Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* qlogicpti.c: Performance Technologies QlogicISP sbus card driver. |
2 | * | |
5dc2536b | 3 | * Copyright (C) 1996, 2006, 2008 David S. Miller (davem@davemloft.net) |
1da177e4 LT |
4 | * |
5 | * A lot of this driver was directly stolen from Erik H. Moe's PCI | |
6 | * Qlogic ISP driver. Mucho kudos to him for this code. | |
7 | * | |
8 | * An even bigger kudos to John Grana at Performance Technologies | |
9 | * for providing me with the hardware to write this driver, you rule | |
10 | * John you really do. | |
11 | * | |
12 | * May, 2, 1997: Added support for QLGC,isp --jj | |
13 | */ | |
14 | ||
15 | #include <linux/kernel.h> | |
16 | #include <linux/delay.h> | |
17 | #include <linux/types.h> | |
18 | #include <linux/string.h> | |
19 | #include <linux/slab.h> | |
20 | #include <linux/blkdev.h> | |
21 | #include <linux/proc_fs.h> | |
22 | #include <linux/stat.h> | |
23 | #include <linux/init.h> | |
24 | #include <linux/spinlock.h> | |
25 | #include <linux/interrupt.h> | |
26 | #include <linux/module.h> | |
60c904ae | 27 | #include <linux/jiffies.h> |
738f2b7b | 28 | #include <linux/dma-mapping.h> |
5dc2536b DM |
29 | #include <linux/of.h> |
30 | #include <linux/of_device.h> | |
f894e74d | 31 | #include <linux/firmware.h> |
1da177e4 LT |
32 | |
33 | #include <asm/byteorder.h> | |
34 | ||
35 | #include "qlogicpti.h" | |
36 | ||
1da177e4 LT |
37 | #include <asm/dma.h> |
38 | #include <asm/system.h> | |
39 | #include <asm/ptrace.h> | |
40 | #include <asm/pgtable.h> | |
41 | #include <asm/oplib.h> | |
42 | #include <asm/io.h> | |
43 | #include <asm/irq.h> | |
44 | ||
45 | #include <scsi/scsi.h> | |
46 | #include <scsi/scsi_cmnd.h> | |
47 | #include <scsi/scsi_device.h> | |
48 | #include <scsi/scsi_eh.h> | |
1da177e4 LT |
49 | #include <scsi/scsi_tcq.h> |
50 | #include <scsi/scsi_host.h> | |
51 | ||
1da177e4 LT |
52 | #define MAX_TARGETS 16 |
53 | #define MAX_LUNS 8 /* 32 for 1.31 F/W */ | |
54 | ||
55 | #define DEFAULT_LOOP_COUNT 10000 | |
56 | ||
1da177e4 LT |
57 | static struct qlogicpti *qptichain = NULL; |
58 | static DEFINE_SPINLOCK(qptichain_lock); | |
1da177e4 LT |
59 | |
60 | #define PACKB(a, b) (((a)<<4)|(b)) | |
61 | ||
62 | static const u_char mbox_param[] = { | |
63 | PACKB(1, 1), /* MBOX_NO_OP */ | |
64 | PACKB(5, 5), /* MBOX_LOAD_RAM */ | |
65 | PACKB(2, 0), /* MBOX_EXEC_FIRMWARE */ | |
66 | PACKB(5, 5), /* MBOX_DUMP_RAM */ | |
67 | PACKB(3, 3), /* MBOX_WRITE_RAM_WORD */ | |
68 | PACKB(2, 3), /* MBOX_READ_RAM_WORD */ | |
69 | PACKB(6, 6), /* MBOX_MAILBOX_REG_TEST */ | |
70 | PACKB(2, 3), /* MBOX_VERIFY_CHECKSUM */ | |
71 | PACKB(1, 3), /* MBOX_ABOUT_FIRMWARE */ | |
72 | PACKB(0, 0), /* 0x0009 */ | |
73 | PACKB(0, 0), /* 0x000a */ | |
74 | PACKB(0, 0), /* 0x000b */ | |
75 | PACKB(0, 0), /* 0x000c */ | |
76 | PACKB(0, 0), /* 0x000d */ | |
77 | PACKB(1, 2), /* MBOX_CHECK_FIRMWARE */ | |
78 | PACKB(0, 0), /* 0x000f */ | |
79 | PACKB(5, 5), /* MBOX_INIT_REQ_QUEUE */ | |
80 | PACKB(6, 6), /* MBOX_INIT_RES_QUEUE */ | |
81 | PACKB(4, 4), /* MBOX_EXECUTE_IOCB */ | |
82 | PACKB(2, 2), /* MBOX_WAKE_UP */ | |
83 | PACKB(1, 6), /* MBOX_STOP_FIRMWARE */ | |
84 | PACKB(4, 4), /* MBOX_ABORT */ | |
85 | PACKB(2, 2), /* MBOX_ABORT_DEVICE */ | |
86 | PACKB(3, 3), /* MBOX_ABORT_TARGET */ | |
87 | PACKB(2, 2), /* MBOX_BUS_RESET */ | |
88 | PACKB(2, 3), /* MBOX_STOP_QUEUE */ | |
89 | PACKB(2, 3), /* MBOX_START_QUEUE */ | |
90 | PACKB(2, 3), /* MBOX_SINGLE_STEP_QUEUE */ | |
91 | PACKB(2, 3), /* MBOX_ABORT_QUEUE */ | |
92 | PACKB(2, 4), /* MBOX_GET_DEV_QUEUE_STATUS */ | |
93 | PACKB(0, 0), /* 0x001e */ | |
94 | PACKB(1, 3), /* MBOX_GET_FIRMWARE_STATUS */ | |
95 | PACKB(1, 2), /* MBOX_GET_INIT_SCSI_ID */ | |
96 | PACKB(1, 2), /* MBOX_GET_SELECT_TIMEOUT */ | |
97 | PACKB(1, 3), /* MBOX_GET_RETRY_COUNT */ | |
98 | PACKB(1, 2), /* MBOX_GET_TAG_AGE_LIMIT */ | |
99 | PACKB(1, 2), /* MBOX_GET_CLOCK_RATE */ | |
100 | PACKB(1, 2), /* MBOX_GET_ACT_NEG_STATE */ | |
101 | PACKB(1, 2), /* MBOX_GET_ASYNC_DATA_SETUP_TIME */ | |
102 | PACKB(1, 3), /* MBOX_GET_SBUS_PARAMS */ | |
103 | PACKB(2, 4), /* MBOX_GET_TARGET_PARAMS */ | |
104 | PACKB(2, 4), /* MBOX_GET_DEV_QUEUE_PARAMS */ | |
105 | PACKB(0, 0), /* 0x002a */ | |
106 | PACKB(0, 0), /* 0x002b */ | |
107 | PACKB(0, 0), /* 0x002c */ | |
108 | PACKB(0, 0), /* 0x002d */ | |
109 | PACKB(0, 0), /* 0x002e */ | |
110 | PACKB(0, 0), /* 0x002f */ | |
111 | PACKB(2, 2), /* MBOX_SET_INIT_SCSI_ID */ | |
112 | PACKB(2, 2), /* MBOX_SET_SELECT_TIMEOUT */ | |
113 | PACKB(3, 3), /* MBOX_SET_RETRY_COUNT */ | |
114 | PACKB(2, 2), /* MBOX_SET_TAG_AGE_LIMIT */ | |
115 | PACKB(2, 2), /* MBOX_SET_CLOCK_RATE */ | |
116 | PACKB(2, 2), /* MBOX_SET_ACTIVE_NEG_STATE */ | |
117 | PACKB(2, 2), /* MBOX_SET_ASYNC_DATA_SETUP_TIME */ | |
118 | PACKB(3, 3), /* MBOX_SET_SBUS_CONTROL_PARAMS */ | |
119 | PACKB(4, 4), /* MBOX_SET_TARGET_PARAMS */ | |
120 | PACKB(4, 4), /* MBOX_SET_DEV_QUEUE_PARAMS */ | |
121 | PACKB(0, 0), /* 0x003a */ | |
122 | PACKB(0, 0), /* 0x003b */ | |
123 | PACKB(0, 0), /* 0x003c */ | |
124 | PACKB(0, 0), /* 0x003d */ | |
125 | PACKB(0, 0), /* 0x003e */ | |
126 | PACKB(0, 0), /* 0x003f */ | |
127 | PACKB(0, 0), /* 0x0040 */ | |
128 | PACKB(0, 0), /* 0x0041 */ | |
129 | PACKB(0, 0) /* 0x0042 */ | |
130 | }; | |
131 | ||
6391a113 | 132 | #define MAX_MBOX_COMMAND ARRAY_SIZE(mbox_param) |
1da177e4 LT |
133 | |
134 | /* queue length's _must_ be power of two: */ | |
135 | #define QUEUE_DEPTH(in, out, ql) ((in - out) & (ql)) | |
136 | #define REQ_QUEUE_DEPTH(in, out) QUEUE_DEPTH(in, out, \ | |
137 | QLOGICPTI_REQ_QUEUE_LEN) | |
138 | #define RES_QUEUE_DEPTH(in, out) QUEUE_DEPTH(in, out, RES_QUEUE_LEN) | |
139 | ||
140 | static inline void qlogicpti_enable_irqs(struct qlogicpti *qpti) | |
141 | { | |
142 | sbus_writew(SBUS_CTRL_ERIRQ | SBUS_CTRL_GENAB, | |
143 | qpti->qregs + SBUS_CTRL); | |
144 | } | |
145 | ||
146 | static inline void qlogicpti_disable_irqs(struct qlogicpti *qpti) | |
147 | { | |
148 | sbus_writew(0, qpti->qregs + SBUS_CTRL); | |
149 | } | |
150 | ||
151 | static inline void set_sbus_cfg1(struct qlogicpti *qpti) | |
152 | { | |
153 | u16 val; | |
154 | u8 bursts = qpti->bursts; | |
155 | ||
156 | #if 0 /* It appears that at least PTI cards do not support | |
157 | * 64-byte bursts and that setting the B64 bit actually | |
158 | * is a nop and the chip ends up using the smallest burst | |
159 | * size. -DaveM | |
160 | */ | |
63237eeb | 161 | if (sbus_can_burst64() && (bursts & DMA_BURST64)) { |
1da177e4 LT |
162 | val = (SBUS_CFG1_BENAB | SBUS_CFG1_B64); |
163 | } else | |
164 | #endif | |
165 | if (bursts & DMA_BURST32) { | |
166 | val = (SBUS_CFG1_BENAB | SBUS_CFG1_B32); | |
167 | } else if (bursts & DMA_BURST16) { | |
168 | val = (SBUS_CFG1_BENAB | SBUS_CFG1_B16); | |
169 | } else if (bursts & DMA_BURST8) { | |
170 | val = (SBUS_CFG1_BENAB | SBUS_CFG1_B8); | |
171 | } else { | |
172 | val = 0; /* No sbus bursts for you... */ | |
173 | } | |
174 | sbus_writew(val, qpti->qregs + SBUS_CFG1); | |
175 | } | |
176 | ||
177 | static int qlogicpti_mbox_command(struct qlogicpti *qpti, u_short param[], int force) | |
178 | { | |
179 | int loop_count; | |
180 | u16 tmp; | |
181 | ||
182 | if (mbox_param[param[0]] == 0) | |
183 | return 1; | |
184 | ||
185 | /* Set SBUS semaphore. */ | |
186 | tmp = sbus_readw(qpti->qregs + SBUS_SEMAPHORE); | |
187 | tmp |= SBUS_SEMAPHORE_LCK; | |
188 | sbus_writew(tmp, qpti->qregs + SBUS_SEMAPHORE); | |
189 | ||
190 | /* Wait for host IRQ bit to clear. */ | |
191 | loop_count = DEFAULT_LOOP_COUNT; | |
192 | while (--loop_count && (sbus_readw(qpti->qregs + HCCTRL) & HCCTRL_HIRQ)) { | |
193 | barrier(); | |
194 | cpu_relax(); | |
195 | } | |
196 | if (!loop_count) | |
585a8a59 MF |
197 | printk(KERN_EMERG "qlogicpti%d: mbox_command loop timeout #1\n", |
198 | qpti->qpti_id); | |
1da177e4 LT |
199 | |
200 | /* Write mailbox command registers. */ | |
201 | switch (mbox_param[param[0]] >> 4) { | |
202 | case 6: sbus_writew(param[5], qpti->qregs + MBOX5); | |
203 | case 5: sbus_writew(param[4], qpti->qregs + MBOX4); | |
204 | case 4: sbus_writew(param[3], qpti->qregs + MBOX3); | |
205 | case 3: sbus_writew(param[2], qpti->qregs + MBOX2); | |
206 | case 2: sbus_writew(param[1], qpti->qregs + MBOX1); | |
207 | case 1: sbus_writew(param[0], qpti->qregs + MBOX0); | |
208 | } | |
209 | ||
210 | /* Clear RISC interrupt. */ | |
211 | tmp = sbus_readw(qpti->qregs + HCCTRL); | |
212 | tmp |= HCCTRL_CRIRQ; | |
213 | sbus_writew(tmp, qpti->qregs + HCCTRL); | |
214 | ||
215 | /* Clear SBUS semaphore. */ | |
216 | sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE); | |
217 | ||
218 | /* Set HOST interrupt. */ | |
219 | tmp = sbus_readw(qpti->qregs + HCCTRL); | |
220 | tmp |= HCCTRL_SHIRQ; | |
221 | sbus_writew(tmp, qpti->qregs + HCCTRL); | |
222 | ||
223 | /* Wait for HOST interrupt clears. */ | |
224 | loop_count = DEFAULT_LOOP_COUNT; | |
225 | while (--loop_count && | |
226 | (sbus_readw(qpti->qregs + HCCTRL) & HCCTRL_CRIRQ)) | |
227 | udelay(20); | |
228 | if (!loop_count) | |
585a8a59 MF |
229 | printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #2\n", |
230 | qpti->qpti_id, param[0]); | |
1da177e4 LT |
231 | |
232 | /* Wait for SBUS semaphore to get set. */ | |
233 | loop_count = DEFAULT_LOOP_COUNT; | |
234 | while (--loop_count && | |
235 | !(sbus_readw(qpti->qregs + SBUS_SEMAPHORE) & SBUS_SEMAPHORE_LCK)) { | |
236 | udelay(20); | |
237 | ||
238 | /* Workaround for some buggy chips. */ | |
239 | if (sbus_readw(qpti->qregs + MBOX0) & 0x4000) | |
240 | break; | |
241 | } | |
242 | if (!loop_count) | |
585a8a59 MF |
243 | printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #3\n", |
244 | qpti->qpti_id, param[0]); | |
1da177e4 LT |
245 | |
246 | /* Wait for MBOX busy condition to go away. */ | |
247 | loop_count = DEFAULT_LOOP_COUNT; | |
248 | while (--loop_count && (sbus_readw(qpti->qregs + MBOX0) == 0x04)) | |
249 | udelay(20); | |
250 | if (!loop_count) | |
585a8a59 MF |
251 | printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #4\n", |
252 | qpti->qpti_id, param[0]); | |
1da177e4 LT |
253 | |
254 | /* Read back output parameters. */ | |
255 | switch (mbox_param[param[0]] & 0xf) { | |
256 | case 6: param[5] = sbus_readw(qpti->qregs + MBOX5); | |
257 | case 5: param[4] = sbus_readw(qpti->qregs + MBOX4); | |
258 | case 4: param[3] = sbus_readw(qpti->qregs + MBOX3); | |
259 | case 3: param[2] = sbus_readw(qpti->qregs + MBOX2); | |
260 | case 2: param[1] = sbus_readw(qpti->qregs + MBOX1); | |
261 | case 1: param[0] = sbus_readw(qpti->qregs + MBOX0); | |
262 | } | |
263 | ||
264 | /* Clear RISC interrupt. */ | |
265 | tmp = sbus_readw(qpti->qregs + HCCTRL); | |
266 | tmp |= HCCTRL_CRIRQ; | |
267 | sbus_writew(tmp, qpti->qregs + HCCTRL); | |
268 | ||
269 | /* Release SBUS semaphore. */ | |
270 | tmp = sbus_readw(qpti->qregs + SBUS_SEMAPHORE); | |
271 | tmp &= ~(SBUS_SEMAPHORE_LCK); | |
272 | sbus_writew(tmp, qpti->qregs + SBUS_SEMAPHORE); | |
273 | ||
274 | /* We're done. */ | |
275 | return 0; | |
276 | } | |
277 | ||
278 | static inline void qlogicpti_set_hostdev_defaults(struct qlogicpti *qpti) | |
279 | { | |
280 | int i; | |
281 | ||
282 | qpti->host_param.initiator_scsi_id = qpti->scsi_id; | |
283 | qpti->host_param.bus_reset_delay = 3; | |
284 | qpti->host_param.retry_count = 0; | |
285 | qpti->host_param.retry_delay = 5; | |
286 | qpti->host_param.async_data_setup_time = 3; | |
287 | qpti->host_param.req_ack_active_negation = 1; | |
288 | qpti->host_param.data_line_active_negation = 1; | |
289 | qpti->host_param.data_dma_burst_enable = 1; | |
290 | qpti->host_param.command_dma_burst_enable = 1; | |
291 | qpti->host_param.tag_aging = 8; | |
292 | qpti->host_param.selection_timeout = 250; | |
293 | qpti->host_param.max_queue_depth = 256; | |
294 | ||
295 | for(i = 0; i < MAX_TARGETS; i++) { | |
296 | /* | |
297 | * disconnect, parity, arq, reneg on reset, and, oddly enough | |
298 | * tags...the midlayer's notion of tagged support has to match | |
299 | * our device settings, and since we base whether we enable a | |
300 | * tag on a per-cmnd basis upon what the midlayer sez, we | |
301 | * actually enable the capability here. | |
302 | */ | |
303 | qpti->dev_param[i].device_flags = 0xcd; | |
304 | qpti->dev_param[i].execution_throttle = 16; | |
305 | if (qpti->ultra) { | |
306 | qpti->dev_param[i].synchronous_period = 12; | |
307 | qpti->dev_param[i].synchronous_offset = 8; | |
308 | } else { | |
309 | qpti->dev_param[i].synchronous_period = 25; | |
310 | qpti->dev_param[i].synchronous_offset = 12; | |
311 | } | |
312 | qpti->dev_param[i].device_enable = 1; | |
313 | } | |
1da177e4 LT |
314 | } |
315 | ||
316 | static int qlogicpti_reset_hardware(struct Scsi_Host *host) | |
317 | { | |
318 | struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata; | |
319 | u_short param[6]; | |
320 | unsigned short risc_code_addr; | |
321 | int loop_count, i; | |
322 | unsigned long flags; | |
323 | ||
324 | risc_code_addr = 0x1000; /* all load addresses are at 0x1000 */ | |
325 | ||
326 | spin_lock_irqsave(host->host_lock, flags); | |
327 | ||
328 | sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL); | |
329 | ||
330 | /* Only reset the scsi bus if it is not free. */ | |
331 | if (sbus_readw(qpti->qregs + CPU_PCTRL) & CPU_PCTRL_BSY) { | |
332 | sbus_writew(CPU_ORIDE_RMOD, qpti->qregs + CPU_ORIDE); | |
333 | sbus_writew(CPU_CMD_BRESET, qpti->qregs + CPU_CMD); | |
334 | udelay(400); | |
335 | } | |
336 | ||
337 | sbus_writew(SBUS_CTRL_RESET, qpti->qregs + SBUS_CTRL); | |
338 | sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + CMD_DMA_CTRL); | |
339 | sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + DATA_DMA_CTRL); | |
340 | ||
341 | loop_count = DEFAULT_LOOP_COUNT; | |
342 | while (--loop_count && ((sbus_readw(qpti->qregs + MBOX0) & 0xff) == 0x04)) | |
343 | udelay(20); | |
344 | if (!loop_count) | |
585a8a59 MF |
345 | printk(KERN_EMERG "qlogicpti%d: reset_hardware loop timeout\n", |
346 | qpti->qpti_id); | |
1da177e4 LT |
347 | |
348 | sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL); | |
349 | set_sbus_cfg1(qpti); | |
350 | qlogicpti_enable_irqs(qpti); | |
351 | ||
352 | if (sbus_readw(qpti->qregs + RISC_PSR) & RISC_PSR_ULTRA) { | |
353 | qpti->ultra = 1; | |
354 | sbus_writew((RISC_MTREG_P0ULTRA | RISC_MTREG_P1ULTRA), | |
355 | qpti->qregs + RISC_MTREG); | |
356 | } else { | |
357 | qpti->ultra = 0; | |
358 | sbus_writew((RISC_MTREG_P0DFLT | RISC_MTREG_P1DFLT), | |
359 | qpti->qregs + RISC_MTREG); | |
360 | } | |
361 | ||
362 | /* reset adapter and per-device default values. */ | |
363 | /* do it after finding out whether we're ultra mode capable */ | |
364 | qlogicpti_set_hostdev_defaults(qpti); | |
365 | ||
366 | /* Release the RISC processor. */ | |
367 | sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL); | |
368 | ||
369 | /* Get RISC to start executing the firmware code. */ | |
370 | param[0] = MBOX_EXEC_FIRMWARE; | |
371 | param[1] = risc_code_addr; | |
372 | if (qlogicpti_mbox_command(qpti, param, 1)) { | |
373 | printk(KERN_EMERG "qlogicpti%d: Cannot execute ISP firmware.\n", | |
374 | qpti->qpti_id); | |
375 | spin_unlock_irqrestore(host->host_lock, flags); | |
376 | return 1; | |
377 | } | |
378 | ||
379 | /* Set initiator scsi ID. */ | |
380 | param[0] = MBOX_SET_INIT_SCSI_ID; | |
381 | param[1] = qpti->host_param.initiator_scsi_id; | |
382 | if (qlogicpti_mbox_command(qpti, param, 1) || | |
383 | (param[0] != MBOX_COMMAND_COMPLETE)) { | |
384 | printk(KERN_EMERG "qlogicpti%d: Cannot set initiator SCSI ID.\n", | |
385 | qpti->qpti_id); | |
386 | spin_unlock_irqrestore(host->host_lock, flags); | |
387 | return 1; | |
388 | } | |
389 | ||
390 | /* Initialize state of the queues, both hw and sw. */ | |
391 | qpti->req_in_ptr = qpti->res_out_ptr = 0; | |
392 | ||
393 | param[0] = MBOX_INIT_RES_QUEUE; | |
394 | param[1] = RES_QUEUE_LEN + 1; | |
395 | param[2] = (u_short) (qpti->res_dvma >> 16); | |
396 | param[3] = (u_short) (qpti->res_dvma & 0xffff); | |
397 | param[4] = param[5] = 0; | |
398 | if (qlogicpti_mbox_command(qpti, param, 1)) { | |
399 | printk(KERN_EMERG "qlogicpti%d: Cannot init response queue.\n", | |
400 | qpti->qpti_id); | |
401 | spin_unlock_irqrestore(host->host_lock, flags); | |
402 | return 1; | |
403 | } | |
404 | ||
405 | param[0] = MBOX_INIT_REQ_QUEUE; | |
406 | param[1] = QLOGICPTI_REQ_QUEUE_LEN + 1; | |
407 | param[2] = (u_short) (qpti->req_dvma >> 16); | |
408 | param[3] = (u_short) (qpti->req_dvma & 0xffff); | |
409 | param[4] = param[5] = 0; | |
410 | if (qlogicpti_mbox_command(qpti, param, 1)) { | |
411 | printk(KERN_EMERG "qlogicpti%d: Cannot init request queue.\n", | |
412 | qpti->qpti_id); | |
413 | spin_unlock_irqrestore(host->host_lock, flags); | |
414 | return 1; | |
415 | } | |
416 | ||
417 | param[0] = MBOX_SET_RETRY_COUNT; | |
418 | param[1] = qpti->host_param.retry_count; | |
419 | param[2] = qpti->host_param.retry_delay; | |
420 | qlogicpti_mbox_command(qpti, param, 0); | |
421 | ||
422 | param[0] = MBOX_SET_TAG_AGE_LIMIT; | |
423 | param[1] = qpti->host_param.tag_aging; | |
424 | qlogicpti_mbox_command(qpti, param, 0); | |
425 | ||
426 | for (i = 0; i < MAX_TARGETS; i++) { | |
427 | param[0] = MBOX_GET_DEV_QUEUE_PARAMS; | |
428 | param[1] = (i << 8); | |
429 | qlogicpti_mbox_command(qpti, param, 0); | |
430 | } | |
431 | ||
432 | param[0] = MBOX_GET_FIRMWARE_STATUS; | |
433 | qlogicpti_mbox_command(qpti, param, 0); | |
434 | ||
435 | param[0] = MBOX_SET_SELECT_TIMEOUT; | |
436 | param[1] = qpti->host_param.selection_timeout; | |
437 | qlogicpti_mbox_command(qpti, param, 0); | |
438 | ||
439 | for (i = 0; i < MAX_TARGETS; i++) { | |
440 | param[0] = MBOX_SET_TARGET_PARAMS; | |
441 | param[1] = (i << 8); | |
442 | param[2] = (qpti->dev_param[i].device_flags << 8); | |
443 | /* | |
444 | * Since we're now loading 1.31 f/w, force narrow/async. | |
445 | */ | |
446 | param[2] |= 0xc0; | |
447 | param[3] = 0; /* no offset, we do not have sync mode yet */ | |
448 | qlogicpti_mbox_command(qpti, param, 0); | |
449 | } | |
450 | ||
451 | /* | |
452 | * Always (sigh) do an initial bus reset (kicks f/w). | |
453 | */ | |
454 | param[0] = MBOX_BUS_RESET; | |
455 | param[1] = qpti->host_param.bus_reset_delay; | |
456 | qlogicpti_mbox_command(qpti, param, 0); | |
457 | qpti->send_marker = 1; | |
458 | ||
459 | spin_unlock_irqrestore(host->host_lock, flags); | |
460 | return 0; | |
461 | } | |
462 | ||
463 | #define PTI_RESET_LIMIT 400 | |
464 | ||
b48194bf | 465 | static int __devinit qlogicpti_load_firmware(struct qlogicpti *qpti) |
1da177e4 | 466 | { |
f894e74d JSR |
467 | const struct firmware *fw; |
468 | const char fwname[] = "qlogic/isp1000.bin"; | |
469 | const __le16 *fw_data; | |
1da177e4 LT |
470 | struct Scsi_Host *host = qpti->qhost; |
471 | unsigned short csum = 0; | |
472 | unsigned short param[6]; | |
f894e74d JSR |
473 | unsigned short risc_code_addr, risc_code_length; |
474 | int err; | |
1da177e4 LT |
475 | unsigned long flags; |
476 | int i, timeout; | |
477 | ||
f894e74d JSR |
478 | err = request_firmware(&fw, fwname, &qpti->op->dev); |
479 | if (err) { | |
480 | printk(KERN_ERR "Failed to load image \"%s\" err %d\n", | |
481 | fwname, err); | |
482 | return err; | |
483 | } | |
484 | if (fw->size % 2) { | |
485 | printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", | |
486 | fw->size, fwname); | |
487 | err = -EINVAL; | |
488 | goto outfirm; | |
489 | } | |
490 | fw_data = (const __le16 *)&fw->data[0]; | |
1da177e4 | 491 | risc_code_addr = 0x1000; /* all f/w modules load at 0x1000 */ |
f894e74d | 492 | risc_code_length = fw->size / 2; |
1da177e4 LT |
493 | |
494 | spin_lock_irqsave(host->host_lock, flags); | |
495 | ||
496 | /* Verify the checksum twice, one before loading it, and once | |
497 | * afterwards via the mailbox commands. | |
498 | */ | |
499 | for (i = 0; i < risc_code_length; i++) | |
f894e74d | 500 | csum += __le16_to_cpu(fw_data[i]); |
1da177e4 | 501 | if (csum) { |
1da177e4 LT |
502 | printk(KERN_EMERG "qlogicpti%d: Aieee, firmware checksum failed!", |
503 | qpti->qpti_id); | |
f894e74d JSR |
504 | err = 1; |
505 | goto out; | |
1da177e4 LT |
506 | } |
507 | sbus_writew(SBUS_CTRL_RESET, qpti->qregs + SBUS_CTRL); | |
508 | sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + CMD_DMA_CTRL); | |
509 | sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + DATA_DMA_CTRL); | |
510 | timeout = PTI_RESET_LIMIT; | |
511 | while (--timeout && (sbus_readw(qpti->qregs + SBUS_CTRL) & SBUS_CTRL_RESET)) | |
512 | udelay(20); | |
513 | if (!timeout) { | |
1da177e4 | 514 | printk(KERN_EMERG "qlogicpti%d: Cannot reset the ISP.", qpti->qpti_id); |
f894e74d JSR |
515 | err = 1; |
516 | goto out; | |
1da177e4 LT |
517 | } |
518 | ||
519 | sbus_writew(HCCTRL_RESET, qpti->qregs + HCCTRL); | |
520 | mdelay(1); | |
521 | ||
522 | sbus_writew((SBUS_CTRL_GENAB | SBUS_CTRL_ERIRQ), qpti->qregs + SBUS_CTRL); | |
523 | set_sbus_cfg1(qpti); | |
524 | sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE); | |
525 | ||
526 | if (sbus_readw(qpti->qregs + RISC_PSR) & RISC_PSR_ULTRA) { | |
527 | qpti->ultra = 1; | |
528 | sbus_writew((RISC_MTREG_P0ULTRA | RISC_MTREG_P1ULTRA), | |
529 | qpti->qregs + RISC_MTREG); | |
530 | } else { | |
531 | qpti->ultra = 0; | |
532 | sbus_writew((RISC_MTREG_P0DFLT | RISC_MTREG_P1DFLT), | |
533 | qpti->qregs + RISC_MTREG); | |
534 | } | |
535 | ||
536 | sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL); | |
537 | ||
538 | /* Pin lines are only stable while RISC is paused. */ | |
539 | sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL); | |
540 | if (sbus_readw(qpti->qregs + CPU_PDIFF) & CPU_PDIFF_MODE) | |
541 | qpti->differential = 1; | |
542 | else | |
543 | qpti->differential = 0; | |
544 | sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL); | |
545 | ||
546 | /* This shouldn't be necessary- we've reset things so we should be | |
547 | running from the ROM now.. */ | |
548 | ||
549 | param[0] = MBOX_STOP_FIRMWARE; | |
550 | param[1] = param[2] = param[3] = param[4] = param[5] = 0; | |
551 | if (qlogicpti_mbox_command(qpti, param, 1)) { | |
552 | printk(KERN_EMERG "qlogicpti%d: Cannot stop firmware for reload.\n", | |
553 | qpti->qpti_id); | |
f894e74d JSR |
554 | err = 1; |
555 | goto out; | |
1da177e4 LT |
556 | } |
557 | ||
558 | /* Load it up.. */ | |
559 | for (i = 0; i < risc_code_length; i++) { | |
560 | param[0] = MBOX_WRITE_RAM_WORD; | |
561 | param[1] = risc_code_addr + i; | |
f894e74d | 562 | param[2] = __le16_to_cpu(fw_data[i]); |
1da177e4 LT |
563 | if (qlogicpti_mbox_command(qpti, param, 1) || |
564 | param[0] != MBOX_COMMAND_COMPLETE) { | |
565 | printk("qlogicpti%d: Firmware dload failed, I'm bolixed!\n", | |
566 | qpti->qpti_id); | |
f894e74d JSR |
567 | err = 1; |
568 | goto out; | |
1da177e4 LT |
569 | } |
570 | } | |
571 | ||
572 | /* Reset the ISP again. */ | |
573 | sbus_writew(HCCTRL_RESET, qpti->qregs + HCCTRL); | |
574 | mdelay(1); | |
575 | ||
576 | qlogicpti_enable_irqs(qpti); | |
577 | sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE); | |
578 | sbus_writew(HCCTRL_REL, qpti->qregs + HCCTRL); | |
579 | ||
580 | /* Ask ISP to verify the checksum of the new code. */ | |
581 | param[0] = MBOX_VERIFY_CHECKSUM; | |
582 | param[1] = risc_code_addr; | |
583 | if (qlogicpti_mbox_command(qpti, param, 1) || | |
584 | (param[0] != MBOX_COMMAND_COMPLETE)) { | |
585 | printk(KERN_EMERG "qlogicpti%d: New firmware csum failure!\n", | |
586 | qpti->qpti_id); | |
f894e74d JSR |
587 | err = 1; |
588 | goto out; | |
1da177e4 LT |
589 | } |
590 | ||
591 | /* Start using newly downloaded firmware. */ | |
592 | param[0] = MBOX_EXEC_FIRMWARE; | |
593 | param[1] = risc_code_addr; | |
594 | qlogicpti_mbox_command(qpti, param, 1); | |
595 | ||
596 | param[0] = MBOX_ABOUT_FIRMWARE; | |
597 | if (qlogicpti_mbox_command(qpti, param, 1) || | |
598 | (param[0] != MBOX_COMMAND_COMPLETE)) { | |
599 | printk(KERN_EMERG "qlogicpti%d: AboutFirmware cmd fails.\n", | |
600 | qpti->qpti_id); | |
f894e74d JSR |
601 | err = 1; |
602 | goto out; | |
1da177e4 LT |
603 | } |
604 | ||
605 | /* Snag the major and minor revisions from the result. */ | |
606 | qpti->fware_majrev = param[1]; | |
607 | qpti->fware_minrev = param[2]; | |
608 | qpti->fware_micrev = param[3]; | |
609 | ||
610 | /* Set the clock rate */ | |
611 | param[0] = MBOX_SET_CLOCK_RATE; | |
612 | param[1] = qpti->clock; | |
613 | if (qlogicpti_mbox_command(qpti, param, 1) || | |
614 | (param[0] != MBOX_COMMAND_COMPLETE)) { | |
615 | printk(KERN_EMERG "qlogicpti%d: could not set clock rate.\n", | |
616 | qpti->qpti_id); | |
f894e74d JSR |
617 | err = 1; |
618 | goto out; | |
1da177e4 LT |
619 | } |
620 | ||
621 | if (qpti->is_pti != 0) { | |
622 | /* Load scsi initiator ID and interrupt level into sbus static ram. */ | |
623 | param[0] = MBOX_WRITE_RAM_WORD; | |
624 | param[1] = 0xff80; | |
625 | param[2] = (unsigned short) qpti->scsi_id; | |
626 | qlogicpti_mbox_command(qpti, param, 1); | |
627 | ||
628 | param[0] = MBOX_WRITE_RAM_WORD; | |
629 | param[1] = 0xff00; | |
630 | param[2] = (unsigned short) 3; | |
631 | qlogicpti_mbox_command(qpti, param, 1); | |
632 | } | |
633 | ||
f894e74d | 634 | out: |
1da177e4 | 635 | spin_unlock_irqrestore(host->host_lock, flags); |
f894e74d JSR |
636 | outfirm: |
637 | release_firmware(fw); | |
638 | return err; | |
1da177e4 LT |
639 | } |
640 | ||
641 | static int qlogicpti_verify_tmon(struct qlogicpti *qpti) | |
642 | { | |
643 | int curstat = sbus_readb(qpti->sreg); | |
644 | ||
645 | curstat &= 0xf0; | |
646 | if (!(curstat & SREG_FUSE) && (qpti->swsreg & SREG_FUSE)) | |
647 | printk("qlogicpti%d: Fuse returned to normal state.\n", qpti->qpti_id); | |
648 | if (!(curstat & SREG_TPOWER) && (qpti->swsreg & SREG_TPOWER)) | |
649 | printk("qlogicpti%d: termpwr back to normal state.\n", qpti->qpti_id); | |
650 | if (curstat != qpti->swsreg) { | |
651 | int error = 0; | |
652 | if (curstat & SREG_FUSE) { | |
653 | error++; | |
654 | printk("qlogicpti%d: Fuse is open!\n", qpti->qpti_id); | |
655 | } | |
656 | if (curstat & SREG_TPOWER) { | |
657 | error++; | |
658 | printk("qlogicpti%d: termpwr failure\n", qpti->qpti_id); | |
659 | } | |
660 | if (qpti->differential && | |
661 | (curstat & SREG_DSENSE) != SREG_DSENSE) { | |
662 | error++; | |
663 | printk("qlogicpti%d: You have a single ended device on a " | |
664 | "differential bus! Please fix!\n", qpti->qpti_id); | |
665 | } | |
666 | qpti->swsreg = curstat; | |
667 | return error; | |
668 | } | |
669 | return 0; | |
670 | } | |
671 | ||
7d12e780 | 672 | static irqreturn_t qpti_intr(int irq, void *dev_id); |
1da177e4 | 673 | |
cfb37ae1 | 674 | static void __devinit qpti_chain_add(struct qlogicpti *qpti) |
1da177e4 LT |
675 | { |
676 | spin_lock_irq(&qptichain_lock); | |
677 | if (qptichain != NULL) { | |
678 | struct qlogicpti *qlink = qptichain; | |
679 | ||
680 | while(qlink->next) | |
681 | qlink = qlink->next; | |
682 | qlink->next = qpti; | |
683 | } else { | |
684 | qptichain = qpti; | |
685 | } | |
686 | qpti->next = NULL; | |
687 | spin_unlock_irq(&qptichain_lock); | |
688 | } | |
689 | ||
cfb37ae1 | 690 | static void __devexit qpti_chain_del(struct qlogicpti *qpti) |
1da177e4 LT |
691 | { |
692 | spin_lock_irq(&qptichain_lock); | |
693 | if (qptichain == qpti) { | |
694 | qptichain = qpti->next; | |
695 | } else { | |
696 | struct qlogicpti *qlink = qptichain; | |
697 | while(qlink->next != qpti) | |
698 | qlink = qlink->next; | |
699 | qlink->next = qpti->next; | |
700 | } | |
701 | qpti->next = NULL; | |
702 | spin_unlock_irq(&qptichain_lock); | |
703 | } | |
704 | ||
cfb37ae1 | 705 | static int __devinit qpti_map_regs(struct qlogicpti *qpti) |
1da177e4 | 706 | { |
5dc2536b | 707 | struct of_device *op = qpti->op; |
1da177e4 | 708 | |
5dc2536b DM |
709 | qpti->qregs = of_ioremap(&op->resource[0], 0, |
710 | resource_size(&op->resource[0]), | |
711 | "PTI Qlogic/ISP"); | |
1da177e4 LT |
712 | if (!qpti->qregs) { |
713 | printk("PTI: Qlogic/ISP registers are unmappable\n"); | |
714 | return -1; | |
715 | } | |
716 | if (qpti->is_pti) { | |
5dc2536b DM |
717 | qpti->sreg = of_ioremap(&op->resource[0], (16 * 4096), |
718 | sizeof(unsigned char), | |
719 | "PTI Qlogic/ISP statreg"); | |
1da177e4 LT |
720 | if (!qpti->sreg) { |
721 | printk("PTI: Qlogic/ISP status register is unmappable\n"); | |
722 | return -1; | |
723 | } | |
724 | } | |
725 | return 0; | |
726 | } | |
727 | ||
cfb37ae1 | 728 | static int __devinit qpti_register_irq(struct qlogicpti *qpti) |
1da177e4 | 729 | { |
5dc2536b | 730 | struct of_device *op = qpti->op; |
1da177e4 | 731 | |
5dc2536b | 732 | qpti->qhost->irq = qpti->irq = op->irqs[0]; |
1da177e4 LT |
733 | |
734 | /* We used to try various overly-clever things to | |
735 | * reduce the interrupt processing overhead on | |
736 | * sun4c/sun4m when multiple PTI's shared the | |
737 | * same IRQ. It was too complex and messy to | |
738 | * sanely maintain. | |
739 | */ | |
740 | if (request_irq(qpti->irq, qpti_intr, | |
1d6f359a | 741 | IRQF_SHARED, "Qlogic/PTI", qpti)) |
1da177e4 LT |
742 | goto fail; |
743 | ||
585a8a59 | 744 | printk("qlogicpti%d: IRQ %d ", qpti->qpti_id, qpti->irq); |
1da177e4 LT |
745 | |
746 | return 0; | |
747 | ||
748 | fail: | |
585a8a59 | 749 | printk("qlogicpti%d: Cannot acquire irq line\n", qpti->qpti_id); |
1da177e4 LT |
750 | return -1; |
751 | } | |
752 | ||
cfb37ae1 | 753 | static void __devinit qpti_get_scsi_id(struct qlogicpti *qpti) |
1da177e4 | 754 | { |
5dc2536b DM |
755 | struct of_device *op = qpti->op; |
756 | struct device_node *dp; | |
757 | ||
758 | dp = op->node; | |
759 | ||
760 | qpti->scsi_id = of_getintprop_default(dp, "initiator-id", -1); | |
1da177e4 | 761 | if (qpti->scsi_id == -1) |
5dc2536b DM |
762 | qpti->scsi_id = of_getintprop_default(dp, "scsi-initiator-id", |
763 | -1); | |
1da177e4 LT |
764 | if (qpti->scsi_id == -1) |
765 | qpti->scsi_id = | |
5dc2536b DM |
766 | of_getintprop_default(dp->parent, |
767 | "scsi-initiator-id", 7); | |
1da177e4 LT |
768 | qpti->qhost->this_id = qpti->scsi_id; |
769 | qpti->qhost->max_sectors = 64; | |
770 | ||
771 | printk("SCSI ID %d ", qpti->scsi_id); | |
772 | } | |
773 | ||
774 | static void qpti_get_bursts(struct qlogicpti *qpti) | |
775 | { | |
5dc2536b | 776 | struct of_device *op = qpti->op; |
1da177e4 LT |
777 | u8 bursts, bmask; |
778 | ||
5dc2536b DM |
779 | bursts = of_getintprop_default(op->node, "burst-sizes", 0xff); |
780 | bmask = of_getintprop_default(op->node->parent, "burst-sizes", 0xff); | |
1da177e4 LT |
781 | if (bmask != 0xff) |
782 | bursts &= bmask; | |
783 | if (bursts == 0xff || | |
784 | (bursts & DMA_BURST16) == 0 || | |
785 | (bursts & DMA_BURST32) == 0) | |
786 | bursts = (DMA_BURST32 - 1); | |
787 | ||
788 | qpti->bursts = bursts; | |
789 | } | |
790 | ||
791 | static void qpti_get_clock(struct qlogicpti *qpti) | |
792 | { | |
793 | unsigned int cfreq; | |
794 | ||
795 | /* Check for what the clock input to this card is. | |
796 | * Default to 40Mhz. | |
797 | */ | |
798 | cfreq = prom_getintdefault(qpti->prom_node,"clock-frequency",40000000); | |
799 | qpti->clock = (cfreq + 500000)/1000000; | |
800 | if (qpti->clock == 0) /* bullshit */ | |
801 | qpti->clock = 40; | |
802 | } | |
803 | ||
804 | /* The request and response queues must each be aligned | |
805 | * on a page boundary. | |
806 | */ | |
cfb37ae1 | 807 | static int __devinit qpti_map_queues(struct qlogicpti *qpti) |
1da177e4 | 808 | { |
5dc2536b | 809 | struct of_device *op = qpti->op; |
1da177e4 LT |
810 | |
811 | #define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN) | |
5dc2536b | 812 | qpti->res_cpu = dma_alloc_coherent(&op->dev, |
738f2b7b DM |
813 | QSIZE(RES_QUEUE_LEN), |
814 | &qpti->res_dvma, GFP_ATOMIC); | |
1da177e4 LT |
815 | if (qpti->res_cpu == NULL || |
816 | qpti->res_dvma == 0) { | |
817 | printk("QPTI: Cannot map response queue.\n"); | |
818 | return -1; | |
819 | } | |
820 | ||
5dc2536b | 821 | qpti->req_cpu = dma_alloc_coherent(&op->dev, |
738f2b7b DM |
822 | QSIZE(QLOGICPTI_REQ_QUEUE_LEN), |
823 | &qpti->req_dvma, GFP_ATOMIC); | |
1da177e4 LT |
824 | if (qpti->req_cpu == NULL || |
825 | qpti->req_dvma == 0) { | |
5dc2536b | 826 | dma_free_coherent(&op->dev, QSIZE(RES_QUEUE_LEN), |
738f2b7b | 827 | qpti->res_cpu, qpti->res_dvma); |
1da177e4 LT |
828 | printk("QPTI: Cannot map request queue.\n"); |
829 | return -1; | |
830 | } | |
831 | memset(qpti->res_cpu, 0, QSIZE(RES_QUEUE_LEN)); | |
832 | memset(qpti->req_cpu, 0, QSIZE(QLOGICPTI_REQ_QUEUE_LEN)); | |
833 | return 0; | |
834 | } | |
835 | ||
1da177e4 LT |
836 | const char *qlogicpti_info(struct Scsi_Host *host) |
837 | { | |
838 | static char buf[80]; | |
839 | struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata; | |
840 | ||
c6387a48 DM |
841 | sprintf(buf, "PTI Qlogic,ISP SBUS SCSI irq %d regs at %p", |
842 | qpti->qhost->irq, qpti->qregs); | |
1da177e4 LT |
843 | return buf; |
844 | } | |
845 | ||
846 | /* I am a certified frobtronicist. */ | |
847 | static inline void marker_frob(struct Command_Entry *cmd) | |
848 | { | |
849 | struct Marker_Entry *marker = (struct Marker_Entry *) cmd; | |
850 | ||
851 | memset(marker, 0, sizeof(struct Marker_Entry)); | |
852 | marker->hdr.entry_cnt = 1; | |
853 | marker->hdr.entry_type = ENTRY_MARKER; | |
854 | marker->modifier = SYNC_ALL; | |
855 | marker->rsvd = 0; | |
856 | } | |
857 | ||
858 | static inline void cmd_frob(struct Command_Entry *cmd, struct scsi_cmnd *Cmnd, | |
859 | struct qlogicpti *qpti) | |
860 | { | |
861 | memset(cmd, 0, sizeof(struct Command_Entry)); | |
862 | cmd->hdr.entry_cnt = 1; | |
863 | cmd->hdr.entry_type = ENTRY_COMMAND; | |
864 | cmd->target_id = Cmnd->device->id; | |
865 | cmd->target_lun = Cmnd->device->lun; | |
866 | cmd->cdb_length = Cmnd->cmd_len; | |
867 | cmd->control_flags = 0; | |
868 | if (Cmnd->device->tagged_supported) { | |
869 | if (qpti->cmd_count[Cmnd->device->id] == 0) | |
870 | qpti->tag_ages[Cmnd->device->id] = jiffies; | |
60c904ae | 871 | if (time_after(jiffies, qpti->tag_ages[Cmnd->device->id] + (5*HZ))) { |
1da177e4 LT |
872 | cmd->control_flags = CFLAG_ORDERED_TAG; |
873 | qpti->tag_ages[Cmnd->device->id] = jiffies; | |
874 | } else | |
875 | cmd->control_flags = CFLAG_SIMPLE_TAG; | |
876 | } | |
877 | if ((Cmnd->cmnd[0] == WRITE_6) || | |
878 | (Cmnd->cmnd[0] == WRITE_10) || | |
879 | (Cmnd->cmnd[0] == WRITE_12)) | |
880 | cmd->control_flags |= CFLAG_WRITE; | |
881 | else | |
882 | cmd->control_flags |= CFLAG_READ; | |
883 | cmd->time_out = 30; | |
884 | memcpy(cmd->cdb, Cmnd->cmnd, Cmnd->cmd_len); | |
885 | } | |
886 | ||
887 | /* Do it to it baby. */ | |
888 | static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd, | |
889 | struct qlogicpti *qpti, u_int in_ptr, u_int out_ptr) | |
890 | { | |
891 | struct dataseg *ds; | |
2f08fe52 | 892 | struct scatterlist *sg, *s; |
1da177e4 LT |
893 | int i, n; |
894 | ||
dfb104ff | 895 | if (scsi_bufflen(Cmnd)) { |
1da177e4 LT |
896 | int sg_count; |
897 | ||
dfb104ff | 898 | sg = scsi_sglist(Cmnd); |
5dc2536b | 899 | sg_count = dma_map_sg(&qpti->op->dev, sg, |
738f2b7b DM |
900 | scsi_sg_count(Cmnd), |
901 | Cmnd->sc_data_direction); | |
1da177e4 LT |
902 | |
903 | ds = cmd->dataseg; | |
904 | cmd->segment_cnt = sg_count; | |
905 | ||
906 | /* Fill in first four sg entries: */ | |
907 | n = sg_count; | |
908 | if (n > 4) | |
909 | n = 4; | |
2f08fe52 JA |
910 | for_each_sg(sg, s, n, i) { |
911 | ds[i].d_base = sg_dma_address(s); | |
912 | ds[i].d_count = sg_dma_len(s); | |
1da177e4 LT |
913 | } |
914 | sg_count -= 4; | |
2f08fe52 | 915 | sg = s; |
1da177e4 LT |
916 | while (sg_count > 0) { |
917 | struct Continuation_Entry *cont; | |
918 | ||
919 | ++cmd->hdr.entry_cnt; | |
920 | cont = (struct Continuation_Entry *) &qpti->req_cpu[in_ptr]; | |
921 | in_ptr = NEXT_REQ_PTR(in_ptr); | |
922 | if (in_ptr == out_ptr) | |
923 | return -1; | |
924 | ||
925 | cont->hdr.entry_type = ENTRY_CONTINUATION; | |
926 | cont->hdr.entry_cnt = 0; | |
927 | cont->hdr.sys_def_1 = 0; | |
928 | cont->hdr.flags = 0; | |
929 | cont->reserved = 0; | |
930 | ds = cont->dataseg; | |
931 | n = sg_count; | |
932 | if (n > 7) | |
933 | n = 7; | |
2f08fe52 JA |
934 | for_each_sg(sg, s, n, i) { |
935 | ds[i].d_base = sg_dma_address(s); | |
936 | ds[i].d_count = sg_dma_len(s); | |
1da177e4 LT |
937 | } |
938 | sg_count -= n; | |
7e6cfb54 | 939 | sg = s; |
1da177e4 | 940 | } |
1da177e4 LT |
941 | } else { |
942 | cmd->dataseg[0].d_base = 0; | |
943 | cmd->dataseg[0].d_count = 0; | |
944 | cmd->segment_cnt = 1; /* Shouldn't this be 0? */ | |
945 | } | |
946 | ||
947 | /* Committed, record Scsi_Cmd so we can find it later. */ | |
948 | cmd->handle = in_ptr; | |
949 | qpti->cmd_slots[in_ptr] = Cmnd; | |
950 | ||
951 | qpti->cmd_count[Cmnd->device->id]++; | |
952 | sbus_writew(in_ptr, qpti->qregs + MBOX4); | |
953 | qpti->req_in_ptr = in_ptr; | |
954 | ||
955 | return in_ptr; | |
956 | } | |
957 | ||
958 | static inline void update_can_queue(struct Scsi_Host *host, u_int in_ptr, u_int out_ptr) | |
959 | { | |
960 | /* Temporary workaround until bug is found and fixed (one bug has been found | |
961 | already, but fixing it makes things even worse) -jj */ | |
962 | int num_free = QLOGICPTI_REQ_QUEUE_LEN - REQ_QUEUE_DEPTH(in_ptr, out_ptr) - 64; | |
963 | host->can_queue = host->host_busy + num_free; | |
964 | host->sg_tablesize = QLOGICPTI_MAX_SG(num_free); | |
965 | } | |
966 | ||
9ec76fbf | 967 | static int qlogicpti_slave_configure(struct scsi_device *sdev) |
f75884d2 | 968 | { |
9ec76fbf MW |
969 | struct qlogicpti *qpti = shost_priv(sdev->host); |
970 | int tgt = sdev->id; | |
971 | u_short param[6]; | |
f75884d2 | 972 | |
9ec76fbf MW |
973 | /* tags handled in midlayer */ |
974 | /* enable sync mode? */ | |
975 | if (sdev->sdtr) { | |
976 | qpti->dev_param[tgt].device_flags |= 0x10; | |
f75884d2 | 977 | } else { |
9ec76fbf MW |
978 | qpti->dev_param[tgt].synchronous_offset = 0; |
979 | qpti->dev_param[tgt].synchronous_period = 0; | |
f75884d2 | 980 | } |
9ec76fbf MW |
981 | /* are we wide capable? */ |
982 | if (sdev->wdtr) | |
983 | qpti->dev_param[tgt].device_flags |= 0x20; | |
984 | ||
985 | param[0] = MBOX_SET_TARGET_PARAMS; | |
986 | param[1] = (tgt << 8); | |
987 | param[2] = (qpti->dev_param[tgt].device_flags << 8); | |
988 | if (qpti->dev_param[tgt].device_flags & 0x10) { | |
989 | param[3] = (qpti->dev_param[tgt].synchronous_offset << 8) | | |
990 | qpti->dev_param[tgt].synchronous_period; | |
991 | } else { | |
992 | param[3] = 0; | |
1da177e4 | 993 | } |
9ec76fbf MW |
994 | qlogicpti_mbox_command(qpti, param, 0); |
995 | return 0; | |
1da177e4 LT |
996 | } |
997 | ||
998 | /* | |
999 | * The middle SCSI layer ensures that queuecommand never gets invoked | |
1000 | * concurrently with itself or the interrupt handler (though the | |
1001 | * interrupt handler may call this routine as part of | |
1002 | * request-completion handling). | |
1003 | * | |
1004 | * "This code must fly." -davem | |
1005 | */ | |
1006 | static int qlogicpti_queuecommand(struct scsi_cmnd *Cmnd, void (*done)(struct scsi_cmnd *)) | |
1007 | { | |
1008 | struct Scsi_Host *host = Cmnd->device->host; | |
1009 | struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata; | |
1010 | struct Command_Entry *cmd; | |
1011 | u_int out_ptr; | |
1012 | int in_ptr; | |
1013 | ||
1014 | Cmnd->scsi_done = done; | |
1015 | ||
1016 | in_ptr = qpti->req_in_ptr; | |
1017 | cmd = (struct Command_Entry *) &qpti->req_cpu[in_ptr]; | |
1018 | out_ptr = sbus_readw(qpti->qregs + MBOX4); | |
1019 | in_ptr = NEXT_REQ_PTR(in_ptr); | |
1020 | if (in_ptr == out_ptr) | |
1021 | goto toss_command; | |
1022 | ||
1023 | if (qpti->send_marker) { | |
1024 | marker_frob(cmd); | |
1025 | qpti->send_marker = 0; | |
1026 | if (NEXT_REQ_PTR(in_ptr) == out_ptr) { | |
1027 | sbus_writew(in_ptr, qpti->qregs + MBOX4); | |
1028 | qpti->req_in_ptr = in_ptr; | |
1029 | goto toss_command; | |
1030 | } | |
1031 | cmd = (struct Command_Entry *) &qpti->req_cpu[in_ptr]; | |
1032 | in_ptr = NEXT_REQ_PTR(in_ptr); | |
1033 | } | |
1034 | cmd_frob(cmd, Cmnd, qpti); | |
1035 | if ((in_ptr = load_cmd(Cmnd, cmd, qpti, in_ptr, out_ptr)) == -1) | |
1036 | goto toss_command; | |
1037 | ||
1038 | update_can_queue(host, in_ptr, out_ptr); | |
1039 | ||
1040 | return 0; | |
1041 | ||
1042 | toss_command: | |
1043 | printk(KERN_EMERG "qlogicpti%d: request queue overflow\n", | |
1044 | qpti->qpti_id); | |
1045 | ||
1046 | /* Unfortunately, unless you use the new EH code, which | |
1047 | * we don't, the midlayer will ignore the return value, | |
1048 | * which is insane. We pick up the pieces like this. | |
1049 | */ | |
1050 | Cmnd->result = DID_BUS_BUSY; | |
1051 | done(Cmnd); | |
1052 | return 1; | |
1053 | } | |
1054 | ||
1055 | static int qlogicpti_return_status(struct Status_Entry *sts, int id) | |
1056 | { | |
1057 | int host_status = DID_ERROR; | |
1058 | ||
1059 | switch (sts->completion_status) { | |
1060 | case CS_COMPLETE: | |
1061 | host_status = DID_OK; | |
1062 | break; | |
1063 | case CS_INCOMPLETE: | |
1064 | if (!(sts->state_flags & SF_GOT_BUS)) | |
1065 | host_status = DID_NO_CONNECT; | |
1066 | else if (!(sts->state_flags & SF_GOT_TARGET)) | |
1067 | host_status = DID_BAD_TARGET; | |
1068 | else if (!(sts->state_flags & SF_SENT_CDB)) | |
1069 | host_status = DID_ERROR; | |
1070 | else if (!(sts->state_flags & SF_TRANSFERRED_DATA)) | |
1071 | host_status = DID_ERROR; | |
1072 | else if (!(sts->state_flags & SF_GOT_STATUS)) | |
1073 | host_status = DID_ERROR; | |
1074 | else if (!(sts->state_flags & SF_GOT_SENSE)) | |
1075 | host_status = DID_ERROR; | |
1076 | break; | |
1077 | case CS_DMA_ERROR: | |
1078 | case CS_TRANSPORT_ERROR: | |
1079 | host_status = DID_ERROR; | |
1080 | break; | |
1081 | case CS_RESET_OCCURRED: | |
1082 | case CS_BUS_RESET: | |
1083 | host_status = DID_RESET; | |
1084 | break; | |
1085 | case CS_ABORTED: | |
1086 | host_status = DID_ABORT; | |
1087 | break; | |
1088 | case CS_TIMEOUT: | |
1089 | host_status = DID_TIME_OUT; | |
1090 | break; | |
1091 | case CS_DATA_OVERRUN: | |
1092 | case CS_COMMAND_OVERRUN: | |
1093 | case CS_STATUS_OVERRUN: | |
1094 | case CS_BAD_MESSAGE: | |
1095 | case CS_NO_MESSAGE_OUT: | |
1096 | case CS_EXT_ID_FAILED: | |
1097 | case CS_IDE_MSG_FAILED: | |
1098 | case CS_ABORT_MSG_FAILED: | |
1099 | case CS_NOP_MSG_FAILED: | |
1100 | case CS_PARITY_ERROR_MSG_FAILED: | |
1101 | case CS_DEVICE_RESET_MSG_FAILED: | |
1102 | case CS_ID_MSG_FAILED: | |
1103 | case CS_UNEXP_BUS_FREE: | |
1104 | host_status = DID_ERROR; | |
1105 | break; | |
1106 | case CS_DATA_UNDERRUN: | |
1107 | host_status = DID_OK; | |
1108 | break; | |
1109 | default: | |
585a8a59 | 1110 | printk(KERN_EMERG "qlogicpti%d: unknown completion status 0x%04x\n", |
1da177e4 LT |
1111 | id, sts->completion_status); |
1112 | host_status = DID_ERROR; | |
1113 | break; | |
1114 | } | |
1115 | ||
1116 | return (sts->scsi_status & STATUS_MASK) | (host_status << 16); | |
1117 | } | |
1118 | ||
1119 | static struct scsi_cmnd *qlogicpti_intr_handler(struct qlogicpti *qpti) | |
1120 | { | |
1121 | struct scsi_cmnd *Cmnd, *done_queue = NULL; | |
1122 | struct Status_Entry *sts; | |
1123 | u_int in_ptr, out_ptr; | |
1124 | ||
1125 | if (!(sbus_readw(qpti->qregs + SBUS_STAT) & SBUS_STAT_RINT)) | |
1126 | return NULL; | |
1127 | ||
1128 | in_ptr = sbus_readw(qpti->qregs + MBOX5); | |
1129 | sbus_writew(HCCTRL_CRIRQ, qpti->qregs + HCCTRL); | |
1130 | if (sbus_readw(qpti->qregs + SBUS_SEMAPHORE) & SBUS_SEMAPHORE_LCK) { | |
1131 | switch (sbus_readw(qpti->qregs + MBOX0)) { | |
1132 | case ASYNC_SCSI_BUS_RESET: | |
1133 | case EXECUTION_TIMEOUT_RESET: | |
1134 | qpti->send_marker = 1; | |
1135 | break; | |
1136 | case INVALID_COMMAND: | |
1137 | case HOST_INTERFACE_ERROR: | |
1138 | case COMMAND_ERROR: | |
1139 | case COMMAND_PARAM_ERROR: | |
1140 | break; | |
1141 | }; | |
1142 | sbus_writew(0, qpti->qregs + SBUS_SEMAPHORE); | |
1143 | } | |
1144 | ||
1145 | /* This looks like a network driver! */ | |
1146 | out_ptr = qpti->res_out_ptr; | |
1147 | while (out_ptr != in_ptr) { | |
1148 | u_int cmd_slot; | |
1149 | ||
1150 | sts = (struct Status_Entry *) &qpti->res_cpu[out_ptr]; | |
1151 | out_ptr = NEXT_RES_PTR(out_ptr); | |
1152 | ||
1153 | /* We store an index in the handle, not the pointer in | |
1154 | * some form. This avoids problems due to the fact | |
1155 | * that the handle provided is only 32-bits. -DaveM | |
1156 | */ | |
1157 | cmd_slot = sts->handle; | |
1158 | Cmnd = qpti->cmd_slots[cmd_slot]; | |
1159 | qpti->cmd_slots[cmd_slot] = NULL; | |
1160 | ||
1161 | if (sts->completion_status == CS_RESET_OCCURRED || | |
1162 | sts->completion_status == CS_ABORTED || | |
1163 | (sts->status_flags & STF_BUS_RESET)) | |
1164 | qpti->send_marker = 1; | |
1165 | ||
1166 | if (sts->state_flags & SF_GOT_SENSE) | |
1167 | memcpy(Cmnd->sense_buffer, sts->req_sense_data, | |
b80ca4f7 | 1168 | SCSI_SENSE_BUFFERSIZE); |
1da177e4 LT |
1169 | |
1170 | if (sts->hdr.entry_type == ENTRY_STATUS) | |
1171 | Cmnd->result = | |
1172 | qlogicpti_return_status(sts, qpti->qpti_id); | |
1173 | else | |
1174 | Cmnd->result = DID_ERROR << 16; | |
1175 | ||
dfb104ff | 1176 | if (scsi_bufflen(Cmnd)) |
5dc2536b | 1177 | dma_unmap_sg(&qpti->op->dev, |
738f2b7b DM |
1178 | scsi_sglist(Cmnd), scsi_sg_count(Cmnd), |
1179 | Cmnd->sc_data_direction); | |
dfb104ff | 1180 | |
1da177e4 LT |
1181 | qpti->cmd_count[Cmnd->device->id]--; |
1182 | sbus_writew(out_ptr, qpti->qregs + MBOX5); | |
1183 | Cmnd->host_scribble = (unsigned char *) done_queue; | |
1184 | done_queue = Cmnd; | |
1185 | } | |
1186 | qpti->res_out_ptr = out_ptr; | |
1187 | ||
1188 | return done_queue; | |
1189 | } | |
1190 | ||
7d12e780 | 1191 | static irqreturn_t qpti_intr(int irq, void *dev_id) |
1da177e4 LT |
1192 | { |
1193 | struct qlogicpti *qpti = dev_id; | |
1194 | unsigned long flags; | |
1195 | struct scsi_cmnd *dq; | |
1196 | ||
1197 | spin_lock_irqsave(qpti->qhost->host_lock, flags); | |
1198 | dq = qlogicpti_intr_handler(qpti); | |
1199 | ||
1200 | if (dq != NULL) { | |
1201 | do { | |
1202 | struct scsi_cmnd *next; | |
1203 | ||
1204 | next = (struct scsi_cmnd *) dq->host_scribble; | |
1205 | dq->scsi_done(dq); | |
1206 | dq = next; | |
1207 | } while (dq != NULL); | |
1208 | } | |
1209 | spin_unlock_irqrestore(qpti->qhost->host_lock, flags); | |
1210 | ||
1211 | return IRQ_HANDLED; | |
1212 | } | |
1213 | ||
1214 | static int qlogicpti_abort(struct scsi_cmnd *Cmnd) | |
1215 | { | |
1216 | u_short param[6]; | |
1217 | struct Scsi_Host *host = Cmnd->device->host; | |
1218 | struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata; | |
1219 | int return_status = SUCCESS; | |
1220 | u32 cmd_cookie; | |
1221 | int i; | |
1222 | ||
585a8a59 MF |
1223 | printk(KERN_WARNING "qlogicpti%d: Aborting cmd for tgt[%d] lun[%d]\n", |
1224 | qpti->qpti_id, (int)Cmnd->device->id, (int)Cmnd->device->lun); | |
1da177e4 LT |
1225 | |
1226 | qlogicpti_disable_irqs(qpti); | |
1227 | ||
1228 | /* Find the 32-bit cookie we gave to the firmware for | |
1229 | * this command. | |
1230 | */ | |
1231 | for (i = 0; i < QLOGICPTI_REQ_QUEUE_LEN + 1; i++) | |
1232 | if (qpti->cmd_slots[i] == Cmnd) | |
1233 | break; | |
1234 | cmd_cookie = i; | |
1235 | ||
1236 | param[0] = MBOX_ABORT; | |
1237 | param[1] = (((u_short) Cmnd->device->id) << 8) | Cmnd->device->lun; | |
1238 | param[2] = cmd_cookie >> 16; | |
1239 | param[3] = cmd_cookie & 0xffff; | |
1240 | if (qlogicpti_mbox_command(qpti, param, 0) || | |
1241 | (param[0] != MBOX_COMMAND_COMPLETE)) { | |
585a8a59 MF |
1242 | printk(KERN_EMERG "qlogicpti%d: scsi abort failure: %x\n", |
1243 | qpti->qpti_id, param[0]); | |
1da177e4 LT |
1244 | return_status = FAILED; |
1245 | } | |
1246 | ||
1247 | qlogicpti_enable_irqs(qpti); | |
1248 | ||
1249 | return return_status; | |
1250 | } | |
1251 | ||
1252 | static int qlogicpti_reset(struct scsi_cmnd *Cmnd) | |
1253 | { | |
1254 | u_short param[6]; | |
1255 | struct Scsi_Host *host = Cmnd->device->host; | |
1256 | struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata; | |
1257 | int return_status = SUCCESS; | |
1258 | ||
585a8a59 MF |
1259 | printk(KERN_WARNING "qlogicpti%d: Resetting SCSI bus!\n", |
1260 | qpti->qpti_id); | |
1da177e4 LT |
1261 | |
1262 | qlogicpti_disable_irqs(qpti); | |
1263 | ||
1264 | param[0] = MBOX_BUS_RESET; | |
1265 | param[1] = qpti->host_param.bus_reset_delay; | |
1266 | if (qlogicpti_mbox_command(qpti, param, 0) || | |
1267 | (param[0] != MBOX_COMMAND_COMPLETE)) { | |
585a8a59 MF |
1268 | printk(KERN_EMERG "qlogicisp%d: scsi bus reset failure: %x\n", |
1269 | qpti->qpti_id, param[0]); | |
1da177e4 LT |
1270 | return_status = FAILED; |
1271 | } | |
1272 | ||
1273 | qlogicpti_enable_irqs(qpti); | |
1274 | ||
1275 | return return_status; | |
1276 | } | |
1277 | ||
3d4253d9 DM |
1278 | static struct scsi_host_template qpti_template = { |
1279 | .module = THIS_MODULE, | |
1280 | .name = "qlogicpti", | |
1da177e4 | 1281 | .info = qlogicpti_info, |
9ec76fbf MW |
1282 | .queuecommand = qlogicpti_queuecommand, |
1283 | .slave_configure = qlogicpti_slave_configure, | |
1da177e4 LT |
1284 | .eh_abort_handler = qlogicpti_abort, |
1285 | .eh_bus_reset_handler = qlogicpti_reset, | |
1286 | .can_queue = QLOGICPTI_REQ_QUEUE_LEN, | |
1287 | .this_id = 7, | |
1288 | .sg_tablesize = QLOGICPTI_MAX_SG(QLOGICPTI_REQ_QUEUE_LEN), | |
1289 | .cmd_per_lun = 1, | |
1290 | .use_clustering = ENABLE_CLUSTERING, | |
1291 | }; | |
1292 | ||
5dc2536b | 1293 | static int __devinit qpti_sbus_probe(struct of_device *op, const struct of_device_id *match) |
3d4253d9 | 1294 | { |
3d4253d9 | 1295 | struct scsi_host_template *tpnt = match->data; |
5dc2536b | 1296 | struct device_node *dp = op->node; |
3d4253d9 DM |
1297 | struct Scsi_Host *host; |
1298 | struct qlogicpti *qpti; | |
5dc2536b | 1299 | static int nqptis; |
ccf0dec6 | 1300 | const char *fcode; |
3d4253d9 DM |
1301 | |
1302 | /* Sometimes Antares cards come up not completely | |
1303 | * setup, and we get a report of a zero IRQ. | |
1304 | */ | |
5dc2536b | 1305 | if (op->irqs[0] == 0) |
3d4253d9 DM |
1306 | return -ENODEV; |
1307 | ||
1308 | host = scsi_host_alloc(tpnt, sizeof(struct qlogicpti)); | |
1309 | if (!host) | |
1310 | return -ENOMEM; | |
1311 | ||
5dc2536b | 1312 | qpti = shost_priv(host); |
3d4253d9 DM |
1313 | |
1314 | host->max_id = MAX_TARGETS; | |
1315 | qpti->qhost = host; | |
5dc2536b | 1316 | qpti->op = op; |
3d4253d9 | 1317 | qpti->qpti_id = nqptis; |
5dc2536b | 1318 | strcpy(qpti->prom_name, op->node->name); |
3d4253d9 DM |
1319 | qpti->is_pti = strcmp(qpti->prom_name, "QLGC,isp"); |
1320 | ||
1321 | if (qpti_map_regs(qpti) < 0) | |
1322 | goto fail_unlink; | |
1323 | ||
1324 | if (qpti_register_irq(qpti) < 0) | |
1325 | goto fail_unmap_regs; | |
1326 | ||
1327 | qpti_get_scsi_id(qpti); | |
1328 | qpti_get_bursts(qpti); | |
1329 | qpti_get_clock(qpti); | |
1330 | ||
1331 | /* Clear out scsi_cmnd array. */ | |
1332 | memset(qpti->cmd_slots, 0, sizeof(qpti->cmd_slots)); | |
1333 | ||
1334 | if (qpti_map_queues(qpti) < 0) | |
1335 | goto fail_free_irq; | |
1336 | ||
1337 | /* Load the firmware. */ | |
1338 | if (qlogicpti_load_firmware(qpti)) | |
1339 | goto fail_unmap_queues; | |
1340 | if (qpti->is_pti) { | |
1341 | /* Check the PTI status reg. */ | |
1342 | if (qlogicpti_verify_tmon(qpti)) | |
1343 | goto fail_unmap_queues; | |
1344 | } | |
1345 | ||
1346 | /* Reset the ISP and init res/req queues. */ | |
1347 | if (qlogicpti_reset_hardware(host)) | |
1348 | goto fail_unmap_queues; | |
1349 | ||
3d4253d9 DM |
1350 | printk("(Firmware v%d.%d.%d)", qpti->fware_majrev, |
1351 | qpti->fware_minrev, qpti->fware_micrev); | |
1352 | ||
1353 | fcode = of_get_property(dp, "isp-fcode", NULL); | |
1354 | if (fcode && fcode[0]) | |
585a8a59 | 1355 | printk("(FCode %s)", fcode); |
3d4253d9 DM |
1356 | if (of_find_property(dp, "differential", NULL) != NULL) |
1357 | qpti->differential = 1; | |
1358 | ||
585a8a59 MF |
1359 | printk("\nqlogicpti%d: [%s Wide, using %s interface]\n", |
1360 | qpti->qpti_id, | |
3d4253d9 DM |
1361 | (qpti->ultra ? "Ultra" : "Fast"), |
1362 | (qpti->differential ? "differential" : "single ended")); | |
1363 | ||
5dc2536b | 1364 | if (scsi_add_host(host, &op->dev)) { |
585a8a59 MF |
1365 | printk("qlogicpti%d: Failed scsi_add_host\n", qpti->qpti_id); |
1366 | goto fail_unmap_queues; | |
1367 | } | |
1368 | ||
5dc2536b | 1369 | dev_set_drvdata(&op->dev, qpti); |
3d4253d9 DM |
1370 | |
1371 | qpti_chain_add(qpti); | |
1372 | ||
1373 | scsi_scan_host(host); | |
1374 | nqptis++; | |
1375 | ||
1376 | return 0; | |
1377 | ||
1378 | fail_unmap_queues: | |
1379 | #define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN) | |
5dc2536b | 1380 | dma_free_coherent(&op->dev, |
738f2b7b DM |
1381 | QSIZE(RES_QUEUE_LEN), |
1382 | qpti->res_cpu, qpti->res_dvma); | |
5dc2536b | 1383 | dma_free_coherent(&op->dev, |
738f2b7b DM |
1384 | QSIZE(QLOGICPTI_REQ_QUEUE_LEN), |
1385 | qpti->req_cpu, qpti->req_dvma); | |
3d4253d9 DM |
1386 | #undef QSIZE |
1387 | ||
1388 | fail_unmap_regs: | |
5dc2536b DM |
1389 | of_iounmap(&op->resource[0], qpti->qregs, |
1390 | resource_size(&op->resource[0])); | |
3d4253d9 | 1391 | if (qpti->is_pti) |
5dc2536b DM |
1392 | of_iounmap(&op->resource[0], qpti->sreg, |
1393 | sizeof(unsigned char)); | |
3d4253d9 DM |
1394 | |
1395 | fail_free_irq: | |
1396 | free_irq(qpti->irq, qpti); | |
1397 | ||
1398 | fail_unlink: | |
1399 | scsi_host_put(host); | |
1400 | ||
1401 | return -ENODEV; | |
1402 | } | |
1403 | ||
5dc2536b | 1404 | static int __devexit qpti_sbus_remove(struct of_device *op) |
3d4253d9 | 1405 | { |
5dc2536b | 1406 | struct qlogicpti *qpti = dev_get_drvdata(&op->dev); |
3d4253d9 DM |
1407 | |
1408 | qpti_chain_del(qpti); | |
1409 | ||
1410 | scsi_remove_host(qpti->qhost); | |
1411 | ||
1412 | /* Shut up the card. */ | |
1413 | sbus_writew(0, qpti->qregs + SBUS_CTRL); | |
1414 | ||
1415 | /* Free IRQ handler and unmap Qlogic,ISP and PTI status regs. */ | |
1416 | free_irq(qpti->irq, qpti); | |
1417 | ||
1418 | #define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN) | |
5dc2536b | 1419 | dma_free_coherent(&op->dev, |
738f2b7b DM |
1420 | QSIZE(RES_QUEUE_LEN), |
1421 | qpti->res_cpu, qpti->res_dvma); | |
5dc2536b | 1422 | dma_free_coherent(&op->dev, |
738f2b7b DM |
1423 | QSIZE(QLOGICPTI_REQ_QUEUE_LEN), |
1424 | qpti->req_cpu, qpti->req_dvma); | |
3d4253d9 DM |
1425 | #undef QSIZE |
1426 | ||
5dc2536b DM |
1427 | of_iounmap(&op->resource[0], qpti->qregs, |
1428 | resource_size(&op->resource[0])); | |
3d4253d9 | 1429 | if (qpti->is_pti) |
5dc2536b | 1430 | of_iounmap(&op->resource[0], qpti->sreg, sizeof(unsigned char)); |
3d4253d9 DM |
1431 | |
1432 | scsi_host_put(qpti->qhost); | |
1433 | ||
1434 | return 0; | |
1435 | } | |
1436 | ||
fd098316 | 1437 | static const struct of_device_id qpti_match[] = { |
3d4253d9 DM |
1438 | { |
1439 | .name = "ptisp", | |
1440 | .data = &qpti_template, | |
1441 | }, | |
1442 | { | |
1443 | .name = "PTI,ptisp", | |
1444 | .data = &qpti_template, | |
1445 | }, | |
1446 | { | |
1447 | .name = "QLGC,isp", | |
1448 | .data = &qpti_template, | |
1449 | }, | |
1450 | { | |
1451 | .name = "SUNW,isp", | |
1452 | .data = &qpti_template, | |
1453 | }, | |
1454 | {}, | |
1455 | }; | |
1456 | MODULE_DEVICE_TABLE(of, qpti_match); | |
1457 | ||
1458 | static struct of_platform_driver qpti_sbus_driver = { | |
1459 | .name = "qpti", | |
1460 | .match_table = qpti_match, | |
1461 | .probe = qpti_sbus_probe, | |
1462 | .remove = __devexit_p(qpti_sbus_remove), | |
1463 | }; | |
1da177e4 | 1464 | |
3d4253d9 DM |
1465 | static int __init qpti_init(void) |
1466 | { | |
5dc2536b | 1467 | return of_register_driver(&qpti_sbus_driver, &of_bus_type); |
3d4253d9 DM |
1468 | } |
1469 | ||
1470 | static void __exit qpti_exit(void) | |
1471 | { | |
1472 | of_unregister_driver(&qpti_sbus_driver); | |
1473 | } | |
1da177e4 | 1474 | |
3d4253d9 DM |
1475 | MODULE_DESCRIPTION("QlogicISP SBUS driver"); |
1476 | MODULE_AUTHOR("David S. Miller (davem@davemloft.net)"); | |
1da177e4 | 1477 | MODULE_LICENSE("GPL"); |
5dc2536b | 1478 | MODULE_VERSION("2.1"); |
f894e74d | 1479 | MODULE_FIRMWARE("qlogic/isp1000.bin"); |
1da177e4 | 1480 | |
3d4253d9 DM |
1481 | module_init(qpti_init); |
1482 | module_exit(qpti_exit); |