Commit | Line | Data |
---|---|---|
252b5132 | 1 | -*- text -*- |
96a84ea3 | 2 | |
514bbb0f AV |
3 | * Add support for the Armv8.1-M Mainline and M-profile Vector Extension (MVE) |
4 | instructions. | |
5 | ||
6f2117ba PH |
6 | * For MIPS, Add -m[no-]fix-loongson3-llsc option to fix (or not) Loongson3 LLSC |
7 | Errata. Add a --enable-mips-fix-loongson3-llsc=[yes|no] configure time option | |
8 | to set the default behavior. Set the default if the configure option is not used | |
9 | to "no". | |
10 | ||
546053ac DZ |
11 | * Add support for the Arm Cortex-A76AE, Cortex-A77 and Cortex-M35P |
12 | processors. | |
13 | ||
14 | * Add support for the AArch64 Cortex-A34, Cortex-A65, Cortex-A65AE, | |
15 | Cortex-A76AE, and Cortex-A77 processors. | |
16 | ||
f974f26c NC |
17 | Changes in 2.32: |
18 | ||
03751133 L |
19 | * Add -mvexwig=[0|1] option to x86 assembler to control encoding of |
20 | VEX.W-ignored (WIG) VEX instructions. | |
21 | ||
b4a3a7b4 L |
22 | * Add -mx86-used-note=[yes|no] option to generate (or not) x86 GNU property |
23 | notes. Add a --enable-x86-used-note configure time option to set the | |
24 | default behavior. Set the default if the configure option is not used | |
25 | to "no". | |
26 | ||
a693765e CX |
27 | * Add support for the MIPS Loongson EXTensions R2 (EXT2) instructions. |
28 | ||
bdc6c06e CX |
29 | * Add support for the MIPS Loongson EXTensions (EXT) instructions. |
30 | ||
716c08de CX |
31 | * Add support for the MIPS Loongson Content Address Memory (CAM) ASE. |
32 | ||
b8891f8d AJ |
33 | * Add support for the C-SKY processor series. |
34 | ||
8095d2f7 CX |
35 | * Add support for the MIPS Loongson MultiMedia extensions Instructions (MMI) |
36 | ASE. | |
37 | ||
719d8288 NC |
38 | Changes in 2.31: |
39 | ||
fc6141f0 NC |
40 | * The ADR and ADRL pseudo-instructions supported by the ARM assembler |
41 | now only set the bottom bit of the address of thumb function symbols | |
42 | if the -mthumb-interwork command line option is active. | |
43 | ||
6f20c942 FS |
44 | * Add support for the MIPS Global INValidate (GINV) ASE. |
45 | ||
730c3174 SE |
46 | * Add support for the MIPS Cyclic Redudancy Check (CRC) ASE. |
47 | ||
7b4ae824 JD |
48 | * Add support for the Freescale S12Z architecture. |
49 | ||
0df8ad28 NC |
50 | * Add --generate-missing-build-notes=[yes|no] option to create (or not) GNU |
51 | Build Attribute notes if none are present in the input sources. Add a | |
52 | --enable-generate-build-notes=[yes|no] configure time option to set the | |
53 | default behaviour. Set the default if the configure option is not used | |
54 | to "no". | |
55 | ||
bd5dea88 L |
56 | * Remove -mold-gcc command-line option for x86 targets. |
57 | ||
b6f8c7c4 L |
58 | * Add -O[2|s] command-line options to x86 assembler to enable alternate |
59 | shorter instruction encoding. | |
60 | ||
8f065d3b | 61 | * Add support for .nops directive. It is currently supported only for |
62a02d25 L |
62 | x86 targets. |
63 | ||
9176ac5b NC |
64 | Changes in 2.30: |
65 | ||
ba8826a8 AO |
66 | * Add support for loaction views in DWARF debug line information. |
67 | ||
55a09eb6 TG |
68 | Changes in 2.29: |
69 | ||
a91e1603 L |
70 | * Add support for ELF SHF_GNU_MBIND. |
71 | ||
f96bd6c2 PC |
72 | * Add support for the WebAssembly file format and wasm32 ELF conversion. |
73 | ||
7e0de605 | 74 | * PowerPC gas now checks that the correct register class is used in |
ece5dcc1 AM |
75 | instructions. For instance, "addi %f4,%cr3,%r31" warns three times |
76 | that the registers are invalid. | |
7e0de605 | 77 | |
93f11b16 DD |
78 | * Add support for the Texas Instruments PRU processor. |
79 | ||
0cda1e19 TP |
80 | * Support for the ARMv8-R architecture and Cortex-R52 processor has been |
81 | added to the ARM port. | |
ced40572 | 82 | |
9703a4ef TG |
83 | Changes in 2.28: |
84 | ||
e23eba97 NC |
85 | * Add support for the RISC-V architecture. |
86 | ||
b19ea8d2 | 87 | * Add support for the ARM Cortex-M23 and Cortex-M33 processors. |
ce1b0a45 | 88 | |
96a84ea3 TG |
89 | Changes in 2.27: |
90 | ||
4e3e1fdf L |
91 | * Default to --enable-compressed-debug-sections=gas for Linux/x86 targets. |
92 | ||
2edb36e7 NC |
93 | * Add --no-pad-sections to stop the assembler from padding the end of output |
94 | sections up to their alignment boundary. | |
95 | ||
15afaa63 TP |
96 | * Support for the ARMv8-M architecture has been added to the ARM port. Support |
97 | for the ARMv8-M Security and DSP Extensions has also been added to the ARM | |
98 | port. | |
99 | ||
f36e33da CZ |
100 | * ARC backend accepts .extInstruction, .extCondCode, .extAuxRegister, and |
101 | .extCoreRegister pseudo-ops that allow an user to define custom | |
102 | instructions, conditional codes, auxiliary and core registers. | |
103 | ||
b8871f35 L |
104 | * Add a configure option --enable-elf-stt-common to decide whether ELF |
105 | assembler should generate common symbols with the STT_COMMON type by | |
106 | default. Default to no. | |
107 | ||
a05a5b64 | 108 | * New command-line option --elf-stt-common= for ELF targets to control |
b8871f35 L |
109 | whether to generate common symbols with the STT_COMMON type. |
110 | ||
9fb71ee4 NC |
111 | * Add ability to set section flags and types via numeric values for ELF |
112 | based targets. | |
81c23f82 | 113 | |
0cb4071e L |
114 | * Add a configure option --enable-x86-relax-relocations to decide whether |
115 | x86 assembler should generate relax relocations by default. Default to | |
116 | yes, except for x86 Solaris targets older than Solaris 12. | |
117 | ||
a05a5b64 | 118 | * New command-line option -mrelax-relocations= for x86 target to control |
0cb4071e L |
119 | whether to generate relax relocations. |
120 | ||
a05a5b64 | 121 | * New command-line option -mfence-as-lock-add=yes for x86 target to encode |
9d3fc4e1 L |
122 | lfence, mfence and sfence as "lock addl $0x0, (%[re]sp)". |
123 | ||
4670103e CZ |
124 | * Add assembly-time relaxation option for ARC cpus. |
125 | ||
9004b6bd AB |
126 | * Add --with-cpu=TYPE configure option for ARC gas. This allows the default |
127 | cpu type to be adjusted at configure time. | |
128 | ||
7feec526 TG |
129 | Changes in 2.26: |
130 | ||
edeefb67 L |
131 | * Add a configure option --enable-compressed-debug-sections={all,gas} to |
132 | decide whether DWARF debug sections should be compressed by default. | |
e12fe555 | 133 | |
886a2506 NC |
134 | * Add support for the ARC EM/HS, and ARC600/700 architectures. Remove |
135 | assembler support for Argonaut RISC architectures. | |
136 | ||
d02603dc NC |
137 | * Symbol and label names can now be enclosed in double quotes (") which allows |
138 | them to contain characters that are not part of valid symbol names in high | |
139 | level languages. | |
140 | ||
f33026a9 MW |
141 | * Added the correctly spelled -march=armv6kz, for ARMv6KZ support. The |
142 | previous spelling, -march=armv6zk, is still accepted. | |
143 | ||
88f0ea34 MW |
144 | * Support for the ARMv8.1 architecture has been added to the Aarch64 port. |
145 | Support for the individual ARMv8.1 Adv.SIMD, LOR and PAN architecture | |
146 | extensions has also been added to the Aarch64 port. | |
147 | ||
a5932920 MW |
148 | * Support for the ARMv8.1 architecture has been added to the ARM port. Support |
149 | for the individual ARMv8.1 Adv.SIMD and PAN architecture extensions has also | |
150 | been added to the ARM port. | |
151 | ||
ea556d25 L |
152 | * Extend --compress-debug-sections option to support |
153 | --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi] for ELF | |
154 | targets. | |
155 | ||
0d2b51ad L |
156 | * --compress-debug-sections is turned on for Linux/x86 by default. |
157 | ||
c50415e2 TG |
158 | Changes in 2.25: |
159 | ||
f36e8886 BS |
160 | * Add support for the AVR Tiny microcontrollers. |
161 | ||
73589c9d CS |
162 | * Replace support for openrisc and or32 with support for or1k. |
163 | ||
2e6976a8 | 164 | * Enhanced the ARM port to accept the assembler output from the CodeComposer |
a05a5b64 | 165 | Studio tool. Support is enabled via the new command-line option -mccs. |
2e6976a8 | 166 | |
35c08157 KLC |
167 | * Add support for the Andes NDS32. |
168 | ||
58ca03a2 TG |
169 | Changes in 2.24: |
170 | ||
13761a11 NC |
171 | * Add support for the Texas Instruments MSP430X processor. |
172 | ||
a05a5b64 | 173 | * Add -gdwarf-sections command-line option to enable per-code-section |
b40bf0a2 NC |
174 | generation of DWARF .debug_line sections. |
175 | ||
36591ba1 SL |
176 | * Add support for Altera Nios II. |
177 | ||
a3c62988 NC |
178 | * Add support for the Imagination Technologies Meta processor. |
179 | ||
5bf135a7 NC |
180 | * Add support for the v850e3v5. |
181 | ||
e8044f35 RS |
182 | * Remove assembler support for MIPS ECOFF targets. |
183 | ||
af18cb59 TG |
184 | Changes in 2.23: |
185 | ||
da2bb560 NC |
186 | * Add support for the 64-bit ARM architecture: AArch64. |
187 | ||
6927f982 NC |
188 | * Add support for S12X processor. |
189 | ||
b9c361e0 JL |
190 | * Add support for the VLE extension to the PowerPC architecture. |
191 | ||
f6c1a2d5 NC |
192 | * Add support for the Freescale XGATE architecture. |
193 | ||
fa94de6b RM |
194 | * Add support for .bundle_align_mode, .bundle_lock, and .bundle_unlock |
195 | directives. These are currently available only for x86 and ARM targets. | |
196 | ||
99c513f6 DD |
197 | * Add support for the Renesas RL78 architecture. |
198 | ||
cfb8c092 NC |
199 | * Add support for the Adapteva EPIPHANY architecture. |
200 | ||
fe13e45b | 201 | * For x86, allow 'rep bsf', 'rep bsr', and 'rep ret' syntax. |
29c048b6 | 202 | |
a7142d94 TG |
203 | Changes in 2.22: |
204 | ||
69f56ae1 | 205 | * Add support for the Tilera TILEPro and TILE-Gx architectures. |
44f45767 | 206 | |
90b3661c | 207 | Changes in 2.21: |
44f45767 | 208 | |
5fec8599 L |
209 | * Gas no longer requires doubling of ampersands in macros. |
210 | ||
40b36596 JM |
211 | * Add support for the TMS320C6000 (TI C6X) processor family. |
212 | ||
31907d5e DK |
213 | * GAS now understands an extended syntax in the .section directive flags |
214 | for COFF targets that allows the section's alignment to be specified. This | |
215 | feature has also been backported to the 2.20 release series, starting with | |
216 | 2.20.1. | |
217 | ||
c7927a3c NC |
218 | * Add support for the Renesas RX processor. |
219 | ||
a05a5b64 | 220 | * New command-line option, --compress-debug-sections, which requests |
700c4060 CC |
221 | compression of DWARF debug information sections in the relocatable output |
222 | file. Compressed debug sections are supported by readelf, objdump, and | |
223 | gold, but not currently by Gnu ld. | |
224 | ||
81c23f82 TG |
225 | Changes in 2.20: |
226 | ||
1cd986c5 NC |
227 | * Added support for v850e2 and v850e2v3. |
228 | ||
3e7a7d11 NC |
229 | * GNU/Linux targets now supports "gnu_unique_object" as a value in the .type |
230 | pseudo op. It marks the symbol as being globally unique in the entire | |
231 | process. | |
232 | ||
c921be7d NC |
233 | * ARM assembler now supports .inst[.nw] pseudo-ops to insert opcodes specified |
234 | in binary rather than text. | |
6e33da12 | 235 | |
c1711530 DK |
236 | * Add support for common symbol alignment to PE formats. |
237 | ||
92846e72 CC |
238 | * Add support for the new discriminator column in the DWARF line table, |
239 | with a discriminator operand for the .loc directive. | |
240 | ||
c3b7224a NC |
241 | * Add support for Sunplus score architecture. |
242 | ||
d8045f23 NC |
243 | * The .type pseudo-op now accepts a type of STT_GNU_IFUNC which can be used to |
244 | indicate that if the symbol is the target of a relocation, its value should | |
245 | not be use. Instead the function should be invoked and its result used as | |
246 | the value. | |
fa94de6b | 247 | |
84e94c90 NC |
248 | * Add support for Lattice Mico32 (lm32) architecture. |
249 | ||
fa94de6b | 250 | * Add support for Xilinx MicroBlaze architecture. |
caa03924 | 251 | |
6e33da12 TG |
252 | Changes in 2.19: |
253 | ||
4f6d9c90 DJ |
254 | * New pseudo op .cfi_val_encoded_addr, to record constant addresses in unwind |
255 | tables without runtime relocation. | |
256 | ||
a05a5b64 | 257 | * New command-line option, -h-tick-hex, for sh, m32c, and h8/300 targets, which |
6fd4f6cc DD |
258 | adds compatibility with H'00 style hex constants. |
259 | ||
a05a5b64 | 260 | * New command-line option, -msse-check=[none|error|warning], for x86 |
daf50ae7 L |
261 | targets. |
262 | ||
a05a5b64 | 263 | * New sub-option added to the assembler's -a command-line switch to |
83f10cb2 NC |
264 | generate a listing output. The 'g' sub-option will insert into the listing |
265 | various information about the assembly, such as assembler version, the | |
a05a5b64 | 266 | command-line options used, and a time stamp. |
83f10cb2 | 267 | |
a05a5b64 | 268 | * New command-line option -msse2avx for x86 target to encode SSE |
c0f3af97 L |
269 | instructions with VEX prefix. |
270 | ||
f1f8f695 | 271 | * Add Intel XSAVE, EPT, MOVBE, AES, PCLMUL, AVX/FMA support for x86 target. |
c0f3af97 | 272 | |
a05a5b64 | 273 | * New command-line options, -march=CPU[,+EXTENSION...], -mtune=CPU, |
ae40c993 L |
274 | -mmnemonic=[att|intel], -msyntax=[att|intel], -mindex-reg, |
275 | -mnaked-reg and -mold-gcc, for x86 targets. | |
276 | ||
38a57ae7 NC |
277 | * Support for generating wide character strings has been added via the new |
278 | pseudo ops: .string16, .string32 and .string64. | |
279 | ||
85f10a01 MM |
280 | * Support for SSE5 has been added to the i386 port. |
281 | ||
7c3d153f NC |
282 | Changes in 2.18: |
283 | ||
ec2655a6 NC |
284 | * The GAS sources are now released under the GPLv3. |
285 | ||
3d3d428f NC |
286 | * Support for the National Semiconductor CR16 target has been added. |
287 | ||
3f9ce309 AM |
288 | * Added gas .reloc pseudo. This is a low-level interface for creating |
289 | relocations. | |
290 | ||
99ad8390 NC |
291 | * Add support for x86_64 PE+ target. |
292 | ||
1c0d3aa6 | 293 | * Add support for Score target. |
83518699 | 294 | |
ec2655a6 NC |
295 | Changes in 2.17: |
296 | ||
d70c5fc7 NC |
297 | * Support for the Infineon XC16X has been added by KPIT Cummins Infosystems. |
298 | ||
08333dc4 NS |
299 | * Support for ms2 architecture has been added. |
300 | ||
b7b8fb1d NC |
301 | * Support for the Z80 processor family has been added. |
302 | ||
3e8a519c MM |
303 | * Add support for the "@<file>" syntax to the command line, so that extra |
304 | switches can be read from <file>. | |
305 | ||
a05a5b64 | 306 | * The SH target supports a new command-line switch --enable-reg-prefix which, |
37dedf66 NC |
307 | if enabled, will allow register names to be optionally prefixed with a $ |
308 | character. This allows register names to be distinguished from label names. | |
fa94de6b | 309 | |
6eaeac8a JB |
310 | * Macros with a variable number of arguments are now supported. See the |
311 | documentation for how this works. | |
312 | ||
4bdd3565 NC |
313 | * Added --reduce-memory-overheads switch to reduce the size of the hash |
314 | tables used, at the expense of longer assembly times, and | |
315 | --hash-size=<NUMBER> to set the size of the hash tables used by gas. | |
316 | ||
5e75c3ab JB |
317 | * Macro names and macro parameter names can now be any identifier that would |
318 | also be legal as a symbol elsewhere. For macro parameter names, this is | |
319 | known to cause problems in certain sources when the respective target uses | |
320 | characters inconsistently, and thus macro parameter references may no longer | |
321 | be recognized as such (see the documentation for details). | |
fa94de6b | 322 | |
d2c5f73e NC |
323 | * Support the .f_floating, .d_floating, .g_floating and .h_floating directives |
324 | for the VAX target in order to be more compatible with the VAX MACRO | |
325 | assembler. | |
326 | ||
a05a5b64 | 327 | * New command-line option -mtune=[itanium1|itanium2] for IA64 targets. |
8c2fda1d | 328 | |
957d91c1 NC |
329 | Changes in 2.16: |
330 | ||
fffeaa5f JB |
331 | * Redefinition of macros now results in an error. |
332 | ||
a05a5b64 | 333 | * New command-line option -mhint.b=[ok|warning|error] for IA64 targets. |
91d777ee | 334 | |
a05a5b64 | 335 | * New command-line option -munwind-check=[warning|error] for IA64 |
970d6792 L |
336 | targets. |
337 | ||
f1dab70d JB |
338 | * The IA64 port now uses automatic dependency violation removal as its default |
339 | mode. | |
340 | ||
7499d566 NC |
341 | * Port to MAXQ processor contributed by HCL Tech. |
342 | ||
7ed4c4c5 NC |
343 | * Added support for generating unwind tables for ARM ELF targets. |
344 | ||
a05a5b64 | 345 | * Add a -g command-line option to generate debug information in the target's |
329e276d NC |
346 | preferred debug format. |
347 | ||
1fe1f39c NC |
348 | * Support for the crx-elf target added. |
349 | ||
1a320fbb | 350 | * Support for the sh-symbianelf target added. |
1fe1f39c | 351 | |
0503b355 BF |
352 | * Added a pseudo-op (.secrel32) to generate 32 bit section relative relocations |
353 | on pe[i]-i386; required for this target's DWARF 2 support. | |
354 | ||
6b6e92f4 NC |
355 | * Support for Motorola MCF521x/5249/547x/548x added. |
356 | ||
fd99574b NC |
357 | * Support for ColdFire EMAC instructions added and Motorola syntax for MAC/EMAC |
358 | instrucitons. | |
359 | ||
a05a5b64 | 360 | * New command-line option -mno-shared for MIPS ELF targets. |
aa6975fb | 361 | |
a05a5b64 | 362 | * New command-line option --alternate and pseudo-ops .altmacro and .noaltmacro |
caa32fe5 NC |
363 | added to enter (and leave) alternate macro syntax mode. |
364 | ||
0477af35 NC |
365 | Changes in 2.15: |
366 | ||
7a7f4e42 CD |
367 | * The MIPS -membedded-pic option (Embedded-PIC code generation) is |
368 | deprecated and will be removed in a future release. | |
369 | ||
6edf0760 NC |
370 | * Added PIC m32r Linux (ELF) and support to M32R assembler. |
371 | ||
09d92015 MM |
372 | * Added support for ARM V6. |
373 | ||
88da98f3 MS |
374 | * Added support for sh4a and variants. |
375 | ||
eb764db8 NC |
376 | * Support for Renesas M32R2 added. |
377 | ||
88da98f3 MS |
378 | * Limited support for Mapping Symbols as specified in the ARM ELF |
379 | specification has been added to the arm assembler. | |
ed769ec1 | 380 | |
0bbf2aa4 NC |
381 | * On ARM architectures, added a new gas directive ".unreq" that undoes |
382 | definitions created by ".req". | |
383 | ||
3e602632 NC |
384 | * Support for Motorola ColdFire MCF528x added. |
385 | ||
05da4302 NC |
386 | * Added --gstabs+ switch to enable the generation of STABS debug format |
387 | information with GNU extensions. | |
fa94de6b | 388 | |
6a265366 CD |
389 | * Added support for MIPS64 Release 2. |
390 | ||
8ad30312 NC |
391 | * Added support for v850e1. |
392 | ||
12b55ccc L |
393 | * Added -n switch for x86 assembler. By default, x86 GAS replaces |
394 | multiple nop instructions used for alignment within code sections | |
395 | with multi-byte nop instructions such as leal 0(%esi,1),%esi. This | |
396 | switch disables the optimization. | |
397 | ||
78849248 ILT |
398 | * Removed -n option from MIPS assembler. It was not useful, and confused the |
399 | existing -non_shared option. | |
400 | ||
43c58ae6 CD |
401 | Changes in 2.14: |
402 | ||
69be0a2b CD |
403 | * Added support for MIPS32 Release 2. |
404 | ||
e8fd7476 NC |
405 | * Added support for Xtensa architecture. |
406 | ||
e16bb312 NC |
407 | * Support for Intel's iWMMXt processor (an ARM variant) added. |
408 | ||
cce4814f NC |
409 | * An assembler test generator has been contributed and an example file that |
410 | uses it (gas/testsuite/gas/all/test-gen.c and test-exmaple.c). | |
fa94de6b | 411 | |
5177500f NC |
412 | * Support for SH2E added. |
413 | ||
fea17916 NC |
414 | * GASP has now been removed. |
415 | ||
004d9caf NC |
416 | * Support for Texas Instruments TMS320C4x and TMS320C3x series of |
417 | DSP's contributed by Michael Hayes and Svein E. Seldal. | |
fa94de6b | 418 | |
a40cbfa3 NC |
419 | * Support for the Ubicom IP2xxx microcontroller added. |
420 | ||
2cbb2eef NC |
421 | Changes in 2.13: |
422 | ||
a40cbfa3 NC |
423 | * Support for the Fujitsu FRV architecture added by Red Hat. Models for FR400 |
424 | and FR500 included. | |
0ebb9a87 | 425 | |
a40cbfa3 | 426 | * Support for DLX processor added. |
52216602 | 427 | |
a40cbfa3 NC |
428 | * GASP has now been deprecated and will be removed in a future release. Use |
429 | the macro facilities in GAS instead. | |
3f965e60 | 430 | |
a40cbfa3 NC |
431 | * GASP now correctly parses floating point numbers. Unless the base is |
432 | explicitly specified, they are interpreted as decimal numbers regardless of | |
433 | the currently specified base. | |
1ac57253 | 434 | |
9a66911f NC |
435 | Changes in 2.12: |
436 | ||
a40cbfa3 | 437 | * Support for Don Knuth's MMIX, by Hans-Peter Nilsson. |
49fda6c8 | 438 | |
a40cbfa3 | 439 | * Support for the OpenRISC 32-bit embedded processor by OpenCores. |
3b16e843 | 440 | |
fa94de6b RM |
441 | * The ARM assembler now accepts -march=..., -mcpu=... and -mfpu=... for |
442 | specifying the target instruction set. The old method of specifying the | |
a40cbfa3 NC |
443 | target processor has been deprecated, but is still accepted for |
444 | compatibility. | |
03b1477f | 445 | |
a40cbfa3 NC |
446 | * Support for the VFP floating-point instruction set has been added to |
447 | the ARM assembler. | |
252b5132 | 448 | |
a40cbfa3 NC |
449 | * New psuedo op: .incbin to include a set of binary data at a given point |
450 | in the assembly. Contributed by Anders Norlander. | |
7e005732 | 451 | |
a40cbfa3 NC |
452 | * The MIPS assembler now accepts -march/-mtune. -mcpu has been deprecated |
453 | but still works for compatability. | |
ec68c924 | 454 | |
fa94de6b | 455 | * The MIPS assembler no longer issues a warning by default when it |
a05a5b64 | 456 | generates a nop instruction from a macro. The new command-line option |
a40cbfa3 | 457 | -n will turn on the warning. |
63486801 | 458 | |
2dac7317 JW |
459 | Changes in 2.11: |
460 | ||
500800ca NC |
461 | * Support for PDP-11 and 2.11BSD a.out format, by Lars Brinkhoff. |
462 | ||
a40cbfa3 | 463 | * x86 gas now supports the full Pentium4 instruction set. |
a167610d | 464 | |
a40cbfa3 | 465 | * Support for AMD x86-64 architecture, by Jan Hubicka, SuSE Labs. |
c0d8940f | 466 | |
a40cbfa3 | 467 | * Support for Motorola 68HC11 and 68HC12. |
df86943d | 468 | |
a40cbfa3 | 469 | * Support for Texas Instruments TMS320C54x (tic54x). |
39bec121 | 470 | |
a40cbfa3 | 471 | * Support for IA-64. |
2dac7317 | 472 | |
a40cbfa3 | 473 | * Support for i860, by Jason Eckhardt. |
22b36938 | 474 | |
a40cbfa3 | 475 | * Support for CRIS (Axis Communications ETRAX series). |
5bcac8a4 | 476 | |
a40cbfa3 | 477 | * x86 gas has a new .arch pseudo op to specify the target CPU architecture. |
a38cf1db | 478 | |
a05a5b64 | 479 | * x86 gas -q command-line option quietens warnings about register size changes |
a40cbfa3 NC |
480 | due to suffix, indirect jmp/call without `*', stand-alone prefixes, and |
481 | translating various deprecated floating point instructions. | |
a38cf1db | 482 | |
252b5132 RH |
483 | Changes in 2.10: |
484 | ||
a40cbfa3 NC |
485 | * Support for the ARM msr instruction was changed to only allow an immediate |
486 | operand when altering the flags field. | |
d14442f4 | 487 | |
a40cbfa3 | 488 | * Support for ATMEL AVR. |
adde6300 | 489 | |
a40cbfa3 | 490 | * Support for IBM 370 ELF. Somewhat experimental. |
b5ebe70e | 491 | |
a40cbfa3 | 492 | * Support for numbers with suffixes. |
3fd9f047 | 493 | |
a40cbfa3 | 494 | * Added support for breaking to the end of repeat loops. |
6a6987a9 | 495 | |
a40cbfa3 | 496 | * Added support for parallel instruction syntax (DOUBLEBAR_PARALLEL). |
6a6987a9 | 497 | |
a40cbfa3 | 498 | * New .elseif pseudo-op added. |
3fd9f047 | 499 | |
a40cbfa3 | 500 | * New --fatal-warnings option. |
1f776aa5 | 501 | |
a40cbfa3 | 502 | * picoJava architecture support added. |
252b5132 | 503 | |
a40cbfa3 | 504 | * Motorola MCore 210 processor support added. |
041dd5a9 | 505 | |
fa94de6b | 506 | * A new pseudo-op .intel_syntax has been implemented to allow gas to parse i386 |
a40cbfa3 | 507 | assembly programs with intel syntax. |
252b5132 | 508 | |
a40cbfa3 | 509 | * New pseudo-ops .func,.endfunc to aid in debugging user-written assembler code. |
252b5132 | 510 | |
a40cbfa3 | 511 | * Added -gdwarf2 option to generate DWARF 2 debugging information. |
041dd5a9 | 512 | |
a40cbfa3 | 513 | * Full 16-bit mode support for i386. |
252b5132 | 514 | |
fa94de6b | 515 | * Greatly improved instruction operand checking for i386. This change will |
a40cbfa3 NC |
516 | produce errors or warnings on incorrect assembly code that previous versions |
517 | of gas accepted. If you get unexpected messages from code that worked with | |
518 | older versions of gas, please double check the code before reporting a bug. | |
252b5132 | 519 | |
a40cbfa3 | 520 | * Weak symbol support added for COFF targets. |
252b5132 | 521 | |
a40cbfa3 | 522 | * Mitsubishi D30V support added. |
252b5132 | 523 | |
a40cbfa3 | 524 | * Texas Instruments c80 (tms320c80) support added. |
252b5132 | 525 | |
a40cbfa3 | 526 | * i960 ELF support added. |
bedf545c | 527 | |
a40cbfa3 | 528 | * ARM ELF support added. |
a057431b | 529 | |
252b5132 RH |
530 | Changes in 2.9: |
531 | ||
a40cbfa3 | 532 | * Texas Instruments c30 (tms320c30) support added. |
252b5132 | 533 | |
fa94de6b | 534 | * The assembler now optimizes the exception frame information generated by egcs |
a40cbfa3 | 535 | and gcc 2.8. The new --traditional-format option disables this optimization. |
252b5132 | 536 | |
a40cbfa3 | 537 | * Added --gstabs option to generate stabs debugging information. |
252b5132 | 538 | |
fa94de6b | 539 | * The -a option takes a new suboption, m (e.g., -alm) to expand macros in a |
a40cbfa3 | 540 | listing. |
252b5132 | 541 | |
a40cbfa3 | 542 | * Added -MD option to print dependencies. |
252b5132 RH |
543 | |
544 | Changes in 2.8: | |
545 | ||
a40cbfa3 | 546 | * BeOS support added. |
252b5132 | 547 | |
a40cbfa3 | 548 | * MIPS16 support added. |
252b5132 | 549 | |
a40cbfa3 | 550 | * Motorola ColdFire 5200 support added (configure for m68k and use -m5200). |
252b5132 | 551 | |
a40cbfa3 | 552 | * Alpha/VMS support added. |
252b5132 | 553 | |
a40cbfa3 NC |
554 | * m68k options --base-size-default-16, --base-size-default-32, |
555 | --disp-size-default-16, and --disp-size-default-32 added. | |
252b5132 | 556 | |
a40cbfa3 NC |
557 | * The alignment directives now take an optional third argument, which is the |
558 | maximum number of bytes to skip. If doing the alignment would require | |
559 | skipping more than the given number of bytes, the alignment is not done at | |
560 | all. | |
252b5132 | 561 | |
a40cbfa3 | 562 | * The ELF assembler has a new pseudo-op, .symver, used for symbol versioning. |
252b5132 | 563 | |
a40cbfa3 NC |
564 | * The -a option takes a new suboption, c (e.g., -alc), to skip false |
565 | conditionals in listings. | |
252b5132 | 566 | |
a40cbfa3 NC |
567 | * Added new pseudo-op, .equiv; it's like .equ, except that it is an error if |
568 | the symbol is already defined. | |
252b5132 RH |
569 | |
570 | Changes in 2.7: | |
571 | ||
a40cbfa3 NC |
572 | * The PowerPC assembler now allows the use of symbolic register names (r0, |
573 | etc.) if -mregnames is used. Symbolic names preceded by a '%' (%r0, etc.) | |
574 | can be used any time. PowerPC 860 move to/from SPR instructions have been | |
575 | added. | |
252b5132 | 576 | |
a40cbfa3 | 577 | * Alpha Linux (ELF) support added. |
252b5132 | 578 | |
a40cbfa3 | 579 | * PowerPC ELF support added. |
252b5132 | 580 | |
a40cbfa3 | 581 | * m68k Linux (ELF) support added. |
252b5132 | 582 | |
a40cbfa3 | 583 | * i960 Hx/Jx support added. |
252b5132 | 584 | |
a40cbfa3 | 585 | * i386/PowerPC gnu-win32 support added. |
252b5132 | 586 | |
a40cbfa3 NC |
587 | * SCO ELF support added. For OpenServer 5 targets (i386-unknown-sco3.2v5) the |
588 | default is to build COFF-only support. To get a set of tools that generate | |
fa94de6b | 589 | ELF (they'll understand both COFF and ELF), you must configure with |
a40cbfa3 | 590 | target=i386-unknown-sco3.2v5elf. |
252b5132 | 591 | |
a40cbfa3 | 592 | * m88k-motorola-sysv3* support added. |
252b5132 RH |
593 | |
594 | Changes in 2.6: | |
595 | ||
a40cbfa3 | 596 | * Gas now directly supports macros, without requiring GASP. |
252b5132 | 597 | |
a40cbfa3 NC |
598 | * Gas now has an MRI assembler compatibility mode. Use -M or --mri to select |
599 | MRI mode. The pseudo-op ``.mri 1'' will switch into the MRI mode until the | |
600 | ``.mri 0'' is seen; this can be convenient for inline assembler code. | |
252b5132 | 601 | |
a40cbfa3 | 602 | * Added --defsym SYM=VALUE option. |
252b5132 | 603 | |
a40cbfa3 | 604 | * Added -mips4 support to MIPS assembler. |
252b5132 | 605 | |
a40cbfa3 | 606 | * Added PIC support to Solaris and SPARC SunOS 4 assembler. |
252b5132 RH |
607 | |
608 | Changes in 2.4: | |
609 | ||
a40cbfa3 | 610 | * Converted this directory to use an autoconf-generated configure script. |
252b5132 | 611 | |
a40cbfa3 | 612 | * ARM support, from Richard Earnshaw. |
252b5132 | 613 | |
a40cbfa3 NC |
614 | * Updated VMS support, from Pat Rankin, including considerably improved |
615 | debugging support. | |
252b5132 | 616 | |
a40cbfa3 | 617 | * Support for the control registers in the 68060. |
252b5132 | 618 | |
a40cbfa3 | 619 | * Handles (ignores) a new directive ".this_GCC_requires_the_GNU_assembler", to |
fa94de6b RM |
620 | provide for possible future gcc changes, for targets where gas provides some |
621 | features not available in the native assembler. If the native assembler is | |
a40cbfa3 | 622 | used, it should become obvious pretty quickly what the problem is. |
252b5132 | 623 | |
a40cbfa3 | 624 | * Usage message is available with "--help". |
252b5132 | 625 | |
fa94de6b | 626 | * The GNU Assembler Preprocessor (gasp) is included. (Actually, it was in 2.3 |
a40cbfa3 | 627 | also, but didn't get into the NEWS file.) |
252b5132 | 628 | |
a40cbfa3 | 629 | * Weak symbol support for a.out. |
252b5132 | 630 | |
fa94de6b | 631 | * A bug in the listing code which could cause an infinite loop has been fixed. |
a40cbfa3 | 632 | Bugs in listings when generating a COFF object file have also been fixed. |
252b5132 | 633 | |
a40cbfa3 NC |
634 | * Initial i386-svr4 PIC implementation from Eric Youngdale, based on code by |
635 | Paul Kranenburg. | |
252b5132 | 636 | |
a40cbfa3 NC |
637 | * Improved Alpha support. Immediate constants can have a much larger range |
638 | now. Support for the 21164 has been contributed by Digital. | |
252b5132 | 639 | |
a40cbfa3 | 640 | * Updated ns32k (pc532-mach, netbsd532) support from Ian Dall. |
252b5132 RH |
641 | |
642 | Changes in 2.3: | |
643 | ||
a40cbfa3 | 644 | * Mach i386 support, by David Mackenzie and Ken Raeburn. |
252b5132 | 645 | |
a40cbfa3 | 646 | * RS/6000 and PowerPC support by Ian Taylor. |
252b5132 | 647 | |
a40cbfa3 NC |
648 | * VMS command scripts (make-gas.com, config-gas.com) have been worked on a bit, |
649 | based on mail received from various people. The `-h#' option should work | |
650 | again too. | |
252b5132 | 651 | |
a40cbfa3 | 652 | * HP-PA work, by Jeff Law. Note, for the PA, gas-2.3 has been designed to work |
fa94de6b | 653 | with gdb-4.12 and gcc-2.6. As gcc-2.6 has not been released yet, a special |
a40cbfa3 NC |
654 | version of gcc-2.5.8 has been patched to work with gas-2.3. You can retrieve |
655 | this special version of gcc-2.5.8 via anonymous ftp from jaguar.cs.utah.edu | |
656 | in the "dist" directory. | |
252b5132 | 657 | |
a40cbfa3 NC |
658 | * Vax support in gas fixed for BSD, so it builds and seems to run a couple |
659 | simple tests okay. I haven't put it through extensive testing. (GNU make is | |
660 | currently required for BSD 4.3 builds.) | |
252b5132 | 661 | |
fa94de6b | 662 | * Support for the DEC Alpha, running OSF/1 (ECOFF format). The gas support is |
a40cbfa3 NC |
663 | based on code donated by CMU, which used an a.out-based format. I'm afraid |
664 | the alpha-a.out support is pretty badly mangled, and much of it removed; | |
665 | making it work will require rewriting it as BFD support for the format anyways. | |
252b5132 | 666 | |
a40cbfa3 | 667 | * Irix 5 support. |
252b5132 | 668 | |
fa94de6b | 669 | * The test suites have been fixed up a bit, so that they should work with a |
a40cbfa3 | 670 | couple different versions of expect and dejagnu. |
252b5132 | 671 | |
fa94de6b RM |
672 | * Symbols' values are now handled internally as expressions, permitting more |
673 | flexibility in evaluating them in some cases. Some details of relocation | |
a40cbfa3 NC |
674 | handling have also changed, and simple constant pool management has been |
675 | added, to make the Alpha port easier. | |
252b5132 | 676 | |
a40cbfa3 NC |
677 | * New option "--statistics" for printing out program run times. This is |
678 | intended to be used with the gcc "-Q" option, which prints out times spent in | |
679 | various phases of compilation. (You should be able to get all of them | |
680 | printed out with "gcc -Q -Wa,--statistics", I think.) | |
252b5132 RH |
681 | |
682 | Changes in 2.2: | |
683 | ||
a40cbfa3 | 684 | * RS/6000 AIX and MIPS SGI Irix 5 support has been added. |
252b5132 | 685 | |
fa94de6b RM |
686 | * Configurations that are still in development (and therefore are convenient to |
687 | have listed in configure.in) still get rejected without a minor change to | |
a40cbfa3 NC |
688 | gas/Makefile.in, so people not doing development work shouldn't get the |
689 | impression that support for such configurations is actually believed to be | |
690 | reliable. | |
252b5132 | 691 | |
fa94de6b | 692 | * The program name (usually "as") is printed when a fatal error message is |
a40cbfa3 NC |
693 | displayed. This should prevent some confusion about the source of occasional |
694 | messages about "internal errors". | |
252b5132 | 695 | |
fa94de6b | 696 | * ELF support is falling into place. Support for the 386 should be working. |
a40cbfa3 | 697 | Support for SPARC Solaris is in. HPPA support from Utah is being integrated. |
252b5132 | 698 | |
a40cbfa3 NC |
699 | * Symbol values are maintained as expressions instead of being immediately |
700 | boiled down to add-symbol, sub-symbol, and constant. This permits slightly | |
701 | more complex calculations involving symbols whose values are not alreadey | |
702 | known. | |
252b5132 | 703 | |
a40cbfa3 | 704 | * DBX-style debugging info ("stabs") is now supported for COFF formats. |
fa94de6b RM |
705 | If any stabs directives are seen in the source, GAS will create two new |
706 | sections: a ".stab" and a ".stabstr" section. The format of the .stab | |
a40cbfa3 NC |
707 | section is nearly identical to the a.out symbol format, and .stabstr is |
708 | its string table. For this to be useful, you must have configured GCC | |
709 | to generate stabs (by defining DBX_DEBUGGING_INFO), and must have a GDB | |
710 | that can use the stab sections (4.11 or later). | |
252b5132 | 711 | |
fa94de6b | 712 | * LynxOS, on i386 and m68k platforms, is now supported. SPARC LynxOS |
a40cbfa3 | 713 | support is in progress. |
252b5132 RH |
714 | |
715 | Changes in 2.1: | |
716 | ||
fa94de6b | 717 | * Several small fixes for i386-aix (PS/2) support from Minh Tran-Le have been |
a40cbfa3 | 718 | incorporated, but not well tested yet. |
252b5132 | 719 | |
fa94de6b | 720 | * Altered the opcode table split for m68k; it should require less VM to compile |
a40cbfa3 | 721 | with gcc now. |
252b5132 | 722 | |
a40cbfa3 NC |
723 | * Some minor adjustments to add (Convergent Technologies') Miniframe support, |
724 | suggested by Ronald Cole. | |
252b5132 | 725 | |
a40cbfa3 NC |
726 | * HPPA support (running OSF only, not HPUX) has been contributed by Utah. This |
727 | includes improved ELF support, which I've started adapting for SPARC Solaris | |
728 | 2.x. Integration isn't completely, so it probably won't work. | |
252b5132 | 729 | |
a40cbfa3 | 730 | * HP9000/300 support, donated by HP, has been merged in. |
252b5132 | 731 | |
a40cbfa3 | 732 | * Ian Taylor has finished the MIPS ECOFF (Ultrix, Irix) support. |
252b5132 | 733 | |
a40cbfa3 | 734 | * Better error messages for unsupported configurations (e.g., hppa-hpux). |
252b5132 | 735 | |
a40cbfa3 | 736 | * Test suite framework is starting to become reasonable. |
252b5132 RH |
737 | |
738 | Changes in 2.0: | |
739 | ||
a40cbfa3 | 740 | * Mostly bug fixes. |
252b5132 | 741 | |
a40cbfa3 | 742 | * Some more merging of BFD and ELF code, but ELF still doesn't work. |
252b5132 RH |
743 | |
744 | Changes in 1.94: | |
745 | ||
a40cbfa3 NC |
746 | * BFD merge is partly done. Adventurous souls may try giving configure the |
747 | "--with-bfd-assembler" option. Currently, ELF format requires it, a.out | |
748 | format accepts it; SPARC CPU accepts it. It's the default only for OS "elf" | |
749 | or "solaris". (ELF isn't really supported yet. It needs work. I've got | |
750 | some code from Utah for HP-PA ELF, and from DG for m88k ELF, but they're not | |
751 | fully merged yet.) | |
252b5132 | 752 | |
a40cbfa3 NC |
753 | * The 68K opcode table has been split in half. It should now compile under gcc |
754 | without consuming ridiculous amounts of memory. | |
252b5132 | 755 | |
a40cbfa3 NC |
756 | * A couple data structures have been reduced in size. This should result in |
757 | saving a little bit of space at runtime. | |
252b5132 | 758 | |
a40cbfa3 NC |
759 | * Support for MIPS, from OSF and Ralph Campbell, has been merged in. The OSF |
760 | code provided ROSE format support, which I haven't merged in yet. (I can | |
761 | make it available, if anyone wants to try it out.) Ralph's code, for BSD | |
762 | 4.4, supports a.out format. We don't have ECOFF support in just yet; it's | |
763 | coming. | |
252b5132 | 764 | |
a40cbfa3 | 765 | * Support for the Hitachi H8/500 has been added. |
252b5132 | 766 | |
a40cbfa3 NC |
767 | * VMS host and target support should be working now, thanks chiefly to Eric |
768 | Youngdale. | |
252b5132 RH |
769 | |
770 | Changes in 1.93.01: | |
771 | ||
a40cbfa3 | 772 | * For m68k, support for more processors has been added: 68040, CPU32, 68851. |
252b5132 | 773 | |
a40cbfa3 | 774 | * For i386, .align is now power-of-two; was number-of-bytes. |
252b5132 | 775 | |
a40cbfa3 NC |
776 | * For m68k, "%" is now accepted before register names. For COFF format, which |
777 | doesn't use underscore prefixes for C labels, it is required, so variable "a0" | |
778 | can be distinguished from the register. | |
252b5132 | 779 | |
a40cbfa3 NC |
780 | * Last public release was 1.38. Lots of configuration changes since then, lots |
781 | of new CPUs and formats, lots of bugs fixed. | |
252b5132 RH |
782 | |
783 | \f | |
82704155 | 784 | Copyright (C) 2012-2019 Free Software Foundation, Inc. |
5bf135a7 NC |
785 | |
786 | Copying and distribution of this file, with or without modification, | |
787 | are permitted in any medium without royalty provided the copyright | |
788 | notice and this notice are preserved. | |
789 | ||
252b5132 RH |
790 | Local variables: |
791 | fill-column: 79 | |
792 | End: |