Commit | Line | Data |
---|---|---|
2b3d942c DB |
1 | /* |
2 | * u_ether.h -- interface to USB gadget "ethernet link" utilities | |
3 | * | |
4 | * Copyright (C) 2003-2005,2008 David Brownell | |
5 | * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger | |
6 | * Copyright (C) 2008 Nokia Corporation | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation; either version 2 of the License, or | |
11 | * (at your option) any later version. | |
2b3d942c DB |
12 | */ |
13 | ||
14 | #ifndef __U_ETHER_H | |
15 | #define __U_ETHER_H | |
16 | ||
17 | #include <linux/err.h> | |
18 | #include <linux/if_ether.h> | |
19 | #include <linux/usb/composite.h> | |
20 | #include <linux/usb/cdc.h> | |
6d3865f9 | 21 | #include <linux/netdevice.h> |
2b3d942c | 22 | |
f1a1823f AP |
23 | #define QMULT_DEFAULT 5 |
24 | ||
25 | /* | |
26 | * dev_addr: initial value | |
27 | * changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx" | |
28 | * host_addr: this address is invisible to ifconfig | |
29 | */ | |
30 | #define USB_ETHERNET_MODULE_PARAMETERS() \ | |
31 | static unsigned qmult = QMULT_DEFAULT; \ | |
32 | module_param(qmult, uint, S_IRUGO|S_IWUSR); \ | |
33 | MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed");\ | |
34 | \ | |
35 | static char *dev_addr; \ | |
36 | module_param(dev_addr, charp, S_IRUGO); \ | |
37 | MODULE_PARM_DESC(dev_addr, "Device Ethernet Address"); \ | |
38 | \ | |
39 | static char *host_addr; \ | |
40 | module_param(host_addr, charp, S_IRUGO); \ | |
41 | MODULE_PARM_DESC(host_addr, "Host Ethernet Address") | |
42 | ||
d6a01439 | 43 | struct eth_dev; |
da741b8c | 44 | |
2b3d942c DB |
45 | /* |
46 | * This represents the USB side of an "ethernet" link, managed by a USB | |
47 | * function which provides control and (maybe) framing. Two functions | |
45fe3b8e DB |
48 | * in different configurations could share the same ethernet link/netdev, |
49 | * using different host interaction models. | |
2b3d942c | 50 | * |
45fe3b8e DB |
51 | * There is a current limitation that only one instance of this link may |
52 | * be present in any given configuration. When that's a problem, network | |
53 | * layer facilities can be used to package multiple logical links on this | |
54 | * single "physical" one. | |
2b3d942c DB |
55 | */ |
56 | struct gether { | |
57 | struct usb_function func; | |
58 | ||
59 | /* updated by gether_{connect,disconnect} */ | |
60 | struct eth_dev *ioport; | |
61 | ||
62 | /* endpoints handle full and/or high speeds */ | |
63 | struct usb_ep *in_ep; | |
64 | struct usb_ep *out_ep; | |
65 | ||
2b3d942c | 66 | bool is_zlp_ok; |
05f6b0ff | 67 | bool no_skb_reserve; |
2b3d942c DB |
68 | |
69 | u16 cdc_filter; | |
70 | ||
9b39e9dd | 71 | /* hooks for added framing, as needed for RNDIS and EEM. */ |
2b3d942c | 72 | u32 header_len; |
5c1168db YK |
73 | /* NCM requires fixed size bundles */ |
74 | bool is_fixed; | |
75 | u32 fixed_out_len; | |
76 | u32 fixed_in_len; | |
6d3865f9 | 77 | bool supports_multi_frame; |
9b39e9dd BN |
78 | struct sk_buff *(*wrap)(struct gether *port, |
79 | struct sk_buff *skb); | |
80 | int (*unwrap)(struct gether *port, | |
81 | struct sk_buff *skb, | |
82 | struct sk_buff_head *list); | |
2b3d942c DB |
83 | |
84 | /* called on network open/close */ | |
85 | void (*open)(struct gether *); | |
86 | void (*close)(struct gether *); | |
87 | }; | |
88 | ||
89 | #define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \ | |
90 | |USB_CDC_PACKET_TYPE_ALL_MULTICAST \ | |
91 | |USB_CDC_PACKET_TYPE_PROMISCUOUS \ | |
92 | |USB_CDC_PACKET_TYPE_DIRECTED) | |
93 | ||
036e98b2 | 94 | /* variant of gether_setup that allows customizing network device name */ |
f1a1823f AP |
95 | struct eth_dev *gether_setup_name(struct usb_gadget *g, |
96 | const char *dev_addr, const char *host_addr, | |
97 | u8 ethaddr[ETH_ALEN], unsigned qmult, const char *netname); | |
2b3d942c DB |
98 | |
99 | /* netdev setup/teardown as directed by the gadget driver */ | |
036e98b2 ML |
100 | /* gether_setup - initialize one ethernet-over-usb link |
101 | * @g: gadget to associated with these links | |
102 | * @ethaddr: NULL, or a buffer in which the ethernet address of the | |
103 | * host side of the link is recorded | |
104 | * Context: may sleep | |
105 | * | |
106 | * This sets up the single network link that may be exported by a | |
107 | * gadget driver using this framework. The link layer addresses are | |
108 | * set up using module parameters. | |
109 | * | |
574f24f7 | 110 | * Returns a eth_dev pointer on success, or an ERR_PTR on failure |
036e98b2 | 111 | */ |
d6a01439 | 112 | static inline struct eth_dev *gether_setup(struct usb_gadget *g, |
f1a1823f AP |
113 | const char *dev_addr, const char *host_addr, |
114 | u8 ethaddr[ETH_ALEN], unsigned qmult) | |
036e98b2 | 115 | { |
f1a1823f | 116 | return gether_setup_name(g, dev_addr, host_addr, ethaddr, qmult, "usb"); |
036e98b2 ML |
117 | } |
118 | ||
bcd4a1c4 AP |
119 | /* |
120 | * variant of gether_setup_default that allows customizing | |
121 | * network device name | |
122 | */ | |
123 | struct net_device *gether_setup_name_default(const char *netname); | |
124 | ||
125 | /* | |
126 | * gether_register_netdev - register the net device | |
127 | * @net: net device to register | |
128 | * | |
129 | * Registers the net device associated with this ethernet-over-usb link | |
130 | * | |
131 | */ | |
132 | int gether_register_netdev(struct net_device *net); | |
133 | ||
134 | /* gether_setup_default - initialize one ethernet-over-usb link | |
135 | * Context: may sleep | |
136 | * | |
137 | * This sets up the single network link that may be exported by a | |
138 | * gadget driver using this framework. The link layer addresses | |
139 | * are set to random values. | |
140 | * | |
141 | * Returns negative errno, or zero on success | |
142 | */ | |
143 | static inline struct net_device *gether_setup_default(void) | |
144 | { | |
145 | return gether_setup_name_default("usb"); | |
146 | } | |
147 | ||
148 | /** | |
149 | * gether_set_gadget - initialize one ethernet-over-usb link with a gadget | |
150 | * @net: device representing this link | |
151 | * @g: the gadget to initialize with | |
152 | * | |
153 | * This associates one ethernet-over-usb link with a gadget. | |
154 | */ | |
155 | void gether_set_gadget(struct net_device *net, struct usb_gadget *g); | |
156 | ||
157 | /** | |
158 | * gether_set_dev_addr - initialize an ethernet-over-usb link with eth address | |
159 | * @net: device representing this link | |
160 | * @dev_addr: eth address of this device | |
161 | * | |
162 | * This sets the device-side Ethernet address of this ethernet-over-usb link | |
163 | * if dev_addr is correct. | |
164 | * Returns negative errno if the new address is incorrect. | |
165 | */ | |
166 | int gether_set_dev_addr(struct net_device *net, const char *dev_addr); | |
167 | ||
168 | /** | |
169 | * gether_get_dev_addr - get an ethernet-over-usb link eth address | |
170 | * @net: device representing this link | |
171 | * @dev_addr: place to store device's eth address | |
172 | * @len: length of the @dev_addr buffer | |
173 | * | |
174 | * This gets the device-side Ethernet address of this ethernet-over-usb link. | |
175 | * Returns zero on success, else negative errno. | |
176 | */ | |
177 | int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len); | |
178 | ||
179 | /** | |
180 | * gether_set_host_addr - initialize an ethernet-over-usb link with host address | |
181 | * @net: device representing this link | |
182 | * @host_addr: eth address of the host | |
183 | * | |
184 | * This sets the host-side Ethernet address of this ethernet-over-usb link | |
185 | * if host_addr is correct. | |
186 | * Returns negative errno if the new address is incorrect. | |
187 | */ | |
188 | int gether_set_host_addr(struct net_device *net, const char *host_addr); | |
189 | ||
190 | /** | |
191 | * gether_get_host_addr - get an ethernet-over-usb link host address | |
192 | * @net: device representing this link | |
193 | * @host_addr: place to store eth address of the host | |
194 | * @len: length of the @host_addr buffer | |
195 | * | |
196 | * This gets the host-side Ethernet address of this ethernet-over-usb link. | |
197 | * Returns zero on success, else negative errno. | |
198 | */ | |
199 | int gether_get_host_addr(struct net_device *net, char *host_addr, int len); | |
200 | ||
201 | /** | |
202 | * gether_get_host_addr_cdc - get an ethernet-over-usb link host address | |
203 | * @net: device representing this link | |
204 | * @host_addr: place to store eth address of the host | |
205 | * @len: length of the @host_addr buffer | |
206 | * | |
207 | * This gets the CDC formatted host-side Ethernet address of this | |
208 | * ethernet-over-usb link. | |
209 | * Returns zero on success, else negative errno. | |
210 | */ | |
211 | int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len); | |
212 | ||
bf4277c7 AP |
213 | /** |
214 | * gether_get_host_addr_u8 - get an ethernet-over-usb link host address | |
215 | * @net: device representing this link | |
216 | * @host_mac: place to store the eth address of the host | |
217 | * | |
218 | * This gets the binary formatted host-side Ethernet address of this | |
219 | * ethernet-over-usb link. | |
220 | */ | |
221 | void gether_get_host_addr_u8(struct net_device *net, u8 host_mac[ETH_ALEN]); | |
222 | ||
bcd4a1c4 AP |
223 | /** |
224 | * gether_set_qmult - initialize an ethernet-over-usb link with a multiplier | |
225 | * @net: device representing this link | |
226 | * @qmult: queue multiplier | |
227 | * | |
228 | * This sets the queue length multiplier of this ethernet-over-usb link. | |
229 | * For higher speeds use longer queues. | |
230 | */ | |
231 | void gether_set_qmult(struct net_device *net, unsigned qmult); | |
232 | ||
233 | /** | |
234 | * gether_get_qmult - get an ethernet-over-usb link multiplier | |
235 | * @net: device representing this link | |
236 | * | |
237 | * This gets the queue length multiplier of this ethernet-over-usb link. | |
238 | */ | |
239 | unsigned gether_get_qmult(struct net_device *net); | |
240 | ||
241 | /** | |
242 | * gether_get_ifname - get an ethernet-over-usb link interface name | |
243 | * @net: device representing this link | |
244 | * @name: place to store the interface name | |
245 | * @len: length of the @name buffer | |
246 | * | |
247 | * This gets the interface name of this ethernet-over-usb link. | |
248 | * Returns zero on success, else negative errno. | |
249 | */ | |
250 | int gether_get_ifname(struct net_device *net, char *name, int len); | |
251 | ||
d6a01439 | 252 | void gether_cleanup(struct eth_dev *dev); |
2b3d942c DB |
253 | |
254 | /* connect/disconnect is handled by individual functions */ | |
255 | struct net_device *gether_connect(struct gether *); | |
256 | void gether_disconnect(struct gether *); | |
257 | ||
da741b8c DB |
258 | /* Some controllers can't support CDC Ethernet (ECM) ... */ |
259 | static inline bool can_support_ecm(struct usb_gadget *gadget) | |
260 | { | |
736d093b | 261 | if (!gadget_is_altset_supported(gadget)) |
da741b8c DB |
262 | return false; |
263 | ||
da741b8c DB |
264 | /* Everything else is *presumably* fine ... but this is a bit |
265 | * chancy, so be **CERTAIN** there are no hardware issues with | |
266 | * your controller. Add it above if it can't handle CDC. | |
267 | */ | |
268 | return true; | |
269 | } | |
270 | ||
2b3d942c | 271 | #endif /* __U_ETHER_H */ |