[deliverable/linux.git] / fs / squashfs / Kconfig

config SQUASHFS
	tristate "SquashFS 4.0 - Squashed file system support"
	depends on BLOCK
	help
	  Saying Y here includes support for SquashFS 4.0 (a Compressed
	  Read-Only File System).  Squashfs is a highly compressed read-only
	  filesystem for Linux.  It uses zlib, lzo or xz compression to
	  compress both files, inodes and directories.  Inodes in the system
	  are very small and all blocks are packed to minimise data overhead.
	  Block sizes greater than 4K are supported up to a maximum of 1 Mbytes
	  (default block size 128K).  SquashFS 4.0 supports 64 bit filesystems
	  and files (larger than 4GB), full uid/gid information, hard links and
	  timestamps.

	  Squashfs is intended for general read-only filesystem use, for
	  archival use (i.e. in cases where a .tar.gz file may be used), and in
	  embedded systems where low overhead is needed.  Further information
	  and tools are available from http://squashfs.sourceforge.net.

	  If you want to compile this as a module ( = code which can be
	  inserted in and removed from the running kernel whenever you want),
	  say M here.  The module will be called squashfs.  Note that the root
	  file system (the one containing the directory /) cannot be compiled
	  as a module.

	  If unsure, say N.

config SQUASHFS_XATTR
	bool "Squashfs XATTR support"
	depends on SQUASHFS
	help
	  Saying Y here includes support for extended attributes (xattrs).
	  Xattrs are name:value pairs associated with inodes by
	  the kernel or by users (see the attr(5) manual page).

	  If unsure, say N.

config SQUASHFS_ZLIB
	bool "Include support for ZLIB compressed file systems"
	depends on SQUASHFS
	select ZLIB_INFLATE
	default y
	help
	  ZLIB compression is the standard compression used by Squashfs
	  file systems.  It offers a good trade-off between compression
	  achieved and the amount of CPU time and memory necessary to
	  compress and decompress.

	  If unsure, say Y.

config SQUASHFS_LZO
	bool "Include support for LZO compressed file systems"
	depends on SQUASHFS
	select LZO_DECOMPRESS
	help
	  Saying Y here includes support for reading Squashfs file systems
	  compressed with LZO compression.  LZO compression is mainly
	  aimed at embedded systems with slower CPUs where the overheads
	  of zlib are too high.

	  LZO is not the standard compression used in Squashfs and so most
	  file systems will be readable without selecting this option.

	  If unsure, say N.

config SQUASHFS_XZ
	bool "Include support for XZ compressed file systems"
	depends on SQUASHFS
	select XZ_DEC
	help
	  Saying Y here includes support for reading Squashfs file systems
	  compressed with XZ compression.  XZ gives better compression than
	  the default zlib compression, at the expense of greater CPU and
	  memory overhead.

	  XZ is not the standard compression used in Squashfs and so most
	  file systems will be readable without selecting this option.

	  If unsure, say N.

config SQUASHFS_EMBEDDED
	bool "Additional option for memory-constrained systems"
	depends on SQUASHFS
	help
	  Saying Y here allows you to specify cache size.

	  If unsure, say N.

config SQUASHFS_FRAGMENT_CACHE_SIZE
	int "Number of fragments cached" if SQUASHFS_EMBEDDED
	depends on SQUASHFS
	default "3"
	help
	  By default SquashFS caches the last 3 fragments read from
	  the filesystem.  Increasing this amount may mean SquashFS
	  has to re-read fragments less often from disk, at the expense
	  of extra system memory.  Decreasing this amount will mean
	  SquashFS uses less memory at the expense of extra reads from disk.

	  Note there must be at least one cached fragment.  Anything
	  much more than three will probably not make much difference.
Commit	Line	Data
22635ec9 AD	1	config SQUASHFS
	2	tristate "SquashFS 4.0 - Squashed file system support"
	3	depends on BLOCK
22635ec9 AD	4	help
	5	Saying Y here includes support for SquashFS 4.0 (a Compressed
	6	Read-Only File System). Squashfs is a highly compressed read-only
681ffe2e PL	7	filesystem for Linux. It uses zlib, lzo or xz compression to
	8	compress both files, inodes and directories. Inodes in the system
	9	are very small and all blocks are packed to minimise data overhead.
	10	Block sizes greater than 4K are supported up to a maximum of 1 Mbytes
	11	(default block size 128K). SquashFS 4.0 supports 64 bit filesystems
	12	and files (larger than 4GB), full uid/gid information, hard links and
4b676d2d	13	timestamps.
22635ec9 AD	14
	15	Squashfs is intended for general read-only filesystem use, for
	16	archival use (i.e. in cases where a .tar.gz file may be used), and in
	17	embedded systems where low overhead is needed. Further information
	18	and tools are available from http://squashfs.sourceforge.net.
	19
	20	If you want to compile this as a module ( = code which can be
	21	inserted in and removed from the running kernel whenever you want),
395cf969 PB	22	say M here. The module will be called squashfs. Note that the root
	23	file system (the one containing the directory /) cannot be compiled
	24	as a module.
22635ec9 AD	25
	26	If unsure, say N.
	27
637d5c9a	28	config SQUASHFS_XATTR
01e5b4e4 PL	29	bool "Squashfs XATTR support"
01e5b4e4 PL	30	depends on SQUASHFS
01e5b4e4 PL	31	help
	32	Saying Y here includes support for extended attributes (xattrs).
	33	Xattrs are name:value pairs associated with inodes by
	34	the kernel or by users (see the attr(5) manual page).
	35
	36	If unsure, say N.
	37
cc6d3497 PL	38	config SQUASHFS_ZLIB
	39	bool "Include support for ZLIB compressed file systems"
	40	depends on SQUASHFS
	41	select ZLIB_INFLATE
	42	default y
	43	help
	44	ZLIB compression is the standard compression used by Squashfs
	45	file systems. It offers a good trade-off between compression
	46	achieved and the amount of CPU time and memory necessary to
	47	compress and decompress.
	48
	49	If unsure, say Y.
	50
79cb8ced CJ	51	config SQUASHFS_LZO
	52	bool "Include support for LZO compressed file systems"
	53	depends on SQUASHFS
	54	select LZO_DECOMPRESS
4b676d2d PL	55	help
4b676d2d PL	56	Saying Y here includes support for reading Squashfs file systems
70f23fd6	57	compressed with LZO compression. LZO compression is mainly
4b676d2d PL	58	aimed at embedded systems with slower CPUs where the overheads
4b676d2d PL	59	of zlib are too high.
79cb8ced	60
4b676d2d PL	61	LZO is not the standard compression used in Squashfs and so most
4b676d2d PL	62	file systems will be readable without selecting this option.
22635ec9	63
4b676d2d PL	64	If unsure, say N.
4b676d2d PL	65
7a43ae52 PL	66	config SQUASHFS_XZ
	67	bool "Include support for XZ compressed file systems"
	68	depends on SQUASHFS
	69	select XZ_DEC
	70	help
	71	Saying Y here includes support for reading Squashfs file systems
70f23fd6	72	compressed with XZ compression. XZ gives better compression than
7a43ae52 PL	73	the default zlib compression, at the expense of greater CPU and
	74	memory overhead.
	75
	76	XZ is not the standard compression used in Squashfs and so most
	77	file systems will be readable without selecting this option.
	78
	79	If unsure, say N.
	80
4b676d2d PL	81	config SQUASHFS_EMBEDDED
4b676d2d PL	82	bool "Additional option for memory-constrained systems"
22635ec9	83	depends on SQUASHFS
22635ec9 AD	84	help
	85	Saying Y here allows you to specify cache size.
	86
	87	If unsure, say N.
	88
	89	config SQUASHFS_FRAGMENT_CACHE_SIZE
	90	int "Number of fragments cached" if SQUASHFS_EMBEDDED
	91	depends on SQUASHFS
	92	default "3"
	93	help
	94	By default SquashFS caches the last 3 fragments read from
	95	the filesystem. Increasing this amount may mean SquashFS
	96	has to re-read fragments less often from disk, at the expense
	97	of extra system memory. Decreasing this amount will mean
	98	SquashFS uses less memory at the expense of extra reads from disk.
	99
	100	Note there must be at least one cached fragment. Anything
	101	much more than three will probably not make much difference.