Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
1da177e4 LT |
2 | * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) |
3 | * | |
f43dc23d | 4 | * Copyright (C) 2002 - 2011 Paul Mundt |
3ea6bc3d | 5 | * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007). |
1da177e4 LT |
6 | * |
7 | * based off of the old drivers/char/sh-sci.c by: | |
8 | * | |
9 | * Copyright (C) 1999, 2000 Niibe Yutaka | |
10 | * Copyright (C) 2000 Sugioka Toshinobu | |
11 | * Modified to support multiple serial ports. Stuart Menefy (May 2000). | |
12 | * Modified to support SecureEdge. David McCullough (2002) | |
13 | * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003). | |
d89ddd1c | 14 | * Removed SH7300 support (Jul 2007). |
1da177e4 LT |
15 | * |
16 | * This file is subject to the terms and conditions of the GNU General Public | |
17 | * License. See the file "COPYING" in the main directory of this archive | |
18 | * for more details. | |
19 | */ | |
0b3d4ef6 PM |
20 | #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) |
21 | #define SUPPORT_SYSRQ | |
22 | #endif | |
1da177e4 LT |
23 | |
24 | #undef DEBUG | |
25 | ||
1da177e4 LT |
26 | #include <linux/module.h> |
27 | #include <linux/errno.h> | |
1da177e4 LT |
28 | #include <linux/timer.h> |
29 | #include <linux/interrupt.h> | |
30 | #include <linux/tty.h> | |
31 | #include <linux/tty_flip.h> | |
32 | #include <linux/serial.h> | |
33 | #include <linux/major.h> | |
34 | #include <linux/string.h> | |
35 | #include <linux/sysrq.h> | |
1da177e4 LT |
36 | #include <linux/ioport.h> |
37 | #include <linux/mm.h> | |
1da177e4 LT |
38 | #include <linux/init.h> |
39 | #include <linux/delay.h> | |
40 | #include <linux/console.h> | |
e108b2ca | 41 | #include <linux/platform_device.h> |
96de1a8f | 42 | #include <linux/serial_sci.h> |
1da177e4 | 43 | #include <linux/notifier.h> |
5e50d2d6 | 44 | #include <linux/pm_runtime.h> |
1da177e4 | 45 | #include <linux/cpufreq.h> |
85f094ec | 46 | #include <linux/clk.h> |
fa5da2f7 | 47 | #include <linux/ctype.h> |
7ff731ae | 48 | #include <linux/err.h> |
73a19e4c | 49 | #include <linux/dmaengine.h> |
5beabc7f | 50 | #include <linux/dma-mapping.h> |
73a19e4c | 51 | #include <linux/scatterlist.h> |
5a0e3ad6 | 52 | #include <linux/slab.h> |
85f094ec PM |
53 | |
54 | #ifdef CONFIG_SUPERH | |
1da177e4 LT |
55 | #include <asm/sh_bios.h> |
56 | #endif | |
57 | ||
1da177e4 LT |
58 | #include "sh-sci.h" |
59 | ||
e108b2ca PM |
60 | struct sci_port { |
61 | struct uart_port port; | |
62 | ||
ce6738b6 PM |
63 | /* Platform configuration */ |
64 | struct plat_sci_port *cfg; | |
e108b2ca | 65 | |
e108b2ca PM |
66 | /* Break timer */ |
67 | struct timer_list break_timer; | |
68 | int break_flag; | |
1534a3b3 | 69 | |
501b825d MD |
70 | /* Interface clock */ |
71 | struct clk *iclk; | |
c7ed1ab3 PM |
72 | /* Function clock */ |
73 | struct clk *fclk; | |
edad1f20 | 74 | |
9174fc8f PM |
75 | char *irqstr[SCIx_NR_IRQS]; |
76 | ||
73a19e4c GL |
77 | struct dma_chan *chan_tx; |
78 | struct dma_chan *chan_rx; | |
f43dc23d | 79 | |
73a19e4c | 80 | #ifdef CONFIG_SERIAL_SH_SCI_DMA |
73a19e4c GL |
81 | struct dma_async_tx_descriptor *desc_tx; |
82 | struct dma_async_tx_descriptor *desc_rx[2]; | |
83 | dma_cookie_t cookie_tx; | |
84 | dma_cookie_t cookie_rx[2]; | |
85 | dma_cookie_t active_rx; | |
86 | struct scatterlist sg_tx; | |
87 | unsigned int sg_len_tx; | |
88 | struct scatterlist sg_rx[2]; | |
89 | size_t buf_len_rx; | |
90 | struct sh_dmae_slave param_tx; | |
91 | struct sh_dmae_slave param_rx; | |
92 | struct work_struct work_tx; | |
93 | struct work_struct work_rx; | |
94 | struct timer_list rx_timer; | |
3089f381 | 95 | unsigned int rx_timeout; |
73a19e4c | 96 | #endif |
e552de24 | 97 | |
d535a230 | 98 | struct notifier_block freq_transition; |
1ba76220 MD |
99 | |
100 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE | |
101 | unsigned short saved_smr; | |
102 | unsigned short saved_fcr; | |
103 | unsigned char saved_brr; | |
104 | #endif | |
e108b2ca PM |
105 | }; |
106 | ||
1da177e4 | 107 | /* Function prototypes */ |
d535a230 | 108 | static void sci_start_tx(struct uart_port *port); |
b129a8cc | 109 | static void sci_stop_tx(struct uart_port *port); |
d535a230 | 110 | static void sci_start_rx(struct uart_port *port); |
1da177e4 | 111 | |
e108b2ca | 112 | #define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS |
b7a76e4b | 113 | |
e108b2ca PM |
114 | static struct sci_port sci_ports[SCI_NPORTS]; |
115 | static struct uart_driver sci_uart_driver; | |
1da177e4 | 116 | |
e7c98dc7 MT |
117 | static inline struct sci_port * |
118 | to_sci_port(struct uart_port *uart) | |
119 | { | |
120 | return container_of(uart, struct sci_port, port); | |
121 | } | |
122 | ||
61a6976b PM |
123 | struct plat_sci_reg { |
124 | u8 offset, size; | |
125 | }; | |
126 | ||
127 | /* Helper for invalidating specific entries of an inherited map. */ | |
128 | #define sci_reg_invalid { .offset = 0, .size = 0 } | |
129 | ||
130 | static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { | |
131 | [SCIx_PROBE_REGTYPE] = { | |
132 | [0 ... SCIx_NR_REGS - 1] = sci_reg_invalid, | |
133 | }, | |
134 | ||
135 | /* | |
136 | * Common SCI definitions, dependent on the port's regshift | |
137 | * value. | |
138 | */ | |
139 | [SCIx_SCI_REGTYPE] = { | |
140 | [SCSMR] = { 0x00, 8 }, | |
141 | [SCBRR] = { 0x01, 8 }, | |
142 | [SCSCR] = { 0x02, 8 }, | |
143 | [SCxTDR] = { 0x03, 8 }, | |
144 | [SCxSR] = { 0x04, 8 }, | |
145 | [SCxRDR] = { 0x05, 8 }, | |
146 | [SCFCR] = sci_reg_invalid, | |
147 | [SCFDR] = sci_reg_invalid, | |
148 | [SCTFDR] = sci_reg_invalid, | |
149 | [SCRFDR] = sci_reg_invalid, | |
150 | [SCSPTR] = sci_reg_invalid, | |
151 | [SCLSR] = sci_reg_invalid, | |
152 | }, | |
153 | ||
154 | /* | |
155 | * Common definitions for legacy IrDA ports, dependent on | |
156 | * regshift value. | |
157 | */ | |
158 | [SCIx_IRDA_REGTYPE] = { | |
159 | [SCSMR] = { 0x00, 8 }, | |
160 | [SCBRR] = { 0x01, 8 }, | |
161 | [SCSCR] = { 0x02, 8 }, | |
162 | [SCxTDR] = { 0x03, 8 }, | |
163 | [SCxSR] = { 0x04, 8 }, | |
164 | [SCxRDR] = { 0x05, 8 }, | |
165 | [SCFCR] = { 0x06, 8 }, | |
166 | [SCFDR] = { 0x07, 16 }, | |
167 | [SCTFDR] = sci_reg_invalid, | |
168 | [SCRFDR] = sci_reg_invalid, | |
169 | [SCSPTR] = sci_reg_invalid, | |
170 | [SCLSR] = sci_reg_invalid, | |
171 | }, | |
172 | ||
173 | /* | |
174 | * Common SCIFA definitions. | |
175 | */ | |
176 | [SCIx_SCIFA_REGTYPE] = { | |
177 | [SCSMR] = { 0x00, 16 }, | |
178 | [SCBRR] = { 0x04, 8 }, | |
179 | [SCSCR] = { 0x08, 16 }, | |
180 | [SCxTDR] = { 0x20, 8 }, | |
181 | [SCxSR] = { 0x14, 16 }, | |
182 | [SCxRDR] = { 0x24, 8 }, | |
183 | [SCFCR] = { 0x18, 16 }, | |
184 | [SCFDR] = { 0x1c, 16 }, | |
185 | [SCTFDR] = sci_reg_invalid, | |
186 | [SCRFDR] = sci_reg_invalid, | |
187 | [SCSPTR] = sci_reg_invalid, | |
188 | [SCLSR] = sci_reg_invalid, | |
189 | }, | |
190 | ||
191 | /* | |
192 | * Common SCIFB definitions. | |
193 | */ | |
194 | [SCIx_SCIFB_REGTYPE] = { | |
195 | [SCSMR] = { 0x00, 16 }, | |
196 | [SCBRR] = { 0x04, 8 }, | |
197 | [SCSCR] = { 0x08, 16 }, | |
198 | [SCxTDR] = { 0x40, 8 }, | |
199 | [SCxSR] = { 0x14, 16 }, | |
200 | [SCxRDR] = { 0x60, 8 }, | |
201 | [SCFCR] = { 0x18, 16 }, | |
202 | [SCFDR] = { 0x1c, 16 }, | |
203 | [SCTFDR] = sci_reg_invalid, | |
204 | [SCRFDR] = sci_reg_invalid, | |
205 | [SCSPTR] = sci_reg_invalid, | |
206 | [SCLSR] = sci_reg_invalid, | |
207 | }, | |
208 | ||
3af1f8a4 PE |
209 | /* |
210 | * Common SH-2(A) SCIF definitions for ports with FIFO data | |
211 | * count registers. | |
212 | */ | |
213 | [SCIx_SH2_SCIF_FIFODATA_REGTYPE] = { | |
214 | [SCSMR] = { 0x00, 16 }, | |
215 | [SCBRR] = { 0x04, 8 }, | |
216 | [SCSCR] = { 0x08, 16 }, | |
217 | [SCxTDR] = { 0x0c, 8 }, | |
218 | [SCxSR] = { 0x10, 16 }, | |
219 | [SCxRDR] = { 0x14, 8 }, | |
220 | [SCFCR] = { 0x18, 16 }, | |
221 | [SCFDR] = { 0x1c, 16 }, | |
222 | [SCTFDR] = sci_reg_invalid, | |
223 | [SCRFDR] = sci_reg_invalid, | |
224 | [SCSPTR] = { 0x20, 16 }, | |
225 | [SCLSR] = { 0x24, 16 }, | |
226 | }, | |
227 | ||
61a6976b PM |
228 | /* |
229 | * Common SH-3 SCIF definitions. | |
230 | */ | |
231 | [SCIx_SH3_SCIF_REGTYPE] = { | |
232 | [SCSMR] = { 0x00, 8 }, | |
233 | [SCBRR] = { 0x02, 8 }, | |
234 | [SCSCR] = { 0x04, 8 }, | |
235 | [SCxTDR] = { 0x06, 8 }, | |
236 | [SCxSR] = { 0x08, 16 }, | |
237 | [SCxRDR] = { 0x0a, 8 }, | |
238 | [SCFCR] = { 0x0c, 8 }, | |
239 | [SCFDR] = { 0x0e, 16 }, | |
240 | [SCTFDR] = sci_reg_invalid, | |
241 | [SCRFDR] = sci_reg_invalid, | |
242 | [SCSPTR] = sci_reg_invalid, | |
243 | [SCLSR] = sci_reg_invalid, | |
244 | }, | |
245 | ||
246 | /* | |
247 | * Common SH-4(A) SCIF(B) definitions. | |
248 | */ | |
249 | [SCIx_SH4_SCIF_REGTYPE] = { | |
250 | [SCSMR] = { 0x00, 16 }, | |
251 | [SCBRR] = { 0x04, 8 }, | |
252 | [SCSCR] = { 0x08, 16 }, | |
253 | [SCxTDR] = { 0x0c, 8 }, | |
254 | [SCxSR] = { 0x10, 16 }, | |
255 | [SCxRDR] = { 0x14, 8 }, | |
256 | [SCFCR] = { 0x18, 16 }, | |
257 | [SCFDR] = { 0x1c, 16 }, | |
258 | [SCTFDR] = sci_reg_invalid, | |
259 | [SCRFDR] = sci_reg_invalid, | |
260 | [SCSPTR] = { 0x20, 16 }, | |
261 | [SCLSR] = { 0x24, 16 }, | |
262 | }, | |
263 | ||
264 | /* | |
265 | * Common SH-4(A) SCIF(B) definitions for ports without an SCSPTR | |
266 | * register. | |
267 | */ | |
268 | [SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE] = { | |
269 | [SCSMR] = { 0x00, 16 }, | |
270 | [SCBRR] = { 0x04, 8 }, | |
271 | [SCSCR] = { 0x08, 16 }, | |
272 | [SCxTDR] = { 0x0c, 8 }, | |
273 | [SCxSR] = { 0x10, 16 }, | |
274 | [SCxRDR] = { 0x14, 8 }, | |
275 | [SCFCR] = { 0x18, 16 }, | |
276 | [SCFDR] = { 0x1c, 16 }, | |
277 | [SCTFDR] = sci_reg_invalid, | |
278 | [SCRFDR] = sci_reg_invalid, | |
279 | [SCSPTR] = sci_reg_invalid, | |
280 | [SCLSR] = { 0x24, 16 }, | |
281 | }, | |
282 | ||
283 | /* | |
284 | * Common SH-4(A) SCIF(B) definitions for ports with FIFO data | |
285 | * count registers. | |
286 | */ | |
287 | [SCIx_SH4_SCIF_FIFODATA_REGTYPE] = { | |
288 | [SCSMR] = { 0x00, 16 }, | |
289 | [SCBRR] = { 0x04, 8 }, | |
290 | [SCSCR] = { 0x08, 16 }, | |
291 | [SCxTDR] = { 0x0c, 8 }, | |
292 | [SCxSR] = { 0x10, 16 }, | |
293 | [SCxRDR] = { 0x14, 8 }, | |
294 | [SCFCR] = { 0x18, 16 }, | |
295 | [SCFDR] = { 0x1c, 16 }, | |
296 | [SCTFDR] = { 0x1c, 16 }, /* aliased to SCFDR */ | |
297 | [SCRFDR] = { 0x20, 16 }, | |
298 | [SCSPTR] = { 0x24, 16 }, | |
299 | [SCLSR] = { 0x28, 16 }, | |
300 | }, | |
301 | ||
302 | /* | |
303 | * SH7705-style SCIF(B) ports, lacking both SCSPTR and SCLSR | |
304 | * registers. | |
305 | */ | |
306 | [SCIx_SH7705_SCIF_REGTYPE] = { | |
307 | [SCSMR] = { 0x00, 16 }, | |
308 | [SCBRR] = { 0x04, 8 }, | |
309 | [SCSCR] = { 0x08, 16 }, | |
310 | [SCxTDR] = { 0x20, 8 }, | |
311 | [SCxSR] = { 0x14, 16 }, | |
312 | [SCxRDR] = { 0x24, 8 }, | |
313 | [SCFCR] = { 0x18, 16 }, | |
314 | [SCFDR] = { 0x1c, 16 }, | |
315 | [SCTFDR] = sci_reg_invalid, | |
316 | [SCRFDR] = sci_reg_invalid, | |
317 | [SCSPTR] = sci_reg_invalid, | |
318 | [SCLSR] = sci_reg_invalid, | |
319 | }, | |
320 | }; | |
321 | ||
72b294cf PM |
322 | #define sci_getreg(up, offset) (sci_regmap[to_sci_port(up)->cfg->regtype] + offset) |
323 | ||
61a6976b PM |
324 | /* |
325 | * The "offset" here is rather misleading, in that it refers to an enum | |
326 | * value relative to the port mapping rather than the fixed offset | |
327 | * itself, which needs to be manually retrieved from the platform's | |
328 | * register map for the given port. | |
329 | */ | |
330 | static unsigned int sci_serial_in(struct uart_port *p, int offset) | |
331 | { | |
72b294cf | 332 | struct plat_sci_reg *reg = sci_getreg(p, offset); |
61a6976b PM |
333 | |
334 | if (reg->size == 8) | |
335 | return ioread8(p->membase + (reg->offset << p->regshift)); | |
336 | else if (reg->size == 16) | |
337 | return ioread16(p->membase + (reg->offset << p->regshift)); | |
338 | else | |
339 | WARN(1, "Invalid register access\n"); | |
340 | ||
341 | return 0; | |
342 | } | |
343 | ||
344 | static void sci_serial_out(struct uart_port *p, int offset, int value) | |
345 | { | |
72b294cf | 346 | struct plat_sci_reg *reg = sci_getreg(p, offset); |
61a6976b PM |
347 | |
348 | if (reg->size == 8) | |
349 | iowrite8(value, p->membase + (reg->offset << p->regshift)); | |
350 | else if (reg->size == 16) | |
351 | iowrite16(value, p->membase + (reg->offset << p->regshift)); | |
352 | else | |
353 | WARN(1, "Invalid register access\n"); | |
354 | } | |
355 | ||
356 | #define sci_in(up, offset) (up->serial_in(up, offset)) | |
357 | #define sci_out(up, offset, value) (up->serial_out(up, offset, value)) | |
358 | ||
359 | static int sci_probe_regmap(struct plat_sci_port *cfg) | |
360 | { | |
361 | switch (cfg->type) { | |
362 | case PORT_SCI: | |
363 | cfg->regtype = SCIx_SCI_REGTYPE; | |
364 | break; | |
365 | case PORT_IRDA: | |
366 | cfg->regtype = SCIx_IRDA_REGTYPE; | |
367 | break; | |
368 | case PORT_SCIFA: | |
369 | cfg->regtype = SCIx_SCIFA_REGTYPE; | |
370 | break; | |
371 | case PORT_SCIFB: | |
372 | cfg->regtype = SCIx_SCIFB_REGTYPE; | |
373 | break; | |
374 | case PORT_SCIF: | |
375 | /* | |
376 | * The SH-4 is a bit of a misnomer here, although that's | |
377 | * where this particular port layout originated. This | |
378 | * configuration (or some slight variation thereof) | |
379 | * remains the dominant model for all SCIFs. | |
380 | */ | |
381 | cfg->regtype = SCIx_SH4_SCIF_REGTYPE; | |
382 | break; | |
383 | default: | |
384 | printk(KERN_ERR "Can't probe register map for given port\n"); | |
385 | return -EINVAL; | |
386 | } | |
387 | ||
388 | return 0; | |
389 | } | |
390 | ||
23241d43 PM |
391 | static void sci_port_enable(struct sci_port *sci_port) |
392 | { | |
393 | if (!sci_port->port.dev) | |
394 | return; | |
395 | ||
396 | pm_runtime_get_sync(sci_port->port.dev); | |
397 | ||
398 | clk_enable(sci_port->iclk); | |
399 | sci_port->port.uartclk = clk_get_rate(sci_port->iclk); | |
400 | clk_enable(sci_port->fclk); | |
401 | } | |
402 | ||
403 | static void sci_port_disable(struct sci_port *sci_port) | |
404 | { | |
405 | if (!sci_port->port.dev) | |
406 | return; | |
407 | ||
408 | clk_disable(sci_port->fclk); | |
409 | clk_disable(sci_port->iclk); | |
410 | ||
411 | pm_runtime_put_sync(sci_port->port.dev); | |
412 | } | |
413 | ||
07d2a1a1 | 414 | #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) |
1f6fd5c9 PM |
415 | |
416 | #ifdef CONFIG_CONSOLE_POLL | |
07d2a1a1 | 417 | static int sci_poll_get_char(struct uart_port *port) |
1da177e4 | 418 | { |
1da177e4 LT |
419 | unsigned short status; |
420 | int c; | |
421 | ||
e108b2ca | 422 | do { |
1da177e4 LT |
423 | status = sci_in(port, SCxSR); |
424 | if (status & SCxSR_ERRORS(port)) { | |
94c8b6db | 425 | sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); |
1da177e4 LT |
426 | continue; |
427 | } | |
3f255eb3 JW |
428 | break; |
429 | } while (1); | |
430 | ||
431 | if (!(status & SCxSR_RDxF(port))) | |
432 | return NO_POLL_CHAR; | |
07d2a1a1 | 433 | |
1da177e4 | 434 | c = sci_in(port, SCxRDR); |
07d2a1a1 | 435 | |
e7c98dc7 MT |
436 | /* Dummy read */ |
437 | sci_in(port, SCxSR); | |
1da177e4 | 438 | sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); |
1da177e4 LT |
439 | |
440 | return c; | |
441 | } | |
1f6fd5c9 | 442 | #endif |
1da177e4 | 443 | |
07d2a1a1 | 444 | static void sci_poll_put_char(struct uart_port *port, unsigned char c) |
1da177e4 | 445 | { |
1da177e4 LT |
446 | unsigned short status; |
447 | ||
1da177e4 LT |
448 | do { |
449 | status = sci_in(port, SCxSR); | |
450 | } while (!(status & SCxSR_TDxE(port))); | |
451 | ||
272966c0 | 452 | sci_out(port, SCxTDR, c); |
dd0a3e77 | 453 | sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); |
1da177e4 | 454 | } |
07d2a1a1 | 455 | #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ |
1da177e4 | 456 | |
61a6976b | 457 | static void sci_init_pins(struct uart_port *port, unsigned int cflag) |
1da177e4 | 458 | { |
61a6976b PM |
459 | struct sci_port *s = to_sci_port(port); |
460 | struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR; | |
1da177e4 | 461 | |
61a6976b PM |
462 | /* |
463 | * Use port-specific handler if provided. | |
464 | */ | |
465 | if (s->cfg->ops && s->cfg->ops->init_pins) { | |
466 | s->cfg->ops->init_pins(port, cflag); | |
467 | return; | |
1da177e4 | 468 | } |
41504c39 | 469 | |
61a6976b PM |
470 | /* |
471 | * For the generic path SCSPTR is necessary. Bail out if that's | |
472 | * unavailable, too. | |
473 | */ | |
474 | if (!reg->size) | |
475 | return; | |
41504c39 | 476 | |
d5701647 | 477 | if (!(cflag & CRTSCTS)) |
61a6976b | 478 | sci_out(port, SCSPTR, 0x0080); /* Set RTS = 1 */ |
d5701647 | 479 | } |
e108b2ca | 480 | |
72b294cf | 481 | static int sci_txfill(struct uart_port *port) |
e108b2ca | 482 | { |
72b294cf | 483 | struct plat_sci_reg *reg; |
e108b2ca | 484 | |
72b294cf PM |
485 | reg = sci_getreg(port, SCTFDR); |
486 | if (reg->size) | |
73a19e4c | 487 | return sci_in(port, SCTFDR) & 0xff; |
c63847a3 | 488 | |
72b294cf PM |
489 | reg = sci_getreg(port, SCFDR); |
490 | if (reg->size) | |
d1d4b10c | 491 | return sci_in(port, SCFDR) >> 8; |
d1d4b10c | 492 | |
73a19e4c | 493 | return !(sci_in(port, SCxSR) & SCI_TDRE); |
e108b2ca PM |
494 | } |
495 | ||
73a19e4c GL |
496 | static int sci_txroom(struct uart_port *port) |
497 | { | |
72b294cf | 498 | return port->fifosize - sci_txfill(port); |
73a19e4c GL |
499 | } |
500 | ||
501 | static int sci_rxfill(struct uart_port *port) | |
e108b2ca | 502 | { |
72b294cf PM |
503 | struct plat_sci_reg *reg; |
504 | ||
505 | reg = sci_getreg(port, SCRFDR); | |
506 | if (reg->size) | |
507 | return sci_in(port, SCRFDR) & 0xff; | |
508 | ||
509 | reg = sci_getreg(port, SCFDR); | |
510 | if (reg->size) | |
511 | return sci_in(port, SCFDR) & ((port->fifosize << 1) - 1); | |
512 | ||
e7c98dc7 | 513 | return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; |
e108b2ca PM |
514 | } |
515 | ||
514820eb PM |
516 | /* |
517 | * SCI helper for checking the state of the muxed port/RXD pins. | |
518 | */ | |
519 | static inline int sci_rxd_in(struct uart_port *port) | |
520 | { | |
521 | struct sci_port *s = to_sci_port(port); | |
522 | ||
523 | if (s->cfg->port_reg <= 0) | |
524 | return 1; | |
525 | ||
526 | return !!__raw_readb(s->cfg->port_reg); | |
527 | } | |
528 | ||
1da177e4 LT |
529 | /* ********************************************************************** * |
530 | * the interrupt related routines * | |
531 | * ********************************************************************** */ | |
532 | ||
533 | static void sci_transmit_chars(struct uart_port *port) | |
534 | { | |
ebd2c8f6 | 535 | struct circ_buf *xmit = &port->state->xmit; |
1da177e4 | 536 | unsigned int stopped = uart_tx_stopped(port); |
1da177e4 LT |
537 | unsigned short status; |
538 | unsigned short ctrl; | |
e108b2ca | 539 | int count; |
1da177e4 LT |
540 | |
541 | status = sci_in(port, SCxSR); | |
542 | if (!(status & SCxSR_TDxE(port))) { | |
1da177e4 | 543 | ctrl = sci_in(port, SCSCR); |
e7c98dc7 | 544 | if (uart_circ_empty(xmit)) |
8e698614 | 545 | ctrl &= ~SCSCR_TIE; |
e7c98dc7 | 546 | else |
8e698614 | 547 | ctrl |= SCSCR_TIE; |
1da177e4 | 548 | sci_out(port, SCSCR, ctrl); |
1da177e4 LT |
549 | return; |
550 | } | |
551 | ||
72b294cf | 552 | count = sci_txroom(port); |
1da177e4 LT |
553 | |
554 | do { | |
555 | unsigned char c; | |
556 | ||
557 | if (port->x_char) { | |
558 | c = port->x_char; | |
559 | port->x_char = 0; | |
560 | } else if (!uart_circ_empty(xmit) && !stopped) { | |
561 | c = xmit->buf[xmit->tail]; | |
562 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
563 | } else { | |
564 | break; | |
565 | } | |
566 | ||
567 | sci_out(port, SCxTDR, c); | |
568 | ||
569 | port->icount.tx++; | |
570 | } while (--count > 0); | |
571 | ||
572 | sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); | |
573 | ||
574 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
575 | uart_write_wakeup(port); | |
576 | if (uart_circ_empty(xmit)) { | |
b129a8cc | 577 | sci_stop_tx(port); |
1da177e4 | 578 | } else { |
1da177e4 LT |
579 | ctrl = sci_in(port, SCSCR); |
580 | ||
1a22f08d | 581 | if (port->type != PORT_SCI) { |
1da177e4 LT |
582 | sci_in(port, SCxSR); /* Dummy read */ |
583 | sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); | |
584 | } | |
1da177e4 | 585 | |
8e698614 | 586 | ctrl |= SCSCR_TIE; |
1da177e4 | 587 | sci_out(port, SCSCR, ctrl); |
1da177e4 LT |
588 | } |
589 | } | |
590 | ||
591 | /* On SH3, SCIF may read end-of-break as a space->mark char */ | |
e7c98dc7 | 592 | #define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); }) |
1da177e4 | 593 | |
94c8b6db | 594 | static void sci_receive_chars(struct uart_port *port) |
1da177e4 | 595 | { |
e7c98dc7 | 596 | struct sci_port *sci_port = to_sci_port(port); |
ebd2c8f6 | 597 | struct tty_struct *tty = port->state->port.tty; |
1da177e4 LT |
598 | int i, count, copied = 0; |
599 | unsigned short status; | |
33f0f88f | 600 | unsigned char flag; |
1da177e4 LT |
601 | |
602 | status = sci_in(port, SCxSR); | |
603 | if (!(status & SCxSR_RDxF(port))) | |
604 | return; | |
605 | ||
606 | while (1) { | |
1da177e4 | 607 | /* Don't copy more bytes than there is room for in the buffer */ |
72b294cf | 608 | count = tty_buffer_request_room(tty, sci_rxfill(port)); |
1da177e4 LT |
609 | |
610 | /* If for any reason we can't copy more data, we're done! */ | |
611 | if (count == 0) | |
612 | break; | |
613 | ||
614 | if (port->type == PORT_SCI) { | |
615 | char c = sci_in(port, SCxRDR); | |
e7c98dc7 MT |
616 | if (uart_handle_sysrq_char(port, c) || |
617 | sci_port->break_flag) | |
1da177e4 | 618 | count = 0; |
e7c98dc7 | 619 | else |
e108b2ca | 620 | tty_insert_flip_char(tty, c, TTY_NORMAL); |
1da177e4 | 621 | } else { |
e7c98dc7 | 622 | for (i = 0; i < count; i++) { |
1da177e4 | 623 | char c = sci_in(port, SCxRDR); |
d97fbbed | 624 | |
1da177e4 LT |
625 | status = sci_in(port, SCxSR); |
626 | #if defined(CONFIG_CPU_SH3) | |
627 | /* Skip "chars" during break */ | |
e108b2ca | 628 | if (sci_port->break_flag) { |
1da177e4 LT |
629 | if ((c == 0) && |
630 | (status & SCxSR_FER(port))) { | |
631 | count--; i--; | |
632 | continue; | |
633 | } | |
e108b2ca | 634 | |
1da177e4 | 635 | /* Nonzero => end-of-break */ |
762c69e3 | 636 | dev_dbg(port->dev, "debounce<%02x>\n", c); |
e108b2ca PM |
637 | sci_port->break_flag = 0; |
638 | ||
1da177e4 LT |
639 | if (STEPFN(c)) { |
640 | count--; i--; | |
641 | continue; | |
642 | } | |
643 | } | |
644 | #endif /* CONFIG_CPU_SH3 */ | |
7d12e780 | 645 | if (uart_handle_sysrq_char(port, c)) { |
1da177e4 LT |
646 | count--; i--; |
647 | continue; | |
648 | } | |
649 | ||
650 | /* Store data and status */ | |
73a19e4c | 651 | if (status & SCxSR_FER(port)) { |
33f0f88f | 652 | flag = TTY_FRAME; |
d97fbbed | 653 | port->icount.frame++; |
762c69e3 | 654 | dev_notice(port->dev, "frame error\n"); |
73a19e4c | 655 | } else if (status & SCxSR_PER(port)) { |
33f0f88f | 656 | flag = TTY_PARITY; |
d97fbbed | 657 | port->icount.parity++; |
762c69e3 | 658 | dev_notice(port->dev, "parity error\n"); |
33f0f88f AC |
659 | } else |
660 | flag = TTY_NORMAL; | |
762c69e3 | 661 | |
33f0f88f | 662 | tty_insert_flip_char(tty, c, flag); |
1da177e4 LT |
663 | } |
664 | } | |
665 | ||
666 | sci_in(port, SCxSR); /* dummy read */ | |
667 | sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); | |
668 | ||
1da177e4 LT |
669 | copied += count; |
670 | port->icount.rx += count; | |
671 | } | |
672 | ||
673 | if (copied) { | |
674 | /* Tell the rest of the system the news. New characters! */ | |
675 | tty_flip_buffer_push(tty); | |
676 | } else { | |
677 | sci_in(port, SCxSR); /* dummy read */ | |
678 | sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); | |
679 | } | |
680 | } | |
681 | ||
682 | #define SCI_BREAK_JIFFIES (HZ/20) | |
94c8b6db PM |
683 | |
684 | /* | |
685 | * The sci generates interrupts during the break, | |
1da177e4 LT |
686 | * 1 per millisecond or so during the break period, for 9600 baud. |
687 | * So dont bother disabling interrupts. | |
688 | * But dont want more than 1 break event. | |
689 | * Use a kernel timer to periodically poll the rx line until | |
690 | * the break is finished. | |
691 | */ | |
94c8b6db | 692 | static inline void sci_schedule_break_timer(struct sci_port *port) |
1da177e4 | 693 | { |
bc9b3f5c | 694 | mod_timer(&port->break_timer, jiffies + SCI_BREAK_JIFFIES); |
1da177e4 | 695 | } |
94c8b6db | 696 | |
1da177e4 LT |
697 | /* Ensure that two consecutive samples find the break over. */ |
698 | static void sci_break_timer(unsigned long data) | |
699 | { | |
e108b2ca PM |
700 | struct sci_port *port = (struct sci_port *)data; |
701 | ||
23241d43 | 702 | sci_port_enable(port); |
5e50d2d6 | 703 | |
e108b2ca | 704 | if (sci_rxd_in(&port->port) == 0) { |
1da177e4 | 705 | port->break_flag = 1; |
e108b2ca PM |
706 | sci_schedule_break_timer(port); |
707 | } else if (port->break_flag == 1) { | |
1da177e4 LT |
708 | /* break is over. */ |
709 | port->break_flag = 2; | |
e108b2ca PM |
710 | sci_schedule_break_timer(port); |
711 | } else | |
712 | port->break_flag = 0; | |
5e50d2d6 | 713 | |
23241d43 | 714 | sci_port_disable(port); |
1da177e4 LT |
715 | } |
716 | ||
94c8b6db | 717 | static int sci_handle_errors(struct uart_port *port) |
1da177e4 LT |
718 | { |
719 | int copied = 0; | |
720 | unsigned short status = sci_in(port, SCxSR); | |
ebd2c8f6 | 721 | struct tty_struct *tty = port->state->port.tty; |
debf9507 | 722 | struct sci_port *s = to_sci_port(port); |
1da177e4 | 723 | |
debf9507 PM |
724 | /* |
725 | * Handle overruns, if supported. | |
726 | */ | |
727 | if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) { | |
728 | if (status & (1 << s->cfg->overrun_bit)) { | |
d97fbbed PM |
729 | port->icount.overrun++; |
730 | ||
debf9507 PM |
731 | /* overrun error */ |
732 | if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) | |
733 | copied++; | |
762c69e3 | 734 | |
debf9507 PM |
735 | dev_notice(port->dev, "overrun error"); |
736 | } | |
1da177e4 LT |
737 | } |
738 | ||
e108b2ca | 739 | if (status & SCxSR_FER(port)) { |
1da177e4 LT |
740 | if (sci_rxd_in(port) == 0) { |
741 | /* Notify of BREAK */ | |
e7c98dc7 | 742 | struct sci_port *sci_port = to_sci_port(port); |
e108b2ca PM |
743 | |
744 | if (!sci_port->break_flag) { | |
d97fbbed PM |
745 | port->icount.brk++; |
746 | ||
e108b2ca PM |
747 | sci_port->break_flag = 1; |
748 | sci_schedule_break_timer(sci_port); | |
749 | ||
1da177e4 | 750 | /* Do sysrq handling. */ |
e108b2ca | 751 | if (uart_handle_break(port)) |
1da177e4 | 752 | return 0; |
762c69e3 PM |
753 | |
754 | dev_dbg(port->dev, "BREAK detected\n"); | |
755 | ||
e108b2ca | 756 | if (tty_insert_flip_char(tty, 0, TTY_BREAK)) |
e7c98dc7 MT |
757 | copied++; |
758 | } | |
759 | ||
e108b2ca | 760 | } else { |
1da177e4 | 761 | /* frame error */ |
d97fbbed PM |
762 | port->icount.frame++; |
763 | ||
e108b2ca | 764 | if (tty_insert_flip_char(tty, 0, TTY_FRAME)) |
33f0f88f | 765 | copied++; |
762c69e3 PM |
766 | |
767 | dev_notice(port->dev, "frame error\n"); | |
1da177e4 LT |
768 | } |
769 | } | |
770 | ||
e108b2ca | 771 | if (status & SCxSR_PER(port)) { |
1da177e4 | 772 | /* parity error */ |
d97fbbed PM |
773 | port->icount.parity++; |
774 | ||
e108b2ca PM |
775 | if (tty_insert_flip_char(tty, 0, TTY_PARITY)) |
776 | copied++; | |
762c69e3 PM |
777 | |
778 | dev_notice(port->dev, "parity error"); | |
1da177e4 LT |
779 | } |
780 | ||
33f0f88f | 781 | if (copied) |
1da177e4 | 782 | tty_flip_buffer_push(tty); |
1da177e4 LT |
783 | |
784 | return copied; | |
785 | } | |
786 | ||
94c8b6db | 787 | static int sci_handle_fifo_overrun(struct uart_port *port) |
d830fa45 | 788 | { |
ebd2c8f6 | 789 | struct tty_struct *tty = port->state->port.tty; |
debf9507 | 790 | struct sci_port *s = to_sci_port(port); |
4b8c59a3 | 791 | struct plat_sci_reg *reg; |
d830fa45 PM |
792 | int copied = 0; |
793 | ||
4b8c59a3 PM |
794 | reg = sci_getreg(port, SCLSR); |
795 | if (!reg->size) | |
d830fa45 PM |
796 | return 0; |
797 | ||
debf9507 | 798 | if ((sci_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) { |
d830fa45 PM |
799 | sci_out(port, SCLSR, 0); |
800 | ||
d97fbbed PM |
801 | port->icount.overrun++; |
802 | ||
d830fa45 PM |
803 | tty_insert_flip_char(tty, 0, TTY_OVERRUN); |
804 | tty_flip_buffer_push(tty); | |
805 | ||
806 | dev_notice(port->dev, "overrun error\n"); | |
807 | copied++; | |
808 | } | |
809 | ||
810 | return copied; | |
811 | } | |
812 | ||
94c8b6db | 813 | static int sci_handle_breaks(struct uart_port *port) |
1da177e4 LT |
814 | { |
815 | int copied = 0; | |
816 | unsigned short status = sci_in(port, SCxSR); | |
ebd2c8f6 | 817 | struct tty_struct *tty = port->state->port.tty; |
a5660ada | 818 | struct sci_port *s = to_sci_port(port); |
1da177e4 | 819 | |
0b3d4ef6 PM |
820 | if (uart_handle_break(port)) |
821 | return 0; | |
822 | ||
b7a76e4b | 823 | if (!s->break_flag && status & SCxSR_BRK(port)) { |
1da177e4 LT |
824 | #if defined(CONFIG_CPU_SH3) |
825 | /* Debounce break */ | |
826 | s->break_flag = 1; | |
827 | #endif | |
d97fbbed PM |
828 | |
829 | port->icount.brk++; | |
830 | ||
1da177e4 | 831 | /* Notify of BREAK */ |
e108b2ca | 832 | if (tty_insert_flip_char(tty, 0, TTY_BREAK)) |
33f0f88f | 833 | copied++; |
762c69e3 PM |
834 | |
835 | dev_dbg(port->dev, "BREAK detected\n"); | |
1da177e4 LT |
836 | } |
837 | ||
33f0f88f | 838 | if (copied) |
1da177e4 | 839 | tty_flip_buffer_push(tty); |
e108b2ca | 840 | |
d830fa45 PM |
841 | copied += sci_handle_fifo_overrun(port); |
842 | ||
1da177e4 LT |
843 | return copied; |
844 | } | |
845 | ||
73a19e4c | 846 | static irqreturn_t sci_rx_interrupt(int irq, void *ptr) |
1da177e4 | 847 | { |
73a19e4c GL |
848 | #ifdef CONFIG_SERIAL_SH_SCI_DMA |
849 | struct uart_port *port = ptr; | |
850 | struct sci_port *s = to_sci_port(port); | |
851 | ||
852 | if (s->chan_rx) { | |
73a19e4c GL |
853 | u16 scr = sci_in(port, SCSCR); |
854 | u16 ssr = sci_in(port, SCxSR); | |
855 | ||
856 | /* Disable future Rx interrupts */ | |
d1d4b10c | 857 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { |
3089f381 GL |
858 | disable_irq_nosync(irq); |
859 | scr |= 0x4000; | |
860 | } else { | |
f43dc23d | 861 | scr &= ~SCSCR_RIE; |
3089f381 GL |
862 | } |
863 | sci_out(port, SCSCR, scr); | |
73a19e4c GL |
864 | /* Clear current interrupt */ |
865 | sci_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port))); | |
3089f381 GL |
866 | dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n", |
867 | jiffies, s->rx_timeout); | |
868 | mod_timer(&s->rx_timer, jiffies + s->rx_timeout); | |
73a19e4c GL |
869 | |
870 | return IRQ_HANDLED; | |
871 | } | |
872 | #endif | |
873 | ||
1da177e4 LT |
874 | /* I think sci_receive_chars has to be called irrespective |
875 | * of whether the I_IXOFF is set, otherwise, how is the interrupt | |
876 | * to be disabled? | |
877 | */ | |
73a19e4c | 878 | sci_receive_chars(ptr); |
1da177e4 LT |
879 | |
880 | return IRQ_HANDLED; | |
881 | } | |
882 | ||
7d12e780 | 883 | static irqreturn_t sci_tx_interrupt(int irq, void *ptr) |
1da177e4 LT |
884 | { |
885 | struct uart_port *port = ptr; | |
fd78a76a | 886 | unsigned long flags; |
1da177e4 | 887 | |
fd78a76a | 888 | spin_lock_irqsave(&port->lock, flags); |
1da177e4 | 889 | sci_transmit_chars(port); |
fd78a76a | 890 | spin_unlock_irqrestore(&port->lock, flags); |
1da177e4 LT |
891 | |
892 | return IRQ_HANDLED; | |
893 | } | |
894 | ||
7d12e780 | 895 | static irqreturn_t sci_er_interrupt(int irq, void *ptr) |
1da177e4 LT |
896 | { |
897 | struct uart_port *port = ptr; | |
898 | ||
899 | /* Handle errors */ | |
900 | if (port->type == PORT_SCI) { | |
901 | if (sci_handle_errors(port)) { | |
902 | /* discard character in rx buffer */ | |
903 | sci_in(port, SCxSR); | |
904 | sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); | |
905 | } | |
906 | } else { | |
d830fa45 | 907 | sci_handle_fifo_overrun(port); |
7d12e780 | 908 | sci_rx_interrupt(irq, ptr); |
1da177e4 LT |
909 | } |
910 | ||
911 | sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); | |
912 | ||
913 | /* Kick the transmission */ | |
7d12e780 | 914 | sci_tx_interrupt(irq, ptr); |
1da177e4 LT |
915 | |
916 | return IRQ_HANDLED; | |
917 | } | |
918 | ||
7d12e780 | 919 | static irqreturn_t sci_br_interrupt(int irq, void *ptr) |
1da177e4 LT |
920 | { |
921 | struct uart_port *port = ptr; | |
922 | ||
923 | /* Handle BREAKs */ | |
924 | sci_handle_breaks(port); | |
925 | sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); | |
926 | ||
927 | return IRQ_HANDLED; | |
928 | } | |
929 | ||
f43dc23d PM |
930 | static inline unsigned long port_rx_irq_mask(struct uart_port *port) |
931 | { | |
932 | /* | |
933 | * Not all ports (such as SCIFA) will support REIE. Rather than | |
934 | * special-casing the port type, we check the port initialization | |
935 | * IRQ enable mask to see whether the IRQ is desired at all. If | |
936 | * it's unset, it's logically inferred that there's no point in | |
937 | * testing for it. | |
938 | */ | |
ce6738b6 | 939 | return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE); |
f43dc23d PM |
940 | } |
941 | ||
7d12e780 | 942 | static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) |
1da177e4 | 943 | { |
44e18e9e | 944 | unsigned short ssr_status, scr_status, err_enabled; |
a8884e34 | 945 | struct uart_port *port = ptr; |
73a19e4c | 946 | struct sci_port *s = to_sci_port(port); |
a8884e34 | 947 | irqreturn_t ret = IRQ_NONE; |
1da177e4 | 948 | |
e7c98dc7 MT |
949 | ssr_status = sci_in(port, SCxSR); |
950 | scr_status = sci_in(port, SCSCR); | |
f43dc23d | 951 | err_enabled = scr_status & port_rx_irq_mask(port); |
1da177e4 LT |
952 | |
953 | /* Tx Interrupt */ | |
f43dc23d | 954 | if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCSCR_TIE) && |
73a19e4c | 955 | !s->chan_tx) |
a8884e34 | 956 | ret = sci_tx_interrupt(irq, ptr); |
f43dc23d | 957 | |
73a19e4c GL |
958 | /* |
959 | * Rx Interrupt: if we're using DMA, the DMA controller clears RDF / | |
960 | * DR flags | |
961 | */ | |
962 | if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) && | |
f43dc23d | 963 | (scr_status & SCSCR_RIE)) |
a8884e34 | 964 | ret = sci_rx_interrupt(irq, ptr); |
f43dc23d | 965 | |
1da177e4 | 966 | /* Error Interrupt */ |
dd4da3a5 | 967 | if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled) |
a8884e34 | 968 | ret = sci_er_interrupt(irq, ptr); |
f43dc23d | 969 | |
1da177e4 | 970 | /* Break Interrupt */ |
dd4da3a5 | 971 | if ((ssr_status & SCxSR_BRK(port)) && err_enabled) |
a8884e34 | 972 | ret = sci_br_interrupt(irq, ptr); |
1da177e4 | 973 | |
a8884e34 | 974 | return ret; |
1da177e4 LT |
975 | } |
976 | ||
1da177e4 | 977 | /* |
25985edc | 978 | * Here we define a transition notifier so that we can update all of our |
1da177e4 LT |
979 | * ports' baud rate when the peripheral clock changes. |
980 | */ | |
e108b2ca PM |
981 | static int sci_notifier(struct notifier_block *self, |
982 | unsigned long phase, void *p) | |
1da177e4 | 983 | { |
e552de24 MD |
984 | struct sci_port *sci_port; |
985 | unsigned long flags; | |
1da177e4 | 986 | |
d535a230 PM |
987 | sci_port = container_of(self, struct sci_port, freq_transition); |
988 | ||
1da177e4 | 989 | if ((phase == CPUFREQ_POSTCHANGE) || |
e552de24 | 990 | (phase == CPUFREQ_RESUMECHANGE)) { |
d535a230 | 991 | struct uart_port *port = &sci_port->port; |
073e84c9 | 992 | |
d535a230 PM |
993 | spin_lock_irqsave(&port->lock, flags); |
994 | port->uartclk = clk_get_rate(sci_port->iclk); | |
995 | spin_unlock_irqrestore(&port->lock, flags); | |
e552de24 | 996 | } |
1da177e4 | 997 | |
1da177e4 LT |
998 | return NOTIFY_OK; |
999 | } | |
501b825d | 1000 | |
9174fc8f PM |
1001 | static struct sci_irq_desc { |
1002 | const char *desc; | |
1003 | irq_handler_t handler; | |
1004 | } sci_irq_desc[] = { | |
1005 | /* | |
1006 | * Split out handlers, the default case. | |
1007 | */ | |
1008 | [SCIx_ERI_IRQ] = { | |
1009 | .desc = "rx err", | |
1010 | .handler = sci_er_interrupt, | |
1011 | }, | |
1012 | ||
1013 | [SCIx_RXI_IRQ] = { | |
1014 | .desc = "rx full", | |
1015 | .handler = sci_rx_interrupt, | |
1016 | }, | |
1017 | ||
1018 | [SCIx_TXI_IRQ] = { | |
1019 | .desc = "tx empty", | |
1020 | .handler = sci_tx_interrupt, | |
1021 | }, | |
1022 | ||
1023 | [SCIx_BRI_IRQ] = { | |
1024 | .desc = "break", | |
1025 | .handler = sci_br_interrupt, | |
1026 | }, | |
1027 | ||
1028 | /* | |
1029 | * Special muxed handler. | |
1030 | */ | |
1031 | [SCIx_MUX_IRQ] = { | |
1032 | .desc = "mux", | |
1033 | .handler = sci_mpxed_interrupt, | |
1034 | }, | |
1035 | }; | |
1036 | ||
1da177e4 LT |
1037 | static int sci_request_irq(struct sci_port *port) |
1038 | { | |
9174fc8f PM |
1039 | struct uart_port *up = &port->port; |
1040 | int i, j, ret = 0; | |
1041 | ||
1042 | for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) { | |
1043 | struct sci_irq_desc *desc; | |
1044 | unsigned int irq; | |
1045 | ||
1046 | if (SCIx_IRQ_IS_MUXED(port)) { | |
1047 | i = SCIx_MUX_IRQ; | |
1048 | irq = up->irq; | |
1049 | } else | |
1050 | irq = port->cfg->irqs[i]; | |
1051 | ||
1052 | desc = sci_irq_desc + i; | |
1053 | port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s", | |
1054 | dev_name(up->dev), desc->desc); | |
1055 | if (!port->irqstr[j]) { | |
1056 | dev_err(up->dev, "Failed to allocate %s IRQ string\n", | |
1057 | desc->desc); | |
1058 | goto out_nomem; | |
1da177e4 | 1059 | } |
9174fc8f PM |
1060 | |
1061 | ret = request_irq(irq, desc->handler, up->irqflags, | |
1062 | port->irqstr[j], port); | |
1063 | if (unlikely(ret)) { | |
1064 | dev_err(up->dev, "Can't allocate %s IRQ\n", desc->desc); | |
1065 | goto out_noirq; | |
1da177e4 LT |
1066 | } |
1067 | } | |
1068 | ||
1069 | return 0; | |
9174fc8f PM |
1070 | |
1071 | out_noirq: | |
1072 | while (--i >= 0) | |
1073 | free_irq(port->cfg->irqs[i], port); | |
1074 | ||
1075 | out_nomem: | |
1076 | while (--j >= 0) | |
1077 | kfree(port->irqstr[j]); | |
1078 | ||
1079 | return ret; | |
1da177e4 LT |
1080 | } |
1081 | ||
1082 | static void sci_free_irq(struct sci_port *port) | |
1083 | { | |
1084 | int i; | |
1085 | ||
9174fc8f PM |
1086 | /* |
1087 | * Intentionally in reverse order so we iterate over the muxed | |
1088 | * IRQ first. | |
1089 | */ | |
1090 | for (i = 0; i < SCIx_NR_IRQS; i++) { | |
1091 | free_irq(port->cfg->irqs[i], port); | |
1092 | kfree(port->irqstr[i]); | |
1da177e4 | 1093 | |
9174fc8f PM |
1094 | if (SCIx_IRQ_IS_MUXED(port)) { |
1095 | /* If there's only one IRQ, we're done. */ | |
1096 | return; | |
1da177e4 LT |
1097 | } |
1098 | } | |
1099 | } | |
1100 | ||
1101 | static unsigned int sci_tx_empty(struct uart_port *port) | |
1102 | { | |
b1516803 | 1103 | unsigned short status = sci_in(port, SCxSR); |
72b294cf | 1104 | unsigned short in_tx_fifo = sci_txfill(port); |
73a19e4c GL |
1105 | |
1106 | return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0; | |
1da177e4 LT |
1107 | } |
1108 | ||
cdf7c42f PM |
1109 | /* |
1110 | * Modem control is a bit of a mixed bag for SCI(F) ports. Generally | |
1111 | * CTS/RTS is supported in hardware by at least one port and controlled | |
1112 | * via SCSPTR (SCxPCR for SCIFA/B parts), or external pins (presently | |
1113 | * handled via the ->init_pins() op, which is a bit of a one-way street, | |
1114 | * lacking any ability to defer pin control -- this will later be | |
1115 | * converted over to the GPIO framework). | |
1116 | */ | |
1da177e4 LT |
1117 | static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) |
1118 | { | |
cdf7c42f | 1119 | /* Nothing to do here. */ |
1da177e4 LT |
1120 | } |
1121 | ||
1122 | static unsigned int sci_get_mctrl(struct uart_port *port) | |
1123 | { | |
cdf7c42f PM |
1124 | /* |
1125 | * CTS/RTS is handled in hardware when supported, while nothing | |
1126 | * else is wired up. Keep it simple and simply assert DSR/CAR. | |
1127 | */ | |
1128 | return TIOCM_DSR | TIOCM_CAR; | |
1da177e4 LT |
1129 | } |
1130 | ||
73a19e4c GL |
1131 | #ifdef CONFIG_SERIAL_SH_SCI_DMA |
1132 | static void sci_dma_tx_complete(void *arg) | |
1133 | { | |
1134 | struct sci_port *s = arg; | |
1135 | struct uart_port *port = &s->port; | |
1136 | struct circ_buf *xmit = &port->state->xmit; | |
1137 | unsigned long flags; | |
1138 | ||
1139 | dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); | |
1140 | ||
1141 | spin_lock_irqsave(&port->lock, flags); | |
1142 | ||
f354a381 | 1143 | xmit->tail += sg_dma_len(&s->sg_tx); |
73a19e4c GL |
1144 | xmit->tail &= UART_XMIT_SIZE - 1; |
1145 | ||
f354a381 | 1146 | port->icount.tx += sg_dma_len(&s->sg_tx); |
73a19e4c GL |
1147 | |
1148 | async_tx_ack(s->desc_tx); | |
1149 | s->cookie_tx = -EINVAL; | |
1150 | s->desc_tx = NULL; | |
1151 | ||
73a19e4c GL |
1152 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) |
1153 | uart_write_wakeup(port); | |
1154 | ||
3089f381 | 1155 | if (!uart_circ_empty(xmit)) { |
73a19e4c | 1156 | schedule_work(&s->work_tx); |
d1d4b10c | 1157 | } else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { |
3089f381 | 1158 | u16 ctrl = sci_in(port, SCSCR); |
f43dc23d | 1159 | sci_out(port, SCSCR, ctrl & ~SCSCR_TIE); |
3089f381 GL |
1160 | } |
1161 | ||
1162 | spin_unlock_irqrestore(&port->lock, flags); | |
73a19e4c GL |
1163 | } |
1164 | ||
1165 | /* Locking: called with port lock held */ | |
1166 | static int sci_dma_rx_push(struct sci_port *s, struct tty_struct *tty, | |
1167 | size_t count) | |
1168 | { | |
1169 | struct uart_port *port = &s->port; | |
1170 | int i, active, room; | |
1171 | ||
1172 | room = tty_buffer_request_room(tty, count); | |
1173 | ||
1174 | if (s->active_rx == s->cookie_rx[0]) { | |
1175 | active = 0; | |
1176 | } else if (s->active_rx == s->cookie_rx[1]) { | |
1177 | active = 1; | |
1178 | } else { | |
1179 | dev_err(port->dev, "cookie %d not found!\n", s->active_rx); | |
1180 | return 0; | |
1181 | } | |
1182 | ||
1183 | if (room < count) | |
1184 | dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", | |
1185 | count - room); | |
1186 | if (!room) | |
1187 | return room; | |
1188 | ||
1189 | for (i = 0; i < room; i++) | |
1190 | tty_insert_flip_char(tty, ((u8 *)sg_virt(&s->sg_rx[active]))[i], | |
1191 | TTY_NORMAL); | |
1192 | ||
1193 | port->icount.rx += room; | |
1194 | ||
1195 | return room; | |
1196 | } | |
1197 | ||
1198 | static void sci_dma_rx_complete(void *arg) | |
1199 | { | |
1200 | struct sci_port *s = arg; | |
1201 | struct uart_port *port = &s->port; | |
1202 | struct tty_struct *tty = port->state->port.tty; | |
1203 | unsigned long flags; | |
1204 | int count; | |
1205 | ||
3089f381 | 1206 | dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx); |
73a19e4c GL |
1207 | |
1208 | spin_lock_irqsave(&port->lock, flags); | |
1209 | ||
1210 | count = sci_dma_rx_push(s, tty, s->buf_len_rx); | |
1211 | ||
3089f381 | 1212 | mod_timer(&s->rx_timer, jiffies + s->rx_timeout); |
73a19e4c GL |
1213 | |
1214 | spin_unlock_irqrestore(&port->lock, flags); | |
1215 | ||
1216 | if (count) | |
1217 | tty_flip_buffer_push(tty); | |
1218 | ||
1219 | schedule_work(&s->work_rx); | |
1220 | } | |
1221 | ||
73a19e4c GL |
1222 | static void sci_rx_dma_release(struct sci_port *s, bool enable_pio) |
1223 | { | |
1224 | struct dma_chan *chan = s->chan_rx; | |
1225 | struct uart_port *port = &s->port; | |
73a19e4c GL |
1226 | |
1227 | s->chan_rx = NULL; | |
1228 | s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL; | |
1229 | dma_release_channel(chan); | |
85b8e3ff GL |
1230 | if (sg_dma_address(&s->sg_rx[0])) |
1231 | dma_free_coherent(port->dev, s->buf_len_rx * 2, | |
1232 | sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0])); | |
73a19e4c GL |
1233 | if (enable_pio) |
1234 | sci_start_rx(port); | |
1235 | } | |
1236 | ||
1237 | static void sci_tx_dma_release(struct sci_port *s, bool enable_pio) | |
1238 | { | |
1239 | struct dma_chan *chan = s->chan_tx; | |
1240 | struct uart_port *port = &s->port; | |
73a19e4c GL |
1241 | |
1242 | s->chan_tx = NULL; | |
1243 | s->cookie_tx = -EINVAL; | |
1244 | dma_release_channel(chan); | |
1245 | if (enable_pio) | |
1246 | sci_start_tx(port); | |
1247 | } | |
1248 | ||
1249 | static void sci_submit_rx(struct sci_port *s) | |
1250 | { | |
1251 | struct dma_chan *chan = s->chan_rx; | |
1252 | int i; | |
1253 | ||
1254 | for (i = 0; i < 2; i++) { | |
1255 | struct scatterlist *sg = &s->sg_rx[i]; | |
1256 | struct dma_async_tx_descriptor *desc; | |
1257 | ||
1258 | desc = chan->device->device_prep_slave_sg(chan, | |
1259 | sg, 1, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT); | |
1260 | ||
1261 | if (desc) { | |
1262 | s->desc_rx[i] = desc; | |
1263 | desc->callback = sci_dma_rx_complete; | |
1264 | desc->callback_param = s; | |
1265 | s->cookie_rx[i] = desc->tx_submit(desc); | |
1266 | } | |
1267 | ||
1268 | if (!desc || s->cookie_rx[i] < 0) { | |
1269 | if (i) { | |
1270 | async_tx_ack(s->desc_rx[0]); | |
1271 | s->cookie_rx[0] = -EINVAL; | |
1272 | } | |
1273 | if (desc) { | |
1274 | async_tx_ack(desc); | |
1275 | s->cookie_rx[i] = -EINVAL; | |
1276 | } | |
1277 | dev_warn(s->port.dev, | |
1278 | "failed to re-start DMA, using PIO\n"); | |
1279 | sci_rx_dma_release(s, true); | |
1280 | return; | |
1281 | } | |
3089f381 GL |
1282 | dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__, |
1283 | s->cookie_rx[i], i); | |
73a19e4c GL |
1284 | } |
1285 | ||
1286 | s->active_rx = s->cookie_rx[0]; | |
1287 | ||
1288 | dma_async_issue_pending(chan); | |
1289 | } | |
1290 | ||
1291 | static void work_fn_rx(struct work_struct *work) | |
1292 | { | |
1293 | struct sci_port *s = container_of(work, struct sci_port, work_rx); | |
1294 | struct uart_port *port = &s->port; | |
1295 | struct dma_async_tx_descriptor *desc; | |
1296 | int new; | |
1297 | ||
1298 | if (s->active_rx == s->cookie_rx[0]) { | |
1299 | new = 0; | |
1300 | } else if (s->active_rx == s->cookie_rx[1]) { | |
1301 | new = 1; | |
1302 | } else { | |
1303 | dev_err(port->dev, "cookie %d not found!\n", s->active_rx); | |
1304 | return; | |
1305 | } | |
1306 | desc = s->desc_rx[new]; | |
1307 | ||
1308 | if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) != | |
1309 | DMA_SUCCESS) { | |
1310 | /* Handle incomplete DMA receive */ | |
1311 | struct tty_struct *tty = port->state->port.tty; | |
1312 | struct dma_chan *chan = s->chan_rx; | |
1313 | struct sh_desc *sh_desc = container_of(desc, struct sh_desc, | |
1314 | async_tx); | |
1315 | unsigned long flags; | |
1316 | int count; | |
1317 | ||
05827630 | 1318 | chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); |
73a19e4c GL |
1319 | dev_dbg(port->dev, "Read %u bytes with cookie %d\n", |
1320 | sh_desc->partial, sh_desc->cookie); | |
1321 | ||
1322 | spin_lock_irqsave(&port->lock, flags); | |
1323 | count = sci_dma_rx_push(s, tty, sh_desc->partial); | |
1324 | spin_unlock_irqrestore(&port->lock, flags); | |
1325 | ||
1326 | if (count) | |
1327 | tty_flip_buffer_push(tty); | |
1328 | ||
1329 | sci_submit_rx(s); | |
1330 | ||
1331 | return; | |
1332 | } | |
1333 | ||
1334 | s->cookie_rx[new] = desc->tx_submit(desc); | |
1335 | if (s->cookie_rx[new] < 0) { | |
1336 | dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n"); | |
1337 | sci_rx_dma_release(s, true); | |
1338 | return; | |
1339 | } | |
1340 | ||
73a19e4c | 1341 | s->active_rx = s->cookie_rx[!new]; |
3089f381 GL |
1342 | |
1343 | dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__, | |
1344 | s->cookie_rx[new], new, s->active_rx); | |
73a19e4c GL |
1345 | } |
1346 | ||
1347 | static void work_fn_tx(struct work_struct *work) | |
1348 | { | |
1349 | struct sci_port *s = container_of(work, struct sci_port, work_tx); | |
1350 | struct dma_async_tx_descriptor *desc; | |
1351 | struct dma_chan *chan = s->chan_tx; | |
1352 | struct uart_port *port = &s->port; | |
1353 | struct circ_buf *xmit = &port->state->xmit; | |
1354 | struct scatterlist *sg = &s->sg_tx; | |
1355 | ||
1356 | /* | |
1357 | * DMA is idle now. | |
1358 | * Port xmit buffer is already mapped, and it is one page... Just adjust | |
1359 | * offsets and lengths. Since it is a circular buffer, we have to | |
1360 | * transmit till the end, and then the rest. Take the port lock to get a | |
1361 | * consistent xmit buffer state. | |
1362 | */ | |
1363 | spin_lock_irq(&port->lock); | |
1364 | sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); | |
f354a381 | 1365 | sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + |
73a19e4c | 1366 | sg->offset; |
f354a381 | 1367 | sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), |
73a19e4c | 1368 | CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE)); |
73a19e4c GL |
1369 | spin_unlock_irq(&port->lock); |
1370 | ||
f354a381 | 1371 | BUG_ON(!sg_dma_len(sg)); |
73a19e4c GL |
1372 | |
1373 | desc = chan->device->device_prep_slave_sg(chan, | |
1374 | sg, s->sg_len_tx, DMA_TO_DEVICE, | |
1375 | DMA_PREP_INTERRUPT | DMA_CTRL_ACK); | |
1376 | if (!desc) { | |
1377 | /* switch to PIO */ | |
1378 | sci_tx_dma_release(s, true); | |
1379 | return; | |
1380 | } | |
1381 | ||
1382 | dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); | |
1383 | ||
1384 | spin_lock_irq(&port->lock); | |
1385 | s->desc_tx = desc; | |
1386 | desc->callback = sci_dma_tx_complete; | |
1387 | desc->callback_param = s; | |
1388 | spin_unlock_irq(&port->lock); | |
1389 | s->cookie_tx = desc->tx_submit(desc); | |
1390 | if (s->cookie_tx < 0) { | |
1391 | dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n"); | |
1392 | /* switch to PIO */ | |
1393 | sci_tx_dma_release(s, true); | |
1394 | return; | |
1395 | } | |
1396 | ||
1397 | dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__, | |
1398 | xmit->buf, xmit->tail, xmit->head, s->cookie_tx); | |
1399 | ||
1400 | dma_async_issue_pending(chan); | |
1401 | } | |
1402 | #endif | |
1403 | ||
b129a8cc | 1404 | static void sci_start_tx(struct uart_port *port) |
1da177e4 | 1405 | { |
3089f381 | 1406 | struct sci_port *s = to_sci_port(port); |
e108b2ca | 1407 | unsigned short ctrl; |
1da177e4 | 1408 | |
73a19e4c | 1409 | #ifdef CONFIG_SERIAL_SH_SCI_DMA |
d1d4b10c | 1410 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { |
3089f381 GL |
1411 | u16 new, scr = sci_in(port, SCSCR); |
1412 | if (s->chan_tx) | |
1413 | new = scr | 0x8000; | |
1414 | else | |
1415 | new = scr & ~0x8000; | |
1416 | if (new != scr) | |
1417 | sci_out(port, SCSCR, new); | |
73a19e4c | 1418 | } |
f43dc23d | 1419 | |
3089f381 GL |
1420 | if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && |
1421 | s->cookie_tx < 0) | |
1422 | schedule_work(&s->work_tx); | |
73a19e4c | 1423 | #endif |
f43dc23d | 1424 | |
d1d4b10c | 1425 | if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) { |
3089f381 GL |
1426 | /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ |
1427 | ctrl = sci_in(port, SCSCR); | |
f43dc23d | 1428 | sci_out(port, SCSCR, ctrl | SCSCR_TIE); |
3089f381 | 1429 | } |
1da177e4 LT |
1430 | } |
1431 | ||
b129a8cc | 1432 | static void sci_stop_tx(struct uart_port *port) |
1da177e4 | 1433 | { |
1da177e4 LT |
1434 | unsigned short ctrl; |
1435 | ||
1436 | /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ | |
1da177e4 | 1437 | ctrl = sci_in(port, SCSCR); |
f43dc23d | 1438 | |
d1d4b10c | 1439 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) |
3089f381 | 1440 | ctrl &= ~0x8000; |
f43dc23d | 1441 | |
8e698614 | 1442 | ctrl &= ~SCSCR_TIE; |
f43dc23d | 1443 | |
1da177e4 | 1444 | sci_out(port, SCSCR, ctrl); |
1da177e4 LT |
1445 | } |
1446 | ||
73a19e4c | 1447 | static void sci_start_rx(struct uart_port *port) |
1da177e4 | 1448 | { |
1da177e4 LT |
1449 | unsigned short ctrl; |
1450 | ||
f43dc23d | 1451 | ctrl = sci_in(port, SCSCR) | port_rx_irq_mask(port); |
1da177e4 | 1452 | |
d1d4b10c | 1453 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) |
3089f381 | 1454 | ctrl &= ~0x4000; |
f43dc23d | 1455 | |
1da177e4 | 1456 | sci_out(port, SCSCR, ctrl); |
1da177e4 LT |
1457 | } |
1458 | ||
1459 | static void sci_stop_rx(struct uart_port *port) | |
1460 | { | |
1da177e4 LT |
1461 | unsigned short ctrl; |
1462 | ||
1da177e4 | 1463 | ctrl = sci_in(port, SCSCR); |
f43dc23d | 1464 | |
d1d4b10c | 1465 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) |
3089f381 | 1466 | ctrl &= ~0x4000; |
f43dc23d PM |
1467 | |
1468 | ctrl &= ~port_rx_irq_mask(port); | |
1469 | ||
1da177e4 | 1470 | sci_out(port, SCSCR, ctrl); |
1da177e4 LT |
1471 | } |
1472 | ||
1473 | static void sci_enable_ms(struct uart_port *port) | |
1474 | { | |
d39ec6ce PM |
1475 | /* |
1476 | * Not supported by hardware, always a nop. | |
1477 | */ | |
1da177e4 LT |
1478 | } |
1479 | ||
1480 | static void sci_break_ctl(struct uart_port *port, int break_state) | |
1481 | { | |
d39ec6ce PM |
1482 | /* |
1483 | * Not supported by hardware. Most parts couple break and rx | |
1484 | * interrupts together, with break detection always enabled. | |
1485 | */ | |
1da177e4 LT |
1486 | } |
1487 | ||
73a19e4c GL |
1488 | #ifdef CONFIG_SERIAL_SH_SCI_DMA |
1489 | static bool filter(struct dma_chan *chan, void *slave) | |
1490 | { | |
1491 | struct sh_dmae_slave *param = slave; | |
1492 | ||
1493 | dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__, | |
1494 | param->slave_id); | |
1495 | ||
937bb6e4 GL |
1496 | chan->private = param; |
1497 | return true; | |
73a19e4c GL |
1498 | } |
1499 | ||
1500 | static void rx_timer_fn(unsigned long arg) | |
1501 | { | |
1502 | struct sci_port *s = (struct sci_port *)arg; | |
1503 | struct uart_port *port = &s->port; | |
73a19e4c | 1504 | u16 scr = sci_in(port, SCSCR); |
3089f381 | 1505 | |
d1d4b10c | 1506 | if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { |
3089f381 | 1507 | scr &= ~0x4000; |
ce6738b6 | 1508 | enable_irq(s->cfg->irqs[1]); |
3089f381 | 1509 | } |
f43dc23d | 1510 | sci_out(port, SCSCR, scr | SCSCR_RIE); |
73a19e4c GL |
1511 | dev_dbg(port->dev, "DMA Rx timed out\n"); |
1512 | schedule_work(&s->work_rx); | |
1513 | } | |
1514 | ||
1515 | static void sci_request_dma(struct uart_port *port) | |
1516 | { | |
1517 | struct sci_port *s = to_sci_port(port); | |
1518 | struct sh_dmae_slave *param; | |
1519 | struct dma_chan *chan; | |
1520 | dma_cap_mask_t mask; | |
1521 | int nent; | |
1522 | ||
937bb6e4 GL |
1523 | dev_dbg(port->dev, "%s: port %d\n", __func__, |
1524 | port->line); | |
73a19e4c | 1525 | |
937bb6e4 | 1526 | if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0) |
73a19e4c GL |
1527 | return; |
1528 | ||
1529 | dma_cap_zero(mask); | |
1530 | dma_cap_set(DMA_SLAVE, mask); | |
1531 | ||
1532 | param = &s->param_tx; | |
1533 | ||
1534 | /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */ | |
ce6738b6 | 1535 | param->slave_id = s->cfg->dma_slave_tx; |
73a19e4c GL |
1536 | |
1537 | s->cookie_tx = -EINVAL; | |
1538 | chan = dma_request_channel(mask, filter, param); | |
1539 | dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan); | |
1540 | if (chan) { | |
1541 | s->chan_tx = chan; | |
1542 | sg_init_table(&s->sg_tx, 1); | |
1543 | /* UART circular tx buffer is an aligned page. */ | |
1544 | BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK); | |
1545 | sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf), | |
1546 | UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK); | |
1547 | nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE); | |
1548 | if (!nent) | |
1549 | sci_tx_dma_release(s, false); | |
1550 | else | |
1551 | dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__, | |
1552 | sg_dma_len(&s->sg_tx), | |
1553 | port->state->xmit.buf, sg_dma_address(&s->sg_tx)); | |
1554 | ||
1555 | s->sg_len_tx = nent; | |
1556 | ||
1557 | INIT_WORK(&s->work_tx, work_fn_tx); | |
1558 | } | |
1559 | ||
1560 | param = &s->param_rx; | |
1561 | ||
1562 | /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */ | |
ce6738b6 | 1563 | param->slave_id = s->cfg->dma_slave_rx; |
73a19e4c GL |
1564 | |
1565 | chan = dma_request_channel(mask, filter, param); | |
1566 | dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan); | |
1567 | if (chan) { | |
1568 | dma_addr_t dma[2]; | |
1569 | void *buf[2]; | |
1570 | int i; | |
1571 | ||
1572 | s->chan_rx = chan; | |
1573 | ||
1574 | s->buf_len_rx = 2 * max(16, (int)port->fifosize); | |
1575 | buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2, | |
1576 | &dma[0], GFP_KERNEL); | |
1577 | ||
1578 | if (!buf[0]) { | |
1579 | dev_warn(port->dev, | |
1580 | "failed to allocate dma buffer, using PIO\n"); | |
1581 | sci_rx_dma_release(s, true); | |
1582 | return; | |
1583 | } | |
1584 | ||
1585 | buf[1] = buf[0] + s->buf_len_rx; | |
1586 | dma[1] = dma[0] + s->buf_len_rx; | |
1587 | ||
1588 | for (i = 0; i < 2; i++) { | |
1589 | struct scatterlist *sg = &s->sg_rx[i]; | |
1590 | ||
1591 | sg_init_table(sg, 1); | |
1592 | sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx, | |
1593 | (int)buf[i] & ~PAGE_MASK); | |
f354a381 | 1594 | sg_dma_address(sg) = dma[i]; |
73a19e4c GL |
1595 | } |
1596 | ||
1597 | INIT_WORK(&s->work_rx, work_fn_rx); | |
1598 | setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s); | |
1599 | ||
1600 | sci_submit_rx(s); | |
1601 | } | |
1602 | } | |
1603 | ||
1604 | static void sci_free_dma(struct uart_port *port) | |
1605 | { | |
1606 | struct sci_port *s = to_sci_port(port); | |
1607 | ||
73a19e4c GL |
1608 | if (s->chan_tx) |
1609 | sci_tx_dma_release(s, false); | |
1610 | if (s->chan_rx) | |
1611 | sci_rx_dma_release(s, false); | |
1612 | } | |
27bd1075 PM |
1613 | #else |
1614 | static inline void sci_request_dma(struct uart_port *port) | |
1615 | { | |
1616 | } | |
1617 | ||
1618 | static inline void sci_free_dma(struct uart_port *port) | |
1619 | { | |
1620 | } | |
73a19e4c GL |
1621 | #endif |
1622 | ||
1da177e4 LT |
1623 | static int sci_startup(struct uart_port *port) |
1624 | { | |
a5660ada | 1625 | struct sci_port *s = to_sci_port(port); |
073e84c9 | 1626 | int ret; |
1da177e4 | 1627 | |
73a19e4c GL |
1628 | dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); |
1629 | ||
23241d43 | 1630 | sci_port_enable(s); |
1da177e4 | 1631 | |
073e84c9 PM |
1632 | ret = sci_request_irq(s); |
1633 | if (unlikely(ret < 0)) | |
1634 | return ret; | |
1635 | ||
73a19e4c | 1636 | sci_request_dma(port); |
073e84c9 | 1637 | |
d656901b | 1638 | sci_start_tx(port); |
73a19e4c | 1639 | sci_start_rx(port); |
1da177e4 LT |
1640 | |
1641 | return 0; | |
1642 | } | |
1643 | ||
1644 | static void sci_shutdown(struct uart_port *port) | |
1645 | { | |
a5660ada | 1646 | struct sci_port *s = to_sci_port(port); |
1da177e4 | 1647 | |
73a19e4c GL |
1648 | dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); |
1649 | ||
1da177e4 | 1650 | sci_stop_rx(port); |
b129a8cc | 1651 | sci_stop_tx(port); |
073e84c9 | 1652 | |
73a19e4c | 1653 | sci_free_dma(port); |
1da177e4 LT |
1654 | sci_free_irq(s); |
1655 | ||
23241d43 | 1656 | sci_port_disable(s); |
1da177e4 LT |
1657 | } |
1658 | ||
26c92f37 PM |
1659 | static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps, |
1660 | unsigned long freq) | |
1661 | { | |
1662 | switch (algo_id) { | |
1663 | case SCBRR_ALGO_1: | |
1664 | return ((freq + 16 * bps) / (16 * bps) - 1); | |
1665 | case SCBRR_ALGO_2: | |
1666 | return ((freq + 16 * bps) / (32 * bps) - 1); | |
1667 | case SCBRR_ALGO_3: | |
1668 | return (((freq * 2) + 16 * bps) / (16 * bps) - 1); | |
1669 | case SCBRR_ALGO_4: | |
1670 | return (((freq * 2) + 16 * bps) / (32 * bps) - 1); | |
1671 | case SCBRR_ALGO_5: | |
1672 | return (((freq * 1000 / 32) / bps) - 1); | |
1673 | } | |
1674 | ||
1675 | /* Warn, but use a safe default */ | |
1676 | WARN_ON(1); | |
e8183a6c | 1677 | |
26c92f37 PM |
1678 | return ((freq + 16 * bps) / (32 * bps) - 1); |
1679 | } | |
1680 | ||
1ba76220 MD |
1681 | static void sci_reset(struct uart_port *port) |
1682 | { | |
0979e0e6 | 1683 | struct plat_sci_reg *reg; |
1ba76220 MD |
1684 | unsigned int status; |
1685 | ||
1686 | do { | |
1687 | status = sci_in(port, SCxSR); | |
1688 | } while (!(status & SCxSR_TEND(port))); | |
1689 | ||
1690 | sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ | |
1691 | ||
0979e0e6 PM |
1692 | reg = sci_getreg(port, SCFCR); |
1693 | if (reg->size) | |
1ba76220 MD |
1694 | sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); |
1695 | } | |
1696 | ||
606d099c AC |
1697 | static void sci_set_termios(struct uart_port *port, struct ktermios *termios, |
1698 | struct ktermios *old) | |
1da177e4 | 1699 | { |
00b9de9c | 1700 | struct sci_port *s = to_sci_port(port); |
0979e0e6 | 1701 | struct plat_sci_reg *reg; |
1ba76220 | 1702 | unsigned int baud, smr_val, max_baud; |
a2159b52 | 1703 | int t = -1; |
1da177e4 | 1704 | |
154280fd MD |
1705 | /* |
1706 | * earlyprintk comes here early on with port->uartclk set to zero. | |
1707 | * the clock framework is not up and running at this point so here | |
1708 | * we assume that 115200 is the maximum baud rate. please note that | |
1709 | * the baud rate is not programmed during earlyprintk - it is assumed | |
1710 | * that the previous boot loader has enabled required clocks and | |
1711 | * setup the baud rate generator hardware for us already. | |
1712 | */ | |
1713 | max_baud = port->uartclk ? port->uartclk / 16 : 115200; | |
1da177e4 | 1714 | |
154280fd MD |
1715 | baud = uart_get_baud_rate(port, termios, old, 0, max_baud); |
1716 | if (likely(baud && port->uartclk)) | |
ce6738b6 | 1717 | t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud, port->uartclk); |
e108b2ca | 1718 | |
23241d43 | 1719 | sci_port_enable(s); |
36003386 | 1720 | |
1ba76220 | 1721 | sci_reset(port); |
1da177e4 LT |
1722 | |
1723 | smr_val = sci_in(port, SCSMR) & 3; | |
e8183a6c | 1724 | |
1da177e4 LT |
1725 | if ((termios->c_cflag & CSIZE) == CS7) |
1726 | smr_val |= 0x40; | |
1727 | if (termios->c_cflag & PARENB) | |
1728 | smr_val |= 0x20; | |
1729 | if (termios->c_cflag & PARODD) | |
1730 | smr_val |= 0x30; | |
1731 | if (termios->c_cflag & CSTOPB) | |
1732 | smr_val |= 0x08; | |
1733 | ||
1734 | uart_update_timeout(port, termios->c_cflag, baud); | |
1735 | ||
1736 | sci_out(port, SCSMR, smr_val); | |
1737 | ||
73a19e4c | 1738 | dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t, |
ce6738b6 | 1739 | s->cfg->scscr); |
73a19e4c | 1740 | |
1da177e4 | 1741 | if (t > 0) { |
e7c98dc7 | 1742 | if (t >= 256) { |
1da177e4 LT |
1743 | sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1); |
1744 | t >>= 2; | |
e7c98dc7 | 1745 | } else |
1da177e4 | 1746 | sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3); |
e7c98dc7 | 1747 | |
1da177e4 LT |
1748 | sci_out(port, SCBRR, t); |
1749 | udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */ | |
1750 | } | |
1751 | ||
d5701647 | 1752 | sci_init_pins(port, termios->c_cflag); |
0979e0e6 PM |
1753 | |
1754 | reg = sci_getreg(port, SCFCR); | |
1755 | if (reg->size) { | |
1756 | unsigned short ctrl; | |
1757 | ||
1758 | ctrl = sci_in(port, SCFCR); | |
1759 | if (termios->c_cflag & CRTSCTS) | |
1760 | ctrl |= SCFCR_MCE; | |
1761 | else | |
1762 | ctrl &= ~SCFCR_MCE; | |
1763 | sci_out(port, SCFCR, ctrl); | |
1764 | } | |
b7a76e4b | 1765 | |
ce6738b6 | 1766 | sci_out(port, SCSCR, s->cfg->scscr); |
1da177e4 | 1767 | |
3089f381 GL |
1768 | #ifdef CONFIG_SERIAL_SH_SCI_DMA |
1769 | /* | |
1770 | * Calculate delay for 1.5 DMA buffers: see | |
1771 | * drivers/serial/serial_core.c::uart_update_timeout(). With 10 bits | |
1772 | * (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function | |
1773 | * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)." | |
1774 | * Then below we calculate 3 jiffies (12ms) for 1.5 DMA buffers (3 FIFO | |
1775 | * sizes), but it has been found out experimentally, that this is not | |
1776 | * enough: the driver too often needlessly runs on a DMA timeout. 20ms | |
1777 | * as a minimum seem to work perfectly. | |
1778 | */ | |
1779 | if (s->chan_rx) { | |
1780 | s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 / | |
1781 | port->fifosize / 2; | |
1782 | dev_dbg(port->dev, | |
1783 | "DMA Rx t-out %ums, tty t-out %u jiffies\n", | |
1784 | s->rx_timeout * 1000 / HZ, port->timeout); | |
1785 | if (s->rx_timeout < msecs_to_jiffies(20)) | |
1786 | s->rx_timeout = msecs_to_jiffies(20); | |
1787 | } | |
1788 | #endif | |
1789 | ||
1da177e4 | 1790 | if ((termios->c_cflag & CREAD) != 0) |
73a19e4c | 1791 | sci_start_rx(port); |
36003386 | 1792 | |
23241d43 | 1793 | sci_port_disable(s); |
1da177e4 LT |
1794 | } |
1795 | ||
1796 | static const char *sci_type(struct uart_port *port) | |
1797 | { | |
1798 | switch (port->type) { | |
e7c98dc7 MT |
1799 | case PORT_IRDA: |
1800 | return "irda"; | |
1801 | case PORT_SCI: | |
1802 | return "sci"; | |
1803 | case PORT_SCIF: | |
1804 | return "scif"; | |
1805 | case PORT_SCIFA: | |
1806 | return "scifa"; | |
d1d4b10c GL |
1807 | case PORT_SCIFB: |
1808 | return "scifb"; | |
1da177e4 LT |
1809 | } |
1810 | ||
fa43972f | 1811 | return NULL; |
1da177e4 LT |
1812 | } |
1813 | ||
e2651647 | 1814 | static inline unsigned long sci_port_size(struct uart_port *port) |
1da177e4 | 1815 | { |
e2651647 PM |
1816 | /* |
1817 | * Pick an arbitrary size that encapsulates all of the base | |
1818 | * registers by default. This can be optimized later, or derived | |
1819 | * from platform resource data at such a time that ports begin to | |
1820 | * behave more erratically. | |
1821 | */ | |
1822 | return 64; | |
1da177e4 LT |
1823 | } |
1824 | ||
f6e9495d PM |
1825 | static int sci_remap_port(struct uart_port *port) |
1826 | { | |
1827 | unsigned long size = sci_port_size(port); | |
1828 | ||
1829 | /* | |
1830 | * Nothing to do if there's already an established membase. | |
1831 | */ | |
1832 | if (port->membase) | |
1833 | return 0; | |
1834 | ||
1835 | if (port->flags & UPF_IOREMAP) { | |
1836 | port->membase = ioremap_nocache(port->mapbase, size); | |
1837 | if (unlikely(!port->membase)) { | |
1838 | dev_err(port->dev, "can't remap port#%d\n", port->line); | |
1839 | return -ENXIO; | |
1840 | } | |
1841 | } else { | |
1842 | /* | |
1843 | * For the simple (and majority of) cases where we don't | |
1844 | * need to do any remapping, just cast the cookie | |
1845 | * directly. | |
1846 | */ | |
1847 | port->membase = (void __iomem *)port->mapbase; | |
1848 | } | |
1849 | ||
1850 | return 0; | |
1851 | } | |
1852 | ||
e2651647 | 1853 | static void sci_release_port(struct uart_port *port) |
1da177e4 | 1854 | { |
e2651647 PM |
1855 | if (port->flags & UPF_IOREMAP) { |
1856 | iounmap(port->membase); | |
1857 | port->membase = NULL; | |
1858 | } | |
1859 | ||
1860 | release_mem_region(port->mapbase, sci_port_size(port)); | |
1da177e4 LT |
1861 | } |
1862 | ||
e2651647 | 1863 | static int sci_request_port(struct uart_port *port) |
1da177e4 | 1864 | { |
e2651647 PM |
1865 | unsigned long size = sci_port_size(port); |
1866 | struct resource *res; | |
f6e9495d | 1867 | int ret; |
1da177e4 | 1868 | |
1020520e | 1869 | res = request_mem_region(port->mapbase, size, dev_name(port->dev)); |
e2651647 PM |
1870 | if (unlikely(res == NULL)) |
1871 | return -EBUSY; | |
1da177e4 | 1872 | |
f6e9495d PM |
1873 | ret = sci_remap_port(port); |
1874 | if (unlikely(ret != 0)) { | |
1875 | release_resource(res); | |
1876 | return ret; | |
7ff731ae | 1877 | } |
e2651647 PM |
1878 | |
1879 | return 0; | |
1880 | } | |
1881 | ||
1882 | static void sci_config_port(struct uart_port *port, int flags) | |
1883 | { | |
1884 | if (flags & UART_CONFIG_TYPE) { | |
1885 | struct sci_port *sport = to_sci_port(port); | |
1886 | ||
1887 | port->type = sport->cfg->type; | |
1888 | sci_request_port(port); | |
1889 | } | |
1da177e4 LT |
1890 | } |
1891 | ||
1892 | static int sci_verify_port(struct uart_port *port, struct serial_struct *ser) | |
1893 | { | |
a5660ada | 1894 | struct sci_port *s = to_sci_port(port); |
1da177e4 | 1895 | |
ce6738b6 | 1896 | if (ser->irq != s->cfg->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs) |
1da177e4 LT |
1897 | return -EINVAL; |
1898 | if (ser->baud_base < 2400) | |
1899 | /* No paper tape reader for Mitch.. */ | |
1900 | return -EINVAL; | |
1901 | ||
1902 | return 0; | |
1903 | } | |
1904 | ||
1905 | static struct uart_ops sci_uart_ops = { | |
1906 | .tx_empty = sci_tx_empty, | |
1907 | .set_mctrl = sci_set_mctrl, | |
1908 | .get_mctrl = sci_get_mctrl, | |
1909 | .start_tx = sci_start_tx, | |
1910 | .stop_tx = sci_stop_tx, | |
1911 | .stop_rx = sci_stop_rx, | |
1912 | .enable_ms = sci_enable_ms, | |
1913 | .break_ctl = sci_break_ctl, | |
1914 | .startup = sci_startup, | |
1915 | .shutdown = sci_shutdown, | |
1916 | .set_termios = sci_set_termios, | |
1917 | .type = sci_type, | |
1918 | .release_port = sci_release_port, | |
1919 | .request_port = sci_request_port, | |
1920 | .config_port = sci_config_port, | |
1921 | .verify_port = sci_verify_port, | |
07d2a1a1 PM |
1922 | #ifdef CONFIG_CONSOLE_POLL |
1923 | .poll_get_char = sci_poll_get_char, | |
1924 | .poll_put_char = sci_poll_put_char, | |
1925 | #endif | |
1da177e4 LT |
1926 | }; |
1927 | ||
c7ed1ab3 PM |
1928 | static int __devinit sci_init_single(struct platform_device *dev, |
1929 | struct sci_port *sci_port, | |
1930 | unsigned int index, | |
1931 | struct plat_sci_port *p) | |
e108b2ca | 1932 | { |
73a19e4c | 1933 | struct uart_port *port = &sci_port->port; |
3127c6b2 | 1934 | int ret; |
e108b2ca | 1935 | |
73a19e4c GL |
1936 | port->ops = &sci_uart_ops; |
1937 | port->iotype = UPIO_MEM; | |
1938 | port->line = index; | |
75136d48 MP |
1939 | |
1940 | switch (p->type) { | |
d1d4b10c GL |
1941 | case PORT_SCIFB: |
1942 | port->fifosize = 256; | |
1943 | break; | |
75136d48 | 1944 | case PORT_SCIFA: |
73a19e4c | 1945 | port->fifosize = 64; |
75136d48 MP |
1946 | break; |
1947 | case PORT_SCIF: | |
73a19e4c | 1948 | port->fifosize = 16; |
75136d48 MP |
1949 | break; |
1950 | default: | |
73a19e4c | 1951 | port->fifosize = 1; |
75136d48 MP |
1952 | break; |
1953 | } | |
7b6fd3bf | 1954 | |
3127c6b2 PM |
1955 | if (p->regtype == SCIx_PROBE_REGTYPE) { |
1956 | ret = sci_probe_regmap(p); | |
fc97114b | 1957 | if (unlikely(ret)) |
3127c6b2 PM |
1958 | return ret; |
1959 | } | |
61a6976b | 1960 | |
7b6fd3bf | 1961 | if (dev) { |
c7ed1ab3 PM |
1962 | sci_port->iclk = clk_get(&dev->dev, "sci_ick"); |
1963 | if (IS_ERR(sci_port->iclk)) { | |
1964 | sci_port->iclk = clk_get(&dev->dev, "peripheral_clk"); | |
1965 | if (IS_ERR(sci_port->iclk)) { | |
1966 | dev_err(&dev->dev, "can't get iclk\n"); | |
1967 | return PTR_ERR(sci_port->iclk); | |
1968 | } | |
1969 | } | |
1970 | ||
1971 | /* | |
1972 | * The function clock is optional, ignore it if we can't | |
1973 | * find it. | |
1974 | */ | |
1975 | sci_port->fclk = clk_get(&dev->dev, "sci_fck"); | |
1976 | if (IS_ERR(sci_port->fclk)) | |
1977 | sci_port->fclk = NULL; | |
1978 | ||
73a19e4c | 1979 | port->dev = &dev->dev; |
5e50d2d6 | 1980 | |
5a50a01b | 1981 | pm_runtime_irq_safe(&dev->dev); |
5e50d2d6 | 1982 | pm_runtime_enable(&dev->dev); |
7b6fd3bf | 1983 | } |
e108b2ca | 1984 | |
7ed7e071 MD |
1985 | sci_port->break_timer.data = (unsigned long)sci_port; |
1986 | sci_port->break_timer.function = sci_break_timer; | |
1987 | init_timer(&sci_port->break_timer); | |
1988 | ||
debf9507 PM |
1989 | /* |
1990 | * Establish some sensible defaults for the error detection. | |
1991 | */ | |
1992 | if (!p->error_mask) | |
1993 | p->error_mask = (p->type == PORT_SCI) ? | |
1994 | SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK; | |
1995 | ||
1996 | /* | |
1997 | * Establish sensible defaults for the overrun detection, unless | |
1998 | * the part has explicitly disabled support for it. | |
1999 | */ | |
2000 | if (p->overrun_bit != SCIx_NOT_SUPPORTED) { | |
2001 | if (p->type == PORT_SCI) | |
2002 | p->overrun_bit = 5; | |
2003 | else if (p->scbrr_algo_id == SCBRR_ALGO_4) | |
2004 | p->overrun_bit = 9; | |
2005 | else | |
2006 | p->overrun_bit = 0; | |
2007 | ||
2008 | /* | |
2009 | * Make the error mask inclusive of overrun detection, if | |
2010 | * supported. | |
2011 | */ | |
2012 | p->error_mask |= (1 << p->overrun_bit); | |
2013 | } | |
2014 | ||
ce6738b6 | 2015 | sci_port->cfg = p; |
7ed7e071 | 2016 | |
ce6738b6 PM |
2017 | port->mapbase = p->mapbase; |
2018 | port->type = p->type; | |
f43dc23d | 2019 | port->flags = p->flags; |
61a6976b | 2020 | port->regshift = p->regshift; |
73a19e4c | 2021 | |
ce6738b6 | 2022 | /* |
61a6976b | 2023 | * The UART port needs an IRQ value, so we peg this to the RX IRQ |
ce6738b6 PM |
2024 | * for the multi-IRQ ports, which is where we are primarily |
2025 | * concerned with the shutdown path synchronization. | |
2026 | * | |
2027 | * For the muxed case there's nothing more to do. | |
2028 | */ | |
54aa89ea | 2029 | port->irq = p->irqs[SCIx_RXI_IRQ]; |
9cfb5c05 | 2030 | port->irqflags = 0; |
73a19e4c | 2031 | |
61a6976b PM |
2032 | port->serial_in = sci_serial_in; |
2033 | port->serial_out = sci_serial_out; | |
2034 | ||
937bb6e4 GL |
2035 | if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) |
2036 | dev_dbg(port->dev, "DMA tx %d, rx %d\n", | |
2037 | p->dma_slave_tx, p->dma_slave_rx); | |
7ed7e071 | 2038 | |
c7ed1ab3 | 2039 | return 0; |
e108b2ca PM |
2040 | } |
2041 | ||
1da177e4 | 2042 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE |
dc8e6f5b MD |
2043 | static void serial_console_putchar(struct uart_port *port, int ch) |
2044 | { | |
2045 | sci_poll_put_char(port, ch); | |
2046 | } | |
2047 | ||
1da177e4 LT |
2048 | /* |
2049 | * Print a string to the serial port trying not to disturb | |
2050 | * any possible real use of the port... | |
2051 | */ | |
2052 | static void serial_console_write(struct console *co, const char *s, | |
2053 | unsigned count) | |
2054 | { | |
906b17dc PM |
2055 | struct sci_port *sci_port = &sci_ports[co->index]; |
2056 | struct uart_port *port = &sci_port->port; | |
973e5d52 | 2057 | unsigned short bits; |
07d2a1a1 | 2058 | |
23241d43 | 2059 | sci_port_enable(sci_port); |
501b825d MD |
2060 | |
2061 | uart_console_write(port, s, count, serial_console_putchar); | |
973e5d52 MD |
2062 | |
2063 | /* wait until fifo is empty and last bit has been transmitted */ | |
2064 | bits = SCxSR_TDxE(port) | SCxSR_TEND(port); | |
2065 | while ((sci_in(port, SCxSR) & bits) != bits) | |
2066 | cpu_relax(); | |
501b825d | 2067 | |
23241d43 | 2068 | sci_port_disable(sci_port); |
1da177e4 LT |
2069 | } |
2070 | ||
7b6fd3bf | 2071 | static int __devinit serial_console_setup(struct console *co, char *options) |
1da177e4 | 2072 | { |
dc8e6f5b | 2073 | struct sci_port *sci_port; |
1da177e4 LT |
2074 | struct uart_port *port; |
2075 | int baud = 115200; | |
2076 | int bits = 8; | |
2077 | int parity = 'n'; | |
2078 | int flow = 'n'; | |
2079 | int ret; | |
2080 | ||
e108b2ca | 2081 | /* |
906b17dc | 2082 | * Refuse to handle any bogus ports. |
1da177e4 | 2083 | */ |
906b17dc | 2084 | if (co->index < 0 || co->index >= SCI_NPORTS) |
e108b2ca | 2085 | return -ENODEV; |
e108b2ca | 2086 | |
906b17dc PM |
2087 | sci_port = &sci_ports[co->index]; |
2088 | port = &sci_port->port; | |
2089 | ||
b2267a6b AC |
2090 | /* |
2091 | * Refuse to handle uninitialized ports. | |
2092 | */ | |
2093 | if (!port->ops) | |
2094 | return -ENODEV; | |
2095 | ||
f6e9495d PM |
2096 | ret = sci_remap_port(port); |
2097 | if (unlikely(ret != 0)) | |
2098 | return ret; | |
e108b2ca | 2099 | |
23241d43 | 2100 | sci_port_enable(sci_port); |
b7a76e4b | 2101 | |
1da177e4 LT |
2102 | if (options) |
2103 | uart_parse_options(options, &baud, &parity, &bits, &flow); | |
2104 | ||
1ba76220 MD |
2105 | sci_port_disable(sci_port); |
2106 | ||
ab7cfb55 | 2107 | return uart_set_options(port, co, baud, parity, bits, flow); |
1da177e4 LT |
2108 | } |
2109 | ||
2110 | static struct console serial_console = { | |
2111 | .name = "ttySC", | |
906b17dc | 2112 | .device = uart_console_device, |
1da177e4 LT |
2113 | .write = serial_console_write, |
2114 | .setup = serial_console_setup, | |
fa5da2f7 | 2115 | .flags = CON_PRINTBUFFER, |
1da177e4 | 2116 | .index = -1, |
906b17dc | 2117 | .data = &sci_uart_driver, |
1da177e4 LT |
2118 | }; |
2119 | ||
7b6fd3bf MD |
2120 | static struct console early_serial_console = { |
2121 | .name = "early_ttySC", | |
2122 | .write = serial_console_write, | |
2123 | .flags = CON_PRINTBUFFER, | |
906b17dc | 2124 | .index = -1, |
7b6fd3bf | 2125 | }; |
ecdf8a46 | 2126 | |
7b6fd3bf MD |
2127 | static char early_serial_buf[32]; |
2128 | ||
ecdf8a46 PM |
2129 | static int __devinit sci_probe_earlyprintk(struct platform_device *pdev) |
2130 | { | |
2131 | struct plat_sci_port *cfg = pdev->dev.platform_data; | |
2132 | ||
2133 | if (early_serial_console.data) | |
2134 | return -EEXIST; | |
2135 | ||
2136 | early_serial_console.index = pdev->id; | |
ecdf8a46 | 2137 | |
906b17dc | 2138 | sci_init_single(NULL, &sci_ports[pdev->id], pdev->id, cfg); |
ecdf8a46 PM |
2139 | |
2140 | serial_console_setup(&early_serial_console, early_serial_buf); | |
2141 | ||
2142 | if (!strstr(early_serial_buf, "keep")) | |
2143 | early_serial_console.flags |= CON_BOOT; | |
2144 | ||
2145 | register_console(&early_serial_console); | |
2146 | return 0; | |
2147 | } | |
6a8c9799 | 2148 | |
1ba76220 MD |
2149 | #define uart_console(port) ((port)->cons->index == (port)->line) |
2150 | ||
2151 | static int sci_runtime_suspend(struct device *dev) | |
2152 | { | |
2153 | struct sci_port *sci_port = dev_get_drvdata(dev); | |
2154 | struct uart_port *port = &sci_port->port; | |
2155 | ||
2156 | if (uart_console(port)) { | |
0979e0e6 PM |
2157 | struct plat_sci_reg *reg; |
2158 | ||
1ba76220 MD |
2159 | sci_port->saved_smr = sci_in(port, SCSMR); |
2160 | sci_port->saved_brr = sci_in(port, SCBRR); | |
0979e0e6 PM |
2161 | |
2162 | reg = sci_getreg(port, SCFCR); | |
2163 | if (reg->size) | |
2164 | sci_port->saved_fcr = sci_in(port, SCFCR); | |
2165 | else | |
2166 | sci_port->saved_fcr = 0; | |
1ba76220 MD |
2167 | } |
2168 | return 0; | |
2169 | } | |
2170 | ||
2171 | static int sci_runtime_resume(struct device *dev) | |
2172 | { | |
2173 | struct sci_port *sci_port = dev_get_drvdata(dev); | |
2174 | struct uart_port *port = &sci_port->port; | |
2175 | ||
2176 | if (uart_console(port)) { | |
2177 | sci_reset(port); | |
2178 | sci_out(port, SCSMR, sci_port->saved_smr); | |
2179 | sci_out(port, SCBRR, sci_port->saved_brr); | |
0979e0e6 PM |
2180 | |
2181 | if (sci_port->saved_fcr) | |
2182 | sci_out(port, SCFCR, sci_port->saved_fcr); | |
2183 | ||
1ba76220 MD |
2184 | sci_out(port, SCSCR, sci_port->cfg->scscr); |
2185 | } | |
2186 | return 0; | |
2187 | } | |
2188 | ||
6a8c9799 NI |
2189 | #define SCI_CONSOLE (&serial_console) |
2190 | ||
ecdf8a46 PM |
2191 | #else |
2192 | static inline int __devinit sci_probe_earlyprintk(struct platform_device *pdev) | |
2193 | { | |
2194 | return -EINVAL; | |
2195 | } | |
1da177e4 | 2196 | |
6a8c9799 | 2197 | #define SCI_CONSOLE NULL |
1ba76220 MD |
2198 | #define sci_runtime_suspend NULL |
2199 | #define sci_runtime_resume NULL | |
6a8c9799 NI |
2200 | |
2201 | #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ | |
1da177e4 LT |
2202 | |
2203 | static char banner[] __initdata = | |
2204 | KERN_INFO "SuperH SCI(F) driver initialized\n"; | |
2205 | ||
2206 | static struct uart_driver sci_uart_driver = { | |
2207 | .owner = THIS_MODULE, | |
2208 | .driver_name = "sci", | |
1da177e4 LT |
2209 | .dev_name = "ttySC", |
2210 | .major = SCI_MAJOR, | |
2211 | .minor = SCI_MINOR_START, | |
e108b2ca | 2212 | .nr = SCI_NPORTS, |
1da177e4 LT |
2213 | .cons = SCI_CONSOLE, |
2214 | }; | |
2215 | ||
54507f6e | 2216 | static int sci_remove(struct platform_device *dev) |
e552de24 | 2217 | { |
d535a230 | 2218 | struct sci_port *port = platform_get_drvdata(dev); |
e552de24 | 2219 | |
d535a230 PM |
2220 | cpufreq_unregister_notifier(&port->freq_transition, |
2221 | CPUFREQ_TRANSITION_NOTIFIER); | |
e552de24 | 2222 | |
d535a230 PM |
2223 | uart_remove_one_port(&sci_uart_driver, &port->port); |
2224 | ||
2225 | clk_put(port->iclk); | |
2226 | clk_put(port->fclk); | |
e552de24 | 2227 | |
5e50d2d6 | 2228 | pm_runtime_disable(&dev->dev); |
e552de24 MD |
2229 | return 0; |
2230 | } | |
2231 | ||
0ee70712 MD |
2232 | static int __devinit sci_probe_single(struct platform_device *dev, |
2233 | unsigned int index, | |
2234 | struct plat_sci_port *p, | |
2235 | struct sci_port *sciport) | |
2236 | { | |
0ee70712 MD |
2237 | int ret; |
2238 | ||
2239 | /* Sanity check */ | |
2240 | if (unlikely(index >= SCI_NPORTS)) { | |
2241 | dev_notice(&dev->dev, "Attempting to register port " | |
2242 | "%d when only %d are available.\n", | |
2243 | index+1, SCI_NPORTS); | |
2244 | dev_notice(&dev->dev, "Consider bumping " | |
2245 | "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); | |
2246 | return 0; | |
2247 | } | |
2248 | ||
c7ed1ab3 PM |
2249 | ret = sci_init_single(dev, sciport, index, p); |
2250 | if (ret) | |
2251 | return ret; | |
0ee70712 | 2252 | |
d535a230 | 2253 | return uart_add_one_port(&sci_uart_driver, &sciport->port); |
0ee70712 MD |
2254 | } |
2255 | ||
e108b2ca | 2256 | static int __devinit sci_probe(struct platform_device *dev) |
1da177e4 | 2257 | { |
e108b2ca | 2258 | struct plat_sci_port *p = dev->dev.platform_data; |
d535a230 | 2259 | struct sci_port *sp = &sci_ports[dev->id]; |
ecdf8a46 | 2260 | int ret; |
d535a230 | 2261 | |
ecdf8a46 PM |
2262 | /* |
2263 | * If we've come here via earlyprintk initialization, head off to | |
2264 | * the special early probe. We don't have sufficient device state | |
2265 | * to make it beyond this yet. | |
2266 | */ | |
2267 | if (is_early_platform_device(dev)) | |
2268 | return sci_probe_earlyprintk(dev); | |
7b6fd3bf | 2269 | |
d535a230 | 2270 | platform_set_drvdata(dev, sp); |
e552de24 | 2271 | |
906b17dc | 2272 | ret = sci_probe_single(dev, dev->id, p, sp); |
d535a230 PM |
2273 | if (ret) |
2274 | goto err_unreg; | |
e552de24 | 2275 | |
d535a230 | 2276 | sp->freq_transition.notifier_call = sci_notifier; |
1da177e4 | 2277 | |
d535a230 PM |
2278 | ret = cpufreq_register_notifier(&sp->freq_transition, |
2279 | CPUFREQ_TRANSITION_NOTIFIER); | |
2280 | if (unlikely(ret < 0)) | |
2281 | goto err_unreg; | |
1da177e4 LT |
2282 | |
2283 | #ifdef CONFIG_SH_STANDARD_BIOS | |
2284 | sh_bios_gdb_detach(); | |
2285 | #endif | |
2286 | ||
e108b2ca | 2287 | return 0; |
7ff731ae PM |
2288 | |
2289 | err_unreg: | |
e552de24 | 2290 | sci_remove(dev); |
7ff731ae | 2291 | return ret; |
1da177e4 LT |
2292 | } |
2293 | ||
6daa79b3 | 2294 | static int sci_suspend(struct device *dev) |
1da177e4 | 2295 | { |
d535a230 | 2296 | struct sci_port *sport = dev_get_drvdata(dev); |
e108b2ca | 2297 | |
d535a230 PM |
2298 | if (sport) |
2299 | uart_suspend_port(&sci_uart_driver, &sport->port); | |
1da177e4 | 2300 | |
e108b2ca PM |
2301 | return 0; |
2302 | } | |
1da177e4 | 2303 | |
6daa79b3 | 2304 | static int sci_resume(struct device *dev) |
e108b2ca | 2305 | { |
d535a230 | 2306 | struct sci_port *sport = dev_get_drvdata(dev); |
e108b2ca | 2307 | |
d535a230 PM |
2308 | if (sport) |
2309 | uart_resume_port(&sci_uart_driver, &sport->port); | |
e108b2ca PM |
2310 | |
2311 | return 0; | |
2312 | } | |
2313 | ||
47145210 | 2314 | static const struct dev_pm_ops sci_dev_pm_ops = { |
1ba76220 MD |
2315 | .runtime_suspend = sci_runtime_suspend, |
2316 | .runtime_resume = sci_runtime_resume, | |
6daa79b3 PM |
2317 | .suspend = sci_suspend, |
2318 | .resume = sci_resume, | |
2319 | }; | |
2320 | ||
e108b2ca PM |
2321 | static struct platform_driver sci_driver = { |
2322 | .probe = sci_probe, | |
b9e39c89 | 2323 | .remove = sci_remove, |
e108b2ca PM |
2324 | .driver = { |
2325 | .name = "sh-sci", | |
2326 | .owner = THIS_MODULE, | |
6daa79b3 | 2327 | .pm = &sci_dev_pm_ops, |
e108b2ca PM |
2328 | }, |
2329 | }; | |
2330 | ||
2331 | static int __init sci_init(void) | |
2332 | { | |
2333 | int ret; | |
2334 | ||
2335 | printk(banner); | |
2336 | ||
e108b2ca PM |
2337 | ret = uart_register_driver(&sci_uart_driver); |
2338 | if (likely(ret == 0)) { | |
2339 | ret = platform_driver_register(&sci_driver); | |
2340 | if (unlikely(ret)) | |
2341 | uart_unregister_driver(&sci_uart_driver); | |
2342 | } | |
2343 | ||
2344 | return ret; | |
2345 | } | |
2346 | ||
2347 | static void __exit sci_exit(void) | |
2348 | { | |
2349 | platform_driver_unregister(&sci_driver); | |
1da177e4 LT |
2350 | uart_unregister_driver(&sci_uart_driver); |
2351 | } | |
2352 | ||
7b6fd3bf MD |
2353 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE |
2354 | early_platform_init_buffer("earlyprintk", &sci_driver, | |
2355 | early_serial_buf, ARRAY_SIZE(early_serial_buf)); | |
2356 | #endif | |
1da177e4 LT |
2357 | module_init(sci_init); |
2358 | module_exit(sci_exit); | |
2359 | ||
e108b2ca | 2360 | MODULE_LICENSE("GPL"); |
e169c139 | 2361 | MODULE_ALIAS("platform:sh-sci"); |
7f405f9c PM |
2362 | MODULE_AUTHOR("Paul Mundt"); |
2363 | MODULE_DESCRIPTION("SuperH SCI(F) serial driver"); |