Merge remote-tracking branch 'usb-gadget/next'
[deliverable/linux.git] / drivers / usb / renesas_usbhs / common.c
CommitLineData
f1407d5c
KM
1/*
2 * Renesas USB driver
3 *
4 * Copyright (C) 2011 Renesas Solutions Corp.
5 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
6 *
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
11 *
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
15 *
16 */
148e1134 17#include <linux/err.h>
8ecef00f 18#include <linux/gpio.h>
f1407d5c
KM
19#include <linux/io.h>
20#include <linux/module.h>
b854100e
YS
21#include <linux/of_device.h>
22#include <linux/of_gpio.h>
f1407d5c
KM
23#include <linux/pm_runtime.h>
24#include <linux/slab.h>
25#include <linux/sysfs.h>
cc502bb7 26#include "common.h"
8ecef00f 27#include "rcar2.h"
de18757e 28#include "rcar3.h"
f1407d5c 29
233f519d
KM
30/*
31 * image of renesas_usbhs
32 *
33 * ex) gadget case
34
35 * mod.c
36 * mod_gadget.c
37 * mod_host.c pipe.c fifo.c
38 *
39 * +-------+ +-----------+
40 * | pipe0 |------>| fifo pio |
41 * +------------+ +-------+ +-----------+
42 * | mod_gadget |=====> | pipe1 |--+
43 * +------------+ +-------+ | +-----------+
44 * | pipe2 | | +-| fifo dma0 |
45 * +------------+ +-------+ | | +-----------+
46 * | mod_host | | pipe3 |<-|--+
47 * +------------+ +-------+ | +-----------+
48 * | .... | +--->| fifo dma1 |
49 * | .... | +-----------+
50 */
51
52
b002ff6e
KM
53#define USBHSF_RUNTIME_PWCTRL (1 << 0)
54
55/* status */
56#define usbhsc_flags_init(p) do {(p)->flags = 0; } while (0)
57#define usbhsc_flags_set(p, b) ((p)->flags |= (b))
58#define usbhsc_flags_clr(p, b) ((p)->flags &= ~(b))
59#define usbhsc_flags_has(p, b) ((p)->flags & (b))
60
f1407d5c
KM
61/*
62 * platform call back
63 *
64 * renesas usb support platform callback function.
65 * Below macro call it.
66 * if platform doesn't have callback, it return 0 (no error)
67 */
68#define usbhs_platform_call(priv, func, args...)\
69 (!(priv) ? -ENODEV : \
48298206
KM
70 !((priv)->pfunc.func) ? 0 : \
71 (priv)->pfunc.func(args))
f1407d5c
KM
72
73/*
74 * common functions
75 */
76u16 usbhs_read(struct usbhs_priv *priv, u32 reg)
77{
78 return ioread16(priv->base + reg);
79}
80
81void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data)
82{
83 iowrite16(data, priv->base + reg);
84}
85
86void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data)
87{
88 u16 val = usbhs_read(priv, reg);
89
90 val &= ~mask;
91 val |= data & mask;
92
93 usbhs_write(priv, reg, val);
94}
95
206dcc2c
KM
96struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev)
97{
98 return dev_get_drvdata(&pdev->dev);
99}
100
f1407d5c
KM
101/*
102 * syscfg functions
103 */
76190152 104static void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable)
f1407d5c
KM
105{
106 usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0);
107}
108
f1407d5c
KM
109void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable)
110{
3244a7b4
KM
111 u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
112 u16 val = DCFM | DRPD | HSE | USBE;
f427eb64
KM
113 int has_otg = usbhs_get_dparam(priv, has_otg);
114
115 if (has_otg)
116 usbhs_bset(priv, DVSTCTR, (EXTLP | PWEN), (EXTLP | PWEN));
f1407d5c
KM
117
118 /*
119 * if enable
120 *
121 * - select Host mode
122 * - D+ Line/D- Line Pull-down
123 */
124 usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
125}
126
127void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable)
128{
3244a7b4 129 u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
04a5def3 130 u16 val = HSE | USBE;
f1407d5c
KM
131
132 /*
133 * if enable
134 *
135 * - select Function mode
04a5def3
TK
136 * - D+ Line Pull-up is disabled
137 * When D+ Line Pull-up is enabled,
138 * calling usbhs_sys_function_pullup(,1)
f1407d5c
KM
139 */
140 usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
141}
142
4cd2f599 143void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable)
144{
145 usbhs_bset(priv, SYSCFG, DPRPU, enable ? DPRPU : 0);
146}
147
dfbb7f4f
KM
148void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode)
149{
150 usbhs_write(priv, TESTMODE, mode);
151}
152
f1407d5c
KM
153/*
154 * frame functions
155 */
156int usbhs_frame_get_num(struct usbhs_priv *priv)
157{
158 return usbhs_read(priv, FRMNUM) & FRNM_MASK;
159}
160
ef8bedb9
KM
161/*
162 * usb request functions
163 */
164void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
165{
166 u16 val;
167
168 val = usbhs_read(priv, USBREQ);
169 req->bRequest = (val >> 8) & 0xFF;
170 req->bRequestType = (val >> 0) & 0xFF;
171
172 req->wValue = usbhs_read(priv, USBVAL);
173 req->wIndex = usbhs_read(priv, USBINDX);
174 req->wLength = usbhs_read(priv, USBLENG);
175}
176
177void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
178{
179 usbhs_write(priv, USBREQ, (req->bRequest << 8) | req->bRequestType);
180 usbhs_write(priv, USBVAL, req->wValue);
181 usbhs_write(priv, USBINDX, req->wIndex);
182 usbhs_write(priv, USBLENG, req->wLength);
183
184 usbhs_bset(priv, DCPCTR, SUREQ, SUREQ);
185}
186
258485d9
KM
187/*
188 * bus/vbus functions
189 */
190void usbhs_bus_send_sof_enable(struct usbhs_priv *priv)
191{
a9be4a45
KM
192 u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT);
193
194 if (status != USBRST) {
195 struct device *dev = usbhs_priv_to_dev(priv);
196 dev_err(dev, "usbhs should be reset\n");
197 }
198
258485d9
KM
199 usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT);
200}
201
202void usbhs_bus_send_reset(struct usbhs_priv *priv)
203{
204 usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST);
205}
206
75587f52
KM
207int usbhs_bus_get_speed(struct usbhs_priv *priv)
208{
209 u16 dvstctr = usbhs_read(priv, DVSTCTR);
210
211 switch (RHST & dvstctr) {
212 case RHST_LOW_SPEED:
213 return USB_SPEED_LOW;
214 case RHST_FULL_SPEED:
215 return USB_SPEED_FULL;
216 case RHST_HIGH_SPEED:
217 return USB_SPEED_HIGH;
218 }
219
220 return USB_SPEED_UNKNOWN;
221}
222
258485d9
KM
223int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable)
224{
225 struct platform_device *pdev = usbhs_priv_to_pdev(priv);
226
227 return usbhs_platform_call(priv, set_vbus, pdev, enable);
228}
229
230static void usbhsc_bus_init(struct usbhs_priv *priv)
231{
232 usbhs_write(priv, DVSTCTR, 0);
233
234 usbhs_vbus_ctrl(priv, 0);
235}
236
eb05191f
KM
237/*
238 * device configuration
239 */
3dd49268 240int usbhs_set_device_config(struct usbhs_priv *priv, int devnum,
eb05191f
KM
241 u16 upphub, u16 hubport, u16 speed)
242{
243 struct device *dev = usbhs_priv_to_dev(priv);
244 u16 usbspd = 0;
245 u32 reg = DEVADD0 + (2 * devnum);
246
247 if (devnum > 10) {
248 dev_err(dev, "cannot set speed to unknown device %d\n", devnum);
249 return -EIO;
250 }
251
252 if (upphub > 0xA) {
253 dev_err(dev, "unsupported hub number %d\n", upphub);
254 return -EIO;
255 }
256
257 switch (speed) {
258 case USB_SPEED_LOW:
259 usbspd = USBSPD_SPEED_LOW;
260 break;
261 case USB_SPEED_FULL:
262 usbspd = USBSPD_SPEED_FULL;
263 break;
264 case USB_SPEED_HIGH:
265 usbspd = USBSPD_SPEED_HIGH;
266 break;
267 default:
268 dev_err(dev, "unsupported speed %d\n", speed);
269 return -EIO;
270 }
271
272 usbhs_write(priv, reg, UPPHUB(upphub) |
273 HUBPORT(hubport)|
274 USBSPD(usbspd));
275
276 return 0;
277}
278
ab330cf3
YS
279/*
280 * interrupt functions
281 */
282void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit)
283{
284 u16 pipe_mask = (u16)GENMASK(usbhs_get_dparam(priv, pipe_size), 0);
285
286 usbhs_write(priv, sts_reg, ~(1 << bit) & pipe_mask);
287}
288
f1407d5c
KM
289/*
290 * local functions
291 */
11935de5 292static void usbhsc_set_buswait(struct usbhs_priv *priv)
f1407d5c
KM
293{
294 int wait = usbhs_get_dparam(priv, buswait_bwait);
f1407d5c 295
11935de5
KM
296 /* set bus wait if platform have */
297 if (wait)
298 usbhs_bset(priv, BUSWAIT, 0x000F, wait);
f1407d5c
KM
299}
300
301/*
302 * platform default param
303 */
8ecef00f
UH
304
305/* commonly used on old SH-Mobile SoCs */
51f141a9
YS
306static struct renesas_usbhs_driver_pipe_config usbhsc_default_pipe[] = {
307 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false),
308 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, false),
309 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x18, false),
310 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x28, true),
311 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x38, true),
312 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true),
313 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false),
314 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false),
315 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false),
316 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x07, false),
f1407d5c
KM
317};
318
8ecef00f 319/* commonly used on newer SH-Mobile and R-Car SoCs */
51f141a9
YS
320static struct renesas_usbhs_driver_pipe_config usbhsc_new_pipe[] = {
321 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false),
322 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, true),
323 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x28, true),
324 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true),
325 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x58, true),
326 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x68, true),
327 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false),
328 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false),
329 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false),
330 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x78, true),
331 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x88, true),
332 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x98, true),
333 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xa8, true),
334 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xb8, true),
335 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xc8, true),
336 RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xd8, true),
8ecef00f
UH
337};
338
f1407d5c 339/*
6e267da8
KM
340 * power control
341 */
342static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable)
343{
f1ee56a0 344 struct platform_device *pdev = usbhs_priv_to_pdev(priv);
6e267da8
KM
345 struct device *dev = usbhs_priv_to_dev(priv);
346
347 if (enable) {
348 /* enable PM */
349 pm_runtime_get_sync(dev);
350
f1ee56a0
KM
351 /* enable platform power */
352 usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
353
6e267da8
KM
354 /* USB on */
355 usbhs_sys_clock_ctrl(priv, enable);
6e267da8
KM
356 } else {
357 /* USB off */
6e267da8
KM
358 usbhs_sys_clock_ctrl(priv, enable);
359
f1ee56a0
KM
360 /* disable platform power */
361 usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
362
6e267da8
KM
363 /* disable PM */
364 pm_runtime_put_sync(dev);
365 }
366}
367
368/*
ca8a282a 369 * hotplug
f1407d5c 370 */
ca8a282a 371static void usbhsc_hotplug(struct usbhs_priv *priv)
f1407d5c 372{
f1407d5c
KM
373 struct platform_device *pdev = usbhs_priv_to_pdev(priv);
374 struct usbhs_mod *mod = usbhs_mod_get_current(priv);
375 int id;
376 int enable;
d7b3968d 377 int cable;
f1407d5c
KM
378 int ret;
379
380 /*
381 * get vbus status from platform
382 */
383 enable = usbhs_platform_call(priv, get_vbus, pdev);
384
385 /*
386 * get id from platform
387 */
388 id = usbhs_platform_call(priv, get_id, pdev);
389
390 if (enable && !mod) {
d7b3968d 391 if (priv->edev) {
50297b79 392 cable = extcon_get_cable_state_(priv->edev, EXTCON_USB_HOST);
d7b3968d
SS
393 if ((cable > 0 && id != USBHS_HOST) ||
394 (!cable && id != USBHS_GADGET)) {
395 dev_info(&pdev->dev,
396 "USB cable plugged in doesn't match the selected role!\n");
397 return;
398 }
399 }
400
f1407d5c
KM
401 ret = usbhs_mod_change(priv, id);
402 if (ret < 0)
403 return;
404
405 dev_dbg(&pdev->dev, "%s enable\n", __func__);
406
6e267da8 407 /* power on */
b002ff6e
KM
408 if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
409 usbhsc_power_ctrl(priv, enable);
f1407d5c 410
258485d9
KM
411 /* bus init */
412 usbhsc_set_buswait(priv);
413 usbhsc_bus_init(priv);
414
f1407d5c
KM
415 /* module start */
416 usbhs_mod_call(priv, start, priv);
417
418 } else if (!enable && mod) {
419 dev_dbg(&pdev->dev, "%s disable\n", __func__);
420
421 /* module stop */
422 usbhs_mod_call(priv, stop, priv);
423
258485d9
KM
424 /* bus init */
425 usbhsc_bus_init(priv);
426
6e267da8 427 /* power off */
b002ff6e
KM
428 if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
429 usbhsc_power_ctrl(priv, enable);
f1407d5c
KM
430
431 usbhs_mod_change(priv, -1);
432
433 /* reset phy for next connection */
434 usbhs_platform_call(priv, phy_reset, pdev);
435 }
436}
437
ca8a282a
KM
438/*
439 * notify hotplug
440 */
441static void usbhsc_notify_hotplug(struct work_struct *work)
442{
443 struct usbhs_priv *priv = container_of(work,
444 struct usbhs_priv,
445 notify_hotplug_work.work);
446 usbhsc_hotplug(priv);
447}
448
b4fcea2a 449static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev)
f1407d5c 450{
206dcc2c 451 struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
bc57381e 452 int delay = usbhs_get_dparam(priv, detection_delay);
f1407d5c
KM
453
454 /*
455 * This functions will be called in interrupt.
456 * To make sure safety context,
457 * use workqueue for usbhs_notify_hotplug
458 */
a49a88f1
KM
459 schedule_delayed_work(&priv->notify_hotplug_work,
460 msecs_to_jiffies(delay));
f1407d5c
KM
461 return 0;
462}
463
464/*
465 * platform functions
466 */
b854100e
YS
467static const struct of_device_id usbhs_of_match[] = {
468 {
469 .compatible = "renesas,usbhs-r8a7790",
e0213bc5 470 .data = (void *)USBHS_TYPE_RCAR_GEN2,
b854100e
YS
471 },
472 {
473 .compatible = "renesas,usbhs-r8a7791",
e0213bc5 474 .data = (void *)USBHS_TYPE_RCAR_GEN2,
b854100e 475 },
af6e613b
YS
476 {
477 .compatible = "renesas,usbhs-r8a7794",
478 .data = (void *)USBHS_TYPE_RCAR_GEN2,
479 },
f5f6afa8 480 {
f5f6afa8 481 .compatible = "renesas,usbhs-r8a7795",
de18757e 482 .data = (void *)USBHS_TYPE_RCAR_GEN3,
f5f6afa8 483 },
aae819e1
YS
484 {
485 .compatible = "renesas,usbhs-r8a7796",
486 .data = (void *)USBHS_TYPE_RCAR_GEN3,
487 },
2f1a993a
SH
488 {
489 .compatible = "renesas,rcar-gen2-usbhs",
490 .data = (void *)USBHS_TYPE_RCAR_GEN2,
491 },
492 {
2f1a993a 493 .compatible = "renesas,rcar-gen3-usbhs",
de18757e 494 .data = (void *)USBHS_TYPE_RCAR_GEN3,
2f1a993a 495 },
b854100e
YS
496 { },
497};
498MODULE_DEVICE_TABLE(of, usbhs_of_match);
499
500static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev)
501{
502 struct renesas_usbhs_platform_info *info;
503 struct renesas_usbhs_driver_param *dparam;
504 const struct of_device_id *of_id = of_match_device(usbhs_of_match, dev);
505 u32 tmp;
506 int gpio;
507
508 info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
509 if (!info)
510 return NULL;
511
512 dparam = &info->driver_param;
9ae7ce00 513 dparam->type = of_id ? (uintptr_t)of_id->data : 0;
b854100e
YS
514 if (!of_property_read_u32(dev->of_node, "renesas,buswait", &tmp))
515 dparam->buswait_bwait = tmp;
516 gpio = of_get_named_gpio_flags(dev->of_node, "renesas,enable-gpio", 0,
517 NULL);
518 if (gpio > 0)
519 dparam->enable_gpio = gpio;
520
772ce812
YS
521 if (dparam->type == USBHS_TYPE_RCAR_GEN2 ||
522 dparam->type == USBHS_TYPE_RCAR_GEN3)
ab330cf3 523 dparam->has_usb_dmac = 1;
ab330cf3 524
b854100e
YS
525 return info;
526}
527
b7a8d17d 528static int usbhs_probe(struct platform_device *pdev)
f1407d5c 529{
ace0a5f9 530 struct renesas_usbhs_platform_info *info = dev_get_platdata(&pdev->dev);
f1407d5c
KM
531 struct renesas_usbhs_driver_callback *dfunc;
532 struct usbhs_priv *priv;
53069af3 533 struct resource *res, *irq_res;
f1407d5c
KM
534 int ret;
535
b854100e
YS
536 /* check device node */
537 if (pdev->dev.of_node)
538 info = pdev->dev.platform_data = usbhs_parse_dt(&pdev->dev);
539
f1407d5c 540 /* check platform information */
8ecef00f 541 if (!info) {
f1407d5c
KM
542 dev_err(&pdev->dev, "no platform information\n");
543 return -EINVAL;
544 }
545
546 /* platform data */
53069af3 547 irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
687f16b8 548 if (!irq_res) {
f1407d5c
KM
549 dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n");
550 return -ENODEV;
551 }
552
553 /* usb private data */
58efc77c 554 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
b1cb07cd 555 if (!priv)
f1407d5c 556 return -ENOMEM;
f1407d5c 557
687f16b8 558 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
148e1134
TR
559 priv->base = devm_ioremap_resource(&pdev->dev, res);
560 if (IS_ERR(priv->base))
561 return PTR_ERR(priv->base);
f1407d5c 562
d7b3968d
SS
563 if (of_property_read_bool(pdev->dev.of_node, "extcon")) {
564 priv->edev = extcon_get_edev_by_phandle(&pdev->dev, 0);
565 if (IS_ERR(priv->edev))
566 return PTR_ERR(priv->edev);
567 }
568
f1407d5c
KM
569 /*
570 * care platform info
571 */
8ecef00f 572
48298206
KM
573 memcpy(&priv->dparam,
574 &info->driver_param,
575 sizeof(struct renesas_usbhs_driver_param));
f1407d5c 576
8ecef00f 577 switch (priv->dparam.type) {
e0213bc5 578 case USBHS_TYPE_RCAR_GEN2:
8ecef00f 579 priv->pfunc = usbhs_rcar2_ops;
51f141a9
YS
580 if (!priv->dparam.pipe_configs) {
581 priv->dparam.pipe_configs = usbhsc_new_pipe;
de18757e
YS
582 priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
583 }
584 break;
585 case USBHS_TYPE_RCAR_GEN3:
586 priv->pfunc = usbhs_rcar3_ops;
587 if (!priv->dparam.pipe_configs) {
588 priv->dparam.pipe_configs = usbhsc_new_pipe;
51f141a9 589 priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
8ecef00f
UH
590 }
591 break;
592 default:
593 if (!info->platform_callback.get_id) {
594 dev_err(&pdev->dev, "no platform callbacks");
595 return -EINVAL;
596 }
597 memcpy(&priv->pfunc,
598 &info->platform_callback,
599 sizeof(struct renesas_usbhs_platform_callback));
600 break;
601 }
602
f1407d5c
KM
603 /* set driver callback functions for platform */
604 dfunc = &info->driver_callback;
605 dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug;
606
607 /* set default param if platform doesn't have */
51f141a9
YS
608 if (!priv->dparam.pipe_configs) {
609 priv->dparam.pipe_configs = usbhsc_default_pipe;
610 priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe);
f1407d5c 611 }
48298206
KM
612 if (!priv->dparam.pio_dma_border)
613 priv->dparam.pio_dma_border = 64; /* 64byte */
f1407d5c 614
b002ff6e
KM
615 /* FIXME */
616 /* runtime power control ? */
48298206 617 if (priv->pfunc.get_vbus)
b002ff6e
KM
618 usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL);
619
f1407d5c
KM
620 /*
621 * priv settings
622 */
53069af3
SY
623 priv->irq = irq_res->start;
624 if (irq_res->flags & IORESOURCE_IRQ_SHAREABLE)
625 priv->irqflags = IRQF_SHARED;
f1407d5c 626 priv->pdev = pdev;
bc57381e 627 INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug);
f1407d5c
KM
628 spin_lock_init(usbhs_priv_to_lock(priv));
629
630 /* call pipe and module init */
631 ret = usbhs_pipe_probe(priv);
632 if (ret < 0)
58efc77c 633 return ret;
f1407d5c 634
d3af90a5 635 ret = usbhs_fifo_probe(priv);
f1407d5c 636 if (ret < 0)
97f93227 637 goto probe_end_pipe_exit;
f1407d5c 638
d3af90a5
KM
639 ret = usbhs_mod_probe(priv);
640 if (ret < 0)
641 goto probe_end_fifo_exit;
642
f1407d5c 643 /* dev_set_drvdata should be called after usbhs_mod_init */
c9a0552e 644 platform_set_drvdata(pdev, priv);
f1407d5c
KM
645
646 /*
647 * deviece reset here because
648 * USB device might be used in boot loader.
649 */
650 usbhs_sys_clock_ctrl(priv, 0);
651
8ecef00f
UH
652 /* check GPIO determining if USB function should be enabled */
653 if (priv->dparam.enable_gpio) {
654 gpio_request_one(priv->dparam.enable_gpio, GPIOF_IN, NULL);
655 ret = !gpio_get_value(priv->dparam.enable_gpio);
656 gpio_free(priv->dparam.enable_gpio);
657 if (ret) {
658 dev_warn(&pdev->dev,
659 "USB function not selected (GPIO %d)\n",
660 priv->dparam.enable_gpio);
661 ret = -ENOTSUPP;
662 goto probe_end_mod_exit;
663 }
664 }
665
f1407d5c
KM
666 /*
667 * platform call
668 *
669 * USB phy setup might depend on CPU/Board.
670 * If platform has its callback functions,
671 * call it here.
672 */
673 ret = usbhs_platform_call(priv, hardware_init, pdev);
674 if (ret < 0) {
48ac1e57 675 dev_err(&pdev->dev, "platform init failed.\n");
97f93227 676 goto probe_end_mod_exit;
f1407d5c
KM
677 }
678
679 /* reset phy for connection */
680 usbhs_platform_call(priv, phy_reset, pdev);
681
b002ff6e
KM
682 /* power control */
683 pm_runtime_enable(&pdev->dev);
684 if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) {
685 usbhsc_power_ctrl(priv, 1);
686 usbhs_mod_autonomy_mode(priv);
687 }
688
f1407d5c
KM
689 /*
690 * manual call notify_hotplug for cold plug
691 */
368504c0 692 usbhsc_drvcllbck_notify_hotplug(pdev);
f1407d5c
KM
693
694 dev_info(&pdev->dev, "probed\n");
695
696 return ret;
697
f1407d5c
KM
698probe_end_mod_exit:
699 usbhs_mod_remove(priv);
d3af90a5
KM
700probe_end_fifo_exit:
701 usbhs_fifo_remove(priv);
97f93227
KM
702probe_end_pipe_exit:
703 usbhs_pipe_remove(priv);
f1407d5c 704
0d799503 705 dev_info(&pdev->dev, "probe failed (%d)\n", ret);
f1407d5c
KM
706
707 return ret;
708}
709
fb4e98ab 710static int usbhs_remove(struct platform_device *pdev)
f1407d5c 711{
206dcc2c 712 struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
ace0a5f9 713 struct renesas_usbhs_platform_info *info = dev_get_platdata(&pdev->dev);
af32fe51 714 struct renesas_usbhs_driver_callback *dfunc = &info->driver_callback;
f1407d5c
KM
715
716 dev_dbg(&pdev->dev, "usb remove\n");
717
af32fe51
KM
718 dfunc->notify_hotplug = NULL;
719
b002ff6e
KM
720 /* power off */
721 if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
722 usbhsc_power_ctrl(priv, 0);
f1407d5c 723
b002ff6e 724 pm_runtime_disable(&pdev->dev);
f1407d5c
KM
725
726 usbhs_platform_call(priv, hardware_exit, pdev);
f1407d5c 727 usbhs_mod_remove(priv);
d3af90a5 728 usbhs_fifo_remove(priv);
97f93227 729 usbhs_pipe_remove(priv);
f1407d5c
KM
730
731 return 0;
732}
733
ca8a282a
KM
734static int usbhsc_suspend(struct device *dev)
735{
736 struct usbhs_priv *priv = dev_get_drvdata(dev);
737 struct usbhs_mod *mod = usbhs_mod_get_current(priv);
738
739 if (mod) {
740 usbhs_mod_call(priv, stop, priv);
741 usbhs_mod_change(priv, -1);
742 }
743
744 if (mod || !usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
745 usbhsc_power_ctrl(priv, 0);
746
747 return 0;
748}
749
750static int usbhsc_resume(struct device *dev)
751{
752 struct usbhs_priv *priv = dev_get_drvdata(dev);
753 struct platform_device *pdev = usbhs_priv_to_pdev(priv);
754
ca8a282a
KM
755 if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL))
756 usbhsc_power_ctrl(priv, 1);
757
5b50d3b5
KM
758 usbhs_platform_call(priv, phy_reset, pdev);
759
760 usbhsc_drvcllbck_notify_hotplug(pdev);
ca8a282a
KM
761
762 return 0;
763}
764
765static int usbhsc_runtime_nop(struct device *dev)
766{
767 /* Runtime PM callback shared between ->runtime_suspend()
768 * and ->runtime_resume(). Simply returns success.
769 *
770 * This driver re-initializes all registers after
771 * pm_runtime_get_sync() anyway so there is no need
772 * to save and restore registers here.
773 */
774 return 0;
775}
776
777static const struct dev_pm_ops usbhsc_pm_ops = {
778 .suspend = usbhsc_suspend,
779 .resume = usbhsc_resume,
780 .runtime_suspend = usbhsc_runtime_nop,
781 .runtime_resume = usbhsc_runtime_nop,
782};
783
f1407d5c
KM
784static struct platform_driver renesas_usbhs_driver = {
785 .driver = {
786 .name = "renesas_usbhs",
ca8a282a 787 .pm = &usbhsc_pm_ops,
b854100e 788 .of_match_table = of_match_ptr(usbhs_of_match),
f1407d5c
KM
789 },
790 .probe = usbhs_probe,
7690417d 791 .remove = usbhs_remove,
f1407d5c
KM
792};
793
cc27c96c 794module_platform_driver(renesas_usbhs_driver);
f1407d5c
KM
795
796MODULE_LICENSE("GPL");
797MODULE_DESCRIPTION("Renesas USB driver");
798MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
This page took 0.37683 seconds and 5 git commands to generate.