Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # USB Gadget support on a system involves | |
3 | # (a) a peripheral controller, and | |
4 | # (b) the gadget driver using it. | |
5 | # | |
6 | # NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !! | |
7 | # | |
8 | # - Host systems (like PCs) need CONFIG_USB (with "A" jacks). | |
9 | # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). | |
cab00891 | 10 | # - Some systems have both kinds of controllers. |
1da177e4 LT |
11 | # |
12 | # With help from a special transceiver and a "Mini-AB" jack, systems with | |
13 | # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). | |
14 | # | |
15 | menu "USB Gadget Support" | |
16 | ||
17 | config USB_GADGET | |
18 | tristate "Support for USB Gadgets" | |
19 | help | |
20 | USB is a master/slave protocol, organized with one master | |
21 | host (such as a PC) controlling up to 127 peripheral devices. | |
22 | The USB hardware is asymmetric, which makes it easier to set up: | |
23 | you can't connect a "to-the-host" connector to a peripheral. | |
24 | ||
25 | Linux can run in the host, or in the peripheral. In both cases | |
26 | you need a low level bus controller driver, and some software | |
27 | talking to it. Peripheral controllers are often discrete silicon, | |
28 | or are integrated with the CPU in a microcontroller. The more | |
e113f29c | 29 | familiar host side controllers have names like "EHCI", "OHCI", |
1da177e4 LT |
30 | or "UHCI", and are usually integrated into southbridges on PC |
31 | motherboards. | |
32 | ||
33 | Enable this configuration option if you want to run Linux inside | |
34 | a USB peripheral device. Configure one hardware driver for your | |
35 | peripheral/device side bus controller, and a "gadget driver" for | |
36 | your peripheral protocol. (If you use modular gadget drivers, | |
37 | you may configure more than one.) | |
38 | ||
39 | If in doubt, say "N" and don't enable these drivers; most people | |
40 | don't have this kind of hardware (except maybe inside Linux PDAs). | |
41 | ||
42 | For more information, see <http://www.linux-usb.org/gadget> and | |
43 | the kernel DocBook documentation for this API. | |
44 | ||
45 | config USB_GADGET_DEBUG_FILES | |
46 | boolean "Debugging information files" | |
47 | depends on USB_GADGET && PROC_FS | |
48 | help | |
49 | Some of the drivers in the "gadget" framework can expose | |
50 | debugging information in files such as /proc/driver/udc | |
51 | (for a peripheral controller). The information in these | |
52 | files may help when you're troubleshooting or bringing up a | |
53 | driver on a new board. Enable these files by choosing "Y" | |
54 | here. If in doubt, or to conserve kernel memory, say "N". | |
55 | ||
028b271b DB |
56 | config USB_GADGET_SELECTED |
57 | boolean | |
58 | ||
1da177e4 LT |
59 | # |
60 | # USB Peripheral Controller Support | |
61 | # | |
62 | choice | |
63 | prompt "USB Peripheral Controller" | |
64 | depends on USB_GADGET | |
65 | help | |
66 | A USB device uses a controller to talk to its host. | |
67 | Systems should have only one such upstream link. | |
68 | Many controller drivers are platform-specific; these | |
69 | often need board-specific hooks. | |
70 | ||
b504882d LY |
71 | config USB_GADGET_FSL_USB2 |
72 | boolean "Freescale Highspeed USB DR Peripheral Controller" | |
73 | depends on MPC834x || PPC_MPC831x | |
74 | select USB_GADGET_DUALSPEED | |
75 | help | |
76 | Some of Freescale PowerPC processors have a High Speed | |
77 | Dual-Role(DR) USB controller, which supports device mode. | |
78 | ||
79 | The number of programmable endpoints is different through | |
80 | SOC revisions. | |
81 | ||
82 | Say "y" to link the driver statically, or "m" to build a | |
83 | dynamically linked module called "fsl_usb2_udc" and force | |
84 | all gadget drivers to also be dynamically linked. | |
85 | ||
86 | config USB_FSL_USB2 | |
87 | tristate | |
88 | depends on USB_GADGET_FSL_USB2 | |
89 | default USB_GADGET | |
90 | select USB_GADGET_SELECTED | |
91 | ||
1da177e4 | 92 | config USB_GADGET_NET2280 |
950ee4c8 | 93 | boolean "NetChip 228x" |
1da177e4 LT |
94 | depends on PCI |
95 | select USB_GADGET_DUALSPEED | |
96 | help | |
950ee4c8 | 97 | NetChip 2280 / 2282 is a PCI based USB peripheral controller which |
1da177e4 LT |
98 | supports both full and high speed USB 2.0 data transfers. |
99 | ||
100 | It has six configurable endpoints, as well as endpoint zero | |
101 | (for control transfers) and several endpoints with dedicated | |
102 | functions. | |
103 | ||
104 | Say "y" to link the driver statically, or "m" to build a | |
105 | dynamically linked module called "net2280" and force all | |
106 | gadget drivers to also be dynamically linked. | |
107 | ||
108 | config USB_NET2280 | |
109 | tristate | |
110 | depends on USB_GADGET_NET2280 | |
111 | default USB_GADGET | |
028b271b | 112 | select USB_GADGET_SELECTED |
1da177e4 LT |
113 | |
114 | config USB_GADGET_PXA2XX | |
115 | boolean "PXA 25x or IXP 4xx" | |
116 | depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX | |
117 | help | |
118 | Intel's PXA 25x series XScale ARM-5TE processors include | |
119 | an integrated full speed USB 1.1 device controller. The | |
120 | controller in the IXP 4xx series is register-compatible. | |
121 | ||
122 | It has fifteen fixed-function endpoints, as well as endpoint | |
123 | zero (for control transfers). | |
124 | ||
125 | Say "y" to link the driver statically, or "m" to build a | |
126 | dynamically linked module called "pxa2xx_udc" and force all | |
127 | gadget drivers to also be dynamically linked. | |
128 | ||
129 | config USB_PXA2XX | |
130 | tristate | |
131 | depends on USB_GADGET_PXA2XX | |
132 | default USB_GADGET | |
028b271b | 133 | select USB_GADGET_SELECTED |
1da177e4 LT |
134 | |
135 | # if there's only one gadget driver, using only two bulk endpoints, | |
136 | # don't waste memory for the other endpoints | |
137 | config USB_PXA2XX_SMALL | |
138 | depends on USB_GADGET_PXA2XX | |
139 | bool | |
140 | default n if USB_ETH_RNDIS | |
141 | default y if USB_ZERO | |
142 | default y if USB_ETH | |
143 | default y if USB_G_SERIAL | |
144 | ||
145 | config USB_GADGET_GOKU | |
146 | boolean "Toshiba TC86C001 'Goku-S'" | |
147 | depends on PCI | |
148 | help | |
149 | The Toshiba TC86C001 is a PCI device which includes controllers | |
150 | for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI). | |
151 | ||
152 | The device controller has three configurable (bulk or interrupt) | |
153 | endpoints, plus endpoint zero (for control transfers). | |
154 | ||
155 | Say "y" to link the driver statically, or "m" to build a | |
156 | dynamically linked module called "goku_udc" and to force all | |
157 | gadget drivers to also be dynamically linked. | |
158 | ||
159 | config USB_GOKU | |
160 | tristate | |
161 | depends on USB_GADGET_GOKU | |
162 | default USB_GADGET | |
028b271b | 163 | select USB_GADGET_SELECTED |
1da177e4 LT |
164 | |
165 | ||
166 | config USB_GADGET_LH7A40X | |
167 | boolean "LH7A40X" | |
168 | depends on ARCH_LH7A40X | |
169 | help | |
170 | This driver provides USB Device Controller driver for LH7A40x | |
171 | ||
172 | config USB_LH7A40X | |
173 | tristate | |
174 | depends on USB_GADGET_LH7A40X | |
175 | default USB_GADGET | |
028b271b | 176 | select USB_GADGET_SELECTED |
1da177e4 LT |
177 | |
178 | ||
179 | config USB_GADGET_OMAP | |
180 | boolean "OMAP USB Device Controller" | |
181 | depends on ARCH_OMAP | |
182 | select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 | |
183 | help | |
184 | Many Texas Instruments OMAP processors have flexible full | |
185 | speed USB device controllers, with support for up to 30 | |
186 | endpoints (plus endpoint zero). This driver supports the | |
187 | controller in the OMAP 1611, and should work with controllers | |
188 | in other OMAP processors too, given minor tweaks. | |
189 | ||
190 | Say "y" to link the driver statically, or "m" to build a | |
191 | dynamically linked module called "omap_udc" and force all | |
192 | gadget drivers to also be dynamically linked. | |
193 | ||
194 | config USB_OMAP | |
195 | tristate | |
196 | depends on USB_GADGET_OMAP | |
197 | default USB_GADGET | |
028b271b | 198 | select USB_GADGET_SELECTED |
1da177e4 LT |
199 | |
200 | config USB_OTG | |
201 | boolean "OTG Support" | |
202 | depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD | |
203 | help | |
204 | The most notable feature of USB OTG is support for a | |
205 | "Dual-Role" device, which can act as either a device | |
206 | or a host. The initial role choice can be changed | |
207 | later, when two dual-role devices talk to each other. | |
208 | ||
209 | Select this only if your OMAP board has a Mini-AB connector. | |
210 | ||
bae4bd84 DB |
211 | config USB_GADGET_AT91 |
212 | boolean "AT91 USB Device Port" | |
877d7720 | 213 | depends on ARCH_AT91 && !ARCH_AT91SAM9RL |
bae4bd84 DB |
214 | select USB_GADGET_SELECTED |
215 | help | |
216 | Many Atmel AT91 processors (such as the AT91RM2000) have a | |
217 | full speed USB Device Port with support for five configurable | |
218 | endpoints (plus endpoint zero). | |
219 | ||
220 | Say "y" to link the driver statically, or "m" to build a | |
221 | dynamically linked module called "at91_udc" and force all | |
222 | gadget drivers to also be dynamically linked. | |
223 | ||
224 | config USB_AT91 | |
225 | tristate | |
226 | depends on USB_GADGET_AT91 | |
227 | default USB_GADGET | |
1da177e4 | 228 | |
4cf2503c YS |
229 | config USB_GADGET_M66592 |
230 | boolean "M66592 driver" | |
231 | select USB_GADGET_DUALSPEED | |
232 | help | |
233 | M66592 is a USB 2.0 peripheral controller. | |
234 | ||
235 | It has seven configurable endpoints, and endpoint zero. | |
236 | ||
237 | Say "y" to link the driver statically, or "m" to build a | |
238 | dynamically linked module called "m66592_udc" and force all | |
239 | gadget drivers to also be dynamically linked. | |
240 | ||
241 | config USB_M66592 | |
242 | tristate | |
243 | depends on USB_GADGET_M66592 | |
244 | default USB_GADGET | |
245 | select USB_GADGET_SELECTED | |
246 | ||
1da177e4 LT |
247 | config USB_GADGET_DUMMY_HCD |
248 | boolean "Dummy HCD (DEVELOPMENT)" | |
be0c8015 | 249 | depends on (USB=y || (USB=m && USB_GADGET=m)) && EXPERIMENTAL |
1da177e4 LT |
250 | select USB_GADGET_DUALSPEED |
251 | help | |
252 | This host controller driver emulates USB, looping all data transfer | |
253 | requests back to a USB "gadget driver" in the same host. The host | |
254 | side is the master; the gadget side is the slave. Gadget drivers | |
255 | can be high, full, or low speed; and they have access to endpoints | |
256 | like those from NET2280, PXA2xx, or SA1100 hardware. | |
257 | ||
258 | This may help in some stages of creating a driver to embed in a | |
259 | Linux device, since it lets you debug several parts of the gadget | |
260 | driver without its hardware or drivers being involved. | |
261 | ||
262 | Since such a gadget side driver needs to interoperate with a host | |
263 | side Linux-USB device driver, this may help to debug both sides | |
264 | of a USB protocol stack. | |
265 | ||
266 | Say "y" to link the driver statically, or "m" to build a | |
267 | dynamically linked module called "dummy_hcd" and force all | |
268 | gadget drivers to also be dynamically linked. | |
269 | ||
270 | config USB_DUMMY_HCD | |
271 | tristate | |
272 | depends on USB_GADGET_DUMMY_HCD | |
273 | default USB_GADGET | |
028b271b | 274 | select USB_GADGET_SELECTED |
1da177e4 LT |
275 | |
276 | # NOTE: Please keep dummy_hcd LAST so that "real hardware" appears | |
277 | # first and will be selected by default. | |
278 | ||
279 | endchoice | |
280 | ||
281 | config USB_GADGET_DUALSPEED | |
282 | bool | |
283 | depends on USB_GADGET | |
284 | default n | |
285 | help | |
286 | Means that gadget drivers should include extra descriptors | |
287 | and code to handle dual-speed controllers. | |
288 | ||
289 | # | |
290 | # USB Gadget Drivers | |
291 | # | |
292 | choice | |
293 | tristate "USB Gadget Drivers" | |
028b271b | 294 | depends on USB_GADGET && USB_GADGET_SELECTED |
1da177e4 LT |
295 | default USB_ETH |
296 | help | |
297 | A Linux "Gadget Driver" talks to the USB Peripheral Controller | |
298 | driver through the abstract "gadget" API. Some other operating | |
299 | systems call these "client" drivers, of which "class drivers" | |
300 | are a subset (implementing a USB device class specification). | |
301 | A gadget driver implements one or more USB functions using | |
302 | the peripheral hardware. | |
303 | ||
304 | Gadget drivers are hardware-neutral, or "platform independent", | |
305 | except that they sometimes must understand quirks or limitations | |
306 | of the particular controllers they work with. For example, when | |
307 | a controller doesn't support alternate configurations or provide | |
308 | enough of the right types of endpoints, the gadget driver might | |
309 | not be able work with that controller, or might need to implement | |
310 | a less common variant of a device class protocol. | |
311 | ||
312 | # this first set of drivers all depend on bulk-capable hardware. | |
313 | ||
314 | config USB_ZERO | |
315 | tristate "Gadget Zero (DEVELOPMENT)" | |
316 | depends on EXPERIMENTAL | |
317 | help | |
318 | Gadget Zero is a two-configuration device. It either sinks and | |
319 | sources bulk data; or it loops back a configurable number of | |
320 | transfers. It also implements control requests, for "chapter 9" | |
321 | conformance. The driver needs only two bulk-capable endpoints, so | |
322 | it can work on top of most device-side usb controllers. It's | |
323 | useful for testing, and is also a working example showing how | |
324 | USB "gadget drivers" can be written. | |
325 | ||
326 | Make this be the first driver you try using on top of any new | |
327 | USB peripheral controller driver. Then you can use host-side | |
328 | test software, like the "usbtest" driver, to put your hardware | |
329 | and its driver through a basic set of functional tests. | |
330 | ||
331 | Gadget Zero also works with the host-side "usb-skeleton" driver, | |
332 | and with many kinds of host-side test software. You may need | |
333 | to tweak product and vendor IDs before host software knows about | |
334 | this device, and arrange to select an appropriate configuration. | |
335 | ||
336 | Say "y" to link the driver statically, or "m" to build a | |
337 | dynamically linked module called "g_zero". | |
338 | ||
339 | config USB_ZERO_HNPTEST | |
340 | boolean "HNP Test Device" | |
341 | depends on USB_ZERO && USB_OTG | |
342 | help | |
343 | You can configure this device to enumerate using the device | |
344 | identifiers of the USB-OTG test device. That means that when | |
345 | this gadget connects to another OTG device, with this one using | |
346 | the "B-Peripheral" role, that device will use HNP to let this | |
347 | one serve as the USB host instead (in the "B-Host" role). | |
348 | ||
349 | config USB_ETH | |
350 | tristate "Ethernet Gadget (with CDC Ethernet support)" | |
351 | depends on NET | |
352 | help | |
353 | This driver implements Ethernet style communication, in either | |
354 | of two ways: | |
355 | ||
356 | - The "Communication Device Class" (CDC) Ethernet Control Model. | |
357 | That protocol is often avoided with pure Ethernet adapters, in | |
358 | favor of simpler vendor-specific hardware, but is widely | |
359 | supported by firmware for smart network devices. | |
360 | ||
361 | - On hardware can't implement that protocol, a simple CDC subset | |
362 | is used, placing fewer demands on USB. | |
363 | ||
364 | RNDIS support is a third option, more demanding than that subset. | |
365 | ||
366 | Within the USB device, this gadget driver exposes a network device | |
367 | "usbX", where X depends on what other networking devices you have. | |
368 | Treat it like a two-node Ethernet link: host, and gadget. | |
369 | ||
370 | The Linux-USB host-side "usbnet" driver interoperates with this | |
371 | driver, so that deep I/O queues can be supported. On 2.4 kernels, | |
372 | use "CDCEther" instead, if you're using the CDC option. That CDC | |
373 | mode should also interoperate with standard CDC Ethernet class | |
374 | drivers on other host operating systems. | |
375 | ||
376 | Say "y" to link the driver statically, or "m" to build a | |
377 | dynamically linked module called "g_ether". | |
378 | ||
379 | config USB_ETH_RNDIS | |
380 | bool "RNDIS support (EXPERIMENTAL)" | |
381 | depends on USB_ETH && EXPERIMENTAL | |
382 | default y | |
383 | help | |
384 | Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, | |
385 | and Microsoft provides redistributable binary RNDIS drivers for | |
386 | older versions of Windows. | |
387 | ||
388 | If you say "y" here, the Ethernet gadget driver will try to provide | |
389 | a second device configuration, supporting RNDIS to talk to such | |
390 | Microsoft USB hosts. | |
391 | ||
392 | To make MS-Windows work with this, use Documentation/usb/linux.inf | |
393 | as the "driver info file". For versions of MS-Windows older than | |
394 | XP, you'll need to download drivers from Microsoft's website; a URL | |
395 | is given in comments found in that info file. | |
396 | ||
397 | config USB_GADGETFS | |
398 | tristate "Gadget Filesystem (EXPERIMENTAL)" | |
399 | depends on EXPERIMENTAL | |
400 | help | |
401 | This driver provides a filesystem based API that lets user mode | |
402 | programs implement a single-configuration USB device, including | |
403 | endpoint I/O and control requests that don't relate to enumeration. | |
404 | All endpoints, transfer speeds, and transfer types supported by | |
405 | the hardware are available, through read() and write() calls. | |
406 | ||
407 | Say "y" to link the driver statically, or "m" to build a | |
408 | dynamically linked module called "gadgetfs". | |
409 | ||
410 | config USB_FILE_STORAGE | |
411 | tristate "File-backed Storage Gadget" | |
87840289 | 412 | depends on BLOCK |
1da177e4 LT |
413 | help |
414 | The File-backed Storage Gadget acts as a USB Mass Storage | |
415 | disk drive. As its storage repository it can use a regular | |
416 | file or a block device (in much the same way as the "loop" | |
417 | device driver), specified as a module parameter. | |
418 | ||
419 | Say "y" to link the driver statically, or "m" to build a | |
420 | dynamically linked module called "g_file_storage". | |
421 | ||
422 | config USB_FILE_STORAGE_TEST | |
423 | bool "File-backed Storage Gadget testing version" | |
424 | depends on USB_FILE_STORAGE | |
425 | default n | |
426 | help | |
427 | Say "y" to generate the larger testing version of the | |
428 | File-backed Storage Gadget, useful for probing the | |
429 | behavior of USB Mass Storage hosts. Not needed for | |
430 | normal operation. | |
431 | ||
432 | config USB_G_SERIAL | |
433 | tristate "Serial Gadget (with CDC ACM support)" | |
434 | help | |
435 | The Serial Gadget talks to the Linux-USB generic serial driver. | |
436 | This driver supports a CDC-ACM module option, which can be used | |
437 | to interoperate with MS-Windows hosts or with the Linux-USB | |
438 | "cdc-acm" driver. | |
439 | ||
440 | Say "y" to link the driver statically, or "m" to build a | |
441 | dynamically linked module called "g_serial". | |
442 | ||
443 | For more information, see Documentation/usb/gadget_serial.txt | |
444 | which includes instructions and a "driver info file" needed to | |
445 | make MS-Windows work with this driver. | |
446 | ||
f2ebf92c BW |
447 | config USB_MIDI_GADGET |
448 | tristate "MIDI Gadget (EXPERIMENTAL)" | |
449 | depends on SND && EXPERIMENTAL | |
450 | select SND_RAWMIDI | |
451 | help | |
452 | The MIDI Gadget acts as a USB Audio device, with one MIDI | |
453 | input and one MIDI output. These MIDI jacks appear as | |
454 | a sound "card" in the ALSA sound system. Other MIDI | |
455 | connections can then be made on the gadget system, using | |
456 | ALSA's aconnect utility etc. | |
457 | ||
458 | Say "y" to link the driver statically, or "m" to build a | |
459 | dynamically linked module called "g_midi". | |
460 | ||
1da177e4 LT |
461 | |
462 | # put drivers that need isochronous transfer support (for audio | |
463 | # or video class gadget drivers), or specific hardware, here. | |
464 | ||
465 | # - none yet | |
466 | ||
467 | endchoice | |
468 | ||
469 | endmenu |