Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /*====================================================================== |
2 | ||
3 | A driver for PCMCIA serial devices | |
4 | ||
5 | serial_cs.c 1.134 2002/05/04 05:48:53 | |
6 | ||
7 | The contents of this file are subject to the Mozilla Public | |
8 | License Version 1.1 (the "License"); you may not use this file | |
9 | except in compliance with the License. You may obtain a copy of | |
10 | the License at http://www.mozilla.org/MPL/ | |
11 | ||
12 | Software distributed under the License is distributed on an "AS | |
13 | IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or | |
14 | implied. See the License for the specific language governing | |
15 | rights and limitations under the License. | |
16 | ||
17 | The initial developer of the original code is David A. Hinds | |
18 | <dahinds@users.sourceforge.net>. Portions created by David A. Hinds | |
19 | are Copyright (C) 1999 David A. Hinds. All Rights Reserved. | |
20 | ||
21 | Alternatively, the contents of this file may be used under the | |
22 | terms of the GNU General Public License version 2 (the "GPL"), in which | |
23 | case the provisions of the GPL are applicable instead of the | |
24 | above. If you wish to allow the use of your version of this file | |
25 | only under the terms of the GPL and not to allow others to use | |
26 | your version of this file under the MPL, indicate your decision | |
27 | by deleting the provisions above and replace them with the notice | |
28 | and other provisions required by the GPL. If you do not delete | |
29 | the provisions above, a recipient may use your version of this | |
30 | file under either the MPL or the GPL. | |
31 | ||
32 | ======================================================================*/ | |
33 | ||
34 | #include <linux/module.h> | |
35 | #include <linux/moduleparam.h> | |
36 | #include <linux/kernel.h> | |
37 | #include <linux/init.h> | |
1da177e4 LT |
38 | #include <linux/ptrace.h> |
39 | #include <linux/slab.h> | |
40 | #include <linux/string.h> | |
41 | #include <linux/timer.h> | |
42 | #include <linux/serial_core.h> | |
30bac7aa | 43 | #include <linux/delay.h> |
1da177e4 LT |
44 | #include <linux/major.h> |
45 | #include <asm/io.h> | |
46 | #include <asm/system.h> | |
47 | ||
1da177e4 LT |
48 | #include <pcmcia/cs_types.h> |
49 | #include <pcmcia/cs.h> | |
50 | #include <pcmcia/cistpl.h> | |
51 | #include <pcmcia/ciscode.h> | |
52 | #include <pcmcia/ds.h> | |
53 | #include <pcmcia/cisreg.h> | |
54 | ||
55 | #include "8250.h" | |
56 | ||
57 | #ifdef PCMCIA_DEBUG | |
58 | static int pc_debug = PCMCIA_DEBUG; | |
59 | module_param(pc_debug, int, 0644); | |
60 | #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) | |
61 | static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)"; | |
62 | #else | |
63 | #define DEBUG(n, args...) | |
64 | #endif | |
65 | ||
66 | /*====================================================================*/ | |
67 | ||
68 | /* Parameters that can be set with 'insmod' */ | |
69 | ||
70 | /* Enable the speaker? */ | |
71 | static int do_sound = 1; | |
72 | /* Skip strict UART tests? */ | |
73 | static int buggy_uart; | |
74 | ||
75 | module_param(do_sound, int, 0444); | |
76 | module_param(buggy_uart, int, 0444); | |
77 | ||
78 | /*====================================================================*/ | |
79 | ||
80 | /* Table of multi-port card ID's */ | |
81 | ||
1fbbac4b | 82 | struct serial_quirk { |
a8244b56 RK |
83 | unsigned int manfid; |
84 | unsigned int prodid; | |
1da177e4 | 85 | int multi; /* 1 = multifunction, > 1 = # ports */ |
efd92dfa | 86 | void (*config)(struct pcmcia_device *); |
f3d10688 | 87 | void (*setup)(struct pcmcia_device *, struct uart_port *); |
7ef057fa | 88 | void (*wakeup)(struct pcmcia_device *); |
eee3a883 | 89 | int (*post)(struct pcmcia_device *); |
1da177e4 LT |
90 | }; |
91 | ||
eee3a883 RK |
92 | struct serial_info { |
93 | struct pcmcia_device *p_dev; | |
94 | int ndev; | |
95 | int multi; | |
96 | int slave; | |
97 | int manfid; | |
98 | int prodid; | |
99 | int c950ctrl; | |
100 | dev_node_t node[4]; | |
101 | int line[4]; | |
102 | const struct serial_quirk *quirk; | |
103 | }; | |
104 | ||
105 | struct serial_cfg_mem { | |
106 | tuple_t tuple; | |
107 | cisparse_t parse; | |
108 | u_char buf[256]; | |
109 | }; | |
110 | ||
f3d10688 RK |
111 | /* |
112 | * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6" | |
113 | * manfid 0x0160, 0x0104 | |
114 | * This card appears to have a 14.7456MHz clock. | |
115 | */ | |
116 | static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port) | |
117 | { | |
118 | port->uartclk = 14745600; | |
119 | } | |
120 | ||
eee3a883 RK |
121 | static int quirk_post_ibm(struct pcmcia_device *link) |
122 | { | |
123 | conf_reg_t reg = { 0, CS_READ, 0x800, 0 }; | |
124 | int last_ret, last_fn; | |
125 | ||
126 | last_ret = pcmcia_access_configuration_register(link, ®); | |
127 | if (last_ret) { | |
128 | last_fn = AccessConfigurationRegister; | |
129 | goto cs_failed; | |
130 | } | |
131 | reg.Action = CS_WRITE; | |
132 | reg.Value = reg.Value | 1; | |
133 | last_ret = pcmcia_access_configuration_register(link, ®); | |
134 | if (last_ret) { | |
135 | last_fn = AccessConfigurationRegister; | |
136 | goto cs_failed; | |
137 | } | |
138 | return 0; | |
139 | ||
140 | cs_failed: | |
141 | cs_error(link, last_fn, last_ret); | |
142 | return -ENODEV; | |
143 | } | |
144 | ||
20f13049 RK |
145 | /* |
146 | * Nokia cards are not really multiport cards. Shouldn't this | |
147 | * be handled by setting the quirk entry .multi = 0 | 1 ? | |
148 | */ | |
149 | static void quirk_config_nokia(struct pcmcia_device *link) | |
150 | { | |
151 | struct serial_info *info = link->priv; | |
152 | ||
153 | if (info->multi > 1) | |
154 | info->multi = 1; | |
155 | } | |
156 | ||
7ef057fa RK |
157 | static void quirk_wakeup_oxsemi(struct pcmcia_device *link) |
158 | { | |
159 | struct serial_info *info = link->priv; | |
160 | ||
161 | outb(12, info->c950ctrl + 1); | |
162 | } | |
163 | ||
164 | /* request_region? oxsemi branch does no request_region too... */ | |
165 | /* | |
166 | * This sequence is needed to properly initialize MC45 attached to OXCF950. | |
167 | * I tried decreasing these msleep()s, but it worked properly (survived | |
168 | * 1000 stop/start operations) with these timeouts (or bigger). | |
169 | */ | |
170 | static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) | |
171 | { | |
172 | struct serial_info *info = link->priv; | |
173 | unsigned int ctrl = info->c950ctrl; | |
174 | ||
175 | outb(0xA, ctrl + 1); | |
176 | msleep(100); | |
177 | outb(0xE, ctrl + 1); | |
178 | msleep(300); | |
179 | outb(0xC, ctrl + 1); | |
180 | msleep(100); | |
181 | outb(0xE, ctrl + 1); | |
182 | msleep(200); | |
183 | outb(0xF, ctrl + 1); | |
184 | msleep(100); | |
185 | outb(0xE, ctrl + 1); | |
186 | msleep(100); | |
187 | outb(0xC, ctrl + 1); | |
188 | } | |
189 | ||
efd92dfa RK |
190 | /* |
191 | * Socket Dual IO: this enables irq's for second port | |
192 | */ | |
193 | static void quirk_config_socket(struct pcmcia_device *link) | |
194 | { | |
195 | struct serial_info *info = link->priv; | |
196 | ||
197 | if (info->multi) { | |
198 | link->conf.Present |= PRESENT_EXT_STATUS; | |
199 | link->conf.ExtStatus = ESR_REQ_ATTN_ENA; | |
200 | } | |
201 | } | |
202 | ||
1fbbac4b RK |
203 | static const struct serial_quirk quirks[] = { |
204 | { | |
f3d10688 RK |
205 | .manfid = 0x0160, |
206 | .prodid = 0x0104, | |
207 | .multi = -1, | |
208 | .setup = quirk_setup_brainboxes_0104, | |
209 | }, { | |
eee3a883 RK |
210 | .manfid = MANFID_IBM, |
211 | .prodid = ~0, | |
212 | .multi = -1, | |
213 | .post = quirk_post_ibm, | |
7ef057fa RK |
214 | }, { |
215 | .manfid = MANFID_INTEL, | |
216 | .prodid = PRODID_INTEL_DUAL_RS232, | |
217 | .multi = 2, | |
218 | }, { | |
219 | .manfid = MANFID_NATINST, | |
220 | .prodid = PRODID_NATINST_QUAD_RS232, | |
221 | .multi = 4, | |
20f13049 RK |
222 | }, { |
223 | .manfid = MANFID_NOKIA, | |
224 | .prodid = ~0, | |
225 | .multi = -1, | |
226 | .config = quirk_config_nokia, | |
eee3a883 | 227 | }, { |
1fbbac4b RK |
228 | .manfid = MANFID_OMEGA, |
229 | .prodid = PRODID_OMEGA_QSP_100, | |
230 | .multi = 4, | |
7ef057fa RK |
231 | }, { |
232 | .manfid = MANFID_OXSEMI, | |
233 | .prodid = ~0, | |
234 | .multi = -1, | |
235 | .wakeup = quirk_wakeup_oxsemi, | |
236 | }, { | |
237 | .manfid = MANFID_POSSIO, | |
238 | .prodid = PRODID_POSSIO_GCC, | |
239 | .multi = -1, | |
240 | .wakeup = quirk_wakeup_possio_gcc, | |
1fbbac4b RK |
241 | }, { |
242 | .manfid = MANFID_QUATECH, | |
243 | .prodid = PRODID_QUATECH_DUAL_RS232, | |
244 | .multi = 2, | |
245 | }, { | |
246 | .manfid = MANFID_QUATECH, | |
247 | .prodid = PRODID_QUATECH_DUAL_RS232_D1, | |
248 | .multi = 2, | |
bb289bc4 SO |
249 | }, { |
250 | .manfid = MANFID_QUATECH, | |
251 | .prodid = PRODID_QUATECH_DUAL_RS232_G, | |
252 | .multi = 2, | |
1fbbac4b RK |
253 | }, { |
254 | .manfid = MANFID_QUATECH, | |
255 | .prodid = PRODID_QUATECH_QUAD_RS232, | |
256 | .multi = 4, | |
257 | }, { | |
258 | .manfid = MANFID_SOCKET, | |
259 | .prodid = PRODID_SOCKET_DUAL_RS232, | |
260 | .multi = 2, | |
efd92dfa RK |
261 | .config = quirk_config_socket, |
262 | }, { | |
263 | .manfid = MANFID_SOCKET, | |
264 | .prodid = ~0, | |
265 | .multi = -1, | |
266 | .config = quirk_config_socket, | |
1fbbac4b | 267 | } |
1da177e4 | 268 | }; |
1da177e4 | 269 | |
16f31113 | 270 | |
15b99ac1 | 271 | static int serial_config(struct pcmcia_device * link); |
1da177e4 | 272 | |
1da177e4 | 273 | |
1da177e4 LT |
274 | /*====================================================================== |
275 | ||
276 | After a card is removed, serial_remove() will unregister | |
277 | the serial device(s), and release the PCMCIA configuration. | |
278 | ||
279 | ======================================================================*/ | |
280 | ||
fba395ee | 281 | static void serial_remove(struct pcmcia_device *link) |
1da177e4 LT |
282 | { |
283 | struct serial_info *info = link->priv; | |
284 | int i; | |
285 | ||
1da177e4 LT |
286 | DEBUG(0, "serial_release(0x%p)\n", link); |
287 | ||
288 | /* | |
289 | * Recheck to see if the device is still configured. | |
290 | */ | |
e2d40963 DB |
291 | for (i = 0; i < info->ndev; i++) |
292 | serial8250_unregister_port(info->line[i]); | |
1da177e4 | 293 | |
e2d40963 | 294 | info->p_dev->dev_node = NULL; |
1da177e4 | 295 | |
e2d40963 DB |
296 | if (!info->slave) |
297 | pcmcia_disable_device(link); | |
1da177e4 LT |
298 | } |
299 | ||
fba395ee | 300 | static int serial_suspend(struct pcmcia_device *link) |
1da177e4 | 301 | { |
e2d40963 DB |
302 | struct serial_info *info = link->priv; |
303 | int i; | |
1da177e4 | 304 | |
e2d40963 DB |
305 | for (i = 0; i < info->ndev; i++) |
306 | serial8250_suspend_port(info->line[i]); | |
98e4c28b DB |
307 | |
308 | return 0; | |
1da177e4 LT |
309 | } |
310 | ||
fba395ee | 311 | static int serial_resume(struct pcmcia_device *link) |
1da177e4 | 312 | { |
fe59d537 RK |
313 | struct serial_info *info = link->priv; |
314 | int i; | |
1da177e4 | 315 | |
fe59d537 RK |
316 | for (i = 0; i < info->ndev; i++) |
317 | serial8250_resume_port(info->line[i]); | |
7ef057fa | 318 | |
fe59d537 RK |
319 | if (info->quirk && info->quirk->wakeup) |
320 | info->quirk->wakeup(link); | |
98e4c28b DB |
321 | |
322 | return 0; | |
1da177e4 LT |
323 | } |
324 | ||
325 | /*====================================================================== | |
326 | ||
327 | serial_attach() creates an "instance" of the driver, allocating | |
328 | local data structures for one device. The device is registered | |
329 | with Card Services. | |
330 | ||
331 | ======================================================================*/ | |
332 | ||
fba395ee | 333 | static int serial_probe(struct pcmcia_device *link) |
1da177e4 LT |
334 | { |
335 | struct serial_info *info; | |
1da177e4 LT |
336 | |
337 | DEBUG(0, "serial_attach()\n"); | |
338 | ||
339 | /* Create new serial device */ | |
8f31bb39 | 340 | info = kzalloc(sizeof (*info), GFP_KERNEL); |
1da177e4 | 341 | if (!info) |
f8cfa618 | 342 | return -ENOMEM; |
fba395ee | 343 | info->p_dev = link; |
1da177e4 LT |
344 | link->priv = info; |
345 | ||
346 | link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; | |
347 | link->io.NumPorts1 = 8; | |
5e7bf8cc | 348 | link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; |
1da177e4 LT |
349 | link->irq.IRQInfo1 = IRQ_LEVEL_ID; |
350 | link->conf.Attributes = CONF_ENABLE_IRQ; | |
351 | if (do_sound) { | |
352 | link->conf.Attributes |= CONF_ENABLE_SPKR; | |
353 | link->conf.Status = CCSR_AUDIO_ENA; | |
354 | } | |
355 | link->conf.IntType = INT_MEMORY_AND_IO; | |
356 | ||
15b99ac1 | 357 | return serial_config(link); |
1da177e4 LT |
358 | } |
359 | ||
360 | /*====================================================================== | |
361 | ||
362 | This deletes a driver "instance". The device is de-registered | |
363 | with Card Services. If it has been released, all local data | |
364 | structures are freed. Otherwise, the structures will be freed | |
365 | when the device is released. | |
366 | ||
367 | ======================================================================*/ | |
368 | ||
fba395ee | 369 | static void serial_detach(struct pcmcia_device *link) |
1da177e4 LT |
370 | { |
371 | struct serial_info *info = link->priv; | |
1da177e4 LT |
372 | |
373 | DEBUG(0, "serial_detach(0x%p)\n", link); | |
374 | ||
1da177e4 LT |
375 | /* |
376 | * Ensure any outstanding scheduled tasks are completed. | |
377 | */ | |
378 | flush_scheduled_work(); | |
379 | ||
380 | /* | |
381 | * Ensure that the ports have been released. | |
382 | */ | |
383 | serial_remove(link); | |
384 | ||
b4635811 | 385 | /* free bits */ |
1da177e4 LT |
386 | kfree(info); |
387 | } | |
388 | ||
389 | /*====================================================================*/ | |
390 | ||
fba395ee | 391 | static int setup_serial(struct pcmcia_device *handle, struct serial_info * info, |
906da809 | 392 | unsigned int iobase, int irq) |
1da177e4 LT |
393 | { |
394 | struct uart_port port; | |
395 | int line; | |
396 | ||
397 | memset(&port, 0, sizeof (struct uart_port)); | |
398 | port.iobase = iobase; | |
399 | port.irq = irq; | |
400 | port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; | |
401 | port.uartclk = 1843200; | |
402 | port.dev = &handle_to_dev(handle); | |
403 | if (buggy_uart) | |
404 | port.flags |= UPF_BUGGY_UART; | |
f3d10688 RK |
405 | |
406 | if (info->quirk && info->quirk->setup) | |
407 | info->quirk->setup(handle, &port); | |
408 | ||
1da177e4 LT |
409 | line = serial8250_register_port(&port); |
410 | if (line < 0) { | |
411 | printk(KERN_NOTICE "serial_cs: serial8250_register_port() at " | |
412 | "0x%04lx, irq %d failed\n", (u_long)iobase, irq); | |
413 | return -EINVAL; | |
414 | } | |
415 | ||
416 | info->line[info->ndev] = line; | |
417 | sprintf(info->node[info->ndev].dev_name, "ttyS%d", line); | |
418 | info->node[info->ndev].major = TTY_MAJOR; | |
419 | info->node[info->ndev].minor = 0x40 + line; | |
420 | if (info->ndev > 0) | |
421 | info->node[info->ndev - 1].next = &info->node[info->ndev]; | |
422 | info->ndev++; | |
423 | ||
424 | return 0; | |
425 | } | |
426 | ||
427 | /*====================================================================*/ | |
428 | ||
429 | static int | |
fba395ee | 430 | first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse) |
1da177e4 LT |
431 | { |
432 | int i; | |
433 | i = pcmcia_get_first_tuple(handle, tuple); | |
4c89e88b | 434 | if (i != 0) |
635d19be | 435 | return i; |
1da177e4 | 436 | i = pcmcia_get_tuple_data(handle, tuple); |
4c89e88b | 437 | if (i != 0) |
1da177e4 LT |
438 | return i; |
439 | return pcmcia_parse_tuple(handle, tuple, parse); | |
440 | } | |
441 | ||
84e2d340 DB |
442 | /*====================================================================*/ |
443 | ||
444 | static int simple_config_check(struct pcmcia_device *p_dev, | |
445 | cistpl_cftable_entry_t *cf, | |
8e2fc39d | 446 | cistpl_cftable_entry_t *dflt, |
ad913c11 | 447 | unsigned int vcc, |
84e2d340 | 448 | void *priv_data) |
1da177e4 | 449 | { |
84e2d340 DB |
450 | static const int size_table[2] = { 8, 16 }; |
451 | int *try = priv_data; | |
452 | ||
453 | if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) | |
454 | p_dev->conf.Vpp = | |
455 | cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; | |
456 | ||
457 | if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)]) | |
458 | && (cf->io.win[0].base != 0)) { | |
84e2d340 DB |
459 | p_dev->io.BasePort1 = cf->io.win[0].base; |
460 | p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ? | |
461 | 16 : cf->io.flags & CISTPL_IO_LINES_MASK; | |
462 | if (!pcmcia_request_io(p_dev, &p_dev->io)) | |
463 | return 0; | |
464 | } | |
465 | return -EINVAL; | |
1da177e4 LT |
466 | } |
467 | ||
84e2d340 DB |
468 | static int simple_config_check_notpicky(struct pcmcia_device *p_dev, |
469 | cistpl_cftable_entry_t *cf, | |
8e2fc39d | 470 | cistpl_cftable_entry_t *dflt, |
ad913c11 | 471 | unsigned int vcc, |
84e2d340 DB |
472 | void *priv_data) |
473 | { | |
474 | static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; | |
475 | int j; | |
476 | ||
477 | if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { | |
84e2d340 DB |
478 | for (j = 0; j < 5; j++) { |
479 | p_dev->io.BasePort1 = base[j]; | |
480 | p_dev->io.IOAddrLines = base[j] ? 16 : 3; | |
481 | if (!pcmcia_request_io(p_dev, &p_dev->io)) | |
482 | return 0; | |
483 | } | |
484 | } | |
485 | return -ENODEV; | |
486 | } | |
1da177e4 | 487 | |
fba395ee | 488 | static int simple_config(struct pcmcia_device *link) |
1da177e4 | 489 | { |
1da177e4 | 490 | struct serial_info *info = link->priv; |
ef313e36 | 491 | int i = -ENODEV, try; |
16f31113 | 492 | |
1da177e4 | 493 | /* If the card is already configured, look up the port and irq */ |
ef313e36 | 494 | if (link->function_config) { |
906da809 | 495 | unsigned int port = 0; |
ef313e36 DB |
496 | if ((link->io.BasePort2 != 0) && |
497 | (link->io.NumPorts2 == 8)) { | |
498 | port = link->io.BasePort2; | |
1da177e4 LT |
499 | info->slave = 1; |
500 | } else if ((info->manfid == MANFID_OSITECH) && | |
ef313e36 DB |
501 | (link->io.NumPorts1 == 0x40)) { |
502 | port = link->io.BasePort1 + 0x28; | |
1da177e4 LT |
503 | info->slave = 1; |
504 | } | |
16f31113 | 505 | if (info->slave) { |
ef313e36 DB |
506 | return setup_serial(link, info, port, |
507 | link->irq.AssignedIRQ); | |
16f31113 | 508 | } |
1da177e4 | 509 | } |
1da177e4 | 510 | |
84e2d340 DB |
511 | /* First pass: look for a config entry that looks normal. |
512 | * Two tries: without IO aliases, then with aliases */ | |
513 | for (try = 0; try < 4; try++) | |
514 | if (!pcmcia_loop_config(link, simple_config_check, &try)) | |
515 | goto found_port; | |
516 | ||
1da177e4 LT |
517 | /* Second pass: try to find an entry that isn't picky about |
518 | its base address, then try to grab any standard serial port | |
519 | address, and finally try to get any free port. */ | |
84e2d340 DB |
520 | if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) |
521 | goto found_port; | |
1da177e4 | 522 | |
84e2d340 DB |
523 | printk(KERN_NOTICE |
524 | "serial_cs: no usable port range found, giving up\n"); | |
525 | cs_error(link, RequestIO, i); | |
526 | return -1; | |
1da177e4 | 527 | |
84e2d340 | 528 | found_port: |
fba395ee | 529 | i = pcmcia_request_irq(link, &link->irq); |
4c89e88b | 530 | if (i != 0) { |
fba395ee | 531 | cs_error(link, RequestIRQ, i); |
1da177e4 LT |
532 | link->irq.AssignedIRQ = 0; |
533 | } | |
534 | if (info->multi && (info->manfid == MANFID_3COM)) | |
535 | link->conf.ConfigIndex &= ~(0x08); | |
efd92dfa RK |
536 | |
537 | /* | |
538 | * Apply any configuration quirks. | |
539 | */ | |
540 | if (info->quirk && info->quirk->config) | |
541 | info->quirk->config(link); | |
542 | ||
fba395ee | 543 | i = pcmcia_request_configuration(link, &link->conf); |
4c89e88b | 544 | if (i != 0) { |
fba395ee | 545 | cs_error(link, RequestConfiguration, i); |
1da177e4 LT |
546 | return -1; |
547 | } | |
fba395ee | 548 | return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); |
1da177e4 LT |
549 | } |
550 | ||
84e2d340 DB |
551 | static int multi_config_check(struct pcmcia_device *p_dev, |
552 | cistpl_cftable_entry_t *cf, | |
8e2fc39d | 553 | cistpl_cftable_entry_t *dflt, |
ad913c11 | 554 | unsigned int vcc, |
84e2d340 | 555 | void *priv_data) |
1da177e4 | 556 | { |
84e2d340 DB |
557 | int *base2 = priv_data; |
558 | ||
559 | /* The quad port cards have bad CIS's, so just look for a | |
560 | window larger than 8 ports and assume it will be right */ | |
561 | if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { | |
84e2d340 DB |
562 | p_dev->io.BasePort1 = cf->io.win[0].base; |
563 | p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; | |
564 | if (!pcmcia_request_io(p_dev, &p_dev->io)) { | |
565 | *base2 = p_dev->io.BasePort1 + 8; | |
566 | return 0; | |
567 | } | |
568 | } | |
569 | return -ENODEV; | |
570 | } | |
16f31113 | 571 | |
84e2d340 DB |
572 | static int multi_config_check_notpicky(struct pcmcia_device *p_dev, |
573 | cistpl_cftable_entry_t *cf, | |
8e2fc39d | 574 | cistpl_cftable_entry_t *dflt, |
ad913c11 | 575 | unsigned int vcc, |
84e2d340 DB |
576 | void *priv_data) |
577 | { | |
578 | int *base2 = priv_data; | |
579 | ||
580 | if (cf->io.nwin == 2) { | |
84e2d340 DB |
581 | p_dev->io.BasePort1 = cf->io.win[0].base; |
582 | p_dev->io.BasePort2 = cf->io.win[1].base; | |
583 | p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; | |
584 | if (!pcmcia_request_io(p_dev, &p_dev->io)) { | |
585 | *base2 = p_dev->io.BasePort2; | |
586 | return 0; | |
587 | } | |
588 | } | |
589 | return -ENODEV; | |
590 | } | |
1da177e4 | 591 | |
84e2d340 DB |
592 | static int multi_config(struct pcmcia_device *link) |
593 | { | |
594 | struct serial_info *info = link->priv; | |
595 | int i, base2 = 0; | |
1da177e4 LT |
596 | |
597 | /* First, look for a generic full-sized window */ | |
598 | link->io.NumPorts1 = info->multi * 8; | |
84e2d340 DB |
599 | if (pcmcia_loop_config(link, multi_config_check, &base2)) { |
600 | /* If that didn't work, look for two windows */ | |
1da177e4 LT |
601 | link->io.NumPorts1 = link->io.NumPorts2 = 8; |
602 | info->multi = 2; | |
84e2d340 DB |
603 | if (pcmcia_loop_config(link, multi_config_check_notpicky, |
604 | &base2)) { | |
605 | printk(KERN_NOTICE "serial_cs: no usable port range" | |
606 | "found, giving up\n"); | |
607 | return -ENODEV; | |
1da177e4 LT |
608 | } |
609 | } | |
610 | ||
fba395ee | 611 | i = pcmcia_request_irq(link, &link->irq); |
4c89e88b | 612 | if (i != 0) { |
84e2d340 | 613 | /* FIXME: comment does not fit, error handling does not fit */ |
1da177e4 LT |
614 | printk(KERN_NOTICE |
615 | "serial_cs: no usable port range found, giving up\n"); | |
fba395ee | 616 | cs_error(link, RequestIRQ, i); |
1da177e4 LT |
617 | link->irq.AssignedIRQ = 0; |
618 | } | |
efd92dfa RK |
619 | |
620 | /* | |
621 | * Apply any configuration quirks. | |
622 | */ | |
623 | if (info->quirk && info->quirk->config) | |
624 | info->quirk->config(link); | |
625 | ||
fba395ee | 626 | i = pcmcia_request_configuration(link, &link->conf); |
4c89e88b | 627 | if (i != 0) { |
fba395ee | 628 | cs_error(link, RequestConfiguration, i); |
84e2d340 | 629 | return -ENODEV; |
1da177e4 LT |
630 | } |
631 | ||
632 | /* The Oxford Semiconductor OXCF950 cards are in fact single-port: | |
30bac7aa PV |
633 | * 8 registers are for the UART, the others are extra registers. |
634 | * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. | |
635 | */ | |
636 | if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && | |
637 | info->prodid == PRODID_POSSIO_GCC)) { | |
638 | int err; | |
639 | ||
84e2d340 DB |
640 | if (link->conf.ConfigIndex == 1 || |
641 | link->conf.ConfigIndex == 3) { | |
30bac7aa PV |
642 | err = setup_serial(link, info, base2, |
643 | link->irq.AssignedIRQ); | |
644 | base2 = link->io.BasePort1; | |
1da177e4 | 645 | } else { |
30bac7aa PV |
646 | err = setup_serial(link, info, link->io.BasePort1, |
647 | link->irq.AssignedIRQ); | |
1da177e4 | 648 | } |
30bac7aa | 649 | info->c950ctrl = base2; |
7ef057fa RK |
650 | |
651 | /* | |
652 | * FIXME: We really should wake up the port prior to | |
653 | * handing it over to the serial layer. | |
654 | */ | |
655 | if (info->quirk && info->quirk->wakeup) | |
656 | info->quirk->wakeup(link); | |
657 | ||
84e2d340 | 658 | return 0; |
1da177e4 LT |
659 | } |
660 | ||
fba395ee | 661 | setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); |
1da177e4 | 662 | for (i = 0; i < info->multi - 1; i++) |
fba395ee | 663 | setup_serial(link, info, base2 + (8 * i), |
16f31113 | 664 | link->irq.AssignedIRQ); |
84e2d340 | 665 | return 0; |
1da177e4 LT |
666 | } |
667 | ||
668 | /*====================================================================== | |
669 | ||
670 | serial_config() is scheduled to run after a CARD_INSERTION event | |
671 | is received, to configure the PCMCIA socket, and to make the | |
672 | serial device available to the system. | |
673 | ||
674 | ======================================================================*/ | |
675 | ||
15b99ac1 | 676 | static int serial_config(struct pcmcia_device * link) |
1da177e4 | 677 | { |
1da177e4 | 678 | struct serial_info *info = link->priv; |
16f31113 YR |
679 | struct serial_cfg_mem *cfg_mem; |
680 | tuple_t *tuple; | |
681 | u_char *buf; | |
682 | cisparse_t *parse; | |
683 | cistpl_cftable_entry_t *cf; | |
af2b3b50 | 684 | int i; |
1da177e4 LT |
685 | |
686 | DEBUG(0, "serial_config(0x%p)\n", link); | |
687 | ||
16f31113 YR |
688 | cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); |
689 | if (!cfg_mem) | |
690 | goto failed; | |
691 | ||
692 | tuple = &cfg_mem->tuple; | |
693 | parse = &cfg_mem->parse; | |
694 | cf = &parse->cftable_entry; | |
695 | buf = cfg_mem->buf; | |
696 | ||
697 | tuple->TupleData = (cisdata_t *) buf; | |
698 | tuple->TupleOffset = 0; | |
699 | tuple->TupleDataMax = 255; | |
700 | tuple->Attributes = 0; | |
1da177e4 | 701 | |
1da177e4 | 702 | /* Is this a compliant multifunction card? */ |
16f31113 YR |
703 | tuple->DesiredTuple = CISTPL_LONGLINK_MFC; |
704 | tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK; | |
4c89e88b | 705 | info->multi = (first_tuple(link, tuple, parse) == 0); |
1da177e4 LT |
706 | |
707 | /* Is this a multiport card? */ | |
16f31113 | 708 | tuple->DesiredTuple = CISTPL_MANFID; |
efd50585 DB |
709 | info->manfid = link->manf_id; |
710 | info->prodid = link->card_id; | |
711 | ||
712 | for (i = 0; i < ARRAY_SIZE(quirks); i++) | |
713 | if ((quirks[i].manfid == ~0 || | |
714 | quirks[i].manfid == info->manfid) && | |
715 | (quirks[i].prodid == ~0 || | |
716 | quirks[i].prodid == info->prodid)) { | |
717 | info->quirk = &quirks[i]; | |
718 | break; | |
719 | } | |
1da177e4 LT |
720 | |
721 | /* Another check for dual-serial cards: look for either serial or | |
722 | multifunction cards that ask for appropriate IO port ranges */ | |
16f31113 | 723 | tuple->DesiredTuple = CISTPL_FUNCID; |
1da177e4 | 724 | if ((info->multi == 0) && |
efd50585 DB |
725 | (link->has_func_id) && |
726 | ((link->func_id == CISTPL_FUNCID_MULTI) || | |
727 | (link->func_id == CISTPL_FUNCID_SERIAL))) { | |
16f31113 | 728 | tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; |
4c89e88b | 729 | if (first_tuple(link, tuple, parse) == 0) { |
1da177e4 LT |
730 | if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0)) |
731 | info->multi = cf->io.win[0].len >> 3; | |
732 | if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) && | |
733 | (cf->io.win[1].len == 8)) | |
734 | info->multi = 2; | |
735 | } | |
736 | } | |
737 | ||
1fbbac4b RK |
738 | /* |
739 | * Apply any multi-port quirk. | |
740 | */ | |
741 | if (info->quirk && info->quirk->multi != -1) | |
742 | info->multi = info->quirk->multi; | |
743 | ||
1da177e4 LT |
744 | if (info->multi > 1) |
745 | multi_config(link); | |
746 | else | |
747 | simple_config(link); | |
748 | ||
749 | if (info->ndev == 0) | |
750 | goto failed; | |
751 | ||
eee3a883 RK |
752 | /* |
753 | * Apply any post-init quirk. FIXME: This should really happen | |
754 | * before we register the port, since it might already be in use. | |
755 | */ | |
756 | if (info->quirk && info->quirk->post) | |
757 | if (info->quirk->post(link)) | |
758 | goto failed; | |
1da177e4 | 759 | |
fd238232 | 760 | link->dev_node = &info->node[0]; |
16f31113 | 761 | kfree(cfg_mem); |
15b99ac1 | 762 | return 0; |
1da177e4 | 763 | |
1da177e4 LT |
764 | failed: |
765 | serial_remove(link); | |
16f31113 | 766 | kfree(cfg_mem); |
15b99ac1 | 767 | return -ENODEV; |
1da177e4 LT |
768 | } |
769 | ||
325aa29f DB |
770 | static struct pcmcia_device_id serial_ids[] = { |
771 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), | |
772 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), | |
773 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), | |
774 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), | |
775 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), | |
776 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), | |
777 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), | |
778 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), | |
779 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), | |
780 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), | |
781 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), | |
782 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), | |
f4d7510d JK |
783 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), |
784 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), | |
325aa29f DB |
785 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), |
786 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), | |
787 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), | |
788 | PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), | |
789 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), | |
790 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), | |
791 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), | |
792 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), | |
793 | PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), | |
d277ad0e | 794 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), |
325aa29f DB |
795 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), |
796 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), | |
797 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), | |
798 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), | |
799 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), | |
800 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), | |
40738f3f K |
801 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), |
802 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064), | |
d277ad0e K |
803 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), |
804 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), | |
325aa29f DB |
805 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), |
806 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), | |
807 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), | |
d277ad0e | 808 | PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), |
40738f3f K |
809 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), |
810 | PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), | |
325aa29f DB |
811 | PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), |
812 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), | |
813 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), | |
814 | PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), | |
815 | PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), | |
816 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), | |
817 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), | |
818 | PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), | |
819 | PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), | |
820 | PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), | |
821 | PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), | |
1de9cedf | 822 | PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), |
325aa29f DB |
823 | PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), |
824 | PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), | |
825 | PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), | |
826 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), | |
827 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), | |
828 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), | |
829 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), | |
830 | PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), | |
831 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), | |
832 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), | |
833 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), | |
834 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), | |
835 | PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), | |
836 | PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), | |
837 | PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), | |
838 | PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), | |
839 | PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), | |
840 | PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), | |
1de9cedf | 841 | PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), |
325aa29f DB |
842 | PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), |
843 | PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), | |
844 | PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), | |
845 | PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), | |
846 | PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), | |
847 | PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), | |
848 | PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), | |
849 | PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), | |
d277ad0e | 850 | PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), |
325aa29f DB |
851 | PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), |
852 | PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), | |
853 | PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), | |
854 | PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), | |
855 | PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), | |
856 | PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), | |
857 | PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), | |
bb289bc4 | 858 | PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d), |
325aa29f DB |
859 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"), |
860 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"), | |
861 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"), | |
862 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"), | |
863 | PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"), | |
864 | PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"), | |
865 | PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"), | |
866 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "3CCFEM556.cis"), | |
867 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"), | |
868 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "3CXEM556.cis"), | |
869 | PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "3CXEM556.cis"), | |
64da82ef | 870 | PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ |
a42f0dc4 | 871 | PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ |
f542ff6d DB |
872 | PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ |
873 | PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ | |
325aa29f DB |
874 | PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "MT5634ZLX.cis"), |
875 | PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"), | |
876 | PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"), | |
877 | PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "RS-COM-2P.cis"), | |
fec21889 | 878 | PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "GLOBETROTTER.cis"), |
44e5e33e TO |
879 | PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b), |
880 | PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83), | |
881 | PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490), | |
882 | PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235), | |
883 | PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3), | |
884 | PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442), | |
885 | PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190), | |
886 | PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262), | |
887 | PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d), | |
888 | PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa), | |
889 | PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903), | |
890 | PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676), | |
891 | PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767), | |
892 | PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), | |
893 | PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), | |
894 | PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), | |
895 | PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), | |
896 | PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc), | |
897 | PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), | |
898 | PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), | |
899 | PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), | |
900 | PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), | |
901 | PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), | |
902 | PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), | |
9d9b7ad7 | 903 | PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b), |
325aa29f DB |
904 | /* too generic */ |
905 | /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ | |
906 | /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ | |
907 | PCMCIA_DEVICE_FUNC_ID(2), | |
908 | PCMCIA_DEVICE_NULL, | |
909 | }; | |
910 | MODULE_DEVICE_TABLE(pcmcia, serial_ids); | |
911 | ||
1da177e4 LT |
912 | static struct pcmcia_driver serial_cs_driver = { |
913 | .owner = THIS_MODULE, | |
914 | .drv = { | |
915 | .name = "serial_cs", | |
916 | }, | |
f8cfa618 | 917 | .probe = serial_probe, |
cc3b4866 | 918 | .remove = serial_detach, |
325aa29f | 919 | .id_table = serial_ids, |
98e4c28b DB |
920 | .suspend = serial_suspend, |
921 | .resume = serial_resume, | |
1da177e4 LT |
922 | }; |
923 | ||
924 | static int __init init_serial_cs(void) | |
925 | { | |
926 | return pcmcia_register_driver(&serial_cs_driver); | |
927 | } | |
928 | ||
929 | static void __exit exit_serial_cs(void) | |
930 | { | |
931 | pcmcia_unregister_driver(&serial_cs_driver); | |
1da177e4 LT |
932 | } |
933 | ||
934 | module_init(init_serial_cs); | |
935 | module_exit(exit_serial_cs); | |
936 | ||
937 | MODULE_LICENSE("GPL"); |