Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * This driver adapted from Drew Eckhardt's Trantor T128 driver | |
3 | * | |
4 | * Copyright 1993, Drew Eckhardt | |
5 | * Visionary Computing | |
6 | * (Unix and Linux consulting and custom programming) | |
7 | * drew@colorado.edu | |
8 | * +1 (303) 666-5836 | |
9 | * | |
10 | * ( Based on T128 - DISTRIBUTION RELEASE 3. ) | |
11 | * | |
12 | * Modified to work with the Pro Audio Spectrum/Studio 16 | |
13 | * by John Weidman. | |
14 | * | |
15 | * | |
16 | * For more information, please consult | |
17 | * | |
18 | * Media Vision | |
19 | * (510) 770-8600 | |
20 | * (800) 348-7116 | |
1da177e4 LT |
21 | */ |
22 | ||
23 | /* | |
1da177e4 LT |
24 | * The card is detected and initialized in one of several ways : |
25 | * 1. Autoprobe (default) - There are many different models of | |
26 | * the Pro Audio Spectrum/Studio 16, and I only have one of | |
27 | * them, so this may require a little tweaking. An interrupt | |
28 | * is triggered to autoprobe for the interrupt line. Note: | |
29 | * with the newer model boards, the interrupt is set via | |
30 | * software after reset using the default_irq for the | |
31 | * current board number. | |
32 | * | |
33 | * 2. With command line overrides - pas16=port,irq may be | |
34 | * used on the LILO command line to override the defaults. | |
35 | * | |
36 | * 3. With the PAS16_OVERRIDE compile time define. This is | |
37 | * specified as an array of address, irq tuples. Ie, for | |
38 | * one board at the default 0x388 address, IRQ10, I could say | |
39 | * -DPAS16_OVERRIDE={{0x388, 10}} | |
40 | * NOTE: Untested. | |
41 | * | |
42 | * 4. When included as a module, with arguments passed on the command line: | |
43 | * pas16_irq=xx the interrupt | |
44 | * pas16_addr=xx the port | |
45 | * e.g. "modprobe pas16 pas16_addr=0x388 pas16_irq=5" | |
46 | * | |
47 | * Note that if the override methods are used, place holders must | |
48 | * be specified for other boards in the system. | |
49 | * | |
50 | * | |
51 | * Configuration notes : | |
52 | * The current driver does not support interrupt sharing with the | |
53 | * sound portion of the card. If you use the same irq for the | |
54 | * scsi port and sound you will have problems. Either use | |
55 | * a different irq for the scsi port or don't use interrupts | |
56 | * for the scsi port. | |
57 | * | |
58 | * If you have problems with your card not being recognized, use | |
59 | * the LILO command line override. Try to get it recognized without | |
60 | * interrupts. Ie, for a board at the default 0x388 base port, | |
22f5f10d | 61 | * boot: linux pas16=0x388,0 |
1da177e4 | 62 | * |
22f5f10d | 63 | * NO_IRQ (0) should be specified for no interrupt, |
1da177e4 LT |
64 | * IRQ_AUTO (254) to autoprobe for an IRQ line if overridden |
65 | * on the command line. | |
1da177e4 LT |
66 | */ |
67 | ||
68 | #include <linux/module.h> | |
69 | ||
1da177e4 LT |
70 | #include <asm/io.h> |
71 | #include <asm/dma.h> | |
72 | #include <linux/blkdev.h> | |
1da177e4 | 73 | #include <linux/interrupt.h> |
1da177e4 LT |
74 | #include <linux/init.h> |
75 | ||
1da177e4 LT |
76 | #include <scsi/scsi_host.h> |
77 | #include "pas16.h" | |
78 | #define AUTOPROBE_IRQ | |
79 | #include "NCR5380.h" | |
80 | ||
81 | ||
d5f7e65d FT |
82 | static unsigned short pas16_addr; |
83 | static int pas16_irq; | |
1da177e4 LT |
84 | |
85 | ||
408b664a | 86 | static const int scsi_irq_translate[] = |
1da177e4 LT |
87 | { 0, 0, 1, 2, 3, 4, 5, 6, 0, 0, 7, 8, 9, 0, 10, 11 }; |
88 | ||
89 | /* The default_irqs array contains values used to set the irq into the | |
90 | * board via software (as must be done on newer model boards without | |
91 | * irq jumpers on the board). The first value in the array will be | |
92 | * assigned to logical board 0, the next to board 1, etc. | |
93 | */ | |
408b664a | 94 | static int default_irqs[] __initdata = |
1da177e4 LT |
95 | { PAS16_DEFAULT_BOARD_1_IRQ, |
96 | PAS16_DEFAULT_BOARD_2_IRQ, | |
97 | PAS16_DEFAULT_BOARD_3_IRQ, | |
98 | PAS16_DEFAULT_BOARD_4_IRQ | |
99 | }; | |
100 | ||
101 | static struct override { | |
102 | unsigned short io_port; | |
103 | int irq; | |
6391a113 | 104 | } overrides |
1da177e4 LT |
105 | #ifdef PAS16_OVERRIDE |
106 | [] __initdata = PAS16_OVERRIDE; | |
107 | #else | |
108 | [4] __initdata = {{0,IRQ_AUTO}, {0,IRQ_AUTO}, {0,IRQ_AUTO}, | |
109 | {0,IRQ_AUTO}}; | |
110 | #endif | |
111 | ||
6391a113 | 112 | #define NO_OVERRIDES ARRAY_SIZE(overrides) |
1da177e4 LT |
113 | |
114 | static struct base { | |
115 | unsigned short io_port; | |
116 | int noauto; | |
6391a113 | 117 | } bases[] __initdata = |
1da177e4 LT |
118 | { {PAS16_DEFAULT_BASE_1, 0}, |
119 | {PAS16_DEFAULT_BASE_2, 0}, | |
120 | {PAS16_DEFAULT_BASE_3, 0}, | |
121 | {PAS16_DEFAULT_BASE_4, 0} | |
122 | }; | |
123 | ||
6391a113 | 124 | #define NO_BASES ARRAY_SIZE(bases) |
1da177e4 | 125 | |
408b664a | 126 | static const unsigned short pas16_offset[ 8 ] = |
1da177e4 LT |
127 | { |
128 | 0x1c00, /* OUTPUT_DATA_REG */ | |
129 | 0x1c01, /* INITIATOR_COMMAND_REG */ | |
130 | 0x1c02, /* MODE_REG */ | |
131 | 0x1c03, /* TARGET_COMMAND_REG */ | |
132 | 0x3c00, /* STATUS_REG ro, SELECT_ENABLE_REG wo */ | |
133 | 0x3c01, /* BUS_AND_STATUS_REG ro, START_DMA_SEND_REG wo */ | |
134 | 0x3c02, /* INPUT_DATA_REGISTER ro, (N/A on PAS16 ?) | |
135 | * START_DMA_TARGET_RECEIVE_REG wo | |
136 | */ | |
137 | 0x3c03, /* RESET_PARITY_INTERRUPT_REG ro, | |
138 | * START_DMA_INITIATOR_RECEIVE_REG wo | |
139 | */ | |
140 | }; | |
1da177e4 LT |
141 | |
142 | ||
143 | /* | |
144 | * Function : enable_board( int board_num, unsigned short port ) | |
145 | * | |
146 | * Purpose : set address in new model board | |
147 | * | |
148 | * Inputs : board_num - logical board number 0-3, port - base address | |
149 | * | |
150 | */ | |
151 | ||
152 | static void __init | |
153 | enable_board( int board_num, unsigned short port ) | |
154 | { | |
155 | outb( 0xbc + board_num, MASTER_ADDRESS_PTR ); | |
156 | outb( port >> 2, MASTER_ADDRESS_PTR ); | |
157 | } | |
158 | ||
159 | ||
160 | ||
161 | /* | |
162 | * Function : init_board( unsigned short port, int irq ) | |
163 | * | |
164 | * Purpose : Set the board up to handle the SCSI interface | |
165 | * | |
166 | * Inputs : port - base address of the board, | |
167 | * irq - irq to assign to the SCSI port | |
168 | * force_irq - set it even if it conflicts with sound driver | |
169 | * | |
170 | */ | |
171 | ||
172 | static void __init | |
173 | init_board( unsigned short io_port, int irq, int force_irq ) | |
174 | { | |
175 | unsigned int tmp; | |
176 | unsigned int pas_irq_code; | |
177 | ||
178 | /* Initialize the SCSI part of the board */ | |
179 | ||
180 | outb( 0x30, io_port + P_TIMEOUT_COUNTER_REG ); /* Timeout counter */ | |
181 | outb( 0x01, io_port + P_TIMEOUT_STATUS_REG_OFFSET ); /* Reset TC */ | |
182 | outb( 0x01, io_port + WAIT_STATE ); /* 1 Wait state */ | |
183 | ||
54d8fe44 | 184 | inb(io_port + pas16_offset[RESET_PARITY_INTERRUPT_REG]); |
1da177e4 LT |
185 | |
186 | /* Set the SCSI interrupt pointer without mucking up the sound | |
187 | * interrupt pointer in the same byte. | |
188 | */ | |
189 | pas_irq_code = ( irq < 16 ) ? scsi_irq_translate[irq] : 0; | |
190 | tmp = inb( io_port + IO_CONFIG_3 ); | |
191 | ||
192 | if( (( tmp & 0x0f ) == pas_irq_code) && pas_irq_code > 0 | |
193 | && !force_irq ) | |
194 | { | |
195 | printk( "pas16: WARNING: Can't use same irq as sound " | |
196 | "driver -- interrupts disabled\n" ); | |
197 | /* Set up the drive parameters, disable 5380 interrupts */ | |
198 | outb( 0x4d, io_port + SYS_CONFIG_4 ); | |
199 | } | |
200 | else | |
201 | { | |
202 | tmp = ( tmp & 0x0f ) | ( pas_irq_code << 4 ); | |
203 | outb( tmp, io_port + IO_CONFIG_3 ); | |
204 | ||
205 | /* Set up the drive parameters and enable 5380 interrupts */ | |
206 | outb( 0x6d, io_port + SYS_CONFIG_4 ); | |
207 | } | |
208 | } | |
209 | ||
210 | ||
211 | /* | |
212 | * Function : pas16_hw_detect( unsigned short board_num ) | |
213 | * | |
214 | * Purpose : determine if a pas16 board is present | |
215 | * | |
216 | * Inputs : board_num - logical board number ( 0 - 3 ) | |
217 | * | |
218 | * Returns : 0 if board not found, 1 if found. | |
219 | */ | |
220 | ||
221 | static int __init | |
222 | pas16_hw_detect( unsigned short board_num ) | |
223 | { | |
224 | unsigned char board_rev, tmp; | |
225 | unsigned short io_port = bases[ board_num ].io_port; | |
226 | ||
227 | /* See if we can find a PAS16 board at the address associated | |
228 | * with this logical board number. | |
229 | */ | |
230 | ||
231 | /* First, attempt to take a newer model board out of reset and | |
232 | * give it a base address. This shouldn't affect older boards. | |
233 | */ | |
234 | enable_board( board_num, io_port ); | |
235 | ||
236 | /* Now see if it looks like a PAS16 board */ | |
237 | board_rev = inb( io_port + PCB_CONFIG ); | |
238 | ||
239 | if( board_rev == 0xff ) | |
240 | return 0; | |
241 | ||
242 | tmp = board_rev ^ 0xe0; | |
243 | ||
244 | outb( tmp, io_port + PCB_CONFIG ); | |
245 | tmp = inb( io_port + PCB_CONFIG ); | |
246 | outb( board_rev, io_port + PCB_CONFIG ); | |
247 | ||
248 | if( board_rev != tmp ) /* Not a PAS-16 */ | |
249 | return 0; | |
250 | ||
251 | if( ( inb( io_port + OPERATION_MODE_1 ) & 0x03 ) != 0x03 ) | |
252 | return 0; /* return if no SCSI interface found */ | |
253 | ||
254 | /* Mediavision has some new model boards that return ID bits | |
255 | * that indicate a SCSI interface, but they're not (LMS). We'll | |
256 | * put in an additional test to try to weed them out. | |
257 | */ | |
258 | ||
54d8fe44 FT |
259 | outb(0x01, io_port + WAIT_STATE); /* 1 Wait state */ |
260 | outb(0x20, io_port + pas16_offset[MODE_REG]); /* Is it really SCSI? */ | |
261 | if (inb(io_port + pas16_offset[MODE_REG]) != 0x20) /* Write to a reg. */ | |
262 | return 0; /* and try to read */ | |
263 | outb(0x00, io_port + pas16_offset[MODE_REG]); /* it back. */ | |
264 | if (inb(io_port + pas16_offset[MODE_REG]) != 0x00) | |
265 | return 0; | |
1da177e4 LT |
266 | |
267 | return 1; | |
268 | } | |
269 | ||
270 | ||
925e4610 | 271 | #ifndef MODULE |
1da177e4 LT |
272 | /* |
273 | * Function : pas16_setup(char *str, int *ints) | |
274 | * | |
275 | * Purpose : LILO command line initialization of the overrides array, | |
276 | * | |
277 | * Inputs : str - unused, ints - array of integer parameters with ints[0] | |
278 | * equal to the number of ints. | |
279 | * | |
280 | */ | |
281 | ||
925e4610 | 282 | static int __init pas16_setup(char *str) |
1da177e4 | 283 | { |
d5f7e65d | 284 | static int commandline_current; |
1da177e4 | 285 | int i; |
925e4610 FT |
286 | int ints[10]; |
287 | ||
288 | get_options(str, ARRAY_SIZE(ints), ints); | |
1da177e4 LT |
289 | if (ints[0] != 2) |
290 | printk("pas16_setup : usage pas16=io_port,irq\n"); | |
291 | else | |
292 | if (commandline_current < NO_OVERRIDES) { | |
293 | overrides[commandline_current].io_port = (unsigned short) ints[1]; | |
294 | overrides[commandline_current].irq = ints[2]; | |
295 | for (i = 0; i < NO_BASES; ++i) | |
296 | if (bases[i].io_port == (unsigned short) ints[1]) { | |
297 | bases[i].noauto = 1; | |
298 | break; | |
299 | } | |
300 | ++commandline_current; | |
301 | } | |
925e4610 | 302 | return 1; |
1da177e4 LT |
303 | } |
304 | ||
925e4610 FT |
305 | __setup("pas16=", pas16_setup); |
306 | #endif | |
307 | ||
1da177e4 | 308 | /* |
d0be4a7d | 309 | * Function : int pas16_detect(struct scsi_host_template * tpnt) |
1da177e4 LT |
310 | * |
311 | * Purpose : detects and initializes PAS16 controllers | |
312 | * that were autoprobed, overridden on the LILO command line, | |
313 | * or specified at compile time. | |
314 | * | |
315 | * Inputs : tpnt - template for this SCSI adapter. | |
316 | * | |
317 | * Returns : 1 if a host adapter was found, 0 if not. | |
318 | * | |
319 | */ | |
320 | ||
ed8b9e7f | 321 | static int __init pas16_detect(struct scsi_host_template *tpnt) |
1da177e4 | 322 | { |
d5f7e65d FT |
323 | static int current_override; |
324 | static unsigned short current_base; | |
1da177e4 LT |
325 | struct Scsi_Host *instance; |
326 | unsigned short io_port; | |
327 | int count; | |
328 | ||
1da177e4 LT |
329 | if (pas16_addr != 0) { |
330 | overrides[0].io_port = pas16_addr; | |
331 | /* | |
332 | * This is how we avoid seeing more than | |
333 | * one host adapter at the same I/O port. | |
334 | * Cribbed shamelessly from pas16_setup(). | |
335 | */ | |
336 | for (count = 0; count < NO_BASES; ++count) | |
337 | if (bases[count].io_port == pas16_addr) { | |
338 | bases[count].noauto = 1; | |
339 | break; | |
340 | } | |
341 | } | |
342 | if (pas16_irq != 0) | |
343 | overrides[0].irq = pas16_irq; | |
344 | ||
345 | for (count = 0; current_override < NO_OVERRIDES; ++current_override) { | |
346 | io_port = 0; | |
347 | ||
348 | if (overrides[current_override].io_port) | |
349 | { | |
350 | io_port = overrides[current_override].io_port; | |
351 | enable_board( current_override, io_port ); | |
352 | init_board( io_port, overrides[current_override].irq, 1 ); | |
353 | } | |
354 | else | |
355 | for (; !io_port && (current_base < NO_BASES); ++current_base) { | |
2f7dba9f FT |
356 | dprintk(NDEBUG_INIT, "pas16: probing io_port 0x%04x\n", |
357 | (unsigned int)bases[current_base].io_port); | |
1da177e4 LT |
358 | if ( !bases[current_base].noauto && |
359 | pas16_hw_detect( current_base ) ){ | |
360 | io_port = bases[current_base].io_port; | |
361 | init_board( io_port, default_irqs[ current_base ], 0 ); | |
2f7dba9f | 362 | dprintk(NDEBUG_INIT, "pas16: detected board\n"); |
1da177e4 LT |
363 | } |
364 | } | |
365 | ||
2f7dba9f FT |
366 | dprintk(NDEBUG_INIT, "pas16: io_port = 0x%04x\n", |
367 | (unsigned int)io_port); | |
1da177e4 LT |
368 | |
369 | if (!io_port) | |
370 | break; | |
371 | ||
372 | instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata)); | |
373 | if(instance == NULL) | |
0ad0eff9 | 374 | goto out; |
1da177e4 LT |
375 | |
376 | instance->io_port = io_port; | |
377 | ||
1bb46002 | 378 | if (NCR5380_init(instance, FLAG_DMA_FIXUP)) |
0ad0eff9 | 379 | goto out_unregister; |
1da177e4 | 380 | |
b6488f97 FT |
381 | NCR5380_maybe_reset_bus(instance); |
382 | ||
1da177e4 LT |
383 | if (overrides[current_override].irq != IRQ_AUTO) |
384 | instance->irq = overrides[current_override].irq; | |
385 | else | |
386 | instance->irq = NCR5380_probe_irq(instance, PAS16_IRQS); | |
387 | ||
22f5f10d FT |
388 | /* Compatibility with documented NCR5380 kernel parameters */ |
389 | if (instance->irq == 255) | |
390 | instance->irq = NO_IRQ; | |
391 | ||
392 | if (instance->irq != NO_IRQ) | |
4909cc2b | 393 | if (request_irq(instance->irq, pas16_intr, 0, |
1e641664 | 394 | "pas16", instance)) { |
1da177e4 LT |
395 | printk("scsi%d : IRQ%d not free, interrupts disabled\n", |
396 | instance->host_no, instance->irq); | |
22f5f10d | 397 | instance->irq = NO_IRQ; |
1da177e4 LT |
398 | } |
399 | ||
22f5f10d | 400 | if (instance->irq == NO_IRQ) { |
1da177e4 LT |
401 | printk("scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no); |
402 | printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no); | |
403 | /* Disable 5380 interrupts, leave drive params the same */ | |
404 | outb( 0x4d, io_port + SYS_CONFIG_4 ); | |
405 | outb( (inb(io_port + IO_CONFIG_3) & 0x0f), io_port + IO_CONFIG_3 ); | |
406 | } | |
407 | ||
2f7dba9f FT |
408 | dprintk(NDEBUG_INIT, "scsi%d : irq = %d\n", |
409 | instance->host_no, instance->irq); | |
1da177e4 | 410 | |
1da177e4 LT |
411 | ++current_override; |
412 | ++count; | |
413 | } | |
414 | return count; | |
0ad0eff9 FT |
415 | |
416 | out_unregister: | |
417 | scsi_unregister(instance); | |
418 | out: | |
419 | return count; | |
1da177e4 LT |
420 | } |
421 | ||
422 | /* | |
423 | * Function : int pas16_biosparam(Disk *disk, struct block_device *dev, int *ip) | |
424 | * | |
425 | * Purpose : Generates a BIOS / DOS compatible H-C-S mapping for | |
426 | * the specified device / size. | |
427 | * | |
428 | * Inputs : size = size of device in sectors (512 bytes), dev = block device | |
429 | * major / minor, ip[] = {heads, sectors, cylinders} | |
430 | * | |
431 | * Returns : always 0 (success), initializes ip | |
432 | * | |
433 | */ | |
434 | ||
435 | /* | |
436 | * XXX Most SCSI boards use this mapping, I could be incorrect. Some one | |
437 | * using hard disks on a trantor should verify that this mapping corresponds | |
438 | * to that used by the BIOS / ASPI driver by running the linux fdisk program | |
439 | * and matching the H_C_S coordinates to what DOS uses. | |
440 | */ | |
441 | ||
ed8b9e7f FT |
442 | static int pas16_biosparam(struct scsi_device *sdev, struct block_device *dev, |
443 | sector_t capacity, int *ip) | |
1da177e4 LT |
444 | { |
445 | int size = capacity; | |
446 | ip[0] = 64; | |
447 | ip[1] = 32; | |
448 | ip[2] = size >> 11; /* I think I have it as /(32*64) */ | |
449 | if( ip[2] > 1024 ) { /* yes, >, not >= */ | |
450 | ip[0]=255; | |
451 | ip[1]=63; | |
452 | ip[2]=size/(63*255); | |
453 | if( ip[2] > 1023 ) /* yes >1023... */ | |
454 | ip[2] = 1023; | |
455 | } | |
456 | ||
457 | return 0; | |
458 | } | |
459 | ||
460 | /* | |
6c4b88ca | 461 | * Function : int pas16_pread (struct Scsi_Host *instance, |
1da177e4 LT |
462 | * unsigned char *dst, int len) |
463 | * | |
464 | * Purpose : Fast 5380 pseudo-dma read function, transfers len bytes to | |
465 | * dst | |
466 | * | |
467 | * Inputs : dst = destination, len = length in bytes | |
468 | * | |
469 | * Returns : 0 on success, non zero on a failure such as a watchdog | |
470 | * timeout. | |
471 | */ | |
472 | ||
6c4b88ca FT |
473 | static inline int pas16_pread(struct Scsi_Host *instance, |
474 | unsigned char *dst, int len) | |
475 | { | |
1da177e4 LT |
476 | register unsigned char *d = dst; |
477 | register unsigned short reg = (unsigned short) (instance->io_port + | |
478 | P_DATA_REG_OFFSET); | |
479 | register int i = len; | |
480 | int ii = 0; | |
481 | ||
482 | while ( !(inb(instance->io_port + P_STATUS_REG_OFFSET) & P_ST_RDY) ) | |
483 | ++ii; | |
484 | ||
485 | insb( reg, d, i ); | |
486 | ||
487 | if ( inb(instance->io_port + P_TIMEOUT_STATUS_REG_OFFSET) & P_TS_TIM) { | |
488 | outb( P_TS_CT, instance->io_port + P_TIMEOUT_STATUS_REG_OFFSET); | |
489 | printk("scsi%d : watchdog timer fired in NCR5380_pread()\n", | |
490 | instance->host_no); | |
491 | return -1; | |
492 | } | |
1da177e4 LT |
493 | return 0; |
494 | } | |
495 | ||
496 | /* | |
6c4b88ca | 497 | * Function : int pas16_pwrite (struct Scsi_Host *instance, |
1da177e4 LT |
498 | * unsigned char *src, int len) |
499 | * | |
500 | * Purpose : Fast 5380 pseudo-dma write function, transfers len bytes from | |
501 | * src | |
502 | * | |
503 | * Inputs : src = source, len = length in bytes | |
504 | * | |
505 | * Returns : 0 on success, non zero on a failure such as a watchdog | |
506 | * timeout. | |
507 | */ | |
508 | ||
6c4b88ca FT |
509 | static inline int pas16_pwrite(struct Scsi_Host *instance, |
510 | unsigned char *src, int len) | |
511 | { | |
1da177e4 LT |
512 | register unsigned char *s = src; |
513 | register unsigned short reg = (instance->io_port + P_DATA_REG_OFFSET); | |
514 | register int i = len; | |
515 | int ii = 0; | |
516 | ||
517 | while ( !((inb(instance->io_port + P_STATUS_REG_OFFSET)) & P_ST_RDY) ) | |
518 | ++ii; | |
519 | ||
520 | outsb( reg, s, i ); | |
521 | ||
522 | if (inb(instance->io_port + P_TIMEOUT_STATUS_REG_OFFSET) & P_TS_TIM) { | |
523 | outb( P_TS_CT, instance->io_port + P_TIMEOUT_STATUS_REG_OFFSET); | |
524 | printk("scsi%d : watchdog timer fired in NCR5380_pwrite()\n", | |
525 | instance->host_no); | |
526 | return -1; | |
527 | } | |
1da177e4 LT |
528 | return 0; |
529 | } | |
530 | ||
531 | #include "NCR5380.c" | |
532 | ||
533 | static int pas16_release(struct Scsi_Host *shost) | |
534 | { | |
22f5f10d | 535 | if (shost->irq != NO_IRQ) |
1e641664 | 536 | free_irq(shost->irq, shost); |
1da177e4 | 537 | NCR5380_exit(shost); |
1da177e4 LT |
538 | scsi_unregister(shost); |
539 | return 0; | |
540 | } | |
541 | ||
d0be4a7d | 542 | static struct scsi_host_template driver_template = { |
aa2e2cb1 FT |
543 | .name = "Pro Audio Spectrum-16 SCSI", |
544 | .detect = pas16_detect, | |
545 | .release = pas16_release, | |
546 | .proc_name = "pas16", | |
aa2e2cb1 FT |
547 | .info = pas16_info, |
548 | .queuecommand = pas16_queue_command, | |
549 | .eh_abort_handler = pas16_abort, | |
550 | .eh_bus_reset_handler = pas16_bus_reset, | |
551 | .bios_param = pas16_biosparam, | |
552 | .can_queue = 32, | |
553 | .this_id = 7, | |
554 | .sg_tablesize = SG_ALL, | |
555 | .cmd_per_lun = 2, | |
556 | .use_clustering = DISABLE_CLUSTERING, | |
32b26a10 | 557 | .cmd_size = NCR5380_CMD_SIZE, |
0a4e3612 | 558 | .max_sectors = 128, |
1da177e4 LT |
559 | }; |
560 | #include "scsi_module.c" | |
561 | ||
562 | #ifdef MODULE | |
563 | module_param(pas16_addr, ushort, 0); | |
564 | module_param(pas16_irq, int, 0); | |
565 | #endif | |
566 | MODULE_LICENSE("GPL"); |