Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Serial device configuration | |
3 | # | |
1da177e4 LT |
4 | |
5 | menu "Serial drivers" | |
e25df120 | 6 | depends on HAS_IOMEM |
1da177e4 LT |
7 | |
8 | # | |
9 | # The new 8250/16550 serial drivers | |
10 | config SERIAL_8250 | |
11 | tristate "8250/16550 and compatible serial support" | |
1da177e4 LT |
12 | select SERIAL_CORE |
13 | ---help--- | |
14 | This selects whether you want to include the driver for the standard | |
15 | serial ports. The standard answer is Y. People who might say N | |
16 | here are those that are setting up dedicated Ethernet WWW/FTP | |
17 | servers, or users that have one of the various bus mice instead of a | |
18 | serial mouse and don't intend to use their machine's standard serial | |
19 | port for anything. (Note that the Cyclades and Stallion multi | |
20 | serial port drivers do not need this driver built in for them to | |
21 | work.) | |
22 | ||
23 | To compile this driver as a module, choose M here: the | |
df7559d3 | 24 | module will be called 8250. |
1da177e4 LT |
25 | [WARNING: Do not compile this driver as a module if you are using |
26 | non-standard serial ports, since the configuration information will | |
27 | be lost when the driver is unloaded. This limitation may be lifted | |
28 | in the future.] | |
29 | ||
30 | BTW1: If you have a mouseman serial mouse which is not recognized by | |
31 | the X window system, try running gpm first. | |
32 | ||
33 | BTW2: If you intend to use a software modem (also called Winmodem) | |
34 | under Linux, forget it. These modems are crippled and require | |
35 | proprietary drivers which are only available under Windows. | |
36 | ||
37 | Most people will say Y or M here, so that they can use serial mice, | |
38 | modems and similar devices connecting to the standard serial ports. | |
39 | ||
40 | config SERIAL_8250_CONSOLE | |
41 | bool "Console on 8250/16550 and compatible serial port" | |
42 | depends on SERIAL_8250=y | |
43 | select SERIAL_CORE_CONSOLE | |
44 | ---help--- | |
45 | If you say Y here, it will be possible to use a serial port as the | |
46 | system console (the system console is the device which receives all | |
47 | kernel messages and warnings and which allows logins in single user | |
48 | mode). This could be useful if some terminal or printer is connected | |
49 | to that serial port. | |
50 | ||
51 | Even if you say Y here, the currently visible virtual console | |
52 | (/dev/tty0) will still be used as the system console by default, but | |
53 | you can alter that using a kernel command line option such as | |
54 | "console=ttyS1". (Try "man bootparam" or see the documentation of | |
55 | your boot loader (grub or lilo or loadlin) about how to pass options | |
56 | to the kernel at boot time.) | |
57 | ||
58 | If you don't have a VGA card installed and you say Y here, the | |
59 | kernel will automatically use the first serial line, /dev/ttyS0, as | |
60 | system console. | |
61 | ||
01dd2fbf | 62 | You can set that using a kernel command line option such as |
18a8bd94 YL |
63 | "console=uart8250,io,0x3f8,9600n8" |
64 | "console=uart8250,mmio,0xff5e0000,115200n8". | |
01dd2fbf ML |
65 | and it will switch to normal serial console when the corresponding |
66 | port is ready. | |
18a8bd94 YL |
67 | "earlycon=uart8250,io,0x3f8,9600n8" |
68 | "earlycon=uart8250,mmio,0xff5e0000,115200n8". | |
69 | it will not only setup early console. | |
70 | ||
1da177e4 LT |
71 | If unsure, say N. |
72 | ||
18a8bd94 YL |
73 | config FIX_EARLYCON_MEM |
74 | bool | |
75 | depends on X86 | |
76 | default y | |
77 | ||
0cff260a RK |
78 | config SERIAL_8250_GSC |
79 | tristate | |
80 | depends on SERIAL_8250 && GSC | |
81 | default SERIAL_8250 | |
82 | ||
83 | config SERIAL_8250_PCI | |
6a108a14 | 84 | tristate "8250/16550 PCI device support" if EXPERT |
0cff260a RK |
85 | depends on SERIAL_8250 && PCI |
86 | default SERIAL_8250 | |
87 | help | |
57d4810e AM |
88 | This builds standard PCI serial support. You may be able to |
89 | disable this feature if you only need legacy serial support. | |
90 | Saves about 9K. | |
0cff260a RK |
91 | |
92 | config SERIAL_8250_PNP | |
6a108a14 | 93 | tristate "8250/16550 PNP device support" if EXPERT |
0cff260a RK |
94 | depends on SERIAL_8250 && PNP |
95 | default SERIAL_8250 | |
96 | help | |
57d4810e AM |
97 | This builds standard PNP serial support. You may be able to |
98 | disable this feature if you only need legacy serial support. | |
0cff260a RK |
99 | |
100 | config SERIAL_8250_HP300 | |
101 | tristate | |
102 | depends on SERIAL_8250 && HP300 | |
103 | default SERIAL_8250 | |
104 | ||
1da177e4 LT |
105 | config SERIAL_8250_CS |
106 | tristate "8250/16550 PCMCIA device support" | |
107 | depends on PCMCIA && SERIAL_8250 | |
108 | ---help--- | |
109 | Say Y here to enable support for 16-bit PCMCIA serial devices, | |
110 | including serial port cards, modems, and the modem functions of | |
111 | multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are | |
112 | credit-card size devices often used with laptops.) | |
113 | ||
114 | To compile this driver as a module, choose M here: the | |
115 | module will be called serial_cs. | |
116 | ||
117 | If unsure, say N. | |
118 | ||
1da177e4 | 119 | config SERIAL_8250_NR_UARTS |
026d02a2 | 120 | int "Maximum number of 8250/16550 serial ports" |
1da177e4 LT |
121 | depends on SERIAL_8250 |
122 | default "4" | |
ec9f47cd RK |
123 | help |
124 | Set this to the number of serial ports you want the driver | |
125 | to support. This includes any ports discovered via ACPI or | |
126 | PCI enumeration and any ports that may be added at run-time | |
127 | via hot-plug, or any ISA multi-port serial cards. | |
1da177e4 | 128 | |
a61c2d78 DJ |
129 | config SERIAL_8250_RUNTIME_UARTS |
130 | int "Number of 8250/16550 serial ports to register at runtime" | |
131 | depends on SERIAL_8250 | |
9a8ffccf | 132 | range 0 SERIAL_8250_NR_UARTS |
a61c2d78 DJ |
133 | default "4" |
134 | help | |
135 | Set this to the maximum number of serial ports you want | |
09509603 | 136 | the kernel to register at boot time. This can be overridden |
a61c2d78 DJ |
137 | with the module parameter "nr_uarts", or boot-time parameter |
138 | 8250.nr_uarts | |
139 | ||
1da177e4 LT |
140 | config SERIAL_8250_EXTENDED |
141 | bool "Extended 8250/16550 serial driver options" | |
142 | depends on SERIAL_8250 | |
143 | help | |
144 | If you wish to use any non-standard features of the standard "dumb" | |
145 | driver, say Y here. This includes HUB6 support, shared serial | |
146 | interrupts, special multiport support, support for more than the | |
147 | four COM 1/2/3/4 boards, etc. | |
148 | ||
149 | Note that the answer to this question won't directly affect the | |
150 | kernel: saying N will just cause the configurator to skip all | |
151 | the questions about serial driver options. If unsure, say N. | |
152 | ||
153 | config SERIAL_8250_MANY_PORTS | |
154 | bool "Support more than 4 legacy serial ports" | |
155 | depends on SERIAL_8250_EXTENDED && !IA64 | |
156 | help | |
157 | Say Y here if you have dumb serial boards other than the four | |
158 | standard COM 1/2/3/4 ports. This may happen if you have an AST | |
159 | FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available | |
160 | from <http://www.tldp.org/docs.html#howto>), or other custom | |
161 | serial port hardware which acts similar to standard serial port | |
162 | hardware. If you only use the standard COM 1/2/3/4 ports, you can | |
163 | say N here to save some memory. You can also say Y if you have an | |
164 | "intelligent" multiport card such as Cyclades, Digiboards, etc. | |
165 | ||
ec9f47cd RK |
166 | # |
167 | # Multi-port serial cards | |
168 | # | |
169 | ||
170 | config SERIAL_8250_FOURPORT | |
171 | tristate "Support Fourport cards" | |
172 | depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS | |
173 | help | |
174 | Say Y here if you have an AST FourPort serial board. | |
175 | ||
176 | To compile this driver as a module, choose M here: the module | |
177 | will be called 8250_fourport. | |
178 | ||
179 | config SERIAL_8250_ACCENT | |
180 | tristate "Support Accent cards" | |
181 | depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS | |
182 | help | |
183 | Say Y here if you have an Accent Async serial board. | |
184 | ||
185 | To compile this driver as a module, choose M here: the module | |
186 | will be called 8250_accent. | |
187 | ||
ec9f47cd RK |
188 | config SERIAL_8250_BOCA |
189 | tristate "Support Boca cards" | |
190 | depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS | |
191 | help | |
192 | Say Y here if you have a Boca serial board. Please read the Boca | |
09509603 | 193 | mini-HOWTO, available from <http://www.tldp.org/docs.html#howto> |
ec9f47cd RK |
194 | |
195 | To compile this driver as a module, choose M here: the module | |
196 | will be called 8250_boca. | |
197 | ||
e0980daf PS |
198 | config SERIAL_8250_EXAR_ST16C554 |
199 | tristate "Support Exar ST16C554/554D Quad UART" | |
200 | depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS | |
201 | help | |
202 | The Uplogix Envoy TU301 uses this Exar Quad UART. If you are | |
203 | tinkering with your Envoy TU301, or have a machine with this UART, | |
204 | say Y here. | |
205 | ||
206 | To compile this driver as a module, choose M here: the module | |
207 | will be called 8250_exar_st16c554. | |
208 | ||
ec9f47cd RK |
209 | config SERIAL_8250_HUB6 |
210 | tristate "Support Hub6 cards" | |
211 | depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS | |
212 | help | |
213 | Say Y here if you have a HUB6 serial board. | |
214 | ||
215 | To compile this driver as a module, choose M here: the module | |
216 | will be called 8250_hub6. | |
217 | ||
bf4735a4 DM |
218 | config SERIAL_8250_SHARE_IRQ |
219 | bool "Support for sharing serial interrupts" | |
220 | depends on SERIAL_8250_EXTENDED | |
221 | help | |
222 | Some serial boards have hardware support which allows multiple dumb | |
223 | serial ports on the same board to share a single IRQ. To enable | |
224 | support for this in the serial driver, say Y here. | |
225 | ||
226 | config SERIAL_8250_DETECT_IRQ | |
227 | bool "Autodetect IRQ on standard ports (unsafe)" | |
228 | depends on SERIAL_8250_EXTENDED | |
229 | help | |
230 | Say Y here if you want the kernel to try to guess which IRQ | |
231 | to use for your serial port. | |
232 | ||
233 | This is considered unsafe; it is far better to configure the IRQ in | |
234 | a boot script using the setserial command. | |
235 | ||
236 | If unsure, say N. | |
237 | ||
238 | config SERIAL_8250_RSA | |
239 | bool "Support RSA serial ports" | |
240 | depends on SERIAL_8250_EXTENDED | |
241 | help | |
242 | ::: To be written ::: | |
243 | ||
ec9f47cd RK |
244 | config SERIAL_8250_MCA |
245 | tristate "Support 8250-type ports on MCA buses" | |
246 | depends on SERIAL_8250 != n && MCA | |
247 | help | |
248 | Say Y here if you have a MCA serial ports. | |
249 | ||
250 | To compile this driver as a module, choose M here: the module | |
251 | will be called 8250_mca. | |
1da177e4 LT |
252 | |
253 | config SERIAL_8250_ACORN | |
254 | tristate "Acorn expansion card serial port support" | |
ec9f47cd | 255 | depends on ARCH_ACORN && SERIAL_8250 |
1da177e4 LT |
256 | help |
257 | If you have an Atomwide Serial card or Serial Port card for an Acorn | |
258 | system, say Y to this option. The driver can handle 1, 2, or 3 port | |
259 | cards. If unsure, say N. | |
260 | ||
bd71c182 TK |
261 | config SERIAL_8250_RM9K |
262 | bool "Support for MIPS RM9xxx integrated serial port" | |
263 | depends on SERIAL_8250 != n && SERIAL_RM9000 | |
264 | select SERIAL_8250_SHARE_IRQ | |
265 | help | |
266 | Selecting this option will add support for the integrated serial | |
267 | port hardware found on MIPS RM9122 and similar processors. | |
268 | If unsure, say N. | |
269 | ||
ec9f47cd RK |
270 | comment "Non-8250 serial port support" |
271 | ||
1da177e4 LT |
272 | config SERIAL_AMBA_PL010 |
273 | tristate "ARM AMBA PL010 serial port support" | |
84b6a232 | 274 | depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) |
1da177e4 LT |
275 | select SERIAL_CORE |
276 | help | |
277 | This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have | |
00584719 LB |
278 | an Integrator/AP or Integrator/PP2 platform, or if you have a |
279 | Cirrus Logic EP93xx CPU, say Y or M here. | |
1da177e4 LT |
280 | |
281 | If unsure, say N. | |
282 | ||
283 | config SERIAL_AMBA_PL010_CONSOLE | |
284 | bool "Support for console on AMBA serial port" | |
285 | depends on SERIAL_AMBA_PL010=y | |
286 | select SERIAL_CORE_CONSOLE | |
287 | ---help--- | |
288 | Say Y here if you wish to use an AMBA PrimeCell UART as the system | |
289 | console (the system console is the device which receives all kernel | |
290 | messages and warnings and which allows logins in single user mode). | |
291 | ||
292 | Even if you say Y here, the currently visible framebuffer console | |
293 | (/dev/tty0) will still be used as the system console by default, but | |
294 | you can alter that using a kernel command line option such as | |
295 | "console=ttyAM0". (Try "man bootparam" or see the documentation of | |
296 | your boot loader (lilo or loadlin) about how to pass options to the | |
297 | kernel at boot time.) | |
298 | ||
299 | config SERIAL_AMBA_PL011 | |
300 | tristate "ARM AMBA PL011 serial port support" | |
301 | depends on ARM_AMBA | |
302 | select SERIAL_CORE | |
303 | help | |
304 | This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have | |
305 | an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M | |
306 | here. | |
307 | ||
308 | If unsure, say N. | |
309 | ||
310 | config SERIAL_AMBA_PL011_CONSOLE | |
311 | bool "Support for console on AMBA serial port" | |
312 | depends on SERIAL_AMBA_PL011=y | |
313 | select SERIAL_CORE_CONSOLE | |
314 | ---help--- | |
315 | Say Y here if you wish to use an AMBA PrimeCell UART as the system | |
316 | console (the system console is the device which receives all kernel | |
317 | messages and warnings and which allows logins in single user mode). | |
318 | ||
319 | Even if you say Y here, the currently visible framebuffer console | |
320 | (/dev/tty0) will still be used as the system console by default, but | |
321 | you can alter that using a kernel command line option such as | |
b22b4cdd | 322 | "console=ttyAMA0". (Try "man bootparam" or see the documentation of |
1da177e4 LT |
323 | your boot loader (lilo or loadlin) about how to pass options to the |
324 | kernel at boot time.) | |
325 | ||
b45d5279 MR |
326 | config SERIAL_SB1250_DUART |
327 | tristate "BCM1xxx on-chip DUART serial support" | |
328 | depends on SIBYTE_SB1xxx_SOC=y | |
329 | select SERIAL_CORE | |
330 | default y | |
331 | ---help--- | |
332 | Support for the asynchronous serial interface (DUART) included in | |
333 | the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that | |
334 | the letter D in DUART stands for "dual", which is how the device | |
335 | is implemented. Depending on the SOC configuration there may be | |
336 | one or more DUARTs available of which all are handled. | |
337 | ||
338 | If unsure, say Y. To compile this driver as a module, choose M here: | |
339 | the module will be called sb1250-duart. | |
340 | ||
341 | config SERIAL_SB1250_DUART_CONSOLE | |
342 | bool "Support for console on a BCM1xxx DUART serial port" | |
343 | depends on SERIAL_SB1250_DUART=y | |
344 | select SERIAL_CORE_CONSOLE | |
345 | default y | |
346 | ---help--- | |
347 | If you say Y here, it will be possible to use a serial port as the | |
348 | system console (the system console is the device which receives all | |
349 | kernel messages and warnings and which allows logins in single user | |
350 | mode). | |
351 | ||
352 | If unsure, say Y. | |
353 | ||
749c4e60 HS |
354 | config SERIAL_ATMEL |
355 | bool "AT91 / AT32 on-chip serial port support" | |
acca9b83 | 356 | depends on (ARM && ARCH_AT91) || AVR32 |
1e6c9c28 AV |
357 | select SERIAL_CORE |
358 | help | |
afefc415 | 359 | This enables the driver for the on-chip UARTs of the Atmel |
acca9b83 | 360 | AT91 and AT32 processors. |
1e6c9c28 | 361 | |
749c4e60 HS |
362 | config SERIAL_ATMEL_CONSOLE |
363 | bool "Support for console on AT91 / AT32 serial port" | |
364 | depends on SERIAL_ATMEL=y | |
1e6c9c28 AV |
365 | select SERIAL_CORE_CONSOLE |
366 | help | |
acca9b83 HS |
367 | Say Y here if you wish to use an on-chip UART on a Atmel |
368 | AT91 or AT32 processor as the system console (the system | |
369 | console is the device which receives all kernel messages and | |
370 | warnings and which allows logins in single user mode). | |
1e6c9c28 | 371 | |
a6670615 CC |
372 | config SERIAL_ATMEL_PDC |
373 | bool "Support DMA transfers on AT91 / AT32 serial port" | |
374 | depends on SERIAL_ATMEL | |
375 | default y | |
376 | help | |
377 | Say Y here if you wish to use the PDC to do DMA transfers to | |
378 | and from the Atmel AT91 / AT32 serial port. In order to | |
379 | actually use DMA transfers, make sure that the use_dma_tx | |
380 | and use_dma_rx members in the atmel_uart_data struct is set | |
381 | appropriately for each port. | |
382 | ||
383 | Note that break and error handling currently doesn't work | |
384 | properly when DMA is enabled. Make sure that ports where | |
385 | this matters don't use DMA. | |
386 | ||
749c4e60 | 387 | config SERIAL_ATMEL_TTYAT |
acca9b83 | 388 | bool "Install as device ttyATn instead of ttySn" |
749c4e60 | 389 | depends on SERIAL_ATMEL=y |
1e6c9c28 | 390 | help |
acca9b83 HS |
391 | Say Y here if you wish to have the internal AT91 / AT32 UARTs |
392 | appear as /dev/ttyATn (major 204, minor starting at 154) | |
393 | instead of the normal /dev/ttySn (major 4, minor starting at | |
394 | 64). This is necessary if you also want other UARTs, such as | |
395 | external 8250/16C550 compatible UARTs. | |
1e6c9c28 AV |
396 | The ttySn nodes are legally reserved for the 8250 serial driver |
397 | but are often misused by other serial drivers. | |
398 | ||
399 | To use this, you should create suitable ttyATn device nodes in | |
400 | /dev/, and pass "console=ttyATn" to the kernel. | |
401 | ||
402 | Say Y if you have an external 8250/16C550 UART. If unsure, say N. | |
403 | ||
2c7ee6ab AV |
404 | config SERIAL_KS8695 |
405 | bool "Micrel KS8695 (Centaur) serial port support" | |
406 | depends on ARCH_KS8695 | |
407 | select SERIAL_CORE | |
408 | help | |
409 | This selects the Micrel Centaur KS8695 UART. Say Y here. | |
410 | ||
411 | config SERIAL_KS8695_CONSOLE | |
412 | bool "Support for console on KS8695 (Centaur) serial port" | |
413 | depends on SERIAL_KS8695=y | |
414 | select SERIAL_CORE_CONSOLE | |
415 | help | |
416 | Say Y here if you wish to use a KS8695 (Centaur) UART as the | |
417 | system console (the system console is the device which | |
418 | receives all kernel messages and warnings and which allows | |
419 | logins in single user mode). | |
420 | ||
1da177e4 LT |
421 | config SERIAL_CLPS711X |
422 | tristate "CLPS711X serial port support" | |
423 | depends on ARM && ARCH_CLPS711X | |
424 | select SERIAL_CORE | |
425 | help | |
426 | ::: To be written ::: | |
427 | ||
428 | config SERIAL_CLPS711X_CONSOLE | |
429 | bool "Support for console on CLPS711X serial port" | |
430 | depends on SERIAL_CLPS711X=y | |
431 | select SERIAL_CORE_CONSOLE | |
432 | help | |
433 | Even if you say Y here, the currently visible virtual console | |
434 | (/dev/tty0) will still be used as the system console by default, but | |
435 | you can alter that using a kernel command line option such as | |
436 | "console=ttyCL1". (Try "man bootparam" or see the documentation of | |
437 | your boot loader (lilo or loadlin) about how to pass options to the | |
438 | kernel at boot time.) | |
439 | ||
b497549a BD |
440 | config SERIAL_SAMSUNG |
441 | tristate "Samsung SoC serial support" | |
1de203ad | 442 | depends on ARM && PLAT_SAMSUNG |
19c1d6a3 | 443 | select SERIAL_CORE |
1da177e4 | 444 | help |
73e55cb3 | 445 | Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, |
1da177e4 LT |
446 | providing /dev/ttySAC0, 1 and 2 (note, some machines may not |
447 | provide all of these ports, depending on how the serial port | |
448 | pins are configured. | |
449 | ||
3bd9377e BD |
450 | config SERIAL_SAMSUNG_UARTS_4 |
451 | bool | |
452 | depends on ARM && PLAT_SAMSUNG | |
453 | default y if CPU_S3C2443 | |
454 | help | |
455 | Internal node for the common case of 4 Samsung compatible UARTs | |
456 | ||
03d5e77b BD |
457 | config SERIAL_SAMSUNG_UARTS |
458 | int | |
1de203ad | 459 | depends on ARM && PLAT_SAMSUNG |
03d5e77b | 460 | default 2 if ARCH_S3C2400 |
2555e663 | 461 | default 6 if ARCH_S5P6450 |
3bd9377e | 462 | default 4 if SERIAL_SAMSUNG_UARTS_4 |
03d5e77b BD |
463 | default 3 |
464 | help | |
465 | Select the number of available UART ports for the Samsung S3C | |
466 | serial driver | |
467 | ||
b497549a BD |
468 | config SERIAL_SAMSUNG_DEBUG |
469 | bool "Samsung SoC serial debug" | |
5fed4a37 | 470 | depends on SERIAL_SAMSUNG && DEBUG_LL |
b497549a BD |
471 | help |
472 | Add support for debugging the serial driver. Since this is | |
473 | generally being used as a console, we use our own output | |
474 | routines that go via the low-level debug printascii() | |
475 | function. | |
476 | ||
477 | config SERIAL_SAMSUNG_CONSOLE | |
478 | bool "Support for console on Samsung SoC serial port" | |
479 | depends on SERIAL_SAMSUNG=y | |
1da177e4 LT |
480 | select SERIAL_CORE_CONSOLE |
481 | help | |
73e55cb3 | 482 | Allow selection of the S3C24XX on-board serial ports for use as |
1da177e4 LT |
483 | an virtual console. |
484 | ||
485 | Even if you say Y here, the currently visible virtual console | |
486 | (/dev/tty0) will still be used as the system console by default, but | |
487 | you can alter that using a kernel command line option such as | |
488 | "console=ttySACx". (Try "man bootparam" or see the documentation of | |
489 | your boot loader about how to pass options to the kernel at | |
490 | boot time.) | |
491 | ||
b497549a BD |
492 | config SERIAL_S3C2400 |
493 | tristate "Samsung S3C2410 Serial port support" | |
494 | depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400 | |
495 | default y if CPU_S3C2400 | |
496 | help | |
497 | Serial port support for the Samsung S3C2400 SoC | |
498 | ||
499 | config SERIAL_S3C2410 | |
500 | tristate "Samsung S3C2410 Serial port support" | |
501 | depends on SERIAL_SAMSUNG && CPU_S3C2410 | |
502 | default y if CPU_S3C2410 | |
503 | help | |
504 | Serial port support for the Samsung S3C2410 SoC | |
505 | ||
506 | config SERIAL_S3C2412 | |
507 | tristate "Samsung S3C2412/S3C2413 Serial port support" | |
508 | depends on SERIAL_SAMSUNG && CPU_S3C2412 | |
509 | default y if CPU_S3C2412 | |
510 | help | |
511 | Serial port support for the Samsung S3C2412 and S3C2413 SoC | |
512 | ||
513 | config SERIAL_S3C2440 | |
4fcfce9f YK |
514 | tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support" |
515 | depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416) | |
b497549a BD |
516 | default y if CPU_S3C2440 |
517 | default y if CPU_S3C2442 | |
4fcfce9f | 518 | select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416 |
b497549a | 519 | help |
4fcfce9f | 520 | Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC |
b497549a | 521 | |
1d4bab08 SP |
522 | config SERIAL_S3C24A0 |
523 | tristate "Samsung S3C24A0 Serial port support" | |
524 | depends on SERIAL_SAMSUNG && CPU_S3C24A0 | |
525 | default y if CPU_S3C24A0 | |
526 | help | |
527 | Serial port support for the Samsung S3C24A0 SoC | |
b497549a | 528 | |
b690ace5 | 529 | config SERIAL_S3C6400 |
2555e663 KK |
530 | tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" |
531 | depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) | |
3bd9377e | 532 | select SERIAL_SAMSUNG_UARTS_4 |
b690ace5 BD |
533 | default y |
534 | help | |
2555e663 | 535 | Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 |
cb34a674 | 536 | and S5PC100 SoCs |
433a915f | 537 | |
d8512731 TA |
538 | config SERIAL_S5PV210 |
539 | tristate "Samsung S5PV210 Serial port support" | |
e0f263d7 | 540 | depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_EXYNOS4210) |
9c0ff728 | 541 | select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_EXYNOS4210) |
d8512731 TA |
542 | default y |
543 | help | |
544 | Serial port support for Samsung's S5P Family of SoC's | |
545 | ||
61fd1526 AC |
546 | |
547 | config SERIAL_MAX3100 | |
548 | tristate "MAX3100 support" | |
549 | depends on SPI | |
550 | select SERIAL_CORE | |
551 | help | |
552 | MAX3100 chip support | |
553 | ||
44318feb | 554 | config SERIAL_MAX3107 |
555 | tristate "MAX3107 support" | |
61fd1526 | 556 | depends on SPI |
44318feb | 557 | select SERIAL_CORE |
44318feb | 558 | help |
559 | MAX3107 chip support | |
560 | ||
61fd1526 AC |
561 | config SERIAL_MAX3107_AAVA |
562 | tristate "MAX3107 AAVA platform support" | |
563 | depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB | |
1dcb884c CP |
564 | select SERIAL_CORE |
565 | help | |
61fd1526 AC |
566 | Support for the MAX3107 chip configuration found on the AAVA |
567 | platform. Includes the extra initialisation and GPIO support | |
568 | neded for this device. | |
1dcb884c | 569 | |
1da177e4 LT |
570 | config SERIAL_DZ |
571 | bool "DECstation DZ serial driver" | |
875d43e7 | 572 | depends on MACH_DECSTATION && 32BIT |
1da177e4 | 573 | select SERIAL_CORE |
7287d765 MR |
574 | default y |
575 | ---help--- | |
576 | DZ11-family serial controllers for DECstations and VAXstations, | |
577 | including the DC7085, M7814, and M7819. | |
1da177e4 LT |
578 | |
579 | config SERIAL_DZ_CONSOLE | |
580 | bool "Support console on DECstation DZ serial driver" | |
581 | depends on SERIAL_DZ=y | |
582 | select SERIAL_CORE_CONSOLE | |
7287d765 MR |
583 | default y |
584 | ---help--- | |
1da177e4 LT |
585 | If you say Y here, it will be possible to use a serial port as the |
586 | system console (the system console is the device which receives all | |
587 | kernel messages and warnings and which allows logins in single user | |
7287d765 MR |
588 | mode). |
589 | ||
590 | Note that the firmware uses ttyS3 as the serial console on | |
591 | DECstations that use this driver. | |
1da177e4 LT |
592 | |
593 | If unsure, say Y. | |
594 | ||
8b4a4080 MR |
595 | config SERIAL_ZS |
596 | tristate "DECstation Z85C30 serial support" | |
597 | depends on MACH_DECSTATION | |
598 | select SERIAL_CORE | |
599 | default y | |
600 | ---help--- | |
601 | Support for the Zilog 85C350 serial communications controller used | |
602 | for serial ports in newer DECstation systems. These include the | |
603 | DECsystem 5900 and all models of the DECstation and DECsystem 5000 | |
604 | systems except from model 200. | |
605 | ||
606 | If unsure, say Y. To compile this driver as a module, choose M here: | |
607 | the module will be called zs. | |
608 | ||
609 | config SERIAL_ZS_CONSOLE | |
610 | bool "Support for console on a DECstation Z85C30 serial port" | |
611 | depends on SERIAL_ZS=y | |
612 | select SERIAL_CORE_CONSOLE | |
613 | default y | |
614 | ---help--- | |
615 | If you say Y here, it will be possible to use a serial port as the | |
616 | system console (the system console is the device which receives all | |
617 | kernel messages and warnings and which allows logins in single user | |
618 | mode). | |
619 | ||
620 | Note that the firmware uses ttyS1 as the serial console on the | |
621 | Maxine and ttyS3 on the others using this driver. | |
622 | ||
623 | If unsure, say Y. | |
624 | ||
1da177e4 LT |
625 | config SERIAL_21285 |
626 | tristate "DC21285 serial port support" | |
627 | depends on ARM && FOOTBRIDGE | |
628 | select SERIAL_CORE | |
629 | help | |
630 | If you have a machine based on a 21285 (Footbridge) StrongARM(R)/ | |
631 | PCI bridge you can enable its onboard serial port by enabling this | |
632 | option. | |
633 | ||
634 | config SERIAL_21285_CONSOLE | |
635 | bool "Console on DC21285 serial port" | |
636 | depends on SERIAL_21285=y | |
637 | select SERIAL_CORE_CONSOLE | |
638 | help | |
639 | If you have enabled the serial port on the 21285 footbridge you can | |
640 | make it the console by answering Y to this option. | |
641 | ||
642 | Even if you say Y here, the currently visible virtual console | |
643 | (/dev/tty0) will still be used as the system console by default, but | |
644 | you can alter that using a kernel command line option such as | |
645 | "console=ttyFB". (Try "man bootparam" or see the documentation of | |
646 | your boot loader (lilo or loadlin) about how to pass options to the | |
647 | kernel at boot time.) | |
648 | ||
1da177e4 LT |
649 | config SERIAL_MPSC |
650 | bool "Marvell MPSC serial port support" | |
651 | depends on PPC32 && MV64X60 | |
652 | select SERIAL_CORE | |
653 | help | |
654 | Say Y here if you want to use the Marvell MPSC serial controller. | |
655 | ||
656 | config SERIAL_MPSC_CONSOLE | |
657 | bool "Support for console on Marvell MPSC serial port" | |
658 | depends on SERIAL_MPSC | |
659 | select SERIAL_CORE_CONSOLE | |
660 | help | |
661 | Say Y here if you want to support a serial console on a Marvell MPSC. | |
662 | ||
663 | config SERIAL_PXA | |
664 | bool "PXA serial port support" | |
56422554 | 665 | depends on ARCH_PXA || ARCH_MMP |
1da177e4 LT |
666 | select SERIAL_CORE |
667 | help | |
668 | If you have a machine based on an Intel XScale PXA2xx CPU you | |
669 | can enable its onboard serial ports by enabling this option. | |
670 | ||
671 | config SERIAL_PXA_CONSOLE | |
672 | bool "Console on PXA serial port" | |
673 | depends on SERIAL_PXA | |
674 | select SERIAL_CORE_CONSOLE | |
675 | help | |
676 | If you have enabled the serial port on the Intel XScale PXA | |
677 | CPU you can make it the console by answering Y to this option. | |
678 | ||
679 | Even if you say Y here, the currently visible virtual console | |
680 | (/dev/tty0) will still be used as the system console by default, but | |
681 | you can alter that using a kernel command line option such as | |
682 | "console=ttySA0". (Try "man bootparam" or see the documentation of | |
683 | your boot loader (lilo or loadlin) about how to pass options to the | |
684 | kernel at boot time.) | |
685 | ||
686 | config SERIAL_SA1100 | |
687 | bool "SA1100 serial port support" | |
688 | depends on ARM && ARCH_SA1100 | |
689 | select SERIAL_CORE | |
690 | help | |
691 | If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you | |
692 | can enable its onboard serial port by enabling this option. | |
693 | Please read <file:Documentation/arm/SA1100/serial_UART> for further | |
694 | info. | |
695 | ||
696 | config SERIAL_SA1100_CONSOLE | |
697 | bool "Console on SA1100 serial port" | |
698 | depends on SERIAL_SA1100 | |
699 | select SERIAL_CORE_CONSOLE | |
700 | help | |
701 | If you have enabled the serial port on the SA1100/SA1110 StrongARM | |
702 | CPU you can make it the console by answering Y to this option. | |
703 | ||
704 | Even if you say Y here, the currently visible virtual console | |
705 | (/dev/tty0) will still be used as the system console by default, but | |
706 | you can alter that using a kernel command line option such as | |
707 | "console=ttySA0". (Try "man bootparam" or see the documentation of | |
708 | your boot loader (lilo or loadlin) about how to pass options to the | |
709 | kernel at boot time.) | |
710 | ||
22510995 FT |
711 | config SERIAL_MRST_MAX3110 |
712 | tristate "SPI UART driver for Max3110" | |
713 | depends on SPI_DW_PCI | |
714 | select SERIAL_CORE | |
715 | select SERIAL_CORE_CONSOLE | |
716 | help | |
717 | This is the UART protocol driver for the MAX3110 device on | |
718 | the Intel Moorestown platform. On other systems use the max3100 | |
719 | driver. | |
720 | ||
d843fc6e FT |
721 | config SERIAL_MFD_HSU |
722 | tristate "Medfield High Speed UART support" | |
723 | depends on PCI | |
724 | select SERIAL_CORE | |
725 | ||
726 | config SERIAL_MFD_HSU_CONSOLE | |
727 | boolean "Medfile HSU serial console support" | |
728 | depends on SERIAL_MFD_HSU=y | |
729 | select SERIAL_CORE_CONSOLE | |
730 | ||
194de561 BW |
731 | config SERIAL_BFIN |
732 | tristate "Blackfin serial port support" | |
529a73fb | 733 | depends on BLACKFIN |
194de561 BW |
734 | select SERIAL_CORE |
735 | select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561) | |
736 | help | |
737 | Add support for the built-in UARTs on the Blackfin. | |
738 | ||
739 | To compile this driver as a module, choose M here: the | |
740 | module will be called bfin_5xx. | |
741 | ||
742 | config SERIAL_BFIN_CONSOLE | |
743 | bool "Console on Blackfin serial port" | |
7111de76 | 744 | depends on SERIAL_BFIN=y |
194de561 BW |
745 | select SERIAL_CORE_CONSOLE |
746 | ||
747 | choice | |
748 | prompt "UART Mode" | |
749 | depends on SERIAL_BFIN | |
750 | default SERIAL_BFIN_DMA | |
751 | help | |
752 | This driver supports the built-in serial ports of the Blackfin family | |
753 | of CPUs | |
754 | ||
755 | config SERIAL_BFIN_DMA | |
756 | bool "DMA mode" | |
51a2301e | 757 | depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n |
194de561 BW |
758 | help |
759 | This driver works under DMA mode. If this option is selected, the | |
760 | blackfin simple dma driver is also enabled. | |
761 | ||
762 | config SERIAL_BFIN_PIO | |
763 | bool "PIO mode" | |
764 | help | |
765 | This driver works under PIO mode. | |
766 | ||
767 | endchoice | |
768 | ||
769 | config SERIAL_BFIN_UART0 | |
770 | bool "Enable UART0" | |
771 | depends on SERIAL_BFIN | |
772 | help | |
773 | Enable UART0 | |
774 | ||
775 | config BFIN_UART0_CTSRTS | |
776 | bool "Enable UART0 hardware flow control" | |
777 | depends on SERIAL_BFIN_UART0 | |
778 | help | |
57afb399 | 779 | Enable hardware flow control in the driver. |
194de561 BW |
780 | |
781 | config SERIAL_BFIN_UART1 | |
782 | bool "Enable UART1" | |
09545568 | 783 | depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561) |
194de561 BW |
784 | help |
785 | Enable UART1 | |
786 | ||
787 | config BFIN_UART1_CTSRTS | |
788 | bool "Enable UART1 hardware flow control" | |
789 | depends on SERIAL_BFIN_UART1 | |
790 | help | |
57afb399 | 791 | Enable hardware flow control in the driver. |
194de561 | 792 | |
f4d640c9 RH |
793 | config SERIAL_BFIN_UART2 |
794 | bool "Enable UART2" | |
f933d3c7 | 795 | depends on SERIAL_BFIN && (BF54x || BF538 || BF539) |
f4d640c9 RH |
796 | help |
797 | Enable UART2 | |
798 | ||
799 | config BFIN_UART2_CTSRTS | |
800 | bool "Enable UART2 hardware flow control" | |
801 | depends on SERIAL_BFIN_UART2 | |
802 | help | |
57afb399 | 803 | Enable hardware flow control in the driver. |
f4d640c9 RH |
804 | |
805 | config SERIAL_BFIN_UART3 | |
806 | bool "Enable UART3" | |
807 | depends on SERIAL_BFIN && (BF54x) | |
808 | help | |
809 | Enable UART3 | |
810 | ||
811 | config BFIN_UART3_CTSRTS | |
812 | bool "Enable UART3 hardware flow control" | |
813 | depends on SERIAL_BFIN_UART3 | |
814 | help | |
57afb399 | 815 | Enable hardware flow control in the driver. |
d307d36a | 816 | |
1da177e4 LT |
817 | config SERIAL_IMX |
818 | bool "IMX serial port support" | |
e3d13ff4 | 819 | depends on ARM && (ARCH_IMX || ARCH_MXC) |
1da177e4 | 820 | select SERIAL_CORE |
534fca06 | 821 | select RATIONAL |
1da177e4 LT |
822 | help |
823 | If you have a machine based on a Motorola IMX CPU you | |
824 | can enable its onboard serial port by enabling this option. | |
825 | ||
826 | config SERIAL_IMX_CONSOLE | |
827 | bool "Console on IMX serial port" | |
828 | depends on SERIAL_IMX | |
829 | select SERIAL_CORE_CONSOLE | |
830 | help | |
831 | If you have enabled the serial port on the Motorola IMX | |
832 | CPU you can make it the console by answering Y to this option. | |
833 | ||
834 | Even if you say Y here, the currently visible virtual console | |
835 | (/dev/tty0) will still be used as the system console by default, but | |
836 | you can alter that using a kernel command line option such as | |
837 | "console=ttySA0". (Try "man bootparam" or see the documentation of | |
838 | your boot loader (lilo or loadlin) about how to pass options to the | |
839 | kernel at boot time.) | |
840 | ||
238b8721 PK |
841 | config SERIAL_UARTLITE |
842 | tristate "Xilinx uartlite serial port support" | |
447e4460 | 843 | depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE |
238b8721 PK |
844 | select SERIAL_CORE |
845 | help | |
846 | Say Y here if you want to use the Xilinx uartlite serial controller. | |
847 | ||
848 | To compile this driver as a module, choose M here: the | |
4737f097 | 849 | module will be called uartlite. |
238b8721 PK |
850 | |
851 | config SERIAL_UARTLITE_CONSOLE | |
852 | bool "Support for console on Xilinx uartlite serial port" | |
853 | depends on SERIAL_UARTLITE=y | |
854 | select SERIAL_CORE_CONSOLE | |
855 | help | |
856 | Say Y here if you wish to use a Xilinx uartlite as the system | |
857 | console (the system console is the device which receives all kernel | |
858 | messages and warnings and which allows logins in single user mode). | |
859 | ||
1da177e4 LT |
860 | config SERIAL_SUNCORE |
861 | bool | |
0b57ee9e | 862 | depends on SPARC |
1da177e4 LT |
863 | select SERIAL_CORE |
864 | select SERIAL_CORE_CONSOLE | |
865 | default y | |
866 | ||
867 | config SERIAL_SUNZILOG | |
868 | tristate "Sun Zilog8530 serial support" | |
0b57ee9e | 869 | depends on SPARC |
1da177e4 LT |
870 | help |
871 | This driver supports the Zilog8530 serial ports found on many Sparc | |
872 | systems. Say Y or M if you want to be able to these serial ports. | |
873 | ||
874 | config SERIAL_SUNZILOG_CONSOLE | |
875 | bool "Console on Sun Zilog8530 serial port" | |
876 | depends on SERIAL_SUNZILOG=y | |
877 | help | |
878 | If you would like to be able to use the Zilog8530 serial port | |
879 | on your Sparc system as the console, you can do so by answering | |
880 | Y to this option. | |
881 | ||
882 | config SERIAL_SUNSU | |
883 | tristate "Sun SU serial support" | |
0b57ee9e | 884 | depends on SPARC && PCI |
1da177e4 LT |
885 | help |
886 | This driver supports the 8250 serial ports that run the keyboard and | |
887 | mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able | |
888 | to these serial ports. | |
889 | ||
890 | config SERIAL_SUNSU_CONSOLE | |
891 | bool "Console on Sun SU serial port" | |
892 | depends on SERIAL_SUNSU=y | |
893 | help | |
894 | If you would like to be able to use the SU serial port | |
895 | on your Sparc system as the console, you can do so by answering | |
896 | Y to this option. | |
897 | ||
898 | config SERIAL_MUX | |
899 | tristate "Serial MUX support" | |
305f5167 | 900 | depends on GSC |
1da177e4 LT |
901 | select SERIAL_CORE |
902 | default y | |
903 | ---help--- | |
904 | Saying Y here will enable the hardware MUX serial driver for | |
e45da35e CD |
905 | the Nova, K class systems and D class with a 'remote control card'. |
906 | The hardware MUX is not 8250/16550 compatible therefore the | |
907 | /dev/ttyB0 device is shared between the Serial MUX and the PDC | |
908 | software console. The following steps need to be completed to use | |
909 | the Serial MUX: | |
1da177e4 LT |
910 | |
911 | 1. create the device entry (mknod /dev/ttyB0 c 11 0) | |
912 | 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 | |
913 | 3. Add device ttyB0 to /etc/securetty (if you want to log on as | |
914 | root on this console.) | |
915 | 4. Change the kernel command console parameter to: console=ttyB0 | |
916 | ||
917 | config SERIAL_MUX_CONSOLE | |
7111de76 AB |
918 | bool "Support for console on serial MUX" |
919 | depends on SERIAL_MUX=y | |
1da177e4 | 920 | select SERIAL_CORE_CONSOLE |
7111de76 | 921 | default y |
1da177e4 LT |
922 | |
923 | config PDC_CONSOLE | |
924 | bool "PDC software console support" | |
925 | depends on PARISC && !SERIAL_MUX && VT | |
926 | default n | |
927 | help | |
928 | Saying Y here will enable the software based PDC console to be | |
929 | used as the system console. This is useful for machines in | |
930 | which the hardware based console has not been written yet. The | |
931 | following steps must be competed to use the PDC console: | |
932 | ||
933 | 1. create the device entry (mknod /dev/ttyB0 c 11 0) | |
934 | 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 | |
935 | 3. Add device ttyB0 to /etc/securetty (if you want to log on as | |
936 | root on this console.) | |
937 | 4. Change the kernel command console parameter to: console=ttyB0 | |
938 | ||
939 | config SERIAL_SUNSAB | |
940 | tristate "Sun Siemens SAB82532 serial support" | |
0b57ee9e | 941 | depends on SPARC && PCI |
1da177e4 LT |
942 | help |
943 | This driver supports the Siemens SAB82532 DUSCC serial ports on newer | |
944 | (PCI) UltraSPARC systems. Say Y or M if you want to be able to these | |
945 | serial ports. | |
946 | ||
947 | config SERIAL_SUNSAB_CONSOLE | |
948 | bool "Console on Sun Siemens SAB82532 serial port" | |
949 | depends on SERIAL_SUNSAB=y | |
950 | help | |
951 | If you would like to be able to use the SAB82532 serial port | |
952 | on your Sparc system as the console, you can do so by answering | |
953 | Y to this option. | |
954 | ||
02fd473b DM |
955 | config SERIAL_SUNHV |
956 | bool "Sun4v Hypervisor Console support" | |
957 | depends on SPARC64 | |
958 | help | |
959 | This driver supports the console device found on SUN4V Sparc | |
960 | systems. Say Y if you want to be able to use this device. | |
961 | ||
1da177e4 | 962 | config SERIAL_IP22_ZILOG |
5057c98a TB |
963 | tristate "SGI Zilog8530 serial support" |
964 | depends on SGI_HAS_ZILOG | |
1da177e4 LT |
965 | select SERIAL_CORE |
966 | help | |
5057c98a | 967 | This driver supports the Zilog8530 serial ports found on SGI |
1da177e4 LT |
968 | systems. Say Y or M if you want to be able to these serial ports. |
969 | ||
970 | config SERIAL_IP22_ZILOG_CONSOLE | |
5057c98a | 971 | bool "Console on SGI Zilog8530 serial port" |
1da177e4 LT |
972 | depends on SERIAL_IP22_ZILOG=y |
973 | select SERIAL_CORE_CONSOLE | |
974 | ||
1da177e4 | 975 | config SERIAL_SH_SCI |
ecd95616 | 976 | tristate "SuperH SCI(F) serial port support" |
8a77b8d0 | 977 | depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE) |
1da177e4 LT |
978 | select SERIAL_CORE |
979 | ||
ecd95616 PM |
980 | config SERIAL_SH_SCI_NR_UARTS |
981 | int "Maximum number of SCI(F) serial ports" | |
982 | depends on SERIAL_SH_SCI | |
983 | default "2" | |
984 | ||
1da177e4 | 985 | config SERIAL_SH_SCI_CONSOLE |
ecd95616 | 986 | bool "Support for console on SuperH SCI(F)" |
1da177e4 LT |
987 | depends on SERIAL_SH_SCI=y |
988 | select SERIAL_CORE_CONSOLE | |
989 | ||
73a19e4c GL |
990 | config SERIAL_SH_SCI_DMA |
991 | bool "DMA support" | |
992 | depends on SERIAL_SH_SCI && SH_DMAE && EXPERIMENTAL | |
993 | ||
de8211b9 VW |
994 | config SERIAL_PNX8XXX |
995 | bool "Enable PNX8XXX SoCs' UART Support" | |
11455be2 | 996 | depends on MIPS && (SOC_PNX8550 || SOC_PNX833X) |
de8211b9 VW |
997 | select SERIAL_CORE |
998 | help | |
999 | If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 | |
1000 | and you want to use serial ports, say Y. Otherwise, say N. | |
1001 | ||
1002 | config SERIAL_PNX8XXX_CONSOLE | |
1003 | bool "Enable PNX8XX0 serial console" | |
1004 | depends on SERIAL_PNX8XXX | |
1005 | select SERIAL_CORE_CONSOLE | |
1006 | help | |
1007 | If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 | |
1008 | and you want to use serial console, say Y. Otherwise, say N. | |
1009 | ||
1da177e4 LT |
1010 | config SERIAL_CORE |
1011 | tristate | |
1012 | ||
1013 | config SERIAL_CORE_CONSOLE | |
1014 | bool | |
1015 | ||
f2d937f3 JW |
1016 | config CONSOLE_POLL |
1017 | bool | |
1018 | ||
1da177e4 LT |
1019 | config SERIAL_68328 |
1020 | bool "68328 serial support" | |
1021 | depends on M68328 || M68EZ328 || M68VZ328 | |
1022 | help | |
1023 | This driver supports the built-in serial port of the Motorola 68328 | |
09509603 | 1024 | (standard, EZ and VZ varieties). |
1da177e4 LT |
1025 | |
1026 | config SERIAL_68328_RTS_CTS | |
1027 | bool "Support RTS/CTS on 68328 serial port" | |
1028 | depends on SERIAL_68328 | |
1029 | ||
ae1b5f0d | 1030 | config SERIAL_MCF |
02f11f39 | 1031 | bool "Coldfire serial support" |
ae1b5f0d GU |
1032 | depends on COLDFIRE |
1033 | select SERIAL_CORE | |
1034 | help | |
02f11f39 | 1035 | This serial driver supports the Freescale Coldfire serial ports. |
ae1b5f0d GU |
1036 | |
1037 | config SERIAL_MCF_BAUDRATE | |
1038 | int "Default baudrate for Coldfire serial ports" | |
1039 | depends on SERIAL_MCF | |
1040 | default 19200 | |
1041 | help | |
1042 | This setting lets you define what the default baudrate is for the | |
1043 | ColdFire serial ports. The usual default varies from board to board, | |
1044 | and this setting is a way of catering for that. | |
1045 | ||
1046 | config SERIAL_MCF_CONSOLE | |
1047 | bool "Coldfire serial console support" | |
1048 | depends on SERIAL_MCF | |
1049 | select SERIAL_CORE_CONSOLE | |
1050 | help | |
1051 | Enable a ColdFire internal serial port to be the system console. | |
1052 | ||
1da177e4 LT |
1053 | config SERIAL_68360_SMC |
1054 | bool "68360 SMC uart support" | |
1055 | depends on M68360 | |
1056 | help | |
1057 | This driver supports the SMC serial ports of the Motorola 68360 CPU. | |
1058 | ||
1059 | config SERIAL_68360_SCC | |
1060 | bool "68360 SCC uart support" | |
1061 | depends on M68360 | |
1062 | help | |
1063 | This driver supports the SCC serial ports of the Motorola 68360 CPU. | |
1064 | ||
1065 | config SERIAL_68360 | |
1066 | bool | |
1067 | depends on SERIAL_68360_SMC || SERIAL_68360_SCC | |
1068 | default y | |
1069 | ||
1070 | config SERIAL_PMACZILOG | |
ec9cbe09 FT |
1071 | tristate "Mac or PowerMac z85c30 ESCC support" |
1072 | depends on (M68K && MAC) || (PPC_OF && PPC_PMAC) | |
1da177e4 LT |
1073 | select SERIAL_CORE |
1074 | help | |
1075 | This driver supports the Zilog z85C30 serial ports found on | |
ec9cbe09 | 1076 | (Power)Mac machines. |
1da177e4 LT |
1077 | Say Y or M if you want to be able to these serial ports. |
1078 | ||
e4533b24 DW |
1079 | config SERIAL_PMACZILOG_TTYS |
1080 | bool "Use ttySn device nodes for Zilog z85c30" | |
1081 | depends on SERIAL_PMACZILOG | |
1082 | help | |
1083 | The pmac_zilog driver for the z85C30 chip on many powermacs | |
1084 | historically used the device numbers for /dev/ttySn. The | |
1085 | 8250 serial port driver also uses these numbers, which means | |
1086 | the two drivers being unable to coexist; you could not use | |
1087 | both z85C30 and 8250 type ports at the same time. | |
1088 | ||
1089 | If this option is not selected, the pmac_zilog driver will | |
1090 | use the device numbers allocated for /dev/ttyPZn. This allows | |
1091 | the pmac_zilog and 8250 drivers to co-exist, but may cause | |
1092 | existing userspace setups to break. Programs that need to | |
1093 | access the built-in serial ports on powermacs will need to | |
1094 | be reconfigured to use /dev/ttyPZn instead of /dev/ttySn. | |
1095 | ||
1096 | If you enable this option, any z85c30 ports in the system will | |
1097 | be registered as ttyS0 onwards as in the past, and you will be | |
1098 | unable to use the 8250 module for PCMCIA or other 16C550-style | |
1099 | UARTs. | |
1100 | ||
ec9cbe09 | 1101 | Say N unless you need the z85c30 ports on your (Power)Mac |
e4533b24 DW |
1102 | to appear as /dev/ttySn. |
1103 | ||
1da177e4 | 1104 | config SERIAL_PMACZILOG_CONSOLE |
ec9cbe09 | 1105 | bool "Console on Mac or PowerMac z85c30 serial port" |
1da177e4 LT |
1106 | depends on SERIAL_PMACZILOG=y |
1107 | select SERIAL_CORE_CONSOLE | |
1108 | help | |
1109 | If you would like to be able to use the z85c30 serial port | |
ec9cbe09 | 1110 | on your (Power)Mac as the console, you can do so by answering |
1da177e4 LT |
1111 | Y to this option. |
1112 | ||
1da177e4 LT |
1113 | config SERIAL_CPM |
1114 | tristate "CPM SCC/SMC serial port support" | |
1115 | depends on CPM2 || 8xx | |
1116 | select SERIAL_CORE | |
1117 | help | |
1118 | This driver supports the SCC and SMC serial ports on Motorola | |
1119 | embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx) | |
1120 | ||
1121 | config SERIAL_CPM_CONSOLE | |
1122 | bool "Support for console on CPM SCC/SMC serial port" | |
1123 | depends on SERIAL_CPM=y | |
1124 | select SERIAL_CORE_CONSOLE | |
1125 | help | |
1126 | Say Y here if you wish to use a SCC or SMC CPM UART as the system | |
1127 | console (the system console is the device which receives all kernel | |
1128 | messages and warnings and which allows logins in single user mode). | |
1129 | ||
1130 | Even if you say Y here, the currently visible framebuffer console | |
1131 | (/dev/tty0) will still be used as the system console by default, but | |
1132 | you can alter that using a kernel command line option such as | |
1133 | "console=ttyCPM0". (Try "man bootparam" or see the documentation of | |
1134 | your boot loader (lilo or loadlin) about how to pass options to the | |
1135 | kernel at boot time.) | |
1136 | ||
1da177e4 LT |
1137 | config SERIAL_SGI_L1_CONSOLE |
1138 | bool "SGI Altix L1 serial console support" | |
1139 | depends on IA64_GENERIC || IA64_SGI_SN2 | |
1140 | select SERIAL_CORE | |
1141 | select SERIAL_CORE_CONSOLE | |
1142 | help | |
1143 | If you have an SGI Altix and you would like to use the system | |
1144 | controller serial port as your console (you want this!), | |
1145 | say Y. Otherwise, say N. | |
1146 | ||
1147 | config SERIAL_MPC52xx | |
25ae3a07 JR |
1148 | tristate "Freescale MPC52xx/MPC512x family PSC serial support" |
1149 | depends on PPC_MPC52xx || PPC_MPC512x | |
1da177e4 LT |
1150 | select SERIAL_CORE |
1151 | help | |
25ae3a07 JR |
1152 | This driver supports MPC52xx and MPC512x PSC serial ports. If you would |
1153 | like to use them, you must answer Y or M to this option. Note that | |
1da177e4 LT |
1154 | for use as console, it must be included in kernel and not as a |
1155 | module. | |
1156 | ||
1157 | config SERIAL_MPC52xx_CONSOLE | |
25ae3a07 | 1158 | bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port" |
1da177e4 LT |
1159 | depends on SERIAL_MPC52xx=y |
1160 | select SERIAL_CORE_CONSOLE | |
1161 | help | |
1162 | Select this options if you'd like to use one of the PSC serial port | |
1163 | of the Freescale MPC52xx family as a console. | |
1164 | ||
1165 | config SERIAL_MPC52xx_CONSOLE_BAUD | |
25ae3a07 | 1166 | int "Freescale MPC52xx/MPC512x family PSC serial port baud" |
1da177e4 LT |
1167 | depends on SERIAL_MPC52xx_CONSOLE=y |
1168 | default "9600" | |
1169 | help | |
1170 | Select the MPC52xx console baud rate. | |
1171 | This value is only used if the bootloader doesn't pass in the | |
1172 | console baudrate | |
1173 | ||
1174 | config SERIAL_ICOM | |
1175 | tristate "IBM Multiport Serial Adapter" | |
145d01e4 | 1176 | depends on PCI && (PPC_ISERIES || PPC_PSERIES) |
1da177e4 | 1177 | select SERIAL_CORE |
cb2fc532 | 1178 | select FW_LOADER |
1da177e4 LT |
1179 | help |
1180 | This driver is for a family of multiport serial adapters | |
1181 | including 2 port RVX, 2 port internal modem, 4 port internal | |
1182 | modem and a split 1 port RVX and 1 port internal modem. | |
1183 | ||
1184 | This driver can also be built as a module. If so, the module | |
1185 | will be called icom. | |
1186 | ||
1187 | config SERIAL_M32R_SIO | |
1188 | bool "M32R SIO I/F" | |
1189 | depends on M32R | |
1190 | default y | |
1191 | select SERIAL_CORE | |
1192 | help | |
1193 | Say Y here if you want to use the M32R serial controller. | |
1194 | ||
1195 | config SERIAL_M32R_SIO_CONSOLE | |
1196 | bool "use SIO console" | |
1197 | depends on SERIAL_M32R_SIO=y | |
1198 | select SERIAL_CORE_CONSOLE | |
1199 | help | |
1200 | Say Y here if you want to support a serial console. | |
1201 | ||
1202 | If you use an M3T-M32700UT or an OPSPUT platform, | |
1203 | please say also y for SERIAL_M32R_PLDSIO. | |
1204 | ||
1205 | config SERIAL_M32R_PLDSIO | |
1206 | bool "M32R SIO I/F on a PLD" | |
d600b97c | 1207 | depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT) |
1da177e4 LT |
1208 | default n |
1209 | help | |
1210 | Say Y here if you want to use the M32R serial controller | |
1211 | on a PLD (Programmable Logic Device). | |
1212 | ||
1213 | If you use an M3T-M32700UT or an OPSPUT platform, | |
1214 | please say Y. | |
1215 | ||
1216 | config SERIAL_TXX9 | |
1217 | bool "TMPTX39XX/49XX SIO support" | |
bef1f402 | 1218 | depends on HAS_TXX9_SERIAL |
1da177e4 LT |
1219 | select SERIAL_CORE |
1220 | default y | |
1221 | ||
1222 | config HAS_TXX9_SERIAL | |
1223 | bool | |
1224 | ||
138c5d25 AN |
1225 | config SERIAL_TXX9_NR_UARTS |
1226 | int "Maximum number of TMPTX39XX/49XX SIO ports" | |
1227 | depends on SERIAL_TXX9 | |
1228 | default "6" | |
1229 | ||
1da177e4 LT |
1230 | config SERIAL_TXX9_CONSOLE |
1231 | bool "TMPTX39XX/49XX SIO Console support" | |
1232 | depends on SERIAL_TXX9=y | |
1233 | select SERIAL_CORE_CONSOLE | |
1234 | ||
1235 | config SERIAL_TXX9_STDSERIAL | |
1236 | bool "TX39XX/49XX SIO act as standard serial" | |
1237 | depends on !SERIAL_8250 && SERIAL_TXX9 | |
1238 | ||
1239 | config SERIAL_VR41XX | |
1240 | tristate "NEC VR4100 series Serial Interface Unit support" | |
1241 | depends on CPU_VR41XX | |
1242 | select SERIAL_CORE | |
1243 | help | |
1244 | If you have a NEC VR4100 series processor and you want to use | |
1245 | Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU) | |
1246 | (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N. | |
1247 | ||
1248 | config SERIAL_VR41XX_CONSOLE | |
1249 | bool "Enable NEC VR4100 series Serial Interface Unit console" | |
2174041d | 1250 | depends on SERIAL_VR41XX=y |
1da177e4 LT |
1251 | select SERIAL_CORE_CONSOLE |
1252 | help | |
1253 | If you have a NEC VR4100 series processor and you want to use | |
1254 | a console on a serial port, say Y. Otherwise, say N. | |
1255 | ||
1256 | config SERIAL_JSM | |
0a577ce3 AK |
1257 | tristate "Digi International NEO PCI Support" |
1258 | depends on PCI | |
1259 | select SERIAL_CORE | |
1260 | help | |
1261 | This is a driver for Digi International's Neo series | |
1262 | of cards which provide multiple serial ports. You would need | |
1263 | something like this to connect more than two modems to your Linux | |
1264 | box, for instance in order to become a dial-in server. This driver | |
1265 | supports PCI boards only. | |
a5f1e4ed AO |
1266 | |
1267 | If you have a card like this, say Y here, otherwise say N. | |
0a577ce3 AK |
1268 | |
1269 | To compile this driver as a module, choose M here: the | |
1270 | module will be called jsm. | |
1da177e4 | 1271 | |
e5d310b3 BC |
1272 | config SERIAL_SGI_IOC4 |
1273 | tristate "SGI IOC4 controller serial support" | |
1274 | depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4 | |
1275 | select SERIAL_CORE | |
1276 | help | |
1277 | If you have an SGI Altix with an IOC4 based Base IO card | |
1278 | and wish to use the serial ports on this card, say Y. | |
1279 | Otherwise, say N. | |
1280 | ||
2d0cfb52 PG |
1281 | config SERIAL_SGI_IOC3 |
1282 | tristate "SGI Altix IOC3 serial support" | |
1283 | depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3 | |
1284 | select SERIAL_CORE | |
1285 | help | |
1286 | If you have an SGI Altix with an IOC3 serial card, | |
1287 | say Y or M. Otherwise, say N. | |
1288 | ||
04896a77 RL |
1289 | config SERIAL_MSM |
1290 | bool "MSM on-chip serial port support" | |
1291 | depends on ARM && ARCH_MSM | |
1292 | select SERIAL_CORE | |
1293 | ||
1294 | config SERIAL_MSM_CONSOLE | |
1295 | bool "MSM serial console support" | |
1296 | depends on SERIAL_MSM=y | |
1297 | select SERIAL_CORE_CONSOLE | |
1298 | ||
55046237 MR |
1299 | config SERIAL_MSM_HS |
1300 | tristate "MSM UART High Speed: Serial Driver" | |
1301 | depends on ARCH_MSM | |
1302 | select SERIAL_CORE | |
1303 | help | |
1304 | If you have a machine based on MSM family of SoCs, you | |
1305 | can enable its onboard high speed serial port by enabling | |
1306 | this option. | |
1307 | ||
1308 | Choose M here to compile it as a module. The module will be | |
1309 | called msm_serial_hs. | |
1310 | ||
304e1266 AC |
1311 | config SERIAL_VT8500 |
1312 | bool "VIA VT8500 on-chip serial port support" | |
1313 | depends on ARM && ARCH_VT8500 | |
1314 | select SERIAL_CORE | |
1315 | ||
1316 | config SERIAL_VT8500_CONSOLE | |
1317 | bool "VIA VT8500 serial console support" | |
1318 | depends on SERIAL_VT8500=y | |
1319 | select SERIAL_CORE_CONSOLE | |
1320 | ||
f8441e13 | 1321 | config SERIAL_NETX |
fb881f78 | 1322 | tristate "NetX serial port support" |
f8441e13 SH |
1323 | depends on ARM && ARCH_NETX |
1324 | select SERIAL_CORE | |
1325 | help | |
1326 | If you have a machine based on a Hilscher NetX SoC you | |
1327 | can enable its onboard serial port by enabling this option. | |
1328 | ||
1329 | To compile this driver as a module, choose M here: the | |
1330 | module will be called netx-serial. | |
1331 | ||
1332 | config SERIAL_NETX_CONSOLE | |
1333 | bool "Console on NetX serial port" | |
fb881f78 | 1334 | depends on SERIAL_NETX=y |
f8441e13 SH |
1335 | select SERIAL_CORE_CONSOLE |
1336 | help | |
b885b27c UKK |
1337 | If you have enabled the serial port on the Hilscher NetX SoC |
1338 | you can make it the console by answering Y to this option. | |
f8441e13 | 1339 | |
8d38a5b2 AB |
1340 | config SERIAL_OF_PLATFORM |
1341 | tristate "Serial port on Open Firmware platform bus" | |
236cdc7b | 1342 | depends on OF |
5886188d | 1343 | depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL |
8d38a5b2 AB |
1344 | help |
1345 | If you have a PowerPC based system that has serial ports | |
1346 | on a platform specific bus, you should enable this option. | |
1347 | Currently, only 8250 compatible ports are supported, but | |
1348 | others can easily be added. | |
1349 | ||
b612633b G |
1350 | config SERIAL_OMAP |
1351 | tristate "OMAP serial port support" | |
1352 | depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 | |
1353 | select SERIAL_CORE | |
1354 | help | |
1355 | If you have a machine based on an Texas Instruments OMAP CPU you | |
1356 | can enable its onboard serial ports by enabling this option. | |
1357 | ||
1358 | By enabling this option you take advantage of dma feature available | |
1359 | with the omap-serial driver. DMA support can be enabled from platform | |
1360 | data. | |
1361 | ||
1362 | config SERIAL_OMAP_CONSOLE | |
1363 | bool "Console on OMAP serial port" | |
1364 | depends on SERIAL_OMAP | |
1365 | select SERIAL_CORE_CONSOLE | |
1366 | help | |
1367 | Select this option if you would like to use omap serial port as | |
1368 | console. | |
1369 | ||
1370 | Even if you say Y here, the currently visible virtual console | |
1371 | (/dev/tty0) will still be used as the system console by default, but | |
1372 | you can alter that using a kernel command line option such as | |
1373 | "console=ttyOx". (Try "man bootparam" or see the documentation of | |
1374 | your boot loader about how to pass options to the kernel at | |
1375 | boot time.) | |
1376 | ||
5886188d BK |
1377 | config SERIAL_OF_PLATFORM_NWPSERIAL |
1378 | tristate "NWP serial port driver" | |
1379 | depends on PPC_OF && PPC_DCR | |
1380 | select SERIAL_OF_PLATFORM | |
1381 | select SERIAL_CORE_CONSOLE | |
1382 | select SERIAL_CORE | |
1383 | help | |
1384 | This driver supports the cell network processor nwp serial | |
1385 | device. | |
1386 | ||
1387 | config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE | |
1388 | bool "Console on NWP serial port" | |
1389 | depends on SERIAL_OF_PLATFORM_NWPSERIAL=y | |
1390 | select SERIAL_CORE_CONSOLE | |
1391 | help | |
1392 | Support for Console on the NWP serial ports. | |
1393 | ||
2f0fc415 JC |
1394 | config SERIAL_LANTIQ |
1395 | bool "Lantiq serial driver" | |
1396 | depends on LANTIQ | |
1397 | select SERIAL_CORE | |
1398 | select SERIAL_CORE_CONSOLE | |
1399 | help | |
1400 | Support for console and UART on Lantiq SoCs. | |
1401 | ||
d7584ed2 TT |
1402 | config SERIAL_QE |
1403 | tristate "Freescale QUICC Engine serial port support" | |
1404 | depends on QUICC_ENGINE | |
1405 | select SERIAL_CORE | |
1406 | select FW_LOADER | |
1407 | default n | |
1408 | help | |
1409 | This driver supports the QE serial ports on Freescale embedded | |
1410 | PowerPC that contain a QUICC Engine. | |
1411 | ||
eea63e0e TB |
1412 | config SERIAL_SC26XX |
1413 | tristate "SC2681/SC2692 serial port support" | |
1414 | depends on SNI_RM | |
1415 | select SERIAL_CORE | |
1416 | help | |
1417 | This is a driver for the onboard serial ports of | |
1418 | older RM400 machines. | |
1419 | ||
1420 | config SERIAL_SC26XX_CONSOLE | |
1421 | bool "Console on SC2681/SC2692 serial port" | |
1422 | depends on SERIAL_SC26XX | |
1423 | select SERIAL_CORE_CONSOLE | |
1424 | help | |
1425 | Support for Console on SC2681/SC2692 serial ports. | |
1426 | ||
2f351741 | 1427 | config SERIAL_BFIN_SPORT |
d671250b MF |
1428 | tristate "Blackfin SPORT emulate UART" |
1429 | depends on BLACKFIN | |
2f351741 BW |
1430 | select SERIAL_CORE |
1431 | help | |
692105b8 | 1432 | Enable SPORT emulate UART on Blackfin series. |
2f351741 BW |
1433 | |
1434 | To compile this driver as a module, choose M here: the | |
1435 | module will be called bfin_sport_uart. | |
1436 | ||
ccf68e59 | 1437 | config SERIAL_BFIN_SPORT_CONSOLE |
1438 | bool "Console on Blackfin sport emulated uart" | |
1439 | depends on SERIAL_BFIN_SPORT=y | |
1440 | select SERIAL_CORE_CONSOLE | |
2f351741 | 1441 | |
ccf68e59 | 1442 | config SERIAL_BFIN_SPORT0_UART |
1443 | bool "Enable UART over SPORT0" | |
be991593 | 1444 | depends on SERIAL_BFIN_SPORT && !(BF542 || BF544) |
ccf68e59 | 1445 | help |
1446 | Enable UART over SPORT0 | |
2f351741 | 1447 | |
1f7d1c85 SZ |
1448 | config SERIAL_BFIN_SPORT0_UART_CTSRTS |
1449 | bool "Enable UART over SPORT0 hardware flow control" | |
1450 | depends on SERIAL_BFIN_SPORT0_UART | |
1451 | help | |
1452 | Enable hardware flow control in the driver. | |
1453 | ||
ccf68e59 | 1454 | config SERIAL_BFIN_SPORT1_UART |
1455 | bool "Enable UART over SPORT1" | |
1456 | depends on SERIAL_BFIN_SPORT | |
1457 | help | |
1458 | Enable UART over SPORT1 | |
2f351741 | 1459 | |
1f7d1c85 SZ |
1460 | config SERIAL_BFIN_SPORT1_UART_CTSRTS |
1461 | bool "Enable UART over SPORT1 hardware flow control" | |
1462 | depends on SERIAL_BFIN_SPORT1_UART | |
1463 | help | |
1464 | Enable hardware flow control in the driver. | |
1465 | ||
ccf68e59 | 1466 | config SERIAL_BFIN_SPORT2_UART |
1467 | bool "Enable UART over SPORT2" | |
1468 | depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) | |
1469 | help | |
1470 | Enable UART over SPORT2 | |
2f351741 | 1471 | |
1f7d1c85 SZ |
1472 | config SERIAL_BFIN_SPORT2_UART_CTSRTS |
1473 | bool "Enable UART over SPORT2 hardware flow control" | |
1474 | depends on SERIAL_BFIN_SPORT2_UART | |
1475 | help | |
1476 | Enable hardware flow control in the driver. | |
1477 | ||
ccf68e59 | 1478 | config SERIAL_BFIN_SPORT3_UART |
1479 | bool "Enable UART over SPORT3" | |
1480 | depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) | |
1481 | help | |
1482 | Enable UART over SPORT3 | |
2f351741 | 1483 | |
1f7d1c85 SZ |
1484 | config SERIAL_BFIN_SPORT3_UART_CTSRTS |
1485 | bool "Enable UART over SPORT3 hardware flow control" | |
1486 | depends on SERIAL_BFIN_SPORT3_UART | |
1487 | help | |
1488 | Enable hardware flow control in the driver. | |
1489 | ||
34aec591 RR |
1490 | config SERIAL_TIMBERDALE |
1491 | tristate "Support for timberdale UART" | |
34aec591 RR |
1492 | select SERIAL_CORE |
1493 | ---help--- | |
1494 | Add support for UART controller on timberdale. | |
1495 | ||
9fcd66e5 MB |
1496 | config SERIAL_BCM63XX |
1497 | tristate "bcm63xx serial port support" | |
1498 | select SERIAL_CORE | |
1499 | depends on BCM63XX | |
1500 | help | |
1501 | If you have a bcm63xx CPU, you can enable its onboard | |
1502 | serial port by enabling this options. | |
1503 | ||
1504 | To compile this driver as a module, choose M here: the | |
1505 | module will be called bcm963xx_uart. | |
1506 | ||
1507 | config SERIAL_BCM63XX_CONSOLE | |
1508 | bool "Console on bcm63xx serial port" | |
1509 | depends on SERIAL_BCM63XX=y | |
1510 | select SERIAL_CORE_CONSOLE | |
1511 | help | |
1512 | If you have enabled the serial port on the bcm63xx CPU | |
1513 | you can make it the console by answering Y to this option. | |
1514 | ||
d4ac42a5 KG |
1515 | config SERIAL_GRLIB_GAISLER_APBUART |
1516 | tristate "GRLIB APBUART serial support" | |
6cd7a637 | 1517 | depends on OF && SPARC |
fed7bb32 | 1518 | select SERIAL_CORE |
d4ac42a5 KG |
1519 | ---help--- |
1520 | Add support for the GRLIB APBUART serial port. | |
1521 | ||
1522 | config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE | |
1523 | bool "Console on GRLIB APBUART serial port" | |
1524 | depends on SERIAL_GRLIB_GAISLER_APBUART=y | |
1525 | select SERIAL_CORE_CONSOLE | |
1526 | help | |
1527 | Support for running a console on the GRLIB APBUART | |
1528 | ||
5bcd6010 TK |
1529 | config SERIAL_ALTERA_JTAGUART |
1530 | tristate "Altera JTAG UART support" | |
1531 | select SERIAL_CORE | |
1532 | help | |
1533 | This driver supports the Altera JTAG UART port. | |
1534 | ||
1535 | config SERIAL_ALTERA_JTAGUART_CONSOLE | |
1536 | bool "Altera JTAG UART console support" | |
1537 | depends on SERIAL_ALTERA_JTAGUART=y | |
1538 | select SERIAL_CORE_CONSOLE | |
1539 | help | |
1540 | Enable a Altera JTAG UART port to be the system console. | |
1541 | ||
1542 | config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS | |
1543 | bool "Bypass output when no connection" | |
1544 | depends on SERIAL_ALTERA_JTAGUART_CONSOLE | |
1545 | select SERIAL_CORE_CONSOLE | |
1546 | help | |
1547 | Bypass console output and keep going even if there is no | |
1548 | JTAG terminal connection with the host. | |
1549 | ||
6b7d8f8b TK |
1550 | config SERIAL_ALTERA_UART |
1551 | tristate "Altera UART support" | |
1552 | select SERIAL_CORE | |
1553 | help | |
1554 | This driver supports the Altera softcore UART port. | |
1555 | ||
1556 | config SERIAL_ALTERA_UART_MAXPORTS | |
1557 | int "Maximum number of Altera UART ports" | |
1558 | depends on SERIAL_ALTERA_UART | |
1559 | default 4 | |
1560 | help | |
1561 | This setting lets you define the maximum number of the Altera | |
1562 | UART ports. The usual default varies from board to board, and | |
1563 | this setting is a way of catering for that. | |
1564 | ||
1565 | config SERIAL_ALTERA_UART_BAUDRATE | |
1566 | int "Default baudrate for Altera UART ports" | |
1567 | depends on SERIAL_ALTERA_UART | |
1568 | default 115200 | |
1569 | help | |
1570 | This setting lets you define what the default baudrate is for the | |
1571 | Altera UART ports. The usual default varies from board to board, | |
1572 | and this setting is a way of catering for that. | |
1573 | ||
1574 | config SERIAL_ALTERA_UART_CONSOLE | |
1575 | bool "Altera UART console support" | |
1576 | depends on SERIAL_ALTERA_UART=y | |
1577 | select SERIAL_CORE_CONSOLE | |
1578 | help | |
1579 | Enable a Altera UART port to be the system console. | |
1580 | ||
af3b8881 RG |
1581 | config SERIAL_IFX6X60 |
1582 | tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)" | |
8ddbe5ed | 1583 | depends on GPIOLIB && SPI && EXPERIMENTAL |
af3b8881 RG |
1584 | help |
1585 | Support for the IFX6x60 modem devices on Intel MID platforms. | |
1586 | ||
3c6a4832 | 1587 | config SERIAL_PCH_UART |
177c2cbf | 1588 | tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) UART" |
380042f2 | 1589 | depends on PCI |
3c6a4832 | 1590 | select SERIAL_CORE |
3c6a4832 TM |
1591 | help |
1592 | This driver is for PCH(Platform controller Hub) UART of Intel EG20T | |
1593 | which is an IOH(Input/Output Hub) for x86 embedded processor. | |
1594 | Enabling PCH_DMA, this PCH UART works as DMA mode. | |
4564e1ef | 1595 | |
177c2cbf TM |
1596 | This driver also can be used for OKI SEMICONDUCTOR IOH(Input/ |
1597 | Output Hub), ML7213 and ML7223. | |
1598 | ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is | |
1599 | for MP(Media Phone) use. | |
1600 | ML7213/ML7223 is companion chip for Intel Atom E6xx series. | |
1601 | ML7213/ML7223 is completely compatible for Intel EG20T PCH. | |
daaf6ff4 NV |
1602 | |
1603 | config SERIAL_MSM_SMD | |
1604 | bool "Enable tty device interface for some SMD ports" | |
1605 | default n | |
1606 | depends on MSM_SMD | |
1607 | help | |
1608 | Enables userspace clients to read and write to some streaming SMD | |
1609 | ports via tty device interface for MSM chipset. | |
1610 | ||
47d37d6f SH |
1611 | config SERIAL_MXS_AUART |
1612 | depends on ARCH_MXS | |
1613 | tristate "MXS AUART support" | |
1614 | select SERIAL_CORE | |
1615 | help | |
1616 | This driver supports the MXS Application UART (AUART) port. | |
1617 | ||
1618 | config SERIAL_MXS_AUART_CONSOLE | |
1619 | bool "MXS AUART console support" | |
1620 | depends on SERIAL_MXS_AUART=y | |
1621 | select SERIAL_CORE_CONSOLE | |
1622 | help | |
1623 | Enable a MXS AUART port to be the system console. | |
1624 | ||
61ec9016 JL |
1625 | config SERIAL_XILINX_PS_UART |
1626 | tristate "Xilinx PS UART support" | |
1627 | select SERIAL_CORE | |
1628 | help | |
1629 | This driver supports the Xilinx PS UART port. | |
1630 | ||
1631 | config SERIAL_XILINX_PS_UART_CONSOLE | |
1632 | bool "Xilinx PS UART console support" | |
1633 | depends on SERIAL_XILINX_PS_UART=y | |
1634 | select SERIAL_CORE_CONSOLE | |
1635 | help | |
1636 | Enable a Xilinx PS UART port to be the system console. | |
1637 | ||
1da177e4 | 1638 | endmenu |