[deliverable/linux.git] / drivers / video / via / via-core.h

/*
 * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
 * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
 * Copyright 2009 Jonathan Corbet <corbet@lwn.net>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public
 * License as published by the Free Software Foundation;
 * either version 2, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
 * the implied warranty of MERCHANTABILITY or FITNESS FOR
 * A PARTICULAR PURPOSE.See the GNU General Public License
 * for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc.,
 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 */

#ifndef __VIA_CORE_H__
#define __VIA_CORE_H__
#include <linux/spinlock.h>
#include <linux/pci.h>

/*
 * A description of each known serial I2C/GPIO port.
 */
enum via_port_type {
	VIA_PORT_NONE = 0,
	VIA_PORT_I2C,
	VIA_PORT_GPIO,
};

enum via_port_mode {
	VIA_MODE_OFF = 0,
	VIA_MODE_I2C,		/* Used as I2C port */
	VIA_MODE_GPIO,	/* Two GPIO ports */
};

enum viafb_i2c_adap {
	VIA_PORT_26 = 0,
	VIA_PORT_31,
	VIA_PORT_25,
	VIA_PORT_2C,
	VIA_PORT_3D,
};
#define VIAFB_NUM_PORTS 5

struct via_port_cfg {
	enum via_port_type	type;
	enum via_port_mode	mode;
	u16			io_port;
	u8			ioport_index;
};

/*
 * This is the global viafb "device" containing stuff needed by
 * all subdevs.
 */
struct viafb_dev {
	struct pci_dev *pdev;
	int chip_type;
	struct via_port_cfg *port_cfg;
	/*
	 * Spinlock for access to device registers.  Not yet
	 * globally used.
	 */
	spinlock_t reg_lock;
	/*
	 * The framebuffer MMIO region.  Little, if anything, touches
	 * this memory directly, and certainly nothing outside of the
	 * framebuffer device itself.  We *do* have to be able to allocate
	 * chunks of this memory for other devices, though.
	 */
	unsigned long fbmem_start;
	long fbmem_len;
	void __iomem *fbmem;
#if defined(CONFIG_FB_VIA_CAMERA) || defined(CONFIG_FB_VIA_CAMERA_MODULE)
	long camera_fbmem_offset;
	long camera_fbmem_size;
#endif
	/*
	 * The MMIO region for device registers.
	 */
	unsigned long engine_start;
	unsigned long engine_len;
	void __iomem *engine_mmio;

};

/*
 * Interrupt management.
 */

void viafb_irq_enable(u32 mask);
void viafb_irq_disable(u32 mask);

/*
 * The global interrupt control register and its bits.
 */
#define VDE_INTERRUPT	0x200	/* Video interrupt flags/masks */
#define   VDE_I_DVISENSE  0x00000001  /* DVI sense int status */
#define   VDE_I_VBLANK    0x00000002  /* Vertical blank status */
#define   VDE_I_MCCFI	  0x00000004  /* MCE compl. frame int status */
#define   VDE_I_VSYNC	  0x00000008  /* VGA VSYNC int status */
#define   VDE_I_DMA0DDONE 0x00000010  /* DMA 0 descr done */
#define   VDE_I_DMA0TDONE 0x00000020  /* DMA 0 transfer done */
#define   VDE_I_DMA1DDONE 0x00000040  /* DMA 1 descr done */
#define   VDE_I_DMA1TDONE 0x00000080  /* DMA 1 transfer done */
#define   VDE_I_C1AV      0x00000100  /* Cap Eng 1 act vid end */
#define   VDE_I_HQV0	  0x00000200  /* First HQV engine */
#define   VDE_I_HQV1      0x00000400  /* Second HQV engine */
#define   VDE_I_HQV1EN	  0x00000800  /* Second HQV engine enable */
#define   VDE_I_C0AV      0x00001000  /* Cap Eng 0 act vid end */
#define   VDE_I_C0VBI     0x00002000  /* Cap Eng 0 VBI end */
#define   VDE_I_C1VBI     0x00004000  /* Cap Eng 1 VBI end */
#define   VDE_I_VSYNC2    0x00008000  /* Sec. Disp. VSYNC */
#define   VDE_I_DVISNSEN  0x00010000  /* DVI sense enable */
#define   VDE_I_VSYNC2EN  0x00020000  /* Sec Disp VSYNC enable */
#define   VDE_I_MCCFIEN	  0x00040000  /* MC comp frame int mask enable */
#define   VDE_I_VSYNCEN   0x00080000  /* VSYNC enable */
#define   VDE_I_DMA0DDEN  0x00100000  /* DMA 0 descr done enable */
#define   VDE_I_DMA0TDEN  0x00200000  /* DMA 0 trans done enable */
#define   VDE_I_DMA1DDEN  0x00400000  /* DMA 1 descr done enable */
#define   VDE_I_DMA1TDEN  0x00800000  /* DMA 1 trans done enable */
#define   VDE_I_C1AVEN    0x01000000  /* cap 1 act vid end enable */
#define   VDE_I_HQV0EN	  0x02000000  /* First hqv engine enable */
#define   VDE_I_C1VBIEN	  0x04000000  /* Cap 1 VBI end enable */
#define   VDE_I_LVDSSI    0x08000000  /* LVDS sense interrupt */
#define   VDE_I_C0AVEN    0x10000000  /* Cap 0 act vid end enable */
#define   VDE_I_C0VBIEN   0x20000000  /* Cap 0 VBI end enable */
#define   VDE_I_LVDSSIEN  0x40000000  /* LVDS Sense enable */
#define   VDE_I_ENABLE	  0x80000000  /* Global interrupt enable */

/*
 * DMA management.
 */
int viafb_request_dma(void);
void viafb_release_dma(void);
/* void viafb_dma_copy_out(unsigned int offset, dma_addr_t paddr, int len); */
int viafb_dma_copy_out_sg(unsigned int offset, struct scatterlist *sg, int nsg);

/*
 * DMA Controller registers.
 */
#define VDMA_MR0	0xe00		/* Mod reg 0 */
#define   VDMA_MR_CHAIN   0x01		/* Chaining mode */
#define   VDMA_MR_TDIE    0x02		/* Transfer done int enable */
#define VDMA_CSR0	0xe04		/* Control/status */
#define	  VDMA_C_ENABLE	  0x01		  /* DMA Enable */
#define	  VDMA_C_START	  0x02		  /* Start a transfer */
#define	  VDMA_C_ABORT	  0x04		  /* Abort a transfer */
#define	  VDMA_C_DONE	  0x08		  /* Transfer is done */
#define VDMA_MARL0	0xe20		/* Mem addr low */
#define VDMA_MARH0	0xe24		/* Mem addr high */
#define VDMA_DAR0	0xe28		/* Device address */
#define VDMA_DQWCR0	0xe2c		/* Count (16-byte) */
#define VDMA_TMR0	0xe30		/* Tile mode reg */
#define VDMA_DPRL0	0xe34		/* Not sure */
#define	  VDMA_DPR_IN	  0x08		/* Inbound transfer to FB */
#define VDMA_DPRH0	0xe38
#define VDMA_PMR0	(0xe00 + 0x134) /* Pitch mode */

/*
 * Useful stuff that probably belongs somewhere global.
 */
#define VGA_WIDTH	640
#define VGA_HEIGHT	480

#endif /* __VIA_CORE_H__ */
Commit	Line	Data
f045f77b JC	1	/*
	2	* Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
	3	* Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
	4	* Copyright 2009 Jonathan Corbet <corbet@lwn.net>
	5	*
	6	* This program is free software; you can redistribute it and/or
	7	* modify it under the terms of the GNU General Public
	8	* License as published by the Free Software Foundation;
	9	* either version 2, or (at your option) any later version.
	10	*
	11	* This program is distributed in the hope that it will be useful,
	12	* but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
	13	* the implied warranty of MERCHANTABILITY or FITNESS FOR
	14	* A PARTICULAR PURPOSE.See the GNU General Public License
	15	* for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License
	18	* along with this program; if not, write to the Free Software
	19	* Foundation, Inc.,
	20	* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
	21	*/
	22
	23	#ifndef __VIA_CORE_H__
	24	#define __VIA_CORE_H__
24b4d82e JC	25	#include <linux/spinlock.h>
	26	#include <linux/pci.h>
	27
f045f77b JC	28	/*
	29	* A description of each known serial I2C/GPIO port.
	30	*/
	31	enum via_port_type {
	32	VIA_PORT_NONE = 0,
	33	VIA_PORT_I2C,
	34	VIA_PORT_GPIO,
	35	};
	36
	37	enum via_port_mode {
	38	VIA_MODE_OFF = 0,
	39	VIA_MODE_I2C, /* Used as I2C port */
	40	VIA_MODE_GPIO, /* Two GPIO ports */
	41	};
	42
	43	enum viafb_i2c_adap {
	44	VIA_PORT_26 = 0,
	45	VIA_PORT_31,
	46	VIA_PORT_25,
	47	VIA_PORT_2C,
	48	VIA_PORT_3D,
	49	};
	50	#define VIAFB_NUM_PORTS 5
	51
	52	struct via_port_cfg {
	53	enum via_port_type type;
	54	enum via_port_mode mode;
24b4d82e JC	55	u16 io_port;
24b4d82e JC	56	u8 ioport_index;
f045f77b	57	};
24b4d82e JC	58
	59	/*
	60	* This is the global viafb "device" containing stuff needed by
	61	* all subdevs.
	62	*/
	63	struct viafb_dev {
	64	struct pci_dev *pdev;
	65	int chip_type;
7582eb9b	66	struct via_port_cfg *port_cfg;
24b4d82e JC	67	/*
	68	* Spinlock for access to device registers. Not yet
	69	* globally used.
	70	*/
	71	spinlock_t reg_lock;
	72	/*
	73	* The framebuffer MMIO region. Little, if anything, touches
	74	* this memory directly, and certainly nothing outside of the
	75	* framebuffer device itself. We do have to be able to allocate
	76	* chunks of this memory for other devices, though.
	77	*/
	78	unsigned long fbmem_start;
	79	long fbmem_len;
	80	void __iomem *fbmem;
c2b12cd4 JC	81	#if defined(CONFIG_FB_VIA_CAMERA) \|\| defined(CONFIG_FB_VIA_CAMERA_MODULE)
	82	long camera_fbmem_offset;
	83	long camera_fbmem_size;
	84	#endif
24b4d82e JC	85	/*
	86	* The MMIO region for device registers.
	87	*/
	88	unsigned long engine_start;
	89	unsigned long engine_len;
	90	void __iomem *engine_mmio;
	91
	92	};
	93
94dd1a85 JC	94	/*
	95	* Interrupt management.
	96	*/
	97
	98	void viafb_irq_enable(u32 mask);
	99	void viafb_irq_disable(u32 mask);
	100
	101	/*
	102	* The global interrupt control register and its bits.
	103	*/
	104	#define VDE_INTERRUPT 0x200 /* Video interrupt flags/masks */
	105	#define VDE_I_DVISENSE 0x00000001 /* DVI sense int status */
	106	#define VDE_I_VBLANK 0x00000002 /* Vertical blank status */
	107	#define VDE_I_MCCFI 0x00000004 /* MCE compl. frame int status */
	108	#define VDE_I_VSYNC 0x00000008 /* VGA VSYNC int status */
	109	#define VDE_I_DMA0DDONE 0x00000010 /* DMA 0 descr done */
	110	#define VDE_I_DMA0TDONE 0x00000020 /* DMA 0 transfer done */
	111	#define VDE_I_DMA1DDONE 0x00000040 /* DMA 1 descr done */
	112	#define VDE_I_DMA1TDONE 0x00000080 /* DMA 1 transfer done */
	113	#define VDE_I_C1AV 0x00000100 /* Cap Eng 1 act vid end */
	114	#define VDE_I_HQV0 0x00000200 /* First HQV engine */
	115	#define VDE_I_HQV1 0x00000400 /* Second HQV engine */
	116	#define VDE_I_HQV1EN 0x00000800 /* Second HQV engine enable */
	117	#define VDE_I_C0AV 0x00001000 /* Cap Eng 0 act vid end */
	118	#define VDE_I_C0VBI 0x00002000 /* Cap Eng 0 VBI end */
	119	#define VDE_I_C1VBI 0x00004000 /* Cap Eng 1 VBI end */
	120	#define VDE_I_VSYNC2 0x00008000 /* Sec. Disp. VSYNC */
	121	#define VDE_I_DVISNSEN 0x00010000 /* DVI sense enable */
	122	#define VDE_I_VSYNC2EN 0x00020000 /* Sec Disp VSYNC enable */
	123	#define VDE_I_MCCFIEN 0x00040000 /* MC comp frame int mask enable */
	124	#define VDE_I_VSYNCEN 0x00080000 /* VSYNC enable */
	125	#define VDE_I_DMA0DDEN 0x00100000 /* DMA 0 descr done enable */
	126	#define VDE_I_DMA0TDEN 0x00200000 /* DMA 0 trans done enable */
	127	#define VDE_I_DMA1DDEN 0x00400000 /* DMA 1 descr done enable */
	128	#define VDE_I_DMA1TDEN 0x00800000 /* DMA 1 trans done enable */
	129	#define VDE_I_C1AVEN 0x01000000 /* cap 1 act vid end enable */
	130	#define VDE_I_HQV0EN 0x02000000 /* First hqv engine enable */
	131	#define VDE_I_C1VBIEN 0x04000000 /* Cap 1 VBI end enable */
	132	#define VDE_I_LVDSSI 0x08000000 /* LVDS sense interrupt */
	133	#define VDE_I_C0AVEN 0x10000000 /* Cap 0 act vid end enable */
	134	#define VDE_I_C0VBIEN 0x20000000 /* Cap 0 VBI end enable */
	135	#define VDE_I_LVDSSIEN 0x40000000 /* LVDS Sense enable */
	136	#define VDE_I_ENABLE 0x80000000 /* Global interrupt enable */
	137
3d28eb42 JC	138	/*
	139	* DMA management.
	140	*/
	141	int viafb_request_dma(void);
	142	void viafb_release_dma(void);
	143	/* void viafb_dma_copy_out(unsigned int offset, dma_addr_t paddr, int len); */
	144	int viafb_dma_copy_out_sg(unsigned int offset, struct scatterlist *sg, int nsg);
	145
	146	/*
	147	* DMA Controller registers.
	148	*/
	149	#define VDMA_MR0 0xe00 /* Mod reg 0 */
	150	#define VDMA_MR_CHAIN 0x01 /* Chaining mode */
	151	#define VDMA_MR_TDIE 0x02 /* Transfer done int enable */
	152	#define VDMA_CSR0 0xe04 /* Control/status */
	153	#define VDMA_C_ENABLE 0x01 /* DMA Enable */
	154	#define VDMA_C_START 0x02 /* Start a transfer */
	155	#define VDMA_C_ABORT 0x04 /* Abort a transfer */
	156	#define VDMA_C_DONE 0x08 /* Transfer is done */
	157	#define VDMA_MARL0 0xe20 /* Mem addr low */
	158	#define VDMA_MARH0 0xe24 /* Mem addr high */
	159	#define VDMA_DAR0 0xe28 /* Device address */
	160	#define VDMA_DQWCR0 0xe2c /* Count (16-byte) */
	161	#define VDMA_TMR0 0xe30 /* Tile mode reg */
	162	#define VDMA_DPRL0 0xe34 /* Not sure */
	163	#define VDMA_DPR_IN 0x08 /* Inbound transfer to FB */
	164	#define VDMA_DPRH0 0xe38
	165	#define VDMA_PMR0 (0xe00 + 0x134) /* Pitch mode */
	166
c2b12cd4 JC	167	/*
	168	* Useful stuff that probably belongs somewhere global.
	169	*/
	170	#define VGA_WIDTH 640
	171	#define VGA_HEIGHT 480
	172
f045f77b	173	#endif /* __VIA_CORE_H__ */