Commit | Line | Data |
---|---|---|
f0183a33 FB |
1 | /* |
2 | * Transport & Protocol Driver for In-System Design, Inc. ISD200 ASIC | |
1da177e4 LT |
3 | * |
4 | * Current development and maintenance: | |
96de0e25 | 5 | * (C) 2001-2002 Björn Stenberg (bjorn@haxx.se) |
1da177e4 LT |
6 | * |
7 | * Developed with the assistance of: | |
8 | * (C) 2002 Alan Stern <stern@rowland.org> | |
9 | * | |
10 | * Initial work: | |
11 | * (C) 2000 In-System Design, Inc. (support@in-system.com) | |
12 | * | |
13 | * The ISD200 ASIC does not natively support ATA devices. The chip | |
14 | * does implement an interface, the ATA Command Block (ATACB) which provides | |
15 | * a means of passing ATA commands and ATA register accesses to a device. | |
16 | * | |
17 | * This program is free software; you can redistribute it and/or modify it | |
18 | * under the terms of the GNU General Public License as published by the | |
19 | * Free Software Foundation; either version 2, or (at your option) any | |
20 | * later version. | |
21 | * | |
22 | * This program is distributed in the hope that it will be useful, but | |
23 | * WITHOUT ANY WARRANTY; without even the implied warranty of | |
24 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
25 | * General Public License for more details. | |
26 | * | |
27 | * You should have received a copy of the GNU General Public License along | |
28 | * with this program; if not, write to the Free Software Foundation, Inc., | |
29 | * 675 Mass Ave, Cambridge, MA 02139, USA. | |
30 | * | |
31 | * History: | |
32 | * | |
33 | * 2002-10-19: Removed the specialized transfer routines. | |
34 | * (Alan Stern <stern@rowland.harvard.edu>) | |
35 | * 2001-02-24: Removed lots of duplicate code and simplified the structure. | |
36 | * (bjorn@haxx.se) | |
37 | * 2002-01-16: Fixed endianness bug so it works on the ppc arch. | |
38 | * (Luc Saillard <luc@saillard.org>) | |
39 | * 2002-01-17: All bitfields removed. | |
40 | * (bjorn@haxx.se) | |
41 | */ | |
42 | ||
43 | ||
44 | /* Include files */ | |
45 | ||
46 | #include <linux/jiffies.h> | |
47 | #include <linux/errno.h> | |
32d5493e | 48 | #include <linux/module.h> |
1da177e4 | 49 | #include <linux/slab.h> |
d8881cda | 50 | #include <linux/ata.h> |
1da177e4 | 51 | #include <linux/hdreg.h> |
48c23d3e | 52 | #include <linux/scatterlist.h> |
1da177e4 LT |
53 | |
54 | #include <scsi/scsi.h> | |
55 | #include <scsi/scsi_cmnd.h> | |
56 | #include <scsi/scsi_device.h> | |
57 | ||
58 | #include "usb.h" | |
59 | #include "transport.h" | |
60 | #include "protocol.h" | |
61 | #include "debug.h" | |
62 | #include "scsiglue.h" | |
32d5493e | 63 | |
aa519be3 AM |
64 | #define DRV_NAME "ums-isd200" |
65 | ||
4246b06a | 66 | MODULE_DESCRIPTION("Driver for In-System Design, Inc. ISD200 ASIC"); |
d36b6910 | 67 | MODULE_AUTHOR("Björn Stenberg <bjorn@haxx.se>"); |
4246b06a | 68 | MODULE_LICENSE("GPL"); |
32d5493e AS |
69 | |
70 | static int isd200_Initialization(struct us_data *us); | |
71 | ||
72 | ||
73 | /* | |
74 | * The table of devices | |
75 | */ | |
76 | #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ | |
77 | vendorName, productName, useProtocol, useTransport, \ | |
78 | initFunction, flags) \ | |
79 | { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ | |
f61870ee | 80 | .driver_info = (flags) } |
32d5493e | 81 | |
e7724baf | 82 | static struct usb_device_id isd200_usb_ids[] = { |
32d5493e AS |
83 | # include "unusual_isd200.h" |
84 | { } /* Terminating entry */ | |
85 | }; | |
86 | MODULE_DEVICE_TABLE(usb, isd200_usb_ids); | |
87 | ||
88 | #undef UNUSUAL_DEV | |
32d5493e AS |
89 | |
90 | /* | |
91 | * The flags table | |
92 | */ | |
93 | #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ | |
94 | vendor_name, product_name, use_protocol, use_transport, \ | |
95 | init_function, Flags) \ | |
96 | { \ | |
97 | .vendorName = vendor_name, \ | |
98 | .productName = product_name, \ | |
99 | .useProtocol = use_protocol, \ | |
100 | .useTransport = use_transport, \ | |
101 | .initFunction = init_function, \ | |
102 | } | |
103 | ||
104 | static struct us_unusual_dev isd200_unusual_dev_list[] = { | |
105 | # include "unusual_isd200.h" | |
106 | { } /* Terminating entry */ | |
107 | }; | |
108 | ||
109 | #undef UNUSUAL_DEV | |
1da177e4 LT |
110 | |
111 | /* Timeout defines (in Seconds) */ | |
112 | ||
113 | #define ISD200_ENUM_BSY_TIMEOUT 35 | |
114 | #define ISD200_ENUM_DETECT_TIMEOUT 30 | |
115 | #define ISD200_DEFAULT_TIMEOUT 30 | |
116 | ||
117 | /* device flags */ | |
118 | #define DF_ATA_DEVICE 0x0001 | |
119 | #define DF_MEDIA_STATUS_ENABLED 0x0002 | |
120 | #define DF_REMOVABLE_MEDIA 0x0004 | |
121 | ||
122 | /* capability bit definitions */ | |
123 | #define CAPABILITY_DMA 0x01 | |
124 | #define CAPABILITY_LBA 0x02 | |
125 | ||
126 | /* command_setX bit definitions */ | |
127 | #define COMMANDSET_REMOVABLE 0x02 | |
128 | #define COMMANDSET_MEDIA_STATUS 0x10 | |
129 | ||
130 | /* ATA Vendor Specific defines */ | |
131 | #define ATA_ADDRESS_DEVHEAD_STD 0xa0 | |
132 | #define ATA_ADDRESS_DEVHEAD_LBA_MODE 0x40 | |
133 | #define ATA_ADDRESS_DEVHEAD_SLAVE 0x10 | |
134 | ||
135 | /* Action Select bits */ | |
136 | #define ACTION_SELECT_0 0x01 | |
137 | #define ACTION_SELECT_1 0x02 | |
138 | #define ACTION_SELECT_2 0x04 | |
139 | #define ACTION_SELECT_3 0x08 | |
140 | #define ACTION_SELECT_4 0x10 | |
141 | #define ACTION_SELECT_5 0x20 | |
142 | #define ACTION_SELECT_6 0x40 | |
143 | #define ACTION_SELECT_7 0x80 | |
144 | ||
145 | /* Register Select bits */ | |
146 | #define REG_ALTERNATE_STATUS 0x01 | |
147 | #define REG_DEVICE_CONTROL 0x01 | |
148 | #define REG_ERROR 0x02 | |
149 | #define REG_FEATURES 0x02 | |
150 | #define REG_SECTOR_COUNT 0x04 | |
151 | #define REG_SECTOR_NUMBER 0x08 | |
152 | #define REG_CYLINDER_LOW 0x10 | |
153 | #define REG_CYLINDER_HIGH 0x20 | |
154 | #define REG_DEVICE_HEAD 0x40 | |
155 | #define REG_STATUS 0x80 | |
156 | #define REG_COMMAND 0x80 | |
157 | ||
c74e8095 BZ |
158 | /* ATA registers offset definitions */ |
159 | #define ATA_REG_ERROR_OFFSET 1 | |
160 | #define ATA_REG_LCYL_OFFSET 4 | |
161 | #define ATA_REG_HCYL_OFFSET 5 | |
162 | #define ATA_REG_STATUS_OFFSET 7 | |
163 | ||
1da177e4 LT |
164 | /* ATA error definitions not in <linux/hdreg.h> */ |
165 | #define ATA_ERROR_MEDIA_CHANGE 0x20 | |
166 | ||
167 | /* ATA command definitions not in <linux/hdreg.h> */ | |
168 | #define ATA_COMMAND_GET_MEDIA_STATUS 0xDA | |
169 | #define ATA_COMMAND_MEDIA_EJECT 0xED | |
170 | ||
171 | /* ATA drive control definitions */ | |
172 | #define ATA_DC_DISABLE_INTERRUPTS 0x02 | |
173 | #define ATA_DC_RESET_CONTROLLER 0x04 | |
174 | #define ATA_DC_REENABLE_CONTROLLER 0x00 | |
175 | ||
176 | /* | |
177 | * General purpose return codes | |
178 | */ | |
179 | ||
180 | #define ISD200_ERROR -1 | |
181 | #define ISD200_GOOD 0 | |
182 | ||
183 | /* | |
184 | * Transport return codes | |
185 | */ | |
186 | ||
187 | #define ISD200_TRANSPORT_GOOD 0 /* Transport good, command good */ | |
188 | #define ISD200_TRANSPORT_FAILED 1 /* Transport good, command failed */ | |
189 | #define ISD200_TRANSPORT_ERROR 2 /* Transport bad (i.e. device dead) */ | |
190 | ||
191 | /* driver action codes */ | |
192 | #define ACTION_READ_STATUS 0 | |
193 | #define ACTION_RESET 1 | |
194 | #define ACTION_REENABLE 2 | |
195 | #define ACTION_SOFT_RESET 3 | |
196 | #define ACTION_ENUM 4 | |
197 | #define ACTION_IDENTIFY 5 | |
198 | ||
199 | ||
200 | /* | |
201 | * ata_cdb struct | |
202 | */ | |
203 | ||
204 | ||
205 | union ata_cdb { | |
206 | struct { | |
207 | unsigned char SignatureByte0; | |
208 | unsigned char SignatureByte1; | |
209 | unsigned char ActionSelect; | |
210 | unsigned char RegisterSelect; | |
211 | unsigned char TransferBlockSize; | |
212 | unsigned char WriteData3F6; | |
213 | unsigned char WriteData1F1; | |
214 | unsigned char WriteData1F2; | |
215 | unsigned char WriteData1F3; | |
216 | unsigned char WriteData1F4; | |
217 | unsigned char WriteData1F5; | |
218 | unsigned char WriteData1F6; | |
219 | unsigned char WriteData1F7; | |
220 | unsigned char Reserved[3]; | |
221 | } generic; | |
222 | ||
223 | struct { | |
224 | unsigned char SignatureByte0; | |
225 | unsigned char SignatureByte1; | |
226 | unsigned char ActionSelect; | |
227 | unsigned char RegisterSelect; | |
228 | unsigned char TransferBlockSize; | |
229 | unsigned char AlternateStatusByte; | |
230 | unsigned char ErrorByte; | |
231 | unsigned char SectorCountByte; | |
232 | unsigned char SectorNumberByte; | |
233 | unsigned char CylinderLowByte; | |
234 | unsigned char CylinderHighByte; | |
235 | unsigned char DeviceHeadByte; | |
236 | unsigned char StatusByte; | |
237 | unsigned char Reserved[3]; | |
238 | } read; | |
239 | ||
240 | struct { | |
241 | unsigned char SignatureByte0; | |
242 | unsigned char SignatureByte1; | |
243 | unsigned char ActionSelect; | |
244 | unsigned char RegisterSelect; | |
245 | unsigned char TransferBlockSize; | |
246 | unsigned char DeviceControlByte; | |
247 | unsigned char FeaturesByte; | |
248 | unsigned char SectorCountByte; | |
249 | unsigned char SectorNumberByte; | |
250 | unsigned char CylinderLowByte; | |
251 | unsigned char CylinderHighByte; | |
252 | unsigned char DeviceHeadByte; | |
253 | unsigned char CommandByte; | |
254 | unsigned char Reserved[3]; | |
255 | } write; | |
256 | }; | |
257 | ||
258 | ||
259 | /* | |
260 | * Inquiry data structure. This is the data returned from the target | |
261 | * after it receives an inquiry. | |
262 | * | |
263 | * This structure may be extended by the number of bytes specified | |
264 | * in the field AdditionalLength. The defined size constant only | |
265 | * includes fields through ProductRevisionLevel. | |
266 | */ | |
267 | ||
268 | /* | |
269 | * DeviceType field | |
270 | */ | |
271 | #define DIRECT_ACCESS_DEVICE 0x00 /* disks */ | |
272 | #define DEVICE_REMOVABLE 0x80 | |
273 | ||
274 | struct inquiry_data { | |
275 | unsigned char DeviceType; | |
276 | unsigned char DeviceTypeModifier; | |
277 | unsigned char Versions; | |
278 | unsigned char Format; | |
279 | unsigned char AdditionalLength; | |
280 | unsigned char Reserved[2]; | |
281 | unsigned char Capability; | |
282 | unsigned char VendorId[8]; | |
283 | unsigned char ProductId[16]; | |
284 | unsigned char ProductRevisionLevel[4]; | |
285 | unsigned char VendorSpecific[20]; | |
286 | unsigned char Reserved3[40]; | |
287 | } __attribute__ ((packed)); | |
288 | ||
289 | /* | |
290 | * INQUIRY data buffer size | |
291 | */ | |
292 | ||
293 | #define INQUIRYDATABUFFERSIZE 36 | |
294 | ||
295 | ||
296 | /* | |
297 | * ISD200 CONFIG data struct | |
298 | */ | |
299 | ||
300 | #define ATACFG_TIMING 0x0f | |
301 | #define ATACFG_ATAPI_RESET 0x10 | |
302 | #define ATACFG_MASTER 0x20 | |
303 | #define ATACFG_BLOCKSIZE 0xa0 | |
304 | ||
305 | #define ATACFGE_LAST_LUN 0x07 | |
306 | #define ATACFGE_DESC_OVERRIDE 0x08 | |
307 | #define ATACFGE_STATE_SUSPEND 0x10 | |
308 | #define ATACFGE_SKIP_BOOT 0x20 | |
309 | #define ATACFGE_CONF_DESC2 0x40 | |
310 | #define ATACFGE_INIT_STATUS 0x80 | |
311 | ||
312 | #define CFG_CAPABILITY_SRST 0x01 | |
313 | ||
314 | struct isd200_config { | |
315 | unsigned char EventNotification; | |
316 | unsigned char ExternalClock; | |
317 | unsigned char ATAInitTimeout; | |
318 | unsigned char ATAConfig; | |
319 | unsigned char ATAMajorCommand; | |
320 | unsigned char ATAMinorCommand; | |
321 | unsigned char ATAExtraConfig; | |
322 | unsigned char Capability; | |
323 | }__attribute__ ((packed)); | |
324 | ||
325 | ||
326 | /* | |
327 | * ISD200 driver information struct | |
328 | */ | |
329 | ||
330 | struct isd200_info { | |
331 | struct inquiry_data InquiryData; | |
d8881cda | 332 | u16 *id; |
1da177e4 LT |
333 | struct isd200_config ConfigData; |
334 | unsigned char *RegsBuf; | |
335 | unsigned char ATARegs[8]; | |
336 | unsigned char DeviceHead; | |
337 | unsigned char DeviceFlags; | |
338 | ||
339 | /* maximum number of LUNs supported */ | |
340 | unsigned char MaxLUNs; | |
64a87b24 | 341 | unsigned char cmnd[BLK_MAX_CDB]; |
1da177e4 | 342 | struct scsi_cmnd srb; |
48c23d3e | 343 | struct scatterlist sg; |
1da177e4 LT |
344 | }; |
345 | ||
346 | ||
347 | /* | |
348 | * Read Capacity Data - returned in Big Endian format | |
349 | */ | |
350 | ||
351 | struct read_capacity_data { | |
352 | __be32 LogicalBlockAddress; | |
353 | __be32 BytesPerBlock; | |
354 | }; | |
355 | ||
356 | /* | |
357 | * Read Block Limits Data - returned in Big Endian format | |
358 | * This structure returns the maximum and minimum block | |
359 | * size for a TAPE device. | |
360 | */ | |
361 | ||
362 | struct read_block_limits { | |
363 | unsigned char Reserved; | |
364 | unsigned char BlockMaximumSize[3]; | |
365 | unsigned char BlockMinimumSize[2]; | |
366 | }; | |
367 | ||
368 | ||
369 | /* | |
370 | * Sense Data Format | |
371 | */ | |
372 | ||
373 | #define SENSE_ERRCODE 0x7f | |
374 | #define SENSE_ERRCODE_VALID 0x80 | |
375 | #define SENSE_FLAG_SENSE_KEY 0x0f | |
376 | #define SENSE_FLAG_BAD_LENGTH 0x20 | |
377 | #define SENSE_FLAG_END_OF_MEDIA 0x40 | |
378 | #define SENSE_FLAG_FILE_MARK 0x80 | |
379 | struct sense_data { | |
380 | unsigned char ErrorCode; | |
381 | unsigned char SegmentNumber; | |
382 | unsigned char Flags; | |
383 | unsigned char Information[4]; | |
384 | unsigned char AdditionalSenseLength; | |
385 | unsigned char CommandSpecificInformation[4]; | |
386 | unsigned char AdditionalSenseCode; | |
387 | unsigned char AdditionalSenseCodeQualifier; | |
388 | unsigned char FieldReplaceableUnitCode; | |
389 | unsigned char SenseKeySpecific[3]; | |
390 | } __attribute__ ((packed)); | |
391 | ||
392 | /* | |
393 | * Default request sense buffer size | |
394 | */ | |
395 | ||
396 | #define SENSE_BUFFER_SIZE 18 | |
397 | ||
398 | /*********************************************************************** | |
399 | * Helper routines | |
400 | ***********************************************************************/ | |
401 | ||
402 | /************************************************************************** | |
403 | * isd200_build_sense | |
404 | * | |
405 | * Builds an artificial sense buffer to report the results of a | |
406 | * failed command. | |
407 | * | |
408 | * RETURNS: | |
409 | * void | |
410 | */ | |
411 | static void isd200_build_sense(struct us_data *us, struct scsi_cmnd *srb) | |
412 | { | |
413 | struct isd200_info *info = (struct isd200_info *)us->extra; | |
414 | struct sense_data *buf = (struct sense_data *) &srb->sense_buffer[0]; | |
c74e8095 | 415 | unsigned char error = info->ATARegs[ATA_REG_ERROR_OFFSET]; |
1da177e4 LT |
416 | |
417 | if(error & ATA_ERROR_MEDIA_CHANGE) { | |
418 | buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; | |
419 | buf->AdditionalSenseLength = 0xb; | |
420 | buf->Flags = UNIT_ATTENTION; | |
421 | buf->AdditionalSenseCode = 0; | |
422 | buf->AdditionalSenseCodeQualifier = 0; | |
fcd3ec69 | 423 | } else if (error & ATA_MCR) { |
1da177e4 LT |
424 | buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; |
425 | buf->AdditionalSenseLength = 0xb; | |
426 | buf->Flags = UNIT_ATTENTION; | |
427 | buf->AdditionalSenseCode = 0; | |
428 | buf->AdditionalSenseCodeQualifier = 0; | |
fcd3ec69 | 429 | } else if (error & ATA_TRK0NF) { |
1da177e4 LT |
430 | buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; |
431 | buf->AdditionalSenseLength = 0xb; | |
432 | buf->Flags = NOT_READY; | |
433 | buf->AdditionalSenseCode = 0; | |
434 | buf->AdditionalSenseCodeQualifier = 0; | |
fcd3ec69 | 435 | } else if (error & ATA_UNC) { |
1da177e4 LT |
436 | buf->ErrorCode = 0x70 | SENSE_ERRCODE_VALID; |
437 | buf->AdditionalSenseLength = 0xb; | |
438 | buf->Flags = DATA_PROTECT; | |
439 | buf->AdditionalSenseCode = 0; | |
440 | buf->AdditionalSenseCodeQualifier = 0; | |
441 | } else { | |
442 | buf->ErrorCode = 0; | |
443 | buf->AdditionalSenseLength = 0; | |
444 | buf->Flags = 0; | |
445 | buf->AdditionalSenseCode = 0; | |
446 | buf->AdditionalSenseCodeQualifier = 0; | |
447 | } | |
448 | } | |
449 | ||
450 | ||
451 | /*********************************************************************** | |
452 | * Transport routines | |
453 | ***********************************************************************/ | |
454 | ||
48c23d3e BH |
455 | /************************************************************************** |
456 | * isd200_set_srb(), isd200_srb_set_bufflen() | |
457 | * | |
458 | * Two helpers to facilitate in initialization of scsi_cmnd structure | |
459 | * Will need to change when struct scsi_cmnd changes | |
460 | */ | |
461 | static void isd200_set_srb(struct isd200_info *info, | |
462 | enum dma_data_direction dir, void* buff, unsigned bufflen) | |
463 | { | |
464 | struct scsi_cmnd *srb = &info->srb; | |
465 | ||
466 | if (buff) | |
467 | sg_init_one(&info->sg, buff, bufflen); | |
468 | ||
469 | srb->sc_data_direction = dir; | |
30b0c37b BH |
470 | srb->sdb.table.sgl = buff ? &info->sg : NULL; |
471 | srb->sdb.length = bufflen; | |
472 | srb->sdb.table.nents = buff ? 1 : 0; | |
48c23d3e BH |
473 | } |
474 | ||
475 | static void isd200_srb_set_bufflen(struct scsi_cmnd *srb, unsigned bufflen) | |
476 | { | |
30b0c37b | 477 | srb->sdb.length = bufflen; |
48c23d3e BH |
478 | } |
479 | ||
1da177e4 LT |
480 | |
481 | /************************************************************************** | |
482 | * isd200_action | |
483 | * | |
484 | * Routine for sending commands to the isd200 | |
485 | * | |
486 | * RETURNS: | |
487 | * ISD status code | |
488 | */ | |
489 | static int isd200_action( struct us_data *us, int action, | |
490 | void* pointer, int value ) | |
491 | { | |
492 | union ata_cdb ata; | |
0df4d8ef IM |
493 | /* static to prevent this large struct being placed on the valuable stack */ |
494 | static struct scsi_device srb_dev; | |
1da177e4 LT |
495 | struct isd200_info *info = (struct isd200_info *)us->extra; |
496 | struct scsi_cmnd *srb = &info->srb; | |
497 | int status; | |
498 | ||
499 | memset(&ata, 0, sizeof(ata)); | |
64a87b24 | 500 | srb->cmnd = info->cmnd; |
1da177e4 | 501 | srb->device = &srb_dev; |
1da177e4 LT |
502 | |
503 | ata.generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; | |
504 | ata.generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; | |
505 | ata.generic.TransferBlockSize = 1; | |
506 | ||
507 | switch ( action ) { | |
508 | case ACTION_READ_STATUS: | |
191648d0 | 509 | usb_stor_dbg(us, " isd200_action(READ_STATUS)\n"); |
1da177e4 LT |
510 | ata.generic.ActionSelect = ACTION_SELECT_0|ACTION_SELECT_2; |
511 | ata.generic.RegisterSelect = | |
512 | REG_CYLINDER_LOW | REG_CYLINDER_HIGH | | |
513 | REG_STATUS | REG_ERROR; | |
48c23d3e | 514 | isd200_set_srb(info, DMA_FROM_DEVICE, pointer, value); |
1da177e4 LT |
515 | break; |
516 | ||
517 | case ACTION_ENUM: | |
191648d0 | 518 | usb_stor_dbg(us, " isd200_action(ENUM,0x%02x)\n", value); |
1da177e4 LT |
519 | ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| |
520 | ACTION_SELECT_3|ACTION_SELECT_4| | |
521 | ACTION_SELECT_5; | |
522 | ata.generic.RegisterSelect = REG_DEVICE_HEAD; | |
523 | ata.write.DeviceHeadByte = value; | |
48c23d3e | 524 | isd200_set_srb(info, DMA_NONE, NULL, 0); |
1da177e4 LT |
525 | break; |
526 | ||
527 | case ACTION_RESET: | |
191648d0 | 528 | usb_stor_dbg(us, " isd200_action(RESET)\n"); |
1da177e4 LT |
529 | ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| |
530 | ACTION_SELECT_3|ACTION_SELECT_4; | |
531 | ata.generic.RegisterSelect = REG_DEVICE_CONTROL; | |
532 | ata.write.DeviceControlByte = ATA_DC_RESET_CONTROLLER; | |
48c23d3e | 533 | isd200_set_srb(info, DMA_NONE, NULL, 0); |
1da177e4 LT |
534 | break; |
535 | ||
536 | case ACTION_REENABLE: | |
191648d0 | 537 | usb_stor_dbg(us, " isd200_action(REENABLE)\n"); |
1da177e4 LT |
538 | ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_2| |
539 | ACTION_SELECT_3|ACTION_SELECT_4; | |
540 | ata.generic.RegisterSelect = REG_DEVICE_CONTROL; | |
541 | ata.write.DeviceControlByte = ATA_DC_REENABLE_CONTROLLER; | |
48c23d3e | 542 | isd200_set_srb(info, DMA_NONE, NULL, 0); |
1da177e4 LT |
543 | break; |
544 | ||
545 | case ACTION_SOFT_RESET: | |
191648d0 | 546 | usb_stor_dbg(us, " isd200_action(SOFT_RESET)\n"); |
1da177e4 LT |
547 | ata.generic.ActionSelect = ACTION_SELECT_1|ACTION_SELECT_5; |
548 | ata.generic.RegisterSelect = REG_DEVICE_HEAD | REG_COMMAND; | |
549 | ata.write.DeviceHeadByte = info->DeviceHead; | |
f08f31f7 | 550 | ata.write.CommandByte = ATA_CMD_DEV_RESET; |
48c23d3e | 551 | isd200_set_srb(info, DMA_NONE, NULL, 0); |
1da177e4 LT |
552 | break; |
553 | ||
554 | case ACTION_IDENTIFY: | |
191648d0 | 555 | usb_stor_dbg(us, " isd200_action(IDENTIFY)\n"); |
1da177e4 | 556 | ata.generic.RegisterSelect = REG_COMMAND; |
f08f31f7 | 557 | ata.write.CommandByte = ATA_CMD_ID_ATA; |
48c23d3e | 558 | isd200_set_srb(info, DMA_FROM_DEVICE, info->id, |
d8881cda | 559 | ATA_ID_WORDS * 2); |
1da177e4 LT |
560 | break; |
561 | ||
562 | default: | |
191648d0 | 563 | usb_stor_dbg(us, "Error: Undefined action %d\n", action); |
48c23d3e | 564 | return ISD200_ERROR; |
1da177e4 LT |
565 | } |
566 | ||
567 | memcpy(srb->cmnd, &ata, sizeof(ata.generic)); | |
568 | srb->cmd_len = sizeof(ata.generic); | |
569 | status = usb_stor_Bulk_transport(srb, us); | |
570 | if (status == USB_STOR_TRANSPORT_GOOD) | |
571 | status = ISD200_GOOD; | |
572 | else { | |
191648d0 JP |
573 | usb_stor_dbg(us, " isd200_action(0x%02x) error: %d\n", |
574 | action, status); | |
1da177e4 LT |
575 | status = ISD200_ERROR; |
576 | /* need to reset device here */ | |
577 | } | |
578 | ||
579 | return status; | |
580 | } | |
581 | ||
582 | /************************************************************************** | |
583 | * isd200_read_regs | |
584 | * | |
585 | * Read ATA Registers | |
586 | * | |
587 | * RETURNS: | |
588 | * ISD status code | |
589 | */ | |
590 | static int isd200_read_regs( struct us_data *us ) | |
591 | { | |
592 | struct isd200_info *info = (struct isd200_info *)us->extra; | |
593 | int retStatus = ISD200_GOOD; | |
594 | int transferStatus; | |
595 | ||
191648d0 | 596 | usb_stor_dbg(us, "Entering isd200_IssueATAReadRegs\n"); |
1da177e4 LT |
597 | |
598 | transferStatus = isd200_action( us, ACTION_READ_STATUS, | |
599 | info->RegsBuf, sizeof(info->ATARegs) ); | |
600 | if (transferStatus != ISD200_TRANSPORT_GOOD) { | |
191648d0 | 601 | usb_stor_dbg(us, " Error reading ATA registers\n"); |
1da177e4 LT |
602 | retStatus = ISD200_ERROR; |
603 | } else { | |
604 | memcpy(info->ATARegs, info->RegsBuf, sizeof(info->ATARegs)); | |
191648d0 JP |
605 | usb_stor_dbg(us, " Got ATA Register[ATA_REG_ERROR_OFFSET] = 0x%x\n", |
606 | info->ATARegs[ATA_REG_ERROR_OFFSET]); | |
1da177e4 LT |
607 | } |
608 | ||
609 | return retStatus; | |
610 | } | |
611 | ||
612 | ||
613 | /************************************************************************** | |
614 | * Invoke the transport and basic error-handling/recovery methods | |
615 | * | |
616 | * This is used by the protocol layers to actually send the message to | |
617 | * the device and receive the response. | |
618 | */ | |
619 | static void isd200_invoke_transport( struct us_data *us, | |
620 | struct scsi_cmnd *srb, | |
621 | union ata_cdb *ataCdb ) | |
622 | { | |
623 | int need_auto_sense = 0; | |
624 | int transferStatus; | |
625 | int result; | |
626 | ||
627 | /* send the command to the transport layer */ | |
628 | memcpy(srb->cmnd, ataCdb, sizeof(ataCdb->generic)); | |
629 | srb->cmd_len = sizeof(ataCdb->generic); | |
630 | transferStatus = usb_stor_Bulk_transport(srb, us); | |
631 | ||
f0183a33 FB |
632 | /* |
633 | * if the command gets aborted by the higher layers, we need to | |
1da177e4 LT |
634 | * short-circuit all other processing |
635 | */ | |
7e4d6c38 | 636 | if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { |
191648d0 | 637 | usb_stor_dbg(us, "-- command was aborted\n"); |
1da177e4 LT |
638 | goto Handle_Abort; |
639 | } | |
640 | ||
641 | switch (transferStatus) { | |
642 | ||
643 | case USB_STOR_TRANSPORT_GOOD: | |
644 | /* Indicate a good result */ | |
645 | srb->result = SAM_STAT_GOOD; | |
646 | break; | |
647 | ||
648 | case USB_STOR_TRANSPORT_NO_SENSE: | |
191648d0 | 649 | usb_stor_dbg(us, "-- transport indicates protocol failure\n"); |
1da177e4 LT |
650 | srb->result = SAM_STAT_CHECK_CONDITION; |
651 | return; | |
652 | ||
653 | case USB_STOR_TRANSPORT_FAILED: | |
191648d0 | 654 | usb_stor_dbg(us, "-- transport indicates command failure\n"); |
1da177e4 LT |
655 | need_auto_sense = 1; |
656 | break; | |
657 | ||
658 | case USB_STOR_TRANSPORT_ERROR: | |
191648d0 | 659 | usb_stor_dbg(us, "-- transport indicates transport error\n"); |
1da177e4 LT |
660 | srb->result = DID_ERROR << 16; |
661 | /* Need reset here */ | |
662 | return; | |
663 | ||
664 | default: | |
191648d0 | 665 | usb_stor_dbg(us, "-- transport indicates unknown error\n"); |
1da177e4 LT |
666 | srb->result = DID_ERROR << 16; |
667 | /* Need reset here */ | |
668 | return; | |
669 | } | |
670 | ||
48c23d3e | 671 | if ((scsi_get_resid(srb) > 0) && |
1da177e4 LT |
672 | !((srb->cmnd[0] == REQUEST_SENSE) || |
673 | (srb->cmnd[0] == INQUIRY) || | |
674 | (srb->cmnd[0] == MODE_SENSE) || | |
675 | (srb->cmnd[0] == LOG_SENSE) || | |
676 | (srb->cmnd[0] == MODE_SENSE_10))) { | |
191648d0 | 677 | usb_stor_dbg(us, "-- unexpectedly short transfer\n"); |
1da177e4 LT |
678 | need_auto_sense = 1; |
679 | } | |
680 | ||
681 | if (need_auto_sense) { | |
682 | result = isd200_read_regs(us); | |
7e4d6c38 | 683 | if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { |
191648d0 | 684 | usb_stor_dbg(us, "-- auto-sense aborted\n"); |
1da177e4 LT |
685 | goto Handle_Abort; |
686 | } | |
687 | if (result == ISD200_GOOD) { | |
688 | isd200_build_sense(us, srb); | |
689 | srb->result = SAM_STAT_CHECK_CONDITION; | |
690 | ||
691 | /* If things are really okay, then let's show that */ | |
692 | if ((srb->sense_buffer[2] & 0xf) == 0x0) | |
693 | srb->result = SAM_STAT_GOOD; | |
694 | } else { | |
695 | srb->result = DID_ERROR << 16; | |
696 | /* Need reset here */ | |
697 | } | |
698 | } | |
699 | ||
f0183a33 FB |
700 | /* |
701 | * Regardless of auto-sense, if we _know_ we have an error | |
1da177e4 LT |
702 | * condition, show that in the result code |
703 | */ | |
704 | if (transferStatus == USB_STOR_TRANSPORT_FAILED) | |
705 | srb->result = SAM_STAT_CHECK_CONDITION; | |
706 | return; | |
707 | ||
f0183a33 FB |
708 | /* |
709 | * abort processing: the bulk-only transport requires a reset | |
710 | * following an abort | |
711 | */ | |
1da177e4 LT |
712 | Handle_Abort: |
713 | srb->result = DID_ABORT << 16; | |
714 | ||
715 | /* permit the reset transfer to take place */ | |
7e4d6c38 | 716 | clear_bit(US_FLIDX_ABORTING, &us->dflags); |
1da177e4 LT |
717 | /* Need reset here */ |
718 | } | |
719 | ||
720 | #ifdef CONFIG_USB_STORAGE_DEBUG | |
191648d0 | 721 | static void isd200_log_config(struct us_data *us, struct isd200_info *info) |
1da177e4 | 722 | { |
191648d0 JP |
723 | usb_stor_dbg(us, " Event Notification: 0x%x\n", |
724 | info->ConfigData.EventNotification); | |
725 | usb_stor_dbg(us, " External Clock: 0x%x\n", | |
726 | info->ConfigData.ExternalClock); | |
727 | usb_stor_dbg(us, " ATA Init Timeout: 0x%x\n", | |
728 | info->ConfigData.ATAInitTimeout); | |
729 | usb_stor_dbg(us, " ATAPI Command Block Size: 0x%x\n", | |
730 | (info->ConfigData.ATAConfig & ATACFG_BLOCKSIZE) >> 6); | |
731 | usb_stor_dbg(us, " Master/Slave Selection: 0x%x\n", | |
732 | info->ConfigData.ATAConfig & ATACFG_MASTER); | |
733 | usb_stor_dbg(us, " ATAPI Reset: 0x%x\n", | |
734 | info->ConfigData.ATAConfig & ATACFG_ATAPI_RESET); | |
735 | usb_stor_dbg(us, " ATA Timing: 0x%x\n", | |
736 | info->ConfigData.ATAConfig & ATACFG_TIMING); | |
737 | usb_stor_dbg(us, " ATA Major Command: 0x%x\n", | |
738 | info->ConfigData.ATAMajorCommand); | |
739 | usb_stor_dbg(us, " ATA Minor Command: 0x%x\n", | |
740 | info->ConfigData.ATAMinorCommand); | |
741 | usb_stor_dbg(us, " Init Status: 0x%x\n", | |
742 | info->ConfigData.ATAExtraConfig & ATACFGE_INIT_STATUS); | |
743 | usb_stor_dbg(us, " Config Descriptor 2: 0x%x\n", | |
744 | info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2); | |
745 | usb_stor_dbg(us, " Skip Device Boot: 0x%x\n", | |
746 | info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT); | |
333c65bc | 747 | usb_stor_dbg(us, " ATA 3 State Suspend: 0x%x\n", |
191648d0 JP |
748 | info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND); |
749 | usb_stor_dbg(us, " Descriptor Override: 0x%x\n", | |
750 | info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE); | |
751 | usb_stor_dbg(us, " Last LUN Identifier: 0x%x\n", | |
752 | info->ConfigData.ATAExtraConfig & ATACFGE_LAST_LUN); | |
753 | usb_stor_dbg(us, " SRST Enable: 0x%x\n", | |
754 | info->ConfigData.ATAExtraConfig & CFG_CAPABILITY_SRST); | |
1da177e4 LT |
755 | } |
756 | #endif | |
757 | ||
758 | /************************************************************************** | |
759 | * isd200_write_config | |
760 | * | |
761 | * Write the ISD200 Configuration data | |
762 | * | |
763 | * RETURNS: | |
764 | * ISD status code | |
765 | */ | |
766 | static int isd200_write_config( struct us_data *us ) | |
767 | { | |
768 | struct isd200_info *info = (struct isd200_info *)us->extra; | |
769 | int retStatus = ISD200_GOOD; | |
770 | int result; | |
771 | ||
772 | #ifdef CONFIG_USB_STORAGE_DEBUG | |
191648d0 JP |
773 | usb_stor_dbg(us, "Entering isd200_write_config\n"); |
774 | usb_stor_dbg(us, " Writing the following ISD200 Config Data:\n"); | |
775 | isd200_log_config(us, info); | |
1da177e4 LT |
776 | #endif |
777 | ||
778 | /* let's send the command via the control pipe */ | |
779 | result = usb_stor_ctrl_transfer( | |
780 | us, | |
781 | us->send_ctrl_pipe, | |
782 | 0x01, | |
783 | USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, | |
784 | 0x0000, | |
785 | 0x0002, | |
786 | (void *) &info->ConfigData, | |
787 | sizeof(info->ConfigData)); | |
788 | ||
789 | if (result >= 0) { | |
191648d0 | 790 | usb_stor_dbg(us, " ISD200 Config Data was written successfully\n"); |
1da177e4 | 791 | } else { |
191648d0 | 792 | usb_stor_dbg(us, " Request to write ISD200 Config Data failed!\n"); |
1da177e4 LT |
793 | retStatus = ISD200_ERROR; |
794 | } | |
795 | ||
191648d0 | 796 | usb_stor_dbg(us, "Leaving isd200_write_config %08X\n", retStatus); |
1da177e4 LT |
797 | return retStatus; |
798 | } | |
799 | ||
800 | ||
801 | /************************************************************************** | |
802 | * isd200_read_config | |
803 | * | |
804 | * Reads the ISD200 Configuration data | |
805 | * | |
806 | * RETURNS: | |
807 | * ISD status code | |
808 | */ | |
809 | static int isd200_read_config( struct us_data *us ) | |
810 | { | |
811 | struct isd200_info *info = (struct isd200_info *)us->extra; | |
812 | int retStatus = ISD200_GOOD; | |
813 | int result; | |
814 | ||
191648d0 | 815 | usb_stor_dbg(us, "Entering isd200_read_config\n"); |
1da177e4 LT |
816 | |
817 | /* read the configuration information from ISD200. Use this to */ | |
818 | /* determine what the special ATA CDB bytes are. */ | |
819 | ||
820 | result = usb_stor_ctrl_transfer( | |
821 | us, | |
822 | us->recv_ctrl_pipe, | |
823 | 0x02, | |
824 | USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, | |
825 | 0x0000, | |
826 | 0x0002, | |
827 | (void *) &info->ConfigData, | |
828 | sizeof(info->ConfigData)); | |
829 | ||
830 | ||
831 | if (result >= 0) { | |
191648d0 | 832 | usb_stor_dbg(us, " Retrieved the following ISD200 Config Data:\n"); |
1da177e4 | 833 | #ifdef CONFIG_USB_STORAGE_DEBUG |
191648d0 | 834 | isd200_log_config(us, info); |
1da177e4 LT |
835 | #endif |
836 | } else { | |
191648d0 | 837 | usb_stor_dbg(us, " Request to get ISD200 Config Data failed!\n"); |
1da177e4 LT |
838 | retStatus = ISD200_ERROR; |
839 | } | |
840 | ||
191648d0 | 841 | usb_stor_dbg(us, "Leaving isd200_read_config %08X\n", retStatus); |
1da177e4 LT |
842 | return retStatus; |
843 | } | |
844 | ||
845 | ||
846 | /************************************************************************** | |
847 | * isd200_atapi_soft_reset | |
848 | * | |
849 | * Perform an Atapi Soft Reset on the device | |
850 | * | |
851 | * RETURNS: | |
852 | * NT status code | |
853 | */ | |
854 | static int isd200_atapi_soft_reset( struct us_data *us ) | |
855 | { | |
856 | int retStatus = ISD200_GOOD; | |
857 | int transferStatus; | |
858 | ||
191648d0 | 859 | usb_stor_dbg(us, "Entering isd200_atapi_soft_reset\n"); |
1da177e4 LT |
860 | |
861 | transferStatus = isd200_action( us, ACTION_SOFT_RESET, NULL, 0 ); | |
862 | if (transferStatus != ISD200_TRANSPORT_GOOD) { | |
191648d0 | 863 | usb_stor_dbg(us, " Error issuing Atapi Soft Reset\n"); |
1da177e4 LT |
864 | retStatus = ISD200_ERROR; |
865 | } | |
866 | ||
191648d0 | 867 | usb_stor_dbg(us, "Leaving isd200_atapi_soft_reset %08X\n", retStatus); |
1da177e4 LT |
868 | return retStatus; |
869 | } | |
870 | ||
871 | ||
872 | /************************************************************************** | |
873 | * isd200_srst | |
874 | * | |
875 | * Perform an SRST on the device | |
876 | * | |
877 | * RETURNS: | |
878 | * ISD status code | |
879 | */ | |
880 | static int isd200_srst( struct us_data *us ) | |
881 | { | |
882 | int retStatus = ISD200_GOOD; | |
883 | int transferStatus; | |
884 | ||
191648d0 | 885 | usb_stor_dbg(us, "Entering isd200_SRST\n"); |
1da177e4 LT |
886 | |
887 | transferStatus = isd200_action( us, ACTION_RESET, NULL, 0 ); | |
888 | ||
889 | /* check to see if this request failed */ | |
890 | if (transferStatus != ISD200_TRANSPORT_GOOD) { | |
191648d0 | 891 | usb_stor_dbg(us, " Error issuing SRST\n"); |
1da177e4 LT |
892 | retStatus = ISD200_ERROR; |
893 | } else { | |
894 | /* delay 10ms to give the drive a chance to see it */ | |
895 | msleep(10); | |
896 | ||
897 | transferStatus = isd200_action( us, ACTION_REENABLE, NULL, 0 ); | |
898 | if (transferStatus != ISD200_TRANSPORT_GOOD) { | |
191648d0 | 899 | usb_stor_dbg(us, " Error taking drive out of reset\n"); |
1da177e4 LT |
900 | retStatus = ISD200_ERROR; |
901 | } else { | |
902 | /* delay 50ms to give the drive a chance to recover after SRST */ | |
903 | msleep(50); | |
904 | } | |
905 | } | |
906 | ||
191648d0 | 907 | usb_stor_dbg(us, "Leaving isd200_srst %08X\n", retStatus); |
1da177e4 LT |
908 | return retStatus; |
909 | } | |
910 | ||
911 | ||
912 | /************************************************************************** | |
913 | * isd200_try_enum | |
914 | * | |
915 | * Helper function for isd200_manual_enum(). Does ENUM and READ_STATUS | |
916 | * and tries to analyze the status registers | |
917 | * | |
918 | * RETURNS: | |
919 | * ISD status code | |
920 | */ | |
921 | static int isd200_try_enum(struct us_data *us, unsigned char master_slave, | |
922 | int detect ) | |
923 | { | |
924 | int status = ISD200_GOOD; | |
925 | unsigned long endTime; | |
926 | struct isd200_info *info = (struct isd200_info *)us->extra; | |
927 | unsigned char *regs = info->RegsBuf; | |
928 | int recheckAsMaster = 0; | |
929 | ||
930 | if ( detect ) | |
931 | endTime = jiffies + ISD200_ENUM_DETECT_TIMEOUT * HZ; | |
932 | else | |
933 | endTime = jiffies + ISD200_ENUM_BSY_TIMEOUT * HZ; | |
934 | ||
935 | /* loop until we detect !BSY or timeout */ | |
936 | while(1) { | |
1da177e4 LT |
937 | |
938 | status = isd200_action( us, ACTION_ENUM, NULL, master_slave ); | |
939 | if ( status != ISD200_GOOD ) | |
940 | break; | |
941 | ||
942 | status = isd200_action( us, ACTION_READ_STATUS, | |
943 | regs, 8 ); | |
944 | if ( status != ISD200_GOOD ) | |
945 | break; | |
946 | ||
947 | if (!detect) { | |
fcd3ec69 | 948 | if (regs[ATA_REG_STATUS_OFFSET] & ATA_BUSY) { |
191648d0 JP |
949 | usb_stor_dbg(us, " %s status is still BSY, try again...\n", |
950 | master_slave == ATA_ADDRESS_DEVHEAD_STD ? | |
951 | "Master" : "Slave"); | |
1da177e4 | 952 | } else { |
191648d0 JP |
953 | usb_stor_dbg(us, " %s status !BSY, continue with next operation\n", |
954 | master_slave == ATA_ADDRESS_DEVHEAD_STD ? | |
955 | "Master" : "Slave"); | |
1da177e4 LT |
956 | break; |
957 | } | |
958 | } | |
fcd3ec69 BZ |
959 | /* check for ATA_BUSY and */ |
960 | /* ATA_DF (workaround ATA Zip drive) and */ | |
961 | /* ATA_ERR (workaround for Archos CD-ROM) */ | |
c74e8095 | 962 | else if (regs[ATA_REG_STATUS_OFFSET] & |
fcd3ec69 | 963 | (ATA_BUSY | ATA_DF | ATA_ERR)) { |
191648d0 | 964 | usb_stor_dbg(us, " Status indicates it is not ready, try again...\n"); |
1da177e4 LT |
965 | } |
966 | /* check for DRDY, ATA devices set DRDY after SRST */ | |
fcd3ec69 | 967 | else if (regs[ATA_REG_STATUS_OFFSET] & ATA_DRDY) { |
191648d0 | 968 | usb_stor_dbg(us, " Identified ATA device\n"); |
1da177e4 LT |
969 | info->DeviceFlags |= DF_ATA_DEVICE; |
970 | info->DeviceHead = master_slave; | |
971 | break; | |
972 | } | |
f0183a33 FB |
973 | /* |
974 | * check Cylinder High/Low to | |
975 | * determine if it is an ATAPI device | |
976 | */ | |
c74e8095 BZ |
977 | else if (regs[ATA_REG_HCYL_OFFSET] == 0xEB && |
978 | regs[ATA_REG_LCYL_OFFSET] == 0x14) { | |
f0183a33 FB |
979 | /* |
980 | * It seems that the RICOH | |
981 | * MP6200A CD/RW drive will | |
982 | * report itself okay as a | |
983 | * slave when it is really a | |
984 | * master. So this check again | |
985 | * as a master device just to | |
986 | * make sure it doesn't report | |
987 | * itself okay as a master also | |
988 | */ | |
1da177e4 LT |
989 | if ((master_slave & ATA_ADDRESS_DEVHEAD_SLAVE) && |
990 | !recheckAsMaster) { | |
191648d0 | 991 | usb_stor_dbg(us, " Identified ATAPI device as slave. Rechecking again as master\n"); |
1da177e4 LT |
992 | recheckAsMaster = 1; |
993 | master_slave = ATA_ADDRESS_DEVHEAD_STD; | |
994 | } else { | |
191648d0 | 995 | usb_stor_dbg(us, " Identified ATAPI device\n"); |
1da177e4 LT |
996 | info->DeviceHead = master_slave; |
997 | ||
998 | status = isd200_atapi_soft_reset(us); | |
999 | break; | |
1000 | } | |
1001 | } else { | |
191648d0 | 1002 | usb_stor_dbg(us, " Not ATA, not ATAPI - Weird\n"); |
1da177e4 LT |
1003 | break; |
1004 | } | |
1005 | ||
1006 | /* check for timeout on this request */ | |
1007 | if (time_after_eq(jiffies, endTime)) { | |
1008 | if (!detect) | |
191648d0 | 1009 | usb_stor_dbg(us, " BSY check timeout, just continue with next operation...\n"); |
1da177e4 | 1010 | else |
191648d0 | 1011 | usb_stor_dbg(us, " Device detect timeout!\n"); |
1da177e4 LT |
1012 | break; |
1013 | } | |
1014 | } | |
1015 | ||
1016 | return status; | |
1017 | } | |
1018 | ||
1019 | /************************************************************************** | |
1020 | * isd200_manual_enum | |
1021 | * | |
1022 | * Determines if the drive attached is an ATA or ATAPI and if it is a | |
1023 | * master or slave. | |
1024 | * | |
1025 | * RETURNS: | |
1026 | * ISD status code | |
1027 | */ | |
1028 | static int isd200_manual_enum(struct us_data *us) | |
1029 | { | |
1030 | struct isd200_info *info = (struct isd200_info *)us->extra; | |
1031 | int retStatus = ISD200_GOOD; | |
1032 | ||
191648d0 | 1033 | usb_stor_dbg(us, "Entering isd200_manual_enum\n"); |
1da177e4 LT |
1034 | |
1035 | retStatus = isd200_read_config(us); | |
1036 | if (retStatus == ISD200_GOOD) { | |
1037 | int isslave; | |
1038 | /* master or slave? */ | |
1039 | retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_STD, 0); | |
1040 | if (retStatus == ISD200_GOOD) | |
1041 | retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_SLAVE, 0); | |
1042 | ||
1043 | if (retStatus == ISD200_GOOD) { | |
1044 | retStatus = isd200_srst(us); | |
1045 | if (retStatus == ISD200_GOOD) | |
1046 | /* ata or atapi? */ | |
1047 | retStatus = isd200_try_enum( us, ATA_ADDRESS_DEVHEAD_STD, 1); | |
1048 | } | |
1049 | ||
1050 | isslave = (info->DeviceHead & ATA_ADDRESS_DEVHEAD_SLAVE) ? 1 : 0; | |
1051 | if (!(info->ConfigData.ATAConfig & ATACFG_MASTER)) { | |
191648d0 JP |
1052 | usb_stor_dbg(us, " Setting Master/Slave selection to %d\n", |
1053 | isslave); | |
1da177e4 LT |
1054 | info->ConfigData.ATAConfig &= 0x3f; |
1055 | info->ConfigData.ATAConfig |= (isslave<<6); | |
1056 | retStatus = isd200_write_config(us); | |
1057 | } | |
1058 | } | |
1059 | ||
191648d0 | 1060 | usb_stor_dbg(us, "Leaving isd200_manual_enum %08X\n", retStatus); |
1da177e4 LT |
1061 | return(retStatus); |
1062 | } | |
1063 | ||
d8881cda | 1064 | static void isd200_fix_driveid(u16 *id) |
3794ade5 AC |
1065 | { |
1066 | #ifndef __LITTLE_ENDIAN | |
1067 | # ifdef __BIG_ENDIAN | |
1068 | int i; | |
d8881cda BZ |
1069 | |
1070 | for (i = 0; i < ATA_ID_WORDS; i++) | |
1071 | id[i] = __le16_to_cpu(id[i]); | |
3794ade5 AC |
1072 | # else |
1073 | # error "Please fix <asm/byteorder.h>" | |
1074 | # endif | |
1075 | #endif | |
1076 | } | |
1077 | ||
191648d0 | 1078 | static void isd200_dump_driveid(struct us_data *us, u16 *id) |
d8881cda | 1079 | { |
191648d0 JP |
1080 | usb_stor_dbg(us, " Identify Data Structure:\n"); |
1081 | usb_stor_dbg(us, " config = 0x%x\n", id[ATA_ID_CONFIG]); | |
1082 | usb_stor_dbg(us, " cyls = 0x%x\n", id[ATA_ID_CYLS]); | |
1083 | usb_stor_dbg(us, " heads = 0x%x\n", id[ATA_ID_HEADS]); | |
1084 | usb_stor_dbg(us, " track_bytes = 0x%x\n", id[4]); | |
1085 | usb_stor_dbg(us, " sector_bytes = 0x%x\n", id[5]); | |
1086 | usb_stor_dbg(us, " sectors = 0x%x\n", id[ATA_ID_SECTORS]); | |
1087 | usb_stor_dbg(us, " serial_no[0] = 0x%x\n", *(char *)&id[ATA_ID_SERNO]); | |
1088 | usb_stor_dbg(us, " buf_type = 0x%x\n", id[20]); | |
1089 | usb_stor_dbg(us, " buf_size = 0x%x\n", id[ATA_ID_BUF_SIZE]); | |
1090 | usb_stor_dbg(us, " ecc_bytes = 0x%x\n", id[22]); | |
1091 | usb_stor_dbg(us, " fw_rev[0] = 0x%x\n", *(char *)&id[ATA_ID_FW_REV]); | |
1092 | usb_stor_dbg(us, " model[0] = 0x%x\n", *(char *)&id[ATA_ID_PROD]); | |
1093 | usb_stor_dbg(us, " max_multsect = 0x%x\n", id[ATA_ID_MAX_MULTSECT] & 0xff); | |
1094 | usb_stor_dbg(us, " dword_io = 0x%x\n", id[ATA_ID_DWORD_IO]); | |
1095 | usb_stor_dbg(us, " capability = 0x%x\n", id[ATA_ID_CAPABILITY] >> 8); | |
1096 | usb_stor_dbg(us, " tPIO = 0x%x\n", id[ATA_ID_OLD_PIO_MODES] >> 8); | |
1097 | usb_stor_dbg(us, " tDMA = 0x%x\n", id[ATA_ID_OLD_DMA_MODES] >> 8); | |
1098 | usb_stor_dbg(us, " field_valid = 0x%x\n", id[ATA_ID_FIELD_VALID]); | |
1099 | usb_stor_dbg(us, " cur_cyls = 0x%x\n", id[ATA_ID_CUR_CYLS]); | |
1100 | usb_stor_dbg(us, " cur_heads = 0x%x\n", id[ATA_ID_CUR_HEADS]); | |
1101 | usb_stor_dbg(us, " cur_sectors = 0x%x\n", id[ATA_ID_CUR_SECTORS]); | |
1102 | usb_stor_dbg(us, " cur_capacity = 0x%x\n", ata_id_u32(id, 57)); | |
1103 | usb_stor_dbg(us, " multsect = 0x%x\n", id[ATA_ID_MULTSECT] & 0xff); | |
1104 | usb_stor_dbg(us, " lba_capacity = 0x%x\n", ata_id_u32(id, ATA_ID_LBA_CAPACITY)); | |
1105 | usb_stor_dbg(us, " command_set_1 = 0x%x\n", id[ATA_ID_COMMAND_SET_1]); | |
1106 | usb_stor_dbg(us, " command_set_2 = 0x%x\n", id[ATA_ID_COMMAND_SET_2]); | |
d8881cda | 1107 | } |
1da177e4 LT |
1108 | |
1109 | /************************************************************************** | |
1110 | * isd200_get_inquiry_data | |
1111 | * | |
1112 | * Get inquiry data | |
1113 | * | |
1114 | * RETURNS: | |
1115 | * ISD status code | |
1116 | */ | |
1117 | static int isd200_get_inquiry_data( struct us_data *us ) | |
1118 | { | |
1119 | struct isd200_info *info = (struct isd200_info *)us->extra; | |
1120 | int retStatus = ISD200_GOOD; | |
d8881cda | 1121 | u16 *id = info->id; |
1da177e4 | 1122 | |
191648d0 | 1123 | usb_stor_dbg(us, "Entering isd200_get_inquiry_data\n"); |
1da177e4 LT |
1124 | |
1125 | /* set default to Master */ | |
1126 | info->DeviceHead = ATA_ADDRESS_DEVHEAD_STD; | |
1127 | ||
1128 | /* attempt to manually enumerate this device */ | |
1129 | retStatus = isd200_manual_enum(us); | |
1130 | if (retStatus == ISD200_GOOD) { | |
1131 | int transferStatus; | |
1132 | ||
1133 | /* check for an ATA device */ | |
1134 | if (info->DeviceFlags & DF_ATA_DEVICE) { | |
1135 | /* this must be an ATA device */ | |
1136 | /* perform an ATA Command Identify */ | |
1137 | transferStatus = isd200_action( us, ACTION_IDENTIFY, | |
d8881cda | 1138 | id, ATA_ID_WORDS * 2); |
1da177e4 LT |
1139 | if (transferStatus != ISD200_TRANSPORT_GOOD) { |
1140 | /* Error issuing ATA Command Identify */ | |
191648d0 | 1141 | usb_stor_dbg(us, " Error issuing ATA Command Identify\n"); |
1da177e4 LT |
1142 | retStatus = ISD200_ERROR; |
1143 | } else { | |
1144 | /* ATA Command Identify successful */ | |
1145 | int i; | |
1146 | __be16 *src; | |
1147 | __u16 *dest; | |
1da177e4 | 1148 | |
d8881cda | 1149 | isd200_fix_driveid(id); |
191648d0 | 1150 | isd200_dump_driveid(us, id); |
1da177e4 LT |
1151 | |
1152 | memset(&info->InquiryData, 0, sizeof(info->InquiryData)); | |
1153 | ||
1154 | /* Standard IDE interface only supports disks */ | |
1155 | info->InquiryData.DeviceType = DIRECT_ACCESS_DEVICE; | |
1156 | ||
1157 | /* The length must be at least 36 (5 + 31) */ | |
1158 | info->InquiryData.AdditionalLength = 0x1F; | |
1159 | ||
d8881cda | 1160 | if (id[ATA_ID_COMMAND_SET_1] & COMMANDSET_MEDIA_STATUS) { |
1da177e4 LT |
1161 | /* set the removable bit */ |
1162 | info->InquiryData.DeviceTypeModifier = DEVICE_REMOVABLE; | |
1163 | info->DeviceFlags |= DF_REMOVABLE_MEDIA; | |
1164 | } | |
1165 | ||
1166 | /* Fill in vendor identification fields */ | |
d8881cda | 1167 | src = (__be16 *)&id[ATA_ID_PROD]; |
1da177e4 LT |
1168 | dest = (__u16*)info->InquiryData.VendorId; |
1169 | for (i=0;i<4;i++) | |
1170 | dest[i] = be16_to_cpu(src[i]); | |
1171 | ||
d8881cda | 1172 | src = (__be16 *)&id[ATA_ID_PROD + 8/2]; |
1da177e4 LT |
1173 | dest = (__u16*)info->InquiryData.ProductId; |
1174 | for (i=0;i<8;i++) | |
1175 | dest[i] = be16_to_cpu(src[i]); | |
1176 | ||
d8881cda | 1177 | src = (__be16 *)&id[ATA_ID_FW_REV]; |
1da177e4 LT |
1178 | dest = (__u16*)info->InquiryData.ProductRevisionLevel; |
1179 | for (i=0;i<2;i++) | |
1180 | dest[i] = be16_to_cpu(src[i]); | |
1181 | ||
1182 | /* determine if it supports Media Status Notification */ | |
d8881cda | 1183 | if (id[ATA_ID_COMMAND_SET_2] & COMMANDSET_MEDIA_STATUS) { |
191648d0 | 1184 | usb_stor_dbg(us, " Device supports Media Status Notification\n"); |
1da177e4 | 1185 | |
f0183a33 FB |
1186 | /* |
1187 | * Indicate that it is enabled, even | |
1188 | * though it is not. | |
1189 | * This allows the lock/unlock of the | |
1190 | * media to work correctly. | |
1da177e4 LT |
1191 | */ |
1192 | info->DeviceFlags |= DF_MEDIA_STATUS_ENABLED; | |
1193 | } | |
1194 | else | |
1195 | info->DeviceFlags &= ~DF_MEDIA_STATUS_ENABLED; | |
1196 | ||
1197 | } | |
1198 | } else { | |
1199 | /* | |
1200 | * this must be an ATAPI device | |
1201 | * use an ATAPI protocol (Transparent SCSI) | |
1202 | */ | |
1203 | us->protocol_name = "Transparent SCSI"; | |
1204 | us->proto_handler = usb_stor_transparent_scsi_command; | |
1205 | ||
191648d0 JP |
1206 | usb_stor_dbg(us, "Protocol changed to: %s\n", |
1207 | us->protocol_name); | |
1da177e4 | 1208 | |
f0183a33 | 1209 | /* Free driver structure */ |
1da177e4 | 1210 | us->extra_destructor(info); |
ba2ef3b3 | 1211 | kfree(info); |
1da177e4 LT |
1212 | us->extra = NULL; |
1213 | us->extra_destructor = NULL; | |
1214 | } | |
1215 | } | |
1216 | ||
191648d0 | 1217 | usb_stor_dbg(us, "Leaving isd200_get_inquiry_data %08X\n", retStatus); |
1da177e4 LT |
1218 | |
1219 | return(retStatus); | |
1220 | } | |
1221 | ||
1da177e4 LT |
1222 | /************************************************************************** |
1223 | * isd200_scsi_to_ata | |
1224 | * | |
1225 | * Translate SCSI commands to ATA commands. | |
1226 | * | |
1227 | * RETURNS: | |
1228 | * 1 if the command needs to be sent to the transport layer | |
1229 | * 0 otherwise | |
1230 | */ | |
1231 | static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, | |
1232 | union ata_cdb * ataCdb) | |
1233 | { | |
1234 | struct isd200_info *info = (struct isd200_info *)us->extra; | |
d8881cda | 1235 | u16 *id = info->id; |
1da177e4 LT |
1236 | int sendToTransport = 1; |
1237 | unsigned char sectnum, head; | |
1238 | unsigned short cylinder; | |
1239 | unsigned long lba; | |
1240 | unsigned long blockCount; | |
1241 | unsigned char senseData[8] = { 0, 0, 0, 0, 0, 0, 0, 0 }; | |
1242 | ||
1243 | memset(ataCdb, 0, sizeof(union ata_cdb)); | |
1244 | ||
1245 | /* SCSI Command */ | |
1246 | switch (srb->cmnd[0]) { | |
1247 | case INQUIRY: | |
191648d0 | 1248 | usb_stor_dbg(us, " ATA OUT - INQUIRY\n"); |
1da177e4 LT |
1249 | |
1250 | /* copy InquiryData */ | |
1251 | usb_stor_set_xfer_buf((unsigned char *) &info->InquiryData, | |
1252 | sizeof(info->InquiryData), srb); | |
1253 | srb->result = SAM_STAT_GOOD; | |
1254 | sendToTransport = 0; | |
1255 | break; | |
1256 | ||
1257 | case MODE_SENSE: | |
191648d0 | 1258 | usb_stor_dbg(us, " ATA OUT - SCSIOP_MODE_SENSE\n"); |
1da177e4 LT |
1259 | |
1260 | /* Initialize the return buffer */ | |
1261 | usb_stor_set_xfer_buf(senseData, sizeof(senseData), srb); | |
1262 | ||
1263 | if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED) | |
1264 | { | |
1265 | ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; | |
1266 | ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; | |
1267 | ataCdb->generic.TransferBlockSize = 1; | |
1268 | ataCdb->generic.RegisterSelect = REG_COMMAND; | |
1269 | ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; | |
48c23d3e | 1270 | isd200_srb_set_bufflen(srb, 0); |
1da177e4 | 1271 | } else { |
191648d0 | 1272 | usb_stor_dbg(us, " Media Status not supported, just report okay\n"); |
1da177e4 LT |
1273 | srb->result = SAM_STAT_GOOD; |
1274 | sendToTransport = 0; | |
1275 | } | |
1276 | break; | |
1277 | ||
1278 | case TEST_UNIT_READY: | |
191648d0 | 1279 | usb_stor_dbg(us, " ATA OUT - SCSIOP_TEST_UNIT_READY\n"); |
1da177e4 LT |
1280 | |
1281 | if (info->DeviceFlags & DF_MEDIA_STATUS_ENABLED) | |
1282 | { | |
1283 | ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; | |
1284 | ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; | |
1285 | ataCdb->generic.TransferBlockSize = 1; | |
1286 | ataCdb->generic.RegisterSelect = REG_COMMAND; | |
1287 | ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; | |
48c23d3e | 1288 | isd200_srb_set_bufflen(srb, 0); |
1da177e4 | 1289 | } else { |
191648d0 | 1290 | usb_stor_dbg(us, " Media Status not supported, just report okay\n"); |
1da177e4 LT |
1291 | srb->result = SAM_STAT_GOOD; |
1292 | sendToTransport = 0; | |
1293 | } | |
1294 | break; | |
1295 | ||
1296 | case READ_CAPACITY: | |
1297 | { | |
1298 | unsigned long capacity; | |
1299 | struct read_capacity_data readCapacityData; | |
1300 | ||
191648d0 | 1301 | usb_stor_dbg(us, " ATA OUT - SCSIOP_READ_CAPACITY\n"); |
1da177e4 | 1302 | |
d8881cda BZ |
1303 | if (ata_id_has_lba(id)) |
1304 | capacity = ata_id_u32(id, ATA_ID_LBA_CAPACITY) - 1; | |
1305 | else | |
1306 | capacity = (id[ATA_ID_HEADS] * id[ATA_ID_CYLS] * | |
1307 | id[ATA_ID_SECTORS]) - 1; | |
1308 | ||
1da177e4 LT |
1309 | readCapacityData.LogicalBlockAddress = cpu_to_be32(capacity); |
1310 | readCapacityData.BytesPerBlock = cpu_to_be32(0x200); | |
1311 | ||
1312 | usb_stor_set_xfer_buf((unsigned char *) &readCapacityData, | |
1313 | sizeof(readCapacityData), srb); | |
1314 | srb->result = SAM_STAT_GOOD; | |
1315 | sendToTransport = 0; | |
1316 | } | |
1317 | break; | |
1318 | ||
1319 | case READ_10: | |
191648d0 | 1320 | usb_stor_dbg(us, " ATA OUT - SCSIOP_READ\n"); |
1da177e4 LT |
1321 | |
1322 | lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]); | |
1323 | blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8]; | |
1324 | ||
d8881cda | 1325 | if (ata_id_has_lba(id)) { |
1da177e4 LT |
1326 | sectnum = (unsigned char)(lba); |
1327 | cylinder = (unsigned short)(lba>>8); | |
1328 | head = ATA_ADDRESS_DEVHEAD_LBA_MODE | (unsigned char)(lba>>24 & 0x0F); | |
1329 | } else { | |
d8881cda BZ |
1330 | sectnum = (u8)((lba % id[ATA_ID_SECTORS]) + 1); |
1331 | cylinder = (u16)(lba / (id[ATA_ID_SECTORS] * | |
1332 | id[ATA_ID_HEADS])); | |
1333 | head = (u8)((lba / id[ATA_ID_SECTORS]) % | |
1334 | id[ATA_ID_HEADS]); | |
1da177e4 LT |
1335 | } |
1336 | ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; | |
1337 | ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; | |
1338 | ataCdb->generic.TransferBlockSize = 1; | |
1339 | ataCdb->generic.RegisterSelect = | |
1340 | REG_SECTOR_COUNT | REG_SECTOR_NUMBER | | |
1341 | REG_CYLINDER_LOW | REG_CYLINDER_HIGH | | |
1342 | REG_DEVICE_HEAD | REG_COMMAND; | |
1343 | ataCdb->write.SectorCountByte = (unsigned char)blockCount; | |
1344 | ataCdb->write.SectorNumberByte = sectnum; | |
1345 | ataCdb->write.CylinderHighByte = (unsigned char)(cylinder>>8); | |
1346 | ataCdb->write.CylinderLowByte = (unsigned char)cylinder; | |
1347 | ataCdb->write.DeviceHeadByte = (head | ATA_ADDRESS_DEVHEAD_STD); | |
f08f31f7 | 1348 | ataCdb->write.CommandByte = ATA_CMD_PIO_READ; |
1da177e4 LT |
1349 | break; |
1350 | ||
1351 | case WRITE_10: | |
191648d0 | 1352 | usb_stor_dbg(us, " ATA OUT - SCSIOP_WRITE\n"); |
1da177e4 LT |
1353 | |
1354 | lba = be32_to_cpu(*(__be32 *)&srb->cmnd[2]); | |
1355 | blockCount = (unsigned long)srb->cmnd[7]<<8 | (unsigned long)srb->cmnd[8]; | |
1356 | ||
d8881cda | 1357 | if (ata_id_has_lba(id)) { |
1da177e4 LT |
1358 | sectnum = (unsigned char)(lba); |
1359 | cylinder = (unsigned short)(lba>>8); | |
1360 | head = ATA_ADDRESS_DEVHEAD_LBA_MODE | (unsigned char)(lba>>24 & 0x0F); | |
1361 | } else { | |
d8881cda BZ |
1362 | sectnum = (u8)((lba % id[ATA_ID_SECTORS]) + 1); |
1363 | cylinder = (u16)(lba / (id[ATA_ID_SECTORS] * | |
1364 | id[ATA_ID_HEADS])); | |
1365 | head = (u8)((lba / id[ATA_ID_SECTORS]) % | |
1366 | id[ATA_ID_HEADS]); | |
1da177e4 LT |
1367 | } |
1368 | ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; | |
1369 | ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; | |
1370 | ataCdb->generic.TransferBlockSize = 1; | |
1371 | ataCdb->generic.RegisterSelect = | |
1372 | REG_SECTOR_COUNT | REG_SECTOR_NUMBER | | |
1373 | REG_CYLINDER_LOW | REG_CYLINDER_HIGH | | |
1374 | REG_DEVICE_HEAD | REG_COMMAND; | |
1375 | ataCdb->write.SectorCountByte = (unsigned char)blockCount; | |
1376 | ataCdb->write.SectorNumberByte = sectnum; | |
1377 | ataCdb->write.CylinderHighByte = (unsigned char)(cylinder>>8); | |
1378 | ataCdb->write.CylinderLowByte = (unsigned char)cylinder; | |
1379 | ataCdb->write.DeviceHeadByte = (head | ATA_ADDRESS_DEVHEAD_STD); | |
f08f31f7 | 1380 | ataCdb->write.CommandByte = ATA_CMD_PIO_WRITE; |
1da177e4 LT |
1381 | break; |
1382 | ||
1383 | case ALLOW_MEDIUM_REMOVAL: | |
191648d0 | 1384 | usb_stor_dbg(us, " ATA OUT - SCSIOP_MEDIUM_REMOVAL\n"); |
1da177e4 LT |
1385 | |
1386 | if (info->DeviceFlags & DF_REMOVABLE_MEDIA) { | |
191648d0 JP |
1387 | usb_stor_dbg(us, " srb->cmnd[4] = 0x%X\n", |
1388 | srb->cmnd[4]); | |
1da177e4 LT |
1389 | |
1390 | ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; | |
1391 | ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; | |
1392 | ataCdb->generic.TransferBlockSize = 1; | |
1393 | ataCdb->generic.RegisterSelect = REG_COMMAND; | |
1394 | ataCdb->write.CommandByte = (srb->cmnd[4] & 0x1) ? | |
f08f31f7 | 1395 | ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK; |
48c23d3e | 1396 | isd200_srb_set_bufflen(srb, 0); |
1da177e4 | 1397 | } else { |
191648d0 | 1398 | usb_stor_dbg(us, " Not removeable media, just report okay\n"); |
1da177e4 LT |
1399 | srb->result = SAM_STAT_GOOD; |
1400 | sendToTransport = 0; | |
1401 | } | |
1402 | break; | |
1403 | ||
1404 | case START_STOP: | |
191648d0 JP |
1405 | usb_stor_dbg(us, " ATA OUT - SCSIOP_START_STOP_UNIT\n"); |
1406 | usb_stor_dbg(us, " srb->cmnd[4] = 0x%X\n", srb->cmnd[4]); | |
1da177e4 LT |
1407 | |
1408 | if ((srb->cmnd[4] & 0x3) == 0x2) { | |
191648d0 | 1409 | usb_stor_dbg(us, " Media Eject\n"); |
1da177e4 LT |
1410 | ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; |
1411 | ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; | |
1412 | ataCdb->generic.TransferBlockSize = 0; | |
1413 | ataCdb->generic.RegisterSelect = REG_COMMAND; | |
1414 | ataCdb->write.CommandByte = ATA_COMMAND_MEDIA_EJECT; | |
1415 | } else if ((srb->cmnd[4] & 0x3) == 0x1) { | |
191648d0 | 1416 | usb_stor_dbg(us, " Get Media Status\n"); |
1da177e4 LT |
1417 | ataCdb->generic.SignatureByte0 = info->ConfigData.ATAMajorCommand; |
1418 | ataCdb->generic.SignatureByte1 = info->ConfigData.ATAMinorCommand; | |
1419 | ataCdb->generic.TransferBlockSize = 1; | |
1420 | ataCdb->generic.RegisterSelect = REG_COMMAND; | |
1421 | ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; | |
48c23d3e | 1422 | isd200_srb_set_bufflen(srb, 0); |
1da177e4 | 1423 | } else { |
191648d0 | 1424 | usb_stor_dbg(us, " Nothing to do, just report okay\n"); |
1da177e4 LT |
1425 | srb->result = SAM_STAT_GOOD; |
1426 | sendToTransport = 0; | |
1427 | } | |
1428 | break; | |
1429 | ||
1430 | default: | |
191648d0 JP |
1431 | usb_stor_dbg(us, "Unsupported SCSI command - 0x%X\n", |
1432 | srb->cmnd[0]); | |
1da177e4 LT |
1433 | srb->result = DID_ERROR << 16; |
1434 | sendToTransport = 0; | |
1435 | break; | |
1436 | } | |
1437 | ||
1438 | return(sendToTransport); | |
1439 | } | |
1440 | ||
1441 | ||
1442 | /************************************************************************** | |
1443 | * isd200_free_info | |
1444 | * | |
1445 | * Frees the driver structure. | |
1446 | */ | |
1447 | static void isd200_free_info_ptrs(void *info_) | |
1448 | { | |
1449 | struct isd200_info *info = (struct isd200_info *) info_; | |
1450 | ||
1451 | if (info) { | |
1452 | kfree(info->id); | |
1453 | kfree(info->RegsBuf); | |
e92e63aa | 1454 | kfree(info->srb.sense_buffer); |
1da177e4 LT |
1455 | } |
1456 | } | |
1457 | ||
1458 | /************************************************************************** | |
1459 | * isd200_init_info | |
1460 | * | |
1461 | * Allocates (if necessary) and initializes the driver structure. | |
1462 | * | |
1463 | * RETURNS: | |
1464 | * ISD status code | |
1465 | */ | |
1466 | static int isd200_init_info(struct us_data *us) | |
1467 | { | |
1da177e4 LT |
1468 | struct isd200_info *info; |
1469 | ||
a5cc8049 | 1470 | info = kzalloc(sizeof(struct isd200_info), GFP_KERNEL); |
1da177e4 | 1471 | if (!info) |
8091e0ca | 1472 | return ISD200_ERROR; |
1da177e4 | 1473 | |
8091e0ca KB |
1474 | info->id = kzalloc(ATA_ID_WORDS * 2, GFP_KERNEL); |
1475 | info->RegsBuf = kmalloc(sizeof(info->ATARegs), GFP_KERNEL); | |
1476 | info->srb.sense_buffer = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL); | |
1477 | ||
1478 | if (!info->id || !info->RegsBuf || !info->srb.sense_buffer) { | |
1479 | isd200_free_info_ptrs(info); | |
1480 | kfree(info); | |
1481 | return ISD200_ERROR; | |
191648d0 | 1482 | } |
1da177e4 | 1483 | |
8091e0ca KB |
1484 | us->extra = info; |
1485 | us->extra_destructor = isd200_free_info_ptrs; | |
1486 | ||
1487 | return ISD200_GOOD; | |
1da177e4 LT |
1488 | } |
1489 | ||
1490 | /************************************************************************** | |
1491 | * Initialization for the ISD200 | |
1492 | */ | |
1493 | ||
32d5493e | 1494 | static int isd200_Initialization(struct us_data *us) |
1da177e4 | 1495 | { |
191648d0 | 1496 | usb_stor_dbg(us, "ISD200 Initialization...\n"); |
1da177e4 LT |
1497 | |
1498 | /* Initialize ISD200 info struct */ | |
1499 | ||
1500 | if (isd200_init_info(us) == ISD200_ERROR) { | |
191648d0 | 1501 | usb_stor_dbg(us, "ERROR Initializing ISD200 Info struct\n"); |
1da177e4 LT |
1502 | } else { |
1503 | /* Get device specific data */ | |
1504 | ||
1505 | if (isd200_get_inquiry_data(us) != ISD200_GOOD) | |
191648d0 | 1506 | usb_stor_dbg(us, "ISD200 Initialization Failure\n"); |
1da177e4 | 1507 | else |
191648d0 | 1508 | usb_stor_dbg(us, "ISD200 Initialization complete\n"); |
1da177e4 LT |
1509 | } |
1510 | ||
1511 | return 0; | |
1512 | } | |
1513 | ||
1514 | ||
1515 | /************************************************************************** | |
1516 | * Protocol and Transport for the ISD200 ASIC | |
1517 | * | |
1518 | * This protocol and transport are for ATA devices connected to an ISD200 | |
25985edc | 1519 | * ASIC. An ATAPI device that is connected as a slave device will be |
1da177e4 LT |
1520 | * detected in the driver initialization function and the protocol will |
1521 | * be changed to an ATAPI protocol (Transparent SCSI). | |
1522 | * | |
1523 | */ | |
1524 | ||
32d5493e | 1525 | static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) |
1da177e4 | 1526 | { |
48c23d3e | 1527 | int sendToTransport = 1, orig_bufflen; |
1da177e4 LT |
1528 | union ata_cdb ataCdb; |
1529 | ||
1530 | /* Make sure driver was initialized */ | |
1531 | ||
1532 | if (us->extra == NULL) | |
191648d0 | 1533 | usb_stor_dbg(us, "ERROR Driver not initialized\n"); |
1da177e4 | 1534 | |
48c23d3e BH |
1535 | scsi_set_resid(srb, 0); |
1536 | /* scsi_bufflen might change in protocol translation to ata */ | |
1537 | orig_bufflen = scsi_bufflen(srb); | |
1da177e4 LT |
1538 | sendToTransport = isd200_scsi_to_ata(srb, us, &ataCdb); |
1539 | ||
1540 | /* send the command to the transport layer */ | |
1541 | if (sendToTransport) | |
1542 | isd200_invoke_transport(us, srb, &ataCdb); | |
48c23d3e BH |
1543 | |
1544 | isd200_srb_set_bufflen(srb, orig_bufflen); | |
1da177e4 | 1545 | } |
32d5493e | 1546 | |
aa519be3 AM |
1547 | static struct scsi_host_template isd200_host_template; |
1548 | ||
32d5493e AS |
1549 | static int isd200_probe(struct usb_interface *intf, |
1550 | const struct usb_device_id *id) | |
1551 | { | |
1552 | struct us_data *us; | |
1553 | int result; | |
1554 | ||
1555 | result = usb_stor_probe1(&us, intf, id, | |
aa519be3 AM |
1556 | (id - isd200_usb_ids) + isd200_unusual_dev_list, |
1557 | &isd200_host_template); | |
32d5493e AS |
1558 | if (result) |
1559 | return result; | |
1560 | ||
1561 | us->protocol_name = "ISD200 ATA/ATAPI"; | |
1562 | us->proto_handler = isd200_ata_command; | |
1563 | ||
1564 | result = usb_stor_probe2(us); | |
1565 | return result; | |
1566 | } | |
1567 | ||
1568 | static struct usb_driver isd200_driver = { | |
aa519be3 | 1569 | .name = DRV_NAME, |
32d5493e AS |
1570 | .probe = isd200_probe, |
1571 | .disconnect = usb_stor_disconnect, | |
1572 | .suspend = usb_stor_suspend, | |
1573 | .resume = usb_stor_resume, | |
1574 | .reset_resume = usb_stor_reset_resume, | |
1575 | .pre_reset = usb_stor_pre_reset, | |
1576 | .post_reset = usb_stor_post_reset, | |
1577 | .id_table = isd200_usb_ids, | |
1578 | .soft_unbind = 1, | |
e73b2db6 | 1579 | .no_dynamic_id = 1, |
32d5493e AS |
1580 | }; |
1581 | ||
aa519be3 | 1582 | module_usb_stor_driver(isd200_driver, isd200_host_template, DRV_NAME); |