Commit | Line | Data |
---|---|---|
00b3ed16 GKH |
1 | #include "hfa384x_usb.c" |
2 | #include "prism2mgmt.c" | |
3 | #include "prism2mib.c" | |
4 | #include "prism2sta.c" | |
76e3e7c4 | 5 | #include "prism2fw.c" |
00b3ed16 | 6 | |
297f06ce MT |
7 | #define PRISM_USB_DEVICE(vid, pid, name) \ |
8 | USB_DEVICE(vid, pid), \ | |
9 | .driver_info = (unsigned long) name | |
00b3ed16 GKH |
10 | |
11 | static struct usb_device_id usb_prism_tbl[] = { | |
12 | {PRISM_USB_DEVICE(0x04bb, 0x0922, "IOData AirPort WN-B11/USBS")}, | |
13 | {PRISM_USB_DEVICE(0x07aa, 0x0012, "Corega Wireless LAN USB Stick-11")}, | |
14 | {PRISM_USB_DEVICE(0x09aa, 0x3642, "Prism2.x 11Mbps WLAN USB Adapter")}, | |
f4ee0f42 MM |
15 | {PRISM_USB_DEVICE |
16 | (0x1668, 0x0408, "Actiontec Prism2.5 11Mbps WLAN USB Adapter")}, | |
17 | {PRISM_USB_DEVICE | |
18 | (0x1668, 0x0421, "Actiontec Prism2.5 11Mbps WLAN USB Adapter")}, | |
19 | {PRISM_USB_DEVICE | |
20 | (0x1915, 0x2236, "Linksys WUSB11v3.0 11Mbps WLAN USB Adapter")}, | |
21 | {PRISM_USB_DEVICE | |
22 | (0x066b, 0x2212, "Linksys WUSB11v2.5 11Mbps WLAN USB Adapter")}, | |
23 | {PRISM_USB_DEVICE | |
24 | (0x066b, 0x2213, "Linksys WUSB12v1.1 11Mbps WLAN USB Adapter")}, | |
25 | {PRISM_USB_DEVICE | |
26 | (0x067c, 0x1022, "Siemens SpeedStream 1022 11Mbps WLAN USB Adapter")}, | |
75f49e07 MT |
27 | {PRISM_USB_DEVICE(0x049f, 0x0033, |
28 | "Compaq/Intel W100 PRO/Wireless 11Mbps multiport WLAN Adapter")}, | |
f4ee0f42 MM |
29 | {PRISM_USB_DEVICE |
30 | (0x0411, 0x0016, "Melco WLI-USB-S11 11Mbps WLAN Adapter")}, | |
31 | {PRISM_USB_DEVICE | |
32 | (0x08de, 0x7a01, "PRISM25 IEEE 802.11 Mini USB Adapter")}, | |
33 | {PRISM_USB_DEVICE | |
34 | (0x8086, 0x1111, "Intel PRO/Wireless 2011B LAN USB Adapter")}, | |
35 | {PRISM_USB_DEVICE | |
36 | (0x0d8e, 0x7a01, "PRISM25 IEEE 802.11 Mini USB Adapter")}, | |
37 | {PRISM_USB_DEVICE | |
38 | (0x045e, 0x006e, "Microsoft MN510 Wireless USB Adapter")}, | |
00b3ed16 | 39 | {PRISM_USB_DEVICE(0x0967, 0x0204, "Acer Warplink USB Adapter")}, |
f4ee0f42 MM |
40 | {PRISM_USB_DEVICE |
41 | (0x0cde, 0x0002, "Z-Com 725/726 Prism2.5 USB/USB Integrated")}, | |
42 | {PRISM_USB_DEVICE | |
43 | (0x0cde, 0x0005, "Z-Com Xl735 Wireless 802.11b USB Adapter")}, | |
44 | {PRISM_USB_DEVICE | |
45 | (0x413c, 0x8100, "Dell TrueMobile 1180 Wireless USB Adapter")}, | |
46 | {PRISM_USB_DEVICE | |
47 | (0x0b3b, 0x1601, "ALLNET 0193 11Mbps WLAN USB Adapter")}, | |
48 | {PRISM_USB_DEVICE | |
49 | (0x0b3b, 0x1602, "ZyXEL ZyAIR B200 Wireless USB Adapter")}, | |
50 | {PRISM_USB_DEVICE | |
51 | (0x0baf, 0x00eb, "USRobotics USR1120 Wireless USB Adapter")}, | |
52 | {PRISM_USB_DEVICE | |
53 | (0x0411, 0x0027, "Melco WLI-USB-KS11G 11Mbps WLAN Adapter")}, | |
54 | {PRISM_USB_DEVICE | |
55 | (0x04f1, 0x3009, "JVC MP-XP7250 Builtin USB WLAN Adapter")}, | |
00b3ed16 | 56 | {PRISM_USB_DEVICE(0x0846, 0x4110, "NetGear MA111")}, |
f4ee0f42 MM |
57 | {PRISM_USB_DEVICE(0x03f3, 0x0020, "Adaptec AWN-8020 USB WLAN Adapter")}, |
58 | /* {PRISM_USB_DEVICE(0x0ace, 0x1201, "ZyDAS ZD1201 Wireless USB Adapter")}, */ | |
00b3ed16 GKH |
59 | {PRISM_USB_DEVICE(0x2821, 0x3300, "ASUS-WL140 Wireless USB Adapter")}, |
60 | {PRISM_USB_DEVICE(0x2001, 0x3700, "DWL-122 Wireless USB Adapter")}, | |
f4ee0f42 MM |
61 | {PRISM_USB_DEVICE |
62 | (0x2001, 0x3702, "DWL-120 Rev F Wireless USB Adapter")}, | |
00b3ed16 GKH |
63 | {PRISM_USB_DEVICE(0x50c2, 0x4013, "Averatec USB WLAN Adapter")}, |
64 | {PRISM_USB_DEVICE(0x2c02, 0x14ea, "Planex GW-US11H WLAN USB Adapter")}, | |
65 | {PRISM_USB_DEVICE(0x124a, 0x168b, "Airvast PRISM3 WLAN USB Adapter")}, | |
66 | {PRISM_USB_DEVICE(0x083a, 0x3503, "T-Sinus 111 USB WLAN Adapter")}, | |
67 | {PRISM_USB_DEVICE(0x2821, 0x3300, "Hawking HighDB USB Adapter")}, | |
f4ee0f42 MM |
68 | {PRISM_USB_DEVICE |
69 | (0x0411, 0x0044, "Melco WLI-USB-KB11 11Mbps WLAN Adapter")}, | |
00b3ed16 | 70 | {PRISM_USB_DEVICE(0x1668, 0x6106, "ROPEX FreeLan 802.11b USB Adapter")}, |
f4ee0f42 MM |
71 | {PRISM_USB_DEVICE |
72 | (0x124a, 0x4017, "Pheenet WL-503IA 802.11b USB Adapter")}, | |
00b3ed16 | 73 | {PRISM_USB_DEVICE(0x0bb2, 0x0302, "Ambit Microsystems Corp.")}, |
f4ee0f42 MM |
74 | {PRISM_USB_DEVICE |
75 | (0x9016, 0x182d, "Sitecom WL-022 802.11b USB Adapter")}, | |
76 | {PRISM_USB_DEVICE | |
77 | (0x0543, 0x0f01, "ViewSonic Airsync USB Adapter 11Mbps (Prism2.5)")}, | |
00b3ed16 GKH |
78 | { /* terminator */ } |
79 | }; | |
80 | ||
81 | MODULE_DEVICE_TABLE(usb, usb_prism_tbl); | |
82 | ||
83 | /*---------------------------------------------------------------- | |
84 | * prism2sta_probe_usb | |
85 | * | |
86 | * Probe routine called by the USB subsystem. | |
87 | * | |
88 | * Arguments: | |
89 | * dev ptr to the usb_device struct | |
90 | * ifnum interface number being offered | |
91 | * | |
92 | * Returns: | |
93 | * NULL - we're not claiming the device+interface | |
94 | * non-NULL - we are claiming the device+interface and | |
95 | * this is a ptr to the data we want back | |
96 | * when disconnect is called. | |
97 | * | |
98 | * Side effects: | |
99 | * | |
100 | * Call context: | |
101 | * I'm not sure, assume it's interrupt. | |
102 | * | |
103 | ----------------------------------------------------------------*/ | |
f4ee0f42 MM |
104 | static int prism2sta_probe_usb(struct usb_interface *interface, |
105 | const struct usb_device_id *id) | |
00b3ed16 | 106 | { |
00b3ed16 | 107 | struct usb_device *dev; |
00b3ed16 | 108 | |
f4ee0f42 MM |
109 | wlandevice_t *wlandev = NULL; |
110 | hfa384x_t *hw = NULL; | |
111 | int result = 0; | |
00b3ed16 | 112 | |
00b3ed16 | 113 | dev = interface_to_usbdev(interface); |
297f06ce MT |
114 | wlandev = create_wlan(); |
115 | if (wlandev == NULL) { | |
edbd606c | 116 | printk(KERN_ERR "%s: Memory allocation failure.\n", dev_info); |
00b3ed16 GKH |
117 | result = -EIO; |
118 | goto failed; | |
119 | } | |
120 | hw = wlandev->priv; | |
121 | ||
f4ee0f42 | 122 | if (wlan_setup(wlandev) != 0) { |
edbd606c | 123 | printk(KERN_ERR "%s: wlan_setup() failed.\n", dev_info); |
00b3ed16 GKH |
124 | result = -EIO; |
125 | goto failed; | |
126 | } | |
127 | ||
128 | /* Initialize the hw data */ | |
129 | hfa384x_create(hw, dev); | |
130 | hw->wlandev = wlandev; | |
131 | ||
132 | /* Register the wlandev, this gets us a name and registers the | |
133 | * linux netdevice. | |
134 | */ | |
00b3ed16 | 135 | SET_NETDEV_DEV(wlandev->netdev, &(interface->dev)); |
00b3ed16 GKH |
136 | |
137 | /* Do a chip-level reset on the MAC */ | |
138 | if (prism2_doreset) { | |
139 | result = hfa384x_corereset(hw, | |
f4ee0f42 MM |
140 | prism2_reset_holdtime, |
141 | prism2_reset_settletime, 0); | |
00b3ed16 GKH |
142 | if (result != 0) { |
143 | unregister_wlandev(wlandev); | |
144 | hfa384x_destroy(hw); | |
145 | result = -EIO; | |
edbd606c | 146 | printk(KERN_ERR |
f4ee0f42 | 147 | "%s: hfa384x_corereset() failed.\n", dev_info); |
00b3ed16 GKH |
148 | goto failed; |
149 | } | |
150 | } | |
151 | ||
00b3ed16 | 152 | usb_get_dev(dev); |
00b3ed16 GKH |
153 | |
154 | wlandev->msdstate = WLAN_MSD_HWPRESENT; | |
155 | ||
76e3e7c4 KR |
156 | /* Try and load firmware, then enable card before we register */ |
157 | prism2_fwtry(dev, wlandev); | |
158 | prism2sta_ifstate(wlandev, P80211ENUM_ifstate_enable); | |
159 | ||
f4ee0f42 | 160 | if (register_wlandev(wlandev) != 0) { |
edbd606c | 161 | printk(KERN_ERR "%s: register_wlandev() failed.\n", dev_info); |
1d1b6985 RK |
162 | result = -EIO; |
163 | goto failed; | |
f4ee0f42 | 164 | } |
1d1b6985 | 165 | |
00b3ed16 GKH |
166 | goto done; |
167 | ||
f4ee0f42 | 168 | failed: |
7c98f718 MM |
169 | kfree(wlandev); |
170 | kfree(hw); | |
00b3ed16 GKH |
171 | wlandev = NULL; |
172 | ||
f4ee0f42 | 173 | done: |
00b3ed16 GKH |
174 | usb_set_intfdata(interface, wlandev); |
175 | return result; | |
00b3ed16 GKH |
176 | } |
177 | ||
00b3ed16 GKH |
178 | /*---------------------------------------------------------------- |
179 | * prism2sta_disconnect_usb | |
180 | * | |
181 | * Called when a device previously claimed by probe is removed | |
182 | * from the USB. | |
183 | * | |
184 | * Arguments: | |
185 | * dev ptr to the usb_device struct | |
186 | * ptr ptr returned by probe() when the device | |
187 | * was claimed. | |
188 | * | |
189 | * Returns: | |
190 | * Nothing | |
191 | * | |
192 | * Side effects: | |
193 | * | |
194 | * Call context: | |
195 | * process | |
196 | ----------------------------------------------------------------*/ | |
f4ee0f42 | 197 | static void prism2sta_disconnect_usb(struct usb_interface *interface) |
00b3ed16 | 198 | { |
f4ee0f42 | 199 | wlandevice_t *wlandev; |
00b3ed16 | 200 | |
00b3ed16 | 201 | wlandev = (wlandevice_t *) usb_get_intfdata(interface); |
00b3ed16 | 202 | |
f4ee0f42 | 203 | if (wlandev != NULL) { |
00b3ed16 | 204 | LIST_HEAD(cleanlist); |
f4ee0f42 MM |
205 | struct list_head *entry; |
206 | struct list_head *temp; | |
207 | unsigned long flags; | |
00b3ed16 | 208 | |
f4ee0f42 | 209 | hfa384x_t *hw = wlandev->priv; |
00b3ed16 GKH |
210 | |
211 | if (!hw) | |
212 | goto exit; | |
213 | ||
214 | spin_lock_irqsave(&hw->ctlxq.lock, flags); | |
215 | ||
216 | p80211netdev_hwremoved(wlandev); | |
217 | list_splice_init(&hw->ctlxq.reapable, &cleanlist); | |
218 | list_splice_init(&hw->ctlxq.completing, &cleanlist); | |
219 | list_splice_init(&hw->ctlxq.pending, &cleanlist); | |
220 | list_splice_init(&hw->ctlxq.active, &cleanlist); | |
221 | ||
222 | spin_unlock_irqrestore(&hw->ctlxq.lock, flags); | |
223 | ||
224 | /* There's no hardware to shutdown, but the driver | |
225 | * might have some tasks or tasklets that must be | |
226 | * stopped before we can tear everything down. | |
227 | */ | |
228 | prism2sta_ifstate(wlandev, P80211ENUM_ifstate_disable); | |
229 | ||
230 | del_singleshot_timer_sync(&hw->throttle); | |
231 | del_singleshot_timer_sync(&hw->reqtimer); | |
232 | del_singleshot_timer_sync(&hw->resptimer); | |
233 | ||
234 | /* Unlink all the URBs. This "removes the wheels" | |
235 | * from the entire CTLX handling mechanism. | |
236 | */ | |
237 | usb_kill_urb(&hw->rx_urb); | |
238 | usb_kill_urb(&hw->tx_urb); | |
239 | usb_kill_urb(&hw->ctlx_urb); | |
240 | ||
241 | tasklet_kill(&hw->completion_bh); | |
242 | tasklet_kill(&hw->reaper_bh); | |
243 | ||
244 | flush_scheduled_work(); | |
245 | ||
246 | /* Now we complete any outstanding commands | |
247 | * and tell everyone who is waiting for their | |
248 | * responses that we have shut down. | |
249 | */ | |
250 | list_for_each(entry, &cleanlist) { | |
f4ee0f42 | 251 | hfa384x_usbctlx_t *ctlx; |
00b3ed16 GKH |
252 | |
253 | ctlx = list_entry(entry, hfa384x_usbctlx_t, list); | |
254 | complete(&ctlx->done); | |
255 | } | |
256 | ||
257 | /* Give any outstanding synchronous commands | |
258 | * a chance to complete. All they need to do | |
259 | * is "wake up", so that's easy. | |
260 | * (I'd like a better way to do this, really.) | |
261 | */ | |
262 | msleep(100); | |
263 | ||
264 | /* Now delete the CTLXs, because no-one else can now. */ | |
265 | list_for_each_safe(entry, temp, &cleanlist) { | |
266 | hfa384x_usbctlx_t *ctlx; | |
267 | ||
268 | ctlx = list_entry(entry, hfa384x_usbctlx_t, list); | |
269 | kfree(ctlx); | |
270 | } | |
271 | ||
272 | /* Unhook the wlandev */ | |
273 | unregister_wlandev(wlandev); | |
274 | wlan_unsetup(wlandev); | |
275 | ||
00b3ed16 | 276 | usb_put_dev(hw->usb); |
00b3ed16 GKH |
277 | |
278 | hfa384x_destroy(hw); | |
279 | kfree(hw); | |
280 | ||
281 | kfree(wlandev); | |
282 | } | |
283 | ||
f4ee0f42 | 284 | exit: |
00b3ed16 | 285 | usb_set_intfdata(interface, NULL); |
00b3ed16 GKH |
286 | } |
287 | ||
00b3ed16 | 288 | static struct usb_driver prism2_usb_driver = { |
00b3ed16 GKH |
289 | .name = "prism2_usb", |
290 | .probe = prism2sta_probe_usb, | |
291 | .disconnect = prism2sta_disconnect_usb, | |
292 | .id_table = usb_prism_tbl, | |
293 | /* fops, minor? */ | |
294 | }; | |
295 | ||
00b3ed16 GKH |
296 | static int __init prism2usb_init(void) |
297 | { | |
00b3ed16 GKH |
298 | /* This call will result in calls to prism2sta_probe_usb. */ |
299 | return usb_register(&prism2_usb_driver); | |
00b3ed16 GKH |
300 | }; |
301 | ||
302 | static void __exit prism2usb_cleanup(void) | |
303 | { | |
00b3ed16 | 304 | usb_deregister(&prism2_usb_driver); |
00b3ed16 GKH |
305 | }; |
306 | ||
307 | module_init(prism2usb_init); | |
308 | module_exit(prism2usb_cleanup); |