Commit | Line | Data |
---|---|---|
99edb3d1 | 1 | /* |
b497549a BD |
2 | * Driver core for Samsung SoC onboard UARTs. |
3 | * | |
ccae941e | 4 | * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics |
b497549a BD |
5 | * http://armlinux.simtec.co.uk/ |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License version 2 as | |
9 | * published by the Free Software Foundation. | |
10 | */ | |
11 | ||
12 | /* Hote on 2410 error handling | |
13 | * | |
14 | * The s3c2410 manual has a love/hate affair with the contents of the | |
15 | * UERSTAT register in the UART blocks, and keeps marking some of the | |
16 | * error bits as reserved. Having checked with the s3c2410x01, | |
17 | * it copes with BREAKs properly, so I am happy to ignore the RESERVED | |
18 | * feature from the latter versions of the manual. | |
19 | * | |
20 | * If it becomes aparrent that latter versions of the 2410 remove these | |
21 | * bits, then action will have to be taken to differentiate the versions | |
22 | * and change the policy on BREAK | |
23 | * | |
24 | * BJD, 04-Nov-2004 | |
25 | */ | |
26 | ||
27 | #if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) | |
28 | #define SUPPORT_SYSRQ | |
29 | #endif | |
30 | ||
31 | #include <linux/module.h> | |
32 | #include <linux/ioport.h> | |
33 | #include <linux/io.h> | |
34 | #include <linux/platform_device.h> | |
35 | #include <linux/init.h> | |
36 | #include <linux/sysrq.h> | |
37 | #include <linux/console.h> | |
38 | #include <linux/tty.h> | |
39 | #include <linux/tty_flip.h> | |
40 | #include <linux/serial_core.h> | |
41 | #include <linux/serial.h> | |
42 | #include <linux/delay.h> | |
43 | #include <linux/clk.h> | |
30555476 | 44 | #include <linux/cpufreq.h> |
26c919e1 | 45 | #include <linux/of.h> |
b497549a BD |
46 | |
47 | #include <asm/irq.h> | |
48 | ||
a09e64fb | 49 | #include <mach/hardware.h> |
b690ace5 | 50 | #include <mach/map.h> |
b497549a | 51 | |
a2b7ba9c | 52 | #include <plat/regs-serial.h> |
5f5a7a55 | 53 | #include <plat/clock.h> |
b497549a BD |
54 | |
55 | #include "samsung.h" | |
56 | ||
57 | /* UART name and device definitions */ | |
58 | ||
59 | #define S3C24XX_SERIAL_NAME "ttySAC" | |
60 | #define S3C24XX_SERIAL_MAJOR 204 | |
61 | #define S3C24XX_SERIAL_MINOR 64 | |
62 | ||
b497549a BD |
63 | /* macros to change one thing to another */ |
64 | ||
65 | #define tx_enabled(port) ((port)->unused[0]) | |
66 | #define rx_enabled(port) ((port)->unused[1]) | |
67 | ||
25985edc | 68 | /* flag to ignore all characters coming in */ |
b497549a BD |
69 | #define RXSTAT_DUMMY_READ (0x10000000) |
70 | ||
71 | static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port) | |
72 | { | |
73 | return container_of(port, struct s3c24xx_uart_port, port); | |
74 | } | |
75 | ||
76 | /* translate a port to the device name */ | |
77 | ||
78 | static inline const char *s3c24xx_serial_portname(struct uart_port *port) | |
79 | { | |
80 | return to_platform_device(port->dev)->name; | |
81 | } | |
82 | ||
83 | static int s3c24xx_serial_txempty_nofifo(struct uart_port *port) | |
84 | { | |
9303ac15 | 85 | return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE; |
b497549a BD |
86 | } |
87 | ||
88bb4ea1 TA |
88 | /* |
89 | * s3c64xx and later SoC's include the interrupt mask and status registers in | |
90 | * the controller itself, unlike the s3c24xx SoC's which have these registers | |
91 | * in the interrupt controller. Check if the port type is s3c64xx or higher. | |
92 | */ | |
93 | static int s3c24xx_serial_has_interrupt_mask(struct uart_port *port) | |
94 | { | |
95 | return to_ourport(port)->info->type == PORT_S3C6400; | |
96 | } | |
97 | ||
b497549a BD |
98 | static void s3c24xx_serial_rx_enable(struct uart_port *port) |
99 | { | |
100 | unsigned long flags; | |
101 | unsigned int ucon, ufcon; | |
102 | int count = 10000; | |
103 | ||
104 | spin_lock_irqsave(&port->lock, flags); | |
105 | ||
106 | while (--count && !s3c24xx_serial_txempty_nofifo(port)) | |
107 | udelay(100); | |
108 | ||
109 | ufcon = rd_regl(port, S3C2410_UFCON); | |
110 | ufcon |= S3C2410_UFCON_RESETRX; | |
111 | wr_regl(port, S3C2410_UFCON, ufcon); | |
112 | ||
113 | ucon = rd_regl(port, S3C2410_UCON); | |
114 | ucon |= S3C2410_UCON_RXIRQMODE; | |
115 | wr_regl(port, S3C2410_UCON, ucon); | |
116 | ||
117 | rx_enabled(port) = 1; | |
118 | spin_unlock_irqrestore(&port->lock, flags); | |
119 | } | |
120 | ||
121 | static void s3c24xx_serial_rx_disable(struct uart_port *port) | |
122 | { | |
123 | unsigned long flags; | |
124 | unsigned int ucon; | |
125 | ||
126 | spin_lock_irqsave(&port->lock, flags); | |
127 | ||
128 | ucon = rd_regl(port, S3C2410_UCON); | |
129 | ucon &= ~S3C2410_UCON_RXIRQMODE; | |
130 | wr_regl(port, S3C2410_UCON, ucon); | |
131 | ||
132 | rx_enabled(port) = 0; | |
133 | spin_unlock_irqrestore(&port->lock, flags); | |
134 | } | |
135 | ||
136 | static void s3c24xx_serial_stop_tx(struct uart_port *port) | |
137 | { | |
b73c289c BD |
138 | struct s3c24xx_uart_port *ourport = to_ourport(port); |
139 | ||
b497549a | 140 | if (tx_enabled(port)) { |
88bb4ea1 TA |
141 | if (s3c24xx_serial_has_interrupt_mask(port)) |
142 | __set_bit(S3C64XX_UINTM_TXD, | |
143 | portaddrl(port, S3C64XX_UINTM)); | |
144 | else | |
145 | disable_irq_nosync(ourport->tx_irq); | |
b497549a BD |
146 | tx_enabled(port) = 0; |
147 | if (port->flags & UPF_CONS_FLOW) | |
148 | s3c24xx_serial_rx_enable(port); | |
149 | } | |
150 | } | |
151 | ||
152 | static void s3c24xx_serial_start_tx(struct uart_port *port) | |
153 | { | |
b73c289c BD |
154 | struct s3c24xx_uart_port *ourport = to_ourport(port); |
155 | ||
b497549a BD |
156 | if (!tx_enabled(port)) { |
157 | if (port->flags & UPF_CONS_FLOW) | |
158 | s3c24xx_serial_rx_disable(port); | |
159 | ||
88bb4ea1 TA |
160 | if (s3c24xx_serial_has_interrupt_mask(port)) |
161 | __clear_bit(S3C64XX_UINTM_TXD, | |
162 | portaddrl(port, S3C64XX_UINTM)); | |
163 | else | |
164 | enable_irq(ourport->tx_irq); | |
b497549a BD |
165 | tx_enabled(port) = 1; |
166 | } | |
167 | } | |
168 | ||
b497549a BD |
169 | static void s3c24xx_serial_stop_rx(struct uart_port *port) |
170 | { | |
b73c289c BD |
171 | struct s3c24xx_uart_port *ourport = to_ourport(port); |
172 | ||
b497549a BD |
173 | if (rx_enabled(port)) { |
174 | dbg("s3c24xx_serial_stop_rx: port=%p\n", port); | |
88bb4ea1 TA |
175 | if (s3c24xx_serial_has_interrupt_mask(port)) |
176 | __set_bit(S3C64XX_UINTM_RXD, | |
177 | portaddrl(port, S3C64XX_UINTM)); | |
178 | else | |
179 | disable_irq_nosync(ourport->rx_irq); | |
b497549a BD |
180 | rx_enabled(port) = 0; |
181 | } | |
182 | } | |
183 | ||
184 | static void s3c24xx_serial_enable_ms(struct uart_port *port) | |
185 | { | |
186 | } | |
187 | ||
188 | static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port) | |
189 | { | |
190 | return to_ourport(port)->info; | |
191 | } | |
192 | ||
193 | static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port) | |
194 | { | |
4d84e970 TA |
195 | struct s3c24xx_uart_port *ourport; |
196 | ||
b497549a BD |
197 | if (port->dev == NULL) |
198 | return NULL; | |
199 | ||
4d84e970 TA |
200 | ourport = container_of(port, struct s3c24xx_uart_port, port); |
201 | return ourport->cfg; | |
b497549a BD |
202 | } |
203 | ||
204 | static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, | |
205 | unsigned long ufstat) | |
206 | { | |
207 | struct s3c24xx_uart_info *info = ourport->info; | |
208 | ||
209 | if (ufstat & info->rx_fifofull) | |
da121506 | 210 | return ourport->port.fifosize; |
b497549a BD |
211 | |
212 | return (ufstat & info->rx_fifomask) >> info->rx_fifoshift; | |
213 | } | |
214 | ||
215 | ||
216 | /* ? - where has parity gone?? */ | |
217 | #define S3C2410_UERSTAT_PARITY (0x1000) | |
218 | ||
219 | static irqreturn_t | |
220 | s3c24xx_serial_rx_chars(int irq, void *dev_id) | |
221 | { | |
222 | struct s3c24xx_uart_port *ourport = dev_id; | |
223 | struct uart_port *port = &ourport->port; | |
ebd2c8f6 | 224 | struct tty_struct *tty = port->state->port.tty; |
b497549a BD |
225 | unsigned int ufcon, ch, flag, ufstat, uerstat; |
226 | int max_count = 64; | |
227 | ||
228 | while (max_count-- > 0) { | |
229 | ufcon = rd_regl(port, S3C2410_UFCON); | |
230 | ufstat = rd_regl(port, S3C2410_UFSTAT); | |
231 | ||
232 | if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0) | |
233 | break; | |
234 | ||
235 | uerstat = rd_regl(port, S3C2410_UERSTAT); | |
236 | ch = rd_regb(port, S3C2410_URXH); | |
237 | ||
238 | if (port->flags & UPF_CONS_FLOW) { | |
239 | int txe = s3c24xx_serial_txempty_nofifo(port); | |
240 | ||
241 | if (rx_enabled(port)) { | |
242 | if (!txe) { | |
243 | rx_enabled(port) = 0; | |
244 | continue; | |
245 | } | |
246 | } else { | |
247 | if (txe) { | |
248 | ufcon |= S3C2410_UFCON_RESETRX; | |
249 | wr_regl(port, S3C2410_UFCON, ufcon); | |
250 | rx_enabled(port) = 1; | |
251 | goto out; | |
252 | } | |
253 | continue; | |
254 | } | |
255 | } | |
256 | ||
257 | /* insert the character into the buffer */ | |
258 | ||
259 | flag = TTY_NORMAL; | |
260 | port->icount.rx++; | |
261 | ||
262 | if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) { | |
263 | dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n", | |
264 | ch, uerstat); | |
265 | ||
266 | /* check for break */ | |
267 | if (uerstat & S3C2410_UERSTAT_BREAK) { | |
268 | dbg("break!\n"); | |
269 | port->icount.brk++; | |
270 | if (uart_handle_break(port)) | |
9303ac15 | 271 | goto ignore_char; |
b497549a BD |
272 | } |
273 | ||
274 | if (uerstat & S3C2410_UERSTAT_FRAME) | |
275 | port->icount.frame++; | |
276 | if (uerstat & S3C2410_UERSTAT_OVERRUN) | |
277 | port->icount.overrun++; | |
278 | ||
279 | uerstat &= port->read_status_mask; | |
280 | ||
281 | if (uerstat & S3C2410_UERSTAT_BREAK) | |
282 | flag = TTY_BREAK; | |
283 | else if (uerstat & S3C2410_UERSTAT_PARITY) | |
284 | flag = TTY_PARITY; | |
285 | else if (uerstat & (S3C2410_UERSTAT_FRAME | | |
286 | S3C2410_UERSTAT_OVERRUN)) | |
287 | flag = TTY_FRAME; | |
288 | } | |
289 | ||
290 | if (uart_handle_sysrq_char(port, ch)) | |
291 | goto ignore_char; | |
292 | ||
293 | uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, | |
294 | ch, flag); | |
295 | ||
296 | ignore_char: | |
297 | continue; | |
298 | } | |
299 | tty_flip_buffer_push(tty); | |
300 | ||
301 | out: | |
302 | return IRQ_HANDLED; | |
303 | } | |
304 | ||
305 | static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) | |
306 | { | |
307 | struct s3c24xx_uart_port *ourport = id; | |
308 | struct uart_port *port = &ourport->port; | |
ebd2c8f6 | 309 | struct circ_buf *xmit = &port->state->xmit; |
b497549a BD |
310 | int count = 256; |
311 | ||
312 | if (port->x_char) { | |
313 | wr_regb(port, S3C2410_UTXH, port->x_char); | |
314 | port->icount.tx++; | |
315 | port->x_char = 0; | |
316 | goto out; | |
317 | } | |
318 | ||
25985edc | 319 | /* if there isn't anything more to transmit, or the uart is now |
b497549a BD |
320 | * stopped, disable the uart and exit |
321 | */ | |
322 | ||
323 | if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { | |
324 | s3c24xx_serial_stop_tx(port); | |
325 | goto out; | |
326 | } | |
327 | ||
328 | /* try and drain the buffer... */ | |
329 | ||
330 | while (!uart_circ_empty(xmit) && count-- > 0) { | |
331 | if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull) | |
332 | break; | |
333 | ||
334 | wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]); | |
335 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
336 | port->icount.tx++; | |
337 | } | |
338 | ||
339 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
340 | uart_write_wakeup(port); | |
341 | ||
342 | if (uart_circ_empty(xmit)) | |
343 | s3c24xx_serial_stop_tx(port); | |
344 | ||
345 | out: | |
346 | return IRQ_HANDLED; | |
347 | } | |
348 | ||
88bb4ea1 TA |
349 | /* interrupt handler for s3c64xx and later SoC's.*/ |
350 | static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id) | |
351 | { | |
352 | struct s3c24xx_uart_port *ourport = id; | |
353 | struct uart_port *port = &ourport->port; | |
354 | unsigned int pend = rd_regl(port, S3C64XX_UINTP); | |
355 | unsigned long flags; | |
356 | irqreturn_t ret = IRQ_HANDLED; | |
357 | ||
358 | spin_lock_irqsave(&port->lock, flags); | |
359 | if (pend & S3C64XX_UINTM_RXD_MSK) { | |
360 | ret = s3c24xx_serial_rx_chars(irq, id); | |
361 | wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK); | |
362 | } | |
363 | if (pend & S3C64XX_UINTM_TXD_MSK) { | |
364 | ret = s3c24xx_serial_tx_chars(irq, id); | |
365 | wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK); | |
366 | } | |
367 | spin_unlock_irqrestore(&port->lock, flags); | |
368 | return ret; | |
369 | } | |
370 | ||
b497549a BD |
371 | static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) |
372 | { | |
373 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
374 | unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT); | |
375 | unsigned long ufcon = rd_regl(port, S3C2410_UFCON); | |
376 | ||
377 | if (ufcon & S3C2410_UFCON_FIFOMODE) { | |
378 | if ((ufstat & info->tx_fifomask) != 0 || | |
379 | (ufstat & info->tx_fifofull)) | |
380 | return 0; | |
381 | ||
382 | return 1; | |
383 | } | |
384 | ||
385 | return s3c24xx_serial_txempty_nofifo(port); | |
386 | } | |
387 | ||
388 | /* no modem control lines */ | |
389 | static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port) | |
390 | { | |
391 | unsigned int umstat = rd_regb(port, S3C2410_UMSTAT); | |
392 | ||
393 | if (umstat & S3C2410_UMSTAT_CTS) | |
394 | return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; | |
395 | else | |
396 | return TIOCM_CAR | TIOCM_DSR; | |
397 | } | |
398 | ||
399 | static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) | |
400 | { | |
401 | /* todo - possibly remove AFC and do manual CTS */ | |
402 | } | |
403 | ||
404 | static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) | |
405 | { | |
406 | unsigned long flags; | |
407 | unsigned int ucon; | |
408 | ||
409 | spin_lock_irqsave(&port->lock, flags); | |
410 | ||
411 | ucon = rd_regl(port, S3C2410_UCON); | |
412 | ||
413 | if (break_state) | |
414 | ucon |= S3C2410_UCON_SBREAK; | |
415 | else | |
416 | ucon &= ~S3C2410_UCON_SBREAK; | |
417 | ||
418 | wr_regl(port, S3C2410_UCON, ucon); | |
419 | ||
420 | spin_unlock_irqrestore(&port->lock, flags); | |
421 | } | |
422 | ||
423 | static void s3c24xx_serial_shutdown(struct uart_port *port) | |
424 | { | |
425 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
426 | ||
427 | if (ourport->tx_claimed) { | |
88bb4ea1 TA |
428 | if (!s3c24xx_serial_has_interrupt_mask(port)) |
429 | free_irq(ourport->tx_irq, ourport); | |
b497549a BD |
430 | tx_enabled(port) = 0; |
431 | ourport->tx_claimed = 0; | |
432 | } | |
433 | ||
434 | if (ourport->rx_claimed) { | |
88bb4ea1 TA |
435 | if (!s3c24xx_serial_has_interrupt_mask(port)) |
436 | free_irq(ourport->rx_irq, ourport); | |
b497549a BD |
437 | ourport->rx_claimed = 0; |
438 | rx_enabled(port) = 0; | |
439 | } | |
b497549a | 440 | |
88bb4ea1 TA |
441 | /* Clear pending interrupts and mask all interrupts */ |
442 | if (s3c24xx_serial_has_interrupt_mask(port)) { | |
443 | wr_regl(port, S3C64XX_UINTP, 0xf); | |
444 | wr_regl(port, S3C64XX_UINTM, 0xf); | |
445 | } | |
446 | } | |
b497549a BD |
447 | |
448 | static int s3c24xx_serial_startup(struct uart_port *port) | |
449 | { | |
450 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
451 | int ret; | |
452 | ||
453 | dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n", | |
454 | port->mapbase, port->membase); | |
455 | ||
456 | rx_enabled(port) = 1; | |
457 | ||
b73c289c | 458 | ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0, |
b497549a BD |
459 | s3c24xx_serial_portname(port), ourport); |
460 | ||
461 | if (ret != 0) { | |
d20925e1 | 462 | dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq); |
b497549a BD |
463 | return ret; |
464 | } | |
465 | ||
466 | ourport->rx_claimed = 1; | |
467 | ||
468 | dbg("requesting tx irq...\n"); | |
469 | ||
470 | tx_enabled(port) = 1; | |
471 | ||
b73c289c | 472 | ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0, |
b497549a BD |
473 | s3c24xx_serial_portname(port), ourport); |
474 | ||
475 | if (ret) { | |
d20925e1 | 476 | dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq); |
b497549a BD |
477 | goto err; |
478 | } | |
479 | ||
480 | ourport->tx_claimed = 1; | |
481 | ||
482 | dbg("s3c24xx_serial_startup ok\n"); | |
483 | ||
484 | /* the port reset code should have done the correct | |
485 | * register setup for the port controls */ | |
486 | ||
487 | return ret; | |
488 | ||
489 | err: | |
490 | s3c24xx_serial_shutdown(port); | |
491 | return ret; | |
492 | } | |
493 | ||
88bb4ea1 TA |
494 | static int s3c64xx_serial_startup(struct uart_port *port) |
495 | { | |
496 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
497 | int ret; | |
498 | ||
499 | dbg("s3c64xx_serial_startup: port=%p (%08lx,%p)\n", | |
500 | port->mapbase, port->membase); | |
501 | ||
502 | ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED, | |
503 | s3c24xx_serial_portname(port), ourport); | |
504 | if (ret) { | |
d20925e1 | 505 | dev_err(port->dev, "cannot get irq %d\n", port->irq); |
88bb4ea1 TA |
506 | return ret; |
507 | } | |
508 | ||
509 | /* For compatibility with s3c24xx Soc's */ | |
510 | rx_enabled(port) = 1; | |
511 | ourport->rx_claimed = 1; | |
512 | tx_enabled(port) = 0; | |
513 | ourport->tx_claimed = 1; | |
514 | ||
515 | /* Enable Rx Interrupt */ | |
516 | __clear_bit(S3C64XX_UINTM_RXD, portaddrl(port, S3C64XX_UINTM)); | |
517 | dbg("s3c64xx_serial_startup ok\n"); | |
518 | return ret; | |
519 | } | |
520 | ||
b497549a BD |
521 | /* power power management control */ |
522 | ||
523 | static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, | |
524 | unsigned int old) | |
525 | { | |
526 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
527 | ||
30555476 BD |
528 | ourport->pm_level = level; |
529 | ||
b497549a BD |
530 | switch (level) { |
531 | case 3: | |
7cd88831 | 532 | if (!IS_ERR(ourport->baudclk)) |
b497549a BD |
533 | clk_disable(ourport->baudclk); |
534 | ||
535 | clk_disable(ourport->clk); | |
536 | break; | |
537 | ||
538 | case 0: | |
539 | clk_enable(ourport->clk); | |
540 | ||
7cd88831 | 541 | if (!IS_ERR(ourport->baudclk)) |
b497549a BD |
542 | clk_enable(ourport->baudclk); |
543 | ||
544 | break; | |
545 | default: | |
d20925e1 | 546 | dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level); |
b497549a BD |
547 | } |
548 | } | |
549 | ||
550 | /* baud rate calculation | |
551 | * | |
552 | * The UARTs on the S3C2410/S3C2440 can take their clocks from a number | |
553 | * of different sources, including the peripheral clock ("pclk") and an | |
554 | * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk") | |
555 | * with a programmable extra divisor. | |
556 | * | |
557 | * The following code goes through the clock sources, and calculates the | |
558 | * baud clocks (and the resultant actual baud rates) and then tries to | |
559 | * pick the closest one and select that. | |
560 | * | |
561 | */ | |
562 | ||
5f5a7a55 | 563 | #define MAX_CLK_NAME_LENGTH 15 |
b497549a | 564 | |
5f5a7a55 | 565 | static inline int s3c24xx_serial_getsource(struct uart_port *port) |
b497549a BD |
566 | { |
567 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
5f5a7a55 | 568 | unsigned int ucon; |
b497549a | 569 | |
5f5a7a55 TA |
570 | if (info->num_clks == 1) |
571 | return 0; | |
b497549a | 572 | |
5f5a7a55 TA |
573 | ucon = rd_regl(port, S3C2410_UCON); |
574 | ucon &= info->clksel_mask; | |
575 | return ucon >> info->clksel_shift; | |
b497549a BD |
576 | } |
577 | ||
5f5a7a55 TA |
578 | static void s3c24xx_serial_setsource(struct uart_port *port, |
579 | unsigned int clk_sel) | |
b497549a | 580 | { |
5f5a7a55 TA |
581 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); |
582 | unsigned int ucon; | |
b497549a | 583 | |
5f5a7a55 TA |
584 | if (info->num_clks == 1) |
585 | return; | |
090f848d | 586 | |
5f5a7a55 TA |
587 | ucon = rd_regl(port, S3C2410_UCON); |
588 | if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel) | |
589 | return; | |
b497549a | 590 | |
5f5a7a55 TA |
591 | ucon &= ~info->clksel_mask; |
592 | ucon |= clk_sel << info->clksel_shift; | |
593 | wr_regl(port, S3C2410_UCON, ucon); | |
b497549a BD |
594 | } |
595 | ||
5f5a7a55 TA |
596 | static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport, |
597 | unsigned int req_baud, struct clk **best_clk, | |
598 | unsigned int *clk_num) | |
b497549a | 599 | { |
5f5a7a55 TA |
600 | struct s3c24xx_uart_info *info = ourport->info; |
601 | struct clk *clk; | |
602 | unsigned long rate; | |
603 | unsigned int cnt, baud, quot, clk_sel, best_quot = 0; | |
604 | char clkname[MAX_CLK_NAME_LENGTH]; | |
605 | int calc_deviation, deviation = (1 << 30) - 1; | |
606 | ||
5f5a7a55 TA |
607 | clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel : |
608 | ourport->info->def_clk_sel; | |
609 | for (cnt = 0; cnt < info->num_clks; cnt++) { | |
610 | if (!(clk_sel & (1 << cnt))) | |
611 | continue; | |
612 | ||
613 | sprintf(clkname, "clk_uart_baud%d", cnt); | |
614 | clk = clk_get(ourport->port.dev, clkname); | |
7cd88831 | 615 | if (IS_ERR(clk)) |
5f5a7a55 TA |
616 | continue; |
617 | ||
618 | rate = clk_get_rate(clk); | |
619 | if (!rate) | |
620 | continue; | |
621 | ||
622 | if (ourport->info->has_divslot) { | |
623 | unsigned long div = rate / req_baud; | |
624 | ||
625 | /* The UDIVSLOT register on the newer UARTs allows us to | |
626 | * get a divisor adjustment of 1/16th on the baud clock. | |
627 | * | |
628 | * We don't keep the UDIVSLOT value (the 16ths we | |
629 | * calculated by not multiplying the baud by 16) as it | |
630 | * is easy enough to recalculate. | |
631 | */ | |
632 | ||
633 | quot = div / 16; | |
634 | baud = rate / div; | |
635 | } else { | |
636 | quot = (rate + (8 * req_baud)) / (16 * req_baud); | |
637 | baud = rate / (quot * 16); | |
b497549a | 638 | } |
5f5a7a55 | 639 | quot--; |
b497549a | 640 | |
5f5a7a55 TA |
641 | calc_deviation = req_baud - baud; |
642 | if (calc_deviation < 0) | |
643 | calc_deviation = -calc_deviation; | |
b497549a | 644 | |
5f5a7a55 TA |
645 | if (calc_deviation < deviation) { |
646 | *best_clk = clk; | |
647 | best_quot = quot; | |
648 | *clk_num = cnt; | |
649 | deviation = calc_deviation; | |
b497549a BD |
650 | } |
651 | } | |
652 | ||
5f5a7a55 | 653 | return best_quot; |
b497549a BD |
654 | } |
655 | ||
090f848d BD |
656 | /* udivslot_table[] |
657 | * | |
658 | * This table takes the fractional value of the baud divisor and gives | |
659 | * the recommended setting for the UDIVSLOT register. | |
660 | */ | |
661 | static u16 udivslot_table[16] = { | |
662 | [0] = 0x0000, | |
663 | [1] = 0x0080, | |
664 | [2] = 0x0808, | |
665 | [3] = 0x0888, | |
666 | [4] = 0x2222, | |
667 | [5] = 0x4924, | |
668 | [6] = 0x4A52, | |
669 | [7] = 0x54AA, | |
670 | [8] = 0x5555, | |
671 | [9] = 0xD555, | |
672 | [10] = 0xD5D5, | |
673 | [11] = 0xDDD5, | |
674 | [12] = 0xDDDD, | |
675 | [13] = 0xDFDD, | |
676 | [14] = 0xDFDF, | |
677 | [15] = 0xFFDF, | |
678 | }; | |
679 | ||
b497549a BD |
680 | static void s3c24xx_serial_set_termios(struct uart_port *port, |
681 | struct ktermios *termios, | |
682 | struct ktermios *old) | |
683 | { | |
684 | struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); | |
685 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
7cd88831 | 686 | struct clk *clk = ERR_PTR(-EINVAL); |
b497549a | 687 | unsigned long flags; |
5f5a7a55 | 688 | unsigned int baud, quot, clk_sel = 0; |
b497549a BD |
689 | unsigned int ulcon; |
690 | unsigned int umcon; | |
090f848d | 691 | unsigned int udivslot = 0; |
b497549a BD |
692 | |
693 | /* | |
694 | * We don't support modem control lines. | |
695 | */ | |
696 | termios->c_cflag &= ~(HUPCL | CMSPAR); | |
697 | termios->c_cflag |= CLOCAL; | |
698 | ||
699 | /* | |
700 | * Ask the core to calculate the divisor for us. | |
701 | */ | |
702 | ||
703 | baud = uart_get_baud_rate(port, termios, old, 0, 115200*8); | |
5f5a7a55 | 704 | quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel); |
b497549a BD |
705 | if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) |
706 | quot = port->custom_divisor; | |
7cd88831 | 707 | if (IS_ERR(clk)) |
5f5a7a55 | 708 | return; |
b497549a BD |
709 | |
710 | /* check to see if we need to change clock source */ | |
711 | ||
5f5a7a55 TA |
712 | if (ourport->baudclk != clk) { |
713 | s3c24xx_serial_setsource(port, clk_sel); | |
b497549a | 714 | |
7cd88831 | 715 | if (!IS_ERR(ourport->baudclk)) { |
b497549a | 716 | clk_disable(ourport->baudclk); |
7cd88831 | 717 | ourport->baudclk = ERR_PTR(-EINVAL); |
b497549a BD |
718 | } |
719 | ||
720 | clk_enable(clk); | |
721 | ||
b497549a | 722 | ourport->baudclk = clk; |
30555476 | 723 | ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; |
b497549a BD |
724 | } |
725 | ||
090f848d BD |
726 | if (ourport->info->has_divslot) { |
727 | unsigned int div = ourport->baudclk_rate / baud; | |
728 | ||
8b526ae4 JL |
729 | if (cfg->has_fracval) { |
730 | udivslot = (div & 15); | |
731 | dbg("fracval = %04x\n", udivslot); | |
732 | } else { | |
733 | udivslot = udivslot_table[div & 15]; | |
734 | dbg("udivslot = %04x (div %d)\n", udivslot, div & 15); | |
735 | } | |
090f848d BD |
736 | } |
737 | ||
b497549a BD |
738 | switch (termios->c_cflag & CSIZE) { |
739 | case CS5: | |
740 | dbg("config: 5bits/char\n"); | |
741 | ulcon = S3C2410_LCON_CS5; | |
742 | break; | |
743 | case CS6: | |
744 | dbg("config: 6bits/char\n"); | |
745 | ulcon = S3C2410_LCON_CS6; | |
746 | break; | |
747 | case CS7: | |
748 | dbg("config: 7bits/char\n"); | |
749 | ulcon = S3C2410_LCON_CS7; | |
750 | break; | |
751 | case CS8: | |
752 | default: | |
753 | dbg("config: 8bits/char\n"); | |
754 | ulcon = S3C2410_LCON_CS8; | |
755 | break; | |
756 | } | |
757 | ||
758 | /* preserve original lcon IR settings */ | |
759 | ulcon |= (cfg->ulcon & S3C2410_LCON_IRM); | |
760 | ||
761 | if (termios->c_cflag & CSTOPB) | |
762 | ulcon |= S3C2410_LCON_STOPB; | |
763 | ||
764 | umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0; | |
765 | ||
766 | if (termios->c_cflag & PARENB) { | |
767 | if (termios->c_cflag & PARODD) | |
768 | ulcon |= S3C2410_LCON_PODD; | |
769 | else | |
770 | ulcon |= S3C2410_LCON_PEVEN; | |
771 | } else { | |
772 | ulcon |= S3C2410_LCON_PNONE; | |
773 | } | |
774 | ||
775 | spin_lock_irqsave(&port->lock, flags); | |
776 | ||
090f848d BD |
777 | dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n", |
778 | ulcon, quot, udivslot); | |
b497549a BD |
779 | |
780 | wr_regl(port, S3C2410_ULCON, ulcon); | |
781 | wr_regl(port, S3C2410_UBRDIV, quot); | |
782 | wr_regl(port, S3C2410_UMCON, umcon); | |
783 | ||
090f848d BD |
784 | if (ourport->info->has_divslot) |
785 | wr_regl(port, S3C2443_DIVSLOT, udivslot); | |
786 | ||
b497549a BD |
787 | dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", |
788 | rd_regl(port, S3C2410_ULCON), | |
789 | rd_regl(port, S3C2410_UCON), | |
790 | rd_regl(port, S3C2410_UFCON)); | |
791 | ||
792 | /* | |
793 | * Update the per-port timeout. | |
794 | */ | |
795 | uart_update_timeout(port, termios->c_cflag, baud); | |
796 | ||
797 | /* | |
798 | * Which character status flags are we interested in? | |
799 | */ | |
800 | port->read_status_mask = S3C2410_UERSTAT_OVERRUN; | |
801 | if (termios->c_iflag & INPCK) | |
802 | port->read_status_mask |= S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_PARITY; | |
803 | ||
804 | /* | |
805 | * Which character status flags should we ignore? | |
806 | */ | |
807 | port->ignore_status_mask = 0; | |
808 | if (termios->c_iflag & IGNPAR) | |
809 | port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN; | |
810 | if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) | |
811 | port->ignore_status_mask |= S3C2410_UERSTAT_FRAME; | |
812 | ||
813 | /* | |
814 | * Ignore all characters if CREAD is not set. | |
815 | */ | |
816 | if ((termios->c_cflag & CREAD) == 0) | |
817 | port->ignore_status_mask |= RXSTAT_DUMMY_READ; | |
818 | ||
819 | spin_unlock_irqrestore(&port->lock, flags); | |
820 | } | |
821 | ||
822 | static const char *s3c24xx_serial_type(struct uart_port *port) | |
823 | { | |
824 | switch (port->type) { | |
825 | case PORT_S3C2410: | |
826 | return "S3C2410"; | |
827 | case PORT_S3C2440: | |
828 | return "S3C2440"; | |
829 | case PORT_S3C2412: | |
830 | return "S3C2412"; | |
b690ace5 BD |
831 | case PORT_S3C6400: |
832 | return "S3C6400/10"; | |
b497549a BD |
833 | default: |
834 | return NULL; | |
835 | } | |
836 | } | |
837 | ||
838 | #define MAP_SIZE (0x100) | |
839 | ||
840 | static void s3c24xx_serial_release_port(struct uart_port *port) | |
841 | { | |
842 | release_mem_region(port->mapbase, MAP_SIZE); | |
843 | } | |
844 | ||
845 | static int s3c24xx_serial_request_port(struct uart_port *port) | |
846 | { | |
847 | const char *name = s3c24xx_serial_portname(port); | |
848 | return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY; | |
849 | } | |
850 | ||
851 | static void s3c24xx_serial_config_port(struct uart_port *port, int flags) | |
852 | { | |
853 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
854 | ||
855 | if (flags & UART_CONFIG_TYPE && | |
856 | s3c24xx_serial_request_port(port) == 0) | |
857 | port->type = info->type; | |
858 | } | |
859 | ||
860 | /* | |
861 | * verify the new serial_struct (for TIOCSSERIAL). | |
862 | */ | |
863 | static int | |
864 | s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser) | |
865 | { | |
866 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
867 | ||
868 | if (ser->type != PORT_UNKNOWN && ser->type != info->type) | |
869 | return -EINVAL; | |
870 | ||
871 | return 0; | |
872 | } | |
873 | ||
874 | ||
875 | #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE | |
876 | ||
877 | static struct console s3c24xx_serial_console; | |
878 | ||
879 | #define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console | |
880 | #else | |
881 | #define S3C24XX_SERIAL_CONSOLE NULL | |
882 | #endif | |
883 | ||
884 | static struct uart_ops s3c24xx_serial_ops = { | |
885 | .pm = s3c24xx_serial_pm, | |
886 | .tx_empty = s3c24xx_serial_tx_empty, | |
887 | .get_mctrl = s3c24xx_serial_get_mctrl, | |
888 | .set_mctrl = s3c24xx_serial_set_mctrl, | |
889 | .stop_tx = s3c24xx_serial_stop_tx, | |
890 | .start_tx = s3c24xx_serial_start_tx, | |
891 | .stop_rx = s3c24xx_serial_stop_rx, | |
892 | .enable_ms = s3c24xx_serial_enable_ms, | |
893 | .break_ctl = s3c24xx_serial_break_ctl, | |
894 | .startup = s3c24xx_serial_startup, | |
895 | .shutdown = s3c24xx_serial_shutdown, | |
896 | .set_termios = s3c24xx_serial_set_termios, | |
897 | .type = s3c24xx_serial_type, | |
898 | .release_port = s3c24xx_serial_release_port, | |
899 | .request_port = s3c24xx_serial_request_port, | |
900 | .config_port = s3c24xx_serial_config_port, | |
901 | .verify_port = s3c24xx_serial_verify_port, | |
902 | }; | |
903 | ||
b497549a BD |
904 | static struct uart_driver s3c24xx_uart_drv = { |
905 | .owner = THIS_MODULE, | |
2cf0c58e | 906 | .driver_name = "s3c2410_serial", |
bdd4915a | 907 | .nr = CONFIG_SERIAL_SAMSUNG_UARTS, |
b497549a | 908 | .cons = S3C24XX_SERIAL_CONSOLE, |
2cf0c58e | 909 | .dev_name = S3C24XX_SERIAL_NAME, |
b497549a BD |
910 | .major = S3C24XX_SERIAL_MAJOR, |
911 | .minor = S3C24XX_SERIAL_MINOR, | |
912 | }; | |
913 | ||
03d5e77b | 914 | static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = { |
b497549a BD |
915 | [0] = { |
916 | .port = { | |
917 | .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock), | |
918 | .iotype = UPIO_MEM, | |
b497549a BD |
919 | .uartclk = 0, |
920 | .fifosize = 16, | |
921 | .ops = &s3c24xx_serial_ops, | |
922 | .flags = UPF_BOOT_AUTOCONF, | |
923 | .line = 0, | |
924 | } | |
925 | }, | |
926 | [1] = { | |
927 | .port = { | |
928 | .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock), | |
929 | .iotype = UPIO_MEM, | |
b497549a BD |
930 | .uartclk = 0, |
931 | .fifosize = 16, | |
932 | .ops = &s3c24xx_serial_ops, | |
933 | .flags = UPF_BOOT_AUTOCONF, | |
934 | .line = 1, | |
935 | } | |
936 | }, | |
03d5e77b | 937 | #if CONFIG_SERIAL_SAMSUNG_UARTS > 2 |
b497549a BD |
938 | |
939 | [2] = { | |
940 | .port = { | |
941 | .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock), | |
942 | .iotype = UPIO_MEM, | |
b497549a BD |
943 | .uartclk = 0, |
944 | .fifosize = 16, | |
945 | .ops = &s3c24xx_serial_ops, | |
946 | .flags = UPF_BOOT_AUTOCONF, | |
947 | .line = 2, | |
948 | } | |
03d5e77b BD |
949 | }, |
950 | #endif | |
951 | #if CONFIG_SERIAL_SAMSUNG_UARTS > 3 | |
952 | [3] = { | |
953 | .port = { | |
954 | .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock), | |
955 | .iotype = UPIO_MEM, | |
03d5e77b BD |
956 | .uartclk = 0, |
957 | .fifosize = 16, | |
958 | .ops = &s3c24xx_serial_ops, | |
959 | .flags = UPF_BOOT_AUTOCONF, | |
960 | .line = 3, | |
961 | } | |
b497549a BD |
962 | } |
963 | #endif | |
964 | }; | |
965 | ||
966 | /* s3c24xx_serial_resetport | |
967 | * | |
0dfb3b41 | 968 | * reset the fifos and other the settings. |
b497549a BD |
969 | */ |
970 | ||
0dfb3b41 TA |
971 | static void s3c24xx_serial_resetport(struct uart_port *port, |
972 | struct s3c2410_uartcfg *cfg) | |
b497549a BD |
973 | { |
974 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
0dfb3b41 TA |
975 | unsigned long ucon = rd_regl(port, S3C2410_UCON); |
976 | unsigned int ucon_mask; | |
b497549a | 977 | |
0dfb3b41 TA |
978 | ucon_mask = info->clksel_mask; |
979 | if (info->type == PORT_S3C2440) | |
980 | ucon_mask |= S3C2440_UCON0_DIVMASK; | |
981 | ||
982 | ucon &= ucon_mask; | |
983 | wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); | |
7b246a1d | 984 | wr_regl(port, S3C2410_ULCON, cfg->ulcon); |
0dfb3b41 TA |
985 | |
986 | /* reset both fifos */ | |
987 | wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); | |
988 | wr_regl(port, S3C2410_UFCON, cfg->ufcon); | |
989 | ||
990 | /* some delay is required after fifo reset */ | |
991 | udelay(1); | |
b497549a BD |
992 | } |
993 | ||
30555476 BD |
994 | |
995 | #ifdef CONFIG_CPU_FREQ | |
996 | ||
997 | static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb, | |
998 | unsigned long val, void *data) | |
999 | { | |
1000 | struct s3c24xx_uart_port *port; | |
1001 | struct uart_port *uport; | |
1002 | ||
1003 | port = container_of(nb, struct s3c24xx_uart_port, freq_transition); | |
1004 | uport = &port->port; | |
1005 | ||
1006 | /* check to see if port is enabled */ | |
1007 | ||
1008 | if (port->pm_level != 0) | |
1009 | return 0; | |
1010 | ||
1011 | /* try and work out if the baudrate is changing, we can detect | |
1012 | * a change in rate, but we do not have support for detecting | |
1013 | * a disturbance in the clock-rate over the change. | |
1014 | */ | |
1015 | ||
25f04ad4 | 1016 | if (IS_ERR(port->baudclk)) |
30555476 BD |
1017 | goto exit; |
1018 | ||
25f04ad4 | 1019 | if (port->baudclk_rate == clk_get_rate(port->baudclk)) |
30555476 BD |
1020 | goto exit; |
1021 | ||
1022 | if (val == CPUFREQ_PRECHANGE) { | |
1023 | /* we should really shut the port down whilst the | |
1024 | * frequency change is in progress. */ | |
1025 | ||
1026 | } else if (val == CPUFREQ_POSTCHANGE) { | |
1027 | struct ktermios *termios; | |
1028 | struct tty_struct *tty; | |
1029 | ||
ebd2c8f6 | 1030 | if (uport->state == NULL) |
30555476 | 1031 | goto exit; |
30555476 | 1032 | |
ebd2c8f6 | 1033 | tty = uport->state->port.tty; |
30555476 | 1034 | |
7de40c21 | 1035 | if (tty == NULL) |
30555476 | 1036 | goto exit; |
30555476 | 1037 | |
adc8d746 | 1038 | termios = &tty->termios; |
30555476 BD |
1039 | |
1040 | if (termios == NULL) { | |
d20925e1 | 1041 | dev_warn(uport->dev, "%s: no termios?\n", __func__); |
30555476 BD |
1042 | goto exit; |
1043 | } | |
1044 | ||
1045 | s3c24xx_serial_set_termios(uport, termios, NULL); | |
1046 | } | |
1047 | ||
1048 | exit: | |
1049 | return 0; | |
1050 | } | |
1051 | ||
1052 | static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) | |
1053 | { | |
1054 | port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition; | |
1055 | ||
1056 | return cpufreq_register_notifier(&port->freq_transition, | |
1057 | CPUFREQ_TRANSITION_NOTIFIER); | |
1058 | } | |
1059 | ||
1060 | static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) | |
1061 | { | |
1062 | cpufreq_unregister_notifier(&port->freq_transition, | |
1063 | CPUFREQ_TRANSITION_NOTIFIER); | |
1064 | } | |
1065 | ||
1066 | #else | |
1067 | static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) | |
1068 | { | |
1069 | return 0; | |
1070 | } | |
1071 | ||
1072 | static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) | |
1073 | { | |
1074 | } | |
1075 | #endif | |
1076 | ||
b497549a BD |
1077 | /* s3c24xx_serial_init_port |
1078 | * | |
1079 | * initialise a single serial port from the platform device given | |
1080 | */ | |
1081 | ||
1082 | static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, | |
b497549a BD |
1083 | struct platform_device *platdev) |
1084 | { | |
1085 | struct uart_port *port = &ourport->port; | |
da121506 | 1086 | struct s3c2410_uartcfg *cfg = ourport->cfg; |
b497549a BD |
1087 | struct resource *res; |
1088 | int ret; | |
1089 | ||
1090 | dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev); | |
1091 | ||
1092 | if (platdev == NULL) | |
1093 | return -ENODEV; | |
1094 | ||
b497549a BD |
1095 | if (port->mapbase != 0) |
1096 | return 0; | |
1097 | ||
b497549a BD |
1098 | /* setup info for port */ |
1099 | port->dev = &platdev->dev; | |
b497549a | 1100 | |
88bb4ea1 TA |
1101 | /* Startup sequence is different for s3c64xx and higher SoC's */ |
1102 | if (s3c24xx_serial_has_interrupt_mask(port)) | |
1103 | s3c24xx_serial_ops.startup = s3c64xx_serial_startup; | |
1104 | ||
b497549a BD |
1105 | port->uartclk = 1; |
1106 | ||
1107 | if (cfg->uart_flags & UPF_CONS_FLOW) { | |
1108 | dbg("s3c24xx_serial_init_port: enabling flow control\n"); | |
1109 | port->flags |= UPF_CONS_FLOW; | |
1110 | } | |
1111 | ||
1112 | /* sort our the physical and virtual addresses for each UART */ | |
1113 | ||
1114 | res = platform_get_resource(platdev, IORESOURCE_MEM, 0); | |
1115 | if (res == NULL) { | |
d20925e1 | 1116 | dev_err(port->dev, "failed to find memory resource for uart\n"); |
b497549a BD |
1117 | return -EINVAL; |
1118 | } | |
1119 | ||
1120 | dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); | |
1121 | ||
b690ace5 | 1122 | port->mapbase = res->start; |
2555e663 | 1123 | port->membase = S3C_VA_UART + (res->start & 0xfffff); |
b497549a BD |
1124 | ret = platform_get_irq(platdev, 0); |
1125 | if (ret < 0) | |
1126 | port->irq = 0; | |
b73c289c | 1127 | else { |
b497549a | 1128 | port->irq = ret; |
b73c289c BD |
1129 | ourport->rx_irq = ret; |
1130 | ourport->tx_irq = ret + 1; | |
1131 | } | |
9303ac15 | 1132 | |
b73c289c BD |
1133 | ret = platform_get_irq(platdev, 1); |
1134 | if (ret > 0) | |
1135 | ourport->tx_irq = ret; | |
b497549a BD |
1136 | |
1137 | ourport->clk = clk_get(&platdev->dev, "uart"); | |
1138 | ||
88bb4ea1 TA |
1139 | /* Keep all interrupts masked and cleared */ |
1140 | if (s3c24xx_serial_has_interrupt_mask(port)) { | |
1141 | wr_regl(port, S3C64XX_UINTM, 0xf); | |
1142 | wr_regl(port, S3C64XX_UINTP, 0xf); | |
1143 | wr_regl(port, S3C64XX_UINTSP, 0xf); | |
1144 | } | |
1145 | ||
b73c289c BD |
1146 | dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n", |
1147 | port->mapbase, port->membase, port->irq, | |
1148 | ourport->rx_irq, ourport->tx_irq, port->uartclk); | |
b497549a BD |
1149 | |
1150 | /* reset the fifos (and setup the uart) */ | |
1151 | s3c24xx_serial_resetport(port, cfg); | |
1152 | return 0; | |
1153 | } | |
1154 | ||
1155 | static ssize_t s3c24xx_serial_show_clksrc(struct device *dev, | |
1156 | struct device_attribute *attr, | |
1157 | char *buf) | |
1158 | { | |
1159 | struct uart_port *port = s3c24xx_dev_to_port(dev); | |
1160 | struct s3c24xx_uart_port *ourport = to_ourport(port); | |
1161 | ||
7cd88831 KK |
1162 | if (IS_ERR(ourport->baudclk)) |
1163 | return -EINVAL; | |
1164 | ||
7b15e1d9 KP |
1165 | return snprintf(buf, PAGE_SIZE, "* %s\n", |
1166 | ourport->baudclk->name ?: "(null)"); | |
b497549a BD |
1167 | } |
1168 | ||
1169 | static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL); | |
1170 | ||
26c919e1 | 1171 | |
b497549a BD |
1172 | /* Device driver serial port probe */ |
1173 | ||
26c919e1 | 1174 | static const struct of_device_id s3c24xx_uart_dt_match[]; |
b497549a BD |
1175 | static int probe_index; |
1176 | ||
26c919e1 TA |
1177 | static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data( |
1178 | struct platform_device *pdev) | |
1179 | { | |
1180 | #ifdef CONFIG_OF | |
1181 | if (pdev->dev.of_node) { | |
1182 | const struct of_device_id *match; | |
1183 | match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node); | |
1184 | return (struct s3c24xx_serial_drv_data *)match->data; | |
1185 | } | |
1186 | #endif | |
1187 | return (struct s3c24xx_serial_drv_data *) | |
1188 | platform_get_device_id(pdev)->driver_data; | |
1189 | } | |
1190 | ||
da121506 | 1191 | static int s3c24xx_serial_probe(struct platform_device *pdev) |
b497549a BD |
1192 | { |
1193 | struct s3c24xx_uart_port *ourport; | |
1194 | int ret; | |
1195 | ||
da121506 | 1196 | dbg("s3c24xx_serial_probe(%p) %d\n", pdev, probe_index); |
b497549a BD |
1197 | |
1198 | ourport = &s3c24xx_serial_ports[probe_index]; | |
da121506 | 1199 | |
26c919e1 TA |
1200 | ourport->drv_data = s3c24xx_get_driver_data(pdev); |
1201 | if (!ourport->drv_data) { | |
1202 | dev_err(&pdev->dev, "could not find driver data\n"); | |
1203 | return -ENODEV; | |
1204 | } | |
da121506 | 1205 | |
7cd88831 | 1206 | ourport->baudclk = ERR_PTR(-EINVAL); |
da121506 TA |
1207 | ourport->info = ourport->drv_data->info; |
1208 | ourport->cfg = (pdev->dev.platform_data) ? | |
1209 | (struct s3c2410_uartcfg *)pdev->dev.platform_data : | |
1210 | ourport->drv_data->def_cfg; | |
1211 | ||
1212 | ourport->port.fifosize = (ourport->info->fifosize) ? | |
1213 | ourport->info->fifosize : | |
1214 | ourport->drv_data->fifosize[probe_index]; | |
1215 | ||
b497549a BD |
1216 | probe_index++; |
1217 | ||
1218 | dbg("%s: initialising port %p...\n", __func__, ourport); | |
1219 | ||
da121506 | 1220 | ret = s3c24xx_serial_init_port(ourport, pdev); |
b497549a BD |
1221 | if (ret < 0) |
1222 | goto probe_err; | |
1223 | ||
1224 | dbg("%s: adding port\n", __func__); | |
1225 | uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); | |
da121506 | 1226 | platform_set_drvdata(pdev, &ourport->port); |
b497549a | 1227 | |
da121506 | 1228 | ret = device_create_file(&pdev->dev, &dev_attr_clock_source); |
b497549a | 1229 | if (ret < 0) |
da121506 | 1230 | dev_err(&pdev->dev, "failed to add clock source attr.\n"); |
b497549a | 1231 | |
30555476 BD |
1232 | ret = s3c24xx_serial_cpufreq_register(ourport); |
1233 | if (ret < 0) | |
da121506 | 1234 | dev_err(&pdev->dev, "failed to add cpufreq notifier\n"); |
30555476 | 1235 | |
b497549a BD |
1236 | return 0; |
1237 | ||
1238 | probe_err: | |
1239 | return ret; | |
1240 | } | |
1241 | ||
da121506 | 1242 | static int __devexit s3c24xx_serial_remove(struct platform_device *dev) |
b497549a BD |
1243 | { |
1244 | struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); | |
1245 | ||
1246 | if (port) { | |
30555476 | 1247 | s3c24xx_serial_cpufreq_deregister(to_ourport(port)); |
b497549a BD |
1248 | device_remove_file(&dev->dev, &dev_attr_clock_source); |
1249 | uart_remove_one_port(&s3c24xx_uart_drv, port); | |
1250 | } | |
1251 | ||
1252 | return 0; | |
1253 | } | |
1254 | ||
b497549a | 1255 | /* UART power management code */ |
aef7fe52 MH |
1256 | #ifdef CONFIG_PM_SLEEP |
1257 | static int s3c24xx_serial_suspend(struct device *dev) | |
b497549a | 1258 | { |
aef7fe52 | 1259 | struct uart_port *port = s3c24xx_dev_to_port(dev); |
b497549a BD |
1260 | |
1261 | if (port) | |
1262 | uart_suspend_port(&s3c24xx_uart_drv, port); | |
1263 | ||
1264 | return 0; | |
1265 | } | |
1266 | ||
aef7fe52 | 1267 | static int s3c24xx_serial_resume(struct device *dev) |
b497549a | 1268 | { |
aef7fe52 | 1269 | struct uart_port *port = s3c24xx_dev_to_port(dev); |
b497549a BD |
1270 | struct s3c24xx_uart_port *ourport = to_ourport(port); |
1271 | ||
1272 | if (port) { | |
1273 | clk_enable(ourport->clk); | |
1274 | s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port)); | |
1275 | clk_disable(ourport->clk); | |
1276 | ||
1277 | uart_resume_port(&s3c24xx_uart_drv, port); | |
1278 | } | |
1279 | ||
1280 | return 0; | |
1281 | } | |
aef7fe52 MH |
1282 | |
1283 | static const struct dev_pm_ops s3c24xx_serial_pm_ops = { | |
1284 | .suspend = s3c24xx_serial_suspend, | |
1285 | .resume = s3c24xx_serial_resume, | |
1286 | }; | |
b882fc1b KK |
1287 | #define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops) |
1288 | ||
aef7fe52 | 1289 | #else /* !CONFIG_PM_SLEEP */ |
b882fc1b KK |
1290 | |
1291 | #define SERIAL_SAMSUNG_PM_OPS NULL | |
aef7fe52 | 1292 | #endif /* CONFIG_PM_SLEEP */ |
b497549a | 1293 | |
b497549a BD |
1294 | /* Console code */ |
1295 | ||
1296 | #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE | |
1297 | ||
1298 | static struct uart_port *cons_uart; | |
1299 | ||
1300 | static int | |
1301 | s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) | |
1302 | { | |
1303 | struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); | |
1304 | unsigned long ufstat, utrstat; | |
1305 | ||
1306 | if (ufcon & S3C2410_UFCON_FIFOMODE) { | |
9ddc5b6f | 1307 | /* fifo mode - check amount of data in fifo registers... */ |
b497549a BD |
1308 | |
1309 | ufstat = rd_regl(port, S3C2410_UFSTAT); | |
1310 | return (ufstat & info->tx_fifofull) ? 0 : 1; | |
1311 | } | |
1312 | ||
1313 | /* in non-fifo mode, we go and use the tx buffer empty */ | |
1314 | ||
1315 | utrstat = rd_regl(port, S3C2410_UTRSTAT); | |
1316 | return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0; | |
1317 | } | |
1318 | ||
1319 | static void | |
1320 | s3c24xx_serial_console_putchar(struct uart_port *port, int ch) | |
1321 | { | |
1322 | unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON); | |
1323 | while (!s3c24xx_serial_console_txrdy(port, ufcon)) | |
1324 | barrier(); | |
1325 | wr_regb(cons_uart, S3C2410_UTXH, ch); | |
1326 | } | |
1327 | ||
1328 | static void | |
1329 | s3c24xx_serial_console_write(struct console *co, const char *s, | |
1330 | unsigned int count) | |
1331 | { | |
1332 | uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar); | |
1333 | } | |
1334 | ||
1335 | static void __init | |
1336 | s3c24xx_serial_get_options(struct uart_port *port, int *baud, | |
1337 | int *parity, int *bits) | |
1338 | { | |
b497549a BD |
1339 | struct clk *clk; |
1340 | unsigned int ulcon; | |
1341 | unsigned int ucon; | |
1342 | unsigned int ubrdiv; | |
1343 | unsigned long rate; | |
5f5a7a55 TA |
1344 | unsigned int clk_sel; |
1345 | char clk_name[MAX_CLK_NAME_LENGTH]; | |
b497549a BD |
1346 | |
1347 | ulcon = rd_regl(port, S3C2410_ULCON); | |
1348 | ucon = rd_regl(port, S3C2410_UCON); | |
1349 | ubrdiv = rd_regl(port, S3C2410_UBRDIV); | |
1350 | ||
1351 | dbg("s3c24xx_serial_get_options: port=%p\n" | |
1352 | "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n", | |
1353 | port, ulcon, ucon, ubrdiv); | |
1354 | ||
1355 | if ((ucon & 0xf) != 0) { | |
1356 | /* consider the serial port configured if the tx/rx mode set */ | |
1357 | ||
1358 | switch (ulcon & S3C2410_LCON_CSMASK) { | |
1359 | case S3C2410_LCON_CS5: | |
1360 | *bits = 5; | |
1361 | break; | |
1362 | case S3C2410_LCON_CS6: | |
1363 | *bits = 6; | |
1364 | break; | |
1365 | case S3C2410_LCON_CS7: | |
1366 | *bits = 7; | |
1367 | break; | |
1368 | default: | |
1369 | case S3C2410_LCON_CS8: | |
1370 | *bits = 8; | |
1371 | break; | |
1372 | } | |
1373 | ||
1374 | switch (ulcon & S3C2410_LCON_PMASK) { | |
1375 | case S3C2410_LCON_PEVEN: | |
1376 | *parity = 'e'; | |
1377 | break; | |
1378 | ||
1379 | case S3C2410_LCON_PODD: | |
1380 | *parity = 'o'; | |
1381 | break; | |
1382 | ||
1383 | case S3C2410_LCON_PNONE: | |
1384 | default: | |
1385 | *parity = 'n'; | |
1386 | } | |
1387 | ||
1388 | /* now calculate the baud rate */ | |
1389 | ||
5f5a7a55 TA |
1390 | clk_sel = s3c24xx_serial_getsource(port); |
1391 | sprintf(clk_name, "clk_uart_baud%d", clk_sel); | |
b497549a | 1392 | |
5f5a7a55 | 1393 | clk = clk_get(port->dev, clk_name); |
7cd88831 | 1394 | if (!IS_ERR(clk)) |
5f5a7a55 | 1395 | rate = clk_get_rate(clk); |
b497549a BD |
1396 | else |
1397 | rate = 1; | |
1398 | ||
b497549a BD |
1399 | *baud = rate / (16 * (ubrdiv + 1)); |
1400 | dbg("calculated baud %d\n", *baud); | |
1401 | } | |
1402 | ||
1403 | } | |
1404 | ||
b497549a BD |
1405 | static int __init |
1406 | s3c24xx_serial_console_setup(struct console *co, char *options) | |
1407 | { | |
1408 | struct uart_port *port; | |
1409 | int baud = 9600; | |
1410 | int bits = 8; | |
1411 | int parity = 'n'; | |
1412 | int flow = 'n'; | |
1413 | ||
1414 | dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n", | |
1415 | co, co->index, options); | |
1416 | ||
1417 | /* is this a valid port */ | |
1418 | ||
03d5e77b | 1419 | if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS) |
b497549a BD |
1420 | co->index = 0; |
1421 | ||
1422 | port = &s3c24xx_serial_ports[co->index].port; | |
1423 | ||
1424 | /* is the port configured? */ | |
1425 | ||
ee430f16 TA |
1426 | if (port->mapbase == 0x0) |
1427 | return -ENODEV; | |
b497549a BD |
1428 | |
1429 | cons_uart = port; | |
1430 | ||
1431 | dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index); | |
1432 | ||
1433 | /* | |
1434 | * Check whether an invalid uart number has been specified, and | |
1435 | * if so, search for the first available port that does have | |
1436 | * console support. | |
1437 | */ | |
1438 | if (options) | |
1439 | uart_parse_options(options, &baud, &parity, &bits, &flow); | |
1440 | else | |
1441 | s3c24xx_serial_get_options(port, &baud, &parity, &bits); | |
1442 | ||
1443 | dbg("s3c24xx_serial_console_setup: baud %d\n", baud); | |
1444 | ||
1445 | return uart_set_options(port, co, baud, parity, bits, flow); | |
1446 | } | |
1447 | ||
b497549a BD |
1448 | static struct console s3c24xx_serial_console = { |
1449 | .name = S3C24XX_SERIAL_NAME, | |
1450 | .device = uart_console_device, | |
1451 | .flags = CON_PRINTBUFFER, | |
1452 | .index = -1, | |
1453 | .write = s3c24xx_serial_console_write, | |
5822a5df TA |
1454 | .setup = s3c24xx_serial_console_setup, |
1455 | .data = &s3c24xx_uart_drv, | |
b497549a | 1456 | }; |
da121506 TA |
1457 | #endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ |
1458 | ||
1459 | #ifdef CONFIG_CPU_S3C2410 | |
1460 | static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = { | |
1461 | .info = &(struct s3c24xx_uart_info) { | |
1462 | .name = "Samsung S3C2410 UART", | |
1463 | .type = PORT_S3C2410, | |
1464 | .fifosize = 16, | |
1465 | .rx_fifomask = S3C2410_UFSTAT_RXMASK, | |
1466 | .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, | |
1467 | .rx_fifofull = S3C2410_UFSTAT_RXFULL, | |
1468 | .tx_fifofull = S3C2410_UFSTAT_TXFULL, | |
1469 | .tx_fifomask = S3C2410_UFSTAT_TXMASK, | |
1470 | .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, | |
1471 | .def_clk_sel = S3C2410_UCON_CLKSEL0, | |
1472 | .num_clks = 2, | |
1473 | .clksel_mask = S3C2410_UCON_CLKMASK, | |
1474 | .clksel_shift = S3C2410_UCON_CLKSHIFT, | |
1475 | }, | |
1476 | .def_cfg = &(struct s3c2410_uartcfg) { | |
1477 | .ucon = S3C2410_UCON_DEFAULT, | |
1478 | .ufcon = S3C2410_UFCON_DEFAULT, | |
1479 | }, | |
1480 | }; | |
1481 | #define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data) | |
1482 | #else | |
1483 | #define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
1484 | #endif | |
b497549a | 1485 | |
da121506 TA |
1486 | #ifdef CONFIG_CPU_S3C2412 |
1487 | static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { | |
1488 | .info = &(struct s3c24xx_uart_info) { | |
1489 | .name = "Samsung S3C2412 UART", | |
1490 | .type = PORT_S3C2412, | |
1491 | .fifosize = 64, | |
1492 | .has_divslot = 1, | |
1493 | .rx_fifomask = S3C2440_UFSTAT_RXMASK, | |
1494 | .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, | |
1495 | .rx_fifofull = S3C2440_UFSTAT_RXFULL, | |
1496 | .tx_fifofull = S3C2440_UFSTAT_TXFULL, | |
1497 | .tx_fifomask = S3C2440_UFSTAT_TXMASK, | |
1498 | .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, | |
1499 | .def_clk_sel = S3C2410_UCON_CLKSEL2, | |
1500 | .num_clks = 4, | |
1501 | .clksel_mask = S3C2412_UCON_CLKMASK, | |
1502 | .clksel_shift = S3C2412_UCON_CLKSHIFT, | |
1503 | }, | |
1504 | .def_cfg = &(struct s3c2410_uartcfg) { | |
1505 | .ucon = S3C2410_UCON_DEFAULT, | |
1506 | .ufcon = S3C2410_UFCON_DEFAULT, | |
1507 | }, | |
1508 | }; | |
1509 | #define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data) | |
1510 | #else | |
1511 | #define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
1512 | #endif | |
b497549a | 1513 | |
da121506 | 1514 | #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \ |
b26469a8 | 1515 | defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442) |
da121506 TA |
1516 | static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { |
1517 | .info = &(struct s3c24xx_uart_info) { | |
1518 | .name = "Samsung S3C2440 UART", | |
1519 | .type = PORT_S3C2440, | |
1520 | .fifosize = 64, | |
1521 | .has_divslot = 1, | |
1522 | .rx_fifomask = S3C2440_UFSTAT_RXMASK, | |
1523 | .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, | |
1524 | .rx_fifofull = S3C2440_UFSTAT_RXFULL, | |
1525 | .tx_fifofull = S3C2440_UFSTAT_TXFULL, | |
1526 | .tx_fifomask = S3C2440_UFSTAT_TXMASK, | |
1527 | .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, | |
1528 | .def_clk_sel = S3C2410_UCON_CLKSEL2, | |
1529 | .num_clks = 4, | |
1530 | .clksel_mask = S3C2412_UCON_CLKMASK, | |
1531 | .clksel_shift = S3C2412_UCON_CLKSHIFT, | |
1532 | }, | |
1533 | .def_cfg = &(struct s3c2410_uartcfg) { | |
1534 | .ucon = S3C2410_UCON_DEFAULT, | |
1535 | .ufcon = S3C2410_UFCON_DEFAULT, | |
1536 | }, | |
1537 | }; | |
1538 | #define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data) | |
1539 | #else | |
1540 | #define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
1541 | #endif | |
b497549a | 1542 | |
da121506 TA |
1543 | #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) || \ |
1544 | defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450) || \ | |
1545 | defined(CONFIG_CPU_S5PC100) | |
1546 | static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { | |
1547 | .info = &(struct s3c24xx_uart_info) { | |
1548 | .name = "Samsung S3C6400 UART", | |
1549 | .type = PORT_S3C6400, | |
1550 | .fifosize = 64, | |
1551 | .has_divslot = 1, | |
1552 | .rx_fifomask = S3C2440_UFSTAT_RXMASK, | |
1553 | .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, | |
1554 | .rx_fifofull = S3C2440_UFSTAT_RXFULL, | |
1555 | .tx_fifofull = S3C2440_UFSTAT_TXFULL, | |
1556 | .tx_fifomask = S3C2440_UFSTAT_TXMASK, | |
1557 | .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, | |
1558 | .def_clk_sel = S3C2410_UCON_CLKSEL2, | |
1559 | .num_clks = 4, | |
1560 | .clksel_mask = S3C6400_UCON_CLKMASK, | |
1561 | .clksel_shift = S3C6400_UCON_CLKSHIFT, | |
1562 | }, | |
1563 | .def_cfg = &(struct s3c2410_uartcfg) { | |
1564 | .ucon = S3C2410_UCON_DEFAULT, | |
1565 | .ufcon = S3C2410_UFCON_DEFAULT, | |
1566 | }, | |
1567 | }; | |
1568 | #define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data) | |
1569 | #else | |
1570 | #define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
1571 | #endif | |
b497549a | 1572 | |
da121506 TA |
1573 | #ifdef CONFIG_CPU_S5PV210 |
1574 | static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { | |
1575 | .info = &(struct s3c24xx_uart_info) { | |
1576 | .name = "Samsung S5PV210 UART", | |
1577 | .type = PORT_S3C6400, | |
1578 | .has_divslot = 1, | |
1579 | .rx_fifomask = S5PV210_UFSTAT_RXMASK, | |
1580 | .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, | |
1581 | .rx_fifofull = S5PV210_UFSTAT_RXFULL, | |
1582 | .tx_fifofull = S5PV210_UFSTAT_TXFULL, | |
1583 | .tx_fifomask = S5PV210_UFSTAT_TXMASK, | |
1584 | .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, | |
1585 | .def_clk_sel = S3C2410_UCON_CLKSEL0, | |
1586 | .num_clks = 2, | |
1587 | .clksel_mask = S5PV210_UCON_CLKMASK, | |
1588 | .clksel_shift = S5PV210_UCON_CLKSHIFT, | |
1589 | }, | |
1590 | .def_cfg = &(struct s3c2410_uartcfg) { | |
1591 | .ucon = S5PV210_UCON_DEFAULT, | |
1592 | .ufcon = S5PV210_UFCON_DEFAULT, | |
1593 | }, | |
1594 | .fifosize = { 256, 64, 16, 16 }, | |
1595 | }; | |
1596 | #define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data) | |
1597 | #else | |
1598 | #define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
1599 | #endif | |
b497549a | 1600 | |
5f7b6d19 | 1601 | #if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212) || \ |
7ccfe015 | 1602 | defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) |
da121506 TA |
1603 | static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { |
1604 | .info = &(struct s3c24xx_uart_info) { | |
1605 | .name = "Samsung Exynos4 UART", | |
1606 | .type = PORT_S3C6400, | |
1607 | .has_divslot = 1, | |
1608 | .rx_fifomask = S5PV210_UFSTAT_RXMASK, | |
1609 | .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, | |
1610 | .rx_fifofull = S5PV210_UFSTAT_RXFULL, | |
1611 | .tx_fifofull = S5PV210_UFSTAT_TXFULL, | |
1612 | .tx_fifomask = S5PV210_UFSTAT_TXMASK, | |
1613 | .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, | |
1614 | .def_clk_sel = S3C2410_UCON_CLKSEL0, | |
1615 | .num_clks = 1, | |
1616 | .clksel_mask = 0, | |
1617 | .clksel_shift = 0, | |
1618 | }, | |
1619 | .def_cfg = &(struct s3c2410_uartcfg) { | |
1620 | .ucon = S5PV210_UCON_DEFAULT, | |
1621 | .ufcon = S5PV210_UFCON_DEFAULT, | |
1622 | .has_fracval = 1, | |
1623 | }, | |
1624 | .fifosize = { 256, 64, 16, 16 }, | |
1625 | }; | |
1626 | #define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data) | |
1627 | #else | |
1628 | #define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL | |
1629 | #endif | |
b497549a | 1630 | |
da121506 TA |
1631 | static struct platform_device_id s3c24xx_serial_driver_ids[] = { |
1632 | { | |
1633 | .name = "s3c2410-uart", | |
1634 | .driver_data = S3C2410_SERIAL_DRV_DATA, | |
1635 | }, { | |
1636 | .name = "s3c2412-uart", | |
1637 | .driver_data = S3C2412_SERIAL_DRV_DATA, | |
1638 | }, { | |
1639 | .name = "s3c2440-uart", | |
1640 | .driver_data = S3C2440_SERIAL_DRV_DATA, | |
1641 | }, { | |
1642 | .name = "s3c6400-uart", | |
1643 | .driver_data = S3C6400_SERIAL_DRV_DATA, | |
1644 | }, { | |
1645 | .name = "s5pv210-uart", | |
1646 | .driver_data = S5PV210_SERIAL_DRV_DATA, | |
1647 | }, { | |
1648 | .name = "exynos4210-uart", | |
1649 | .driver_data = EXYNOS4210_SERIAL_DRV_DATA, | |
1650 | }, | |
1651 | { }, | |
1652 | }; | |
1653 | MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids); | |
1654 | ||
26c919e1 TA |
1655 | #ifdef CONFIG_OF |
1656 | static const struct of_device_id s3c24xx_uart_dt_match[] = { | |
1657 | { .compatible = "samsung,exynos4210-uart", | |
a169a888 | 1658 | .data = (void *)EXYNOS4210_SERIAL_DRV_DATA }, |
26c919e1 TA |
1659 | {}, |
1660 | }; | |
1661 | MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); | |
1662 | #else | |
1663 | #define s3c24xx_uart_dt_match NULL | |
1664 | #endif | |
1665 | ||
da121506 TA |
1666 | static struct platform_driver samsung_serial_driver = { |
1667 | .probe = s3c24xx_serial_probe, | |
1668 | .remove = __devexit_p(s3c24xx_serial_remove), | |
1669 | .id_table = s3c24xx_serial_driver_ids, | |
1670 | .driver = { | |
1671 | .name = "samsung-uart", | |
1672 | .owner = THIS_MODULE, | |
1673 | .pm = SERIAL_SAMSUNG_PM_OPS, | |
26c919e1 | 1674 | .of_match_table = s3c24xx_uart_dt_match, |
da121506 TA |
1675 | }, |
1676 | }; | |
b497549a | 1677 | |
da121506 | 1678 | /* module initialisation code */ |
b497549a | 1679 | |
da121506 TA |
1680 | static int __init s3c24xx_serial_modinit(void) |
1681 | { | |
1682 | int ret; | |
1683 | ||
1684 | ret = uart_register_driver(&s3c24xx_uart_drv); | |
1685 | if (ret < 0) { | |
d20925e1 | 1686 | pr_err("Failed to register Samsung UART driver\n"); |
e740d8f1 | 1687 | return ret; |
da121506 TA |
1688 | } |
1689 | ||
1690 | return platform_driver_register(&samsung_serial_driver); | |
b497549a BD |
1691 | } |
1692 | ||
da121506 TA |
1693 | static void __exit s3c24xx_serial_modexit(void) |
1694 | { | |
1695 | uart_unregister_driver(&s3c24xx_uart_drv); | |
1696 | } | |
1697 | ||
1698 | module_init(s3c24xx_serial_modinit); | |
1699 | module_exit(s3c24xx_serial_modexit); | |
b497549a | 1700 | |
da121506 | 1701 | MODULE_ALIAS("platform:samsung-uart"); |
b497549a BD |
1702 | MODULE_DESCRIPTION("Samsung SoC Serial port driver"); |
1703 | MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); | |
1704 | MODULE_LICENSE("GPL v2"); |