[deliverable/linux.git] / drivers / scsi / vmw_pvscsi.h

/*
 * VMware PVSCSI header file
 *
 * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; version 2 of the License and no later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
 * NON INFRINGEMENT.  See the GNU General Public License for more
 * details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Maintained by: Arvind Kumar <arvindkumar@vmware.com>
 *
 */

#ifndef _VMW_PVSCSI_H_
#define _VMW_PVSCSI_H_

#include <linux/types.h>

#define PVSCSI_DRIVER_VERSION_STRING   "1.0.2.0-k"

#define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128

#define MASK(n)        ((1 << (n)) - 1)        /* make an n-bit mask */

#define PCI_VENDOR_ID_VMWARE		0x15AD
#define PCI_DEVICE_ID_VMWARE_PVSCSI	0x07C0

/*
 * host adapter status/error codes
 */
enum HostBusAdapterStatus {
	BTSTAT_SUCCESS       = 0x00,  /* CCB complete normally with no errors */
	BTSTAT_LINKED_COMMAND_COMPLETED           = 0x0a,
	BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b,
	BTSTAT_DATA_UNDERRUN = 0x0c,
	BTSTAT_SELTIMEO      = 0x11,  /* SCSI selection timeout */
	BTSTAT_DATARUN       = 0x12,  /* data overrun/underrun */
	BTSTAT_BUSFREE       = 0x13,  /* unexpected bus free */
	BTSTAT_INVPHASE      = 0x14,  /* invalid bus phase or sequence
				       * requested by target */
	BTSTAT_LUNMISMATCH   = 0x17,  /* linked CCB has different LUN from
				       * first CCB */
	BTSTAT_INVPARAM      = 0x1a,  /* invalid parameter in CCB or segment
				       * list */
	BTSTAT_SENSFAILED    = 0x1b,  /* auto request sense failed */
	BTSTAT_TAGREJECT     = 0x1c,  /* SCSI II tagged queueing message
				       * rejected by target */
	BTSTAT_BADMSG        = 0x1d,  /* unsupported message received by the
				       * host adapter */
	BTSTAT_HAHARDWARE    = 0x20,  /* host adapter hardware failed */
	BTSTAT_NORESPONSE    = 0x21,  /* target did not respond to SCSI ATN,
				       * sent a SCSI RST */
	BTSTAT_SENTRST       = 0x22,  /* host adapter asserted a SCSI RST */
	BTSTAT_RECVRST       = 0x23,  /* other SCSI devices asserted a SCSI
				       * RST */
	BTSTAT_DISCONNECT    = 0x24,  /* target device reconnected improperly
				       * (w/o tag) */
	BTSTAT_BUSRESET      = 0x25,  /* host adapter issued BUS device reset */
	BTSTAT_ABORTQUEUE    = 0x26,  /* abort queue generated */
	BTSTAT_HASOFTWARE    = 0x27,  /* host adapter software error */
	BTSTAT_HATIMEOUT     = 0x30,  /* host adapter hardware timeout error */
	BTSTAT_SCSIPARITY    = 0x34,  /* SCSI parity error detected */
};

/*
 * SCSI device status values.
 */
enum ScsiDeviceStatus {
	SDSTAT_GOOD  = 0x00, /* No errors. */
	SDSTAT_CHECK = 0x02, /* Check condition. */
};

/*
 * Register offsets.
 *
 * These registers are accessible both via i/o space and mm i/o.
 */

enum PVSCSIRegOffset {
	PVSCSI_REG_OFFSET_COMMAND        =    0x0,
	PVSCSI_REG_OFFSET_COMMAND_DATA   =    0x4,
	PVSCSI_REG_OFFSET_COMMAND_STATUS =    0x8,
	PVSCSI_REG_OFFSET_LAST_STS_0     =  0x100,
	PVSCSI_REG_OFFSET_LAST_STS_1     =  0x104,
	PVSCSI_REG_OFFSET_LAST_STS_2     =  0x108,
	PVSCSI_REG_OFFSET_LAST_STS_3     =  0x10c,
	PVSCSI_REG_OFFSET_INTR_STATUS    = 0x100c,
	PVSCSI_REG_OFFSET_INTR_MASK      = 0x2010,
	PVSCSI_REG_OFFSET_KICK_NON_RW_IO = 0x3014,
	PVSCSI_REG_OFFSET_DEBUG          = 0x3018,
	PVSCSI_REG_OFFSET_KICK_RW_IO     = 0x4018,
};

/*
 * Virtual h/w commands.
 */

enum PVSCSICommands {
	PVSCSI_CMD_FIRST             = 0, /* has to be first */

	PVSCSI_CMD_ADAPTER_RESET     = 1,
	PVSCSI_CMD_ISSUE_SCSI        = 2,
	PVSCSI_CMD_SETUP_RINGS       = 3,
	PVSCSI_CMD_RESET_BUS         = 4,
	PVSCSI_CMD_RESET_DEVICE      = 5,
	PVSCSI_CMD_ABORT_CMD         = 6,
	PVSCSI_CMD_CONFIG            = 7,
	PVSCSI_CMD_SETUP_MSG_RING    = 8,
	PVSCSI_CMD_DEVICE_UNPLUG     = 9,

	PVSCSI_CMD_LAST              = 10  /* has to be last */
};

/*
 * Command descriptor for PVSCSI_CMD_RESET_DEVICE --
 */

struct PVSCSICmdDescResetDevice {
	u32	target;
	u8	lun[8];
} __packed;

/*
 * Command descriptor for PVSCSI_CMD_CONFIG --
 */

struct PVSCSICmdDescConfigCmd {
	u64 cmpAddr;
	u64 configPageAddress;
	u32 configPageNum;
	u32 _pad;
} __packed;

enum PVSCSIConfigPageType {
	PVSCSI_CONFIG_PAGE_CONTROLLER = 0x1958,
	PVSCSI_CONFIG_PAGE_PHY        = 0x1959,
	PVSCSI_CONFIG_PAGE_DEVICE     = 0x195a,
};

enum PVSCSIConfigPageAddressType {
	PVSCSI_CONFIG_CONTROLLER_ADDRESS = 0x2120,
	PVSCSI_CONFIG_BUSTARGET_ADDRESS  = 0x2121,
	PVSCSI_CONFIG_PHY_ADDRESS        = 0x2122,
};

/*
 * Command descriptor for PVSCSI_CMD_ABORT_CMD --
 *
 * - currently does not support specifying the LUN.
 * - _pad should be 0.
 */

struct PVSCSICmdDescAbortCmd {
	u64	context;
	u32	target;
	u32	_pad;
} __packed;

/*
 * Command descriptor for PVSCSI_CMD_SETUP_RINGS --
 *
 * Notes:
 * - reqRingNumPages and cmpRingNumPages need to be power of two.
 * - reqRingNumPages and cmpRingNumPages need to be different from 0,
 * - reqRingNumPages and cmpRingNumPages need to be inferior to
 *   PVSCSI_SETUP_RINGS_MAX_NUM_PAGES.
 */

#define PVSCSI_SETUP_RINGS_MAX_NUM_PAGES        32
struct PVSCSICmdDescSetupRings {
	u32	reqRingNumPages;
	u32	cmpRingNumPages;
	u64	ringsStatePPN;
	u64	reqRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES];
	u64	cmpRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES];
} __packed;

/*
 * Command descriptor for PVSCSI_CMD_SETUP_MSG_RING --
 *
 * Notes:
 * - this command was not supported in the initial revision of the h/w
 *   interface. Before using it, you need to check that it is supported by
 *   writing PVSCSI_CMD_SETUP_MSG_RING to the 'command' register, then
 *   immediately after read the 'command status' register:
 *       * a value of -1 means that the cmd is NOT supported,
 *       * a value != -1 means that the cmd IS supported.
 *   If it's supported the 'command status' register should return:
 *      sizeof(PVSCSICmdDescSetupMsgRing) / sizeof(u32).
 * - this command should be issued _after_ the usual SETUP_RINGS so that the
 *   RingsState page is already setup. If not, the command is a nop.
 * - numPages needs to be a power of two,
 * - numPages needs to be different from 0,
 * - _pad should be zero.
 */

#define PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES  16

struct PVSCSICmdDescSetupMsgRing {
	u32	numPages;
	u32	_pad;
	u64	ringPPNs[PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES];
} __packed;

enum PVSCSIMsgType {
	PVSCSI_MSG_DEV_ADDED          = 0,
	PVSCSI_MSG_DEV_REMOVED        = 1,
	PVSCSI_MSG_LAST               = 2,
};

/*
 * Msg descriptor.
 *
 * sizeof(struct PVSCSIRingMsgDesc) == 128.
 *
 * - type is of type enum PVSCSIMsgType.
 * - the content of args depend on the type of event being delivered.
 */

struct PVSCSIRingMsgDesc {
	u32	type;
	u32	args[31];
} __packed;

struct PVSCSIMsgDescDevStatusChanged {
	u32	type;  /* PVSCSI_MSG_DEV _ADDED / _REMOVED */
	u32	bus;
	u32	target;
	u8	lun[8];
	u32	pad[27];
} __packed;

/*
 * Rings state.
 *
 * - the fields:
 *    . msgProdIdx,
 *    . msgConsIdx,
 *    . msgNumEntriesLog2,
 *   .. are only used once the SETUP_MSG_RING cmd has been issued.
 * - '_pad' helps to ensure that the msg related fields are on their own
 *   cache-line.
 */

struct PVSCSIRingsState {
	u32	reqProdIdx;
	u32	reqConsIdx;
	u32	reqNumEntriesLog2;

	u32	cmpProdIdx;
	u32	cmpConsIdx;
	u32	cmpNumEntriesLog2;

	u8	_pad[104];

	u32	msgProdIdx;
	u32	msgConsIdx;
	u32	msgNumEntriesLog2;
} __packed;

/*
 * Request descriptor.
 *
 * sizeof(RingReqDesc) = 128
 *
 * - context: is a unique identifier of a command. It could normally be any
 *   64bit value, however we currently store it in the serialNumber variable
 *   of struct SCSI_Command, so we have the following restrictions due to the
 *   way this field is handled in the vmkernel storage stack:
 *    * this value can't be 0,
 *    * the upper 32bit need to be 0 since serialNumber is as a u32.
 *   Currently tracked as PR 292060.
 * - dataLen: contains the total number of bytes that need to be transferred.
 * - dataAddr:
 *   * if PVSCSI_FLAG_CMD_WITH_SG_LIST is set: dataAddr is the PA of the first
 *     s/g table segment, each s/g segment is entirely contained on a single
 *     page of physical memory,
 *   * if PVSCSI_FLAG_CMD_WITH_SG_LIST is NOT set, then dataAddr is the PA of
 *     the buffer used for the DMA transfer,
 * - flags:
 *   * PVSCSI_FLAG_CMD_WITH_SG_LIST: see dataAddr above,
 *   * PVSCSI_FLAG_CMD_DIR_NONE: no DMA involved,
 *   * PVSCSI_FLAG_CMD_DIR_TOHOST: transfer from device to main memory,
 *   * PVSCSI_FLAG_CMD_DIR_TODEVICE: transfer from main memory to device,
 *   * PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB: reserved to handle CDBs larger than
 *     16bytes. To be specified.
 * - vcpuHint: vcpuId of the processor that will be most likely waiting for the
 *   completion of the i/o. For guest OSes that use lowest priority message
 *   delivery mode (such as windows), we use this "hint" to deliver the
 *   completion action to the proper vcpu. For now, we can use the vcpuId of
 *   the processor that initiated the i/o as a likely candidate for the vcpu
 *   that will be waiting for the completion..
 * - bus should be 0: we currently only support bus 0 for now.
 * - unused should be zero'd.
 */

#define PVSCSI_FLAG_CMD_WITH_SG_LIST        (1 << 0)
#define PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB     (1 << 1)
#define PVSCSI_FLAG_CMD_DIR_NONE            (1 << 2)
#define PVSCSI_FLAG_CMD_DIR_TOHOST          (1 << 3)
#define PVSCSI_FLAG_CMD_DIR_TODEVICE        (1 << 4)

struct PVSCSIRingReqDesc {
	u64	context;
	u64	dataAddr;
	u64	dataLen;
	u64	senseAddr;
	u32	senseLen;
	u32	flags;
	u8	cdb[16];
	u8	cdbLen;
	u8	lun[8];
	u8	tag;
	u8	bus;
	u8	target;
	u8	vcpuHint;
	u8	unused[59];
} __packed;

/*
 * Scatter-gather list management.
 *
 * As described above, when PVSCSI_FLAG_CMD_WITH_SG_LIST is set in the
 * RingReqDesc.flags, then RingReqDesc.dataAddr is the PA of the first s/g
 * table segment.
 *
 * - each segment of the s/g table contain a succession of struct
 *   PVSCSISGElement.
 * - each segment is entirely contained on a single physical page of memory.
 * - a "chain" s/g element has the flag PVSCSI_SGE_FLAG_CHAIN_ELEMENT set in
 *   PVSCSISGElement.flags and in this case:
 *     * addr is the PA of the next s/g segment,
 *     * length is undefined, assumed to be 0.
 */

struct PVSCSISGElement {
	u64	addr;
	u32	length;
	u32	flags;
} __packed;

/*
 * Completion descriptor.
 *
 * sizeof(RingCmpDesc) = 32
 *
 * - context: identifier of the command. The same thing that was specified
 *   under "context" as part of struct RingReqDesc at initiation time,
 * - dataLen: number of bytes transferred for the actual i/o operation,
 * - senseLen: number of bytes written into the sense buffer,
 * - hostStatus: adapter status,
 * - scsiStatus: device status,
 * - _pad should be zero.
 */

struct PVSCSIRingCmpDesc {
	u64	context;
	u64	dataLen;
	u32	senseLen;
	u16	hostStatus;
	u16	scsiStatus;
	u32	_pad[2];
} __packed;

struct PVSCSIConfigPageHeader {
	u32 pageNum;
	u16 numDwords;
	u16 hostStatus;
	u16 scsiStatus;
	u16 reserved[3];
} __packed;

struct PVSCSIConfigPageController {
	struct PVSCSIConfigPageHeader header;
	u64 nodeWWN; /* Device name as defined in the SAS spec. */
	u16 manufacturer[64];
	u16 serialNumber[64];
	u16 opromVersion[32];
	u16 hwVersion[32];
	u16 firmwareVersion[32];
	u32 numPhys;
	u8  useConsecutivePhyWWNs;
	u8  reserved[3];
} __packed;

/*
 * Interrupt status / IRQ bits.
 */

#define PVSCSI_INTR_CMPL_0                 (1 << 0)
#define PVSCSI_INTR_CMPL_1                 (1 << 1)
#define PVSCSI_INTR_CMPL_MASK              MASK(2)

#define PVSCSI_INTR_MSG_0                  (1 << 2)
#define PVSCSI_INTR_MSG_1                  (1 << 3)
#define PVSCSI_INTR_MSG_MASK               (MASK(2) << 2)

#define PVSCSI_INTR_ALL_SUPPORTED          MASK(4)

/*
 * Number of MSI-X vectors supported.
 */
#define PVSCSI_MAX_INTRS        24

/*
 * Enumeration of supported MSI-X vectors
 */
#define PVSCSI_VECTOR_COMPLETION   0

/*
 * Misc constants for the rings.
 */

#define PVSCSI_MAX_NUM_PAGES_REQ_RING   PVSCSI_SETUP_RINGS_MAX_NUM_PAGES
#define PVSCSI_MAX_NUM_PAGES_CMP_RING   PVSCSI_SETUP_RINGS_MAX_NUM_PAGES
#define PVSCSI_MAX_NUM_PAGES_MSG_RING   PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES

#define PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE \
				(PAGE_SIZE / sizeof(struct PVSCSIRingReqDesc))

#define PVSCSI_MAX_REQ_QUEUE_DEPTH \
	(PVSCSI_MAX_NUM_PAGES_REQ_RING * PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE)

#define PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES     1
#define PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES 1
#define PVSCSI_MEM_SPACE_MISC_NUM_PAGES        2
#define PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES     2
#define PVSCSI_MEM_SPACE_MSIX_NUM_PAGES        2

enum PVSCSIMemSpace {
	PVSCSI_MEM_SPACE_COMMAND_PAGE		= 0,
	PVSCSI_MEM_SPACE_INTR_STATUS_PAGE	= 1,
	PVSCSI_MEM_SPACE_MISC_PAGE		= 2,
	PVSCSI_MEM_SPACE_KICK_IO_PAGE		= 4,
	PVSCSI_MEM_SPACE_MSIX_TABLE_PAGE	= 6,
	PVSCSI_MEM_SPACE_MSIX_PBA_PAGE		= 7,
};

#define PVSCSI_MEM_SPACE_NUM_PAGES \
	(PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES +       \
	 PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES +   \
	 PVSCSI_MEM_SPACE_MISC_NUM_PAGES +          \
	 PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES +       \
	 PVSCSI_MEM_SPACE_MSIX_NUM_PAGES)

#define PVSCSI_MEM_SPACE_SIZE        (PVSCSI_MEM_SPACE_NUM_PAGES * PAGE_SIZE)

#endif /* _VMW_PVSCSI_H_ */
Commit	Line	Data
851b1642 AK	1	/*
	2	* VMware PVSCSI header file
	3	*
	4	* Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved.
	5	*
	6	* This program is free software; you can redistribute it and/or modify it
	7	* under the terms of the GNU General Public License as published by the
	8	* Free Software Foundation; version 2 of the License and no later version.
	9	*
	10	* This program is distributed in the hope that it will be useful, but
	11	* WITHOUT ANY WARRANTY; without even the implied warranty of
	12	* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
	13	* NON INFRINGEMENT. See the GNU General Public License for more
	14	* details.
	15	*
	16	* You should have received a copy of the GNU General Public License
	17	* along with this program; if not, write to the Free Software
	18	* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
	19	*
a9310735	20	* Maintained by: Arvind Kumar <arvindkumar@vmware.com>
851b1642 AK	21	*
	22	*/
	23
	24	#ifndef _VMW_PVSCSI_H_
	25	#define _VMW_PVSCSI_H_
	26
	27	#include <linux/types.h>
	28
a9310735	29	#define PVSCSI_DRIVER_VERSION_STRING "1.0.2.0-k"
851b1642 AK	30
	31	#define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128
	32
	33	#define MASK(n) ((1 << (n)) - 1) /* make an n-bit mask */
	34
	35	#define PCI_VENDOR_ID_VMWARE 0x15AD
	36	#define PCI_DEVICE_ID_VMWARE_PVSCSI 0x07C0
	37
	38	/*
	39	* host adapter status/error codes
	40	*/
	41	enum HostBusAdapterStatus {
a9310735 AK	42	BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */
	43	BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a,
	44	BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b,
	45	BTSTAT_DATA_UNDERRUN = 0x0c,
	46	BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */
	47	BTSTAT_DATARUN = 0x12, /* data overrun/underrun */
	48	BTSTAT_BUSFREE = 0x13, /* unexpected bus free */
	49	BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence
	50	* requested by target */
	51	BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from
	52	* first CCB */
	53	BTSTAT_INVPARAM = 0x1a, /* invalid parameter in CCB or segment
	54	* list */
	55	BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */
	56	BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message
	57	* rejected by target */
	58	BTSTAT_BADMSG = 0x1d, /* unsupported message received by the
	59	* host adapter */
	60	BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */
	61	BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN,
	62	* sent a SCSI RST */
	63	BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */
	64	BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI
	65	* RST */
	66	BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly
	67	* (w/o tag) */
	68	BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */
	69	BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */
	70	BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */
	71	BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */
	72	BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */
	73	};
	74
	75	/*
	76	* SCSI device status values.
	77	*/
	78	enum ScsiDeviceStatus {
	79	SDSTAT_GOOD = 0x00, /* No errors. */
	80	SDSTAT_CHECK = 0x02, /* Check condition. */
851b1642 AK	81	};
	82
	83	/*
	84	* Register offsets.
	85	*
	86	* These registers are accessible both via i/o space and mm i/o.
	87	*/
	88
	89	enum PVSCSIRegOffset {
	90	PVSCSI_REG_OFFSET_COMMAND = 0x0,
	91	PVSCSI_REG_OFFSET_COMMAND_DATA = 0x4,
	92	PVSCSI_REG_OFFSET_COMMAND_STATUS = 0x8,
	93	PVSCSI_REG_OFFSET_LAST_STS_0 = 0x100,
	94	PVSCSI_REG_OFFSET_LAST_STS_1 = 0x104,
	95	PVSCSI_REG_OFFSET_LAST_STS_2 = 0x108,
	96	PVSCSI_REG_OFFSET_LAST_STS_3 = 0x10c,
	97	PVSCSI_REG_OFFSET_INTR_STATUS = 0x100c,
	98	PVSCSI_REG_OFFSET_INTR_MASK = 0x2010,
	99	PVSCSI_REG_OFFSET_KICK_NON_RW_IO = 0x3014,
	100	PVSCSI_REG_OFFSET_DEBUG = 0x3018,
	101	PVSCSI_REG_OFFSET_KICK_RW_IO = 0x4018,
	102	};
	103
	104	/*
	105	* Virtual h/w commands.
	106	*/
	107
	108	enum PVSCSICommands {
	109	PVSCSI_CMD_FIRST = 0, /* has to be first */
	110
	111	PVSCSI_CMD_ADAPTER_RESET = 1,
	112	PVSCSI_CMD_ISSUE_SCSI = 2,
	113	PVSCSI_CMD_SETUP_RINGS = 3,
	114	PVSCSI_CMD_RESET_BUS = 4,
	115	PVSCSI_CMD_RESET_DEVICE = 5,
	116	PVSCSI_CMD_ABORT_CMD = 6,
	117	PVSCSI_CMD_CONFIG = 7,
	118	PVSCSI_CMD_SETUP_MSG_RING = 8,
	119	PVSCSI_CMD_DEVICE_UNPLUG = 9,
	120
	121	PVSCSI_CMD_LAST = 10 /* has to be last */
	122	};
	123
	124	/*
	125	* Command descriptor for PVSCSI_CMD_RESET_DEVICE --
	126	*/
	127
	128	struct PVSCSICmdDescResetDevice {
	129	u32 target;
	130	u8 lun[8];
	131	} __packed;
	132
a9310735 AK	133	/*
	134	* Command descriptor for PVSCSI_CMD_CONFIG --
	135	*/
	136
	137	struct PVSCSICmdDescConfigCmd {
	138	u64 cmpAddr;
	139	u64 configPageAddress;
	140	u32 configPageNum;
	141	u32 _pad;
	142	} __packed;
	143
	144	enum PVSCSIConfigPageType {
	145	PVSCSI_CONFIG_PAGE_CONTROLLER = 0x1958,
	146	PVSCSI_CONFIG_PAGE_PHY = 0x1959,
	147	PVSCSI_CONFIG_PAGE_DEVICE = 0x195a,
	148	};
	149
	150	enum PVSCSIConfigPageAddressType {
	151	PVSCSI_CONFIG_CONTROLLER_ADDRESS = 0x2120,
	152	PVSCSI_CONFIG_BUSTARGET_ADDRESS = 0x2121,
	153	PVSCSI_CONFIG_PHY_ADDRESS = 0x2122,
	154	};
	155
851b1642 AK	156	/*
	157	* Command descriptor for PVSCSI_CMD_ABORT_CMD --
	158	*
	159	* - currently does not support specifying the LUN.
	160	* - _pad should be 0.
	161	*/
	162
	163	struct PVSCSICmdDescAbortCmd {
	164	u64 context;
	165	u32 target;
	166	u32 _pad;
	167	} __packed;
	168
	169	/*
	170	* Command descriptor for PVSCSI_CMD_SETUP_RINGS --
	171	*
	172	* Notes:
	173	* - reqRingNumPages and cmpRingNumPages need to be power of two.
	174	* - reqRingNumPages and cmpRingNumPages need to be different from 0,
	175	* - reqRingNumPages and cmpRingNumPages need to be inferior to
	176	* PVSCSI_SETUP_RINGS_MAX_NUM_PAGES.
	177	*/
	178
	179	#define PVSCSI_SETUP_RINGS_MAX_NUM_PAGES 32
	180	struct PVSCSICmdDescSetupRings {
	181	u32 reqRingNumPages;
	182	u32 cmpRingNumPages;
	183	u64 ringsStatePPN;
	184	u64 reqRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES];
	185	u64 cmpRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES];
	186	} __packed;
	187
	188	/*
	189	* Command descriptor for PVSCSI_CMD_SETUP_MSG_RING --
	190	*
	191	* Notes:
	192	* - this command was not supported in the initial revision of the h/w
	193	* interface. Before using it, you need to check that it is supported by
	194	* writing PVSCSI_CMD_SETUP_MSG_RING to the 'command' register, then
	195	* immediately after read the 'command status' register:
	196	* * a value of -1 means that the cmd is NOT supported,
	197	* * a value != -1 means that the cmd IS supported.
	198	* If it's supported the 'command status' register should return:
	199	* sizeof(PVSCSICmdDescSetupMsgRing) / sizeof(u32).
	200	* - this command should be issued _after_ the usual SETUP_RINGS so that the
	201	* RingsState page is already setup. If not, the command is a nop.
	202	* - numPages needs to be a power of two,
	203	* - numPages needs to be different from 0,
	204	* - _pad should be zero.
	205	*/
	206
	207	#define PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES 16
	208
	209	struct PVSCSICmdDescSetupMsgRing {
	210	u32 numPages;
	211	u32 _pad;
	212	u64 ringPPNs[PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES];
	213	} __packed;
	214
	215	enum PVSCSIMsgType {
	216	PVSCSI_MSG_DEV_ADDED = 0,
	217	PVSCSI_MSG_DEV_REMOVED = 1,
	218	PVSCSI_MSG_LAST = 2,
	219	};
220
221	/*
222	* Msg descriptor.
223	*
224	* sizeof(struct PVSCSIRingMsgDesc) == 128.
225	*
226	* - type is of type enum PVSCSIMsgType.
227	* - the content of args depend on the type of event being delivered.
228	*/
229
230	struct PVSCSIRingMsgDesc {
231	u32 type;
232	u32 args[31];
233	} __packed;
234
235	struct PVSCSIMsgDescDevStatusChanged {
236	u32 type; /* PVSCSI_MSG_DEV _ADDED / _REMOVED */
237	u32 bus;
238	u32 target;
239	u8 lun[8];
240	u32 pad[27];
241	} __packed;
242
243	/*
244	* Rings state.
245	*
246	* - the fields:
247	* . msgProdIdx,
248	* . msgConsIdx,
249	* . msgNumEntriesLog2,
250	* .. are only used once the SETUP_MSG_RING cmd has been issued.
251	* - '_pad' helps to ensure that the msg related fields are on their own
252	* cache-line.
253	*/
254
255	struct PVSCSIRingsState {
256	u32 reqProdIdx;
257	u32 reqConsIdx;
258	u32 reqNumEntriesLog2;
259
260	u32 cmpProdIdx;
261	u32 cmpConsIdx;
262	u32 cmpNumEntriesLog2;
263
264	u8 _pad[104];
265
266	u32 msgProdIdx;
267	u32 msgConsIdx;
268	u32 msgNumEntriesLog2;
269	} __packed;
270
271	/*
272	* Request descriptor.
273	*
274	* sizeof(RingReqDesc) = 128
275	*
276	* - context: is a unique identifier of a command. It could normally be any
277	* 64bit value, however we currently store it in the serialNumber variable
278	* of struct SCSI_Command, so we have the following restrictions due to the
279	* way this field is handled in the vmkernel storage stack:
280	* * this value can't be 0,
281	* * the upper 32bit need to be 0 since serialNumber is as a u32.
282	* Currently tracked as PR 292060.
283	* - dataLen: contains the total number of bytes that need to be transferred.
284	* - dataAddr:
285	* * if PVSCSI_FLAG_CMD_WITH_SG_LIST is set: dataAddr is the PA of the first
286	* s/g table segment, each s/g segment is entirely contained on a single
287	* page of physical memory,
288	* * if PVSCSI_FLAG_CMD_WITH_SG_LIST is NOT set, then dataAddr is the PA of
289	* the buffer used for the DMA transfer,
290	* - flags:
291	* * PVSCSI_FLAG_CMD_WITH_SG_LIST: see dataAddr above,
292	* * PVSCSI_FLAG_CMD_DIR_NONE: no DMA involved,
293	* * PVSCSI_FLAG_CMD_DIR_TOHOST: transfer from device to main memory,
294	* * PVSCSI_FLAG_CMD_DIR_TODEVICE: transfer from main memory to device,
295	* * PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB: reserved to handle CDBs larger than
296	* 16bytes. To be specified.
297	* - vcpuHint: vcpuId of the processor that will be most likely waiting for the
298	* completion of the i/o. For guest OSes that use lowest priority message
299	* delivery mode (such as windows), we use this "hint" to deliver the
300	* completion action to the proper vcpu. For now, we can use the vcpuId of
301	* the processor that initiated the i/o as a likely candidate for the vcpu
302	* that will be waiting for the completion..
303	* - bus should be 0: we currently only support bus 0 for now.
304	* - unused should be zero'd.
305	*/
306
307	#define PVSCSI_FLAG_CMD_WITH_SG_LIST (1 << 0)
308	#define PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB (1 << 1)
309	#define PVSCSI_FLAG_CMD_DIR_NONE (1 << 2)
310	#define PVSCSI_FLAG_CMD_DIR_TOHOST (1 << 3)
311	#define PVSCSI_FLAG_CMD_DIR_TODEVICE (1 << 4)
312
313	struct PVSCSIRingReqDesc {
314	u64 context;
315	u64 dataAddr;
316	u64 dataLen;
317	u64 senseAddr;
318	u32 senseLen;
319	u32 flags;
320	u8 cdb[16];
321	u8 cdbLen;
322	u8 lun[8];
323	u8 tag;
324	u8 bus;
325	u8 target;
326	u8 vcpuHint;
327	u8 unused[59];
328	} __packed;
329
330	/*
331	* Scatter-gather list management.
332	*
333	* As described above, when PVSCSI_FLAG_CMD_WITH_SG_LIST is set in the
334	* RingReqDesc.flags, then RingReqDesc.dataAddr is the PA of the first s/g
335	* table segment.
336	*
337	* - each segment of the s/g table contain a succession of struct
338	* PVSCSISGElement.
339	* - each segment is entirely contained on a single physical page of memory.
340	* - a "chain" s/g element has the flag PVSCSI_SGE_FLAG_CHAIN_ELEMENT set in
341	* PVSCSISGElement.flags and in this case:
342	* * addr is the PA of the next s/g segment,
343	* * length is undefined, assumed to be 0.
344	*/
345
346	struct PVSCSISGElement {
347	u64 addr;
348	u32 length;
349	u32 flags;
350	} __packed;
351
352	/*
353	* Completion descriptor.
354	*
355	* sizeof(RingCmpDesc) = 32
356	*
357	* - context: identifier of the command. The same thing that was specified
358	* under "context" as part of struct RingReqDesc at initiation time,
359	* - dataLen: number of bytes transferred for the actual i/o operation,
360	* - senseLen: number of bytes written into the sense buffer,
361	* - hostStatus: adapter status,
362	* - scsiStatus: device status,
363	* - _pad should be zero.
364	*/
365
366	struct PVSCSIRingCmpDesc {
367	u64 context;
368	u64 dataLen;
369	u32 senseLen;
370	u16 hostStatus;
371	u16 scsiStatus;
372	u32 _pad[2];
373	} __packed;
374
a9310735 AK	375	struct PVSCSIConfigPageHeader {
	376	u32 pageNum;
	377	u16 numDwords;
	378	u16 hostStatus;
	379	u16 scsiStatus;
	380	u16 reserved[3];
	381	} __packed;
	382
	383	struct PVSCSIConfigPageController {
	384	struct PVSCSIConfigPageHeader header;
	385	u64 nodeWWN; /* Device name as defined in the SAS spec. */
	386	u16 manufacturer[64];
	387	u16 serialNumber[64];
	388	u16 opromVersion[32];
	389	u16 hwVersion[32];
	390	u16 firmwareVersion[32];
	391	u32 numPhys;
	392	u8 useConsecutivePhyWWNs;
	393	u8 reserved[3];
	394	} __packed;
	395
851b1642 AK	396	/*
	397	* Interrupt status / IRQ bits.
	398	*/
	399
	400	#define PVSCSI_INTR_CMPL_0 (1 << 0)
	401	#define PVSCSI_INTR_CMPL_1 (1 << 1)
	402	#define PVSCSI_INTR_CMPL_MASK MASK(2)
	403
	404	#define PVSCSI_INTR_MSG_0 (1 << 2)
	405	#define PVSCSI_INTR_MSG_1 (1 << 3)
	406	#define PVSCSI_INTR_MSG_MASK (MASK(2) << 2)
	407
	408	#define PVSCSI_INTR_ALL_SUPPORTED MASK(4)
	409
	410	/*
	411	* Number of MSI-X vectors supported.
	412	*/
	413	#define PVSCSI_MAX_INTRS 24
	414
	415	/*
	416	* Enumeration of supported MSI-X vectors
	417	*/
	418	#define PVSCSI_VECTOR_COMPLETION 0
	419
	420	/*
	421	* Misc constants for the rings.
	422	*/
	423
	424	#define PVSCSI_MAX_NUM_PAGES_REQ_RING PVSCSI_SETUP_RINGS_MAX_NUM_PAGES
	425	#define PVSCSI_MAX_NUM_PAGES_CMP_RING PVSCSI_SETUP_RINGS_MAX_NUM_PAGES
	426	#define PVSCSI_MAX_NUM_PAGES_MSG_RING PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES
	427
	428	#define PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE \
	429	(PAGE_SIZE / sizeof(struct PVSCSIRingReqDesc))
	430
	431	#define PVSCSI_MAX_REQ_QUEUE_DEPTH \
	432	(PVSCSI_MAX_NUM_PAGES_REQ_RING * PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE)
	433
	434	#define PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES 1
	435	#define PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES 1
	436	#define PVSCSI_MEM_SPACE_MISC_NUM_PAGES 2
	437	#define PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES 2
	438	#define PVSCSI_MEM_SPACE_MSIX_NUM_PAGES 2
	439
	440	enum PVSCSIMemSpace {
	441	PVSCSI_MEM_SPACE_COMMAND_PAGE = 0,
	442	PVSCSI_MEM_SPACE_INTR_STATUS_PAGE = 1,
	443	PVSCSI_MEM_SPACE_MISC_PAGE = 2,
	444	PVSCSI_MEM_SPACE_KICK_IO_PAGE = 4,
	445	PVSCSI_MEM_SPACE_MSIX_TABLE_PAGE = 6,
	446	PVSCSI_MEM_SPACE_MSIX_PBA_PAGE = 7,
	447	};
	448
	449	#define PVSCSI_MEM_SPACE_NUM_PAGES \
	450	(PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES + \
	451	PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES + \
	452	PVSCSI_MEM_SPACE_MISC_NUM_PAGES + \
	453	PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES + \
	454	PVSCSI_MEM_SPACE_MSIX_NUM_PAGES)
	455
	456	#define PVSCSI_MEM_SPACE_SIZE (PVSCSI_MEM_SPACE_NUM_PAGES * PAGE_SIZE)
	457
	458	#endif /* _VMW_PVSCSI_H_ */