Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * IPWireless 3G UMTS TDD Modem driver (USB connected) | |
3 | * | |
4 | * Copyright (C) 2004 Roelf Diedericks <roelfd@inet.co.za> | |
5 | * Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com> | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation; either version 2 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * All information about the device was acquired using SnoopyPro | |
6d1d1698 | 13 | * on MSFT's O/S, and examing the MSFT drivers' debug output |
1da177e4 LT |
14 | * (insanely left _on_ in the enduser version) |
15 | * | |
16 | * It was written out of frustration with the IPWireless USB modem | |
17 | * supplied by Axity3G/Sentech South Africa not supporting | |
18 | * Linux whatsoever. | |
19 | * | |
6d1d1698 | 20 | * Nobody provided any proprietary information that was not already |
1da177e4 | 21 | * available for this device. |
6d1d1698 AC |
22 | * |
23 | * The modem adheres to the "3GPP TS 27.007 AT command set for 3G | |
24 | * User Equipment (UE)" standard, available from | |
1da177e4 LT |
25 | * http://www.3gpp.org/ftp/Specs/html-info/27007.htm |
26 | * | |
27 | * The code was only tested the IPWireless handheld modem distributed | |
28 | * in South Africa by Sentech. | |
6d1d1698 | 29 | * |
1da177e4 LT |
30 | * It may work for Woosh Inc in .nz too, as it appears they use the |
31 | * same kit. | |
32 | * | |
6d1d1698 | 33 | * There is still some work to be done in terms of handling |
1da177e4 LT |
34 | * DCD, DTR, RTS, CTS which are currently faked. |
35 | * It's good enough for PPP at this point. It's based off all kinds of | |
36 | * code found in usb/serial and usb/class | |
37 | * | |
38 | */ | |
39 | ||
40 | #include <linux/kernel.h> | |
41 | #include <linux/errno.h> | |
42 | #include <linux/init.h> | |
43 | #include <linux/slab.h> | |
44 | #include <linux/tty.h> | |
45 | #include <linux/tty_flip.h> | |
46 | #include <linux/module.h> | |
47 | #include <linux/spinlock.h> | |
48 | #include <linux/usb.h> | |
a969888c | 49 | #include <linux/usb/serial.h> |
6d1d1698 | 50 | #include <linux/uaccess.h> |
1da177e4 LT |
51 | |
52 | /* | |
53 | * Version Information | |
54 | */ | |
55 | #define DRIVER_VERSION "v0.3" | |
56 | #define DRIVER_AUTHOR "Roelf Diedericks" | |
57 | #define DRIVER_DESC "IPWireless tty driver" | |
58 | ||
59 | #define IPW_TTY_MAJOR 240 /* real device node major id, experimental range */ | |
60 | #define IPW_TTY_MINORS 256 /* we support 256 devices, dunno why, it'd be insane :) */ | |
61 | ||
62 | #define USB_IPW_MAGIC 0x6d02 /* magic number for ipw struct */ | |
63 | ||
64 | ||
65 | /* Message sizes */ | |
66 | #define EVENT_BUFFER_SIZE 0xFF | |
6d1d1698 | 67 | #define CHAR2INT16(c1, c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff)) |
1da177e4 LT |
68 | #define NUM_BULK_URBS 24 |
69 | #define NUM_CONTROL_URBS 16 | |
70 | ||
71 | /* vendor/product pairs that are known work with this driver*/ | |
72 | #define IPW_VID 0x0bc3 | |
73 | #define IPW_PID 0x0001 | |
74 | ||
75 | ||
76 | /* Vendor commands: */ | |
77 | ||
78 | /* baud rates */ | |
79 | enum { | |
80 | ipw_sio_b256000 = 0x000e, | |
81 | ipw_sio_b128000 = 0x001d, | |
82 | ipw_sio_b115200 = 0x0020, | |
83 | ipw_sio_b57600 = 0x0040, | |
84 | ipw_sio_b56000 = 0x0042, | |
85 | ipw_sio_b38400 = 0x0060, | |
86 | ipw_sio_b19200 = 0x00c0, | |
87 | ipw_sio_b14400 = 0x0100, | |
88 | ipw_sio_b9600 = 0x0180, | |
89 | ipw_sio_b4800 = 0x0300, | |
90 | ipw_sio_b2400 = 0x0600, | |
91 | ipw_sio_b1200 = 0x0c00, | |
92 | ipw_sio_b600 = 0x1800 | |
93 | }; | |
94 | ||
95 | /* data bits */ | |
96 | #define ipw_dtb_7 0x700 | |
6d1d1698 AC |
97 | #define ipw_dtb_8 0x810 /* ok so the define is misleading, I know, but forces 8,n,1 */ |
98 | /* I mean, is there a point to any other setting these days? :) */ | |
1da177e4 LT |
99 | |
100 | /* usb control request types : */ | |
6d1d1698 AC |
101 | #define IPW_SIO_RXCTL 0x00 /* control bulk rx channel transmissions, value=1/0 (on/off) */ |
102 | #define IPW_SIO_SET_BAUD 0x01 /* set baud, value=requested ipw_sio_bxxxx */ | |
103 | #define IPW_SIO_SET_LINE 0x03 /* set databits, parity. value=ipw_dtb_x */ | |
104 | #define IPW_SIO_SET_PIN 0x03 /* set/clear dtr/rts value=ipw_pin_xxx */ | |
105 | #define IPW_SIO_POLL 0x08 /* get serial port status byte, call with value=0 */ | |
106 | #define IPW_SIO_INIT 0x11 /* initializes ? value=0 (appears as first thing todo on open) */ | |
107 | #define IPW_SIO_PURGE 0x12 /* purge all transmissions?, call with value=numchar_to_purge */ | |
108 | #define IPW_SIO_HANDFLOW 0x13 /* set xon/xoff limits value=0, and a buffer of 0x10 bytes */ | |
109 | #define IPW_SIO_SETCHARS 0x13 /* set the flowcontrol special chars, value=0, buf=6 bytes, */ | |
110 | /* last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13 */ | |
1da177e4 LT |
111 | |
112 | /* values used for request IPW_SIO_SET_PIN */ | |
113 | #define IPW_PIN_SETDTR 0x101 | |
114 | #define IPW_PIN_SETRTS 0x202 | |
115 | #define IPW_PIN_CLRDTR 0x100 | |
6d1d1698 | 116 | #define IPW_PIN_CLRRTS 0x200 /* unconfirmed */ |
1da177e4 LT |
117 | |
118 | /* values used for request IPW_SIO_RXCTL */ | |
119 | #define IPW_RXBULK_ON 1 | |
120 | #define IPW_RXBULK_OFF 0 | |
121 | ||
122 | /* various 16 byte hardcoded transferbuffers used by flow control */ | |
6d1d1698 AC |
123 | #define IPW_BYTES_FLOWINIT { 0x01, 0, 0, 0, 0x40, 0, 0, 0, \ |
124 | 0, 0, 0, 0, 0, 0, 0, 0 } | |
1da177e4 LT |
125 | |
126 | /* Interpretation of modem status lines */ | |
127 | /* These need sorting out by individually connecting pins and checking | |
128 | * results. FIXME! | |
129 | * When data is being sent we see 0x30 in the lower byte; this must | |
130 | * contain DSR and CTS ... | |
131 | */ | |
132 | #define IPW_DSR ((1<<4) | (1<<5)) | |
133 | #define IPW_CTS ((1<<5) | (1<<4)) | |
134 | ||
135 | #define IPW_WANTS_TO_SEND 0x30 | |
1da177e4 | 136 | |
7d40d7e8 | 137 | static const struct usb_device_id usb_ipw_ids[] = { |
1da177e4 LT |
138 | { USB_DEVICE(IPW_VID, IPW_PID) }, |
139 | { }, | |
140 | }; | |
141 | ||
142 | MODULE_DEVICE_TABLE(usb, usb_ipw_ids); | |
143 | ||
144 | static struct usb_driver usb_ipw_driver = { | |
1da177e4 LT |
145 | .name = "ipwtty", |
146 | .probe = usb_serial_probe, | |
147 | .disconnect = usb_serial_disconnect, | |
148 | .id_table = usb_ipw_ids, | |
ba9dc657 | 149 | .no_dynamic_id = 1, |
1da177e4 LT |
150 | }; |
151 | ||
152 | static int debug; | |
153 | ||
7d12e780 | 154 | static void ipw_read_bulk_callback(struct urb *urb) |
1da177e4 LT |
155 | { |
156 | struct usb_serial_port *port = urb->context; | |
157 | unsigned char *data = urb->transfer_buffer; | |
158 | struct tty_struct *tty; | |
1da177e4 | 159 | int result; |
b4a15797 | 160 | int status = urb->status; |
1da177e4 | 161 | |
441b62c1 | 162 | dbg("%s - port %d", __func__, port->number); |
1da177e4 | 163 | |
b4a15797 GKH |
164 | if (status) { |
165 | dbg("%s - nonzero read bulk status received: %d", | |
441b62c1 | 166 | __func__, status); |
1da177e4 LT |
167 | return; |
168 | } | |
169 | ||
6d1d1698 AC |
170 | usb_serial_debug_data(debug, &port->dev, __func__, |
171 | urb->actual_length, data); | |
1da177e4 | 172 | |
4a90f09b | 173 | tty = tty_port_tty_get(&port->port); |
1da177e4 | 174 | if (tty && urb->actual_length) { |
33f0f88f | 175 | tty_insert_flip_string(tty, data, urb->actual_length); |
1da177e4 LT |
176 | tty_flip_buffer_push(tty); |
177 | } | |
4a90f09b | 178 | tty_kref_put(tty); |
1da177e4 LT |
179 | |
180 | /* Continue trying to always read */ | |
6d1d1698 AC |
181 | usb_fill_bulk_urb(port->read_urb, port->serial->dev, |
182 | usb_rcvbulkpipe(port->serial->dev, | |
1da177e4 | 183 | port->bulk_in_endpointAddress), |
6d1d1698 AC |
184 | port->read_urb->transfer_buffer, |
185 | port->read_urb->transfer_buffer_length, | |
186 | ipw_read_bulk_callback, port); | |
1da177e4 LT |
187 | result = usb_submit_urb(port->read_urb, GFP_ATOMIC); |
188 | if (result) | |
6d1d1698 AC |
189 | dev_err(&port->dev, |
190 | "%s - failed resubmitting read urb, error %d\n", | |
191 | __func__, result); | |
1da177e4 LT |
192 | return; |
193 | } | |
194 | ||
a509a7e4 | 195 | static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) |
1da177e4 LT |
196 | { |
197 | struct usb_device *dev = port->serial->dev; | |
198 | u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT; | |
199 | u8 *buf_flow_init; | |
200 | int result; | |
201 | ||
441b62c1 | 202 | dbg("%s", __func__); |
1da177e4 | 203 | |
5d7efe5b | 204 | buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL); |
1da177e4 LT |
205 | if (!buf_flow_init) |
206 | return -ENOMEM; | |
1da177e4 | 207 | |
6d1d1698 AC |
208 | /* --1: Tell the modem to initialize (we think) From sniffs this is |
209 | * always the first thing that gets sent to the modem during | |
210 | * opening of the device */ | |
211 | dbg("%s: Sending SIO_INIT (we guess)", __func__); | |
212 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), | |
213 | IPW_SIO_INIT, | |
214 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
215 | 0, | |
216 | 0, /* index */ | |
217 | NULL, | |
218 | 0, | |
219 | 100000); | |
1da177e4 | 220 | if (result < 0) |
6d1d1698 AC |
221 | dev_err(&port->dev, |
222 | "Init of modem failed (error = %d)\n", result); | |
1da177e4 LT |
223 | |
224 | /* reset the bulk pipes */ | |
6d1d1698 AC |
225 | usb_clear_halt(dev, |
226 | usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress)); | |
227 | usb_clear_halt(dev, | |
228 | usb_sndbulkpipe(dev, port->bulk_out_endpointAddress)); | |
1da177e4 | 229 | |
6d1d1698 AC |
230 | /*--2: Start reading from the device */ |
231 | dbg("%s: setting up bulk read callback", __func__); | |
1da177e4 LT |
232 | usb_fill_bulk_urb(port->read_urb, dev, |
233 | usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress), | |
234 | port->bulk_in_buffer, | |
235 | port->bulk_in_size, | |
236 | ipw_read_bulk_callback, port); | |
237 | result = usb_submit_urb(port->read_urb, GFP_KERNEL); | |
238 | if (result < 0) | |
6d1d1698 AC |
239 | dbg("%s - usb_submit_urb(read bulk) failed with status %d", |
240 | __func__, result); | |
1da177e4 LT |
241 | |
242 | /*--3: Tell the modem to open the floodgates on the rx bulk channel */ | |
6d1d1698 | 243 | dbg("%s:asking modem for RxRead (RXBULK_ON)", __func__); |
1da177e4 | 244 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
6d1d1698 AC |
245 | IPW_SIO_RXCTL, |
246 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
247 | IPW_RXBULK_ON, | |
248 | 0, /* index */ | |
249 | NULL, | |
250 | 0, | |
251 | 100000); | |
252 | if (result < 0) | |
253 | dev_err(&port->dev, | |
254 | "Enabling bulk RxRead failed (error = %d)\n", result); | |
1da177e4 LT |
255 | |
256 | /*--4: setup the initial flowcontrol */ | |
6d1d1698 | 257 | dbg("%s:setting init flowcontrol (%s)", __func__, buf_flow_init); |
1da177e4 | 258 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
6d1d1698 AC |
259 | IPW_SIO_HANDFLOW, |
260 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
261 | 0, | |
262 | 0, | |
263 | buf_flow_init, | |
264 | 0x10, | |
265 | 200000); | |
1da177e4 | 266 | if (result < 0) |
6d1d1698 AC |
267 | dev_err(&port->dev, |
268 | "initial flowcontrol failed (error = %d)\n", result); | |
1da177e4 LT |
269 | |
270 | ||
271 | /*--5: raise the dtr */ | |
6d1d1698 | 272 | dbg("%s:raising dtr", __func__); |
1da177e4 | 273 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
6d1d1698 AC |
274 | IPW_SIO_SET_PIN, |
275 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
276 | IPW_PIN_SETDTR, | |
277 | 0, | |
278 | NULL, | |
279 | 0, | |
280 | 200000); | |
1da177e4 | 281 | if (result < 0) |
6d1d1698 AC |
282 | dev_err(&port->dev, |
283 | "setting dtr failed (error = %d)\n", result); | |
1da177e4 LT |
284 | |
285 | /*--6: raise the rts */ | |
6d1d1698 | 286 | dbg("%s:raising rts", __func__); |
1da177e4 | 287 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
6d1d1698 AC |
288 | IPW_SIO_SET_PIN, |
289 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
290 | IPW_PIN_SETRTS, | |
291 | 0, | |
292 | NULL, | |
293 | 0, | |
294 | 200000); | |
1da177e4 | 295 | if (result < 0) |
6d1d1698 AC |
296 | dev_err(&port->dev, |
297 | "setting dtr failed (error = %d)\n", result); | |
298 | ||
1da177e4 LT |
299 | kfree(buf_flow_init); |
300 | return 0; | |
301 | } | |
302 | ||
335f8514 | 303 | static void ipw_dtr_rts(struct usb_serial_port *port, int on) |
1da177e4 LT |
304 | { |
305 | struct usb_device *dev = port->serial->dev; | |
306 | int result; | |
307 | ||
1da177e4 | 308 | /*--1: drop the dtr */ |
6d1d1698 | 309 | dbg("%s:dropping dtr", __func__); |
1da177e4 | 310 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
6d1d1698 AC |
311 | IPW_SIO_SET_PIN, |
312 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
335f8514 | 313 | on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR, |
6d1d1698 AC |
314 | 0, |
315 | NULL, | |
316 | 0, | |
317 | 200000); | |
1da177e4 | 318 | if (result < 0) |
6d1d1698 AC |
319 | dev_err(&port->dev, "dropping dtr failed (error = %d)\n", |
320 | result); | |
1da177e4 LT |
321 | |
322 | /*--2: drop the rts */ | |
6d1d1698 | 323 | dbg("%s:dropping rts", __func__); |
1da177e4 | 324 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
6d1d1698 AC |
325 | IPW_SIO_SET_PIN, USB_TYPE_VENDOR | |
326 | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
335f8514 | 327 | on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS, |
6d1d1698 AC |
328 | 0, |
329 | NULL, | |
330 | 0, | |
331 | 200000); | |
1da177e4 | 332 | if (result < 0) |
6d1d1698 AC |
333 | dev_err(&port->dev, |
334 | "dropping rts failed (error = %d)\n", result); | |
335f8514 | 335 | } |
1da177e4 | 336 | |
335f8514 AC |
337 | static void ipw_close(struct usb_serial_port *port) |
338 | { | |
339 | struct usb_device *dev = port->serial->dev; | |
340 | int result; | |
1da177e4 LT |
341 | |
342 | /*--3: purge */ | |
6d1d1698 | 343 | dbg("%s:sending purge", __func__); |
1da177e4 | 344 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
6d1d1698 AC |
345 | IPW_SIO_PURGE, USB_TYPE_VENDOR | |
346 | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
347 | 0x03, | |
348 | 0, | |
349 | NULL, | |
350 | 0, | |
351 | 200000); | |
1da177e4 | 352 | if (result < 0) |
898eb71c | 353 | dev_err(&port->dev, "purge failed (error = %d)\n", result); |
1da177e4 LT |
354 | |
355 | ||
6d1d1698 AC |
356 | /* send RXBULK_off (tell modem to stop transmitting bulk data on |
357 | rx chan) */ | |
1da177e4 | 358 | result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
6d1d1698 AC |
359 | IPW_SIO_RXCTL, |
360 | USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, | |
361 | IPW_RXBULK_OFF, | |
362 | 0, /* index */ | |
363 | NULL, | |
364 | 0, | |
365 | 100000); | |
1da177e4 LT |
366 | |
367 | if (result < 0) | |
6d1d1698 AC |
368 | dev_err(&port->dev, |
369 | "Disabling bulk RxRead failed (error = %d)\n", result); | |
1da177e4 LT |
370 | |
371 | /* shutdown any in-flight urbs that we know about */ | |
372 | usb_kill_urb(port->read_urb); | |
373 | usb_kill_urb(port->write_urb); | |
374 | } | |
375 | ||
7d12e780 | 376 | static void ipw_write_bulk_callback(struct urb *urb) |
1da177e4 LT |
377 | { |
378 | struct usb_serial_port *port = urb->context; | |
b4a15797 | 379 | int status = urb->status; |
1da177e4 | 380 | |
441b62c1 | 381 | dbg("%s", __func__); |
1da177e4 | 382 | |
b2f1b0d4 BO |
383 | port->write_urb_busy = 0; |
384 | ||
b4a15797 GKH |
385 | if (status) |
386 | dbg("%s - nonzero write bulk status received: %d", | |
441b62c1 | 387 | __func__, status); |
1da177e4 | 388 | |
cf2c7481 | 389 | usb_serial_port_softint(port); |
1da177e4 LT |
390 | } |
391 | ||
95da310e AC |
392 | static int ipw_write(struct tty_struct *tty, struct usb_serial_port *port, |
393 | const unsigned char *buf, int count) | |
1da177e4 LT |
394 | { |
395 | struct usb_device *dev = port->serial->dev; | |
396 | int ret; | |
397 | ||
441b62c1 | 398 | dbg("%s: TOP: count=%d, in_interrupt=%ld", __func__, |
6d1d1698 | 399 | count, in_interrupt()); |
1da177e4 LT |
400 | |
401 | if (count == 0) { | |
441b62c1 | 402 | dbg("%s - write request of 0 bytes", __func__); |
1da177e4 LT |
403 | return 0; |
404 | } | |
507ca9bc | 405 | |
e81ee637 | 406 | spin_lock_bh(&port->lock); |
507ca9bc | 407 | if (port->write_urb_busy) { |
e81ee637 | 408 | spin_unlock_bh(&port->lock); |
441b62c1 | 409 | dbg("%s - already writing", __func__); |
1da177e4 | 410 | return 0; |
507ca9bc GKH |
411 | } |
412 | port->write_urb_busy = 1; | |
e81ee637 | 413 | spin_unlock_bh(&port->lock); |
1da177e4 LT |
414 | |
415 | count = min(count, port->bulk_out_size); | |
416 | memcpy(port->bulk_out_buffer, buf, count); | |
417 | ||
441b62c1 | 418 | dbg("%s count now:%d", __func__, count); |
507ca9bc | 419 | |
1da177e4 LT |
420 | usb_fill_bulk_urb(port->write_urb, dev, |
421 | usb_sndbulkpipe(dev, port->bulk_out_endpointAddress), | |
422 | port->write_urb->transfer_buffer, | |
423 | count, | |
424 | ipw_write_bulk_callback, | |
425 | port); | |
426 | ||
427 | ret = usb_submit_urb(port->write_urb, GFP_ATOMIC); | |
428 | if (ret != 0) { | |
507ca9bc | 429 | port->write_urb_busy = 0; |
6d1d1698 AC |
430 | dbg("%s - usb_submit_urb(write bulk) failed with error = %d", |
431 | __func__, ret); | |
1da177e4 LT |
432 | return ret; |
433 | } | |
434 | ||
441b62c1 | 435 | dbg("%s returning %d", __func__, count); |
1da177e4 | 436 | return count; |
6d1d1698 | 437 | } |
1da177e4 LT |
438 | |
439 | static int ipw_probe(struct usb_serial_port *port) | |
440 | { | |
441 | return 0; | |
442 | } | |
443 | ||
444 | static int ipw_disconnect(struct usb_serial_port *port) | |
445 | { | |
446 | usb_set_serial_port_data(port, NULL); | |
447 | return 0; | |
448 | } | |
449 | ||
ea65370d | 450 | static struct usb_serial_driver ipw_device = { |
18fcac35 GKH |
451 | .driver = { |
452 | .owner = THIS_MODULE, | |
269bda1c | 453 | .name = "ipw", |
18fcac35 | 454 | }, |
269bda1c | 455 | .description = "IPWireless converter", |
d9b1b787 | 456 | .usb_driver = &usb_ipw_driver, |
1da177e4 | 457 | .id_table = usb_ipw_ids, |
1da177e4 LT |
458 | .num_ports = 1, |
459 | .open = ipw_open, | |
460 | .close = ipw_close, | |
335f8514 | 461 | .dtr_rts = ipw_dtr_rts, |
1da177e4 LT |
462 | .port_probe = ipw_probe, |
463 | .port_remove = ipw_disconnect, | |
464 | .write = ipw_write, | |
465 | .write_bulk_callback = ipw_write_bulk_callback, | |
466 | .read_bulk_callback = ipw_read_bulk_callback, | |
467 | }; | |
468 | ||
469 | ||
470 | ||
5e5b0e5d | 471 | static int __init usb_ipw_init(void) |
1da177e4 LT |
472 | { |
473 | int retval; | |
474 | ||
475 | retval = usb_serial_register(&ipw_device); | |
476 | if (retval) | |
477 | return retval; | |
478 | retval = usb_register(&usb_ipw_driver); | |
479 | if (retval) { | |
480 | usb_serial_deregister(&ipw_device); | |
481 | return retval; | |
482 | } | |
c197a8db GKH |
483 | printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" |
484 | DRIVER_DESC "\n"); | |
1da177e4 LT |
485 | return 0; |
486 | } | |
487 | ||
5e5b0e5d | 488 | static void __exit usb_ipw_exit(void) |
1da177e4 LT |
489 | { |
490 | usb_deregister(&usb_ipw_driver); | |
491 | usb_serial_deregister(&ipw_device); | |
492 | } | |
493 | ||
494 | module_init(usb_ipw_init); | |
495 | module_exit(usb_ipw_exit); | |
496 | ||
497 | /* Module information */ | |
6d1d1698 AC |
498 | MODULE_AUTHOR(DRIVER_AUTHOR); |
499 | MODULE_DESCRIPTION(DRIVER_DESC); | |
1da177e4 LT |
500 | MODULE_LICENSE("GPL"); |
501 | ||
502 | module_param(debug, bool, S_IRUGO | S_IWUSR); | |
503 | MODULE_PARM_DESC(debug, "Debug enabled or not"); |