[deliverable/binutils-gdb.git] / gdb / ocd.h

/* Definitions for the Macraigor Systems BDM Wiggler
   Copyright 1996, 1997 Free Software Foundation, Inc.

This file is part of GDB.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

#ifndef OCD_H
#define OCD_H

/* Wiggler serial protocol definitions */

#define DLE 020			/* Quote char */
#define SYN 026			/* Start of packet */
#define RAW_SYN ((026 << 8) | 026) /* get_quoted_char found a naked SYN */

/* Status flags */

#define OCD_FLAG_RESET 0x01	/* Target is being reset */
#define OCD_FLAG_STOPPED 0x02	/* Target is halted */
#define OCD_FLAG_BDM 0x04	/* Target is in BDM */
#define OCD_FLAG_PWF 0x08	/* Power failed */
#define OCD_FLAG_CABLE_DISC 0x10 /* BDM cable disconnected */

/* Commands */

#define OCD_AYT 0x0		/* Are you there? */
#define OCD_GET_VERSION 0x1	/* Get Version */
#define OCD_SET_BAUD_RATE 0x2	/* Set Baud Rate */
#define OCD_INIT 0x10		/* Initialize Wiggler */
#define OCD_SET_SPEED 0x11	/* Set Speed */
#define OCD_GET_STATUS_MASK 0x12 /* Get Status Mask */
#define OCD_GET_CTRS 0x13	/* Get Error Counters */
#define OCD_SET_FUNC_CODE 0x14	/* Set Function Code */
#define OCD_SET_CTL_FLAGS 0x15	/* Set Control Flags */
#define OCD_SET_BUF_ADDR 0x16	/* Set Register Buffer Address */
#define OCD_RUN 0x20		/* Run Target from PC */
#define OCD_RUN_ADDR 0x21	/* Run Target from Specified Address */
#define OCD_STOP 0x22		/* Stop Target */
#define OCD_RESET_RUN 0x23	/* Reset Target and Run */
#define OCD_RESET 0x24		/* Reset Target and Halt */
#define OCD_STEP 0x25		/* Single step */
#define OCD_READ_REGS 0x30	/* Read Registers */
#define OCD_WRITE_REGS 0x31	/* Write Registers */
#define OCD_READ_MEM 0x32	/* Read Memory */
#define OCD_WRITE_MEM 0x33	/* Write Memory */
#define OCD_FILL_MEM 0x34	/* Fill Memory */
#define OCD_MOVE_MEM 0x35	/* Move Memory */

#define OCD_READ_INT_MEM 0x80	/* Read Internal Memory */
#define OCD_WRITE_INT_MEM 0x81	/* Write Internal Memory */
#define OCD_JUMP 0x82		/* Jump to Subroutine */

#define OCD_ERASE_FLASH 0x90	/* Erase flash memory */
#define OCD_PROGRAM_FLASH 0x91	/* Write flash memory */
#define OCD_EXIT_MON 0x93	/* Exit the flash programming monitor  */
#define OCD_ENTER_MON 0x94	/* Enter the flash programming monitor  */

#define OCD_SET_STATUS 0x0a	/* Set status */
#define OCD_SET_CONNECTION 0xf0	/* Set connection (init Wigglers.dll) */
#define OCD_LOG_FILE 0xf1	/* Cmd to get Wigglers.dll to log cmds */
#define OCD_FLAG_STOP 0x0	/* Stop the target, enter BDM */
#define OCD_FLAG_START 0x01	/* Start the target at PC */
#define OCD_FLAG_RETURN_STATUS 0x04 /* Return async status */

/* Target type (for OCD_INIT command) */

enum ocd_target_type {
  OCD_TARGET_CPU32=0x0,		/* Moto cpu32 family */
  OCD_TARGET_CPU16=0x1,
  OCD_TARGET_MOTO_PPC=0x2,	/* Motorola PPC 5xx/8xx */
  OCD_TARGET_IBM_PPC=0x3};	/* IBM PPC 4xx */

void ocd_open PARAMS ((char *name, int from_tty, enum ocd_target_type,
			   struct target_ops *ops));

void ocd_close PARAMS ((int quitting));

void ocd_detach PARAMS ((char *args, int from_tty));

void ocd_resume PARAMS ((int pid, int step, enum target_signal siggnal));

void ocd_prepare_to_store PARAMS ((void));

void ocd_stop PARAMS ((void));

void ocd_files_info PARAMS ((struct target_ops *ignore));


int ocd_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
				 int len, int should_write,
				 struct target_ops *target));

void ocd_mourn PARAMS ((void));

void ocd_create_inferior PARAMS ((char *exec_file,
				      char *args,
				      char **env));

int ocd_thread_alive PARAMS ((int th));

void ocd_error PARAMS ((char *s, int error_code));

void ocd_kill PARAMS ((void));

void ocd_load PARAMS((char *args, int from_tty));

unsigned char * ocd_read_bdm_registers PARAMS ((int first_bdm_regno,
						    int last_bdm_regno,
						    int *reglen));

CORE_ADDR ocd_read_bdm_register PARAMS ((int bdm_regno));

void ocd_write_bdm_registers PARAMS ((int first_bdm_regno,
					  unsigned char *regptr,
					  int reglen));

void ocd_write_bdm_register PARAMS ((int bdm_regno, CORE_ADDR reg));

int ocd_wait PARAMS ((void));

int ocd_insert_breakpoint PARAMS ((CORE_ADDR addr, char *contents_cache));
int ocd_remove_breakpoint PARAMS ((CORE_ADDR addr, char *contents_cache));

int ocd_write_bytes PARAMS ((CORE_ADDR memaddr, char *myaddr, int len));

#endif /* OCD_H */
Commit	Line	Data
c906108c SS	1	/* Definitions for the Macraigor Systems BDM Wiggler
	2	Copyright 1996, 1997 Free Software Foundation, Inc.
	3
	4	This file is part of GDB.
	5
	6	This program is free software; you can redistribute it and/or modify
	7	it under the terms of the GNU General Public License as published by
	8	the Free Software Foundation; either version 2 of the License, or
	9	(at your option) any later version.
	10
	11	This program is distributed in the hope that it will be useful,
	12	but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	GNU General Public License for more details.
	15
	16	You should have received a copy of the GNU General Public License
	17	along with this program; if not, write to the Free Software
	18	Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
	19
	20	#ifndef OCD_H
	21	#define OCD_H
	22
	23	/* Wiggler serial protocol definitions */
	24
	25	#define DLE 020 /* Quote char */
	26	#define SYN 026 /* Start of packet */
	27	#define RAW_SYN ((026 << 8) \| 026) /* get_quoted_char found a naked SYN */
	28
	29	/* Status flags */
	30
	31	#define OCD_FLAG_RESET 0x01 /* Target is being reset */
	32	#define OCD_FLAG_STOPPED 0x02 /* Target is halted */
	33	#define OCD_FLAG_BDM 0x04 /* Target is in BDM */
	34	#define OCD_FLAG_PWF 0x08 /* Power failed */
	35	#define OCD_FLAG_CABLE_DISC 0x10 /* BDM cable disconnected */
	36
	37	/* Commands */
	38
	39	#define OCD_AYT 0x0 /* Are you there? */
	40	#define OCD_GET_VERSION 0x1 /* Get Version */
	41	#define OCD_SET_BAUD_RATE 0x2 /* Set Baud Rate */
	42	#define OCD_INIT 0x10 /* Initialize Wiggler */
	43	#define OCD_SET_SPEED 0x11 /* Set Speed */
	44	#define OCD_GET_STATUS_MASK 0x12 /* Get Status Mask */
	45	#define OCD_GET_CTRS 0x13 /* Get Error Counters */
	46	#define OCD_SET_FUNC_CODE 0x14 /* Set Function Code */
	47	#define OCD_SET_CTL_FLAGS 0x15 /* Set Control Flags */
	48	#define OCD_SET_BUF_ADDR 0x16 /* Set Register Buffer Address */
	49	#define OCD_RUN 0x20 /* Run Target from PC */
	50	#define OCD_RUN_ADDR 0x21 /* Run Target from Specified Address */
	51	#define OCD_STOP 0x22 /* Stop Target */
	52	#define OCD_RESET_RUN 0x23 /* Reset Target and Run */
	53	#define OCD_RESET 0x24 /* Reset Target and Halt */
	54	#define OCD_STEP 0x25 /* Single step */
	55	#define OCD_READ_REGS 0x30 /* Read Registers */
	56	#define OCD_WRITE_REGS 0x31 /* Write Registers */
	57	#define OCD_READ_MEM 0x32 /* Read Memory */
	58	#define OCD_WRITE_MEM 0x33 /* Write Memory */
	59	#define OCD_FILL_MEM 0x34 /* Fill Memory */
	60	#define OCD_MOVE_MEM 0x35 /* Move Memory */
	61
	62	#define OCD_READ_INT_MEM 0x80 /* Read Internal Memory */
	63	#define OCD_WRITE_INT_MEM 0x81 /* Write Internal Memory */
	64	#define OCD_JUMP 0x82 /* Jump to Subroutine */
65
66	#define OCD_ERASE_FLASH 0x90 /* Erase flash memory */
67	#define OCD_PROGRAM_FLASH 0x91 /* Write flash memory */
68	#define OCD_EXIT_MON 0x93 /* Exit the flash programming monitor */
69	#define OCD_ENTER_MON 0x94 /* Enter the flash programming monitor */
70
71	#define OCD_SET_STATUS 0x0a /* Set status */
72	#define OCD_SET_CONNECTION 0xf0 /* Set connection (init Wigglers.dll) */
73	#define OCD_LOG_FILE 0xf1 /* Cmd to get Wigglers.dll to log cmds */
74	#define OCD_FLAG_STOP 0x0 /* Stop the target, enter BDM */
75	#define OCD_FLAG_START 0x01 /* Start the target at PC */
76	#define OCD_FLAG_RETURN_STATUS 0x04 /* Return async status */
77
78	/* Target type (for OCD_INIT command) */
79
80	enum ocd_target_type {
81	OCD_TARGET_CPU32=0x0, /* Moto cpu32 family */
82	OCD_TARGET_CPU16=0x1,
83	OCD_TARGET_MOTO_PPC=0x2, /* Motorola PPC 5xx/8xx */
84	OCD_TARGET_IBM_PPC=0x3}; /* IBM PPC 4xx */
85
86	void ocd_open PARAMS ((char *name, int from_tty, enum ocd_target_type,
87	struct target_ops *ops));
88
89	void ocd_close PARAMS ((int quitting));
90
91	void ocd_detach PARAMS ((char *args, int from_tty));
92
93	void ocd_resume PARAMS ((int pid, int step, enum target_signal siggnal));
94
95	void ocd_prepare_to_store PARAMS ((void));
96
97	void ocd_stop PARAMS ((void));
98
99	void ocd_files_info PARAMS ((struct target_ops *ignore));
100
101
102	int ocd_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
103	int len, int should_write,
104	struct target_ops *target));
105
106	void ocd_mourn PARAMS ((void));
107
108	void ocd_create_inferior PARAMS ((char *exec_file,
109	char *args,
110	char **env));
111
112	int ocd_thread_alive PARAMS ((int th));
113
114	void ocd_error PARAMS ((char *s, int error_code));
115
116	void ocd_kill PARAMS ((void));
117
118	void ocd_load PARAMS((char *args, int from_tty));
119
120	unsigned char * ocd_read_bdm_registers PARAMS ((int first_bdm_regno,
121	int last_bdm_regno,
122	int *reglen));
123
124	CORE_ADDR ocd_read_bdm_register PARAMS ((int bdm_regno));
125
126	void ocd_write_bdm_registers PARAMS ((int first_bdm_regno,
127	unsigned char *regptr,
128	int reglen));
129
130	void ocd_write_bdm_register PARAMS ((int bdm_regno, CORE_ADDR reg));
131
132	int ocd_wait PARAMS ((void));
133
134	int ocd_insert_breakpoint PARAMS ((CORE_ADDR addr, char *contents_cache));
135	int ocd_remove_breakpoint PARAMS ((CORE_ADDR addr, char *contents_cache));
136
137	int ocd_write_bytes PARAMS ((CORE_ADDR memaddr, char *myaddr, int len));
138
139	#endif /* OCD_H */