[deliverable/binutils-gdb.git] / gdb / ChangeLog

2016-04-12  Pedro Alves  <palves@redhat.com>

	* ser-base.c (fd_event): Retry read_prim on EINTR.
	(do_ser_base_readchar): Retry read_prim on EINTR.
	(ser_base_write): Retry write_prim on EINTR.
	* ser-unix.c (ser_unix_read_prim): Don't retry on EINTR here.
	(ser_unix_write_prim): Remove comment.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* remote.c (remote_pass_ctrlc): New function.
	(init_remote_ops): Install it.
	* target.c (target_terminal_inferior): Pass pending Ctrl-C to the
	target.
	(target_pass_ctrlc, default_target_pass_ctrlc): New functions.
	* target.h (struct target_ops) <to_pass_ctrlc>: New method.
	(target_pass_ctrlc, default_target_pass_ctrlc): New declarations.
	* target-delegates.c: Regenerate.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* infcmd.c (interrupt_target_1): Call target_stop is in non-stop
	mode.
	* linux-nat.c (linux_nat_interrupt): Delete.
	(linux_nat_add_target): Don't install linux_nat_interrupt.
	* remote.c (remote_interrupt_ns): Change return type to void.
	Throw error if interrupting the target is not supported.
	(remote_interrupt): Don't call the remote_stop_ns/remote_stop_as.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* defs.h (clear_quit_flag): Remove declaration.
	* extension-priv.h (struct extension_language_ops)
	<clear_quit_flag>: Remove field and update comments.
	* extension.c (clear_quit_flag): Delete.
	* guile/guile.c (guile_extension_ops): Adjust.
	* python/python.c (python_extension_ops): Adjust.
	(gdbpy_clear_quit_flag): Delete.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* main.c (captured_main): Don't clear the quit flag.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* exceptions.c (prepare_to_throw_exception): Don't clear the quit
	flag.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* event-top.c (command_handler): Don't call clear_quit_flag.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* remote-sim.c (gdb_os_poll_quit): Don't call clear_quit_flag.
	* remote.c (remote_wait_as): Don't call clear_quit_flag.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* python/python.c: Include "ser-event.h".
	(gdbpy_event_fds): Delete.
	(gdbpy_serial_event): New.
	(gdbpy_run_events): Change prototype.  Use serial_event_clear
	instead of serial_readchar.
	(gdbpy_post_event): Use serial_event_set instead of serial_write.
	(gdbpy_initialize_events): Use make_serial_event instead of
	serial_pipe.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* defs.h: Extend QUIT-related comments to mention
	interruptible_select.
	(quit_serial_event_set, quit_serial_event_clear): Declare.
	* event-top.c: Include "ser-event.h" and "gdb_select.h".
	(quit_serial_event): New global.
	(async_init_signals): Make quit_serial_event.
	(quit_serial_event_set, quit_serial_event_clear)
	(quit_serial_event_fd, interruptible_select): New functions.
	* extension.c (set_quit_flag): Set the quit serial event.
	(check_quit_flag): Clear the quit serial event.
	* gdb_select.h (interruptible_select): New declaration.
	* guile/scm-ports.c (ioscm_input_waiting): Use
	interruptible_select instead of gdb_select.
	* top.c (gdb_readline_no_editing): Likewise.
	* ui-file.c (stdio_file_read): Likewise.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* event-loop.c: Include "ser-event.h".
	(async_signal_handlers_serial_event): New global.
	(async_signals_handler, initialize_async_signal_handlers): New
	functions.
	(mark_async_signal_handler): Set
	async_signal_handlers_serial_event.
	(invoke_async_signal_handlers): Clear
	async_signal_handlers_serial_event.
	* event-top.c (async_init_signals): Call
	initialize_async_signal_handlers.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* Makefile.in (SFILES): Add ser-event.c.
	(HFILES_NO_SRCDIR): Add ser-event.h.
	(COMMON_OBS): Add ser-event.o.
	* ser-event.c, ser-event.h: New files.
	* serial.c (new_serial): New function, factored out from
	(serial_fdopen_ops): ... this.
	(serial_open_ops_1): New function, factored out from
	(serial_open): ... this.
	(serial_open_ops): New function.
	* serial.h (struct serial): Forware declare.
	(serial_open_ops): New declaration.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* serial.c (serial_open, serial_fdopen_ops, do_serial_close):
	Remove references to name.
	* serial.h (struct serial) <name>: Delete.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* remote-fileio.c (sigint_fileio_token, remote_fio_no_longjmp):
	Delete.
	(async_remote_fileio_interrupt): Delete.
	(remote_fileio_ctrl_c_signal_handler): Don't call the async signal
	handler.  Instead just always set the ctrl_c flag.
	(remote_fileio_reply): Clear remote_fio_ctrl_c_flag before
	re-enabling the SIGINT handler.
	(remote_fileio_func_open, remote_fileio_func_close)
	(remote_fileio_func_read, remote_fileio_func_write)
	(remote_fileio_func_lseek, remote_fileio_func_rename)
	(remote_fileio_func_unlink, remote_fileio_func_stat)
	(remote_fileio_func_fstat, remote_fileio_func_gettimeofday)
	(remote_fileio_func_isatty, remote_fileio_func_system)
	(remote_fileio_request): Remove references to
	remote_fio_no_longjmp.
	(initialize_remote_fileio): Don't create an async signal handler.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* event-top.c (stdin_event_handler): Call QUIT;
	(prompt_for_continue): Don't run with immediate_quit set.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* tui/tui-io.c (tui_redisplay_readline): Check
	gdb_in_secondary_prompt_p instead of immediate_quit.
	* tui/tui.c: Include top.h.
	(tui_rl_startup_hook): Check gdb_in_secondary_prompt_p instead of
	immediate_quit.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* top.c (read_command_file): Inline command_loop here.
	(command_loop): Delete.

2016-04-12  Pedro Alves  <palves@redhat.com>

	* top.c: Include "gdb_select.h".
	(gdb_readline_no_editing): Wait for input with gdb_select instead
	of blocking in fgetc.
	(command_line_input): Don't set immediate_quit.

2016-04-08  Martin Galvan  <martin.galvan@tallertechnologies.com>

	* value.c (value_next): Make pass-by-reference parameters const-correct.
	(value_parent): Likewise.
	(value_enclosing_type): Likewise.
	(value_lazy): Likewise.
	(value_stack): Likewise.
	(value_embedded_offset): Likewise.
	(value_pointed_to_offset): Likewise.
	(value_raw_address): Likewise.
	(deprecated_value_modifiable): Likewise.
	(value_free_to_mark): Likewise.
	(value_release_to_mark): Likewise.
	(internalvar_name): Likewise.
	(readjust_indirect_value_type): Likewise.
	(value_initialized): Likewise.
	* value.h (value_next): Likewise.
	(value_parent): Likewise.
	(value_enclosing_type): Likewise.
	(value_lazy): Likewise.
	(value_stack): Likewise.
	(value_embedded_offset): Likewise.
	(value_pointed_to_offset): Likewise.
	(value_raw_address): Likewise.
	(deprecated_value_modifiable): Likewise.
	(value_free_to_mark): Likewise.
	(value_release_to_mark): Likewise.
	(internalvar_name): Likewise.
	(readjust_indirect_value_type): Likewise.
	(value_initialized): Likewise.

2016-04-07  Yao Qi  <yao.qi@linaro.org>

	* record-full.c (record_full_insert_breakpoint): Return
	early if entry on the address is found in
	record_full_breakpoints.

2016-04-07  Yao Qi  <yao.qi@linaro.org>

	* record-full.c (record_full_insert_breakpoint): Set
	bp_tgt->reqstd_address and bp_tgt->placed_size.

2016-04-06  Don Breazeal  <donb@codesourcery.com>

	* value.c (value_actual_type): Don't try to get rtti type
	of the value if it has been optimized out.
	(value_optimized_out): If a memory access error occurs,
	just check vaue->optimized_out.

2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Revert the previous commit adding unknown_v_replies_ok.

2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* remote.c (struct remote_state): New field unknown_v_replies_ok.
	(packet_config_support): Read it.
	(remote_start_remote): Set it.

2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* remote.c: Revert check-in by a mistake in the previous commit.

2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
	    Pedro Alves  <palves@redhat.com>

	* exec.c (exec_file_locate_attach): Print warning for unsupported
	target_pid_to_exec_file.
	* symfile-mem.c (add_vsyscall_page): Remove the "file" command
	message part.

2016-04-04  Simon Marchi  <simon.marchi@ericsson.com>

	* cli/cli-decode.c (help_cmd_list): Fix function doc and remove
	trailing spaces.

2016-04-01  Artemiy Volkov  <artemiyv@acm.org>

	PR gdb/19820
	* eval.c (evaluate_subexp_standard): Allow TYPE_CODE_ENUM to be
        the type of BINOP_REPEAT's second operand.

2016-03-31  Yichao Yu  <yyc1992@gmail.com>

	PR gdb/19858
	* jit.c (jit_breakpoint_re_set_internal): Return 0 if we already
	got the breakpoint at the right address.
	(jit_inferior_created): New function.
	(_initialize_jit): Install jit_inferior_created as
	inferior_created observer.

2016-03-31  Marcin Kościelnicki  <koriakin@0x04.net>

	* NEWS: Mention support for tracepoints on powerpc*-linux.

2016-03-31  Catalin Udma  <catalin.udma@freescale.com>

	PR python/19743
	* python/python.c (execute_gdb_command): Use console uiout
	when executing gdb command.
	* utils.c (restore_ui_out_closure): New structure.
	(do_restore_ui_out): New function.
	(make_cleanup_restore_ui_out): Likewise.
	* utils.h (make_cleanup_restore_ui_out): Declare.

2016-03-31  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention that support for "target m32rsdi", "target mips",
	"target pmon", "target ddb", "target rockhopper", and "target lsi"
	was removed.
	* Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and
	remote-mips.o.
	(ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c.
	* configure.tgt: Remove all references to remote-m32r-sdi.o and
	remote-mips.o.
	* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete
	function.
	* mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete
	declaration.
	* remote-m32r-sdi.c, remote-mips.c: Delete files.
	* symfile.c (generic_load, generic_load): Remove comments.

2016-03-30  Yao Qi  <yao.qi@linaro.org>

	* arm-tdep.c (arm_epilogue_frame_this_id): Check 'func' against
	0 rather than NULL.

2016-03-30  Yao Qi  <yao.qi@linaro.org>

	* arm-tdep.c: (arm_make_epilogue_frame_cache): New function.
	(arm_epilogue_frame_this_id): New function.
	(arm_epilogue_frame_prev_register): New function.
	(arm_epilogue_frame_sniffer): New function.
	(arm_epilogue_frame_unwind): New.
	(arm_gdbarch_init): Append unwinder arm_epilogue_frame_unwind.

2016-03-30  Yao Qi  <yao.qi@linaro.org>

	* arm-tdep.c (arm_stack_frame_destroyed_p): Rename it ...
	(arm_stack_frame_destroyed_p_1): ... here.  Don't call
	arm_pc_is_thumb.
	(arm_stack_frame_destroyed_p): Call
	thumb_stack_frame_destroyed_p and
	arm_stack_frame_destroyed_p_1.

2016-03-30  Doug Evans  <dje@google.com>

	* python/py-utils.c (host_string_to_python_string): New function.
	* python/python-internal.h (host_string_to_python_string): Declare it.
	* python/py-*.c (*): Update all calls to
	PyString_Decode (str, strlen (str), host_charset (), NULL);
	to use host_string_to_python_string instead.

2016-03-30  Marcin Kościelnicki  <koriakin@0x04.net>

	* remote.c (remote_check_symbols): Allocate own buffer for reply.

2016-03-29  Max Filippov  <jcmvbkbc@gmail.com>

	* xtensa-tdep.c (xtensa_frame_cache): Change op1 type to LONGEST.
	Use safe_read_memory_integer instead of read_memory_integer.

2016-03-29  Marcin Kościelnicki  <koriakin@0x04.net>

	* NEWS: Mention support for tracepoints on s390*-linux.

2016-03-29  Don Breazeal  <donb@codesourcery.com>

	* gdb/value.c (value_actual_type): Fix formatting issue.

2016-03-23  Yao Qi  <yao.qi@linaro.org>

	* gdbarch.sh (software_single_step): Remove comments.
	* gdbarch.h: Regenerated.

2016-03-21  Yao Qi  <yao.qi@linaro.org>

	* arm-tdep.c (arm_record_media): New.
	(arm_record_ld_st_reg_offset): Call arm_record_media.

2016-03-21  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-tdep.c (arm_canonicalize_syscall): Canonicalize
	more syscalls.

2016-03-18  Yao Qi  <yao.qi@linaro.org>

	* sparc-tdep.c (sparc_software_single_step): Make it static.
	* sparc-tdep.h (sparc_software_single_step): Remove declaration.

2016-03-18  Yao Qi  <yao.qi@linaro.org>

	* spu-tdep.c (spu_software_single_step): Throw error when
	target_read_memory fails.

2016-03-17  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* linux-thread-db.c (check_pid_namespace_match): Extend the message.

2016-03-17  Pedro Alves  <palves@redhat.com>
	    Don Breazeal  <donb@codesourcery.com>

	PR remote/19496
	* infcmd.c (notice_new_inferior): Use the 'leave_running' argument
	instead of checking the 'non_stop' global.
	* remote.c (remote_add_thread): New parameter 'executing'.  Use it
	to set the new thread's executing state.
	(remote_notice_new_inferior): Rename parameter 'running' to
	'executing'.  Always set the thread state to THREAD_RUNNING in
	non-stop mode, and to THREAD_STOPPED in all-stop mode.  Pass
	EXECUTING to remote_add_thread and notice_new_inferior.
	(remote_update_thread_list): Update to pass executing state, not
	running state.

2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* syscalls/s390-linux.xml: Add NUMA syscalls and new syscalls up
	to 374.
	* syscalls/s390x-linux.xml: Likewise.

2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* linux-record.c (record_mem_at_reg): New helper function.
	(record_linux_system_call): Exploit new helper function where
	applicable.

2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* linux-record.c: Fix whitespace issues; tabify, remove trailing
	spaces.

2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* linux-record.c (record_linux_system_call): Add missing return
	statements to handling of pipe and pipe2 syscalls.

2016-03-16  Doug Evans  <dje@google.com>

	* xml-tdesc.c (tdesc_start_enum): Fix c++ build.

2016-03-16  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-tdep.c (arm_linux_init_abi): Fix
	arm_linux_record_tdep.arg1, arm_linux_record_tdep.arg2 and
	arm_linux_record_tdep.arg3.  Set arm_linux_record_tdep.arg4,
	arm_linux_record_tdep.arg5, arm_linux_record_tdep.arg6, and
	arm_linux_record_tdep.arg7.

2016-03-15  Keith Seitz  <keiths@redhat.com>

	PR breakpoints/18303
	* cp-namespace.c (cp_lookup_bare_symbol): Change assertion to
	look for "::" instead of simply ":".
	(cp_search_static_and_baseclasses): Return null_block_symbol for
	malformed input.
	Remove assertions.
	* cp-support.c (cp_find_first_component_aux): Do not return
	a prefix length for ':' unless the next character is also ':'.

2016-03-15  Doug Evans  <dje@google.com>

	* features/aarch64-core.xml (cpsr_flags): New flags type.
	(cpsr): Use it.
	* features/aarch64.c: Regenerate.

2016-03-15  Doug Evans  <dje@google.com>

	* features/i386/32bit-core.xml (i386_eflags): Remove "end" spec.
	* features/i386/32bit-sse.xml (i386_eflags): Ditto.
	* features/i386/64bit-core.xml (i386_eflags): Ditto.
	* features/i386/64bit-sse.xml (i386_eflags): Ditto.
	* features/i386/x32-core.xml (i386_eflags): Ditto.

2016-03-15  Doug Evans  <dje@google.com>
	    Wei-cheng Wang  <cole945@gmail.com>

	Extend flags to support multibit and enum bitfields.
	* NEWS: Document new features.
	* c-typeprint.c (c_type_print_varspec_prefix): Handle TYPE_CODE_FLAGS.
	(c_type_print_varspec_suffix, c_type_print_base): Ditto.
	* gdbtypes.c (arch_flags_type): Don't assume all fields are one bit.
	(append_flags_type_field): New function.
	(append_flags_type_flag): Call it.
	* gdbtypes.h (append_flags_type_field): Declare.
	* target-descriptions.c (struct tdesc_type_flag): Delete.
	(enum tdesc_type_kind) <TDESC_TYPE_BOOL>: New enum value.
	(enum tdesc_type_kind) <TDESC_TYPE_ENUM>: Ditto.
	(struct tdesc_type) <u.f>: Delete.
	(tdesc_predefined_types): Add "bool".
	(tdesc_predefined_type): New function.
	(tdesc_gdb_type): Handle TDESC_TYPE_BOOL, TDESC_TYPE_ENUM.
	Update TDESC_TYPE_FLAGS support.
	(tdesc_free_type): Handle TDESC_TYPE_ENUM.  Update TDESC_TYPE_FLAGS.
	(tdesc_create_flags): Update.
	(tdesc_create_enum): New function.
	(tdesc_add_field): Initialize start,end to -1.
	(tdesc_add_typed_bitfield): New function.
	(tdesc_add_bitfield): Call it.
	(tdesc_add_flag): Allow TDESC_TYPE_STRUCT.  Update.
	(tdesc_add_enum_value): New function.
	(maint_print_c_tdesc_cmd): Fold TDESC_TYPE_FLAGS support into
	TDESC_TYPE_STRUCT.  Handle TDESC_TYPE_ENUM.
	* target-descriptions.h (tdesc_create_enum): Declare.
	(tdesc_add_typed_bitfield, tdesc_add_enum_value): Declare.
	* valprint.c (generic_val_print_enum_1): New function.
	(generic_val_print_enum): Call it.
	(val_print_type_code_flags): Make static.  Handle multibit bitfields
	and enum bitfields.
	* valprint.h (val_print_type_code_flags): Delete.
	* xml-tdesc.c (struct tdesc_parsing_data) <current_type_is_flags>:
	Delete.  All uses removed.
	(tdesc_start_enum): New function.
	(tdesc_start_field): Handle multibit and enum bitfields.
	(tdesc_start_enum_value): New function.
	(enum_value_attributes, enum_children, enum_attributes): New static
	globals.
	(feature_children): Add "enum".
	* features/gdb-target.dtd (enum, evalue): New elements.

2016-03-15  Doug Evans  <dje@google.com>

	* target-descriptions.c (struct tdesc_type) <u.u.size>: Change type
	from LONGEST to int.
	(struct tdesc_type) <u.f.size>: Ditto.
	(tdesc_set_struct_size): Change type of "size" arg from LONGEST
	to int.  Add assertion size > 0.
	(tdesc_create_flags): Ditto.
	* target-descriptions.h (tdesc_set_struct_size): Update.
	(tdesc_create_flags): Update.
	* xml-tdesc.c (MAX_FIELD_SIZE, MAX_FIELD_BITSIZE): New macros.
	(MAX_VECTOR_SIZE): New macro.
	(tdesc_start_struct): Catch conversion errors from LONGEST to int.
	(tdesc_start_flags, tdesc_start_field, tdesc_start_vector): Ditto.

2016-03-15  Doug Evans  <dje@google.com>

	* target-descriptions.c (maint_print_c_tdesc_cmd): Use "type" for
	TYPE_CODE_FLAGS instead of "field_type", for consistency.
	* features/i386/amd64-avx-linux.c: Regenerate.
	* features/i386/amd64-avx.c: Regenerate.
	* features/i386/amd64-avx512-linux.c: Regenerate.
	* features/i386/amd64-avx512.c: Regenerate.
	* features/i386/amd64-linux.c: Regenerate.
	* features/i386/amd64-mpx-linux.c: Regenerate.
	* features/i386/amd64-mpx.c: Regenerate.
	* features/i386/amd64.c: Regenerate.
	* features/i386/i386-avx-linux.c: Regenerate.
	* features/i386/i386-avx.c: Regenerate.
	* features/i386/i386-avx512-linux.c: Regenerate.
	* features/i386/i386-avx512.c: Regenerate.
	* features/i386/i386-linux.c: Regenerate.
	* features/i386/i386-mmx-linux.c: Regenerate.
	* features/i386/i386-mmx.c: Regenerate.
	* features/i386/i386-mpx-linux.c: Regenerate.
	* features/i386/i386-mpx.c: Regenerate.
	* features/i386/i386.c: Regenerate.
	* features/i386/x32-avx-linux.c: Regenerate.
	* features/i386/x32-avx.c: Regenerate.
	* features/i386/x32-avx512-linux.c: Regenerate.
	* features/i386/x32-avx512.c: Regenerate.
	* features/i386/x32-linux.c: Regenerate.
	* features/i386/x32.c: Regenerate.

2016-03-15  Pedro Alves  <palves@redhat.com>

	PR gdb/19676
	* linux-thread-db.c (try_thread_db_load_1): Leave
	info->td_ta_thr_iter_p NULL iff debugging a live process and we
	have /proc access.
	(find_new_threads_once): Assert that we have a non-NULL
	info->td_ta_thr_iter_p instead of checking whether the target has
	execution.

2016-03-15  Pedro Alves  <palves@redhat.com>

	PR gdb/19676
	* infrun.c (displaced_step_prepare): Also disable displaced
	stepping on NOT_SUPPORTED_ERROR.
	* linux-tdep.c (linux_displaced_step_location): If reading auxv
	fails, throw NOT_SUPPORTED_ERROR instead of generic error.

2016-03-13  Marcin Kościelnicki  <koriakin@0x04.net>

	* s390-linux-tdep.c (s390_gen_return_address): New function.
	(s390_gdbarch_init): Fill gen_return_address hook.

2016-03-11  Andrew Burgess  <andrew.burgess@embecosm.com>

	* symmisc.c (maintenance_info_line_tables): New function.
	(maintenance_print_one_line_table): New function.
	(_initialize_symmisc): Register 'maint info line-table' command.
	* NEWS: Mention new command.

2016-03-11  Marcin Kościelnicki  <koriakin@0x04.net>

	* s390-linux-tdep.c (s390_ax_pseudo_register_collect): New function.
	(s390_ax_pseudo_register_push_stack): New function.
	(s390_gdbarch_init): Fill ax_pseudo_register_collect and
	ax_pseudo_register_push_stack hooks.

2016-03-10  Simon Marchi  <simon.marchi@polymtl.ca>

	* data-directory/Makefile.in (PYTHON_FILE_LIST): Install
	gdb/function/as_string.py.
	* python/lib/gdb/function/as_string.py: New file.
	* NEWS: Mention the new $_as_string function.

2016-03-09  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* target.h: Fix doc string of target_can_use_hardware_watchpoint.

2016-03-09  Pedro Alves  <palves@redhat.com>

	* event-top.c (more_to_come): Delete.
	(struct readline_input_state): Delete.
	(readline_input_state): Delete.
	(get_command_line_buffer): New function.
	(command_handler): Update comments.  Don't handle NULL commands
	here.  Do not execute commented lines.
	(command_line_append_input_line): New function.
	(handle_line_of_input): New function, partly based on
	command_line_handler and command_line_input.
	(command_line_handler): Rewrite.
	* event-top.h (command_handler): New declaration.
	(command_loop): Defer command execution to command_handler.
	(command_line_input): Update comments.  Simplify, using struct
	buffer and handle_line_of_input.
	* top.h (struct buffer): New forward declaration.
	(handle_line_of_input): New declaration.

2016-03-09  Pedro Alves  <palves@redhat.com>

	* event-top.c (command_line_handler): Use xfree + xstrdup instead
	of xrealloc + strcpy.
	* main.c (captured_main): Use xstrdup instead of xmalloc plus
	manual clear.
	* top.c (saved_command_line): Rewrite comment.
	(saved_command_line_size): Delete.
	(command_line_input): Use xfree + xstrdup instead of xrealloc +
	strcpy.
	* top.h (saved_command_line_size): Delete declaration.

2016-03-09  Pedro Alves  <palves@redhat.com>

	* event-top.c: Include buffer.h.
	(gdb_readline_no_editing_callback): Use struct buffer instead
	of xrealloc.

2016-03-09  Pedro Alves  <palves@redhat.com>

	* common/buffer.h (buffer_grow_char): New function.
	* top.c: Include buffer.h.
	(gdb_readline_no_editing): Rename 'prompt_arg' parameter to
	'prompt'.  Use struct buffer instead of xrealloc.

2016-03-09  Pedro Alves  <palves@redhat.com>

	* defs.h (gdb_readline): Delete declaration.
	* top.c (gdb_readline): Rename to ...
	(gdb_readline_no_editing): ... this, and make static.

2016-03-09  Pedro Alves  <palves@redhat.com>

	* utils.c (prompt_for_continue): Update comments.

2016-03-09  Pedro Alves  <palves@redhat.com>

	* event-top.c (async_annotation_suffix): Delete.
	(top_level_prompt, command_line_handler): Don't use
	'async_annotation_suffix' and simplify.
	* event-top.h (async_annotation_suffix): Delete declaration.
	(init_main): Remove reference to 'async_annotation_suffix'.

2016-03-09  Pedro Alves  <palves@redhat.com>

	* event-top.c (gdb_readline2): Rename to ...
	(gdb_readline_no_editing_callback): ... this.
	(change_line_handler, stdin_event_handler)
	(gdb_setup_readline): Adjust.
	* event-top.h (gdb_readline2): Rename to ...
	(gdb_readline_no_editing_callback): ... this, and move closer to
	other readline-related declarations.
	* mi/mi-interp.c (mi_interpreter_resume): Adjust.

2016-03-09  Pedro Alves  <palves@redhat.com>

	* top.c (window_hook): Delete.
	(command_loop): Remove references to window_hook.

2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>

	* corefile.c (safe_read_memory_unsigned_integer): New function.
	* gdbcore.h (safe_read_memory_unsigned_integer): New prototype.
	* rs6000-tdep.c (rs6000_frame_cache): Read backchain as unsigned.

2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>

	* rs6000-tdep.c: Add "ax.h" and "ax-gdb.h" includes.
	(rs6000_gen_return_address): New function.
	(rs6000_gdbarch_init): Wire in the above.

2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>

	* rs6000-tdep.c (rs6000_ax_pseudo_register_collect): New function.
	(rs6000_gdbarch_init): Wire in the above.

2016-03-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-tdep.c (s390_analyze_prologue): Ignore BRC and BRCL
	instructions that do nothing or are conditional traps.

2016-03-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-tdep.c (s390_prologue_frame_unwind_cache): Store
	frame func's PC in info->func before any other failure can occur.
	(s390_frame_this_id): Use frame_id_build_unavailable_stack if
	info->func has been filled out.

2016-03-09  Pedro Alves  <palves@redhat.com>

	* osabi.c (gdb_osabi_names): Avoid spaces in osabi names.

2016-03-09  Pedro Alves  <palves@redhat.com>

	* frv-tdep.c (frv_gdbarch_init): Handle bfd_mach_fr300.

2016-03-09  Pedro Alves  <palves@redhat.com>

	* cris-tdep.c (cris_gdbarch_init): Return 0 if the info's byte
	order is BFD_ENDIAN_BIG or if the cris version is unsupported.

2016-03-09  Pedro Alves  <palves@redhat.com>

	* doublest.c: Extend comments.
	(floatformat_to_doublest, floatformat_from_doublest): Copy the
	floatformat's total size, not the host type's size.

2016-03-09  Pedro Alves  <palves@redhat.com>

	* doublest.c (floatformat_totalsize_bytes): New function.
	(floatformat_from_type): Assert that the type's length is at least
	as long as the floatformat's totalsize.
	* doublest.h (floatformat_totalsize_bytes): New declaration.
	* gdbtypes.c (arch_float_type): Assert that the type's length is
	at least as long as the floatformat's totalsize.

2016-03-09  Pedro Alves  <palves@redhat.com>

	* hppa-linux-tdep.c (hppa_linux_init_abi): Set the long double
	format to floatformats_ieee_double.

2016-03-07  Pedro Alves  <palves@redhat.com>

	* mips-tdep.c (mips_gdbarch_init): Check whether info.abfd is NULL
	before calling bfd_get_flavour.

2016-03-05  Pitchumani Sivanupandi  <pitchumani.s@atmel.com>

	* avr-tdep.c (AVR_LAST_ARG_REGNUM): Define.
	(avr_push_dummy_call): Correct last needed argument register.
	Write MSB of argument into register and subsequent bytes into
	other registers in decreasing order.

2016-03-04  Yao Qi  <yao.qi@linaro.org>

	* arm-tdep.c (arm_record_vdata_transfer_insn): Simplify the
	condition check.  Record the right D register number.

2016-03-04  Yao Qi  <yao.qi@linaro.org>

	* arm-tdep.c (arm_record_extension_space): Remove code
	printing "Process record does not support".
	(arm_record_data_proc_misc_ld_str): Likewise.
	(decode_insn): Call arm_record_extension_space if condition
	is 0xf.  Call arm_record_unsupported_insn if ret isn't
	ARM_RECORD_SUCCESS.  Use 'ret' instead of 'insn_id' to hold
	the value of thumb2_record_decode_insn_handler.

2016-03-04  Simon Marchi  <simon.marchi@ericsson.com>

	* features/feature_to_c.sh: Print the help when passing no
	argument.

2016-03-02  Bernhard Heckel  <bernhard.heckel@intel.com>

	* MAINTAINERS (Write After Approval): Add Bernhard Heckel.

2016-03-02  Bernhard Heckel  <bernhard.heckel@intel.com>

	* dwarf2read.c (new_symbol_full): Fix detection of gfortran compilers.

2016-03-01  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-linux-tdep.c (s390_backchain_frame_unwind_cache): Avoid
	exception when attempting to access the inferior's backchain.

2016-02-29  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-tdep.c (aarch64_canonicalize_syscall): Support
	eventfd2, eventfd2, dup3, inotify_init1, fallocate and pipe2.
	Return gdb_sys_epoll_create1 instead of gdb_sys_epoll_create
	for aarch64_sys_epoll_create1.

2016-02-29  Yao Qi  <yao.qi@linaro.org>

	* linux-record.h (enum gdb_syscall) <gdb_sys_fallocate>: New.
	<gdb_sys_eventfd2, gdb_sys_epoll_create1, gdb_sys_dup3>: New.
	<gdb_sys_pipe2, gdb_sys_inotify_init1>: New.
	* linux-record.c (record_linux_system_call): Handle them.

2016-02-28  Iain Buclaw  <ibuclaw@gdcproject.org>

	* d-namespace.c (d_lookup_symbol_imports): Avoid recursive lookups from
	cyclic imports.

2016-02-26  Keith Seitz  <keiths@redhat.com>

	* rs6000-tdep.c (rs6000_frame_cache): Explicitly cast return result
	to avoid invalid conversion from void *.

2016-02-26  Yao Qi  <yao.qi@linaro.org>

	* arm-tdep.c (arm_record_exreg_ld_st_insn): Set 'single_reg'
	per bit 8.  Check bit 20 instead of bit 4 for VMOV
	instruction.  Record D registers for instructions changing
	S registers.  Change of the order of length and address
	in record_buf_mem array.

2016-02-26  Yao Qi  <yao.qi@linaro.org>

	* arm-tdep.c (thumb_record_ld_st_reg_offset): Fix the register
	number of Rd.

2016-02-25  Doug Evans  <dje@google.com>

	* remote-m32r-sdi.c (recv_char_data): Initialize val to avoid
	compiler warning.
	(recv_long_data): Ditto.

2016-02-25  Simon Marchi  <simon.marchi@ericsson.com>

	* i386-linux-tdep.c (i386_linux_handle_segmentation_fault):
	Initialize variables.

2016-02-25  Antoine Tremblay  <antoine.tremblay@ericsson.com>

	* ax-general.c (ax_reg): Call gdbarch_remote_register_number.
	(ax_reg_mask): Likewise.

2016-02-24  Pedro Alves  <palves@redhat.com>

	* linux-nat.c (save_sigtrap) Delete.
	(stop_wait_callback): Call save_stop_reason instead of
	save_sigtrap.
	(check_stopped_by_breakpoint): Rename to ...
	(save_stop_reason): ... this.  Bits of save_sigtrap folded here.
	Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous
	GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT.  Factor out
	common code between the USE_SIGTRAP_SIGINFO and
	!USE_SIGTRAP_SIGINFO blocks.
	(linux_nat_filter_event): Call save_stop_reason instead of
	save_sigtrap.
	* nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT
	si_code for MIPS.
	* nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table.  Add
	comments on MIPS behavior.
	(GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs.

2016-02-24  Marcin Kościelnicki  <koriakin@0x04.net>

	* rs6000-tdep.c (rs6000_frame_cache): Initialize frame and pc to 0
	to avoid spurious warnings.

2016-02-24  Gary Benson  <gbenson@redhat.com>

	* exec.c (exec_file_locate_attach): Do not attempt to
	locate main executable locally if not found in sysroot.

2016-02-24  Joel Brobecker  <brobecker@adacore.com>

	GDB 7.11 released.

2016-02-24  Wei-cheng Wang  <cole945@gmail.com>

	* rs6000-tdep.c (rs6000_frame_cache, rs6000_frame_this_id): Handle
	unavailable PC/SP to build unavailable frame.

2016-02-23  Doug Evans  <dje@google.com>

	Extend "skip" command to support -file, -gfile, -function, -rfunction.
	* NEWS: Document new features.
	* skip.c: #include "fnmatch.h", "gdb_regex.h".
	(skiplist_entry) <file>: Renamed from filename.
	<function>: Renamed from function_name.
	<file_is_glob, function_is_regexp>: New members.
	<compiled_function_regexp, compiled_function_regexp_is_valid>:
	New members.
	(make_skip_entry): New function.
	(free_skiplist_entry, free_skiplist_entry_cleanup): New functions.
	(make_free_skiplist_entry_cleanup): New function.
	(skip_file_command): Update.
	(skip_function, skip_function_command): Update.
	(compile_skip_regexp): New functions.
	(skip_command): Add support for new options.
	(skip_info): Update.
	(skip_file_p, skip_gfile_p): New functions.
	(skip_function_p, skip_rfunction_p): New functions.
	(function_name_is_marked_for_skip): Update and simplify.
	(_initialize_step_skip): Update.
	* symtab.c: #include "fnmatch.h".
	(compare_glob_filenames_for_search): New function.
	* symtab.h (compare_glob_filenames_for_search): Declare.
	* utils.c (count_path_elements): New function.
	(strip_leading_path_elements): New function.
	* utils.h (count_path_elements): Declare.
	(strip_leading_path_elements): Declare.

2016-02-23  Simon Marchi  <simon.marchi@ericsson.com>

	* arm-tdep.c (arm_decode_svc_copro): Remove "to" parameter.
	(thumb_process_displaced_insn): Likewise.
	(arm_process_displaced_insn): Adjust calls.

2016-02-23  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-tdep.c (enum aarch64_syscall) <aarch64_sys_mknod>:
	Remove.
	<aarch64_sys_mkdir, aarch64_sys_unlink, aarch64_sys_symlink>: Remove.
	<aarch64_sys_link, aarch64_sys_rename, aarch64_sys_faccess>: Remove.
	<aarch64_sys_mknodat, aarch64_sys_mkdirat>: New.
	<aarch64_sys_unlinkat, aarch64_sys_symlinkat>: New.
	<aarch64_sys_linkat, aarch64_sys_renameat>: New.
	<aarch64_sys_faccessat>: New.
	<aarch64_sys_open, aarch64_sys_readlink, aarch64_sys_fstatat>: Remove.
	<aarch64_sys_openat, aarch64_sys_readlinkat>: New.
	<aarch64_sys_newfstatat>: New.
	(UNSUPPORTED_SYSCALL_MAP): New macro.
	(aarch64_canonicalize_syscall): Add missing syscalls.

2016-02-22  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* gdb-gdb.py (class TypeFlagsPrinter): Use parentheses for print.

2016-02-22  Yao Qi  <yao.qi@linaro.org>

	* arm-tdep.c: Fix code format issues.

2016-02-21  Iain Buclaw  <ibuclaw@gdcproject.org>

	* d-namespace.c (d_lookup_symbol_imports): Remove argument
	'search_parents'.  All callers updated.

2016-02-18  Marcin Kościelnicki  <koriakin@0x04.net>

	* s390-linux-tdep.c (s390_guess_tracepoint_registers): New function.
	(s390_gdbarch_init): Fill guess_tracepoint_registers hook.

2016-02-18  Walfred Tedeschi  <walfred.tedeschi@intel.com>

	* NEWS: Add entry for bound violation.
	* amd64-linux-tdep.c (amd64_linux_init_abi_common):
	Add handler for segmentation fault.
	* gdbarch.sh (handle_segmentation_fault): New.
	* gdbarch.c: Regenerate.
	* gdbarch.h: Regenerate.
	* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New.
	(SIG_CODE_BONDARY_FAULT): New define.
	(i386_linux_init_abi): Use i386_mpx_bound_violation_handler.
	* i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New.
	* i386-tdep.c (i386_mpx_enabled): Add as external.
	* i386-tdep.c (i386_mpx_enabled): Add as external.
	* infrun.c (handle_segmentation_fault): New function.
	(print_signal_received_reason): Use handle_segmentation_fault.

2016-02-18  Marcin Kościelnicki  <koriakin@0x04.net>

	* arch-utils.c (default_guess_tracepoint_registers): New function.
	* arch-utils.h (default_guess_tracepoint_registers): New prototype.
	* gdbarch.c: Regenerate.
	* gdbarch.h: Regenerate.
	* gdbarch.sh: Add guess_tracepoint_registers hook.
	* tracefile.c (tracefile_fetch_registers): Use the new gdbarch hook.

2016-02-17  Gary Benson  <gbenson@redhat.com>

	* exec.c (exec_file_locate_attach): Add missing cleanup.

2016-02-16  Don Breazeal  <donb@codesourcery.com>

	PR remote/19496
	* remote.c (remove_new_fork_children): Check for pending
	fork status in thread_info.suspend.

2016-02-16  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-tdep.c (arm_linux_software_single_step): Assign
	'old_chain' later.

2016-02-16  Yao Qi  <yao.qi@linaro.org>

	* arch/arm-get-next-pcs.h (struct arm_get_next_pcs_ops)
	<syscall_next_pc>: Remove argument PC.  Callers updated.
	* arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
	Remove argument PC.  Get pc from regcache_read_pc.
	* arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Remove
	argument PC.

2016-02-15  Yao Qi  <yao.qi@linaro.org>

	* aarch64-tdep.c (aarch64_analyze_prologue): Remove "0x".

2016-02-12  Yao Qi  <yao.qi@linaro.org>

	* arch/arm-linux.c (arm_linux_get_next_pcs_fixup): Calculate
	nextpc according to instruction.

2016-02-12  Yao Qi  <yao.qi@linaro.org>

	* arch/arm-get-next-pcs.c (arm_get_next_pcs): Call
	self->ops->fixup if it isn't NULL.
	* arch/arm-get-next-pcs.h: Include gdb_vecs.h.
	(struct arm_get_next_pcs_ops) <fixup>: New field.
	* arch/arm-linux.c: Include common-regcache.h and
	arch/arm-get-next-pcs.h.
	(arm_linux_get_next_pcs_fixup): New function.
	* arch/arm-linux.h (arm_linux_get_next_pcs_fixup): Declare.
	* arm-linux-tdep.c (arm_linux_get_next_pcs_ops): Initialize
	it with arm_linux_get_next_pcs_fixup.
	(arm_linux_software_single_step): Move code to
	arm_linux_get_next_pcs_fixup.
	* arm-tdep.c (arm_get_next_pcs_ops): Initialize it.

2016-02-12  Marcin Kościelnicki  <koriakin@0x04.net>

	* xml-tdesc.c (target_fetch_description_xml) [!HAVE_LIBEXPAT]: Warn
	and return NULL.

2016-02-12  Markus Metzger  <markus.t.metzger@intel.com>

	* frame.h (skip_tailcall_frames): Update comment.
	* frame.c (skip_artificial_frames, skip_tailcall_frames): Return NULL
	if only artificial frames are found.  Update comment.
	(frame_unwind_caller_id): Handle NULL return.
	(frame_unwind_caller_pc, frame_unwind_caller_arch): Assert that
	skip_artificial_frames does not return NULL.
	(frame_pop): Add an error if only tailcall frames are found.
	* infcmd.c (finish_command): Move skip_tailcall_frames call into
	forward-execution case.  Add an error if only tailcall frames are
	found.

2016-02-12  Markus Metzger  <markus.t.metzger@intel.com>

	* stack.c (frame_info): Check frame_unwind_caller_id.

2016-02-12  Markus Metzger  <markus.t.metzger@intel.com>

	* frame.h (skip_tailcall_frames): New.
	* frame.c (skip_tailcall_frames): New.
	(frame_pop): Call skip_tailcall_frames.
	* infcmd.c (finish_command): Call skip_tailcall_frames.

2016-02-11  Pedro Alves  <palves@redhat.com>

	* Makefile.in (check-parallel): New rule.

2016-02-11  Simon Marchi  <simon.marchi@ericsson.com>

	* arm-tdep.c (arm_skip_prologue): Remove unused variables.
	(arm_analyze_prologue): Likewise.
	(arm_scan_prologue): Likewise.
	(arm_m_exception_prev_register): Likewise.
	(arm_copy_block_xfer): Likewise.
	(thumb2_copy_block_xfer): Likewise.
	(arm_decode_miscellaneous): Likewise.
	(arm_decode_ld_st_word_ubyte): Likewise.
	(arm_decode_svc_copro): Likewise.
	(thumb2_decode_svc_copro): Likewise.
	(thumb_copy_16bit_ldr_literal): Likewise.
	(thumb_copy_pop_pc_16bit): Likewise.
	(decode_thumb_32bit_ld_mem_hints): Likewise.
	(arm_show_force_mode): Likewise.
	(_initialize_arm_tdep): Likewise.
	(arm_record_strx): Likewise.
	(arm_record_extension_space): Likewise.
	(arm_record_data_proc_misc_ld_str): Likewise.
	(arm_record_exreg_ld_st_insn): Likewise.
	(arm_record_vfp_data_proc_insn): Likewise.
	(arm_record_coproc_data_proc): Likewise.
	(thumb_record_misc): Likewise.
	(thumb_record_ldm_stm_swi): Likewise.
	(thumb2_record_ld_st_dual_ex_tbb): Likewise.
	(thumb2_record_ld_mem_hints): Likewise.
	(thumb2_record_lmul_lmla_div): Likewise.
	(thumb2_record_asimd_struct_ld_st): Likewise.
	(arm_process_record): Likewise.

2016-02-11  Simon Marchi  <simon.marchi@ericsson.com>

	* arm-tdep.c (arm_displaced_step_copy_insn): Remove.
	(ARM displaced stepping support): Remove reference to
	arm_displaced_step_copy_insn in comment.
	* arm-tdep.h (arm_displaced_step_copy_insn): Remove.
	* arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Remove
	reference to arm_displaced_step_copy_insn in comment.

2016-02-11  Simon Marchi  <simon.marchi@ericsson.com>

	* arm-tdep.c (thumb_copy_unmodified_16bit): Change type of insn.
	(thumb_copy_b): Likewise.
	(arm_decode_b_bl_ldmstm): Likewise.
	(thumb_copy_16bit_ldr_literal): Likewise.
	(thumb_copy_pop_pc_16bit): Likewise.

2016-02-11  Antoine Tremblay  <antoine.tremblay@ericsson.com>

	* tracepoint.c (encode_actions_1): Use target_gdbarch () rather
	than loc->gdbarch.

2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>

	* tracefile-tfile.c (trace_tdesc): New static variable.
	(tfile_open): Clear trace_tdesc, call target_find_description.
	(tfile_interp_line): Recognize tdesc lines.
	(tfile_close): Clear trace_tdesc.
	(tfile_xfer_partial_features): New function.
	(tfile_xfer_partial): Call tfile_xfer_partial_features.
	(tfile_append_tdesc_line): New function.

2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>

	* ctf.c (ctf_write_tdesc): New function.
	(ctf_write_ops): Wire in ctf_write_tdesc.
	* tracefile-tfile.c (tfile_write_tdesc): New function.
	(tfile_write_ops): Wire in tfile_write_tdesc.
	* tracefile.c (trace_save): Call write_tdesc method.
	* tracefile.h (struct trace_file_write_ops): Add write_tdesc method.
	* xml-tdesc.c (target_fetch_description_xml): New function.
	* xml-tdesc.h: Add target_fetch_description_xml prototype.

2016-02-10  Simon Marchi  <simon.marchi@ericsson.com>

	* arm-tdep.c (arm_copy_extra_ld_st): Fix "unpriveleged" typo.
	(arm_decode_dp_misc): Likewise.

2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>

	* amd64-tdep.c (amd64_ax_pseudo_register_collect): New function.
	(amd64_init_abi): Fill ax_pseudo_register_collect hook.
	* gdb/i386-tdep.c (i386_pseudo_register_read_into_value): Remove
	misleading comment.
	(i386_pseudo_register_write): Ditto.
	(i386_ax_pseudo_register_collect): New function.
	(i386_gdbarch_init): Fill ax_pseudo_register_collect hook.
	* i386-tdep.h: Add i386_ax_pseudo_register_collect prototype.

2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>

	* tracefile-tfile.c (tfile_fetch_registers): Use g packet order
	instead of gdb order.

2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>

	* tracefile-tfile.c (tfile_fetch_registers): Fix off-by-one in bounds
	check.

2016-02-10  Joel Brobecker  <brobecker@adacore.com>

	* NEWS: Create a new section for the next release branch.
	Rename the section of the current branch, now that it has
	been cut.

2016-02-10  Joel Brobecker  <brobecker@adacore.com>

	GDB 7.11 branch created (9ef9e6a6a0dd8f948708cb67c9afcfd0be40cb0a):
	* version.in: Bump version to 7.11.50.DATE-git.

2016-02-09  Keith Seitz  <keiths@redhat.com>

	PR breakpoints/19546
	* breakpoint.c (breakpoint_event_location_empty_p): New function.
	(update_breakpoints_after_exec, bkpt_re_set): Use this new function
	instead of event_location_empty_p.

2016-02-09  Keith Seitz  <keiths@redhat.com>

	* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Use
	string_to_event_location_basic instead of string_to_event_location.

2016-02-09  Keith Seitz  <keiths@redhat.com>

	* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Skip
	leading whitespace and use string_to_event_location_basic instead
	of new_linespec_location.

2016-02-09  Keith Seitz  <keiths@redhat.com>

	PR python/19506
	* python/py-breakpoint.c (bppy_init): Use
	string_to_event_location_basic instead of new_linespec_location.

2016-02-09  Keith Seitz  <keiths@redhat.com>

	* location.c (string_to_explicit_location): Note that "-p" is
	reserved for probe locations and return NULL for any input
	that starts with that.
	(string_to_event_location): Move "legacy" linespec code to ...
	(string_to_event_location_basic): ... here.
	* location.h (string_to_event_location): Update comment.
	(string_to_event_location_basic): New function.

2016-02-09  Simon Marchi  <simon.marchi@ericsson.com>

	* configure.ac: Use AC_CONFIG_FILES instead of passing arguments
	to AC_OUTPUT.  Remove "exit 0" at the end.
	* configure: Regenerate.

2016-02-09  Pedro Alves  <palves@redhat.com>

	PR breakpoints/19548
	* breakpoint.c (create_overlay_event_breakpoint): Don't update
	global location list here.
	(create_longjmp_master_breakpoint)
	(create_std_terminate_master_breakpoint)
	(create_exception_master_breakpoint, create_jit_event_breakpoint)
	(update_breakpoint_locations):
	(breakpoint_re_set): Update global location list after all
	breakpoints are re-set.

2016-02-08  Simon Marchi  <simon.marchi@ericsson.com>

	* remote.c (remote_register_number_and_offset): Remove unused
	variable(s).
	(remote_thread_always_alive): Likewise.
	(remote_update_thread_list): Likewise.
	(process_initial_stop_replies): Likewise.
	(remote_start_remote): Likewise.
	(remote_check_symbols): Likewise.
	(discard_pending_stop_replies): Likewise.
	(process_stop_reply): Likewise.
	(putpkt_binary): Likewise.
	(getpkt): Likewise.
	(remote_add_target_side_condition): Likewise.
	(remote_insert_breakpoint): Likewise.
	(remote_supports_stopped_by_sw_breakpoint): Likewise.
	(remote_supports_stopped_by_hw_breakpoint): Likewise.
	(remote_xfer_partial): Likewise.
	(remote_read_btrace): Likewise.
	(remote_async_serial_handler): Likewise.
	(remote_thread_events): Likewise.
	(_initialize_remote): Likewise.

2016-02-07  Simon Marchi  <simon.marchi@polymtl.ca>

	* varobj.h (varobj_delete): Remove dellist parameter, update and
	move documentation here.
	* varobj.c (struct cpstack, cppush, cppop): Remove.
	(delete_variable): Remove resultp (first) parameter.
	(delete_variable_1): Likewise.
	(varobj_delete): Remove dellist parameter and unused code.
	(update_dynamic_varobj_children): Adjust varobj_delete call.
	(update_type_if_necessary): Likewise.
	(varobj_set_visualizer): Likewise.
	(varobj_update): Likewise.
	(value_of_root): Likewise.
	(varobj_invalidate_iter): Likewise.
	* mi/mi-cmd-var.c (mi_cmd_var_delete): Likewise.

2016-02-04  Yao Qi  <yao.qi@linaro.org>

	* remote.c (remote_wait_as): Set rs->waiting_for_stop_reply to
	0 before handling 'F' and set it back afterwards.

2016-02-02  Simon Marchi  <simon.marchi@ericsson.com>

	* ui-out.c (MAX_UI_OUT_LEVELS): Remove.

2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>

	* amd64-linux-siginfo.c (nat_siginfo_t, nat_sigval_t, nat_timeval):
	New types.
	(compat_siginfo): New bound fields added.
	(compat_x32_siginfo): New field added.
	(cpt_si_addr_lsb): New define.
	(compat_siginfo_from_siginfo): Use nat_siginfo.
	(siginfo_from_compat_siginfo): Use nat_siginfo.
	(compat_x32_siginfo_from_siginfo): Likewise.
	(siginfo_from_compat_x32_siginfo): Likewise.

2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>

	* linux-tdep.c (linux_get_siginfo_type): Add the _addr_bnd
	structure to the siginfo if extra_fields contains
	LINUX_SIGINFO_FIELD_ADDR_BND.

2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>

	* linux-tdep.h (linux_get_siginfo_type_with_fields): Make extern.
	* linux-tdep.c (linux_get_siginfo_type_with_fields): Make extern.
	* i386-linux-tdep.h (x86_linux_get_siginfo_type): New
	function.
	* amd64-linux-tdep.c (amd64_linux_init_abi_common): Add
	x86_linux_get_siginfo_type for the amd64 abi.
	* i386-linux-tdep.c (x86_linux_get_siginfo_type): New
	function.
	(i386_linux_init_abi): Add new function at the i386 ABI
	initialization.

2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>

	* linux-tdep.h (linux_siginfo_extra_field_values): New enum values.
	(linux_siginfo_extra_fields): New enum type.
	* linux-tdep.c (linux_get_siginfo_type_with_fields): New function.
	(linux_get_siginfo_type): Use new function.

2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>

	* nat/amd64-linux-siginfo.c: New file.
	* nat/amd64-linux-siginfo.h: New file.
	* Makefile.in (HFILES_NO_SRCDIR): Add nat/amd64-linux-siginfo.h.
	(amd64-linux-siginfo.o): New rule.
	* config/i386/linux64.mh (NATDEPFILES): Add amd64-linux-siginfo.o.
	* amd64-linux-nat.c (nat/amd64-linux-siginfo.h): New include.
	(compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
	(compat_x32_siginfo_from_siginfo, siginfo_from_compat_x32_siginfo)
	(compat_timeval, compat_sigval, compat_x32_clock, cpt_si_pid)
	(cpt_si_uid, cpt_si_timerid, cpt_si_overrun, cpt_si_status)
	(cpt_si_utime, cpt_si_stime, cpt_si_ptr, cpt_si_addr, cpt_si_band)
	(cpt_si_fd, si_timerid, si_overrun): Move to nat/amd64-linux-siginfo.c.

2016-02-01  Andrew Burgess  <andrew.burgess@embecosm.com>

	* value.c (max_value_size): New variable.
	(MIN_VALUE_FOR_MAX_VALUE_SIZE): New define.
	(set_max_value_size): New function.
	(show_max_value_size): New function.
	(check_type_length_before_alloc): New function.
	(allocate_value_contents): Call check_type_length_before_alloc.
	(set_value_enclosing_type): Likewise.
	(_initialize_values): Add set/show handler for max-value-size.
	* NEWS: Mention new set/show command.

2016-01-31  Simon Marchi  <simon.marchi@polymtl.ca>

	* varobj.h (struct varobj): Fix typos in comments.
	(struct lang_varobj_ops): Likewise.
	* varobj.c (VAROBJ_TABLE_SIZE): Likewise.
	(varobj_create): Move misplaced comment.

2016-01-29  Simon Marchi  <simon.marchi@ericsson.com>

	* aarch64-tdep.c (aarch64_record_asimd_load_store): Add braces
	to for include additional lines.
	* xcoffread.c (scan_xcoff_symtab): Remove unnecessary braces.

2016-01-28  Simon Marchi  <simon.marchi@ericsson.com>

	* gnulib/import/Makefile.am: Regenerate.
	* gnulib/import/Makefile.in: Regenerate.
	* gnulib/import/m4/gnulib-cache.m4: Regenerate.
	* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add rawmemchr.

2016-01-28  Simon Marchi  <simon.marchi@ericsson.com>

	* remote.c (skip_to_semicolon): Remove.
	(remote_parse_stop_reply): Use strchrnul instead of
	skip_to_semicolon.
	* gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add
	strchrnul.
	* gnulib/aclocal.m4: Regenerate.
	* gnulib/config.in: Regenerate.
	* gnulib/configure: Regenerate.
	* gnulib/import/Makefile.am: Regenerate.
	* gnulib/import/Makefile.in: Regenerate.
	* gnulib/import/m4/gnulib-cache.m4: Regenerate.
	* gnulib/import/m4/gnulib-comp.m4: Regenerate.
	* gnulib/import/m4/rawmemchr.m4: New file.
	* gnulib/import/m4/strchrnul.m4: New file.
	* gnulib/import/rawmemchr.c: New file.
	* gnulib/import/rawmemchr.valgrind: New file.
	* gnulib/import/strchrnul.c: New file.
	* gnulib/import/strchrnul.valgrind: New file.

2016-01-28  Yao Qi  <yao.qi@linaro.org>

	* breakpoint.c (build_target_command_list): Don't call continue
	if aexpr is NULL.
	(build_target_condition_list): Likewise.

2016-01-27  Kevin Buettner  <kevinb@redhat.com>

	* rx-tdep.c (rx_push_dummy_call): Treat scalars larger than 8
	bytes as aggregates.

2016-01-27  Joel Brobecker  <brobecker@adacore.com>

	* MAINTAINERS (Responsible Maintainers): Add Keith Seitz as
	Linespec Maintainers.

2016-01-26  Simon Marchi  <simon.marchi@ericsson.com>

	* common/common-utils.c (skip_spaces): Fix comment.
	(skip_to_space_const): Likewise.

2016-01-25  Yao Qi  <yao.qi@linaro.org>

	* arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw):
	Remove argument pc.  Get pc by regcache_read_pc.  Callers updated.
	(arm_deal_with_atomic_sequence_raw): Likewise.
	(thumb_get_next_pcs_raw): Likewise.
	(arm_get_next_pcs_raw): Likewise.
	(arm_get_next_pcs): Remove argument pc.  Callers updated.
	* arch/arm-get-next-pcs.h (arm_get_next_pcs): Update declaration.

2016-01-25  Mark Wielaard  <mjw@redhat.com>

	* ada-lang.c (ada_evaluate_subexp): Add proper else block.
	* c-typeprint.c (c_type_print_base): Fix misleading indentation of
	if statement.
	* inflow.c (child_terminal_ours_1): Fix misleading indentation of
	statement block by introducing an else.
	* linux-record.c (record_linux_sockaddr): Fix misleading indentation
	of return statements.
	(record_linux_msghdr): Likewise.

2016-01-25  Pedro Alves  <palves@redhat.com>

	PR threads/19461
	* infrun.c (handle_inferior_event_1) <fork/vfork>: Update
	parent/child running states.

2016-01-25  Pedro Alves  <palves@redhat.com>

	PR gdb/19494
	* linux-nat.c (kill_one_lwp): New, factored out from ...
	(kill_callback): ... this.
	(kill_wait_callback): New, factored out from ...
	(kill_wait_one_lwp): ... this.
	(kill_unfollowed_fork_children): New function.
	(linux_nat_kill): Use it.

2016-01-22  John Baldwin  <jhb@FreeBSD.org>

	* fbsd-nat.c (fbsd_pid_to_str): Adjust string format.

2016-01-22  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-nat.c (fetch_fpregs): Call perror_with_name
	instead of warning.
	(store_fpregs, fetch_regs, store_regs): Likewise.
	(fetch_wmmx_regs, store_wmmx_regs): Likewise.
	(fetch_vfp_regs, store_vfp_regs): Likewise.

2016-01-21  Doug Evans  <dje@google.com>

	* breakpoint.c (init_breakpoint_sal): Add comment.

2016-01-21  Marcin Kościelnicki  <koriakin@0x04.net>

	* ax-gdb.c (gen_traced_pop): Use gen_fetch for string collection.

2016-01-21  Andrew Burgess  <andrew.burgess@embecosm.com>

	* disasm.c (maybe_add_dis_line_entry): Rename to...
	(add_dis_line_entry): ...this, and update header comment.
	(do_mixed_source_and_assembly): Now use add_dis_line_entry.

2016-01-21  Pedro Alves  <palves@redhat.com>

	* Makefile.in (COMPILER_CFLAGS): New.
	(CXXFLAGS): Get it from configure.
	(INTERNAL_CFLAGS_BASE, INTERNAL_LDFLAGS): Use COMPILER_CFLAGS
	instead of CFLAGS.
	* build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Set and AC_SUBST
	COMPILER_CFLAGS.
	* configure: Regenerate.

2016-01-21  Joel Brobecker  <brobecker@adacore.com>

	* location.h (new_address_location): Add new parameters
	"addr_string" and "addr_string_len".
	(get_address_string_location): Add declaration.
	* location.c (new_address_location): Add new parameters
	"addr_string" and "addr_string_len".  If not NULL, store
	a copy of the addr_string in the new location as well.
	(get_address_string_location): New function.
	(string_to_event_location): Update call to new_address_location.
	* linespec.c (event_location_to_sals) <ADDRESS_LOCATION>:
	Save the event location in the parser's state before
	passing it to convert_address_location_to_sals.
	* breakpoint.c (create_thread_event_breakpoint): Update call
	to new_address_location.
	(init_breakpoint_sal): Get the event location's string, if any,
	and use it to update call to new_address_location.
	* python/py-finishbreakpoint.c (bpfinishpy_init):
	Update call to new_address_location.
	* spu-tdep.c (spu_catch_start): Likewise.

	* config/djgpp/fnchange.lst: Add entries for
	gdb/testsuite/gdb.base/break-fun-addr1.c and
	gdb/testsuite/gdb.base/break-fun-addr2.c.

2016-01-21  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-tdep.c (arm_linux_sigreturn_next_pc): Add parameter
	is_thumb and set it according to CPSR saved on the stack.
	(arm_linux_get_next_pcs_syscall_next_pc): Pass is_thumb to
	arm_linux_sigreturn_next_pc.

2016-01-20  Simon Marchi  <simon.marchi@polymtl.ca>

	* python/lib/gdb/printing.py (FlagEnumerationPrinter.__call__):
	Fix enumerators sort key function.

2016-01-20  Joel Brobecker  <brobecker@adacore.com>

	* printcmd.c (print_scalar_formatted): Move binary operator from
	end of line to beginning of next line.  Adjust formatting
	accordingly.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

	* fbsd-nat.c (fbsd_pid_to_exec_file): Use new "buflen" instead of
	"len" with sysctl.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

	* fbsd-tdep.c (find_stop_signal): Remove.
	(struct fbsd_collect_regset_section_cb) <lwp>: New field.
	<stop_signal>: New field.
	<abort_iteration>: New field.
	(fbsd_collect_regset_section_cb): Use new fields.
	(fbsd_collect_thread_registers): New function.
	(struct fbsd_corefile_thread_data): New structure.
	(fbsd_corefile_thread): New function.
	(fbsd_make_corefile_notes): Use new function to dump notes for each
	non-exited thread in a process.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

	* configure.ac: Check for support for LWP names on FreeBSD.
	* fbsd-nat.c [PT_LWPINFO] New variable debug_fbsd_lwp.
	[TDP_RFPPWAIT || HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]
	(fbsd_fetch_kinfo_proc): Move function earlier.
	[PT_LWPINFO] (fbsd_thread_alive): New function.
	[PT_LWPINFO] (fbsd_pid_to_str): New function.
	[HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME] (fbsd_thread_name): New function.
	[PT_LWP_EVENTS] (fbsd_enable_lwp_events): New function.
	[PT_LWPINFO] (fbsd_add_threads): New function.
	[PT_LWPINFO] (fbsd_update_thread_list): New function.
	[PT_LWPINFO] New variable super_resume.
	[PT_LWPINFO] (resume_one_thread_cb): New function.
	[PT_LWPINFO] (resume_all_threads_cb): New function.
	[PT_LWPINFO] (fbsd_resume): New function.
	(fbsd_remember_child): Save full ptid instead of plain pid.
	(fbsd_is_child_pending): Return ptid of saved child process.
	(fbsd_wait): Include lwp in returned ptid and switch to LWP ptid on
	first stop.
	[PT_LWP_EVENTS] Handle LWP events.
	[TDP_RFPPWAIT] Include LWP in child ptid.
	(fbsd_post_startup_inferior) [PT_LWP_EVENTS]: Enable LWP events.
	(fbsd_post_attach) [PT_LWP_EVENTS]: Enable LWP events.
	Add threads for existing processes.
	(fbsd_nat_add_target) [PT_LWPINFO]: Set "to_thread_alive" to
	"fbsd_thread_alive".
	Set "to_pid_to_str" to "fbsd_pid_to_str".
	[HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]: Set "to_thread_name" to
	"fbsd_thread_name".
	[PT_LWPINFO]: Set "to_update_thread_list" to "fbsd_update_thread_list".
	Set "to_has_thread_control" to "tc_schedlock".
	Set "to_resume" to "fbsd_resume".
	(_initialize_fbsd_nat): New function.
	* configure: Regenerate.
	* config.in: Regenerate.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

	* amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Use
	get_ptrace_pid.
	(amd64bsd_store_inferior_registers): Use get_ptrace_pid.
	(amd64bsd_dr_get): Use get_ptrace_pid.
	(amd64bsd_dr_set): Use get_ptrace_pid.
	* i386bsd-nat.c (i386bsd_fetch_inferior_registers): Use get_ptrace_pid.
	(i386bsd_store_inferior_registers): Use get_ptrace_pid.
	(i386bsd_dr_get): Use get_ptrace_pid.
	(i386bsd_dr_set): Use get_ptrace_pid.
	* inf-ptrace.c (get_ptrace_pid): Export.
	* inf-ptrace.h (get_ptrace_pid): Declare.
	* ppcfbsd-nat.c (ppcfbsd_fetch_inferior_registers): Use lwp id.
	(ppcfbsd_store_inferior_registers): Use lwp id.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

	* fbsd_tdep.c (fbsd_core_pid_to_str): New function.
	(fbsd_core_thread_name): New function.
	(fbsd_init_abi): Add "core_pid_to_str" gdbarch method.
	Add "core_thread_name" gdbarch method.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

	* corelow.c (core_thread_name): New function.
	(init_core_ops): Use "core_thread_name" for the "to_thread_name"
	target op.
	* gdbarch.sh (core_thread_name): New gdbarch callback.
	* gdbarch.h: Re-generate.
	* gdbarch.c: Re-generate.

2016-01-19  Simon Marchi  <simon.marchi@polymtl.ca>

	* python/lib/gdb/printing.py (_EnumInstance.to_string): Explicitly
	convert gdb.Value to integer type using int().

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

	* configure.ac: Include <sys/types.h when checking for "r_fs" in
	"struct reg".
	* configure: Regenerate.

2016-01-19  Pedro Alves  <palves@redhat.com>

	* ax-gdb.c (agent_command_1): Adjust call to decode_line_full.
	* break-catch-throw.c (re_set_exception_catchpoint): Pass the
	current program space down to linespec decoding and breakpoint
	location updating.
	* breakpoint.c (parse_breakpoint_sals): Adjust calls to
	decode_line_full.
	(until_break_command): Adjust calls to decode_line_1.
	(base_breakpoint_decode_location, bkpt_decode_location): Add
	'search_pspace' parameter.  Pass it along.
	(bkpt_probe_create_sals_from_location): Adjust calls to
	parse_probes.
	(tracepoint_decode_location, tracepoint_probe_decode_location)
	(strace_marker_decode_location): Add 'search_pspace' parameter.
	Pass it along.
	(all_locations_are_pending): Rewrite to take a breakpoint and
	program space as arguments instead.
	(hoist_existing_locations): New function.
	(update_breakpoint_locations): Add 'filter_pspace' parameter.  Use
	hoist_existing_locations instead of always removing all locations,
	and adjust to all_locations_are_pending change.
	(location_to_sals): Add 'search_pspace' parameter.  Pass it along.
	Don't disable the breakpoint if there are other locations in
	another program space.
	(breakpoint_re_set_default): Adjust to pass down the current
	program space as filter program space.
	(decode_location_default): Add 'search_pspace' parameter and pass
	it along.
	(prepare_re_set_context): Don't switch program space here.
	(breakpoint_re_set): Use save_current_space_and_thread instead of
	save_current_program_space.
	* breakpoint.h (struct breakpoint_ops) <decode_location>: Add
	'search_pspace' parameter.
	(update_breakpoint_locations): Add 'filter_pspace' parameter.
	* cli/cli-cmds.c (edit_command, list_command): Adjust calls to
	decode_line_1.
	* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current
	program space as filter program space.
	* linespec.c (struct linespec_state) <search_pspace>: New field.
	(create_sals_line_offset, convert_explicit_location_to_sals)
	(parse_linespec): Pass the search program space down.
	(linespec_state_constructor): Add 'search_pspace' parameter.
	Store it.
	(linespec_parser_new): Add 'search_pspace' parameter and pass it
	along.
	(linespec_lex_to_end): Adjust.
	(decode_line_full, decode_line_1): Add 'search_pspace' parameter
	and pass it along.
	(decode_line_with_last_displayed): Adjust.
	(collect_symtabs_from_filename, symtabs_from_filename): New
	'search_pspace' parameter.  Use it.
	(find_function_symbols): Pass the search program space down.
	* linespec.h (decode_line_1, decode_line_full): Add
	'search_pspace' parameter.
	* probe.c (parse_probes_in_pspace): New function, factored out
	from ...
	(parse_probes): ... this.  Add 'search_pspace' parameter and use
	it.
	* probe.h (parse_probes): Add pspace' parameter.
	* python/python.c (gdbpy_decode_line): Adjust.
	* tracepoint.c (scope_info): Adjust.

2016-01-18  Maciej W. Rozycki  <macro@imgtec.com>

	* mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
	instruction support.
	(micromips_next_pc): Likewise.
	(micromips_scan_prologue): Likewise.
	(micromips_deal_with_atomic_sequence): Likewise.
	(micromips_stack_frame_destroyed_p): Likewise.
	(mips_breakpoint_from_pc): Likewise.

2016-01-18  Maciej W. Rozycki  <macro@imgtec.com>

	* mips-tdep.c (micromips_insn_at_pc_has_delay_slot): Pass
	unshifted 16-bit microMIPS instruction word to `mips_insn_size'.

2016-01-18  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention that GDB now displays the ID and name of the
	thread that hit a breakpoint or received a signal.
	* break-catch-sig.c (signal_catchpoint_print_it): Use
	maybe_print_thread_hit_breakpoint.
	* break-catch-syscall.c (print_it_catch_syscall): Likewise.
	* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
	* breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
	(print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
	(print_it_catch_exec, print_it_ranged_breakpoint)
	(print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
	Use maybe_print_thread_hit_breakpoint.
	* breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
	* gdbthread.h (show_thread_that_caused_stop): Declare.
	* infrun.c (print_signal_received_reason): Print which thread
	received signal.
	* thread.c (show_thread_that_caused_stop): New function.

2016-01-18  Gary Benson  <gbenson@redhat.com>

	* nat/linux-namespaces.c (do_fork): New function.
	(linux_mntns_get_helper): Use the above.

2016-01-17  Jonas Hahnfeld <Hahnfeld@itc.rwth-aachen.de>  (tiny change)

	Pushed by Joel Brobecker  <brobecker@adacore.com>.
	PR gdb/19208
	* dwarf2read.c (read_partial_die): Do not call set_objfile_main_name
	if the function has no name.

2016-01-15  Sandra Loosemore  <sandra@codesourcery.com>

	* charset.c [PHONY_ICONV] (GDB_DEFAULT_HOST_CHARSET):
	Conditionalize for Windows host.
	(GDB_DEFAULT_TARGET_CHARSET): Match GDB_DEFAULT_HOST_CHARSET.
	(GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
	(phony_iconv_open): Handle both UTF-32 endiannesses.
	(phony_iconv): Likewise.  Check for output overflow and clean up
	out-of-input cases.  Correct adjustment to input buffer pointer.
	(set_be_le_names) [PHONY_ICONV]: Use hard-wired names to match
	phony_iconv_open.

2016-01-15  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention star wildcard ranges.
	* cli/cli-utils.c (get_number_or_range): Check state->in_range first.
	(number_range_setup_range): New function.
	* cli/cli-utils.h (number_range_setup_range): New declaration.
	* thread.c (thread_apply_command): Support star TID ranges.
	* tid-parse.c (tid_range_parser_finished)
	(tid_range_parser_string, tid_range_parser_skip)
	(get_tid_or_range, get_tid_or_range): Handle
	TID_RANGE_STATE_STAR_RANGE.
	(tid_range_parser_star_range): New function.
	* tid-parse.h (enum tid_range_state) <TID_RANGE_STATE_STAR_RANGE>:
	New value.
	(tid_range_parser_star_range): New declaration.

2016-01-15  Pedro Alves  <palves@redhat.com>

	* thread.c (thread_apply_command): Use the tid range parser to
	advance past the thread ID list.
	* tid-parse.c (get_positive_number_trailer): New function.
	(parse_thread_id): Use it.
	(get_tid_or_range): Use it.  Return 0 instead of throwing invalid
	thread ID error.
	(get_tid_or_range): Detect negative values.  Return 0 instead of
	throwing invalid thread ID error.

2016-01-14  Yao Qi  <yao.qi@linaro.org>

	* arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
	Declare.
	(arm_linux_get_next_pcs_ops): Install
	arm_linux_get_next_pcs_syscall_next_pc.
	(arm_linux_syscall_next_pc): Change to ...
	(arm_linux_get_next_pcs_syscall_next_pc): ... it.
	(arm_linux_init_abi): Don't set tdep->syscall_next_pc.
	* arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Declare.
	(arm_get_next_pcs_syscall_next_pc): Make it static.  Don't
	call tdep->syscall_next_pc.
	* arm-tdep.h (struct gdbarch_tdep) <syscall_next_pc>: Remove.
	(arm_get_next_pcs_syscall_next_pc): Remove.

2016-01-14  Yao Qi  <yao.qi@linaro.org>

	* remote.c (remote_set_syscall_catchpoint): Cast to char *.
	* thread.c (do_captured_thread_select): Cast to const char *.

2016-01-14  Yao Qi  <yao.qi@linaro.org>

	* arch/arm-get-next-pcs.c (arm_get_next_pcs_ctor): Change
	argument arm_thumb2_breakpoint to has_thumb2_breakpoint.
	(thumb_get_next_pcs_raw): Check has_thumb2_breakpoint
	instead.
	* arch/arm-get-next-pcs.h (struct arm_get_next_pcs)
	<arm_thumb2_breakpoint>: Remove.
	<has_thumb2_breakpoint>: New field.
	(arm_get_next_pcs_ctor): Update declaration.
	* arm-linux-tdep.c (arm_linux_software_single_step): Pass
	1 to arm_get_next_pcs_ctor.
	* arm-tdep.c (arm_software_single_step): Pass 0 to
	arm_get_next_pcs_ctor.

2016-01-13  Ulrich Weigand  <uweigand@de.ibm.com>

	* MAINTAINERS: Add Andreas Arnez as s390 target maintainer.

2016-01-13  Yao Qi  <yao.qi@linaro.org>

	* arch/arm-get-next-pcs.c (arm_get_next_pcs_raw): Use
	byte_order_for_code to read instruction.

2016-01-13  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention $_gthread.
	* gdbthread.h (struct thread_info) <global_num>: Mention
	$_gthread.
	* thread.c (thread_num_make_value_helper): New function.
	(thread_id_make_value): Delete.
	(thread_id_per_inf_num_make_value, global_thread_id_make_value):
	New.
	(thread_funcs): Adjust.
	(gthread_funcs): New.
	(_initialize_thread): Register $_gthread variable.

2016-01-13  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention "info threads -gid".
	* gdbthread.h (struct thread_info) <global_num>: Mention "info
	threads -gid".
	* thread.c (info_threads_command): Handle "-gid".
	(_initialize_thread): Adjust "info threads" help string to mention
	-gid.

2016-01-13  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention InferiorThread.global_num.
	* python/py-infthread.c (thpy_get_global_num): New function.
	(thread_object_getset): Register "global_num".

2016-01-13  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention that thread IDs are now per inferior and global
	thread IDs.
	* Makefile.in (SFILES): Add tid-parse.c.
	(COMMON_OBS): Add tid-parse.o.
	(HFILES_NO_SRCDIR): Add tid-parse.h.
	* ada-tasks.c: Adjust to use ptid_to_global_thread_id.
	* breakpoint.c (insert_breakpoint_locations)
	(remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
	(print_one_breakpoint_location, set_longjmp_breakpoint)
	(check_longjmp_breakpoint_for_call_dummy)
	(set_momentary_breakpoint): Adjust to use global IDs.
	(find_condition_and_thread, watch_command_1): Use parse_thread_id.
	(until_break_command, longjmp_bkpt_dtor)
	(breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
	to use global IDs.
	* dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
	ptid_to_global_thread_id.
	* elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
	* gdbthread.h (struct thread_info): Rename field 'num' to
	'global_num.  Add new fields 'per_inf_num' and 'inf'.
	(thread_id_to_pid): Rename thread_id_to_pid to
	global_thread_id_to_ptid.
	(pid_to_thread_id): Rename to ...
	(ptid_to_global_thread_id): ... this.
	(valid_thread_id): Rename to ...
	(valid_global_thread_id): ... this.
	(find_thread_id): Rename to ...
	(find_thread_global_id): ... this.
	(ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
	(print_thread_info): Add comment.
	* tid-parse.h: New file.
	* tid-parse.c: New file.
	* infcmd.c (step_command_fsm_prepare)
	(step_command_fsm_should_stop): Adjust to use the global thread
	ID.
	(until_next_command, until_next_command)
	(finish_command_fsm_should_stop): Adjust to use the global thread
	ID.
	(attach_post_wait): Adjust to check the inferior number too.
	* inferior.h (struct inferior) <highest_thread_num>: New field.
	* infrun.c (handle_signal_stop)
	(insert_exception_resume_breakpoint)
	(insert_exception_resume_from_probe): Adjust to use the global
	thread ID.
	* record-btrace.c (record_btrace_open): Use global thread IDs.
	* remote.c (process_initial_stop_replies): Also consider the
	inferior number.
	* target.c (target_pre_inferior): Clear the inferior's highest
	thread num.
	* thread.c (clear_thread_inferior_resources): Adjust to use the
	global thread ID.
	(new_thread): New inferior parameter.  Adjust to use it.  Set both
	the thread's global ID and the thread's per-inferior ID.
	(add_thread_silent): Adjust.
	(find_thread_global_id): New.
	(find_thread_id): Make static.  Adjust to rename.
	(valid_thread_id): Rename to ...
	(valid_global_thread_id): ... this.
	(pid_to_thread_id): Rename to ...
	(ptid_to_global_thread_id): ... this.
	(thread_id_to_pid): Rename to ...
	(global_thread_id_to_ptid): ... this.  Adjust.
	(first_thread_of_process): Adjust.
	(do_captured_list_thread_ids): Adjust to use global thread IDs.
	(should_print_thread): New function.
	(print_thread_info): Rename to ...
	(print_thread_info_1): ... this, and add new show_global_ids
	parameter.  Handle it.  Iterate over inferiors.
	(print_thread_info): Reimplement as wrapper around
	print_thread_info_1.
	(show_inferior_qualified_tids): New function.
	(print_thread_id): Use it.
	(tp_array_compar): Compare inferior numbers too.
	(thread_apply_command): Use tid_range_parser.
	(do_captured_thread_select): Use parse_thread_id.
	(thread_id_make_value): Adjust.
	(_initialize_thread): Adjust "info threads" help string.
	* varobj.c (struct varobj_root): Update comment.
	(varobj_create): Adjust to use global thread IDs.
	(value_of_root_1): Adjust to use global_thread_id_to_ptid.
	* windows-tdep.c (display_tib): No longer accept an argument.
	* cli/cli-utils.c (get_number_trailer): Make extern.
	* cli/cli-utils.h (get_number_trailer): Declare.
	(get_number_const): Adjust documentation.
	* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
	thread IDs.
	* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
	(mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
	* mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
	* guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
	Likewise.
	* python/py-breakpoint.c (bppy_set_thread): Likewise.
	* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
	* python/py-infthread.c (thpy_get_num): Add comment and return the
	per-inferior thread ID.
	(thread_object_getset): Update comment of "num".

2016-01-13  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (remove_threaded_breakpoints)
	(print_one_breakpoint_location): Use print_thread_id.
	* btrace.c (btrace_enable, btrace_disable, btrace_teardown)
	(btrace_fetch, btrace_clear): Use print_thread_id.
	* common/print-utils.c (CELLSIZE): Delete.
	(get_cell): Rename to ...
	(get_print_cell): ... this and made extern.  Adjust call callers.
	Adjust to use PRINT_CELL_SIZE.
	* common/print-utils.h (get_print_cell): Declare.
	(PRINT_CELL_SIZE): New.
	* gdbthread.h (print_thread_id): Declare.
	* infcmd.c (signal_command): Use print_thread_id.
	* inferior.c (print_inferior): Use print_thread_id.
	* infrun.c (handle_signal_stop)
	(insert_exception_resume_breakpoint)
	(insert_exception_resume_from_probe)
	(print_signal_received_reason): Use print_thread_id.
	* record-btrace.c (record_btrace_info)
	(record_btrace_resume_thread, record_btrace_cancel_resume)
	(record_btrace_step_thread, record_btrace_wait): Use
	print_thread_id.
	* thread.c (thread_apply_all_command): Use print_thread_id.
	(print_thread_id): New function.
	(thread_apply_command): Use print_thread_id.
	(thread_command, thread_find_command, do_captured_thread_select):
	Use print_thread_id.

2016-01-13  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention InferiorThread.inferior.
	* python/py-infthread.c (thpy_get_inferior): New.
	(thread_object_getset): Register "inferior".

2016-01-13  Pedro Alves  <palves@redhat.com>

	* NEWS: Mention $_inferior.
	* inferior.c (inferior_id_make_value): New.
	(inferior_funcs): New.
	(_initialize_inferior): Create $_inferior variable.

2016-01-13  Pedro Alves  <palves@redhat.com>

	PR breakpoints/19388
	* frame.c (get_current_frame): Use validate_registers_access.
	* gdbthread.h (validate_registers_access): Declare.
	* infrun.c (validate_siginfo_access): Delete.
	(siginfo_value_read, siginfo_value_write): Use
	validate_registers_access.
	* thread.c (validate_registers_access): New function.

2016-01-12  Josh Stone  <jistone@redhat.com>
	    Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
	syscall_entry and syscall_return stop reasons.  Mention GDB
	support for remote catch syscall.
	* remote.c (PACKET_QCatchSyscalls): New enum.
	(remote_set_syscall_catchpoint): New function.
	(remote_protocol_features): New element for QCatchSyscalls.
	(remote_parse_stop_reply): Parse syscall_entry/return stops.
	(init_remote_ops): Install remote_set_syscall_catchpoint.
	(_initialize_remote): Config QCatchSyscalls.
	* linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.

2016-01-12  Yao Qi  <yao.qi@linaro.org>

	* nat/linux-ptrace.c (linux_child_function): Cast child_stack
	to gdb_byte * and pass to linux_fork_to_function.

2016-01-12  Yao Qi  <yao.qi@linaro.org>

	* nat/linux-ptrace.c (linux_fork_to_function): Change type
	of argument 'function'.
	(linux_grandchild_function): Change return type to 'int'.
	Change child_stack's type to 'void *'.
	(linux_child_function): Likewise.

2016-01-12  Pedro Alves  <palves@redhat.com>

	Remove use of the registered trademark symbol throughout.

2016-01-12  Thomas Schwinge  <thomas@codesourcery.com>

	* reply_mig_hack.awk: Rewrite one regular expression.

2016-01-11  Mike Frysinger  <vapier@gentoo.org>

	* acinclude.m4: Include new warning.m4 file.
	* configure: Regenerated.
	* configure.ac: Move all warning logic ...
	* warning.m4: ... here.

2016-01-08  Yao Qi  <yao.qi@linaro.org>

	* extension.c: Include target.h.
	(set_active_ext_lang): Only call install_gdb_sigint_handler,
	check_quit_flag, and set_quit_flag if target_terminal_is_ours
	returns false.
	(restore_active_ext_lang): Likewise.
	* target.c (target_terminal_is_ours): New function.
	* target.h (target_terminal_is_ours): Declare.

2016-01-07  Maciej W. Rozycki  <macro@imgtec.com>

	* mips-tdep.c (mips_breakpoint_from_pc): Rename local `status'
	to `err' in the little-endian leg.

2016-01-06  Yao Qi  <yao.qi@linaro.org>

	* arch/arm-get-next-pcs.c (arm_get_next_pcs): Move it to some
	lines below.
	(thumb_get_next_pcs_raw): Make it static.
	(arm_get_next_pcs_raw): Likewise.
	* arch/arm-get-next-pcs.h (thumb_get_next_pcs_raw): Remove the
	declaration.
	(arm_get_next_pcs_raw): Likewise.

2016-01-05  Mike Frysinger  <vapier@gentoo.org>

	* version.in: Change cvs to git.

2016-01-05  Mike Frysinger  <vapier@gentoo.org>

	* configure.tgt (score-*-*): Delete gdb_sim assignment.

2016-01-05  Pedro Alves  <palves@redhat.com>

	PR sim/13418
	* configure.ac: Define WITH_PPC_SIM when linking in the sim and
	the target is powerpc*.
	* rs6000-tdep.c (init_sim_regno_table): Check WITH_PPC_SIM instead
	of WITH_SIM.
	* configure: Regenerate.
	* config.in: Regenerate.

2016-01-04  Markus Metzger  <markus.t.metzger@intel.com>

	* btrace.c (btrace_pt_readmem_callback): Do not return in TRY/CATCH.

2016-01-02  Mike Frysinger  <vapier@gentoo.org>

	* configure.tgt (powerpc*-*-*): Delete test call and
	always assign gdb_sim.

2016-01-01  Joel Brobecker  <brobecker@adacore.com>

	Update year range in copyright notice of all files.

2016-01-01  Joel Brobecker  <brobecker@adacore.com>

	* top.c (print_gdb_version): Change copyright year in version
	message.

2016-01-01  Joel Brobecker  <brobecker@adacore.com>

	* config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2015.

For older changes see ChangeLog-2015.
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: