[deliverable/binutils-gdb.git] / gdb / testsuite / gdb.trace / entry-values.exp

# Copyright 2013-2015 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
load_lib dwarf.exp

# This test can only be run on targets which support DWARF-2 and use gas.
if {![dwarf2_support]} {
    return 0
}

standard_testfile .c entry-values-dw.S

if  {[gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile}1.o \
	  object {nodebug}] != ""} {
    return -1
}

# Start GDB and load object file, compute the offset of the
# instruction in bar returned from foo.  It is needed in the Dwarf
# Assembler.

gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}1.o

set returned_from_foo ""

if { [istarget "arm*-*-*"] || [istarget "aarch64*-*-*"] } {
    set call_insn "bl"
} elseif { [istarget "s390*-*-*"] } {
    set call_insn "brasl"
} elseif { [istarget "powerpc*-*-*"] } {
    set call_insn "bl"
} elseif { [istarget "mips*-*-*"] } {
    # Skip the delay slot after the instruction used to make a call
    # (which can be a jump or a branch) if it has one.
    #
    #  JUMP (or BRANCH) foo
    #  insn1
    #  insn2
    #
    # Most MIPS instructions used to make calls have a delay slot.
    # These include JAL, JALS, JALX, JALR, JALRS, BAL and BALS.
    # In this case the program continues from `insn2' when `foo'
    # returns.  The only exception is JALRC, in which case execution
    # resumes from `insn1' instead.
    set call_insn {jalrc|[jb]al[sxr]*[ \t][^\r\n]+\r\n}
} else {
    set call_insn "call"
}

# Calculate the offset of the instruction in bar returned from foo.
set test "disassemble bar"
gdb_test_multiple $test $test {
    -re ".*$hex <\\+$decimal>:\[ \t\]+$call_insn\[^\r\n\]+\r\n\[ \]+$hex <\\+($decimal)>:.*$gdb_prompt $" {
	set returned_from_foo $expect_out(1,string)
    }
    -re ".*$gdb_prompt $" {
	fail $test
    }
}

if { [string equal $returned_from_foo ""] } {
    fail "Find the call or branch instruction offset in bar"
    # The following test makes no sense if the offset is unknown.  We need
    # to update the pattern above to match call or branch instruction for
    # the target architecture.
    return -1
}

gdb_exit

# Make some DWARF for the test.
set asm_file [standard_output_file $srcfile2]
Dwarf::assemble $asm_file {
    declare_labels int_label foo_label
    global returned_from_foo
    global srcdir subdir srcfile

    set bar_result [function_range bar ${srcdir}/${subdir}/${srcfile}]
    set bar_start [lindex $bar_result 0]
    set bar_length [lindex $bar_result 1]

    cu {} {
	compile_unit {{language @DW_LANG_C}} {
	    int_label: base_type {
		{name int}
		{encoding @DW_ATE_signed}
		{byte_size 4 DW_FORM_sdata}
	    }

	    foo_label: subprogram {
		{decl_file 1 sdata}
		{MACRO_AT_func { foo ${srcdir}/${subdir}/${srcfile} }}
	    } {
		formal_parameter {
		    {type :$int_label}
		    {name i}
		    {location {DW_OP_reg0} SPECIAL_expr}
		}
		formal_parameter {
		    {type :$int_label}
		    {name j}
		    {location {DW_OP_reg1} SPECIAL_expr}
		}
	    }

	    subprogram {
		{name bar}
		{decl_file 1 sdata}
		{low_pc $bar_start addr}
		{high_pc "$bar_start + $bar_length" addr}
		{GNU_all_call_sites 1 sdata}
	    } {
		formal_parameter {
		    {type :$int_label}
		    {name i}
		}

		GNU_call_site {
		    {low_pc "$bar_start + $returned_from_foo" addr}
		    {abstract_origin :$foo_label}
		} {
		    # Faked entry values are reference to variables 'global1'
		    # and 'global2' and faked locations are register 0 and
		    # register 1.
		    GNU_call_site_parameter {
			{location {DW_OP_reg0} SPECIAL_expr}
			{GNU_call_site_value {
			    addr global1
			    deref_size 4
			} SPECIAL_expr}
		    }
		    GNU_call_site_parameter {
			{location {DW_OP_reg1} SPECIAL_expr}
			{GNU_call_site_value {
			    addr global2
			    deref_size 4
			} SPECIAL_expr}
		    }
		}
	    }
	}
    }
}

if  {[gdb_compile $asm_file ${binfile}2.o object {nodebug}] != ""} {
    return -1
}

if  {[gdb_compile [list ${binfile}1.o ${binfile}2.o] \
	  "${binfile}" executable {}] != ""} {
    return -1
}

clean_restart ${testfile}

if ![runto_main] {
    fail "Can't run to main"
    return -1
}

gdb_breakpoint "foo"

gdb_continue_to_breakpoint "foo"

gdb_test_no_output "set print entry-values both"

gdb_test_sequence "bt" "bt (1)" {
    "\[\r\n\]#0 .* foo \\(i=[-]?[0-9]+, i@entry=2, j=[-]?[0-9]+, j@entry=3\\)"
    "\[\r\n\]#1 .* bar \\(i=<optimized out>, i@entry=<optimized out>\\)"
    "\[\r\n\]#2 .* main \\(\\)"
}

# Update global variables 'global1' and 'global2' and test that the
# entry values are updated too.

gdb_test_no_output "set var global1=10"
gdb_test_no_output "set var global2=11"

gdb_test_sequence "bt" "bt (2)" {
    "\[\r\n\]#0 .* foo \\(i=[-]?[0-9]+, i@entry=10, j=[-]?[0-9]+, j@entry=11\\)"
    "\[\r\n\]#1 .* bar \\(i=<optimized out>, i@entry=<optimized out>\\)"
    "\[\r\n\]#2 .* main \\(\\)"
}

# Restart GDB and trace.

clean_restart $binfile

load_lib "trace-support.exp"

if ![runto_main] {
    fail "Can't run to main to check for trace support"
    return -1
}

if ![gdb_target_supports_trace] {
    unsupported "target does not support trace"
    return -1
}

gdb_test "trace foo" "Tracepoint $decimal at .*"

# Collect arguments i and j.  Collect 'global1' which is entry value
# of argument i.  Don't collect 'global2' to test the entry value of
# argument j.

gdb_trace_setactions "set action for tracepoint 1" "" \
    "collect i, j, global1, \(\*\(void \*\*\) \(\$$spreg\)\) @ 64" "^$"

gdb_test_no_output "tstart"

gdb_breakpoint "end"
gdb_continue_to_breakpoint "end"

gdb_test_no_output "tstop"

gdb_test "tfind" "Found trace frame 0, .*" "tfind start"

# Since 'global2' is not collected, j@entry is expected to be 'unavailable'.
gdb_test "bt 1" "#0 .* foo \\(i=\[-\]?$decimal, i@entry=2, j=\[-\]?$decimal, j@entry=<unavailable>\\).*"

# Test that unavailable "j@entry" is not shown when command option
# --skip-unavailable is used.
gdb_test "interpreter-exec mi \"-stack-list-arguments --skip-unavailable --simple-values\"" \
    "\r\n\\^done,stack-args=\\\[frame={level=\"0\",args=\\\[{name=\"i\",type=\"int\",value=\".*\"},{name=\"i@entry\",type=\"int\",value=\"2\"},{name=\"j\",type=\"int\",value=\".*\"}\\\]},frame=.*\\\].*"

gdb_test "tfind" "Target failed to find requested trace frame\..*"
Commit	Line	Data
32d0add0	1	# Copyright 2013-2015 Free Software Foundation, Inc.
b39a8faf YQ	2
	3	# This program is free software; you can redistribute it and/or modify
	4	# it under the terms of the GNU General Public License as published by
	5	# the Free Software Foundation; either version 3 of the License, or
	6	# (at your option) any later version.
	7	#
	8	# This program is distributed in the hope that it will be useful,
	9	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	10	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	11	# GNU General Public License for more details.
	12	#
	13	# You should have received a copy of the GNU General Public License
	14	# along with this program. If not, see <http://www.gnu.org/licenses/>.
	15	load_lib dwarf.exp
	16
	17	# This test can only be run on targets which support DWARF-2 and use gas.
	18	if {![dwarf2_support]} {
	19	return 0
	20	}
	21
	22	standard_testfile .c entry-values-dw.S
	23
	24	if {[gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile}1.o \
	25	object {nodebug}] != ""} {
	26	return -1
	27	}
	28
9d85a0ec YQ	29	# Start GDB and load object file, compute the offset of the
	30	# instruction in bar returned from foo. It is needed in the Dwarf
	31	# Assembler.
b39a8faf YQ	32
	33	gdb_exit
	34	gdb_start
	35	gdb_reinitialize_dir $srcdir/$subdir
	36	gdb_load ${binfile}1.o
	37
9d85a0ec	38	set returned_from_foo ""
b39a8faf	39
3f983d47 YZ	40	if { [istarget "arm--"] \|\| [istarget "aarch64--"] } {
3f983d47 YZ	41	set call_insn "bl"
d674a709 AA	42	} elseif { [istarget "s390--*"] } {
d674a709 AA	43	set call_insn "brasl"
2b239efb LM	44	} elseif { [istarget "powerpc--*"] } {
2b239efb LM	45	set call_insn "bl"
acc018ac YQ	46	} elseif { [istarget "mips--*"] } {
	47	# Skip the delay slot after the instruction used to make a call
	48	# (which can be a jump or a branch) if it has one.
	49	#
	50	# JUMP (or BRANCH) foo
	51	# insn1
	52	# insn2
	53	#
	54	# Most MIPS instructions used to make calls have a delay slot.
	55	# These include JAL, JALS, JALX, JALR, JALRS, BAL and BALS.
	56	# In this case the program continues from `insn2' when `foo'
	57	# returns. The only exception is JALRC, in which case execution
	58	# resumes from `insn1' instead.
	59	set call_insn {jalrc\|[jb]al[sxr]*[ \t][^\r\n]+\r\n}
3f983d47 YZ	60	} else {
	61	set call_insn "call"
	62	}
	63
9d85a0ec	64	# Calculate the offset of the instruction in bar returned from foo.
b39a8faf YQ	65	set test "disassemble bar"
b39a8faf YQ	66	gdb_test_multiple $test $test {
84429e27	67	-re ".$hex <\\+$decimal>:\[ \t\]+$call_insn\[^\r\n\]+\r\n\[ \]+$hex <\\+($decimal)>:.$gdb_prompt $" {
9d85a0ec	68	set returned_from_foo $expect_out(1,string)
b39a8faf YQ	69	}
	70	-re ".*$gdb_prompt $" {
	71	fail $test
	72	}
	73	}
	74
9d85a0ec	75	if { [string equal $returned_from_foo ""] } {
b39a8faf YQ	76	fail "Find the call or branch instruction offset in bar"
	77	# The following test makes no sense if the offset is unknown. We need
	78	# to update the pattern above to match call or branch instruction for
	79	# the target architecture.
	80	return -1
	81	}
	82
b39a8faf YQ	83	gdb_exit
	84
	85	# Make some DWARF for the test.
	86	set asm_file [standard_output_file $srcfile2]
	87	Dwarf::assemble $asm_file {
	88	declare_labels int_label foo_label
9d85a0ec	89	global returned_from_foo
84429e27 YQ	90	global srcdir subdir srcfile
	91
	92	set bar_result [function_range bar ${srcdir}/${subdir}/${srcfile}]
	93	set bar_start [lindex $bar_result 0]
	94	set bar_length [lindex $bar_result 1]
b39a8faf YQ	95
	96	cu {} {
	97	compile_unit {{language @DW_LANG_C}} {
	98	int_label: base_type {
	99	{name int}
	100	{encoding @DW_ATE_signed}
	101	{byte_size 4 DW_FORM_sdata}
	102	}
	103
	104	foo_label: subprogram {
f2e0d4b4	105	{decl_file 1 sdata}
84429e27	106	{MACRO_AT_func { foo ${srcdir}/${subdir}/${srcfile} }}
b39a8faf YQ	107	} {
	108	formal_parameter {
	109	{type :$int_label}
	110	{name i}
	111	{location {DW_OP_reg0} SPECIAL_expr}
	112	}
	113	formal_parameter {
	114	{type :$int_label}
	115	{name j}
	116	{location {DW_OP_reg1} SPECIAL_expr}
	117	}
	118	}
	119
	120	subprogram {
	121	{name bar}
f2e0d4b4	122	{decl_file 1 sdata}
84429e27 YQ	123	{low_pc $bar_start addr}
84429e27 YQ	124	{high_pc "$bar_start + $bar_length" addr}
f2e0d4b4	125	{GNU_all_call_sites 1 sdata}
b39a8faf YQ	126	} {
	127	formal_parameter {
	128	{type :$int_label}
	129	{name i}
	130	}
	131
	132	GNU_call_site {
9d85a0ec	133	{low_pc "$bar_start + $returned_from_foo" addr}
b39a8faf YQ	134	{abstract_origin :$foo_label}
	135	} {
	136	# Faked entry values are reference to variables 'global1'
	137	# and 'global2' and faked locations are register 0 and
	138	# register 1.
	139	GNU_call_site_parameter {
	140	{location {DW_OP_reg0} SPECIAL_expr}
	141	{GNU_call_site_value {
	142	addr global1
	143	deref_size 4
	144	} SPECIAL_expr}
	145	}
	146	GNU_call_site_parameter {
	147	{location {DW_OP_reg1} SPECIAL_expr}
	148	{GNU_call_site_value {
	149	addr global2
	150	deref_size 4
	151	} SPECIAL_expr}
	152	}
	153	}
	154	}
	155	}
	156	}
	157	}
	158
	159	if {[gdb_compile $asm_file ${binfile}2.o object {nodebug}] != ""} {
	160	return -1
	161	}
	162
	163	if {[gdb_compile [list ${binfile}1.o ${binfile}2.o] \
	164	"${binfile}" executable {}] != ""} {
	165	return -1
	166	}
	167
	168	clean_restart ${testfile}
	169
	170	if ![runto_main] {
	171	fail "Can't run to main"
	172	return -1
	173	}
	174
	175	gdb_breakpoint "foo"
	176
	177	gdb_continue_to_breakpoint "foo"
	178
	179	gdb_test_no_output "set print entry-values both"
	180
	181	gdb_test_sequence "bt" "bt (1)" {
	182	"\[\r\n\]#0 .* foo \\(i=[-]?[0-9]+, i@entry=2, j=[-]?[0-9]+, j@entry=3\\)"
	183	"\[\r\n\]#1 .* bar \\(i=<optimized out>, i@entry=<optimized out>\\)"
	184	"\[\r\n\]#2 .* main \\(\\)"
	185	}
	186
	187	# Update global variables 'global1' and 'global2' and test that the
	188	# entry values are updated too.
	189
	190	gdb_test_no_output "set var global1=10"
	191	gdb_test_no_output "set var global2=11"
	192
	193	gdb_test_sequence "bt" "bt (2)" {
	194	"\[\r\n\]#0 .* foo \\(i=[-]?[0-9]+, i@entry=10, j=[-]?[0-9]+, j@entry=11\\)"
	195	"\[\r\n\]#1 .* bar \\(i=<optimized out>, i@entry=<optimized out>\\)"
	196	"\[\r\n\]#2 .* main \\(\\)"
	197	}
b1224238 YQ	198
	199	# Restart GDB and trace.
	200
	201	clean_restart $binfile
	202
	203	load_lib "trace-support.exp"
	204
	205	if ![runto_main] {
	206	fail "Can't run to main to check for trace support"
	207	return -1
	208	}
	209
	210	if ![gdb_target_supports_trace] {
	211	unsupported "target does not support trace"
	212	return -1
	213	}
	214
	215	gdb_test "trace foo" "Tracepoint $decimal at .*"
	216
b1224238 YQ	217	# Collect arguments i and j. Collect 'global1' which is entry value
	218	# of argument i. Don't collect 'global2' to test the entry value of
	219	# argument j.
	220
	221	gdb_trace_setactions "set action for tracepoint 1" "" \
6e7675a7	222	"collect i, j, global1, \(\\(void \\*\) \(\$$spreg\)\) @ 64" "^$"
b1224238 YQ	223
	224	gdb_test_no_output "tstart"
	225
	226	gdb_breakpoint "end"
	227	gdb_continue_to_breakpoint "end"
	228
	229	gdb_test_no_output "tstop"
	230
	231	gdb_test "tfind" "Found trace frame 0, .*" "tfind start"
	232
	233	# Since 'global2' is not collected, j@entry is expected to be 'unavailable'.
	234	gdb_test "bt 1" "#0 .* foo \\(i=\[-\]?$decimal, i@entry=2, j=\[-\]?$decimal, j@entry=<unavailable>\\).*"
	235
6211c335 YQ	236	# Test that unavailable "j@entry" is not shown when command option
	237	# --skip-unavailable is used.
	238	gdb_test "interpreter-exec mi \"-stack-list-arguments --skip-unavailable --simple-values\"" \
	239	"\r\n\\^done,stack-args=\\\[frame={level=\"0\",args=\\\[{name=\"i\",type=\"int\",value=\".\"},{name=\"i@entry\",type=\"int\",value=\"2\"},{name=\"j\",type=\"int\",value=\".\"}\\\]},frame=.\\\]."
	240
b1224238	241	gdb_test "tfind" "Target failed to find requested trace frame\..*"