Commit | Line | Data |
---|---|---|
d277064e | 1 | /* |
2 | * Support for emulating SAT (ata pass through) on devices based | |
3 | * on the Cypress USB/ATA bridge supporting ATACB. | |
4 | * | |
5 | * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr) | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify it | |
8 | * under the terms of the GNU General Public License as published by the | |
9 | * Free Software Foundation; either version 2, or (at your option) any | |
10 | * later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, but | |
13 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
15 | * General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License along | |
18 | * with this program; if not, write to the Free Software Foundation, Inc., | |
19 | * 675 Mass Ave, Cambridge, MA 02139, USA. | |
20 | */ | |
21 | ||
fcdb5140 | 22 | #include <linux/module.h> |
d277064e | 23 | #include <scsi/scsi.h> |
24 | #include <scsi/scsi_cmnd.h> | |
25 | #include <scsi/scsi_eh.h> | |
26 | #include <linux/ata.h> | |
27 | ||
28 | #include "usb.h" | |
29 | #include "protocol.h" | |
30 | #include "scsiglue.h" | |
31 | #include "debug.h" | |
32 | ||
4246b06a MG |
33 | MODULE_DESCRIPTION("SAT support for Cypress USB/ATA bridges with ATACB"); |
34 | MODULE_AUTHOR("Matthieu Castet <castet.matthieu@free.fr>"); | |
35 | MODULE_LICENSE("GPL"); | |
fcdb5140 AS |
36 | |
37 | /* | |
38 | * The table of devices | |
39 | */ | |
40 | #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ | |
41 | vendorName, productName, useProtocol, useTransport, \ | |
42 | initFunction, flags) \ | |
43 | { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ | |
f61870ee | 44 | .driver_info = (flags) } |
fcdb5140 | 45 | |
60e3cfbd | 46 | static struct usb_device_id cypress_usb_ids[] = { |
fcdb5140 AS |
47 | # include "unusual_cypress.h" |
48 | { } /* Terminating entry */ | |
49 | }; | |
50 | MODULE_DEVICE_TABLE(usb, cypress_usb_ids); | |
51 | ||
52 | #undef UNUSUAL_DEV | |
53 | ||
54 | /* | |
55 | * The flags table | |
56 | */ | |
57 | #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ | |
58 | vendor_name, product_name, use_protocol, use_transport, \ | |
59 | init_function, Flags) \ | |
60 | { \ | |
61 | .vendorName = vendor_name, \ | |
62 | .productName = product_name, \ | |
63 | .useProtocol = use_protocol, \ | |
64 | .useTransport = use_transport, \ | |
65 | .initFunction = init_function, \ | |
66 | } | |
67 | ||
68 | static struct us_unusual_dev cypress_unusual_dev_list[] = { | |
69 | # include "unusual_cypress.h" | |
70 | { } /* Terminating entry */ | |
71 | }; | |
72 | ||
73 | #undef UNUSUAL_DEV | |
74 | ||
75 | ||
d277064e | 76 | /* |
77 | * ATACB is a protocol used on cypress usb<->ata bridge to | |
78 | * send raw ATA command over mass storage | |
79 | * There is a ATACB2 protocol that support LBA48 on newer chip. | |
80 | * More info that be found on cy7c68310_8.pdf and cy7c68300c_8.pdf | |
81 | * datasheet from cypress.com. | |
82 | */ | |
fcdb5140 | 83 | static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) |
d277064e | 84 | { |
85 | unsigned char save_cmnd[MAX_COMMAND_SIZE]; | |
86 | ||
87 | if (likely(srb->cmnd[0] != ATA_16 && srb->cmnd[0] != ATA_12)) { | |
88 | usb_stor_transparent_scsi_command(srb, us); | |
89 | return; | |
90 | } | |
91 | ||
92 | memcpy(save_cmnd, srb->cmnd, sizeof(save_cmnd)); | |
64a87b24 | 93 | memset(srb->cmnd, 0, MAX_COMMAND_SIZE); |
d277064e | 94 | |
95 | /* check if we support the command */ | |
96 | if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */ | |
97 | goto invalid_fld; | |
98 | /* check protocol */ | |
99 | switch((save_cmnd[1] >> 1) & 0xf) { | |
100 | case 3: /*no DATA */ | |
101 | case 4: /* PIO in */ | |
102 | case 5: /* PIO out */ | |
103 | break; | |
104 | default: | |
105 | goto invalid_fld; | |
106 | } | |
107 | ||
108 | /* first build the ATACB command */ | |
109 | srb->cmd_len = 16; | |
110 | ||
111 | srb->cmnd[0] = 0x24; /* bVSCBSignature : vendor-specific command | |
112 | this value can change, but most(all ?) manufacturers | |
113 | keep the cypress default : 0x24 */ | |
114 | srb->cmnd[1] = 0x24; /* bVSCBSubCommand : 0x24 for ATACB */ | |
115 | ||
116 | srb->cmnd[3] = 0xff - 1; /* features, sector count, lba low, lba med | |
117 | lba high, device, command are valid */ | |
118 | srb->cmnd[4] = 1; /* TransferBlockCount : 512 */ | |
119 | ||
120 | if (save_cmnd[0] == ATA_16) { | |
121 | srb->cmnd[ 6] = save_cmnd[ 4]; /* features */ | |
122 | srb->cmnd[ 7] = save_cmnd[ 6]; /* sector count */ | |
123 | srb->cmnd[ 8] = save_cmnd[ 8]; /* lba low */ | |
124 | srb->cmnd[ 9] = save_cmnd[10]; /* lba med */ | |
125 | srb->cmnd[10] = save_cmnd[12]; /* lba high */ | |
126 | srb->cmnd[11] = save_cmnd[13]; /* device */ | |
127 | srb->cmnd[12] = save_cmnd[14]; /* command */ | |
128 | ||
129 | if (save_cmnd[1] & 0x01) {/* extended bit set for LBA48 */ | |
130 | /* this could be supported by atacb2 */ | |
131 | if (save_cmnd[3] || save_cmnd[5] || save_cmnd[7] || save_cmnd[9] | |
132 | || save_cmnd[11]) | |
133 | goto invalid_fld; | |
134 | } | |
135 | } | |
136 | else { /* ATA12 */ | |
137 | srb->cmnd[ 6] = save_cmnd[3]; /* features */ | |
138 | srb->cmnd[ 7] = save_cmnd[4]; /* sector count */ | |
139 | srb->cmnd[ 8] = save_cmnd[5]; /* lba low */ | |
140 | srb->cmnd[ 9] = save_cmnd[6]; /* lba med */ | |
141 | srb->cmnd[10] = save_cmnd[7]; /* lba high */ | |
142 | srb->cmnd[11] = save_cmnd[8]; /* device */ | |
143 | srb->cmnd[12] = save_cmnd[9]; /* command */ | |
144 | ||
145 | } | |
146 | /* Filter SET_FEATURES - XFER MODE command */ | |
147 | if ((srb->cmnd[12] == ATA_CMD_SET_FEATURES) | |
148 | && (srb->cmnd[6] == SETFEATURES_XFER)) | |
149 | goto invalid_fld; | |
150 | ||
151 | if (srb->cmnd[12] == ATA_CMD_ID_ATA || srb->cmnd[12] == ATA_CMD_ID_ATAPI) | |
152 | srb->cmnd[2] |= (1<<7); /* set IdentifyPacketDevice for these cmds */ | |
153 | ||
154 | ||
155 | usb_stor_transparent_scsi_command(srb, us); | |
156 | ||
157 | /* if the device doesn't support ATACB | |
158 | */ | |
159 | if (srb->result == SAM_STAT_CHECK_CONDITION && | |
160 | memcmp(srb->sense_buffer, usb_stor_sense_invalidCDB, | |
161 | sizeof(usb_stor_sense_invalidCDB)) == 0) { | |
191648d0 | 162 | usb_stor_dbg(us, "cypress atacb not supported ???\n"); |
d277064e | 163 | goto end; |
164 | } | |
165 | ||
166 | /* if ck_cond flags is set, and there wasn't critical error, | |
167 | * build the special sense | |
168 | */ | |
169 | if ((srb->result != (DID_ERROR << 16) && | |
170 | srb->result != (DID_ABORT << 16)) && | |
171 | save_cmnd[2] & 0x20) { | |
172 | struct scsi_eh_save ses; | |
173 | unsigned char regs[8]; | |
174 | unsigned char *sb = srb->sense_buffer; | |
175 | unsigned char *desc = sb + 8; | |
176 | int tmp_result; | |
177 | ||
178 | /* build the command for | |
179 | * reading the ATA registers */ | |
1f4159c1 BH |
180 | scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs)); |
181 | ||
d277064e | 182 | /* we use the same command as before, but we set |
183 | * the read taskfile bit, for not executing atacb command, | |
184 | * but reading register selected in srb->cmnd[4] | |
185 | */ | |
1f4159c1 BH |
186 | srb->cmd_len = 16; |
187 | srb->cmnd = ses.cmnd; | |
d277064e | 188 | srb->cmnd[2] = 1; |
189 | ||
190 | usb_stor_transparent_scsi_command(srb, us); | |
1f4159c1 | 191 | memcpy(regs, srb->sense_buffer, sizeof(regs)); |
d277064e | 192 | tmp_result = srb->result; |
193 | scsi_eh_restore_cmnd(srb, &ses); | |
194 | /* we fail to get registers, report invalid command */ | |
195 | if (tmp_result != SAM_STAT_GOOD) | |
196 | goto invalid_fld; | |
197 | ||
198 | /* build the sense */ | |
199 | memset(sb, 0, SCSI_SENSE_BUFFERSIZE); | |
200 | ||
201 | /* set sk, asc for a good command */ | |
202 | sb[1] = RECOVERED_ERROR; | |
203 | sb[2] = 0; /* ATA PASS THROUGH INFORMATION AVAILABLE */ | |
204 | sb[3] = 0x1D; | |
205 | ||
206 | /* XXX we should generate sk, asc, ascq from status and error | |
207 | * regs | |
1f4159c1 BH |
208 | * (see 11.1 Error translation ATA device error to SCSI error |
209 | * map, and ata_to_sense_error from libata.) | |
d277064e | 210 | */ |
211 | ||
212 | /* Sense data is current and format is descriptor. */ | |
213 | sb[0] = 0x72; | |
214 | desc[0] = 0x09; /* ATA_RETURN_DESCRIPTOR */ | |
215 | ||
216 | /* set length of additional sense data */ | |
217 | sb[7] = 14; | |
218 | desc[1] = 12; | |
219 | ||
220 | /* Copy registers into sense buffer. */ | |
221 | desc[ 2] = 0x00; | |
222 | desc[ 3] = regs[1]; /* features */ | |
223 | desc[ 5] = regs[2]; /* sector count */ | |
224 | desc[ 7] = regs[3]; /* lba low */ | |
225 | desc[ 9] = regs[4]; /* lba med */ | |
226 | desc[11] = regs[5]; /* lba high */ | |
227 | desc[12] = regs[6]; /* device */ | |
228 | desc[13] = regs[7]; /* command */ | |
229 | ||
230 | srb->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; | |
231 | } | |
232 | goto end; | |
233 | invalid_fld: | |
234 | srb->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; | |
235 | ||
236 | memcpy(srb->sense_buffer, | |
237 | usb_stor_sense_invalidCDB, | |
238 | sizeof(usb_stor_sense_invalidCDB)); | |
239 | end: | |
240 | memcpy(srb->cmnd, save_cmnd, sizeof(save_cmnd)); | |
241 | if (srb->cmnd[0] == ATA_12) | |
242 | srb->cmd_len = 12; | |
243 | } | |
fcdb5140 AS |
244 | |
245 | ||
246 | static int cypress_probe(struct usb_interface *intf, | |
247 | const struct usb_device_id *id) | |
248 | { | |
249 | struct us_data *us; | |
250 | int result; | |
251 | ||
252 | result = usb_stor_probe1(&us, intf, id, | |
253 | (id - cypress_usb_ids) + cypress_unusual_dev_list); | |
254 | if (result) | |
255 | return result; | |
256 | ||
257 | us->protocol_name = "Transparent SCSI with Cypress ATACB"; | |
258 | us->proto_handler = cypress_atacb_passthrough; | |
259 | ||
260 | result = usb_stor_probe2(us); | |
261 | return result; | |
262 | } | |
263 | ||
264 | static struct usb_driver cypress_driver = { | |
265 | .name = "ums-cypress", | |
266 | .probe = cypress_probe, | |
267 | .disconnect = usb_stor_disconnect, | |
268 | .suspend = usb_stor_suspend, | |
269 | .resume = usb_stor_resume, | |
270 | .reset_resume = usb_stor_reset_resume, | |
271 | .pre_reset = usb_stor_pre_reset, | |
272 | .post_reset = usb_stor_post_reset, | |
273 | .id_table = cypress_usb_ids, | |
274 | .soft_unbind = 1, | |
e73b2db6 | 275 | .no_dynamic_id = 1, |
fcdb5140 AS |
276 | }; |
277 | ||
65db4305 | 278 | module_usb_driver(cypress_driver); |