM |
7510 | .change_queue_depth = _scsih_change_queue_depth, |
7511 | .change_queue_type = _scsih_change_queue_type, | |
7512 | .eh_abort_handler = _scsih_abort, | |
7513 | .eh_device_reset_handler = _scsih_dev_reset, | |
7514 | .eh_target_reset_handler = _scsih_target_reset, | |
7515 | .eh_host_reset_handler = _scsih_host_reset, | |
7516 | .bios_param = _scsih_bios_param, | |
635374e7 EM |
7517 | .can_queue = 1, |
7518 | .this_id = -1, | |
7519 | .sg_tablesize = MPT2SAS_SG_DEPTH, | |
9ac49d3a | 7520 | .max_sectors = 32767, |
635374e7 EM |
7521 | .cmd_per_lun = 7, |
7522 | .use_clustering = ENABLE_CLUSTERING, | |
7523 | .shost_attrs = mpt2sas_host_attrs, | |
7524 | .sdev_attrs = mpt2sas_dev_attrs, | |
7525 | }; | |
7526 | ||
7527 | /** | |
7528 | * _scsih_expander_node_remove - removing expander device from list. | |
7529 | * @ioc: per adapter object | |
7530 | * @sas_expander: the sas_device object | |
7531 | * Context: Calling function should acquire ioc->sas_node_lock. | |
7532 | * | |
7533 | * Removing object and freeing associated memory from the | |
7534 | * ioc->sas_expander_list. | |
7535 | * | |
7536 | * Return nothing. | |
7537 | */ | |
7538 | static void | |
7539 | _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc, | |
7540 | struct _sas_node *sas_expander) | |
7541 | { | |
7f6f794d | 7542 | struct _sas_port *mpt2sas_port, *next; |
635374e7 EM |
7543 | |
7544 | /* remove sibling ports attached to this expander */ | |
7f6f794d | 7545 | list_for_each_entry_safe(mpt2sas_port, next, |
635374e7 | 7546 | &sas_expander->sas_port_list, port_list) { |
7f6f794d KD |
7547 | if (ioc->shost_recovery) |
7548 | return; | |
635374e7 | 7549 | if (mpt2sas_port->remote_identify.device_type == |
7f6f794d | 7550 | SAS_END_DEVICE) |
09da0b32 | 7551 | mpt2sas_device_remove_by_sas_address(ioc, |
7f6f794d KD |
7552 | mpt2sas_port->remote_identify.sas_address); |
7553 | else if (mpt2sas_port->remote_identify.device_type == | |
7554 | SAS_EDGE_EXPANDER_DEVICE || | |
635374e7 | 7555 | mpt2sas_port->remote_identify.device_type == |
7f6f794d KD |
7556 | SAS_FANOUT_EXPANDER_DEVICE) |
7557 | mpt2sas_expander_remove(ioc, | |
7558 | mpt2sas_port->remote_identify.sas_address); | |
635374e7 EM |
7559 | } |
7560 | ||
7561 | mpt2sas_transport_port_remove(ioc, sas_expander->sas_address, | |
c5e039be | 7562 | sas_expander->sas_address_parent); |
635374e7 EM |
7563 | |
7564 | printk(MPT2SAS_INFO_FMT "expander_remove: handle" | |
7565 | "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, | |
7566 | sas_expander->handle, (unsigned long long) | |
7567 | sas_expander->sas_address); | |
7568 | ||
635374e7 EM |
7569 | kfree(sas_expander->phy); |
7570 | kfree(sas_expander); | |
7571 | } | |
7572 | ||
744090d3 KD |
7573 | /** |
7574 | * _scsih_ir_shutdown - IR shutdown notification | |
7575 | * @ioc: per adapter object | |
7576 | * | |
7577 | * Sending RAID Action to alert the Integrated RAID subsystem of the IOC that | |
7578 | * the host system is shutting down. | |
7579 | * | |
7580 | * Return nothing. | |
7581 | */ | |
7582 | static void | |
7583 | _scsih_ir_shutdown(struct MPT2SAS_ADAPTER *ioc) | |
7584 | { | |
7585 | Mpi2RaidActionRequest_t *mpi_request; | |
7586 | Mpi2RaidActionReply_t *mpi_reply; | |
7587 | u16 smid; | |
7588 | ||
7589 | /* is IR firmware build loaded ? */ | |
7590 | if (!ioc->ir_firmware) | |
7591 | return; | |
7592 | ||
7593 | /* are there any volumes ? */ | |
7594 | if (list_empty(&ioc->raid_device_list)) | |
7595 | return; | |
7596 | ||
7597 | mutex_lock(&ioc->scsih_cmds.mutex); | |
7598 | ||
7599 | if (ioc->scsih_cmds.status != MPT2_CMD_NOT_USED) { | |
7600 | printk(MPT2SAS_ERR_FMT "%s: scsih_cmd in use\n", | |
7601 | ioc->name, __func__); | |
7602 | goto out; | |
7603 | } | |
7604 | ioc->scsih_cmds.status = MPT2_CMD_PENDING; | |
7605 | ||
7606 | smid = mpt2sas_base_get_smid(ioc, ioc->scsih_cb_idx); | |
7607 | if (!smid) { | |
7608 | printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", | |
7609 | ioc->name, __func__); | |
7610 | ioc->scsih_cmds.status = MPT2_CMD_NOT_USED; | |
7611 | goto out; | |
7612 | } | |
7613 | ||
7614 | mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); | |
7615 | ioc->scsih_cmds.smid = smid; | |
7616 | memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t)); | |
7617 | ||
7618 | mpi_request->Function = MPI2_FUNCTION_RAID_ACTION; | |
7619 | mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED; | |
7620 | ||
0bdccdb0 KD |
7621 | if (!ioc->hide_ir_msg) |
7622 | printk(MPT2SAS_INFO_FMT "IR shutdown (sending)\n", ioc->name); | |
744090d3 KD |
7623 | init_completion(&ioc->scsih_cmds.done); |
7624 | mpt2sas_base_put_smid_default(ioc, smid); | |
7625 | wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ); | |
7626 | ||
7627 | if (!(ioc->scsih_cmds.status & MPT2_CMD_COMPLETE)) { | |
7628 | printk(MPT2SAS_ERR_FMT "%s: timeout\n", | |
7629 | ioc->name, __func__); | |
7630 | goto out; | |
7631 | } | |
7632 | ||
7633 | if (ioc->scsih_cmds.status & MPT2_CMD_REPLY_VALID) { | |
7634 | mpi_reply = ioc->scsih_cmds.reply; | |
7635 | ||
0bdccdb0 KD |
7636 | if (!ioc->hide_ir_msg) |
7637 | printk(MPT2SAS_INFO_FMT "IR shutdown (complete): " | |
7638 | "ioc_status(0x%04x), loginfo(0x%08x)\n", | |
7639 | ioc->name, le16_to_cpu(mpi_reply->IOCStatus), | |
7640 | le32_to_cpu(mpi_reply->IOCLogInfo)); | |
744090d3 KD |
7641 | } |
7642 | ||
7643 | out: | |
7644 | ioc->scsih_cmds.status = MPT2_CMD_NOT_USED; | |
7645 | mutex_unlock(&ioc->scsih_cmds.mutex); | |
7646 | } | |
7647 | ||
7648 | /** | |
7649 | * _scsih_shutdown - routine call during system shutdown | |
7650 | * @pdev: PCI device struct | |
7651 | * | |
7652 | * Return nothing. | |
7653 | */ | |
7654 | static void | |
7655 | _scsih_shutdown(struct pci_dev *pdev) | |
7656 | { | |
7657 | struct Scsi_Host *shost = pci_get_drvdata(pdev); | |
7658 | struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); | |
f1c35e6a KD |
7659 | struct workqueue_struct *wq; |
7660 | unsigned long flags; | |
7661 | ||
7662 | ioc->remove_host = 1; | |
7663 | _scsih_fw_event_cleanup_queue(ioc); | |
7664 | ||
7665 | spin_lock_irqsave(&ioc->fw_event_lock, flags); | |
7666 | wq = ioc->firmware_event_thread; | |
7667 | ioc->firmware_event_thread = NULL; | |
7668 | spin_unlock_irqrestore(&ioc->fw_event_lock, flags); | |
7669 | if (wq) | |
7670 | destroy_workqueue(wq); | |
744090d3 KD |
7671 | |
7672 | _scsih_ir_shutdown(ioc); | |
7673 | mpt2sas_base_detach(ioc); | |
7674 | } | |
7675 | ||
635374e7 | 7676 | /** |
d5d135b3 | 7677 | * _scsih_remove - detach and remove add host |
635374e7 EM |
7678 | * @pdev: PCI device struct |
7679 | * | |
744090d3 | 7680 | * Routine called when unloading the driver. |
635374e7 EM |
7681 | * Return nothing. |
7682 | */ | |
7683 | static void __devexit | |
d5d135b3 | 7684 | _scsih_remove(struct pci_dev *pdev) |
635374e7 EM |
7685 | { |
7686 | struct Scsi_Host *shost = pci_get_drvdata(pdev); | |
7687 | struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); | |
7f6f794d | 7688 | struct _sas_port *mpt2sas_port, *next_port; |
d7384b28 KD |
7689 | struct _raid_device *raid_device, *next; |
7690 | struct MPT2SAS_TARGET *sas_target_priv_data; | |
635374e7 EM |
7691 | struct workqueue_struct *wq; |
7692 | unsigned long flags; | |
7693 | ||
7694 | ioc->remove_host = 1; | |
f1c35e6a | 7695 | _scsih_fw_event_cleanup_queue(ioc); |
635374e7 EM |
7696 | |
7697 | spin_lock_irqsave(&ioc->fw_event_lock, flags); | |
7698 | wq = ioc->firmware_event_thread; | |
7699 | ioc->firmware_event_thread = NULL; | |
7700 | spin_unlock_irqrestore(&ioc->fw_event_lock, flags); | |
7701 | if (wq) | |
7702 | destroy_workqueue(wq); | |
7703 | ||
d7384b28 | 7704 | /* release all the volumes */ |
3a9c913a | 7705 | _scsih_ir_shutdown(ioc); |
d7384b28 KD |
7706 | list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list, |
7707 | list) { | |
7708 | if (raid_device->starget) { | |
7709 | sas_target_priv_data = | |
7710 | raid_device->starget->hostdata; | |
7711 | sas_target_priv_data->deleted = 1; | |
7712 | scsi_remove_target(&raid_device->starget->dev); | |
7713 | } | |
7714 | printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid" | |
7715 | "(0x%016llx)\n", ioc->name, raid_device->handle, | |
7716 | (unsigned long long) raid_device->wwid); | |
7717 | _scsih_raid_device_remove(ioc, raid_device); | |
7718 | } | |
7719 | ||
635374e7 | 7720 | /* free ports attached to the sas_host */ |
7f6f794d | 7721 | list_for_each_entry_safe(mpt2sas_port, next_port, |
635374e7 EM |
7722 | &ioc->sas_hba.sas_port_list, port_list) { |
7723 | if (mpt2sas_port->remote_identify.device_type == | |
7f6f794d | 7724 | SAS_END_DEVICE) |
09da0b32 | 7725 | mpt2sas_device_remove_by_sas_address(ioc, |
7f6f794d KD |
7726 | mpt2sas_port->remote_identify.sas_address); |
7727 | else if (mpt2sas_port->remote_identify.device_type == | |
7728 | SAS_EDGE_EXPANDER_DEVICE || | |
7729 | mpt2sas_port->remote_identify.device_type == | |
7730 | SAS_FANOUT_EXPANDER_DEVICE) | |
7731 | mpt2sas_expander_remove(ioc, | |
635374e7 | 7732 | mpt2sas_port->remote_identify.sas_address); |
635374e7 EM |
7733 | } |
7734 | ||
7735 | /* free phys attached to the sas_host */ | |
7736 | if (ioc->sas_hba.num_phys) { | |
7737 | kfree(ioc->sas_hba.phy); | |
7738 | ioc->sas_hba.phy = NULL; | |
7739 | ioc->sas_hba.num_phys = 0; | |
7740 | } | |
7741 | ||
7742 | sas_remove_host(shost); | |
9ae89b02 | 7743 | mpt2sas_base_detach(ioc); |
635374e7 EM |
7744 | list_del(&ioc->list); |
7745 | scsi_remove_host(shost); | |
7746 | scsi_host_put(shost); | |
7747 | } | |
7748 | ||
7749 | /** | |
7750 | * _scsih_probe_boot_devices - reports 1st device | |
7751 | * @ioc: per adapter object | |
7752 | * | |
7753 | * If specified in bios page 2, this routine reports the 1st | |
7754 | * device scsi-ml or sas transport for persistent boot device | |
7755 | * purposes. Please refer to function _scsih_determine_boot_device() | |
7756 | */ | |
7757 | static void | |
7758 | _scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc) | |
7759 | { | |
7760 | u8 is_raid; | |
7761 | void *device; | |
7762 | struct _sas_device *sas_device; | |
7763 | struct _raid_device *raid_device; | |
c5e039be KD |
7764 | u16 handle; |
7765 | u64 sas_address_parent; | |
635374e7 EM |
7766 | u64 sas_address; |
7767 | unsigned long flags; | |
7768 | int rc; | |
7769 | ||
921cd802 | 7770 | /* no Bios, return immediately */ |
7771 | if (!ioc->bios_pg3.BiosVersion) | |
7772 | return; | |
7773 | ||
635374e7 | 7774 | device = NULL; |
921cd802 | 7775 | is_raid = 0; |
635374e7 EM |
7776 | if (ioc->req_boot_device.device) { |
7777 | device = ioc->req_boot_device.device; | |
7778 | is_raid = ioc->req_boot_device.is_raid; | |
7779 | } else if (ioc->req_alt_boot_device.device) { | |
7780 | device = ioc->req_alt_boot_device.device; | |
7781 | is_raid = ioc->req_alt_boot_device.is_raid; | |
7782 | } else if (ioc->current_boot_device.device) { | |
7783 | device = ioc->current_boot_device.device; | |
7784 | is_raid = ioc->current_boot_device.is_raid; | |
7785 | } | |
7786 | ||
7787 | if (!device) | |
7788 | return; | |
7789 | ||
7790 | if (is_raid) { | |
7791 | raid_device = device; | |
7792 | rc = scsi_add_device(ioc->shost, RAID_CHANNEL, | |
7793 | raid_device->id, 0); | |
7794 | if (rc) | |
7795 | _scsih_raid_device_remove(ioc, raid_device); | |
7796 | } else { | |
09da0b32 | 7797 | spin_lock_irqsave(&ioc->sas_device_lock, flags); |
635374e7 EM |
7798 | sas_device = device; |
7799 | handle = sas_device->handle; | |
c5e039be | 7800 | sas_address_parent = sas_device->sas_address_parent; |
635374e7 | 7801 | sas_address = sas_device->sas_address; |
635374e7 EM |
7802 | list_move_tail(&sas_device->list, &ioc->sas_device_list); |
7803 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
0bdccdb0 KD |
7804 | |
7805 | if (ioc->hide_drives) | |
7806 | return; | |
635374e7 | 7807 | if (!mpt2sas_transport_port_add(ioc, sas_device->handle, |
c5e039be | 7808 | sas_device->sas_address_parent)) { |
635374e7 EM |
7809 | _scsih_sas_device_remove(ioc, sas_device); |
7810 | } else if (!sas_device->starget) { | |
35116db9 | 7811 | if (!ioc->is_driver_loading) |
7812 | mpt2sas_transport_port_remove(ioc, sas_address, | |
7813 | sas_address_parent); | |
635374e7 EM |
7814 | _scsih_sas_device_remove(ioc, sas_device); |
7815 | } | |
7816 | } | |
7817 | } | |
7818 | ||
7819 | /** | |
7820 | * _scsih_probe_raid - reporting raid volumes to scsi-ml | |
7821 | * @ioc: per adapter object | |
7822 | * | |
7823 | * Called during initial loading of the driver. | |
7824 | */ | |
7825 | static void | |
7826 | _scsih_probe_raid(struct MPT2SAS_ADAPTER *ioc) | |
7827 | { | |
7828 | struct _raid_device *raid_device, *raid_next; | |
7829 | int rc; | |
7830 | ||
7831 | list_for_each_entry_safe(raid_device, raid_next, | |
7832 | &ioc->raid_device_list, list) { | |
7833 | if (raid_device->starget) | |
7834 | continue; | |
7835 | rc = scsi_add_device(ioc->shost, RAID_CHANNEL, | |
7836 | raid_device->id, 0); | |
7837 | if (rc) | |
7838 | _scsih_raid_device_remove(ioc, raid_device); | |
7839 | } | |
7840 | } | |
7841 | ||
7842 | /** | |
77e63ed4 | 7843 | * _scsih_probe_sas - reporting sas devices to sas transport |
635374e7 EM |
7844 | * @ioc: per adapter object |
7845 | * | |
7846 | * Called during initial loading of the driver. | |
7847 | */ | |
7848 | static void | |
7849 | _scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc) | |
7850 | { | |
7851 | struct _sas_device *sas_device, *next; | |
7852 | unsigned long flags; | |
635374e7 EM |
7853 | |
7854 | /* SAS Device List */ | |
7855 | list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list, | |
7856 | list) { | |
635374e7 | 7857 | |
0bdccdb0 KD |
7858 | if (ioc->hide_drives) |
7859 | continue; | |
7860 | ||
c5e039be KD |
7861 | if (!mpt2sas_transport_port_add(ioc, sas_device->handle, |
7862 | sas_device->sas_address_parent)) { | |
0167ac67 | 7863 | list_del(&sas_device->list); |
7864 | kfree(sas_device); | |
7865 | continue; | |
635374e7 | 7866 | } else if (!sas_device->starget) { |
35116db9 | 7867 | if (!ioc->is_driver_loading) |
7868 | mpt2sas_transport_port_remove(ioc, | |
7869 | sas_device->sas_address, | |
7870 | sas_device->sas_address_parent); | |
0167ac67 | 7871 | list_del(&sas_device->list); |
7872 | kfree(sas_device); | |
7873 | continue; | |
7874 | ||
635374e7 | 7875 | } |
0167ac67 | 7876 | spin_lock_irqsave(&ioc->sas_device_lock, flags); |
7877 | list_move_tail(&sas_device->list, &ioc->sas_device_list); | |
7878 | spin_unlock_irqrestore(&ioc->sas_device_lock, flags); | |
635374e7 EM |
7879 | } |
7880 | } | |
7881 | ||
7882 | /** | |
7883 | * _scsih_probe_devices - probing for devices | |
7884 | * @ioc: per adapter object | |
7885 | * | |
7886 | * Called during initial loading of the driver. | |
7887 | */ | |
7888 | static void | |
7889 | _scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc) | |
7890 | { | |
921cd802 | 7891 | u16 volume_mapping_flags; |
635374e7 EM |
7892 | |
7893 | if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR)) | |
7894 | return; /* return when IOC doesn't support initiator mode */ | |
7895 | ||
7896 | _scsih_probe_boot_devices(ioc); | |
7897 | ||
7898 | if (ioc->ir_firmware) { | |
921cd802 | 7899 | volume_mapping_flags = |
7900 | le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) & | |
7901 | MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE; | |
7902 | if (volume_mapping_flags == | |
7903 | MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) { | |
635374e7 | 7904 | _scsih_probe_raid(ioc); |
921cd802 | 7905 | _scsih_probe_sas(ioc); |
635374e7 | 7906 | } else { |
635374e7 | 7907 | _scsih_probe_sas(ioc); |
921cd802 | 7908 | _scsih_probe_raid(ioc); |
635374e7 EM |
7909 | } |
7910 | } else | |
7911 | _scsih_probe_sas(ioc); | |
7912 | } | |
7913 | ||
921cd802 | 7914 | |
7915 | /** | |
7916 | * _scsih_scan_start - scsi lld callback for .scan_start | |
7917 | * @shost: SCSI host pointer | |
7918 | * | |
7919 | * The shost has the ability to discover targets on its own instead | |
7920 | * of scanning the entire bus. In our implemention, we will kick off | |
7921 | * firmware discovery. | |
7922 | */ | |
7923 | static void | |
7924 | _scsih_scan_start(struct Scsi_Host *shost) | |
7925 | { | |
7926 | struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); | |
7927 | int rc; | |
7928 | ||
7929 | if (diag_buffer_enable != -1 && diag_buffer_enable != 0) | |
7930 | mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable); | |
7931 | ||
7932 | ioc->start_scan = 1; | |
7933 | rc = mpt2sas_port_enable(ioc); | |
7934 | ||
7935 | if (rc != 0) | |
7936 | printk(MPT2SAS_INFO_FMT "port enable: FAILED\n", ioc->name); | |
7937 | } | |
7938 | ||
7939 | /** | |
7940 | * _scsih_scan_finished - scsi lld callback for .scan_finished | |
7941 | * @shost: SCSI host pointer | |
7942 | * @time: elapsed time of the scan in jiffies | |
7943 | * | |
7944 | * This function will be called periodically until it returns 1 with the | |
7945 | * scsi_host and the elapsed time of the scan in jiffies. In our implemention, | |
7946 | * we wait for firmware discovery to complete, then return 1. | |
7947 | */ | |
7948 | static int | |
7949 | _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time) | |
7950 | { | |
7951 | struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); | |
7952 | ||
7953 | if (time >= (300 * HZ)) { | |
7954 | ioc->base_cmds.status = MPT2_CMD_NOT_USED; | |
7955 | printk(MPT2SAS_INFO_FMT "port enable: FAILED with timeout " | |
7956 | "(timeout=300s)\n", ioc->name); | |
7957 | ioc->is_driver_loading = 0; | |
7958 | return 1; | |
7959 | } | |
7960 | ||
7961 | if (ioc->start_scan) | |
7962 | return 0; | |
7963 | ||
7964 | if (ioc->start_scan_failed) { | |
7965 | printk(MPT2SAS_INFO_FMT "port enable: FAILED with " | |
7966 | "(ioc_status=0x%08x)\n", ioc->name, ioc->start_scan_failed); | |
7967 | ioc->is_driver_loading = 0; | |
7968 | ioc->wait_for_discovery_to_complete = 0; | |
7969 | ioc->remove_host = 1; | |
7970 | return 1; | |
7971 | } | |
7972 | ||
7973 | printk(MPT2SAS_INFO_FMT "port enable: SUCCESS\n", ioc->name); | |
7974 | ioc->base_cmds.status = MPT2_CMD_NOT_USED; | |
7975 | ||
7976 | if (ioc->wait_for_discovery_to_complete) { | |
7977 | ioc->wait_for_discovery_to_complete = 0; | |
7978 | _scsih_probe_devices(ioc); | |
7979 | } | |
7980 | mpt2sas_base_start_watchdog(ioc); | |
7981 | ioc->is_driver_loading = 0; | |
7982 | return 1; | |
7983 | } | |
7984 | ||
7985 | ||
635374e7 | 7986 | /** |
d5d135b3 | 7987 | * _scsih_probe - attach and add scsi host |
635374e7 EM |
7988 | * @pdev: PCI device struct |
7989 | * @id: pci device id | |
7990 | * | |
7991 | * Returns 0 success, anything else error. | |
7992 | */ | |
7993 | static int | |
d5d135b3 | 7994 | _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
635374e7 EM |
7995 | { |
7996 | struct MPT2SAS_ADAPTER *ioc; | |
7997 | struct Scsi_Host *shost; | |
7998 | ||
7999 | shost = scsi_host_alloc(&scsih_driver_template, | |
8000 | sizeof(struct MPT2SAS_ADAPTER)); | |
8001 | if (!shost) | |
8002 | return -ENODEV; | |
8003 | ||
8004 | /* init local params */ | |
8005 | ioc = shost_priv(shost); | |
8006 | memset(ioc, 0, sizeof(struct MPT2SAS_ADAPTER)); | |
8007 | INIT_LIST_HEAD(&ioc->list); | |
ba33fadf | 8008 | list_add_tail(&ioc->list, &mpt2sas_ioc_list); |
635374e7 EM |
8009 | ioc->shost = shost; |
8010 | ioc->id = mpt_ids++; | |
8011 | sprintf(ioc->name, "%s%d", MPT2SAS_DRIVER_NAME, ioc->id); | |
8012 | ioc->pdev = pdev; | |
0bdccdb0 KD |
8013 | if (id->device == MPI2_MFGPAGE_DEVID_SSS6200) { |
8014 | ioc->is_warpdrive = 1; | |
8015 | ioc->hide_ir_msg = 1; | |
8016 | } else | |
8017 | ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS; | |
635374e7 EM |
8018 | ioc->scsi_io_cb_idx = scsi_io_cb_idx; |
8019 | ioc->tm_cb_idx = tm_cb_idx; | |
8020 | ioc->ctl_cb_idx = ctl_cb_idx; | |
8021 | ioc->base_cb_idx = base_cb_idx; | |
921cd802 | 8022 | ioc->port_enable_cb_idx = port_enable_cb_idx; |
635374e7 | 8023 | ioc->transport_cb_idx = transport_cb_idx; |
744090d3 | 8024 | ioc->scsih_cb_idx = scsih_cb_idx; |
635374e7 | 8025 | ioc->config_cb_idx = config_cb_idx; |
77e63ed4 | 8026 | ioc->tm_tr_cb_idx = tm_tr_cb_idx; |
f3eedd69 | 8027 | ioc->tm_tr_volume_cb_idx = tm_tr_volume_cb_idx; |
77e63ed4 | 8028 | ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx; |
635374e7 | 8029 | ioc->logging_level = logging_level; |
845a0e40 | 8030 | ioc->schedule_dead_ioc_flush_running_cmds = &_scsih_flush_running_cmds; |
635374e7 | 8031 | /* misc semaphores and spin locks */ |
d274213a | 8032 | mutex_init(&ioc->reset_in_progress_mutex); |
635374e7 EM |
8033 | spin_lock_init(&ioc->ioc_reset_in_progress_lock); |
8034 | spin_lock_init(&ioc->scsi_lookup_lock); | |
8035 | spin_lock_init(&ioc->sas_device_lock); | |
8036 | spin_lock_init(&ioc->sas_node_lock); | |
8037 | spin_lock_init(&ioc->fw_event_lock); | |
8038 | spin_lock_init(&ioc->raid_device_lock); | |
8039 | ||
8040 | INIT_LIST_HEAD(&ioc->sas_device_list); | |
8041 | INIT_LIST_HEAD(&ioc->sas_device_init_list); | |
8042 | INIT_LIST_HEAD(&ioc->sas_expander_list); | |
8043 | INIT_LIST_HEAD(&ioc->fw_event_list); | |
8044 | INIT_LIST_HEAD(&ioc->raid_device_list); | |
8045 | INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list); | |
77e63ed4 | 8046 | INIT_LIST_HEAD(&ioc->delayed_tr_list); |
f3eedd69 | 8047 | INIT_LIST_HEAD(&ioc->delayed_tr_volume_list); |
635374e7 EM |
8048 | |
8049 | /* init shost parameters */ | |
d334aa79 | 8050 | shost->max_cmd_len = 32; |
635374e7 EM |
8051 | shost->max_lun = max_lun; |
8052 | shost->transportt = mpt2sas_transport_template; | |
8053 | shost->unique_id = ioc->id; | |
8054 | ||
a3e1e55e KD |
8055 | if (max_sectors != 0xFFFF) { |
8056 | if (max_sectors < 64) { | |
8057 | shost->max_sectors = 64; | |
8058 | printk(MPT2SAS_WARN_FMT "Invalid value %d passed " | |
8059 | "for max_sectors, range is 64 to 8192. Assigning " | |
8060 | "value of 64.\n", ioc->name, max_sectors); | |
9ac49d3a | 8061 | } else if (max_sectors > 32767) { |
8062 | shost->max_sectors = 32767; | |
a3e1e55e KD |
8063 | printk(MPT2SAS_WARN_FMT "Invalid value %d passed " |
8064 | "for max_sectors, range is 64 to 8192. Assigning " | |
9ac49d3a | 8065 | "default value of 32767.\n", ioc->name, |
a3e1e55e KD |
8066 | max_sectors); |
8067 | } else { | |
8068 | shost->max_sectors = max_sectors & 0xFFFE; | |
8069 | printk(MPT2SAS_INFO_FMT "The max_sectors value is " | |
8070 | "set to %d\n", ioc->name, shost->max_sectors); | |
8071 | } | |
8072 | } | |
8073 | ||
635374e7 EM |
8074 | if ((scsi_add_host(shost, &pdev->dev))) { |
8075 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
8076 | ioc->name, __FILE__, __LINE__, __func__); | |
8077 | list_del(&ioc->list); | |
8078 | goto out_add_shost_fail; | |
8079 | } | |
8080 | ||
3c621b3e | 8081 | scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION |
d334aa79 | 8082 | | SHOST_DIF_TYPE2_PROTECTION | SHOST_DIF_TYPE3_PROTECTION); |
77e63ed4 | 8083 | scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC); |
3c621b3e | 8084 | |
635374e7 EM |
8085 | /* event thread */ |
8086 | snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name), | |
8087 | "fw_event%d", ioc->id); | |
8088 | ioc->firmware_event_thread = create_singlethread_workqueue( | |
8089 | ioc->firmware_event_name); | |
8090 | if (!ioc->firmware_event_thread) { | |
8091 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
8092 | ioc->name, __FILE__, __LINE__, __func__); | |
8093 | goto out_thread_fail; | |
8094 | } | |
8095 | ||
921cd802 | 8096 | ioc->is_driver_loading = 1; |
635374e7 EM |
8097 | if ((mpt2sas_base_attach(ioc))) { |
8098 | printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", | |
8099 | ioc->name, __FILE__, __LINE__, __func__); | |
8100 | goto out_attach_fail; | |
8101 | } | |
8102 | ||
0bdccdb0 KD |
8103 | if (ioc->is_warpdrive) { |
8104 | if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS) | |
8105 | ioc->hide_drives = 0; | |
8106 | else if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_HIDE_ALL_DISKS) | |
8107 | ioc->hide_drives = 1; | |
8108 | else { | |
8109 | if (_scsih_get_num_volumes(ioc)) | |
8110 | ioc->hide_drives = 1; | |
8111 | else | |
8112 | ioc->hide_drives = 0; | |
8113 | } | |
8114 | } else | |
8115 | ioc->hide_drives = 0; | |
2cb6fc8c | 8116 | scsi_scan_host(shost); |
0bdccdb0 | 8117 | |
635374e7 EM |
8118 | return 0; |
8119 | ||
8120 | out_attach_fail: | |
8121 | destroy_workqueue(ioc->firmware_event_thread); | |
8122 | out_thread_fail: | |
8123 | list_del(&ioc->list); | |
8124 | scsi_remove_host(shost); | |
921cd802 | 8125 | scsi_host_put(shost); |
635374e7 EM |
8126 | out_add_shost_fail: |
8127 | return -ENODEV; | |
8128 | } | |
8129 | ||
8130 | #ifdef CONFIG_PM | |
8131 | /** | |
d5d135b3 | 8132 | * _scsih_suspend - power management suspend main entry point |
635374e7 EM |
8133 | * @pdev: PCI device struct |
8134 | * @state: PM state change to (usually PCI_D3) | |
8135 | * | |
8136 | * Returns 0 success, anything else error. | |
8137 | */ | |
8138 | static int | |
d5d135b3 | 8139 | _scsih_suspend(struct pci_dev *pdev, pm_message_t state) |
635374e7 EM |
8140 | { |
8141 | struct Scsi_Host *shost = pci_get_drvdata(pdev); | |
8142 | struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); | |
c97951ec | 8143 | pci_power_t device_state; |
635374e7 | 8144 | |
e4750c98 | 8145 | mpt2sas_base_stop_watchdog(ioc); |
635374e7 EM |
8146 | scsi_block_requests(shost); |
8147 | device_state = pci_choose_state(pdev, state); | |
8148 | printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, entering " | |
8149 | "operating state [D%d]\n", ioc->name, pdev, | |
8150 | pci_name(pdev), device_state); | |
8151 | ||
8152 | mpt2sas_base_free_resources(ioc); | |
8153 | pci_save_state(pdev); | |
8154 | pci_disable_device(pdev); | |
8155 | pci_set_power_state(pdev, device_state); | |
8156 | return 0; | |
8157 | } | |
8158 | ||
8159 | /** | |
d5d135b3 | 8160 | * _scsih_resume - power management resume main entry point |
635374e7 EM |
8161 | * @pdev: PCI device struct |
8162 | * | |
8163 | * Returns 0 success, anything else error. | |
8164 | */ | |
8165 | static int | |
d5d135b3 | 8166 | _scsih_resume(struct pci_dev *pdev) |
635374e7 EM |
8167 | { |
8168 | struct Scsi_Host *shost = pci_get_drvdata(pdev); | |
8169 | struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); | |
c97951ec | 8170 | pci_power_t device_state = pdev->current_state; |
635374e7 EM |
8171 | int r; |
8172 | ||
8173 | printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, previous " | |
8174 | "operating state [D%d]\n", ioc->name, pdev, | |
8175 | pci_name(pdev), device_state); | |
8176 | ||
8177 | pci_set_power_state(pdev, PCI_D0); | |
8178 | pci_enable_wake(pdev, PCI_D0, 0); | |
8179 | pci_restore_state(pdev); | |
8180 | ioc->pdev = pdev; | |
8181 | r = mpt2sas_base_map_resources(ioc); | |
8182 | if (r) | |
8183 | return r; | |
8184 | ||
8185 | mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET); | |
8186 | scsi_unblock_requests(shost); | |
e4750c98 | 8187 | mpt2sas_base_start_watchdog(ioc); |
635374e7 EM |
8188 | return 0; |
8189 | } | |
8190 | #endif /* CONFIG_PM */ | |
8191 | ||
ef7c80c1 KD |
8192 | /** |
8193 | * _scsih_pci_error_detected - Called when a PCI error is detected. | |
8194 | * @pdev: PCI device struct | |
8195 | * @state: PCI channel state | |
8196 | * | |
8197 | * Description: Called when a PCI error is detected. | |
8198 | * | |
8199 | * Return value: | |
8200 | * PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT | |
8201 | */ | |
8202 | static pci_ers_result_t | |
8203 | _scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) | |
8204 | { | |
8205 | struct Scsi_Host *shost = pci_get_drvdata(pdev); | |
8206 | struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); | |
8207 | ||
8208 | printk(MPT2SAS_INFO_FMT "PCI error: detected callback, state(%d)!!\n", | |
8209 | ioc->name, state); | |
8210 | ||
8211 | switch (state) { | |
8212 | case pci_channel_io_normal: | |
8213 | return PCI_ERS_RESULT_CAN_RECOVER; | |
8214 | case pci_channel_io_frozen: | |
3cb5469a EM |
8215 | /* Fatal error, prepare for slot reset */ |
8216 | ioc->pci_error_recovery = 1; | |
ef7c80c1 KD |
8217 | scsi_block_requests(ioc->shost); |
8218 | mpt2sas_base_stop_watchdog(ioc); | |
8219 | mpt2sas_base_free_resources(ioc); | |
8220 | return PCI_ERS_RESULT_NEED_RESET; | |
8221 | case pci_channel_io_perm_failure: | |
3cb5469a EM |
8222 | /* Permanent error, prepare for device removal */ |
8223 | ioc->pci_error_recovery = 1; | |
8224 | mpt2sas_base_stop_watchdog(ioc); | |
8225 | _scsih_flush_running_cmds(ioc); | |
ef7c80c1 KD |
8226 | return PCI_ERS_RESULT_DISCONNECT; |
8227 | } | |
8228 | return PCI_ERS_RESULT_NEED_RESET; | |
8229 | } | |
8230 | ||
8231 | /** | |
8232 | * _scsih_pci_slot_reset - Called when PCI slot has been reset. | |
8233 | * @pdev: PCI device struct | |
8234 | * | |
8235 | * Description: This routine is called by the pci error recovery | |
8236 | * code after the PCI slot has been reset, just before we | |
8237 | * should resume normal operations. | |
8238 | */ | |
8239 | static pci_ers_result_t | |
8240 | _scsih_pci_slot_reset(struct pci_dev *pdev) | |
8241 | { | |
8242 | struct Scsi_Host *shost = pci_get_drvdata(pdev); | |
8243 | struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); | |
8244 | int rc; | |
8245 | ||
8246 | printk(MPT2SAS_INFO_FMT "PCI error: slot reset callback!!\n", | |
8247 | ioc->name); | |
8248 | ||
3cb5469a | 8249 | ioc->pci_error_recovery = 0; |
ef7c80c1 | 8250 | ioc->pdev = pdev; |
3cb5469a | 8251 | pci_restore_state(pdev); |
ef7c80c1 KD |
8252 | rc = mpt2sas_base_map_resources(ioc); |
8253 | if (rc) | |
8254 | return PCI_ERS_RESULT_DISCONNECT; | |
8255 | ||
8256 | ||
8257 | rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, | |
8258 | FORCE_BIG_HAMMER); | |
8259 | ||
8260 | printk(MPT2SAS_WARN_FMT "hard reset: %s\n", ioc->name, | |
8261 | (rc == 0) ? "success" : "failed"); | |
8262 | ||
8263 | if (!rc) | |
8264 | return PCI_ERS_RESULT_RECOVERED; | |
8265 | else | |
8266 | return PCI_ERS_RESULT_DISCONNECT; | |
8267 | } | |
8268 | ||
8269 | /** | |
8270 | * _scsih_pci_resume() - resume normal ops after PCI reset | |
8271 | * @pdev: pointer to PCI device | |
8272 | * | |
8273 | * Called when the error recovery driver tells us that its | |
8274 | * OK to resume normal operation. Use completion to allow | |
8275 | * halted scsi ops to resume. | |
8276 | */ | |
8277 | static void | |
8278 | _scsih_pci_resume(struct pci_dev *pdev) | |
8279 | { | |
8280 | struct Scsi_Host *shost = pci_get_drvdata(pdev); | |
8281 | struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); | |
8282 | ||
8283 | printk(MPT2SAS_INFO_FMT "PCI error: resume callback!!\n", ioc->name); | |
8284 | ||
8285 | pci_cleanup_aer_uncorrect_error_status(pdev); | |
8286 | mpt2sas_base_start_watchdog(ioc); | |
8287 | scsi_unblock_requests(ioc->shost); | |
8288 | } | |
8289 | ||
8290 | /** | |
8291 | * _scsih_pci_mmio_enabled - Enable MMIO and dump debug registers | |
8292 | * @pdev: pointer to PCI device | |
8293 | */ | |
8294 | static pci_ers_result_t | |
8295 | _scsih_pci_mmio_enabled(struct pci_dev *pdev) | |
8296 | { | |
8297 | struct Scsi_Host *shost = pci_get_drvdata(pdev); | |
8298 | struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); | |
8299 | ||
8300 | printk(MPT2SAS_INFO_FMT "PCI error: mmio enabled callback!!\n", | |
8301 | ioc->name); | |
8302 | ||
8303 | /* TODO - dump whatever for debugging purposes */ | |
8304 | ||
8305 | /* Request a slot reset. */ | |
8306 | return PCI_ERS_RESULT_NEED_RESET; | |
8307 | } | |
8308 | ||
8309 | static struct pci_error_handlers _scsih_err_handler = { | |
8310 | .error_detected = _scsih_pci_error_detected, | |
8311 | .mmio_enabled = _scsih_pci_mmio_enabled, | |
8312 | .slot_reset = _scsih_pci_slot_reset, | |
8313 | .resume = _scsih_pci_resume, | |
8314 | }; | |
635374e7 EM |
8315 | |
8316 | static struct pci_driver scsih_driver = { | |
8317 | .name = MPT2SAS_DRIVER_NAME, | |
8318 | .id_table = scsih_pci_table, | |
d5d135b3 EM |
8319 | .probe = _scsih_probe, |
8320 | .remove = __devexit_p(_scsih_remove), | |
744090d3 | 8321 | .shutdown = _scsih_shutdown, |
ef7c80c1 | 8322 | .err_handler = &_scsih_err_handler, |
635374e7 | 8323 | #ifdef CONFIG_PM |
d5d135b3 EM |
8324 | .suspend = _scsih_suspend, |
8325 | .resume = _scsih_resume, | |
635374e7 EM |
8326 | #endif |
8327 | }; | |
8328 | ||
f7c95ef0 KD |
8329 | /* raid transport support */ |
8330 | static struct raid_function_template mpt2sas_raid_functions = { | |
8331 | .cookie = &scsih_driver_template, | |
8332 | .is_raid = _scsih_is_raid, | |
8333 | .get_resync = _scsih_get_resync, | |
8334 | .get_state = _scsih_get_state, | |
8335 | }; | |
635374e7 EM |
8336 | |
8337 | /** | |
d5d135b3 | 8338 | * _scsih_init - main entry point for this driver. |
635374e7 EM |
8339 | * |
8340 | * Returns 0 success, anything else error. | |
8341 | */ | |
8342 | static int __init | |
d5d135b3 | 8343 | _scsih_init(void) |
635374e7 EM |
8344 | { |
8345 | int error; | |
8346 | ||
8347 | mpt_ids = 0; | |
8348 | printk(KERN_INFO "%s version %s loaded\n", MPT2SAS_DRIVER_NAME, | |
8349 | MPT2SAS_DRIVER_VERSION); | |
8350 | ||
8351 | mpt2sas_transport_template = | |
8352 | sas_attach_transport(&mpt2sas_transport_functions); | |
8353 | if (!mpt2sas_transport_template) | |
8354 | return -ENODEV; | |
f7c95ef0 KD |
8355 | /* raid transport support */ |
8356 | mpt2sas_raid_template = raid_class_attach(&mpt2sas_raid_functions); | |
8357 | if (!mpt2sas_raid_template) { | |
8358 | sas_release_transport(mpt2sas_transport_template); | |
8359 | return -ENODEV; | |
8360 | } | |
635374e7 EM |
8361 | |
8362 | mpt2sas_base_initialize_callback_handler(); | |
8363 | ||
8364 | /* queuecommand callback hander */ | |
d5d135b3 | 8365 | scsi_io_cb_idx = mpt2sas_base_register_callback_handler(_scsih_io_done); |
635374e7 | 8366 | |
65155b37 | 8367 | /* task management callback handler */ |
d5d135b3 | 8368 | tm_cb_idx = mpt2sas_base_register_callback_handler(_scsih_tm_done); |
635374e7 EM |
8369 | |
8370 | /* base internal commands callback handler */ | |
8371 | base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done); | |
921cd802 | 8372 | port_enable_cb_idx = mpt2sas_base_register_callback_handler( |
8373 | mpt2sas_port_enable_done); | |
635374e7 EM |
8374 | |
8375 | /* transport internal commands callback handler */ | |
8376 | transport_cb_idx = mpt2sas_base_register_callback_handler( | |
8377 | mpt2sas_transport_done); | |
8378 | ||
744090d3 KD |
8379 | /* scsih internal commands callback handler */ |
8380 | scsih_cb_idx = mpt2sas_base_register_callback_handler(_scsih_done); | |
8381 | ||
635374e7 EM |
8382 | /* configuration page API internal commands callback handler */ |
8383 | config_cb_idx = mpt2sas_base_register_callback_handler( | |
8384 | mpt2sas_config_done); | |
8385 | ||
8386 | /* ctl module callback handler */ | |
8387 | ctl_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_ctl_done); | |
8388 | ||
77e63ed4 KD |
8389 | tm_tr_cb_idx = mpt2sas_base_register_callback_handler( |
8390 | _scsih_tm_tr_complete); | |
f3eedd69 KD |
8391 | |
8392 | tm_tr_volume_cb_idx = mpt2sas_base_register_callback_handler( | |
8393 | _scsih_tm_volume_tr_complete); | |
8394 | ||
77e63ed4 KD |
8395 | tm_sas_control_cb_idx = mpt2sas_base_register_callback_handler( |
8396 | _scsih_sas_control_complete); | |
8397 | ||
635374e7 EM |
8398 | mpt2sas_ctl_init(); |
8399 | ||
8400 | error = pci_register_driver(&scsih_driver); | |
f7c95ef0 KD |
8401 | if (error) { |
8402 | /* raid transport support */ | |
8403 | raid_class_release(mpt2sas_raid_template); | |
635374e7 | 8404 | sas_release_transport(mpt2sas_transport_template); |
f7c95ef0 | 8405 | } |
635374e7 EM |
8406 | |
8407 | return error; | |
8408 | } | |
8409 | ||
8410 | /** | |
d5d135b3 | 8411 | * _scsih_exit - exit point for this driver (when it is a module). |
635374e7 EM |
8412 | * |
8413 | * Returns 0 success, anything else error. | |
8414 | */ | |
8415 | static void __exit | |
d5d135b3 | 8416 | _scsih_exit(void) |
635374e7 EM |
8417 | { |
8418 | printk(KERN_INFO "mpt2sas version %s unloading\n", | |
8419 | MPT2SAS_DRIVER_VERSION); | |
8420 | ||
8421 | pci_unregister_driver(&scsih_driver); | |
8422 | ||
f7c95ef0 KD |
8423 | mpt2sas_ctl_exit(); |
8424 | ||
635374e7 EM |
8425 | mpt2sas_base_release_callback_handler(scsi_io_cb_idx); |
8426 | mpt2sas_base_release_callback_handler(tm_cb_idx); | |
8427 | mpt2sas_base_release_callback_handler(base_cb_idx); | |
921cd802 | 8428 | mpt2sas_base_release_callback_handler(port_enable_cb_idx); |
635374e7 | 8429 | mpt2sas_base_release_callback_handler(transport_cb_idx); |
744090d3 | 8430 | mpt2sas_base_release_callback_handler(scsih_cb_idx); |
635374e7 EM |
8431 | mpt2sas_base_release_callback_handler(config_cb_idx); |
8432 | mpt2sas_base_release_callback_handler(ctl_cb_idx); | |
8433 | ||
77e63ed4 | 8434 | mpt2sas_base_release_callback_handler(tm_tr_cb_idx); |
f3eedd69 | 8435 | mpt2sas_base_release_callback_handler(tm_tr_volume_cb_idx); |
77e63ed4 KD |
8436 | mpt2sas_base_release_callback_handler(tm_sas_control_cb_idx); |
8437 | ||
f7c95ef0 KD |
8438 | /* raid transport support */ |
8439 | raid_class_release(mpt2sas_raid_template); | |
8440 | sas_release_transport(mpt2sas_transport_template); | |
8441 | ||
635374e7 EM |
8442 | } |
8443 | ||
d5d135b3 EM |
8444 | module_init(_scsih_init); |
8445 | module_exit(_scsih_exit); |