Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /*====================================================================== |
2 | ||
3 | A driver for PCMCIA serial devices | |
4 | ||
5 | serial_cs.c 1.134 2002/05/04 05:48:53 | |
6 | ||
7 | The contents of this file are subject to the Mozilla Public | |
8 | License Version 1.1 (the "License"); you may not use this file | |
9 | except in compliance with the License. You may obtain a copy of | |
10 | the License at http://www.mozilla.org/MPL/ | |
11 | ||
12 | Software distributed under the License is distributed on an "AS | |
13 | IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or | |
14 | implied. See the License for the specific language governing | |
15 | rights and limitations under the License. | |
16 | ||
17 | The initial developer of the original code is David A. Hinds | |
18 | <dahinds@users.sourceforge.net>. Portions created by David A. Hinds | |
19 | are Copyright (C) 1999 David A. Hinds. All Rights Reserved. | |
20 | ||
21 | Alternatively, the contents of this file may be used under the | |
22 | terms of the GNU General Public License version 2 (the "GPL"), in which | |
23 | case the provisions of the GPL are applicable instead of the | |
24 | above. If you wish to allow the use of your version of this file | |
25 | only under the terms of the GPL and not to allow others to use | |
26 | your version of this file under the MPL, indicate your decision | |
27 | by deleting the provisions above and replace them with the notice | |
28 | and other provisions required by the GPL. If you do not delete | |
29 | the provisions above, a recipient may use your version of this | |
30 | file under either the MPL or the GPL. | |
31 | ||
32 | ======================================================================*/ | |
33 | ||
34 | #include <linux/module.h> | |
35 | #include <linux/moduleparam.h> | |
36 | #include <linux/kernel.h> | |
37 | #include <linux/init.h> | |
1da177e4 LT |
38 | #include <linux/ptrace.h> |
39 | #include <linux/slab.h> | |
40 | #include <linux/string.h> | |
41 | #include <linux/timer.h> | |
42 | #include <linux/serial_core.h> | |
30bac7aa | 43 | #include <linux/delay.h> |
1da177e4 LT |
44 | #include <linux/major.h> |
45 | #include <asm/io.h> | |
46 | #include <asm/system.h> | |
47 | ||
1da177e4 LT |
48 | #include <pcmcia/cistpl.h> |
49 | #include <pcmcia/ciscode.h> | |
50 | #include <pcmcia/ds.h> | |
51 | #include <pcmcia/cisreg.h> | |
52 | ||
53 | #include "8250.h" | |
54 | ||
1da177e4 LT |
55 | |
56 | /*====================================================================*/ | |
57 | ||
58 | /* Parameters that can be set with 'insmod' */ | |
59 | ||
60 | /* Enable the speaker? */ | |
61 | static int do_sound = 1; | |
62 | /* Skip strict UART tests? */ | |
63 | static int buggy_uart; | |
64 | ||
65 | module_param(do_sound, int, 0444); | |
66 | module_param(buggy_uart, int, 0444); | |
67 | ||
68 | /*====================================================================*/ | |
69 | ||
70 | /* Table of multi-port card ID's */ | |
71 | ||
1fbbac4b | 72 | struct serial_quirk { |
a8244b56 RK |
73 | unsigned int manfid; |
74 | unsigned int prodid; | |
1da177e4 | 75 | int multi; /* 1 = multifunction, > 1 = # ports */ |
efd92dfa | 76 | void (*config)(struct pcmcia_device *); |
f3d10688 | 77 | void (*setup)(struct pcmcia_device *, struct uart_port *); |
7ef057fa | 78 | void (*wakeup)(struct pcmcia_device *); |
eee3a883 | 79 | int (*post)(struct pcmcia_device *); |
1da177e4 LT |
80 | }; |
81 | ||
eee3a883 RK |
82 | struct serial_info { |
83 | struct pcmcia_device *p_dev; | |
84 | int ndev; | |
85 | int multi; | |
86 | int slave; | |
87 | int manfid; | |
88 | int prodid; | |
89 | int c950ctrl; | |
eee3a883 RK |
90 | int line[4]; |
91 | const struct serial_quirk *quirk; | |
92 | }; | |
93 | ||
94 | struct serial_cfg_mem { | |
95 | tuple_t tuple; | |
96 | cisparse_t parse; | |
97 | u_char buf[256]; | |
98 | }; | |
99 | ||
f3d10688 RK |
100 | /* |
101 | * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6" | |
102 | * manfid 0x0160, 0x0104 | |
103 | * This card appears to have a 14.7456MHz clock. | |
104 | */ | |
6f4567c8 TM |
105 | /* Generic Modem: MD55x (GPRS/EDGE) have |
106 | * Elan VPU16551 UART with 14.7456MHz oscillator | |
107 | * manfid 0x015D, 0x4C45 | |
108 | */ | |
f3d10688 RK |
109 | static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port) |
110 | { | |
111 | port->uartclk = 14745600; | |
112 | } | |
113 | ||
eee3a883 RK |
114 | static int quirk_post_ibm(struct pcmcia_device *link) |
115 | { | |
1d5cc192 | 116 | u8 val; |
9ec0bf41 DB |
117 | int ret; |
118 | ||
1d5cc192 | 119 | ret = pcmcia_read_config_byte(link, 0x800, &val); |
9ec0bf41 DB |
120 | if (ret) |
121 | goto failed; | |
eee3a883 | 122 | |
1d5cc192 | 123 | ret = pcmcia_write_config_byte(link, 0x800, val | 1); |
9ec0bf41 DB |
124 | if (ret) |
125 | goto failed; | |
eee3a883 RK |
126 | return 0; |
127 | ||
9ec0bf41 | 128 | failed: |
eee3a883 RK |
129 | return -ENODEV; |
130 | } | |
131 | ||
20f13049 RK |
132 | /* |
133 | * Nokia cards are not really multiport cards. Shouldn't this | |
134 | * be handled by setting the quirk entry .multi = 0 | 1 ? | |
135 | */ | |
136 | static void quirk_config_nokia(struct pcmcia_device *link) | |
137 | { | |
138 | struct serial_info *info = link->priv; | |
139 | ||
140 | if (info->multi > 1) | |
141 | info->multi = 1; | |
142 | } | |
143 | ||
7ef057fa RK |
144 | static void quirk_wakeup_oxsemi(struct pcmcia_device *link) |
145 | { | |
146 | struct serial_info *info = link->priv; | |
147 | ||
18c576f9 PM |
148 | if (info->c950ctrl) |
149 | outb(12, info->c950ctrl + 1); | |
7ef057fa RK |
150 | } |
151 | ||
152 | /* request_region? oxsemi branch does no request_region too... */ | |
153 | /* | |
154 | * This sequence is needed to properly initialize MC45 attached to OXCF950. | |
155 | * I tried decreasing these msleep()s, but it worked properly (survived | |
156 | * 1000 stop/start operations) with these timeouts (or bigger). | |
157 | */ | |
158 | static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) | |
159 | { | |
160 | struct serial_info *info = link->priv; | |
161 | unsigned int ctrl = info->c950ctrl; | |
162 | ||
163 | outb(0xA, ctrl + 1); | |
164 | msleep(100); | |
165 | outb(0xE, ctrl + 1); | |
166 | msleep(300); | |
167 | outb(0xC, ctrl + 1); | |
168 | msleep(100); | |
169 | outb(0xE, ctrl + 1); | |
170 | msleep(200); | |
171 | outb(0xF, ctrl + 1); | |
172 | msleep(100); | |
173 | outb(0xE, ctrl + 1); | |
174 | msleep(100); | |
175 | outb(0xC, ctrl + 1); | |
176 | } | |
177 | ||
efd92dfa RK |
178 | /* |
179 | * Socket Dual IO: this enables irq's for second port | |
180 | */ | |
181 | static void quirk_config_socket(struct pcmcia_device *link) | |
182 | { | |
183 | struct serial_info *info = link->priv; | |
184 | ||
fc301101 | 185 | if (info->multi) |
1ac71e5a | 186 | link->config_flags |= CONF_ENABLE_ESR; |
efd92dfa RK |
187 | } |
188 | ||
1fbbac4b RK |
189 | static const struct serial_quirk quirks[] = { |
190 | { | |
f3d10688 RK |
191 | .manfid = 0x0160, |
192 | .prodid = 0x0104, | |
193 | .multi = -1, | |
194 | .setup = quirk_setup_brainboxes_0104, | |
6f4567c8 TM |
195 | }, { |
196 | .manfid = 0x015D, | |
197 | .prodid = 0x4C45, | |
198 | .multi = -1, | |
199 | .setup = quirk_setup_brainboxes_0104, | |
f3d10688 | 200 | }, { |
eee3a883 RK |
201 | .manfid = MANFID_IBM, |
202 | .prodid = ~0, | |
203 | .multi = -1, | |
204 | .post = quirk_post_ibm, | |
7ef057fa RK |
205 | }, { |
206 | .manfid = MANFID_INTEL, | |
207 | .prodid = PRODID_INTEL_DUAL_RS232, | |
208 | .multi = 2, | |
209 | }, { | |
210 | .manfid = MANFID_NATINST, | |
211 | .prodid = PRODID_NATINST_QUAD_RS232, | |
212 | .multi = 4, | |
20f13049 RK |
213 | }, { |
214 | .manfid = MANFID_NOKIA, | |
215 | .prodid = ~0, | |
216 | .multi = -1, | |
217 | .config = quirk_config_nokia, | |
eee3a883 | 218 | }, { |
1fbbac4b RK |
219 | .manfid = MANFID_OMEGA, |
220 | .prodid = PRODID_OMEGA_QSP_100, | |
221 | .multi = 4, | |
7ef057fa RK |
222 | }, { |
223 | .manfid = MANFID_OXSEMI, | |
224 | .prodid = ~0, | |
225 | .multi = -1, | |
226 | .wakeup = quirk_wakeup_oxsemi, | |
227 | }, { | |
228 | .manfid = MANFID_POSSIO, | |
229 | .prodid = PRODID_POSSIO_GCC, | |
230 | .multi = -1, | |
231 | .wakeup = quirk_wakeup_possio_gcc, | |
1fbbac4b RK |
232 | }, { |
233 | .manfid = MANFID_QUATECH, | |
234 | .prodid = PRODID_QUATECH_DUAL_RS232, | |
235 | .multi = 2, | |
236 | }, { | |
237 | .manfid = MANFID_QUATECH, | |
238 | .prodid = PRODID_QUATECH_DUAL_RS232_D1, | |
239 | .multi = 2, | |
bb289bc4 SO |
240 | }, { |
241 | .manfid = MANFID_QUATECH, | |
242 | .prodid = PRODID_QUATECH_DUAL_RS232_G, | |
243 | .multi = 2, | |
1fbbac4b RK |
244 | }, { |
245 | .manfid = MANFID_QUATECH, | |
246 | .prodid = PRODID_QUATECH_QUAD_RS232, | |
247 | .multi = 4, | |
248 | }, { | |
249 | .manfid = MANFID_SOCKET, | |
250 | .prodid = PRODID_SOCKET_DUAL_RS232, | |
251 | .multi = 2, | |
efd92dfa RK |
252 | .config = quirk_config_socket, |
253 | }, { | |
254 | .manfid = MANFID_SOCKET, | |
255 | .prodid = ~0, | |
256 | .multi = -1, | |
257 | .config = quirk_config_socket, | |
1fbbac4b | 258 | } |
1da177e4 | 259 | }; |
1da177e4 | 260 | |
16f31113 | 261 | |
15b99ac1 | 262 | static int serial_config(struct pcmcia_device * link); |
1da177e4 | 263 | |
1da177e4 | 264 | |
1da177e4 LT |
265 | /*====================================================================== |
266 | ||
267 | After a card is removed, serial_remove() will unregister | |
268 | the serial device(s), and release the PCMCIA configuration. | |
269 | ||
270 | ======================================================================*/ | |
271 | ||
fba395ee | 272 | static void serial_remove(struct pcmcia_device *link) |
1da177e4 LT |
273 | { |
274 | struct serial_info *info = link->priv; | |
275 | int i; | |
276 | ||
9ec0bf41 | 277 | dev_dbg(&link->dev, "serial_release\n"); |
1da177e4 LT |
278 | |
279 | /* | |
280 | * Recheck to see if the device is still configured. | |
281 | */ | |
e2d40963 DB |
282 | for (i = 0; i < info->ndev; i++) |
283 | serial8250_unregister_port(info->line[i]); | |
1da177e4 | 284 | |
e2d40963 DB |
285 | if (!info->slave) |
286 | pcmcia_disable_device(link); | |
1da177e4 LT |
287 | } |
288 | ||
fba395ee | 289 | static int serial_suspend(struct pcmcia_device *link) |
1da177e4 | 290 | { |
e2d40963 DB |
291 | struct serial_info *info = link->priv; |
292 | int i; | |
1da177e4 | 293 | |
e2d40963 DB |
294 | for (i = 0; i < info->ndev; i++) |
295 | serial8250_suspend_port(info->line[i]); | |
98e4c28b DB |
296 | |
297 | return 0; | |
1da177e4 LT |
298 | } |
299 | ||
fba395ee | 300 | static int serial_resume(struct pcmcia_device *link) |
1da177e4 | 301 | { |
fe59d537 RK |
302 | struct serial_info *info = link->priv; |
303 | int i; | |
1da177e4 | 304 | |
fe59d537 RK |
305 | for (i = 0; i < info->ndev; i++) |
306 | serial8250_resume_port(info->line[i]); | |
7ef057fa | 307 | |
fe59d537 RK |
308 | if (info->quirk && info->quirk->wakeup) |
309 | info->quirk->wakeup(link); | |
98e4c28b DB |
310 | |
311 | return 0; | |
1da177e4 LT |
312 | } |
313 | ||
314 | /*====================================================================== | |
315 | ||
316 | serial_attach() creates an "instance" of the driver, allocating | |
317 | local data structures for one device. The device is registered | |
318 | with Card Services. | |
319 | ||
320 | ======================================================================*/ | |
321 | ||
fba395ee | 322 | static int serial_probe(struct pcmcia_device *link) |
1da177e4 LT |
323 | { |
324 | struct serial_info *info; | |
1da177e4 | 325 | |
9ec0bf41 | 326 | dev_dbg(&link->dev, "serial_attach()\n"); |
1da177e4 LT |
327 | |
328 | /* Create new serial device */ | |
8f31bb39 | 329 | info = kzalloc(sizeof (*info), GFP_KERNEL); |
1da177e4 | 330 | if (!info) |
f8cfa618 | 331 | return -ENOMEM; |
fba395ee | 332 | info->p_dev = link; |
1da177e4 LT |
333 | link->priv = info; |
334 | ||
1ac71e5a | 335 | link->config_flags |= CONF_ENABLE_IRQ; |
fc301101 | 336 | if (do_sound) |
1ac71e5a | 337 | link->config_flags |= CONF_ENABLE_SPKR; |
fc301101 | 338 | |
15b99ac1 | 339 | return serial_config(link); |
1da177e4 LT |
340 | } |
341 | ||
342 | /*====================================================================== | |
343 | ||
344 | This deletes a driver "instance". The device is de-registered | |
345 | with Card Services. If it has been released, all local data | |
346 | structures are freed. Otherwise, the structures will be freed | |
347 | when the device is released. | |
348 | ||
349 | ======================================================================*/ | |
350 | ||
fba395ee | 351 | static void serial_detach(struct pcmcia_device *link) |
1da177e4 LT |
352 | { |
353 | struct serial_info *info = link->priv; | |
1da177e4 | 354 | |
9ec0bf41 | 355 | dev_dbg(&link->dev, "serial_detach\n"); |
1da177e4 | 356 | |
1da177e4 LT |
357 | /* |
358 | * Ensure any outstanding scheduled tasks are completed. | |
359 | */ | |
360 | flush_scheduled_work(); | |
361 | ||
362 | /* | |
363 | * Ensure that the ports have been released. | |
364 | */ | |
365 | serial_remove(link); | |
366 | ||
b4635811 | 367 | /* free bits */ |
1da177e4 LT |
368 | kfree(info); |
369 | } | |
370 | ||
371 | /*====================================================================*/ | |
372 | ||
fba395ee | 373 | static int setup_serial(struct pcmcia_device *handle, struct serial_info * info, |
906da809 | 374 | unsigned int iobase, int irq) |
1da177e4 LT |
375 | { |
376 | struct uart_port port; | |
377 | int line; | |
378 | ||
379 | memset(&port, 0, sizeof (struct uart_port)); | |
380 | port.iobase = iobase; | |
381 | port.irq = irq; | |
382 | port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; | |
383 | port.uartclk = 1843200; | |
dd2e5a15 | 384 | port.dev = &handle->dev; |
1da177e4 LT |
385 | if (buggy_uart) |
386 | port.flags |= UPF_BUGGY_UART; | |
f3d10688 RK |
387 | |
388 | if (info->quirk && info->quirk->setup) | |
389 | info->quirk->setup(handle, &port); | |
390 | ||
1da177e4 LT |
391 | line = serial8250_register_port(&port); |
392 | if (line < 0) { | |
393 | printk(KERN_NOTICE "serial_cs: serial8250_register_port() at " | |
394 | "0x%04lx, irq %d failed\n", (u_long)iobase, irq); | |
395 | return -EINVAL; | |
396 | } | |
397 | ||
398 | info->line[info->ndev] = line; | |
1da177e4 LT |
399 | info->ndev++; |
400 | ||
401 | return 0; | |
402 | } | |
403 | ||
404 | /*====================================================================*/ | |
405 | ||
c494bc6c DB |
406 | static int pfc_config(struct pcmcia_device *p_dev) |
407 | { | |
408 | unsigned int port = 0; | |
409 | struct serial_info *info = p_dev->priv; | |
410 | ||
411 | if ((p_dev->resource[1]->end != 0) && | |
412 | (resource_size(p_dev->resource[1]) == 8)) { | |
413 | port = p_dev->resource[1]->start; | |
414 | info->slave = 1; | |
415 | } else if ((info->manfid == MANFID_OSITECH) && | |
416 | (resource_size(p_dev->resource[0]) == 0x40)) { | |
417 | port = p_dev->resource[0]->start + 0x28; | |
418 | info->slave = 1; | |
419 | } | |
420 | if (info->slave) | |
421 | return setup_serial(p_dev, info, port, p_dev->irq); | |
422 | ||
423 | dev_warn(&p_dev->dev, "no usable port range found, giving up\n"); | |
424 | return -ENODEV; | |
425 | } | |
426 | ||
84e2d340 DB |
427 | static int simple_config_check(struct pcmcia_device *p_dev, |
428 | cistpl_cftable_entry_t *cf, | |
8e2fc39d | 429 | cistpl_cftable_entry_t *dflt, |
ad913c11 | 430 | unsigned int vcc, |
84e2d340 | 431 | void *priv_data) |
1da177e4 | 432 | { |
84e2d340 DB |
433 | static const int size_table[2] = { 8, 16 }; |
434 | int *try = priv_data; | |
435 | ||
436 | if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) | |
e8405f0f | 437 | p_dev->vpp = |
84e2d340 DB |
438 | cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; |
439 | ||
90abdc3b DB |
440 | p_dev->io_lines = ((*try & 0x1) == 0) ? |
441 | 16 : cf->io.flags & CISTPL_IO_LINES_MASK; | |
442 | ||
84e2d340 DB |
443 | if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)]) |
444 | && (cf->io.win[0].base != 0)) { | |
90abdc3b DB |
445 | p_dev->resource[0]->start = cf->io.win[0].base; |
446 | if (!pcmcia_request_io(p_dev)) | |
84e2d340 DB |
447 | return 0; |
448 | } | |
449 | return -EINVAL; | |
1da177e4 LT |
450 | } |
451 | ||
84e2d340 DB |
452 | static int simple_config_check_notpicky(struct pcmcia_device *p_dev, |
453 | cistpl_cftable_entry_t *cf, | |
8e2fc39d | 454 | cistpl_cftable_entry_t *dflt, |
ad913c11 | 455 | unsigned int vcc, |
84e2d340 DB |
456 | void *priv_data) |
457 | { | |
458 | static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; | |
459 | int j; | |
460 | ||
461 | if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { | |
84e2d340 | 462 | for (j = 0; j < 5; j++) { |
90abdc3b DB |
463 | p_dev->resource[0]->start = base[j]; |
464 | p_dev->io_lines = base[j] ? 16 : 3; | |
465 | if (!pcmcia_request_io(p_dev)) | |
84e2d340 DB |
466 | return 0; |
467 | } | |
468 | } | |
469 | return -ENODEV; | |
470 | } | |
1da177e4 | 471 | |
fba395ee | 472 | static int simple_config(struct pcmcia_device *link) |
1da177e4 | 473 | { |
1da177e4 | 474 | struct serial_info *info = link->priv; |
ef313e36 | 475 | int i = -ENODEV, try; |
16f31113 | 476 | |
c494bc6c DB |
477 | link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; |
478 | link->resource[0]->end = 8; | |
1da177e4 | 479 | |
84e2d340 DB |
480 | /* First pass: look for a config entry that looks normal. |
481 | * Two tries: without IO aliases, then with aliases */ | |
482 | for (try = 0; try < 4; try++) | |
483 | if (!pcmcia_loop_config(link, simple_config_check, &try)) | |
484 | goto found_port; | |
485 | ||
1da177e4 LT |
486 | /* Second pass: try to find an entry that isn't picky about |
487 | its base address, then try to grab any standard serial port | |
488 | address, and finally try to get any free port. */ | |
84e2d340 DB |
489 | if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) |
490 | goto found_port; | |
1da177e4 | 491 | |
c494bc6c | 492 | dev_warn(&link->dev, "no usable port range found, giving up\n"); |
84e2d340 | 493 | return -1; |
1da177e4 | 494 | |
84e2d340 | 495 | found_port: |
1da177e4 | 496 | if (info->multi && (info->manfid == MANFID_3COM)) |
7feabb64 | 497 | link->config_index &= ~(0x08); |
efd92dfa RK |
498 | |
499 | /* | |
500 | * Apply any configuration quirks. | |
501 | */ | |
502 | if (info->quirk && info->quirk->config) | |
503 | info->quirk->config(link); | |
504 | ||
1ac71e5a | 505 | i = pcmcia_enable_device(link); |
9ec0bf41 | 506 | if (i != 0) |
1da177e4 | 507 | return -1; |
9a017a91 | 508 | return setup_serial(link, info, link->resource[0]->start, link->irq); |
1da177e4 LT |
509 | } |
510 | ||
84e2d340 DB |
511 | static int multi_config_check(struct pcmcia_device *p_dev, |
512 | cistpl_cftable_entry_t *cf, | |
8e2fc39d | 513 | cistpl_cftable_entry_t *dflt, |
ad913c11 | 514 | unsigned int vcc, |
84e2d340 | 515 | void *priv_data) |
1da177e4 | 516 | { |
84e2d340 DB |
517 | int *base2 = priv_data; |
518 | ||
519 | /* The quad port cards have bad CIS's, so just look for a | |
520 | window larger than 8 ports and assume it will be right */ | |
521 | if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { | |
90abdc3b DB |
522 | p_dev->resource[0]->start = cf->io.win[0].base; |
523 | p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; | |
524 | if (!pcmcia_request_io(p_dev)) { | |
9a017a91 | 525 | *base2 = p_dev->resource[0]->start + 8; |
84e2d340 DB |
526 | return 0; |
527 | } | |
528 | } | |
529 | return -ENODEV; | |
530 | } | |
16f31113 | 531 | |
84e2d340 DB |
532 | static int multi_config_check_notpicky(struct pcmcia_device *p_dev, |
533 | cistpl_cftable_entry_t *cf, | |
8e2fc39d | 534 | cistpl_cftable_entry_t *dflt, |
ad913c11 | 535 | unsigned int vcc, |
84e2d340 DB |
536 | void *priv_data) |
537 | { | |
538 | int *base2 = priv_data; | |
539 | ||
540 | if (cf->io.nwin == 2) { | |
90abdc3b DB |
541 | p_dev->resource[0]->start = cf->io.win[0].base; |
542 | p_dev->resource[1]->start = cf->io.win[1].base; | |
543 | p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; | |
544 | if (!pcmcia_request_io(p_dev)) { | |
9a017a91 | 545 | *base2 = p_dev->resource[1]->start; |
84e2d340 DB |
546 | return 0; |
547 | } | |
548 | } | |
549 | return -ENODEV; | |
550 | } | |
1da177e4 | 551 | |
84e2d340 DB |
552 | static int multi_config(struct pcmcia_device *link) |
553 | { | |
554 | struct serial_info *info = link->priv; | |
555 | int i, base2 = 0; | |
1da177e4 LT |
556 | |
557 | /* First, look for a generic full-sized window */ | |
c494bc6c | 558 | link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; |
90abdc3b | 559 | link->resource[0]->end = info->multi * 8; |
84e2d340 DB |
560 | if (pcmcia_loop_config(link, multi_config_check, &base2)) { |
561 | /* If that didn't work, look for two windows */ | |
90abdc3b | 562 | link->resource[0]->end = link->resource[1]->end = 8; |
1da177e4 | 563 | info->multi = 2; |
84e2d340 DB |
564 | if (pcmcia_loop_config(link, multi_config_check_notpicky, |
565 | &base2)) { | |
c494bc6c | 566 | dev_warn(&link->dev, "no usable port range " |
84e2d340 DB |
567 | "found, giving up\n"); |
568 | return -ENODEV; | |
1da177e4 LT |
569 | } |
570 | } | |
571 | ||
eb14120f | 572 | if (!link->irq) |
c494bc6c | 573 | dev_warn(&link->dev, "no usable IRQ found, continuing...\n"); |
efd92dfa RK |
574 | |
575 | /* | |
576 | * Apply any configuration quirks. | |
577 | */ | |
578 | if (info->quirk && info->quirk->config) | |
579 | info->quirk->config(link); | |
580 | ||
1ac71e5a | 581 | i = pcmcia_enable_device(link); |
9ec0bf41 | 582 | if (i != 0) |
84e2d340 | 583 | return -ENODEV; |
1da177e4 LT |
584 | |
585 | /* The Oxford Semiconductor OXCF950 cards are in fact single-port: | |
30bac7aa PV |
586 | * 8 registers are for the UART, the others are extra registers. |
587 | * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. | |
588 | */ | |
589 | if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && | |
590 | info->prodid == PRODID_POSSIO_GCC)) { | |
591 | int err; | |
592 | ||
7feabb64 DB |
593 | if (link->config_index == 1 || |
594 | link->config_index == 3) { | |
30bac7aa | 595 | err = setup_serial(link, info, base2, |
eb14120f | 596 | link->irq); |
9a017a91 | 597 | base2 = link->resource[0]->start;; |
1da177e4 | 598 | } else { |
9a017a91 | 599 | err = setup_serial(link, info, link->resource[0]->start, |
eb14120f | 600 | link->irq); |
1da177e4 | 601 | } |
30bac7aa | 602 | info->c950ctrl = base2; |
7ef057fa RK |
603 | |
604 | /* | |
605 | * FIXME: We really should wake up the port prior to | |
606 | * handing it over to the serial layer. | |
607 | */ | |
608 | if (info->quirk && info->quirk->wakeup) | |
609 | info->quirk->wakeup(link); | |
610 | ||
84e2d340 | 611 | return 0; |
1da177e4 LT |
612 | } |
613 | ||
9a017a91 | 614 | setup_serial(link, info, link->resource[0]->start, link->irq); |
1da177e4 | 615 | for (i = 0; i < info->multi - 1; i++) |
fba395ee | 616 | setup_serial(link, info, base2 + (8 * i), |
eb14120f | 617 | link->irq); |
84e2d340 | 618 | return 0; |
1da177e4 LT |
619 | } |
620 | ||
6ae3b84d DB |
621 | static int serial_check_for_multi(struct pcmcia_device *p_dev, |
622 | cistpl_cftable_entry_t *cf, | |
623 | cistpl_cftable_entry_t *dflt, | |
624 | unsigned int vcc, | |
625 | void *priv_data) | |
626 | { | |
627 | struct serial_info *info = p_dev->priv; | |
628 | ||
629 | if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0)) | |
630 | info->multi = cf->io.win[0].len >> 3; | |
631 | ||
632 | if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) && | |
633 | (cf->io.win[1].len == 8)) | |
634 | info->multi = 2; | |
635 | ||
636 | return 0; /* break */ | |
637 | } | |
638 | ||
639 | ||
1da177e4 LT |
640 | /*====================================================================== |
641 | ||
642 | serial_config() is scheduled to run after a CARD_INSERTION event | |
643 | is received, to configure the PCMCIA socket, and to make the | |
644 | serial device available to the system. | |
645 | ||
646 | ======================================================================*/ | |
647 | ||
15b99ac1 | 648 | static int serial_config(struct pcmcia_device * link) |
1da177e4 | 649 | { |
1da177e4 | 650 | struct serial_info *info = link->priv; |
6ae3b84d | 651 | int i; |
16f31113 | 652 | |
9ec0bf41 | 653 | dev_dbg(&link->dev, "serial_config\n"); |
f0a3a153 | 654 | |
1da177e4 | 655 | /* Is this a compliant multifunction card? */ |
6ae3b84d | 656 | info->multi = (link->socket->functions > 1); |
1da177e4 LT |
657 | |
658 | /* Is this a multiport card? */ | |
efd50585 DB |
659 | info->manfid = link->manf_id; |
660 | info->prodid = link->card_id; | |
661 | ||
662 | for (i = 0; i < ARRAY_SIZE(quirks); i++) | |
663 | if ((quirks[i].manfid == ~0 || | |
664 | quirks[i].manfid == info->manfid) && | |
665 | (quirks[i].prodid == ~0 || | |
666 | quirks[i].prodid == info->prodid)) { | |
667 | info->quirk = &quirks[i]; | |
668 | break; | |
669 | } | |
1da177e4 LT |
670 | |
671 | /* Another check for dual-serial cards: look for either serial or | |
672 | multifunction cards that ask for appropriate IO port ranges */ | |
1da177e4 | 673 | if ((info->multi == 0) && |
efd50585 | 674 | (link->has_func_id) && |
c494bc6c | 675 | (link->socket->pcmcia_pfc == 0) && |
efd50585 | 676 | ((link->func_id == CISTPL_FUNCID_MULTI) || |
6ae3b84d DB |
677 | (link->func_id == CISTPL_FUNCID_SERIAL))) |
678 | pcmcia_loop_config(link, serial_check_for_multi, info); | |
1da177e4 | 679 | |
1fbbac4b RK |
680 | /* |
681 | * Apply any multi-port quirk. | |
682 | */ | |
683 | if (info->quirk && info->quirk->multi != -1) | |
684 | info->multi = info->quirk->multi; | |
685 | ||
c494bc6c DB |
686 | dev_info(&link->dev, |
687 | "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n", | |
688 | link->manf_id, link->card_id, | |
689 | link->socket->pcmcia_pfc, info->multi, info->quirk); | |
690 | if (link->socket->pcmcia_pfc) | |
691 | i = pfc_config(link); | |
692 | else if (info->multi > 1) | |
a78621bb | 693 | i = multi_config(link); |
1da177e4 | 694 | else |
a78621bb | 695 | i = simple_config(link); |
1da177e4 | 696 | |
a78621bb | 697 | if (i || info->ndev == 0) |
1da177e4 LT |
698 | goto failed; |
699 | ||
eee3a883 RK |
700 | /* |
701 | * Apply any post-init quirk. FIXME: This should really happen | |
702 | * before we register the port, since it might already be in use. | |
703 | */ | |
704 | if (info->quirk && info->quirk->post) | |
705 | if (info->quirk->post(link)) | |
706 | goto failed; | |
1da177e4 | 707 | |
15b99ac1 | 708 | return 0; |
1da177e4 | 709 | |
f0a3a153 | 710 | failed: |
c494bc6c | 711 | dev_warn(&link->dev, "failed to initialize\n"); |
1da177e4 | 712 | serial_remove(link); |
15b99ac1 | 713 | return -ENODEV; |
1da177e4 LT |
714 | } |
715 | ||
325aa29f DB |
716 | static struct pcmcia_device_id serial_ids[] = { |
717 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), | |
718 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), | |
719 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), | |
99ec88f3 AK |
720 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), |
721 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), | |
325aa29f DB |
722 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), |
723 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), | |
724 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), | |
725 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), | |
726 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), | |
727 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), | |
728 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), | |
729 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), | |
730 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), | |
731 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), | |
732 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), | |
733 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), | |
734 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), | |
735 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), | |
736 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), | |
737 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), | |
738 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), | |
739 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), | |
d277ad0e | 740 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), |
1546a713 | 741 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), |
325aa29f DB |
742 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), |
743 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), | |
744 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), | |
745 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), | |
746 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), | |
747 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), | |
40738f3f K |
748 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), |
749 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064), | |
d277ad0e K |
750 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), |
751 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), | |
325aa29f DB |
752 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), |
753 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), | |
754 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), | |
d277ad0e | 755 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), |
33d7959a | 756 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01), |
40738f3f K |
757 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), |
758 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), | |
325aa29f DB |
759 | PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), |
760 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), | |
761 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), | |
762 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), | |
763 | PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), | |
764 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), | |
765 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), | |
766 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), | |
767 | PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), | |
768 | PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), | |
769 | PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), | |
1de9cedf | 770 | PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), |
325aa29f DB |
771 | PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), |
772 | PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), | |
99ec88f3 AK |
773 | PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */ |
774 | PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */ | |
775 | PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */ | |
325aa29f | 776 | PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), |
99ec88f3 | 777 | PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */ |
325aa29f DB |
778 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), |
779 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), | |
780 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), | |
781 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), | |
782 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), | |
99ec88f3 AK |
783 | PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */ |
784 | PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */ | |
785 | PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */ | |
325aa29f DB |
786 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), |
787 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), | |
788 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), | |
789 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), | |
790 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), | |
99ec88f3 AK |
791 | PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */ |
792 | PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */ | |
325aa29f DB |
793 | PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), |
794 | PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), | |
795 | PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), | |
796 | PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), | |
797 | PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), | |
1de9cedf | 798 | PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), |
325aa29f DB |
799 | PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), |
800 | PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), | |
801 | PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), | |
802 | PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), | |
803 | PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), | |
804 | PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), | |
805 | PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), | |
99ec88f3 | 806 | PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b), |
325aa29f | 807 | PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), |
d277ad0e | 808 | PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), |
99ec88f3 | 809 | PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447), |
325aa29f DB |
810 | PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), |
811 | PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), | |
812 | PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), | |
813 | PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), | |
814 | PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), | |
99ec88f3 | 815 | PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41), |
325aa29f DB |
816 | PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), |
817 | PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), | |
bb289bc4 | 818 | PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d), |
99ec88f3 AK |
819 | PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38), |
820 | PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292), | |
531afd64 KK |
821 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"), |
822 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"), | |
823 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), | |
824 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), | |
825 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), | |
8b1d920f | 826 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), |
bf6fda63 KK |
827 | PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), |
828 | PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), | |
f0a3a153 | 829 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"), |
bf6fda63 | 830 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"), |
f0a3a153 KK |
831 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), |
832 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), | |
63ca2d74 | 833 | PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ |
abe88069 | 834 | PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */ |
63ca2d74 KK |
835 | PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ |
836 | PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ | |
837 | PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ | |
531afd64 | 838 | PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"), |
bf6fda63 KK |
839 | PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"), |
840 | PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), | |
841 | PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"), | |
531afd64 | 842 | PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"), |
abe88069 | 843 | PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"), |
44e5e33e TO |
844 | PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b), |
845 | PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83), | |
846 | PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490), | |
847 | PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235), | |
848 | PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3), | |
849 | PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442), | |
850 | PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190), | |
851 | PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262), | |
852 | PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d), | |
853 | PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa), | |
854 | PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903), | |
855 | PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676), | |
856 | PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767), | |
857 | PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), | |
858 | PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), | |
859 | PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), | |
860 | PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), | |
861 | PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc), | |
862 | PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), | |
863 | PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), | |
864 | PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), | |
865 | PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), | |
866 | PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), | |
867 | PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), | |
9d9b7ad7 | 868 | PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b), |
325aa29f DB |
869 | /* too generic */ |
870 | /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ | |
871 | /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ | |
872 | PCMCIA_DEVICE_FUNC_ID(2), | |
873 | PCMCIA_DEVICE_NULL, | |
874 | }; | |
875 | MODULE_DEVICE_TABLE(pcmcia, serial_ids); | |
876 | ||
abe88069 KK |
877 | MODULE_FIRMWARE("cis/PCMLM28.cis"); |
878 | MODULE_FIRMWARE("cis/DP83903.cis"); | |
879 | MODULE_FIRMWARE("cis/3CCFEM556.cis"); | |
880 | MODULE_FIRMWARE("cis/3CXEM556.cis"); | |
881 | MODULE_FIRMWARE("cis/SW_8xx_SER.cis"); | |
882 | MODULE_FIRMWARE("cis/SW_7xx_SER.cis"); | |
883 | MODULE_FIRMWARE("cis/SW_555_SER.cis"); | |
884 | MODULE_FIRMWARE("cis/MT5634ZLX.cis"); | |
885 | MODULE_FIRMWARE("cis/COMpad2.cis"); | |
886 | MODULE_FIRMWARE("cis/COMpad4.cis"); | |
887 | MODULE_FIRMWARE("cis/RS-COM-2P.cis"); | |
888 | ||
1da177e4 LT |
889 | static struct pcmcia_driver serial_cs_driver = { |
890 | .owner = THIS_MODULE, | |
891 | .drv = { | |
892 | .name = "serial_cs", | |
893 | }, | |
f8cfa618 | 894 | .probe = serial_probe, |
cc3b4866 | 895 | .remove = serial_detach, |
325aa29f | 896 | .id_table = serial_ids, |
98e4c28b DB |
897 | .suspend = serial_suspend, |
898 | .resume = serial_resume, | |
1da177e4 LT |
899 | }; |
900 | ||
901 | static int __init init_serial_cs(void) | |
902 | { | |
903 | return pcmcia_register_driver(&serial_cs_driver); | |
904 | } | |
905 | ||
906 | static void __exit exit_serial_cs(void) | |
907 | { | |
908 | pcmcia_unregister_driver(&serial_cs_driver); | |
1da177e4 LT |
909 | } |
910 | ||
911 | module_init(init_serial_cs); | |
912 | module_exit(exit_serial_cs); | |
913 | ||
914 | MODULE_LICENSE("GPL"); |