Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

[deliverable/linux.git] / drivers / watchdog / w83627hf_wdt.c

/*
 *	w83627hf/thf WDT driver
 *
 *	(c) Copyright 2013 Guenter Roeck
 *		converted to watchdog infrastructure
 *
 *	(c) Copyright 2007 Vlad Drukker <vlad@storewiz.com>
 *		added support for W83627THF.
 *
 *	(c) Copyright 2003,2007 Pádraig Brady <P@draigBrady.com>
 *
 *	Based on advantechwdt.c which is based on wdt.c.
 *	Original copyright messages:
 *
 *	(c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
 *
 *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
 *						All Rights Reserved.
 *
 *	This program is free software; you can redistribute it and/or
 *	modify it under the terms of the GNU General Public License
 *	as published by the Free Software Foundation; either version
 *	2 of the License, or (at your option) any later version.
 *
 *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
 *	warranty for any of this software. This material is provided
 *	"AS-IS" and at no charge.
 *
 *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/watchdog.h>
#include <linux/ioport.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/io.h>

#define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT"
#define WATCHDOG_TIMEOUT 60		/* 60 sec default timeout */

static int wdt_io;
static int cr_wdt_timeout;	/* WDT timeout register */
static int cr_wdt_control;	/* WDT control register */

enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
	     w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p,
	     w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792 };

static int timeout;			/* in seconds */
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,
		"Watchdog timeout in seconds. 1 <= timeout <= 255, default="
				__MODULE_STRING(WATCHDOG_TIMEOUT) ".");

static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout,
		"Watchdog cannot be stopped once started (default="
				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");

static int early_disable;
module_param(early_disable, int, 0);
MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)");

/*
 *	Kernel methods.
 */

#define WDT_EFER (wdt_io+0)   /* Extended Function Enable Registers */
#define WDT_EFIR (wdt_io+0)   /* Extended Function Index Register
							(same as EFER) */
#define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */

#define W83627HF_LD_WDT		0x08

#define W83627HF_ID		0x52
#define W83627S_ID		0x59
#define W83697HF_ID		0x60
#define W83697UG_ID		0x68
#define W83637HF_ID		0x70
#define W83627THF_ID		0x82
#define W83687THF_ID		0x85
#define W83627EHF_ID		0x88
#define W83627DHG_ID		0xa0
#define W83627UHG_ID		0xa2
#define W83667HG_ID		0xa5
#define W83627DHG_P_ID		0xb0
#define W83667HG_B_ID		0xb3
#define NCT6775_ID		0xb4
#define NCT6776_ID		0xc3
#define NCT6779_ID		0xc5
#define NCT6791_ID		0xc8
#define NCT6792_ID		0xc9

#define W83627HF_WDT_TIMEOUT	0xf6
#define W83697HF_WDT_TIMEOUT	0xf4

#define W83627HF_WDT_CONTROL	0xf5
#define W83697HF_WDT_CONTROL	0xf3

static void superio_outb(int reg, int val)
{
	outb(reg, WDT_EFER);
	outb(val, WDT_EFDR);
}

static inline int superio_inb(int reg)
{
	outb(reg, WDT_EFER);
	return inb(WDT_EFDR);
}

static int superio_enter(void)
{
	if (!request_muxed_region(wdt_io, 2, WATCHDOG_NAME))
		return -EBUSY;

	outb_p(0x87, WDT_EFER); /* Enter extended function mode */
	outb_p(0x87, WDT_EFER); /* Again according to manual */

	return 0;
}

static void superio_select(int ld)
{
	superio_outb(0x07, ld);
}

static void superio_exit(void)
{
	outb_p(0xAA, WDT_EFER); /* Leave extended function mode */
	release_region(wdt_io, 2);
}

static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
{
	int ret;
	unsigned char t;

	ret = superio_enter();
	if (ret)
		return ret;

	superio_select(W83627HF_LD_WDT);

	/* set CR30 bit 0 to activate GPIO2 */
	t = superio_inb(0x30);
	if (!(t & 0x01))
		superio_outb(0x30, t | 0x01);

	switch (chip) {
	case w83627hf:
	case w83627s:
		t = superio_inb(0x2B) & ~0x10;
		superio_outb(0x2B, t); /* set GPIO24 to WDT0 */
		break;
	case w83697hf:
		/* Set pin 119 to WDTO# mode (= CR29, WDT0) */
		t = superio_inb(0x29) & ~0x60;
		t |= 0x20;
		superio_outb(0x29, t);
		break;
	case w83697ug:
		/* Set pin 118 to WDTO# mode */
		t = superio_inb(0x2b) & ~0x04;
		superio_outb(0x2b, t);
		break;
	case w83627thf:
		t = (superio_inb(0x2B) & ~0x08) | 0x04;
		superio_outb(0x2B, t); /* set GPIO3 to WDT0 */
		break;
	case w83627dhg:
	case w83627dhg_p:
		t = superio_inb(0x2D) & ~0x01; /* PIN77 -> WDT0# */
		superio_outb(0x2D, t); /* set GPIO5 to WDT0 */
		t = superio_inb(cr_wdt_control);
		t |= 0x02;	/* enable the WDTO# output low pulse
				 * to the KBRST# pin */
		superio_outb(cr_wdt_control, t);
		break;
	case w83637hf:
		break;
	case w83687thf:
		t = superio_inb(0x2C) & ~0x80; /* PIN47 -> WDT0# */
		superio_outb(0x2C, t);
		break;
	case w83627ehf:
	case w83627uhg:
	case w83667hg:
	case w83667hg_b:
	case nct6775:
	case nct6776:
	case nct6779:
	case nct6791:
	case nct6792:
		/*
		 * These chips have a fixed WDTO# output pin (W83627UHG),
		 * or support more than one WDTO# output pin.
		 * Don't touch its configuration, and hope the BIOS
		 * does the right thing.
		 */
		t = superio_inb(cr_wdt_control);
		t |= 0x02;	/* enable the WDTO# output low pulse
				 * to the KBRST# pin */
		superio_outb(cr_wdt_control, t);
		break;
	default:
		break;
	}

	t = superio_inb(cr_wdt_timeout);
	if (t != 0) {
		if (early_disable) {
			pr_warn("Stopping previously enabled watchdog until userland kicks in\n");
			superio_outb(cr_wdt_timeout, 0);
		} else {
			pr_info("Watchdog already running. Resetting timeout to %d sec\n",
				wdog->timeout);
			superio_outb(cr_wdt_timeout, wdog->timeout);
		}
	}