Commit | Line | Data |
---|---|---|
c906108c | 1 | /* Target-struct-independent code to start (run) and stop an inferior process. |
7a292a7a | 2 | Copyright 1986-1989, 1991-1999 Free Software Foundation, Inc. |
c906108c | 3 | |
c5aa993b | 4 | This file is part of GDB. |
c906108c | 5 | |
c5aa993b JM |
6 | This program is free software; you can redistribute it and/or modify |
7 | it under the terms of the GNU General Public License as published by | |
8 | the Free Software Foundation; either version 2 of the License, or | |
9 | (at your option) any later version. | |
c906108c | 10 | |
c5aa993b JM |
11 | This program is distributed in the hope that it will be useful, |
12 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | GNU General Public License for more details. | |
c906108c | 15 | |
c5aa993b JM |
16 | You should have received a copy of the GNU General Public License |
17 | along with this program; if not, write to the Free Software | |
18 | Foundation, Inc., 59 Temple Place - Suite 330, | |
19 | Boston, MA 02111-1307, USA. */ | |
c906108c SS |
20 | |
21 | #include "defs.h" | |
22 | #include "gdb_string.h" | |
23 | #include <ctype.h> | |
24 | #include "symtab.h" | |
25 | #include "frame.h" | |
26 | #include "inferior.h" | |
27 | #include "breakpoint.h" | |
28 | #include "wait.h" | |
29 | #include "gdbcore.h" | |
30 | #include "gdbcmd.h" | |
31 | #include "target.h" | |
32 | #include "gdbthread.h" | |
33 | #include "annotate.h" | |
34 | #include "symfile.h" /* for overlay functions */ | |
7a292a7a | 35 | #include "top.h" |
c906108c | 36 | #include <signal.h> |
43ff13b4 | 37 | #include "event-loop.h" |
c906108c SS |
38 | |
39 | /* Prototypes for local functions */ | |
40 | ||
96baa820 | 41 | static void signals_info (char *, int); |
c906108c | 42 | |
96baa820 | 43 | static void handle_command (char *, int); |
c906108c | 44 | |
96baa820 | 45 | static void sig_print_info (enum target_signal); |
c906108c | 46 | |
96baa820 | 47 | static void sig_print_header (void); |
c906108c | 48 | |
96baa820 | 49 | static void resume_cleanups (int); |
c906108c | 50 | |
96baa820 | 51 | static int hook_stop_stub (void *); |
c906108c | 52 | |
96baa820 | 53 | static void delete_breakpoint_current_contents (void *); |
c906108c | 54 | |
96baa820 JM |
55 | static void set_follow_fork_mode_command (char *arg, int from_tty, |
56 | struct cmd_list_element * c); | |
7a292a7a | 57 | |
96baa820 JM |
58 | static void complete_execution (void); |
59 | ||
60 | static struct inferior_status *xmalloc_inferior_status (void); | |
61 | ||
62 | static void free_inferior_status (struct inferior_status *); | |
63 | ||
64 | static int restore_selected_frame (void *); | |
65 | ||
66 | static void build_infrun (void); | |
67 | ||
68 | static void follow_inferior_fork (int parent_pid, int child_pid, | |
69 | int has_forked, int has_vforked); | |
70 | ||
71 | static void follow_fork (int parent_pid, int child_pid); | |
72 | ||
73 | static void follow_vfork (int parent_pid, int child_pid); | |
74 | ||
75 | static void set_schedlock_func (char *args, int from_tty, | |
76 | struct cmd_list_element * c); | |
77 | ||
78 | static int is_internal_shlib_eventpoint (struct breakpoint * ep); | |
79 | ||
80 | static int stopped_for_internal_shlib_event (bpstat bs); | |
81 | ||
82 | struct execution_control_state; | |
83 | ||
84 | static int currently_stepping (struct execution_control_state *ecs); | |
85 | ||
86 | static void xdb_handle_command (char *args, int from_tty); | |
87 | ||
88 | void _initialize_infrun (void); | |
43ff13b4 | 89 | |
c906108c SS |
90 | int inferior_ignoring_startup_exec_events = 0; |
91 | int inferior_ignoring_leading_exec_events = 0; | |
92 | ||
43ff13b4 | 93 | /* In asynchronous mode, but simulating synchronous execution. */ |
96baa820 | 94 | |
43ff13b4 JM |
95 | int sync_execution = 0; |
96 | ||
c906108c SS |
97 | /* wait_for_inferior and normal_stop use this to notify the user |
98 | when the inferior stopped in a different thread than it had been | |
96baa820 JM |
99 | running in. */ |
100 | ||
c906108c | 101 | static int switched_from_inferior_pid; |
7a292a7a SS |
102 | |
103 | /* This will be true for configurations that may actually report an | |
104 | inferior pid different from the original. At present this is only | |
105 | true for HP-UX native. */ | |
106 | ||
107 | #ifndef MAY_SWITCH_FROM_INFERIOR_PID | |
108 | #define MAY_SWITCH_FROM_INFERIOR_PID (0) | |
109 | #endif | |
110 | ||
111 | static int may_switch_from_inferior_pid = MAY_SWITCH_FROM_INFERIOR_PID; | |
112 | ||
113 | /* This is true for configurations that may follow through execl() and | |
114 | similar functions. At present this is only true for HP-UX native. */ | |
115 | ||
116 | #ifndef MAY_FOLLOW_EXEC | |
117 | #define MAY_FOLLOW_EXEC (0) | |
c906108c SS |
118 | #endif |
119 | ||
7a292a7a SS |
120 | static int may_follow_exec = MAY_FOLLOW_EXEC; |
121 | ||
c906108c SS |
122 | /* resume and wait_for_inferior use this to ensure that when |
123 | stepping over a hit breakpoint in a threaded application | |
124 | only the thread that hit the breakpoint is stepped and the | |
125 | other threads don't continue. This prevents having another | |
126 | thread run past the breakpoint while it is temporarily | |
127 | removed. | |
128 | ||
129 | This is not thread-specific, so it isn't saved as part of | |
130 | the infrun state. | |
131 | ||
132 | Versions of gdb which don't use the "step == this thread steps | |
133 | and others continue" model but instead use the "step == this | |
96baa820 JM |
134 | thread steps and others wait" shouldn't do this. */ |
135 | ||
c906108c SS |
136 | static int thread_step_needed = 0; |
137 | ||
7a292a7a SS |
138 | /* This is true if thread_step_needed should actually be used. At |
139 | present this is only true for HP-UX native. */ | |
140 | ||
141 | #ifndef USE_THREAD_STEP_NEEDED | |
142 | #define USE_THREAD_STEP_NEEDED (0) | |
143 | #endif | |
144 | ||
145 | static int use_thread_step_needed = USE_THREAD_STEP_NEEDED; | |
146 | ||
c906108c SS |
147 | /* GET_LONGJMP_TARGET returns the PC at which longjmp() will resume the |
148 | program. It needs to examine the jmp_buf argument and extract the PC | |
149 | from it. The return value is non-zero on success, zero otherwise. */ | |
150 | ||
151 | #ifndef GET_LONGJMP_TARGET | |
152 | #define GET_LONGJMP_TARGET(PC_ADDR) 0 | |
153 | #endif | |
154 | ||
155 | ||
156 | /* Some machines have trampoline code that sits between function callers | |
157 | and the actual functions themselves. If this machine doesn't have | |
158 | such things, disable their processing. */ | |
159 | ||
160 | #ifndef SKIP_TRAMPOLINE_CODE | |
161 | #define SKIP_TRAMPOLINE_CODE(pc) 0 | |
162 | #endif | |
163 | ||
164 | /* Dynamic function trampolines are similar to solib trampolines in that they | |
165 | are between the caller and the callee. The difference is that when you | |
166 | enter a dynamic trampoline, you can't determine the callee's address. Some | |
167 | (usually complex) code needs to run in the dynamic trampoline to figure out | |
168 | the callee's address. This macro is usually called twice. First, when we | |
169 | enter the trampoline (looks like a normal function call at that point). It | |
170 | should return the PC of a point within the trampoline where the callee's | |
171 | address is known. Second, when we hit the breakpoint, this routine returns | |
172 | the callee's address. At that point, things proceed as per a step resume | |
173 | breakpoint. */ | |
174 | ||
175 | #ifndef DYNAMIC_TRAMPOLINE_NEXTPC | |
176 | #define DYNAMIC_TRAMPOLINE_NEXTPC(pc) 0 | |
177 | #endif | |
178 | ||
179 | /* On SVR4 based systems, determining the callee's address is exceedingly | |
180 | difficult and depends on the implementation of the run time loader. | |
181 | If we are stepping at the source level, we single step until we exit | |
182 | the run time loader code and reach the callee's address. */ | |
183 | ||
184 | #ifndef IN_SOLIB_DYNSYM_RESOLVE_CODE | |
185 | #define IN_SOLIB_DYNSYM_RESOLVE_CODE(pc) 0 | |
186 | #endif | |
187 | ||
188 | /* For SVR4 shared libraries, each call goes through a small piece of | |
189 | trampoline code in the ".plt" section. IN_SOLIB_CALL_TRAMPOLINE evaluates | |
190 | to nonzero if we are current stopped in one of these. */ | |
191 | ||
192 | #ifndef IN_SOLIB_CALL_TRAMPOLINE | |
193 | #define IN_SOLIB_CALL_TRAMPOLINE(pc,name) 0 | |
194 | #endif | |
195 | ||
196 | /* In some shared library schemes, the return path from a shared library | |
197 | call may need to go through a trampoline too. */ | |
198 | ||
199 | #ifndef IN_SOLIB_RETURN_TRAMPOLINE | |
200 | #define IN_SOLIB_RETURN_TRAMPOLINE(pc,name) 0 | |
201 | #endif | |
202 | ||
203 | /* This function returns TRUE if pc is the address of an instruction | |
204 | that lies within the dynamic linker (such as the event hook, or the | |
205 | dld itself). | |
206 | ||
207 | This function must be used only when a dynamic linker event has | |
208 | been caught, and the inferior is being stepped out of the hook, or | |
209 | undefined results are guaranteed. */ | |
210 | ||
211 | #ifndef SOLIB_IN_DYNAMIC_LINKER | |
212 | #define SOLIB_IN_DYNAMIC_LINKER(pid,pc) 0 | |
213 | #endif | |
214 | ||
215 | /* On MIPS16, a function that returns a floating point value may call | |
216 | a library helper function to copy the return value to a floating point | |
217 | register. The IGNORE_HELPER_CALL macro returns non-zero if we | |
218 | should ignore (i.e. step over) this function call. */ | |
219 | #ifndef IGNORE_HELPER_CALL | |
220 | #define IGNORE_HELPER_CALL(pc) 0 | |
221 | #endif | |
222 | ||
223 | /* On some systems, the PC may be left pointing at an instruction that won't | |
224 | actually be executed. This is usually indicated by a bit in the PSW. If | |
225 | we find ourselves in such a state, then we step the target beyond the | |
226 | nullified instruction before returning control to the user so as to avoid | |
227 | confusion. */ | |
228 | ||
229 | #ifndef INSTRUCTION_NULLIFIED | |
230 | #define INSTRUCTION_NULLIFIED 0 | |
231 | #endif | |
232 | ||
7a292a7a SS |
233 | /* Convert the #defines into values. This is temporary until wfi control |
234 | flow is completely sorted out. */ | |
235 | ||
236 | #ifndef HAVE_STEPPABLE_WATCHPOINT | |
237 | #define HAVE_STEPPABLE_WATCHPOINT 0 | |
238 | #else | |
239 | #undef HAVE_STEPPABLE_WATCHPOINT | |
240 | #define HAVE_STEPPABLE_WATCHPOINT 1 | |
241 | #endif | |
242 | ||
243 | #ifndef HAVE_NONSTEPPABLE_WATCHPOINT | |
244 | #define HAVE_NONSTEPPABLE_WATCHPOINT 0 | |
245 | #else | |
246 | #undef HAVE_NONSTEPPABLE_WATCHPOINT | |
247 | #define HAVE_NONSTEPPABLE_WATCHPOINT 1 | |
248 | #endif | |
249 | ||
250 | #ifndef HAVE_CONTINUABLE_WATCHPOINT | |
251 | #define HAVE_CONTINUABLE_WATCHPOINT 0 | |
252 | #else | |
253 | #undef HAVE_CONTINUABLE_WATCHPOINT | |
254 | #define HAVE_CONTINUABLE_WATCHPOINT 1 | |
255 | #endif | |
256 | ||
c906108c SS |
257 | /* Tables of how to react to signals; the user sets them. */ |
258 | ||
259 | static unsigned char *signal_stop; | |
260 | static unsigned char *signal_print; | |
261 | static unsigned char *signal_program; | |
262 | ||
263 | #define SET_SIGS(nsigs,sigs,flags) \ | |
264 | do { \ | |
265 | int signum = (nsigs); \ | |
266 | while (signum-- > 0) \ | |
267 | if ((sigs)[signum]) \ | |
268 | (flags)[signum] = 1; \ | |
269 | } while (0) | |
270 | ||
271 | #define UNSET_SIGS(nsigs,sigs,flags) \ | |
272 | do { \ | |
273 | int signum = (nsigs); \ | |
274 | while (signum-- > 0) \ | |
275 | if ((sigs)[signum]) \ | |
276 | (flags)[signum] = 0; \ | |
277 | } while (0) | |
278 | ||
279 | ||
280 | /* Command list pointer for the "stop" placeholder. */ | |
281 | ||
282 | static struct cmd_list_element *stop_command; | |
283 | ||
284 | /* Nonzero if breakpoints are now inserted in the inferior. */ | |
285 | ||
286 | static int breakpoints_inserted; | |
287 | ||
288 | /* Function inferior was in as of last step command. */ | |
289 | ||
290 | static struct symbol *step_start_function; | |
291 | ||
292 | /* Nonzero if we are expecting a trace trap and should proceed from it. */ | |
293 | ||
294 | static int trap_expected; | |
295 | ||
296 | #ifdef SOLIB_ADD | |
297 | /* Nonzero if we want to give control to the user when we're notified | |
298 | of shared library events by the dynamic linker. */ | |
299 | static int stop_on_solib_events; | |
300 | #endif | |
301 | ||
302 | #ifdef HP_OS_BUG | |
303 | /* Nonzero if the next time we try to continue the inferior, it will | |
304 | step one instruction and generate a spurious trace trap. | |
305 | This is used to compensate for a bug in HP-UX. */ | |
306 | ||
307 | static int trap_expected_after_continue; | |
308 | #endif | |
309 | ||
310 | /* Nonzero means expecting a trace trap | |
311 | and should stop the inferior and return silently when it happens. */ | |
312 | ||
313 | int stop_after_trap; | |
314 | ||
315 | /* Nonzero means expecting a trap and caller will handle it themselves. | |
316 | It is used after attach, due to attaching to a process; | |
317 | when running in the shell before the child program has been exec'd; | |
318 | and when running some kinds of remote stuff (FIXME?). */ | |
319 | ||
320 | int stop_soon_quietly; | |
321 | ||
322 | /* Nonzero if proceed is being used for a "finish" command or a similar | |
323 | situation when stop_registers should be saved. */ | |
324 | ||
325 | int proceed_to_finish; | |
326 | ||
327 | /* Save register contents here when about to pop a stack dummy frame, | |
328 | if-and-only-if proceed_to_finish is set. | |
329 | Thus this contains the return value from the called function (assuming | |
330 | values are returned in a register). */ | |
331 | ||
7a292a7a | 332 | char *stop_registers; |
c906108c SS |
333 | |
334 | /* Nonzero if program stopped due to error trying to insert breakpoints. */ | |
335 | ||
336 | static int breakpoints_failed; | |
337 | ||
338 | /* Nonzero after stop if current stack frame should be printed. */ | |
339 | ||
340 | static int stop_print_frame; | |
341 | ||
342 | static struct breakpoint *step_resume_breakpoint = NULL; | |
343 | static struct breakpoint *through_sigtramp_breakpoint = NULL; | |
344 | ||
345 | /* On some platforms (e.g., HP-UX), hardware watchpoints have bad | |
346 | interactions with an inferior that is running a kernel function | |
347 | (aka, a system call or "syscall"). wait_for_inferior therefore | |
348 | may have a need to know when the inferior is in a syscall. This | |
349 | is a count of the number of inferior threads which are known to | |
350 | currently be running in a syscall. */ | |
351 | static int number_of_threads_in_syscalls; | |
352 | ||
353 | /* This is used to remember when a fork, vfork or exec event | |
354 | was caught by a catchpoint, and thus the event is to be | |
355 | followed at the next resume of the inferior, and not | |
356 | immediately. */ | |
357 | static struct | |
358 | { | |
359 | enum target_waitkind kind; | |
360 | struct | |
361 | { | |
362 | int parent_pid; | |
363 | int saw_parent_fork; | |
364 | int child_pid; | |
365 | int saw_child_fork; | |
366 | int saw_child_exec; | |
367 | } | |
368 | fork_event; | |
369 | char *execd_pathname; | |
370 | } | |
371 | pending_follow; | |
372 | ||
373 | /* Some platforms don't allow us to do anything meaningful with a | |
374 | vforked child until it has exec'd. Vforked processes on such | |
375 | platforms can only be followed after they've exec'd. | |
376 | ||
377 | When this is set to 0, a vfork can be immediately followed, | |
378 | and an exec can be followed merely as an exec. When this is | |
379 | set to 1, a vfork event has been seen, but cannot be followed | |
380 | until the exec is seen. | |
381 | ||
382 | (In the latter case, inferior_pid is still the parent of the | |
383 | vfork, and pending_follow.fork_event.child_pid is the child. The | |
384 | appropriate process is followed, according to the setting of | |
385 | follow-fork-mode.) */ | |
386 | static int follow_vfork_when_exec; | |
387 | ||
388 | static char *follow_fork_mode_kind_names[] = | |
389 | { | |
390 | /* ??rehrauer: The "both" option is broken, by what may be a 10.20 | |
391 | kernel problem. It's also not terribly useful without a GUI to | |
392 | help the user drive two debuggers. So for now, I'm disabling | |
393 | the "both" option. | |
c5aa993b JM |
394 | "parent", "child", "both", "ask" }; |
395 | */ | |
c906108c SS |
396 | "parent", "child", "ask"}; |
397 | ||
398 | static char *follow_fork_mode_string = NULL; | |
399 | \f | |
400 | ||
c906108c | 401 | static void |
96baa820 JM |
402 | follow_inferior_fork (int parent_pid, int child_pid, int has_forked, |
403 | int has_vforked) | |
c906108c SS |
404 | { |
405 | int followed_parent = 0; | |
406 | int followed_child = 0; | |
c906108c SS |
407 | |
408 | /* Which process did the user want us to follow? */ | |
409 | char *follow_mode = | |
96baa820 | 410 | savestring (follow_fork_mode_string, strlen (follow_fork_mode_string)); |
c906108c SS |
411 | |
412 | /* Or, did the user not know, and want us to ask? */ | |
413 | if (STREQ (follow_fork_mode_string, "ask")) | |
414 | { | |
415 | char requested_mode[100]; | |
416 | ||
417 | free (follow_mode); | |
418 | error ("\"ask\" mode NYI"); | |
419 | follow_mode = savestring (requested_mode, strlen (requested_mode)); | |
420 | } | |
421 | ||
422 | /* If we're to be following the parent, then detach from child_pid. | |
423 | We're already following the parent, so need do nothing explicit | |
424 | for it. */ | |
425 | if (STREQ (follow_mode, "parent")) | |
426 | { | |
427 | followed_parent = 1; | |
428 | ||
429 | /* We're already attached to the parent, by default. */ | |
430 | ||
431 | /* Before detaching from the child, remove all breakpoints from | |
432 | it. (This won't actually modify the breakpoint list, but will | |
433 | physically remove the breakpoints from the child.) */ | |
434 | if (!has_vforked || !follow_vfork_when_exec) | |
435 | { | |
436 | detach_breakpoints (child_pid); | |
7a292a7a | 437 | #ifdef SOLIB_REMOVE_INFERIOR_HOOK |
c906108c | 438 | SOLIB_REMOVE_INFERIOR_HOOK (child_pid); |
7a292a7a | 439 | #endif |
c906108c SS |
440 | } |
441 | ||
442 | /* Detach from the child. */ | |
443 | dont_repeat (); | |
444 | ||
445 | target_require_detach (child_pid, "", 1); | |
446 | } | |
447 | ||
448 | /* If we're to be following the child, then attach to it, detach | |
449 | from inferior_pid, and set inferior_pid to child_pid. */ | |
450 | else if (STREQ (follow_mode, "child")) | |
451 | { | |
452 | char child_pid_spelling[100]; /* Arbitrary length. */ | |
453 | ||
454 | followed_child = 1; | |
455 | ||
456 | /* Before detaching from the parent, detach all breakpoints from | |
457 | the child. But only if we're forking, or if we follow vforks | |
458 | as soon as they happen. (If we're following vforks only when | |
459 | the child has exec'd, then it's very wrong to try to write | |
460 | back the "shadow contents" of inserted breakpoints now -- they | |
461 | belong to the child's pre-exec'd a.out.) */ | |
462 | if (!has_vforked || !follow_vfork_when_exec) | |
463 | { | |
464 | detach_breakpoints (child_pid); | |
465 | } | |
466 | ||
467 | /* Before detaching from the parent, remove all breakpoints from it. */ | |
468 | remove_breakpoints (); | |
469 | ||
470 | /* Also reset the solib inferior hook from the parent. */ | |
7a292a7a | 471 | #ifdef SOLIB_REMOVE_INFERIOR_HOOK |
c906108c | 472 | SOLIB_REMOVE_INFERIOR_HOOK (inferior_pid); |
7a292a7a | 473 | #endif |
c906108c SS |
474 | |
475 | /* Detach from the parent. */ | |
476 | dont_repeat (); | |
477 | target_detach (NULL, 1); | |
478 | ||
479 | /* Attach to the child. */ | |
480 | inferior_pid = child_pid; | |
481 | sprintf (child_pid_spelling, "%d", child_pid); | |
482 | dont_repeat (); | |
483 | ||
484 | target_require_attach (child_pid_spelling, 1); | |
485 | ||
486 | /* Was there a step_resume breakpoint? (There was if the user | |
487 | did a "next" at the fork() call.) If so, explicitly reset its | |
488 | thread number. | |
489 | ||
490 | step_resumes are a form of bp that are made to be per-thread. | |
491 | Since we created the step_resume bp when the parent process | |
492 | was being debugged, and now are switching to the child process, | |
493 | from the breakpoint package's viewpoint, that's a switch of | |
494 | "threads". We must update the bp's notion of which thread | |
495 | it is for, or it'll be ignored when it triggers... */ | |
496 | if (step_resume_breakpoint && | |
497 | (!has_vforked || !follow_vfork_when_exec)) | |
498 | breakpoint_re_set_thread (step_resume_breakpoint); | |
499 | ||
500 | /* Reinsert all breakpoints in the child. (The user may've set | |
501 | breakpoints after catching the fork, in which case those | |
502 | actually didn't get set in the child, but only in the parent.) */ | |
503 | if (!has_vforked || !follow_vfork_when_exec) | |
504 | { | |
505 | breakpoint_re_set (); | |
506 | insert_breakpoints (); | |
507 | } | |
508 | } | |
509 | ||
510 | /* If we're to be following both parent and child, then fork ourselves, | |
511 | and attach the debugger clone to the child. */ | |
512 | else if (STREQ (follow_mode, "both")) | |
513 | { | |
514 | char pid_suffix[100]; /* Arbitrary length. */ | |
515 | ||
516 | /* Clone ourselves to follow the child. This is the end of our | |
c5aa993b | 517 | involvement with child_pid; our clone will take it from here... */ |
c906108c SS |
518 | dont_repeat (); |
519 | target_clone_and_follow_inferior (child_pid, &followed_child); | |
520 | followed_parent = !followed_child; | |
521 | ||
522 | /* We continue to follow the parent. To help distinguish the two | |
523 | debuggers, though, both we and our clone will reset our prompts. */ | |
524 | sprintf (pid_suffix, "[%d] ", inferior_pid); | |
525 | set_prompt (strcat (get_prompt (), pid_suffix)); | |
526 | } | |
527 | ||
528 | /* The parent and child of a vfork share the same address space. | |
529 | Also, on some targets the order in which vfork and exec events | |
530 | are received for parent in child requires some delicate handling | |
531 | of the events. | |
532 | ||
533 | For instance, on ptrace-based HPUX we receive the child's vfork | |
534 | event first, at which time the parent has been suspended by the | |
535 | OS and is essentially untouchable until the child's exit or second | |
536 | exec event arrives. At that time, the parent's vfork event is | |
537 | delivered to us, and that's when we see and decide how to follow | |
538 | the vfork. But to get to that point, we must continue the child | |
539 | until it execs or exits. To do that smoothly, all breakpoints | |
540 | must be removed from the child, in case there are any set between | |
541 | the vfork() and exec() calls. But removing them from the child | |
542 | also removes them from the parent, due to the shared-address-space | |
543 | nature of a vfork'd parent and child. On HPUX, therefore, we must | |
544 | take care to restore the bp's to the parent before we continue it. | |
545 | Else, it's likely that we may not stop in the expected place. (The | |
546 | worst scenario is when the user tries to step over a vfork() call; | |
547 | the step-resume bp must be restored for the step to properly stop | |
548 | in the parent after the call completes!) | |
549 | ||
550 | Sequence of events, as reported to gdb from HPUX: | |
551 | ||
c5aa993b JM |
552 | Parent Child Action for gdb to take |
553 | ------------------------------------------------------- | |
554 | 1 VFORK Continue child | |
555 | 2 EXEC | |
556 | 3 EXEC or EXIT | |
557 | 4 VFORK */ | |
c906108c SS |
558 | if (has_vforked) |
559 | { | |
560 | target_post_follow_vfork (parent_pid, | |
561 | followed_parent, | |
562 | child_pid, | |
563 | followed_child); | |
564 | } | |
565 | ||
566 | pending_follow.fork_event.saw_parent_fork = 0; | |
567 | pending_follow.fork_event.saw_child_fork = 0; | |
568 | ||
569 | free (follow_mode); | |
570 | } | |
571 | ||
572 | static void | |
96baa820 | 573 | follow_fork (int parent_pid, int child_pid) |
c906108c SS |
574 | { |
575 | follow_inferior_fork (parent_pid, child_pid, 1, 0); | |
576 | } | |
577 | ||
578 | ||
579 | /* Forward declaration. */ | |
96baa820 | 580 | static void follow_exec (int, char *); |
c906108c SS |
581 | |
582 | static void | |
96baa820 | 583 | follow_vfork (int parent_pid, int child_pid) |
c906108c SS |
584 | { |
585 | follow_inferior_fork (parent_pid, child_pid, 0, 1); | |
586 | ||
587 | /* Did we follow the child? Had it exec'd before we saw the parent vfork? */ | |
588 | if (pending_follow.fork_event.saw_child_exec && (inferior_pid == child_pid)) | |
589 | { | |
590 | pending_follow.fork_event.saw_child_exec = 0; | |
591 | pending_follow.kind = TARGET_WAITKIND_SPURIOUS; | |
592 | follow_exec (inferior_pid, pending_follow.execd_pathname); | |
593 | free (pending_follow.execd_pathname); | |
594 | } | |
595 | } | |
c906108c SS |
596 | |
597 | static void | |
96baa820 | 598 | follow_exec (int pid, char *execd_pathname) |
c906108c | 599 | { |
c906108c | 600 | int saved_pid = pid; |
7a292a7a SS |
601 | struct target_ops *tgt; |
602 | ||
603 | if (!may_follow_exec) | |
604 | return; | |
c906108c SS |
605 | |
606 | /* Did this exec() follow a vfork()? If so, we must follow the | |
607 | vfork now too. Do it before following the exec. */ | |
608 | if (follow_vfork_when_exec && | |
609 | (pending_follow.kind == TARGET_WAITKIND_VFORKED)) | |
610 | { | |
611 | pending_follow.kind = TARGET_WAITKIND_SPURIOUS; | |
612 | follow_vfork (inferior_pid, pending_follow.fork_event.child_pid); | |
613 | follow_vfork_when_exec = 0; | |
614 | saved_pid = inferior_pid; | |
615 | ||
616 | /* Did we follow the parent? If so, we're done. If we followed | |
617 | the child then we must also follow its exec(). */ | |
618 | if (inferior_pid == pending_follow.fork_event.parent_pid) | |
619 | return; | |
620 | } | |
621 | ||
622 | /* This is an exec event that we actually wish to pay attention to. | |
623 | Refresh our symbol table to the newly exec'd program, remove any | |
624 | momentary bp's, etc. | |
625 | ||
626 | If there are breakpoints, they aren't really inserted now, | |
627 | since the exec() transformed our inferior into a fresh set | |
628 | of instructions. | |
629 | ||
630 | We want to preserve symbolic breakpoints on the list, since | |
631 | we have hopes that they can be reset after the new a.out's | |
632 | symbol table is read. | |
633 | ||
634 | However, any "raw" breakpoints must be removed from the list | |
635 | (e.g., the solib bp's), since their address is probably invalid | |
636 | now. | |
637 | ||
638 | And, we DON'T want to call delete_breakpoints() here, since | |
639 | that may write the bp's "shadow contents" (the instruction | |
640 | value that was overwritten witha TRAP instruction). Since | |
641 | we now have a new a.out, those shadow contents aren't valid. */ | |
642 | update_breakpoints_after_exec (); | |
643 | ||
644 | /* If there was one, it's gone now. We cannot truly step-to-next | |
645 | statement through an exec(). */ | |
646 | step_resume_breakpoint = NULL; | |
647 | step_range_start = 0; | |
648 | step_range_end = 0; | |
649 | ||
650 | /* If there was one, it's gone now. */ | |
651 | through_sigtramp_breakpoint = NULL; | |
652 | ||
653 | /* What is this a.out's name? */ | |
654 | printf_unfiltered ("Executing new program: %s\n", execd_pathname); | |
655 | ||
656 | /* We've followed the inferior through an exec. Therefore, the | |
657 | inferior has essentially been killed & reborn. */ | |
7a292a7a SS |
658 | |
659 | /* First collect the run target in effect. */ | |
660 | tgt = find_run_target (); | |
661 | /* If we can't find one, things are in a very strange state... */ | |
662 | if (tgt == NULL) | |
663 | error ("Could find run target to save before following exec"); | |
664 | ||
c906108c SS |
665 | gdb_flush (gdb_stdout); |
666 | target_mourn_inferior (); | |
c5aa993b | 667 | inferior_pid = saved_pid; /* Because mourn_inferior resets inferior_pid. */ |
7a292a7a | 668 | push_target (tgt); |
c906108c SS |
669 | |
670 | /* That a.out is now the one to use. */ | |
671 | exec_file_attach (execd_pathname, 0); | |
672 | ||
673 | /* And also is where symbols can be found. */ | |
674 | symbol_file_command (execd_pathname, 0); | |
675 | ||
676 | /* Reset the shared library package. This ensures that we get | |
677 | a shlib event when the child reaches "_start", at which point | |
678 | the dld will have had a chance to initialize the child. */ | |
7a292a7a | 679 | #if defined(SOLIB_RESTART) |
c906108c | 680 | SOLIB_RESTART (); |
7a292a7a SS |
681 | #endif |
682 | #ifdef SOLIB_CREATE_INFERIOR_HOOK | |
c906108c | 683 | SOLIB_CREATE_INFERIOR_HOOK (inferior_pid); |
7a292a7a | 684 | #endif |
c906108c SS |
685 | |
686 | /* Reinsert all breakpoints. (Those which were symbolic have | |
687 | been reset to the proper address in the new a.out, thanks | |
688 | to symbol_file_command...) */ | |
689 | insert_breakpoints (); | |
690 | ||
691 | /* The next resume of this inferior should bring it to the shlib | |
692 | startup breakpoints. (If the user had also set bp's on | |
693 | "main" from the old (parent) process, then they'll auto- | |
694 | matically get reset there in the new process.) */ | |
c906108c SS |
695 | } |
696 | ||
697 | /* Non-zero if we just simulating a single-step. This is needed | |
698 | because we cannot remove the breakpoints in the inferior process | |
699 | until after the `wait' in `wait_for_inferior'. */ | |
700 | static int singlestep_breakpoints_inserted_p = 0; | |
701 | \f | |
702 | ||
703 | /* Things to clean up if we QUIT out of resume (). */ | |
704 | /* ARGSUSED */ | |
705 | static void | |
96baa820 | 706 | resume_cleanups (int arg) |
c906108c SS |
707 | { |
708 | normal_stop (); | |
709 | } | |
710 | ||
711 | static char schedlock_off[] = "off"; | |
712 | static char schedlock_on[] = "on"; | |
713 | static char schedlock_step[] = "step"; | |
714 | static char *scheduler_mode = schedlock_off; | |
715 | static char *scheduler_enums[] = | |
716 | {schedlock_off, schedlock_on, schedlock_step}; | |
717 | ||
718 | static void | |
96baa820 | 719 | set_schedlock_func (char *args, int from_tty, struct cmd_list_element *c) |
c906108c SS |
720 | { |
721 | if (c->type == set_cmd) | |
722 | if (!target_can_lock_scheduler) | |
723 | { | |
724 | scheduler_mode = schedlock_off; | |
725 | error ("Target '%s' cannot support this command.", | |
726 | target_shortname); | |
727 | } | |
728 | } | |
729 | ||
730 | ||
731 | /* Resume the inferior, but allow a QUIT. This is useful if the user | |
732 | wants to interrupt some lengthy single-stepping operation | |
733 | (for child processes, the SIGINT goes to the inferior, and so | |
734 | we get a SIGINT random_signal, but for remote debugging and perhaps | |
735 | other targets, that's not true). | |
736 | ||
737 | STEP nonzero if we should step (zero to continue instead). | |
738 | SIG is the signal to give the inferior (zero for none). */ | |
739 | void | |
96baa820 | 740 | resume (int step, enum target_signal sig) |
c906108c SS |
741 | { |
742 | int should_resume = 1; | |
743 | struct cleanup *old_cleanups = make_cleanup ((make_cleanup_func) | |
744 | resume_cleanups, 0); | |
745 | QUIT; | |
746 | ||
747 | #ifdef CANNOT_STEP_BREAKPOINT | |
748 | /* Most targets can step a breakpoint instruction, thus executing it | |
749 | normally. But if this one cannot, just continue and we will hit | |
750 | it anyway. */ | |
751 | if (step && breakpoints_inserted && breakpoint_here_p (read_pc ())) | |
752 | step = 0; | |
753 | #endif | |
754 | ||
755 | if (SOFTWARE_SINGLE_STEP_P && step) | |
756 | { | |
757 | /* Do it the hard way, w/temp breakpoints */ | |
c5aa993b | 758 | SOFTWARE_SINGLE_STEP (sig, 1 /*insert-breakpoints */ ); |
c906108c SS |
759 | /* ...and don't ask hardware to do it. */ |
760 | step = 0; | |
761 | /* and do not pull these breakpoints until after a `wait' in | |
762 | `wait_for_inferior' */ | |
763 | singlestep_breakpoints_inserted_p = 1; | |
764 | } | |
765 | ||
766 | /* Handle any optimized stores to the inferior NOW... */ | |
767 | #ifdef DO_DEFERRED_STORES | |
768 | DO_DEFERRED_STORES; | |
769 | #endif | |
770 | ||
c906108c SS |
771 | /* If there were any forks/vforks/execs that were caught and are |
772 | now to be followed, then do so. */ | |
773 | switch (pending_follow.kind) | |
774 | { | |
775 | case (TARGET_WAITKIND_FORKED): | |
776 | pending_follow.kind = TARGET_WAITKIND_SPURIOUS; | |
777 | follow_fork (inferior_pid, pending_follow.fork_event.child_pid); | |
778 | break; | |
779 | ||
780 | case (TARGET_WAITKIND_VFORKED): | |
781 | { | |
782 | int saw_child_exec = pending_follow.fork_event.saw_child_exec; | |
783 | ||
784 | pending_follow.kind = TARGET_WAITKIND_SPURIOUS; | |
785 | follow_vfork (inferior_pid, pending_follow.fork_event.child_pid); | |
786 | ||
787 | /* Did we follow the child, but not yet see the child's exec event? | |
c5aa993b JM |
788 | If so, then it actually ought to be waiting for us; we respond to |
789 | parent vfork events. We don't actually want to resume the child | |
790 | in this situation; we want to just get its exec event. */ | |
c906108c SS |
791 | if (!saw_child_exec && |
792 | (inferior_pid == pending_follow.fork_event.child_pid)) | |
793 | should_resume = 0; | |
794 | } | |
795 | break; | |
796 | ||
797 | case (TARGET_WAITKIND_EXECD): | |
798 | /* If we saw a vfork event but couldn't follow it until we saw | |
c5aa993b | 799 | an exec, then now might be the time! */ |
c906108c SS |
800 | pending_follow.kind = TARGET_WAITKIND_SPURIOUS; |
801 | /* follow_exec is called as soon as the exec event is seen. */ | |
802 | break; | |
803 | ||
804 | default: | |
805 | break; | |
806 | } | |
c906108c SS |
807 | |
808 | /* Install inferior's terminal modes. */ | |
809 | target_terminal_inferior (); | |
810 | ||
811 | if (should_resume) | |
812 | { | |
7a292a7a | 813 | if (use_thread_step_needed && thread_step_needed) |
c906108c SS |
814 | { |
815 | /* We stopped on a BPT instruction; | |
816 | don't continue other threads and | |
817 | just step this thread. */ | |
818 | thread_step_needed = 0; | |
819 | ||
820 | if (!breakpoint_here_p (read_pc ())) | |
821 | { | |
822 | /* Breakpoint deleted: ok to do regular resume | |
c5aa993b | 823 | where all the threads either step or continue. */ |
c906108c SS |
824 | target_resume (-1, step, sig); |
825 | } | |
826 | else | |
827 | { | |
828 | if (!step) | |
829 | { | |
830 | warning ("Internal error, changing continue to step."); | |
831 | remove_breakpoints (); | |
832 | breakpoints_inserted = 0; | |
833 | trap_expected = 1; | |
834 | step = 1; | |
835 | } | |
836 | ||
837 | target_resume (inferior_pid, step, sig); | |
838 | } | |
839 | } | |
840 | else | |
c906108c SS |
841 | { |
842 | /* Vanilla resume. */ | |
843 | ||
844 | if ((scheduler_mode == schedlock_on) || | |
845 | (scheduler_mode == schedlock_step && step != 0)) | |
846 | target_resume (inferior_pid, step, sig); | |
847 | else | |
848 | target_resume (-1, step, sig); | |
849 | } | |
850 | } | |
851 | ||
852 | discard_cleanups (old_cleanups); | |
853 | } | |
854 | \f | |
855 | ||
856 | /* Clear out all variables saying what to do when inferior is continued. | |
857 | First do this, then set the ones you want, then call `proceed'. */ | |
858 | ||
859 | void | |
96baa820 | 860 | clear_proceed_status (void) |
c906108c SS |
861 | { |
862 | trap_expected = 0; | |
863 | step_range_start = 0; | |
864 | step_range_end = 0; | |
865 | step_frame_address = 0; | |
866 | step_over_calls = -1; | |
867 | stop_after_trap = 0; | |
868 | stop_soon_quietly = 0; | |
869 | proceed_to_finish = 0; | |
870 | breakpoint_proceeded = 1; /* We're about to proceed... */ | |
871 | ||
872 | /* Discard any remaining commands or status from previous stop. */ | |
873 | bpstat_clear (&stop_bpstat); | |
874 | } | |
875 | ||
876 | /* Basic routine for continuing the program in various fashions. | |
877 | ||
878 | ADDR is the address to resume at, or -1 for resume where stopped. | |
879 | SIGGNAL is the signal to give it, or 0 for none, | |
c5aa993b | 880 | or -1 for act according to how it stopped. |
c906108c | 881 | STEP is nonzero if should trap after one instruction. |
c5aa993b JM |
882 | -1 means return after that and print nothing. |
883 | You should probably set various step_... variables | |
884 | before calling here, if you are stepping. | |
c906108c SS |
885 | |
886 | You should call clear_proceed_status before calling proceed. */ | |
887 | ||
888 | void | |
96baa820 | 889 | proceed (CORE_ADDR addr, enum target_signal siggnal, int step) |
c906108c SS |
890 | { |
891 | int oneproc = 0; | |
892 | ||
893 | if (step > 0) | |
894 | step_start_function = find_pc_function (read_pc ()); | |
895 | if (step < 0) | |
896 | stop_after_trap = 1; | |
897 | ||
898 | if (addr == (CORE_ADDR) - 1) | |
899 | { | |
900 | /* If there is a breakpoint at the address we will resume at, | |
c5aa993b JM |
901 | step one instruction before inserting breakpoints |
902 | so that we do not stop right away (and report a second | |
c906108c SS |
903 | hit at this breakpoint). */ |
904 | ||
905 | if (read_pc () == stop_pc && breakpoint_here_p (read_pc ())) | |
906 | oneproc = 1; | |
907 | ||
908 | #ifndef STEP_SKIPS_DELAY | |
909 | #define STEP_SKIPS_DELAY(pc) (0) | |
910 | #define STEP_SKIPS_DELAY_P (0) | |
911 | #endif | |
912 | /* Check breakpoint_here_p first, because breakpoint_here_p is fast | |
c5aa993b JM |
913 | (it just checks internal GDB data structures) and STEP_SKIPS_DELAY |
914 | is slow (it needs to read memory from the target). */ | |
c906108c SS |
915 | if (STEP_SKIPS_DELAY_P |
916 | && breakpoint_here_p (read_pc () + 4) | |
917 | && STEP_SKIPS_DELAY (read_pc ())) | |
918 | oneproc = 1; | |
919 | } | |
920 | else | |
921 | { | |
922 | write_pc (addr); | |
923 | ||
924 | /* New address; we don't need to single-step a thread | |
c5aa993b JM |
925 | over a breakpoint we just hit, 'cause we aren't |
926 | continuing from there. | |
c906108c | 927 | |
c5aa993b JM |
928 | It's not worth worrying about the case where a user |
929 | asks for a "jump" at the current PC--if they get the | |
930 | hiccup of re-hiting a hit breakpoint, what else do | |
931 | they expect? */ | |
c906108c SS |
932 | thread_step_needed = 0; |
933 | } | |
934 | ||
935 | #ifdef PREPARE_TO_PROCEED | |
936 | /* In a multi-threaded task we may select another thread | |
937 | and then continue or step. | |
938 | ||
939 | But if the old thread was stopped at a breakpoint, it | |
940 | will immediately cause another breakpoint stop without | |
941 | any execution (i.e. it will report a breakpoint hit | |
942 | incorrectly). So we must step over it first. | |
943 | ||
944 | PREPARE_TO_PROCEED checks the current thread against the thread | |
945 | that reported the most recent event. If a step-over is required | |
946 | it returns TRUE and sets the current thread to the old thread. */ | |
9e086581 | 947 | if (PREPARE_TO_PROCEED (1) && breakpoint_here_p (read_pc ())) |
c906108c SS |
948 | { |
949 | oneproc = 1; | |
950 | thread_step_needed = 1; | |
951 | } | |
952 | ||
953 | #endif /* PREPARE_TO_PROCEED */ | |
954 | ||
955 | #ifdef HP_OS_BUG | |
956 | if (trap_expected_after_continue) | |
957 | { | |
958 | /* If (step == 0), a trap will be automatically generated after | |
c5aa993b JM |
959 | the first instruction is executed. Force step one |
960 | instruction to clear this condition. This should not occur | |
961 | if step is nonzero, but it is harmless in that case. */ | |
c906108c SS |
962 | oneproc = 1; |
963 | trap_expected_after_continue = 0; | |
964 | } | |
965 | #endif /* HP_OS_BUG */ | |
966 | ||
967 | if (oneproc) | |
968 | /* We will get a trace trap after one instruction. | |
969 | Continue it automatically and insert breakpoints then. */ | |
970 | trap_expected = 1; | |
971 | else | |
972 | { | |
973 | int temp = insert_breakpoints (); | |
974 | if (temp) | |
975 | { | |
976 | print_sys_errmsg ("ptrace", temp); | |
977 | error ("Cannot insert breakpoints.\n\ | |
978 | The same program may be running in another process."); | |
979 | } | |
980 | ||
981 | breakpoints_inserted = 1; | |
982 | } | |
983 | ||
984 | if (siggnal != TARGET_SIGNAL_DEFAULT) | |
985 | stop_signal = siggnal; | |
986 | /* If this signal should not be seen by program, | |
987 | give it zero. Used for debugging signals. */ | |
988 | else if (!signal_program[stop_signal]) | |
989 | stop_signal = TARGET_SIGNAL_0; | |
990 | ||
991 | annotate_starting (); | |
992 | ||
993 | /* Make sure that output from GDB appears before output from the | |
994 | inferior. */ | |
995 | gdb_flush (gdb_stdout); | |
996 | ||
997 | /* Resume inferior. */ | |
998 | resume (oneproc || step || bpstat_should_step (), stop_signal); | |
999 | ||
1000 | /* Wait for it to stop (if not standalone) | |
1001 | and in any case decode why it stopped, and act accordingly. */ | |
43ff13b4 JM |
1002 | /* Do this only if we are not using the event loop, or if the target |
1003 | does not support asynchronous execution. */ | |
1004 | if (!async_p || !target_has_async) | |
1005 | { | |
1006 | wait_for_inferior (); | |
1007 | normal_stop (); | |
1008 | } | |
c906108c SS |
1009 | } |
1010 | ||
1011 | /* Record the pc and sp of the program the last time it stopped. | |
1012 | These are just used internally by wait_for_inferior, but need | |
1013 | to be preserved over calls to it and cleared when the inferior | |
1014 | is started. */ | |
1015 | static CORE_ADDR prev_pc; | |
1016 | static CORE_ADDR prev_func_start; | |
1017 | static char *prev_func_name; | |
1018 | \f | |
1019 | ||
1020 | /* Start remote-debugging of a machine over a serial link. */ | |
96baa820 | 1021 | |
c906108c | 1022 | void |
96baa820 | 1023 | start_remote (void) |
c906108c SS |
1024 | { |
1025 | init_thread_list (); | |
1026 | init_wait_for_inferior (); | |
1027 | stop_soon_quietly = 1; | |
1028 | trap_expected = 0; | |
43ff13b4 JM |
1029 | |
1030 | /* Go on waiting only in case gdb is not started in async mode, or | |
1031 | in case the target doesn't support async execution. */ | |
1032 | if (!async_p || !target_has_async) | |
1033 | { | |
1034 | wait_for_inferior (); | |
1035 | normal_stop (); | |
1036 | } | |
1037 | else | |
1038 | { | |
1039 | /* The 'tar rem' command should always look synchronous, | |
c5aa993b JM |
1040 | i.e. display the prompt only once it has connected and |
1041 | started the target. */ | |
43ff13b4 JM |
1042 | sync_execution = 1; |
1043 | push_prompt ("", "", ""); | |
1044 | delete_file_handler (input_fd); | |
1045 | target_executing = 1; | |
1046 | } | |
c906108c SS |
1047 | } |
1048 | ||
1049 | /* Initialize static vars when a new inferior begins. */ | |
1050 | ||
1051 | void | |
96baa820 | 1052 | init_wait_for_inferior (void) |
c906108c SS |
1053 | { |
1054 | /* These are meaningless until the first time through wait_for_inferior. */ | |
1055 | prev_pc = 0; | |
1056 | prev_func_start = 0; | |
1057 | prev_func_name = NULL; | |
1058 | ||
1059 | #ifdef HP_OS_BUG | |
1060 | trap_expected_after_continue = 0; | |
1061 | #endif | |
1062 | breakpoints_inserted = 0; | |
1063 | breakpoint_init_inferior (inf_starting); | |
1064 | ||
1065 | /* Don't confuse first call to proceed(). */ | |
1066 | stop_signal = TARGET_SIGNAL_0; | |
1067 | ||
1068 | /* The first resume is not following a fork/vfork/exec. */ | |
1069 | pending_follow.kind = TARGET_WAITKIND_SPURIOUS; /* I.e., none. */ | |
1070 | pending_follow.fork_event.saw_parent_fork = 0; | |
1071 | pending_follow.fork_event.saw_child_fork = 0; | |
1072 | pending_follow.fork_event.saw_child_exec = 0; | |
1073 | ||
1074 | /* See wait_for_inferior's handling of SYSCALL_ENTRY/RETURN events. */ | |
1075 | number_of_threads_in_syscalls = 0; | |
1076 | ||
1077 | clear_proceed_status (); | |
1078 | } | |
1079 | ||
1080 | static void | |
96baa820 | 1081 | delete_breakpoint_current_contents (void *arg) |
c906108c SS |
1082 | { |
1083 | struct breakpoint **breakpointp = (struct breakpoint **) arg; | |
1084 | if (*breakpointp != NULL) | |
1085 | { | |
1086 | delete_breakpoint (*breakpointp); | |
1087 | *breakpointp = NULL; | |
1088 | } | |
1089 | } | |
1090 | \f | |
b83266a0 SS |
1091 | /* This enum encodes possible reasons for doing a target_wait, so that |
1092 | wfi can call target_wait in one place. (Ultimately the call will be | |
1093 | moved out of the infinite loop entirely.) */ | |
1094 | ||
c5aa993b JM |
1095 | enum infwait_states |
1096 | { | |
cd0fc7c3 SS |
1097 | infwait_normal_state, |
1098 | infwait_thread_hop_state, | |
1099 | infwait_nullified_state, | |
1100 | infwait_nonstep_watch_state | |
b83266a0 SS |
1101 | }; |
1102 | ||
cd0fc7c3 SS |
1103 | /* This structure contains what used to be local variables in |
1104 | wait_for_inferior. Probably many of them can return to being | |
1105 | locals in handle_inferior_event. */ | |
1106 | ||
c5aa993b JM |
1107 | struct execution_control_state |
1108 | { | |
1109 | struct target_waitstatus ws; | |
1110 | struct target_waitstatus *wp; | |
1111 | int another_trap; | |
1112 | int random_signal; | |
1113 | CORE_ADDR stop_func_start; | |
1114 | CORE_ADDR stop_func_end; | |
1115 | char *stop_func_name; | |
1116 | struct symtab_and_line sal; | |
1117 | int remove_breakpoints_on_following_step; | |
1118 | int current_line; | |
1119 | struct symtab *current_symtab; | |
1120 | int handling_longjmp; /* FIXME */ | |
1121 | int pid; | |
1122 | int saved_inferior_pid; | |
1123 | int update_step_sp; | |
1124 | int stepping_through_solib_after_catch; | |
1125 | bpstat stepping_through_solib_catchpoints; | |
1126 | int enable_hw_watchpoints_after_wait; | |
1127 | int stepping_through_sigtramp; | |
1128 | int new_thread_event; | |
1129 | struct target_waitstatus tmpstatus; | |
1130 | enum infwait_states infwait_state; | |
1131 | int waiton_pid; | |
1132 | int wait_some_more; | |
1133 | }; | |
1134 | ||
96baa820 | 1135 | void init_execution_control_state (struct execution_control_state * ecs); |
c5aa993b | 1136 | |
96baa820 | 1137 | void handle_inferior_event (struct execution_control_state * ecs); |
cd0fc7c3 SS |
1138 | |
1139 | /* Wait for control to return from inferior to debugger. | |
1140 | If inferior gets a signal, we may decide to start it up again | |
1141 | instead of returning. That is why there is a loop in this function. | |
1142 | When this function actually returns it means the inferior | |
1143 | should be left stopped and GDB should read more commands. */ | |
1144 | ||
1145 | void | |
96baa820 | 1146 | wait_for_inferior (void) |
cd0fc7c3 SS |
1147 | { |
1148 | struct cleanup *old_cleanups; | |
1149 | struct execution_control_state ecss; | |
1150 | struct execution_control_state *ecs; | |
c906108c SS |
1151 | |
1152 | old_cleanups = make_cleanup (delete_breakpoint_current_contents, | |
1153 | &step_resume_breakpoint); | |
1154 | make_cleanup (delete_breakpoint_current_contents, | |
1155 | &through_sigtramp_breakpoint); | |
cd0fc7c3 SS |
1156 | |
1157 | /* wfi still stays in a loop, so it's OK just to take the address of | |
1158 | a local to get the ecs pointer. */ | |
1159 | ecs = &ecss; | |
1160 | ||
1161 | /* Fill in with reasonable starting values. */ | |
1162 | init_execution_control_state (ecs); | |
1163 | ||
c906108c SS |
1164 | thread_step_needed = 0; |
1165 | ||
c906108c | 1166 | /* We'll update this if & when we switch to a new thread. */ |
7a292a7a SS |
1167 | if (may_switch_from_inferior_pid) |
1168 | switched_from_inferior_pid = inferior_pid; | |
c906108c | 1169 | |
cd0fc7c3 SS |
1170 | overlay_cache_invalid = 1; |
1171 | ||
1172 | /* We have to invalidate the registers BEFORE calling target_wait | |
1173 | because they can be loaded from the target while in target_wait. | |
1174 | This makes remote debugging a bit more efficient for those | |
1175 | targets that provide critical registers as part of their normal | |
1176 | status mechanism. */ | |
1177 | ||
1178 | registers_changed (); | |
b83266a0 | 1179 | |
c906108c SS |
1180 | while (1) |
1181 | { | |
cd0fc7c3 SS |
1182 | if (target_wait_hook) |
1183 | ecs->pid = target_wait_hook (ecs->waiton_pid, ecs->wp); | |
1184 | else | |
1185 | ecs->pid = target_wait (ecs->waiton_pid, ecs->wp); | |
c906108c | 1186 | |
cd0fc7c3 SS |
1187 | /* Now figure out what to do with the result of the result. */ |
1188 | handle_inferior_event (ecs); | |
c906108c | 1189 | |
cd0fc7c3 SS |
1190 | if (!ecs->wait_some_more) |
1191 | break; | |
1192 | } | |
1193 | do_cleanups (old_cleanups); | |
1194 | } | |
c906108c | 1195 | |
43ff13b4 JM |
1196 | /* Asynchronous version of wait_for_inferior. It is called by the |
1197 | event loop whenever a change of state is detected on the file | |
1198 | descriptor corresponding to the target. It can be called more than | |
1199 | once to complete a single execution command. In such cases we need | |
1200 | to keep the state in a global variable ASYNC_ECSS. If it is the | |
1201 | last time that this function is called for a single execution | |
1202 | command, then report to the user that the inferior has stopped, and | |
1203 | do the necessary cleanups. */ | |
1204 | ||
1205 | struct execution_control_state async_ecss; | |
1206 | struct execution_control_state *async_ecs; | |
1207 | ||
1208 | void | |
96baa820 | 1209 | fetch_inferior_event (void) |
43ff13b4 JM |
1210 | { |
1211 | static struct cleanup *old_cleanups; | |
1212 | ||
c5aa993b | 1213 | async_ecs = &async_ecss; |
43ff13b4 JM |
1214 | |
1215 | if (!async_ecs->wait_some_more) | |
1216 | { | |
1217 | old_cleanups = make_exec_cleanup (delete_breakpoint_current_contents, | |
c5aa993b | 1218 | &step_resume_breakpoint); |
43ff13b4 | 1219 | make_exec_cleanup (delete_breakpoint_current_contents, |
c5aa993b | 1220 | &through_sigtramp_breakpoint); |
43ff13b4 JM |
1221 | |
1222 | /* Fill in with reasonable starting values. */ | |
1223 | init_execution_control_state (async_ecs); | |
1224 | ||
1225 | thread_step_needed = 0; | |
1226 | ||
1227 | /* We'll update this if & when we switch to a new thread. */ | |
1228 | if (may_switch_from_inferior_pid) | |
1229 | switched_from_inferior_pid = inferior_pid; | |
1230 | ||
1231 | overlay_cache_invalid = 1; | |
1232 | ||
1233 | /* We have to invalidate the registers BEFORE calling target_wait | |
c5aa993b JM |
1234 | because they can be loaded from the target while in target_wait. |
1235 | This makes remote debugging a bit more efficient for those | |
1236 | targets that provide critical registers as part of their normal | |
1237 | status mechanism. */ | |
43ff13b4 JM |
1238 | |
1239 | registers_changed (); | |
1240 | } | |
1241 | ||
1242 | if (target_wait_hook) | |
1243 | async_ecs->pid = target_wait_hook (async_ecs->waiton_pid, async_ecs->wp); | |
1244 | else | |
1245 | async_ecs->pid = target_wait (async_ecs->waiton_pid, async_ecs->wp); | |
1246 | ||
1247 | /* Now figure out what to do with the result of the result. */ | |
1248 | handle_inferior_event (async_ecs); | |
1249 | ||
1250 | if (!async_ecs->wait_some_more) | |
1251 | { | |
adf40b2e JM |
1252 | /* Do only the cleanups that have been added by this |
1253 | function. Let the continuations for the commands do the rest, | |
1254 | if there are any. */ | |
43ff13b4 JM |
1255 | do_exec_cleanups (old_cleanups); |
1256 | normal_stop (); | |
1257 | /* Is there anything left to do for the command issued to | |
1258 | complete? */ | |
1259 | do_all_continuations (); | |
1260 | /* Reset things after target has stopped for the async commands. */ | |
1261 | complete_execution (); | |
1262 | } | |
1263 | } | |
1264 | ||
cd0fc7c3 SS |
1265 | /* Prepare an execution control state for looping through a |
1266 | wait_for_inferior-type loop. */ | |
1267 | ||
1268 | void | |
96baa820 | 1269 | init_execution_control_state (struct execution_control_state *ecs) |
cd0fc7c3 SS |
1270 | { |
1271 | ecs->random_signal = 0; | |
1272 | ecs->remove_breakpoints_on_following_step = 0; | |
1273 | ecs->handling_longjmp = 0; /* FIXME */ | |
1274 | ecs->update_step_sp = 0; | |
1275 | ecs->stepping_through_solib_after_catch = 0; | |
1276 | ecs->stepping_through_solib_catchpoints = NULL; | |
1277 | ecs->enable_hw_watchpoints_after_wait = 0; | |
1278 | ecs->stepping_through_sigtramp = 0; | |
1279 | ecs->sal = find_pc_line (prev_pc, 0); | |
1280 | ecs->current_line = ecs->sal.line; | |
1281 | ecs->current_symtab = ecs->sal.symtab; | |
1282 | ecs->infwait_state = infwait_normal_state; | |
1283 | ecs->waiton_pid = -1; | |
1284 | ecs->wp = &(ecs->ws); | |
1285 | } | |
1286 | ||
a0b3c4fd | 1287 | /* Call this function before setting step_resume_breakpoint, as a |
53a5351d JM |
1288 | sanity check. There should never be more than one step-resume |
1289 | breakpoint per thread, so we should never be setting a new | |
1290 | step_resume_breakpoint when one is already active. */ | |
a0b3c4fd | 1291 | static void |
96baa820 | 1292 | check_for_old_step_resume_breakpoint (void) |
a0b3c4fd JM |
1293 | { |
1294 | if (step_resume_breakpoint) | |
1295 | warning ("GDB bug: infrun.c (wait_for_inferior): dropping old step_resume breakpoint"); | |
1296 | } | |
1297 | ||
cd0fc7c3 SS |
1298 | /* Given an execution control state that has been freshly filled in |
1299 | by an event from the inferior, figure out what it means and take | |
1300 | appropriate action. */ | |
c906108c | 1301 | |
cd0fc7c3 | 1302 | void |
96baa820 | 1303 | handle_inferior_event (struct execution_control_state *ecs) |
cd0fc7c3 SS |
1304 | { |
1305 | CORE_ADDR tmp; | |
1306 | int stepped_after_stopped_by_watchpoint; | |
1307 | ||
1308 | /* Keep this extra brace for now, minimizes diffs. */ | |
1309 | { | |
c5aa993b JM |
1310 | switch (ecs->infwait_state) |
1311 | { | |
1312 | case infwait_normal_state: | |
1313 | /* Since we've done a wait, we have a new event. Don't | |
1314 | carry over any expectations about needing to step over a | |
1315 | breakpoint. */ | |
1316 | thread_step_needed = 0; | |
1317 | ||
1318 | /* See comments where a TARGET_WAITKIND_SYSCALL_RETURN event | |
1319 | is serviced in this loop, below. */ | |
1320 | if (ecs->enable_hw_watchpoints_after_wait) | |
1321 | { | |
1322 | TARGET_ENABLE_HW_WATCHPOINTS (inferior_pid); | |
1323 | ecs->enable_hw_watchpoints_after_wait = 0; | |
1324 | } | |
1325 | stepped_after_stopped_by_watchpoint = 0; | |
1326 | break; | |
b83266a0 | 1327 | |
c5aa993b JM |
1328 | case infwait_thread_hop_state: |
1329 | insert_breakpoints (); | |
c906108c | 1330 | |
c5aa993b JM |
1331 | /* We need to restart all the threads now, |
1332 | * unles we're running in scheduler-locked mode. | |
1333 | * FIXME: shouldn't we look at currently_stepping ()? | |
1334 | */ | |
1335 | if (scheduler_mode == schedlock_on) | |
1336 | target_resume (ecs->pid, 0, TARGET_SIGNAL_0); | |
1337 | else | |
1338 | target_resume (-1, 0, TARGET_SIGNAL_0); | |
1339 | ecs->infwait_state = infwait_normal_state; | |
1340 | goto wfi_continue; | |
c906108c | 1341 | |
c5aa993b JM |
1342 | case infwait_nullified_state: |
1343 | break; | |
b83266a0 | 1344 | |
c5aa993b JM |
1345 | case infwait_nonstep_watch_state: |
1346 | insert_breakpoints (); | |
b83266a0 | 1347 | |
c5aa993b JM |
1348 | /* FIXME-maybe: is this cleaner than setting a flag? Does it |
1349 | handle things like signals arriving and other things happening | |
1350 | in combination correctly? */ | |
1351 | stepped_after_stopped_by_watchpoint = 1; | |
1352 | break; | |
1353 | } | |
1354 | ecs->infwait_state = infwait_normal_state; | |
c906108c | 1355 | |
c5aa993b | 1356 | flush_cached_frames (); |
c906108c | 1357 | |
c5aa993b | 1358 | /* If it's a new process, add it to the thread database */ |
c906108c | 1359 | |
c5aa993b | 1360 | ecs->new_thread_event = ((ecs->pid != inferior_pid) && !in_thread_list (ecs->pid)); |
c906108c | 1361 | |
c5aa993b JM |
1362 | if (ecs->ws.kind != TARGET_WAITKIND_EXITED |
1363 | && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED | |
1364 | && ecs->new_thread_event) | |
1365 | { | |
1366 | add_thread (ecs->pid); | |
c906108c | 1367 | |
c5aa993b | 1368 | printf_filtered ("[New %s]\n", target_pid_or_tid_to_str (ecs->pid)); |
c906108c SS |
1369 | |
1370 | #if 0 | |
c5aa993b JM |
1371 | /* NOTE: This block is ONLY meant to be invoked in case of a |
1372 | "thread creation event"! If it is invoked for any other | |
1373 | sort of event (such as a new thread landing on a breakpoint), | |
1374 | the event will be discarded, which is almost certainly | |
1375 | a bad thing! | |
1376 | ||
1377 | To avoid this, the low-level module (eg. target_wait) | |
1378 | should call in_thread_list and add_thread, so that the | |
1379 | new thread is known by the time we get here. */ | |
1380 | ||
1381 | /* We may want to consider not doing a resume here in order | |
1382 | to give the user a chance to play with the new thread. | |
1383 | It might be good to make that a user-settable option. */ | |
1384 | ||
1385 | /* At this point, all threads are stopped (happens | |
1386 | automatically in either the OS or the native code). | |
1387 | Therefore we need to continue all threads in order to | |
1388 | make progress. */ | |
1389 | ||
1390 | target_resume (-1, 0, TARGET_SIGNAL_0); | |
1391 | goto wfi_continue; | |
c906108c | 1392 | #endif |
c5aa993b | 1393 | } |
c906108c | 1394 | |
c5aa993b JM |
1395 | switch (ecs->ws.kind) |
1396 | { | |
1397 | case TARGET_WAITKIND_LOADED: | |
1398 | /* Ignore gracefully during startup of the inferior, as it | |
1399 | might be the shell which has just loaded some objects, | |
1400 | otherwise add the symbols for the newly loaded objects. */ | |
c906108c | 1401 | #ifdef SOLIB_ADD |
c5aa993b JM |
1402 | if (!stop_soon_quietly) |
1403 | { | |
1404 | /* Remove breakpoints, SOLIB_ADD might adjust | |
1405 | breakpoint addresses via breakpoint_re_set. */ | |
1406 | if (breakpoints_inserted) | |
1407 | remove_breakpoints (); | |
c906108c | 1408 | |
c5aa993b JM |
1409 | /* Check for any newly added shared libraries if we're |
1410 | supposed to be adding them automatically. */ | |
1411 | if (auto_solib_add) | |
1412 | { | |
1413 | /* Switch terminal for any messages produced by | |
1414 | breakpoint_re_set. */ | |
1415 | target_terminal_ours_for_output (); | |
1416 | SOLIB_ADD (NULL, 0, NULL); | |
1417 | target_terminal_inferior (); | |
1418 | } | |
c906108c | 1419 | |
c5aa993b JM |
1420 | /* Reinsert breakpoints and continue. */ |
1421 | if (breakpoints_inserted) | |
1422 | insert_breakpoints (); | |
1423 | } | |
c906108c | 1424 | #endif |
c5aa993b JM |
1425 | resume (0, TARGET_SIGNAL_0); |
1426 | goto wfi_continue; | |
1427 | ||
1428 | case TARGET_WAITKIND_SPURIOUS: | |
1429 | resume (0, TARGET_SIGNAL_0); | |
1430 | goto wfi_continue; | |
1431 | ||
1432 | case TARGET_WAITKIND_EXITED: | |
1433 | target_terminal_ours (); /* Must do this before mourn anyway */ | |
1434 | annotate_exited (ecs->ws.value.integer); | |
1435 | if (ecs->ws.value.integer) | |
1436 | printf_filtered ("\nProgram exited with code 0%o.\n", | |
1437 | (unsigned int) ecs->ws.value.integer); | |
1438 | else | |
1439 | printf_filtered ("\nProgram exited normally.\n"); | |
1440 | ||
1441 | /* Record the exit code in the convenience variable $_exitcode, so | |
1442 | that the user can inspect this again later. */ | |
1443 | set_internalvar (lookup_internalvar ("_exitcode"), | |
1444 | value_from_longest (builtin_type_int, | |
1445 | (LONGEST) ecs->ws.value.integer)); | |
1446 | gdb_flush (gdb_stdout); | |
1447 | target_mourn_inferior (); | |
1448 | singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P */ | |
1449 | stop_print_frame = 0; | |
1450 | goto stop_stepping; | |
1451 | ||
1452 | case TARGET_WAITKIND_SIGNALLED: | |
1453 | stop_print_frame = 0; | |
1454 | stop_signal = ecs->ws.value.sig; | |
1455 | target_terminal_ours (); /* Must do this before mourn anyway */ | |
1456 | annotate_signalled (); | |
1457 | ||
1458 | /* This looks pretty bogus to me. Doesn't TARGET_WAITKIND_SIGNALLED | |
1459 | mean it is already dead? This has been here since GDB 2.8, so | |
1460 | perhaps it means rms didn't understand unix waitstatuses? | |
1461 | For the moment I'm just kludging around this in remote.c | |
1462 | rather than trying to change it here --kingdon, 5 Dec 1994. */ | |
1463 | target_kill (); /* kill mourns as well */ | |
1464 | ||
1465 | printf_filtered ("\nProgram terminated with signal "); | |
1466 | annotate_signal_name (); | |
1467 | printf_filtered ("%s", target_signal_to_name (stop_signal)); | |
1468 | annotate_signal_name_end (); | |
1469 | printf_filtered (", "); | |
1470 | annotate_signal_string (); | |
1471 | printf_filtered ("%s", target_signal_to_string (stop_signal)); | |
1472 | annotate_signal_string_end (); | |
1473 | printf_filtered (".\n"); | |
1474 | ||
1475 | printf_filtered ("The program no longer exists.\n"); | |
1476 | gdb_flush (gdb_stdout); | |
1477 | singlestep_breakpoints_inserted_p = 0; /*SOFTWARE_SINGLE_STEP_P */ | |
1478 | goto stop_stepping; | |
1479 | ||
1480 | /* The following are the only cases in which we keep going; | |
1481 | the above cases end in a continue or goto. */ | |
1482 | case TARGET_WAITKIND_FORKED: | |
1483 | stop_signal = TARGET_SIGNAL_TRAP; | |
1484 | pending_follow.kind = ecs->ws.kind; | |
1485 | ||
1486 | /* Ignore fork events reported for the parent; we're only | |
1487 | interested in reacting to forks of the child. Note that | |
1488 | we expect the child's fork event to be available if we | |
1489 | waited for it now. */ | |
1490 | if (inferior_pid == ecs->pid) | |
1491 | { | |
1492 | pending_follow.fork_event.saw_parent_fork = 1; | |
1493 | pending_follow.fork_event.parent_pid = ecs->pid; | |
1494 | pending_follow.fork_event.child_pid = ecs->ws.value.related_pid; | |
1495 | goto wfi_continue; | |
1496 | } | |
1497 | else | |
1498 | { | |
1499 | pending_follow.fork_event.saw_child_fork = 1; | |
1500 | pending_follow.fork_event.child_pid = ecs->pid; | |
1501 | pending_follow.fork_event.parent_pid = ecs->ws.value.related_pid; | |
1502 | } | |
c906108c | 1503 | |
c5aa993b JM |
1504 | stop_pc = read_pc_pid (ecs->pid); |
1505 | ecs->saved_inferior_pid = inferior_pid; | |
1506 | inferior_pid = ecs->pid; | |
1507 | stop_bpstat = bpstat_stop_status | |
1508 | (&stop_pc, | |
1509 | (DECR_PC_AFTER_BREAK ? | |
1510 | (prev_pc != stop_pc - DECR_PC_AFTER_BREAK | |
1511 | && currently_stepping (ecs)) | |
1512 | : 0) | |
1513 | ); | |
1514 | ecs->random_signal = !bpstat_explains_signal (stop_bpstat); | |
1515 | inferior_pid = ecs->saved_inferior_pid; | |
1516 | goto process_event_stop_test; | |
1517 | ||
1518 | /* If this a platform which doesn't allow a debugger to touch a | |
1519 | vfork'd inferior until after it exec's, then we'd best keep | |
1520 | our fingers entirely off the inferior, other than continuing | |
1521 | it. This has the unfortunate side-effect that catchpoints | |
1522 | of vforks will be ignored. But since the platform doesn't | |
1523 | allow the inferior be touched at vfork time, there's really | |
1524 | little choice. */ | |
1525 | case TARGET_WAITKIND_VFORKED: | |
1526 | stop_signal = TARGET_SIGNAL_TRAP; | |
1527 | pending_follow.kind = ecs->ws.kind; | |
1528 | ||
1529 | /* Is this a vfork of the parent? If so, then give any | |
1530 | vfork catchpoints a chance to trigger now. (It's | |
1531 | dangerous to do so if the child canot be touched until | |
1532 | it execs, and the child has not yet exec'd. We probably | |
1533 | should warn the user to that effect when the catchpoint | |
1534 | triggers...) */ | |
1535 | if (ecs->pid == inferior_pid) | |
1536 | { | |
1537 | pending_follow.fork_event.saw_parent_fork = 1; | |
1538 | pending_follow.fork_event.parent_pid = ecs->pid; | |
1539 | pending_follow.fork_event.child_pid = ecs->ws.value.related_pid; | |
1540 | } | |
c906108c | 1541 | |
c5aa993b JM |
1542 | /* If we've seen the child's vfork event but cannot really touch |
1543 | the child until it execs, then we must continue the child now. | |
1544 | Else, give any vfork catchpoints a chance to trigger now. */ | |
1545 | else | |
1546 | { | |
1547 | pending_follow.fork_event.saw_child_fork = 1; | |
1548 | pending_follow.fork_event.child_pid = ecs->pid; | |
1549 | pending_follow.fork_event.parent_pid = ecs->ws.value.related_pid; | |
1550 | target_post_startup_inferior (pending_follow.fork_event.child_pid); | |
1551 | follow_vfork_when_exec = !target_can_follow_vfork_prior_to_exec (); | |
1552 | if (follow_vfork_when_exec) | |
1553 | { | |
1554 | target_resume (ecs->pid, 0, TARGET_SIGNAL_0); | |
1555 | goto wfi_continue; | |
1556 | } | |
1557 | } | |
c906108c | 1558 | |
c5aa993b JM |
1559 | stop_pc = read_pc (); |
1560 | stop_bpstat = bpstat_stop_status | |
1561 | (&stop_pc, | |
1562 | (DECR_PC_AFTER_BREAK ? | |
1563 | (prev_pc != stop_pc - DECR_PC_AFTER_BREAK | |
1564 | && currently_stepping (ecs)) | |
1565 | : 0) | |
1566 | ); | |
1567 | ecs->random_signal = !bpstat_explains_signal (stop_bpstat); | |
1568 | goto process_event_stop_test; | |
1569 | ||
1570 | case TARGET_WAITKIND_EXECD: | |
1571 | stop_signal = TARGET_SIGNAL_TRAP; | |
1572 | ||
1573 | /* Is this a target which reports multiple exec events per actual | |
1574 | call to exec()? (HP-UX using ptrace does, for example.) If so, | |
1575 | ignore all but the last one. Just resume the exec'r, and wait | |
1576 | for the next exec event. */ | |
1577 | if (inferior_ignoring_leading_exec_events) | |
1578 | { | |
1579 | inferior_ignoring_leading_exec_events--; | |
1580 | if (pending_follow.kind == TARGET_WAITKIND_VFORKED) | |
1581 | ENSURE_VFORKING_PARENT_REMAINS_STOPPED (pending_follow.fork_event.parent_pid); | |
1582 | target_resume (ecs->pid, 0, TARGET_SIGNAL_0); | |
1583 | goto wfi_continue; | |
1584 | } | |
1585 | inferior_ignoring_leading_exec_events = | |
1586 | target_reported_exec_events_per_exec_call () - 1; | |
c906108c | 1587 | |
96baa820 JM |
1588 | pending_follow.execd_pathname = |
1589 | savestring (ecs->ws.value.execd_pathname, | |
1590 | strlen (ecs->ws.value.execd_pathname)); | |
c906108c | 1591 | |
c5aa993b JM |
1592 | /* Did inferior_pid exec, or did a (possibly not-yet-followed) |
1593 | child of a vfork exec? | |
c906108c | 1594 | |
c5aa993b JM |
1595 | ??rehrauer: This is unabashedly an HP-UX specific thing. On |
1596 | HP-UX, events associated with a vforking inferior come in | |
1597 | threes: a vfork event for the child (always first), followed | |
1598 | a vfork event for the parent and an exec event for the child. | |
1599 | The latter two can come in either order. | |
c906108c | 1600 | |
c5aa993b JM |
1601 | If we get the parent vfork event first, life's good: We follow |
1602 | either the parent or child, and then the child's exec event is | |
1603 | a "don't care". | |
c906108c | 1604 | |
c5aa993b JM |
1605 | But if we get the child's exec event first, then we delay |
1606 | responding to it until we handle the parent's vfork. Because, | |
1607 | otherwise we can't satisfy a "catch vfork". */ | |
1608 | if (pending_follow.kind == TARGET_WAITKIND_VFORKED) | |
1609 | { | |
1610 | pending_follow.fork_event.saw_child_exec = 1; | |
1611 | ||
1612 | /* On some targets, the child must be resumed before | |
1613 | the parent vfork event is delivered. A single-step | |
1614 | suffices. */ | |
1615 | if (RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK ()) | |
1616 | target_resume (ecs->pid, 1, TARGET_SIGNAL_0); | |
1617 | /* We expect the parent vfork event to be available now. */ | |
1618 | goto wfi_continue; | |
1619 | } | |
c906108c | 1620 | |
c5aa993b JM |
1621 | /* This causes the eventpoints and symbol table to be reset. Must |
1622 | do this now, before trying to determine whether to stop. */ | |
1623 | follow_exec (inferior_pid, pending_follow.execd_pathname); | |
1624 | free (pending_follow.execd_pathname); | |
1625 | ||
1626 | stop_pc = read_pc_pid (ecs->pid); | |
1627 | ecs->saved_inferior_pid = inferior_pid; | |
1628 | inferior_pid = ecs->pid; | |
1629 | stop_bpstat = bpstat_stop_status | |
1630 | (&stop_pc, | |
1631 | (DECR_PC_AFTER_BREAK ? | |
1632 | (prev_pc != stop_pc - DECR_PC_AFTER_BREAK | |
1633 | && currently_stepping (ecs)) | |
1634 | : 0) | |
1635 | ); | |
1636 | ecs->random_signal = !bpstat_explains_signal (stop_bpstat); | |
1637 | inferior_pid = ecs->saved_inferior_pid; | |
1638 | goto process_event_stop_test; | |
1639 | ||
1640 | /* These syscall events are returned on HP-UX, as part of its | |
1641 | implementation of page-protection-based "hardware" watchpoints. | |
1642 | HP-UX has unfortunate interactions between page-protections and | |
1643 | some system calls. Our solution is to disable hardware watches | |
1644 | when a system call is entered, and reenable them when the syscall | |
1645 | completes. The downside of this is that we may miss the precise | |
1646 | point at which a watched piece of memory is modified. "Oh well." | |
1647 | ||
1648 | Note that we may have multiple threads running, which may each | |
1649 | enter syscalls at roughly the same time. Since we don't have a | |
1650 | good notion currently of whether a watched piece of memory is | |
1651 | thread-private, we'd best not have any page-protections active | |
1652 | when any thread is in a syscall. Thus, we only want to reenable | |
1653 | hardware watches when no threads are in a syscall. | |
1654 | ||
1655 | Also, be careful not to try to gather much state about a thread | |
1656 | that's in a syscall. It's frequently a losing proposition. */ | |
1657 | case TARGET_WAITKIND_SYSCALL_ENTRY: | |
1658 | number_of_threads_in_syscalls++; | |
1659 | if (number_of_threads_in_syscalls == 1) | |
1660 | { | |
1661 | TARGET_DISABLE_HW_WATCHPOINTS (inferior_pid); | |
1662 | } | |
1663 | resume (0, TARGET_SIGNAL_0); | |
1664 | goto wfi_continue; | |
c906108c | 1665 | |
c5aa993b | 1666 | /* Before examining the threads further, step this thread to |
c906108c SS |
1667 | get it entirely out of the syscall. (We get notice of the |
1668 | event when the thread is just on the verge of exiting a | |
1669 | syscall. Stepping one instruction seems to get it back | |
1670 | into user code.) | |
1671 | ||
1672 | Note that although the logical place to reenable h/w watches | |
1673 | is here, we cannot. We cannot reenable them before stepping | |
1674 | the thread (this causes the next wait on the thread to hang). | |
1675 | ||
1676 | Nor can we enable them after stepping until we've done a wait. | |
cd0fc7c3 | 1677 | Thus, we simply set the flag ecs->enable_hw_watchpoints_after_wait |
c906108c SS |
1678 | here, which will be serviced immediately after the target |
1679 | is waited on. */ | |
c5aa993b JM |
1680 | case TARGET_WAITKIND_SYSCALL_RETURN: |
1681 | target_resume (ecs->pid, 1, TARGET_SIGNAL_0); | |
c906108c | 1682 | |
c5aa993b JM |
1683 | if (number_of_threads_in_syscalls > 0) |
1684 | { | |
1685 | number_of_threads_in_syscalls--; | |
1686 | ecs->enable_hw_watchpoints_after_wait = | |
1687 | (number_of_threads_in_syscalls == 0); | |
1688 | } | |
1689 | goto wfi_continue; | |
c906108c | 1690 | |
c5aa993b JM |
1691 | case TARGET_WAITKIND_STOPPED: |
1692 | stop_signal = ecs->ws.value.sig; | |
1693 | break; | |
1694 | } | |
c906108c | 1695 | |
c5aa993b JM |
1696 | /* We may want to consider not doing a resume here in order to give |
1697 | the user a chance to play with the new thread. It might be good | |
1698 | to make that a user-settable option. */ | |
c906108c | 1699 | |
c5aa993b JM |
1700 | /* At this point, all threads are stopped (happens automatically in |
1701 | either the OS or the native code). Therefore we need to continue | |
1702 | all threads in order to make progress. */ | |
1703 | if (ecs->new_thread_event) | |
1704 | { | |
1705 | target_resume (-1, 0, TARGET_SIGNAL_0); | |
1706 | goto wfi_continue; | |
1707 | } | |
c906108c | 1708 | |
c5aa993b | 1709 | stop_pc = read_pc_pid (ecs->pid); |
c906108c | 1710 | |
c5aa993b JM |
1711 | /* See if a thread hit a thread-specific breakpoint that was meant for |
1712 | another thread. If so, then step that thread past the breakpoint, | |
1713 | and continue it. */ | |
c906108c | 1714 | |
c5aa993b JM |
1715 | if (stop_signal == TARGET_SIGNAL_TRAP) |
1716 | { | |
1717 | if (SOFTWARE_SINGLE_STEP_P && singlestep_breakpoints_inserted_p) | |
1718 | ecs->random_signal = 0; | |
1719 | else if (breakpoints_inserted | |
1720 | && breakpoint_here_p (stop_pc - DECR_PC_AFTER_BREAK)) | |
1721 | { | |
cd0fc7c3 | 1722 | ecs->random_signal = 0; |
c5aa993b JM |
1723 | if (!breakpoint_thread_match (stop_pc - DECR_PC_AFTER_BREAK, |
1724 | ecs->pid)) | |
1725 | { | |
1726 | int remove_status; | |
1727 | ||
1728 | /* Saw a breakpoint, but it was hit by the wrong thread. | |
1729 | Just continue. */ | |
1730 | write_pc_pid (stop_pc - DECR_PC_AFTER_BREAK, ecs->pid); | |
1731 | ||
1732 | remove_status = remove_breakpoints (); | |
1733 | /* Did we fail to remove breakpoints? If so, try | |
1734 | to set the PC past the bp. (There's at least | |
1735 | one situation in which we can fail to remove | |
1736 | the bp's: On HP-UX's that use ttrace, we can't | |
1737 | change the address space of a vforking child | |
1738 | process until the child exits (well, okay, not | |
1739 | then either :-) or execs. */ | |
1740 | if (remove_status != 0) | |
1741 | { | |
1742 | write_pc_pid (stop_pc - DECR_PC_AFTER_BREAK + 4, ecs->pid); | |
1743 | } | |
1744 | else | |
1745 | { /* Single step */ | |
1746 | target_resume (ecs->pid, 1, TARGET_SIGNAL_0); | |
1747 | /* FIXME: What if a signal arrives instead of the | |
1748 | single-step happening? */ | |
1749 | ||
1750 | ecs->waiton_pid = ecs->pid; | |
1751 | ecs->wp = &(ecs->ws); | |
1752 | ecs->infwait_state = infwait_thread_hop_state; | |
cd0fc7c3 | 1753 | goto wfi_continue; |
c5aa993b | 1754 | } |
c906108c | 1755 | |
c5aa993b JM |
1756 | /* We need to restart all the threads now, |
1757 | * unles we're running in scheduler-locked mode. | |
1758 | * FIXME: shouldn't we look at currently_stepping ()? | |
1759 | */ | |
1760 | if (scheduler_mode == schedlock_on) | |
1761 | target_resume (ecs->pid, 0, TARGET_SIGNAL_0); | |
1762 | else | |
1763 | target_resume (-1, 0, TARGET_SIGNAL_0); | |
1764 | goto wfi_continue; | |
1765 | } | |
1766 | else | |
1767 | { | |
1768 | /* This breakpoint matches--either it is the right | |
1769 | thread or it's a generic breakpoint for all threads. | |
1770 | Remember that we'll need to step just _this_ thread | |
1771 | on any following user continuation! */ | |
1772 | thread_step_needed = 1; | |
1773 | } | |
1774 | } | |
1775 | } | |
1776 | else | |
1777 | ecs->random_signal = 1; | |
1778 | ||
1779 | /* See if something interesting happened to the non-current thread. If | |
1780 | so, then switch to that thread, and eventually give control back to | |
1781 | the user. | |
1782 | ||
1783 | Note that if there's any kind of pending follow (i.e., of a fork, | |
1784 | vfork or exec), we don't want to do this now. Rather, we'll let | |
1785 | the next resume handle it. */ | |
1786 | if ((ecs->pid != inferior_pid) && | |
1787 | (pending_follow.kind == TARGET_WAITKIND_SPURIOUS)) | |
1788 | { | |
1789 | int printed = 0; | |
c906108c | 1790 | |
c5aa993b JM |
1791 | /* If it's a random signal for a non-current thread, notify user |
1792 | if he's expressed an interest. */ | |
1793 | if (ecs->random_signal | |
1794 | && signal_print[stop_signal]) | |
1795 | { | |
c906108c SS |
1796 | /* ??rehrauer: I don't understand the rationale for this code. If the |
1797 | inferior will stop as a result of this signal, then the act of handling | |
1798 | the stop ought to print a message that's couches the stoppage in user | |
1799 | terms, e.g., "Stopped for breakpoint/watchpoint". If the inferior | |
1800 | won't stop as a result of the signal -- i.e., if the signal is merely | |
1801 | a side-effect of something GDB's doing "under the covers" for the | |
1802 | user, such as stepping threads over a breakpoint they shouldn't stop | |
1803 | for -- then the message seems to be a serious annoyance at best. | |
1804 | ||
1805 | For now, remove the message altogether. */ | |
1806 | #if 0 | |
c5aa993b JM |
1807 | printed = 1; |
1808 | target_terminal_ours_for_output (); | |
1809 | printf_filtered ("\nProgram received signal %s, %s.\n", | |
1810 | target_signal_to_name (stop_signal), | |
1811 | target_signal_to_string (stop_signal)); | |
1812 | gdb_flush (gdb_stdout); | |
c906108c | 1813 | #endif |
c5aa993b | 1814 | } |
c906108c | 1815 | |
c5aa993b JM |
1816 | /* If it's not SIGTRAP and not a signal we want to stop for, then |
1817 | continue the thread. */ | |
c906108c | 1818 | |
c5aa993b JM |
1819 | if (stop_signal != TARGET_SIGNAL_TRAP |
1820 | && !signal_stop[stop_signal]) | |
1821 | { | |
1822 | if (printed) | |
1823 | target_terminal_inferior (); | |
c906108c | 1824 | |
c5aa993b JM |
1825 | /* Clear the signal if it should not be passed. */ |
1826 | if (signal_program[stop_signal] == 0) | |
1827 | stop_signal = TARGET_SIGNAL_0; | |
c906108c | 1828 | |
c5aa993b JM |
1829 | target_resume (ecs->pid, 0, stop_signal); |
1830 | goto wfi_continue; | |
1831 | } | |
c906108c | 1832 | |
c5aa993b JM |
1833 | /* It's a SIGTRAP or a signal we're interested in. Switch threads, |
1834 | and fall into the rest of wait_for_inferior(). */ | |
1835 | ||
1836 | /* Save infrun state for the old thread. */ | |
1837 | save_infrun_state (inferior_pid, prev_pc, | |
1838 | prev_func_start, prev_func_name, | |
1839 | trap_expected, step_resume_breakpoint, | |
1840 | through_sigtramp_breakpoint, | |
1841 | step_range_start, step_range_end, | |
1842 | step_frame_address, ecs->handling_longjmp, | |
1843 | ecs->another_trap, | |
1844 | ecs->stepping_through_solib_after_catch, | |
1845 | ecs->stepping_through_solib_catchpoints, | |
1846 | ecs->stepping_through_sigtramp); | |
1847 | ||
1848 | if (may_switch_from_inferior_pid) | |
1849 | switched_from_inferior_pid = inferior_pid; | |
1850 | ||
1851 | inferior_pid = ecs->pid; | |
1852 | ||
1853 | /* Load infrun state for the new thread. */ | |
1854 | load_infrun_state (inferior_pid, &prev_pc, | |
1855 | &prev_func_start, &prev_func_name, | |
1856 | &trap_expected, &step_resume_breakpoint, | |
1857 | &through_sigtramp_breakpoint, | |
1858 | &step_range_start, &step_range_end, | |
1859 | &step_frame_address, &ecs->handling_longjmp, | |
1860 | &ecs->another_trap, | |
1861 | &ecs->stepping_through_solib_after_catch, | |
1862 | &ecs->stepping_through_solib_catchpoints, | |
1863 | &ecs->stepping_through_sigtramp); | |
1864 | ||
1865 | if (context_hook) | |
1866 | context_hook (pid_to_thread_id (ecs->pid)); | |
1867 | ||
1868 | printf_filtered ("[Switching to %s]\n", target_pid_to_str (ecs->pid)); | |
1869 | flush_cached_frames (); | |
1870 | } | |
c906108c | 1871 | |
c5aa993b JM |
1872 | if (SOFTWARE_SINGLE_STEP_P && singlestep_breakpoints_inserted_p) |
1873 | { | |
1874 | /* Pull the single step breakpoints out of the target. */ | |
1875 | SOFTWARE_SINGLE_STEP (0, 0); | |
1876 | singlestep_breakpoints_inserted_p = 0; | |
1877 | } | |
c906108c | 1878 | |
c5aa993b JM |
1879 | /* If PC is pointing at a nullified instruction, then step beyond |
1880 | it so that the user won't be confused when GDB appears to be ready | |
1881 | to execute it. */ | |
c906108c | 1882 | |
c5aa993b JM |
1883 | /* if (INSTRUCTION_NULLIFIED && currently_stepping (ecs)) */ |
1884 | if (INSTRUCTION_NULLIFIED) | |
1885 | { | |
1886 | registers_changed (); | |
1887 | target_resume (ecs->pid, 1, TARGET_SIGNAL_0); | |
c906108c | 1888 | |
c5aa993b JM |
1889 | /* We may have received a signal that we want to pass to |
1890 | the inferior; therefore, we must not clobber the waitstatus | |
1891 | in WS. */ | |
c906108c | 1892 | |
c5aa993b JM |
1893 | ecs->infwait_state = infwait_nullified_state; |
1894 | ecs->waiton_pid = ecs->pid; | |
1895 | ecs->wp = &(ecs->tmpstatus); | |
1896 | goto wfi_continue; | |
1897 | } | |
c906108c | 1898 | |
c5aa993b JM |
1899 | /* It may not be necessary to disable the watchpoint to stop over |
1900 | it. For example, the PA can (with some kernel cooperation) | |
1901 | single step over a watchpoint without disabling the watchpoint. */ | |
1902 | if (HAVE_STEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (ecs->ws)) | |
1903 | { | |
1904 | resume (1, 0); | |
1905 | goto wfi_continue; | |
1906 | } | |
c906108c | 1907 | |
c5aa993b JM |
1908 | /* It is far more common to need to disable a watchpoint to step |
1909 | the inferior over it. FIXME. What else might a debug | |
1910 | register or page protection watchpoint scheme need here? */ | |
1911 | if (HAVE_NONSTEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (ecs->ws)) | |
1912 | { | |
1913 | /* At this point, we are stopped at an instruction which has | |
1914 | attempted to write to a piece of memory under control of | |
1915 | a watchpoint. The instruction hasn't actually executed | |
1916 | yet. If we were to evaluate the watchpoint expression | |
1917 | now, we would get the old value, and therefore no change | |
1918 | would seem to have occurred. | |
1919 | ||
1920 | In order to make watchpoints work `right', we really need | |
1921 | to complete the memory write, and then evaluate the | |
1922 | watchpoint expression. The following code does that by | |
1923 | removing the watchpoint (actually, all watchpoints and | |
1924 | breakpoints), single-stepping the target, re-inserting | |
1925 | watchpoints, and then falling through to let normal | |
1926 | single-step processing handle proceed. Since this | |
1927 | includes evaluating watchpoints, things will come to a | |
1928 | stop in the correct manner. */ | |
1929 | ||
1930 | write_pc (stop_pc - DECR_PC_AFTER_BREAK); | |
1931 | ||
1932 | remove_breakpoints (); | |
1933 | registers_changed (); | |
1934 | target_resume (ecs->pid, 1, TARGET_SIGNAL_0); /* Single step */ | |
1935 | ||
1936 | ecs->waiton_pid = ecs->pid; | |
1937 | ecs->wp = &(ecs->ws); | |
1938 | ecs->infwait_state = infwait_nonstep_watch_state; | |
1939 | goto wfi_continue; | |
1940 | } | |
c906108c | 1941 | |
c5aa993b JM |
1942 | /* It may be possible to simply continue after a watchpoint. */ |
1943 | if (HAVE_CONTINUABLE_WATCHPOINT) | |
1944 | STOPPED_BY_WATCHPOINT (ecs->ws); | |
1945 | ||
1946 | ecs->stop_func_start = 0; | |
1947 | ecs->stop_func_end = 0; | |
1948 | ecs->stop_func_name = 0; | |
1949 | /* Don't care about return value; stop_func_start and stop_func_name | |
1950 | will both be 0 if it doesn't work. */ | |
1951 | find_pc_partial_function (stop_pc, &ecs->stop_func_name, | |
1952 | &ecs->stop_func_start, &ecs->stop_func_end); | |
1953 | ecs->stop_func_start += FUNCTION_START_OFFSET; | |
1954 | ecs->another_trap = 0; | |
1955 | bpstat_clear (&stop_bpstat); | |
1956 | stop_step = 0; | |
1957 | stop_stack_dummy = 0; | |
1958 | stop_print_frame = 1; | |
1959 | ecs->random_signal = 0; | |
1960 | stopped_by_random_signal = 0; | |
1961 | breakpoints_failed = 0; | |
1962 | ||
1963 | /* Look at the cause of the stop, and decide what to do. | |
1964 | The alternatives are: | |
1965 | 1) break; to really stop and return to the debugger, | |
1966 | 2) drop through to start up again | |
1967 | (set ecs->another_trap to 1 to single step once) | |
1968 | 3) set ecs->random_signal to 1, and the decision between 1 and 2 | |
1969 | will be made according to the signal handling tables. */ | |
1970 | ||
1971 | /* First, distinguish signals caused by the debugger from signals | |
1972 | that have to do with the program's own actions. | |
1973 | Note that breakpoint insns may cause SIGTRAP or SIGILL | |
1974 | or SIGEMT, depending on the operating system version. | |
1975 | Here we detect when a SIGILL or SIGEMT is really a breakpoint | |
1976 | and change it to SIGTRAP. */ | |
1977 | ||
1978 | if (stop_signal == TARGET_SIGNAL_TRAP | |
1979 | || (breakpoints_inserted && | |
1980 | (stop_signal == TARGET_SIGNAL_ILL | |
1981 | || stop_signal == TARGET_SIGNAL_EMT | |
1982 | )) | |
1983 | || stop_soon_quietly) | |
1984 | { | |
1985 | if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap) | |
1986 | { | |
1987 | stop_print_frame = 0; | |
cd0fc7c3 | 1988 | goto wfi_break; |
c5aa993b JM |
1989 | } |
1990 | if (stop_soon_quietly) | |
1991 | goto wfi_break; | |
c906108c | 1992 | |
c5aa993b JM |
1993 | /* Don't even think about breakpoints |
1994 | if just proceeded over a breakpoint. | |
c906108c | 1995 | |
c5aa993b JM |
1996 | However, if we are trying to proceed over a breakpoint |
1997 | and end up in sigtramp, then through_sigtramp_breakpoint | |
1998 | will be set and we should check whether we've hit the | |
1999 | step breakpoint. */ | |
2000 | if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected | |
2001 | && through_sigtramp_breakpoint == NULL) | |
2002 | bpstat_clear (&stop_bpstat); | |
2003 | else | |
2004 | { | |
2005 | /* See if there is a breakpoint at the current PC. */ | |
2006 | stop_bpstat = bpstat_stop_status | |
2007 | (&stop_pc, | |
2008 | (DECR_PC_AFTER_BREAK ? | |
2009 | /* Notice the case of stepping through a jump | |
2010 | that lands just after a breakpoint. | |
2011 | Don't confuse that with hitting the breakpoint. | |
2012 | What we check for is that 1) stepping is going on | |
2013 | and 2) the pc before the last insn does not match | |
2014 | the address of the breakpoint before the current pc | |
2015 | and 3) we didn't hit a breakpoint in a signal handler | |
2016 | without an intervening stop in sigtramp, which is | |
2017 | detected by a new stack pointer value below | |
2018 | any usual function calling stack adjustments. */ | |
2019 | (currently_stepping (ecs) | |
2020 | && prev_pc != stop_pc - DECR_PC_AFTER_BREAK | |
2021 | && !(step_range_end | |
2022 | && INNER_THAN (read_sp (), (step_sp - 16)))) : | |
2023 | 0) | |
2024 | ); | |
2025 | /* Following in case break condition called a | |
2026 | function. */ | |
2027 | stop_print_frame = 1; | |
2028 | } | |
c906108c | 2029 | |
c5aa993b JM |
2030 | if (stop_signal == TARGET_SIGNAL_TRAP) |
2031 | ecs->random_signal | |
2032 | = !(bpstat_explains_signal (stop_bpstat) | |
2033 | || trap_expected | |
2034 | || (!CALL_DUMMY_BREAKPOINT_OFFSET_P | |
2035 | && PC_IN_CALL_DUMMY (stop_pc, read_sp (), | |
2036 | FRAME_FP (get_current_frame ()))) | |
2037 | || (step_range_end && step_resume_breakpoint == NULL)); | |
2038 | ||
2039 | else | |
2040 | { | |
cd0fc7c3 | 2041 | ecs->random_signal |
c906108c | 2042 | = !(bpstat_explains_signal (stop_bpstat) |
c5aa993b JM |
2043 | /* End of a stack dummy. Some systems (e.g. Sony |
2044 | news) give another signal besides SIGTRAP, so | |
2045 | check here as well as above. */ | |
7a292a7a SS |
2046 | || (!CALL_DUMMY_BREAKPOINT_OFFSET_P |
2047 | && PC_IN_CALL_DUMMY (stop_pc, read_sp (), | |
2048 | FRAME_FP (get_current_frame ()))) | |
c5aa993b JM |
2049 | ); |
2050 | if (!ecs->random_signal) | |
2051 | stop_signal = TARGET_SIGNAL_TRAP; | |
2052 | } | |
2053 | } | |
c906108c | 2054 | |
c5aa993b JM |
2055 | /* When we reach this point, we've pretty much decided |
2056 | that the reason for stopping must've been a random | |
2057 | (unexpected) signal. */ | |
2058 | ||
2059 | else | |
2060 | ecs->random_signal = 1; | |
2061 | /* If a fork, vfork or exec event was seen, then there are two | |
2062 | possible responses we can make: | |
2063 | ||
2064 | 1. If a catchpoint triggers for the event (ecs->random_signal == 0), | |
2065 | then we must stop now and issue a prompt. We will resume | |
2066 | the inferior when the user tells us to. | |
2067 | 2. If no catchpoint triggers for the event (ecs->random_signal == 1), | |
2068 | then we must resume the inferior now and keep checking. | |
2069 | ||
2070 | In either case, we must take appropriate steps to "follow" the | |
2071 | the fork/vfork/exec when the inferior is resumed. For example, | |
2072 | if follow-fork-mode is "child", then we must detach from the | |
2073 | parent inferior and follow the new child inferior. | |
2074 | ||
2075 | In either case, setting pending_follow causes the next resume() | |
2076 | to take the appropriate following action. */ | |
2077 | process_event_stop_test: | |
2078 | if (ecs->ws.kind == TARGET_WAITKIND_FORKED) | |
2079 | { | |
2080 | if (ecs->random_signal) /* I.e., no catchpoint triggered for this. */ | |
2081 | { | |
2082 | trap_expected = 1; | |
2083 | stop_signal = TARGET_SIGNAL_0; | |
2084 | goto keep_going; | |
2085 | } | |
2086 | } | |
2087 | else if (ecs->ws.kind == TARGET_WAITKIND_VFORKED) | |
2088 | { | |
2089 | if (ecs->random_signal) /* I.e., no catchpoint triggered for this. */ | |
2090 | { | |
2091 | stop_signal = TARGET_SIGNAL_0; | |
2092 | goto keep_going; | |
2093 | } | |
2094 | } | |
2095 | else if (ecs->ws.kind == TARGET_WAITKIND_EXECD) | |
2096 | { | |
2097 | pending_follow.kind = ecs->ws.kind; | |
2098 | if (ecs->random_signal) /* I.e., no catchpoint triggered for this. */ | |
2099 | { | |
2100 | trap_expected = 1; | |
2101 | stop_signal = TARGET_SIGNAL_0; | |
2102 | goto keep_going; | |
2103 | } | |
2104 | } | |
c906108c | 2105 | |
c5aa993b JM |
2106 | /* For the program's own signals, act according to |
2107 | the signal handling tables. */ | |
c906108c | 2108 | |
c5aa993b JM |
2109 | if (ecs->random_signal) |
2110 | { | |
2111 | /* Signal not for debugging purposes. */ | |
2112 | int printed = 0; | |
2113 | ||
2114 | stopped_by_random_signal = 1; | |
2115 | ||
2116 | if (signal_print[stop_signal]) | |
2117 | { | |
2118 | printed = 1; | |
2119 | target_terminal_ours_for_output (); | |
2120 | annotate_signal (); | |
2121 | printf_filtered ("\nProgram received signal "); | |
2122 | annotate_signal_name (); | |
2123 | printf_filtered ("%s", target_signal_to_name (stop_signal)); | |
2124 | annotate_signal_name_end (); | |
2125 | printf_filtered (", "); | |
2126 | annotate_signal_string (); | |
2127 | printf_filtered ("%s", target_signal_to_string (stop_signal)); | |
2128 | annotate_signal_string_end (); | |
2129 | printf_filtered (".\n"); | |
2130 | gdb_flush (gdb_stdout); | |
2131 | } | |
2132 | if (signal_stop[stop_signal]) | |
2133 | goto wfi_break; | |
2134 | /* If not going to stop, give terminal back | |
2135 | if we took it away. */ | |
2136 | else if (printed) | |
2137 | target_terminal_inferior (); | |
2138 | ||
2139 | /* Clear the signal if it should not be passed. */ | |
2140 | if (signal_program[stop_signal] == 0) | |
2141 | stop_signal = TARGET_SIGNAL_0; | |
2142 | ||
a0b3c4fd JM |
2143 | /* I'm not sure whether this needs to be check_sigtramp2 or |
2144 | whether it could/should be keep_going. | |
2145 | ||
2146 | This used to jump to step_over_function if we are stepping, | |
2147 | which is wrong. | |
2148 | ||
2149 | Suppose the user does a `next' over a function call, and while | |
2150 | that call is in progress, the inferior receives a signal for | |
2151 | which GDB does not stop (i.e., signal_stop[SIG] is false). In | |
2152 | that case, when we reach this point, there is already a | |
2153 | step-resume breakpoint established, right where it should be: | |
2154 | immediately after the function call the user is "next"-ing | |
2155 | over. If we jump to step_over_function now, two bad things | |
2156 | happen: | |
2157 | ||
2158 | - we'll create a new breakpoint, at wherever the current | |
2159 | frame's return address happens to be. That could be | |
2160 | anywhere, depending on what function call happens to be on | |
2161 | the top of the stack at that point. Point is, it's probably | |
2162 | not where we need it. | |
2163 | ||
2164 | - the existing step-resume breakpoint (which is at the correct | |
2165 | address) will get orphaned: step_resume_breakpoint will point | |
2166 | to the new breakpoint, and the old step-resume breakpoint | |
2167 | will never be cleaned up. | |
2168 | ||
2169 | The old behavior was meant to help HP-UX single-step out of | |
2170 | sigtramps. It would place the new breakpoint at prev_pc, which | |
2171 | was certainly wrong. I don't know the details there, so fixing | |
2172 | this probably breaks that. As with anything else, it's up to | |
2173 | the HP-UX maintainer to furnish a fix that doesn't break other | |
2174 | platforms. --JimB, 20 May 1999 */ | |
2175 | goto check_sigtramp2; | |
c5aa993b JM |
2176 | } |
2177 | ||
2178 | /* Handle cases caused by hitting a breakpoint. */ | |
2179 | { | |
2180 | CORE_ADDR jmp_buf_pc; | |
2181 | struct bpstat_what what; | |
2182 | ||
2183 | what = bpstat_what (stop_bpstat); | |
2184 | ||
2185 | if (what.call_dummy) | |
c906108c | 2186 | { |
c5aa993b JM |
2187 | stop_stack_dummy = 1; |
2188 | #ifdef HP_OS_BUG | |
2189 | trap_expected_after_continue = 1; | |
2190 | #endif | |
c906108c | 2191 | } |
c5aa993b JM |
2192 | |
2193 | switch (what.main_action) | |
c906108c | 2194 | { |
c5aa993b JM |
2195 | case BPSTAT_WHAT_SET_LONGJMP_RESUME: |
2196 | /* If we hit the breakpoint at longjmp, disable it for the | |
2197 | duration of this command. Then, install a temporary | |
2198 | breakpoint at the target of the jmp_buf. */ | |
2199 | disable_longjmp_breakpoint (); | |
2200 | remove_breakpoints (); | |
2201 | breakpoints_inserted = 0; | |
2202 | if (!GET_LONGJMP_TARGET (&jmp_buf_pc)) | |
2203 | goto keep_going; | |
2204 | ||
2205 | /* Need to blow away step-resume breakpoint, as it | |
2206 | interferes with us */ | |
2207 | if (step_resume_breakpoint != NULL) | |
c906108c | 2208 | { |
c5aa993b JM |
2209 | delete_breakpoint (step_resume_breakpoint); |
2210 | step_resume_breakpoint = NULL; | |
c906108c | 2211 | } |
c5aa993b JM |
2212 | /* Not sure whether we need to blow this away too, but probably |
2213 | it is like the step-resume breakpoint. */ | |
2214 | if (through_sigtramp_breakpoint != NULL) | |
c906108c | 2215 | { |
c5aa993b JM |
2216 | delete_breakpoint (through_sigtramp_breakpoint); |
2217 | through_sigtramp_breakpoint = NULL; | |
c906108c | 2218 | } |
c906108c | 2219 | |
c5aa993b JM |
2220 | #if 0 |
2221 | /* FIXME - Need to implement nested temporary breakpoints */ | |
2222 | if (step_over_calls > 0) | |
2223 | set_longjmp_resume_breakpoint (jmp_buf_pc, | |
2224 | get_current_frame ()); | |
2225 | else | |
2226 | #endif /* 0 */ | |
2227 | set_longjmp_resume_breakpoint (jmp_buf_pc, NULL); | |
2228 | ecs->handling_longjmp = 1; /* FIXME */ | |
2229 | goto keep_going; | |
c906108c | 2230 | |
c5aa993b JM |
2231 | case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME: |
2232 | case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE: | |
2233 | remove_breakpoints (); | |
2234 | breakpoints_inserted = 0; | |
2235 | #if 0 | |
2236 | /* FIXME - Need to implement nested temporary breakpoints */ | |
2237 | if (step_over_calls | |
2238 | && (INNER_THAN (FRAME_FP (get_current_frame ()), | |
2239 | step_frame_address))) | |
2240 | { | |
2241 | ecs->another_trap = 1; | |
2242 | goto keep_going; | |
2243 | } | |
2244 | #endif /* 0 */ | |
2245 | disable_longjmp_breakpoint (); | |
2246 | ecs->handling_longjmp = 0; /* FIXME */ | |
2247 | if (what.main_action == BPSTAT_WHAT_CLEAR_LONGJMP_RESUME) | |
2248 | break; | |
2249 | /* else fallthrough */ | |
c906108c | 2250 | |
c5aa993b JM |
2251 | case BPSTAT_WHAT_SINGLE: |
2252 | if (breakpoints_inserted) | |
c906108c | 2253 | { |
c5aa993b JM |
2254 | thread_step_needed = 1; |
2255 | remove_breakpoints (); | |
c906108c | 2256 | } |
c5aa993b JM |
2257 | breakpoints_inserted = 0; |
2258 | ecs->another_trap = 1; | |
2259 | /* Still need to check other stuff, at least the case | |
2260 | where we are stepping and step out of the right range. */ | |
2261 | break; | |
c906108c | 2262 | |
c5aa993b JM |
2263 | case BPSTAT_WHAT_STOP_NOISY: |
2264 | stop_print_frame = 1; | |
c906108c | 2265 | |
c5aa993b JM |
2266 | /* We are about to nuke the step_resume_breakpoint and |
2267 | through_sigtramp_breakpoint via the cleanup chain, so | |
2268 | no need to worry about it here. */ | |
c906108c | 2269 | |
c5aa993b | 2270 | goto stop_stepping; |
c906108c | 2271 | |
c5aa993b JM |
2272 | case BPSTAT_WHAT_STOP_SILENT: |
2273 | stop_print_frame = 0; | |
c906108c | 2274 | |
c5aa993b JM |
2275 | /* We are about to nuke the step_resume_breakpoint and |
2276 | through_sigtramp_breakpoint via the cleanup chain, so | |
2277 | no need to worry about it here. */ | |
c906108c | 2278 | |
c5aa993b | 2279 | goto stop_stepping; |
c906108c | 2280 | |
c5aa993b JM |
2281 | case BPSTAT_WHAT_STEP_RESUME: |
2282 | /* This proably demands a more elegant solution, but, yeah | |
2283 | right... | |
2284 | ||
2285 | This function's use of the simple variable | |
2286 | step_resume_breakpoint doesn't seem to accomodate | |
2287 | simultaneously active step-resume bp's, although the | |
2288 | breakpoint list certainly can. | |
2289 | ||
2290 | If we reach here and step_resume_breakpoint is already | |
2291 | NULL, then apparently we have multiple active | |
2292 | step-resume bp's. We'll just delete the breakpoint we | |
53a5351d JM |
2293 | stopped at, and carry on. |
2294 | ||
2295 | Correction: what the code currently does is delete a | |
2296 | step-resume bp, but it makes no effort to ensure that | |
2297 | the one deleted is the one currently stopped at. MVS */ | |
2298 | ||
c5aa993b JM |
2299 | if (step_resume_breakpoint == NULL) |
2300 | { | |
2301 | step_resume_breakpoint = | |
2302 | bpstat_find_step_resume_breakpoint (stop_bpstat); | |
2303 | } | |
2304 | delete_breakpoint (step_resume_breakpoint); | |
2305 | step_resume_breakpoint = NULL; | |
2306 | break; | |
2307 | ||
2308 | case BPSTAT_WHAT_THROUGH_SIGTRAMP: | |
2309 | if (through_sigtramp_breakpoint) | |
2310 | delete_breakpoint (through_sigtramp_breakpoint); | |
2311 | through_sigtramp_breakpoint = NULL; | |
2312 | ||
2313 | /* If were waiting for a trap, hitting the step_resume_break | |
2314 | doesn't count as getting it. */ | |
2315 | if (trap_expected) | |
2316 | ecs->another_trap = 1; | |
2317 | break; | |
c906108c | 2318 | |
c5aa993b JM |
2319 | case BPSTAT_WHAT_CHECK_SHLIBS: |
2320 | case BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK: | |
2321 | #ifdef SOLIB_ADD | |
c906108c | 2322 | { |
c5aa993b JM |
2323 | /* Remove breakpoints, we eventually want to step over the |
2324 | shlib event breakpoint, and SOLIB_ADD might adjust | |
2325 | breakpoint addresses via breakpoint_re_set. */ | |
2326 | if (breakpoints_inserted) | |
2327 | remove_breakpoints (); | |
c906108c | 2328 | breakpoints_inserted = 0; |
c906108c | 2329 | |
c5aa993b JM |
2330 | /* Check for any newly added shared libraries if we're |
2331 | supposed to be adding them automatically. */ | |
2332 | if (auto_solib_add) | |
c906108c | 2333 | { |
c5aa993b JM |
2334 | /* Switch terminal for any messages produced by |
2335 | breakpoint_re_set. */ | |
2336 | target_terminal_ours_for_output (); | |
2337 | SOLIB_ADD (NULL, 0, NULL); | |
2338 | target_terminal_inferior (); | |
c906108c | 2339 | } |
c5aa993b JM |
2340 | |
2341 | /* Try to reenable shared library breakpoints, additional | |
2342 | code segments in shared libraries might be mapped in now. */ | |
2343 | re_enable_breakpoints_in_shlibs (); | |
2344 | ||
2345 | /* If requested, stop when the dynamic linker notifies | |
2346 | gdb of events. This allows the user to get control | |
2347 | and place breakpoints in initializer routines for | |
2348 | dynamically loaded objects (among other things). */ | |
2349 | if (stop_on_solib_events) | |
c906108c | 2350 | { |
c5aa993b JM |
2351 | stop_print_frame = 0; |
2352 | goto stop_stepping; | |
c906108c SS |
2353 | } |
2354 | ||
c5aa993b JM |
2355 | /* If we stopped due to an explicit catchpoint, then the |
2356 | (see above) call to SOLIB_ADD pulled in any symbols | |
2357 | from a newly-loaded library, if appropriate. | |
2358 | ||
2359 | We do want the inferior to stop, but not where it is | |
2360 | now, which is in the dynamic linker callback. Rather, | |
2361 | we would like it stop in the user's program, just after | |
2362 | the call that caused this catchpoint to trigger. That | |
2363 | gives the user a more useful vantage from which to | |
2364 | examine their program's state. */ | |
2365 | else if (what.main_action == BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK) | |
2366 | { | |
2367 | /* ??rehrauer: If I could figure out how to get the | |
2368 | right return PC from here, we could just set a temp | |
2369 | breakpoint and resume. I'm not sure we can without | |
2370 | cracking open the dld's shared libraries and sniffing | |
2371 | their unwind tables and text/data ranges, and that's | |
2372 | not a terribly portable notion. | |
2373 | ||
2374 | Until that time, we must step the inferior out of the | |
2375 | dld callback, and also out of the dld itself (and any | |
2376 | code or stubs in libdld.sl, such as "shl_load" and | |
2377 | friends) until we reach non-dld code. At that point, | |
2378 | we can stop stepping. */ | |
2379 | bpstat_get_triggered_catchpoints (stop_bpstat, | |
2380 | &ecs->stepping_through_solib_catchpoints); | |
2381 | ecs->stepping_through_solib_after_catch = 1; | |
2382 | ||
2383 | /* Be sure to lift all breakpoints, so the inferior does | |
2384 | actually step past this point... */ | |
2385 | ecs->another_trap = 1; | |
2386 | break; | |
2387 | } | |
2388 | else | |
c906108c | 2389 | { |
c5aa993b | 2390 | /* We want to step over this breakpoint, then keep going. */ |
cd0fc7c3 | 2391 | ecs->another_trap = 1; |
c5aa993b | 2392 | break; |
c906108c | 2393 | } |
c5aa993b JM |
2394 | } |
2395 | #endif | |
2396 | break; | |
c906108c | 2397 | |
c5aa993b JM |
2398 | case BPSTAT_WHAT_LAST: |
2399 | /* Not a real code, but listed here to shut up gcc -Wall. */ | |
c906108c | 2400 | |
c5aa993b JM |
2401 | case BPSTAT_WHAT_KEEP_CHECKING: |
2402 | break; | |
2403 | } | |
2404 | } | |
c906108c | 2405 | |
c5aa993b JM |
2406 | /* We come here if we hit a breakpoint but should not |
2407 | stop for it. Possibly we also were stepping | |
2408 | and should stop for that. So fall through and | |
2409 | test for stepping. But, if not stepping, | |
2410 | do not stop. */ | |
c906108c | 2411 | |
c5aa993b JM |
2412 | /* Are we stepping to get the inferior out of the dynamic |
2413 | linker's hook (and possibly the dld itself) after catching | |
2414 | a shlib event? */ | |
2415 | if (ecs->stepping_through_solib_after_catch) | |
2416 | { | |
2417 | #if defined(SOLIB_ADD) | |
2418 | /* Have we reached our destination? If not, keep going. */ | |
2419 | if (SOLIB_IN_DYNAMIC_LINKER (ecs->pid, stop_pc)) | |
2420 | { | |
2421 | ecs->another_trap = 1; | |
2422 | goto keep_going; | |
2423 | } | |
2424 | #endif | |
2425 | /* Else, stop and report the catchpoint(s) whose triggering | |
2426 | caused us to begin stepping. */ | |
2427 | ecs->stepping_through_solib_after_catch = 0; | |
2428 | bpstat_clear (&stop_bpstat); | |
2429 | stop_bpstat = bpstat_copy (ecs->stepping_through_solib_catchpoints); | |
2430 | bpstat_clear (&ecs->stepping_through_solib_catchpoints); | |
2431 | stop_print_frame = 1; | |
2432 | goto stop_stepping; | |
2433 | } | |
c906108c | 2434 | |
c5aa993b JM |
2435 | if (!CALL_DUMMY_BREAKPOINT_OFFSET_P) |
2436 | { | |
2437 | /* This is the old way of detecting the end of the stack dummy. | |
2438 | An architecture which defines CALL_DUMMY_BREAKPOINT_OFFSET gets | |
2439 | handled above. As soon as we can test it on all of them, all | |
2440 | architectures should define it. */ | |
2441 | ||
2442 | /* If this is the breakpoint at the end of a stack dummy, | |
2443 | just stop silently, unless the user was doing an si/ni, in which | |
2444 | case she'd better know what she's doing. */ | |
2445 | ||
2446 | if (CALL_DUMMY_HAS_COMPLETED (stop_pc, read_sp (), | |
2447 | FRAME_FP (get_current_frame ())) | |
2448 | && !step_range_end) | |
2449 | { | |
c906108c | 2450 | stop_print_frame = 0; |
c5aa993b JM |
2451 | stop_stack_dummy = 1; |
2452 | #ifdef HP_OS_BUG | |
2453 | trap_expected_after_continue = 1; | |
2454 | #endif | |
2455 | goto wfi_break; | |
2456 | } | |
2457 | } | |
c906108c | 2458 | |
c5aa993b JM |
2459 | if (step_resume_breakpoint) |
2460 | /* Having a step-resume breakpoint overrides anything | |
2461 | else having to do with stepping commands until | |
2462 | that breakpoint is reached. */ | |
2463 | /* I'm not sure whether this needs to be check_sigtramp2 or | |
2464 | whether it could/should be keep_going. */ | |
2465 | goto check_sigtramp2; | |
2466 | ||
2467 | if (step_range_end == 0) | |
2468 | /* Likewise if we aren't even stepping. */ | |
2469 | /* I'm not sure whether this needs to be check_sigtramp2 or | |
2470 | whether it could/should be keep_going. */ | |
2471 | goto check_sigtramp2; | |
2472 | ||
2473 | /* If stepping through a line, keep going if still within it. | |
2474 | ||
2475 | Note that step_range_end is the address of the first instruction | |
2476 | beyond the step range, and NOT the address of the last instruction | |
2477 | within it! */ | |
2478 | if (stop_pc >= step_range_start | |
2479 | && stop_pc < step_range_end) | |
2480 | { | |
2481 | /* We might be doing a BPSTAT_WHAT_SINGLE and getting a signal. | |
2482 | So definately need to check for sigtramp here. */ | |
2483 | goto check_sigtramp2; | |
2484 | } | |
c906108c | 2485 | |
c5aa993b | 2486 | /* We stepped out of the stepping range. */ |
c906108c | 2487 | |
c5aa993b JM |
2488 | /* If we are stepping at the source level and entered the runtime |
2489 | loader dynamic symbol resolution code, we keep on single stepping | |
2490 | until we exit the run time loader code and reach the callee's | |
2491 | address. */ | |
2492 | if (step_over_calls < 0 && IN_SOLIB_DYNSYM_RESOLVE_CODE (stop_pc)) | |
2493 | goto keep_going; | |
c906108c | 2494 | |
c5aa993b JM |
2495 | /* We can't update step_sp every time through the loop, because |
2496 | reading the stack pointer would slow down stepping too much. | |
2497 | But we can update it every time we leave the step range. */ | |
2498 | ecs->update_step_sp = 1; | |
c906108c | 2499 | |
c5aa993b JM |
2500 | /* Did we just take a signal? */ |
2501 | if (IN_SIGTRAMP (stop_pc, ecs->stop_func_name) | |
2502 | && !IN_SIGTRAMP (prev_pc, prev_func_name) | |
2503 | && INNER_THAN (read_sp (), step_sp)) | |
2504 | { | |
2505 | /* We've just taken a signal; go until we are back to | |
2506 | the point where we took it and one more. */ | |
c906108c | 2507 | |
c5aa993b JM |
2508 | /* Note: The test above succeeds not only when we stepped |
2509 | into a signal handler, but also when we step past the last | |
2510 | statement of a signal handler and end up in the return stub | |
2511 | of the signal handler trampoline. To distinguish between | |
2512 | these two cases, check that the frame is INNER_THAN the | |
2513 | previous one below. pai/1997-09-11 */ | |
c906108c | 2514 | |
c906108c | 2515 | |
c5aa993b JM |
2516 | { |
2517 | CORE_ADDR current_frame = FRAME_FP (get_current_frame ()); | |
c906108c | 2518 | |
c5aa993b JM |
2519 | if (INNER_THAN (current_frame, step_frame_address)) |
2520 | { | |
2521 | /* We have just taken a signal; go until we are back to | |
2522 | the point where we took it and one more. */ | |
c906108c | 2523 | |
c5aa993b JM |
2524 | /* This code is needed at least in the following case: |
2525 | The user types "next" and then a signal arrives (before | |
2526 | the "next" is done). */ | |
c906108c | 2527 | |
c5aa993b JM |
2528 | /* Note that if we are stopped at a breakpoint, then we need |
2529 | the step_resume breakpoint to override any breakpoints at | |
2530 | the same location, so that we will still step over the | |
2531 | breakpoint even though the signal happened. */ | |
2532 | struct symtab_and_line sr_sal; | |
c906108c | 2533 | |
c5aa993b JM |
2534 | INIT_SAL (&sr_sal); |
2535 | sr_sal.symtab = NULL; | |
2536 | sr_sal.line = 0; | |
2537 | sr_sal.pc = prev_pc; | |
2538 | /* We could probably be setting the frame to | |
2539 | step_frame_address; I don't think anyone thought to | |
2540 | try it. */ | |
a0b3c4fd | 2541 | check_for_old_step_resume_breakpoint (); |
c5aa993b JM |
2542 | step_resume_breakpoint = |
2543 | set_momentary_breakpoint (sr_sal, NULL, bp_step_resume); | |
2544 | if (breakpoints_inserted) | |
2545 | insert_breakpoints (); | |
c906108c | 2546 | } |
c5aa993b | 2547 | else |
c906108c | 2548 | { |
c5aa993b JM |
2549 | /* We just stepped out of a signal handler and into |
2550 | its calling trampoline. | |
2551 | ||
2552 | Normally, we'd jump to step_over_function from | |
2553 | here, but for some reason GDB can't unwind the | |
2554 | stack correctly to find the real PC for the point | |
2555 | user code where the signal trampoline will return | |
2556 | -- FRAME_SAVED_PC fails, at least on HP-UX 10.20. | |
2557 | But signal trampolines are pretty small stubs of | |
2558 | code, anyway, so it's OK instead to just | |
2559 | single-step out. Note: assuming such trampolines | |
2560 | don't exhibit recursion on any platform... */ | |
2561 | find_pc_partial_function (stop_pc, &ecs->stop_func_name, | |
2562 | &ecs->stop_func_start, | |
2563 | &ecs->stop_func_end); | |
2564 | /* Readjust stepping range */ | |
2565 | step_range_start = ecs->stop_func_start; | |
2566 | step_range_end = ecs->stop_func_end; | |
2567 | ecs->stepping_through_sigtramp = 1; | |
c906108c | 2568 | } |
c906108c SS |
2569 | } |
2570 | ||
c906108c | 2571 | |
c5aa993b JM |
2572 | /* If this is stepi or nexti, make sure that the stepping range |
2573 | gets us past that instruction. */ | |
2574 | if (step_range_end == 1) | |
2575 | /* FIXME: Does this run afoul of the code below which, if | |
2576 | we step into the middle of a line, resets the stepping | |
2577 | range? */ | |
2578 | step_range_end = (step_range_start = prev_pc) + 1; | |
c906108c | 2579 | |
c5aa993b | 2580 | ecs->remove_breakpoints_on_following_step = 1; |
c906108c | 2581 | goto keep_going; |
c5aa993b | 2582 | } |
c906108c | 2583 | |
c5aa993b JM |
2584 | if (stop_pc == ecs->stop_func_start /* Quick test */ |
2585 | || (in_prologue (stop_pc, ecs->stop_func_start) && | |
2586 | !IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, ecs->stop_func_name)) | |
2587 | || IN_SOLIB_CALL_TRAMPOLINE (stop_pc, ecs->stop_func_name) | |
2588 | || ecs->stop_func_name == 0) | |
2589 | { | |
2590 | /* It's a subroutine call. */ | |
c906108c | 2591 | |
c5aa993b | 2592 | if (step_over_calls == 0) |
c906108c | 2593 | { |
c5aa993b JM |
2594 | /* I presume that step_over_calls is only 0 when we're |
2595 | supposed to be stepping at the assembly language level | |
2596 | ("stepi"). Just stop. */ | |
2597 | stop_step = 1; | |
2598 | goto wfi_break; | |
2599 | } | |
c906108c | 2600 | |
c5aa993b JM |
2601 | if (step_over_calls > 0 || IGNORE_HELPER_CALL (stop_pc)) |
2602 | /* We're doing a "next". */ | |
2603 | goto step_over_function; | |
2604 | ||
2605 | /* If we are in a function call trampoline (a stub between | |
2606 | the calling routine and the real function), locate the real | |
2607 | function. That's what tells us (a) whether we want to step | |
2608 | into it at all, and (b) what prologue we want to run to | |
2609 | the end of, if we do step into it. */ | |
2610 | tmp = SKIP_TRAMPOLINE_CODE (stop_pc); | |
2611 | if (tmp != 0) | |
2612 | ecs->stop_func_start = tmp; | |
2613 | else | |
2614 | { | |
2615 | tmp = DYNAMIC_TRAMPOLINE_NEXTPC (stop_pc); | |
2616 | if (tmp) | |
c906108c | 2617 | { |
c5aa993b JM |
2618 | struct symtab_and_line xxx; |
2619 | /* Why isn't this s_a_l called "sr_sal", like all of the | |
2620 | other s_a_l's where this code is duplicated? */ | |
2621 | INIT_SAL (&xxx); /* initialize to zeroes */ | |
2622 | xxx.pc = tmp; | |
2623 | xxx.section = find_pc_overlay (xxx.pc); | |
a0b3c4fd | 2624 | check_for_old_step_resume_breakpoint (); |
c906108c | 2625 | step_resume_breakpoint = |
c5aa993b JM |
2626 | set_momentary_breakpoint (xxx, NULL, bp_step_resume); |
2627 | insert_breakpoints (); | |
2628 | goto keep_going; | |
c906108c SS |
2629 | } |
2630 | } | |
2631 | ||
c5aa993b JM |
2632 | /* If we have line number information for the function we |
2633 | are thinking of stepping into, step into it. | |
c906108c | 2634 | |
c5aa993b JM |
2635 | If there are several symtabs at that PC (e.g. with include |
2636 | files), just want to know whether *any* of them have line | |
2637 | numbers. find_pc_line handles this. */ | |
2638 | { | |
2639 | struct symtab_and_line tmp_sal; | |
c906108c | 2640 | |
c5aa993b JM |
2641 | tmp_sal = find_pc_line (ecs->stop_func_start, 0); |
2642 | if (tmp_sal.line != 0) | |
2643 | goto step_into_function; | |
c906108c SS |
2644 | } |
2645 | ||
c5aa993b JM |
2646 | step_over_function: |
2647 | /* A subroutine call has happened. */ | |
c906108c | 2648 | { |
a0b3c4fd JM |
2649 | /* We've just entered a callee, and we wish to resume until it |
2650 | returns to the caller. Setting a step_resume breakpoint on | |
2651 | the return address will catch a return from the callee. | |
2652 | ||
2653 | However, if the callee is recursing, we want to be careful | |
2654 | not to catch returns of those recursive calls, but only of | |
2655 | THIS instance of the call. | |
c906108c | 2656 | |
a0b3c4fd JM |
2657 | To do this, we set the step_resume bp's frame to our current |
2658 | caller's frame (step_frame_address, which is set by the "next" | |
2659 | or "until" command, before execution begins). */ | |
2660 | struct symtab_and_line sr_sal; | |
c5aa993b | 2661 | |
a0b3c4fd JM |
2662 | INIT_SAL (&sr_sal); /* initialize to zeros */ |
2663 | sr_sal.pc = | |
2664 | ADDR_BITS_REMOVE (SAVED_PC_AFTER_CALL (get_current_frame ())); | |
2665 | sr_sal.section = find_pc_overlay (sr_sal.pc); | |
c5aa993b | 2666 | |
a0b3c4fd | 2667 | check_for_old_step_resume_breakpoint (); |
c5aa993b | 2668 | step_resume_breakpoint = |
a0b3c4fd | 2669 | set_momentary_breakpoint (sr_sal, get_current_frame (), |
c5aa993b JM |
2670 | bp_step_resume); |
2671 | ||
a0b3c4fd | 2672 | if (!IN_SOLIB_DYNSYM_RESOLVE_CODE (sr_sal.pc)) |
c5aa993b | 2673 | step_resume_breakpoint->frame = step_frame_address; |
c906108c | 2674 | |
c5aa993b JM |
2675 | if (breakpoints_inserted) |
2676 | insert_breakpoints (); | |
2677 | } | |
2678 | goto keep_going; | |
c906108c | 2679 | |
c5aa993b JM |
2680 | step_into_function: |
2681 | /* Subroutine call with source code we should not step over. | |
2682 | Do step to the first line of code in it. */ | |
2683 | { | |
2684 | struct symtab *s; | |
c906108c | 2685 | |
c5aa993b JM |
2686 | s = find_pc_symtab (stop_pc); |
2687 | if (s && s->language != language_asm) | |
2688 | ecs->stop_func_start = SKIP_PROLOGUE (ecs->stop_func_start); | |
2689 | } | |
2690 | ecs->sal = find_pc_line (ecs->stop_func_start, 0); | |
2691 | /* Use the step_resume_break to step until | |
2692 | the end of the prologue, even if that involves jumps | |
2693 | (as it seems to on the vax under 4.2). */ | |
2694 | /* If the prologue ends in the middle of a source line, | |
2695 | continue to the end of that source line (if it is still | |
2696 | within the function). Otherwise, just go to end of prologue. */ | |
2697 | #ifdef PROLOGUE_FIRSTLINE_OVERLAP | |
2698 | /* no, don't either. It skips any code that's | |
2699 | legitimately on the first line. */ | |
2700 | #else | |
2701 | if (ecs->sal.end && ecs->sal.pc != ecs->stop_func_start && ecs->sal.end < ecs->stop_func_end) | |
2702 | ecs->stop_func_start = ecs->sal.end; | |
2703 | #endif | |
c906108c | 2704 | |
c5aa993b JM |
2705 | if (ecs->stop_func_start == stop_pc) |
2706 | { | |
2707 | /* We are already there: stop now. */ | |
2708 | stop_step = 1; | |
2709 | goto wfi_break; | |
c906108c | 2710 | } |
c5aa993b JM |
2711 | else |
2712 | /* Put the step-breakpoint there and go until there. */ | |
c906108c | 2713 | { |
c906108c SS |
2714 | struct symtab_and_line sr_sal; |
2715 | ||
c5aa993b JM |
2716 | INIT_SAL (&sr_sal); /* initialize to zeroes */ |
2717 | sr_sal.pc = ecs->stop_func_start; | |
2718 | sr_sal.section = find_pc_overlay (ecs->stop_func_start); | |
2719 | /* Do not specify what the fp should be when we stop | |
2720 | since on some machines the prologue | |
2721 | is where the new fp value is established. */ | |
a0b3c4fd | 2722 | check_for_old_step_resume_breakpoint (); |
c906108c | 2723 | step_resume_breakpoint = |
c5aa993b | 2724 | set_momentary_breakpoint (sr_sal, NULL, bp_step_resume); |
c906108c SS |
2725 | if (breakpoints_inserted) |
2726 | insert_breakpoints (); | |
c906108c | 2727 | |
c5aa993b JM |
2728 | /* And make sure stepping stops right away then. */ |
2729 | step_range_end = step_range_start; | |
c906108c | 2730 | } |
c5aa993b JM |
2731 | goto keep_going; |
2732 | } | |
c906108c | 2733 | |
c5aa993b | 2734 | /* We've wandered out of the step range. */ |
c906108c | 2735 | |
c5aa993b | 2736 | ecs->sal = find_pc_line (stop_pc, 0); |
c906108c | 2737 | |
c5aa993b JM |
2738 | if (step_range_end == 1) |
2739 | { | |
2740 | /* It is stepi or nexti. We always want to stop stepping after | |
2741 | one instruction. */ | |
2742 | stop_step = 1; | |
2743 | goto wfi_break; | |
2744 | } | |
c906108c | 2745 | |
c5aa993b JM |
2746 | /* If we're in the return path from a shared library trampoline, |
2747 | we want to proceed through the trampoline when stepping. */ | |
2748 | if (IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, ecs->stop_func_name)) | |
2749 | { | |
2750 | CORE_ADDR tmp; | |
c906108c | 2751 | |
c5aa993b JM |
2752 | /* Determine where this trampoline returns. */ |
2753 | tmp = SKIP_TRAMPOLINE_CODE (stop_pc); | |
c906108c | 2754 | |
c5aa993b JM |
2755 | /* Only proceed through if we know where it's going. */ |
2756 | if (tmp) | |
2757 | { | |
2758 | /* And put the step-breakpoint there and go until there. */ | |
2759 | struct symtab_and_line sr_sal; | |
c906108c | 2760 | |
c5aa993b JM |
2761 | INIT_SAL (&sr_sal); /* initialize to zeroes */ |
2762 | sr_sal.pc = tmp; | |
2763 | sr_sal.section = find_pc_overlay (sr_sal.pc); | |
2764 | /* Do not specify what the fp should be when we stop | |
2765 | since on some machines the prologue | |
2766 | is where the new fp value is established. */ | |
a0b3c4fd | 2767 | check_for_old_step_resume_breakpoint (); |
c5aa993b JM |
2768 | step_resume_breakpoint = |
2769 | set_momentary_breakpoint (sr_sal, NULL, bp_step_resume); | |
2770 | if (breakpoints_inserted) | |
2771 | insert_breakpoints (); | |
c906108c | 2772 | |
c5aa993b JM |
2773 | /* Restart without fiddling with the step ranges or |
2774 | other state. */ | |
2775 | goto keep_going; | |
2776 | } | |
2777 | } | |
c906108c | 2778 | |
c5aa993b | 2779 | if (ecs->sal.line == 0) |
c906108c | 2780 | { |
c5aa993b JM |
2781 | /* We have no line number information. That means to stop |
2782 | stepping (does this always happen right after one instruction, | |
2783 | when we do "s" in a function with no line numbers, | |
2784 | or can this happen as a result of a return or longjmp?). */ | |
2785 | stop_step = 1; | |
2786 | goto wfi_break; | |
c906108c SS |
2787 | } |
2788 | ||
c5aa993b JM |
2789 | if ((stop_pc == ecs->sal.pc) |
2790 | && (ecs->current_line != ecs->sal.line || ecs->current_symtab != ecs->sal.symtab)) | |
2791 | { | |
2792 | /* We are at the start of a different line. So stop. Note that | |
2793 | we don't stop if we step into the middle of a different line. | |
2794 | That is said to make things like for (;;) statements work | |
2795 | better. */ | |
2796 | stop_step = 1; | |
2797 | goto wfi_break; | |
2798 | } | |
c906108c | 2799 | |
c5aa993b | 2800 | /* We aren't done stepping. |
c906108c | 2801 | |
c5aa993b JM |
2802 | Optimize by setting the stepping range to the line. |
2803 | (We might not be in the original line, but if we entered a | |
2804 | new line in mid-statement, we continue stepping. This makes | |
2805 | things like for(;;) statements work better.) */ | |
c906108c | 2806 | |
c5aa993b JM |
2807 | if (ecs->stop_func_end && ecs->sal.end >= ecs->stop_func_end) |
2808 | { | |
2809 | /* If this is the last line of the function, don't keep stepping | |
2810 | (it would probably step us out of the function). | |
2811 | This is particularly necessary for a one-line function, | |
2812 | in which after skipping the prologue we better stop even though | |
2813 | we will be in mid-line. */ | |
2814 | stop_step = 1; | |
2815 | goto wfi_break; | |
2816 | } | |
2817 | step_range_start = ecs->sal.pc; | |
2818 | step_range_end = ecs->sal.end; | |
2819 | step_frame_address = FRAME_FP (get_current_frame ()); | |
2820 | ecs->current_line = ecs->sal.line; | |
2821 | ecs->current_symtab = ecs->sal.symtab; | |
2822 | ||
2823 | /* In the case where we just stepped out of a function into the middle | |
2824 | of a line of the caller, continue stepping, but step_frame_address | |
2825 | must be modified to current frame */ | |
2826 | { | |
2827 | CORE_ADDR current_frame = FRAME_FP (get_current_frame ()); | |
2828 | if (!(INNER_THAN (current_frame, step_frame_address))) | |
2829 | step_frame_address = current_frame; | |
2830 | } | |
c906108c | 2831 | |
c906108c | 2832 | |
c5aa993b | 2833 | goto keep_going; |
c906108c | 2834 | |
c5aa993b JM |
2835 | check_sigtramp2: |
2836 | if (trap_expected | |
2837 | && IN_SIGTRAMP (stop_pc, ecs->stop_func_name) | |
2838 | && !IN_SIGTRAMP (prev_pc, prev_func_name) | |
2839 | && INNER_THAN (read_sp (), step_sp)) | |
2840 | { | |
2841 | /* What has happened here is that we have just stepped the inferior | |
2842 | with a signal (because it is a signal which shouldn't make | |
2843 | us stop), thus stepping into sigtramp. | |
2844 | ||
2845 | So we need to set a step_resume_break_address breakpoint | |
2846 | and continue until we hit it, and then step. FIXME: This should | |
2847 | be more enduring than a step_resume breakpoint; we should know | |
2848 | that we will later need to keep going rather than re-hitting | |
2849 | the breakpoint here (see testsuite/gdb.t06/signals.exp where | |
2850 | it says "exceedingly difficult"). */ | |
2851 | struct symtab_and_line sr_sal; | |
2852 | ||
2853 | INIT_SAL (&sr_sal); /* initialize to zeroes */ | |
2854 | sr_sal.pc = prev_pc; | |
2855 | sr_sal.section = find_pc_overlay (sr_sal.pc); | |
2856 | /* We perhaps could set the frame if we kept track of what | |
2857 | the frame corresponding to prev_pc was. But we don't, | |
2858 | so don't. */ | |
2859 | through_sigtramp_breakpoint = | |
2860 | set_momentary_breakpoint (sr_sal, NULL, bp_through_sigtramp); | |
2861 | if (breakpoints_inserted) | |
2862 | insert_breakpoints (); | |
c906108c | 2863 | |
c5aa993b JM |
2864 | ecs->remove_breakpoints_on_following_step = 1; |
2865 | ecs->another_trap = 1; | |
2866 | } | |
c906108c | 2867 | |
c5aa993b JM |
2868 | keep_going: |
2869 | /* Come to this label when you need to resume the inferior. | |
2870 | It's really much cleaner to do a goto than a maze of if-else | |
2871 | conditions. */ | |
2872 | ||
2873 | /* ??rehrauer: ttrace on HP-UX theoretically allows one to debug | |
2874 | a vforked child beetween its creation and subsequent exit or | |
2875 | call to exec(). However, I had big problems in this rather | |
2876 | creaky exec engine, getting that to work. The fundamental | |
2877 | problem is that I'm trying to debug two processes via an | |
2878 | engine that only understands a single process with possibly | |
2879 | multiple threads. | |
2880 | ||
2881 | Hence, this spot is known to have problems when | |
2882 | target_can_follow_vfork_prior_to_exec returns 1. */ | |
2883 | ||
2884 | /* Save the pc before execution, to compare with pc after stop. */ | |
2885 | prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */ | |
2886 | prev_func_start = ecs->stop_func_start; /* Ok, since if DECR_PC_AFTER | |
2887 | BREAK is defined, the | |
2888 | original pc would not have | |
2889 | been at the start of a | |
2890 | function. */ | |
2891 | prev_func_name = ecs->stop_func_name; | |
2892 | ||
2893 | if (ecs->update_step_sp) | |
2894 | step_sp = read_sp (); | |
2895 | ecs->update_step_sp = 0; | |
2896 | ||
2897 | /* If we did not do break;, it means we should keep | |
2898 | running the inferior and not return to debugger. */ | |
2899 | ||
2900 | if (trap_expected && stop_signal != TARGET_SIGNAL_TRAP) | |
2901 | { | |
2902 | /* We took a signal (which we are supposed to pass through to | |
2903 | the inferior, else we'd have done a break above) and we | |
2904 | haven't yet gotten our trap. Simply continue. */ | |
2905 | resume (currently_stepping (ecs), stop_signal); | |
2906 | } | |
2907 | else | |
2908 | { | |
2909 | /* Either the trap was not expected, but we are continuing | |
2910 | anyway (the user asked that this signal be passed to the | |
2911 | child) | |
2912 | -- or -- | |
2913 | The signal was SIGTRAP, e.g. it was our signal, but we | |
2914 | decided we should resume from it. | |
2915 | ||
2916 | We're going to run this baby now! | |
2917 | ||
2918 | Insert breakpoints now, unless we are trying | |
2919 | to one-proceed past a breakpoint. */ | |
2920 | /* If we've just finished a special step resume and we don't | |
2921 | want to hit a breakpoint, pull em out. */ | |
2922 | if (step_resume_breakpoint == NULL | |
2923 | && through_sigtramp_breakpoint == NULL | |
2924 | && ecs->remove_breakpoints_on_following_step) | |
2925 | { | |
2926 | ecs->remove_breakpoints_on_following_step = 0; | |
2927 | remove_breakpoints (); | |
2928 | breakpoints_inserted = 0; | |
2929 | } | |
2930 | else if (!breakpoints_inserted && | |
2931 | (through_sigtramp_breakpoint != NULL || !ecs->another_trap)) | |
2932 | { | |
2933 | breakpoints_failed = insert_breakpoints (); | |
2934 | if (breakpoints_failed) | |
2935 | goto wfi_break; | |
2936 | breakpoints_inserted = 1; | |
2937 | } | |
c906108c | 2938 | |
c5aa993b | 2939 | trap_expected = ecs->another_trap; |
c906108c | 2940 | |
c5aa993b JM |
2941 | /* Do not deliver SIGNAL_TRAP (except when the user |
2942 | explicitly specifies that such a signal should be | |
2943 | delivered to the target program). | |
c906108c | 2944 | |
c5aa993b JM |
2945 | Typically, this would occure when a user is debugging a |
2946 | target monitor on a simulator: the target monitor sets a | |
2947 | breakpoint; the simulator encounters this break-point and | |
2948 | halts the simulation handing control to GDB; GDB, noteing | |
2949 | that the break-point isn't valid, returns control back to | |
2950 | the simulator; the simulator then delivers the hardware | |
2951 | equivalent of a SIGNAL_TRAP to the program being | |
2952 | debugged. */ | |
c906108c | 2953 | |
c5aa993b JM |
2954 | if (stop_signal == TARGET_SIGNAL_TRAP |
2955 | && !signal_program[stop_signal]) | |
2956 | stop_signal = TARGET_SIGNAL_0; | |
c906108c SS |
2957 | |
2958 | #ifdef SHIFT_INST_REGS | |
c5aa993b JM |
2959 | /* I'm not sure when this following segment applies. I do know, |
2960 | now, that we shouldn't rewrite the regs when we were stopped | |
2961 | by a random signal from the inferior process. */ | |
2962 | /* FIXME: Shouldn't this be based on the valid bit of the SXIP? | |
2963 | (this is only used on the 88k). */ | |
2964 | ||
2965 | if (!bpstat_explains_signal (stop_bpstat) | |
2966 | && (stop_signal != TARGET_SIGNAL_CHLD) | |
2967 | && !stopped_by_random_signal) | |
2968 | SHIFT_INST_REGS (); | |
c906108c SS |
2969 | #endif /* SHIFT_INST_REGS */ |
2970 | ||
c5aa993b JM |
2971 | resume (currently_stepping (ecs), stop_signal); |
2972 | } | |
cd0fc7c3 | 2973 | |
c5aa993b JM |
2974 | /* Former continues in the main loop goto here. */ |
2975 | wfi_continue: | |
2976 | /* This used to be at the top of the loop. */ | |
2977 | if (ecs->infwait_state == infwait_normal_state) | |
2978 | { | |
2979 | overlay_cache_invalid = 1; | |
cd0fc7c3 | 2980 | |
c5aa993b JM |
2981 | /* We have to invalidate the registers BEFORE calling |
2982 | target_wait because they can be loaded from the target | |
2983 | while in target_wait. This makes remote debugging a bit | |
2984 | more efficient for those targets that provide critical | |
2985 | registers as part of their normal status mechanism. */ | |
cd0fc7c3 | 2986 | |
c5aa993b JM |
2987 | registers_changed (); |
2988 | ecs->waiton_pid = -1; | |
2989 | ecs->wp = &(ecs->ws); | |
2990 | } | |
2991 | /* This is the old end of the while loop. Let everybody know | |
2992 | we want to wait for the inferior some more and get called | |
2993 | again soon. */ | |
2994 | ecs->wait_some_more = 1; | |
2995 | return; | |
2996 | } | |
c906108c | 2997 | |
cd0fc7c3 SS |
2998 | /* Former breaks in the main loop goto here. */ |
2999 | wfi_break: | |
3000 | ||
c906108c SS |
3001 | stop_stepping: |
3002 | if (target_has_execution) | |
3003 | { | |
3004 | /* Are we stopping for a vfork event? We only stop when we see | |
3005 | the child's event. However, we may not yet have seen the | |
3006 | parent's event. And, inferior_pid is still set to the parent's | |
3007 | pid, until we resume again and follow either the parent or child. | |
3008 | ||
3009 | To ensure that we can really touch inferior_pid (aka, the | |
3010 | parent process) -- which calls to functions like read_pc | |
3011 | implicitly do -- wait on the parent if necessary. */ | |
3012 | if ((pending_follow.kind == TARGET_WAITKIND_VFORKED) | |
3013 | && !pending_follow.fork_event.saw_parent_fork) | |
3014 | { | |
3015 | int parent_pid; | |
3016 | ||
3017 | do | |
3018 | { | |
3019 | if (target_wait_hook) | |
cd0fc7c3 | 3020 | parent_pid = target_wait_hook (-1, &(ecs->ws)); |
c906108c | 3021 | else |
cd0fc7c3 | 3022 | parent_pid = target_wait (-1, &(ecs->ws)); |
c906108c SS |
3023 | } |
3024 | while (parent_pid != inferior_pid); | |
3025 | } | |
3026 | ||
c906108c | 3027 | /* Assuming the inferior still exists, set these up for next |
c5aa993b JM |
3028 | time, just like we did above if we didn't break out of the |
3029 | loop. */ | |
c906108c | 3030 | prev_pc = read_pc (); |
cd0fc7c3 SS |
3031 | prev_func_start = ecs->stop_func_start; |
3032 | prev_func_name = ecs->stop_func_name; | |
c906108c | 3033 | } |
cd0fc7c3 SS |
3034 | /* Let callers know we don't want to wait for the inferior anymore. */ |
3035 | ecs->wait_some_more = 0; | |
3036 | } | |
3037 | ||
3038 | /* Are we in the middle of stepping? */ | |
3039 | ||
392a587b | 3040 | static int |
96baa820 | 3041 | currently_stepping (struct execution_control_state *ecs) |
cd0fc7c3 SS |
3042 | { |
3043 | return ((through_sigtramp_breakpoint == NULL | |
3044 | && !ecs->handling_longjmp | |
3045 | && ((step_range_end && step_resume_breakpoint == NULL) | |
3046 | || trap_expected)) | |
3047 | || ecs->stepping_through_solib_after_catch | |
3048 | || bpstat_should_step ()); | |
c906108c SS |
3049 | } |
3050 | ||
3051 | /* This function returns TRUE if ep is an internal breakpoint | |
3052 | set to catch generic shared library (aka dynamically-linked | |
3053 | library) events. (This is *NOT* the same as a catchpoint for a | |
3054 | shlib event. The latter is something a user can set; this is | |
3055 | something gdb sets for its own use, and isn't ever shown to a | |
3056 | user.) */ | |
3057 | static int | |
96baa820 | 3058 | is_internal_shlib_eventpoint (struct breakpoint *ep) |
c906108c SS |
3059 | { |
3060 | return | |
3061 | (ep->type == bp_shlib_event) | |
3062 | ; | |
3063 | } | |
3064 | ||
3065 | /* This function returns TRUE if bs indicates that the inferior | |
3066 | stopped due to a shared library (aka dynamically-linked library) | |
3067 | event. */ | |
96baa820 | 3068 | |
c906108c | 3069 | static int |
96baa820 | 3070 | stopped_for_internal_shlib_event (bpstat bs) |
c906108c SS |
3071 | { |
3072 | /* Note that multiple eventpoints may've caused the stop. Any | |
3073 | that are associated with shlib events will be accepted. */ | |
3074 | for (; bs != NULL; bs = bs->next) | |
3075 | { | |
3076 | if ((bs->breakpoint_at != NULL) | |
3077 | && is_internal_shlib_eventpoint (bs->breakpoint_at)) | |
3078 | return 1; | |
3079 | } | |
3080 | ||
3081 | /* If we get here, then no candidate was found. */ | |
3082 | return 0; | |
3083 | } | |
c906108c | 3084 | \f |
43ff13b4 JM |
3085 | /* Reset proper settings after an asynchronous command has finished. |
3086 | If the execution command was in synchronous mode, register stdin | |
3087 | with the event loop, and reset the prompt. */ | |
96baa820 | 3088 | |
43ff13b4 | 3089 | static void |
96baa820 | 3090 | complete_execution (void) |
43ff13b4 | 3091 | { |
96baa820 | 3092 | extern int cleanup_sigint_signal_handler (void); |
43ff13b4 | 3093 | |
adf40b2e | 3094 | target_executing = 0; |
43ff13b4 JM |
3095 | if (sync_execution) |
3096 | { | |
7be570e7 | 3097 | add_file_handler (input_fd, call_readline, 0); |
43ff13b4 JM |
3098 | pop_prompt (); |
3099 | sync_execution = 0; | |
3100 | cleanup_sigint_signal_handler (); | |
3101 | display_gdb_prompt (0); | |
3102 | } | |
43ff13b4 JM |
3103 | } |
3104 | ||
c906108c SS |
3105 | /* Here to return control to GDB when the inferior stops for real. |
3106 | Print appropriate messages, remove breakpoints, give terminal our modes. | |
3107 | ||
3108 | STOP_PRINT_FRAME nonzero means print the executing frame | |
3109 | (pc, function, args, file, line number and line text). | |
3110 | BREAKPOINTS_FAILED nonzero means stop was due to error | |
3111 | attempting to insert breakpoints. */ | |
3112 | ||
3113 | void | |
96baa820 | 3114 | normal_stop (void) |
c906108c | 3115 | { |
c906108c SS |
3116 | /* As with the notification of thread events, we want to delay |
3117 | notifying the user that we've switched thread context until | |
3118 | the inferior actually stops. | |
3119 | ||
3120 | (Note that there's no point in saying anything if the inferior | |
3121 | has exited!) */ | |
7a292a7a SS |
3122 | if (may_switch_from_inferior_pid |
3123 | && (switched_from_inferior_pid != inferior_pid) | |
3124 | && target_has_execution) | |
c906108c SS |
3125 | { |
3126 | target_terminal_ours_for_output (); | |
3127 | printf_filtered ("[Switched to %s]\n", | |
3128 | target_pid_or_tid_to_str (inferior_pid)); | |
3129 | switched_from_inferior_pid = inferior_pid; | |
3130 | } | |
c906108c SS |
3131 | |
3132 | /* Make sure that the current_frame's pc is correct. This | |
3133 | is a correction for setting up the frame info before doing | |
3134 | DECR_PC_AFTER_BREAK */ | |
3135 | if (target_has_execution && get_current_frame ()) | |
3136 | (get_current_frame ())->pc = read_pc (); | |
3137 | ||
3138 | if (breakpoints_failed) | |
3139 | { | |
3140 | target_terminal_ours_for_output (); | |
3141 | print_sys_errmsg ("ptrace", breakpoints_failed); | |
3142 | printf_filtered ("Stopped; cannot insert breakpoints.\n\ | |
3143 | The same program may be running in another process.\n"); | |
3144 | } | |
3145 | ||
3146 | if (target_has_execution && breakpoints_inserted) | |
3147 | { | |
3148 | if (remove_breakpoints ()) | |
3149 | { | |
3150 | target_terminal_ours_for_output (); | |
3151 | printf_filtered ("Cannot remove breakpoints because "); | |
3152 | printf_filtered ("program is no longer writable.\n"); | |
3153 | printf_filtered ("It might be running in another process.\n"); | |
3154 | printf_filtered ("Further execution is probably impossible.\n"); | |
3155 | } | |
3156 | } | |
3157 | breakpoints_inserted = 0; | |
3158 | ||
3159 | /* Delete the breakpoint we stopped at, if it wants to be deleted. | |
3160 | Delete any breakpoint that is to be deleted at the next stop. */ | |
3161 | ||
3162 | breakpoint_auto_delete (stop_bpstat); | |
3163 | ||
3164 | /* If an auto-display called a function and that got a signal, | |
3165 | delete that auto-display to avoid an infinite recursion. */ | |
3166 | ||
3167 | if (stopped_by_random_signal) | |
3168 | disable_current_display (); | |
3169 | ||
3170 | /* Don't print a message if in the middle of doing a "step n" | |
3171 | operation for n > 1 */ | |
3172 | if (step_multi && stop_step) | |
3173 | goto done; | |
3174 | ||
3175 | target_terminal_ours (); | |
3176 | ||
3177 | /* Did we stop because the user set the stop_on_solib_events | |
3178 | variable? (If so, we report this as a generic, "Stopped due | |
3179 | to shlib event" message.) */ | |
3180 | if (stopped_for_internal_shlib_event (stop_bpstat)) | |
3181 | { | |
3182 | printf_filtered ("Stopped due to shared library event\n"); | |
3183 | } | |
3184 | ||
3185 | /* Look up the hook_stop and run it if it exists. */ | |
3186 | ||
3187 | if (stop_command && stop_command->hook) | |
3188 | { | |
3189 | catch_errors (hook_stop_stub, stop_command->hook, | |
3190 | "Error while running hook_stop:\n", RETURN_MASK_ALL); | |
3191 | } | |
3192 | ||
3193 | if (!target_has_stack) | |
3194 | { | |
3195 | ||
3196 | goto done; | |
3197 | } | |
3198 | ||
3199 | /* Select innermost stack frame - i.e., current frame is frame 0, | |
3200 | and current location is based on that. | |
3201 | Don't do this on return from a stack dummy routine, | |
3202 | or if the program has exited. */ | |
3203 | ||
3204 | if (!stop_stack_dummy) | |
3205 | { | |
3206 | select_frame (get_current_frame (), 0); | |
3207 | ||
3208 | /* Print current location without a level number, if | |
c5aa993b JM |
3209 | we have changed functions or hit a breakpoint. |
3210 | Print source line if we have one. | |
3211 | bpstat_print() contains the logic deciding in detail | |
3212 | what to print, based on the event(s) that just occurred. */ | |
c906108c SS |
3213 | |
3214 | if (stop_print_frame) | |
3215 | { | |
3216 | int bpstat_ret; | |
3217 | int source_flag; | |
3218 | ||
3219 | bpstat_ret = bpstat_print (stop_bpstat); | |
3220 | /* bpstat_print() returned one of: | |
c5aa993b JM |
3221 | -1: Didn't print anything |
3222 | 0: Printed preliminary "Breakpoint n, " message, desires | |
3223 | location tacked on | |
3224 | 1: Printed something, don't tack on location */ | |
c906108c SS |
3225 | |
3226 | if (bpstat_ret == -1) | |
3227 | if (stop_step | |
3228 | && step_frame_address == FRAME_FP (get_current_frame ()) | |
3229 | && step_start_function == find_pc_function (stop_pc)) | |
3230 | source_flag = -1; /* finished step, just print source line */ | |
3231 | else | |
3232 | source_flag = 1; /* print location and source line */ | |
3233 | else if (bpstat_ret == 0) /* hit bpt, desire location */ | |
3234 | source_flag = 1; /* print location and source line */ | |
3235 | else /* bpstat_ret == 1, hit bpt, do not desire location */ | |
3236 | source_flag = -1; /* just print source line */ | |
3237 | ||
3238 | /* The behavior of this routine with respect to the source | |
3239 | flag is: | |
3240 | -1: Print only source line | |
3241 | 0: Print only location | |
3242 | 1: Print location and source line */ | |
3243 | show_and_print_stack_frame (selected_frame, -1, source_flag); | |
3244 | ||
3245 | /* Display the auto-display expressions. */ | |
3246 | do_displays (); | |
3247 | } | |
3248 | } | |
3249 | ||
3250 | /* Save the function value return registers, if we care. | |
3251 | We might be about to restore their previous contents. */ | |
3252 | if (proceed_to_finish) | |
3253 | read_register_bytes (0, stop_registers, REGISTER_BYTES); | |
3254 | ||
3255 | if (stop_stack_dummy) | |
3256 | { | |
3257 | /* Pop the empty frame that contains the stack dummy. | |
3258 | POP_FRAME ends with a setting of the current frame, so we | |
c5aa993b | 3259 | can use that next. */ |
c906108c SS |
3260 | POP_FRAME; |
3261 | /* Set stop_pc to what it was before we called the function. | |
c5aa993b JM |
3262 | Can't rely on restore_inferior_status because that only gets |
3263 | called if we don't stop in the called function. */ | |
c906108c SS |
3264 | stop_pc = read_pc (); |
3265 | select_frame (get_current_frame (), 0); | |
3266 | } | |
3267 | ||
3268 | ||
3269 | TUIDO (((TuiOpaqueFuncPtr) tui_vCheckDataValues, selected_frame)); | |
3270 | ||
3271 | done: | |
3272 | annotate_stopped (); | |
3273 | } | |
3274 | ||
3275 | static int | |
96baa820 | 3276 | hook_stop_stub (void *cmd) |
c906108c SS |
3277 | { |
3278 | execute_user_command ((struct cmd_list_element *) cmd, 0); | |
3279 | return (0); | |
3280 | } | |
3281 | \f | |
c5aa993b | 3282 | int |
96baa820 | 3283 | signal_stop_state (int signo) |
c906108c SS |
3284 | { |
3285 | return signal_stop[signo]; | |
3286 | } | |
3287 | ||
c5aa993b | 3288 | int |
96baa820 | 3289 | signal_print_state (int signo) |
c906108c SS |
3290 | { |
3291 | return signal_print[signo]; | |
3292 | } | |
3293 | ||
c5aa993b | 3294 | int |
96baa820 | 3295 | signal_pass_state (int signo) |
c906108c SS |
3296 | { |
3297 | return signal_program[signo]; | |
3298 | } | |
3299 | ||
3300 | static void | |
96baa820 | 3301 | sig_print_header (void) |
c906108c SS |
3302 | { |
3303 | printf_filtered ("\ | |
3304 | Signal Stop\tPrint\tPass to program\tDescription\n"); | |
3305 | } | |
3306 | ||
3307 | static void | |
96baa820 | 3308 | sig_print_info (enum target_signal oursig) |
c906108c SS |
3309 | { |
3310 | char *name = target_signal_to_name (oursig); | |
3311 | int name_padding = 13 - strlen (name); | |
96baa820 | 3312 | |
c906108c SS |
3313 | if (name_padding <= 0) |
3314 | name_padding = 0; | |
3315 | ||
3316 | printf_filtered ("%s", name); | |
3317 | printf_filtered ("%*.*s ", name_padding, name_padding, | |
3318 | " "); | |
3319 | printf_filtered ("%s\t", signal_stop[oursig] ? "Yes" : "No"); | |
3320 | printf_filtered ("%s\t", signal_print[oursig] ? "Yes" : "No"); | |
3321 | printf_filtered ("%s\t\t", signal_program[oursig] ? "Yes" : "No"); | |
3322 | printf_filtered ("%s\n", target_signal_to_string (oursig)); | |
3323 | } | |
3324 | ||
3325 | /* Specify how various signals in the inferior should be handled. */ | |
3326 | ||
3327 | static void | |
96baa820 | 3328 | handle_command (char *args, int from_tty) |
c906108c SS |
3329 | { |
3330 | char **argv; | |
3331 | int digits, wordlen; | |
3332 | int sigfirst, signum, siglast; | |
3333 | enum target_signal oursig; | |
3334 | int allsigs; | |
3335 | int nsigs; | |
3336 | unsigned char *sigs; | |
3337 | struct cleanup *old_chain; | |
3338 | ||
3339 | if (args == NULL) | |
3340 | { | |
3341 | error_no_arg ("signal to handle"); | |
3342 | } | |
3343 | ||
3344 | /* Allocate and zero an array of flags for which signals to handle. */ | |
3345 | ||
3346 | nsigs = (int) TARGET_SIGNAL_LAST; | |
3347 | sigs = (unsigned char *) alloca (nsigs); | |
3348 | memset (sigs, 0, nsigs); | |
3349 | ||
3350 | /* Break the command line up into args. */ | |
3351 | ||
3352 | argv = buildargv (args); | |
3353 | if (argv == NULL) | |
3354 | { | |
3355 | nomem (0); | |
3356 | } | |
7a292a7a | 3357 | old_chain = make_cleanup_freeargv (argv); |
c906108c SS |
3358 | |
3359 | /* Walk through the args, looking for signal oursigs, signal names, and | |
3360 | actions. Signal numbers and signal names may be interspersed with | |
3361 | actions, with the actions being performed for all signals cumulatively | |
3362 | specified. Signal ranges can be specified as <LOW>-<HIGH>. */ | |
3363 | ||
3364 | while (*argv != NULL) | |
3365 | { | |
3366 | wordlen = strlen (*argv); | |
3367 | for (digits = 0; isdigit ((*argv)[digits]); digits++) | |
3368 | {; | |
3369 | } | |
3370 | allsigs = 0; | |
3371 | sigfirst = siglast = -1; | |
3372 | ||
3373 | if (wordlen >= 1 && !strncmp (*argv, "all", wordlen)) | |
3374 | { | |
3375 | /* Apply action to all signals except those used by the | |
3376 | debugger. Silently skip those. */ | |
3377 | allsigs = 1; | |
3378 | sigfirst = 0; | |
3379 | siglast = nsigs - 1; | |
3380 | } | |
3381 | else if (wordlen >= 1 && !strncmp (*argv, "stop", wordlen)) | |
3382 | { | |
3383 | SET_SIGS (nsigs, sigs, signal_stop); | |
3384 | SET_SIGS (nsigs, sigs, signal_print); | |
3385 | } | |
3386 | else if (wordlen >= 1 && !strncmp (*argv, "ignore", wordlen)) | |
3387 | { | |
3388 | UNSET_SIGS (nsigs, sigs, signal_program); | |
3389 | } | |
3390 | else if (wordlen >= 2 && !strncmp (*argv, "print", wordlen)) | |
3391 | { | |
3392 | SET_SIGS (nsigs, sigs, signal_print); | |
3393 | } | |
3394 | else if (wordlen >= 2 && !strncmp (*argv, "pass", wordlen)) | |
3395 | { | |
3396 | SET_SIGS (nsigs, sigs, signal_program); | |
3397 | } | |
3398 | else if (wordlen >= 3 && !strncmp (*argv, "nostop", wordlen)) | |
3399 | { | |
3400 | UNSET_SIGS (nsigs, sigs, signal_stop); | |
3401 | } | |
3402 | else if (wordlen >= 3 && !strncmp (*argv, "noignore", wordlen)) | |
3403 | { | |
3404 | SET_SIGS (nsigs, sigs, signal_program); | |
3405 | } | |
3406 | else if (wordlen >= 4 && !strncmp (*argv, "noprint", wordlen)) | |
3407 | { | |
3408 | UNSET_SIGS (nsigs, sigs, signal_print); | |
3409 | UNSET_SIGS (nsigs, sigs, signal_stop); | |
3410 | } | |
3411 | else if (wordlen >= 4 && !strncmp (*argv, "nopass", wordlen)) | |
3412 | { | |
3413 | UNSET_SIGS (nsigs, sigs, signal_program); | |
3414 | } | |
3415 | else if (digits > 0) | |
3416 | { | |
3417 | /* It is numeric. The numeric signal refers to our own | |
3418 | internal signal numbering from target.h, not to host/target | |
3419 | signal number. This is a feature; users really should be | |
3420 | using symbolic names anyway, and the common ones like | |
3421 | SIGHUP, SIGINT, SIGALRM, etc. will work right anyway. */ | |
3422 | ||
3423 | sigfirst = siglast = (int) | |
3424 | target_signal_from_command (atoi (*argv)); | |
3425 | if ((*argv)[digits] == '-') | |
3426 | { | |
3427 | siglast = (int) | |
3428 | target_signal_from_command (atoi ((*argv) + digits + 1)); | |
3429 | } | |
3430 | if (sigfirst > siglast) | |
3431 | { | |
3432 | /* Bet he didn't figure we'd think of this case... */ | |
3433 | signum = sigfirst; | |
3434 | sigfirst = siglast; | |
3435 | siglast = signum; | |
3436 | } | |
3437 | } | |
3438 | else | |
3439 | { | |
3440 | oursig = target_signal_from_name (*argv); | |
3441 | if (oursig != TARGET_SIGNAL_UNKNOWN) | |
3442 | { | |
3443 | sigfirst = siglast = (int) oursig; | |
3444 | } | |
3445 | else | |
3446 | { | |
3447 | /* Not a number and not a recognized flag word => complain. */ | |
3448 | error ("Unrecognized or ambiguous flag word: \"%s\".", *argv); | |
3449 | } | |
3450 | } | |
3451 | ||
3452 | /* If any signal numbers or symbol names were found, set flags for | |
c5aa993b | 3453 | which signals to apply actions to. */ |
c906108c SS |
3454 | |
3455 | for (signum = sigfirst; signum >= 0 && signum <= siglast; signum++) | |
3456 | { | |
3457 | switch ((enum target_signal) signum) | |
3458 | { | |
3459 | case TARGET_SIGNAL_TRAP: | |
3460 | case TARGET_SIGNAL_INT: | |
3461 | if (!allsigs && !sigs[signum]) | |
3462 | { | |
3463 | if (query ("%s is used by the debugger.\n\ | |
3464 | Are you sure you want to change it? ", | |
3465 | target_signal_to_name | |
3466 | ((enum target_signal) signum))) | |
3467 | { | |
3468 | sigs[signum] = 1; | |
3469 | } | |
3470 | else | |
3471 | { | |
3472 | printf_unfiltered ("Not confirmed, unchanged.\n"); | |
3473 | gdb_flush (gdb_stdout); | |
3474 | } | |
3475 | } | |
3476 | break; | |
3477 | case TARGET_SIGNAL_0: | |
3478 | case TARGET_SIGNAL_DEFAULT: | |
3479 | case TARGET_SIGNAL_UNKNOWN: | |
3480 | /* Make sure that "all" doesn't print these. */ | |
3481 | break; | |
3482 | default: | |
3483 | sigs[signum] = 1; | |
3484 | break; | |
3485 | } | |
3486 | } | |
3487 | ||
3488 | argv++; | |
3489 | } | |
3490 | ||
3491 | target_notice_signals (inferior_pid); | |
3492 | ||
3493 | if (from_tty) | |
3494 | { | |
3495 | /* Show the results. */ | |
3496 | sig_print_header (); | |
3497 | for (signum = 0; signum < nsigs; signum++) | |
3498 | { | |
3499 | if (sigs[signum]) | |
3500 | { | |
3501 | sig_print_info (signum); | |
3502 | } | |
3503 | } | |
3504 | } | |
3505 | ||
3506 | do_cleanups (old_chain); | |
3507 | } | |
3508 | ||
3509 | static void | |
96baa820 | 3510 | xdb_handle_command (char *args, int from_tty) |
c906108c SS |
3511 | { |
3512 | char **argv; | |
3513 | struct cleanup *old_chain; | |
3514 | ||
3515 | /* Break the command line up into args. */ | |
3516 | ||
3517 | argv = buildargv (args); | |
3518 | if (argv == NULL) | |
3519 | { | |
3520 | nomem (0); | |
3521 | } | |
7a292a7a | 3522 | old_chain = make_cleanup_freeargv (argv); |
c906108c SS |
3523 | if (argv[1] != (char *) NULL) |
3524 | { | |
3525 | char *argBuf; | |
3526 | int bufLen; | |
3527 | ||
3528 | bufLen = strlen (argv[0]) + 20; | |
3529 | argBuf = (char *) xmalloc (bufLen); | |
3530 | if (argBuf) | |
3531 | { | |
3532 | int validFlag = 1; | |
3533 | enum target_signal oursig; | |
3534 | ||
3535 | oursig = target_signal_from_name (argv[0]); | |
3536 | memset (argBuf, 0, bufLen); | |
3537 | if (strcmp (argv[1], "Q") == 0) | |
3538 | sprintf (argBuf, "%s %s", argv[0], "noprint"); | |
3539 | else | |
3540 | { | |
3541 | if (strcmp (argv[1], "s") == 0) | |
3542 | { | |
3543 | if (!signal_stop[oursig]) | |
3544 | sprintf (argBuf, "%s %s", argv[0], "stop"); | |
3545 | else | |
3546 | sprintf (argBuf, "%s %s", argv[0], "nostop"); | |
3547 | } | |
3548 | else if (strcmp (argv[1], "i") == 0) | |
3549 | { | |
3550 | if (!signal_program[oursig]) | |
3551 | sprintf (argBuf, "%s %s", argv[0], "pass"); | |
3552 | else | |
3553 | sprintf (argBuf, "%s %s", argv[0], "nopass"); | |
3554 | } | |
3555 | else if (strcmp (argv[1], "r") == 0) | |
3556 | { | |
3557 | if (!signal_print[oursig]) | |
3558 | sprintf (argBuf, "%s %s", argv[0], "print"); | |
3559 | else | |
3560 | sprintf (argBuf, "%s %s", argv[0], "noprint"); | |
3561 | } | |
3562 | else | |
3563 | validFlag = 0; | |
3564 | } | |
3565 | if (validFlag) | |
3566 | handle_command (argBuf, from_tty); | |
3567 | else | |
3568 | printf_filtered ("Invalid signal handling flag.\n"); | |
3569 | if (argBuf) | |
3570 | free (argBuf); | |
3571 | } | |
3572 | } | |
3573 | do_cleanups (old_chain); | |
3574 | } | |
3575 | ||
3576 | /* Print current contents of the tables set by the handle command. | |
3577 | It is possible we should just be printing signals actually used | |
3578 | by the current target (but for things to work right when switching | |
3579 | targets, all signals should be in the signal tables). */ | |
3580 | ||
3581 | static void | |
96baa820 | 3582 | signals_info (char *signum_exp, int from_tty) |
c906108c SS |
3583 | { |
3584 | enum target_signal oursig; | |
3585 | sig_print_header (); | |
3586 | ||
3587 | if (signum_exp) | |
3588 | { | |
3589 | /* First see if this is a symbol name. */ | |
3590 | oursig = target_signal_from_name (signum_exp); | |
3591 | if (oursig == TARGET_SIGNAL_UNKNOWN) | |
3592 | { | |
3593 | /* No, try numeric. */ | |
3594 | oursig = | |
3595 | target_signal_from_command (parse_and_eval_address (signum_exp)); | |
3596 | } | |
3597 | sig_print_info (oursig); | |
3598 | return; | |
3599 | } | |
3600 | ||
3601 | printf_filtered ("\n"); | |
3602 | /* These ugly casts brought to you by the native VAX compiler. */ | |
3603 | for (oursig = TARGET_SIGNAL_FIRST; | |
3604 | (int) oursig < (int) TARGET_SIGNAL_LAST; | |
3605 | oursig = (enum target_signal) ((int) oursig + 1)) | |
3606 | { | |
3607 | QUIT; | |
3608 | ||
3609 | if (oursig != TARGET_SIGNAL_UNKNOWN | |
3610 | && oursig != TARGET_SIGNAL_DEFAULT | |
3611 | && oursig != TARGET_SIGNAL_0) | |
3612 | sig_print_info (oursig); | |
3613 | } | |
3614 | ||
3615 | printf_filtered ("\nUse the \"handle\" command to change these tables.\n"); | |
3616 | } | |
3617 | \f | |
7a292a7a SS |
3618 | struct inferior_status |
3619 | { | |
3620 | enum target_signal stop_signal; | |
3621 | CORE_ADDR stop_pc; | |
3622 | bpstat stop_bpstat; | |
3623 | int stop_step; | |
3624 | int stop_stack_dummy; | |
3625 | int stopped_by_random_signal; | |
3626 | int trap_expected; | |
3627 | CORE_ADDR step_range_start; | |
3628 | CORE_ADDR step_range_end; | |
3629 | CORE_ADDR step_frame_address; | |
3630 | int step_over_calls; | |
3631 | CORE_ADDR step_resume_break_address; | |
3632 | int stop_after_trap; | |
3633 | int stop_soon_quietly; | |
3634 | CORE_ADDR selected_frame_address; | |
3635 | char *stop_registers; | |
3636 | ||
3637 | /* These are here because if call_function_by_hand has written some | |
3638 | registers and then decides to call error(), we better not have changed | |
3639 | any registers. */ | |
3640 | char *registers; | |
3641 | ||
3642 | int selected_level; | |
3643 | int breakpoint_proceeded; | |
3644 | int restore_stack_info; | |
3645 | int proceed_to_finish; | |
3646 | }; | |
3647 | ||
7a292a7a | 3648 | static struct inferior_status * |
96baa820 | 3649 | xmalloc_inferior_status (void) |
7a292a7a SS |
3650 | { |
3651 | struct inferior_status *inf_status; | |
3652 | inf_status = xmalloc (sizeof (struct inferior_status)); | |
3653 | inf_status->stop_registers = xmalloc (REGISTER_BYTES); | |
3654 | inf_status->registers = xmalloc (REGISTER_BYTES); | |
3655 | return inf_status; | |
3656 | } | |
3657 | ||
7a292a7a | 3658 | static void |
96baa820 | 3659 | free_inferior_status (struct inferior_status *inf_status) |
7a292a7a SS |
3660 | { |
3661 | free (inf_status->registers); | |
3662 | free (inf_status->stop_registers); | |
3663 | free (inf_status); | |
3664 | } | |
3665 | ||
3666 | void | |
96baa820 JM |
3667 | write_inferior_status_register (struct inferior_status *inf_status, int regno, |
3668 | LONGEST val) | |
7a292a7a | 3669 | { |
c5aa993b | 3670 | int size = REGISTER_RAW_SIZE (regno); |
7a292a7a SS |
3671 | void *buf = alloca (size); |
3672 | store_signed_integer (buf, size, val); | |
3673 | memcpy (&inf_status->registers[REGISTER_BYTE (regno)], buf, size); | |
3674 | } | |
3675 | ||
c906108c SS |
3676 | /* Save all of the information associated with the inferior<==>gdb |
3677 | connection. INF_STATUS is a pointer to a "struct inferior_status" | |
3678 | (defined in inferior.h). */ | |
3679 | ||
7a292a7a | 3680 | struct inferior_status * |
96baa820 | 3681 | save_inferior_status (int restore_stack_info) |
c906108c | 3682 | { |
7a292a7a SS |
3683 | struct inferior_status *inf_status = xmalloc_inferior_status (); |
3684 | ||
c906108c SS |
3685 | inf_status->stop_signal = stop_signal; |
3686 | inf_status->stop_pc = stop_pc; | |
3687 | inf_status->stop_step = stop_step; | |
3688 | inf_status->stop_stack_dummy = stop_stack_dummy; | |
3689 | inf_status->stopped_by_random_signal = stopped_by_random_signal; | |
3690 | inf_status->trap_expected = trap_expected; | |
3691 | inf_status->step_range_start = step_range_start; | |
3692 | inf_status->step_range_end = step_range_end; | |
3693 | inf_status->step_frame_address = step_frame_address; | |
3694 | inf_status->step_over_calls = step_over_calls; | |
3695 | inf_status->stop_after_trap = stop_after_trap; | |
3696 | inf_status->stop_soon_quietly = stop_soon_quietly; | |
3697 | /* Save original bpstat chain here; replace it with copy of chain. | |
3698 | If caller's caller is walking the chain, they'll be happier if we | |
7a292a7a SS |
3699 | hand them back the original chain when restore_inferior_status is |
3700 | called. */ | |
c906108c SS |
3701 | inf_status->stop_bpstat = stop_bpstat; |
3702 | stop_bpstat = bpstat_copy (stop_bpstat); | |
3703 | inf_status->breakpoint_proceeded = breakpoint_proceeded; | |
3704 | inf_status->restore_stack_info = restore_stack_info; | |
3705 | inf_status->proceed_to_finish = proceed_to_finish; | |
c5aa993b | 3706 | |
c906108c SS |
3707 | memcpy (inf_status->stop_registers, stop_registers, REGISTER_BYTES); |
3708 | ||
3709 | read_register_bytes (0, inf_status->registers, REGISTER_BYTES); | |
3710 | ||
3711 | record_selected_frame (&(inf_status->selected_frame_address), | |
3712 | &(inf_status->selected_level)); | |
7a292a7a | 3713 | return inf_status; |
c906108c SS |
3714 | } |
3715 | ||
3716 | struct restore_selected_frame_args | |
3717 | { | |
3718 | CORE_ADDR frame_address; | |
3719 | int level; | |
3720 | }; | |
3721 | ||
c906108c | 3722 | static int |
96baa820 | 3723 | restore_selected_frame (void *args) |
c906108c SS |
3724 | { |
3725 | struct restore_selected_frame_args *fr = | |
3726 | (struct restore_selected_frame_args *) args; | |
3727 | struct frame_info *frame; | |
3728 | int level = fr->level; | |
3729 | ||
3730 | frame = find_relative_frame (get_current_frame (), &level); | |
3731 | ||
3732 | /* If inf_status->selected_frame_address is NULL, there was no | |
3733 | previously selected frame. */ | |
3734 | if (frame == NULL || | |
3735 | /* FRAME_FP (frame) != fr->frame_address || */ | |
3736 | /* elz: deleted this check as a quick fix to the problem that | |
c5aa993b JM |
3737 | for function called by hand gdb creates no internal frame |
3738 | structure and the real stack and gdb's idea of stack are | |
3739 | different if nested calls by hands are made. | |
c906108c | 3740 | |
c5aa993b | 3741 | mvs: this worries me. */ |
c906108c SS |
3742 | level != 0) |
3743 | { | |
3744 | warning ("Unable to restore previously selected frame.\n"); | |
3745 | return 0; | |
3746 | } | |
3747 | ||
3748 | select_frame (frame, fr->level); | |
3749 | ||
3750 | return (1); | |
3751 | } | |
3752 | ||
3753 | void | |
96baa820 | 3754 | restore_inferior_status (struct inferior_status *inf_status) |
c906108c SS |
3755 | { |
3756 | stop_signal = inf_status->stop_signal; | |
3757 | stop_pc = inf_status->stop_pc; | |
3758 | stop_step = inf_status->stop_step; | |
3759 | stop_stack_dummy = inf_status->stop_stack_dummy; | |
3760 | stopped_by_random_signal = inf_status->stopped_by_random_signal; | |
3761 | trap_expected = inf_status->trap_expected; | |
3762 | step_range_start = inf_status->step_range_start; | |
3763 | step_range_end = inf_status->step_range_end; | |
3764 | step_frame_address = inf_status->step_frame_address; | |
3765 | step_over_calls = inf_status->step_over_calls; | |
3766 | stop_after_trap = inf_status->stop_after_trap; | |
3767 | stop_soon_quietly = inf_status->stop_soon_quietly; | |
3768 | bpstat_clear (&stop_bpstat); | |
3769 | stop_bpstat = inf_status->stop_bpstat; | |
3770 | breakpoint_proceeded = inf_status->breakpoint_proceeded; | |
3771 | proceed_to_finish = inf_status->proceed_to_finish; | |
3772 | ||
7a292a7a | 3773 | /* FIXME: Is the restore of stop_registers always needed */ |
c906108c SS |
3774 | memcpy (stop_registers, inf_status->stop_registers, REGISTER_BYTES); |
3775 | ||
3776 | /* The inferior can be gone if the user types "print exit(0)" | |
3777 | (and perhaps other times). */ | |
3778 | if (target_has_execution) | |
3779 | write_register_bytes (0, inf_status->registers, REGISTER_BYTES); | |
3780 | ||
c906108c SS |
3781 | /* FIXME: If we are being called after stopping in a function which |
3782 | is called from gdb, we should not be trying to restore the | |
3783 | selected frame; it just prints a spurious error message (The | |
3784 | message is useful, however, in detecting bugs in gdb (like if gdb | |
3785 | clobbers the stack)). In fact, should we be restoring the | |
3786 | inferior status at all in that case? . */ | |
3787 | ||
3788 | if (target_has_stack && inf_status->restore_stack_info) | |
3789 | { | |
3790 | struct restore_selected_frame_args fr; | |
3791 | fr.level = inf_status->selected_level; | |
3792 | fr.frame_address = inf_status->selected_frame_address; | |
3793 | /* The point of catch_errors is that if the stack is clobbered, | |
c5aa993b JM |
3794 | walking the stack might encounter a garbage pointer and error() |
3795 | trying to dereference it. */ | |
c906108c SS |
3796 | if (catch_errors (restore_selected_frame, &fr, |
3797 | "Unable to restore previously selected frame:\n", | |
3798 | RETURN_MASK_ERROR) == 0) | |
3799 | /* Error in restoring the selected frame. Select the innermost | |
3800 | frame. */ | |
3801 | ||
3802 | ||
3803 | select_frame (get_current_frame (), 0); | |
3804 | ||
3805 | } | |
c906108c | 3806 | |
7a292a7a SS |
3807 | free_inferior_status (inf_status); |
3808 | } | |
c906108c SS |
3809 | |
3810 | void | |
96baa820 | 3811 | discard_inferior_status (struct inferior_status *inf_status) |
7a292a7a SS |
3812 | { |
3813 | /* See save_inferior_status for info on stop_bpstat. */ | |
3814 | bpstat_clear (&inf_status->stop_bpstat); | |
3815 | free_inferior_status (inf_status); | |
3816 | } | |
3817 | ||
3818 | static void | |
96baa820 JM |
3819 | set_follow_fork_mode_command (char *arg, int from_tty, |
3820 | struct cmd_list_element *c) | |
c906108c SS |
3821 | { |
3822 | if (!STREQ (arg, "parent") && | |
3823 | !STREQ (arg, "child") && | |
3824 | !STREQ (arg, "both") && | |
3825 | !STREQ (arg, "ask")) | |
3826 | error ("follow-fork-mode must be one of \"parent\", \"child\", \"both\" or \"ask\"."); | |
3827 | ||
3828 | if (follow_fork_mode_string != NULL) | |
3829 | free (follow_fork_mode_string); | |
3830 | follow_fork_mode_string = savestring (arg, strlen (arg)); | |
3831 | } | |
c5aa993b | 3832 | \f |
7a292a7a | 3833 | static void |
96baa820 | 3834 | build_infrun (void) |
7a292a7a SS |
3835 | { |
3836 | stop_registers = xmalloc (REGISTER_BYTES); | |
3837 | } | |
c906108c | 3838 | |
c906108c | 3839 | void |
96baa820 | 3840 | _initialize_infrun (void) |
c906108c SS |
3841 | { |
3842 | register int i; | |
3843 | register int numsigs; | |
3844 | struct cmd_list_element *c; | |
3845 | ||
7a292a7a SS |
3846 | build_infrun (); |
3847 | ||
0f71a2f6 JM |
3848 | register_gdbarch_swap (&stop_registers, sizeof (stop_registers), NULL); |
3849 | register_gdbarch_swap (NULL, 0, build_infrun); | |
3850 | ||
c906108c SS |
3851 | add_info ("signals", signals_info, |
3852 | "What debugger does when program gets various signals.\n\ | |
3853 | Specify a signal as argument to print info on that signal only."); | |
3854 | add_info_alias ("handle", "signals", 0); | |
3855 | ||
3856 | add_com ("handle", class_run, handle_command, | |
3857 | concat ("Specify how to handle a signal.\n\ | |
3858 | Args are signals and actions to apply to those signals.\n\ | |
3859 | Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\ | |
3860 | from 1-15 are allowed for compatibility with old versions of GDB.\n\ | |
3861 | Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\ | |
3862 | The special arg \"all\" is recognized to mean all signals except those\n\ | |
3863 | used by the debugger, typically SIGTRAP and SIGINT.\n", | |
3864 | "Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\ | |
3865 | \"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\ | |
3866 | Stop means reenter debugger if this signal happens (implies print).\n\ | |
3867 | Print means print a message if this signal happens.\n\ | |
3868 | Pass means let program see this signal; otherwise program doesn't know.\n\ | |
3869 | Ignore is a synonym for nopass and noignore is a synonym for pass.\n\ | |
3870 | Pass and Stop may be combined.", NULL)); | |
3871 | if (xdb_commands) | |
3872 | { | |
3873 | add_com ("lz", class_info, signals_info, | |
3874 | "What debugger does when program gets various signals.\n\ | |
3875 | Specify a signal as argument to print info on that signal only."); | |
3876 | add_com ("z", class_run, xdb_handle_command, | |
3877 | concat ("Specify how to handle a signal.\n\ | |
3878 | Args are signals and actions to apply to those signals.\n\ | |
3879 | Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\ | |
3880 | from 1-15 are allowed for compatibility with old versions of GDB.\n\ | |
3881 | Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\ | |
3882 | The special arg \"all\" is recognized to mean all signals except those\n\ | |
3883 | used by the debugger, typically SIGTRAP and SIGINT.\n", | |
3884 | "Recognized actions include \"s\" (toggles between stop and nostop), \n\ | |
3885 | \"r\" (toggles between print and noprint), \"i\" (toggles between pass and \ | |
3886 | nopass), \"Q\" (noprint)\n\ | |
3887 | Stop means reenter debugger if this signal happens (implies print).\n\ | |
3888 | Print means print a message if this signal happens.\n\ | |
3889 | Pass means let program see this signal; otherwise program doesn't know.\n\ | |
3890 | Ignore is a synonym for nopass and noignore is a synonym for pass.\n\ | |
3891 | Pass and Stop may be combined.", NULL)); | |
3892 | } | |
3893 | ||
3894 | if (!dbx_commands) | |
3895 | stop_command = add_cmd ("stop", class_obscure, not_just_help_class_command, | |
3896 | "There is no `stop' command, but you can set a hook on `stop'.\n\ | |
3897 | This allows you to set a list of commands to be run each time execution\n\ | |
3898 | of the program stops.", &cmdlist); | |
3899 | ||
3900 | numsigs = (int) TARGET_SIGNAL_LAST; | |
3901 | signal_stop = (unsigned char *) | |
3902 | xmalloc (sizeof (signal_stop[0]) * numsigs); | |
3903 | signal_print = (unsigned char *) | |
3904 | xmalloc (sizeof (signal_print[0]) * numsigs); | |
3905 | signal_program = (unsigned char *) | |
3906 | xmalloc (sizeof (signal_program[0]) * numsigs); | |
3907 | for (i = 0; i < numsigs; i++) | |
3908 | { | |
3909 | signal_stop[i] = 1; | |
3910 | signal_print[i] = 1; | |
3911 | signal_program[i] = 1; | |
3912 | } | |
3913 | ||
3914 | /* Signals caused by debugger's own actions | |
3915 | should not be given to the program afterwards. */ | |
3916 | signal_program[TARGET_SIGNAL_TRAP] = 0; | |
3917 | signal_program[TARGET_SIGNAL_INT] = 0; | |
3918 | ||
3919 | /* Signals that are not errors should not normally enter the debugger. */ | |
3920 | signal_stop[TARGET_SIGNAL_ALRM] = 0; | |
3921 | signal_print[TARGET_SIGNAL_ALRM] = 0; | |
3922 | signal_stop[TARGET_SIGNAL_VTALRM] = 0; | |
3923 | signal_print[TARGET_SIGNAL_VTALRM] = 0; | |
3924 | signal_stop[TARGET_SIGNAL_PROF] = 0; | |
3925 | signal_print[TARGET_SIGNAL_PROF] = 0; | |
3926 | signal_stop[TARGET_SIGNAL_CHLD] = 0; | |
3927 | signal_print[TARGET_SIGNAL_CHLD] = 0; | |
3928 | signal_stop[TARGET_SIGNAL_IO] = 0; | |
3929 | signal_print[TARGET_SIGNAL_IO] = 0; | |
3930 | signal_stop[TARGET_SIGNAL_POLL] = 0; | |
3931 | signal_print[TARGET_SIGNAL_POLL] = 0; | |
3932 | signal_stop[TARGET_SIGNAL_URG] = 0; | |
3933 | signal_print[TARGET_SIGNAL_URG] = 0; | |
3934 | signal_stop[TARGET_SIGNAL_WINCH] = 0; | |
3935 | signal_print[TARGET_SIGNAL_WINCH] = 0; | |
3936 | ||
cd0fc7c3 SS |
3937 | /* These signals are used internally by user-level thread |
3938 | implementations. (See signal(5) on Solaris.) Like the above | |
3939 | signals, a healthy program receives and handles them as part of | |
3940 | its normal operation. */ | |
3941 | signal_stop[TARGET_SIGNAL_LWP] = 0; | |
3942 | signal_print[TARGET_SIGNAL_LWP] = 0; | |
3943 | signal_stop[TARGET_SIGNAL_WAITING] = 0; | |
3944 | signal_print[TARGET_SIGNAL_WAITING] = 0; | |
3945 | signal_stop[TARGET_SIGNAL_CANCEL] = 0; | |
3946 | signal_print[TARGET_SIGNAL_CANCEL] = 0; | |
3947 | ||
c906108c SS |
3948 | #ifdef SOLIB_ADD |
3949 | add_show_from_set | |
3950 | (add_set_cmd ("stop-on-solib-events", class_support, var_zinteger, | |
3951 | (char *) &stop_on_solib_events, | |
3952 | "Set stopping for shared library events.\n\ | |
3953 | If nonzero, gdb will give control to the user when the dynamic linker\n\ | |
3954 | notifies gdb of shared library events. The most common event of interest\n\ | |
3955 | to the user would be loading/unloading of a new library.\n", | |
3956 | &setlist), | |
3957 | &showlist); | |
3958 | #endif | |
3959 | ||
3960 | c = add_set_enum_cmd ("follow-fork-mode", | |
3961 | class_run, | |
3962 | follow_fork_mode_kind_names, | |
3963 | (char *) &follow_fork_mode_string, | |
3964 | /* ??rehrauer: The "both" option is broken, by what may be a 10.20 | |
3965 | kernel problem. It's also not terribly useful without a GUI to | |
3966 | help the user drive two debuggers. So for now, I'm disabling | |
3967 | the "both" option. */ | |
c5aa993b JM |
3968 | /* "Set debugger response to a program call of fork \ |
3969 | or vfork.\n\ | |
3970 | A fork or vfork creates a new process. follow-fork-mode can be:\n\ | |
3971 | parent - the original process is debugged after a fork\n\ | |
3972 | child - the new process is debugged after a fork\n\ | |
3973 | both - both the parent and child are debugged after a fork\n\ | |
3974 | ask - the debugger will ask for one of the above choices\n\ | |
3975 | For \"both\", another copy of the debugger will be started to follow\n\ | |
3976 | the new child process. The original debugger will continue to follow\n\ | |
3977 | the original parent process. To distinguish their prompts, the\n\ | |
3978 | debugger copy's prompt will be changed.\n\ | |
3979 | For \"parent\" or \"child\", the unfollowed process will run free.\n\ | |
3980 | By default, the debugger will follow the parent process.", | |
3981 | */ | |
c906108c SS |
3982 | "Set debugger response to a program call of fork \ |
3983 | or vfork.\n\ | |
3984 | A fork or vfork creates a new process. follow-fork-mode can be:\n\ | |
3985 | parent - the original process is debugged after a fork\n\ | |
3986 | child - the new process is debugged after a fork\n\ | |
3987 | ask - the debugger will ask for one of the above choices\n\ | |
3988 | For \"parent\" or \"child\", the unfollowed process will run free.\n\ | |
3989 | By default, the debugger will follow the parent process.", | |
3990 | &setlist); | |
c5aa993b | 3991 | /* c->function.sfunc = ; */ |
c906108c SS |
3992 | add_show_from_set (c, &showlist); |
3993 | ||
3994 | set_follow_fork_mode_command ("parent", 0, NULL); | |
3995 | ||
3996 | c = add_set_enum_cmd ("scheduler-locking", class_run, | |
3997 | scheduler_enums, /* array of string names */ | |
3998 | (char *) &scheduler_mode, /* current mode */ | |
3999 | "Set mode for locking scheduler during execution.\n\ | |
4000 | off == no locking (threads may preempt at any time)\n\ | |
4001 | on == full locking (no thread except the current thread may run)\n\ | |
4002 | step == scheduler locked during every single-step operation.\n\ | |
4003 | In this mode, no other thread may run during a step command.\n\ | |
4004 | Other threads may run while stepping over a function call ('next').", | |
4005 | &setlist); | |
4006 | ||
4007 | c->function.sfunc = set_schedlock_func; /* traps on target vector */ | |
4008 | add_show_from_set (c, &showlist); | |
4009 | } |