[deliverable/linux.git] / drivers / usb / phy / phy-twl6030-usb.c

/*
 * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
 *
 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * Author: Hema HK <hemahk@ti.com>
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/usb/musb.h>
#include <linux/usb/phy_companion.h>
#include <linux/phy/omap_usb.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/of.h>

/* usb register definitions */
#define USB_VENDOR_ID_LSB		0x00
#define USB_VENDOR_ID_MSB		0x01
#define USB_PRODUCT_ID_LSB		0x02
#define USB_PRODUCT_ID_MSB		0x03
#define USB_VBUS_CTRL_SET		0x04
#define USB_VBUS_CTRL_CLR		0x05
#define USB_ID_CTRL_SET			0x06
#define USB_ID_CTRL_CLR			0x07
#define USB_VBUS_INT_SRC		0x08
#define USB_VBUS_INT_LATCH_SET		0x09
#define USB_VBUS_INT_LATCH_CLR		0x0A
#define USB_VBUS_INT_EN_LO_SET		0x0B
#define USB_VBUS_INT_EN_LO_CLR		0x0C
#define USB_VBUS_INT_EN_HI_SET		0x0D
#define USB_VBUS_INT_EN_HI_CLR		0x0E
#define USB_ID_INT_SRC			0x0F
#define USB_ID_INT_LATCH_SET		0x10
#define USB_ID_INT_LATCH_CLR		0x11

#define USB_ID_INT_EN_LO_SET		0x12
#define USB_ID_INT_EN_LO_CLR		0x13
#define USB_ID_INT_EN_HI_SET		0x14
#define USB_ID_INT_EN_HI_CLR		0x15
#define USB_OTG_ADP_CTRL		0x16
#define USB_OTG_ADP_HIGH		0x17
#define USB_OTG_ADP_LOW			0x18
#define USB_OTG_ADP_RISE		0x19
#define USB_OTG_REVISION		0x1A

/* to be moved to LDO */
#define TWL6030_MISC2			0xE5
#define TWL6030_CFG_LDO_PD2		0xF5
#define TWL6030_BACKUP_REG		0xFA

#define STS_HW_CONDITIONS		0x21

/* In module TWL6030_MODULE_PM_MASTER */
#define STS_HW_CONDITIONS		0x21
#define STS_USB_ID			BIT(2)

/* In module TWL6030_MODULE_PM_RECEIVER */
#define VUSB_CFG_TRANS			0x71
#define VUSB_CFG_STATE			0x72
#define VUSB_CFG_VOLTAGE		0x73

/* in module TWL6030_MODULE_MAIN_CHARGE */

#define CHARGERUSB_CTRL1		0x8

#define CONTROLLER_STAT1		0x03
#define	VBUS_DET			BIT(2)

struct twl6030_usb {
	struct phy_companion	comparator;
	struct device		*dev;

	/* for vbus reporting with irqs disabled */
	spinlock_t		lock;

	struct regulator		*usb3v3;

	/* used to set vbus, in atomic path */
	struct work_struct	set_vbus_work;

	int			irq1;
	int			irq2;
	enum musb_vbus_id_status linkstat;
	u8			asleep;
	bool			vbus_enable;
	const char		*regulator;
};

#define	comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator)

/*-------------------------------------------------------------------------*/

static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module,
						u8 data, u8 address)
{
	int ret = 0;

	ret = twl_i2c_write_u8(module, data, address);
	if (ret < 0)
		dev_err(twl->dev,
			"Write[0x%x] Error %d\n", address, ret);
	return ret;
}

static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
{
	u8 data;
	int ret;

	ret = twl_i2c_read_u8(module, &data, address);
	if (ret >= 0)
		ret = data;
	else
		dev_err(twl->dev,
			"readb[0x%x,0x%x] Error %d\n",
					module, address, ret);
	return ret;
}

static int twl6030_start_srp(struct phy_companion *comparator)
{
	struct twl6030_usb *twl = comparator_to_twl(comparator);

	twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET);
	twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET);

	mdelay(100);
	twl6030_writeb(twl, TWL_MODULE_USB, 0xa0, USB_VBUS_CTRL_CLR);

	return 0;
}

static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
{
	/* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
	twl6030_writeb(twl, TWL6030_MODULE_ID0, 0x1, TWL6030_BACKUP_REG);

	/* Program CFG_LDO_PD2 register and set VUSB bit */
	twl6030_writeb(twl, TWL6030_MODULE_ID0, 0x1, TWL6030_CFG_LDO_PD2);

	/* Program MISC2 register and set bit VUSB_IN_VBAT */
	twl6030_writeb(twl, TWL6030_MODULE_ID0, 0x10, TWL6030_MISC2);

	twl->usb3v3 = regulator_get(twl->dev, twl->regulator);
	if (IS_ERR(twl->usb3v3))
		return -ENODEV;

	/* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
	twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);

	/*
	 * Program the USB_ID_CTRL_SET register to enable GND drive
	 * and the ID comparators
	 */
	twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET);

	return 0;
}

static ssize_t twl6030_usb_vbus_show(struct device *dev,
			struct device_attribute *attr, char *buf)
{
	struct twl6030_usb *twl = dev_get_drvdata(dev);
	unsigned long flags;
	int ret = -EINVAL;

	spin_lock_irqsave(&twl->lock, flags);

	switch (twl->linkstat) {
	case MUSB_VBUS_VALID:
	       ret = snprintf(buf, PAGE_SIZE, "vbus\n");
	       break;
	case MUSB_ID_GROUND:
	       ret = snprintf(buf, PAGE_SIZE, "id\n");
	       break;
	case MUSB_VBUS_OFF:
	       ret = snprintf(buf, PAGE_SIZE, "none\n");
	       break;
	default:
	       ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
	}
	spin_unlock_irqrestore(&twl->lock, flags);

	return ret;
}
static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);

static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
{
	struct twl6030_usb *twl = _twl;
	enum musb_vbus_id_status status = MUSB_UNKNOWN;
	u8 vbus_state, hw_state;
	int ret;

	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);

	vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE,
						CONTROLLER_STAT1);
	if (!(hw_state & STS_USB_ID)) {
		if (vbus_state & VBUS_DET) {
			ret = regulator_enable(twl->usb3v3);
			if (ret)
				dev_err(twl->dev, "Failed to enable usb3v3\n");

			twl->asleep = 1;
			status = MUSB_VBUS_VALID;
			twl->linkstat = status;
			ret = musb_mailbox(status);
			if (ret)
				twl->linkstat = MUSB_UNKNOWN;
		} else {
			if (twl->linkstat != MUSB_UNKNOWN) {
				status = MUSB_VBUS_OFF;
				twl->linkstat = status;
				ret = musb_mailbox(status);
				if (ret)
					twl->linkstat = MUSB_UNKNOWN;
				if (twl->asleep) {
					regulator_disable(twl->usb3v3);
					twl->asleep = 0;
				}
			}
		}
	}
	sysfs_notify(&twl->dev->kobj, NULL, "vbus");

	return IRQ_HANDLED;
}

static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
{
	struct twl6030_usb *twl = _twl;
	enum musb_vbus_id_status status = MUSB_UNKNOWN;
	u8 hw_state;
	int ret;

	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);

	if (hw_state & STS_USB_ID) {
		ret = regulator_enable(twl->usb3v3);
		if (ret)
			dev_err(twl->dev, "Failed to enable usb3v3\n");

		twl->asleep = 1;
		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
		status = MUSB_ID_GROUND;
		twl->linkstat = status;
		ret = musb_mailbox(status);
		if (ret)
			twl->linkstat = MUSB_UNKNOWN;
	} else  {
		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
	}
	twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);

	return IRQ_HANDLED;
}

static int twl6030_enable_irq(struct twl6030_usb *twl)
{
	twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
	twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
	twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);

	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
				REG_INT_MSK_LINE_C);
	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
				REG_INT_MSK_STS_C);
	twl6030_usb_irq(twl->irq2, twl);
	twl6030_usbotg_irq(twl->irq1, twl);

	return 0;
}

static void otg_set_vbus_work(struct work_struct *data)
{
	struct twl6030_usb *twl = container_of(data, struct twl6030_usb,
								set_vbus_work);

	/*
	 * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1
	 * register. This enables boost mode.
	 */

	if (twl->vbus_enable)
		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE, 0x40,
							CHARGERUSB_CTRL1);
	else
		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE, 0x00,
							CHARGERUSB_CTRL1);
}

static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled)
{
	struct twl6030_usb *twl = comparator_to_twl(comparator);

	twl->vbus_enable = enabled;
	schedule_work(&twl->set_vbus_work);

	return 0;
}

static int twl6030_usb_probe(struct platform_device *pdev)
{
	u32 ret;
	struct twl6030_usb	*twl;
	int			status, err;
	struct device_node	*np = pdev->dev.of_node;
	struct device		*dev = &pdev->dev;
	struct twl4030_usb_data	*pdata = dev_get_platdata(dev);

	twl = devm_kzalloc(dev, sizeof(*twl), GFP_KERNEL);
	if (!twl)
		return -ENOMEM;

	twl->dev		= &pdev->dev;
	twl->irq1		= platform_get_irq(pdev, 0);
	twl->irq2		= platform_get_irq(pdev, 1);
	twl->linkstat		= MUSB_UNKNOWN;

	twl->comparator.set_vbus	= twl6030_set_vbus;
	twl->comparator.start_srp	= twl6030_start_srp;

	ret = omap_usb2_set_comparator(&twl->comparator);
	if (ret == -ENODEV) {
		dev_info(&pdev->dev, "phy not ready, deferring probe");
		return -EPROBE_DEFER;
	}

	if (np) {
		twl->regulator = "usb";
	} else if (pdata) {
		if (pdata->features & TWL6032_SUBCLASS)
			twl->regulator = "ldousb";
		else
			twl->regulator = "vusb";
	} else {
		dev_err(&pdev->dev, "twl6030 initialized without pdata\n");
		return -EINVAL;
	}

	/* init spinlock for workqueue */
	spin_lock_init(&twl->lock);

	err = twl6030_usb_ldo_init(twl);
	if (err) {
		dev_err(&pdev->dev, "ldo init failed\n");
		return err;
	}

	platform_set_drvdata(pdev, twl);
	if (device_create_file(&pdev->dev, &dev_attr_vbus))
		dev_warn(&pdev->dev, "could not create sysfs file\n");

	INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);

	status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
			"twl6030_usb", twl);
	if (status < 0) {
		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
			twl->irq1, status);
		device_remove_file(twl->dev, &dev_attr_vbus);
		return status;
	}

	status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
			"twl6030_usb", twl);
	if (status < 0) {
		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
			twl->irq2, status);
		free_irq(twl->irq1, twl);
		device_remove_file(twl->dev, &dev_attr_vbus);
		return status;
	}

	twl->asleep = 0;
	twl6030_enable_irq(twl);
	dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");

	return 0;
}

static int twl6030_usb_remove(struct platform_device *pdev)
{
	struct twl6030_usb *twl = platform_get_drvdata(pdev);

	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
		REG_INT_MSK_LINE_C);
	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
			REG_INT_MSK_STS_C);
	free_irq(twl->irq1, twl);
	free_irq(twl->irq2, twl);
	regulator_put(twl->usb3v3);
	device_remove_file(twl->dev, &dev_attr_vbus);
	cancel_work_sync(&twl->set_vbus_work);

	return 0;
}

#ifdef CONFIG_OF
static const struct of_device_id twl6030_usb_id_table[] = {
	{ .compatible = "ti,twl6030-usb" },
	{}
};
MODULE_DEVICE_TABLE(of, twl6030_usb_id_table);
#endif

static struct platform_driver twl6030_usb_driver = {
	.probe		= twl6030_usb_probe,
	.remove		= twl6030_usb_remove,
	.driver		= {
		.name	= "twl6030_usb",
		.of_match_table = of_match_ptr(twl6030_usb_id_table),
	},
};

static int __init twl6030_usb_init(void)
{
	return platform_driver_register(&twl6030_usb_driver);
}
subsys_initcall(twl6030_usb_init);

static void __exit twl6030_usb_exit(void)
{
	platform_driver_unregister(&twl6030_usb_driver);
}
module_exit(twl6030_usb_exit);

MODULE_ALIAS("platform:twl6030_usb");
MODULE_AUTHOR("Hema HK <hemahk@ti.com>");
MODULE_DESCRIPTION("TWL6030 USB transceiver driver");
MODULE_LICENSE("GPL");
Commit	Line	Data
c33fad0c HH	1	/*
	2	* twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
	3	*
	4	* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
	5	* This program is free software; you can redistribute it and/or modify
	6	* it under the terms of the GNU General Public License as published by
	7	* the Free Software Foundation; either version 2 of the License, or
	8	* (at your option) any later version.
	9	*
	10	* Author: Hema HK <hemahk@ti.com>
	11	*
	12	* This program is distributed in the hope that it will be useful,
	13	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	* GNU General Public License for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License
	18	* along with this program; if not, write to the Free Software
	19	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	20	*
	21	*/
	22
	23	#include <linux/module.h>
	24	#include <linux/init.h>
	25	#include <linux/interrupt.h>
	26	#include <linux/platform_device.h>
	27	#include <linux/io.h>
8055555f	28	#include <linux/usb/musb.h>
0e98de67	29	#include <linux/usb/phy_companion.h>
6284be23	30	#include <linux/phy/omap_usb.h>
c33fad0c HH	31	#include <linux/i2c/twl.h>
	32	#include <linux/regulator/consumer.h>
	33	#include <linux/err.h>
c33fad0c	34	#include <linux/slab.h>
603ab524	35	#include <linux/delay.h>
80d7d8a7	36	#include <linux/of.h>
c33fad0c HH	37
	38	/* usb register definitions */
	39	#define USB_VENDOR_ID_LSB 0x00
	40	#define USB_VENDOR_ID_MSB 0x01
	41	#define USB_PRODUCT_ID_LSB 0x02
	42	#define USB_PRODUCT_ID_MSB 0x03
	43	#define USB_VBUS_CTRL_SET 0x04
	44	#define USB_VBUS_CTRL_CLR 0x05
	45	#define USB_ID_CTRL_SET 0x06
	46	#define USB_ID_CTRL_CLR 0x07
	47	#define USB_VBUS_INT_SRC 0x08
	48	#define USB_VBUS_INT_LATCH_SET 0x09
	49	#define USB_VBUS_INT_LATCH_CLR 0x0A
	50	#define USB_VBUS_INT_EN_LO_SET 0x0B
	51	#define USB_VBUS_INT_EN_LO_CLR 0x0C
	52	#define USB_VBUS_INT_EN_HI_SET 0x0D
	53	#define USB_VBUS_INT_EN_HI_CLR 0x0E
	54	#define USB_ID_INT_SRC 0x0F
	55	#define USB_ID_INT_LATCH_SET 0x10
	56	#define USB_ID_INT_LATCH_CLR 0x11
	57
	58	#define USB_ID_INT_EN_LO_SET 0x12
	59	#define USB_ID_INT_EN_LO_CLR 0x13
	60	#define USB_ID_INT_EN_HI_SET 0x14
	61	#define USB_ID_INT_EN_HI_CLR 0x15
	62	#define USB_OTG_ADP_CTRL 0x16
	63	#define USB_OTG_ADP_HIGH 0x17
	64	#define USB_OTG_ADP_LOW 0x18
	65	#define USB_OTG_ADP_RISE 0x19
	66	#define USB_OTG_REVISION 0x1A
	67
	68	/* to be moved to LDO */
	69	#define TWL6030_MISC2 0xE5
	70	#define TWL6030_CFG_LDO_PD2 0xF5
	71	#define TWL6030_BACKUP_REG 0xFA
	72
	73	#define STS_HW_CONDITIONS 0x21
	74
	75	/* In module TWL6030_MODULE_PM_MASTER */
	76	#define STS_HW_CONDITIONS 0x21
	77	#define STS_USB_ID BIT(2)
	78
	79	/* In module TWL6030_MODULE_PM_RECEIVER */
	80	#define VUSB_CFG_TRANS 0x71
	81	#define VUSB_CFG_STATE 0x72
	82	#define VUSB_CFG_VOLTAGE 0x73
	83
	84	/* in module TWL6030_MODULE_MAIN_CHARGE */
	85
	86	#define CHARGERUSB_CTRL1 0x8
	87
	88	#define CONTROLLER_STAT1 0x03
	89	#define VBUS_DET BIT(2)
	90
	91	struct twl6030_usb {
0e98de67	92	struct phy_companion comparator;
c33fad0c HH	93	struct device *dev;
	94
	95	/* for vbus reporting with irqs disabled */
	96	spinlock_t lock;
	97
	98	struct regulator *usb3v3;
	99
5bf54506 MS	100	/* used to set vbus, in atomic path */
	101	struct work_struct set_vbus_work;
	102
c33fad0c HH	103	int irq1;
c33fad0c HH	104	int irq2;
8055555f	105	enum musb_vbus_id_status linkstat;
c33fad0c	106	u8 asleep;
5bf54506	107	bool vbus_enable;
ff0a1f39	108	const char *regulator;
c33fad0c HH	109	};
c33fad0c HH	110
0e98de67	111	#define comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator)
c33fad0c HH	112
	113	/-------------------------------------------------------------------------/
	114
	115	static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module,
	116	u8 data, u8 address)
	117	{
	118	int ret = 0;
	119
	120	ret = twl_i2c_write_u8(module, data, address);
	121	if (ret < 0)
	122	dev_err(twl->dev,
	123	"Write[0x%x] Error %d\n", address, ret);
	124	return ret;
	125	}
	126
	127	static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
	128	{
0b551490 DC	129	u8 data;
0b551490 DC	130	int ret;
c33fad0c HH	131
	132	ret = twl_i2c_read_u8(module, &data, address);
	133	if (ret >= 0)
	134	ret = data;
	135	else
	136	dev_err(twl->dev,
	137	"readb[0x%x,0x%x] Error %d\n",
	138	module, address, ret);
	139	return ret;
	140	}
	141
0e98de67	142	static int twl6030_start_srp(struct phy_companion *comparator)
c33fad0c	143	{
0e98de67	144	struct twl6030_usb *twl = comparator_to_twl(comparator);
603ab524 HH	145
	146	twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET);
	147	twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET);
	148
	149	mdelay(100);
	150	twl6030_writeb(twl, TWL_MODULE_USB, 0xa0, USB_VBUS_CTRL_CLR);
	151
	152	return 0;
	153	}
	154
c33fad0c HH	155	static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
c33fad0c HH	156	{
c33fad0c	157	/* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
13069bd9	158	twl6030_writeb(twl, TWL6030_MODULE_ID0, 0x1, TWL6030_BACKUP_REG);
c33fad0c HH	159
c33fad0c HH	160	/* Program CFG_LDO_PD2 register and set VUSB bit */
13069bd9	161	twl6030_writeb(twl, TWL6030_MODULE_ID0, 0x1, TWL6030_CFG_LDO_PD2);
c33fad0c HH	162
c33fad0c HH	163	/* Program MISC2 register and set bit VUSB_IN_VBAT */
13069bd9	164	twl6030_writeb(twl, TWL6030_MODULE_ID0, 0x10, TWL6030_MISC2);
c33fad0c	165
ff0a1f39	166	twl->usb3v3 = regulator_get(twl->dev, twl->regulator);
c33fad0c HH	167	if (IS_ERR(twl->usb3v3))
	168	return -ENODEV;
	169
c33fad0c HH	170	/* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
	171	twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
	172
	173	/*
	174	* Program the USB_ID_CTRL_SET register to enable GND drive
	175	* and the ID comparators
	176	*/
	177	twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET);
	178
	179	return 0;
	180	}
	181
	182	static ssize_t twl6030_usb_vbus_show(struct device *dev,
	183	struct device_attribute attr, char buf)
	184	{
	185	struct twl6030_usb *twl = dev_get_drvdata(dev);
	186	unsigned long flags;
	187	int ret = -EINVAL;
	188
	189	spin_lock_irqsave(&twl->lock, flags);
	190
	191	switch (twl->linkstat) {
8055555f	192	case MUSB_VBUS_VALID:
c33fad0c HH	193	ret = snprintf(buf, PAGE_SIZE, "vbus\n");
c33fad0c HH	194	break;
8055555f	195	case MUSB_ID_GROUND:
c33fad0c HH	196	ret = snprintf(buf, PAGE_SIZE, "id\n");
c33fad0c HH	197	break;
8055555f	198	case MUSB_VBUS_OFF:
c33fad0c HH	199	ret = snprintf(buf, PAGE_SIZE, "none\n");
	200	break;
	201	default:
	202	ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
	203	}
	204	spin_unlock_irqrestore(&twl->lock, flags);
	205
	206	return ret;
	207	}
	208	static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);
	209
	210	static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
	211	{
	212	struct twl6030_usb *twl = _twl;
8055555f	213	enum musb_vbus_id_status status = MUSB_UNKNOWN;
c33fad0c	214	u8 vbus_state, hw_state;
bb54542c	215	int ret;
c33fad0c HH	216
	217	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
	218
	219	vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE,
	220	CONTROLLER_STAT1);
	221	if (!(hw_state & STS_USB_ID)) {
	222	if (vbus_state & VBUS_DET) {
bb54542c FB	223	ret = regulator_enable(twl->usb3v3);
	224	if (ret)
	225	dev_err(twl->dev, "Failed to enable usb3v3\n");
	226
6dc2503b	227	twl->asleep = 1;
8055555f	228	status = MUSB_VBUS_VALID;
6dc2503b	229	twl->linkstat = status;
12b7db2b TL	230	ret = musb_mailbox(status);
	231	if (ret)
	232	twl->linkstat = MUSB_UNKNOWN;
c33fad0c	233	} else {
8055555f TL	234	if (twl->linkstat != MUSB_UNKNOWN) {
8055555f TL	235	status = MUSB_VBUS_OFF;
c9721438	236	twl->linkstat = status;
12b7db2b TL	237	ret = musb_mailbox(status);
	238	if (ret)
	239	twl->linkstat = MUSB_UNKNOWN;
c9721438 KVA	240	if (twl->asleep) {
	241	regulator_disable(twl->usb3v3);
	242	twl->asleep = 0;
	243	}
6dc2503b	244	}
c33fad0c HH	245	}
	246	}
	247	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
	248
	249	return IRQ_HANDLED;
	250	}
	251
	252	static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
	253	{
	254	struct twl6030_usb *twl = _twl;
8055555f	255	enum musb_vbus_id_status status = MUSB_UNKNOWN;
c33fad0c	256	u8 hw_state;
bb54542c	257	int ret;
c33fad0c HH	258
	259	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
	260
	261	if (hw_state & STS_USB_ID) {
bb54542c FB	262	ret = regulator_enable(twl->usb3v3);
	263	if (ret)
	264	dev_err(twl->dev, "Failed to enable usb3v3\n");
c33fad0c	265
6dc2503b	266	twl->asleep = 1;
dc8738d9 MS	267	twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
dc8738d9 MS	268	twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
8055555f	269	status = MUSB_ID_GROUND;
31e9992a	270	twl->linkstat = status;
12b7db2b TL	271	ret = musb_mailbox(status);
	272	if (ret)
	273	twl->linkstat = MUSB_UNKNOWN;
c33fad0c	274	} else {
dc8738d9 MS	275	twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
dc8738d9 MS	276	twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
c33fad0c	277	}
dc8738d9	278	twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
c33fad0c HH	279
	280	return IRQ_HANDLED;
	281	}
	282
0e98de67	283	static int twl6030_enable_irq(struct twl6030_usb *twl)
c33fad0c	284	{
dc8738d9	285	twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
c33fad0c HH	286	twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
	287	twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
	288
	289	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
	290	REG_INT_MSK_LINE_C);
	291	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
	292	REG_INT_MSK_STS_C);
	293	twl6030_usb_irq(twl->irq2, twl);
	294	twl6030_usbotg_irq(twl->irq1, twl);
	295
	296	return 0;
	297	}
	298
5bf54506	299	static void otg_set_vbus_work(struct work_struct *data)
c33fad0c	300	{
5bf54506 MS	301	struct twl6030_usb *twl = container_of(data, struct twl6030_usb,
5bf54506 MS	302	set_vbus_work);
c33fad0c HH	303
	304	/*
	305	* Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1
	306	* register. This enables boost mode.
	307	*/
5bf54506 MS	308
5bf54506 MS	309	if (twl->vbus_enable)
13069bd9	310	twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE, 0x40,
5bf54506 MS	311	CHARGERUSB_CTRL1);
5bf54506 MS	312	else
13069bd9	313	twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE, 0x00,
5bf54506 MS	314	CHARGERUSB_CTRL1);
	315	}
	316
0e98de67	317	static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled)
5bf54506	318	{
0e98de67	319	struct twl6030_usb *twl = comparator_to_twl(comparator);
5bf54506 MS	320
	321	twl->vbus_enable = enabled;
	322	schedule_work(&twl->set_vbus_work);
	323
c33fad0c HH	324	return 0;
	325	}
	326
41ac7b3a	327	static int twl6030_usb_probe(struct platform_device *pdev)
c33fad0c	328	{
0e98de67	329	u32 ret;
c33fad0c HH	330	struct twl6030_usb *twl;
c33fad0c HH	331	int status, err;
ff0a1f39 KVA	332	struct device_node *np = pdev->dev.of_node;
ff0a1f39 KVA	333	struct device *dev = &pdev->dev;
19f9e188	334	struct twl4030_usb_data *pdata = dev_get_platdata(dev);
c33fad0c	335
2ee8ff30	336	twl = devm_kzalloc(dev, sizeof(*twl), GFP_KERNEL);
c33fad0c HH	337	if (!twl)
	338	return -ENOMEM;
	339
	340	twl->dev = &pdev->dev;
	341	twl->irq1 = platform_get_irq(pdev, 0);
	342	twl->irq2 = platform_get_irq(pdev, 1);
8055555f	343	twl->linkstat = MUSB_UNKNOWN;
46b8f6b0	344
0e98de67 KVA	345	twl->comparator.set_vbus = twl6030_set_vbus;
0e98de67 KVA	346	twl->comparator.start_srp = twl6030_start_srp;
46b8f6b0	347
0e98de67 KVA	348	ret = omap_usb2_set_comparator(&twl->comparator);
	349	if (ret == -ENODEV) {
	350	dev_info(&pdev->dev, "phy not ready, deferring probe");
	351	return -EPROBE_DEFER;
	352	}
c33fad0c	353
ff0a1f39 KVA	354	if (np) {
	355	twl->regulator = "usb";
	356	} else if (pdata) {
89ce43fb	357	if (pdata->features & TWL6032_SUBCLASS)
ff0a1f39 KVA	358	twl->regulator = "ldousb";
	359	else
	360	twl->regulator = "vusb";
	361	} else {
	362	dev_err(&pdev->dev, "twl6030 initialized without pdata\n");
	363	return -EINVAL;
	364	}
	365
c33fad0c HH	366	/* init spinlock for workqueue */
	367	spin_lock_init(&twl->lock);
	368
	369	err = twl6030_usb_ldo_init(twl);
	370	if (err) {
	371	dev_err(&pdev->dev, "ldo init failed\n");
c33fad0c HH	372	return err;
c33fad0c HH	373	}
c33fad0c HH	374
	375	platform_set_drvdata(pdev, twl);
	376	if (device_create_file(&pdev->dev, &dev_attr_vbus))
	377	dev_warn(&pdev->dev, "could not create sysfs file\n");
	378
5bf54506 MS	379	INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);
5bf54506 MS	380
c33fad0c	381	status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
8f9d973a	382	IRQF_TRIGGER_FALLING \| IRQF_TRIGGER_RISING \| IRQF_ONESHOT,
c33fad0c HH	383	"twl6030_usb", twl);
	384	if (status < 0) {
	385	dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
	386	twl->irq1, status);
	387	device_remove_file(twl->dev, &dev_attr_vbus);
c33fad0c HH	388	return status;
	389	}
	390
	391	status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
8f9d973a	392	IRQF_TRIGGER_FALLING \| IRQF_TRIGGER_RISING \| IRQF_ONESHOT,
c33fad0c HH	393	"twl6030_usb", twl);
	394	if (status < 0) {
	395	dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
	396	twl->irq2, status);
	397	free_irq(twl->irq1, twl);
	398	device_remove_file(twl->dev, &dev_attr_vbus);
c33fad0c HH	399	return status;
	400	}
	401
6dc2503b	402	twl->asleep = 0;
0e98de67	403	twl6030_enable_irq(twl);
c33fad0c HH	404	dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
	405
	406	return 0;
	407	}
	408
39d35681	409	static int twl6030_usb_remove(struct platform_device *pdev)
c33fad0c HH	410	{
	411	struct twl6030_usb *twl = platform_get_drvdata(pdev);
	412
c33fad0c HH	413	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
	414	REG_INT_MSK_LINE_C);
	415	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
	416	REG_INT_MSK_STS_C);
	417	free_irq(twl->irq1, twl);
	418	free_irq(twl->irq2, twl);
	419	regulator_put(twl->usb3v3);
c33fad0c	420	device_remove_file(twl->dev, &dev_attr_vbus);
5bf54506	421	cancel_work_sync(&twl->set_vbus_work);
c33fad0c HH	422
	423	return 0;
	424	}
	425
ff0a1f39 KVA	426	#ifdef CONFIG_OF
	427	static const struct of_device_id twl6030_usb_id_table[] = {
	428	{ .compatible = "ti,twl6030-usb" },
	429	{}
	430	};
	431	MODULE_DEVICE_TABLE(of, twl6030_usb_id_table);
	432	#endif
	433
c33fad0c HH	434	static struct platform_driver twl6030_usb_driver = {
c33fad0c HH	435	.probe = twl6030_usb_probe,
39d35681	436	.remove = twl6030_usb_remove,
c33fad0c HH	437	.driver = {
c33fad0c HH	438	.name = "twl6030_usb",
ff0a1f39	439	.of_match_table = of_match_ptr(twl6030_usb_id_table),
c33fad0c HH	440	},
	441	};
	442
	443	static int __init twl6030_usb_init(void)
	444	{
	445	return platform_driver_register(&twl6030_usb_driver);
	446	}
	447	subsys_initcall(twl6030_usb_init);
	448
	449	static void __exit twl6030_usb_exit(void)
	450	{
	451	platform_driver_unregister(&twl6030_usb_driver);
	452	}
	453	module_exit(twl6030_usb_exit);
	454
	455	MODULE_ALIAS("platform:twl6030_usb");
	456	MODULE_AUTHOR("Hema HK <hemahk@ti.com>");
	457	MODULE_DESCRIPTION("TWL6030 USB transceiver driver");
	458	MODULE_LICENSE("GPL");