[deliverable/linux.git] / drivers / spi / Kconfig

#
# SPI driver configuration
#
# NOTE:  the reason this doesn't show SPI slave support is mostly that
# nobody's needed a slave side API yet.  The master-role API is not
# fully appropriate there, so it'd need some thought to do well.
#
menuconfig SPI
	bool "SPI support"
	depends on HAS_IOMEM
	help
	  The "Serial Peripheral Interface" is a low level synchronous
	  protocol.  Chips that support SPI can have data transfer rates
	  up to several tens of Mbit/sec.  Chips are addressed with a
	  controller and a chipselect.  Most SPI slaves don't support
	  dynamic device discovery; some are even write-only or read-only.

	  SPI is widely used by microcontrollers to talk with sensors,
	  eeprom and flash memory, codecs and various other controller
	  chips, analog to digital (and d-to-a) converters, and more.
	  MMC and SD cards can be accessed using SPI protocol; and for
	  DataFlash cards used in MMC sockets, SPI must always be used.

	  SPI is one of a family of similar protocols using a four wire
	  interface (select, clock, data in, data out) including Microwire
	  (half duplex), SSP, SSI, and PSP.  This driver framework should
	  work with most such devices and controllers.

if SPI

config SPI_DEBUG
	boolean "Debug support for SPI drivers"
	depends on DEBUG_KERNEL
	help
	  Say "yes" to enable debug messaging (like dev_dbg and pr_debug),
	  sysfs, and debugfs support in SPI controller and protocol drivers.

#
# MASTER side ... talking to discrete SPI slave chips including microcontrollers
#

config SPI_MASTER
#	boolean "SPI Master Support"
	boolean
	default SPI
	help
	  If your system has an master-capable SPI controller (which
	  provides the clock and chipselect), you can enable that
	  controller and the protocol drivers for the SPI slave chips
	  that are connected.

if SPI_MASTER

comment "SPI Master Controller Drivers"

config SPI_ATMEL
	tristate "Atmel SPI Controller"
	depends on (ARCH_AT91 || AVR32)
	help
	  This selects a driver for the Atmel SPI Controller, present on
	  many AT32 (AVR32) and AT91 (ARM) chips.

config SPI_BFIN
	tristate "SPI controller driver for ADI Blackfin5xx"
	depends on BLACKFIN
	help
	  This is the SPI controller master driver for Blackfin 5xx processor.

config SPI_AU1550
	tristate "Au1550/Au12x0 SPI Controller"
	depends on (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL
	select SPI_BITBANG
	help
	  If you say yes to this option, support will be included for the
	  Au1550 SPI controller (may also work with Au1200,Au1210,Au1250).

	  This driver can also be built as a module.  If so, the module
	  will be called au1550_spi.

config SPI_BITBANG
	tristate "Utilities for Bitbanging SPI masters"
	help
	  With a few GPIO pins, your system can bitbang the SPI protocol.
	  Select this to get SPI support through I/O pins (GPIO, parallel
	  port, etc).  Or, some systems' SPI master controller drivers use
	  this code to manage the per-word or per-transfer accesses to the
	  hardware shift registers.

	  This is library code, and is automatically selected by drivers that
	  need it.  You only need to select this explicitly to support driver
	  modules that aren't part of this kernel tree.

config SPI_BUTTERFLY
	tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)"
	depends on PARPORT
	select SPI_BITBANG
	help
	  This uses a custom parallel port cable to connect to an AVR
	  Butterfly <http://www.atmel.com/products/avr/butterfly>, an
	  inexpensive battery powered microcontroller evaluation board.
	  This same cable can be used to flash new firmware.

config SPI_COLDFIRE_QSPI
	tristate "Freescale Coldfire QSPI controller"
	depends on (M520x || M523x || M5249 || M527x || M528x || M532x)
	help
	  This enables support for the Coldfire QSPI controller in master
	  mode.

	  This driver can also be built as a module.  If so, the module
	  will be called coldfire_qspi.

config SPI_DAVINCI
	tristate "SPI controller driver for DaVinci/DA8xx SoC's"
	depends on SPI_MASTER && ARCH_DAVINCI
	select SPI_BITBANG
	help
	  SPI master controller for DaVinci and DA8xx SPI modules.

config SPI_EP93XX
	tristate "Cirrus Logic EP93xx SPI controller"
	depends on ARCH_EP93XX
	help
	  This enables using the Cirrus EP93xx SPI controller in master
	  mode.

	  To compile this driver as a module, choose M here. The module will be
	  called ep93xx_spi.

config SPI_GPIO
	tristate "GPIO-based bitbanging SPI Master"
	depends on GENERIC_GPIO
	select SPI_BITBANG
	help
	  This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
	  interface to manage MOSI, MISO, SCK, and chipselect signals.  SPI
	  slaves connected to a bus using this driver are configured as usual,
	  except that the spi_board_info.controller_data holds the GPIO number
	  for the chipselect used by this controller driver.

	  Note that this driver often won't achieve even 1 Mbit/sec speeds,
	  making it unusually slow for SPI.  If your platform can inline
	  GPIO operations, you should be able to leverage that for better
	  speed with a custom version of this driver; see the source code.

config SPI_IMX
	tristate "Freescale i.MX SPI controllers"
	depends on ARCH_MXC
	select SPI_BITBANG
	help
	  This enables using the Freescale i.MX SPI controllers in master
	  mode.

config SPI_LM70_LLP
	tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)"
	depends on PARPORT && EXPERIMENTAL
	select SPI_BITBANG
	help
	  This driver supports the NS LM70 LLP Evaluation Board,
	  which interfaces to an LM70 temperature sensor using
	  a parallel port.

config SPI_MPC52xx
	tristate "Freescale MPC52xx SPI (non-PSC) controller support"
	depends on PPC_MPC52xx && SPI
	select SPI_MASTER_OF
	help
	  This drivers supports the MPC52xx SPI controller in master SPI
	  mode.

config SPI_MPC52xx_PSC
	tristate "Freescale MPC52xx PSC SPI controller"
	depends on PPC_MPC52xx && EXPERIMENTAL
	help
	  This enables using the Freescale MPC52xx Programmable Serial
	  Controller in master SPI mode.

config SPI_MPC512x_PSC
	tristate "Freescale MPC512x PSC SPI controller"
	depends on SPI_MASTER && PPC_MPC512x
	help
	  This enables using the Freescale MPC5121 Programmable Serial
	  Controller in SPI master mode.

config SPI_FSL_LIB
	tristate
	depends on FSL_SOC

config SPI_FSL_SPI
	tristate "Freescale SPI controller"
	depends on FSL_SOC
	select SPI_FSL_LIB
	help
	  This enables using the Freescale SPI controllers in master mode.
	  MPC83xx platform uses the controller in cpu mode or CPM/QE mode.
	  MPC8569 uses the controller in QE mode, MPC8610 in cpu mode.

config SPI_OMAP_UWIRE
	tristate "OMAP1 MicroWire"
	depends on ARCH_OMAP1
	select SPI_BITBANG
	help
	  This hooks up to the MicroWire controller on OMAP1 chips.

config SPI_OMAP24XX
	tristate "McSPI driver for OMAP"
	depends on ARCH_OMAP2PLUS
	help
	  SPI master controller for OMAP24XX and later Multichannel SPI
	  (McSPI) modules.

config SPI_OMAP_100K
	tristate "OMAP SPI 100K"
	depends on SPI_MASTER && (ARCH_OMAP850 || ARCH_OMAP730)
	help
	  OMAP SPI 100K master controller for omap7xx boards.

config SPI_ORION
	tristate "Orion SPI master (EXPERIMENTAL)"
	depends on PLAT_ORION && EXPERIMENTAL
	help
	  This enables using the SPI master controller on the Orion chips.

config SPI_PL022
	tristate "ARM AMBA PL022 SSP controller (EXPERIMENTAL)"
	depends on ARM_AMBA && EXPERIMENTAL
	default y if MACH_U300
	default y if ARCH_REALVIEW
	default y if INTEGRATOR_IMPD1
	default y if ARCH_VERSATILE
	help
	  This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
	  controller. If you have an embedded system with an AMBA(R)
	  bus and a PL022 controller, say Y or M here.

config SPI_PPC4xx
	tristate "PPC4xx SPI Controller"
	depends on PPC32 && 4xx && SPI_MASTER
	select SPI_BITBANG
	help
	  This selects a driver for the PPC4xx SPI Controller.

config SPI_PXA2XX
	tristate "PXA2xx SSP SPI master"
	depends on ARCH_PXA && EXPERIMENTAL
	select PXA_SSP
	help
	  This enables using a PXA2xx SSP port as a SPI master controller.
	  The driver can be configured to use any SSP port and additional
	  documentation can be found a Documentation/spi/pxa2xx.

config SPI_S3C24XX
	tristate "Samsung S3C24XX series SPI"
	depends on ARCH_S3C2410 && EXPERIMENTAL
	select SPI_BITBANG
	help
	  SPI driver for Samsung S3C24XX series ARM SoCs

config SPI_S3C24XX_FIQ
	bool "S3C24XX driver with FIQ pseudo-DMA"
	depends on SPI_S3C24XX
	select FIQ
	help
	  Enable FIQ support for the S3C24XX SPI driver to provide pseudo
	  DMA by using the fast-interrupt request framework, This allows
	  the driver to get DMA-like performance when there are either
	  no free DMA channels, or when doing transfers that required both
	  TX and RX data paths.

config SPI_S3C24XX_GPIO
	tristate "Samsung S3C24XX series SPI by GPIO"
	depends on ARCH_S3C2410 && EXPERIMENTAL
	select SPI_BITBANG
	help
	  SPI driver for Samsung S3C24XX series ARM SoCs using
	  GPIO lines to provide the SPI bus. This can be used where
	  the inbuilt hardware cannot provide the transfer mode, or
	  where the board is using non hardware connected pins.

config SPI_S3C64XX
	tristate "Samsung S3C64XX series type SPI"
	depends on ARCH_S3C64XX && EXPERIMENTAL
	select S3C64XX_DMA
	help
	  SPI driver for Samsung S3C64XX and newer SoCs.

config SPI_SH_MSIOF
	tristate "SuperH MSIOF SPI controller"
	depends on SUPERH && HAVE_CLK
	select SPI_BITBANG
	help
	  SPI driver for SuperH MSIOF blocks.

config SPI_SH_SCI
	tristate "SuperH SCI SPI controller"
	depends on SUPERH
	select SPI_BITBANG
	help
	  SPI driver for SuperH SCI blocks.

config SPI_STMP3XXX
	tristate "Freescale STMP37xx/378x SPI/SSP controller"
	depends on ARCH_STMP3XXX && SPI_MASTER
	help
	  SPI driver for Freescale STMP37xx/378x SoC SSP interface

config SPI_TOPCLIFF_PCH
	tristate "Topcliff PCH SPI Controller"
	depends on PCI
	help
	  SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus
	  used in some x86 embedded processors.

config SPI_TXX9
	tristate "Toshiba TXx9 SPI controller"
	depends on GENERIC_GPIO && CPU_TX49XX
	help
	  SPI driver for Toshiba TXx9 MIPS SoCs

config SPI_XILINX
	tristate "Xilinx SPI controller common module"
	depends on HAS_IOMEM && EXPERIMENTAL
	select SPI_BITBANG
	select SPI_XILINX_OF if (XILINX_VIRTEX || MICROBLAZE)
	help
	  This exposes the SPI controller IP from the Xilinx EDK.

	  See the "OPB Serial Peripheral Interface (SPI) (v1.00e)"
	  Product Specification document (DS464) for hardware details.

	  Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)"

config SPI_XILINX_OF
	tristate "Xilinx SPI controller OF device"
	depends on SPI_XILINX && (XILINX_VIRTEX || MICROBLAZE)
	help
	  This is the OF driver for the SPI controller IP from the Xilinx EDK.

config SPI_XILINX_PLTFM
	tristate "Xilinx SPI controller platform device"
	depends on SPI_XILINX
	help
	  This is the platform driver for the SPI controller IP
	  from the Xilinx EDK.

config SPI_NUC900
	tristate "Nuvoton NUC900 series SPI"
	depends on ARCH_W90X900 && EXPERIMENTAL
	select SPI_BITBANG
	help
	  SPI driver for Nuvoton NUC900 series ARM SoCs

#
# Add new SPI master controllers in alphabetical order above this line
#

config SPI_DESIGNWARE
	tristate "DesignWare SPI controller core support"
	depends on SPI_MASTER
	help
	  general driver for SPI controller core from DesignWare

config SPI_DW_PCI
	tristate "PCI interface driver for DW SPI core"
	depends on SPI_DESIGNWARE && PCI

config SPI_DW_MMIO
	tristate "Memory-mapped io interface driver for DW SPI core"
	depends on SPI_DESIGNWARE && HAVE_CLK

#
# There are lots of SPI device types, with sensors and memory
# being probably the most widely used ones.
#
comment "SPI Protocol Masters"

config SPI_SPIDEV
	tristate "User mode SPI device driver support"
	depends on EXPERIMENTAL
	help
	  This supports user mode SPI protocol drivers.

	  Note that this application programming interface is EXPERIMENTAL
	  and hence SUBJECT TO CHANGE WITHOUT NOTICE while it stabilizes.

config SPI_TLE62X0
	tristate "Infineon TLE62X0 (for power switching)"
	depends on SYSFS
	help
	  SPI driver for Infineon TLE62X0 series line driver chips,
	  such as the TLE6220, TLE6230 and TLE6240.  This provides a
	  sysfs interface, with each line presented as a kind of GPIO
	  exposing both switch control and diagnostic feedback.

#
# Add new SPI protocol masters in alphabetical order above this line
#

endif # SPI_MASTER

# (slave support would go here)

endif # SPI
Commit	Line	Data
8ae12a0d DB	1	#
	2	# SPI driver configuration
	3	#
	4	# NOTE: the reason this doesn't show SPI slave support is mostly that
	5	# nobody's needed a slave side API yet. The master-role API is not
	6	# fully appropriate there, so it'd need some thought to do well.
	7	#
79d8c7a8	8	menuconfig SPI
8ae12a0d	9	bool "SPI support"
79d8c7a8	10	depends on HAS_IOMEM
8ae12a0d DB	11	help
	12	The "Serial Peripheral Interface" is a low level synchronous
	13	protocol. Chips that support SPI can have data transfer rates
	14	up to several tens of Mbit/sec. Chips are addressed with a
	15	controller and a chipselect. Most SPI slaves don't support
	16	dynamic device discovery; some are even write-only or read-only.
	17
3cb2fccc	18	SPI is widely used by microcontrollers to talk with sensors,
8ae12a0d DB	19	eeprom and flash memory, codecs and various other controller
	20	chips, analog to digital (and d-to-a) converters, and more.
	21	MMC and SD cards can be accessed using SPI protocol; and for
	22	DataFlash cards used in MMC sockets, SPI must always be used.
	23
	24	SPI is one of a family of similar protocols using a four wire
	25	interface (select, clock, data in, data out) including Microwire
	26	(half duplex), SSP, SSI, and PSP. This driver framework should
	27	work with most such devices and controllers.
	28
79d8c7a8 AG	29	if SPI
79d8c7a8 AG	30
8ae12a0d DB	31	config SPI_DEBUG
8ae12a0d DB	32	boolean "Debug support for SPI drivers"
79d8c7a8	33	depends on DEBUG_KERNEL
8ae12a0d DB	34	help
	35	Say "yes" to enable debug messaging (like dev_dbg and pr_debug),
	36	sysfs, and debugfs support in SPI controller and protocol drivers.
	37
	38	#
	39	# MASTER side ... talking to discrete SPI slave chips including microcontrollers
	40	#
	41
	42	config SPI_MASTER
	43	# boolean "SPI Master Support"
	44	boolean
	45	default SPI
	46	help
	47	If your system has an master-capable SPI controller (which
	48	provides the clock and chipselect), you can enable that
	49	controller and the protocol drivers for the SPI slave chips
	50	that are connected.
	51
6291fe2a RD	52	if SPI_MASTER
6291fe2a RD	53
8ae12a0d	54	comment "SPI Master Controller Drivers"
8ae12a0d	55
754ce4f2 HS	56	config SPI_ATMEL
754ce4f2 HS	57	tristate "Atmel SPI Controller"
6291fe2a	58	depends on (ARCH_AT91 \|\| AVR32)
754ce4f2 HS	59	help
	60	This selects a driver for the Atmel SPI Controller, present on
	61	many AT32 (AVR32) and AT91 (ARM) chips.
	62
a5f6abd4 WB	63	config SPI_BFIN
a5f6abd4 WB	64	tristate "SPI controller driver for ADI Blackfin5xx"
6291fe2a	65	depends on BLACKFIN
a5f6abd4 WB	66	help
	67	This is the SPI controller master driver for Blackfin 5xx processor.
	68
63bd2359 JN	69	config SPI_AU1550
63bd2359 JN	70	tristate "Au1550/Au12x0 SPI Controller"
6291fe2a	71	depends on (SOC_AU1550 \|\| SOC_AU1200) && EXPERIMENTAL
63bd2359 JN	72	select SPI_BITBANG
	73	help
	74	If you say yes to this option, support will be included for the
	75	Au1550 SPI controller (may also work with Au1200,Au1210,Au1250).
	76
	77	This driver can also be built as a module. If so, the module
	78	will be called au1550_spi.
	79
9904f22a	80	config SPI_BITBANG
d29389de	81	tristate "Utilities for Bitbanging SPI masters"
9904f22a DB	82	help
	83	With a few GPIO pins, your system can bitbang the SPI protocol.
	84	Select this to get SPI support through I/O pins (GPIO, parallel
	85	port, etc). Or, some systems' SPI master controller drivers use
	86	this code to manage the per-word or per-transfer accesses to the
	87	hardware shift registers.
	88
	89	This is library code, and is automatically selected by drivers that
	90	need it. You only need to select this explicitly to support driver
	91	modules that aren't part of this kernel tree.
8ae12a0d	92
7111763d DB	93	config SPI_BUTTERFLY
7111763d DB	94	tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)"
6291fe2a	95	depends on PARPORT
7111763d DB	96	select SPI_BITBANG
	97	help
	98	This uses a custom parallel port cable to connect to an AVR
	99	Butterfly <http://www.atmel.com/products/avr/butterfly>, an
	100	inexpensive battery powered microcontroller evaluation board.
	101	This same cable can be used to flash new firmware.
	102
34b8c661 SK	103	config SPI_COLDFIRE_QSPI
	104	tristate "Freescale Coldfire QSPI controller"
	105	depends on (M520x \|\| M523x \|\| M5249 \|\| M527x \|\| M528x \|\| M532x)
	106	help
	107	This enables support for the Coldfire QSPI controller in master
	108	mode.
	109
	110	This driver can also be built as a module. If so, the module
	111	will be called coldfire_qspi.
	112
358934a6 SP	113	config SPI_DAVINCI
	114	tristate "SPI controller driver for DaVinci/DA8xx SoC's"
	115	depends on SPI_MASTER && ARCH_DAVINCI
	116	select SPI_BITBANG
	117	help
	118	SPI master controller for DaVinci and DA8xx SPI modules.
	119
011f23a3 MW	120	config SPI_EP93XX
	121	tristate "Cirrus Logic EP93xx SPI controller"
	122	depends on ARCH_EP93XX
	123	help
	124	This enables using the Cirrus EP93xx SPI controller in master
	125	mode.
	126
	127	To compile this driver as a module, choose M here. The module will be
	128	called ep93xx_spi.
	129
d29389de DB	130	config SPI_GPIO
	131	tristate "GPIO-based bitbanging SPI Master"
	132	depends on GENERIC_GPIO
	133	select SPI_BITBANG
	134	help
	135	This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
	136	interface to manage MOSI, MISO, SCK, and chipselect signals. SPI
	137	slaves connected to a bus using this driver are configured as usual,
	138	except that the spi_board_info.controller_data holds the GPIO number
	139	for the chipselect used by this controller driver.
	140
	141	Note that this driver often won't achieve even 1 Mbit/sec speeds,
	142	making it unusually slow for SPI. If your platform can inline
	143	GPIO operations, you should be able to leverage that for better
	144	speed with a custom version of this driver; see the source code.
	145
b5f3294f SH	146	config SPI_IMX
	147	tristate "Freescale i.MX SPI controllers"
	148	depends on ARCH_MXC
	149	select SPI_BITBANG
	150	help
	151	This enables using the Freescale i.MX SPI controllers in master
	152	mode.
	153
78961a57 KB	154	config SPI_LM70_LLP
78961a57 KB	155	tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)"
6291fe2a	156	depends on PARPORT && EXPERIMENTAL
78961a57 KB	157	select SPI_BITBANG
	158	help
	159	This driver supports the NS LM70 LLP Evaluation Board,
	160	which interfaces to an LM70 temperature sensor using
	161	a parallel port.
	162
42bbb709 GL	163	config SPI_MPC52xx
	164	tristate "Freescale MPC52xx SPI (non-PSC) controller support"
	165	depends on PPC_MPC52xx && SPI
	166	select SPI_MASTER_OF
	167	help
	168	This drivers supports the MPC52xx SPI controller in master SPI
	169	mode.
	170
00b8fd23 DC	171	config SPI_MPC52xx_PSC
00b8fd23 DC	172	tristate "Freescale MPC52xx PSC SPI controller"
6291fe2a	173	depends on PPC_MPC52xx && EXPERIMENTAL
00b8fd23 DC	174	help
	175	This enables using the Freescale MPC52xx Programmable Serial
	176	Controller in master SPI mode.
	177
6e27388f AG	178	config SPI_MPC512x_PSC
	179	tristate "Freescale MPC512x PSC SPI controller"
	180	depends on SPI_MASTER && PPC_MPC512x
	181	help
	182	This enables using the Freescale MPC5121 Programmable Serial
	183	Controller in SPI master mode.
	184
b36ece83 MH	185	config SPI_FSL_LIB
	186	tristate
	187	depends on FSL_SOC
	188
3272029f MH	189	config SPI_FSL_SPI
3272029f MH	190	tristate "Freescale SPI controller"
9e04b333	191	depends on FSL_SOC
b36ece83	192	select SPI_FSL_LIB
ccf06998	193	help
3272029f MH	194	This enables using the Freescale SPI controllers in master mode.
	195	MPC83xx platform uses the controller in cpu mode or CPM/QE mode.
	196	MPC8569 uses the controller in QE mode, MPC8610 in cpu mode.
ccf06998	197
fdb3c18d DB	198	config SPI_OMAP_UWIRE
fdb3c18d DB	199	tristate "OMAP1 MicroWire"
6291fe2a	200	depends on ARCH_OMAP1
fdb3c18d DB	201	select SPI_BITBANG
	202	help
	203	This hooks up to the MicroWire controller on OMAP1 chips.
	204
ccdc7bf9	205	config SPI_OMAP24XX
8ebeb545 SR	206	tristate "McSPI driver for OMAP"
8ebeb545 SR	207	depends on ARCH_OMAP2PLUS
ccdc7bf9	208	help
8ebeb545	209	SPI master controller for OMAP24XX and later Multichannel SPI
ccdc7bf9	210	(McSPI) modules.
69c202af	211
35c9049b CM	212	config SPI_OMAP_100K
	213	tristate "OMAP SPI 100K"
	214	depends on SPI_MASTER && (ARCH_OMAP850 \|\| ARCH_OMAP730)
	215	help
	216	OMAP SPI 100K master controller for omap7xx boards.
	217
60cadec9 SA	218	config SPI_ORION
	219	tristate "Orion SPI master (EXPERIMENTAL)"
	220	depends on PLAT_ORION && EXPERIMENTAL
	221	help
	222	This enables using the SPI master controller on the Orion chips.
	223
b43d65f7 LW	224	config SPI_PL022
	225	tristate "ARM AMBA PL022 SSP controller (EXPERIMENTAL)"
	226	depends on ARM_AMBA && EXPERIMENTAL
	227	default y if MACH_U300
f33b29ee	228	default y if ARCH_REALVIEW
	229	default y if INTEGRATOR_IMPD1
	230	default y if ARCH_VERSATILE
b43d65f7 LW	231	help
	232	This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
	233	controller. If you have an embedded system with an AMBA(R)
	234	bus and a PL022 controller, say Y or M here.
	235
44dab88e SF	236	config SPI_PPC4xx
	237	tristate "PPC4xx SPI Controller"
	238	depends on PPC32 && 4xx && SPI_MASTER
	239	select SPI_BITBANG
	240	help
	241	This selects a driver for the PPC4xx SPI Controller.
	242
e0c9905e SS	243	config SPI_PXA2XX
e0c9905e SS	244	tristate "PXA2xx SSP SPI master"
6291fe2a	245	depends on ARCH_PXA && EXPERIMENTAL
2f1a74e5	246	select PXA_SSP
e0c9905e SS	247	help
	248	This enables using a PXA2xx SSP port as a SPI master controller.
	249	The driver can be configured to use any SSP port and additional
	250	documentation can be found a Documentation/spi/pxa2xx.
	251
85abfaa7 DB	252	config SPI_S3C24XX
85abfaa7 DB	253	tristate "Samsung S3C24XX series SPI"
6291fe2a	254	depends on ARCH_S3C2410 && EXPERIMENTAL
da0abc27	255	select SPI_BITBANG
85abfaa7 DB	256	help
	257	SPI driver for Samsung S3C24XX series ARM SoCs
	258
bec0806c BD	259	config SPI_S3C24XX_FIQ
	260	bool "S3C24XX driver with FIQ pseudo-DMA"
	261	depends on SPI_S3C24XX
	262	select FIQ
	263	help
	264	Enable FIQ support for the S3C24XX SPI driver to provide pseudo
	265	DMA by using the fast-interrupt request framework, This allows
	266	the driver to get DMA-like performance when there are either
	267	no free DMA channels, or when doing transfers that required both
	268	TX and RX data paths.
	269
1fc7547d BD	270	config SPI_S3C24XX_GPIO
1fc7547d BD	271	tristate "Samsung S3C24XX series SPI by GPIO"
6291fe2a	272	depends on ARCH_S3C2410 && EXPERIMENTAL
da0abc27	273	select SPI_BITBANG
1fc7547d BD	274	help
	275	SPI driver for Samsung S3C24XX series ARM SoCs using
	276	GPIO lines to provide the SPI bus. This can be used where
	277	the inbuilt hardware cannot provide the transfer mode, or
	278	where the board is using non hardware connected pins.
ae918c02	279
230d42d4 JB	280	config SPI_S3C64XX
	281	tristate "Samsung S3C64XX series type SPI"
	282	depends on ARCH_S3C64XX && EXPERIMENTAL
	283	select S3C64XX_DMA
	284	help
	285	SPI driver for Samsung S3C64XX and newer SoCs.
	286
8051effc MD	287	config SPI_SH_MSIOF
	288	tristate "SuperH MSIOF SPI controller"
	289	depends on SUPERH && HAVE_CLK
	290	select SPI_BITBANG
	291	help
	292	SPI driver for SuperH MSIOF blocks.
	293
37e46640 MD	294	config SPI_SH_SCI
37e46640 MD	295	tristate "SuperH SCI SPI controller"
6291fe2a	296	depends on SUPERH
37e46640 MD	297	select SPI_BITBANG
	298	help
	299	SPI driver for SuperH SCI blocks.
	300
0644c486	301	config SPI_STMP3XXX
	302	tristate "Freescale STMP37xx/378x SPI/SSP controller"
	303	depends on ARCH_STMP3XXX && SPI_MASTER
	304	help
	305	SPI driver for Freescale STMP37xx/378x SoC SSP interface
	306
e8b17b5b	307	config SPI_TOPCLIFF_PCH
cdbc8f04	308	tristate "Topcliff PCH SPI Controller"
e8b17b5b MO	309	depends on PCI
e8b17b5b MO	310	help
cdbc8f04 GL	311	SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus
cdbc8f04 GL	312	used in some x86 embedded processors.
e8b17b5b	313
f2cac67d AN	314	config SPI_TXX9
f2cac67d AN	315	tristate "Toshiba TXx9 SPI controller"
6291fe2a	316	depends on GENERIC_GPIO && CPU_TX49XX
f2cac67d AN	317	help
	318	SPI driver for Toshiba TXx9 MIPS SoCs
	319
ae918c02	320	config SPI_XILINX
c9da2e12	321	tristate "Xilinx SPI controller common module"
86fc5935	322	depends on HAS_IOMEM && EXPERIMENTAL
ae918c02	323	select SPI_BITBANG
d5af91a1	324	select SPI_XILINX_OF if (XILINX_VIRTEX \|\| MICROBLAZE)
ae918c02 AK	325	help
	326	This exposes the SPI controller IP from the Xilinx EDK.
	327
	328	See the "OPB Serial Peripheral Interface (SPI) (v1.00e)"
	329	Product Specification document (DS464) for hardware details.
	330
c9da2e12 RR	331	Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)"
c9da2e12 RR	332
d5af91a1 RR	333	config SPI_XILINX_OF
	334	tristate "Xilinx SPI controller OF device"
	335	depends on SPI_XILINX && (XILINX_VIRTEX \|\| MICROBLAZE)
	336	help
	337	This is the OF driver for the SPI controller IP from the Xilinx EDK.
	338
77166934 RR	339	config SPI_XILINX_PLTFM
	340	tristate "Xilinx SPI controller platform device"
	341	depends on SPI_XILINX
	342	help
	343	This is the platform driver for the SPI controller IP
	344	from the Xilinx EDK.
	345
30eaed05 WZ	346	config SPI_NUC900
	347	tristate "Nuvoton NUC900 series SPI"
	348	depends on ARCH_W90X900 && EXPERIMENTAL
	349	select SPI_BITBANG
	350	help
	351	SPI driver for Nuvoton NUC900 series ARM SoCs
	352
8ae12a0d DB	353	#
	354	# Add new SPI master controllers in alphabetical order above this line
	355	#
	356
e24c7452	357	config SPI_DESIGNWARE
8ca8d15a	358	tristate "DesignWare SPI controller core support"
e24c7452 FT	359	depends on SPI_MASTER
	360	help
	361	general driver for SPI controller core from DesignWare
	362
	363	config SPI_DW_PCI
	364	tristate "PCI interface driver for DW SPI core"
	365	depends on SPI_DESIGNWARE && PCI
	366
f7b6fd6d JHD	367	config SPI_DW_MMIO
f7b6fd6d JHD	368	tristate "Memory-mapped io interface driver for DW SPI core"
212b3c8b	369	depends on SPI_DESIGNWARE && HAVE_CLK
f7b6fd6d	370
8ae12a0d DB	371	#
	372	# There are lots of SPI device types, with sensors and memory
	373	# being probably the most widely used ones.
	374	#
	375	comment "SPI Protocol Masters"
8ae12a0d	376
814a8d50 AP	377	config SPI_SPIDEV
814a8d50 AP	378	tristate "User mode SPI device driver support"
6291fe2a	379	depends on EXPERIMENTAL
814a8d50 AP	380	help
	381	This supports user mode SPI protocol drivers.
	382
	383	Note that this application programming interface is EXPERIMENTAL
	384	and hence SUBJECT TO CHANGE WITHOUT NOTICE while it stabilizes.
	385
447aef1a BD	386	config SPI_TLE62X0
447aef1a BD	387	tristate "Infineon TLE62X0 (for power switching)"
6291fe2a	388	depends on SYSFS
447aef1a BD	389	help
	390	SPI driver for Infineon TLE62X0 series line driver chips,
	391	such as the TLE6220, TLE6230 and TLE6240. This provides a
	392	sysfs interface, with each line presented as a kind of GPIO
	393	exposing both switch control and diagnostic feedback.
	394
8ae12a0d DB	395	#
	396	# Add new SPI protocol masters in alphabetical order above this line
	397	#
	398
6291fe2a RD	399	endif # SPI_MASTER
6291fe2a RD	400
8ae12a0d DB	401	# (slave support would go here)
8ae12a0d DB	402
79d8c7a8	403	endif # SPI