Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # USB Host Controller Drivers | |
3 | # | |
4 | comment "USB Host Controller Drivers" | |
5 | depends on USB | |
6 | ||
e9b29ffc PK |
7 | config USB_C67X00_HCD |
8 | tristate "Cypress C67x00 HCD support" | |
9 | depends on USB | |
10 | help | |
11 | The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role | |
12 | host/peripheral/OTG USB controllers. | |
13 | ||
14 | Enable this option to support this chip in host controller mode. | |
15 | If unsure, say N. | |
16 | ||
17 | To compile this driver as a module, choose M here: the | |
18 | module will be called c67x00. | |
19 | ||
eb6bab13 SS |
20 | config USB_XHCI_HCD |
21 | tristate "xHCI HCD (USB 3.0) support (EXPERIMENTAL)" | |
1b6ed69f | 22 | depends on USB && PCI && EXPERIMENTAL |
eb6bab13 SS |
23 | ---help--- |
24 | The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 | |
25 | "SuperSpeed" host controller hardware. | |
26 | ||
27 | To compile this driver as a module, choose M here: the | |
28 | module will be called xhci-hcd. | |
29 | ||
30 | config USB_XHCI_HCD_DEBUGGING | |
31 | bool "Debugging for the xHCI host controller" | |
32 | depends on USB_XHCI_HCD | |
33 | ---help--- | |
34 | Say 'Y' to turn on debugging for the xHCI host controller driver. | |
35 | This will spew debugging output, even in interrupt context. | |
36 | This should only be used for debugging xHCI driver bugs. | |
37 | ||
38 | If unsure, say N. | |
39 | ||
1da177e4 LT |
40 | config USB_EHCI_HCD |
41 | tristate "EHCI HCD (USB 2.0) support" | |
76fa9a24 | 42 | depends on USB && USB_ARCH_HAS_EHCI |
1da177e4 LT |
43 | ---help--- |
44 | The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 | |
45 | "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. | |
46 | If your USB host controller supports USB 2.0, you will likely want to | |
b967c88e | 47 | configure this Host Controller Driver. |
1da177e4 LT |
48 | |
49 | EHCI controllers are packaged with "companion" host controllers (OHCI | |
50 | or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports | |
b3c29d85 | 51 | will connect to EHCI if the device is high speed, otherwise they |
1da177e4 LT |
52 | connect to a companion controller. If you configure EHCI, you should |
53 | probably configure the OHCI (for NEC and some other vendors) USB Host | |
54 | Controller Driver or UHCI (for Via motherboards) Host Controller | |
55 | Driver too. | |
56 | ||
57 | You may want to read <file:Documentation/usb/ehci.txt>. | |
58 | ||
59 | To compile this driver as a module, choose M here: the | |
60 | module will be called ehci-hcd. | |
61 | ||
1da177e4 | 62 | config USB_EHCI_ROOT_HUB_TT |
9ec249a6 RD |
63 | bool "Root Hub Transaction Translators" |
64 | depends on USB_EHCI_HCD | |
1da177e4 LT |
65 | ---help--- |
66 | Some EHCI chips have vendor-specific extensions to integrate | |
67 | transaction translators, so that no OHCI or UHCI companion | |
68 | controller is needed. It's safe to say "y" even if your | |
69 | controller doesn't support this feature. | |
70 | ||
ba47f66b DS |
71 | This supports the EHCI implementation that's originally |
72 | from ARC, and has since changed hands a few times. | |
73 | ||
74 | config USB_EHCI_TT_NEWSCHED | |
75 | bool "Improved Transaction Translator scheduling (EXPERIMENTAL)" | |
76 | depends on USB_EHCI_HCD && EXPERIMENTAL | |
77 | ---help--- | |
78 | This changes the periodic scheduling code to fill more of the low | |
79 | and full speed bandwidth available from the Transaction Translator | |
80 | (TT) in USB 2.0 hubs. Without this, only one transfer will be | |
81 | issued in each microframe, significantly reducing the number of | |
82 | periodic low/fullspeed transfers possible. | |
83 | ||
84 | If you have multiple periodic low/fullspeed devices connected to a | |
85 | highspeed USB hub which is connected to a highspeed USB Host | |
86 | Controller, and some of those devices will not work correctly | |
87 | (possibly due to "ENOSPC" or "-28" errors), say Y. | |
88 | ||
89 | If unsure, say N. | |
1da177e4 | 90 | |
083522d7 BH |
91 | config USB_EHCI_BIG_ENDIAN_MMIO |
92 | bool | |
91bc4d31 | 93 | depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || ARCH_IXP4XX) |
4d68c0be | 94 | default y |
083522d7 | 95 | |
6dbd682b SR |
96 | config USB_EHCI_BIG_ENDIAN_DESC |
97 | bool | |
91bc4d31 | 98 | depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX) |
4d68c0be | 99 | default y |
6dbd682b | 100 | |
ba02978a | 101 | config USB_EHCI_FSL |
b5937a41 AV |
102 | bool "Support for Freescale on-chip EHCI USB controller" |
103 | depends on USB_EHCI_HCD && FSL_SOC | |
ba02978a | 104 | select USB_EHCI_ROOT_HUB_TT |
ba02978a LY |
105 | ---help--- |
106 | Variation of ARC USB block used in some Freescale chips. | |
107 | ||
da0e8fb0 VB |
108 | config USB_EHCI_HCD_PPC_OF |
109 | bool "EHCI support for PPC USB controller on OF platform bus" | |
110 | depends on USB_EHCI_HCD && PPC_OF | |
111 | default y | |
112 | ---help--- | |
113 | Enables support for the USB controller present on the PowerPC | |
114 | OpenFirmware platform bus. | |
115 | ||
b92a78e5 RG |
116 | config USB_OXU210HP_HCD |
117 | tristate "OXU210HP HCD support" | |
118 | depends on USB | |
119 | ---help--- | |
120 | The OXU210HP is an USB host/OTG/device controller. Enable this | |
121 | option if your board has this chip. If unsure, say N. | |
122 | ||
123 | This driver does not support isochronous transfers and doesn't | |
124 | implement OTG nor USB device controllers. | |
125 | ||
126 | To compile this driver as a module, choose M here: the | |
127 | module will be called oxu210hp-hcd. | |
128 | ||
4808a1c0 OK |
129 | config USB_ISP116X_HCD |
130 | tristate "ISP116X HCD support" | |
131 | depends on USB | |
4808a1c0 OK |
132 | ---help--- |
133 | The ISP1160 and ISP1161 chips are USB host controllers. Enable this | |
134 | option if your board has this chip. If unsure, say N. | |
135 | ||
136 | This driver does not support isochronous transfers. | |
137 | ||
138 | To compile this driver as a module, choose M here: the | |
139 | module will be called isp116x-hcd. | |
140 | ||
db11e47d SS |
141 | config USB_ISP1760_HCD |
142 | tristate "ISP 1760 HCD support" | |
f7e7aa58 | 143 | depends on USB && EXPERIMENTAL |
db11e47d SS |
144 | ---help--- |
145 | The ISP1760 chip is a USB 2.0 host controller. | |
146 | ||
147 | This driver does not support isochronous transfers or OTG. | |
ff30bf1c SAS |
148 | This USB controller is usually attached to a non-DMA-Master |
149 | capable bus. NXP's eval kit brings this chip on PCI card | |
150 | where the chip itself is behind a PLB to simulate such | |
151 | a bus. | |
db11e47d SS |
152 | |
153 | To compile this driver as a module, choose M here: the | |
ff30bf1c | 154 | module will be called isp1760. |
db11e47d | 155 | |
1da177e4 LT |
156 | config USB_OHCI_HCD |
157 | tristate "OHCI HCD support" | |
158 | depends on USB && USB_ARCH_HAS_OHCI | |
159 | select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 | |
2bf5fa13 | 160 | select USB_OTG_UTILS if ARCH_OMAP |
1da177e4 LT |
161 | ---help--- |
162 | The Open Host Controller Interface (OHCI) is a standard for accessing | |
163 | USB 1.1 host controller hardware. It does more in hardware than Intel's | |
164 | UHCI specification. If your USB host controller follows the OHCI spec, | |
165 | say Y. On most non-x86 systems, and on x86 hardware that's not using a | |
166 | USB controller from Intel or VIA, this is appropriate. If your host | |
167 | controller doesn't use PCI, this is probably appropriate. For a PCI | |
168 | based system where you're not sure, the "lspci -v" entry will list the | |
169 | right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI. | |
170 | ||
171 | To compile this driver as a module, choose M here: the | |
172 | module will be called ohci-hcd. | |
173 | ||
174 | config USB_OHCI_HCD_PPC_SOC | |
175 | bool "OHCI support for on-chip PPC USB controller" | |
176 | depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) | |
177 | default y | |
11d1a4aa BH |
178 | select USB_OHCI_BIG_ENDIAN_DESC |
179 | select USB_OHCI_BIG_ENDIAN_MMIO | |
1da177e4 LT |
180 | ---help--- |
181 | Enables support for the USB controller on the MPC52xx or | |
182 | STB03xxx processor chip. If unsure, say Y. | |
183 | ||
495a678f SM |
184 | config USB_OHCI_HCD_PPC_OF |
185 | bool "OHCI support for PPC USB controller on OF platform bus" | |
186 | depends on USB_OHCI_HCD && PPC_OF | |
187 | default y | |
188 | ---help--- | |
189 | Enables support for the USB controller PowerPC present on the | |
190 | OpenFirmware platform bus. | |
191 | ||
192 | config USB_OHCI_HCD_PPC_OF_BE | |
193 | bool "Support big endian HC" | |
194 | depends on USB_OHCI_HCD_PPC_OF | |
195 | default y | |
196 | select USB_OHCI_BIG_ENDIAN_DESC | |
197 | select USB_OHCI_BIG_ENDIAN_MMIO | |
198 | ||
199 | config USB_OHCI_HCD_PPC_OF_LE | |
200 | bool "Support little endian HC" | |
201 | depends on USB_OHCI_HCD_PPC_OF | |
202 | default n | |
203 | select USB_OHCI_LITTLE_ENDIAN | |
204 | ||
1da177e4 LT |
205 | config USB_OHCI_HCD_PCI |
206 | bool "OHCI support for PCI-bus USB controllers" | |
495a678f | 207 | depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF) |
1da177e4 LT |
208 | default y |
209 | select USB_OHCI_LITTLE_ENDIAN | |
210 | ---help--- | |
211 | Enables support for PCI-bus plug-in USB controller cards. | |
212 | If unsure, say Y. | |
213 | ||
c604e851 MB |
214 | config USB_OHCI_HCD_SSB |
215 | bool "OHCI support for Broadcom SSB OHCI core" | |
1011b326 | 216 | depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL |
c604e851 MB |
217 | default n |
218 | ---help--- | |
219 | Support for the Sonics Silicon Backplane (SSB) attached | |
220 | Broadcom USB OHCI core. | |
221 | ||
222 | This device is present in some embedded devices with | |
223 | Broadcom based SSB bus. | |
224 | ||
225 | If unsure, say N. | |
226 | ||
11d1a4aa BH |
227 | config USB_OHCI_BIG_ENDIAN_DESC |
228 | bool | |
229 | depends on USB_OHCI_HCD | |
230 | default n | |
231 | ||
232 | config USB_OHCI_BIG_ENDIAN_MMIO | |
1da177e4 LT |
233 | bool |
234 | depends on USB_OHCI_HCD | |
235 | default n | |
236 | ||
237 | config USB_OHCI_LITTLE_ENDIAN | |
238 | bool | |
239 | depends on USB_OHCI_HCD | |
240 | default n if STB03xxx || PPC_MPC52xx | |
241 | default y | |
242 | ||
243 | config USB_UHCI_HCD | |
244 | tristate "UHCI HCD (most Intel and VIA) support" | |
245 | depends on USB && PCI | |
246 | ---help--- | |
247 | The Universal Host Controller Interface is a standard by Intel for | |
248 | accessing the USB hardware in the PC (which is also called the USB | |
249 | host controller). If your USB host controller conforms to this | |
250 | standard, you may want to say Y, but see below. All recent boards | |
251 | with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX, | |
252 | i810, i820) conform to this standard. Also all VIA PCI chipsets | |
253 | (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro | |
254 | 133). If unsure, say Y. | |
255 | ||
256 | To compile this driver as a module, choose M here: the | |
257 | module will be called uhci-hcd. | |
258 | ||
236dd4d1 AV |
259 | config USB_FHCI_HCD |
260 | tristate "Freescale QE USB Host Controller support" | |
261 | depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE | |
262 | select FSL_GTM | |
263 | select QE_USB | |
264 | help | |
265 | This driver enables support for Freescale QE USB Host Controller | |
266 | (as found on MPC8360 and MPC8323 processors), the driver supports | |
267 | Full and Low Speed USB. | |
268 | ||
269 | config FHCI_DEBUG | |
270 | bool "Freescale QE USB Host Controller debug support" | |
271 | depends on USB_FHCI_HCD && DEBUG_FS | |
272 | help | |
273 | Say "y" to see some FHCI debug information and statistics | |
274 | throught debugfs. | |
275 | ||
d774efea TO |
276 | config USB_U132_HCD |
277 | tristate "Elan U132 Adapter Host Controller" | |
278 | depends on USB && USB_FTDI_ELAN | |
279 | default M | |
280 | help | |
281 | The U132 adapter is a USB to CardBus adapter specifically designed | |
282 | for PC cards that contain an OHCI host controller. Typical PC cards | |
283 | are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132 | |
284 | adapter will *NOT* work with PC cards that do not contain an OHCI | |
285 | controller. | |
286 | ||
3cb2fccc | 287 | For those PC cards that contain multiple OHCI controllers only the |
d774efea TO |
288 | first one is used. |
289 | ||
290 | The driver consists of two modules, the "ftdi-elan" module is a | |
291 | USB client driver that interfaces to the FTDI chip within ELAN's | |
292 | USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host | |
293 | controller driver that talks to the OHCI controller within the | |
294 | CardBus cards that are inserted in the U132 adapter. | |
295 | ||
296 | This driver has been tested with a CardBus OHCI USB adapter, and | |
297 | worked with a USB PEN Drive inserted into the first USB port of | |
298 | the PCCARD. A rather pointless thing to do, but useful for testing. | |
299 | ||
300 | It is safe to say M here. | |
301 | ||
302 | See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php> | |
303 | ||
1da177e4 LT |
304 | config USB_SL811_HCD |
305 | tristate "SL811HS HCD support" | |
306 | depends on USB | |
1da177e4 LT |
307 | help |
308 | The SL811HS is a single-port USB controller that supports either | |
309 | host side or peripheral side roles. Enable this option if your | |
310 | board has this chip, and you want to use it as a host controller. | |
311 | If unsure, say N. | |
312 | ||
313 | To compile this driver as a module, choose M here: the | |
314 | module will be called sl811-hcd. | |
315 | ||
c6de2b64 DB |
316 | config USB_SL811_CS |
317 | tristate "CF/PCMCIA support for SL811HS HCD" | |
318 | depends on USB_SL811_HCD && PCMCIA | |
c6de2b64 DB |
319 | help |
320 | Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC | |
321 | REX-CFU1U CF card (often used with PDAs). If unsure, say N. | |
322 | ||
323 | To compile this driver as a module, choose M here: the | |
324 | module will be called "sl811_cs". | |
325 | ||
5d304358 | 326 | config USB_R8A66597_HCD |
fa0de2b6 | 327 | tristate "R8A66597 HCD support" |
5d304358 YS |
328 | depends on USB |
329 | help | |
330 | The R8A66597 is a USB 2.0 host and peripheral controller. | |
331 | ||
332 | Enable this option if your board has this chip, and you want | |
333 | to use it as a host controller. If unsure, say N. | |
334 | ||
335 | To compile this driver as a module, choose M here: the | |
336 | module will be called r8a66597-hcd. | |
337 | ||
9424ea29 | 338 | config SUPERH_ON_CHIP_R8A66597 |
77d11ba9 YS |
339 | boolean "Enable SuperH on-chip R8A66597 USB" |
340 | depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723) | |
9424ea29 | 341 | help |
77d11ba9 YS |
342 | This driver enables support for the on-chip R8A66597 in the |
343 | SH7366 and SH7723 processors. | |
7e6133aa DV |
344 | |
345 | config USB_WHCI_HCD | |
6a7c3e46 DV |
346 | tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)" |
347 | depends on EXPERIMENTAL | |
7e6133aa DV |
348 | depends on PCI && USB |
349 | select USB_WUSB | |
350 | select UWB_WHCI | |
351 | help | |
352 | A driver for PCI-based Wireless USB Host Controllers that are | |
353 | compliant with the WHCI specification. | |
354 | ||
355 | To compile this driver a module, choose M here: the module | |
356 | will be called "whci-hcd". | |
d09318b8 IPG |
357 | |
358 | config USB_HWA_HCD | |
6a7c3e46 DV |
359 | tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)" |
360 | depends on EXPERIMENTAL | |
d09318b8 IPG |
361 | depends on USB |
362 | select USB_WUSB | |
363 | select UWB_HWA | |
364 | help | |
365 | This driver enables you to connect Wireless USB devices to | |
366 | your system using a Host Wire Adaptor USB dongle. This is an | |
367 | UWB Radio Controller and WUSB Host Controller connected to | |
368 | your machine via USB (specified in WUSB1.0). | |
369 | ||
370 | To compile this driver a module, choose M here: the module | |
371 | will be called "hwa-hc". |