Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | # |
2 | # Watchdog device configuration | |
3 | # | |
4 | ||
261259b2 | 5 | menuconfig WATCHDOG |
1da177e4 LT |
6 | bool "Watchdog Timer Support" |
7 | ---help--- | |
8 | If you say Y here (and to one of the following options) and create a | |
9 | character special file /dev/watchdog with major number 10 and minor | |
10 | number 130 using mknod ("man mknod"), you will get a watchdog, i.e.: | |
11 | subsequently opening the file and then failing to write to it for | |
12 | longer than 1 minute will result in rebooting the machine. This | |
13 | could be useful for a networked machine that needs to come back | |
e0845bf4 | 14 | on-line as fast as possible after a lock-up. There's both a watchdog |
1da177e4 LT |
15 | implementation entirely in software (which can sometimes fail to |
16 | reboot the machine) and a driver for hardware watchdog boards, which | |
17 | are more robust and can also keep track of the temperature inside | |
e403149c DH |
18 | your computer. For details, read |
19 | <file:Documentation/watchdog/watchdog-api.txt> in the kernel source. | |
1da177e4 LT |
20 | |
21 | The watchdog is usually used together with the watchdog daemon | |
22 | which is available from | |
23 | <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can | |
24 | also monitor NFS connections and can reboot the machine when the process | |
25 | table is full. | |
26 | ||
27 | If unsure, say N. | |
28 | ||
261259b2 JE |
29 | if WATCHDOG |
30 | ||
43316044 WVS |
31 | config WATCHDOG_CORE |
32 | bool "WatchDog Timer Driver Core" | |
33 | ---help--- | |
34 | Say Y here if you want to use the new watchdog timer driver core. | |
35 | This driver provides a framework for all watchdog timer drivers | |
36 | and gives them the /dev/watchdog interface (and later also the | |
37 | sysfs interface). | |
38 | ||
1da177e4 LT |
39 | config WATCHDOG_NOWAYOUT |
40 | bool "Disable watchdog shutdown on close" | |
1da177e4 LT |
41 | help |
42 | The default watchdog behaviour (which you get if you say N here) is | |
43 | to stop the timer if the process managing it closes the file | |
44 | /dev/watchdog. It's always remotely possible that this process might | |
45 | get killed. If you say Y here, the watchdog cannot be stopped once | |
46 | it has been started. | |
47 | ||
48 | # | |
49 | # General Watchdog drivers | |
50 | # | |
51 | ||
52 | comment "Watchdog Device Drivers" | |
1da177e4 | 53 | |
2621e2a1 | 54 | # Architecture Independent |
1da177e4 LT |
55 | |
56 | config SOFT_WATCHDOG | |
57 | tristate "Software watchdog" | |
a5132caf | 58 | select WATCHDOG_CORE |
1da177e4 LT |
59 | help |
60 | A software monitoring watchdog. This will fail to reboot your system | |
61 | from some situations that the hardware watchdog will recover | |
62 | from. Equally it's a lot cheaper to install. | |
63 | ||
64 | To compile this driver as a module, choose M here: the | |
65 | module will be called softdog. | |
66 | ||
664a0d78 AJ |
67 | config DA9052_WATCHDOG |
68 | tristate "Dialog DA9052 Watchdog" | |
69 | depends on PMIC_DA9052 | |
70 | select WATCHDOG_CORE | |
71 | help | |
72 | Support for the watchdog in the DA9052 PMIC. Watchdog trigger | |
73 | cause system reset. | |
74 | ||
75 | Say Y here to include support for the DA9052 watchdog. | |
76 | Alternatively say M to compile the driver as a module, | |
77 | which will be called da9052_wdt. | |
78 | ||
502a0106 MB |
79 | config WM831X_WATCHDOG |
80 | tristate "WM831x watchdog" | |
81 | depends on MFD_WM831X | |
00411ee9 | 82 | select WATCHDOG_CORE |
502a0106 MB |
83 | help |
84 | Support for the watchdog in the WM831x AudioPlus PMICs. When | |
85 | the watchdog triggers the system will be reset. | |
86 | ||
006948ba MB |
87 | config WM8350_WATCHDOG |
88 | tristate "WM8350 watchdog" | |
89 | depends on MFD_WM8350 | |
2e51d90f | 90 | select WATCHDOG_CORE |
006948ba MB |
91 | help |
92 | Support for the watchdog in the WM8350 AudioPlus PMIC. When | |
93 | the watchdog triggers the system will be reset. | |
94 | ||
c0e962f9 WVS |
95 | # ALPHA Architecture |
96 | ||
1da177e4 LT |
97 | # ARM Architecture |
98 | ||
4a370278 VK |
99 | config ARM_SP805_WATCHDOG |
100 | tristate "ARM SP805 Watchdog" | |
101 | depends on ARM_AMBA | |
102 | help | |
103 | ARM Primecell SP805 Watchdog timer. This will reboot your system when | |
104 | the timeout is reached. | |
105 | ||
bdcff345 | 106 | config AT91RM9200_WATCHDOG |
853807fb | 107 | tristate "AT91RM9200 watchdog" |
261259b2 | 108 | depends on ARCH_AT91RM9200 |
853807fb AV |
109 | help |
110 | Watchdog timer embedded into AT91RM9200 chips. This will reboot your | |
111 | system when the timeout is reached. | |
112 | ||
e6bb42e3 | 113 | config AT91SAM9X_WATCHDOG |
f0e625c1 AV |
114 | tristate "AT91SAM9X / AT91CAP9 watchdog" |
115 | depends on ARCH_AT91 && !ARCH_AT91RM9200 | |
e6bb42e3 | 116 | help |
f0e625c1 AV |
117 | Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will |
118 | reboot your system when the timeout is reached. | |
e6bb42e3 | 119 | |
1da177e4 LT |
120 | config 21285_WATCHDOG |
121 | tristate "DC21285 watchdog" | |
261259b2 | 122 | depends on FOOTBRIDGE |
1da177e4 | 123 | help |
e0845bf4 | 124 | The Intel Footbridge chip contains a built-in watchdog circuit. Say Y |
1da177e4 LT |
125 | here if you wish to use this. Alternatively say M to compile the |
126 | driver as a module, which will be called wdt285. | |
127 | ||
128 | This driver does not work on all machines. In particular, early CATS | |
129 | boards have hardware problems that will cause the machine to simply | |
130 | lock up if the watchdog fires. | |
131 | ||
132 | "If in doubt, leave it out" - say N. | |
133 | ||
134 | config 977_WATCHDOG | |
135 | tristate "NetWinder WB83C977 watchdog" | |
261259b2 | 136 | depends on FOOTBRIDGE && ARCH_NETWINDER |
1da177e4 LT |
137 | help |
138 | Say Y here to include support for the WB977 watchdog included in | |
139 | NetWinder machines. Alternatively say M to compile the driver as | |
140 | a module, which will be called wdt977. | |
141 | ||
142 | Not sure? It's safe to say N. | |
143 | ||
144 | config IXP4XX_WATCHDOG | |
145 | tristate "IXP4xx Watchdog" | |
261259b2 | 146 | depends on ARCH_IXP4XX |
1da177e4 LT |
147 | help |
148 | Say Y here if to include support for the watchdog timer | |
149 | in the Intel IXP4xx network processors. This driver can | |
150 | be built as a module by choosing M. The module will | |
151 | be called ixp4xx_wdt. | |
152 | ||
153 | Note: The internal IXP4xx watchdog does a soft CPU reset | |
154 | which doesn't reset any peripherals. There are circumstances | |
155 | where the watchdog will fail to reset the board correctly | |
156 | (e.g., if the boot ROM is in an unreadable state). | |
157 | ||
158 | Say N if you are unsure. | |
159 | ||
ccb8f430 AV |
160 | config KS8695_WATCHDOG |
161 | tristate "KS8695 watchdog" | |
162 | depends on ARCH_KS8695 | |
163 | help | |
164 | Watchdog timer embedded into KS8695 processor. This will reboot your | |
165 | system when the timeout is reached. | |
166 | ||
8740f71d BG |
167 | config HAVE_S3C2410_WATCHDOG |
168 | bool | |
169 | help | |
170 | This will include watchdog timer support for Samsung SoCs. If | |
171 | you want to include watchdog support for any machine, kindly | |
172 | select this in the respective mach-XXXX/Kconfig file. | |
173 | ||
1da177e4 LT |
174 | config S3C2410_WATCHDOG |
175 | tristate "S3C2410 Watchdog" | |
b130d5c2 | 176 | depends on HAVE_S3C2410_WATCHDOG |
25dc46e3 | 177 | select WATCHDOG_CORE |
1da177e4 | 178 | help |
8740f71d BG |
179 | Watchdog timer block in the Samsung SoCs. This will reboot |
180 | the system when the timer expires with the watchdog enabled. | |
1da177e4 LT |
181 | |
182 | The driver is limited by the speed of the system's PCLK | |
2621e2a1 | 183 | signal, so with reasonably fast systems (PCLK around 50-66MHz) |
1da177e4 LT |
184 | then watchdog intervals of over approximately 20seconds are |
185 | unavailable. | |
186 | ||
187 | The driver can be built as a module by choosing M, and will | |
188 | be called s3c2410_wdt | |
189 | ||
190 | config SA1100_WATCHDOG | |
191 | tristate "SA1100/PXA2xx watchdog" | |
261259b2 | 192 | depends on ARCH_SA1100 || ARCH_PXA |
1da177e4 LT |
193 | help |
194 | Watchdog timer embedded into SA11x0 and PXA2xx chips. This will | |
195 | reboot your system when timeout is reached. | |
196 | ||
197 | NOTE: once enabled, this timer cannot be disabled. | |
198 | ||
199 | To compile this driver as a module, choose M here: the | |
200 | module will be called sa1100_wdt. | |
201 | ||
c9353ae1 JI |
202 | config DW_WATCHDOG |
203 | tristate "Synopsys DesignWare watchdog" | |
204 | depends on ARM && HAVE_CLK | |
205 | help | |
206 | Say Y here if to include support for the Synopsys DesignWare | |
207 | watchdog timer found in many ARM chips. | |
208 | To compile this driver as a module, choose M here: the | |
209 | module will be called dw_wdt. | |
210 | ||
b9d36b85 RK |
211 | config MPCORE_WATCHDOG |
212 | tristate "MPcore watchdog" | |
98af0570 | 213 | depends on HAVE_ARM_TWD |
b9d36b85 RK |
214 | help |
215 | Watchdog timer embedded into the MPcore system. | |
216 | ||
217 | To compile this driver as a module, choose M here: the | |
218 | module will be called mpcore_wdt. | |
219 | ||
f52ac8fe AZ |
220 | config EP93XX_WATCHDOG |
221 | tristate "EP93xx Watchdog" | |
261259b2 | 222 | depends on ARCH_EP93XX |
e12a679d | 223 | select WATCHDOG_CORE |
f52ac8fe AZ |
224 | help |
225 | Say Y here if to include support for the watchdog timer | |
226 | embedded in the Cirrus Logic EP93xx family of devices. | |
227 | ||
228 | To compile this driver as a module, choose M here: the | |
229 | module will be called ep93xx_wdt. | |
230 | ||
7768a13c KS |
231 | config OMAP_WATCHDOG |
232 | tristate "OMAP Watchdog" | |
77165a48 | 233 | depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS |
7768a13c | 234 | help |
77165a48 SS |
235 | Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog. Say 'Y' |
236 | here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer. | |
7768a13c | 237 | |
9325fa36 | 238 | config PNX4008_WATCHDOG |
0a18e155 KW |
239 | tristate "PNX4008 and LPC32XX Watchdog" |
240 | depends on ARCH_PNX4008 || ARCH_LPC32XX | |
6b1e8386 | 241 | select WATCHDOG_CORE |
9325fa36 VW |
242 | help |
243 | Say Y here if to include support for the watchdog timer | |
0a18e155 | 244 | in the PNX4008 or LPC32XX processor. |
9325fa36 VW |
245 | This driver can be built as a module by choosing M. The module |
246 | will be called pnx4008_wdt. | |
247 | ||
248 | Say N if you are unsure. | |
249 | ||
70c14ff0 DW |
250 | config IOP_WATCHDOG |
251 | tristate "IOP Watchdog" | |
c0e962f9 | 252 | depends on PLAT_IOP |
70c14ff0 DW |
253 | select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X) |
254 | help | |
255 | Say Y here if to include support for the watchdog timer | |
256 | in the Intel IOP3XX & IOP13XX I/O Processors. This driver can | |
257 | be built as a module by choosing M. The module will | |
258 | be called iop_wdt. | |
259 | ||
260 | Note: The IOP13XX watchdog does an Internal Bus Reset which will | |
261 | affect both cores and the peripherals of the IOP. The ATU-X | |
262 | and/or ATUe configuration registers will remain intact, but if | |
263 | operating as an Root Complex and/or Central Resource, the PCI-X | |
264 | and/or PCIe busses will also be reset. THIS IS A VERY BIG HAMMER. | |
265 | ||
7d831bf5 VB |
266 | config DAVINCI_WATCHDOG |
267 | tristate "DaVinci watchdog" | |
c0e962f9 | 268 | depends on ARCH_DAVINCI |
7d831bf5 VB |
269 | help |
270 | Say Y here if to include support for the watchdog timer | |
271 | in the DaVinci DM644x/DM646x processors. | |
272 | To compile this driver as a module, choose M here: the | |
273 | module will be called davinci_wdt. | |
274 | ||
275 | NOTE: once enabled, this timer cannot be disabled. | |
276 | Say N if you are unsure. | |
277 | ||
3b937a7d NP |
278 | config ORION_WATCHDOG |
279 | tristate "Orion watchdog" | |
054bd3f0 | 280 | depends on ARCH_ORION5X || ARCH_KIRKWOOD |
22ac9232 SB |
281 | help |
282 | Say Y here if to include support for the watchdog timer | |
3b937a7d | 283 | in the Marvell Orion5x and Kirkwood ARM SoCs. |
22ac9232 | 284 | To compile this driver as a module, choose M here: the |
3b937a7d | 285 | module will be called orion_wdt. |
22ac9232 | 286 | |
01480701 LW |
287 | config COH901327_WATCHDOG |
288 | bool "ST-Ericsson COH 901 327 watchdog" | |
289 | depends on ARCH_U300 | |
290 | default y if MACH_U300 | |
15b25701 | 291 | select WATCHDOG_CORE |
01480701 LW |
292 | help |
293 | Say Y here to include Watchdog timer support for the | |
294 | watchdog embedded into the ST-Ericsson U300 series platforms. | |
295 | This watchdog is used to reset the system and thus cannot be | |
296 | compiled as a module. | |
297 | ||
80e45b1e TK |
298 | config TWL4030_WATCHDOG |
299 | tristate "TWL4030 Watchdog" | |
300 | depends on TWL4030_CORE | |
301 | help | |
302 | Support for TI TWL4030 watchdog. Say 'Y' here to enable the | |
303 | watchdog timer support for TWL4030 chips. | |
304 | ||
accde168 | 305 | config STMP3XXX_WATCHDOG |
306 | tristate "Freescale STMP3XXX watchdog" | |
307 | depends on ARCH_STMP3XXX | |
308 | help | |
309 | Say Y here if to include support for the watchdog timer | |
310 | for the Sigmatel STMP37XX/378X SoC. | |
311 | To compile this driver as a module, choose M here: the | |
312 | module will be called stmp3xxx_wdt. | |
313 | ||
0400e313 WZ |
314 | config NUC900_WATCHDOG |
315 | tristate "Nuvoton NUC900 watchdog" | |
316 | depends on ARCH_W90X900 | |
317 | help | |
318 | Say Y here if to include support for the watchdog timer | |
319 | for the Nuvoton NUC900 series SoCs. | |
320 | To compile this driver as a module, choose M here: the | |
321 | module will be called nuc900_wdt. | |
322 | ||
c90bf2aa MW |
323 | config TS72XX_WATCHDOG |
324 | tristate "TS-72XX SBC Watchdog" | |
325 | depends on MACH_TS72XX | |
326 | help | |
327 | Technologic Systems TS-7200, TS-7250 and TS-7260 boards have | |
328 | watchdog timer implemented in a external CPLD chip. Say Y here | |
329 | if you want to support for the watchdog timer on TS-72XX boards. | |
330 | ||
331 | To compile this driver as a module, choose M here: the | |
332 | module will be called ts72xx_wdt. | |
333 | ||
5e803716 MZ |
334 | config MAX63XX_WATCHDOG |
335 | tristate "Max63xx watchdog" | |
aebaec97 | 336 | depends on ARM && HAS_IOMEM |
a0f36833 | 337 | select WATCHDOG_CORE |
5e803716 MZ |
338 | help |
339 | Support for memory mapped max63{69,70,71,72,73,74} watchdog timer. | |
340 | ||
bb2fd8a8 WS |
341 | config IMX2_WDT |
342 | tristate "IMX2+ Watchdog" | |
bfbc5e27 | 343 | depends on IMX_HAVE_PLATFORM_IMX2_WDT |
bb2fd8a8 WS |
344 | help |
345 | This is the driver for the hardware watchdog | |
346 | on the Freescale IMX2 and later processors. | |
347 | If you have one of these processors and wish to have | |
348 | watchdog support enabled, say Y, otherwise say N. | |
349 | ||
350 | To compile this driver as a module, choose M here: the | |
351 | module will be called imx2_wdt. | |
352 | ||
a9cb3959 HCE |
353 | # AVR32 Architecture |
354 | ||
355 | config AT32AP700X_WDT | |
356 | tristate "AT32AP700x watchdog" | |
438ff3f3 | 357 | depends on CPU_AT32AP700X |
a9cb3959 HCE |
358 | help |
359 | Watchdog timer embedded into AT32AP700x devices. This will reboot | |
360 | your system when the timeout is reached. | |
361 | ||
c0e962f9 | 362 | # BLACKFIN Architecture |
1e6d320f BW |
363 | |
364 | config BFIN_WDT | |
365 | tristate "Blackfin On-Chip Watchdog Timer" | |
c0e962f9 | 366 | depends on BLACKFIN |
1e6d320f BW |
367 | ---help--- |
368 | If you say yes here you will get support for the Blackfin On-Chip | |
369 | Watchdog Timer. If you have one of these processors and wish to | |
370 | have watchdog support enabled, say Y, otherwise say N. | |
371 | ||
372 | To compile this driver as a module, choose M here: the | |
373 | module will be called bfin_wdt. | |
374 | ||
c0e962f9 WVS |
375 | # CRIS Architecture |
376 | ||
377 | # FRV Architecture | |
378 | ||
379 | # H8300 Architecture | |
380 | ||
1da177e4 LT |
381 | # X86 (i386 + ia64 + x86_64) Architecture |
382 | ||
383 | config ACQUIRE_WDT | |
384 | tristate "Acquire SBC Watchdog Timer" | |
261259b2 | 385 | depends on X86 |
1da177e4 LT |
386 | ---help--- |
387 | This is the driver for the hardware watchdog on Single Board | |
388 | Computers produced by Acquire Inc (and others). This watchdog | |
389 | simply watches your kernel to make sure it doesn't freeze, and if | |
390 | it does, it reboots your computer after a certain amount of time. | |
391 | ||
392 | To compile this driver as a module, choose M here: the | |
393 | module will be called acquirewdt. | |
394 | ||
395 | Most people will say N. | |
396 | ||
397 | config ADVANTECH_WDT | |
398 | tristate "Advantech SBC Watchdog Timer" | |
261259b2 | 399 | depends on X86 |
1da177e4 LT |
400 | help |
401 | If you are configuring a Linux kernel for the Advantech single-board | |
402 | computer, say `Y' here to support its built-in watchdog timer | |
403 | feature. More information can be found at | |
404 | <http://www.advantech.com.tw/products/> | |
405 | ||
406 | config ALIM1535_WDT | |
407 | tristate "ALi M1535 PMU Watchdog Timer" | |
261259b2 | 408 | depends on X86 && PCI |
1da177e4 LT |
409 | ---help--- |
410 | This is the driver for the hardware watchdog on the ALi M1535 PMU. | |
411 | ||
412 | To compile this driver as a module, choose M here: the | |
413 | module will be called alim1535_wdt. | |
414 | ||
415 | Most people will say N. | |
416 | ||
417 | config ALIM7101_WDT | |
418 | tristate "ALi M7101 PMU Computer Watchdog" | |
bdd87354 | 419 | depends on PCI |
1da177e4 LT |
420 | help |
421 | This is the driver for the hardware watchdog on the ALi M7101 PMU | |
bdd87354 AC |
422 | as used in the x86 Cobalt servers and also found in some |
423 | SPARC Netra servers too. | |
1da177e4 LT |
424 | |
425 | To compile this driver as a module, choose M here: the | |
426 | module will be called alim7101_wdt. | |
427 | ||
428 | Most people will say N. | |
429 | ||
96cb4eb0 | 430 | config F71808E_WDT |
e13752a1 | 431 | tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog" |
96cb4eb0 GS |
432 | depends on X86 && EXPERIMENTAL |
433 | help | |
434 | This is the driver for the hardware watchdog on the Fintek | |
e13752a1 | 435 | F71808E, F71862FG, F71869, F71882FG and F71889FG Super I/O controllers. |
96cb4eb0 GS |
436 | |
437 | You can compile this driver directly into the kernel, or use | |
438 | it as a module. The module will be called f71808e_wdt. | |
439 | ||
15e28bf1 PG |
440 | config SP5100_TCO |
441 | tristate "AMD/ATI SP5100 TCO Timer/Watchdog" | |
442 | depends on X86 && PCI | |
443 | ---help--- | |
444 | Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO | |
445 | (Total Cost of Ownership) timer is a watchdog timer that will reboot | |
446 | the machine after its expiration. The expiration time can be | |
447 | configured with the "heartbeat" parameter. | |
448 | ||
449 | To compile this driver as a module, choose M here: the | |
450 | module will be called sp5100_tco. | |
96cb4eb0 | 451 | |
0b36086b JC |
452 | config GEODE_WDT |
453 | tristate "AMD Geode CS5535/CS5536 Watchdog" | |
9b0fd114 | 454 | depends on CS5535_MFGPT |
0b36086b JC |
455 | help |
456 | This driver enables a watchdog capability built into the | |
457 | CS5535/CS5536 companion chips for the AMD Geode GX and LX | |
458 | processors. This watchdog watches your kernel to make sure | |
459 | it doesn't freeze, and if it does, it reboots your computer after | |
460 | a certain amount of time. | |
461 | ||
462 | You can compile this driver directly into the kernel, or use | |
463 | it as a module. The module will be called geodewdt. | |
464 | ||
1da177e4 LT |
465 | config SC520_WDT |
466 | tristate "AMD Elan SC520 processor Watchdog" | |
261259b2 | 467 | depends on X86 |
1da177e4 LT |
468 | help |
469 | This is the driver for the hardware watchdog built in to the | |
470 | AMD "Elan" SC520 microcomputer commonly used in embedded systems. | |
471 | This watchdog simply watches your kernel to make sure it doesn't | |
472 | freeze, and if it does, it reboots your computer after a certain | |
473 | amount of time. | |
474 | ||
475 | You can compile this driver directly into the kernel, or use | |
476 | it as a module. The module will be called sc520_wdt. | |
477 | ||
3a5f9000 DT |
478 | config SBC_FITPC2_WATCHDOG |
479 | tristate "Compulab SBC-FITPC2 watchdog" | |
480 | depends on X86 | |
481 | ---help--- | |
ef39a1bf DT |
482 | This is the driver for the built-in watchdog timer on the fit-PC2, |
483 | fit-PC2i, CM-iAM single-board computers made by Compulab. | |
3a5f9000 DT |
484 | |
485 | It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux. | |
486 | When "Watchdog Timer Value" enabled one can set 31-255 s operational range. | |
487 | ||
488 | Entering BIOS setup temporary disables watchdog operation regardless to current state, | |
489 | so system will not be restarted while user in BIOS setup. | |
490 | ||
491 | Once watchdog was enabled the system will be restarted every | |
492 | "Watchdog Timer Value" period, so to prevent it user can restart or | |
493 | disable the watchdog. | |
494 | ||
495 | To compile this driver as a module, choose M here: the | |
496 | module will be called sbc_fitpc2_wdt. | |
497 | ||
498 | Most people will say N. | |
499 | ||
1da177e4 LT |
500 | config EUROTECH_WDT |
501 | tristate "Eurotech CPU-1220/1410 Watchdog Timer" | |
261259b2 | 502 | depends on X86 |
1da177e4 LT |
503 | help |
504 | Enable support for the watchdog timer on the Eurotech CPU-1220 and | |
505 | CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product | |
506 | information are at <http://www.eurotech.it/>. | |
507 | ||
508 | config IB700_WDT | |
509 | tristate "IB700 SBC Watchdog Timer" | |
261259b2 | 510 | depends on X86 |
1da177e4 LT |
511 | ---help--- |
512 | This is the driver for the hardware watchdog on the IB700 Single | |
513 | Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog | |
514 | simply watches your kernel to make sure it doesn't freeze, and if | |
515 | it does, it reboots your computer after a certain amount of time. | |
516 | ||
517 | This driver is like the WDT501 driver but for slightly different hardware. | |
518 | ||
519 | To compile this driver as a module, choose M here: the | |
520 | module will be called ib700wdt. | |
521 | ||
522 | Most people will say N. | |
523 | ||
d532134d | 524 | config IBMASR |
c310e2b9 | 525 | tristate "IBM Automatic Server Restart" |
261259b2 | 526 | depends on X86 |
c310e2b9 | 527 | help |
d532134d | 528 | This is the driver for the IBM Automatic Server Restart watchdog |
e0845bf4 | 529 | timer built-in into some eServer xSeries machines. |
d532134d AP |
530 | |
531 | To compile this driver as a module, choose M here: the | |
532 | module will be called ibmasr. | |
533 | ||
1da177e4 | 534 | config WAFER_WDT |
01ed08c1 | 535 | tristate "ICP Single Board Computer Watchdog Timer" |
261259b2 | 536 | depends on X86 |
1da177e4 | 537 | help |
01ed08c1 VS |
538 | This is a driver for the hardware watchdog on the ICP Single |
539 | Board Computer. This driver is working on (at least) the following | |
540 | IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782. | |
1da177e4 LT |
541 | |
542 | To compile this driver as a module, choose M here: the | |
543 | module will be called wafer5823wdt. | |
544 | ||
cc90ef0f DH |
545 | config I6300ESB_WDT |
546 | tristate "Intel 6300ESB Timer/Watchdog" | |
7050bd54 | 547 | depends on PCI |
cc90ef0f DH |
548 | ---help--- |
549 | Hardware driver for the watchdog timer built into the Intel | |
550 | 6300ESB controller hub. | |
551 | ||
552 | To compile this driver as a module, choose M here: the | |
553 | module will be called i6300esb. | |
554 | ||
101ce87b AS |
555 | config IE6XX_WDT |
556 | tristate "Intel Atom E6xx Watchdog" | |
557 | depends on X86 && PCI | |
558 | select WATCHDOG_CORE | |
559 | select MFD_CORE | |
560 | select LPC_SCH | |
561 | ---help--- | |
562 | Hardware driver for the watchdog timer built into the Intel | |
563 | Atom E6XX (TunnelCreek) processor. | |
564 | ||
565 | To compile this driver as a module, choose M here: the | |
566 | module will be called ie6xx_wdt. | |
567 | ||
57539c1c DJ |
568 | config INTEL_SCU_WATCHDOG |
569 | bool "Intel SCU Watchdog for Mobile Platforms" | |
e376fd66 | 570 | depends on X86_MRST |
57539c1c DJ |
571 | ---help--- |
572 | Hardware driver for the watchdog time built into the Intel SCU | |
573 | for Intel Mobile Platforms. | |
574 | ||
575 | To compile this driver as a module, choose M here. | |
576 | ||
9e0ea345 | 577 | config ITCO_WDT |
cbf40d3f | 578 | tristate "Intel TCO Timer/Watchdog" |
261259b2 | 579 | depends on (X86 || IA64) && PCI |
887c8ec7 | 580 | select LPC_ICH |
9e0ea345 WVS |
581 | ---help--- |
582 | Hardware driver for the intel TCO timer based watchdog devices. | |
583 | These drivers are included in the Intel 82801 I/O Controller | |
12d60e28 | 584 | Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB |
9e0ea345 WVS |
585 | controller hub. |
586 | ||
587 | The TCO (Total Cost of Ownership) timer is a watchdog timer | |
588 | that will reboot the machine after its second expiration. The | |
589 | expiration time can be configured with the "heartbeat" parameter. | |
590 | ||
591 | On some motherboards the driver may fail to reset the chipset's | |
592 | NO_REBOOT flag which prevents the watchdog from rebooting the | |
593 | machine. If this is the case you will get a kernel message like | |
594 | "failed to reset NO_REBOOT flag, reboot disabled by hardware". | |
595 | ||
596 | To compile this driver as a module, choose M here: the | |
597 | module will be called iTCO_wdt. | |
598 | ||
e033351d WVS |
599 | config ITCO_VENDOR_SUPPORT |
600 | bool "Intel TCO Timer/Watchdog Specific Vendor Support" | |
601 | depends on ITCO_WDT | |
602 | ---help--- | |
603 | Add vendor specific support to the intel TCO timer based watchdog | |
604 | devices. At this moment we only have additional support for some | |
605 | SuperMicro Inc. motherboards. | |
606 | ||
38ff6fd2 JBD |
607 | config IT8712F_WDT |
608 | tristate "IT8712F (Smart Guardian) Watchdog Timer" | |
609 | depends on X86 | |
610 | ---help--- | |
611 | This is the driver for the built-in watchdog timer on the IT8712F | |
612 | Super I/0 chipset used on many motherboards. | |
613 | ||
4fc36808 WVS |
614 | If the driver does not work, then make sure that the game port in |
615 | the BIOS is enabled. | |
616 | ||
38ff6fd2 JBD |
617 | To compile this driver as a module, choose M here: the |
618 | module will be called it8712f_wdt. | |
619 | ||
e1fee94f OS |
620 | config IT87_WDT |
621 | tristate "IT87 Watchdog Timer" | |
622 | depends on X86 && EXPERIMENTAL | |
623 | ---help--- | |
dfb0b8ea | 624 | This is the driver for the hardware watchdog on the ITE IT8702, |
198ca015 DEP |
625 | IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 and IT8728 |
626 | Super I/O chips. | |
627 | ||
628 | If the driver does not work, then make sure that the game port in | |
629 | the BIOS is enabled. | |
630 | ||
dfb0b8ea OZ |
631 | This watchdog simply watches your kernel to make sure it doesn't |
632 | freeze, and if it does, it reboots your computer after a certain | |
633 | amount of time. | |
e1fee94f OS |
634 | |
635 | To compile this driver as a module, choose M here: the module will | |
636 | be called it87_wdt. | |
637 | ||
7f4da474 | 638 | config HP_WATCHDOG |
ea6649c7 | 639 | tristate "HP ProLiant iLO2+ Hardware Watchdog Timer" |
f71d26bb | 640 | depends on X86 && PCI |
7f4da474 TM |
641 | help |
642 | A software monitoring watchdog and NMI sourcing driver. This driver | |
86ded1f3 | 643 | will detect lockups and provide a stack trace. This is a driver that |
ea6649c7 | 644 | will only load on an HP ProLiant system with a minimum of iLO2 support. |
86ded1f3 | 645 | To compile this driver as a module, choose M here: the module will be |
646 | called hpwdt. | |
647 | ||
648 | config HPWDT_NMI_DECODING | |
649 | bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer" | |
650 | depends on HP_WATCHDOG | |
a4616153 | 651 | default y |
86ded1f3 | 652 | help |
653 | When an NMI occurs this feature will make the necessary BIOS calls to | |
654 | log the cause of the NMI. | |
7f4da474 | 655 | |
1da177e4 LT |
656 | config SC1200_WDT |
657 | tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" | |
261259b2 | 658 | depends on X86 |
1da177e4 LT |
659 | help |
660 | This is a driver for National Semiconductor PC87307/PC97307 hardware | |
661 | watchdog cards as found on the SC1200. This watchdog is mainly used | |
662 | for power management purposes and can be used to power down the device | |
663 | during inactivity periods (includes interrupt activity monitoring). | |
664 | ||
665 | To compile this driver as a module, choose M here: the | |
666 | module will be called sc1200wdt. | |
667 | ||
668 | Most people will say N. | |
669 | ||
670 | config SCx200_WDT | |
671 | tristate "National Semiconductor SCx200 Watchdog" | |
261259b2 | 672 | depends on SCx200 && PCI |
1da177e4 LT |
673 | help |
674 | Enable the built-in watchdog timer support on the National | |
675 | Semiconductor SCx200 processors. | |
676 | ||
677 | If compiled as a module, it will be called scx200_wdt. | |
678 | ||
789fc0ad SAMJ |
679 | config PC87413_WDT |
680 | tristate "NS PC87413 watchdog" | |
261259b2 | 681 | depends on X86 |
789fc0ad SAMJ |
682 | ---help--- |
683 | This is the driver for the hardware watchdog on the PC87413 chipset | |
684 | This watchdog simply watches your kernel to make sure it doesn't | |
685 | freeze, and if it does, it reboots your computer after a certain | |
686 | amount of time. | |
687 | ||
688 | To compile this driver as a module, choose M here: the | |
689 | module will be called pc87413_wdt. | |
690 | ||
691 | Most people will say N. | |
7944d3a5 | 692 | |
456c7301 MW |
693 | config NV_TCO |
694 | tristate "nVidia TCO Timer/Watchdog" | |
695 | depends on X86 && PCI | |
696 | ---help--- | |
697 | Hardware driver for the TCO timer built into the nVidia Hub family | |
698 | (such as the MCP51). The TCO (Total Cost of Ownership) timer is a | |
699 | watchdog timer that will reboot the machine after its second | |
700 | expiration. The expiration time can be configured with the | |
701 | "heartbeat" parameter. | |
702 | ||
703 | On some motherboards the driver may fail to reset the chipset's | |
704 | NO_REBOOT flag which prevents the watchdog from rebooting the | |
705 | machine. If this is the case you will get a kernel message like | |
706 | "failed to reset NO_REBOOT flag, reboot disabled by hardware". | |
707 | ||
708 | To compile this driver as a module, choose M here: the | |
709 | module will be called nv_tco. | |
710 | ||
b3e8f2c1 FF |
711 | config RDC321X_WDT |
712 | tristate "RDC R-321x SoC watchdog" | |
713 | depends on X86_RDC321X | |
714 | help | |
715 | This is the driver for the built in hardware watchdog | |
716 | in the RDC R-321x SoC. | |
717 | ||
718 | To compile this driver as a module, choose M here: the | |
719 | module will be called rdc321x_wdt. | |
720 | ||
1da177e4 LT |
721 | config 60XX_WDT |
722 | tristate "SBC-60XX Watchdog Timer" | |
261259b2 | 723 | depends on X86 |
1da177e4 LT |
724 | help |
725 | This driver can be used with the watchdog timer found on some | |
726 | single board computers, namely the 6010 PII based computer. | |
727 | It may well work with other cards. It reads port 0x443 to enable | |
728 | and re-set the watchdog timer, and reads port 0x45 to disable | |
729 | the watchdog. If you have a card that behave in similar ways, | |
730 | you can probably make this driver work with your card as well. | |
731 | ||
732 | You can compile this driver directly into the kernel, or use | |
733 | it as a module. The module will be called sbc60xxwdt. | |
734 | ||
3809ad38 IM |
735 | config SBC8360_WDT |
736 | tristate "SBC8360 Watchdog Timer" | |
261259b2 | 737 | depends on X86 |
3809ad38 IM |
738 | ---help--- |
739 | ||
740 | This is the driver for the hardware watchdog on the SBC8360 Single | |
741 | Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com). | |
742 | ||
743 | To compile this driver as a module, choose M here: the | |
4737f097 | 744 | module will be called sbc8360. |
3809ad38 IM |
745 | |
746 | Most people will say N. | |
747 | ||
c4c28335 GG |
748 | config SBC7240_WDT |
749 | tristate "SBC Nano 7240 Watchdog Timer" | |
3369465e | 750 | depends on X86_32 && !UML |
c4c28335 GG |
751 | ---help--- |
752 | This is the driver for the hardware watchdog found on the IEI | |
753 | single board computers EPIC Nano 7240 (and likely others). This | |
754 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
755 | and if it does, it reboots your computer after a certain amount of | |
756 | time. | |
757 | ||
758 | To compile this driver as a module, choose M here: the | |
759 | module will be called sbc7240_wdt. | |
760 | ||
1da177e4 LT |
761 | config CPU5_WDT |
762 | tristate "SMA CPU5 Watchdog" | |
261259b2 | 763 | depends on X86 |
1da177e4 LT |
764 | ---help--- |
765 | TBD. | |
766 | To compile this driver as a module, choose M here: the | |
767 | module will be called cpu5wdt. | |
768 | ||
4c6e63bd WVS |
769 | config SMSC_SCH311X_WDT |
770 | tristate "SMSC SCH311X Watchdog Timer" | |
771 | depends on X86 | |
772 | ---help--- | |
773 | This is the driver for the hardware watchdog timer on the | |
774 | SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset | |
775 | (LPC IO with 8042 KBC, Reset Generation, HWM and multiple | |
776 | serial ports). | |
777 | ||
778 | To compile this driver as a module, choose M here: the | |
779 | module will be called sch311x_wdt. | |
780 | ||
485ae77d SA |
781 | config SMSC37B787_WDT |
782 | tristate "Winbond SMsC37B787 Watchdog Timer" | |
261259b2 | 783 | depends on X86 |
485ae77d SA |
784 | ---help--- |
785 | This is the driver for the hardware watchdog component on the | |
786 | Winbond SMsC37B787 chipset as used on the NetRunner Mainboard | |
787 | from Vision Systems and maybe others. | |
788 | ||
789 | This watchdog simply watches your kernel to make sure it doesn't | |
790 | freeze, and if it does, it reboots your computer after a certain | |
791 | amount of time. | |
792 | ||
793 | Usually a userspace daemon will notify the kernel WDT driver that | |
794 | userspace is still alive, at regular intervals. | |
795 | ||
796 | To compile this driver as a module, choose M here: the | |
797 | module will be called smsc37b787_wdt. | |
798 | ||
799 | Most people will say N. | |
800 | ||
dc3c56b7 MV |
801 | config VIA_WDT |
802 | tristate "VIA Watchdog Timer" | |
690e7a70 | 803 | depends on X86 && PCI |
dc3c56b7 MV |
804 | select WATCHDOG_CORE |
805 | ---help--- | |
806 | This is the driver for the hardware watchdog timer on VIA | |
807 | southbridge chipset CX700, VX800/VX820 or VX855/VX875. | |
808 | ||
809 | To compile this driver as a module, choose M here; the module | |
810 | will be called via_wdt. | |
811 | ||
812 | Most people will say N. | |
813 | ||
1da177e4 | 814 | config W83627HF_WDT |
9c67bea4 | 815 | tristate "W83627HF/W83627DHG Watchdog Timer" |
261259b2 | 816 | depends on X86 |
1da177e4 LT |
817 | ---help--- |
818 | This is the driver for the hardware watchdog on the W83627HF chipset | |
819 | as used in Advantech PC-9578 and Tyan S2721-533 motherboards | |
9c67bea4 BLA |
820 | (and likely others). The driver also supports the W83627DHG chip. |
821 | This watchdog simply watches your kernel to make sure it doesn't | |
822 | freeze, and if it does, it reboots your computer after a certain | |
823 | amount of time. | |
1da177e4 LT |
824 | |
825 | To compile this driver as a module, choose M here: the | |
826 | module will be called w83627hf_wdt. | |
827 | ||
828 | Most people will say N. | |
829 | ||
f9a8c891 | 830 | config W83697HF_WDT |
ff02cfc7 | 831 | tristate "W83697HF/W83697HG Watchdog Timer" |
261259b2 | 832 | depends on X86 |
e0845bf4 | 833 | ---help--- |
ff02cfc7 ST |
834 | This is the driver for the hardware watchdog on the W83697HF/HG |
835 | chipset as used in Dedibox/VIA motherboards (and likely others). | |
836 | This watchdog simply watches your kernel to make sure it doesn't | |
837 | freeze, and if it does, it reboots your computer after a certain | |
838 | amount of time. | |
f9a8c891 | 839 | |
e0845bf4 WVS |
840 | To compile this driver as a module, choose M here: the |
841 | module will be called w83697hf_wdt. | |
f9a8c891 | 842 | |
e0845bf4 | 843 | Most people will say N. |
f9a8c891 | 844 | |
7d8b0906 FF |
845 | config W83697UG_WDT |
846 | tristate "W83697UG/W83697UF Watchdog Timer" | |
847 | depends on X86 | |
848 | ---help--- | |
849 | This is the driver for the hardware watchdog on the W83697UG/UF | |
850 | chipset as used in MSI Fuzzy CX700 VIA motherboards (and likely others). | |
851 | This watchdog simply watches your kernel to make sure it doesn't | |
852 | freeze, and if it does, it reboots your computer after a certain | |
853 | amount of time. | |
854 | ||
855 | To compile this driver as a module, choose M here: the | |
856 | module will be called w83697ug_wdt. | |
857 | ||
858 | Most people will say N. | |
859 | ||
1da177e4 LT |
860 | config W83877F_WDT |
861 | tristate "W83877F (EMACS) Watchdog Timer" | |
261259b2 | 862 | depends on X86 |
1da177e4 LT |
863 | ---help--- |
864 | This is the driver for the hardware watchdog on the W83877F chipset | |
865 | as used in EMACS PC-104 motherboards (and likely others). This | |
866 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
867 | and if it does, it reboots your computer after a certain amount of | |
868 | time. | |
869 | ||
870 | To compile this driver as a module, choose M here: the | |
871 | module will be called w83877f_wdt. | |
872 | ||
873 | Most people will say N. | |
874 | ||
b4cc4aa2 JMG |
875 | config W83977F_WDT |
876 | tristate "W83977F (PCM-5335) Watchdog Timer" | |
261259b2 | 877 | depends on X86 |
b4cc4aa2 JMG |
878 | ---help--- |
879 | This is the driver for the hardware watchdog on the W83977F I/O chip | |
880 | as used in AAEON's PCM-5335 SBC (and likely others). This | |
881 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
882 | and if it does, it reboots your computer after a certain amount of | |
883 | time. | |
884 | ||
885 | To compile this driver as a module, choose M here: the | |
886 | module will be called w83977f_wdt. | |
887 | ||
1da177e4 LT |
888 | config MACHZ_WDT |
889 | tristate "ZF MachZ Watchdog" | |
261259b2 | 890 | depends on X86 |
1da177e4 LT |
891 | ---help--- |
892 | If you are using a ZF Micro MachZ processor, say Y here, otherwise | |
e0845bf4 | 893 | N. This is the driver for the watchdog timer built-in on that |
1da177e4 LT |
894 | processor using ZF-Logic interface. This watchdog simply watches |
895 | your kernel to make sure it doesn't freeze, and if it does, it | |
896 | reboots your computer after a certain amount of time. | |
897 | ||
898 | To compile this driver as a module, choose M here: the | |
899 | module will be called machzwd. | |
900 | ||
eed6565f CC |
901 | config SBC_EPX_C3_WATCHDOG |
902 | tristate "Winsystems SBC EPX-C3 watchdog" | |
261259b2 | 903 | depends on X86 |
eed6565f CC |
904 | ---help--- |
905 | This is the driver for the built-in watchdog timer on the EPX-C3 | |
906 | Single-board computer made by Winsystems, Inc. | |
907 | ||
908 | *Note*: This hardware watchdog is not probeable and thus there | |
909 | is no way to know if writing to its IO address will corrupt | |
910 | your system or have any real effect. The only way to be sure | |
911 | that this driver does what you want is to make sure you | |
2621e2a1 | 912 | are running it on an EPX-C3 from Winsystems with the watchdog |
eed6565f CC |
913 | timer at IO address 0x1ee and 0x1ef. It will write to both those |
914 | IO ports. Basically, the assumption is made that if you compile | |
915 | this driver into your kernel and/or load it as a module, that you | |
916 | know what you are doing and that you are in fact running on an | |
917 | EPX-C3 board! | |
918 | ||
919 | To compile this driver as a module, choose M here: the | |
920 | module will be called sbc_epx_c3. | |
921 | ||
c0e962f9 | 922 | # M32R Architecture |
1da177e4 | 923 | |
c0e962f9 WVS |
924 | # M68K Architecture |
925 | ||
4157a04d PDM |
926 | config M54xx_WATCHDOG |
927 | tristate "MCF54xx watchdog support" | |
88cce427 PDM |
928 | depends on M548x |
929 | help | |
930 | To compile this driver as a module, choose M here: the | |
4157a04d | 931 | module will be called m54xx_wdt. |
c0e962f9 | 932 | |
e9659e69 AC |
933 | # MicroBlaze Architecture |
934 | ||
935 | config XILINX_WATCHDOG | |
936 | tristate "Xilinx Watchdog timer" | |
937 | depends on MICROBLAZE | |
938 | ---help--- | |
939 | Watchdog driver for the xps_timebase_wdt ip core. | |
940 | ||
941 | IMPORTANT: The xps_timebase_wdt parent must have the property | |
942 | "clock-frequency" at device tree. | |
943 | ||
944 | To compile this driver as a module, choose M here: the | |
945 | module will be called of_xilinx_wdt. | |
946 | ||
c0e962f9 WVS |
947 | # MIPS Architecture |
948 | ||
f8394f61 GJ |
949 | config ATH79_WDT |
950 | tristate "Atheros AR71XX/AR724X/AR913X hardware watchdog" | |
951 | depends on ATH79 | |
952 | help | |
953 | Hardware driver for the built-in watchdog timer on the Atheros | |
954 | AR71XX/AR724X/AR913X SoCs. | |
955 | ||
90074dce | 956 | config BCM47XX_WDT |
957 | tristate "Broadcom BCM47xx Watchdog Timer" | |
958 | depends on BCM47XX | |
959 | help | |
6b2aac42 | 960 | Hardware driver for the Broadcom BCM47xx Watchdog Timer. |
90074dce | 961 | |
03ec5856 FF |
962 | config RC32434_WDT |
963 | tristate "IDT RC32434 SoC Watchdog Timer" | |
964 | depends on MIKROTIK_RB532 | |
965 | help | |
966 | Hardware driver for the IDT RC32434 SoC built-in | |
967 | watchdog timer. | |
968 | ||
969 | To compile this driver as a module, choose M here: the | |
970 | module will be called rc32434_wdt. | |
971 | ||
c0e962f9 WVS |
972 | config INDYDOG |
973 | tristate "Indy/I2 Hardware Watchdog" | |
1ceea824 | 974 | depends on SGI_HAS_INDYDOG |
c0e962f9 WVS |
975 | help |
976 | Hardware driver for the Indy's/I2's watchdog. This is a | |
977 | watchdog timer that will reboot the machine after a 60 second | |
978 | timer expired and no process has written to /dev/watchdog during | |
979 | that time. | |
980 | ||
f865c352 PC |
981 | config JZ4740_WDT |
982 | tristate "Ingenic jz4740 SoC hardware watchdog" | |
983 | depends on MACH_JZ4740 | |
85f6df14 | 984 | select WATCHDOG_CORE |
f865c352 PC |
985 | help |
986 | Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs. | |
987 | ||
c0e962f9 WVS |
988 | config WDT_MTX1 |
989 | tristate "MTX-1 Hardware Watchdog" | |
990 | depends on MIPS_MTX1 | |
991 | help | |
992 | Hardware driver for the MTX-1 boards. This is a watchdog timer that | |
993 | will reboot the machine after a 100 seconds timer expired. | |
994 | ||
33c050c5 DL |
995 | config PNX833X_WDT |
996 | tristate "PNX833x Hardware Watchdog" | |
997 | depends on SOC_PNX8335 | |
998 | help | |
999 | Hardware driver for the PNX833x's watchdog. This is a | |
25985edc | 1000 | watchdog timer that will reboot the machine after a programmable |
33c050c5 DL |
1001 | timer has expired and no process has written to /dev/watchdog during |
1002 | that time. | |
1003 | ||
75c752e6 AS |
1004 | config SIBYTE_WDOG |
1005 | tristate "Sibyte SoC hardware watchdog" | |
1006 | depends on CPU_SB1 | |
1007 | help | |
1008 | Watchdog driver for the built in watchdog hardware in Sibyte | |
1009 | SoC processors. There are apparently two watchdog timers | |
1010 | on such processors; this driver supports only the first one, | |
1011 | because currently Linux only supports exporting one watchdog | |
1012 | to userspace. | |
1013 | ||
1014 | To compile this driver as a loadable module, choose M here. | |
1015 | The module will be called sb_wdog. | |
1016 | ||
c283cf2c MC |
1017 | config AR7_WDT |
1018 | tristate "TI AR7 Watchdog Timer" | |
1019 | depends on AR7 | |
1020 | help | |
1021 | Hardware driver for the TI AR7 Watchdog Timer. | |
1022 | ||
6f702fce AN |
1023 | config TXX9_WDT |
1024 | tristate "Toshiba TXx9 Watchdog Timer" | |
1025 | depends on CPU_TX39XX || CPU_TX49XX | |
d6245842 | 1026 | select WATCHDOG_CORE |
6f702fce AN |
1027 | help |
1028 | Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. | |
1029 | ||
4c076fb4 DD |
1030 | config OCTEON_WDT |
1031 | tristate "Cavium OCTEON SOC family Watchdog Timer" | |
1032 | depends on CPU_CAVIUM_OCTEON | |
1033 | default y | |
1034 | select EXPORT_UASM if OCTEON_WDT = m | |
1035 | help | |
1036 | Hardware driver for OCTEON's on chip watchdog timer. | |
1037 | Enables the watchdog for all cores running Linux. It | |
1038 | installs a NMI handler and pokes the watchdog based on an | |
1039 | interrupt. On first expiration of the watchdog, the | |
1040 | interrupt handler pokes it. The second expiration causes an | |
1041 | NMI that prints a message. The third expiration causes a | |
1042 | global soft reset. | |
1043 | ||
1044 | When userspace has /dev/watchdog open, no poking is done | |
1045 | from the first interrupt, it is then only poked when the | |
1046 | device is written. | |
1047 | ||
b63aa731 FF |
1048 | config BCM63XX_WDT |
1049 | tristate "Broadcom BCM63xx hardware watchdog" | |
1050 | depends on BCM63XX | |
1051 | help | |
1052 | Watchdog driver for the built in watchdog hardware in Broadcom | |
1053 | BCM63xx SoC. | |
1054 | ||
1055 | To compile this driver as a loadable module, choose M here. | |
1056 | The module will be called bcm63xx_wdt. | |
1057 | ||
2f58b8d0 JC |
1058 | config LANTIQ_WDT |
1059 | tristate "Lantiq SoC watchdog" | |
1060 | depends on LANTIQ | |
1061 | help | |
1062 | Hardware driver for the Lantiq SoC Watchdog Timer. | |
1063 | ||
c0e962f9 WVS |
1064 | # PARISC Architecture |
1065 | ||
1066 | # POWERPC Architecture | |
1da177e4 | 1067 | |
3268b561 | 1068 | config GEF_WDT |
cda61c94 | 1069 | tristate "GE Watchdog Timer" |
330bbf48 | 1070 | depends on GE_FPGA |
3268b561 | 1071 | ---help--- |
cda61c94 | 1072 | Watchdog timer found in a number of GE single board computers. |
3268b561 | 1073 | |
8cf18971 | 1074 | config MPC5200_WDT |
6d535599 | 1075 | bool "MPC52xx Watchdog Timer" |
8cf18971 | 1076 | depends on PPC_MPC52xx |
6d535599 AD |
1077 | help |
1078 | Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog. | |
8cf18971 | 1079 | |
28acd02f AV |
1080 | config 8xxx_WDT |
1081 | tristate "MPC8xxx Platform Watchdog Timer" | |
0d7b1014 | 1082 | depends on PPC_8xx || PPC_83xx || PPC_86xx |
28acd02f AV |
1083 | help |
1084 | This driver is for a SoC level watchdog that exists on some | |
1085 | Freescale PowerPC processors. So far this driver supports: | |
0d7b1014 | 1086 | - MPC8xx watchdogs |
28acd02f AV |
1087 | - MPC83xx watchdogs |
1088 | - MPC86xx watchdogs | |
1089 | ||
1090 | For BookE processors (MPC85xx) use the BOOKE_WDT driver instead. | |
fabbfb9e | 1091 | |
3be10211 JC |
1092 | config MV64X60_WDT |
1093 | tristate "MV64X60 (Marvell Discovery) Watchdog Timer" | |
261259b2 | 1094 | depends on MV64X60 |
3be10211 | 1095 | |
618efba9 SM |
1096 | config PIKA_WDT |
1097 | tristate "PIKA FPGA Watchdog" | |
1098 | depends on WARP | |
1099 | default y | |
1100 | help | |
1101 | This enables the watchdog in the PIKA FPGA. Currently used on | |
1102 | the Warp platform. | |
1103 | ||
a2f40ccd | 1104 | config BOOKE_WDT |
fbdd7144 | 1105 | tristate "PowerPC Book-E Watchdog Timer" |
261259b2 | 1106 | depends on BOOKE || 4xx |
39cdc4bf | 1107 | ---help--- |
fbdd7144 TT |
1108 | Watchdog driver for PowerPC Book-E chips, such as the Freescale |
1109 | MPC85xx SOCs and the IBM PowerPC 440. | |
1110 | ||
39cdc4bf KG |
1111 | Please see Documentation/watchdog/watchdog-api.txt for |
1112 | more information. | |
a2f40ccd | 1113 | |
e0dc09ff TT |
1114 | config BOOKE_WDT_DEFAULT_TIMEOUT |
1115 | int "PowerPC Book-E Watchdog Timer Default Timeout" | |
1116 | depends on BOOKE_WDT | |
1117 | default 38 if FSL_BOOKE | |
1118 | range 0 63 if FSL_BOOKE | |
1119 | default 3 if !FSL_BOOKE | |
1120 | range 0 3 if !FSL_BOOKE | |
1121 | help | |
1122 | Select the default watchdog timer period to be used by the PowerPC | |
1123 | Book-E watchdog driver. A watchdog "event" occurs when the bit | |
1124 | position represented by this number transitions from zero to one. | |
1125 | ||
1126 | For Freescale Book-E processors, this is a number between 0 and 63. | |
1127 | For other Book-E processors, this is a number between 0 and 3. | |
1128 | ||
e1d1d68a | 1129 | The value can be overridden by the wdt_period command-line parameter. |
e0dc09ff | 1130 | |
180536f8 WVS |
1131 | # PPC64 Architecture |
1132 | ||
1133 | config WATCHDOG_RTAS | |
1134 | tristate "RTAS watchdog" | |
261259b2 | 1135 | depends on PPC_RTAS |
180536f8 WVS |
1136 | help |
1137 | This driver adds watchdog support for the RTAS watchdog. | |
1138 | ||
c310e2b9 | 1139 | To compile this driver as a module, choose M here. The module |
180536f8 WVS |
1140 | will be called wdrtas. |
1141 | ||
1da177e4 LT |
1142 | # S390 Architecture |
1143 | ||
1144 | config ZVM_WATCHDOG | |
1145 | tristate "z/VM Watchdog Timer" | |
261259b2 | 1146 | depends on S390 |
1da177e4 LT |
1147 | help |
1148 | IBM s/390 and zSeries machines running under z/VM 5.1 or later | |
1149 | provide a virtual watchdog timer to their guest that cause a | |
1150 | user define Control Program command to be executed after a | |
1151 | timeout. | |
1152 | ||
1153 | To compile this driver as a module, choose M here. The module | |
1154 | will be called vmwatchdog. | |
1155 | ||
c0e962f9 | 1156 | # SUPERH (sh + sh64) Architecture |
1da177e4 LT |
1157 | |
1158 | config SH_WDT | |
1159 | tristate "SuperH Watchdog" | |
d0afa579 | 1160 | depends on SUPERH && (CPU_SH3 || CPU_SH4) |
1950f499 | 1161 | select WATCHDOG_CORE |
1da177e4 LT |
1162 | help |
1163 | This driver adds watchdog support for the integrated watchdog in the | |
1164 | SuperH processors. If you have one of these processors and wish | |
1165 | to have watchdog support enabled, say Y, otherwise say N. | |
1166 | ||
1167 | As a side note, saying Y here will automatically boost HZ to 1000 | |
1168 | so that the timer has a chance to clear the overflow counter. On | |
1169 | slower systems (such as the SH-2 and SH-3) this will likely yield | |
1170 | some performance issues. As such, the WDT should be avoided here | |
1171 | unless it is absolutely necessary. | |
1172 | ||
1173 | To compile this driver as a module, choose M here: the | |
1174 | module will be called shwdt. | |
1175 | ||
c0e962f9 WVS |
1176 | # SPARC Architecture |
1177 | ||
1da177e4 LT |
1178 | # SPARC64 Architecture |
1179 | ||
1180 | config WATCHDOG_CP1XXX | |
1181 | tristate "CP1XXX Hardware Watchdog support" | |
261259b2 | 1182 | depends on SPARC64 && PCI |
1da177e4 LT |
1183 | ---help--- |
1184 | This is the driver for the hardware watchdog timers present on | |
1185 | Sun Microsystems CompactPCI models CP1400 and CP1500. | |
1186 | ||
1187 | To compile this driver as a module, choose M here: the | |
1188 | module will be called cpwatchdog. | |
1189 | ||
1190 | If you do not have a CompactPCI model CP1400 or CP1500, or | |
1191 | another UltraSPARC-IIi-cEngine boardset with hardware watchdog, | |
1192 | you should say N to this option. | |
1193 | ||
1194 | config WATCHDOG_RIO | |
1195 | tristate "RIO Hardware Watchdog support" | |
261259b2 | 1196 | depends on SPARC64 && PCI |
1da177e4 LT |
1197 | help |
1198 | Say Y here to support the hardware watchdog capability on Sun RIO | |
1199 | machines. The watchdog timeout period is normally one minute but | |
1200 | can be changed with a boot-time parameter. | |
1201 | ||
c0e962f9 WVS |
1202 | # XTENSA Architecture |
1203 | ||
066d6c7f JB |
1204 | # Xen Architecture |
1205 | ||
1206 | config XEN_WDT | |
1207 | tristate "Xen Watchdog support" | |
1208 | depends on XEN | |
1209 | help | |
1210 | Say Y here to support the hypervisor watchdog capability provided | |
1211 | by Xen 4.0 and newer. The watchdog timeout period is normally one | |
1212 | minute but can be changed with a boot-time parameter. | |
1213 | ||
d805a786 AV |
1214 | config UML_WATCHDOG |
1215 | tristate "UML watchdog" | |
1216 | depends on UML | |
1217 | ||
1da177e4 LT |
1218 | # |
1219 | # ISA-based Watchdog Cards | |
1220 | # | |
1221 | ||
1222 | comment "ISA-based Watchdog Cards" | |
261259b2 | 1223 | depends on ISA |
1da177e4 LT |
1224 | |
1225 | config PCWATCHDOG | |
1226 | tristate "Berkshire Products ISA-PC Watchdog" | |
261259b2 | 1227 | depends on ISA |
1da177e4 LT |
1228 | ---help--- |
1229 | This is the driver for the Berkshire Products ISA-PC Watchdog card. | |
1230 | This card simply watches your kernel to make sure it doesn't freeze, | |
1231 | and if it does, it reboots your computer after a certain amount of | |
1232 | time. This driver is like the WDT501 driver but for different | |
1233 | hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC | |
1234 | watchdog cards can be ordered from <http://www.berkprod.com/>. | |
1235 | ||
1236 | To compile this driver as a module, choose M here: the | |
1237 | module will be called pcwd. | |
1238 | ||
1239 | Most people will say N. | |
1240 | ||
1241 | config MIXCOMWD | |
1242 | tristate "Mixcom Watchdog" | |
261259b2 | 1243 | depends on ISA |
1da177e4 LT |
1244 | ---help--- |
1245 | This is a driver for the Mixcom hardware watchdog cards. This | |
1246 | watchdog simply watches your kernel to make sure it doesn't freeze, | |
1247 | and if it does, it reboots your computer after a certain amount of | |
1248 | time. | |
1249 | ||
1250 | To compile this driver as a module, choose M here: the | |
1251 | module will be called mixcomwd. | |
1252 | ||
1253 | Most people will say N. | |
1254 | ||
1255 | config WDT | |
1256 | tristate "WDT Watchdog timer" | |
261259b2 | 1257 | depends on ISA |
1da177e4 LT |
1258 | ---help--- |
1259 | If you have a WDT500P or WDT501P watchdog board, say Y here, | |
1260 | otherwise N. It is not possible to probe for this board, which means | |
1261 | that you have to inform the kernel about the IO port and IRQ that | |
1262 | is needed (you can do this via the io and irq parameters) | |
1263 | ||
1264 | To compile this driver as a module, choose M here: the | |
1265 | module will be called wdt. | |
1266 | ||
1da177e4 LT |
1267 | # |
1268 | # PCI-based Watchdog Cards | |
1269 | # | |
1270 | ||
1271 | comment "PCI-based Watchdog Cards" | |
261259b2 | 1272 | depends on PCI |
1da177e4 LT |
1273 | |
1274 | config PCIPCWATCHDOG | |
1275 | tristate "Berkshire Products PCI-PC Watchdog" | |
261259b2 | 1276 | depends on PCI |
1da177e4 LT |
1277 | ---help--- |
1278 | This is the driver for the Berkshire Products PCI-PC Watchdog card. | |
1279 | This card simply watches your kernel to make sure it doesn't freeze, | |
1280 | and if it does, it reboots your computer after a certain amount of | |
1281 | time. The card can also monitor the internal temperature of the PC. | |
1282 | More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>. | |
1283 | ||
1284 | To compile this driver as a module, choose M here: the | |
1285 | module will be called pcwd_pci. | |
1286 | ||
1287 | Most people will say N. | |
1288 | ||
1289 | config WDTPCI | |
1290 | tristate "PCI-WDT500/501 Watchdog timer" | |
261259b2 | 1291 | depends on PCI |
1da177e4 LT |
1292 | ---help--- |
1293 | If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N. | |
1294 | ||
9b901ee0 WVS |
1295 | If you have a PCI-WDT501 watchdog board then you can enable the |
1296 | temperature sensor by setting the type parameter to 501. | |
1da177e4 LT |
1297 | |
1298 | If you want to enable the Fan Tachometer on the PCI-WDT501, then you | |
1299 | can do this via the tachometer parameter. Only do this if you have a | |
1300 | fan tachometer actually set up. | |
1301 | ||
9b901ee0 WVS |
1302 | To compile this driver as a module, choose M here: the |
1303 | module will be called wdt_pci. | |
1304 | ||
1da177e4 LT |
1305 | # |
1306 | # USB-based Watchdog Cards | |
1307 | # | |
1308 | ||
1309 | comment "USB-based Watchdog Cards" | |
261259b2 | 1310 | depends on USB |
1da177e4 LT |
1311 | |
1312 | config USBPCWATCHDOG | |
1313 | tristate "Berkshire Products USB-PC Watchdog" | |
261259b2 | 1314 | depends on USB |
1da177e4 LT |
1315 | ---help--- |
1316 | This is the driver for the Berkshire Products USB-PC Watchdog card. | |
1317 | This card simply watches your kernel to make sure it doesn't freeze, | |
1318 | and if it does, it reboots your computer after a certain amount of | |
1319 | time. The card can also monitor the internal temperature of the PC. | |
1320 | More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>. | |
1321 | ||
1322 | To compile this driver as a module, choose M here: the | |
1323 | module will be called pcwd_usb. | |
1324 | ||
1325 | Most people will say N. | |
1326 | ||
261259b2 | 1327 | endif # WATCHDOG |