Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Watchdog device configuration | |
3 | # | |
4 | ||
261259b2 | 5 | menuconfig WATCHDOG |
1da177e4 LT |
6 | bool "Watchdog Timer Support" |
7 | ---help--- | |
8 | If you say Y here (and to one of the following options) and create a | |
9 | character special file /dev/watchdog with major number 10 and minor | |
10 | number 130 using mknod ("man mknod"), you will get a watchdog, i.e.: | |
11 | subsequently opening the file and then failing to write to it for | |
12 | longer than 1 minute will result in rebooting the machine. This | |
13 | could be useful for a networked machine that needs to come back | |
e0845bf4 | 14 | on-line as fast as possible after a lock-up. There's both a watchdog |
1da177e4 LT |
15 | implementation entirely in software (which can sometimes fail to |
16 | reboot the machine) and a driver for hardware watchdog boards, which | |
17 | are more robust and can also keep track of the temperature inside | |
e403149c DH |
18 | your computer. For details, read |
19 | <file:Documentation/watchdog/watchdog-api.txt> in the kernel source. | |
1da177e4 LT |
20 | |
21 | The watchdog is usually used together with the watchdog daemon | |
22 | which is available from | |
23 | <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can | |
24 | also monitor NFS connections and can reboot the machine when the process | |
25 | table is full. | |
26 | ||
27 | If unsure, say N. | |
28 | ||
261259b2 JE |
29 | if WATCHDOG |
30 | ||
1da177e4 LT |
31 | config WATCHDOG_NOWAYOUT |
32 | bool "Disable watchdog shutdown on close" | |
1da177e4 LT |
33 | help |
34 | The default watchdog behaviour (which you get if you say N here) is | |
35 | to stop the timer if the process managing it closes the file | |
36 | /dev/watchdog. It's always remotely possible that this process might | |
37 | get killed. If you say Y here, the watchdog cannot be stopped once | |
38 | it has been started. | |
39 | ||
40 | # | |
41 | # General Watchdog drivers | |
42 | # | |
43 | ||
44 | comment "Watchdog Device Drivers" | |
1da177e4 | 45 | |
2621e2a1 | 46 | # Architecture Independent |
1da177e4 LT |
47 | |
48 | config SOFT_WATCHDOG | |
49 | tristate "Software watchdog" | |
1da177e4 LT |
50 | help |
51 | A software monitoring watchdog. This will fail to reboot your system | |
52 | from some situations that the hardware watchdog will recover | |
53 | from. Equally it's a lot cheaper to install. | |
54 | ||
55 | To compile this driver as a module, choose M here: the | |
56 | module will be called softdog. | |
57 | ||
006948ba MB |
58 | config WM8350_WATCHDOG |
59 | tristate "WM8350 watchdog" | |
60 | depends on MFD_WM8350 | |
61 | help | |
62 | Support for the watchdog in the WM8350 AudioPlus PMIC. When | |
63 | the watchdog triggers the system will be reset. | |
64 | ||
c0e962f9 WVS |
65 | # ALPHA Architecture |
66 | ||
1da177e4 LT |
67 | # ARM Architecture |
68 | ||
bdcff345 | 69 | config AT91RM9200_WATCHDOG |
853807fb | 70 | tristate "AT91RM9200 watchdog" |
261259b2 | 71 | depends on ARCH_AT91RM9200 |
853807fb AV |
72 | help |
73 | Watchdog timer embedded into AT91RM9200 chips. This will reboot your | |
74 | system when the timeout is reached. | |
75 | ||
e6bb42e3 | 76 | config AT91SAM9X_WATCHDOG |
f0e625c1 AV |
77 | tristate "AT91SAM9X / AT91CAP9 watchdog" |
78 | depends on ARCH_AT91 && !ARCH_AT91RM9200 | |
e6bb42e3 | 79 | help |
f0e625c1 AV |
80 | Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will |
81 | reboot your system when the timeout is reached. | |
e6bb42e3 | 82 | |
1da177e4 LT |
83 | config 21285_WATCHDOG |
84 | tristate "DC21285 watchdog" | |
261259b2 | 85 | depends on FOOTBRIDGE |
1da177e4 | 86 | help |
e0845bf4 | 87 | The Intel Footbridge chip contains a built-in watchdog circuit. Say Y |
1da177e4 LT |
88 | here if you wish to use this. Alternatively say M to compile the |
89 | driver as a module, which will be called wdt285. | |
90 | ||
91 | This driver does not work on all machines. In particular, early CATS | |
92 | boards have hardware problems that will cause the machine to simply | |
93 | lock up if the watchdog fires. | |
94 | ||
95 | "If in doubt, leave it out" - say N. | |
96 | ||
97 | config 977_WATCHDOG | |
98 | tristate "NetWinder WB83C977 watchdog" | |
261259b2 | 99 | depends on FOOTBRIDGE && ARCH_NETWINDER |
1da177e4 LT |
100 | help |
101 | Say Y here to include support for the WB977 watchdog included in | |
102 | NetWinder machines. Alternatively say M to compile the driver as | |
103 | a module, which will be called wdt977. | |
104 | ||
105 | Not sure? It's safe to say N. | |
106 | ||
180536f8 WVS |
107 | config IXP2000_WATCHDOG |
108 | tristate "IXP2000 Watchdog" | |
261259b2 | 109 | depends on ARCH_IXP2000 |
180536f8 WVS |
110 | help |
111 | Say Y here if to include support for the watchdog timer | |
112 | in the Intel IXP2000(2400, 2800, 2850) network processors. | |
113 | This driver can be built as a module by choosing M. The module | |
114 | will be called ixp2000_wdt. | |
115 | ||
116 | Say N if you are unsure. | |
117 | ||
1da177e4 LT |
118 | config IXP4XX_WATCHDOG |
119 | tristate "IXP4xx Watchdog" | |
261259b2 | 120 | depends on ARCH_IXP4XX |
1da177e4 LT |
121 | help |
122 | Say Y here if to include support for the watchdog timer | |
123 | in the Intel IXP4xx network processors. This driver can | |
124 | be built as a module by choosing M. The module will | |
125 | be called ixp4xx_wdt. | |
126 | ||
127 | Note: The internal IXP4xx watchdog does a soft CPU reset | |
128 | which doesn't reset any peripherals. There are circumstances | |
129 | where the watchdog will fail to reset the board correctly | |
130 | (e.g., if the boot ROM is in an unreadable state). | |
131 | ||
132 | Say N if you are unsure. | |
133 | ||
ccb8f430 AV |
134 | config KS8695_WATCHDOG |
135 | tristate "KS8695 watchdog" | |
136 | depends on ARCH_KS8695 | |
137 | help | |
138 | Watchdog timer embedded into KS8695 processor. This will reboot your | |
139 | system when the timeout is reached. | |
140 | ||
1da177e4 LT |
141 | config S3C2410_WATCHDOG |
142 | tristate "S3C2410 Watchdog" | |
261259b2 | 143 | depends on ARCH_S3C2410 |
1da177e4 LT |
144 | help |
145 | Watchdog timer block in the Samsung S3C2410 chips. This will | |
146 | reboot the system when the timer expires with the watchdog | |
147 | enabled. | |
148 | ||
149 | The driver is limited by the speed of the system's PCLK | |
2621e2a1 | 150 | signal, so with reasonably fast systems (PCLK around 50-66MHz) |
1da177e4 LT |
151 | then watchdog intervals of over approximately 20seconds are |
152 | unavailable. | |
153 | ||
154 | The driver can be built as a module by choosing M, and will | |
155 | be called s3c2410_wdt | |
156 | ||
157 | config SA1100_WATCHDOG | |
158 | tristate "SA1100/PXA2xx watchdog" | |
261259b2 | 159 | depends on ARCH_SA1100 || ARCH_PXA |
1da177e4 LT |
160 | help |
161 | Watchdog timer embedded into SA11x0 and PXA2xx chips. This will | |
162 | reboot your system when timeout is reached. | |
163 | ||
164 | NOTE: once enabled, this timer cannot be disabled. | |
165 | ||
166 | To compile this driver as a module, choose M here: the | |
167 | module will be called sa1100_wdt. | |
168 | ||
b9d36b85 RK |
169 | config MPCORE_WATCHDOG |
170 | tristate "MPcore watchdog" | |
261259b2 | 171 | depends on ARM_MPCORE_PLATFORM && LOCAL_TIMERS |
b9d36b85 RK |
172 | help |
173 | Watchdog timer embedded into the MPcore system. | |
174 | ||
175 | To compile this driver as a module, choose M here: the | |
176 | module will be called mpcore_wdt. | |
177 | ||
f52ac8fe AZ |
178 | config EP93XX_WATCHDOG |
179 | tristate "EP93xx Watchdog" | |
261259b2 | 180 | depends on ARCH_EP93XX |
f52ac8fe AZ |
181 | help |
182 | Say Y here if to include support for the watchdog timer | |
183 | embedded in the Cirrus Logic EP93xx family of devices. | |
184 | ||
185 | To compile this driver as a module, choose M here: the | |
186 | module will be called ep93xx_wdt. | |
187 | ||
7768a13c KS |
188 | config OMAP_WATCHDOG |
189 | tristate "OMAP Watchdog" | |
b7cfc9ca | 190 | depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX |
7768a13c | 191 | help |
b7cfc9ca RK |
192 | Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog. Say 'Y' |
193 | here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer. | |
7768a13c | 194 | |
9325fa36 VW |
195 | config PNX4008_WATCHDOG |
196 | tristate "PNX4008 Watchdog" | |
261259b2 | 197 | depends on ARCH_PNX4008 |
9325fa36 VW |
198 | help |
199 | Say Y here if to include support for the watchdog timer | |
200 | in the PNX4008 processor. | |
201 | This driver can be built as a module by choosing M. The module | |
202 | will be called pnx4008_wdt. | |
203 | ||
204 | Say N if you are unsure. | |
205 | ||
70c14ff0 DW |
206 | config IOP_WATCHDOG |
207 | tristate "IOP Watchdog" | |
c0e962f9 | 208 | depends on PLAT_IOP |
70c14ff0 DW |
209 | select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X) |
210 | help | |
211 | Say Y here if to include support for the watchdog timer | |
212 | in the Intel IOP3XX & IOP13XX I/O Processors. This driver can | |
213 | be built as a module by choosing M. The module will | |
214 | be called iop_wdt. | |
215 | ||
216 | Note: The IOP13XX watchdog does an Internal Bus Reset which will | |
217 | affect both cores and the peripherals of the IOP. The ATU-X | |
218 | and/or ATUe configuration registers will remain intact, but if | |
219 | operating as an Root Complex and/or Central Resource, the PCI-X | |
220 | and/or PCIe busses will also be reset. THIS IS A VERY BIG HAMMER. | |
221 | ||
7d831bf5 VB |
222 | config DAVINCI_WATCHDOG |
223 | tristate "DaVinci watchdog" | |
c0e962f9 | 224 | depends on ARCH_DAVINCI |
7d831bf5 VB |
225 | help |
226 | Say Y here if to include support for the watchdog timer | |
227 | in the DaVinci DM644x/DM646x processors. | |
228 | To compile this driver as a module, choose M here: the | |
229 | module will be called davinci_wdt. | |
230 | ||
231 | NOTE: once enabled, this timer cannot be disabled. | |
232 | Say N if you are unsure. | |
233 | ||
3b937a7d NP |
234 | config ORION_WATCHDOG |
235 | tristate "Orion watchdog" | |
054bd3f0 | 236 | depends on ARCH_ORION5X || ARCH_KIRKWOOD |
22ac9232 SB |
237 | help |
238 | Say Y here if to include support for the watchdog timer | |
3b937a7d | 239 | in the Marvell Orion5x and Kirkwood ARM SoCs. |
22ac9232 | 240 | To compile this driver as a module, choose M here: the |
3b937a7d | 241 | module will be called orion_wdt. |
22ac9232 | 242 | |
01480701 LW |
243 | config COH901327_WATCHDOG |
244 | bool "ST-Ericsson COH 901 327 watchdog" | |
245 | depends on ARCH_U300 | |
246 | default y if MACH_U300 | |
247 | help | |
248 | Say Y here to include Watchdog timer support for the | |
249 | watchdog embedded into the ST-Ericsson U300 series platforms. | |
250 | This watchdog is used to reset the system and thus cannot be | |
251 | compiled as a module. | |
252 | ||
a9cb3959 HCE |
253 | # AVR32 Architecture |
254 | ||
255 | config AT32AP700X_WDT | |
256 | tristate "AT32AP700x watchdog" | |
438ff3f3 | 257 | depends on CPU_AT32AP700X |
a9cb3959 HCE |
258 | help |
259 | Watchdog timer embedded into AT32AP700x devices. This will reboot | |
260 | your system when the timeout is reached. | |
261 | ||
c0e962f9 | 262 | # BLACKFIN Architecture |
1e6d320f BW |
263 | |
264 | config BFIN_WDT | |
265 | tristate "Blackfin On-Chip Watchdog Timer" | |
c0e962f9 | 266 | depends on BLACKFIN |
1e6d320f BW |
267 | ---help--- |
268 | If you say yes here you will get support for the Blackfin On-Chip | |
269 | Watchdog Timer. If you have one of these processors and wish to | |
270 | have watchdog support enabled, say Y, otherwise say N. | |
271 | ||
272 | To compile this driver as a module, choose M here: the | |
273 | module will be called bfin_wdt. | |
274 | ||
c0e962f9 WVS |
275 | # CRIS Architecture |
276 | ||
277 | # FRV Architecture | |
278 | ||
279 | # H8300 Architecture | |
280 | ||
1da177e4 LT |
281 | # X86 (i386 + ia64 + x86_64) Architecture |
282 | ||
283 | config ACQUIRE_WDT | |
284 | tristate "Acquire SBC Watchdog Timer" | |
261259b2 | 285 | depends on X86 |
1da177e4 LT |
286 | ---help--- |
287 | This is the driver for the hardware watchdog on Single Board | |
288 | Computers produced by Acquire Inc (and others). This watchdog | |
289 | simply watches your kernel to make sure it doesn't freeze, and if | |
290 | it does, it reboots your computer after a certain amount of time. | |
291 | ||
292 | To compile this driver as a module, choose M here: the | |
293 | module will be called acquirewdt. | |
294 | ||
295 | Most people will say N. | |
296 | ||
297 | config ADVANTECH_WDT | |
298 | tristate "Advantech SBC Watchdog Timer" | |
261259b2 | 299 | depends on X86 |
1da177e4 LT |
300 | help |
301 | If you are configuring a Linux kernel for the Advantech single-board | |
302 | computer, say `Y' here to support its built-in watchdog timer | |
303 | feature. More information can be found at | |
304 | <http://www.advantech.com.tw/products/> | |
305 | ||
306 | config ALIM1535_WDT | |
307 | tristate "ALi M1535 PMU Watchdog Timer" | |
261259b2 | 308 | depends on X86 && PCI |
1da177e4 LT |
309 | ---help--- |
310 | This is the driver for the hardware watchdog on the ALi M1535 PMU. | |
311 | ||
312 | To compile this driver as a module, choose M here: the | |
313 | module will be called alim1535_wdt. | |
314 | ||
315 | Most people will say N. | |
316 | ||
317 | config ALIM7101_WDT | |
318 | tristate "ALi M7101 PMU Computer Watchdog" | |
bdd87354 | 319 | depends on PCI |
1da177e4 LT |
320 | help |
321 | This is the driver for the hardware watchdog on the ALi M7101 PMU | |
bdd87354 AC |
322 | as used in the x86 Cobalt servers and also found in some |
323 | SPARC Netra servers too. | |
1da177e4 LT |
324 | |
325 | To compile this driver as a module, choose M here: the | |
326 | module will be called alim7101_wdt. | |
327 | ||
328 | Most people will say N. | |
329 | ||
0b36086b JC |
330 | config GEODE_WDT |
331 | tristate "AMD Geode CS5535/CS5536 Watchdog" | |
332 | depends on MGEODE_LX | |
333 | help | |
334 | This driver enables a watchdog capability built into the | |
335 | CS5535/CS5536 companion chips for the AMD Geode GX and LX | |
336 | processors. This watchdog watches your kernel to make sure | |
337 | it doesn't freeze, and if it does, it reboots your computer after | |
338 | a certain amount of time. | |
339 | ||
340 | You can compile this driver directly into the kernel, or use | |
341 | it as a module. The module will be called geodewdt. | |
342 | ||
1da177e4 LT |
343 | config SC520_WDT |
344 | tristate "AMD Elan SC520 processor Watchdog" | |
261259b2 | 345 | depends on X86 |
1da177e4 LT |
346 | help |
347 | This is the driver for the hardware watchdog built in to the | |
348 | AMD "Elan" SC520 microcomputer commonly used in embedded systems. | |
349 | This watchdog simply watches your kernel to make sure it doesn't | |
350 | freeze, and if it does, it reboots your computer after a certain | |
351 | amount of time. | |
352 | ||
353 | You can compile this driver directly into the kernel, or use | |
354 | it as a module. The module will be called sc520_wdt. | |
355 | ||
356 | config EUROTECH_WDT | |
357 | tristate "Eurotech CPU-1220/1410 Watchdog Timer" | |
261259b2 | 358 | depends on X86 |
1da177e4 LT |
359 | help |
360 | Enable support for the watchdog timer on the Eurotech CPU-1220 and | |
361 | CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product | |
362 | information are at <http://www.eurotech.it/>. | |
363 | ||
364 | config IB700_WDT | |
365 | tristate "IB700 SBC Watchdog Timer" | |
261259b2 | 366 | depends on X86 |
1da177e4 LT |
367 | ---help--- |
368 | This is the driver for the hardware watchdog on the IB700 Single | |
369 | Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog | |
370 | simply watches your kernel to make sure it doesn't freeze, and if | |
371 | it does, it reboots your computer after a certain amount of time. | |
372 | ||
373 | This driver is like the WDT501 driver but for slightly different hardware. | |
374 | ||
375 | To compile this driver as a module, choose M here: the | |
376 | module will be called ib700wdt. | |
377 | ||
378 | Most people will say N. | |
379 | ||
d532134d | 380 | config IBMASR |
c310e2b9 | 381 | tristate "IBM Automatic Server Restart" |
261259b2 | 382 | depends on X86 |
c310e2b9 | 383 | help |
d532134d | 384 | This is the driver for the IBM Automatic Server Restart watchdog |
e0845bf4 | 385 | timer built-in into some eServer xSeries machines. |
d532134d AP |
386 | |
387 | To compile this driver as a module, choose M here: the | |
388 | module will be called ibmasr. | |
389 | ||
1da177e4 | 390 | config WAFER_WDT |
01ed08c1 | 391 | tristate "ICP Single Board Computer Watchdog Timer" |
261259b2 | 392 | depends on X86 |
1da177e4 | 393 | help |
01ed08c1 VS |
394 | This is a driver for the hardware watchdog on the ICP Single |
395 | Board Computer. This driver is working on (at least) the following | |
396 | IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782. | |
1da177e4 LT |
397 | |
398 | To compile this driver as a module, choose M here: the | |
399 | module will be called wafer5823wdt. | |
400 | ||
cc90ef0f DH |
401 | config I6300ESB_WDT |
402 | tristate "Intel 6300ESB Timer/Watchdog" | |
261259b2 | 403 | depends on X86 && PCI |
cc90ef0f DH |
404 | ---help--- |
405 | Hardware driver for the watchdog timer built into the Intel | |
406 | 6300ESB controller hub. | |
407 | ||
408 | To compile this driver as a module, choose M here: the | |
409 | module will be called i6300esb. | |
410 | ||
9e0ea345 | 411 | config ITCO_WDT |
cbf40d3f | 412 | tristate "Intel TCO Timer/Watchdog" |
261259b2 | 413 | depends on (X86 || IA64) && PCI |
9e0ea345 WVS |
414 | ---help--- |
415 | Hardware driver for the intel TCO timer based watchdog devices. | |
416 | These drivers are included in the Intel 82801 I/O Controller | |
12d60e28 | 417 | Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB |
9e0ea345 WVS |
418 | controller hub. |
419 | ||
420 | The TCO (Total Cost of Ownership) timer is a watchdog timer | |
421 | that will reboot the machine after its second expiration. The | |
422 | expiration time can be configured with the "heartbeat" parameter. | |
423 | ||
424 | On some motherboards the driver may fail to reset the chipset's | |
425 | NO_REBOOT flag which prevents the watchdog from rebooting the | |
426 | machine. If this is the case you will get a kernel message like | |
427 | "failed to reset NO_REBOOT flag, reboot disabled by hardware". | |
428 | ||
429 | To compile this driver as a module, choose M here: the | |
430 | module will be called iTCO_wdt. | |
431 | ||
e033351d WVS |
432 | config ITCO_VENDOR_SUPPORT |
433 | bool "Intel TCO Timer/Watchdog Specific Vendor Support" | |
434 | depends on ITCO_WDT | |
435 | ---help--- | |
436 | Add vendor specific support to the intel TCO timer based watchdog | |
437 | devices. At this moment we only have additional support for some | |
438 | SuperMicro Inc. motherboards. | |
439 | ||
38ff6fd2 JBD |
440 | config IT8712F_WDT |
441 | tristate "IT8712F (Smart Guardian) Watchdog Timer" | |
442 | depends on X86 | |
443 | ---help--- | |
444 | This is the driver for the built-in watchdog timer on the IT8712F | |
445 | Super I/0 chipset used on many motherboards. | |
446 | ||
447 | To compile this driver as a module, choose M here: the | |
448 | module will be called it8712f_wdt. | |
449 | ||
e1fee94f OS |
450 | config IT87_WDT |
451 | tristate "IT87 Watchdog Timer" | |
452 | depends on X86 && EXPERIMENTAL | |
453 | ---help--- | |
454 | This is the driver for the hardware watchdog on the ITE IT8716, | |
455 | IT8718, IT8726, IT8712(Version J,K) Super I/O chips. This watchdog | |
456 | simply watches your kernel to make sure it doesn't freeze, and if | |
457 | it does, it reboots your computer after a certain amount of time. | |
458 | ||
459 | To compile this driver as a module, choose M here: the module will | |
460 | be called it87_wdt. | |
461 | ||
7f4da474 TM |
462 | config HP_WATCHDOG |
463 | tristate "HP Proliant iLO 2 Hardware Watchdog Timer" | |
464 | depends on X86 | |
465 | help | |
466 | A software monitoring watchdog and NMI sourcing driver. This driver | |
467 | will detect lockups and provide stack trace. Also, when an NMI | |
468 | occurs this driver will make the necessary BIOS calls to log | |
469 | the cause of the NMI. This is a driver that will only load on a | |
470 | HP ProLiant system with a minimum of iLO2 support. | |
471 | To compile this driver as a module, choose M here: the | |
472 | module will be called hpwdt. | |
473 | ||
1da177e4 LT |
474 | config SC1200_WDT |
475 | tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" | |
261259b2 | 476 | depends on X86 |
1da177e4 LT |
477 | help |
478 | This is a driver for National Semiconductor PC87307/PC97307 hardware | |
479 | watchdog cards as found on the SC1200. This watchdog is mainly used | |
480 | for power management purposes and can be used to power down the device | |
481 | during inactivity periods (includes interrupt activity monitoring). | |
482 | ||
483 | To compile this driver as a module, choose M here: the | |
484 | module will be called sc1200wdt. | |
485 | ||
486 | Most people will say N. | |
487 | ||
488 | config SCx200_WDT | |
489 | tristate "National Semiconductor SCx200 Watchdog" | |
261259b2 | 490 | depends on SCx200 && PCI |
1da177e4 LT |
491 | help |
492 | Enable the built-in watchdog timer support on the National | |
493 | Semiconductor SCx200 processors. | |
494 | ||
495 | If compiled as a module, it will be called scx200_wdt. | |
496 | ||
789fc0ad SAMJ |
497 | config PC87413_WDT |
498 | tristate "NS PC87413 watchdog" | |
261259b2 | 499 | depends on X86 |
789fc0ad SAMJ |
500 | ---help--- |
501 | This is the driver for the hardware watchdog on the PC87413 chipset | |
502 | This watchdog simply watches your kernel to make sure it doesn't | |
503 | freeze, and if it does, it reboots your computer after a certain | |
504 | amount of time. | |
505 | ||
506 | To compile this driver as a module, choose M here: the | |
507 | module will be called pc87413_wdt. | |
508 | ||
509 | Most people will say N. | |
7944d3a5 | 510 | |
b3e8f2c1 FF |
511 | config RDC321X_WDT |
512 | tristate "RDC R-321x SoC watchdog" | |
513 | depends on X86_RDC321X | |
514 | help | |
515 | This is the driver for the built in hardware watchdog | |
516 | in the RDC R-321x SoC. | |
517 | ||
518 | To compile this driver as a module, choose M here: the | |
519 | module will be called rdc321x_wdt. | |
520 | ||
1da177e4 LT |
521 | config 60XX_WDT |
522 | tristate "SBC-60XX Watchdog Timer" | |
261259b2 | 523 | depends on X86 |
1da177e4 LT |
524 | help |
525 | This driver can be used with the watchdog timer found on some | |
526 | single board computers, namely the 6010 PII based computer. | |
527 | It may well work with other cards. It reads port 0x443 to enable | |
528 | and re-set the watchdog timer, and reads port 0x45 to disable | |
529 | the watchdog. If you have a card that behave in similar ways, | |
530 | you can probably make this driver work with your card as well. | |
531 | ||
532 | You can compile this driver directly into the kernel, or use | |
533 | it as a module. The module will be called sbc60xxwdt. | |
534 | ||
3809ad38 IM |
535 | config SBC8360_WDT |
536 | tristate "SBC8360 Watchdog Timer" | |
261259b2 | 537 | depends on X86 |
3809ad38 IM |
538 | ---help--- |
539 | ||
540 | This is the driver for the hardware watchdog on the SBC8360 Single | |
541 | Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com). | |
542 | ||
543 | To compile this driver as a module, choose M here: the | |
4737f097 | 544 | module will be called sbc8360. |
3809ad38 IM |
545 | |
546 | Most people will say N. | |
547 | ||
c4c28335 GG |
548 | config SBC7240_WDT |
549 | tristate "SBC Nano 7240 Watchdog Timer" | |
550 | depends on X86_32 | |
551 | ---help--- | |
552 | This is the driver for the hardware watchdog found on the IEI | |
553 | single board computers EPIC Nano 7240 (and likely others). This | |
554 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
555 | and if it does, it reboots your computer after a certain amount of | |
556 | time. | |
557 | ||
558 | To compile this driver as a module, choose M here: the | |
559 | module will be called sbc7240_wdt. | |
560 | ||
1da177e4 LT |
561 | config CPU5_WDT |
562 | tristate "SMA CPU5 Watchdog" | |
261259b2 | 563 | depends on X86 |
1da177e4 LT |
564 | ---help--- |
565 | TBD. | |
566 | To compile this driver as a module, choose M here: the | |
567 | module will be called cpu5wdt. | |
568 | ||
4c6e63bd WVS |
569 | config SMSC_SCH311X_WDT |
570 | tristate "SMSC SCH311X Watchdog Timer" | |
571 | depends on X86 | |
572 | ---help--- | |
573 | This is the driver for the hardware watchdog timer on the | |
574 | SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset | |
575 | (LPC IO with 8042 KBC, Reset Generation, HWM and multiple | |
576 | serial ports). | |
577 | ||
578 | To compile this driver as a module, choose M here: the | |
579 | module will be called sch311x_wdt. | |
580 | ||
485ae77d SA |
581 | config SMSC37B787_WDT |
582 | tristate "Winbond SMsC37B787 Watchdog Timer" | |
261259b2 | 583 | depends on X86 |
485ae77d SA |
584 | ---help--- |
585 | This is the driver for the hardware watchdog component on the | |
586 | Winbond SMsC37B787 chipset as used on the NetRunner Mainboard | |
587 | from Vision Systems and maybe others. | |
588 | ||
589 | This watchdog simply watches your kernel to make sure it doesn't | |
590 | freeze, and if it does, it reboots your computer after a certain | |
591 | amount of time. | |
592 | ||
593 | Usually a userspace daemon will notify the kernel WDT driver that | |
594 | userspace is still alive, at regular intervals. | |
595 | ||
596 | To compile this driver as a module, choose M here: the | |
597 | module will be called smsc37b787_wdt. | |
598 | ||
599 | Most people will say N. | |
600 | ||
1da177e4 LT |
601 | config W83627HF_WDT |
602 | tristate "W83627HF Watchdog Timer" | |
261259b2 | 603 | depends on X86 |
1da177e4 LT |
604 | ---help--- |
605 | This is the driver for the hardware watchdog on the W83627HF chipset | |
606 | as used in Advantech PC-9578 and Tyan S2721-533 motherboards | |
607 | (and likely others). This watchdog simply watches your kernel to | |
608 | make sure it doesn't freeze, and if it does, it reboots your computer | |
609 | after a certain amount of time. | |
610 | ||
611 | To compile this driver as a module, choose M here: the | |
612 | module will be called w83627hf_wdt. | |
613 | ||
614 | Most people will say N. | |
615 | ||
f9a8c891 | 616 | config W83697HF_WDT |
ff02cfc7 | 617 | tristate "W83697HF/W83697HG Watchdog Timer" |
261259b2 | 618 | depends on X86 |
e0845bf4 | 619 | ---help--- |
ff02cfc7 ST |
620 | This is the driver for the hardware watchdog on the W83697HF/HG |
621 | chipset as used in Dedibox/VIA motherboards (and likely others). | |
622 | This watchdog simply watches your kernel to make sure it doesn't | |
623 | freeze, and if it does, it reboots your computer after a certain | |
624 | amount of time. | |
f9a8c891 | 625 | |
e0845bf4 WVS |
626 | To compile this driver as a module, choose M here: the |
627 | module will be called w83697hf_wdt. | |
f9a8c891 | 628 | |
e0845bf4 | 629 | Most people will say N. |
f9a8c891 | 630 | |
7d8b0906 FF |
631 | config W83697UG_WDT |
632 | tristate "W83697UG/W83697UF Watchdog Timer" | |
633 | depends on X86 | |
634 | ---help--- | |
635 | This is the driver for the hardware watchdog on the W83697UG/UF | |
636 | chipset as used in MSI Fuzzy CX700 VIA motherboards (and likely others). | |
637 | This watchdog simply watches your kernel to make sure it doesn't | |
638 | freeze, and if it does, it reboots your computer after a certain | |
639 | amount of time. | |
640 | ||
641 | To compile this driver as a module, choose M here: the | |
642 | module will be called w83697ug_wdt. | |
643 | ||
644 | Most people will say N. | |
645 | ||
1da177e4 LT |
646 | config W83877F_WDT |
647 | tristate "W83877F (EMACS) Watchdog Timer" | |
261259b2 | 648 | depends on X86 |
1da177e4 LT |
649 | ---help--- |
650 | This is the driver for the hardware watchdog on the W83877F chipset | |
651 | as used in EMACS PC-104 motherboards (and likely others). This | |
652 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
653 | and if it does, it reboots your computer after a certain amount of | |
654 | time. | |
655 | ||
656 | To compile this driver as a module, choose M here: the | |
657 | module will be called w83877f_wdt. | |
658 | ||
659 | Most people will say N. | |
660 | ||
b4cc4aa2 JMG |
661 | config W83977F_WDT |
662 | tristate "W83977F (PCM-5335) Watchdog Timer" | |
261259b2 | 663 | depends on X86 |
b4cc4aa2 JMG |
664 | ---help--- |
665 | This is the driver for the hardware watchdog on the W83977F I/O chip | |
666 | as used in AAEON's PCM-5335 SBC (and likely others). This | |
667 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
668 | and if it does, it reboots your computer after a certain amount of | |
669 | time. | |
670 | ||
671 | To compile this driver as a module, choose M here: the | |
672 | module will be called w83977f_wdt. | |
673 | ||
1da177e4 LT |
674 | config MACHZ_WDT |
675 | tristate "ZF MachZ Watchdog" | |
261259b2 | 676 | depends on X86 |
1da177e4 LT |
677 | ---help--- |
678 | If you are using a ZF Micro MachZ processor, say Y here, otherwise | |
e0845bf4 | 679 | N. This is the driver for the watchdog timer built-in on that |
1da177e4 LT |
680 | processor using ZF-Logic interface. This watchdog simply watches |
681 | your kernel to make sure it doesn't freeze, and if it does, it | |
682 | reboots your computer after a certain amount of time. | |
683 | ||
684 | To compile this driver as a module, choose M here: the | |
685 | module will be called machzwd. | |
686 | ||
eed6565f CC |
687 | config SBC_EPX_C3_WATCHDOG |
688 | tristate "Winsystems SBC EPX-C3 watchdog" | |
261259b2 | 689 | depends on X86 |
eed6565f CC |
690 | ---help--- |
691 | This is the driver for the built-in watchdog timer on the EPX-C3 | |
692 | Single-board computer made by Winsystems, Inc. | |
693 | ||
694 | *Note*: This hardware watchdog is not probeable and thus there | |
695 | is no way to know if writing to its IO address will corrupt | |
696 | your system or have any real effect. The only way to be sure | |
697 | that this driver does what you want is to make sure you | |
2621e2a1 | 698 | are running it on an EPX-C3 from Winsystems with the watchdog |
eed6565f CC |
699 | timer at IO address 0x1ee and 0x1ef. It will write to both those |
700 | IO ports. Basically, the assumption is made that if you compile | |
701 | this driver into your kernel and/or load it as a module, that you | |
702 | know what you are doing and that you are in fact running on an | |
703 | EPX-C3 board! | |
704 | ||
705 | To compile this driver as a module, choose M here: the | |
706 | module will be called sbc_epx_c3. | |
707 | ||
c0e962f9 | 708 | # M32R Architecture |
1da177e4 | 709 | |
c0e962f9 WVS |
710 | # M68K Architecture |
711 | ||
712 | # M68KNOMMU Architecture | |
713 | ||
714 | # MIPS Architecture | |
715 | ||
03ec5856 FF |
716 | config RC32434_WDT |
717 | tristate "IDT RC32434 SoC Watchdog Timer" | |
718 | depends on MIKROTIK_RB532 | |
719 | help | |
720 | Hardware driver for the IDT RC32434 SoC built-in | |
721 | watchdog timer. | |
722 | ||
723 | To compile this driver as a module, choose M here: the | |
724 | module will be called rc32434_wdt. | |
725 | ||
c0e962f9 WVS |
726 | config INDYDOG |
727 | tristate "Indy/I2 Hardware Watchdog" | |
1ceea824 | 728 | depends on SGI_HAS_INDYDOG |
c0e962f9 WVS |
729 | help |
730 | Hardware driver for the Indy's/I2's watchdog. This is a | |
731 | watchdog timer that will reboot the machine after a 60 second | |
732 | timer expired and no process has written to /dev/watchdog during | |
733 | that time. | |
734 | ||
735 | config WDT_MTX1 | |
736 | tristate "MTX-1 Hardware Watchdog" | |
737 | depends on MIPS_MTX1 | |
738 | help | |
739 | Hardware driver for the MTX-1 boards. This is a watchdog timer that | |
740 | will reboot the machine after a 100 seconds timer expired. | |
741 | ||
33c050c5 DL |
742 | config PNX833X_WDT |
743 | tristate "PNX833x Hardware Watchdog" | |
744 | depends on SOC_PNX8335 | |
745 | help | |
746 | Hardware driver for the PNX833x's watchdog. This is a | |
747 | watchdog timer that will reboot the machine after a programable | |
748 | timer has expired and no process has written to /dev/watchdog during | |
749 | that time. | |
750 | ||
c0e962f9 WVS |
751 | config WDT_RM9K_GPI |
752 | tristate "RM9000/GPI hardware watchdog" | |
753 | depends on CPU_RM9000 | |
754 | help | |
755 | Watchdog implementation using the GPI hardware found on | |
756 | PMC-Sierra RM9xxx CPUs. | |
757 | ||
758 | To compile this driver as a module, choose M here: the | |
759 | module will be called rm9k_wdt. | |
760 | ||
75c752e6 AS |
761 | config SIBYTE_WDOG |
762 | tristate "Sibyte SoC hardware watchdog" | |
763 | depends on CPU_SB1 | |
764 | help | |
765 | Watchdog driver for the built in watchdog hardware in Sibyte | |
766 | SoC processors. There are apparently two watchdog timers | |
767 | on such processors; this driver supports only the first one, | |
768 | because currently Linux only supports exporting one watchdog | |
769 | to userspace. | |
770 | ||
771 | To compile this driver as a loadable module, choose M here. | |
772 | The module will be called sb_wdog. | |
773 | ||
c283cf2c MC |
774 | config AR7_WDT |
775 | tristate "TI AR7 Watchdog Timer" | |
776 | depends on AR7 | |
777 | help | |
778 | Hardware driver for the TI AR7 Watchdog Timer. | |
779 | ||
6f702fce AN |
780 | config TXX9_WDT |
781 | tristate "Toshiba TXx9 Watchdog Timer" | |
782 | depends on CPU_TX39XX || CPU_TX49XX | |
783 | help | |
784 | Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. | |
785 | ||
c0e962f9 WVS |
786 | # PARISC Architecture |
787 | ||
788 | # POWERPC Architecture | |
1da177e4 | 789 | |
3268b561 MW |
790 | config GEF_WDT |
791 | tristate "GE Fanuc Watchdog Timer" | |
740d36ae | 792 | depends on GEF_SBC610 || GEF_SBC310 || GEF_PPC9A |
3268b561 MW |
793 | ---help--- |
794 | Watchdog timer found in a number of GE Fanuc single board computers. | |
795 | ||
8cf18971 DP |
796 | config MPC5200_WDT |
797 | tristate "MPC5200 Watchdog Timer" | |
798 | depends on PPC_MPC52xx | |
799 | ||
28acd02f AV |
800 | config 8xxx_WDT |
801 | tristate "MPC8xxx Platform Watchdog Timer" | |
0d7b1014 | 802 | depends on PPC_8xx || PPC_83xx || PPC_86xx |
28acd02f AV |
803 | help |
804 | This driver is for a SoC level watchdog that exists on some | |
805 | Freescale PowerPC processors. So far this driver supports: | |
0d7b1014 | 806 | - MPC8xx watchdogs |
28acd02f AV |
807 | - MPC83xx watchdogs |
808 | - MPC86xx watchdogs | |
809 | ||
810 | For BookE processors (MPC85xx) use the BOOKE_WDT driver instead. | |
fabbfb9e | 811 | |
3be10211 JC |
812 | config MV64X60_WDT |
813 | tristate "MV64X60 (Marvell Discovery) Watchdog Timer" | |
261259b2 | 814 | depends on MV64X60 |
3be10211 | 815 | |
618efba9 SM |
816 | config PIKA_WDT |
817 | tristate "PIKA FPGA Watchdog" | |
818 | depends on WARP | |
819 | default y | |
820 | help | |
821 | This enables the watchdog in the PIKA FPGA. Currently used on | |
822 | the Warp platform. | |
823 | ||
a2f40ccd | 824 | config BOOKE_WDT |
34f6d749 | 825 | bool "PowerPC Book-E Watchdog Timer" |
261259b2 | 826 | depends on BOOKE || 4xx |
39cdc4bf KG |
827 | ---help--- |
828 | Please see Documentation/watchdog/watchdog-api.txt for | |
829 | more information. | |
a2f40ccd | 830 | |
180536f8 WVS |
831 | # PPC64 Architecture |
832 | ||
833 | config WATCHDOG_RTAS | |
834 | tristate "RTAS watchdog" | |
261259b2 | 835 | depends on PPC_RTAS |
180536f8 WVS |
836 | help |
837 | This driver adds watchdog support for the RTAS watchdog. | |
838 | ||
c310e2b9 | 839 | To compile this driver as a module, choose M here. The module |
180536f8 WVS |
840 | will be called wdrtas. |
841 | ||
1da177e4 LT |
842 | # S390 Architecture |
843 | ||
844 | config ZVM_WATCHDOG | |
845 | tristate "z/VM Watchdog Timer" | |
261259b2 | 846 | depends on S390 |
1da177e4 LT |
847 | help |
848 | IBM s/390 and zSeries machines running under z/VM 5.1 or later | |
849 | provide a virtual watchdog timer to their guest that cause a | |
850 | user define Control Program command to be executed after a | |
851 | timeout. | |
852 | ||
853 | To compile this driver as a module, choose M here. The module | |
854 | will be called vmwatchdog. | |
855 | ||
c0e962f9 | 856 | # SUPERH (sh + sh64) Architecture |
1da177e4 LT |
857 | |
858 | config SH_WDT | |
859 | tristate "SuperH Watchdog" | |
d0afa579 | 860 | depends on SUPERH && (CPU_SH3 || CPU_SH4) |
1da177e4 LT |
861 | help |
862 | This driver adds watchdog support for the integrated watchdog in the | |
863 | SuperH processors. If you have one of these processors and wish | |
864 | to have watchdog support enabled, say Y, otherwise say N. | |
865 | ||
866 | As a side note, saying Y here will automatically boost HZ to 1000 | |
867 | so that the timer has a chance to clear the overflow counter. On | |
868 | slower systems (such as the SH-2 and SH-3) this will likely yield | |
869 | some performance issues. As such, the WDT should be avoided here | |
870 | unless it is absolutely necessary. | |
871 | ||
872 | To compile this driver as a module, choose M here: the | |
873 | module will be called shwdt. | |
874 | ||
f118420b PM |
875 | config SH_WDT_MMAP |
876 | bool "Allow mmap of SH WDT" | |
877 | default n | |
878 | depends on SH_WDT | |
879 | help | |
880 | If you say Y here, user applications will be able to mmap the | |
881 | WDT/CPG registers. | |
cbf40d3f | 882 | |
c0e962f9 WVS |
883 | # SPARC Architecture |
884 | ||
1da177e4 LT |
885 | # SPARC64 Architecture |
886 | ||
887 | config WATCHDOG_CP1XXX | |
888 | tristate "CP1XXX Hardware Watchdog support" | |
261259b2 | 889 | depends on SPARC64 && PCI |
1da177e4 LT |
890 | ---help--- |
891 | This is the driver for the hardware watchdog timers present on | |
892 | Sun Microsystems CompactPCI models CP1400 and CP1500. | |
893 | ||
894 | To compile this driver as a module, choose M here: the | |
895 | module will be called cpwatchdog. | |
896 | ||
897 | If you do not have a CompactPCI model CP1400 or CP1500, or | |
898 | another UltraSPARC-IIi-cEngine boardset with hardware watchdog, | |
899 | you should say N to this option. | |
900 | ||
901 | config WATCHDOG_RIO | |
902 | tristate "RIO Hardware Watchdog support" | |
261259b2 | 903 | depends on SPARC64 && PCI |
1da177e4 LT |
904 | help |
905 | Say Y here to support the hardware watchdog capability on Sun RIO | |
906 | machines. The watchdog timeout period is normally one minute but | |
907 | can be changed with a boot-time parameter. | |
908 | ||
c0e962f9 WVS |
909 | # XTENSA Architecture |
910 | ||
1da177e4 LT |
911 | # |
912 | # ISA-based Watchdog Cards | |
913 | # | |
914 | ||
915 | comment "ISA-based Watchdog Cards" | |
261259b2 | 916 | depends on ISA |
1da177e4 LT |
917 | |
918 | config PCWATCHDOG | |
919 | tristate "Berkshire Products ISA-PC Watchdog" | |
261259b2 | 920 | depends on ISA |
1da177e4 LT |
921 | ---help--- |
922 | This is the driver for the Berkshire Products ISA-PC Watchdog card. | |
923 | This card simply watches your kernel to make sure it doesn't freeze, | |
924 | and if it does, it reboots your computer after a certain amount of | |
925 | time. This driver is like the WDT501 driver but for different | |
926 | hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC | |
927 | watchdog cards can be ordered from <http://www.berkprod.com/>. | |
928 | ||
929 | To compile this driver as a module, choose M here: the | |
930 | module will be called pcwd. | |
931 | ||
932 | Most people will say N. | |
933 | ||
934 | config MIXCOMWD | |
935 | tristate "Mixcom Watchdog" | |
261259b2 | 936 | depends on ISA |
1da177e4 LT |
937 | ---help--- |
938 | This is a driver for the Mixcom hardware watchdog cards. This | |
939 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
940 | and if it does, it reboots your computer after a certain amount of | |
941 | time. | |
942 | ||
943 | To compile this driver as a module, choose M here: the | |
944 | module will be called mixcomwd. | |
945 | ||
946 | Most people will say N. | |
947 | ||
948 | config WDT | |
949 | tristate "WDT Watchdog timer" | |
261259b2 | 950 | depends on ISA |
1da177e4 LT |
951 | ---help--- |
952 | If you have a WDT500P or WDT501P watchdog board, say Y here, | |
953 | otherwise N. It is not possible to probe for this board, which means | |
954 | that you have to inform the kernel about the IO port and IRQ that | |
955 | is needed (you can do this via the io and irq parameters) | |
956 | ||
957 | To compile this driver as a module, choose M here: the | |
958 | module will be called wdt. | |
959 | ||
1da177e4 LT |
960 | # |
961 | # PCI-based Watchdog Cards | |
962 | # | |
963 | ||
964 | comment "PCI-based Watchdog Cards" | |
261259b2 | 965 | depends on PCI |
1da177e4 LT |
966 | |
967 | config PCIPCWATCHDOG | |
968 | tristate "Berkshire Products PCI-PC Watchdog" | |
261259b2 | 969 | depends on PCI |
1da177e4 LT |
970 | ---help--- |
971 | This is the driver for the Berkshire Products PCI-PC Watchdog card. | |
972 | This card simply watches your kernel to make sure it doesn't freeze, | |
973 | and if it does, it reboots your computer after a certain amount of | |
974 | time. The card can also monitor the internal temperature of the PC. | |
975 | More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>. | |
976 | ||
977 | To compile this driver as a module, choose M here: the | |
978 | module will be called pcwd_pci. | |
979 | ||
980 | Most people will say N. | |
981 | ||
982 | config WDTPCI | |
983 | tristate "PCI-WDT500/501 Watchdog timer" | |
261259b2 | 984 | depends on PCI |
1da177e4 LT |
985 | ---help--- |
986 | If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N. | |
987 | ||
988 | To compile this driver as a module, choose M here: the | |
989 | module will be called wdt_pci. | |
990 | ||
991 | config WDT_501_PCI | |
992 | bool "PCI-WDT501 features" | |
993 | depends on WDTPCI | |
994 | help | |
995 | Saying Y here and creating a character special file /dev/temperature | |
996 | with major number 10 and minor number 131 ("man mknod") will give | |
997 | you a thermometer inside your computer: reading from | |
998 | /dev/temperature yields one byte, the temperature in degrees | |
999 | Fahrenheit. This works only if you have a PCI-WDT501 watchdog board | |
1000 | installed. | |
1001 | ||
1002 | If you want to enable the Fan Tachometer on the PCI-WDT501, then you | |
1003 | can do this via the tachometer parameter. Only do this if you have a | |
1004 | fan tachometer actually set up. | |
1005 | ||
1006 | # | |
1007 | # USB-based Watchdog Cards | |
1008 | # | |
1009 | ||
1010 | comment "USB-based Watchdog Cards" | |
261259b2 | 1011 | depends on USB |
1da177e4 LT |
1012 | |
1013 | config USBPCWATCHDOG | |
1014 | tristate "Berkshire Products USB-PC Watchdog" | |
261259b2 | 1015 | depends on USB |
1da177e4 LT |
1016 | ---help--- |
1017 | This is the driver for the Berkshire Products USB-PC Watchdog card. | |
1018 | This card simply watches your kernel to make sure it doesn't freeze, | |
1019 | and if it does, it reboots your computer after a certain amount of | |
1020 | time. The card can also monitor the internal temperature of the PC. | |
1021 | More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>. | |
1022 | ||
1023 | To compile this driver as a module, choose M here: the | |
1024 | module will be called pcwd_usb. | |
1025 | ||
1026 | Most people will say N. | |
1027 | ||
261259b2 | 1028 | endif # WATCHDOG |