Commit | Line | Data |
---|---|---|
70100014 UW |
1 | /* Floating point routines for GDB, the GNU debugger. |
2 | ||
3 | Copyright (C) 2017 Free Software Foundation, Inc. | |
4 | ||
5 | This file is part of GDB. | |
6 | ||
7 | This program is free software; you can redistribute it and/or modify | |
8 | it under the terms of the GNU General Public License as published by | |
9 | the Free Software Foundation; either version 3 of the License, or | |
10 | (at your option) any later version. | |
11 | ||
12 | This program is distributed in the hope that it will be useful, | |
13 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | GNU General Public License for more details. | |
16 | ||
17 | You should have received a copy of the GNU General Public License | |
18 | along with this program. If not, see <http://www.gnu.org/licenses/>. */ | |
19 | ||
20 | #include "defs.h" | |
70100014 UW |
21 | #include "gdbtypes.h" |
22 | #include "floatformat.h" | |
23 | #include "target-float.h" | |
24 | ||
25 | ||
7a26362d | 26 | /* Target floating-point operations. |
50637b26 | 27 | |
7a26362d UW |
28 | We provide multiple implementations of those operations, which differ |
29 | by the host-side intermediate format they perform computations in. | |
66c02b9e | 30 | |
7a26362d UW |
31 | Those multiple implementations all derive from the following abstract |
32 | base class, which specifies the set of operations to be implemented. */ | |
33 | ||
34 | class target_float_ops | |
35 | { | |
36 | public: | |
37 | virtual std::string to_string (const gdb_byte *addr, const struct type *type, | |
38 | const char *format) const = 0; | |
39 | virtual bool from_string (gdb_byte *addr, const struct type *type, | |
40 | const std::string &string) const = 0; | |
41 | ||
42 | virtual LONGEST to_longest (const gdb_byte *addr, | |
43 | const struct type *type) const = 0; | |
44 | virtual void from_longest (gdb_byte *addr, const struct type *type, | |
45 | LONGEST val) const = 0; | |
46 | virtual void from_ulongest (gdb_byte *addr, const struct type *type, | |
47 | ULONGEST val) const = 0; | |
48 | virtual double to_host_double (const gdb_byte *addr, | |
49 | const struct type *type) const = 0; | |
50 | virtual void from_host_double (gdb_byte *addr, const struct type *type, | |
51 | double val) const = 0; | |
52 | virtual void convert (const gdb_byte *from, const struct type *from_type, | |
53 | gdb_byte *to, const struct type *to_type) const = 0; | |
54 | ||
55 | virtual void binop (enum exp_opcode opcode, | |
56 | const gdb_byte *x, const struct type *type_x, | |
57 | const gdb_byte *y, const struct type *type_y, | |
58 | gdb_byte *res, const struct type *type_res) const = 0; | |
59 | virtual int compare (const gdb_byte *x, const struct type *type_x, | |
60 | const gdb_byte *y, const struct type *type_y) const = 0; | |
61 | }; | |
62 | ||
63 | ||
64 | /* Helper routines operating on binary floating-point data. */ | |
65 | ||
66 | #include <cmath> | |
67 | #include <limits> | |
1cfb73db UW |
68 | |
69 | /* Different kinds of floatformat numbers recognized by | |
70 | floatformat_classify. To avoid portability issues, we use local | |
71 | values instead of the C99 macros (FP_NAN et cetera). */ | |
72 | enum float_kind { | |
73 | float_nan, | |
74 | float_infinite, | |
75 | float_zero, | |
76 | float_normal, | |
77 | float_subnormal | |
78 | }; | |
79 | ||
80 | /* The odds that CHAR_BIT will be anything but 8 are low enough that I'm not | |
81 | going to bother with trying to muck around with whether it is defined in | |
82 | a system header, what we do if not, etc. */ | |
83 | #define FLOATFORMAT_CHAR_BIT 8 | |
84 | ||
85 | /* The number of bytes that the largest floating-point type that we | |
86 | can convert to doublest will need. */ | |
87 | #define FLOATFORMAT_LARGEST_BYTES 16 | |
88 | ||
89 | /* Return the floatformat's total size in host bytes. */ | |
90 | static size_t | |
91 | floatformat_totalsize_bytes (const struct floatformat *fmt) | |
92 | { | |
93 | return ((fmt->totalsize + FLOATFORMAT_CHAR_BIT - 1) | |
94 | / FLOATFORMAT_CHAR_BIT); | |
95 | } | |
96 | ||
97 | /* Return the precision of the floating point format FMT. */ | |
98 | static int | |
99 | floatformat_precision (const struct floatformat *fmt) | |
100 | { | |
101 | /* Assume the precision of and IBM long double is twice the precision | |
102 | of the underlying double. This matches what GCC does. */ | |
103 | if (fmt->split_half) | |
104 | return 2 * floatformat_precision (fmt->split_half); | |
105 | ||
106 | /* Otherwise, the precision is the size of mantissa in bits, | |
107 | including the implicit bit if present. */ | |
108 | int prec = fmt->man_len; | |
109 | if (fmt->intbit == floatformat_intbit_no) | |
110 | prec++; | |
111 | ||
112 | return prec; | |
113 | } | |
114 | ||
115 | /* Normalize the byte order of FROM into TO. If no normalization is | |
116 | needed then FMT->byteorder is returned and TO is not changed; | |
117 | otherwise the format of the normalized form in TO is returned. */ | |
118 | static enum floatformat_byteorders | |
119 | floatformat_normalize_byteorder (const struct floatformat *fmt, | |
120 | const void *from, void *to) | |
121 | { | |
122 | const unsigned char *swapin; | |
123 | unsigned char *swapout; | |
124 | int words; | |
125 | ||
126 | if (fmt->byteorder == floatformat_little | |
127 | || fmt->byteorder == floatformat_big) | |
128 | return fmt->byteorder; | |
129 | ||
130 | words = fmt->totalsize / FLOATFORMAT_CHAR_BIT; | |
131 | words >>= 2; | |
132 | ||
133 | swapout = (unsigned char *)to; | |
134 | swapin = (const unsigned char *)from; | |
135 | ||
136 | if (fmt->byteorder == floatformat_vax) | |
137 | { | |
138 | while (words-- > 0) | |
139 | { | |
140 | *swapout++ = swapin[1]; | |
141 | *swapout++ = swapin[0]; | |
142 | *swapout++ = swapin[3]; | |
143 | *swapout++ = swapin[2]; | |
144 | swapin += 4; | |
145 | } | |
146 | /* This may look weird, since VAX is little-endian, but it is | |
147 | easier to translate to big-endian than to little-endian. */ | |
148 | return floatformat_big; | |
149 | } | |
150 | else | |
151 | { | |
152 | gdb_assert (fmt->byteorder == floatformat_littlebyte_bigword); | |
153 | ||
154 | while (words-- > 0) | |
155 | { | |
156 | *swapout++ = swapin[3]; | |
157 | *swapout++ = swapin[2]; | |
158 | *swapout++ = swapin[1]; | |
159 | *swapout++ = swapin[0]; | |
160 | swapin += 4; | |
161 | } | |
162 | return floatformat_big; | |
163 | } | |
164 | } | |
165 | ||
166 | /* Extract a field which starts at START and is LEN bytes long. DATA and | |
167 | TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */ | |
168 | static unsigned long | |
169 | get_field (const bfd_byte *data, enum floatformat_byteorders order, | |
170 | unsigned int total_len, unsigned int start, unsigned int len) | |
171 | { | |
172 | unsigned long result; | |
173 | unsigned int cur_byte; | |
174 | int cur_bitshift; | |
175 | ||
176 | /* Caller must byte-swap words before calling this routine. */ | |
177 | gdb_assert (order == floatformat_little || order == floatformat_big); | |
178 | ||
179 | /* Start at the least significant part of the field. */ | |
180 | if (order == floatformat_little) | |
181 | { | |
182 | /* We start counting from the other end (i.e, from the high bytes | |
183 | rather than the low bytes). As such, we need to be concerned | |
184 | with what happens if bit 0 doesn't start on a byte boundary. | |
185 | I.e, we need to properly handle the case where total_len is | |
186 | not evenly divisible by 8. So we compute ``excess'' which | |
187 | represents the number of bits from the end of our starting | |
188 | byte needed to get to bit 0. */ | |
189 | int excess = FLOATFORMAT_CHAR_BIT - (total_len % FLOATFORMAT_CHAR_BIT); | |
190 | ||
191 | cur_byte = (total_len / FLOATFORMAT_CHAR_BIT) | |
192 | - ((start + len + excess) / FLOATFORMAT_CHAR_BIT); | |
193 | cur_bitshift = ((start + len + excess) % FLOATFORMAT_CHAR_BIT) | |
194 | - FLOATFORMAT_CHAR_BIT; | |
195 | } | |
196 | else | |
197 | { | |
198 | cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT; | |
199 | cur_bitshift = | |
200 | ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT; | |
201 | } | |
202 | if (cur_bitshift > -FLOATFORMAT_CHAR_BIT) | |
203 | result = *(data + cur_byte) >> (-cur_bitshift); | |
204 | else | |
205 | result = 0; | |
206 | cur_bitshift += FLOATFORMAT_CHAR_BIT; | |
207 | if (order == floatformat_little) | |
208 | ++cur_byte; | |
209 | else | |
210 | --cur_byte; | |
211 | ||
212 | /* Move towards the most significant part of the field. */ | |
213 | while (cur_bitshift < len) | |
214 | { | |
215 | result |= (unsigned long)*(data + cur_byte) << cur_bitshift; | |
216 | cur_bitshift += FLOATFORMAT_CHAR_BIT; | |
217 | switch (order) | |
218 | { | |
219 | case floatformat_little: | |
220 | ++cur_byte; | |
221 | break; | |
222 | case floatformat_big: | |
223 | --cur_byte; | |
224 | break; | |
225 | } | |
226 | } | |
227 | if (len < sizeof(result) * FLOATFORMAT_CHAR_BIT) | |
228 | /* Mask out bits which are not part of the field. */ | |
229 | result &= ((1UL << len) - 1); | |
230 | return result; | |
231 | } | |
232 | ||
233 | /* Set a field which starts at START and is LEN bytes long. DATA and | |
234 | TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */ | |
235 | static void | |
236 | put_field (unsigned char *data, enum floatformat_byteorders order, | |
237 | unsigned int total_len, unsigned int start, unsigned int len, | |
238 | unsigned long stuff_to_put) | |
239 | { | |
240 | unsigned int cur_byte; | |
241 | int cur_bitshift; | |
242 | ||
243 | /* Caller must byte-swap words before calling this routine. */ | |
244 | gdb_assert (order == floatformat_little || order == floatformat_big); | |
245 | ||
246 | /* Start at the least significant part of the field. */ | |
247 | if (order == floatformat_little) | |
248 | { | |
249 | int excess = FLOATFORMAT_CHAR_BIT - (total_len % FLOATFORMAT_CHAR_BIT); | |
250 | ||
251 | cur_byte = (total_len / FLOATFORMAT_CHAR_BIT) | |
252 | - ((start + len + excess) / FLOATFORMAT_CHAR_BIT); | |
253 | cur_bitshift = ((start + len + excess) % FLOATFORMAT_CHAR_BIT) | |
254 | - FLOATFORMAT_CHAR_BIT; | |
255 | } | |
256 | else | |
257 | { | |
258 | cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT; | |
259 | cur_bitshift = | |
260 | ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT; | |
261 | } | |
262 | if (cur_bitshift > -FLOATFORMAT_CHAR_BIT) | |
263 | { | |
264 | *(data + cur_byte) &= | |
265 | ~(((1 << ((start + len) % FLOATFORMAT_CHAR_BIT)) - 1) | |
266 | << (-cur_bitshift)); | |
267 | *(data + cur_byte) |= | |
268 | (stuff_to_put & ((1 << FLOATFORMAT_CHAR_BIT) - 1)) << (-cur_bitshift); | |
269 | } | |
270 | cur_bitshift += FLOATFORMAT_CHAR_BIT; | |
271 | if (order == floatformat_little) | |
272 | ++cur_byte; | |
273 | else | |
274 | --cur_byte; | |
275 | ||
276 | /* Move towards the most significant part of the field. */ | |
277 | while (cur_bitshift < len) | |
278 | { | |
279 | if (len - cur_bitshift < FLOATFORMAT_CHAR_BIT) | |
280 | { | |
281 | /* This is the last byte. */ | |
282 | *(data + cur_byte) &= | |
283 | ~((1 << (len - cur_bitshift)) - 1); | |
284 | *(data + cur_byte) |= (stuff_to_put >> cur_bitshift); | |
285 | } | |
286 | else | |
287 | *(data + cur_byte) = ((stuff_to_put >> cur_bitshift) | |
288 | & ((1 << FLOATFORMAT_CHAR_BIT) - 1)); | |
289 | cur_bitshift += FLOATFORMAT_CHAR_BIT; | |
290 | if (order == floatformat_little) | |
291 | ++cur_byte; | |
292 | else | |
293 | --cur_byte; | |
294 | } | |
295 | } | |
296 | ||
297 | /* Check if VAL (which is assumed to be a floating point number whose | |
298 | format is described by FMT) is negative. */ | |
299 | static int | |
300 | floatformat_is_negative (const struct floatformat *fmt, | |
301 | const bfd_byte *uval) | |
302 | { | |
303 | enum floatformat_byteorders order; | |
304 | unsigned char newfrom[FLOATFORMAT_LARGEST_BYTES]; | |
305 | ||
306 | gdb_assert (fmt != NULL); | |
307 | gdb_assert (fmt->totalsize | |
308 | <= FLOATFORMAT_LARGEST_BYTES * FLOATFORMAT_CHAR_BIT); | |
309 | ||
310 | /* An IBM long double (a two element array of double) always takes the | |
311 | sign of the first double. */ | |
312 | if (fmt->split_half) | |
313 | fmt = fmt->split_half; | |
314 | ||
315 | order = floatformat_normalize_byteorder (fmt, uval, newfrom); | |
316 | ||
317 | if (order != fmt->byteorder) | |
318 | uval = newfrom; | |
319 | ||
320 | return get_field (uval, order, fmt->totalsize, fmt->sign_start, 1); | |
321 | } | |
322 | ||
323 | /* Check if VAL is "not a number" (NaN) for FMT. */ | |
324 | static enum float_kind | |
325 | floatformat_classify (const struct floatformat *fmt, | |
326 | const bfd_byte *uval) | |
327 | { | |
328 | long exponent; | |
329 | unsigned long mant; | |
330 | unsigned int mant_bits, mant_off; | |
331 | int mant_bits_left; | |
332 | enum floatformat_byteorders order; | |
333 | unsigned char newfrom[FLOATFORMAT_LARGEST_BYTES]; | |
334 | int mant_zero; | |
335 | ||
336 | gdb_assert (fmt != NULL); | |
337 | gdb_assert (fmt->totalsize | |
338 | <= FLOATFORMAT_LARGEST_BYTES * FLOATFORMAT_CHAR_BIT); | |
339 | ||
340 | /* An IBM long double (a two element array of double) can be classified | |
341 | by looking at the first double. inf and nan are specified as | |
342 | ignoring the second double. zero and subnormal will always have | |
343 | the second double 0.0 if the long double is correctly rounded. */ | |
344 | if (fmt->split_half) | |
345 | fmt = fmt->split_half; | |
346 | ||
347 | order = floatformat_normalize_byteorder (fmt, uval, newfrom); | |
348 | ||
349 | if (order != fmt->byteorder) | |
350 | uval = newfrom; | |
351 | ||
352 | exponent = get_field (uval, order, fmt->totalsize, fmt->exp_start, | |
353 | fmt->exp_len); | |
354 | ||
355 | mant_bits_left = fmt->man_len; | |
356 | mant_off = fmt->man_start; | |
357 | ||
358 | mant_zero = 1; | |
359 | while (mant_bits_left > 0) | |
360 | { | |
361 | mant_bits = std::min (mant_bits_left, 32); | |
362 | ||
363 | mant = get_field (uval, order, fmt->totalsize, mant_off, mant_bits); | |
364 | ||
365 | /* If there is an explicit integer bit, mask it off. */ | |
366 | if (mant_off == fmt->man_start | |
367 | && fmt->intbit == floatformat_intbit_yes) | |
368 | mant &= ~(1 << (mant_bits - 1)); | |
369 | ||
370 | if (mant) | |
371 | { | |
372 | mant_zero = 0; | |
373 | break; | |
374 | } | |
375 | ||
376 | mant_off += mant_bits; | |
377 | mant_bits_left -= mant_bits; | |
378 | } | |
379 | ||
380 | /* If exp_nan is not set, assume that inf, NaN, and subnormals are not | |
381 | supported. */ | |
382 | if (! fmt->exp_nan) | |
383 | { | |
384 | if (mant_zero) | |
385 | return float_zero; | |
386 | else | |
387 | return float_normal; | |
388 | } | |
389 | ||
390 | if (exponent == 0) | |
391 | { | |
392 | if (mant_zero) | |
393 | return float_zero; | |
394 | else | |
395 | return float_subnormal; | |
396 | } | |
397 | ||
398 | if (exponent == fmt->exp_nan) | |
399 | { | |
400 | if (mant_zero) | |
401 | return float_infinite; | |
402 | else | |
403 | return float_nan; | |
404 | } | |
405 | ||
406 | return float_normal; | |
407 | } | |
408 | ||
409 | /* Convert the mantissa of VAL (which is assumed to be a floating | |
410 | point number whose format is described by FMT) into a hexadecimal | |
411 | and store it in a static string. Return a pointer to that string. */ | |
412 | static const char * | |
413 | floatformat_mantissa (const struct floatformat *fmt, | |
414 | const bfd_byte *val) | |
415 | { | |
416 | unsigned char *uval = (unsigned char *) val; | |
417 | unsigned long mant; | |
418 | unsigned int mant_bits, mant_off; | |
419 | int mant_bits_left; | |
420 | static char res[50]; | |
421 | char buf[9]; | |
422 | int len; | |
423 | enum floatformat_byteorders order; | |
424 | unsigned char newfrom[FLOATFORMAT_LARGEST_BYTES]; | |
425 | ||
426 | gdb_assert (fmt != NULL); | |
427 | gdb_assert (fmt->totalsize | |
428 | <= FLOATFORMAT_LARGEST_BYTES * FLOATFORMAT_CHAR_BIT); | |
429 | ||
430 | /* For IBM long double (a two element array of double), return the | |
431 | mantissa of the first double. The problem with returning the | |
432 | actual mantissa from both doubles is that there can be an | |
433 | arbitrary number of implied 0's or 1's between the mantissas | |
434 | of the first and second double. In any case, this function | |
435 | is only used for dumping out nans, and a nan is specified to | |
436 | ignore the value in the second double. */ | |
437 | if (fmt->split_half) | |
438 | fmt = fmt->split_half; | |
439 | ||
440 | order = floatformat_normalize_byteorder (fmt, uval, newfrom); | |
441 | ||
442 | if (order != fmt->byteorder) | |
443 | uval = newfrom; | |
444 | ||
445 | if (! fmt->exp_nan) | |
446 | return 0; | |
447 | ||
448 | /* Make sure we have enough room to store the mantissa. */ | |
449 | gdb_assert (sizeof res > ((fmt->man_len + 7) / 8) * 2); | |
450 | ||
451 | mant_off = fmt->man_start; | |
452 | mant_bits_left = fmt->man_len; | |
453 | mant_bits = (mant_bits_left % 32) > 0 ? mant_bits_left % 32 : 32; | |
454 | ||
455 | mant = get_field (uval, order, fmt->totalsize, mant_off, mant_bits); | |
456 | ||
457 | len = xsnprintf (res, sizeof res, "%lx", mant); | |
458 | ||
459 | mant_off += mant_bits; | |
460 | mant_bits_left -= mant_bits; | |
461 | ||
462 | while (mant_bits_left > 0) | |
463 | { | |
464 | mant = get_field (uval, order, fmt->totalsize, mant_off, 32); | |
465 | ||
466 | xsnprintf (buf, sizeof buf, "%08lx", mant); | |
467 | gdb_assert (len + strlen (buf) <= sizeof res); | |
468 | strcat (res, buf); | |
469 | ||
470 | mant_off += 32; | |
471 | mant_bits_left -= 32; | |
472 | } | |
473 | ||
474 | return res; | |
475 | } | |
476 | ||
7a26362d UW |
477 | /* Convert printf format string FORMAT to the otherwise equivalent string |
478 | which may be used to print a host floating-point number using the length | |
479 | modifier LENGTH (which may be 0 if none is needed). If FORMAT is null, | |
480 | return a format appropriate to print the full precision of a target | |
481 | floating-point number of format FMT. */ | |
482 | static std::string | |
483 | floatformat_printf_format (const struct floatformat *fmt, | |
484 | const char *format, char length) | |
485 | { | |
486 | std::string host_format; | |
487 | char conversion; | |
488 | ||
489 | if (format == nullptr) | |
490 | { | |
491 | /* If no format was specified, print the number using a format string | |
492 | where the precision is set to the DECIMAL_DIG value for the given | |
493 | floating-point format. This value is computed as | |
494 | ||
495 | ceil(1 + p * log10(b)), | |
496 | ||
497 | where p is the precision of the floating-point format in bits, and | |
498 | b is the base (which is always 2 for the formats we support). */ | |
499 | const double log10_2 = .30102999566398119521; | |
500 | double d_decimal_dig = 1 + floatformat_precision (fmt) * log10_2; | |
501 | int decimal_dig = d_decimal_dig; | |
502 | if (decimal_dig < d_decimal_dig) | |
503 | decimal_dig++; | |
504 | ||
505 | host_format = string_printf ("%%.%d", decimal_dig); | |
506 | conversion = 'g'; | |
507 | } | |
508 | else | |
509 | { | |
510 | /* Use the specified format, stripping out the conversion character | |
511 | and length modifier, if present. */ | |
512 | size_t len = strlen (format); | |
513 | gdb_assert (len > 1); | |
514 | conversion = format[--len]; | |
515 | gdb_assert (conversion == 'e' || conversion == 'f' || conversion == 'g' | |
516 | || conversion == 'E' || conversion == 'G'); | |
517 | if (format[len - 1] == 'L') | |
518 | len--; | |
519 | ||
520 | host_format = std::string (format, len); | |
521 | } | |
522 | ||
523 | /* Add the length modifier and conversion character appropriate for | |
524 | handling the appropriate host floating-point type. */ | |
525 | if (length) | |
526 | host_format += length; | |
527 | host_format += conversion; | |
528 | ||
529 | return host_format; | |
530 | } | |
531 | ||
532 | /* Implementation of target_float_ops using the host floating-point type T | |
533 | as intermediate type. */ | |
534 | ||
535 | template<typename T> class host_float_ops : public target_float_ops | |
536 | { | |
537 | public: | |
538 | std::string to_string (const gdb_byte *addr, const struct type *type, | |
539 | const char *format) const override; | |
540 | bool from_string (gdb_byte *addr, const struct type *type, | |
541 | const std::string &string) const override; | |
542 | ||
543 | LONGEST to_longest (const gdb_byte *addr, | |
544 | const struct type *type) const override; | |
545 | void from_longest (gdb_byte *addr, const struct type *type, | |
546 | LONGEST val) const override; | |
547 | void from_ulongest (gdb_byte *addr, const struct type *type, | |
548 | ULONGEST val) const override; | |
549 | double to_host_double (const gdb_byte *addr, | |
550 | const struct type *type) const override; | |
551 | void from_host_double (gdb_byte *addr, const struct type *type, | |
552 | double val) const override; | |
553 | void convert (const gdb_byte *from, const struct type *from_type, | |
554 | gdb_byte *to, const struct type *to_type) const override; | |
555 | ||
556 | void binop (enum exp_opcode opcode, | |
557 | const gdb_byte *x, const struct type *type_x, | |
558 | const gdb_byte *y, const struct type *type_y, | |
559 | gdb_byte *res, const struct type *type_res) const override; | |
560 | int compare (const gdb_byte *x, const struct type *type_x, | |
561 | const gdb_byte *y, const struct type *type_y) const override; | |
562 | ||
563 | private: | |
564 | void from_target (const struct floatformat *fmt, | |
565 | const gdb_byte *from, T *to) const; | |
566 | void from_target (const struct type *type, | |
567 | const gdb_byte *from, T *to) const; | |
568 | ||
569 | void to_target (const struct type *type, | |
570 | const T *from, gdb_byte *to) const; | |
571 | void to_target (const struct floatformat *fmt, | |
572 | const T *from, gdb_byte *to) const; | |
573 | }; | |
574 | ||
575 | ||
576 | /* Convert TO/FROM target to the host floating-point format T. | |
1cfb73db UW |
577 | |
578 | If the host and target formats agree, we just copy the raw data | |
579 | into the appropriate type of variable and return, letting the host | |
580 | increase precision as necessary. Otherwise, we call the conversion | |
581 | routine and let it do the dirty work. Note that even if the target | |
582 | and host floating-point formats match, the length of the types | |
583 | might still be different, so the conversion routines must make sure | |
584 | to not overrun any buffers. For example, on x86, long double is | |
585 | the 80-bit extended precision type on both 32-bit and 64-bit ABIs, | |
586 | but by default it is stored as 12 bytes on 32-bit, and 16 bytes on | |
587 | 64-bit, for alignment reasons. See comment in store_typed_floating | |
588 | for a discussion about zeroing out remaining bytes in the target | |
589 | buffer. */ | |
590 | ||
591 | static const struct floatformat *host_float_format = GDB_HOST_FLOAT_FORMAT; | |
592 | static const struct floatformat *host_double_format = GDB_HOST_DOUBLE_FORMAT; | |
593 | static const struct floatformat *host_long_double_format | |
594 | = GDB_HOST_LONG_DOUBLE_FORMAT; | |
595 | ||
7a26362d UW |
596 | /* Convert target floating-point value at FROM in format FMT to host |
597 | floating-point format of type T. */ | |
598 | template<typename T> void | |
599 | host_float_ops<T>::from_target (const struct floatformat *fmt, | |
600 | const gdb_byte *from, T *to) const | |
1cfb73db UW |
601 | { |
602 | gdb_assert (fmt != NULL); | |
603 | ||
604 | if (fmt == host_float_format) | |
605 | { | |
606 | float val = 0; | |
607 | ||
608 | memcpy (&val, from, floatformat_totalsize_bytes (fmt)); | |
609 | *to = val; | |
610 | return; | |
611 | } | |
612 | else if (fmt == host_double_format) | |
613 | { | |
614 | double val = 0; | |
615 | ||
616 | memcpy (&val, from, floatformat_totalsize_bytes (fmt)); | |
617 | *to = val; | |
618 | return; | |
619 | } | |
620 | else if (fmt == host_long_double_format) | |
621 | { | |
622 | long double val = 0; | |
623 | ||
624 | memcpy (&val, from, floatformat_totalsize_bytes (fmt)); | |
625 | *to = val; | |
626 | return; | |
627 | } | |
628 | ||
629 | unsigned char *ufrom = (unsigned char *) from; | |
7a26362d | 630 | T dto; |
1cfb73db UW |
631 | long exponent; |
632 | unsigned long mant; | |
633 | unsigned int mant_bits, mant_off; | |
634 | int mant_bits_left; | |
635 | int special_exponent; /* It's a NaN, denorm or zero. */ | |
636 | enum floatformat_byteorders order; | |
637 | unsigned char newfrom[FLOATFORMAT_LARGEST_BYTES]; | |
638 | enum float_kind kind; | |
639 | ||
640 | gdb_assert (fmt->totalsize | |
641 | <= FLOATFORMAT_LARGEST_BYTES * FLOATFORMAT_CHAR_BIT); | |
642 | ||
643 | /* For non-numbers, reuse libiberty's logic to find the correct | |
644 | format. We do not lose any precision in this case by passing | |
645 | through a double. */ | |
646 | kind = floatformat_classify (fmt, (const bfd_byte *) from); | |
647 | if (kind == float_infinite || kind == float_nan) | |
648 | { | |
649 | double dto; | |
650 | ||
651 | floatformat_to_double (fmt->split_half ? fmt->split_half : fmt, | |
652 | from, &dto); | |
7a26362d | 653 | *to = (T) dto; |
1cfb73db UW |
654 | return; |
655 | } | |
656 | ||
657 | order = floatformat_normalize_byteorder (fmt, ufrom, newfrom); | |
658 | ||
659 | if (order != fmt->byteorder) | |
660 | ufrom = newfrom; | |
661 | ||
662 | if (fmt->split_half) | |
663 | { | |
7a26362d | 664 | T dtop, dbot; |
1cfb73db | 665 | |
7a26362d | 666 | from_target (fmt->split_half, ufrom, &dtop); |
1cfb73db UW |
667 | /* Preserve the sign of 0, which is the sign of the top |
668 | half. */ | |
669 | if (dtop == 0.0) | |
670 | { | |
671 | *to = dtop; | |
672 | return; | |
673 | } | |
7a26362d UW |
674 | from_target (fmt->split_half, |
675 | ufrom + fmt->totalsize / FLOATFORMAT_CHAR_BIT / 2, &dbot); | |
1cfb73db UW |
676 | *to = dtop + dbot; |
677 | return; | |
678 | } | |
679 | ||
680 | exponent = get_field (ufrom, order, fmt->totalsize, fmt->exp_start, | |
681 | fmt->exp_len); | |
682 | /* Note that if exponent indicates a NaN, we can't really do anything useful | |
683 | (not knowing if the host has NaN's, or how to build one). So it will | |
684 | end up as an infinity or something close; that is OK. */ | |
685 | ||
686 | mant_bits_left = fmt->man_len; | |
687 | mant_off = fmt->man_start; | |
688 | dto = 0.0; | |
689 | ||
690 | special_exponent = exponent == 0 || exponent == fmt->exp_nan; | |
691 | ||
692 | /* Don't bias NaNs. Use minimum exponent for denorms. For | |
693 | simplicity, we don't check for zero as the exponent doesn't matter. | |
694 | Note the cast to int; exp_bias is unsigned, so it's important to | |
695 | make sure the operation is done in signed arithmetic. */ | |
696 | if (!special_exponent) | |
697 | exponent -= fmt->exp_bias; | |
698 | else if (exponent == 0) | |
699 | exponent = 1 - fmt->exp_bias; | |
700 | ||
701 | /* Build the result algebraically. Might go infinite, underflow, etc; | |
702 | who cares. */ | |
703 | ||
704 | /* If this format uses a hidden bit, explicitly add it in now. Otherwise, | |
705 | increment the exponent by one to account for the integer bit. */ | |
706 | ||
707 | if (!special_exponent) | |
708 | { | |
709 | if (fmt->intbit == floatformat_intbit_no) | |
710 | dto = ldexp (1.0, exponent); | |
711 | else | |
712 | exponent++; | |
713 | } | |
714 | ||
715 | while (mant_bits_left > 0) | |
716 | { | |
717 | mant_bits = std::min (mant_bits_left, 32); | |
718 | ||
719 | mant = get_field (ufrom, order, fmt->totalsize, mant_off, mant_bits); | |
720 | ||
7a26362d | 721 | dto += ldexp ((T) mant, exponent - mant_bits); |
1cfb73db UW |
722 | exponent -= mant_bits; |
723 | mant_off += mant_bits; | |
724 | mant_bits_left -= mant_bits; | |
725 | } | |
726 | ||
727 | /* Negate it if negative. */ | |
728 | if (get_field (ufrom, order, fmt->totalsize, fmt->sign_start, 1)) | |
729 | dto = -dto; | |
730 | *to = dto; | |
731 | } | |
732 | ||
7a26362d UW |
733 | template<typename T> void |
734 | host_float_ops<T>::from_target (const struct type *type, | |
735 | const gdb_byte *from, T *to) const | |
736 | { | |
737 | from_target (floatformat_from_type (type), from, to); | |
738 | } | |
739 | ||
740 | /* Convert host floating-point value of type T to target floating-point | |
741 | value in format FMT and store at TO. */ | |
742 | template<typename T> void | |
743 | host_float_ops<T>::to_target (const struct floatformat *fmt, | |
744 | const T *from, gdb_byte *to) const | |
1cfb73db UW |
745 | { |
746 | gdb_assert (fmt != NULL); | |
747 | ||
748 | if (fmt == host_float_format) | |
749 | { | |
750 | float val = *from; | |
751 | ||
752 | memcpy (to, &val, floatformat_totalsize_bytes (fmt)); | |
753 | return; | |
754 | } | |
755 | else if (fmt == host_double_format) | |
756 | { | |
757 | double val = *from; | |
758 | ||
759 | memcpy (to, &val, floatformat_totalsize_bytes (fmt)); | |
760 | return; | |
761 | } | |
762 | else if (fmt == host_long_double_format) | |
763 | { | |
764 | long double val = *from; | |
765 | ||
766 | memcpy (to, &val, floatformat_totalsize_bytes (fmt)); | |
767 | return; | |
768 | } | |
769 | ||
7a26362d | 770 | T dfrom; |
1cfb73db | 771 | int exponent; |
7a26362d | 772 | T mant; |
1cfb73db UW |
773 | unsigned int mant_bits, mant_off; |
774 | int mant_bits_left; | |
775 | unsigned char *uto = (unsigned char *) to; | |
776 | enum floatformat_byteorders order = fmt->byteorder; | |
777 | unsigned char newto[FLOATFORMAT_LARGEST_BYTES]; | |
778 | ||
779 | if (order != floatformat_little) | |
780 | order = floatformat_big; | |
781 | ||
782 | if (order != fmt->byteorder) | |
783 | uto = newto; | |
784 | ||
785 | memcpy (&dfrom, from, sizeof (dfrom)); | |
786 | memset (uto, 0, floatformat_totalsize_bytes (fmt)); | |
787 | ||
788 | if (fmt->split_half) | |
789 | { | |
790 | /* Use static volatile to ensure that any excess precision is | |
791 | removed via storing in memory, and so the top half really is | |
792 | the result of converting to double. */ | |
793 | static volatile double dtop, dbot; | |
7a26362d | 794 | T dtopnv, dbotnv; |
1cfb73db UW |
795 | |
796 | dtop = (double) dfrom; | |
797 | /* If the rounded top half is Inf, the bottom must be 0 not NaN | |
798 | or Inf. */ | |
799 | if (dtop + dtop == dtop && dtop != 0.0) | |
800 | dbot = 0.0; | |
801 | else | |
7a26362d | 802 | dbot = (double) (dfrom - (T) dtop); |
1cfb73db UW |
803 | dtopnv = dtop; |
804 | dbotnv = dbot; | |
7a26362d UW |
805 | to_target (fmt->split_half, &dtopnv, uto); |
806 | to_target (fmt->split_half, &dbotnv, | |
807 | uto + fmt->totalsize / FLOATFORMAT_CHAR_BIT / 2); | |
1cfb73db UW |
808 | return; |
809 | } | |
810 | ||
811 | if (dfrom == 0) | |
812 | goto finalize_byteorder; /* Result is zero */ | |
813 | if (dfrom != dfrom) /* Result is NaN */ | |
814 | { | |
815 | /* From is NaN */ | |
816 | put_field (uto, order, fmt->totalsize, fmt->exp_start, | |
817 | fmt->exp_len, fmt->exp_nan); | |
818 | /* Be sure it's not infinity, but NaN value is irrel. */ | |
819 | put_field (uto, order, fmt->totalsize, fmt->man_start, | |
820 | fmt->man_len, 1); | |
821 | goto finalize_byteorder; | |
822 | } | |
823 | ||
824 | /* If negative, set the sign bit. */ | |
825 | if (dfrom < 0) | |
826 | { | |
827 | put_field (uto, order, fmt->totalsize, fmt->sign_start, 1, 1); | |
828 | dfrom = -dfrom; | |
829 | } | |
830 | ||
831 | if (dfrom + dfrom == dfrom && dfrom != 0.0) /* Result is Infinity. */ | |
832 | { | |
833 | /* Infinity exponent is same as NaN's. */ | |
834 | put_field (uto, order, fmt->totalsize, fmt->exp_start, | |
835 | fmt->exp_len, fmt->exp_nan); | |
836 | /* Infinity mantissa is all zeroes. */ | |
837 | put_field (uto, order, fmt->totalsize, fmt->man_start, | |
838 | fmt->man_len, 0); | |
839 | goto finalize_byteorder; | |
840 | } | |
841 | ||
1cfb73db | 842 | mant = frexp (dfrom, &exponent); |
1cfb73db UW |
843 | |
844 | if (exponent + fmt->exp_bias <= 0) | |
845 | { | |
846 | /* The value is too small to be expressed in the destination | |
847 | type (not enough bits in the exponent. Treat as 0. */ | |
848 | put_field (uto, order, fmt->totalsize, fmt->exp_start, | |
849 | fmt->exp_len, 0); | |
850 | put_field (uto, order, fmt->totalsize, fmt->man_start, | |
851 | fmt->man_len, 0); | |
852 | goto finalize_byteorder; | |
853 | } | |
854 | ||
855 | if (exponent + fmt->exp_bias >= (1 << fmt->exp_len)) | |
856 | { | |
857 | /* The value is too large to fit into the destination. | |
858 | Treat as infinity. */ | |
859 | put_field (uto, order, fmt->totalsize, fmt->exp_start, | |
860 | fmt->exp_len, fmt->exp_nan); | |
861 | put_field (uto, order, fmt->totalsize, fmt->man_start, | |
862 | fmt->man_len, 0); | |
863 | goto finalize_byteorder; | |
864 | } | |
865 | ||
866 | put_field (uto, order, fmt->totalsize, fmt->exp_start, fmt->exp_len, | |
867 | exponent + fmt->exp_bias - 1); | |
868 | ||
869 | mant_bits_left = fmt->man_len; | |
870 | mant_off = fmt->man_start; | |
871 | while (mant_bits_left > 0) | |
872 | { | |
873 | unsigned long mant_long; | |
874 | ||
875 | mant_bits = mant_bits_left < 32 ? mant_bits_left : 32; | |
876 | ||
877 | mant *= 4294967296.0; | |
878 | mant_long = ((unsigned long) mant) & 0xffffffffL; | |
879 | mant -= mant_long; | |
880 | ||
881 | /* If the integer bit is implicit, then we need to discard it. | |
882 | If we are discarding a zero, we should be (but are not) creating | |
883 | a denormalized number which means adjusting the exponent | |
884 | (I think). */ | |
885 | if (mant_bits_left == fmt->man_len | |
886 | && fmt->intbit == floatformat_intbit_no) | |
887 | { | |
888 | mant_long <<= 1; | |
889 | mant_long &= 0xffffffffL; | |
890 | /* If we are processing the top 32 mantissa bits of a doublest | |
891 | so as to convert to a float value with implied integer bit, | |
892 | we will only be putting 31 of those 32 bits into the | |
893 | final value due to the discarding of the top bit. In the | |
894 | case of a small float value where the number of mantissa | |
895 | bits is less than 32, discarding the top bit does not alter | |
896 | the number of bits we will be adding to the result. */ | |
897 | if (mant_bits == 32) | |
898 | mant_bits -= 1; | |
899 | } | |
900 | ||
901 | if (mant_bits < 32) | |
902 | { | |
903 | /* The bits we want are in the most significant MANT_BITS bits of | |
904 | mant_long. Move them to the least significant. */ | |
905 | mant_long >>= 32 - mant_bits; | |
906 | } | |
907 | ||
908 | put_field (uto, order, fmt->totalsize, | |
909 | mant_off, mant_bits, mant_long); | |
910 | mant_off += mant_bits; | |
911 | mant_bits_left -= mant_bits; | |
912 | } | |
913 | ||
914 | finalize_byteorder: | |
915 | /* Do we need to byte-swap the words in the result? */ | |
916 | if (order != fmt->byteorder) | |
917 | floatformat_normalize_byteorder (fmt, newto, to); | |
918 | } | |
919 | ||
7a26362d UW |
920 | template<typename T> void |
921 | host_float_ops<T>::to_target (const struct type *type, | |
922 | const T *from, gdb_byte *to) const | |
1cfb73db | 923 | { |
7a26362d UW |
924 | /* Ensure possible padding bytes in the target buffer are zeroed out. */ |
925 | memset (to, 0, TYPE_LENGTH (type)); | |
1cfb73db | 926 | |
7a26362d UW |
927 | to_target (floatformat_from_type (type), from, to); |
928 | } | |
1cfb73db | 929 | |
7a26362d UW |
930 | /* Convert the byte-stream ADDR, interpreted as floating-point type TYPE, |
931 | to a string, optionally using the print format FORMAT. */ | |
932 | template<typename T> struct printf_length_modifier | |
933 | { | |
934 | static constexpr char value = 0; | |
935 | }; | |
936 | template<> struct printf_length_modifier<long double> | |
937 | { | |
938 | static constexpr char value = 'L'; | |
939 | }; | |
940 | template<typename T> std::string | |
941 | host_float_ops<T>::to_string (const gdb_byte *addr, const struct type *type, | |
942 | const char *format) const | |
943 | { | |
1cfb73db | 944 | /* Determine the format string to use on the host side. */ |
7a26362d UW |
945 | constexpr char length = printf_length_modifier<T>::value; |
946 | const struct floatformat *fmt = floatformat_from_type (type); | |
947 | std::string host_format = floatformat_printf_format (fmt, format, length); | |
1cfb73db | 948 | |
7a26362d UW |
949 | T host_float; |
950 | from_target (type, addr, &host_float); | |
951 | return string_printf (host_format.c_str (), host_float); | |
1cfb73db UW |
952 | } |
953 | ||
7a26362d | 954 | /* Parse string IN into a target floating-number of type TYPE and |
1cfb73db | 955 | store it as byte-stream ADDR. Return whether parsing succeeded. */ |
7a26362d UW |
956 | template<typename T> struct scanf_length_modifier |
957 | { | |
958 | static constexpr char value = 0; | |
959 | }; | |
960 | template<> struct scanf_length_modifier<double> | |
961 | { | |
962 | static constexpr char value = 'l'; | |
963 | }; | |
964 | template<> struct scanf_length_modifier<long double> | |
965 | { | |
966 | static constexpr char value = 'L'; | |
967 | }; | |
968 | template<typename T> bool | |
969 | host_float_ops<T>::from_string (gdb_byte *addr, const struct type *type, | |
970 | const std::string &in) const | |
1cfb73db | 971 | { |
7a26362d | 972 | T host_float; |
1cfb73db | 973 | int n, num; |
7a26362d UW |
974 | |
975 | std::string scan_format = "%"; | |
976 | if (scanf_length_modifier<T>::value) | |
977 | scan_format += scanf_length_modifier<T>::value; | |
978 | scan_format += "g%n"; | |
979 | ||
980 | num = sscanf (in.c_str (), scan_format.c_str(), &host_float, &n); | |
1cfb73db UW |
981 | |
982 | /* The sscanf man page suggests not making any assumptions on the effect | |
983 | of %n on the result, so we don't. | |
984 | That is why we simply test num == 0. */ | |
985 | if (num == 0) | |
986 | return false; | |
987 | ||
988 | /* We only accept the whole string. */ | |
989 | if (in[n]) | |
990 | return false; | |
991 | ||
7a26362d | 992 | to_target (type, &host_float, addr); |
1cfb73db UW |
993 | return true; |
994 | } | |
995 | ||
7a26362d | 996 | /* Convert the byte-stream ADDR, interpreted as floating-point type TYPE, |
50637b26 | 997 | to an integer value (rounding towards zero). */ |
7a26362d UW |
998 | template<typename T> LONGEST |
999 | host_float_ops<T>::to_longest (const gdb_byte *addr, | |
1000 | const struct type *type) const | |
50637b26 | 1001 | { |
7a26362d UW |
1002 | T host_float; |
1003 | from_target (type, addr, &host_float); | |
1004 | /* Converting an out-of-range value is undefined behavior in C, but we | |
1005 | prefer to return a defined value here. */ | |
1006 | if (host_float > std::numeric_limits<LONGEST>::max()) | |
1007 | return std::numeric_limits<LONGEST>::max(); | |
1008 | if (host_float < std::numeric_limits<LONGEST>::min()) | |
1009 | return std::numeric_limits<LONGEST>::min(); | |
1010 | return (LONGEST) host_float; | |
50637b26 UW |
1011 | } |
1012 | ||
7a26362d | 1013 | /* Convert signed integer VAL to a target floating-number of type TYPE |
50637b26 | 1014 | and store it as byte-stream ADDR. */ |
7a26362d UW |
1015 | template<typename T> void |
1016 | host_float_ops<T>::from_longest (gdb_byte *addr, const struct type *type, | |
1017 | LONGEST val) const | |
50637b26 | 1018 | { |
7a26362d UW |
1019 | T host_float = (T) val; |
1020 | to_target (type, &host_float, addr); | |
50637b26 UW |
1021 | } |
1022 | ||
7a26362d | 1023 | /* Convert unsigned integer VAL to a target floating-number of type TYPE |
50637b26 | 1024 | and store it as byte-stream ADDR. */ |
7a26362d UW |
1025 | template<typename T> void |
1026 | host_float_ops<T>::from_ulongest (gdb_byte *addr, const struct type *type, | |
1027 | ULONGEST val) const | |
50637b26 | 1028 | { |
7a26362d UW |
1029 | T host_float = (T) val; |
1030 | to_target (type, &host_float, addr); | |
50637b26 UW |
1031 | } |
1032 | ||
7a26362d | 1033 | /* Convert the byte-stream ADDR, interpreted as floating-point type TYPE, |
14ad9311 | 1034 | to a floating-point value in the host "double" format. */ |
7a26362d UW |
1035 | template<typename T> double |
1036 | host_float_ops<T>::to_host_double (const gdb_byte *addr, | |
1037 | const struct type *type) const | |
14ad9311 | 1038 | { |
7a26362d UW |
1039 | T host_float; |
1040 | from_target (type, addr, &host_float); | |
1041 | return (double) host_float; | |
14ad9311 UW |
1042 | } |
1043 | ||
1044 | /* Convert floating-point value VAL in the host "double" format to a target | |
7a26362d UW |
1045 | floating-number of type TYPE and store it as byte-stream ADDR. */ |
1046 | template<typename T> void | |
1047 | host_float_ops<T>::from_host_double (gdb_byte *addr, const struct type *type, | |
1048 | double val) const | |
14ad9311 | 1049 | { |
7a26362d UW |
1050 | T host_float = (T) val; |
1051 | to_target (type, &host_float, addr); | |
14ad9311 UW |
1052 | } |
1053 | ||
7a26362d UW |
1054 | /* Convert a floating-point number of type FROM_TYPE from the target |
1055 | byte-stream FROM to a floating-point number of type TO_TYPE, and | |
50637b26 | 1056 | store it to the target byte-stream TO. */ |
7a26362d UW |
1057 | template<typename T> void |
1058 | host_float_ops<T>::convert (const gdb_byte *from, | |
1059 | const struct type *from_type, | |
1060 | gdb_byte *to, | |
1061 | const struct type *to_type) const | |
50637b26 | 1062 | { |
7a26362d UW |
1063 | T host_float; |
1064 | from_target (from_type, from, &host_float); | |
1065 | to_target (to_type, &host_float, to); | |
50637b26 UW |
1066 | } |
1067 | ||
66c02b9e UW |
1068 | /* Perform the binary operation indicated by OPCODE, using as operands the |
1069 | target byte streams X and Y, interpreted as floating-point numbers of | |
7a26362d UW |
1070 | types TYPE_X and TYPE_Y, respectively. Convert the result to format |
1071 | TYPE_RES and store it into the byte-stream RES. */ | |
1072 | template<typename T> void | |
1073 | host_float_ops<T>::binop (enum exp_opcode op, | |
1074 | const gdb_byte *x, const struct type *type_x, | |
1075 | const gdb_byte *y, const struct type *type_y, | |
1076 | gdb_byte *res, const struct type *type_res) const | |
66c02b9e | 1077 | { |
7a26362d | 1078 | T v1, v2, v = 0; |
66c02b9e | 1079 | |
7a26362d UW |
1080 | from_target (type_x, x, &v1); |
1081 | from_target (type_y, y, &v2); | |
66c02b9e UW |
1082 | |
1083 | switch (op) | |
1084 | { | |
1085 | case BINOP_ADD: | |
1086 | v = v1 + v2; | |
1087 | break; | |
1088 | ||
1089 | case BINOP_SUB: | |
1090 | v = v1 - v2; | |
1091 | break; | |
1092 | ||
1093 | case BINOP_MUL: | |
1094 | v = v1 * v2; | |
1095 | break; | |
1096 | ||
1097 | case BINOP_DIV: | |
1098 | v = v1 / v2; | |
1099 | break; | |
1100 | ||
1101 | case BINOP_EXP: | |
1102 | errno = 0; | |
1103 | v = pow (v1, v2); | |
1104 | if (errno) | |
1105 | error (_("Cannot perform exponentiation: %s"), | |
1106 | safe_strerror (errno)); | |
1107 | break; | |
1108 | ||
1109 | case BINOP_MIN: | |
1110 | v = v1 < v2 ? v1 : v2; | |
1111 | break; | |
1112 | ||
1113 | case BINOP_MAX: | |
1114 | v = v1 > v2 ? v1 : v2; | |
1115 | break; | |
1116 | ||
1117 | default: | |
1118 | error (_("Integer-only operation on floating point number.")); | |
1119 | break; | |
1120 | } | |
1121 | ||
7a26362d | 1122 | to_target (type_res, &v, res); |
66c02b9e UW |
1123 | } |
1124 | ||
1125 | /* Compare the two target byte streams X and Y, interpreted as floating-point | |
7a26362d | 1126 | numbers of types TYPE_X and TYPE_Y, respectively. Return zero if X and Y |
66c02b9e | 1127 | are equal, -1 if X is less than Y, and 1 otherwise. */ |
7a26362d UW |
1128 | template<typename T> int |
1129 | host_float_ops<T>::compare (const gdb_byte *x, const struct type *type_x, | |
1130 | const gdb_byte *y, const struct type *type_y) const | |
66c02b9e | 1131 | { |
7a26362d | 1132 | T v1, v2; |
66c02b9e | 1133 | |
7a26362d UW |
1134 | from_target (type_x, x, &v1); |
1135 | from_target (type_y, y, &v2); | |
66c02b9e UW |
1136 | |
1137 | if (v1 == v2) | |
1138 | return 0; | |
1139 | if (v1 < v2) | |
1140 | return -1; | |
1141 | return 1; | |
1142 | } | |
1143 | ||
50637b26 | 1144 | |
2400729e UW |
1145 | /* Implementation of target_float_ops using the MPFR library |
1146 | mpfr_t as intermediate type. */ | |
1147 | ||
1148 | #ifdef HAVE_LIBMPFR | |
1149 | ||
1150 | #include <mpfr.h> | |
1151 | ||
1152 | class mpfr_float_ops : public target_float_ops | |
1153 | { | |
1154 | public: | |
1155 | std::string to_string (const gdb_byte *addr, const struct type *type, | |
1156 | const char *format) const override; | |
1157 | bool from_string (gdb_byte *addr, const struct type *type, | |
1158 | const std::string &string) const override; | |
1159 | ||
1160 | LONGEST to_longest (const gdb_byte *addr, | |
1161 | const struct type *type) const override; | |
1162 | void from_longest (gdb_byte *addr, const struct type *type, | |
1163 | LONGEST val) const override; | |
1164 | void from_ulongest (gdb_byte *addr, const struct type *type, | |
1165 | ULONGEST val) const override; | |
1166 | double to_host_double (const gdb_byte *addr, | |
1167 | const struct type *type) const override; | |
1168 | void from_host_double (gdb_byte *addr, const struct type *type, | |
1169 | double val) const override; | |
1170 | void convert (const gdb_byte *from, const struct type *from_type, | |
1171 | gdb_byte *to, const struct type *to_type) const override; | |
1172 | ||
1173 | void binop (enum exp_opcode opcode, | |
1174 | const gdb_byte *x, const struct type *type_x, | |
1175 | const gdb_byte *y, const struct type *type_y, | |
1176 | gdb_byte *res, const struct type *type_res) const override; | |
1177 | int compare (const gdb_byte *x, const struct type *type_x, | |
1178 | const gdb_byte *y, const struct type *type_y) const override; | |
1179 | ||
1180 | private: | |
1181 | /* Local wrapper class to handle mpfr_t initalization and cleanup. */ | |
1182 | class gdb_mpfr | |
1183 | { | |
1184 | public: | |
1185 | mpfr_t val; | |
1186 | ||
1187 | gdb_mpfr (const struct type *type) | |
1188 | { | |
1189 | const struct floatformat *fmt = floatformat_from_type (type); | |
1190 | mpfr_init2 (val, floatformat_precision (fmt)); | |
1191 | } | |
1192 | ||
1193 | gdb_mpfr (const gdb_mpfr &source) | |
1194 | { | |
1195 | mpfr_init2 (val, mpfr_get_prec (source.val)); | |
1196 | } | |
1197 | ||
1198 | ~gdb_mpfr () | |
1199 | { | |
1200 | mpfr_clear (val); | |
1201 | } | |
1202 | }; | |
1203 | ||
1204 | void from_target (const struct floatformat *fmt, | |
1205 | const gdb_byte *from, gdb_mpfr &to) const; | |
1206 | void from_target (const struct type *type, | |
1207 | const gdb_byte *from, gdb_mpfr &to) const; | |
1208 | ||
1209 | void to_target (const struct type *type, | |
1210 | const gdb_mpfr &from, gdb_byte *to) const; | |
1211 | void to_target (const struct floatformat *fmt, | |
1212 | const gdb_mpfr &from, gdb_byte *to) const; | |
1213 | }; | |
1214 | ||
1215 | ||
1216 | /* Convert TO/FROM target floating-point format to mpfr_t. */ | |
1217 | ||
1218 | void | |
1219 | mpfr_float_ops::from_target (const struct floatformat *fmt, | |
1220 | const gdb_byte *orig_from, gdb_mpfr &to) const | |
1221 | { | |
1222 | const gdb_byte *from = orig_from; | |
1223 | mpfr_exp_t exponent; | |
1224 | unsigned long mant; | |
1225 | unsigned int mant_bits, mant_off; | |
1226 | int mant_bits_left; | |
1227 | int special_exponent; /* It's a NaN, denorm or zero. */ | |
1228 | enum floatformat_byteorders order; | |
1229 | unsigned char newfrom[FLOATFORMAT_LARGEST_BYTES]; | |
1230 | enum float_kind kind; | |
1231 | ||
1232 | gdb_assert (fmt->totalsize | |
1233 | <= FLOATFORMAT_LARGEST_BYTES * FLOATFORMAT_CHAR_BIT); | |
1234 | ||
1235 | /* Handle non-numbers. */ | |
1236 | kind = floatformat_classify (fmt, from); | |
1237 | if (kind == float_infinite) | |
1238 | { | |
1239 | mpfr_set_inf (to.val, floatformat_is_negative (fmt, from) ? -1 : 1); | |
1240 | return; | |
1241 | } | |
1242 | if (kind == float_nan) | |
1243 | { | |
1244 | mpfr_set_nan (to.val); | |
1245 | return; | |
1246 | } | |
1247 | ||
1248 | order = floatformat_normalize_byteorder (fmt, from, newfrom); | |
1249 | ||
1250 | if (order != fmt->byteorder) | |
1251 | from = newfrom; | |
1252 | ||
1253 | if (fmt->split_half) | |
1254 | { | |
1255 | gdb_mpfr top (to), bot (to); | |
1256 | ||
1257 | from_target (fmt->split_half, from, top); | |
1258 | /* Preserve the sign of 0, which is the sign of the top half. */ | |
1259 | if (mpfr_zero_p (top.val)) | |
1260 | { | |
1261 | mpfr_set (to.val, top.val, MPFR_RNDN); | |
1262 | return; | |
1263 | } | |
1264 | from_target (fmt->split_half, | |
1265 | from + fmt->totalsize / FLOATFORMAT_CHAR_BIT / 2, bot); | |
1266 | mpfr_add (to.val, top.val, bot.val, MPFR_RNDN); | |
1267 | return; | |
1268 | } | |
1269 | ||
1270 | exponent = get_field (from, order, fmt->totalsize, fmt->exp_start, | |
1271 | fmt->exp_len); | |
1272 | /* Note that if exponent indicates a NaN, we can't really do anything useful | |
1273 | (not knowing if the host has NaN's, or how to build one). So it will | |
1274 | end up as an infinity or something close; that is OK. */ | |
1275 | ||
1276 | mant_bits_left = fmt->man_len; | |
1277 | mant_off = fmt->man_start; | |
1278 | mpfr_set_zero (to.val, 0); | |
1279 | ||
1280 | special_exponent = exponent == 0 || exponent == fmt->exp_nan; | |
1281 | ||
1282 | /* Don't bias NaNs. Use minimum exponent for denorms. For | |
1283 | simplicity, we don't check for zero as the exponent doesn't matter. | |
1284 | Note the cast to int; exp_bias is unsigned, so it's important to | |
1285 | make sure the operation is done in signed arithmetic. */ | |
1286 | if (!special_exponent) | |
1287 | exponent -= fmt->exp_bias; | |
1288 | else if (exponent == 0) | |
1289 | exponent = 1 - fmt->exp_bias; | |
1290 | ||
1291 | /* Build the result algebraically. Might go infinite, underflow, etc; | |
1292 | who cares. */ | |
1293 | ||
1294 | /* If this format uses a hidden bit, explicitly add it in now. Otherwise, | |
1295 | increment the exponent by one to account for the integer bit. */ | |
1296 | ||
1297 | if (!special_exponent) | |
1298 | { | |
1299 | if (fmt->intbit == floatformat_intbit_no) | |
1300 | mpfr_set_ui_2exp (to.val, 1, exponent, MPFR_RNDN); | |
1301 | else | |
1302 | exponent++; | |
1303 | } | |
1304 | ||
1305 | gdb_mpfr tmp (to); | |
1306 | ||
1307 | while (mant_bits_left > 0) | |
1308 | { | |
1309 | mant_bits = std::min (mant_bits_left, 32); | |
1310 | ||
1311 | mant = get_field (from, order, fmt->totalsize, mant_off, mant_bits); | |
1312 | ||
1313 | mpfr_set_si (tmp.val, mant, MPFR_RNDN); | |
1314 | mpfr_mul_2si (tmp.val, tmp.val, exponent - mant_bits, MPFR_RNDN); | |
1315 | mpfr_add (to.val, to.val, tmp.val, MPFR_RNDN); | |
1316 | exponent -= mant_bits; | |
1317 | mant_off += mant_bits; | |
1318 | mant_bits_left -= mant_bits; | |
1319 | } | |
1320 | ||
1321 | /* Negate it if negative. */ | |
1322 | if (get_field (from, order, fmt->totalsize, fmt->sign_start, 1)) | |
1323 | mpfr_neg (to.val, to.val, MPFR_RNDN); | |
1324 | } | |
1325 | ||
1326 | void | |
1327 | mpfr_float_ops::from_target (const struct type *type, | |
1328 | const gdb_byte *from, gdb_mpfr &to) const | |
1329 | { | |
1330 | from_target (floatformat_from_type (type), from, to); | |
1331 | } | |
1332 | ||
1333 | void | |
1334 | mpfr_float_ops::to_target (const struct floatformat *fmt, | |
1335 | const gdb_mpfr &from, gdb_byte *orig_to) const | |
1336 | { | |
1337 | unsigned char *to = orig_to; | |
1338 | mpfr_exp_t exponent; | |
1339 | unsigned int mant_bits, mant_off; | |
1340 | int mant_bits_left; | |
1341 | enum floatformat_byteorders order = fmt->byteorder; | |
1342 | unsigned char newto[FLOATFORMAT_LARGEST_BYTES]; | |
1343 | ||
1344 | if (order != floatformat_little) | |
1345 | order = floatformat_big; | |
1346 | ||
1347 | if (order != fmt->byteorder) | |
1348 | to = newto; | |
1349 | ||
1350 | memset (to, 0, floatformat_totalsize_bytes (fmt)); | |
1351 | ||
1352 | if (fmt->split_half) | |
1353 | { | |
1354 | gdb_mpfr top (from), bot (from); | |
1355 | ||
1356 | mpfr_set (top.val, from.val, MPFR_RNDN); | |
1357 | /* If the rounded top half is Inf, the bottom must be 0 not NaN | |
1358 | or Inf. */ | |
1359 | if (mpfr_inf_p (top.val)) | |
1360 | mpfr_set_zero (bot.val, 0); | |
1361 | else | |
1362 | mpfr_sub (bot.val, from.val, top.val, MPFR_RNDN); | |
1363 | ||
1364 | to_target (fmt->split_half, top, to); | |
1365 | to_target (fmt->split_half, bot, | |
1366 | to + fmt->totalsize / FLOATFORMAT_CHAR_BIT / 2); | |
1367 | return; | |
1368 | } | |
1369 | ||
1370 | gdb_mpfr tmp (from); | |
1371 | ||
1372 | if (mpfr_zero_p (from.val)) | |
1373 | goto finalize_byteorder; /* Result is zero */ | |
1374 | ||
1375 | mpfr_set (tmp.val, from.val, MPFR_RNDN); | |
1376 | ||
1377 | if (mpfr_nan_p (tmp.val)) /* Result is NaN */ | |
1378 | { | |
1379 | /* From is NaN */ | |
1380 | put_field (to, order, fmt->totalsize, fmt->exp_start, | |
1381 | fmt->exp_len, fmt->exp_nan); | |
1382 | /* Be sure it's not infinity, but NaN value is irrel. */ | |
1383 | put_field (to, order, fmt->totalsize, fmt->man_start, | |
1384 | fmt->man_len, 1); | |
1385 | goto finalize_byteorder; | |
1386 | } | |
1387 | ||
1388 | /* If negative, set the sign bit. */ | |
1389 | if (mpfr_sgn (tmp.val) < 0) | |
1390 | { | |
1391 | put_field (to, order, fmt->totalsize, fmt->sign_start, 1, 1); | |
1392 | mpfr_neg (tmp.val, tmp.val, MPFR_RNDN); | |
1393 | } | |
1394 | ||
1395 | if (mpfr_inf_p (tmp.val)) /* Result is Infinity. */ | |
1396 | { | |
1397 | /* Infinity exponent is same as NaN's. */ | |
1398 | put_field (to, order, fmt->totalsize, fmt->exp_start, | |
1399 | fmt->exp_len, fmt->exp_nan); | |
1400 | /* Infinity mantissa is all zeroes. */ | |
1401 | put_field (to, order, fmt->totalsize, fmt->man_start, | |
1402 | fmt->man_len, 0); | |
1403 | goto finalize_byteorder; | |
1404 | } | |
1405 | ||
1406 | mpfr_frexp (&exponent, tmp.val, tmp.val, MPFR_RNDN); | |
1407 | ||
1408 | if (exponent + fmt->exp_bias <= 0) | |
1409 | { | |
1410 | /* The value is too small to be expressed in the destination | |
1411 | type (not enough bits in the exponent. Treat as 0. */ | |
1412 | put_field (to, order, fmt->totalsize, fmt->exp_start, | |
1413 | fmt->exp_len, 0); | |
1414 | put_field (to, order, fmt->totalsize, fmt->man_start, | |
1415 | fmt->man_len, 0); | |
1416 | goto finalize_byteorder; | |
1417 | } | |
1418 | ||
1419 | if (exponent + fmt->exp_bias >= (1 << fmt->exp_len)) | |
1420 | { | |
1421 | /* The value is too large to fit into the destination. | |
1422 | Treat as infinity. */ | |
1423 | put_field (to, order, fmt->totalsize, fmt->exp_start, | |
1424 | fmt->exp_len, fmt->exp_nan); | |
1425 | put_field (to, order, fmt->totalsize, fmt->man_start, | |
1426 | fmt->man_len, 0); | |
1427 | goto finalize_byteorder; | |
1428 | } | |
1429 | ||
1430 | put_field (to, order, fmt->totalsize, fmt->exp_start, fmt->exp_len, | |
1431 | exponent + fmt->exp_bias - 1); | |
1432 | ||
1433 | mant_bits_left = fmt->man_len; | |
1434 | mant_off = fmt->man_start; | |
1435 | while (mant_bits_left > 0) | |
1436 | { | |
1437 | unsigned long mant_long; | |
1438 | ||
1439 | mant_bits = mant_bits_left < 32 ? mant_bits_left : 32; | |
1440 | ||
1441 | mpfr_mul_2ui (tmp.val, tmp.val, 32, MPFR_RNDN); | |
1442 | mant_long = mpfr_get_ui (tmp.val, MPFR_RNDZ) & 0xffffffffL; | |
1443 | mpfr_sub_ui (tmp.val, tmp.val, mant_long, MPFR_RNDZ); | |
1444 | ||
1445 | /* If the integer bit is implicit, then we need to discard it. | |
1446 | If we are discarding a zero, we should be (but are not) creating | |
1447 | a denormalized number which means adjusting the exponent | |
1448 | (I think). */ | |
1449 | if (mant_bits_left == fmt->man_len | |
1450 | && fmt->intbit == floatformat_intbit_no) | |
1451 | { | |
1452 | mant_long <<= 1; | |
1453 | mant_long &= 0xffffffffL; | |
1454 | /* If we are processing the top 32 mantissa bits of a doublest | |
1455 | so as to convert to a float value with implied integer bit, | |
1456 | we will only be putting 31 of those 32 bits into the | |
1457 | final value due to the discarding of the top bit. In the | |
1458 | case of a small float value where the number of mantissa | |
1459 | bits is less than 32, discarding the top bit does not alter | |
1460 | the number of bits we will be adding to the result. */ | |
1461 | if (mant_bits == 32) | |
1462 | mant_bits -= 1; | |
1463 | } | |
1464 | ||
1465 | if (mant_bits < 32) | |
1466 | { | |
1467 | /* The bits we want are in the most significant MANT_BITS bits of | |
1468 | mant_long. Move them to the least significant. */ | |
1469 | mant_long >>= 32 - mant_bits; | |
1470 | } | |
1471 | ||
1472 | put_field (to, order, fmt->totalsize, | |
1473 | mant_off, mant_bits, mant_long); | |
1474 | mant_off += mant_bits; | |
1475 | mant_bits_left -= mant_bits; | |
1476 | } | |
1477 | ||
1478 | finalize_byteorder: | |
1479 | /* Do we need to byte-swap the words in the result? */ | |
1480 | if (order != fmt->byteorder) | |
1481 | floatformat_normalize_byteorder (fmt, newto, orig_to); | |
1482 | } | |
1483 | ||
1484 | void | |
1485 | mpfr_float_ops::to_target (const struct type *type, | |
1486 | const gdb_mpfr &from, gdb_byte *to) const | |
1487 | { | |
1488 | /* Ensure possible padding bytes in the target buffer are zeroed out. */ | |
1489 | memset (to, 0, TYPE_LENGTH (type)); | |
1490 | ||
1491 | to_target (floatformat_from_type (type), from, to); | |
1492 | } | |
1493 | ||
1494 | /* Convert the byte-stream ADDR, interpreted as floating-point type TYPE, | |
1495 | to a string, optionally using the print format FORMAT. */ | |
1496 | std::string | |
1497 | mpfr_float_ops::to_string (const gdb_byte *addr, | |
1498 | const struct type *type, | |
1499 | const char *format) const | |
1500 | { | |
1501 | const struct floatformat *fmt = floatformat_from_type (type); | |
1502 | ||
1503 | /* Unless we need to adhere to a specific format, provide special | |
1504 | output for certain cases. */ | |
1505 | if (format == nullptr) | |
1506 | { | |
1507 | /* Detect invalid representations. */ | |
1508 | if (!floatformat_is_valid (fmt, addr)) | |
1509 | return "<invalid float value>"; | |
1510 | ||
1511 | /* Handle NaN and Inf. */ | |
1512 | enum float_kind kind = floatformat_classify (fmt, addr); | |
1513 | if (kind == float_nan) | |
1514 | { | |
1515 | const char *sign = floatformat_is_negative (fmt, addr)? "-" : ""; | |
1516 | const char *mantissa = floatformat_mantissa (fmt, addr); | |
1517 | return string_printf ("%snan(0x%s)", sign, mantissa); | |
1518 | } | |
1519 | else if (kind == float_infinite) | |
1520 | { | |
1521 | const char *sign = floatformat_is_negative (fmt, addr)? "-" : ""; | |
1522 | return string_printf ("%sinf", sign); | |
1523 | } | |
1524 | } | |
1525 | ||
1526 | /* Determine the format string to use on the host side. */ | |
1527 | std::string host_format = floatformat_printf_format (fmt, format, 'R'); | |
1528 | ||
1529 | gdb_mpfr tmp (type); | |
1530 | from_target (type, addr, tmp); | |
1531 | ||
1532 | int size = mpfr_snprintf (NULL, 0, host_format.c_str (), tmp.val); | |
1533 | std::string str (size, '\0'); | |
1534 | mpfr_sprintf (&str[0], host_format.c_str (), tmp.val); | |
1535 | ||
1536 | return str; | |
1537 | } | |
1538 | ||
1539 | /* Parse string STRING into a target floating-number of type TYPE and | |
1540 | store it as byte-stream ADDR. Return whether parsing succeeded. */ | |
1541 | bool | |
1542 | mpfr_float_ops::from_string (gdb_byte *addr, | |
1543 | const struct type *type, | |
1544 | const std::string &in) const | |
1545 | { | |
1546 | gdb_mpfr tmp (type); | |
1547 | ||
1548 | char *endptr; | |
1549 | mpfr_strtofr (tmp.val, in.c_str (), &endptr, 0, MPFR_RNDN); | |
1550 | ||
1551 | /* We only accept the whole string. */ | |
1552 | if (*endptr) | |
1553 | return false; | |
1554 | ||
1555 | to_target (type, tmp, addr); | |
1556 | return true; | |
1557 | } | |
1558 | ||
1559 | /* Convert the byte-stream ADDR, interpreted as floating-point type TYPE, | |
1560 | to an integer value (rounding towards zero). */ | |
1561 | LONGEST | |
1562 | mpfr_float_ops::to_longest (const gdb_byte *addr, | |
1563 | const struct type *type) const | |
1564 | { | |
1565 | gdb_mpfr tmp (type); | |
1566 | from_target (type, addr, tmp); | |
1567 | return mpfr_get_sj (tmp.val, MPFR_RNDZ); | |
1568 | } | |
1569 | ||
1570 | /* Convert signed integer VAL to a target floating-number of type TYPE | |
1571 | and store it as byte-stream ADDR. */ | |
1572 | void | |
1573 | mpfr_float_ops::from_longest (gdb_byte *addr, | |
1574 | const struct type *type, | |
1575 | LONGEST val) const | |
1576 | { | |
1577 | gdb_mpfr tmp (type); | |
1578 | mpfr_set_sj (tmp.val, val, MPFR_RNDN); | |
1579 | to_target (type, tmp, addr); | |
1580 | } | |
1581 | ||
1582 | /* Convert unsigned integer VAL to a target floating-number of type TYPE | |
1583 | and store it as byte-stream ADDR. */ | |
1584 | void | |
1585 | mpfr_float_ops::from_ulongest (gdb_byte *addr, | |
1586 | const struct type *type, | |
1587 | ULONGEST val) const | |
1588 | { | |
1589 | gdb_mpfr tmp (type); | |
1590 | mpfr_set_uj (tmp.val, val, MPFR_RNDN); | |
1591 | to_target (type, tmp, addr); | |
1592 | } | |
1593 | ||
1594 | /* Convert the byte-stream ADDR, interpreted as floating-point type TYPE, | |
1595 | to a floating-point value in the host "double" format. */ | |
1596 | double | |
1597 | mpfr_float_ops::to_host_double (const gdb_byte *addr, | |
1598 | const struct type *type) const | |
1599 | { | |
1600 | gdb_mpfr tmp (type); | |
1601 | from_target (type, addr, tmp); | |
1602 | return mpfr_get_d (tmp.val, MPFR_RNDN); | |
1603 | } | |
1604 | ||
1605 | /* Convert floating-point value VAL in the host "double" format to a target | |
1606 | floating-number of type TYPE and store it as byte-stream ADDR. */ | |
1607 | void | |
1608 | mpfr_float_ops::from_host_double (gdb_byte *addr, | |
1609 | const struct type *type, | |
1610 | double val) const | |
1611 | { | |
1612 | gdb_mpfr tmp (type); | |
1613 | mpfr_set_d (tmp.val, val, MPFR_RNDN); | |
1614 | to_target (type, tmp, addr); | |
1615 | } | |
1616 | ||
1617 | /* Convert a floating-point number of type FROM_TYPE from the target | |
1618 | byte-stream FROM to a floating-point number of type TO_TYPE, and | |
1619 | store it to the target byte-stream TO. */ | |
1620 | void | |
1621 | mpfr_float_ops::convert (const gdb_byte *from, | |
1622 | const struct type *from_type, | |
1623 | gdb_byte *to, | |
1624 | const struct type *to_type) const | |
1625 | { | |
1626 | gdb_mpfr from_tmp (from_type), to_tmp (to_type); | |
1627 | from_target (from_type, from, from_tmp); | |
1628 | mpfr_set (to_tmp.val, from_tmp.val, MPFR_RNDN); | |
1629 | to_target (to_type, to_tmp, to); | |
1630 | } | |
1631 | ||
1632 | /* Perform the binary operation indicated by OPCODE, using as operands the | |
1633 | target byte streams X and Y, interpreted as floating-point numbers of | |
1634 | types TYPE_X and TYPE_Y, respectively. Convert the result to type | |
1635 | TYPE_RES and store it into the byte-stream RES. */ | |
1636 | void | |
1637 | mpfr_float_ops::binop (enum exp_opcode op, | |
1638 | const gdb_byte *x, const struct type *type_x, | |
1639 | const gdb_byte *y, const struct type *type_y, | |
1640 | gdb_byte *res, const struct type *type_res) const | |
1641 | { | |
1642 | gdb_mpfr x_tmp (type_x), y_tmp (type_y), tmp (type_res); | |
1643 | ||
1644 | from_target (type_x, x, x_tmp); | |
1645 | from_target (type_y, y, y_tmp); | |
1646 | ||
1647 | switch (op) | |
1648 | { | |
1649 | case BINOP_ADD: | |
1650 | mpfr_add (tmp.val, x_tmp.val, y_tmp.val, MPFR_RNDN); | |
1651 | break; | |
1652 | ||
1653 | case BINOP_SUB: | |
1654 | mpfr_sub (tmp.val, x_tmp.val, y_tmp.val, MPFR_RNDN); | |
1655 | break; | |
1656 | ||
1657 | case BINOP_MUL: | |
1658 | mpfr_mul (tmp.val, x_tmp.val, y_tmp.val, MPFR_RNDN); | |
1659 | break; | |
1660 | ||
1661 | case BINOP_DIV: | |
1662 | mpfr_div (tmp.val, x_tmp.val, y_tmp.val, MPFR_RNDN); | |
1663 | break; | |
1664 | ||
1665 | case BINOP_EXP: | |
1666 | mpfr_pow (tmp.val, x_tmp.val, y_tmp.val, MPFR_RNDN); | |
1667 | break; | |
1668 | ||
1669 | case BINOP_MIN: | |
1670 | mpfr_min (tmp.val, x_tmp.val, y_tmp.val, MPFR_RNDN); | |
1671 | break; | |
1672 | ||
1673 | case BINOP_MAX: | |
1674 | mpfr_max (tmp.val, x_tmp.val, y_tmp.val, MPFR_RNDN); | |
1675 | break; | |
1676 | ||
1677 | default: | |
1678 | error (_("Integer-only operation on floating point number.")); | |
1679 | break; | |
1680 | } | |
1681 | ||
1682 | to_target (type_res, tmp, res); | |
1683 | } | |
1684 | ||
1685 | /* Compare the two target byte streams X and Y, interpreted as floating-point | |
1686 | numbers of types TYPE_X and TYPE_Y, respectively. Return zero if X and Y | |
1687 | are equal, -1 if X is less than Y, and 1 otherwise. */ | |
1688 | int | |
1689 | mpfr_float_ops::compare (const gdb_byte *x, const struct type *type_x, | |
1690 | const gdb_byte *y, const struct type *type_y) const | |
1691 | { | |
1692 | gdb_mpfr x_tmp (type_x), y_tmp (type_y); | |
1693 | ||
1694 | from_target (type_x, x, x_tmp); | |
1695 | from_target (type_y, y, y_tmp); | |
1696 | ||
1697 | if (mpfr_equal_p (x_tmp.val, y_tmp.val)) | |
1698 | return 0; | |
1699 | else if (mpfr_less_p (x_tmp.val, y_tmp.val)) | |
1700 | return -1; | |
1701 | else | |
1702 | return 1; | |
1703 | } | |
1704 | ||
1705 | #endif | |
1706 | ||
1707 | ||
1cfb73db UW |
1708 | /* Helper routines operating on decimal floating-point data. */ |
1709 | ||
1710 | /* Decimal floating point is one of the extension to IEEE 754, which is | |
1711 | described in http://grouper.ieee.org/groups/754/revision.html and | |
1712 | http://www2.hursley.ibm.com/decimal/. It completes binary floating | |
1713 | point by representing floating point more exactly. */ | |
1714 | ||
1715 | /* The order of the following headers is important for making sure | |
1716 | decNumber structure is large enough to hold decimal128 digits. */ | |
1717 | ||
1718 | #include "dpd/decimal128.h" | |
1719 | #include "dpd/decimal64.h" | |
1720 | #include "dpd/decimal32.h" | |
1721 | ||
1722 | /* When using decimal128, this is the maximum string length + 1 | |
1723 | (value comes from libdecnumber's DECIMAL128_String constant). */ | |
1724 | #define MAX_DECIMAL_STRING 43 | |
1725 | ||
1726 | /* In GDB, we are using an array of gdb_byte to represent decimal values. | |
1727 | They are stored in host byte order. This routine does the conversion if | |
1728 | the target byte order is different. */ | |
1729 | static void | |
7a26362d | 1730 | match_endianness (const gdb_byte *from, const struct type *type, gdb_byte *to) |
1cfb73db | 1731 | { |
7a26362d UW |
1732 | gdb_assert (TYPE_CODE (type) == TYPE_CODE_DECFLOAT); |
1733 | ||
1734 | int len = TYPE_LENGTH (type); | |
1cfb73db UW |
1735 | int i; |
1736 | ||
1737 | #if WORDS_BIGENDIAN | |
1738 | #define OPPOSITE_BYTE_ORDER BFD_ENDIAN_LITTLE | |
1739 | #else | |
1740 | #define OPPOSITE_BYTE_ORDER BFD_ENDIAN_BIG | |
1741 | #endif | |
1742 | ||
7a26362d | 1743 | if (gdbarch_byte_order (get_type_arch (type)) == OPPOSITE_BYTE_ORDER) |
1cfb73db UW |
1744 | for (i = 0; i < len; i++) |
1745 | to[i] = from[len - i - 1]; | |
1746 | else | |
1747 | for (i = 0; i < len; i++) | |
1748 | to[i] = from[i]; | |
1749 | ||
1750 | return; | |
1751 | } | |
1752 | ||
1753 | /* Helper function to get the appropriate libdecnumber context for each size | |
1754 | of decimal float. */ | |
1755 | static void | |
7a26362d | 1756 | set_decnumber_context (decContext *ctx, const struct type *type) |
1cfb73db | 1757 | { |
7a26362d UW |
1758 | gdb_assert (TYPE_CODE (type) == TYPE_CODE_DECFLOAT); |
1759 | ||
1760 | switch (TYPE_LENGTH (type)) | |
1cfb73db UW |
1761 | { |
1762 | case 4: | |
1763 | decContextDefault (ctx, DEC_INIT_DECIMAL32); | |
1764 | break; | |
1765 | case 8: | |
1766 | decContextDefault (ctx, DEC_INIT_DECIMAL64); | |
1767 | break; | |
1768 | case 16: | |
1769 | decContextDefault (ctx, DEC_INIT_DECIMAL128); | |
1770 | break; | |
1771 | } | |
1772 | ||
1773 | ctx->traps = 0; | |
1774 | } | |
1775 | ||
1776 | /* Check for errors signaled in the decimal context structure. */ | |
1777 | static void | |
1778 | decimal_check_errors (decContext *ctx) | |
1779 | { | |
1780 | /* An error here could be a division by zero, an overflow, an underflow or | |
1781 | an invalid operation (from the DEC_Errors constant in decContext.h). | |
1782 | Since GDB doesn't complain about division by zero, overflow or underflow | |
1783 | errors for binary floating, we won't complain about them for decimal | |
1784 | floating either. */ | |
1785 | if (ctx->status & DEC_IEEE_854_Invalid_operation) | |
1786 | { | |
1787 | /* Leave only the error bits in the status flags. */ | |
1788 | ctx->status &= DEC_IEEE_854_Invalid_operation; | |
1789 | error (_("Cannot perform operation: %s"), | |
1790 | decContextStatusToString (ctx)); | |
1791 | } | |
1792 | } | |
1793 | ||
1794 | /* Helper function to convert from libdecnumber's appropriate representation | |
1795 | for computation to each size of decimal float. */ | |
1796 | static void | |
d7236961 | 1797 | decimal_from_number (const decNumber *from, |
7a26362d | 1798 | gdb_byte *to, const struct type *type) |
1cfb73db | 1799 | { |
d7236961 UW |
1800 | gdb_byte dec[16]; |
1801 | ||
1cfb73db UW |
1802 | decContext set; |
1803 | ||
7a26362d | 1804 | set_decnumber_context (&set, type); |
1cfb73db | 1805 | |
7a26362d | 1806 | switch (TYPE_LENGTH (type)) |
1cfb73db UW |
1807 | { |
1808 | case 4: | |
d7236961 | 1809 | decimal32FromNumber ((decimal32 *) dec, from, &set); |
1cfb73db UW |
1810 | break; |
1811 | case 8: | |
d7236961 | 1812 | decimal64FromNumber ((decimal64 *) dec, from, &set); |
1cfb73db UW |
1813 | break; |
1814 | case 16: | |
d7236961 UW |
1815 | decimal128FromNumber ((decimal128 *) dec, from, &set); |
1816 | break; | |
1817 | default: | |
1818 | error (_("Unknown decimal floating point type.")); | |
1cfb73db UW |
1819 | break; |
1820 | } | |
d7236961 | 1821 | |
7a26362d | 1822 | match_endianness (dec, type, to); |
1cfb73db UW |
1823 | } |
1824 | ||
1825 | /* Helper function to convert each size of decimal float to libdecnumber's | |
1826 | appropriate representation for computation. */ | |
1827 | static void | |
7a26362d | 1828 | decimal_to_number (const gdb_byte *addr, const struct type *type, |
d7236961 | 1829 | decNumber *to) |
1cfb73db | 1830 | { |
d7236961 | 1831 | gdb_byte dec[16]; |
7a26362d | 1832 | match_endianness (addr, type, dec); |
d7236961 | 1833 | |
7a26362d | 1834 | switch (TYPE_LENGTH (type)) |
1cfb73db UW |
1835 | { |
1836 | case 4: | |
d7236961 | 1837 | decimal32ToNumber ((decimal32 *) dec, to); |
1cfb73db UW |
1838 | break; |
1839 | case 8: | |
d7236961 | 1840 | decimal64ToNumber ((decimal64 *) dec, to); |
1cfb73db UW |
1841 | break; |
1842 | case 16: | |
d7236961 | 1843 | decimal128ToNumber ((decimal128 *) dec, to); |
1cfb73db UW |
1844 | break; |
1845 | default: | |
1846 | error (_("Unknown decimal floating point type.")); | |
1847 | break; | |
1848 | } | |
1849 | } | |
1850 | ||
7a26362d UW |
1851 | /* Returns true if ADDR (which is of type TYPE) is the number zero. */ |
1852 | static bool | |
1853 | decimal_is_zero (const gdb_byte *addr, const struct type *type) | |
1854 | { | |
1855 | decNumber number; | |
1856 | ||
1857 | decimal_to_number (addr, type, &number); | |
1858 | ||
1859 | return decNumberIsZero (&number); | |
1860 | } | |
1861 | ||
1862 | ||
1863 | /* Implementation of target_float_ops using the libdecnumber decNumber type | |
1864 | as intermediate format. */ | |
1865 | ||
1866 | class decimal_float_ops : public target_float_ops | |
1867 | { | |
1868 | public: | |
1869 | std::string to_string (const gdb_byte *addr, const struct type *type, | |
1870 | const char *format) const override; | |
1871 | bool from_string (gdb_byte *addr, const struct type *type, | |
1872 | const std::string &string) const override; | |
1873 | ||
1874 | LONGEST to_longest (const gdb_byte *addr, | |
1875 | const struct type *type) const override; | |
1876 | void from_longest (gdb_byte *addr, const struct type *type, | |
1877 | LONGEST val) const override; | |
1878 | void from_ulongest (gdb_byte *addr, const struct type *type, | |
1879 | ULONGEST val) const override; | |
1880 | double to_host_double (const gdb_byte *addr, | |
1881 | const struct type *type) const override | |
1882 | { | |
1883 | /* We don't support conversions between target decimal floating-point | |
1884 | types and the host double type. */ | |
1885 | gdb_assert_not_reached ("invalid operation on decimal float"); | |
1886 | } | |
1887 | void from_host_double (gdb_byte *addr, const struct type *type, | |
1888 | double val) const override | |
1889 | { | |
1890 | /* We don't support conversions between target decimal floating-point | |
1891 | types and the host double type. */ | |
1892 | gdb_assert_not_reached ("invalid operation on decimal float"); | |
1893 | } | |
1894 | void convert (const gdb_byte *from, const struct type *from_type, | |
1895 | gdb_byte *to, const struct type *to_type) const override; | |
1896 | ||
1897 | void binop (enum exp_opcode opcode, | |
1898 | const gdb_byte *x, const struct type *type_x, | |
1899 | const gdb_byte *y, const struct type *type_y, | |
1900 | gdb_byte *res, const struct type *type_res) const override; | |
1901 | int compare (const gdb_byte *x, const struct type *type_x, | |
1902 | const gdb_byte *y, const struct type *type_y) const override; | |
1903 | }; | |
1904 | ||
1cfb73db UW |
1905 | /* Convert decimal type to its string representation. LEN is the length |
1906 | of the decimal type, 4 bytes for decimal32, 8 bytes for decimal64 and | |
1907 | 16 bytes for decimal128. */ | |
7a26362d UW |
1908 | std::string |
1909 | decimal_float_ops::to_string (const gdb_byte *addr, const struct type *type, | |
1910 | const char *format = nullptr) const | |
1cfb73db UW |
1911 | { |
1912 | gdb_byte dec[16]; | |
1913 | ||
7a26362d | 1914 | match_endianness (addr, type, dec); |
1cfb73db UW |
1915 | |
1916 | if (format != nullptr) | |
1917 | { | |
1918 | /* We don't handle format strings (yet). If the host printf supports | |
1919 | decimal floating point types, just use this. Otherwise, fall back | |
1920 | to printing the number while ignoring the format string. */ | |
1921 | #if defined (PRINTF_HAS_DECFLOAT) | |
1922 | /* FIXME: This makes unwarranted assumptions about the host ABI! */ | |
1923 | return string_printf (format, dec); | |
1924 | #endif | |
1925 | } | |
1926 | ||
1927 | std::string result; | |
1928 | result.resize (MAX_DECIMAL_STRING); | |
1929 | ||
7a26362d | 1930 | switch (TYPE_LENGTH (type)) |
1cfb73db UW |
1931 | { |
1932 | case 4: | |
1933 | decimal32ToString ((decimal32 *) dec, &result[0]); | |
1934 | break; | |
1935 | case 8: | |
1936 | decimal64ToString ((decimal64 *) dec, &result[0]); | |
1937 | break; | |
1938 | case 16: | |
1939 | decimal128ToString ((decimal128 *) dec, &result[0]); | |
1940 | break; | |
1941 | default: | |
1942 | error (_("Unknown decimal floating point type.")); | |
1943 | break; | |
1944 | } | |
1945 | ||
1946 | return result; | |
1947 | } | |
1948 | ||
1949 | /* Convert the string form of a decimal value to its decimal representation. | |
1950 | LEN is the length of the decimal type, 4 bytes for decimal32, 8 bytes for | |
1951 | decimal64 and 16 bytes for decimal128. */ | |
7a26362d UW |
1952 | bool |
1953 | decimal_float_ops::from_string (gdb_byte *addr, const struct type *type, | |
1954 | const std::string &string) const | |
1cfb73db UW |
1955 | { |
1956 | decContext set; | |
1957 | gdb_byte dec[16]; | |
1958 | ||
7a26362d | 1959 | set_decnumber_context (&set, type); |
1cfb73db | 1960 | |
7a26362d | 1961 | switch (TYPE_LENGTH (type)) |
1cfb73db UW |
1962 | { |
1963 | case 4: | |
1964 | decimal32FromString ((decimal32 *) dec, string.c_str (), &set); | |
1965 | break; | |
1966 | case 8: | |
1967 | decimal64FromString ((decimal64 *) dec, string.c_str (), &set); | |
1968 | break; | |
1969 | case 16: | |
1970 | decimal128FromString ((decimal128 *) dec, string.c_str (), &set); | |
1971 | break; | |
1972 | default: | |
1973 | error (_("Unknown decimal floating point type.")); | |
1974 | break; | |
1975 | } | |
1976 | ||
7a26362d | 1977 | match_endianness (dec, type, addr); |
1cfb73db UW |
1978 | |
1979 | /* Check for errors in the DFP operation. */ | |
1980 | decimal_check_errors (&set); | |
1981 | ||
1982 | return true; | |
1983 | } | |
1984 | ||
1985 | /* Converts a LONGEST to a decimal float of specified LEN bytes. */ | |
7a26362d UW |
1986 | void |
1987 | decimal_float_ops::from_longest (gdb_byte *addr, const struct type *type, | |
1988 | LONGEST from) const | |
1cfb73db | 1989 | { |
1cfb73db | 1990 | decNumber number; |
d7236961 | 1991 | |
1cfb73db UW |
1992 | if ((int32_t) from != from) |
1993 | /* libdecnumber can convert only 32-bit integers. */ | |
1994 | error (_("Conversion of large integer to a " | |
1995 | "decimal floating type is not supported.")); | |
1996 | ||
1997 | decNumberFromInt32 (&number, (int32_t) from); | |
1998 | ||
7a26362d | 1999 | decimal_from_number (&number, addr, type); |
1cfb73db UW |
2000 | } |
2001 | ||
2002 | /* Converts a ULONGEST to a decimal float of specified LEN bytes. */ | |
7a26362d UW |
2003 | void |
2004 | decimal_float_ops::from_ulongest (gdb_byte *addr, const struct type *type, | |
2005 | ULONGEST from) const | |
1cfb73db | 2006 | { |
1cfb73db UW |
2007 | decNumber number; |
2008 | ||
2009 | if ((uint32_t) from != from) | |
2010 | /* libdecnumber can convert only 32-bit integers. */ | |
2011 | error (_("Conversion of large integer to a " | |
2012 | "decimal floating type is not supported.")); | |
2013 | ||
2014 | decNumberFromUInt32 (&number, (uint32_t) from); | |
2015 | ||
7a26362d | 2016 | decimal_from_number (&number, addr, type); |
1cfb73db UW |
2017 | } |
2018 | ||
2019 | /* Converts a decimal float of LEN bytes to a LONGEST. */ | |
7a26362d UW |
2020 | LONGEST |
2021 | decimal_float_ops::to_longest (const gdb_byte *addr, | |
2022 | const struct type *type) const | |
1cfb73db UW |
2023 | { |
2024 | /* libdecnumber has a function to convert from decimal to integer, but | |
2025 | it doesn't work when the decimal number has a fractional part. */ | |
7a26362d | 2026 | std::string str = to_string (addr, type); |
1cfb73db UW |
2027 | return strtoll (str.c_str (), NULL, 10); |
2028 | } | |
2029 | ||
2030 | /* Perform operation OP with operands X and Y with sizes LEN_X and LEN_Y | |
2031 | and byte orders BYTE_ORDER_X and BYTE_ORDER_Y, and store value in | |
2032 | RESULT with size LEN_RESULT and byte order BYTE_ORDER_RESULT. */ | |
7a26362d UW |
2033 | void |
2034 | decimal_float_ops::binop (enum exp_opcode op, | |
2035 | const gdb_byte *x, const struct type *type_x, | |
2036 | const gdb_byte *y, const struct type *type_y, | |
2037 | gdb_byte *res, const struct type *type_res) const | |
1cfb73db UW |
2038 | { |
2039 | decContext set; | |
2040 | decNumber number1, number2, number3; | |
1cfb73db | 2041 | |
7a26362d UW |
2042 | decimal_to_number (x, type_x, &number1); |
2043 | decimal_to_number (y, type_y, &number2); | |
1cfb73db | 2044 | |
7a26362d | 2045 | set_decnumber_context (&set, type_res); |
1cfb73db UW |
2046 | |
2047 | switch (op) | |
2048 | { | |
2049 | case BINOP_ADD: | |
2050 | decNumberAdd (&number3, &number1, &number2, &set); | |
2051 | break; | |
2052 | case BINOP_SUB: | |
2053 | decNumberSubtract (&number3, &number1, &number2, &set); | |
2054 | break; | |
2055 | case BINOP_MUL: | |
2056 | decNumberMultiply (&number3, &number1, &number2, &set); | |
2057 | break; | |
2058 | case BINOP_DIV: | |
2059 | decNumberDivide (&number3, &number1, &number2, &set); | |
2060 | break; | |
2061 | case BINOP_EXP: | |
2062 | decNumberPower (&number3, &number1, &number2, &set); | |
2063 | break; | |
2064 | default: | |
2065 | error (_("Operation not valid for decimal floating point number.")); | |
2066 | break; | |
2067 | } | |
2068 | ||
2069 | /* Check for errors in the DFP operation. */ | |
2070 | decimal_check_errors (&set); | |
2071 | ||
7a26362d | 2072 | decimal_from_number (&number3, res, type_res); |
1cfb73db UW |
2073 | } |
2074 | ||
2075 | /* Compares two numbers numerically. If X is less than Y then the return value | |
2076 | will be -1. If they are equal, then the return value will be 0. If X is | |
2077 | greater than the Y then the return value will be 1. */ | |
7a26362d UW |
2078 | int |
2079 | decimal_float_ops::compare (const gdb_byte *x, const struct type *type_x, | |
2080 | const gdb_byte *y, const struct type *type_y) const | |
1cfb73db UW |
2081 | { |
2082 | decNumber number1, number2, result; | |
2083 | decContext set; | |
7a26362d | 2084 | const struct type *type_result; |
1cfb73db | 2085 | |
7a26362d UW |
2086 | decimal_to_number (x, type_x, &number1); |
2087 | decimal_to_number (y, type_y, &number2); | |
1cfb73db UW |
2088 | |
2089 | /* Perform the comparison in the larger of the two sizes. */ | |
7a26362d UW |
2090 | type_result = TYPE_LENGTH (type_x) > TYPE_LENGTH (type_y) ? type_x : type_y; |
2091 | set_decnumber_context (&set, type_result); | |
1cfb73db UW |
2092 | |
2093 | decNumberCompare (&result, &number1, &number2, &set); | |
2094 | ||
2095 | /* Check for errors in the DFP operation. */ | |
2096 | decimal_check_errors (&set); | |
2097 | ||
2098 | if (decNumberIsNaN (&result)) | |
2099 | error (_("Comparison with an invalid number (NaN).")); | |
2100 | else if (decNumberIsZero (&result)) | |
2101 | return 0; | |
2102 | else if (decNumberIsNegative (&result)) | |
2103 | return -1; | |
2104 | else | |
2105 | return 1; | |
2106 | } | |
2107 | ||
2108 | /* Convert a decimal value from a decimal type with LEN_FROM bytes to a | |
2109 | decimal type with LEN_TO bytes. */ | |
7a26362d UW |
2110 | void |
2111 | decimal_float_ops::convert (const gdb_byte *from, const struct type *from_type, | |
2112 | gdb_byte *to, const struct type *to_type) const | |
1cfb73db UW |
2113 | { |
2114 | decNumber number; | |
1cfb73db | 2115 | |
7a26362d UW |
2116 | decimal_to_number (from, from_type, &number); |
2117 | decimal_from_number (&number, to, to_type); | |
1cfb73db UW |
2118 | } |
2119 | ||
2120 | ||
70100014 UW |
2121 | /* Typed floating-point routines. These routines operate on floating-point |
2122 | values in target format, represented by a byte buffer interpreted as a | |
2123 | "struct type", which may be either a binary or decimal floating-point | |
2124 | type (TYPE_CODE_FLT or TYPE_CODE_DECFLOAT). */ | |
2125 | ||
7a26362d UW |
2126 | /* Return whether TYPE1 and TYPE2 are of the same category (binary or |
2127 | decimal floating-point). */ | |
2128 | static bool | |
2129 | target_float_same_category_p (const struct type *type1, | |
2130 | const struct type *type2) | |
2131 | { | |
2132 | return TYPE_CODE (type1) == TYPE_CODE (type2); | |
2133 | } | |
2134 | ||
2135 | /* Return whether TYPE1 and TYPE2 use the same floating-point format. */ | |
2136 | static bool | |
2137 | target_float_same_format_p (const struct type *type1, | |
2138 | const struct type *type2) | |
2139 | { | |
2140 | if (!target_float_same_category_p (type1, type2)) | |
2141 | return false; | |
2142 | ||
2143 | switch (TYPE_CODE (type1)) | |
2144 | { | |
2145 | case TYPE_CODE_FLT: | |
2146 | return floatformat_from_type (type1) == floatformat_from_type (type2); | |
2147 | ||
2148 | case TYPE_CODE_DECFLOAT: | |
2149 | return (TYPE_LENGTH (type1) == TYPE_LENGTH (type2) | |
2150 | && (gdbarch_byte_order (get_type_arch (type1)) | |
2151 | == gdbarch_byte_order (get_type_arch (type2)))); | |
2152 | ||
2153 | default: | |
2154 | gdb_assert_not_reached ("unexpected type code"); | |
2155 | } | |
2156 | } | |
2157 | ||
2158 | /* Return the size (without padding) of the target floating-point | |
2159 | format used by TYPE. */ | |
2160 | static int | |
2161 | target_float_format_length (const struct type *type) | |
2162 | { | |
2163 | switch (TYPE_CODE (type)) | |
2164 | { | |
2165 | case TYPE_CODE_FLT: | |
2166 | return floatformat_totalsize_bytes (floatformat_from_type (type)); | |
2167 | ||
2168 | case TYPE_CODE_DECFLOAT: | |
2169 | return TYPE_LENGTH (type); | |
2170 | ||
2171 | default: | |
2172 | gdb_assert_not_reached ("unexpected type code"); | |
2173 | } | |
2174 | } | |
2175 | ||
2176 | /* Identifiers of available host-side intermediate formats. These must | |
2177 | be sorted so the that the more "general" kinds come later. */ | |
2178 | enum target_float_ops_kind | |
2179 | { | |
2180 | /* Target binary floating-point formats that match a host format. */ | |
2181 | host_float = 0, | |
2182 | host_double, | |
2183 | host_long_double, | |
2184 | /* Any other target binary floating-point format. */ | |
2185 | binary, | |
2186 | /* Any target decimal floating-point format. */ | |
2187 | decimal | |
2188 | }; | |
2189 | ||
2190 | /* Given a target type TYPE, choose the best host-side intermediate format | |
2191 | to perform operations on TYPE in. */ | |
2192 | static enum target_float_ops_kind | |
2193 | get_target_float_ops_kind (const struct type *type) | |
2194 | { | |
2195 | switch (TYPE_CODE (type)) | |
2196 | { | |
2197 | case TYPE_CODE_FLT: | |
2198 | { | |
2199 | const struct floatformat *fmt = floatformat_from_type (type); | |
2200 | ||
2201 | /* Binary floating-point formats matching a host format. */ | |
2202 | if (fmt == host_float_format) | |
2203 | return target_float_ops_kind::host_float; | |
2204 | if (fmt == host_double_format) | |
2205 | return target_float_ops_kind::host_double; | |
2206 | if (fmt == host_long_double_format) | |
2207 | return target_float_ops_kind::host_long_double; | |
2208 | ||
2209 | /* Any other binary floating-point format. */ | |
2210 | return target_float_ops_kind::binary; | |
2211 | } | |
2212 | ||
2213 | case TYPE_CODE_DECFLOAT: | |
2214 | { | |
2215 | /* Any decimal floating-point format. */ | |
2216 | return target_float_ops_kind::decimal; | |
2217 | } | |
2218 | ||
2219 | default: | |
2220 | gdb_assert_not_reached ("unexpected type code"); | |
2221 | } | |
2222 | } | |
2223 | ||
2224 | /* Return target_float_ops to peform operations for KIND. */ | |
2225 | static const target_float_ops * | |
2226 | get_target_float_ops (enum target_float_ops_kind kind) | |
2227 | { | |
2228 | switch (kind) | |
2229 | { | |
2230 | /* If the type format matches one of the host floating-point | |
2231 | types, use that type as intermediate format. */ | |
2232 | case target_float_ops_kind::host_float: | |
2233 | { | |
2234 | static host_float_ops<float> host_float_ops_float; | |
2235 | return &host_float_ops_float; | |
2236 | } | |
2237 | ||
2238 | case target_float_ops_kind::host_double: | |
2239 | { | |
2240 | static host_float_ops<double> host_float_ops_double; | |
2241 | return &host_float_ops_double; | |
2242 | } | |
2243 | ||
2244 | case target_float_ops_kind::host_long_double: | |
2245 | { | |
2246 | static host_float_ops<long double> host_float_ops_long_double; | |
2247 | return &host_float_ops_long_double; | |
2248 | } | |
2249 | ||
2250 | /* For binary floating-point formats that do not match any host format, | |
2400729e UW |
2251 | use mpfr_t as intermediate format to provide precise target-floating |
2252 | point emulation. However, if the MPFR library is not availabe, | |
7a26362d UW |
2253 | use the largest host floating-point type as intermediate format. */ |
2254 | case target_float_ops_kind::binary: | |
2255 | { | |
2400729e UW |
2256 | #ifdef HAVE_LIBMPFR |
2257 | static mpfr_float_ops binary_float_ops; | |
2258 | #else | |
7a26362d | 2259 | static host_float_ops<long double> binary_float_ops; |
2400729e | 2260 | #endif |
7a26362d UW |
2261 | return &binary_float_ops; |
2262 | } | |
2263 | ||
2264 | /* For decimal floating-point types, always use the libdecnumber | |
2265 | decNumber type as intermediate format. */ | |
2266 | case target_float_ops_kind::decimal: | |
2267 | { | |
2268 | static decimal_float_ops decimal_float_ops; | |
2269 | return &decimal_float_ops; | |
2270 | } | |
2271 | ||
2272 | default: | |
2273 | gdb_assert_not_reached ("unexpected target_float_ops_kind"); | |
2274 | } | |
2275 | } | |
2276 | ||
2277 | /* Given a target type TYPE, determine the best host-side intermediate format | |
2278 | to perform operations on TYPE in. */ | |
2279 | static const target_float_ops * | |
2280 | get_target_float_ops (const struct type *type) | |
2281 | { | |
2282 | enum target_float_ops_kind kind = get_target_float_ops_kind (type); | |
2283 | return get_target_float_ops (kind); | |
2284 | } | |
2285 | ||
2286 | /* The same for operations involving two target types TYPE1 and TYPE2. */ | |
2287 | static const target_float_ops * | |
2288 | get_target_float_ops (const struct type *type1, const struct type *type2) | |
2289 | { | |
2290 | gdb_assert (TYPE_CODE (type1) == TYPE_CODE (type2)); | |
2291 | ||
2292 | enum target_float_ops_kind kind1 = get_target_float_ops_kind (type1); | |
2293 | enum target_float_ops_kind kind2 = get_target_float_ops_kind (type2); | |
2294 | ||
2295 | /* Given the way the kinds are sorted, we simply choose the larger one; | |
2296 | this will be able to hold values of either type. */ | |
2297 | return get_target_float_ops (std::max (kind1, kind2)); | |
2298 | } | |
2299 | ||
70100014 UW |
2300 | /* Return whether the byte-stream ADDR holds a valid value of |
2301 | floating-point type TYPE. */ | |
2302 | bool | |
2303 | target_float_is_valid (const gdb_byte *addr, const struct type *type) | |
2304 | { | |
2305 | if (TYPE_CODE (type) == TYPE_CODE_FLT) | |
2306 | return floatformat_is_valid (floatformat_from_type (type), addr); | |
2307 | ||
2308 | if (TYPE_CODE (type) == TYPE_CODE_DECFLOAT) | |
2309 | return true; | |
2310 | ||
2311 | gdb_assert_not_reached ("unexpected type code"); | |
2312 | } | |
2313 | ||
2314 | /* Return whether the byte-stream ADDR, interpreted as floating-point | |
2315 | type TYPE, is numerically equal to zero (of either sign). */ | |
2316 | bool | |
2317 | target_float_is_zero (const gdb_byte *addr, const struct type *type) | |
2318 | { | |
2319 | if (TYPE_CODE (type) == TYPE_CODE_FLT) | |
2320 | return (floatformat_classify (floatformat_from_type (type), addr) | |
2321 | == float_zero); | |
2322 | ||
2323 | if (TYPE_CODE (type) == TYPE_CODE_DECFLOAT) | |
7a26362d | 2324 | return decimal_is_zero (addr, type); |
70100014 UW |
2325 | |
2326 | gdb_assert_not_reached ("unexpected type code"); | |
2327 | } | |
2328 | ||
f69fdf9b UW |
2329 | /* Convert the byte-stream ADDR, interpreted as floating-point type TYPE, |
2330 | to a string, optionally using the print format FORMAT. */ | |
2331 | std::string | |
2332 | target_float_to_string (const gdb_byte *addr, const struct type *type, | |
2333 | const char *format) | |
2334 | { | |
7a26362d UW |
2335 | /* Unless we need to adhere to a specific format, provide special |
2336 | output for special cases of binary floating-point numbers. */ | |
2337 | if (format == nullptr && TYPE_CODE (type) == TYPE_CODE_FLT) | |
2338 | { | |
2339 | const struct floatformat *fmt = floatformat_from_type (type); | |
f69fdf9b | 2340 | |
7a26362d UW |
2341 | /* Detect invalid representations. */ |
2342 | if (!floatformat_is_valid (fmt, addr)) | |
2343 | return "<invalid float value>"; | |
f69fdf9b | 2344 | |
7a26362d UW |
2345 | /* Handle NaN and Inf. */ |
2346 | enum float_kind kind = floatformat_classify (fmt, addr); | |
2347 | if (kind == float_nan) | |
2348 | { | |
2349 | const char *sign = floatformat_is_negative (fmt, addr)? "-" : ""; | |
2350 | const char *mantissa = floatformat_mantissa (fmt, addr); | |
2351 | return string_printf ("%snan(0x%s)", sign, mantissa); | |
2352 | } | |
2353 | else if (kind == float_infinite) | |
2354 | { | |
2355 | const char *sign = floatformat_is_negative (fmt, addr)? "-" : ""; | |
2356 | return string_printf ("%sinf", sign); | |
2357 | } | |
2358 | } | |
2359 | ||
2360 | const target_float_ops *ops = get_target_float_ops (type); | |
2361 | return ops->to_string (addr, type, format); | |
f69fdf9b UW |
2362 | } |
2363 | ||
2364 | /* Parse string STRING into a target floating-number of type TYPE and | |
2365 | store it as byte-stream ADDR. Return whether parsing succeeded. */ | |
2366 | bool | |
2367 | target_float_from_string (gdb_byte *addr, const struct type *type, | |
2368 | const std::string &string) | |
2369 | { | |
7a26362d UW |
2370 | const target_float_ops *ops = get_target_float_ops (type); |
2371 | return ops->from_string (addr, type, string); | |
f69fdf9b | 2372 | } |
50637b26 UW |
2373 | |
2374 | /* Convert the byte-stream ADDR, interpreted as floating-point type TYPE, | |
2375 | to an integer value (rounding towards zero). */ | |
2376 | LONGEST | |
2377 | target_float_to_longest (const gdb_byte *addr, const struct type *type) | |
2378 | { | |
7a26362d UW |
2379 | const target_float_ops *ops = get_target_float_ops (type); |
2380 | return ops->to_longest (addr, type); | |
50637b26 UW |
2381 | } |
2382 | ||
2383 | /* Convert signed integer VAL to a target floating-number of type TYPE | |
2384 | and store it as byte-stream ADDR. */ | |
2385 | void | |
2386 | target_float_from_longest (gdb_byte *addr, const struct type *type, | |
2387 | LONGEST val) | |
2388 | { | |
7a26362d UW |
2389 | const target_float_ops *ops = get_target_float_ops (type); |
2390 | ops->from_longest (addr, type, val); | |
50637b26 UW |
2391 | } |
2392 | ||
2393 | /* Convert unsigned integer VAL to a target floating-number of type TYPE | |
2394 | and store it as byte-stream ADDR. */ | |
2395 | void | |
2396 | target_float_from_ulongest (gdb_byte *addr, const struct type *type, | |
2397 | ULONGEST val) | |
2398 | { | |
7a26362d UW |
2399 | const target_float_ops *ops = get_target_float_ops (type); |
2400 | ops->from_ulongest (addr, type, val); | |
50637b26 UW |
2401 | } |
2402 | ||
14ad9311 UW |
2403 | /* Convert the byte-stream ADDR, interpreted as floating-point type TYPE, |
2404 | to a floating-point value in the host "double" format. */ | |
2405 | double | |
2406 | target_float_to_host_double (const gdb_byte *addr, | |
2407 | const struct type *type) | |
2408 | { | |
7a26362d UW |
2409 | const target_float_ops *ops = get_target_float_ops (type); |
2410 | return ops->to_host_double (addr, type); | |
14ad9311 UW |
2411 | } |
2412 | ||
2413 | /* Convert floating-point value VAL in the host "double" format to a target | |
2414 | floating-number of type TYPE and store it as byte-stream ADDR. */ | |
2415 | void | |
2416 | target_float_from_host_double (gdb_byte *addr, const struct type *type, | |
2417 | double val) | |
2418 | { | |
7a26362d UW |
2419 | const target_float_ops *ops = get_target_float_ops (type); |
2420 | ops->from_host_double (addr, type, val); | |
14ad9311 UW |
2421 | } |
2422 | ||
50637b26 UW |
2423 | /* Convert a floating-point number of type FROM_TYPE from the target |
2424 | byte-stream FROM to a floating-point number of type TO_TYPE, and | |
2425 | store it to the target byte-stream TO. */ | |
2426 | void | |
2427 | target_float_convert (const gdb_byte *from, const struct type *from_type, | |
2428 | gdb_byte *to, const struct type *to_type) | |
2429 | { | |
50637b26 UW |
2430 | /* We cannot directly convert between binary and decimal floating-point |
2431 | types, so go via an intermediary string. */ | |
7a26362d | 2432 | if (!target_float_same_category_p (from_type, to_type)) |
50637b26 UW |
2433 | { |
2434 | std::string str = target_float_to_string (from, from_type); | |
2435 | target_float_from_string (to, to_type, str); | |
2436 | return; | |
2437 | } | |
2438 | ||
7a26362d UW |
2439 | /* Convert between two different formats in the same category. */ |
2440 | if (!target_float_same_format_p (from_type, to_type)) | |
2441 | { | |
2442 | const target_float_ops *ops = get_target_float_ops (from_type, to_type); | |
2443 | ops->convert (from, from_type, to, to_type); | |
2444 | return; | |
2445 | } | |
2446 | ||
2447 | /* The floating-point formats match, so we simply copy the data, ensuring | |
2448 | possible padding bytes in the target buffer are zeroed out. */ | |
2449 | memset (to, 0, TYPE_LENGTH (to_type)); | |
2450 | memcpy (to, from, target_float_format_length (to_type)); | |
50637b26 | 2451 | } |
66c02b9e UW |
2452 | |
2453 | /* Perform the binary operation indicated by OPCODE, using as operands the | |
2454 | target byte streams X and Y, interpreted as floating-point numbers of | |
2455 | types TYPE_X and TYPE_Y, respectively. Convert the result to type | |
2456 | TYPE_RES and store it into the byte-stream RES. | |
2457 | ||
2458 | The three types must either be all binary floating-point types, or else | |
2459 | all decimal floating-point types. Binary and decimal floating-point | |
2460 | types cannot be mixed within a single operation. */ | |
2461 | void | |
2462 | target_float_binop (enum exp_opcode opcode, | |
2463 | const gdb_byte *x, const struct type *type_x, | |
2464 | const gdb_byte *y, const struct type *type_y, | |
2465 | gdb_byte *res, const struct type *type_res) | |
2466 | { | |
7a26362d UW |
2467 | gdb_assert (target_float_same_category_p (type_x, type_res)); |
2468 | gdb_assert (target_float_same_category_p (type_y, type_res)); | |
66c02b9e | 2469 | |
7a26362d UW |
2470 | const target_float_ops *ops = get_target_float_ops (type_x, type_y); |
2471 | ops->binop (opcode, x, type_x, y, type_y, res, type_res); | |
66c02b9e UW |
2472 | } |
2473 | ||
2474 | /* Compare the two target byte streams X and Y, interpreted as floating-point | |
2475 | numbers of types TYPE_X and TYPE_Y, respectively. Return zero if X and Y | |
2476 | are equal, -1 if X is less than Y, and 1 otherwise. | |
2477 | ||
2478 | The two types must either both be binary floating-point types, or else | |
2479 | both be decimal floating-point types. Binary and decimal floating-point | |
2480 | types cannot compared directly against each other. */ | |
2481 | int | |
2482 | target_float_compare (const gdb_byte *x, const struct type *type_x, | |
2483 | const gdb_byte *y, const struct type *type_y) | |
2484 | { | |
7a26362d | 2485 | gdb_assert (target_float_same_category_p (type_x, type_y)); |
66c02b9e | 2486 | |
7a26362d UW |
2487 | const target_float_ops *ops = get_target_float_ops (type_x, type_y); |
2488 | return ops->compare (x, type_x, y, type_y); | |
66c02b9e UW |
2489 | } |
2490 |