Commit | Line | Data |
---|---|---|
c906108c | 1 | /* Interface between GDB and target environments, including files and processes |
29e57380 | 2 | Copyright 1990-1994, 1999, 2000, 2001 Free Software Foundation, Inc. |
c906108c SS |
3 | Contributed by Cygnus Support. Written by John Gilmore. |
4 | ||
c5aa993b | 5 | This file is part of GDB. |
c906108c | 6 | |
c5aa993b JM |
7 | This program is free software; you can redistribute it and/or modify |
8 | it under the terms of the GNU General Public License as published by | |
9 | the Free Software Foundation; either version 2 of the License, or | |
10 | (at your option) any later version. | |
c906108c | 11 | |
c5aa993b JM |
12 | This program is distributed in the hope that it will be useful, |
13 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | GNU General Public License for more details. | |
c906108c | 16 | |
c5aa993b JM |
17 | You should have received a copy of the GNU General Public License |
18 | along with this program; if not, write to the Free Software | |
19 | Foundation, Inc., 59 Temple Place - Suite 330, | |
20 | Boston, MA 02111-1307, USA. */ | |
c906108c SS |
21 | |
22 | #if !defined (TARGET_H) | |
23 | #define TARGET_H | |
24 | ||
25 | /* This include file defines the interface between the main part | |
26 | of the debugger, and the part which is target-specific, or | |
27 | specific to the communications interface between us and the | |
28 | target. | |
29 | ||
30 | A TARGET is an interface between the debugger and a particular | |
31 | kind of file or process. Targets can be STACKED in STRATA, | |
32 | so that more than one target can potentially respond to a request. | |
33 | In particular, memory accesses will walk down the stack of targets | |
34 | until they find a target that is interested in handling that particular | |
35 | address. STRATA are artificial boundaries on the stack, within | |
36 | which particular kinds of targets live. Strata exist so that | |
37 | people don't get confused by pushing e.g. a process target and then | |
38 | a file target, and wondering why they can't see the current values | |
39 | of variables any more (the file target is handling them and they | |
40 | never get to the process target). So when you push a file target, | |
41 | it goes into the file stratum, which is always below the process | |
42 | stratum. */ | |
43 | ||
44 | #include "bfd.h" | |
45 | #include "symtab.h" | |
4930751a | 46 | #include "dcache.h" |
29e57380 | 47 | #include "memattr.h" |
c906108c | 48 | |
c5aa993b JM |
49 | enum strata |
50 | { | |
51 | dummy_stratum, /* The lowest of the low */ | |
52 | file_stratum, /* Executable files, etc */ | |
53 | core_stratum, /* Core dump files */ | |
54 | download_stratum, /* Downloading of remote targets */ | |
d4f3574e SS |
55 | process_stratum, /* Executing processes */ |
56 | thread_stratum /* Executing threads */ | |
c5aa993b | 57 | }; |
c906108c | 58 | |
c5aa993b JM |
59 | enum thread_control_capabilities |
60 | { | |
0d06e24b JM |
61 | tc_none = 0, /* Default: can't control thread execution. */ |
62 | tc_schedlock = 1, /* Can lock the thread scheduler. */ | |
63 | tc_switch = 2 /* Can switch the running thread on demand. */ | |
c5aa993b | 64 | }; |
c906108c SS |
65 | |
66 | /* Stuff for target_wait. */ | |
67 | ||
68 | /* Generally, what has the program done? */ | |
c5aa993b JM |
69 | enum target_waitkind |
70 | { | |
71 | /* The program has exited. The exit status is in value.integer. */ | |
72 | TARGET_WAITKIND_EXITED, | |
c906108c | 73 | |
0d06e24b JM |
74 | /* The program has stopped with a signal. Which signal is in |
75 | value.sig. */ | |
c5aa993b | 76 | TARGET_WAITKIND_STOPPED, |
c906108c | 77 | |
c5aa993b JM |
78 | /* The program has terminated with a signal. Which signal is in |
79 | value.sig. */ | |
80 | TARGET_WAITKIND_SIGNALLED, | |
c906108c | 81 | |
c5aa993b JM |
82 | /* The program is letting us know that it dynamically loaded something |
83 | (e.g. it called load(2) on AIX). */ | |
84 | TARGET_WAITKIND_LOADED, | |
c906108c | 85 | |
0d06e24b JM |
86 | /* The program has forked. A "related" process' ID is in |
87 | value.related_pid. I.e., if the child forks, value.related_pid | |
88 | is the parent's ID. */ | |
89 | ||
c5aa993b | 90 | TARGET_WAITKIND_FORKED, |
c906108c | 91 | |
0d06e24b JM |
92 | /* The program has vforked. A "related" process's ID is in |
93 | value.related_pid. */ | |
94 | ||
c5aa993b | 95 | TARGET_WAITKIND_VFORKED, |
c906108c | 96 | |
0d06e24b JM |
97 | /* The program has exec'ed a new executable file. The new file's |
98 | pathname is pointed to by value.execd_pathname. */ | |
99 | ||
c5aa993b | 100 | TARGET_WAITKIND_EXECD, |
c906108c | 101 | |
0d06e24b JM |
102 | /* The program has entered or returned from a system call. On |
103 | HP-UX, this is used in the hardware watchpoint implementation. | |
104 | The syscall's unique integer ID number is in value.syscall_id */ | |
105 | ||
c5aa993b JM |
106 | TARGET_WAITKIND_SYSCALL_ENTRY, |
107 | TARGET_WAITKIND_SYSCALL_RETURN, | |
c906108c | 108 | |
c5aa993b JM |
109 | /* Nothing happened, but we stopped anyway. This perhaps should be handled |
110 | within target_wait, but I'm not sure target_wait should be resuming the | |
111 | inferior. */ | |
c4093a6a JM |
112 | TARGET_WAITKIND_SPURIOUS, |
113 | ||
114 | /* This is used for target async and extended-async | |
115 | only. Remote_async_wait() returns this when there is an event | |
116 | on the inferior, but the rest of the world is not interested in | |
117 | it. The inferior has not stopped, but has just sent some output | |
118 | to the console, for instance. In this case, we want to go back | |
119 | to the event loop and wait there for another event from the | |
120 | inferior, rather than being stuck in the remote_async_wait() | |
121 | function. This way the event loop is responsive to other events, | |
0d06e24b | 122 | like for instance the user typing. */ |
c4093a6a | 123 | TARGET_WAITKIND_IGNORE |
c906108c SS |
124 | }; |
125 | ||
126 | /* The numbering of these signals is chosen to match traditional unix | |
127 | signals (insofar as various unices use the same numbers, anyway). | |
128 | It is also the numbering of the GDB remote protocol. Other remote | |
129 | protocols, if they use a different numbering, should make sure to | |
cd0fc7c3 | 130 | translate appropriately. |
c906108c | 131 | |
cd0fc7c3 SS |
132 | Since these numbers have actually made it out into other software |
133 | (stubs, etc.), you mustn't disturb the assigned numbering. If you | |
134 | need to add new signals here, add them to the end of the explicitly | |
135 | numbered signals. | |
136 | ||
137 | This is based strongly on Unix/POSIX signals for several reasons: | |
c906108c SS |
138 | (1) This set of signals represents a widely-accepted attempt to |
139 | represent events of this sort in a portable fashion, (2) we want a | |
140 | signal to make it from wait to child_wait to the user intact, (3) many | |
141 | remote protocols use a similar encoding. However, it is | |
142 | recognized that this set of signals has limitations (such as not | |
143 | distinguishing between various kinds of SIGSEGV, or not | |
144 | distinguishing hitting a breakpoint from finishing a single step). | |
145 | So in the future we may get around this either by adding additional | |
146 | signals for breakpoint, single-step, etc., or by adding signal | |
147 | codes; the latter seems more in the spirit of what BSD, System V, | |
148 | etc. are doing to address these issues. */ | |
149 | ||
150 | /* For an explanation of what each signal means, see | |
151 | target_signal_to_string. */ | |
152 | ||
c5aa993b JM |
153 | enum target_signal |
154 | { | |
155 | /* Used some places (e.g. stop_signal) to record the concept that | |
156 | there is no signal. */ | |
157 | TARGET_SIGNAL_0 = 0, | |
158 | TARGET_SIGNAL_FIRST = 0, | |
159 | TARGET_SIGNAL_HUP = 1, | |
160 | TARGET_SIGNAL_INT = 2, | |
161 | TARGET_SIGNAL_QUIT = 3, | |
162 | TARGET_SIGNAL_ILL = 4, | |
163 | TARGET_SIGNAL_TRAP = 5, | |
164 | TARGET_SIGNAL_ABRT = 6, | |
165 | TARGET_SIGNAL_EMT = 7, | |
166 | TARGET_SIGNAL_FPE = 8, | |
167 | TARGET_SIGNAL_KILL = 9, | |
168 | TARGET_SIGNAL_BUS = 10, | |
169 | TARGET_SIGNAL_SEGV = 11, | |
170 | TARGET_SIGNAL_SYS = 12, | |
171 | TARGET_SIGNAL_PIPE = 13, | |
172 | TARGET_SIGNAL_ALRM = 14, | |
173 | TARGET_SIGNAL_TERM = 15, | |
174 | TARGET_SIGNAL_URG = 16, | |
175 | TARGET_SIGNAL_STOP = 17, | |
176 | TARGET_SIGNAL_TSTP = 18, | |
177 | TARGET_SIGNAL_CONT = 19, | |
178 | TARGET_SIGNAL_CHLD = 20, | |
179 | TARGET_SIGNAL_TTIN = 21, | |
180 | TARGET_SIGNAL_TTOU = 22, | |
181 | TARGET_SIGNAL_IO = 23, | |
182 | TARGET_SIGNAL_XCPU = 24, | |
183 | TARGET_SIGNAL_XFSZ = 25, | |
184 | TARGET_SIGNAL_VTALRM = 26, | |
185 | TARGET_SIGNAL_PROF = 27, | |
186 | TARGET_SIGNAL_WINCH = 28, | |
187 | TARGET_SIGNAL_LOST = 29, | |
188 | TARGET_SIGNAL_USR1 = 30, | |
189 | TARGET_SIGNAL_USR2 = 31, | |
190 | TARGET_SIGNAL_PWR = 32, | |
191 | /* Similar to SIGIO. Perhaps they should have the same number. */ | |
192 | TARGET_SIGNAL_POLL = 33, | |
193 | TARGET_SIGNAL_WIND = 34, | |
194 | TARGET_SIGNAL_PHONE = 35, | |
195 | TARGET_SIGNAL_WAITING = 36, | |
196 | TARGET_SIGNAL_LWP = 37, | |
197 | TARGET_SIGNAL_DANGER = 38, | |
198 | TARGET_SIGNAL_GRANT = 39, | |
199 | TARGET_SIGNAL_RETRACT = 40, | |
200 | TARGET_SIGNAL_MSG = 41, | |
201 | TARGET_SIGNAL_SOUND = 42, | |
202 | TARGET_SIGNAL_SAK = 43, | |
203 | TARGET_SIGNAL_PRIO = 44, | |
204 | TARGET_SIGNAL_REALTIME_33 = 45, | |
205 | TARGET_SIGNAL_REALTIME_34 = 46, | |
206 | TARGET_SIGNAL_REALTIME_35 = 47, | |
207 | TARGET_SIGNAL_REALTIME_36 = 48, | |
208 | TARGET_SIGNAL_REALTIME_37 = 49, | |
209 | TARGET_SIGNAL_REALTIME_38 = 50, | |
210 | TARGET_SIGNAL_REALTIME_39 = 51, | |
211 | TARGET_SIGNAL_REALTIME_40 = 52, | |
212 | TARGET_SIGNAL_REALTIME_41 = 53, | |
213 | TARGET_SIGNAL_REALTIME_42 = 54, | |
214 | TARGET_SIGNAL_REALTIME_43 = 55, | |
215 | TARGET_SIGNAL_REALTIME_44 = 56, | |
216 | TARGET_SIGNAL_REALTIME_45 = 57, | |
217 | TARGET_SIGNAL_REALTIME_46 = 58, | |
218 | TARGET_SIGNAL_REALTIME_47 = 59, | |
219 | TARGET_SIGNAL_REALTIME_48 = 60, | |
220 | TARGET_SIGNAL_REALTIME_49 = 61, | |
221 | TARGET_SIGNAL_REALTIME_50 = 62, | |
222 | TARGET_SIGNAL_REALTIME_51 = 63, | |
223 | TARGET_SIGNAL_REALTIME_52 = 64, | |
224 | TARGET_SIGNAL_REALTIME_53 = 65, | |
225 | TARGET_SIGNAL_REALTIME_54 = 66, | |
226 | TARGET_SIGNAL_REALTIME_55 = 67, | |
227 | TARGET_SIGNAL_REALTIME_56 = 68, | |
228 | TARGET_SIGNAL_REALTIME_57 = 69, | |
229 | TARGET_SIGNAL_REALTIME_58 = 70, | |
230 | TARGET_SIGNAL_REALTIME_59 = 71, | |
231 | TARGET_SIGNAL_REALTIME_60 = 72, | |
232 | TARGET_SIGNAL_REALTIME_61 = 73, | |
233 | TARGET_SIGNAL_REALTIME_62 = 74, | |
234 | TARGET_SIGNAL_REALTIME_63 = 75, | |
235 | ||
236 | /* Used internally by Solaris threads. See signal(5) on Solaris. */ | |
237 | TARGET_SIGNAL_CANCEL = 76, | |
cd0fc7c3 | 238 | |
d4f3574e SS |
239 | /* Yes, this pains me, too. But LynxOS didn't have SIG32, and now |
240 | Linux does, and we can't disturb the numbering, since it's part | |
241 | of the protocol. Note that in some GDB's TARGET_SIGNAL_REALTIME_32 | |
242 | is number 76. */ | |
243 | TARGET_SIGNAL_REALTIME_32, | |
d57fc352 PS |
244 | /* Yet another pain, IRIX 6 has SIG64. */ |
245 | TARGET_SIGNAL_REALTIME_64, | |
d4f3574e | 246 | |
c906108c | 247 | #if defined(MACH) || defined(__MACH__) |
c5aa993b JM |
248 | /* Mach exceptions */ |
249 | TARGET_EXC_BAD_ACCESS, | |
250 | TARGET_EXC_BAD_INSTRUCTION, | |
251 | TARGET_EXC_ARITHMETIC, | |
252 | TARGET_EXC_EMULATION, | |
253 | TARGET_EXC_SOFTWARE, | |
254 | TARGET_EXC_BREAKPOINT, | |
c906108c | 255 | #endif |
c5aa993b | 256 | TARGET_SIGNAL_INFO, |
c906108c | 257 | |
c5aa993b JM |
258 | /* Some signal we don't know about. */ |
259 | TARGET_SIGNAL_UNKNOWN, | |
c906108c | 260 | |
c5aa993b JM |
261 | /* Use whatever signal we use when one is not specifically specified |
262 | (for passing to proceed and so on). */ | |
263 | TARGET_SIGNAL_DEFAULT, | |
c906108c | 264 | |
c5aa993b JM |
265 | /* Last and unused enum value, for sizing arrays, etc. */ |
266 | TARGET_SIGNAL_LAST | |
267 | }; | |
c906108c | 268 | |
c5aa993b JM |
269 | struct target_waitstatus |
270 | { | |
271 | enum target_waitkind kind; | |
272 | ||
273 | /* Forked child pid, execd pathname, exit status or signal number. */ | |
274 | union | |
275 | { | |
276 | int integer; | |
277 | enum target_signal sig; | |
278 | int related_pid; | |
279 | char *execd_pathname; | |
280 | int syscall_id; | |
281 | } | |
282 | value; | |
283 | }; | |
c906108c | 284 | |
2acceee2 | 285 | /* Possible types of events that the inferior handler will have to |
0d06e24b | 286 | deal with. */ |
2acceee2 JM |
287 | enum inferior_event_type |
288 | { | |
0d06e24b | 289 | /* There is a request to quit the inferior, abandon it. */ |
2acceee2 JM |
290 | INF_QUIT_REQ, |
291 | /* Process a normal inferior event which will result in target_wait | |
0d06e24b | 292 | being called. */ |
2acceee2 | 293 | INF_REG_EVENT, |
0d06e24b | 294 | /* Deal with an error on the inferior. */ |
2acceee2 | 295 | INF_ERROR, |
0d06e24b | 296 | /* We are called because a timer went off. */ |
2acceee2 | 297 | INF_TIMER, |
0d06e24b | 298 | /* We are called to do stuff after the inferior stops. */ |
c2d11a7d JM |
299 | INF_EXEC_COMPLETE, |
300 | /* We are called to do some stuff after the inferior stops, but we | |
301 | are expected to reenter the proceed() and | |
302 | handle_inferior_event() functions. This is used only in case of | |
0d06e24b | 303 | 'step n' like commands. */ |
c2d11a7d | 304 | INF_EXEC_CONTINUE |
2acceee2 JM |
305 | }; |
306 | ||
c906108c | 307 | /* Return the string for a signal. */ |
a14ed312 | 308 | extern char *target_signal_to_string (enum target_signal); |
c906108c SS |
309 | |
310 | /* Return the name (SIGHUP, etc.) for a signal. */ | |
a14ed312 | 311 | extern char *target_signal_to_name (enum target_signal); |
c906108c SS |
312 | |
313 | /* Given a name (SIGHUP, etc.), return its signal. */ | |
a14ed312 | 314 | enum target_signal target_signal_from_name (char *); |
c906108c | 315 | \f |
c5aa993b | 316 | |
c906108c SS |
317 | /* If certain kinds of activity happen, target_wait should perform |
318 | callbacks. */ | |
319 | /* Right now we just call (*TARGET_ACTIVITY_FUNCTION) if I/O is possible | |
0d06e24b | 320 | on TARGET_ACTIVITY_FD. */ |
c906108c SS |
321 | extern int target_activity_fd; |
322 | /* Returns zero to leave the inferior alone, one to interrupt it. */ | |
507f3c78 | 323 | extern int (*target_activity_function) (void); |
c906108c | 324 | \f |
0d06e24b JM |
325 | struct thread_info; /* fwd decl for parameter list below: */ |
326 | ||
c906108c | 327 | struct target_ops |
c5aa993b JM |
328 | { |
329 | char *to_shortname; /* Name this target type */ | |
330 | char *to_longname; /* Name for printing */ | |
331 | char *to_doc; /* Documentation. Does not include trailing | |
c906108c | 332 | newline, and starts with a one-line descrip- |
0d06e24b | 333 | tion (probably similar to to_longname). */ |
507f3c78 KB |
334 | void (*to_open) (char *, int); |
335 | void (*to_close) (int); | |
336 | void (*to_attach) (char *, int); | |
337 | void (*to_post_attach) (int); | |
338 | void (*to_require_attach) (char *, int); | |
339 | void (*to_detach) (char *, int); | |
340 | void (*to_require_detach) (int, char *, int); | |
341 | void (*to_resume) (int, int, enum target_signal); | |
342 | int (*to_wait) (int, struct target_waitstatus *); | |
343 | void (*to_post_wait) (int, int); | |
344 | void (*to_fetch_registers) (int); | |
345 | void (*to_store_registers) (int); | |
346 | void (*to_prepare_to_store) (void); | |
c5aa993b JM |
347 | |
348 | /* Transfer LEN bytes of memory between GDB address MYADDR and | |
349 | target address MEMADDR. If WRITE, transfer them to the target, else | |
350 | transfer them from the target. TARGET is the target from which we | |
351 | get this function. | |
352 | ||
353 | Return value, N, is one of the following: | |
354 | ||
355 | 0 means that we can't handle this. If errno has been set, it is the | |
356 | error which prevented us from doing it (FIXME: What about bfd_error?). | |
357 | ||
358 | positive (call it N) means that we have transferred N bytes | |
359 | starting at MEMADDR. We might be able to handle more bytes | |
360 | beyond this length, but no promises. | |
361 | ||
362 | negative (call its absolute value N) means that we cannot | |
363 | transfer right at MEMADDR, but we could transfer at least | |
364 | something at MEMADDR + N. */ | |
365 | ||
507f3c78 | 366 | int (*to_xfer_memory) (CORE_ADDR memaddr, char *myaddr, |
29e57380 C |
367 | int len, int write, |
368 | struct mem_attrib *attrib, | |
369 | struct target_ops *target); | |
c906108c SS |
370 | |
371 | #if 0 | |
c5aa993b | 372 | /* Enable this after 4.12. */ |
c906108c | 373 | |
c5aa993b JM |
374 | /* Search target memory. Start at STARTADDR and take LEN bytes of |
375 | target memory, and them with MASK, and compare to DATA. If they | |
376 | match, set *ADDR_FOUND to the address we found it at, store the data | |
377 | we found at LEN bytes starting at DATA_FOUND, and return. If | |
378 | not, add INCREMENT to the search address and keep trying until | |
379 | the search address is outside of the range [LORANGE,HIRANGE). | |
c906108c | 380 | |
0d06e24b JM |
381 | If we don't find anything, set *ADDR_FOUND to (CORE_ADDR)0 and |
382 | return. */ | |
383 | ||
507f3c78 KB |
384 | void (*to_search) (int len, char *data, char *mask, |
385 | CORE_ADDR startaddr, int increment, | |
386 | CORE_ADDR lorange, CORE_ADDR hirange, | |
387 | CORE_ADDR * addr_found, char *data_found); | |
c906108c SS |
388 | |
389 | #define target_search(len, data, mask, startaddr, increment, lorange, hirange, addr_found, data_found) \ | |
0d06e24b JM |
390 | (*current_target.to_search) (len, data, mask, startaddr, increment, \ |
391 | lorange, hirange, addr_found, data_found) | |
c5aa993b JM |
392 | #endif /* 0 */ |
393 | ||
507f3c78 KB |
394 | void (*to_files_info) (struct target_ops *); |
395 | int (*to_insert_breakpoint) (CORE_ADDR, char *); | |
396 | int (*to_remove_breakpoint) (CORE_ADDR, char *); | |
397 | void (*to_terminal_init) (void); | |
398 | void (*to_terminal_inferior) (void); | |
399 | void (*to_terminal_ours_for_output) (void); | |
400 | void (*to_terminal_ours) (void); | |
401 | void (*to_terminal_info) (char *, int); | |
402 | void (*to_kill) (void); | |
403 | void (*to_load) (char *, int); | |
404 | int (*to_lookup_symbol) (char *, CORE_ADDR *); | |
405 | void (*to_create_inferior) (char *, char *, char **); | |
406 | void (*to_post_startup_inferior) (int); | |
407 | void (*to_acknowledge_created_inferior) (int); | |
408 | void (*to_clone_and_follow_inferior) (int, int *); | |
409 | void (*to_post_follow_inferior_by_clone) (void); | |
410 | int (*to_insert_fork_catchpoint) (int); | |
411 | int (*to_remove_fork_catchpoint) (int); | |
412 | int (*to_insert_vfork_catchpoint) (int); | |
413 | int (*to_remove_vfork_catchpoint) (int); | |
414 | int (*to_has_forked) (int, int *); | |
415 | int (*to_has_vforked) (int, int *); | |
416 | int (*to_can_follow_vfork_prior_to_exec) (void); | |
417 | void (*to_post_follow_vfork) (int, int, int, int); | |
418 | int (*to_insert_exec_catchpoint) (int); | |
419 | int (*to_remove_exec_catchpoint) (int); | |
420 | int (*to_has_execd) (int, char **); | |
421 | int (*to_reported_exec_events_per_exec_call) (void); | |
422 | int (*to_has_syscall_event) (int, enum target_waitkind *, int *); | |
423 | int (*to_has_exited) (int, int, int *); | |
424 | void (*to_mourn_inferior) (void); | |
425 | int (*to_can_run) (void); | |
426 | void (*to_notice_signals) (int pid); | |
427 | int (*to_thread_alive) (int pid); | |
428 | void (*to_find_new_threads) (void); | |
429 | char *(*to_pid_to_str) (int); | |
430 | char *(*to_extra_thread_info) (struct thread_info *); | |
431 | void (*to_stop) (void); | |
432 | int (*to_query) (int /*char */ , char *, char *, int *); | |
d9fcf2fb | 433 | void (*to_rcmd) (char *command, struct ui_file *output); |
507f3c78 KB |
434 | struct symtab_and_line *(*to_enable_exception_callback) (enum |
435 | exception_event_kind, | |
436 | int); | |
437 | struct exception_event_record *(*to_get_current_exception_event) (void); | |
438 | char *(*to_pid_to_exec_file) (int pid); | |
439 | char *(*to_core_file_to_sym_file) (char *); | |
c5aa993b JM |
440 | enum strata to_stratum; |
441 | struct target_ops | |
442 | *DONT_USE; /* formerly to_next */ | |
443 | int to_has_all_memory; | |
444 | int to_has_memory; | |
445 | int to_has_stack; | |
446 | int to_has_registers; | |
447 | int to_has_execution; | |
448 | int to_has_thread_control; /* control thread execution */ | |
c5aa993b JM |
449 | struct section_table |
450 | *to_sections; | |
451 | struct section_table | |
452 | *to_sections_end; | |
6426a772 JM |
453 | /* ASYNC target controls */ |
454 | int (*to_can_async_p) (void); | |
455 | int (*to_is_async_p) (void); | |
0d06e24b JM |
456 | void (*to_async) (void (*cb) (enum inferior_event_type, void *context), |
457 | void *context); | |
ed9a39eb | 458 | int to_async_mask_value; |
c5aa993b | 459 | int to_magic; |
0d06e24b JM |
460 | /* Need sub-structure for target machine related rather than comm related? |
461 | */ | |
c5aa993b | 462 | }; |
c906108c SS |
463 | |
464 | /* Magic number for checking ops size. If a struct doesn't end with this | |
465 | number, somebody changed the declaration but didn't change all the | |
466 | places that initialize one. */ | |
467 | ||
468 | #define OPS_MAGIC 3840 | |
469 | ||
470 | /* The ops structure for our "current" target process. This should | |
471 | never be NULL. If there is no target, it points to the dummy_target. */ | |
472 | ||
c5aa993b | 473 | extern struct target_ops current_target; |
c906108c SS |
474 | |
475 | /* An item on the target stack. */ | |
476 | ||
477 | struct target_stack_item | |
c5aa993b JM |
478 | { |
479 | struct target_stack_item *next; | |
480 | struct target_ops *target_ops; | |
481 | }; | |
c906108c SS |
482 | |
483 | /* The target stack. */ | |
484 | ||
485 | extern struct target_stack_item *target_stack; | |
486 | ||
487 | /* Define easy words for doing these operations on our current target. */ | |
488 | ||
489 | #define target_shortname (current_target.to_shortname) | |
490 | #define target_longname (current_target.to_longname) | |
491 | ||
492 | /* The open routine takes the rest of the parameters from the command, | |
493 | and (if successful) pushes a new target onto the stack. | |
494 | Targets should supply this routine, if only to provide an error message. */ | |
0d06e24b | 495 | |
4930751a C |
496 | #define target_open(name, from_tty) \ |
497 | do { \ | |
498 | dcache_invalidate (target_dcache); \ | |
499 | (*current_target.to_open) (name, from_tty); \ | |
500 | } while (0) | |
c906108c SS |
501 | |
502 | /* Does whatever cleanup is required for a target that we are no longer | |
503 | going to be calling. Argument says whether we are quitting gdb and | |
504 | should not get hung in case of errors, or whether we want a clean | |
505 | termination even if it takes a while. This routine is automatically | |
506 | always called just before a routine is popped off the target stack. | |
507 | Closing file descriptors and freeing memory are typical things it should | |
508 | do. */ | |
509 | ||
510 | #define target_close(quitting) \ | |
0d06e24b | 511 | (*current_target.to_close) (quitting) |
c906108c SS |
512 | |
513 | /* Attaches to a process on the target side. Arguments are as passed | |
514 | to the `attach' command by the user. This routine can be called | |
515 | when the target is not on the target-stack, if the target_can_run | |
516 | routine returns 1; in that case, it must push itself onto the stack. | |
517 | Upon exit, the target should be ready for normal operations, and | |
518 | should be ready to deliver the status of the process immediately | |
519 | (without waiting) to an upcoming target_wait call. */ | |
520 | ||
521 | #define target_attach(args, from_tty) \ | |
0d06e24b | 522 | (*current_target.to_attach) (args, from_tty) |
c906108c SS |
523 | |
524 | /* The target_attach operation places a process under debugger control, | |
525 | and stops the process. | |
526 | ||
527 | This operation provides a target-specific hook that allows the | |
0d06e24b | 528 | necessary bookkeeping to be performed after an attach completes. */ |
c906108c | 529 | #define target_post_attach(pid) \ |
0d06e24b | 530 | (*current_target.to_post_attach) (pid) |
c906108c SS |
531 | |
532 | /* Attaches to a process on the target side, if not already attached. | |
533 | (If already attached, takes no action.) | |
534 | ||
535 | This operation can be used to follow the child process of a fork. | |
536 | On some targets, such child processes of an original inferior process | |
537 | are automatically under debugger control, and thus do not require an | |
538 | actual attach operation. */ | |
539 | ||
540 | #define target_require_attach(args, from_tty) \ | |
0d06e24b | 541 | (*current_target.to_require_attach) (args, from_tty) |
c906108c SS |
542 | |
543 | /* Takes a program previously attached to and detaches it. | |
544 | The program may resume execution (some targets do, some don't) and will | |
545 | no longer stop on signals, etc. We better not have left any breakpoints | |
546 | in the program or it'll die when it hits one. ARGS is arguments | |
547 | typed by the user (e.g. a signal to send the process). FROM_TTY | |
548 | says whether to be verbose or not. */ | |
549 | ||
a14ed312 | 550 | extern void target_detach (char *, int); |
c906108c SS |
551 | |
552 | /* Detaches from a process on the target side, if not already dettached. | |
553 | (If already detached, takes no action.) | |
554 | ||
555 | This operation can be used to follow the parent process of a fork. | |
556 | On some targets, such child processes of an original inferior process | |
557 | are automatically under debugger control, and thus do require an actual | |
558 | detach operation. | |
559 | ||
560 | PID is the process id of the child to detach from. | |
561 | ARGS is arguments typed by the user (e.g. a signal to send the process). | |
562 | FROM_TTY says whether to be verbose or not. */ | |
563 | ||
0d06e24b JM |
564 | #define target_require_detach(pid, args, from_tty) \ |
565 | (*current_target.to_require_detach) (pid, args, from_tty) | |
c906108c SS |
566 | |
567 | /* Resume execution of the target process PID. STEP says whether to | |
568 | single-step or to run free; SIGGNAL is the signal to be given to | |
569 | the target, or TARGET_SIGNAL_0 for no signal. The caller may not | |
570 | pass TARGET_SIGNAL_DEFAULT. */ | |
571 | ||
4930751a C |
572 | #define target_resume(pid, step, siggnal) \ |
573 | do { \ | |
574 | dcache_invalidate(target_dcache); \ | |
575 | (*current_target.to_resume) (pid, step, siggnal); \ | |
576 | } while (0) | |
c906108c SS |
577 | |
578 | /* Wait for process pid to do something. Pid = -1 to wait for any pid | |
579 | to do something. Return pid of child, or -1 in case of error; | |
580 | store status through argument pointer STATUS. Note that it is | |
581 | *not* OK to return_to_top_level out of target_wait without popping | |
582 | the debugging target from the stack; GDB isn't prepared to get back | |
583 | to the prompt with a debugging target but without the frame cache, | |
584 | stop_pc, etc., set up. */ | |
585 | ||
586 | #define target_wait(pid, status) \ | |
0d06e24b | 587 | (*current_target.to_wait) (pid, status) |
c906108c SS |
588 | |
589 | /* The target_wait operation waits for a process event to occur, and | |
590 | thereby stop the process. | |
591 | ||
592 | On some targets, certain events may happen in sequences. gdb's | |
593 | correct response to any single event of such a sequence may require | |
594 | knowledge of what earlier events in the sequence have been seen. | |
595 | ||
596 | This operation provides a target-specific hook that allows the | |
0d06e24b | 597 | necessary bookkeeping to be performed to track such sequences. */ |
c906108c SS |
598 | |
599 | #define target_post_wait(pid, status) \ | |
0d06e24b | 600 | (*current_target.to_post_wait) (pid, status) |
c906108c | 601 | |
17dee195 | 602 | /* Fetch at least register REGNO, or all regs if regno == -1. No result. */ |
c906108c SS |
603 | |
604 | #define target_fetch_registers(regno) \ | |
0d06e24b | 605 | (*current_target.to_fetch_registers) (regno) |
c906108c SS |
606 | |
607 | /* Store at least register REGNO, or all regs if REGNO == -1. | |
608 | It can store as many registers as it wants to, so target_prepare_to_store | |
609 | must have been previously called. Calls error() if there are problems. */ | |
610 | ||
611 | #define target_store_registers(regs) \ | |
0d06e24b | 612 | (*current_target.to_store_registers) (regs) |
c906108c SS |
613 | |
614 | /* Get ready to modify the registers array. On machines which store | |
615 | individual registers, this doesn't need to do anything. On machines | |
616 | which store all the registers in one fell swoop, this makes sure | |
617 | that REGISTERS contains all the registers from the program being | |
618 | debugged. */ | |
619 | ||
620 | #define target_prepare_to_store() \ | |
0d06e24b | 621 | (*current_target.to_prepare_to_store) () |
c906108c | 622 | |
4930751a C |
623 | extern DCACHE *target_dcache; |
624 | ||
29e57380 C |
625 | extern int do_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write, |
626 | struct mem_attrib *attrib); | |
4930751a | 627 | |
a14ed312 | 628 | extern int target_read_string (CORE_ADDR, char **, int, int *); |
c906108c | 629 | |
a14ed312 | 630 | extern int target_read_memory (CORE_ADDR memaddr, char *myaddr, int len); |
c906108c | 631 | |
4930751a | 632 | extern int target_write_memory (CORE_ADDR memaddr, char *myaddr, int len); |
c906108c | 633 | |
29e57380 C |
634 | extern int xfer_memory (CORE_ADDR, char *, int, int, |
635 | struct mem_attrib *, struct target_ops *); | |
c906108c | 636 | |
29e57380 C |
637 | extern int child_xfer_memory (CORE_ADDR, char *, int, int, |
638 | struct mem_attrib *, struct target_ops *); | |
c906108c | 639 | |
917317f4 JM |
640 | /* Make a single attempt at transfering LEN bytes. On a successful |
641 | transfer, the number of bytes actually transfered is returned and | |
642 | ERR is set to 0. When a transfer fails, -1 is returned (the number | |
643 | of bytes actually transfered is not defined) and ERR is set to a | |
0d06e24b | 644 | non-zero error indication. */ |
917317f4 | 645 | |
ed9a39eb JM |
646 | extern int |
647 | target_read_memory_partial (CORE_ADDR addr, char *buf, int len, int *err); | |
917317f4 | 648 | |
ed9a39eb JM |
649 | extern int |
650 | target_write_memory_partial (CORE_ADDR addr, char *buf, int len, int *err); | |
917317f4 | 651 | |
a14ed312 | 652 | extern char *child_pid_to_exec_file (int); |
c906108c | 653 | |
a14ed312 | 654 | extern char *child_core_file_to_sym_file (char *); |
c906108c SS |
655 | |
656 | #if defined(CHILD_POST_ATTACH) | |
a14ed312 | 657 | extern void child_post_attach (int); |
c906108c SS |
658 | #endif |
659 | ||
a14ed312 | 660 | extern void child_post_wait (int, int); |
c906108c | 661 | |
a14ed312 | 662 | extern void child_post_startup_inferior (int); |
c906108c | 663 | |
a14ed312 | 664 | extern void child_acknowledge_created_inferior (int); |
c906108c | 665 | |
a14ed312 | 666 | extern void child_clone_and_follow_inferior (int, int *); |
c906108c | 667 | |
a14ed312 | 668 | extern void child_post_follow_inferior_by_clone (void); |
c906108c | 669 | |
a14ed312 | 670 | extern int child_insert_fork_catchpoint (int); |
c906108c | 671 | |
a14ed312 | 672 | extern int child_remove_fork_catchpoint (int); |
c906108c | 673 | |
a14ed312 | 674 | extern int child_insert_vfork_catchpoint (int); |
c906108c | 675 | |
a14ed312 | 676 | extern int child_remove_vfork_catchpoint (int); |
c906108c | 677 | |
a14ed312 | 678 | extern int child_has_forked (int, int *); |
c906108c | 679 | |
a14ed312 | 680 | extern int child_has_vforked (int, int *); |
c906108c | 681 | |
a14ed312 | 682 | extern void child_acknowledge_created_inferior (int); |
c906108c | 683 | |
a14ed312 | 684 | extern int child_can_follow_vfork_prior_to_exec (void); |
c906108c | 685 | |
a14ed312 | 686 | extern void child_post_follow_vfork (int, int, int, int); |
c906108c | 687 | |
a14ed312 | 688 | extern int child_insert_exec_catchpoint (int); |
c906108c | 689 | |
a14ed312 | 690 | extern int child_remove_exec_catchpoint (int); |
c906108c | 691 | |
a14ed312 | 692 | extern int child_has_execd (int, char **); |
c906108c | 693 | |
a14ed312 | 694 | extern int child_reported_exec_events_per_exec_call (void); |
c906108c | 695 | |
a14ed312 | 696 | extern int child_has_syscall_event (int, enum target_waitkind *, int *); |
c906108c | 697 | |
a14ed312 | 698 | extern int child_has_exited (int, int, int *); |
c906108c | 699 | |
a14ed312 | 700 | extern int child_thread_alive (int); |
c906108c SS |
701 | |
702 | /* From exec.c */ | |
703 | ||
a14ed312 | 704 | extern void print_section_info (struct target_ops *, bfd *); |
c906108c SS |
705 | |
706 | /* Print a line about the current target. */ | |
707 | ||
708 | #define target_files_info() \ | |
0d06e24b | 709 | (*current_target.to_files_info) (¤t_target) |
c906108c SS |
710 | |
711 | /* Insert a breakpoint at address ADDR in the target machine. | |
712 | SAVE is a pointer to memory allocated for saving the | |
713 | target contents. It is guaranteed by the caller to be long enough | |
714 | to save "sizeof BREAKPOINT" bytes. Result is 0 for success, or | |
715 | an errno value. */ | |
716 | ||
717 | #define target_insert_breakpoint(addr, save) \ | |
0d06e24b | 718 | (*current_target.to_insert_breakpoint) (addr, save) |
c906108c SS |
719 | |
720 | /* Remove a breakpoint at address ADDR in the target machine. | |
721 | SAVE is a pointer to the same save area | |
722 | that was previously passed to target_insert_breakpoint. | |
723 | Result is 0 for success, or an errno value. */ | |
724 | ||
725 | #define target_remove_breakpoint(addr, save) \ | |
0d06e24b | 726 | (*current_target.to_remove_breakpoint) (addr, save) |
c906108c SS |
727 | |
728 | /* Initialize the terminal settings we record for the inferior, | |
729 | before we actually run the inferior. */ | |
730 | ||
731 | #define target_terminal_init() \ | |
0d06e24b | 732 | (*current_target.to_terminal_init) () |
c906108c SS |
733 | |
734 | /* Put the inferior's terminal settings into effect. | |
735 | This is preparation for starting or resuming the inferior. */ | |
736 | ||
737 | #define target_terminal_inferior() \ | |
0d06e24b | 738 | (*current_target.to_terminal_inferior) () |
c906108c SS |
739 | |
740 | /* Put some of our terminal settings into effect, | |
741 | enough to get proper results from our output, | |
742 | but do not change into or out of RAW mode | |
743 | so that no input is discarded. | |
744 | ||
745 | After doing this, either terminal_ours or terminal_inferior | |
746 | should be called to get back to a normal state of affairs. */ | |
747 | ||
748 | #define target_terminal_ours_for_output() \ | |
0d06e24b | 749 | (*current_target.to_terminal_ours_for_output) () |
c906108c SS |
750 | |
751 | /* Put our terminal settings into effect. | |
752 | First record the inferior's terminal settings | |
753 | so they can be restored properly later. */ | |
754 | ||
755 | #define target_terminal_ours() \ | |
0d06e24b | 756 | (*current_target.to_terminal_ours) () |
c906108c SS |
757 | |
758 | /* Print useful information about our terminal status, if such a thing | |
759 | exists. */ | |
760 | ||
761 | #define target_terminal_info(arg, from_tty) \ | |
0d06e24b | 762 | (*current_target.to_terminal_info) (arg, from_tty) |
c906108c SS |
763 | |
764 | /* Kill the inferior process. Make it go away. */ | |
765 | ||
766 | #define target_kill() \ | |
0d06e24b | 767 | (*current_target.to_kill) () |
c906108c | 768 | |
0d06e24b JM |
769 | /* Load an executable file into the target process. This is expected |
770 | to not only bring new code into the target process, but also to | |
771 | update GDB's symbol tables to match. */ | |
c906108c | 772 | |
11cf8741 | 773 | extern void target_load (char *arg, int from_tty); |
c906108c SS |
774 | |
775 | /* Look up a symbol in the target's symbol table. NAME is the symbol | |
0d06e24b JM |
776 | name. ADDRP is a CORE_ADDR * pointing to where the value of the |
777 | symbol should be returned. The result is 0 if successful, nonzero | |
778 | if the symbol does not exist in the target environment. This | |
779 | function should not call error() if communication with the target | |
780 | is interrupted, since it is called from symbol reading, but should | |
781 | return nonzero, possibly doing a complain(). */ | |
c906108c | 782 | |
0d06e24b JM |
783 | #define target_lookup_symbol(name, addrp) \ |
784 | (*current_target.to_lookup_symbol) (name, addrp) | |
c906108c SS |
785 | |
786 | /* Start an inferior process and set inferior_pid to its pid. | |
787 | EXEC_FILE is the file to run. | |
788 | ALLARGS is a string containing the arguments to the program. | |
789 | ENV is the environment vector to pass. Errors reported with error(). | |
790 | On VxWorks and various standalone systems, we ignore exec_file. */ | |
c5aa993b | 791 | |
c906108c | 792 | #define target_create_inferior(exec_file, args, env) \ |
0d06e24b | 793 | (*current_target.to_create_inferior) (exec_file, args, env) |
c906108c SS |
794 | |
795 | ||
796 | /* Some targets (such as ttrace-based HPUX) don't allow us to request | |
797 | notification of inferior events such as fork and vork immediately | |
798 | after the inferior is created. (This because of how gdb gets an | |
799 | inferior created via invoking a shell to do it. In such a scenario, | |
800 | if the shell init file has commands in it, the shell will fork and | |
801 | exec for each of those commands, and we will see each such fork | |
802 | event. Very bad.) | |
c5aa993b | 803 | |
0d06e24b JM |
804 | Such targets will supply an appropriate definition for this function. */ |
805 | ||
c906108c | 806 | #define target_post_startup_inferior(pid) \ |
0d06e24b | 807 | (*current_target.to_post_startup_inferior) (pid) |
c906108c SS |
808 | |
809 | /* On some targets, the sequence of starting up an inferior requires | |
0d06e24b JM |
810 | some synchronization between gdb and the new inferior process, PID. */ |
811 | ||
c906108c | 812 | #define target_acknowledge_created_inferior(pid) \ |
0d06e24b | 813 | (*current_target.to_acknowledge_created_inferior) (pid) |
c906108c SS |
814 | |
815 | /* An inferior process has been created via a fork() or similar | |
816 | system call. This function will clone the debugger, then ensure | |
817 | that CHILD_PID is attached to by that debugger. | |
818 | ||
819 | FOLLOWED_CHILD is set TRUE on return *for the clone debugger only*, | |
820 | and FALSE otherwise. (The original and clone debuggers can use this | |
821 | to determine which they are, if need be.) | |
822 | ||
823 | (This is not a terribly useful feature without a GUI to prevent | |
0d06e24b JM |
824 | the two debuggers from competing for shell input.) */ |
825 | ||
c906108c | 826 | #define target_clone_and_follow_inferior(child_pid,followed_child) \ |
0d06e24b | 827 | (*current_target.to_clone_and_follow_inferior) (child_pid, followed_child) |
c906108c SS |
828 | |
829 | /* This operation is intended to be used as the last in a sequence of | |
830 | steps taken when following both parent and child of a fork. This | |
831 | is used by a clone of the debugger, which will follow the child. | |
832 | ||
833 | The original debugger has detached from this process, and the | |
834 | clone has attached to it. | |
835 | ||
836 | On some targets, this requires a bit of cleanup to make it work | |
0d06e24b JM |
837 | correctly. */ |
838 | ||
c906108c | 839 | #define target_post_follow_inferior_by_clone() \ |
0d06e24b JM |
840 | (*current_target.to_post_follow_inferior_by_clone) () |
841 | ||
842 | /* On some targets, we can catch an inferior fork or vfork event when | |
843 | it occurs. These functions insert/remove an already-created | |
844 | catchpoint for such events. */ | |
c906108c | 845 | |
c906108c | 846 | #define target_insert_fork_catchpoint(pid) \ |
0d06e24b | 847 | (*current_target.to_insert_fork_catchpoint) (pid) |
c906108c SS |
848 | |
849 | #define target_remove_fork_catchpoint(pid) \ | |
0d06e24b | 850 | (*current_target.to_remove_fork_catchpoint) (pid) |
c906108c SS |
851 | |
852 | #define target_insert_vfork_catchpoint(pid) \ | |
0d06e24b | 853 | (*current_target.to_insert_vfork_catchpoint) (pid) |
c906108c SS |
854 | |
855 | #define target_remove_vfork_catchpoint(pid) \ | |
0d06e24b | 856 | (*current_target.to_remove_vfork_catchpoint) (pid) |
c906108c SS |
857 | |
858 | /* Returns TRUE if PID has invoked the fork() system call. And, | |
859 | also sets CHILD_PID to the process id of the other ("child") | |
0d06e24b JM |
860 | inferior process that was created by that call. */ |
861 | ||
c906108c | 862 | #define target_has_forked(pid,child_pid) \ |
0d06e24b JM |
863 | (*current_target.to_has_forked) (pid,child_pid) |
864 | ||
865 | /* Returns TRUE if PID has invoked the vfork() system call. And, | |
866 | also sets CHILD_PID to the process id of the other ("child") | |
867 | inferior process that was created by that call. */ | |
c906108c | 868 | |
c906108c | 869 | #define target_has_vforked(pid,child_pid) \ |
0d06e24b | 870 | (*current_target.to_has_vforked) (pid,child_pid) |
c906108c SS |
871 | |
872 | /* Some platforms (such as pre-10.20 HP-UX) don't allow us to do | |
873 | anything to a vforked child before it subsequently calls exec(). | |
874 | On such platforms, we say that the debugger cannot "follow" the | |
875 | child until it has vforked. | |
876 | ||
877 | This function should be defined to return 1 by those targets | |
878 | which can allow the debugger to immediately follow a vforked | |
0d06e24b JM |
879 | child, and 0 if they cannot. */ |
880 | ||
c906108c | 881 | #define target_can_follow_vfork_prior_to_exec() \ |
0d06e24b | 882 | (*current_target.to_can_follow_vfork_prior_to_exec) () |
c906108c SS |
883 | |
884 | /* An inferior process has been created via a vfork() system call. | |
885 | The debugger has followed the parent, the child, or both. The | |
886 | process of setting up for that follow may have required some | |
887 | target-specific trickery to track the sequence of reported events. | |
888 | If so, this function should be defined by those targets that | |
889 | require the debugger to perform cleanup or initialization after | |
0d06e24b JM |
890 | the vfork follow. */ |
891 | ||
c906108c | 892 | #define target_post_follow_vfork(parent_pid,followed_parent,child_pid,followed_child) \ |
0d06e24b | 893 | (*current_target.to_post_follow_vfork) (parent_pid,followed_parent,child_pid,followed_child) |
c906108c SS |
894 | |
895 | /* On some targets, we can catch an inferior exec event when it | |
0d06e24b JM |
896 | occurs. These functions insert/remove an already-created |
897 | catchpoint for such events. */ | |
898 | ||
c906108c | 899 | #define target_insert_exec_catchpoint(pid) \ |
0d06e24b | 900 | (*current_target.to_insert_exec_catchpoint) (pid) |
c5aa993b | 901 | |
c906108c | 902 | #define target_remove_exec_catchpoint(pid) \ |
0d06e24b | 903 | (*current_target.to_remove_exec_catchpoint) (pid) |
c906108c SS |
904 | |
905 | /* Returns TRUE if PID has invoked a flavor of the exec() system call. | |
0d06e24b JM |
906 | And, also sets EXECD_PATHNAME to the pathname of the executable |
907 | file that was passed to exec(), and is now being executed. */ | |
908 | ||
c906108c | 909 | #define target_has_execd(pid,execd_pathname) \ |
0d06e24b | 910 | (*current_target.to_has_execd) (pid,execd_pathname) |
c906108c SS |
911 | |
912 | /* Returns the number of exec events that are reported when a process | |
913 | invokes a flavor of the exec() system call on this target, if exec | |
0d06e24b JM |
914 | events are being reported. */ |
915 | ||
c906108c | 916 | #define target_reported_exec_events_per_exec_call() \ |
0d06e24b | 917 | (*current_target.to_reported_exec_events_per_exec_call) () |
c906108c SS |
918 | |
919 | /* Returns TRUE if PID has reported a syscall event. And, also sets | |
920 | KIND to the appropriate TARGET_WAITKIND_, and sets SYSCALL_ID to | |
0d06e24b JM |
921 | the unique integer ID of the syscall. */ |
922 | ||
c906108c | 923 | #define target_has_syscall_event(pid,kind,syscall_id) \ |
0d06e24b | 924 | (*current_target.to_has_syscall_event) (pid,kind,syscall_id) |
c906108c SS |
925 | |
926 | /* Returns TRUE if PID has exited. And, also sets EXIT_STATUS to the | |
0d06e24b JM |
927 | exit code of PID, if any. */ |
928 | ||
c906108c | 929 | #define target_has_exited(pid,wait_status,exit_status) \ |
0d06e24b | 930 | (*current_target.to_has_exited) (pid,wait_status,exit_status) |
c906108c SS |
931 | |
932 | /* The debugger has completed a blocking wait() call. There is now | |
0d06e24b | 933 | some process event that must be processed. This function should |
c906108c | 934 | be defined by those targets that require the debugger to perform |
0d06e24b | 935 | cleanup or internal state changes in response to the process event. */ |
c906108c SS |
936 | |
937 | /* The inferior process has died. Do what is right. */ | |
938 | ||
939 | #define target_mourn_inferior() \ | |
0d06e24b | 940 | (*current_target.to_mourn_inferior) () |
c906108c SS |
941 | |
942 | /* Does target have enough data to do a run or attach command? */ | |
943 | ||
944 | #define target_can_run(t) \ | |
0d06e24b | 945 | ((t)->to_can_run) () |
c906108c SS |
946 | |
947 | /* post process changes to signal handling in the inferior. */ | |
948 | ||
949 | #define target_notice_signals(pid) \ | |
0d06e24b | 950 | (*current_target.to_notice_signals) (pid) |
c906108c SS |
951 | |
952 | /* Check to see if a thread is still alive. */ | |
953 | ||
954 | #define target_thread_alive(pid) \ | |
0d06e24b | 955 | (*current_target.to_thread_alive) (pid) |
c906108c | 956 | |
b83266a0 SS |
957 | /* Query for new threads and add them to the thread list. */ |
958 | ||
959 | #define target_find_new_threads() \ | |
0d06e24b | 960 | (*current_target.to_find_new_threads) (); \ |
b83266a0 | 961 | |
0d06e24b JM |
962 | /* Make target stop in a continuable fashion. (For instance, under |
963 | Unix, this should act like SIGSTOP). This function is normally | |
964 | used by GUIs to implement a stop button. */ | |
c906108c SS |
965 | |
966 | #define target_stop current_target.to_stop | |
967 | ||
968 | /* Queries the target side for some information. The first argument is a | |
969 | letter specifying the type of the query, which is used to determine who | |
970 | should process it. The second argument is a string that specifies which | |
971 | information is desired and the third is a buffer that carries back the | |
972 | response from the target side. The fourth parameter is the size of the | |
0d06e24b | 973 | output buffer supplied. */ |
c5aa993b | 974 | |
c906108c | 975 | #define target_query(query_type, query, resp_buffer, bufffer_size) \ |
0d06e24b | 976 | (*current_target.to_query) (query_type, query, resp_buffer, bufffer_size) |
c906108c | 977 | |
96baa820 JM |
978 | /* Send the specified COMMAND to the target's monitor |
979 | (shell,interpreter) for execution. The result of the query is | |
0d06e24b | 980 | placed in OUTBUF. */ |
96baa820 JM |
981 | |
982 | #define target_rcmd(command, outbuf) \ | |
983 | (*current_target.to_rcmd) (command, outbuf) | |
984 | ||
985 | ||
c906108c SS |
986 | /* Get the symbol information for a breakpointable routine called when |
987 | an exception event occurs. | |
988 | Intended mainly for C++, and for those | |
989 | platforms/implementations where such a callback mechanism is available, | |
990 | e.g. HP-UX with ANSI C++ (aCC). Some compilers (e.g. g++) support | |
0d06e24b | 991 | different mechanisms for debugging exceptions. */ |
c906108c SS |
992 | |
993 | #define target_enable_exception_callback(kind, enable) \ | |
0d06e24b | 994 | (*current_target.to_enable_exception_callback) (kind, enable) |
c906108c | 995 | |
0d06e24b | 996 | /* Get the current exception event kind -- throw or catch, etc. */ |
c5aa993b | 997 | |
c906108c | 998 | #define target_get_current_exception_event() \ |
0d06e24b | 999 | (*current_target.to_get_current_exception_event) () |
c906108c SS |
1000 | |
1001 | /* Pointer to next target in the chain, e.g. a core file and an exec file. */ | |
1002 | ||
1003 | #define target_next \ | |
0d06e24b | 1004 | (current_target.to_next) |
c906108c SS |
1005 | |
1006 | /* Does the target include all of memory, or only part of it? This | |
1007 | determines whether we look up the target chain for other parts of | |
1008 | memory if this target can't satisfy a request. */ | |
1009 | ||
1010 | #define target_has_all_memory \ | |
0d06e24b | 1011 | (current_target.to_has_all_memory) |
c906108c SS |
1012 | |
1013 | /* Does the target include memory? (Dummy targets don't.) */ | |
1014 | ||
1015 | #define target_has_memory \ | |
0d06e24b | 1016 | (current_target.to_has_memory) |
c906108c SS |
1017 | |
1018 | /* Does the target have a stack? (Exec files don't, VxWorks doesn't, until | |
1019 | we start a process.) */ | |
c5aa993b | 1020 | |
c906108c | 1021 | #define target_has_stack \ |
0d06e24b | 1022 | (current_target.to_has_stack) |
c906108c SS |
1023 | |
1024 | /* Does the target have registers? (Exec files don't.) */ | |
1025 | ||
1026 | #define target_has_registers \ | |
0d06e24b | 1027 | (current_target.to_has_registers) |
c906108c SS |
1028 | |
1029 | /* Does the target have execution? Can we make it jump (through | |
1030 | hoops), or pop its stack a few times? FIXME: If this is to work that | |
1031 | way, it needs to check whether an inferior actually exists. | |
1032 | remote-udi.c and probably other targets can be the current target | |
1033 | when the inferior doesn't actually exist at the moment. Right now | |
1034 | this just tells us whether this target is *capable* of execution. */ | |
1035 | ||
1036 | #define target_has_execution \ | |
0d06e24b | 1037 | (current_target.to_has_execution) |
c906108c SS |
1038 | |
1039 | /* Can the target support the debugger control of thread execution? | |
1040 | a) Can it lock the thread scheduler? | |
1041 | b) Can it switch the currently running thread? */ | |
1042 | ||
1043 | #define target_can_lock_scheduler \ | |
0d06e24b | 1044 | (current_target.to_has_thread_control & tc_schedlock) |
c906108c SS |
1045 | |
1046 | #define target_can_switch_threads \ | |
0d06e24b | 1047 | (current_target.to_has_thread_control & tc_switch) |
c906108c | 1048 | |
6426a772 JM |
1049 | /* Can the target support asynchronous execution? */ |
1050 | #define target_can_async_p() (current_target.to_can_async_p ()) | |
1051 | ||
1052 | /* Is the target in asynchronous execution mode? */ | |
1053 | #define target_is_async_p() (current_target.to_is_async_p()) | |
1054 | ||
1055 | /* Put the target in async mode with the specified callback function. */ | |
0d06e24b JM |
1056 | #define target_async(CALLBACK,CONTEXT) \ |
1057 | (current_target.to_async((CALLBACK), (CONTEXT))) | |
43ff13b4 | 1058 | |
ed9a39eb JM |
1059 | /* This is to be used ONLY within run_stack_dummy(). It |
1060 | provides a workaround, to have inferior function calls done in | |
1061 | sychronous mode, even though the target is asynchronous. After | |
1062 | target_async_mask(0) is called, calls to target_can_async_p() will | |
1063 | return FALSE , so that target_resume() will not try to start the | |
1064 | target asynchronously. After the inferior stops, we IMMEDIATELY | |
1065 | restore the previous nature of the target, by calling | |
1066 | target_async_mask(1). After that, target_can_async_p() will return | |
1067 | TRUE. ANY OTHER USE OF THIS FEATURE IS DEPRECATED. | |
1068 | ||
1069 | FIXME ezannoni 1999-12-13: we won't need this once we move | |
1070 | the turning async on and off to the single execution commands, | |
0d06e24b | 1071 | from where it is done currently, in remote_resume(). */ |
ed9a39eb JM |
1072 | |
1073 | #define target_async_mask_value \ | |
0d06e24b | 1074 | (current_target.to_async_mask_value) |
ed9a39eb JM |
1075 | |
1076 | extern int target_async_mask (int mask); | |
1077 | ||
a14ed312 | 1078 | extern void target_link (char *, CORE_ADDR *); |
c906108c SS |
1079 | |
1080 | /* Converts a process id to a string. Usually, the string just contains | |
1081 | `process xyz', but on some systems it may contain | |
1082 | `process xyz thread abc'. */ | |
1083 | ||
ed9a39eb JM |
1084 | #undef target_pid_to_str |
1085 | #define target_pid_to_str(PID) current_target.to_pid_to_str (PID) | |
c906108c SS |
1086 | |
1087 | #ifndef target_tid_to_str | |
1088 | #define target_tid_to_str(PID) \ | |
0d06e24b | 1089 | target_pid_to_str (PID) |
a14ed312 | 1090 | extern char *normal_pid_to_str (int pid); |
c906108c | 1091 | #endif |
c5aa993b | 1092 | |
0d06e24b JM |
1093 | /* Return a short string describing extra information about PID, |
1094 | e.g. "sleeping", "runnable", "running on LWP 3". Null return value | |
1095 | is okay. */ | |
1096 | ||
1097 | #define target_extra_thread_info(TP) \ | |
1098 | (current_target.to_extra_thread_info (TP)) | |
ed9a39eb | 1099 | |
11cf8741 JM |
1100 | /* |
1101 | * New Objfile Event Hook: | |
1102 | * | |
1103 | * Sometimes a GDB component wants to get notified whenever a new | |
1104 | * objfile is loaded. Mainly this is used by thread-debugging | |
1105 | * implementations that need to know when symbols for the target | |
1106 | * thread implemenation are available. | |
1107 | * | |
1108 | * The old way of doing this is to define a macro 'target_new_objfile' | |
1109 | * that points to the function that you want to be called on every | |
1110 | * objfile/shlib load. | |
1111 | * | |
1112 | * The new way is to grab the function pointer, 'target_new_objfile_hook', | |
1113 | * and point it to the function that you want to be called on every | |
1114 | * objfile/shlib load. | |
1115 | * | |
1116 | * If multiple clients are willing to be cooperative, they can each | |
1117 | * save a pointer to the previous value of target_new_objfile_hook | |
1118 | * before modifying it, and arrange for their function to call the | |
1119 | * previous function in the chain. In that way, multiple clients | |
1120 | * can receive this notification (something like with signal handlers). | |
1121 | */ | |
c906108c | 1122 | |
507f3c78 | 1123 | extern void (*target_new_objfile_hook) (struct objfile *); |
c906108c SS |
1124 | |
1125 | #ifndef target_pid_or_tid_to_str | |
1126 | #define target_pid_or_tid_to_str(ID) \ | |
0d06e24b | 1127 | target_pid_to_str (ID) |
c906108c SS |
1128 | #endif |
1129 | ||
1130 | /* Attempts to find the pathname of the executable file | |
1131 | that was run to create a specified process. | |
1132 | ||
1133 | The process PID must be stopped when this operation is used. | |
c5aa993b | 1134 | |
c906108c SS |
1135 | If the executable file cannot be determined, NULL is returned. |
1136 | ||
1137 | Else, a pointer to a character string containing the pathname | |
1138 | is returned. This string should be copied into a buffer by | |
1139 | the client if the string will not be immediately used, or if | |
0d06e24b | 1140 | it must persist. */ |
c906108c SS |
1141 | |
1142 | #define target_pid_to_exec_file(pid) \ | |
0d06e24b | 1143 | (current_target.to_pid_to_exec_file) (pid) |
c906108c | 1144 | |
9d8a64cb | 1145 | /* Hook to call target-dependent code after reading in a new symbol table. */ |
c906108c SS |
1146 | |
1147 | #ifndef TARGET_SYMFILE_POSTREAD | |
1148 | #define TARGET_SYMFILE_POSTREAD(OBJFILE) | |
1149 | #endif | |
1150 | ||
9d8a64cb | 1151 | /* Hook to call target dependent code just after inferior target process has |
c906108c SS |
1152 | started. */ |
1153 | ||
1154 | #ifndef TARGET_CREATE_INFERIOR_HOOK | |
1155 | #define TARGET_CREATE_INFERIOR_HOOK(PID) | |
1156 | #endif | |
1157 | ||
1158 | /* Hardware watchpoint interfaces. */ | |
1159 | ||
1160 | /* Returns non-zero if we were stopped by a hardware watchpoint (memory read or | |
1161 | write). */ | |
1162 | ||
1163 | #ifndef STOPPED_BY_WATCHPOINT | |
1164 | #define STOPPED_BY_WATCHPOINT(w) 0 | |
1165 | #endif | |
1166 | ||
1167 | /* HP-UX supplies these operations, which respectively disable and enable | |
1168 | the memory page-protections that are used to implement hardware watchpoints | |
0d06e24b JM |
1169 | on that platform. See wait_for_inferior's use of these. */ |
1170 | ||
c906108c SS |
1171 | #if !defined(TARGET_DISABLE_HW_WATCHPOINTS) |
1172 | #define TARGET_DISABLE_HW_WATCHPOINTS(pid) | |
1173 | #endif | |
1174 | ||
1175 | #if !defined(TARGET_ENABLE_HW_WATCHPOINTS) | |
1176 | #define TARGET_ENABLE_HW_WATCHPOINTS(pid) | |
1177 | #endif | |
1178 | ||
0d06e24b | 1179 | /* Provide defaults for systems that don't support hardware watchpoints. */ |
c906108c SS |
1180 | |
1181 | #ifndef TARGET_HAS_HARDWARE_WATCHPOINTS | |
1182 | ||
1183 | /* Returns non-zero if we can set a hardware watchpoint of type TYPE. TYPE is | |
1184 | one of bp_hardware_watchpoint, bp_read_watchpoint, bp_write_watchpoint, or | |
1185 | bp_hardware_breakpoint. CNT is the number of such watchpoints used so far | |
1186 | (including this one?). OTHERTYPE is who knows what... */ | |
1187 | ||
1188 | #define TARGET_CAN_USE_HARDWARE_WATCHPOINT(TYPE,CNT,OTHERTYPE) 0 | |
1189 | ||
1190 | #if !defined(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT) | |
1191 | #define TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT(byte_count) \ | |
6ab3a9c9 | 1192 | ((LONGEST)(byte_count) <= REGISTER_SIZE) |
c906108c SS |
1193 | #endif |
1194 | ||
1195 | /* However, some addresses may not be profitable to use hardware to watch, | |
1196 | or may be difficult to understand when the addressed object is out of | |
1197 | scope, and hence should be unwatched. On some targets, this may have | |
1198 | severe performance penalties, such that we might as well use regular | |
1199 | watchpoints, and save (possibly precious) hardware watchpoints for other | |
0d06e24b JM |
1200 | locations. */ |
1201 | ||
c906108c SS |
1202 | #if !defined(TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT) |
1203 | #define TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT(pid,start,len) 0 | |
1204 | #endif | |
1205 | ||
1206 | ||
1207 | /* Set/clear a hardware watchpoint starting at ADDR, for LEN bytes. TYPE is 0 | |
1208 | for write, 1 for read, and 2 for read/write accesses. Returns 0 for | |
1209 | success, non-zero for failure. */ | |
1210 | ||
1211 | #define target_remove_watchpoint(ADDR,LEN,TYPE) -1 | |
1212 | #define target_insert_watchpoint(ADDR,LEN,TYPE) -1 | |
1213 | ||
1214 | #endif /* TARGET_HAS_HARDWARE_WATCHPOINTS */ | |
1215 | ||
1216 | #ifndef target_insert_hw_breakpoint | |
1217 | #define target_remove_hw_breakpoint(ADDR,SHADOW) -1 | |
1218 | #define target_insert_hw_breakpoint(ADDR,SHADOW) -1 | |
1219 | #endif | |
1220 | ||
1221 | #ifndef target_stopped_data_address | |
1222 | #define target_stopped_data_address() 0 | |
1223 | #endif | |
1224 | ||
1225 | /* If defined, then we need to decr pc by this much after a hardware break- | |
1226 | point. Presumably this overrides DECR_PC_AFTER_BREAK... */ | |
1227 | ||
1228 | #ifndef DECR_PC_AFTER_HW_BREAK | |
1229 | #define DECR_PC_AFTER_HW_BREAK 0 | |
1230 | #endif | |
1231 | ||
1232 | /* Sometimes gdb may pick up what appears to be a valid target address | |
1233 | from a minimal symbol, but the value really means, essentially, | |
1234 | "This is an index into a table which is populated when the inferior | |
0d06e24b JM |
1235 | is run. Therefore, do not attempt to use this as a PC." */ |
1236 | ||
c906108c SS |
1237 | #if !defined(PC_REQUIRES_RUN_BEFORE_USE) |
1238 | #define PC_REQUIRES_RUN_BEFORE_USE(pc) (0) | |
1239 | #endif | |
1240 | ||
1241 | /* This will only be defined by a target that supports catching vfork events, | |
1242 | such as HP-UX. | |
1243 | ||
1244 | On some targets (such as HP-UX 10.20 and earlier), resuming a newly vforked | |
1245 | child process after it has exec'd, causes the parent process to resume as | |
1246 | well. To prevent the parent from running spontaneously, such targets should | |
0d06e24b | 1247 | define this to a function that prevents that from happening. */ |
c906108c SS |
1248 | #if !defined(ENSURE_VFORKING_PARENT_REMAINS_STOPPED) |
1249 | #define ENSURE_VFORKING_PARENT_REMAINS_STOPPED(PID) (0) | |
1250 | #endif | |
1251 | ||
1252 | /* This will only be defined by a target that supports catching vfork events, | |
1253 | such as HP-UX. | |
1254 | ||
1255 | On some targets (such as HP-UX 10.20 and earlier), a newly vforked child | |
1256 | process must be resumed when it delivers its exec event, before the parent | |
0d06e24b JM |
1257 | vfork event will be delivered to us. */ |
1258 | ||
c906108c SS |
1259 | #if !defined(RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK) |
1260 | #define RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK() (0) | |
1261 | #endif | |
1262 | ||
1263 | /* Routines for maintenance of the target structures... | |
1264 | ||
1265 | add_target: Add a target to the list of all possible targets. | |
1266 | ||
1267 | push_target: Make this target the top of the stack of currently used | |
c5aa993b JM |
1268 | targets, within its particular stratum of the stack. Result |
1269 | is 0 if now atop the stack, nonzero if not on top (maybe | |
1270 | should warn user). | |
c906108c SS |
1271 | |
1272 | unpush_target: Remove this from the stack of currently used targets, | |
c5aa993b JM |
1273 | no matter where it is on the list. Returns 0 if no |
1274 | change, 1 if removed from stack. | |
c906108c | 1275 | |
c5aa993b | 1276 | pop_target: Remove the top thing on the stack of current targets. */ |
c906108c | 1277 | |
a14ed312 | 1278 | extern void add_target (struct target_ops *); |
c906108c | 1279 | |
a14ed312 | 1280 | extern int push_target (struct target_ops *); |
c906108c | 1281 | |
a14ed312 | 1282 | extern int unpush_target (struct target_ops *); |
c906108c | 1283 | |
a14ed312 | 1284 | extern void target_preopen (int); |
c906108c | 1285 | |
a14ed312 | 1286 | extern void pop_target (void); |
c906108c SS |
1287 | |
1288 | /* Struct section_table maps address ranges to file sections. It is | |
1289 | mostly used with BFD files, but can be used without (e.g. for handling | |
1290 | raw disks, or files not in formats handled by BFD). */ | |
1291 | ||
c5aa993b JM |
1292 | struct section_table |
1293 | { | |
1294 | CORE_ADDR addr; /* Lowest address in section */ | |
1295 | CORE_ADDR endaddr; /* 1+highest address in section */ | |
c906108c | 1296 | |
c5aa993b | 1297 | sec_ptr the_bfd_section; |
c906108c | 1298 | |
c5aa993b JM |
1299 | bfd *bfd; /* BFD file pointer */ |
1300 | }; | |
c906108c SS |
1301 | |
1302 | /* Builds a section table, given args BFD, SECTABLE_PTR, SECEND_PTR. | |
1303 | Returns 0 if OK, 1 on error. */ | |
1304 | ||
1305 | extern int | |
a14ed312 | 1306 | build_section_table (bfd *, struct section_table **, struct section_table **); |
c906108c SS |
1307 | |
1308 | /* From mem-break.c */ | |
1309 | ||
a14ed312 | 1310 | extern int memory_remove_breakpoint (CORE_ADDR, char *); |
c906108c | 1311 | |
a14ed312 | 1312 | extern int memory_insert_breakpoint (CORE_ADDR, char *); |
c906108c | 1313 | |
a14ed312 | 1314 | extern int default_memory_remove_breakpoint (CORE_ADDR, char *); |
917317f4 | 1315 | |
a14ed312 | 1316 | extern int default_memory_insert_breakpoint (CORE_ADDR, char *); |
917317f4 | 1317 | |
c906108c | 1318 | extern breakpoint_from_pc_fn memory_breakpoint_from_pc; |
c906108c SS |
1319 | |
1320 | ||
1321 | /* From target.c */ | |
1322 | ||
a14ed312 | 1323 | extern void initialize_targets (void); |
c906108c | 1324 | |
a14ed312 | 1325 | extern void noprocess (void); |
c906108c | 1326 | |
a14ed312 | 1327 | extern void find_default_attach (char *, int); |
c906108c | 1328 | |
a14ed312 | 1329 | extern void find_default_require_attach (char *, int); |
c906108c | 1330 | |
a14ed312 | 1331 | extern void find_default_require_detach (int, char *, int); |
c906108c | 1332 | |
a14ed312 | 1333 | extern void find_default_create_inferior (char *, char *, char **); |
c906108c | 1334 | |
a14ed312 | 1335 | extern void find_default_clone_and_follow_inferior (int, int *); |
c906108c | 1336 | |
a14ed312 | 1337 | extern struct target_ops *find_run_target (void); |
7a292a7a | 1338 | |
a14ed312 | 1339 | extern struct target_ops *find_core_target (void); |
6426a772 | 1340 | |
a14ed312 | 1341 | extern struct target_ops *find_target_beneath (struct target_ops *); |
ed9a39eb JM |
1342 | |
1343 | extern int | |
a14ed312 | 1344 | target_resize_to_sections (struct target_ops *target, int num_added); |
07cd4b97 JB |
1345 | |
1346 | extern void remove_target_sections (bfd *abfd); | |
1347 | ||
c906108c SS |
1348 | \f |
1349 | /* Stuff that should be shared among the various remote targets. */ | |
1350 | ||
1351 | /* Debugging level. 0 is off, and non-zero values mean to print some debug | |
1352 | information (higher values, more information). */ | |
1353 | extern int remote_debug; | |
1354 | ||
1355 | /* Speed in bits per second, or -1 which means don't mess with the speed. */ | |
1356 | extern int baud_rate; | |
1357 | /* Timeout limit for response from target. */ | |
1358 | extern int remote_timeout; | |
1359 | ||
c906108c SS |
1360 | \f |
1361 | /* Functions for helping to write a native target. */ | |
1362 | ||
1363 | /* This is for native targets which use a unix/POSIX-style waitstatus. */ | |
a14ed312 | 1364 | extern void store_waitstatus (struct target_waitstatus *, int); |
c906108c | 1365 | |
c2d11a7d | 1366 | /* Predicate to target_signal_to_host(). Return non-zero if the enum |
0d06e24b | 1367 | targ_signal SIGNO has an equivalent ``host'' representation. */ |
c2d11a7d JM |
1368 | /* FIXME: cagney/1999-11-22: The name below was chosen in preference |
1369 | to the shorter target_signal_p() because it is far less ambigious. | |
1370 | In this context ``target_signal'' refers to GDB's internal | |
1371 | representation of the target's set of signals while ``host signal'' | |
0d06e24b JM |
1372 | refers to the target operating system's signal. Confused? */ |
1373 | ||
c2d11a7d JM |
1374 | extern int target_signal_to_host_p (enum target_signal signo); |
1375 | ||
1376 | /* Convert between host signal numbers and enum target_signal's. | |
1377 | target_signal_to_host() returns 0 and prints a warning() on GDB's | |
0d06e24b | 1378 | console if SIGNO has no equivalent host representation. */ |
c2d11a7d JM |
1379 | /* FIXME: cagney/1999-11-22: Here ``host'' is used incorrectly, it is |
1380 | refering to the target operating system's signal numbering. | |
1381 | Similarly, ``enum target_signal'' is named incorrectly, ``enum | |
1382 | gdb_signal'' would probably be better as it is refering to GDB's | |
0d06e24b JM |
1383 | internal representation of a target operating system's signal. */ |
1384 | ||
a14ed312 KB |
1385 | extern enum target_signal target_signal_from_host (int); |
1386 | extern int target_signal_to_host (enum target_signal); | |
c906108c SS |
1387 | |
1388 | /* Convert from a number used in a GDB command to an enum target_signal. */ | |
a14ed312 | 1389 | extern enum target_signal target_signal_from_command (int); |
c906108c SS |
1390 | |
1391 | /* Any target can call this to switch to remote protocol (in remote.c). */ | |
a14ed312 | 1392 | extern void push_remote_target (char *name, int from_tty); |
c906108c SS |
1393 | \f |
1394 | /* Imported from machine dependent code */ | |
1395 | ||
1396 | #ifndef SOFTWARE_SINGLE_STEP_P | |
1397 | #define SOFTWARE_SINGLE_STEP_P 0 | |
0d06e24b | 1398 | #define SOFTWARE_SINGLE_STEP(sig,bp_p) \ |
8e65ff28 | 1399 | (internal_error (__FILE__, __LINE__, "SOFTWARE_SINGLE_STEP"), 0) |
c906108c SS |
1400 | #endif /* SOFTWARE_SINGLE_STEP_P */ |
1401 | ||
1402 | /* Blank target vector entries are initialized to target_ignore. */ | |
a14ed312 | 1403 | void target_ignore (void); |
c906108c SS |
1404 | |
1405 | /* Macro for getting target's idea of a frame pointer. | |
1406 | FIXME: GDB's whole scheme for dealing with "frames" and | |
1407 | "frame pointers" needs a serious shakedown. */ | |
1408 | #ifndef TARGET_VIRTUAL_FRAME_POINTER | |
1409 | #define TARGET_VIRTUAL_FRAME_POINTER(ADDR, REGP, OFFP) \ | |
1410 | do { *(REGP) = FP_REGNUM; *(OFFP) = 0; } while (0) | |
1411 | #endif /* TARGET_VIRTUAL_FRAME_POINTER */ | |
1412 | ||
c5aa993b | 1413 | #endif /* !defined (TARGET_H) */ |