[deliverable/binutils-gdb.git] / gdb / monitor.h

/* Definitions for remote debugging interface for ROM monitors.
   Copyright (C) 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
   2007 Free Software Foundation, Inc.
   Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.

   This file is part of GDB.

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 51 Franklin Street, Fifth Floor,
   Boston, MA 02110-1301, USA.
 */

#ifndef MONITOR_H
#define MONITOR_H

struct target_waitstatus;
struct serial;

/* This structure describes the strings necessary to give small command
   sequences to the monitor, and parse the response.

   CMD is the actual command typed at the monitor.  Usually this has
   embedded sequences ala printf, which are substituted with the
   arguments appropriate to that type of command.  Ie: to examine a
   register, we substitute the register name for the first arg.  To
   modify memory, we substitute the memory location and the new
   contents for the first and second args, etc...

   RESP_DELIM used to home in on the response string, and is used to
   disambiguate the answer within the pile of text returned by the
   monitor.  This should be a unique string that immediately precedes
   the answer.  Ie: if your monitor prints out `PC: 00000001= ' in
   response to asking for the PC, you should use `: ' as the
   RESP_DELIM.  RESP_DELIM may be NULL if the res- ponse is going to
   be ignored, or has no particular leading text.

   TERM is the string that the monitor outputs to indicate that it is
   idle, and waiting for input.  This is usually a prompt of some
   sort.  In the previous example, it would be `= '.  It is important
   that TERM really means that the monitor is idle, otherwise GDB may
   try to type at it when it isn't ready for input.  This is a problem
   because many monitors cannot deal with type-ahead.  TERM may be
   NULL if the normal prompt is output.

   TERM_CMD is used to quit out of the subcommand mode and get back to
   the main prompt.  TERM_CMD may be NULL if it isn't necessary.  It
   will also be ignored if TERM is NULL.  */

struct memrw_cmd
  {
    char *cmdb;			/* Command to send for byte read/write */
    char *cmdw;			/* Command for word (16 bit) read/write */
    char *cmdl;			/* Command for long (32 bit) read/write */
    char *cmdll;		/* Command for long long (64 bit) read/write */
    char *resp_delim;		/* String just prior to the desired value */
    char *term;			/* Terminating string to search for */
    char *term_cmd;		/* String to get out of sub-mode (if necessary) */
  };

struct regrw_cmd
  {
    char *cmd;			/* Command to send for reg read/write */
    char *resp_delim;		/* String (actually a regexp if getmem) just
				   prior to the desired value */
    char *term;			/* Terminating string to search for */
    char *term_cmd;		/* String to get out of sub-mode (if necessary) */
  };

struct monitor_ops
  {
    int flags;			/* See below */
    char **init;		/* List of init commands.  NULL terminated. */
    char *cont;			/* continue command */
    char *step;			/* single step */
    char *stop;			/* Interrupt program string */
    char *set_break;		/* set a breakpoint. If NULL, monitor implementation
				   sets its own to_insert_breakpoint method. */
    char *clr_break;		/* clear a breakpoint */
    char *clr_all_break;	/* Clear all breakpoints */
    char *fill;			/* Memory fill cmd (addr len val) */
    struct memrw_cmd setmem;	/* set memory to a value */
    struct memrw_cmd getmem;	/* display memory */
    struct regrw_cmd setreg;	/* set a register */
    struct regrw_cmd getreg;	/* get a register */
    /* Some commands can dump a bunch of registers
       at once.  This comes as a set of REG=VAL
       pairs.  This should be called for each pair
       of registers that we can parse to supply
       GDB with the value of a register.  */
    char *dump_registers;	/* Command to dump all regs at once */
    char *register_pattern;	/* Pattern that picks out register from reg dump */
    void (*supply_register) (char *name, int namelen, char *val, int vallen);
    void (*load_routine) (struct serial *desc, char *file,
			  int hashmark);	/* Download routine */
    int (*dumpregs) (void);	/* routine to dump all registers */
    int (*continue_hook) (void);	/* Emit the continue command */
    int (*wait_filter) (char *buf,	/* Maybe contains registers */
			int bufmax,
			int *response_length,
			struct target_waitstatus * status);
    char *load;			/* load command */
    char *loadresp;		/* Response to load command */
    char *prompt;		/* monitor command prompt */
    char *line_term;		/* end-of-command delimitor */
    char *cmd_end;		/* optional command terminator */
    struct target_ops *target;	/* target operations */
    int stopbits;		/* number of stop bits */
    char **regnames;		/* array of register names in ascii */
                                /* deprecated: use regname instead */
    const char *(*regname) (int index); 
                                /* function for dynamic regname array */
    int num_breakpoints;	/* If set_break != NULL, number of supported
				   breakpoints */
    int magic;			/* Check value */
  };

/* The monitor ops magic number, used to detect if an ops structure doesn't
   have the right number of entries filled in. */

#define MONITOR_OPS_MAGIC 600925

/* Flag definitions. */

/* If set, then clear breakpoint command uses address, otherwise it
   uses an index returned by the monitor.  */

#define MO_CLR_BREAK_USES_ADDR 0x1

/* If set, then memory fill command uses STARTADDR, ENDADDR+1, VALUE
   as args, else it uses STARTADDR, LENGTH, VALUE as args. */

#define MO_FILL_USES_ADDR 0x2

/* If set, then monitor doesn't automatically supply register dump
   when coming back after a continue.  */

#define MO_NEED_REGDUMP_AFTER_CONT 0x4

/* getmem needs start addr and end addr */

#define MO_GETMEM_NEEDS_RANGE 0x8

/* getmem can only read one loc at a time */

#define MO_GETMEM_READ_SINGLE 0x10

/* handle \r\n combinations */

#define MO_HANDLE_NL 0x20

/* don't expect echos in monitor_open */

#define MO_NO_ECHO_ON_OPEN 0x40

/* If set, send break to stop monitor */

#define MO_SEND_BREAK_ON_STOP 0x80

/* If set, target sends an ACK after each S-record */

#define MO_SREC_ACK 0x100

/* Allow 0x prefix on addresses retured from monitor */

#define MO_HEX_PREFIX 0x200

/* Some monitors require a different command when starting a program */

#define MO_RUN_FIRST_TIME 0x400

/* Don't expect echos when getting memory */

#define MO_NO_ECHO_ON_SETMEM 0x800

/* If set, then register store command expects value BEFORE regname */

#define MO_REGISTER_VALUE_FIRST 0x1000

/* If set, then the monitor displays registers as pairs.  */

#define MO_32_REGS_PAIRED 0x2000

/* If set, then register setting happens interactively.  */

#define MO_SETREG_INTERACTIVE 0x4000

/* If set, then memory setting happens interactively.  */

#define MO_SETMEM_INTERACTIVE 0x8000

/* If set, then memory dumps are always on 16-byte boundaries, even
   when less is desired.  */

#define MO_GETMEM_16_BOUNDARY 0x10000

/* If set, then the monitor numbers its breakpoints starting from 1.  */

#define MO_CLR_BREAK_1_BASED 0x20000

/* If set, then the monitor acks srecords with a plus sign.  */

#define MO_SREC_ACK_PLUS 0x40000

/* If set, then the monitor "acks" srecords with rotating lines.  */

#define MO_SREC_ACK_ROTATE 0x80000

/* If set, then remove useless address bits from memory addresses.  */

#define MO_ADDR_BITS_REMOVE 0x100000

/* If set, then display target program output if prefixed by ^O.  */

#define MO_PRINT_PROGRAM_OUTPUT 0x200000

/* Some dump bytes commands align the first data with the preceeding
   16 byte boundary. Some print blanks and start at the exactly the
   requested boundary. */

#define MO_EXACT_DUMPADDR 0x400000

/* Rather entering and exiting the write memory dialog for each word byte,
   we can save time by transferring the whole block without exiting
   the memory editing mode. You only need to worry about this
   if you are doing memory downloading.
   This engages a new write function registered with dcache.
 */
#define MO_HAS_BLOCKWRITES 0x800000

#define SREC_SIZE 160

extern void monitor_open (char *args, struct monitor_ops *ops, int from_tty);
extern void monitor_close (int quitting);
extern char *monitor_supply_register (int regno, char *valstr);
extern int monitor_expect (char *prompt, char *buf, int buflen);
extern int monitor_expect_prompt (char *buf, int buflen);
/* Note: The variable argument functions monitor_printf and
   monitor_printf_noecho vararg do not take take standard format style
   arguments.  Instead they take custom formats interpretered directly
   by monitor_vsprintf.  */
extern void monitor_printf (char *, ...);
extern void monitor_printf_noecho (char *, ...);
extern void monitor_write (char *buf, int buflen);
extern int monitor_readchar (void);
extern char *monitor_get_dev_name (void);
extern void init_monitor_ops (struct target_ops *);
extern int monitor_dump_reg_block (char *dump_cmd);

#endif
Commit	Line	Data
c906108c	1	/* Definitions for remote debugging interface for ROM monitors.
6aba47ca DJ	2	Copyright (C) 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
6aba47ca DJ	3	2007 Free Software Foundation, Inc.
c5aa993b JM	4	Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
c5aa993b JM	5
c906108c	6	This file is part of GDB.
c5aa993b	7
c906108c SS	8	This program is free software; you can redistribute it and/or modify
	9	it under the terms of the GNU General Public License as published by
	10	the Free Software Foundation; either version 2 of the License, or
	11	(at your option) any later version.
c5aa993b	12
c906108c SS	13	This program is distributed in the hope that it will be useful,
	14	but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	GNU General Public License for more details.
c5aa993b	17
c906108c SS	18	You should have received a copy of the GNU General Public License
c906108c SS	19	along with this program; if not, write to the Free Software
197e01b6 EZ	20	Foundation, Inc., 51 Franklin Street, Fifth Floor,
197e01b6 EZ	21	Boston, MA 02110-1301, USA.
c5aa993b	22	*/
c906108c	23
17732724 AC	24	#ifndef MONITOR_H
	25	#define MONITOR_H
	26
da3331ec	27	struct target_waitstatus;
ba3a8523	28	struct serial;
c906108c SS	29
	30	/* This structure describes the strings necessary to give small command
	31	sequences to the monitor, and parse the response.
	32
	33	CMD is the actual command typed at the monitor. Usually this has
	34	embedded sequences ala printf, which are substituted with the
	35	arguments appropriate to that type of command. Ie: to examine a
	36	register, we substitute the register name for the first arg. To
	37	modify memory, we substitute the memory location and the new
	38	contents for the first and second args, etc...
	39
	40	RESP_DELIM used to home in on the response string, and is used to
	41	disambiguate the answer within the pile of text returned by the
	42	monitor. This should be a unique string that immediately precedes
	43	the answer. Ie: if your monitor prints out `PC: 00000001= ' in
	44	response to asking for the PC, you should use `: ' as the
	45	RESP_DELIM. RESP_DELIM may be NULL if the res- ponse is going to
	46	be ignored, or has no particular leading text.
	47
	48	TERM is the string that the monitor outputs to indicate that it is
	49	idle, and waiting for input. This is usually a prompt of some
	50	sort. In the previous example, it would be `= '. It is important
	51	that TERM really means that the monitor is idle, otherwise GDB may
	52	try to type at it when it isn't ready for input. This is a problem
	53	because many monitors cannot deal with type-ahead. TERM may be
	54	NULL if the normal prompt is output.
	55
	56	TERM_CMD is used to quit out of the subcommand mode and get back to
	57	the main prompt. TERM_CMD may be NULL if it isn't necessary. It
	58	will also be ignored if TERM is NULL. */
	59
	60	struct memrw_cmd
c5aa993b JM	61	{
	62	char cmdb; / Command to send for byte read/write */
	63	char cmdw; / Command for word (16 bit) read/write */
	64	char cmdl; / Command for long (32 bit) read/write */
	65	char cmdll; / Command for long long (64 bit) read/write */
	66	char resp_delim; / String just prior to the desired value */
	67	char term; / Terminating string to search for */
	68	char term_cmd; / String to get out of sub-mode (if necessary) */
	69	};
c906108c SS	70
c906108c SS	71	struct regrw_cmd
c5aa993b JM	72	{
	73	char cmd; / Command to send for reg read/write */
	74	char resp_delim; / String (actually a regexp if getmem) just
c906108c	75	prior to the desired value */
c5aa993b JM	76	char term; / Terminating string to search for */
	77	char term_cmd; / String to get out of sub-mode (if necessary) */
	78	};
c906108c SS	79
c906108c SS	80	struct monitor_ops
c5aa993b JM	81	{
	82	int flags; /* See below */
	83	char *init; / List of init commands. NULL terminated. */
	84	char cont; / continue command */
	85	char step; / single step */
	86	char stop; / Interrupt program string */
	87	char set_break; / set a breakpoint. If NULL, monitor implementation
9e086581	88	sets its own to_insert_breakpoint method. */
c5aa993b JM	89	char clr_break; / clear a breakpoint */
	90	char clr_all_break; / Clear all breakpoints */
	91	char fill; / Memory fill cmd (addr len val) */
	92	struct memrw_cmd setmem; /* set memory to a value */
	93	struct memrw_cmd getmem; /* display memory */
	94	struct regrw_cmd setreg; /* set a register */
	95	struct regrw_cmd getreg; /* get a register */
	96	/* Some commands can dump a bunch of registers
	97	at once. This comes as a set of REG=VAL
	98	pairs. This should be called for each pair
	99	of registers that we can parse to supply
	100	GDB with the value of a register. */
	101	char dump_registers; / Command to dump all regs at once */
	102	char register_pattern; / Pattern that picks out register from reg dump */
507f3c78	103	void (supply_register) (char name, int namelen, char *val, int vallen);
ba3a8523	104	void (load_routine) (struct serial desc, char *file,
dee8b1a1 KB	105	int hashmark); /* Download routine */
	106	int (dumpregs) (void); / routine to dump all registers */
	107	int (continue_hook) (void); / Emit the continue command */
507f3c78 KB	108	int (wait_filter) (char buf, /* Maybe contains registers */
	109	int bufmax,
	110	int *response_length,
	111	struct target_waitstatus * status);
c5aa993b JM	112	char load; / load command */
	113	char loadresp; / Response to load command */
	114	char prompt; / monitor command prompt */
	115	char line_term; / end-of-command delimitor */
	116	char cmd_end; / optional command terminator */
	117	struct target_ops target; / target operations */
	118	int stopbits; /* number of stop bits */
	119	char *regnames; / array of register names in ascii */
1c617db8 GS	120	/* deprecated: use regname instead */
	121	const char (regname) (int index);
	122	/* function for dynamic regname array */
c5aa993b	123	int num_breakpoints; /* If set_break != NULL, number of supported
9e086581	124	breakpoints */
c5aa993b JM	125	int magic; /* Check value */
c5aa993b JM	126	};
c906108c SS	127
	128	/* The monitor ops magic number, used to detect if an ops structure doesn't
	129	have the right number of entries filled in. */
	130
	131	#define MONITOR_OPS_MAGIC 600925
	132
	133	/* Flag definitions. */
	134
	135	/* If set, then clear breakpoint command uses address, otherwise it
	136	uses an index returned by the monitor. */
	137
	138	#define MO_CLR_BREAK_USES_ADDR 0x1
	139
	140	/* If set, then memory fill command uses STARTADDR, ENDADDR+1, VALUE
	141	as args, else it uses STARTADDR, LENGTH, VALUE as args. */
	142
	143	#define MO_FILL_USES_ADDR 0x2
	144
	145	/* If set, then monitor doesn't automatically supply register dump
	146	when coming back after a continue. */
	147
	148	#define MO_NEED_REGDUMP_AFTER_CONT 0x4
	149
	150	/* getmem needs start addr and end addr */
	151
	152	#define MO_GETMEM_NEEDS_RANGE 0x8
	153
	154	/* getmem can only read one loc at a time */
	155
	156	#define MO_GETMEM_READ_SINGLE 0x10
	157
	158	/* handle \r\n combinations */
	159
	160	#define MO_HANDLE_NL 0x20
	161
	162	/* don't expect echos in monitor_open */
	163
	164	#define MO_NO_ECHO_ON_OPEN 0x40
	165
	166	/* If set, send break to stop monitor */
	167
	168	#define MO_SEND_BREAK_ON_STOP 0x80
	169
	170	/* If set, target sends an ACK after each S-record */
	171
	172	#define MO_SREC_ACK 0x100
	173
	174	/* Allow 0x prefix on addresses retured from monitor */
	175
	176	#define MO_HEX_PREFIX 0x200
	177
	178	/* Some monitors require a different command when starting a program */
	179
	180	#define MO_RUN_FIRST_TIME 0x400
	181
	182	/* Don't expect echos when getting memory */
	183
	184	#define MO_NO_ECHO_ON_SETMEM 0x800
	185
	186	/* If set, then register store command expects value BEFORE regname */
	187
	188	#define MO_REGISTER_VALUE_FIRST 0x1000
	189
	190	/* If set, then the monitor displays registers as pairs. */
191
192	#define MO_32_REGS_PAIRED 0x2000
193
194	/* If set, then register setting happens interactively. */
195
196	#define MO_SETREG_INTERACTIVE 0x4000
197
198	/* If set, then memory setting happens interactively. */
199
200	#define MO_SETMEM_INTERACTIVE 0x8000
201
202	/* If set, then memory dumps are always on 16-byte boundaries, even
203	when less is desired. */
204
205	#define MO_GETMEM_16_BOUNDARY 0x10000
206
207	/* If set, then the monitor numbers its breakpoints starting from 1. */
208
209	#define MO_CLR_BREAK_1_BASED 0x20000
210
211	/* If set, then the monitor acks srecords with a plus sign. */
212
213	#define MO_SREC_ACK_PLUS 0x40000
214
215	/* If set, then the monitor "acks" srecords with rotating lines. */
216
217	#define MO_SREC_ACK_ROTATE 0x80000
218
219	/* If set, then remove useless address bits from memory addresses. */
220
221	#define MO_ADDR_BITS_REMOVE 0x100000
222
223	/* If set, then display target program output if prefixed by ^O. */
224
225	#define MO_PRINT_PROGRAM_OUTPUT 0x200000
226
227	/* Some dump bytes commands align the first data with the preceeding
c5aa993b JM	228	16 byte boundary. Some print blanks and start at the exactly the
c5aa993b JM	229	requested boundary. */
c906108c SS	230
	231	#define MO_EXACT_DUMPADDR 0x400000
	232
	233	/* Rather entering and exiting the write memory dialog for each word byte,
	234	we can save time by transferring the whole block without exiting
	235	the memory editing mode. You only need to worry about this
	236	if you are doing memory downloading.
	237	This engages a new write function registered with dcache.
c5aa993b	238	*/
c906108c SS	239	#define MO_HAS_BLOCKWRITES 0x800000
	240
	241	#define SREC_SIZE 160
	242
a14ed312 KB	243	extern void monitor_open (char args, struct monitor_ops ops, int from_tty);
	244	extern void monitor_close (int quitting);
	245	extern char monitor_supply_register (int regno, char valstr);
	246	extern int monitor_expect (char prompt, char buf, int buflen);
	247	extern int monitor_expect_prompt (char *buf, int buflen);
ab4e3d93 AC	248	/* Note: The variable argument functions monitor_printf and
	249	monitor_printf_noecho vararg do not take take standard format style
	250	arguments. Instead they take custom formats interpretered directly
	251	by monitor_vsprintf. */
	252	extern void monitor_printf (char *, ...);
	253	extern void monitor_printf_noecho (char *, ...);
a14ed312 KB	254	extern void monitor_write (char *buf, int buflen);
	255	extern int monitor_readchar (void);
	256	extern char *monitor_get_dev_name (void);
	257	extern void init_monitor_ops (struct target_ops *);
	258	extern int monitor_dump_reg_block (char *dump_cmd);
17732724 AC	259
17732724 AC	260	#endif