Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /*====================================================================== |
2 | ||
3 | A driver for PCMCIA serial devices | |
4 | ||
5 | serial_cs.c 1.134 2002/05/04 05:48:53 | |
6 | ||
7 | The contents of this file are subject to the Mozilla Public | |
8 | License Version 1.1 (the "License"); you may not use this file | |
9 | except in compliance with the License. You may obtain a copy of | |
10 | the License at http://www.mozilla.org/MPL/ | |
11 | ||
12 | Software distributed under the License is distributed on an "AS | |
13 | IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or | |
14 | implied. See the License for the specific language governing | |
15 | rights and limitations under the License. | |
16 | ||
17 | The initial developer of the original code is David A. Hinds | |
18 | <dahinds@users.sourceforge.net>. Portions created by David A. Hinds | |
19 | are Copyright (C) 1999 David A. Hinds. All Rights Reserved. | |
20 | ||
21 | Alternatively, the contents of this file may be used under the | |
22 | terms of the GNU General Public License version 2 (the "GPL"), in which | |
23 | case the provisions of the GPL are applicable instead of the | |
24 | above. If you wish to allow the use of your version of this file | |
25 | only under the terms of the GPL and not to allow others to use | |
26 | your version of this file under the MPL, indicate your decision | |
27 | by deleting the provisions above and replace them with the notice | |
28 | and other provisions required by the GPL. If you do not delete | |
29 | the provisions above, a recipient may use your version of this | |
30 | file under either the MPL or the GPL. | |
31 | ||
32 | ======================================================================*/ | |
33 | ||
34 | #include <linux/module.h> | |
35 | #include <linux/moduleparam.h> | |
36 | #include <linux/kernel.h> | |
37 | #include <linux/init.h> | |
38 | #include <linux/sched.h> | |
39 | #include <linux/ptrace.h> | |
40 | #include <linux/slab.h> | |
41 | #include <linux/string.h> | |
42 | #include <linux/timer.h> | |
43 | #include <linux/serial_core.h> | |
30bac7aa | 44 | #include <linux/delay.h> |
1da177e4 LT |
45 | #include <linux/major.h> |
46 | #include <asm/io.h> | |
47 | #include <asm/system.h> | |
48 | ||
1da177e4 LT |
49 | #include <pcmcia/cs_types.h> |
50 | #include <pcmcia/cs.h> | |
51 | #include <pcmcia/cistpl.h> | |
52 | #include <pcmcia/ciscode.h> | |
53 | #include <pcmcia/ds.h> | |
54 | #include <pcmcia/cisreg.h> | |
55 | ||
56 | #include "8250.h" | |
57 | ||
58 | #ifdef PCMCIA_DEBUG | |
59 | static int pc_debug = PCMCIA_DEBUG; | |
60 | module_param(pc_debug, int, 0644); | |
61 | #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) | |
62 | static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)"; | |
63 | #else | |
64 | #define DEBUG(n, args...) | |
65 | #endif | |
66 | ||
67 | /*====================================================================*/ | |
68 | ||
69 | /* Parameters that can be set with 'insmod' */ | |
70 | ||
71 | /* Enable the speaker? */ | |
72 | static int do_sound = 1; | |
73 | /* Skip strict UART tests? */ | |
74 | static int buggy_uart; | |
75 | ||
76 | module_param(do_sound, int, 0444); | |
77 | module_param(buggy_uart, int, 0444); | |
78 | ||
79 | /*====================================================================*/ | |
80 | ||
81 | /* Table of multi-port card ID's */ | |
82 | ||
1fbbac4b | 83 | struct serial_quirk { |
a8244b56 RK |
84 | unsigned int manfid; |
85 | unsigned int prodid; | |
1da177e4 | 86 | int multi; /* 1 = multifunction, > 1 = # ports */ |
efd92dfa | 87 | void (*config)(struct pcmcia_device *); |
f3d10688 | 88 | void (*setup)(struct pcmcia_device *, struct uart_port *); |
7ef057fa | 89 | void (*wakeup)(struct pcmcia_device *); |
eee3a883 | 90 | int (*post)(struct pcmcia_device *); |
1da177e4 LT |
91 | }; |
92 | ||
eee3a883 RK |
93 | struct serial_info { |
94 | struct pcmcia_device *p_dev; | |
95 | int ndev; | |
96 | int multi; | |
97 | int slave; | |
98 | int manfid; | |
99 | int prodid; | |
100 | int c950ctrl; | |
101 | dev_node_t node[4]; | |
102 | int line[4]; | |
103 | const struct serial_quirk *quirk; | |
104 | }; | |
105 | ||
106 | struct serial_cfg_mem { | |
107 | tuple_t tuple; | |
108 | cisparse_t parse; | |
109 | u_char buf[256]; | |
110 | }; | |
111 | ||
f3d10688 RK |
112 | /* |
113 | * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6" | |
114 | * manfid 0x0160, 0x0104 | |
115 | * This card appears to have a 14.7456MHz clock. | |
116 | */ | |
117 | static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port) | |
118 | { | |
119 | port->uartclk = 14745600; | |
120 | } | |
121 | ||
eee3a883 RK |
122 | static int quirk_post_ibm(struct pcmcia_device *link) |
123 | { | |
124 | conf_reg_t reg = { 0, CS_READ, 0x800, 0 }; | |
125 | int last_ret, last_fn; | |
126 | ||
127 | last_ret = pcmcia_access_configuration_register(link, ®); | |
128 | if (last_ret) { | |
129 | last_fn = AccessConfigurationRegister; | |
130 | goto cs_failed; | |
131 | } | |
132 | reg.Action = CS_WRITE; | |
133 | reg.Value = reg.Value | 1; | |
134 | last_ret = pcmcia_access_configuration_register(link, ®); | |
135 | if (last_ret) { | |
136 | last_fn = AccessConfigurationRegister; | |
137 | goto cs_failed; | |
138 | } | |
139 | return 0; | |
140 | ||
141 | cs_failed: | |
142 | cs_error(link, last_fn, last_ret); | |
143 | return -ENODEV; | |
144 | } | |
145 | ||
20f13049 RK |
146 | /* |
147 | * Nokia cards are not really multiport cards. Shouldn't this | |
148 | * be handled by setting the quirk entry .multi = 0 | 1 ? | |
149 | */ | |
150 | static void quirk_config_nokia(struct pcmcia_device *link) | |
151 | { | |
152 | struct serial_info *info = link->priv; | |
153 | ||
154 | if (info->multi > 1) | |
155 | info->multi = 1; | |
156 | } | |
157 | ||
7ef057fa RK |
158 | static void quirk_wakeup_oxsemi(struct pcmcia_device *link) |
159 | { | |
160 | struct serial_info *info = link->priv; | |
161 | ||
162 | outb(12, info->c950ctrl + 1); | |
163 | } | |
164 | ||
165 | /* request_region? oxsemi branch does no request_region too... */ | |
166 | /* | |
167 | * This sequence is needed to properly initialize MC45 attached to OXCF950. | |
168 | * I tried decreasing these msleep()s, but it worked properly (survived | |
169 | * 1000 stop/start operations) with these timeouts (or bigger). | |
170 | */ | |
171 | static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) | |
172 | { | |
173 | struct serial_info *info = link->priv; | |
174 | unsigned int ctrl = info->c950ctrl; | |
175 | ||
176 | outb(0xA, ctrl + 1); | |
177 | msleep(100); | |
178 | outb(0xE, ctrl + 1); | |
179 | msleep(300); | |
180 | outb(0xC, ctrl + 1); | |
181 | msleep(100); | |
182 | outb(0xE, ctrl + 1); | |
183 | msleep(200); | |
184 | outb(0xF, ctrl + 1); | |
185 | msleep(100); | |
186 | outb(0xE, ctrl + 1); | |
187 | msleep(100); | |
188 | outb(0xC, ctrl + 1); | |
189 | } | |
190 | ||
efd92dfa RK |
191 | /* |
192 | * Socket Dual IO: this enables irq's for second port | |
193 | */ | |
194 | static void quirk_config_socket(struct pcmcia_device *link) | |
195 | { | |
196 | struct serial_info *info = link->priv; | |
197 | ||
198 | if (info->multi) { | |
199 | link->conf.Present |= PRESENT_EXT_STATUS; | |
200 | link->conf.ExtStatus = ESR_REQ_ATTN_ENA; | |
201 | } | |
202 | } | |
203 | ||
1fbbac4b RK |
204 | static const struct serial_quirk quirks[] = { |
205 | { | |
f3d10688 RK |
206 | .manfid = 0x0160, |
207 | .prodid = 0x0104, | |
208 | .multi = -1, | |
209 | .setup = quirk_setup_brainboxes_0104, | |
210 | }, { | |
eee3a883 RK |
211 | .manfid = MANFID_IBM, |
212 | .prodid = ~0, | |
213 | .multi = -1, | |
214 | .post = quirk_post_ibm, | |
7ef057fa RK |
215 | }, { |
216 | .manfid = MANFID_INTEL, | |
217 | .prodid = PRODID_INTEL_DUAL_RS232, | |
218 | .multi = 2, | |
219 | }, { | |
220 | .manfid = MANFID_NATINST, | |
221 | .prodid = PRODID_NATINST_QUAD_RS232, | |
222 | .multi = 4, | |
20f13049 RK |
223 | }, { |
224 | .manfid = MANFID_NOKIA, | |
225 | .prodid = ~0, | |
226 | .multi = -1, | |
227 | .config = quirk_config_nokia, | |
eee3a883 | 228 | }, { |
1fbbac4b RK |
229 | .manfid = MANFID_OMEGA, |
230 | .prodid = PRODID_OMEGA_QSP_100, | |
231 | .multi = 4, | |
7ef057fa RK |
232 | }, { |
233 | .manfid = MANFID_OXSEMI, | |
234 | .prodid = ~0, | |
235 | .multi = -1, | |
236 | .wakeup = quirk_wakeup_oxsemi, | |
237 | }, { | |
238 | .manfid = MANFID_POSSIO, | |
239 | .prodid = PRODID_POSSIO_GCC, | |
240 | .multi = -1, | |
241 | .wakeup = quirk_wakeup_possio_gcc, | |
1fbbac4b RK |
242 | }, { |
243 | .manfid = MANFID_QUATECH, | |
244 | .prodid = PRODID_QUATECH_DUAL_RS232, | |
245 | .multi = 2, | |
246 | }, { | |
247 | .manfid = MANFID_QUATECH, | |
248 | .prodid = PRODID_QUATECH_DUAL_RS232_D1, | |
249 | .multi = 2, | |
250 | }, { | |
251 | .manfid = MANFID_QUATECH, | |
252 | .prodid = PRODID_QUATECH_QUAD_RS232, | |
253 | .multi = 4, | |
254 | }, { | |
255 | .manfid = MANFID_SOCKET, | |
256 | .prodid = PRODID_SOCKET_DUAL_RS232, | |
257 | .multi = 2, | |
efd92dfa RK |
258 | .config = quirk_config_socket, |
259 | }, { | |
260 | .manfid = MANFID_SOCKET, | |
261 | .prodid = ~0, | |
262 | .multi = -1, | |
263 | .config = quirk_config_socket, | |
1fbbac4b | 264 | } |
1da177e4 | 265 | }; |
1da177e4 | 266 | |
16f31113 | 267 | |
15b99ac1 | 268 | static int serial_config(struct pcmcia_device * link); |
1da177e4 | 269 | |
1da177e4 | 270 | |
1da177e4 LT |
271 | /*====================================================================== |
272 | ||
273 | After a card is removed, serial_remove() will unregister | |
274 | the serial device(s), and release the PCMCIA configuration. | |
275 | ||
276 | ======================================================================*/ | |
277 | ||
fba395ee | 278 | static void serial_remove(struct pcmcia_device *link) |
1da177e4 LT |
279 | { |
280 | struct serial_info *info = link->priv; | |
281 | int i; | |
282 | ||
1da177e4 LT |
283 | DEBUG(0, "serial_release(0x%p)\n", link); |
284 | ||
285 | /* | |
286 | * Recheck to see if the device is still configured. | |
287 | */ | |
e2d40963 DB |
288 | for (i = 0; i < info->ndev; i++) |
289 | serial8250_unregister_port(info->line[i]); | |
1da177e4 | 290 | |
e2d40963 | 291 | info->p_dev->dev_node = NULL; |
1da177e4 | 292 | |
e2d40963 DB |
293 | if (!info->slave) |
294 | pcmcia_disable_device(link); | |
1da177e4 LT |
295 | } |
296 | ||
fba395ee | 297 | static int serial_suspend(struct pcmcia_device *link) |
1da177e4 | 298 | { |
e2d40963 DB |
299 | struct serial_info *info = link->priv; |
300 | int i; | |
1da177e4 | 301 | |
e2d40963 DB |
302 | for (i = 0; i < info->ndev; i++) |
303 | serial8250_suspend_port(info->line[i]); | |
98e4c28b DB |
304 | |
305 | return 0; | |
1da177e4 LT |
306 | } |
307 | ||
fba395ee | 308 | static int serial_resume(struct pcmcia_device *link) |
1da177e4 | 309 | { |
fe59d537 RK |
310 | struct serial_info *info = link->priv; |
311 | int i; | |
1da177e4 | 312 | |
fe59d537 RK |
313 | for (i = 0; i < info->ndev; i++) |
314 | serial8250_resume_port(info->line[i]); | |
7ef057fa | 315 | |
fe59d537 RK |
316 | if (info->quirk && info->quirk->wakeup) |
317 | info->quirk->wakeup(link); | |
98e4c28b DB |
318 | |
319 | return 0; | |
1da177e4 LT |
320 | } |
321 | ||
322 | /*====================================================================== | |
323 | ||
324 | serial_attach() creates an "instance" of the driver, allocating | |
325 | local data structures for one device. The device is registered | |
326 | with Card Services. | |
327 | ||
328 | ======================================================================*/ | |
329 | ||
fba395ee | 330 | static int serial_probe(struct pcmcia_device *link) |
1da177e4 LT |
331 | { |
332 | struct serial_info *info; | |
1da177e4 LT |
333 | |
334 | DEBUG(0, "serial_attach()\n"); | |
335 | ||
336 | /* Create new serial device */ | |
337 | info = kmalloc(sizeof (*info), GFP_KERNEL); | |
338 | if (!info) | |
f8cfa618 | 339 | return -ENOMEM; |
1da177e4 | 340 | memset(info, 0, sizeof (*info)); |
fba395ee | 341 | info->p_dev = link; |
1da177e4 LT |
342 | link->priv = info; |
343 | ||
344 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; | |
345 | link->io.NumPorts1 = 8; | |
346 | link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; | |
347 | link->irq.IRQInfo1 = IRQ_LEVEL_ID; | |
348 | link->conf.Attributes = CONF_ENABLE_IRQ; | |
349 | if (do_sound) { | |
350 | link->conf.Attributes |= CONF_ENABLE_SPKR; | |
351 | link->conf.Status = CCSR_AUDIO_ENA; | |
352 | } | |
353 | link->conf.IntType = INT_MEMORY_AND_IO; | |
354 | ||
15b99ac1 | 355 | return serial_config(link); |
1da177e4 LT |
356 | } |
357 | ||
358 | /*====================================================================== | |
359 | ||
360 | This deletes a driver "instance". The device is de-registered | |
361 | with Card Services. If it has been released, all local data | |
362 | structures are freed. Otherwise, the structures will be freed | |
363 | when the device is released. | |
364 | ||
365 | ======================================================================*/ | |
366 | ||
fba395ee | 367 | static void serial_detach(struct pcmcia_device *link) |
1da177e4 LT |
368 | { |
369 | struct serial_info *info = link->priv; | |
1da177e4 LT |
370 | |
371 | DEBUG(0, "serial_detach(0x%p)\n", link); | |
372 | ||
1da177e4 LT |
373 | /* |
374 | * Ensure any outstanding scheduled tasks are completed. | |
375 | */ | |
376 | flush_scheduled_work(); | |
377 | ||
378 | /* | |
379 | * Ensure that the ports have been released. | |
380 | */ | |
381 | serial_remove(link); | |
382 | ||
b4635811 | 383 | /* free bits */ |
1da177e4 LT |
384 | kfree(info); |
385 | } | |
386 | ||
387 | /*====================================================================*/ | |
388 | ||
fba395ee | 389 | static int setup_serial(struct pcmcia_device *handle, struct serial_info * info, |
1da177e4 LT |
390 | kio_addr_t iobase, int irq) |
391 | { | |
392 | struct uart_port port; | |
393 | int line; | |
394 | ||
395 | memset(&port, 0, sizeof (struct uart_port)); | |
396 | port.iobase = iobase; | |
397 | port.irq = irq; | |
398 | port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; | |
399 | port.uartclk = 1843200; | |
400 | port.dev = &handle_to_dev(handle); | |
401 | if (buggy_uart) | |
402 | port.flags |= UPF_BUGGY_UART; | |
f3d10688 RK |
403 | |
404 | if (info->quirk && info->quirk->setup) | |
405 | info->quirk->setup(handle, &port); | |
406 | ||
1da177e4 LT |
407 | line = serial8250_register_port(&port); |
408 | if (line < 0) { | |
409 | printk(KERN_NOTICE "serial_cs: serial8250_register_port() at " | |
410 | "0x%04lx, irq %d failed\n", (u_long)iobase, irq); | |
411 | return -EINVAL; | |
412 | } | |
413 | ||
414 | info->line[info->ndev] = line; | |
415 | sprintf(info->node[info->ndev].dev_name, "ttyS%d", line); | |
416 | info->node[info->ndev].major = TTY_MAJOR; | |
417 | info->node[info->ndev].minor = 0x40 + line; | |
418 | if (info->ndev > 0) | |
419 | info->node[info->ndev - 1].next = &info->node[info->ndev]; | |
420 | info->ndev++; | |
421 | ||
422 | return 0; | |
423 | } | |
424 | ||
425 | /*====================================================================*/ | |
426 | ||
427 | static int | |
fba395ee | 428 | first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse) |
1da177e4 LT |
429 | { |
430 | int i; | |
431 | i = pcmcia_get_first_tuple(handle, tuple); | |
432 | if (i != CS_SUCCESS) | |
433 | return CS_NO_MORE_ITEMS; | |
434 | i = pcmcia_get_tuple_data(handle, tuple); | |
435 | if (i != CS_SUCCESS) | |
436 | return i; | |
437 | return pcmcia_parse_tuple(handle, tuple, parse); | |
438 | } | |
439 | ||
440 | static int | |
fba395ee | 441 | next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse) |
1da177e4 LT |
442 | { |
443 | int i; | |
444 | i = pcmcia_get_next_tuple(handle, tuple); | |
445 | if (i != CS_SUCCESS) | |
446 | return CS_NO_MORE_ITEMS; | |
447 | i = pcmcia_get_tuple_data(handle, tuple); | |
448 | if (i != CS_SUCCESS) | |
449 | return i; | |
450 | return pcmcia_parse_tuple(handle, tuple, parse); | |
451 | } | |
452 | ||
453 | /*====================================================================*/ | |
454 | ||
fba395ee | 455 | static int simple_config(struct pcmcia_device *link) |
1da177e4 | 456 | { |
cb3592be AV |
457 | static const kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; |
458 | static const int size_table[2] = { 8, 16 }; | |
1da177e4 | 459 | struct serial_info *info = link->priv; |
16f31113 YR |
460 | struct serial_cfg_mem *cfg_mem; |
461 | tuple_t *tuple; | |
462 | u_char *buf; | |
463 | cisparse_t *parse; | |
464 | cistpl_cftable_entry_t *cf; | |
1da177e4 LT |
465 | config_info_t config; |
466 | int i, j, try; | |
467 | int s; | |
468 | ||
16f31113 YR |
469 | cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); |
470 | if (!cfg_mem) | |
471 | return -1; | |
472 | ||
473 | tuple = &cfg_mem->tuple; | |
474 | parse = &cfg_mem->parse; | |
475 | cf = &parse->cftable_entry; | |
476 | buf = cfg_mem->buf; | |
477 | ||
1da177e4 | 478 | /* If the card is already configured, look up the port and irq */ |
fba395ee | 479 | i = pcmcia_get_configuration_info(link, &config); |
1da177e4 LT |
480 | if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) { |
481 | kio_addr_t port = 0; | |
482 | if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) { | |
483 | port = config.BasePort2; | |
484 | info->slave = 1; | |
485 | } else if ((info->manfid == MANFID_OSITECH) && | |
486 | (config.NumPorts1 == 0x40)) { | |
487 | port = config.BasePort1 + 0x28; | |
488 | info->slave = 1; | |
489 | } | |
16f31113 YR |
490 | if (info->slave) { |
491 | kfree(cfg_mem); | |
fba395ee | 492 | return setup_serial(link, info, port, config.AssignedIRQ); |
16f31113 | 493 | } |
1da177e4 | 494 | } |
1da177e4 LT |
495 | |
496 | /* First pass: look for a config entry that looks normal. */ | |
16f31113 YR |
497 | tuple->TupleData = (cisdata_t *) buf; |
498 | tuple->TupleOffset = 0; | |
499 | tuple->TupleDataMax = 255; | |
500 | tuple->Attributes = 0; | |
501 | tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
1da177e4 LT |
502 | /* Two tries: without IO aliases, then with aliases */ |
503 | for (s = 0; s < 2; s++) { | |
504 | for (try = 0; try < 2; try++) { | |
fba395ee | 505 | i = first_tuple(link, tuple, parse); |
1da177e4 LT |
506 | while (i != CS_NO_MORE_ITEMS) { |
507 | if (i != CS_SUCCESS) | |
508 | goto next_entry; | |
509 | if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) | |
70294b46 | 510 | link->conf.Vpp = |
1da177e4 LT |
511 | cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; |
512 | if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) && | |
513 | (cf->io.win[0].base != 0)) { | |
514 | link->conf.ConfigIndex = cf->index; | |
515 | link->io.BasePort1 = cf->io.win[0].base; | |
516 | link->io.IOAddrLines = (try == 0) ? | |
517 | 16 : cf->io.flags & CISTPL_IO_LINES_MASK; | |
fba395ee | 518 | i = pcmcia_request_io(link, &link->io); |
1da177e4 LT |
519 | if (i == CS_SUCCESS) |
520 | goto found_port; | |
521 | } | |
522 | next_entry: | |
fba395ee | 523 | i = next_tuple(link, tuple, parse); |
1da177e4 LT |
524 | } |
525 | } | |
526 | } | |
527 | /* Second pass: try to find an entry that isn't picky about | |
528 | its base address, then try to grab any standard serial port | |
529 | address, and finally try to get any free port. */ | |
fba395ee | 530 | i = first_tuple(link, tuple, parse); |
1da177e4 LT |
531 | while (i != CS_NO_MORE_ITEMS) { |
532 | if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && | |
533 | ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { | |
534 | link->conf.ConfigIndex = cf->index; | |
535 | for (j = 0; j < 5; j++) { | |
536 | link->io.BasePort1 = base[j]; | |
537 | link->io.IOAddrLines = base[j] ? 16 : 3; | |
fba395ee | 538 | i = pcmcia_request_io(link, &link->io); |
1da177e4 LT |
539 | if (i == CS_SUCCESS) |
540 | goto found_port; | |
541 | } | |
542 | } | |
fba395ee | 543 | i = next_tuple(link, tuple, parse); |
1da177e4 LT |
544 | } |
545 | ||
546 | found_port: | |
547 | if (i != CS_SUCCESS) { | |
548 | printk(KERN_NOTICE | |
549 | "serial_cs: no usable port range found, giving up\n"); | |
fba395ee | 550 | cs_error(link, RequestIO, i); |
16f31113 | 551 | kfree(cfg_mem); |
1da177e4 LT |
552 | return -1; |
553 | } | |
554 | ||
fba395ee | 555 | i = pcmcia_request_irq(link, &link->irq); |
1da177e4 | 556 | if (i != CS_SUCCESS) { |
fba395ee | 557 | cs_error(link, RequestIRQ, i); |
1da177e4 LT |
558 | link->irq.AssignedIRQ = 0; |
559 | } | |
560 | if (info->multi && (info->manfid == MANFID_3COM)) | |
561 | link->conf.ConfigIndex &= ~(0x08); | |
efd92dfa RK |
562 | |
563 | /* | |
564 | * Apply any configuration quirks. | |
565 | */ | |
566 | if (info->quirk && info->quirk->config) | |
567 | info->quirk->config(link); | |
568 | ||
fba395ee | 569 | i = pcmcia_request_configuration(link, &link->conf); |
1da177e4 | 570 | if (i != CS_SUCCESS) { |
fba395ee | 571 | cs_error(link, RequestConfiguration, i); |
16f31113 | 572 | kfree(cfg_mem); |
1da177e4 LT |
573 | return -1; |
574 | } | |
16f31113 | 575 | kfree(cfg_mem); |
fba395ee | 576 | return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); |
1da177e4 LT |
577 | } |
578 | ||
fba395ee | 579 | static int multi_config(struct pcmcia_device * link) |
1da177e4 | 580 | { |
1da177e4 | 581 | struct serial_info *info = link->priv; |
16f31113 YR |
582 | struct serial_cfg_mem *cfg_mem; |
583 | tuple_t *tuple; | |
584 | u_char *buf; | |
585 | cisparse_t *parse; | |
586 | cistpl_cftable_entry_t *cf; | |
16f31113 YR |
587 | int i, rc, base2 = 0; |
588 | ||
589 | cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); | |
590 | if (!cfg_mem) | |
591 | return -1; | |
592 | tuple = &cfg_mem->tuple; | |
593 | parse = &cfg_mem->parse; | |
594 | cf = &parse->cftable_entry; | |
595 | buf = cfg_mem->buf; | |
1da177e4 | 596 | |
16f31113 YR |
597 | tuple->TupleData = (cisdata_t *) buf; |
598 | tuple->TupleOffset = 0; | |
599 | tuple->TupleDataMax = 255; | |
600 | tuple->Attributes = 0; | |
601 | tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
1da177e4 LT |
602 | |
603 | /* First, look for a generic full-sized window */ | |
604 | link->io.NumPorts1 = info->multi * 8; | |
fba395ee | 605 | i = first_tuple(link, tuple, parse); |
1da177e4 LT |
606 | while (i != CS_NO_MORE_ITEMS) { |
607 | /* The quad port cards have bad CIS's, so just look for a | |
608 | window larger than 8 ports and assume it will be right */ | |
609 | if ((i == CS_SUCCESS) && (cf->io.nwin == 1) && | |
610 | (cf->io.win[0].len > 8)) { | |
611 | link->conf.ConfigIndex = cf->index; | |
612 | link->io.BasePort1 = cf->io.win[0].base; | |
613 | link->io.IOAddrLines = | |
614 | cf->io.flags & CISTPL_IO_LINES_MASK; | |
fba395ee | 615 | i = pcmcia_request_io(link, &link->io); |
1da177e4 LT |
616 | base2 = link->io.BasePort1 + 8; |
617 | if (i == CS_SUCCESS) | |
618 | break; | |
619 | } | |
fba395ee | 620 | i = next_tuple(link, tuple, parse); |
1da177e4 LT |
621 | } |
622 | ||
623 | /* If that didn't work, look for two windows */ | |
624 | if (i != CS_SUCCESS) { | |
625 | link->io.NumPorts1 = link->io.NumPorts2 = 8; | |
626 | info->multi = 2; | |
fba395ee | 627 | i = first_tuple(link, tuple, parse); |
1da177e4 LT |
628 | while (i != CS_NO_MORE_ITEMS) { |
629 | if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) { | |
630 | link->conf.ConfigIndex = cf->index; | |
631 | link->io.BasePort1 = cf->io.win[0].base; | |
632 | link->io.BasePort2 = cf->io.win[1].base; | |
633 | link->io.IOAddrLines = | |
634 | cf->io.flags & CISTPL_IO_LINES_MASK; | |
fba395ee | 635 | i = pcmcia_request_io(link, &link->io); |
1da177e4 LT |
636 | base2 = link->io.BasePort2; |
637 | if (i == CS_SUCCESS) | |
638 | break; | |
639 | } | |
fba395ee | 640 | i = next_tuple(link, tuple, parse); |
1da177e4 LT |
641 | } |
642 | } | |
643 | ||
644 | if (i != CS_SUCCESS) { | |
fba395ee | 645 | cs_error(link, RequestIO, i); |
16f31113 YR |
646 | rc = -1; |
647 | goto free_cfg_mem; | |
1da177e4 LT |
648 | } |
649 | ||
fba395ee | 650 | i = pcmcia_request_irq(link, &link->irq); |
1da177e4 LT |
651 | if (i != CS_SUCCESS) { |
652 | printk(KERN_NOTICE | |
653 | "serial_cs: no usable port range found, giving up\n"); | |
fba395ee | 654 | cs_error(link, RequestIRQ, i); |
1da177e4 LT |
655 | link->irq.AssignedIRQ = 0; |
656 | } | |
efd92dfa RK |
657 | |
658 | /* | |
659 | * Apply any configuration quirks. | |
660 | */ | |
661 | if (info->quirk && info->quirk->config) | |
662 | info->quirk->config(link); | |
663 | ||
fba395ee | 664 | i = pcmcia_request_configuration(link, &link->conf); |
1da177e4 | 665 | if (i != CS_SUCCESS) { |
fba395ee | 666 | cs_error(link, RequestConfiguration, i); |
16f31113 YR |
667 | rc = -1; |
668 | goto free_cfg_mem; | |
1da177e4 LT |
669 | } |
670 | ||
671 | /* The Oxford Semiconductor OXCF950 cards are in fact single-port: | |
30bac7aa PV |
672 | * 8 registers are for the UART, the others are extra registers. |
673 | * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. | |
674 | */ | |
675 | if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && | |
676 | info->prodid == PRODID_POSSIO_GCC)) { | |
677 | int err; | |
678 | ||
1da177e4 | 679 | if (cf->index == 1 || cf->index == 3) { |
30bac7aa PV |
680 | err = setup_serial(link, info, base2, |
681 | link->irq.AssignedIRQ); | |
682 | base2 = link->io.BasePort1; | |
1da177e4 | 683 | } else { |
30bac7aa PV |
684 | err = setup_serial(link, info, link->io.BasePort1, |
685 | link->irq.AssignedIRQ); | |
1da177e4 | 686 | } |
30bac7aa | 687 | info->c950ctrl = base2; |
7ef057fa RK |
688 | |
689 | /* | |
690 | * FIXME: We really should wake up the port prior to | |
691 | * handing it over to the serial layer. | |
692 | */ | |
693 | if (info->quirk && info->quirk->wakeup) | |
694 | info->quirk->wakeup(link); | |
695 | ||
16f31113 YR |
696 | rc = 0; |
697 | goto free_cfg_mem; | |
1da177e4 LT |
698 | } |
699 | ||
fba395ee | 700 | setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); |
1da177e4 | 701 | for (i = 0; i < info->multi - 1; i++) |
fba395ee | 702 | setup_serial(link, info, base2 + (8 * i), |
16f31113 YR |
703 | link->irq.AssignedIRQ); |
704 | rc = 0; | |
705 | free_cfg_mem: | |
706 | kfree(cfg_mem); | |
707 | return rc; | |
1da177e4 LT |
708 | } |
709 | ||
710 | /*====================================================================== | |
711 | ||
712 | serial_config() is scheduled to run after a CARD_INSERTION event | |
713 | is received, to configure the PCMCIA socket, and to make the | |
714 | serial device available to the system. | |
715 | ||
716 | ======================================================================*/ | |
717 | ||
15b99ac1 | 718 | static int serial_config(struct pcmcia_device * link) |
1da177e4 | 719 | { |
1da177e4 | 720 | struct serial_info *info = link->priv; |
16f31113 YR |
721 | struct serial_cfg_mem *cfg_mem; |
722 | tuple_t *tuple; | |
723 | u_char *buf; | |
724 | cisparse_t *parse; | |
725 | cistpl_cftable_entry_t *cf; | |
1da177e4 LT |
726 | int i, last_ret, last_fn; |
727 | ||
728 | DEBUG(0, "serial_config(0x%p)\n", link); | |
729 | ||
16f31113 YR |
730 | cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); |
731 | if (!cfg_mem) | |
732 | goto failed; | |
733 | ||
734 | tuple = &cfg_mem->tuple; | |
735 | parse = &cfg_mem->parse; | |
736 | cf = &parse->cftable_entry; | |
737 | buf = cfg_mem->buf; | |
738 | ||
739 | tuple->TupleData = (cisdata_t *) buf; | |
740 | tuple->TupleOffset = 0; | |
741 | tuple->TupleDataMax = 255; | |
742 | tuple->Attributes = 0; | |
1da177e4 | 743 | /* Get configuration register information */ |
16f31113 | 744 | tuple->DesiredTuple = CISTPL_CONFIG; |
fba395ee | 745 | last_ret = first_tuple(link, tuple, parse); |
1da177e4 LT |
746 | if (last_ret != CS_SUCCESS) { |
747 | last_fn = ParseTuple; | |
748 | goto cs_failed; | |
749 | } | |
16f31113 YR |
750 | link->conf.ConfigBase = parse->config.base; |
751 | link->conf.Present = parse->config.rmask[0]; | |
1da177e4 | 752 | |
1da177e4 | 753 | /* Is this a compliant multifunction card? */ |
16f31113 YR |
754 | tuple->DesiredTuple = CISTPL_LONGLINK_MFC; |
755 | tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK; | |
fba395ee | 756 | info->multi = (first_tuple(link, tuple, parse) == CS_SUCCESS); |
1da177e4 LT |
757 | |
758 | /* Is this a multiport card? */ | |
16f31113 | 759 | tuple->DesiredTuple = CISTPL_MANFID; |
fba395ee | 760 | if (first_tuple(link, tuple, parse) == CS_SUCCESS) { |
f1fc3990 | 761 | info->manfid = parse->manfid.manf; |
43549ad7 | 762 | info->prodid = parse->manfid.card; |
a8244b56 | 763 | |
1fbbac4b | 764 | for (i = 0; i < ARRAY_SIZE(quirks); i++) |
a8244b56 RK |
765 | if ((quirks[i].manfid == ~0 || |
766 | quirks[i].manfid == info->manfid) && | |
767 | (quirks[i].prodid == ~0 || | |
768 | quirks[i].prodid == info->prodid)) { | |
1fbbac4b | 769 | info->quirk = &quirks[i]; |
1da177e4 | 770 | break; |
43549ad7 | 771 | } |
1da177e4 LT |
772 | } |
773 | ||
774 | /* Another check for dual-serial cards: look for either serial or | |
775 | multifunction cards that ask for appropriate IO port ranges */ | |
16f31113 | 776 | tuple->DesiredTuple = CISTPL_FUNCID; |
1da177e4 | 777 | if ((info->multi == 0) && |
fba395ee | 778 | ((first_tuple(link, tuple, parse) != CS_SUCCESS) || |
16f31113 YR |
779 | (parse->funcid.func == CISTPL_FUNCID_MULTI) || |
780 | (parse->funcid.func == CISTPL_FUNCID_SERIAL))) { | |
781 | tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; | |
fba395ee | 782 | if (first_tuple(link, tuple, parse) == CS_SUCCESS) { |
1da177e4 LT |
783 | if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0)) |
784 | info->multi = cf->io.win[0].len >> 3; | |
785 | if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) && | |
786 | (cf->io.win[1].len == 8)) | |
787 | info->multi = 2; | |
788 | } | |
789 | } | |
790 | ||
1fbbac4b RK |
791 | /* |
792 | * Apply any multi-port quirk. | |
793 | */ | |
794 | if (info->quirk && info->quirk->multi != -1) | |
795 | info->multi = info->quirk->multi; | |
796 | ||
1da177e4 LT |
797 | if (info->multi > 1) |
798 | multi_config(link); | |
799 | else | |
800 | simple_config(link); | |
801 | ||
802 | if (info->ndev == 0) | |
803 | goto failed; | |
804 | ||
eee3a883 RK |
805 | /* |
806 | * Apply any post-init quirk. FIXME: This should really happen | |
807 | * before we register the port, since it might already be in use. | |
808 | */ | |
809 | if (info->quirk && info->quirk->post) | |
810 | if (info->quirk->post(link)) | |
811 | goto failed; | |
1da177e4 | 812 | |
fd238232 | 813 | link->dev_node = &info->node[0]; |
16f31113 | 814 | kfree(cfg_mem); |
15b99ac1 | 815 | return 0; |
1da177e4 LT |
816 | |
817 | cs_failed: | |
fba395ee | 818 | cs_error(link, last_fn, last_ret); |
1da177e4 LT |
819 | failed: |
820 | serial_remove(link); | |
16f31113 | 821 | kfree(cfg_mem); |
15b99ac1 | 822 | return -ENODEV; |
1da177e4 LT |
823 | } |
824 | ||
325aa29f DB |
825 | static struct pcmcia_device_id serial_ids[] = { |
826 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), | |
827 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), | |
828 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), | |
829 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), | |
830 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), | |
831 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), | |
832 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), | |
833 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), | |
834 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), | |
835 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), | |
836 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), | |
837 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), | |
f4d7510d JK |
838 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), |
839 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), | |
325aa29f DB |
840 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), |
841 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), | |
842 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), | |
843 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), | |
844 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), | |
845 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), | |
846 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), | |
847 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), | |
848 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), | |
d277ad0e | 849 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), |
325aa29f DB |
850 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), |
851 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), | |
852 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), | |
853 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), | |
854 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), | |
855 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), | |
d277ad0e K |
856 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), |
857 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), | |
325aa29f DB |
858 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), |
859 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), | |
860 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), | |
d277ad0e | 861 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), |
325aa29f DB |
862 | PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), |
863 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), | |
864 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), | |
865 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), | |
866 | PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), | |
867 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), | |
868 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), | |
869 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), | |
870 | PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), | |
871 | PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), | |
872 | PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), | |
1de9cedf | 873 | PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), |
325aa29f DB |
874 | PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), |
875 | PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), | |
876 | PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), | |
877 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), | |
878 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), | |
879 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), | |
880 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), | |
881 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), | |
882 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), | |
883 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), | |
884 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), | |
885 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), | |
886 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), | |
887 | PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), | |
888 | PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), | |
889 | PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), | |
890 | PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), | |
891 | PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), | |
1de9cedf | 892 | PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), |
325aa29f DB |
893 | PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), |
894 | PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), | |
895 | PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), | |
896 | PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), | |
897 | PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), | |
898 | PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), | |
899 | PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), | |
900 | PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), | |
d277ad0e | 901 | PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), |
325aa29f DB |
902 | PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), |
903 | PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), | |
904 | PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), | |
905 | PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), | |
906 | PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), | |
907 | PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), | |
908 | PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), | |
909 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"), | |
910 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"), | |
911 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"), | |
912 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"), | |
913 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"), | |
914 | PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"), | |
915 | PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"), | |
916 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "3CCFEM556.cis"), | |
917 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"), | |
918 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "3CXEM556.cis"), | |
919 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "3CXEM556.cis"), | |
a42f0dc4 | 920 | PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ |
f542ff6d DB |
921 | PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ |
922 | PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ | |
325aa29f DB |
923 | PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "MT5634ZLX.cis"), |
924 | PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"), | |
925 | PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"), | |
926 | PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "RS-COM-2P.cis"), | |
fec21889 | 927 | PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "GLOBETROTTER.cis"), |
325aa29f DB |
928 | /* too generic */ |
929 | /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ | |
930 | /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ | |
931 | PCMCIA_DEVICE_FUNC_ID(2), | |
932 | PCMCIA_DEVICE_NULL, | |
933 | }; | |
934 | MODULE_DEVICE_TABLE(pcmcia, serial_ids); | |
935 | ||
1da177e4 LT |
936 | static struct pcmcia_driver serial_cs_driver = { |
937 | .owner = THIS_MODULE, | |
938 | .drv = { | |
939 | .name = "serial_cs", | |
940 | }, | |
f8cfa618 | 941 | .probe = serial_probe, |
cc3b4866 | 942 | .remove = serial_detach, |
325aa29f | 943 | .id_table = serial_ids, |
98e4c28b DB |
944 | .suspend = serial_suspend, |
945 | .resume = serial_resume, | |
1da177e4 LT |
946 | }; |
947 | ||
948 | static int __init init_serial_cs(void) | |
949 | { | |
950 | return pcmcia_register_driver(&serial_cs_driver); | |
951 | } | |
952 | ||
953 | static void __exit exit_serial_cs(void) | |
954 | { | |
955 | pcmcia_unregister_driver(&serial_cs_driver); | |
1da177e4 LT |
956 | } |
957 | ||
958 | module_init(init_serial_cs); | |
959 | module_exit(exit_serial_cs); | |
960 | ||
961 | MODULE_LICENSE("GPL"); |