Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # USB Host Controller Drivers | |
3 | # | |
4 | comment "USB Host Controller Drivers" | |
1da177e4 | 5 | |
e9b29ffc PK |
6 | config USB_C67X00_HCD |
7 | tristate "Cypress C67x00 HCD support" | |
e9b29ffc PK |
8 | help |
9 | The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role | |
10 | host/peripheral/OTG USB controllers. | |
11 | ||
12 | Enable this option to support this chip in host controller mode. | |
13 | If unsure, say N. | |
14 | ||
15 | To compile this driver as a module, choose M here: the | |
16 | module will be called c67x00. | |
17 | ||
eb6bab13 | 18 | config USB_XHCI_HCD |
eb83be98 | 19 | tristate "xHCI HCD (USB 3.0) support" |
25e11ec4 | 20 | depends on USB_ARCH_HAS_XHCI |
eb6bab13 SS |
21 | ---help--- |
22 | The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 | |
23 | "SuperSpeed" host controller hardware. | |
24 | ||
25 | To compile this driver as a module, choose M here: the | |
26 | module will be called xhci-hcd. | |
27 | ||
0fcb9989 FF |
28 | if USB_XHCI_HCD |
29 | ||
3429e91a SAS |
30 | config USB_XHCI_PLATFORM |
31 | tristate | |
3429e91a | 32 | |
eb6bab13 SS |
33 | config USB_XHCI_HCD_DEBUGGING |
34 | bool "Debugging for the xHCI host controller" | |
eb6bab13 SS |
35 | ---help--- |
36 | Say 'Y' to turn on debugging for the xHCI host controller driver. | |
37 | This will spew debugging output, even in interrupt context. | |
38 | This should only be used for debugging xHCI driver bugs. | |
39 | ||
40 | If unsure, say N. | |
41 | ||
0fcb9989 FF |
42 | endif # USB_XHCI_HCD |
43 | ||
1da177e4 LT |
44 | config USB_EHCI_HCD |
45 | tristate "EHCI HCD (USB 2.0) support" | |
25e11ec4 | 46 | depends on USB_ARCH_HAS_EHCI |
1da177e4 LT |
47 | ---help--- |
48 | The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 | |
49 | "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. | |
50 | If your USB host controller supports USB 2.0, you will likely want to | |
b967c88e | 51 | configure this Host Controller Driver. |
1da177e4 LT |
52 | |
53 | EHCI controllers are packaged with "companion" host controllers (OHCI | |
54 | or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports | |
b3c29d85 | 55 | will connect to EHCI if the device is high speed, otherwise they |
1da177e4 LT |
56 | connect to a companion controller. If you configure EHCI, you should |
57 | probably configure the OHCI (for NEC and some other vendors) USB Host | |
58 | Controller Driver or UHCI (for Via motherboards) Host Controller | |
59 | Driver too. | |
60 | ||
61 | You may want to read <file:Documentation/usb/ehci.txt>. | |
62 | ||
63 | To compile this driver as a module, choose M here: the | |
64 | module will be called ehci-hcd. | |
65 | ||
1da177e4 | 66 | config USB_EHCI_ROOT_HUB_TT |
9ec249a6 | 67 | bool "Root Hub Transaction Translators" |
b12909b5 | 68 | depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST |
1da177e4 LT |
69 | ---help--- |
70 | Some EHCI chips have vendor-specific extensions to integrate | |
71 | transaction translators, so that no OHCI or UHCI companion | |
72 | controller is needed. It's safe to say "y" even if your | |
73 | controller doesn't support this feature. | |
74 | ||
ba47f66b DS |
75 | This supports the EHCI implementation that's originally |
76 | from ARC, and has since changed hands a few times. | |
77 | ||
78 | config USB_EHCI_TT_NEWSCHED | |
37cd681c | 79 | bool "Improved Transaction Translator scheduling" |
b12909b5 | 80 | depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST |
37cd681c | 81 | default y |
ba47f66b DS |
82 | ---help--- |
83 | This changes the periodic scheduling code to fill more of the low | |
84 | and full speed bandwidth available from the Transaction Translator | |
85 | (TT) in USB 2.0 hubs. Without this, only one transfer will be | |
86 | issued in each microframe, significantly reducing the number of | |
87 | periodic low/fullspeed transfers possible. | |
88 | ||
89 | If you have multiple periodic low/fullspeed devices connected to a | |
90 | highspeed USB hub which is connected to a highspeed USB Host | |
91 | Controller, and some of those devices will not work correctly | |
37cd681c AS |
92 | (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if |
93 | you have only one such device and it doesn't work, you could try | |
94 | saying N. | |
ba47f66b | 95 | |
37cd681c | 96 | If unsure, say Y. |
1da177e4 | 97 | |
42443dc4 FF |
98 | config USB_FSL_MPH_DR_OF |
99 | tristate | |
100 | ||
101 | if USB_EHCI_HCD | |
102 | ||
adfa79d1 AS |
103 | config USB_EHCI_PCI |
104 | tristate | |
42443dc4 | 105 | depends on PCI |
adfa79d1 AS |
106 | default y |
107 | ||
22ced687 A |
108 | config USB_EHCI_HCD_PMC_MSP |
109 | tristate "EHCI support for on-chip PMC MSP71xx USB controller" | |
42443dc4 | 110 | depends on MSP_HAS_USB |
22ced687 A |
111 | default n |
112 | select USB_EHCI_BIG_ENDIAN_DESC | |
113 | select USB_EHCI_BIG_ENDIAN_MMIO | |
114 | ---help--- | |
115 | Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's. | |
116 | If unsure, say N. | |
117 | ||
083522d7 BH |
118 | config USB_EHCI_BIG_ENDIAN_MMIO |
119 | bool | |
083522d7 | 120 | |
6dbd682b SR |
121 | config USB_EHCI_BIG_ENDIAN_DESC |
122 | bool | |
6dbd682b | 123 | |
08d3c18e JZ |
124 | config XPS_USB_HCD_XILINX |
125 | bool "Use Xilinx usb host EHCI controller core" | |
42443dc4 | 126 | depends on (PPC32 || MICROBLAZE) |
08d3c18e JZ |
127 | select USB_EHCI_BIG_ENDIAN_DESC |
128 | select USB_EHCI_BIG_ENDIAN_MMIO | |
129 | ---help--- | |
130 | Xilinx xps USB host controller core is EHCI compilant and has | |
131 | transaction translator built-in. It can be configured to either | |
132 | support both high speed and full speed devices, or high speed | |
133 | devices only. | |
134 | ||
ba02978a | 135 | config USB_EHCI_FSL |
c0ca9bc5 | 136 | bool "Support for Freescale PPC on-chip EHCI USB controller" |
42443dc4 | 137 | depends on FSL_SOC |
ba02978a | 138 | select USB_EHCI_ROOT_HUB_TT |
018b97d0 | 139 | select USB_FSL_MPH_DR_OF if OF |
7e8d5cd9 DM |
140 | ---help--- |
141 | Variation of ARC USB block used in some Freescale chips. | |
142 | ||
143 | config USB_EHCI_MXC | |
dba63b2f | 144 | tristate "Support for Freescale i.MX on-chip EHCI USB controller" |
42443dc4 | 145 | depends on ARCH_MXC |
7e8d5cd9 | 146 | select USB_EHCI_ROOT_HUB_TT |
ba02978a LY |
147 | ---help--- |
148 | Variation of ARC USB block used in some Freescale chips. | |
149 | ||
7f124f4b | 150 | config USB_EHCI_HCD_OMAP |
54a41966 | 151 | tristate "EHCI support for OMAP3 and later chips" |
42443dc4 | 152 | depends on ARCH_OMAP |
7f124f4b | 153 | default y |
d132d7f6 | 154 | ---help--- |
7f124f4b KM |
155 | Enables support for the on-chip EHCI controller on |
156 | OMAP3 and later chips. | |
7c4ebe68 RQ |
157 | If your system uses a PHY on the USB port, you will need to |
158 | enable USB_PHY and the appropriate PHY driver as well. Most | |
159 | boards need the NOP_USB_XCEIV PHY driver. | |
7f124f4b | 160 | |
a76dd463 MG |
161 | config USB_EHCI_HCD_ORION |
162 | tristate "Support for Marvell EBU on-chip EHCI USB controller" | |
163 | depends on USB_EHCI_HCD && PLAT_ORION | |
164 | default y | |
165 | ---help--- | |
166 | Enables support for the on-chip EHCI controller on Marvell's | |
167 | embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP, | |
168 | Armada 370. This is different from the EHCI implementation | |
169 | on Marvell's mobile PXA and MMP SoC, see "EHCI support for | |
170 | Marvell PXA/MMP USB controller" for those. | |
171 | ||
7675d6ba MG |
172 | config USB_EHCI_HCD_SPEAR |
173 | tristate "Support for ST SPEAr on-chip EHCI USB controller" | |
174 | depends on USB_EHCI_HCD && PLAT_SPEAR | |
175 | default y | |
176 | ---help--- | |
177 | Enables support for the on-chip EHCI controller on | |
178 | ST SPEAr chips. | |
179 | ||
97736961 MG |
180 | config USB_EHCI_HCD_AT91 |
181 | tristate "Support for Atmel on-chip EHCI USB controller" | |
182 | depends on USB_EHCI_HCD && ARCH_AT91 | |
183 | default y | |
184 | ---help--- | |
185 | Enables support for the on-chip EHCI controller on | |
186 | Atmel chips. | |
187 | ||
b0848aea | 188 | config USB_EHCI_MSM |
8c68e84f | 189 | tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller" |
42443dc4 | 190 | depends on ARCH_MSM |
b0848aea | 191 | select USB_EHCI_ROOT_HUB_TT |
dfb2130c | 192 | select USB_MSM_OTG |
b0848aea PK |
193 | ---help--- |
194 | Enables support for the USB Host controller present on the | |
195 | Qualcomm chipsets. Root Hub has inbuilt TT. | |
196 | This driver depends on OTG driver for PHY initialization, | |
8bb6a164 | 197 | clock management, powering up VBUS, and power management. |
8cf28f1f PK |
198 | This driver is not supported on boards like trout which |
199 | has an external PHY. | |
b0848aea | 200 | |
79ad3b5a BG |
201 | config USB_EHCI_TEGRA |
202 | boolean "NVIDIA Tegra HCD support" | |
42443dc4 | 203 | depends on ARCH_TEGRA |
79ad3b5a | 204 | select USB_EHCI_ROOT_HUB_TT |
75f32ec1 | 205 | select USB_PHY |
79ad3b5a BG |
206 | help |
207 | This driver enables support for the internal USB Host Controllers | |
208 | found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. | |
209 | ||
da0e8fb0 VB |
210 | config USB_EHCI_HCD_PPC_OF |
211 | bool "EHCI support for PPC USB controller on OF platform bus" | |
42443dc4 | 212 | depends on PPC_OF |
da0e8fb0 VB |
213 | default y |
214 | ---help--- | |
215 | Enables support for the USB controller present on the PowerPC | |
216 | OpenFirmware platform bus. | |
217 | ||
60b0bf0f YS |
218 | config USB_EHCI_SH |
219 | bool "EHCI support for SuperH USB controller" | |
42443dc4 | 220 | depends on SUPERH |
60b0bf0f YS |
221 | ---help--- |
222 | Enables support for the on-chip EHCI controller on the SuperH. | |
223 | If you use the PCI EHCI controller, this option is not necessary. | |
224 | ||
1bcc5aa8 | 225 | config USB_EHCI_S5P |
7edb3daf | 226 | tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" |
42443dc4 | 227 | depends on PLAT_S5P |
e9a92b2b | 228 | help |
7edb3daf MG |
229 | Enable support for the Samsung S5Pxxxx and Exynos3/4/5 SOC's |
230 | on-chip EHCI controller. | |
1bcc5aa8 | 231 | |
3a082ec9 | 232 | config USB_EHCI_MV |
a76dd463 | 233 | bool "EHCI support for Marvell PXA/MMP USB controller" |
42443dc4 | 234 | depends on (ARCH_PXA || ARCH_MMP) |
3a082ec9 NZ |
235 | select USB_EHCI_ROOT_HUB_TT |
236 | ---help--- | |
237 | Enables support for Marvell (including PXA and MMP series) on-chip | |
238 | USB SPH and OTG controller. SPH is a single port host, and it can | |
239 | only be EHCI host. OTG is controller that can switch to host mode. | |
a76dd463 MG |
240 | Note that this driver will not work on Marvell's other EHCI |
241 | controller used by the EBU-type SoCs including Orion, Kirkwood, | |
242 | Dova, Armada 370 and Armada XP. See "Support for Marvell EBU | |
243 | on-chip EHCI USB controller" for those. | |
3a082ec9 | 244 | |
586dfc8c WZ |
245 | config USB_W90X900_EHCI |
246 | bool "W90X900(W90P910) EHCI support" | |
42443dc4 | 247 | depends on ARCH_W90X900 |
586dfc8c WZ |
248 | ---help--- |
249 | Enables support for the W90X900 USB controller | |
250 | ||
760efe69 | 251 | config USB_CNS3XXX_EHCI |
f3a958d3 | 252 | bool "Cavium CNS3XXX EHCI Module (DEPRECATED)" |
42443dc4 | 253 | depends on ARCH_CNS3XXX |
f3a958d3 | 254 | select USB_EHCI_HCD_PLATFORM |
760efe69 | 255 | ---help--- |
f3a958d3 FF |
256 | This option is deprecated now and the driver was removed, use |
257 | USB_EHCI_HCD_PLATFORM instead. | |
258 | ||
760efe69 ML |
259 | Enable support for the CNS3XXX SOC's on-chip EHCI controller. |
260 | It is needed for high-speed (480Mbit/sec) USB 2.0 device | |
261 | support. | |
262 | ||
502fa841 | 263 | config USB_EHCI_ATH79 |
5d98cd4e | 264 | bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)" |
42443dc4 | 265 | depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X) |
502fa841 | 266 | select USB_EHCI_ROOT_HUB_TT |
5d98cd4e | 267 | select USB_EHCI_HCD_PLATFORM |
502fa841 GJ |
268 | default y |
269 | ---help--- | |
5d98cd4e HM |
270 | This option is deprecated now and the driver was removed, use |
271 | USB_EHCI_HCD_PLATFORM instead. | |
272 | ||
502fa841 GJ |
273 | Enables support for the built-in EHCI controller present |
274 | on the Atheros AR7XXX/AR9XXX SoCs. | |
275 | ||
42443dc4 FF |
276 | config USB_EHCI_HCD_PLATFORM |
277 | tristate "Generic EHCI driver for a platform device" | |
278 | default n | |
279 | ---help--- | |
280 | Adds an EHCI host driver for a generic platform device, which | |
281 | provides a memory space and an irq. | |
282 | ||
283 | If unsure, say N. | |
284 | ||
285 | config USB_OCTEON_EHCI | |
286 | bool "Octeon on-chip EHCI support" | |
287 | depends on CPU_CAVIUM_OCTEON | |
288 | default n | |
289 | select USB_EHCI_BIG_ENDIAN_MMIO | |
290 | help | |
291 | Enable support for the Octeon II SOC's on-chip EHCI | |
292 | controller. It is needed for high-speed (480Mbit/sec) | |
293 | USB 2.0 device support. All CN6XXX based chips with USB are | |
294 | supported. | |
295 | ||
296 | endif # USB_EHCI_HCD | |
297 | ||
b92a78e5 RG |
298 | config USB_OXU210HP_HCD |
299 | tristate "OXU210HP HCD support" | |
25e11ec4 | 300 | depends on GENERIC_HARDIRQS |
b92a78e5 RG |
301 | ---help--- |
302 | The OXU210HP is an USB host/OTG/device controller. Enable this | |
303 | option if your board has this chip. If unsure, say N. | |
304 | ||
305 | This driver does not support isochronous transfers and doesn't | |
306 | implement OTG nor USB device controllers. | |
307 | ||
308 | To compile this driver as a module, choose M here: the | |
309 | module will be called oxu210hp-hcd. | |
310 | ||
4808a1c0 OK |
311 | config USB_ISP116X_HCD |
312 | tristate "ISP116X HCD support" | |
4808a1c0 OK |
313 | ---help--- |
314 | The ISP1160 and ISP1161 chips are USB host controllers. Enable this | |
315 | option if your board has this chip. If unsure, say N. | |
316 | ||
317 | This driver does not support isochronous transfers. | |
318 | ||
319 | To compile this driver as a module, choose M here: the | |
320 | module will be called isp116x-hcd. | |
321 | ||
db11e47d SS |
322 | config USB_ISP1760_HCD |
323 | tristate "ISP 1760 HCD support" | |
db11e47d SS |
324 | ---help--- |
325 | The ISP1760 chip is a USB 2.0 host controller. | |
326 | ||
327 | This driver does not support isochronous transfers or OTG. | |
ff30bf1c SAS |
328 | This USB controller is usually attached to a non-DMA-Master |
329 | capable bus. NXP's eval kit brings this chip on PCI card | |
330 | where the chip itself is behind a PLB to simulate such | |
331 | a bus. | |
db11e47d SS |
332 | |
333 | To compile this driver as a module, choose M here: the | |
ff30bf1c | 334 | module will be called isp1760. |
db11e47d | 335 | |
a9d43091 LW |
336 | config USB_ISP1362_HCD |
337 | tristate "ISP1362 HCD support" | |
a9d43091 LW |
338 | default N |
339 | ---help--- | |
340 | Supports the Philips ISP1362 chip as a host controller | |
341 | ||
342 | This driver does not support isochronous transfers. | |
343 | ||
344 | To compile this driver as a module, choose M here: the | |
345 | module will be called isp1362-hcd. | |
346 | ||
1da177e4 LT |
347 | config USB_OHCI_HCD |
348 | tristate "OHCI HCD support" | |
25e11ec4 | 349 | depends on USB_ARCH_HAS_OHCI |
1da177e4 | 350 | select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 |
61464c83 | 351 | depends on USB_ISP1301 || !ARCH_LPC32XX |
1da177e4 LT |
352 | ---help--- |
353 | The Open Host Controller Interface (OHCI) is a standard for accessing | |
354 | USB 1.1 host controller hardware. It does more in hardware than Intel's | |
355 | UHCI specification. If your USB host controller follows the OHCI spec, | |
356 | say Y. On most non-x86 systems, and on x86 hardware that's not using a | |
357 | USB controller from Intel or VIA, this is appropriate. If your host | |
358 | controller doesn't use PCI, this is probably appropriate. For a PCI | |
359 | based system where you're not sure, the "lspci -v" entry will list the | |
360 | right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI. | |
361 | ||
362 | To compile this driver as a module, choose M here: the | |
363 | module will be called ohci-hcd. | |
364 | ||
3ad3ca05 FF |
365 | if USB_OHCI_HCD |
366 | ||
968b448b AG |
367 | config USB_OHCI_HCD_OMAP1 |
368 | bool "OHCI support for OMAP1/2 chips" | |
3ad3ca05 | 369 | depends on ARCH_OMAP1 |
968b448b AG |
370 | default y |
371 | ---help--- | |
372 | Enables support for the OHCI controller on OMAP1/2 chips. | |
373 | ||
374 | config USB_OHCI_HCD_OMAP3 | |
375 | bool "OHCI support for OMAP3 and later chips" | |
3ad3ca05 | 376 | depends on (ARCH_OMAP3 || ARCH_OMAP4) |
968b448b AG |
377 | default y |
378 | ---help--- | |
379 | Enables support for the on-chip OHCI controller on | |
380 | OMAP3 and later chips. | |
381 | ||
90e6ca5c | 382 | config USB_OHCI_ATH79 |
5d98cd4e | 383 | bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)" |
3ad3ca05 | 384 | depends on (SOC_AR71XX || SOC_AR724X) |
5d98cd4e | 385 | select USB_OHCI_HCD_PLATFORM |
90e6ca5c GJ |
386 | default y |
387 | help | |
5d98cd4e HM |
388 | This option is deprecated now and the driver was removed, use |
389 | USB_OHCI_HCD_PLATFORM instead. | |
390 | ||
90e6ca5c GJ |
391 | Enables support for the built-in OHCI controller present on the |
392 | Atheros AR71XX/AR7240 SoCs. | |
393 | ||
495a678f | 394 | config USB_OHCI_HCD_PPC_OF_BE |
45e83889 | 395 | bool "OHCI support for OF platform bus (big endian)" |
3ad3ca05 | 396 | depends on PPC_OF |
495a678f SM |
397 | select USB_OHCI_BIG_ENDIAN_DESC |
398 | select USB_OHCI_BIG_ENDIAN_MMIO | |
45e83889 AB |
399 | ---help--- |
400 | Enables support for big-endian USB controllers present on the | |
401 | OpenFirmware platform bus. | |
495a678f SM |
402 | |
403 | config USB_OHCI_HCD_PPC_OF_LE | |
45e83889 | 404 | bool "OHCI support for OF platform bus (little endian)" |
3ad3ca05 | 405 | depends on PPC_OF |
495a678f | 406 | select USB_OHCI_LITTLE_ENDIAN |
45e83889 AB |
407 | ---help--- |
408 | Enables support for little-endian USB controllers present on the | |
409 | OpenFirmware platform bus. | |
410 | ||
411 | config USB_OHCI_HCD_PPC_OF | |
412 | bool | |
3ad3ca05 | 413 | depends on PPC_OF |
45e83889 | 414 | default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE |
495a678f | 415 | |
1da177e4 LT |
416 | config USB_OHCI_HCD_PCI |
417 | bool "OHCI support for PCI-bus USB controllers" | |
3ad3ca05 | 418 | depends on PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF) |
1da177e4 LT |
419 | default y |
420 | select USB_OHCI_LITTLE_ENDIAN | |
421 | ---help--- | |
422 | Enables support for PCI-bus plug-in USB controller cards. | |
423 | If unsure, say Y. | |
424 | ||
c604e851 | 425 | config USB_OHCI_HCD_SSB |
259b83a3 | 426 | bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)" |
3ad3ca05 | 427 | depends on (SSB = y || SSB = USB_OHCI_HCD) |
259b83a3 HM |
428 | select USB_HCD_SSB |
429 | select USB_OHCI_HCD_PLATFORM | |
c604e851 MB |
430 | default n |
431 | ---help--- | |
259b83a3 HM |
432 | This option is deprecated now and the driver was removed, use |
433 | USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead. | |
434 | ||
c604e851 MB |
435 | Support for the Sonics Silicon Backplane (SSB) attached |
436 | Broadcom USB OHCI core. | |
437 | ||
438 | This device is present in some embedded devices with | |
439 | Broadcom based SSB bus. | |
440 | ||
441 | If unsure, say N. | |
442 | ||
60b0bf0f | 443 | config USB_OHCI_SH |
231a72e0 | 444 | bool "OHCI support for SuperH USB controller (DEPRECATED)" |
3ad3ca05 | 445 | depends on SUPERH |
231a72e0 | 446 | select USB_OHCI_HCD_PLATFORM |
60b0bf0f | 447 | ---help--- |
231a72e0 FF |
448 | This option is deprecated now and the driver was removed, use |
449 | USB_OHCI_HCD_PLATFORM instead. | |
450 | ||
60b0bf0f YS |
451 | Enables support for the on-chip OHCI controller on the SuperH. |
452 | If you use the PCI OHCI controller, this option is not necessary. | |
453 | ||
62194244 JH |
454 | config USB_OHCI_EXYNOS |
455 | boolean "OHCI support for Samsung EXYNOS SoC Series" | |
3ad3ca05 | 456 | depends on ARCH_EXYNOS |
62194244 JH |
457 | help |
458 | Enable support for the Samsung Exynos SOC's on-chip OHCI controller. | |
459 | ||
760efe69 | 460 | config USB_CNS3XXX_OHCI |
c23920b0 | 461 | bool "Cavium CNS3XXX OHCI Module (DEPRECATED)" |
3ad3ca05 | 462 | depends on ARCH_CNS3XXX |
c23920b0 | 463 | select USB_OHCI_HCD_PLATFORM |
760efe69 | 464 | ---help--- |
c23920b0 FF |
465 | This option is deprecated now and the driver was removed, use |
466 | USB_OHCI_HCD_PLATFORM instead. | |
467 | ||
760efe69 ML |
468 | Enable support for the CNS3XXX SOC's on-chip OHCI controller. |
469 | It is needed for low-speed USB 1.0 device support. | |
470 | ||
fa3364b5 HM |
471 | config USB_OHCI_HCD_PLATFORM |
472 | bool "Generic OHCI driver for a platform device" | |
fa3364b5 HM |
473 | default n |
474 | ---help--- | |
475 | Adds an OHCI host driver for a generic platform device, which | |
898d828b | 476 | provides a memory space and an irq. |
fa3364b5 HM |
477 | |
478 | If unsure, say N. | |
479 | ||
3ad3ca05 FF |
480 | config USB_OCTEON_OHCI |
481 | bool "Octeon on-chip OHCI support" | |
482 | depends on CPU_CAVIUM_OCTEON | |
483 | default USB_OCTEON_EHCI | |
484 | select USB_OHCI_BIG_ENDIAN_MMIO | |
485 | select USB_OHCI_LITTLE_ENDIAN | |
486 | help | |
487 | Enable support for the Octeon II SOC's on-chip OHCI | |
488 | controller. It is needed for low-speed USB 1.0 device | |
489 | support. All CN6XXX based chips with USB are supported. | |
490 | ||
7a7a4a59 | 491 | |
11d1a4aa BH |
492 | config USB_OHCI_BIG_ENDIAN_DESC |
493 | bool | |
11d1a4aa BH |
494 | default n |
495 | ||
496 | config USB_OHCI_BIG_ENDIAN_MMIO | |
1da177e4 | 497 | bool |
1da177e4 LT |
498 | default n |
499 | ||
500 | config USB_OHCI_LITTLE_ENDIAN | |
501 | bool | |
1da177e4 LT |
502 | default n if STB03xxx || PPC_MPC52xx |
503 | default y | |
504 | ||
3ad3ca05 FF |
505 | endif # USB_OHCI_HCD |
506 | ||
1da177e4 LT |
507 | config USB_UHCI_HCD |
508 | tristate "UHCI HCD (most Intel and VIA) support" | |
25e11ec4 | 509 | depends on PCI || SPARC_LEON || ARCH_VT8500 |
1da177e4 LT |
510 | ---help--- |
511 | The Universal Host Controller Interface is a standard by Intel for | |
512 | accessing the USB hardware in the PC (which is also called the USB | |
513 | host controller). If your USB host controller conforms to this | |
514 | standard, you may want to say Y, but see below. All recent boards | |
515 | with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX, | |
516 | i810, i820) conform to this standard. Also all VIA PCI chipsets | |
517 | (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro | |
3db7739c JA |
518 | 133) and LEON/GRLIB SoCs with the GRUSBHC controller. |
519 | If unsure, say Y. | |
1da177e4 LT |
520 | |
521 | To compile this driver as a module, choose M here: the | |
522 | module will be called uhci-hcd. | |
523 | ||
d3219d1c JA |
524 | config USB_UHCI_SUPPORT_NON_PCI_HC |
525 | bool | |
526 | depends on USB_UHCI_HCD | |
100d4597 TP |
527 | default y if (SPARC_LEON || ARCH_VT8500) |
528 | ||
529 | config USB_UHCI_PLATFORM | |
530 | bool "Generic UHCI Platform Driver support" | |
531 | depends on USB_UHCI_SUPPORT_NON_PCI_HC | |
532 | default y if ARCH_VT8500 | |
533 | ---help--- | |
534 | Enable support for generic UHCI platform devices that require no | |
535 | additional configuration. | |
d3219d1c | 536 | |
8452c674 | 537 | config USB_UHCI_BIG_ENDIAN_MMIO |
51e2f62f | 538 | bool |
fda928ac JA |
539 | depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON |
540 | default y | |
51e2f62f JA |
541 | |
542 | config USB_UHCI_BIG_ENDIAN_DESC | |
8452c674 | 543 | bool |
fda928ac JA |
544 | depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON |
545 | default y | |
8452c674 | 546 | |
236dd4d1 AV |
547 | config USB_FHCI_HCD |
548 | tristate "Freescale QE USB Host Controller support" | |
25e11ec4 | 549 | depends on OF_GPIO && QE_GPIO && QUICC_ENGINE |
236dd4d1 AV |
550 | select FSL_GTM |
551 | select QE_USB | |
552 | help | |
553 | This driver enables support for Freescale QE USB Host Controller | |
554 | (as found on MPC8360 and MPC8323 processors), the driver supports | |
555 | Full and Low Speed USB. | |
556 | ||
557 | config FHCI_DEBUG | |
558 | bool "Freescale QE USB Host Controller debug support" | |
559 | depends on USB_FHCI_HCD && DEBUG_FS | |
560 | help | |
561 | Say "y" to see some FHCI debug information and statistics | |
25985edc | 562 | through debugfs. |
236dd4d1 | 563 | |
d774efea TO |
564 | config USB_U132_HCD |
565 | tristate "Elan U132 Adapter Host Controller" | |
25e11ec4 | 566 | depends on USB_FTDI_ELAN |
d774efea TO |
567 | default M |
568 | help | |
569 | The U132 adapter is a USB to CardBus adapter specifically designed | |
570 | for PC cards that contain an OHCI host controller. Typical PC cards | |
571 | are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132 | |
572 | adapter will *NOT* work with PC cards that do not contain an OHCI | |
573 | controller. | |
574 | ||
3cb2fccc | 575 | For those PC cards that contain multiple OHCI controllers only the |
d774efea TO |
576 | first one is used. |
577 | ||
578 | The driver consists of two modules, the "ftdi-elan" module is a | |
579 | USB client driver that interfaces to the FTDI chip within ELAN's | |
580 | USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host | |
581 | controller driver that talks to the OHCI controller within the | |
582 | CardBus cards that are inserted in the U132 adapter. | |
583 | ||
584 | This driver has been tested with a CardBus OHCI USB adapter, and | |
585 | worked with a USB PEN Drive inserted into the first USB port of | |
586 | the PCCARD. A rather pointless thing to do, but useful for testing. | |
587 | ||
588 | It is safe to say M here. | |
589 | ||
590 | See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php> | |
591 | ||
1da177e4 LT |
592 | config USB_SL811_HCD |
593 | tristate "SL811HS HCD support" | |
1da177e4 LT |
594 | help |
595 | The SL811HS is a single-port USB controller that supports either | |
596 | host side or peripheral side roles. Enable this option if your | |
597 | board has this chip, and you want to use it as a host controller. | |
598 | If unsure, say N. | |
599 | ||
600 | To compile this driver as a module, choose M here: the | |
601 | module will be called sl811-hcd. | |
602 | ||
ad7c56f0 MF |
603 | config USB_SL811_HCD_ISO |
604 | bool "partial ISO support" | |
605 | depends on USB_SL811_HCD | |
606 | help | |
607 | The driver doesn't support iso_frame_desc (yet), but for some simple | |
608 | devices that just queue one ISO frame per URB, then ISO transfers | |
609 | "should" work using the normal urb status fields. | |
610 | ||
611 | If unsure, say N. | |
612 | ||
c6de2b64 DB |
613 | config USB_SL811_CS |
614 | tristate "CF/PCMCIA support for SL811HS HCD" | |
615 | depends on USB_SL811_HCD && PCMCIA | |
c6de2b64 DB |
616 | help |
617 | Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC | |
618 | REX-CFU1U CF card (often used with PDAs). If unsure, say N. | |
619 | ||
620 | To compile this driver as a module, choose M here: the | |
621 | module will be called "sl811_cs". | |
622 | ||
5d304358 | 623 | config USB_R8A66597_HCD |
fa0de2b6 | 624 | tristate "R8A66597 HCD support" |
5d304358 YS |
625 | help |
626 | The R8A66597 is a USB 2.0 host and peripheral controller. | |
627 | ||
628 | Enable this option if your board has this chip, and you want | |
629 | to use it as a host controller. If unsure, say N. | |
630 | ||
631 | To compile this driver as a module, choose M here: the | |
632 | module will be called r8a66597-hcd. | |
633 | ||
034d7c13 KM |
634 | config USB_RENESAS_USBHS_HCD |
635 | tristate "Renesas USBHS HCD support" | |
034d7c13 KM |
636 | depends on USB_RENESAS_USBHS |
637 | help | |
638 | The Renesas USBHS is a USB 2.0 host and peripheral controller. | |
639 | ||
640 | Enable this option if your board has this chip, and you want | |
641 | to use it as a host controller. If unsure, say N. | |
642 | ||
643 | To compile this driver as a module, choose M here: the | |
644 | module will be called renesas-usbhs. | |
645 | ||
7e6133aa | 646 | config USB_WHCI_HCD |
eb83be98 | 647 | tristate "Wireless USB Host Controller Interface (WHCI) driver" |
36f8ecbf | 648 | depends on PCI && USB && UWB |
7e6133aa DV |
649 | select USB_WUSB |
650 | select UWB_WHCI | |
651 | help | |
652 | A driver for PCI-based Wireless USB Host Controllers that are | |
653 | compliant with the WHCI specification. | |
654 | ||
655 | To compile this driver a module, choose M here: the module | |
656 | will be called "whci-hcd". | |
d09318b8 IPG |
657 | |
658 | config USB_HWA_HCD | |
eb83be98 | 659 | tristate "Host Wire Adapter (HWA) driver" |
25e11ec4 | 660 | depends on UWB |
d09318b8 IPG |
661 | select USB_WUSB |
662 | select UWB_HWA | |
663 | help | |
664 | This driver enables you to connect Wireless USB devices to | |
665 | your system using a Host Wire Adaptor USB dongle. This is an | |
666 | UWB Radio Controller and WUSB Host Controller connected to | |
667 | your machine via USB (specified in WUSB1.0). | |
668 | ||
669 | To compile this driver a module, choose M here: the module | |
670 | will be called "hwa-hc". | |
23d3e7a6 MF |
671 | |
672 | config USB_IMX21_HCD | |
5de9ec4d | 673 | tristate "i.MX21 HCD support" |
25e11ec4 | 674 | depends on ARM && ARCH_MXC |
23d3e7a6 MF |
675 | help |
676 | This driver enables support for the on-chip USB host in the | |
5de9ec4d | 677 | i.MX21 processor. |
23d3e7a6 MF |
678 | |
679 | To compile this driver as a module, choose M here: the | |
680 | module will be called "imx21-hcd". | |
681 | ||
1643accd | 682 | |
1643accd DD |
683 | |
684 | config USB_OCTEON2_COMMON | |
685 | bool | |
686 | default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI | |
62e11d1b HM |
687 | |
688 | config USB_HCD_BCMA | |
689 | tristate "BCMA usb host driver" | |
eb83be98 | 690 | depends on BCMA |
62e11d1b HM |
691 | select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD |
692 | select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD | |
693 | help | |
71c421db | 694 | Enable support for the EHCI and OCHI host controller on an bcma bus. |
62e11d1b HM |
695 | It converts the bcma driver into two platform device drivers |
696 | for ehci and ohci. | |
697 | ||
698 | If unsure, say N. | |
7043c2cc HM |
699 | |
700 | config USB_HCD_SSB | |
701 | tristate "SSB usb host driver" | |
eb83be98 | 702 | depends on SSB |
7043c2cc HM |
703 | select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD |
704 | select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD | |
705 | help | |
71c421db | 706 | Enable support for the EHCI and OCHI host controller on an bcma bus. |
7043c2cc HM |
707 | It converts the bcma driver into two platform device drivers |
708 | for ehci and ohci. | |
709 | ||
710 | If unsure, say N. |