[deliverable/binutils-gdb.git] / gdb / configure.nat

# ; -*- mode: sh ; -*-
# Copyright (C) 2013-2017 Free Software Foundation, Inc.
#
# This file is part of GDB.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# Variables defined here:
#
# NAT_FILE - The header file with definitions for this native target.
#
# NATDEPFILES - Source files required for native debugging on this
#               native target.
#
# NAT_CDEPS - Dynamic symbols to be exported for libthread_db.
#
# LOADLIBES - Libraries against which GDB will be linked for this
#             native target.
#
# MH_CFLAGS - Additional CFLAGS for this host.
#
# XM_CLIBS - Host-dependent libraries against which GDB will be linked
#            for this native target.
#
# HAVE_NATIVE_GCORE_HOST - Whether gcore should be installed on this
#                          native target.
#
# nat_extra_makefile_frag - File containing extra fragments of
#                           Makefile that will be used by this native
#                           target.
#
# Notes:
#
# - To avoid shell expansion of variables, declare them with single
#   quotes.
#
# - nat_extra_makefile_frag should contain the full path of the file.


case ${gdb_host_cpu} in
  aarch64)
    case ${gdb_host} in
      linux)
	#  Host: AArch64 based machine running GNU/Linux
	NAT_FILE='config/nm-linux.h'
	NATDEPFILES='inf-ptrace.o fork-child.o aarch64-linux-nat.o aarch32-linux-nat.o \
		proc-service.o linux-thread-db.o linux-nat.o linux-fork.o \
		linux-procfs.o linux-ptrace.o linux-osdata.o linux-waitpid.o \
		linux-personality.o linux-namespaces.o aarch64-linux-hw-point.o \
		aarch64-linux.o'
	NAT_CDEPS='$(srcdir)/proc-service.list'

	LOADLIBES='-ldl $(RDYNAMIC)'
	;;
    esac
    ;;
  alpha)
    case ${gdb_host} in
      alpha-linux)
	# Host: Little-endian Alpha running Linux
	NAT_FILE='config/nm-linux.h'
	NATDEPFILES='inf-ptrace.o alpha-linux-nat.o \
		fork-child.o proc-service.o linux-thread-db.o \
		linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
		linux-waitpid.o linux-personality.o linux-namespaces.o'
	NAT_CDEPS='$(srcdir)/proc-service.list'

	# The dynamically loaded libthread_db needs access to symbols in the
	# gdb executable.
	LOADLIBES='-ldl $(RDYNAMIC)'

	# doublest.c currently assumes some properties of FP arithmetic
	# on the host which require this.
	MH_CFLAGS='-mieee'
	;;
      nbsd)
	# Host: NetBSD/alpha
	NATDEPFILES='fork-child.o inf-ptrace.o alpha-bsd-nat.o bsd-kvm.o'

	LOADLIBES='-lkvm'
	;;
    esac
    ;;
  arm)
    case ${gdb_host} in
      linux)
	# Host: ARM based machine running GNU/Linux
	NAT_FILE='config/nm-linux.h'
	NATDEPFILES='inf-ptrace.o fork-child.o arm-linux-nat.o \
		aarch32-linux-nat.o proc-service.o linux-thread-db.o \
		linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
		linux-waitpid.o linux-personality.o linux-namespaces.o'
	NAT_CDEPS='$(srcdir)/proc-service.list'

	LOADLIBES='-ldl $(RDYNAMIC)'
	;;
      nbsdelf)
	# Host: NetBSD/arm
	NATDEPFILES='fork-child.o inf-ptrace.o arm-nbsd-nat.o'
	;;
    esac
    ;;
  i386)
    case ${gdb_host} in
      cygwin64)
	#  Native config information for GDB on PowerPC systems running FreeBSD.
	NATDEPFILES='x86-nat.o x86-dregs.o windows-nat.o amd64-windows-nat.o'
	;;
      cygwin)
	MH_CFLAGS=
	NATDEPFILES='x86-nat.o x86-dregs.o windows-nat.o i386-windows-nat.o'
	XM_CLIBS=
	;;
      darwin)
	# Host: IA86 running Darwin
	NATDEPFILES='fork-child.o darwin-nat.o \
	     i386-darwin-nat.o x86-nat.o x86-dregs.o amd64-nat.o darwin-nat-info.o'
	;;
      fbsd64)
	# Host: FreeBSD/amd64
	NATDEPFILES='fork-child.o inf-ptrace.o \
		fbsd-nat.o amd64-nat.o amd64-bsd-nat.o amd64-fbsd-nat.o \
		bsd-kvm.o x86-nat.o x86-dregs.o x86-bsd-nat.o'
	HAVE_NATIVE_GCORE_HOST=1

	LOADLIBES='-lkvm'
	;;
      fbsd)
	# Host: FreeBSD/i386
	NATDEPFILES='fork-child.o inf-ptrace.o \
		fbsd-nat.o x86-nat.o x86-dregs.o x86-bsd-nat.o i386-bsd-nat.o \
		i386-fbsd-nat.o bsd-kvm.o'
	NAT_FILE='nm-fbsd.h'
	HAVE_NATIVE_GCORE_HOST=1

	LOADLIBES='-lkvm'
	;;
      go32)
	# Host: Intel x86 running DJGPP

	# We include several header files from config/djgpp
	MH_CFLAGS='-I$(srcdir)/config/djgpp'

	NATDEPFILES='go32-nat.o x86-nat.o x86-dregs.o'

	XM_CLIBS='-ldbg'
	;;
      i386gnu)
	# Host: Intel 386 running the GNU Hurd
	NATDEPFILES='i386-gnu-nat.o gnu-nat.o \
		     x86-nat.o x86-dregs.o fork-child.o \
		     notify_S.o process_reply_S.o msg_reply_S.o \
		     msg_U.o exc_request_U.o exc_request_S.o'
	HAVE_NATIVE_GCORE_HOST=1

	NAT_FILE='nm-i386gnu.h'
	MH_CFLAGS='-D_GNU_SOURCE'

	XM_CLIBS='-lshouldbeinlibc'

	nat_extra_makefile_frag="${srcdir}/config/${gdb_host_cpu}/i386gnu.mn"
	;;
      i386sol2)
	# Host: Solaris x86
	NATDEPFILES='fork-child.o i386-v4-nat.o i386-sol2-nat.o \
		procfs.o proc-api.o proc-events.o proc-flags.o proc-why.o'
	HAVE_NATIVE_GCORE_HOST=1
	;;
      linux64)
	# Host: GNU/Linux x86-64
	NATDEPFILES='inf-ptrace.o fork-child.o \
		x86-nat.o x86-dregs.o amd64-nat.o amd64-linux-nat.o \
		x86-linux-nat.o \
		linux-nat.o linux-osdata.o \
		proc-service.o linux-thread-db.o linux-fork.o \
		linux-procfs.o linux-ptrace.o linux-btrace.o \
		linux-waitpid.o linux-personality.o x86-linux.o \
		x86-linux-dregs.o amd64-linux-siginfo.o linux-namespaces.o'
	NAT_FILE='config/nm-linux.h'
	NAT_CDEPS='$(srcdir)/proc-service.list'

	# The dynamically loaded libthread_db needs access to symbols in the
	# gdb executable.
	LOADLIBES='-ldl $(RDYNAMIC)'
	;;
      linux)
	# Host: Intel 386 running GNU/Linux.
	NAT_FILE='config/nm-linux.h'
	NATDEPFILES='inf-ptrace.o fork-child.o \
		x86-nat.o x86-dregs.o i386-linux-nat.o x86-linux-nat.o \
		proc-service.o linux-thread-db.o \
		linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
		linux-btrace.o linux-waitpid.o linux-personality.o x86-linux.o \
		x86-linux-dregs.o linux-namespaces.o'
	NAT_CDEPS='$(srcdir)/proc-service.list'

	# The dynamically loaded libthread_db needs access to symbols in the
	# gdb executable.
	LOADLIBES='-ldl $(RDYNAMIC)'
	;;
      mingw64)
	NATDEPFILES='x86-nat.o x86-dregs.o windows-nat.o amd64-windows-nat.o'
	;;
      mingw)
	MH_CFLAGS=
	NATDEPFILES='x86-nat.o x86-dregs.o windows-nat.o i386-windows-nat.o'
	XM_CLIBS=
	;;
      nbsd64)
	# Host: NetBSD/amd64
	NATDEPFILES='fork-child.o inf-ptrace.o \
		nbsd-nat.o amd64-nat.o x86-bsd-nat.o amd64-bsd-nat.o amd64-nbsd-nat.o'
	;;
      nbsdelf)
	# Host: NetBSD/i386 ELF
	NATDEPFILES='fork-child.o inf-ptrace.o \
		nbsd-nat.o x86-bsd-nat.o i386-bsd-nat.o i386-nbsd-nat.o bsd-kvm.o'

	LOADLIBES='-lkvm'
	;;
      nto)
	# Host: Intel 386 running QNX.
	NATDEPFILES='nto-procfs.o'
	NAT_FILE='config/nm-nto.h'
	;;
      obsd64)
	# Host: OpenBSD/amd64
	NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o \
		amd64-nat.o x86-bsd-nat.o amd64-bsd-nat.o amd64-obsd-nat.o bsd-kvm.o'

	LOADLIBES='-lkvm'
	;;
      obsd)
	# Host: OpenBSD/i386 ELF
	NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o \
		x86-bsd-nat.o i386-bsd-nat.o i386-obsd-nat.o bsd-kvm.o'

	LOADLIBES='-lkvm'
	;;
      sol2-64)
	# Host: Solaris x86_64
	NATDEPFILES='fork-child.o amd64-nat.o i386-v4-nat.o i386-sol2-nat.o \
		procfs.o proc-api.o proc-events.o proc-flags.o proc-why.o'
	HAVE_NATIVE_GCORE_HOST=1
	;;
    esac
    ;;
  ia64)
    case ${gdb_host} in
      linux)
	# Host: Intel IA-64 running GNU/Linux
	NAT_FILE='config/nm-linux.h'
	NATDEPFILES='inf-ptrace.o fork-child.o \
		ia64-linux-nat.o \
		proc-service.o linux-thread-db.o \
		linux-nat.o linux-osdata.o linux-fork.o \
		linux-personality.o \
		linux-procfs.o linux-ptrace.o linux-waitpid.o \
		linux-namespaces.o'
	NAT_CDEPS='$(srcdir)/proc-service.list'

	LOADLIBES='-ldl $(RDYNAMIC)'
	;;
    esac
    ;;
  m32r)
    case ${gdb_host} in
      linux)
	# Host: M32R based machine running GNU/Linux
	NAT_FILE='config/nm-linux.h'
	NATDEPFILES='inf-ptrace.o fork-child.o				\
		m32r-linux-nat.o proc-service.o linux-thread-db.o	\
		linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
		linux-waitpid.o linux-personality.o linux-namespaces.o'
	NAT_CDEPS='$(srcdir)/proc-service.list'

	LOADLIBES='-ldl $(RDYNAMIC)'
	;;
    esac
    ;;
  m68k)
    case ${gdb_host} in
      linux)
	# Host: Motorola m68k running GNU/Linux.
	NAT_FILE='config/nm-linux.h'
	NATDEPFILES='inf-ptrace.o fork-child.o \
		m68k-linux-nat.o \
		proc-service.o linux-thread-db.o \
		linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
		linux-personality.o \
		linux-waitpid.o linux-namespaces.o'
	NAT_CDEPS='$(srcdir)/proc-service.list'

	# The dynamically loaded libthread_db needs access to symbols in the
	# gdb executable.
	LOADLIBES='-ldl $(RDYNAMIC)'
	;;
      nbsdelf)
	# Host: NetBSD/m68k ELF
	NATDEPFILES='m68k-bsd-nat.o bsd-kvm.o fork-child.o inf-ptrace.o'

	LOADLIBES='-lkvm'
	;;
      obsd)
	# Host: OpenBSD/m68k
	NATDEPFILES='m68k-bsd-nat.o bsd-kvm.o fork-child.o inf-ptrace.o'

	LOADLIBES='-lkvm'
	;;
    esac
    ;;
  m88k)
    case ${gdb_host} in
      obsd)
	# Host: OpenBSD/m88k
	NATDEPFILES='fork-child.o inf-ptrace.o m88k-bsd-nat.o'
	;;
    esac
    ;;
  mips)
    case ${gdb_host} in
      fbsd)
	# Host: FreeBSD/mips
	NATDEPFILES='fork-child.o inf-ptrace.o fbsd-nat.o mips-fbsd-nat.o'
	HAVE_NATIVE_GCORE_HOST=1
	;;
      linux)
	# Host: Linux/MIPS
	NAT_FILE='config/nm-linux.h'
	NATDEPFILES='inf-ptrace.o fork-child.o mips-linux-nat.o \
		linux-thread-db.o proc-service.o \
		linux-nat.o linux-osdata.o linux-fork.o \
		linux-procfs.o linux-ptrace.o linux-waitpid.o \
		linux-personality.o \
		mips-linux-watch.o linux-namespaces.o'
	NAT_CDEPS='$(srcdir)/proc-service.list'

	LOADLIBES='-ldl $(RDYNAMIC)'
	;;
      nbsd)
	# Host: NetBSD/mips
	NATDEPFILES='fork-child.o inf-ptrace.o mips-nbsd-nat.o'
	;;
      obsd64)
	# Host: OpenBSD/mips64
	NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o mips64-obsd-nat.o'
	;;
    esac
    ;;
  pa)
    case ${gdb_host} in
      linux)
	# Host: Hewlett-Packard PA-RISC machine, running Linux
	NAT_FILE='config/nm-linux.h'
	NATDEPFILES='inf-ptrace.o fork-child.o \
		hppa-linux-nat.o proc-service.o linux-thread-db.o \
		linux-nat.o linux-osdata.o linux-fork.o \
		linux-procfs.o linux-ptrace.o linux-waitpid.o \
		linux-personality.o linux-namespaces.o'
	NAT_CDEPS='$(srcdir)/proc-service.list'

	LOADLIBES='-ldl $(RDYNAMIC)'
	;;
      nbsd)
	# Host: NetBSD/hppa
	NATDEPFILES='fork-child.o inf-ptrace.o nbsd-nat.o hppa-nbsd-nat.o'
	;;
      obsd)
	# Host: OpenBSD/hppa
	NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o hppa-obsd-nat.o'
	;;
    esac
    ;;
  powerpc)
    case ${gdb_host} in
      aix)
	# Host: IBM PowerPC running AIX
	# aix-thread.o is not listed in NATDEPFILES as it is pulled in by configure.
	NATDEPFILES='fork-child.o inf-ptrace.o rs6000-nat.o'

	# When compiled with cc, for debugging, this argument should be passed.
	# We have no idea who our current compiler is though, so we skip it.
	# MH_CFLAGS='-bnodelcsect'
	;;
      fbsd)
	#  Native config information for GDB on PowerPC systems running FreeBSD.
	NATDEPFILES='fbsd-nat.o fork-child.o inf-ptrace.o ppc-fbsd-nat.o bsd-kvm.o'
	HAVE_NATIVE_GCORE_HOST=1

	LOADLIBES='-lkvm'
	;;
      linux)
	# Host: PowerPC, running Linux
	XM_CLIBS=

	NAT_FILE='config/nm-linux.h'
	NATDEPFILES='inf-ptrace.o fork-child.o \
		ppc-linux-nat.o proc-service.o linux-thread-db.o \
		linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
		linux-waitpid.o linux-personality.o linux-namespaces.o'
	NAT_CDEPS='$(srcdir)/proc-service.list'

	LOADLIBES='-ldl $(RDYNAMIC)'
	;;
      nbsd)
	# Host: NetBSD/powerpc
	NATDEPFILES='fork-child.o inf-ptrace.o ppc-nbsd-nat.o bsd-kvm.o'

	LOADLIBES='-lkvm'
	;;
      obsd)
	# Host: OpenBSD/powerpc
	NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o ppc-obsd-nat.o bsd-kvm.o'

	LOADLIBES='-lkvm'
	;;
      ppc64-linux)
	# Host: PowerPC64, running Linux
	XM_CLIBS=

	NAT_FILE='config/nm-linux.h'
	NATDEPFILES='inf-ptrace.o fork-child.o \
		ppc-linux-nat.o proc-service.o linux-thread-db.o \
		linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
		linux-waitpid.o ppc-linux.o linux-personality.o \
		linux-namespaces.o'
	NAT_CDEPS='$(srcdir)/proc-service.list'

	# The dynamically loaded libthread_db needs access to symbols in the
	# gdb executable.
	LOADLIBES='-ldl $(RDYNAMIC)'
	;;
      spu-linux)
	# Target: Cell BE (PowerPC64 + SPU)
	# This implements a 'pseudo-native' GDB running on the
	# PPU side of the Cell BE and debugging the SPU side.

	NATDEPFILES='spu-linux-nat.o fork-child.o inf-ptrace.o \
		      linux-procfs.o linux-ptrace.o linux-waitpid.o \
		      linux-personality.o linux-namespaces.o'
	;;
    esac
    ;;
  s390)
    case ${gdb_host} in
      linux)
	# Host: S390, running Linux
	NAT_FILE='config/nm-linux.h'
	NATDEPFILES='inf-ptrace.o fork-child.o s390-linux-nat.o \
		linux-thread-db.o proc-service.o \
		linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
		linux-personality.o \
		linux-waitpid.o linux-namespaces.o'
	NAT_CDEPS='$(srcdir)/proc-service.list'
	LOADLIBES='-ldl $(RDYNAMIC)'
	;;
    esac
    ;;
  sh)
    case ${gdb_host} in
      nbsd)
	# Host: NetBSD/sh
	NATDEPFILES='fork-child.o inf-ptrace.o sh-nbsd-nat.o'
	;;
    esac
    ;;
  sparc)
    case ${gdb_host} in
      fbsd)
	# Host: FreeBSD/sparc64
	NATDEPFILES='fork-child.o inf-ptrace.o \
		fbsd-nat.o sparc-nat.o sparc64-nat.o sparc64-fbsd-nat.o \
		bsd-kvm.o'
	HAVE_NATIVE_GCORE_HOST=1

	LOADLIBES='-lkvm'
	;;
      linux64)
	# Host: GNU/Linux UltraSPARC
	NAT_FILE='config/nm-linux.h'
	NATDEPFILES='sparc-nat.o sparc64-nat.o sparc64-linux-nat.o \
		fork-child.o inf-ptrace.o \
		proc-service.o linux-thread-db.o \
		linux-nat.o linux-osdata.o linux-fork.o \
		linux-procfs.o linux-ptrace.o linux-waitpid.o \
		linux-personality.o linux-namespaces.o'
	NAT_CDEPS='$(srcdir)/proc-service.list'

	# The dynamically loaded libthread_db needs access to symbols in the
	# gdb executable.
	LOADLIBES='-ldl $(RDYNAMIC)'
	;;
      linux)
	# Host: GNU/Linux SPARC
	NAT_FILE='config/nm-linux.h'
	NATDEPFILES='sparc-nat.o sparc-linux-nat.o \
		fork-child.o inf-ptrace.o \
		proc-service.o linux-thread-db.o \
		linux-nat.o linux-osdata.o linux-fork.o \
		linux-procfs.o linux-ptrace.o linux-waitpid.o \
		linux-personality.o linux-namespaces.o'
	NAT_CDEPS='$(srcdir)/proc-service.list'

	# The dynamically loaded libthread_db needs access to symbols in the
	# gdb executable.
	LOADLIBES='-ldl $(RDYNAMIC)'
	;;
      nbsd64)
	# Host: NetBSD/sparc64
	NATDEPFILES='fork-child.o inf-ptrace.o \
		sparc64-nbsd-nat.o sparc-nat.o bsd-kvm.o'

	LOADLIBES='-lkvm'
	;;
      nbsdelf)
	# Host: NetBSD/sparc ELF
	NATDEPFILES='fork-child.o inf-ptrace.o \
		sparc-nat.o sparc-nbsd-nat.o bsd-kvm.o'

	LOADLIBES='-lkvm'
	;;
      obsd64)
	# Host: OpenBSD/sparc64
	NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o \
		sparc64-obsd-nat.o sparc-nat.o bsd-kvm.o'

	LOADLIBES='-lkvm'
	;;
      sol2)
	# Host: Solaris SPARC & UltraSPARC
	NAT_FILE='nm-sol2.h'
	NATDEPFILES='sparc-sol2-nat.o \
		fork-child.o \
		procfs.o proc-api.o proc-events.o proc-flags.o proc-why.o'
	HAVE_NATIVE_GCORE_HOST=1
	;;
    esac
    ;;
  tilegx)
    case ${gdb_host} in
      linux)
	# Host: Tilera TILE-Gx running GNU/Linux.
	NAT_FILE='config/nm-linux.h'
	NATDEPFILES='inf-ptrace.o fork-child.o \
		tilegx-linux-nat.o \
		proc-service.o linux-thread-db.o \
		linux-nat.o linux-osdata.o linux-fork.o \
		linux-procfs.o linux-ptrace.o linux-waitpid.o \
		linux-personality.o linux-namespaces.o'

	# The dynamically loaded libthread_db needs access to symbols in the
	# gdb executable.
	LOADLIBES='-ldl $(RDYNAMIC)'
	;;
    esac
    ;;
  vax)
    case ${gdb_host} in
      nbsdelf)
	# Host: NetBSD/vax ELF
	NATDEPFILES='fork-child.o inf-ptrace.o \
		vax-bsd-nat.o bsd-kvm.o'

	LOADLIBES='-lkvm'
	;;
      obsd)
	# Host: OpenBSD/vax
	NATDEPFILES='fork-child.o inf-ptrace.o \
		vax-bsd-nat.o bsd-kvm.o'

	LOADLIBES='-lkvm'
	;;
    esac
    ;;
  xtensa)
    case ${gdb_host} in
      linux)
	# Host: Xtensa, running GNU/Linux.
	NAT_FILE='config/nm-linux.h'

	NATDEPFILES='inf-ptrace.o fork-child.o xtensa-linux-nat.o \
		linux-thread-db.o proc-service.o \
		linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
		linux-waitpid.o linux-personality.o linux-namespaces.o'
	NAT_CDEPS='$(srcdir)/proc-service.list'

	LOADLIBES='-ldl $(RDYNAMIC)'
	;;
    esac
    ;;
esac
Commit	Line	Data
21ea5acd SDJ	1	# ; -- mode: sh ; --
	2	# Copyright (C) 2013-2017 Free Software Foundation, Inc.
	3	#
	4	# This file is part of GDB.
	5	#
	6	# This program is free software; you can redistribute it and/or modify
	7	# it under the terms of the GNU General Public License as published by
	8	# the Free Software Foundation; either version 3 of the License, or
	9	# (at your option) any later version.
	10	#
	11	# This program is distributed in the hope that it will be useful,
	12	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	# GNU General Public License for more details.
	15	#
	16	# You should have received a copy of the GNU General Public License
	17	# along with this program. If not, see <http://www.gnu.org/licenses/>.
	18
	19	# Variables defined here:
	20	#
	21	# NAT_FILE - The header file with definitions for this native target.
	22	#
	23	# NATDEPFILES - Source files required for native debugging on this
	24	# native target.
	25	#
	26	# NAT_CDEPS - Dynamic symbols to be exported for libthread_db.
	27	#
	28	# LOADLIBES - Libraries against which GDB will be linked for this
	29	# native target.
	30	#
	31	# MH_CFLAGS - Additional CFLAGS for this host.
	32	#
	33	# XM_CLIBS - Host-dependent libraries against which GDB will be linked
	34	# for this native target.
	35	#
	36	# HAVE_NATIVE_GCORE_HOST - Whether gcore should be installed on this
	37	# native target.
	38	#
	39	# nat_extra_makefile_frag - File containing extra fragments of
	40	# Makefile that will be used by this native
	41	# target.
	42	#
	43	# Notes:
	44	#
	45	# - To avoid shell expansion of variables, declare them with single
	46	# quotes.
	47	#
	48	# - nat_extra_makefile_frag should contain the full path of the file.
	49
	50
	51	case ${gdb_host_cpu} in
	52	aarch64)
	53	case ${gdb_host} in
	54	linux)
	55	# Host: AArch64 based machine running GNU/Linux
	56	NAT_FILE='config/nm-linux.h'
	57	NATDEPFILES='inf-ptrace.o fork-child.o aarch64-linux-nat.o aarch32-linux-nat.o \
	58	proc-service.o linux-thread-db.o linux-nat.o linux-fork.o \
	59	linux-procfs.o linux-ptrace.o linux-osdata.o linux-waitpid.o \
	60	linux-personality.o linux-namespaces.o aarch64-linux-hw-point.o \
	61	aarch64-linux.o'
	62	NAT_CDEPS='$(srcdir)/proc-service.list'
	63
	64	LOADLIBES='-ldl $(RDYNAMIC)'
65	;;
66	esac
67	;;
68	alpha)
69	case ${gdb_host} in
70	alpha-linux)
71	# Host: Little-endian Alpha running Linux
72	NAT_FILE='config/nm-linux.h'
73	NATDEPFILES='inf-ptrace.o alpha-linux-nat.o \
74	fork-child.o proc-service.o linux-thread-db.o \
75	linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
76	linux-waitpid.o linux-personality.o linux-namespaces.o'
77	NAT_CDEPS='$(srcdir)/proc-service.list'
78
79	# The dynamically loaded libthread_db needs access to symbols in the
80	# gdb executable.
81	LOADLIBES='-ldl $(RDYNAMIC)'
82
83	# doublest.c currently assumes some properties of FP arithmetic
84	# on the host which require this.
85	MH_CFLAGS='-mieee'
86	;;
87	nbsd)
88	# Host: NetBSD/alpha
89	NATDEPFILES='fork-child.o inf-ptrace.o alpha-bsd-nat.o bsd-kvm.o'
90
91	LOADLIBES='-lkvm'
92	;;
93	esac
94	;;
95	arm)
96	case ${gdb_host} in
97	linux)
98	# Host: ARM based machine running GNU/Linux
99	NAT_FILE='config/nm-linux.h'
100	NATDEPFILES='inf-ptrace.o fork-child.o arm-linux-nat.o \
101	aarch32-linux-nat.o proc-service.o linux-thread-db.o \
102	linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
103	linux-waitpid.o linux-personality.o linux-namespaces.o'
104	NAT_CDEPS='$(srcdir)/proc-service.list'
105
106	LOADLIBES='-ldl $(RDYNAMIC)'
107	;;
108	nbsdelf)
109	# Host: NetBSD/arm
110	NATDEPFILES='fork-child.o inf-ptrace.o arm-nbsd-nat.o'
111	;;
112	esac
113	;;
114	i386)
115	case ${gdb_host} in
116	cygwin64)
117	# Native config information for GDB on PowerPC systems running FreeBSD.
118	NATDEPFILES='x86-nat.o x86-dregs.o windows-nat.o amd64-windows-nat.o'
119	;;
120	cygwin)
121	MH_CFLAGS=
122	NATDEPFILES='x86-nat.o x86-dregs.o windows-nat.o i386-windows-nat.o'
123	XM_CLIBS=
124	;;
125	darwin)
126	# Host: IA86 running Darwin
127	NATDEPFILES='fork-child.o darwin-nat.o \
128	i386-darwin-nat.o x86-nat.o x86-dregs.o amd64-nat.o darwin-nat-info.o'
129	;;
130	fbsd64)
131	# Host: FreeBSD/amd64
132	NATDEPFILES='fork-child.o inf-ptrace.o \
133	fbsd-nat.o amd64-nat.o amd64-bsd-nat.o amd64-fbsd-nat.o \
134	bsd-kvm.o x86-nat.o x86-dregs.o x86-bsd-nat.o'
135	HAVE_NATIVE_GCORE_HOST=1
136
137	LOADLIBES='-lkvm'
138	;;
139	fbsd)
140	# Host: FreeBSD/i386
141	NATDEPFILES='fork-child.o inf-ptrace.o \
142	fbsd-nat.o x86-nat.o x86-dregs.o x86-bsd-nat.o i386-bsd-nat.o \
143	i386-fbsd-nat.o bsd-kvm.o'
144	NAT_FILE='nm-fbsd.h'
145	HAVE_NATIVE_GCORE_HOST=1
146
147	LOADLIBES='-lkvm'
148	;;
149	go32)
150	# Host: Intel x86 running DJGPP
151
152	# We include several header files from config/djgpp
153	MH_CFLAGS='-I$(srcdir)/config/djgpp'
154
155	NATDEPFILES='go32-nat.o x86-nat.o x86-dregs.o'
156
157	XM_CLIBS='-ldbg'
158	;;
159	i386gnu)
160	# Host: Intel 386 running the GNU Hurd
161	NATDEPFILES='i386-gnu-nat.o gnu-nat.o \
162	x86-nat.o x86-dregs.o fork-child.o \
163	notify_S.o process_reply_S.o msg_reply_S.o \
164	msg_U.o exc_request_U.o exc_request_S.o'
165	HAVE_NATIVE_GCORE_HOST=1
166
167	NAT_FILE='nm-i386gnu.h'
168	MH_CFLAGS='-D_GNU_SOURCE'
169
170	XM_CLIBS='-lshouldbeinlibc'
171
172	nat_extra_makefile_frag="${srcdir}/config/${gdb_host_cpu}/i386gnu.mn"
173	;;
174	i386sol2)
175	# Host: Solaris x86
176	NATDEPFILES='fork-child.o i386-v4-nat.o i386-sol2-nat.o \
177	procfs.o proc-api.o proc-events.o proc-flags.o proc-why.o'
178	HAVE_NATIVE_GCORE_HOST=1
179	;;
180	linux64)
181	# Host: GNU/Linux x86-64
182	NATDEPFILES='inf-ptrace.o fork-child.o \
183	x86-nat.o x86-dregs.o amd64-nat.o amd64-linux-nat.o \
184	x86-linux-nat.o \
185	linux-nat.o linux-osdata.o \
186	proc-service.o linux-thread-db.o linux-fork.o \
187	linux-procfs.o linux-ptrace.o linux-btrace.o \
188	linux-waitpid.o linux-personality.o x86-linux.o \
189	x86-linux-dregs.o amd64-linux-siginfo.o linux-namespaces.o'
190	NAT_FILE='config/nm-linux.h'
191	NAT_CDEPS='$(srcdir)/proc-service.list'
192
193	# The dynamically loaded libthread_db needs access to symbols in the
194	# gdb executable.
195	LOADLIBES='-ldl $(RDYNAMIC)'
196	;;
197	linux)
198	# Host: Intel 386 running GNU/Linux.
199	NAT_FILE='config/nm-linux.h'
200	NATDEPFILES='inf-ptrace.o fork-child.o \
201	x86-nat.o x86-dregs.o i386-linux-nat.o x86-linux-nat.o \
202	proc-service.o linux-thread-db.o \
203	linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
204	linux-btrace.o linux-waitpid.o linux-personality.o x86-linux.o \
205	x86-linux-dregs.o linux-namespaces.o'
206	NAT_CDEPS='$(srcdir)/proc-service.list'
207
208	# The dynamically loaded libthread_db needs access to symbols in the
209	# gdb executable.
210	LOADLIBES='-ldl $(RDYNAMIC)'
211	;;
212	mingw64)
213	NATDEPFILES='x86-nat.o x86-dregs.o windows-nat.o amd64-windows-nat.o'
214	;;
215	mingw)
216	MH_CFLAGS=
217	NATDEPFILES='x86-nat.o x86-dregs.o windows-nat.o i386-windows-nat.o'
218	XM_CLIBS=
219	;;
220	nbsd64)
221	# Host: NetBSD/amd64
222	NATDEPFILES='fork-child.o inf-ptrace.o \
223	nbsd-nat.o amd64-nat.o x86-bsd-nat.o amd64-bsd-nat.o amd64-nbsd-nat.o'
224	;;
225	nbsdelf)
226	# Host: NetBSD/i386 ELF
227	NATDEPFILES='fork-child.o inf-ptrace.o \
228	nbsd-nat.o x86-bsd-nat.o i386-bsd-nat.o i386-nbsd-nat.o bsd-kvm.o'
229
230	LOADLIBES='-lkvm'
231	;;
232	nto)
233	# Host: Intel 386 running QNX.
234	NATDEPFILES='nto-procfs.o'
235	NAT_FILE='config/nm-nto.h'
236	;;
237	obsd64)
238	# Host: OpenBSD/amd64
239	NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o \
240	amd64-nat.o x86-bsd-nat.o amd64-bsd-nat.o amd64-obsd-nat.o bsd-kvm.o'
241
242	LOADLIBES='-lkvm'
243	;;
244	obsd)
245	# Host: OpenBSD/i386 ELF
246	NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o \
247	x86-bsd-nat.o i386-bsd-nat.o i386-obsd-nat.o bsd-kvm.o'
248
249	LOADLIBES='-lkvm'
250	;;
251	sol2-64)
252	# Host: Solaris x86_64
253	NATDEPFILES='fork-child.o amd64-nat.o i386-v4-nat.o i386-sol2-nat.o \
254	procfs.o proc-api.o proc-events.o proc-flags.o proc-why.o'
255	HAVE_NATIVE_GCORE_HOST=1
256	;;
257	esac
258	;;
259	ia64)
260	case ${gdb_host} in
261	linux)
262	# Host: Intel IA-64 running GNU/Linux
263	NAT_FILE='config/nm-linux.h'
264	NATDEPFILES='inf-ptrace.o fork-child.o \
265	ia64-linux-nat.o \
266	proc-service.o linux-thread-db.o \
267	linux-nat.o linux-osdata.o linux-fork.o \
268	linux-personality.o \
269	linux-procfs.o linux-ptrace.o linux-waitpid.o \
270	linux-namespaces.o'
271	NAT_CDEPS='$(srcdir)/proc-service.list'
272
273	LOADLIBES='-ldl $(RDYNAMIC)'
274	;;
275	esac
276	;;
277	m32r)
278	case ${gdb_host} in
279	linux)
280	# Host: M32R based machine running GNU/Linux
281	NAT_FILE='config/nm-linux.h'
282	NATDEPFILES='inf-ptrace.o fork-child.o \
283	m32r-linux-nat.o proc-service.o linux-thread-db.o \
284	linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
285	linux-waitpid.o linux-personality.o linux-namespaces.o'
286	NAT_CDEPS='$(srcdir)/proc-service.list'
287
288	LOADLIBES='-ldl $(RDYNAMIC)'
289	;;
290	esac
291	;;
292	m68k)
293	case ${gdb_host} in
294	linux)
295	# Host: Motorola m68k running GNU/Linux.
296	NAT_FILE='config/nm-linux.h'
297	NATDEPFILES='inf-ptrace.o fork-child.o \
298	m68k-linux-nat.o \
299	proc-service.o linux-thread-db.o \
300	linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
301	linux-personality.o \
302	linux-waitpid.o linux-namespaces.o'
303	NAT_CDEPS='$(srcdir)/proc-service.list'
304
305	# The dynamically loaded libthread_db needs access to symbols in the
306	# gdb executable.
307	LOADLIBES='-ldl $(RDYNAMIC)'
308	;;
309	nbsdelf)
310	# Host: NetBSD/m68k ELF
311	NATDEPFILES='m68k-bsd-nat.o bsd-kvm.o fork-child.o inf-ptrace.o'
312
313	LOADLIBES='-lkvm'
314	;;
315	obsd)
316	# Host: OpenBSD/m68k
317	NATDEPFILES='m68k-bsd-nat.o bsd-kvm.o fork-child.o inf-ptrace.o'
318
319	LOADLIBES='-lkvm'
320	;;
321	esac
322	;;
323	m88k)
324	case ${gdb_host} in
325	obsd)
326	# Host: OpenBSD/m88k
327	NATDEPFILES='fork-child.o inf-ptrace.o m88k-bsd-nat.o'
328	;;
329	esac
330	;;
331	mips)
332	case ${gdb_host} in
333	fbsd)
334	# Host: FreeBSD/mips
335	NATDEPFILES='fork-child.o inf-ptrace.o fbsd-nat.o mips-fbsd-nat.o'
336	HAVE_NATIVE_GCORE_HOST=1
337	;;
338	linux)
339	# Host: Linux/MIPS
340	NAT_FILE='config/nm-linux.h'
341	NATDEPFILES='inf-ptrace.o fork-child.o mips-linux-nat.o \
342	linux-thread-db.o proc-service.o \
343	linux-nat.o linux-osdata.o linux-fork.o \
344	linux-procfs.o linux-ptrace.o linux-waitpid.o \
345	linux-personality.o \
346	mips-linux-watch.o linux-namespaces.o'
347	NAT_CDEPS='$(srcdir)/proc-service.list'
348
349	LOADLIBES='-ldl $(RDYNAMIC)'
350	;;
351	nbsd)
352	# Host: NetBSD/mips
353	NATDEPFILES='fork-child.o inf-ptrace.o mips-nbsd-nat.o'
354	;;
355	obsd64)
356	# Host: OpenBSD/mips64
357	NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o mips64-obsd-nat.o'
358	;;
359	esac
360	;;
361	pa)
362	case ${gdb_host} in
363	linux)
364	# Host: Hewlett-Packard PA-RISC machine, running Linux
365	NAT_FILE='config/nm-linux.h'
366	NATDEPFILES='inf-ptrace.o fork-child.o \
367	hppa-linux-nat.o proc-service.o linux-thread-db.o \
368	linux-nat.o linux-osdata.o linux-fork.o \
369	linux-procfs.o linux-ptrace.o linux-waitpid.o \
370	linux-personality.o linux-namespaces.o'
371	NAT_CDEPS='$(srcdir)/proc-service.list'
372
373	LOADLIBES='-ldl $(RDYNAMIC)'
374	;;
375	nbsd)
376	# Host: NetBSD/hppa
377	NATDEPFILES='fork-child.o inf-ptrace.o nbsd-nat.o hppa-nbsd-nat.o'
378	;;
379	obsd)
380	# Host: OpenBSD/hppa
381	NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o hppa-obsd-nat.o'
382	;;
383	esac
384	;;
385	powerpc)
386	case ${gdb_host} in
387	aix)
388	# Host: IBM PowerPC running AIX
389	# aix-thread.o is not listed in NATDEPFILES as it is pulled in by configure.
390	NATDEPFILES='fork-child.o inf-ptrace.o rs6000-nat.o'
391
392	# When compiled with cc, for debugging, this argument should be passed.
393	# We have no idea who our current compiler is though, so we skip it.
394	# MH_CFLAGS='-bnodelcsect'
395	;;
396	fbsd)
397	# Native config information for GDB on PowerPC systems running FreeBSD.
398	NATDEPFILES='fbsd-nat.o fork-child.o inf-ptrace.o ppc-fbsd-nat.o bsd-kvm.o'
399	HAVE_NATIVE_GCORE_HOST=1
400
401	LOADLIBES='-lkvm'
402	;;
403	linux)
404	# Host: PowerPC, running Linux
405	XM_CLIBS=
406
407	NAT_FILE='config/nm-linux.h'
408	NATDEPFILES='inf-ptrace.o fork-child.o \
409	ppc-linux-nat.o proc-service.o linux-thread-db.o \
410	linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
411	linux-waitpid.o linux-personality.o linux-namespaces.o'
412	NAT_CDEPS='$(srcdir)/proc-service.list'
413
414	LOADLIBES='-ldl $(RDYNAMIC)'
415	;;
416	nbsd)
417	# Host: NetBSD/powerpc
418	NATDEPFILES='fork-child.o inf-ptrace.o ppc-nbsd-nat.o bsd-kvm.o'
419
420	LOADLIBES='-lkvm'
421	;;
422	obsd)
423	# Host: OpenBSD/powerpc
424	NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o ppc-obsd-nat.o bsd-kvm.o'
425
426	LOADLIBES='-lkvm'
427	;;
428	ppc64-linux)
429	# Host: PowerPC64, running Linux
430	XM_CLIBS=
431
432	NAT_FILE='config/nm-linux.h'
433	NATDEPFILES='inf-ptrace.o fork-child.o \
434	ppc-linux-nat.o proc-service.o linux-thread-db.o \
435	linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
436	linux-waitpid.o ppc-linux.o linux-personality.o \
437	linux-namespaces.o'
438	NAT_CDEPS='$(srcdir)/proc-service.list'
439
440	# The dynamically loaded libthread_db needs access to symbols in the
441	# gdb executable.
442	LOADLIBES='-ldl $(RDYNAMIC)'
443	;;
444	spu-linux)
445	# Target: Cell BE (PowerPC64 + SPU)
446	# This implements a 'pseudo-native' GDB running on the
447	# PPU side of the Cell BE and debugging the SPU side.
448
449	NATDEPFILES='spu-linux-nat.o fork-child.o inf-ptrace.o \
450	linux-procfs.o linux-ptrace.o linux-waitpid.o \
451	linux-personality.o linux-namespaces.o'
452	;;
453	esac
454	;;
455	s390)
456	case ${gdb_host} in
457	linux)
458	# Host: S390, running Linux
459	NAT_FILE='config/nm-linux.h'
460	NATDEPFILES='inf-ptrace.o fork-child.o s390-linux-nat.o \
461	linux-thread-db.o proc-service.o \
462	linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
463	linux-personality.o \
464	linux-waitpid.o linux-namespaces.o'
465	NAT_CDEPS='$(srcdir)/proc-service.list'
466	LOADLIBES='-ldl $(RDYNAMIC)'
467	;;
468	esac
469	;;
470	sh)
471	case ${gdb_host} in
472	nbsd)
473	# Host: NetBSD/sh
474	NATDEPFILES='fork-child.o inf-ptrace.o sh-nbsd-nat.o'
475	;;
476	esac
477	;;
478	sparc)
479	case ${gdb_host} in
480	fbsd)
481	# Host: FreeBSD/sparc64
482	NATDEPFILES='fork-child.o inf-ptrace.o \
483	fbsd-nat.o sparc-nat.o sparc64-nat.o sparc64-fbsd-nat.o \
484	bsd-kvm.o'
485	HAVE_NATIVE_GCORE_HOST=1
486
487	LOADLIBES='-lkvm'
488	;;
489	linux64)
490	# Host: GNU/Linux UltraSPARC
491	NAT_FILE='config/nm-linux.h'
492	NATDEPFILES='sparc-nat.o sparc64-nat.o sparc64-linux-nat.o \
493	fork-child.o inf-ptrace.o \
494	proc-service.o linux-thread-db.o \
495	linux-nat.o linux-osdata.o linux-fork.o \
496	linux-procfs.o linux-ptrace.o linux-waitpid.o \
497	linux-personality.o linux-namespaces.o'
498	NAT_CDEPS='$(srcdir)/proc-service.list'
499
500	# The dynamically loaded libthread_db needs access to symbols in the
501	# gdb executable.
502	LOADLIBES='-ldl $(RDYNAMIC)'
503	;;
504	linux)
505	# Host: GNU/Linux SPARC
506	NAT_FILE='config/nm-linux.h'
507	NATDEPFILES='sparc-nat.o sparc-linux-nat.o \
508	fork-child.o inf-ptrace.o \
509	proc-service.o linux-thread-db.o \
510	linux-nat.o linux-osdata.o linux-fork.o \
511	linux-procfs.o linux-ptrace.o linux-waitpid.o \
512	linux-personality.o linux-namespaces.o'
513	NAT_CDEPS='$(srcdir)/proc-service.list'
514
515	# The dynamically loaded libthread_db needs access to symbols in the
516	# gdb executable.
517	LOADLIBES='-ldl $(RDYNAMIC)'
518	;;
519	nbsd64)
520	# Host: NetBSD/sparc64
521	NATDEPFILES='fork-child.o inf-ptrace.o \
522	sparc64-nbsd-nat.o sparc-nat.o bsd-kvm.o'
523
524	LOADLIBES='-lkvm'
525	;;
526	nbsdelf)
527	# Host: NetBSD/sparc ELF
528	NATDEPFILES='fork-child.o inf-ptrace.o \
529	sparc-nat.o sparc-nbsd-nat.o bsd-kvm.o'
530
531	LOADLIBES='-lkvm'
532	;;
533	obsd64)
534	# Host: OpenBSD/sparc64
535	NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o \
536	sparc64-obsd-nat.o sparc-nat.o bsd-kvm.o'
537
538	LOADLIBES='-lkvm'
539	;;
540	sol2)
541	# Host: Solaris SPARC & UltraSPARC
542	NAT_FILE='nm-sol2.h'
543	NATDEPFILES='sparc-sol2-nat.o \
544	fork-child.o \
545	procfs.o proc-api.o proc-events.o proc-flags.o proc-why.o'
546	HAVE_NATIVE_GCORE_HOST=1
547	;;
548	esac
549	;;
550	tilegx)
551	case ${gdb_host} in
552	linux)
553	# Host: Tilera TILE-Gx running GNU/Linux.
554	NAT_FILE='config/nm-linux.h'
555	NATDEPFILES='inf-ptrace.o fork-child.o \
556	tilegx-linux-nat.o \
557	proc-service.o linux-thread-db.o \
558	linux-nat.o linux-osdata.o linux-fork.o \
559	linux-procfs.o linux-ptrace.o linux-waitpid.o \
560	linux-personality.o linux-namespaces.o'
561
562	# The dynamically loaded libthread_db needs access to symbols in the
563	# gdb executable.
564	LOADLIBES='-ldl $(RDYNAMIC)'
565	;;
566	esac
567	;;
568	vax)
569	case ${gdb_host} in
570	nbsdelf)
571	# Host: NetBSD/vax ELF
572	NATDEPFILES='fork-child.o inf-ptrace.o \
573	vax-bsd-nat.o bsd-kvm.o'
574
575	LOADLIBES='-lkvm'
576	;;
577	obsd)
578	# Host: OpenBSD/vax
579	NATDEPFILES='fork-child.o inf-ptrace.o \
580	vax-bsd-nat.o bsd-kvm.o'
581
582	LOADLIBES='-lkvm'
583	;;
584	esac
585	;;
586	xtensa)
587	case ${gdb_host} in
588	linux)
589	# Host: Xtensa, running GNU/Linux.
590	NAT_FILE='config/nm-linux.h'
591
592	NATDEPFILES='inf-ptrace.o fork-child.o xtensa-linux-nat.o \
593	linux-thread-db.o proc-service.o \
594	linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
595	linux-waitpid.o linux-personality.o linux-namespaces.o'
596	NAT_CDEPS='$(srcdir)/proc-service.list'
597
598	LOADLIBES='-ldl $(RDYNAMIC)'
599	;;
600	esac
601	;;
602	esac