Commit | Line | Data |
---|---|---|
e2882c85 | 1 | # Copyright 1992-2018 Free Software Foundation, Inc. |
c906108c SS |
2 | |
3 | # This program is free software; you can redistribute it and/or modify | |
4 | # it under the terms of the GNU General Public License as published by | |
e22f8b7c | 5 | # the Free Software Foundation; either version 3 of the License, or |
c906108c | 6 | # (at your option) any later version. |
e22f8b7c | 7 | # |
c906108c SS |
8 | # This program is distributed in the hope that it will be useful, |
9 | # but WITHOUT ANY WARRANTY; without even the implied warranty of | |
10 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
11 | # GNU General Public License for more details. | |
e22f8b7c | 12 | # |
c906108c | 13 | # You should have received a copy of the GNU General Public License |
e22f8b7c | 14 | # along with this program. If not, see <http://www.gnu.org/licenses/>. |
c906108c | 15 | |
c906108c SS |
16 | # This file was written by Fred Fish. (fnf@cygnus.com) |
17 | ||
18 | # Generic gdb subroutines that should work for any target. If these | |
19 | # need to be modified for any target, it can be done with a variable | |
20 | # or by passing arguments. | |
21 | ||
97c3f1f3 JK |
22 | if {$tool == ""} { |
23 | # Tests would fail, logs on get_compiler_info() would be missing. | |
24 | send_error "`site.exp' not found, run `make site.exp'!\n" | |
25 | exit 2 | |
26 | } | |
27 | ||
c906108c | 28 | load_lib libgloss.exp |
17e1c970 | 29 | load_lib cache.exp |
a25eb028 | 30 | load_lib gdb-utils.exp |
e309aa65 | 31 | load_lib memory.exp |
c906108c SS |
32 | |
33 | global GDB | |
c906108c | 34 | |
f71c18e7 PA |
35 | # The spawn ID used for I/O interaction with the inferior. For native |
36 | # targets, or remote targets that can do I/O through GDB | |
37 | # (semi-hosting) this will be the same as the host/GDB's spawn ID. | |
38 | # Otherwise, the board may set this to some other spawn ID. E.g., | |
39 | # when debugging with GDBserver, this is set to GDBserver's spawn ID, | |
40 | # so input/output is done on gdbserver's tty. | |
41 | global inferior_spawn_id | |
42 | ||
c906108c | 43 | if [info exists TOOL_EXECUTABLE] { |
4ec70201 | 44 | set GDB $TOOL_EXECUTABLE |
c906108c SS |
45 | } |
46 | if ![info exists GDB] { | |
47 | if ![is_remote host] { | |
48 | set GDB [findfile $base_dir/../../gdb/gdb "$base_dir/../../gdb/gdb" [transform gdb]] | |
49 | } else { | |
4ec70201 | 50 | set GDB [transform gdb] |
c906108c SS |
51 | } |
52 | } | |
53 | verbose "using GDB = $GDB" 2 | |
54 | ||
6b8ce727 DE |
55 | # GDBFLAGS is available for the user to set on the command line. |
56 | # E.g. make check RUNTESTFLAGS=GDBFLAGS=mumble | |
57 | # Testcases may use it to add additional flags, but they must: | |
58 | # - append new flags, not overwrite | |
59 | # - restore the original value when done | |
c906108c SS |
60 | global GDBFLAGS |
61 | if ![info exists GDBFLAGS] { | |
6b8ce727 | 62 | set GDBFLAGS "" |
c906108c SS |
63 | } |
64 | verbose "using GDBFLAGS = $GDBFLAGS" 2 | |
65 | ||
2f4e0a80 DE |
66 | # Make the build data directory available to tests. |
67 | set BUILD_DATA_DIRECTORY "[pwd]/../data-directory" | |
68 | ||
6b8ce727 | 69 | # INTERNAL_GDBFLAGS contains flags that the testsuite requires. |
1be00882 DE |
70 | global INTERNAL_GDBFLAGS |
71 | if ![info exists INTERNAL_GDBFLAGS] { | |
2f4e0a80 | 72 | set INTERNAL_GDBFLAGS "-nw -nx -data-directory $BUILD_DATA_DIRECTORY" |
1be00882 | 73 | } |
6b8ce727 | 74 | |
9e0b60a8 | 75 | # The variable gdb_prompt is a regexp which matches the gdb prompt. |
3714cea7 DE |
76 | # Set it if it is not already set. This is also set by default_gdb_init |
77 | # but it's not clear what removing one of them will break. | |
78 | # See with_gdb_prompt for more details on prompt handling. | |
c906108c | 79 | global gdb_prompt |
9e0b60a8 | 80 | if ![info exists gdb_prompt] then { |
3714cea7 | 81 | set gdb_prompt "\\(gdb\\)" |
c906108c SS |
82 | } |
83 | ||
94696ad3 | 84 | # A regexp that matches the pagination prompt. |
eb6af809 TT |
85 | set pagination_prompt \ |
86 | "--Type <RET> for more, q to quit, c to continue without paging--" | |
94696ad3 | 87 | |
6006a3a1 BR |
88 | # The variable fullname_syntax_POSIX is a regexp which matches a POSIX |
89 | # absolute path ie. /foo/ | |
d0b76dc6 | 90 | set fullname_syntax_POSIX {/[^\n]*/} |
6006a3a1 BR |
91 | # The variable fullname_syntax_UNC is a regexp which matches a Windows |
92 | # UNC path ie. \\D\foo\ | |
d0b76dc6 | 93 | set fullname_syntax_UNC {\\\\[^\\]+\\[^\n]+\\} |
6006a3a1 BR |
94 | # The variable fullname_syntax_DOS_CASE is a regexp which matches a |
95 | # particular DOS case that GDB most likely will output | |
96 | # ie. \foo\, but don't match \\.*\ | |
d0b76dc6 | 97 | set fullname_syntax_DOS_CASE {\\[^\\][^\n]*\\} |
6006a3a1 BR |
98 | # The variable fullname_syntax_DOS is a regexp which matches a DOS path |
99 | # ie. a:\foo\ && a:foo\ | |
d0b76dc6 | 100 | set fullname_syntax_DOS {[a-zA-Z]:[^\n]*\\} |
6006a3a1 BR |
101 | # The variable fullname_syntax is a regexp which matches what GDB considers |
102 | # an absolute path. It is currently debatable if the Windows style paths | |
103 | # d:foo and \abc should be considered valid as an absolute path. | |
104 | # Also, the purpse of this regexp is not to recognize a well formed | |
105 | # absolute path, but to say with certainty that a path is absolute. | |
106 | set fullname_syntax "($fullname_syntax_POSIX|$fullname_syntax_UNC|$fullname_syntax_DOS_CASE|$fullname_syntax_DOS)" | |
107 | ||
93076499 ND |
108 | # Needed for some tests under Cygwin. |
109 | global EXEEXT | |
110 | global env | |
111 | ||
112 | if ![info exists env(EXEEXT)] { | |
113 | set EXEEXT "" | |
114 | } else { | |
115 | set EXEEXT $env(EXEEXT) | |
116 | } | |
117 | ||
bb2bed55 NR |
118 | set octal "\[0-7\]+" |
119 | ||
eceb0c5f | 120 | set inferior_exited_re "(\\\[Inferior \[0-9\]+ \\(.*\\) exited)" |
fda326dd | 121 | |
fad0c9fb PA |
122 | # A regular expression that matches a value history number. |
123 | # E.g., $1, $2, etc. | |
124 | set valnum_re "\\\$$decimal" | |
125 | ||
085dd6e6 JM |
126 | ### Only procedures should come after this point. |
127 | ||
c906108c SS |
128 | # |
129 | # gdb_version -- extract and print the version number of GDB | |
130 | # | |
131 | proc default_gdb_version {} { | |
132 | global GDB | |
6b8ce727 | 133 | global INTERNAL_GDBFLAGS GDBFLAGS |
c906108c | 134 | global gdb_prompt |
5e92f71a TT |
135 | global inotify_pid |
136 | ||
137 | if {[info exists inotify_pid]} { | |
138 | eval exec kill $inotify_pid | |
139 | } | |
140 | ||
fa335448 | 141 | set output [remote_exec host "$GDB $INTERNAL_GDBFLAGS --version"] |
4ec70201 | 142 | set tmp [lindex $output 1] |
c906108c SS |
143 | set version "" |
144 | regexp " \[0-9\]\[^ \t\n\r\]+" "$tmp" version | |
145 | if ![is_remote host] { | |
6b8ce727 | 146 | clone_output "[which $GDB] version $version $INTERNAL_GDBFLAGS $GDBFLAGS\n" |
c906108c | 147 | } else { |
6b8ce727 | 148 | clone_output "$GDB on remote host version $version $INTERNAL_GDBFLAGS $GDBFLAGS\n" |
c906108c SS |
149 | } |
150 | } | |
151 | ||
152 | proc gdb_version { } { | |
ae59b1da | 153 | return [default_gdb_version] |
c906108c SS |
154 | } |
155 | ||
156 | # | |
157 | # gdb_unload -- unload a file if one is loaded | |
608e2dbb | 158 | # Return 0 on success, -1 on error. |
c906108c SS |
159 | # |
160 | ||
161 | proc gdb_unload {} { | |
162 | global verbose | |
163 | global GDB | |
164 | global gdb_prompt | |
165 | send_gdb "file\n" | |
166 | gdb_expect 60 { | |
167 | -re "No executable file now\[^\r\n\]*\[\r\n\]" { exp_continue } | |
168 | -re "No symbol file now\[^\r\n\]*\[\r\n\]" { exp_continue } | |
959e7469 PM |
169 | -re "A program is being debugged already.*Are you sure you want to change the file.*y or n. $" { |
170 | send_gdb "y\n" | |
c906108c SS |
171 | exp_continue |
172 | } | |
173 | -re "Discard symbol table from .*y or n.*$" { | |
174 | send_gdb "y\n" | |
175 | exp_continue | |
176 | } | |
177 | -re "$gdb_prompt $" {} | |
178 | timeout { | |
975531db | 179 | perror "couldn't unload file in $GDB (timeout)." |
c906108c SS |
180 | return -1 |
181 | } | |
182 | } | |
608e2dbb | 183 | return 0 |
c906108c SS |
184 | } |
185 | ||
186 | # Many of the tests depend on setting breakpoints at various places and | |
187 | # running until that breakpoint is reached. At times, we want to start | |
188 | # with a clean-slate with respect to breakpoints, so this utility proc | |
189 | # lets us do this without duplicating this code everywhere. | |
190 | # | |
191 | ||
192 | proc delete_breakpoints {} { | |
193 | global gdb_prompt | |
194 | ||
a0b3c4fd JM |
195 | # we need a larger timeout value here or this thing just confuses |
196 | # itself. May need a better implementation if possible. - guo | |
197 | # | |
d8b901ed PA |
198 | set timeout 100 |
199 | ||
200 | set msg "delete all breakpoints in delete_breakpoints" | |
201 | set deleted 0 | |
202 | gdb_test_multiple "delete breakpoints" "$msg" { | |
203 | -re "Delete all breakpoints.*y or n.*$" { | |
4ec70201 | 204 | send_gdb "y\n" |
c906108c SS |
205 | exp_continue |
206 | } | |
d8b901ed PA |
207 | -re "$gdb_prompt $" { |
208 | set deleted 1 | |
209 | } | |
c906108c | 210 | } |
d8b901ed PA |
211 | |
212 | if {$deleted} { | |
213 | # Confirm with "info breakpoints". | |
214 | set deleted 0 | |
215 | set msg "info breakpoints" | |
216 | gdb_test_multiple $msg $msg { | |
217 | -re "No breakpoints or watchpoints..*$gdb_prompt $" { | |
218 | set deleted 1 | |
219 | } | |
220 | -re "$gdb_prompt $" { | |
221 | } | |
c906108c | 222 | } |
d8b901ed PA |
223 | } |
224 | ||
225 | if {!$deleted} { | |
226 | perror "breakpoints not deleted" | |
c906108c SS |
227 | } |
228 | } | |
229 | ||
300b6685 PA |
230 | # Returns true iff the target supports using the "run" command. |
231 | ||
232 | proc target_can_use_run_cmd {} { | |
233 | if [target_info exists use_gdb_stub] { | |
234 | # In this case, when we connect, the inferior is already | |
235 | # running. | |
236 | return 0 | |
237 | } | |
238 | ||
239 | # Assume yes. | |
240 | return 1 | |
241 | } | |
242 | ||
c906108c SS |
243 | # Generic run command. |
244 | # | |
245 | # The second pattern below matches up to the first newline *only*. | |
246 | # Using ``.*$'' could swallow up output that we attempt to match | |
247 | # elsewhere. | |
248 | # | |
1d41d75c DE |
249 | # N.B. This function does not wait for gdb to return to the prompt, |
250 | # that is the caller's responsibility. | |
251 | ||
c906108c | 252 | proc gdb_run_cmd {args} { |
e11ac3a3 | 253 | global gdb_prompt use_gdb_stub |
c906108c | 254 | |
a25eb028 MR |
255 | foreach command [gdb_init_commands] { |
256 | send_gdb "$command\n" | |
c906108c SS |
257 | gdb_expect 30 { |
258 | -re "$gdb_prompt $" { } | |
259 | default { | |
4ec70201 PA |
260 | perror "gdb_init_command for target failed" |
261 | return | |
c906108c SS |
262 | } |
263 | } | |
264 | } | |
265 | ||
e11ac3a3 | 266 | if $use_gdb_stub { |
c906108c | 267 | if [target_info exists gdb,do_reload_on_run] { |
b741e217 | 268 | if { [gdb_reload] != 0 } { |
4ec70201 | 269 | return |
917317f4 | 270 | } |
4ec70201 | 271 | send_gdb "continue\n" |
c906108c SS |
272 | gdb_expect 60 { |
273 | -re "Continu\[^\r\n\]*\[\r\n\]" {} | |
274 | default {} | |
275 | } | |
4ec70201 | 276 | return |
c906108c SS |
277 | } |
278 | ||
279 | if [target_info exists gdb,start_symbol] { | |
4ec70201 | 280 | set start [target_info gdb,start_symbol] |
c906108c | 281 | } else { |
4ec70201 | 282 | set start "start" |
c906108c SS |
283 | } |
284 | send_gdb "jump *$start\n" | |
4ec70201 | 285 | set start_attempt 1 |
917317f4 JM |
286 | while { $start_attempt } { |
287 | # Cap (re)start attempts at three to ensure that this loop | |
288 | # always eventually fails. Don't worry about trying to be | |
289 | # clever and not send a command when it has failed. | |
290 | if [expr $start_attempt > 3] { | |
4ec70201 PA |
291 | perror "Jump to start() failed (retry count exceeded)" |
292 | return | |
c906108c | 293 | } |
4ec70201 | 294 | set start_attempt [expr $start_attempt + 1] |
917317f4 JM |
295 | gdb_expect 30 { |
296 | -re "Continuing at \[^\r\n\]*\[\r\n\]" { | |
4ec70201 | 297 | set start_attempt 0 |
917317f4 JM |
298 | } |
299 | -re "No symbol \"_start\" in current.*$gdb_prompt $" { | |
4ec70201 PA |
300 | perror "Can't find start symbol to run in gdb_run" |
301 | return | |
917317f4 JM |
302 | } |
303 | -re "No symbol \"start\" in current.*$gdb_prompt $" { | |
4ec70201 | 304 | send_gdb "jump *_start\n" |
917317f4 JM |
305 | } |
306 | -re "No symbol.*context.*$gdb_prompt $" { | |
4ec70201 | 307 | set start_attempt 0 |
917317f4 JM |
308 | } |
309 | -re "Line.* Jump anyway.*y or n. $" { | |
310 | send_gdb "y\n" | |
311 | } | |
312 | -re "The program is not being run.*$gdb_prompt $" { | |
b741e217 | 313 | if { [gdb_reload] != 0 } { |
4ec70201 | 314 | return |
917317f4 | 315 | } |
4ec70201 | 316 | send_gdb "jump *$start\n" |
917317f4 JM |
317 | } |
318 | timeout { | |
4ec70201 | 319 | perror "Jump to start() failed (timeout)" |
917317f4 JM |
320 | return |
321 | } | |
c906108c | 322 | } |
c906108c | 323 | } |
c906108c SS |
324 | return |
325 | } | |
83f66e8f DJ |
326 | |
327 | if [target_info exists gdb,do_reload_on_run] { | |
b741e217 | 328 | if { [gdb_reload] != 0 } { |
4ec70201 | 329 | return |
83f66e8f DJ |
330 | } |
331 | } | |
c906108c SS |
332 | send_gdb "run $args\n" |
333 | # This doesn't work quite right yet. | |
5aa7ddc2 PM |
334 | # Use -notransfer here so that test cases (like chng-sym.exp) |
335 | # may test for additional start-up messages. | |
336 | gdb_expect 60 { | |
c906108c SS |
337 | -re "The program .* has been started already.*y or n. $" { |
338 | send_gdb "y\n" | |
339 | exp_continue | |
340 | } | |
bbb88ebf | 341 | -notransfer -re "Starting program: \[^\r\n\]*" {} |
8e46892c JK |
342 | -notransfer -re "$gdb_prompt $" { |
343 | # There is no more input expected. | |
344 | } | |
c906108c SS |
345 | } |
346 | } | |
347 | ||
b741e217 DJ |
348 | # Generic start command. Return 0 if we could start the program, -1 |
349 | # if we could not. | |
1d41d75c DE |
350 | # |
351 | # N.B. This function does not wait for gdb to return to the prompt, | |
352 | # that is the caller's responsibility. | |
b741e217 DJ |
353 | |
354 | proc gdb_start_cmd {args} { | |
e11ac3a3 | 355 | global gdb_prompt use_gdb_stub |
b741e217 | 356 | |
a25eb028 MR |
357 | foreach command [gdb_init_commands] { |
358 | send_gdb "$command\n" | |
b741e217 DJ |
359 | gdb_expect 30 { |
360 | -re "$gdb_prompt $" { } | |
361 | default { | |
4ec70201 | 362 | perror "gdb_init_command for target failed" |
ae59b1da | 363 | return -1 |
b741e217 DJ |
364 | } |
365 | } | |
366 | } | |
367 | ||
e11ac3a3 | 368 | if $use_gdb_stub { |
b741e217 DJ |
369 | return -1 |
370 | } | |
371 | ||
372 | send_gdb "start $args\n" | |
2de75e71 JB |
373 | # Use -notransfer here so that test cases (like chng-sym.exp) |
374 | # may test for additional start-up messages. | |
b741e217 DJ |
375 | gdb_expect 60 { |
376 | -re "The program .* has been started already.*y or n. $" { | |
377 | send_gdb "y\n" | |
378 | exp_continue | |
379 | } | |
b741e217 DJ |
380 | -notransfer -re "Starting program: \[^\r\n\]*" { |
381 | return 0 | |
382 | } | |
383 | } | |
384 | return -1 | |
385 | } | |
386 | ||
4e5a4f58 JB |
387 | # Generic starti command. Return 0 if we could start the program, -1 |
388 | # if we could not. | |
389 | # | |
390 | # N.B. This function does not wait for gdb to return to the prompt, | |
391 | # that is the caller's responsibility. | |
392 | ||
393 | proc gdb_starti_cmd {args} { | |
394 | global gdb_prompt use_gdb_stub | |
395 | ||
396 | foreach command [gdb_init_commands] { | |
397 | send_gdb "$command\n" | |
398 | gdb_expect 30 { | |
399 | -re "$gdb_prompt $" { } | |
400 | default { | |
401 | perror "gdb_init_command for target failed" | |
402 | return -1 | |
403 | } | |
404 | } | |
405 | } | |
406 | ||
407 | if $use_gdb_stub { | |
408 | return -1 | |
409 | } | |
410 | ||
411 | send_gdb "starti $args\n" | |
412 | gdb_expect 60 { | |
413 | -re "The program .* has been started already.*y or n. $" { | |
414 | send_gdb "y\n" | |
415 | exp_continue | |
416 | } | |
417 | -re "Starting program: \[^\r\n\]*" { | |
418 | return 0 | |
419 | } | |
420 | } | |
421 | return -1 | |
422 | } | |
423 | ||
78a1a894 | 424 | # Set a breakpoint at FUNCTION. If there is an additional argument it is |
55cd6f92 | 425 | # a list of options; the supported options are allow-pending, temporary, |
a20714ff | 426 | # message, no-message, passfail and qualified. |
5b7d0050 DE |
427 | # The result is 1 for success, 0 for failure. |
428 | # | |
429 | # Note: The handling of message vs no-message is messed up, but it's based | |
430 | # on historical usage. By default this function does not print passes, | |
431 | # only fails. | |
432 | # no-message: turns off printing of fails (and passes, but they're already off) | |
433 | # message: turns on printing of passes (and fails, but they're already on) | |
78a1a894 DJ |
434 | |
435 | proc gdb_breakpoint { function args } { | |
c906108c SS |
436 | global gdb_prompt |
437 | global decimal | |
438 | ||
78a1a894 | 439 | set pending_response n |
5b7d0050 | 440 | if {[lsearch -exact $args allow-pending] != -1} { |
78a1a894 DJ |
441 | set pending_response y |
442 | } | |
443 | ||
e48883f7 | 444 | set break_command "break" |
18ac113b | 445 | set break_message "Breakpoint" |
5b7d0050 | 446 | if {[lsearch -exact $args temporary] != -1} { |
e48883f7 | 447 | set break_command "tbreak" |
18ac113b | 448 | set break_message "Temporary breakpoint" |
e48883f7 DJ |
449 | } |
450 | ||
a20714ff PA |
451 | if {[lsearch -exact $args qualified] != -1} { |
452 | append break_command " -qualified" | |
453 | } | |
454 | ||
5b7d0050 DE |
455 | set print_pass 0 |
456 | set print_fail 1 | |
457 | set no_message_loc [lsearch -exact $args no-message] | |
458 | set message_loc [lsearch -exact $args message] | |
459 | # The last one to appear in args wins. | |
460 | if { $no_message_loc > $message_loc } { | |
461 | set print_fail 0 | |
462 | } elseif { $message_loc > $no_message_loc } { | |
463 | set print_pass 1 | |
55cd6f92 DJ |
464 | } |
465 | ||
5b7d0050 DE |
466 | set test_name "setting breakpoint at $function" |
467 | ||
e48883f7 | 468 | send_gdb "$break_command $function\n" |
c906108c SS |
469 | # The first two regexps are what we get with -g, the third is without -g. |
470 | gdb_expect 30 { | |
18ac113b AR |
471 | -re "$break_message \[0-9\]* at .*: file .*, line $decimal.\r\n$gdb_prompt $" {} |
472 | -re "$break_message \[0-9\]*: file .*, line $decimal.\r\n$gdb_prompt $" {} | |
473 | -re "$break_message \[0-9\]* at .*$gdb_prompt $" {} | |
474 | -re "$break_message \[0-9\]* \\(.*\\) pending.*$gdb_prompt $" { | |
78a1a894 | 475 | if {$pending_response == "n"} { |
5b7d0050 DE |
476 | if { $print_fail } { |
477 | fail $test_name | |
55cd6f92 | 478 | } |
78a1a894 DJ |
479 | return 0 |
480 | } | |
481 | } | |
9f27c604 | 482 | -re "Make breakpoint pending.*y or \\\[n\\\]. $" { |
78a1a894 | 483 | send_gdb "$pending_response\n" |
14b1a056 | 484 | exp_continue |
18fe2033 | 485 | } |
28781456 | 486 | -re "A problem internal to GDB has been detected" { |
5b7d0050 DE |
487 | if { $print_fail } { |
488 | fail "$test_name (GDB internal error)" | |
489 | } | |
28781456 JK |
490 | gdb_internal_error_resync |
491 | return 0 | |
492 | } | |
55cd6f92 | 493 | -re "$gdb_prompt $" { |
5b7d0050 DE |
494 | if { $print_fail } { |
495 | fail $test_name | |
496 | } | |
497 | return 0 | |
498 | } | |
499 | eof { | |
500 | if { $print_fail } { | |
501 | fail "$test_name (eof)" | |
55cd6f92 DJ |
502 | } |
503 | return 0 | |
504 | } | |
505 | timeout { | |
5b7d0050 DE |
506 | if { $print_fail } { |
507 | fail "$test_name (timeout)" | |
55cd6f92 DJ |
508 | } |
509 | return 0 | |
510 | } | |
c906108c | 511 | } |
5b7d0050 DE |
512 | if { $print_pass } { |
513 | pass $test_name | |
514 | } | |
ae59b1da | 515 | return 1 |
c906108c SS |
516 | } |
517 | ||
518 | # Set breakpoint at function and run gdb until it breaks there. | |
519 | # Since this is the only breakpoint that will be set, if it stops | |
520 | # at a breakpoint, we will assume it is the one we want. We can't | |
521 | # just compare to "function" because it might be a fully qualified, | |
5b7d0050 DE |
522 | # single quoted C++ function specifier. |
523 | # | |
524 | # If there are additional arguments, pass them to gdb_breakpoint. | |
525 | # We recognize no-message/message ourselves. | |
526 | # The default is no-message. | |
527 | # no-message is messed up here, like gdb_breakpoint: to preserve | |
528 | # historical usage fails are always printed by default. | |
529 | # no-message: turns off printing of fails (and passes, but they're already off) | |
530 | # message: turns on printing of passes (and fails, but they're already on) | |
c906108c | 531 | |
78a1a894 | 532 | proc runto { function args } { |
c906108c SS |
533 | global gdb_prompt |
534 | global decimal | |
535 | ||
536 | delete_breakpoints | |
537 | ||
5b7d0050 DE |
538 | # Default to "no-message". |
539 | set args "no-message $args" | |
540 | ||
541 | set print_pass 0 | |
542 | set print_fail 1 | |
543 | set no_message_loc [lsearch -exact $args no-message] | |
544 | set message_loc [lsearch -exact $args message] | |
545 | # The last one to appear in args wins. | |
546 | if { $no_message_loc > $message_loc } { | |
547 | set print_fail 0 | |
548 | } elseif { $message_loc > $no_message_loc } { | |
549 | set print_pass 1 | |
550 | } | |
551 | ||
552 | set test_name "running to $function in runto" | |
553 | ||
554 | # We need to use eval here to pass our varargs args to gdb_breakpoint | |
555 | # which is also a varargs function. | |
2c47921e DE |
556 | # But we also have to be careful because $function may have multiple |
557 | # elements, and we don't want Tcl to move the remaining elements after | |
558 | # the first to $args. That is why $function is wrapped in {}. | |
559 | if ![eval gdb_breakpoint {$function} $args] { | |
ae59b1da | 560 | return 0 |
c906108c SS |
561 | } |
562 | ||
563 | gdb_run_cmd | |
564 | ||
565 | # the "at foo.c:36" output we get with -g. | |
566 | # the "in func" output we get without -g. | |
567 | gdb_expect 30 { | |
568 | -re "Break.* at .*:$decimal.*$gdb_prompt $" { | |
5b7d0050 DE |
569 | if { $print_pass } { |
570 | pass $test_name | |
571 | } | |
c906108c SS |
572 | return 1 |
573 | } | |
574 | -re "Breakpoint \[0-9\]*, \[0-9xa-f\]* in .*$gdb_prompt $" { | |
5b7d0050 DE |
575 | if { $print_pass } { |
576 | pass $test_name | |
577 | } | |
c906108c SS |
578 | return 1 |
579 | } | |
8e46892c | 580 | -re "The target does not support running in non-stop mode.\r\n$gdb_prompt $" { |
5b7d0050 | 581 | if { $print_fail } { |
bc6c7af4 | 582 | unsupported "non-stop mode not supported" |
5b7d0050 | 583 | } |
8e46892c JK |
584 | return 0 |
585 | } | |
569b05a5 | 586 | -re ".*A problem internal to GDB has been detected" { |
5b7d0050 DE |
587 | if { $print_fail } { |
588 | fail "$test_name (GDB internal error)" | |
589 | } | |
569b05a5 JK |
590 | gdb_internal_error_resync |
591 | return 0 | |
592 | } | |
c906108c | 593 | -re "$gdb_prompt $" { |
5b7d0050 DE |
594 | if { $print_fail } { |
595 | fail $test_name | |
596 | } | |
c906108c SS |
597 | return 0 |
598 | } | |
72c63395 | 599 | eof { |
5b7d0050 DE |
600 | if { $print_fail } { |
601 | fail "$test_name (eof)" | |
602 | } | |
72c63395 JK |
603 | return 0 |
604 | } | |
c906108c | 605 | timeout { |
5b7d0050 DE |
606 | if { $print_fail } { |
607 | fail "$test_name (timeout)" | |
608 | } | |
c906108c SS |
609 | return 0 |
610 | } | |
611 | } | |
5b7d0050 DE |
612 | if { $print_pass } { |
613 | pass $test_name | |
614 | } | |
c906108c SS |
615 | return 1 |
616 | } | |
617 | ||
1d41d75c | 618 | # Ask gdb to run until we hit a breakpoint at main. |
c906108c | 619 | # |
1d41d75c DE |
620 | # N.B. This function deletes all existing breakpoints. |
621 | # If you don't want that, use gdb_start_cmd. | |
622 | ||
c906108c | 623 | proc runto_main { } { |
5b7d0050 | 624 | return [runto main no-message] |
c906108c SS |
625 | } |
626 | ||
4ce44c66 JM |
627 | ### Continue, and expect to hit a breakpoint. |
628 | ### Report a pass or fail, depending on whether it seems to have | |
629 | ### worked. Use NAME as part of the test name; each call to | |
630 | ### continue_to_breakpoint should use a NAME which is unique within | |
631 | ### that test file. | |
74960c60 | 632 | proc gdb_continue_to_breakpoint {name {location_pattern .*}} { |
4ce44c66 JM |
633 | global gdb_prompt |
634 | set full_name "continue to breakpoint: $name" | |
635 | ||
06d97543 | 636 | gdb_test_multiple "continue" $full_name { |
a1624241 | 637 | -re "(?:Breakpoint|Temporary breakpoint) .* (at|in) $location_pattern\r\n$gdb_prompt $" { |
4ce44c66 JM |
638 | pass $full_name |
639 | } | |
4ce44c66 JM |
640 | } |
641 | } | |
642 | ||
643 | ||
039cf96d AC |
644 | # gdb_internal_error_resync: |
645 | # | |
646 | # Answer the questions GDB asks after it reports an internal error | |
647 | # until we get back to a GDB prompt. Decline to quit the debugging | |
648 | # session, and decline to create a core file. Return non-zero if the | |
649 | # resync succeeds. | |
650 | # | |
651 | # This procedure just answers whatever questions come up until it sees | |
652 | # a GDB prompt; it doesn't require you to have matched the input up to | |
653 | # any specific point. However, it only answers questions it sees in | |
654 | # the output itself, so if you've matched a question, you had better | |
655 | # answer it yourself before calling this. | |
656 | # | |
657 | # You can use this function thus: | |
658 | # | |
659 | # gdb_expect { | |
660 | # ... | |
661 | # -re ".*A problem internal to GDB has been detected" { | |
662 | # gdb_internal_error_resync | |
663 | # } | |
664 | # ... | |
665 | # } | |
666 | # | |
667 | proc gdb_internal_error_resync {} { | |
668 | global gdb_prompt | |
669 | ||
5b7d0050 DE |
670 | verbose -log "Resyncing due to internal error." |
671 | ||
039cf96d AC |
672 | set count 0 |
673 | while {$count < 10} { | |
674 | gdb_expect { | |
675 | -re "Quit this debugging session\\? \\(y or n\\) $" { | |
676 | send_gdb "n\n" | |
677 | incr count | |
678 | } | |
679 | -re "Create a core file of GDB\\? \\(y or n\\) $" { | |
680 | send_gdb "n\n" | |
681 | incr count | |
682 | } | |
683 | -re "$gdb_prompt $" { | |
684 | # We're resynchronized. | |
685 | return 1 | |
686 | } | |
687 | timeout { | |
688 | perror "Could not resync from internal error (timeout)" | |
689 | return 0 | |
690 | } | |
691 | } | |
692 | } | |
2b211c59 AC |
693 | perror "Could not resync from internal error (resync count exceeded)" |
694 | return 0 | |
039cf96d AC |
695 | } |
696 | ||
4ce44c66 | 697 | |
2307bd6a | 698 | # gdb_test_multiple COMMAND MESSAGE EXPECT_ARGUMENTS |
8dbfb380 | 699 | # Send a command to gdb; test the result. |
c906108c SS |
700 | # |
701 | # COMMAND is the command to execute, send to GDB with send_gdb. If | |
702 | # this is the null string no command is sent. | |
2307bd6a DJ |
703 | # MESSAGE is a message to be printed with the built-in failure patterns |
704 | # if one of them matches. If MESSAGE is empty COMMAND will be used. | |
705 | # EXPECT_ARGUMENTS will be fed to expect in addition to the standard | |
706 | # patterns. Pattern elements will be evaluated in the caller's | |
707 | # context; action elements will be executed in the caller's context. | |
708 | # Unlike patterns for gdb_test, these patterns should generally include | |
709 | # the final newline and prompt. | |
c906108c SS |
710 | # |
711 | # Returns: | |
2307bd6a DJ |
712 | # 1 if the test failed, according to a built-in failure pattern |
713 | # 0 if only user-supplied patterns matched | |
c906108c SS |
714 | # -1 if there was an internal error. |
715 | # | |
d422fe19 AC |
716 | # You can use this function thus: |
717 | # | |
718 | # gdb_test_multiple "print foo" "test foo" { | |
719 | # -re "expected output 1" { | |
720 | # pass "print foo" | |
721 | # } | |
722 | # -re "expected output 2" { | |
723 | # fail "print foo" | |
724 | # } | |
725 | # } | |
726 | # | |
f71c18e7 PA |
727 | # Like with "expect", you can also specify the spawn id to match with |
728 | # -i "$id". Interesting spawn ids are $inferior_spawn_id and | |
729 | # $gdb_spawn_id. The former matches inferior I/O, while the latter | |
730 | # matches GDB I/O. E.g.: | |
731 | # | |
732 | # send_inferior "hello\n" | |
733 | # gdb_test_multiple "continue" "test echo" { | |
734 | # -i "$inferior_spawn_id" -re "^hello\r\nhello\r\n$" { | |
735 | # pass "got echo" | |
736 | # } | |
737 | # -i "$gdb_spawn_id" -re "Breakpoint.*$gdb_prompt $" { | |
738 | # fail "hit breakpoint" | |
739 | # } | |
740 | # } | |
741 | # | |
fda326dd | 742 | # The standard patterns, such as "Inferior exited..." and "A problem |
f71c18e7 PA |
743 | # ...", all being implicitly appended to that list. These are always |
744 | # expected from $gdb_spawn_id. IOW, callers do not need to worry | |
745 | # about resetting "-i" back to $gdb_spawn_id explicitly. | |
d422fe19 | 746 | # |
2307bd6a | 747 | proc gdb_test_multiple { command message user_code } { |
e11ac3a3 | 748 | global verbose use_gdb_stub |
c3f814a1 | 749 | global gdb_prompt pagination_prompt |
c906108c | 750 | global GDB |
f71c18e7 | 751 | global gdb_spawn_id |
fda326dd | 752 | global inferior_exited_re |
c906108c | 753 | upvar timeout timeout |
c47cebdb | 754 | upvar expect_out expect_out |
749ef8f8 | 755 | global any_spawn_id |
c906108c | 756 | |
2307bd6a DJ |
757 | if { $message == "" } { |
758 | set message $command | |
c906108c | 759 | } |
c906108c | 760 | |
824cc8dd JK |
761 | if [string match "*\[\r\n\]" $command] { |
762 | error "Invalid trailing newline in \"$message\" test" | |
763 | } | |
764 | ||
8344e389 JK |
765 | if [string match "*\[\r\n\]*" $message] { |
766 | error "Invalid newline in \"$message\" test" | |
767 | } | |
768 | ||
e11ac3a3 | 769 | if {$use_gdb_stub |
9bfee719 | 770 | && [regexp -nocase {^\s*(r|run|star|start|at|att|atta|attac|attach)\M} \ |
e11ac3a3 JK |
771 | $command]} { |
772 | error "gdbserver does not support $command without extended-remote" | |
773 | } | |
774 | ||
2307bd6a DJ |
775 | # TCL/EXPECT WART ALERT |
776 | # Expect does something very strange when it receives a single braced | |
777 | # argument. It splits it along word separators and performs substitutions. | |
778 | # This means that { "[ab]" } is evaluated as "[ab]", but { "\[ab\]" } is | |
779 | # evaluated as "\[ab\]". But that's not how TCL normally works; inside a | |
780 | # double-quoted list item, "\[ab\]" is just a long way of representing | |
781 | # "[ab]", because the backslashes will be removed by lindex. | |
782 | ||
783 | # Unfortunately, there appears to be no easy way to duplicate the splitting | |
784 | # that expect will do from within TCL. And many places make use of the | |
785 | # "\[0-9\]" construct, so we need to support that; and some places make use | |
786 | # of the "[func]" construct, so we need to support that too. In order to | |
787 | # get this right we have to substitute quoted list elements differently | |
788 | # from braced list elements. | |
789 | ||
790 | # We do this roughly the same way that Expect does it. We have to use two | |
791 | # lists, because if we leave unquoted newlines in the argument to uplevel | |
792 | # they'll be treated as command separators, and if we escape newlines | |
793 | # we mangle newlines inside of command blocks. This assumes that the | |
794 | # input doesn't contain a pattern which contains actual embedded newlines | |
795 | # at this point! | |
796 | ||
797 | regsub -all {\n} ${user_code} { } subst_code | |
798 | set subst_code [uplevel list $subst_code] | |
799 | ||
800 | set processed_code "" | |
801 | set patterns "" | |
802 | set expecting_action 0 | |
21e24d21 | 803 | set expecting_arg 0 |
2307bd6a DJ |
804 | foreach item $user_code subst_item $subst_code { |
805 | if { $item == "-n" || $item == "-notransfer" || $item == "-nocase" } { | |
806 | lappend processed_code $item | |
807 | continue | |
808 | } | |
21e24d21 PA |
809 | if { $item == "-indices" || $item == "-re" || $item == "-ex" } { |
810 | lappend processed_code $item | |
811 | continue | |
812 | } | |
f71c18e7 | 813 | if { $item == "-timeout" || $item == "-i" } { |
21e24d21 PA |
814 | set expecting_arg 1 |
815 | lappend processed_code $item | |
816 | continue | |
817 | } | |
818 | if { $expecting_arg } { | |
819 | set expecting_arg 0 | |
71c0ee8c | 820 | lappend processed_code $subst_item |
2307bd6a DJ |
821 | continue |
822 | } | |
823 | if { $expecting_action } { | |
824 | lappend processed_code "uplevel [list $item]" | |
825 | set expecting_action 0 | |
826 | # Cosmetic, no effect on the list. | |
827 | append processed_code "\n" | |
828 | continue | |
829 | } | |
830 | set expecting_action 1 | |
831 | lappend processed_code $subst_item | |
832 | if {$patterns != ""} { | |
833 | append patterns "; " | |
834 | } | |
835 | append patterns "\"$subst_item\"" | |
c906108c SS |
836 | } |
837 | ||
2307bd6a DJ |
838 | # Also purely cosmetic. |
839 | regsub -all {\r} $patterns {\\r} patterns | |
840 | regsub -all {\n} $patterns {\\n} patterns | |
841 | ||
c906108c SS |
842 | if $verbose>2 then { |
843 | send_user "Sending \"$command\" to gdb\n" | |
2307bd6a | 844 | send_user "Looking to match \"$patterns\"\n" |
c906108c SS |
845 | send_user "Message is \"$message\"\n" |
846 | } | |
847 | ||
848 | set result -1 | |
4ec70201 | 849 | set string "${command}\n" |
c906108c | 850 | if { $command != "" } { |
543a9323 | 851 | set multi_line_re "\[\r\n\] *>" |
c906108c | 852 | while { "$string" != "" } { |
4ec70201 PA |
853 | set foo [string first "\n" "$string"] |
854 | set len [string length "$string"] | |
c906108c | 855 | if { $foo < [expr $len - 1] } { |
4ec70201 | 856 | set str [string range "$string" 0 $foo] |
c906108c | 857 | if { [send_gdb "$str"] != "" } { |
4ec70201 | 858 | global suppress_flag |
c906108c SS |
859 | |
860 | if { ! $suppress_flag } { | |
4ec70201 | 861 | perror "Couldn't send $command to GDB." |
c906108c | 862 | } |
4ec70201 | 863 | fail "$message" |
ae59b1da | 864 | return $result |
c906108c | 865 | } |
a0b3c4fd JM |
866 | # since we're checking if each line of the multi-line |
867 | # command are 'accepted' by GDB here, | |
868 | # we need to set -notransfer expect option so that | |
869 | # command output is not lost for pattern matching | |
870 | # - guo | |
5f279fa6 | 871 | gdb_expect 2 { |
543a9323 | 872 | -notransfer -re "$multi_line_re$" { verbose "partial: match" 3 } |
5f279fa6 | 873 | timeout { verbose "partial: timeout" 3 } |
c906108c | 874 | } |
4ec70201 | 875 | set string [string range "$string" [expr $foo + 1] end] |
543a9323 | 876 | set multi_line_re "$multi_line_re.*\[\r\n\] *>" |
c906108c | 877 | } else { |
4ec70201 | 878 | break |
c906108c SS |
879 | } |
880 | } | |
881 | if { "$string" != "" } { | |
882 | if { [send_gdb "$string"] != "" } { | |
4ec70201 | 883 | global suppress_flag |
c906108c SS |
884 | |
885 | if { ! $suppress_flag } { | |
4ec70201 | 886 | perror "Couldn't send $command to GDB." |
c906108c | 887 | } |
4ec70201 | 888 | fail "$message" |
ae59b1da | 889 | return $result |
c906108c SS |
890 | } |
891 | } | |
892 | } | |
893 | ||
2307bd6a | 894 | set code { |
9bfee719 MR |
895 | -re ".*A problem internal to GDB has been detected" { |
896 | fail "$message (GDB internal error)" | |
897 | gdb_internal_error_resync | |
28054d69 | 898 | set result -1 |
9bfee719 MR |
899 | } |
900 | -re "\\*\\*\\* DOSEXIT code.*" { | |
901 | if { $message != "" } { | |
4ec70201 | 902 | fail "$message" |
9bfee719 | 903 | } |
4ec70201 PA |
904 | gdb_suppress_entire_file "GDB died" |
905 | set result -1 | |
9bfee719 | 906 | } |
b0f4b84b DJ |
907 | } |
908 | append code $processed_code | |
909 | append code { | |
f71c18e7 PA |
910 | # Reset the spawn id, in case the processed code used -i. |
911 | -i "$gdb_spawn_id" | |
912 | ||
9bfee719 | 913 | -re "Ending remote debugging.*$gdb_prompt $" { |
c906108c SS |
914 | if ![isnative] then { |
915 | warning "Can`t communicate to remote target." | |
916 | } | |
917 | gdb_exit | |
918 | gdb_start | |
919 | set result -1 | |
920 | } | |
9bfee719 | 921 | -re "Undefined\[a-z\]* command:.*$gdb_prompt $" { |
c906108c | 922 | perror "Undefined command \"$command\"." |
9bfee719 | 923 | fail "$message" |
c906108c SS |
924 | set result 1 |
925 | } | |
9bfee719 | 926 | -re "Ambiguous command.*$gdb_prompt $" { |
c906108c | 927 | perror "\"$command\" is not a unique command name." |
9bfee719 | 928 | fail "$message" |
c906108c SS |
929 | set result 1 |
930 | } | |
9bfee719 | 931 | -re "$inferior_exited_re with code \[0-9\]+.*$gdb_prompt $" { |
c906108c | 932 | if ![string match "" $message] then { |
ed4c619a | 933 | set errmsg "$message (the program exited)" |
c906108c | 934 | } else { |
ed4c619a | 935 | set errmsg "$command (the program exited)" |
c906108c SS |
936 | } |
937 | fail "$errmsg" | |
2307bd6a | 938 | set result -1 |
cb9a9d3e | 939 | } |
9bfee719 | 940 | -re "$inferior_exited_re normally.*$gdb_prompt $" { |
cb9a9d3e | 941 | if ![string match "" $message] then { |
ed4c619a | 942 | set errmsg "$message (the program exited)" |
cb9a9d3e | 943 | } else { |
ed4c619a | 944 | set errmsg "$command (the program exited)" |
cb9a9d3e MS |
945 | } |
946 | fail "$errmsg" | |
2307bd6a | 947 | set result -1 |
c906108c | 948 | } |
9bfee719 | 949 | -re "The program is not being run.*$gdb_prompt $" { |
c906108c | 950 | if ![string match "" $message] then { |
ed4c619a | 951 | set errmsg "$message (the program is no longer running)" |
c906108c | 952 | } else { |
ed4c619a | 953 | set errmsg "$command (the program is no longer running)" |
c906108c SS |
954 | } |
955 | fail "$errmsg" | |
2307bd6a | 956 | set result -1 |
c906108c | 957 | } |
9bfee719 | 958 | -re "\r\n$gdb_prompt $" { |
c906108c SS |
959 | if ![string match "" $message] then { |
960 | fail "$message" | |
961 | } | |
962 | set result 1 | |
963 | } | |
c3f814a1 | 964 | -re "$pagination_prompt" { |
c906108c SS |
965 | send_gdb "\n" |
966 | perror "Window too small." | |
9bfee719 | 967 | fail "$message" |
2307bd6a | 968 | set result -1 |
c906108c | 969 | } |
b598bfda | 970 | -re "\\((y or n|y or \\\[n\\\]|\\\[y\\\] or n)\\) " { |
c906108c | 971 | send_gdb "n\n" |
b598bfda DJ |
972 | gdb_expect -re "$gdb_prompt $" |
973 | fail "$message (got interactive prompt)" | |
974 | set result -1 | |
975 | } | |
976 | -re "\\\[0\\\] cancel\r\n\\\[1\\\] all.*\r\n> $" { | |
977 | send_gdb "0\n" | |
978 | gdb_expect -re "$gdb_prompt $" | |
979 | fail "$message (got breakpoint menu)" | |
2307bd6a | 980 | set result -1 |
c906108c | 981 | } |
749ef8f8 | 982 | |
fe1a5cad TV |
983 | -i $gdb_spawn_id |
984 | eof { | |
985 | perror "GDB process no longer exists" | |
986 | set wait_status [wait -i $gdb_spawn_id] | |
987 | verbose -log "GDB process exited with wait status $wait_status" | |
988 | if { $message != "" } { | |
989 | fail "$message" | |
990 | } | |
991 | return -1 | |
992 | } | |
993 | ||
749ef8f8 PA |
994 | # Patterns below apply to any spawn id specified. |
995 | -i $any_spawn_id | |
9bfee719 MR |
996 | eof { |
997 | perror "Process no longer exists" | |
998 | if { $message != "" } { | |
999 | fail "$message" | |
1000 | } | |
1001 | return -1 | |
c906108c | 1002 | } |
9bfee719 | 1003 | full_buffer { |
c906108c | 1004 | perror "internal buffer is full." |
9bfee719 | 1005 | fail "$message" |
2307bd6a | 1006 | set result -1 |
c906108c SS |
1007 | } |
1008 | timeout { | |
1009 | if ![string match "" $message] then { | |
1010 | fail "$message (timeout)" | |
1011 | } | |
1012 | set result 1 | |
1013 | } | |
1014 | } | |
2307bd6a DJ |
1015 | |
1016 | set result 0 | |
4a40f85a | 1017 | set code [catch {gdb_expect $code} string] |
04f6ecf2 | 1018 | if {$code == 1} { |
4ec70201 | 1019 | global errorInfo errorCode |
04f6ecf2 | 1020 | return -code error -errorinfo $errorInfo -errorcode $errorCode $string |
d6d7a51a | 1021 | } elseif {$code > 1} { |
04f6ecf2 DJ |
1022 | return -code $code $string |
1023 | } | |
c906108c SS |
1024 | return $result |
1025 | } | |
2307bd6a DJ |
1026 | |
1027 | # gdb_test COMMAND PATTERN MESSAGE QUESTION RESPONSE | |
1028 | # Send a command to gdb; test the result. | |
1029 | # | |
1030 | # COMMAND is the command to execute, send to GDB with send_gdb. If | |
1031 | # this is the null string no command is sent. | |
1032 | # PATTERN is the pattern to match for a PASS, and must NOT include | |
79fad5b8 SL |
1033 | # the \r\n sequence immediately before the gdb prompt. This argument |
1034 | # may be omitted to just match the prompt, ignoring whatever output | |
1035 | # precedes it. | |
2307bd6a DJ |
1036 | # MESSAGE is an optional message to be printed. If this is |
1037 | # omitted, then the pass/fail messages use the command string as the | |
1038 | # message. (If this is the empty string, then sometimes we don't | |
1039 | # call pass or fail at all; I don't understand this at all.) | |
1040 | # QUESTION is a question GDB may ask in response to COMMAND, like | |
1041 | # "are you sure?" | |
1042 | # RESPONSE is the response to send if QUESTION appears. | |
1043 | # | |
1044 | # Returns: | |
1045 | # 1 if the test failed, | |
1046 | # 0 if the test passes, | |
1047 | # -1 if there was an internal error. | |
1048 | # | |
1049 | proc gdb_test { args } { | |
2307bd6a | 1050 | global gdb_prompt |
2307bd6a DJ |
1051 | upvar timeout timeout |
1052 | ||
1053 | if [llength $args]>2 then { | |
1054 | set message [lindex $args 2] | |
1055 | } else { | |
1056 | set message [lindex $args 0] | |
1057 | } | |
1058 | set command [lindex $args 0] | |
1059 | set pattern [lindex $args 1] | |
1060 | ||
1061 | if [llength $args]==5 { | |
4ec70201 PA |
1062 | set question_string [lindex $args 3] |
1063 | set response_string [lindex $args 4] | |
2307bd6a DJ |
1064 | } else { |
1065 | set question_string "^FOOBAR$" | |
1066 | } | |
1067 | ||
1068 | return [gdb_test_multiple $command $message { | |
75312ae3 | 1069 | -re "\[\r\n\]*(?:$pattern)\[\r\n\]+$gdb_prompt $" { |
2307bd6a DJ |
1070 | if ![string match "" $message] then { |
1071 | pass "$message" | |
1072 | } | |
1073 | } | |
1074 | -re "(${question_string})$" { | |
4ec70201 PA |
1075 | send_gdb "$response_string\n" |
1076 | exp_continue | |
2307bd6a DJ |
1077 | } |
1078 | }] | |
1079 | } | |
a7b75dfd JB |
1080 | |
1081 | # gdb_test_no_output COMMAND MESSAGE | |
1082 | # Send a command to GDB and verify that this command generated no output. | |
1083 | # | |
1084 | # See gdb_test_multiple for a description of the COMMAND and MESSAGE | |
1085 | # parameters. If MESSAGE is ommitted, then COMMAND will be used as | |
c22decce JB |
1086 | # the message. (If MESSAGE is the empty string, then sometimes we do not |
1087 | # call pass or fail at all; I don't understand this at all.) | |
a7b75dfd JB |
1088 | |
1089 | proc gdb_test_no_output { args } { | |
1090 | global gdb_prompt | |
1091 | set command [lindex $args 0] | |
1092 | if [llength $args]>1 then { | |
1093 | set message [lindex $args 1] | |
1094 | } else { | |
1095 | set message $command | |
1096 | } | |
1097 | ||
1098 | set command_regex [string_to_regexp $command] | |
1099 | gdb_test_multiple $command $message { | |
1100 | -re "^$command_regex\r\n$gdb_prompt $" { | |
c22decce JB |
1101 | if ![string match "" $message] then { |
1102 | pass "$message" | |
1103 | } | |
a7b75dfd JB |
1104 | } |
1105 | } | |
1106 | } | |
1107 | ||
6b0ecdc2 DE |
1108 | # Send a command and then wait for a sequence of outputs. |
1109 | # This is useful when the sequence is long and contains ".*", a single | |
1110 | # regexp to match the entire output can get a timeout much easier. | |
1111 | # | |
968a13f8 PA |
1112 | # COMMAND is the command to execute, send to GDB with send_gdb. If |
1113 | # this is the null string no command is sent. | |
6b0ecdc2 DE |
1114 | # TEST_NAME is passed to pass/fail. COMMAND is used if TEST_NAME is "". |
1115 | # EXPECTED_OUTPUT_LIST is a list of regexps of expected output, which are | |
1116 | # processed in order, and all must be present in the output. | |
1117 | # | |
1118 | # It is unnecessary to specify ".*" at the beginning or end of any regexp, | |
1119 | # there is an implicit ".*" between each element of EXPECTED_OUTPUT_LIST. | |
1120 | # There is also an implicit ".*" between the last regexp and the gdb prompt. | |
1121 | # | |
1122 | # Like gdb_test and gdb_test_multiple, the output is expected to end with the | |
1123 | # gdb prompt, which must not be specified in EXPECTED_OUTPUT_LIST. | |
5fa290c1 DE |
1124 | # |
1125 | # Returns: | |
1126 | # 1 if the test failed, | |
1127 | # 0 if the test passes, | |
1128 | # -1 if there was an internal error. | |
6b0ecdc2 DE |
1129 | |
1130 | proc gdb_test_sequence { command test_name expected_output_list } { | |
1131 | global gdb_prompt | |
1132 | if { $test_name == "" } { | |
1133 | set test_name $command | |
1134 | } | |
1135 | lappend expected_output_list ""; # implicit ".*" before gdb prompt | |
968a13f8 PA |
1136 | if { $command != "" } { |
1137 | send_gdb "$command\n" | |
1138 | } | |
5fa290c1 | 1139 | return [gdb_expect_list $test_name "$gdb_prompt $" $expected_output_list] |
6b0ecdc2 DE |
1140 | } |
1141 | ||
c906108c SS |
1142 | \f |
1143 | # Test that a command gives an error. For pass or fail, return | |
1144 | # a 1 to indicate that more tests can proceed. However a timeout | |
1145 | # is a serious error, generates a special fail message, and causes | |
1146 | # a 0 to be returned to indicate that more tests are likely to fail | |
1147 | # as well. | |
1148 | ||
1149 | proc test_print_reject { args } { | |
1150 | global gdb_prompt | |
1151 | global verbose | |
1152 | ||
1153 | if [llength $args]==2 then { | |
1154 | set expectthis [lindex $args 1] | |
1155 | } else { | |
1156 | set expectthis "should never match this bogus string" | |
1157 | } | |
1158 | set sendthis [lindex $args 0] | |
1159 | if $verbose>2 then { | |
1160 | send_user "Sending \"$sendthis\" to gdb\n" | |
1161 | send_user "Looking to match \"$expectthis\"\n" | |
1162 | } | |
1163 | send_gdb "$sendthis\n" | |
1164 | #FIXME: Should add timeout as parameter. | |
1165 | gdb_expect { | |
1166 | -re "A .* in expression.*\\.*$gdb_prompt $" { | |
1167 | pass "reject $sendthis" | |
1168 | return 1 | |
1169 | } | |
1170 | -re "Invalid syntax in expression.*$gdb_prompt $" { | |
1171 | pass "reject $sendthis" | |
1172 | return 1 | |
1173 | } | |
1174 | -re "Junk after end of expression.*$gdb_prompt $" { | |
1175 | pass "reject $sendthis" | |
1176 | return 1 | |
1177 | } | |
1178 | -re "Invalid number.*$gdb_prompt $" { | |
1179 | pass "reject $sendthis" | |
1180 | return 1 | |
1181 | } | |
1182 | -re "Invalid character constant.*$gdb_prompt $" { | |
1183 | pass "reject $sendthis" | |
1184 | return 1 | |
1185 | } | |
1186 | -re "No symbol table is loaded.*$gdb_prompt $" { | |
1187 | pass "reject $sendthis" | |
1188 | return 1 | |
1189 | } | |
1190 | -re "No symbol .* in current context.*$gdb_prompt $" { | |
1191 | pass "reject $sendthis" | |
1192 | return 1 | |
1193 | } | |
c4b7bc2b JB |
1194 | -re "Unmatched single quote.*$gdb_prompt $" { |
1195 | pass "reject $sendthis" | |
1196 | return 1 | |
1197 | } | |
1198 | -re "A character constant must contain at least one character.*$gdb_prompt $" { | |
1199 | pass "reject $sendthis" | |
1200 | return 1 | |
1201 | } | |
c906108c SS |
1202 | -re "$expectthis.*$gdb_prompt $" { |
1203 | pass "reject $sendthis" | |
1204 | return 1 | |
1205 | } | |
1206 | -re ".*$gdb_prompt $" { | |
1207 | fail "reject $sendthis" | |
1208 | return 1 | |
1209 | } | |
1210 | default { | |
1211 | fail "reject $sendthis (eof or timeout)" | |
1212 | return 0 | |
1213 | } | |
1214 | } | |
1215 | } | |
1216 | \f | |
c906108c SS |
1217 | |
1218 | # Same as gdb_test, but the second parameter is not a regexp, | |
1219 | # but a string that must match exactly. | |
1220 | ||
1221 | proc gdb_test_exact { args } { | |
1222 | upvar timeout timeout | |
1223 | ||
1224 | set command [lindex $args 0] | |
1225 | ||
1226 | # This applies a special meaning to a null string pattern. Without | |
1227 | # this, "$pattern\r\n$gdb_prompt $" will match anything, including error | |
1228 | # messages from commands that should have no output except a new | |
1229 | # prompt. With this, only results of a null string will match a null | |
1230 | # string pattern. | |
1231 | ||
1232 | set pattern [lindex $args 1] | |
1233 | if [string match $pattern ""] { | |
1234 | set pattern [string_to_regexp [lindex $args 0]] | |
1235 | } else { | |
1236 | set pattern [string_to_regexp [lindex $args 1]] | |
1237 | } | |
1238 | ||
1239 | # It is most natural to write the pattern argument with only | |
1240 | # embedded \n's, especially if you are trying to avoid Tcl quoting | |
1241 | # problems. But gdb_expect really wants to see \r\n in patterns. So | |
1242 | # transform the pattern here. First transform \r\n back to \n, in | |
1243 | # case some users of gdb_test_exact already do the right thing. | |
1244 | regsub -all "\r\n" $pattern "\n" pattern | |
1245 | regsub -all "\n" $pattern "\r\n" pattern | |
1246 | if [llength $args]==3 then { | |
1247 | set message [lindex $args 2] | |
1248 | } else { | |
1249 | set message $command | |
1250 | } | |
1251 | ||
1252 | return [gdb_test $command $pattern $message] | |
1253 | } | |
2dfb8c17 DE |
1254 | |
1255 | # Wrapper around gdb_test_multiple that looks for a list of expected | |
1256 | # output elements, but which can appear in any order. | |
1257 | # CMD is the gdb command. | |
1258 | # NAME is the name of the test. | |
1259 | # ELM_FIND_REGEXP specifies how to partition the output into elements to | |
1260 | # compare. | |
1261 | # ELM_EXTRACT_REGEXP specifies the part of ELM_FIND_REGEXP to compare. | |
1262 | # RESULT_MATCH_LIST is a list of exact matches for each expected element. | |
1263 | # All elements of RESULT_MATCH_LIST must appear for the test to pass. | |
1264 | # | |
1265 | # A typical use of ELM_FIND_REGEXP/ELM_EXTRACT_REGEXP is to extract one line | |
1266 | # of text per element and then strip trailing \r\n's. | |
1267 | # Example: | |
1268 | # gdb_test_list_exact "foo" "bar" \ | |
eec52c44 PM |
1269 | # "\[^\r\n\]+\[\r\n\]+" \ |
1270 | # "\[^\r\n\]+" \ | |
2dfb8c17 DE |
1271 | # { \ |
1272 | # {expected result 1} \ | |
1273 | # {expected result 2} \ | |
1274 | # } | |
1275 | ||
1276 | proc gdb_test_list_exact { cmd name elm_find_regexp elm_extract_regexp result_match_list } { | |
1277 | global gdb_prompt | |
1278 | ||
1279 | set matches [lsort $result_match_list] | |
1280 | set seen {} | |
1281 | gdb_test_multiple $cmd $name { | |
1282 | "$cmd\[\r\n\]" { exp_continue } | |
1283 | -re $elm_find_regexp { | |
1284 | set str $expect_out(0,string) | |
1285 | verbose -log "seen: $str" 3 | |
1286 | regexp -- $elm_extract_regexp $str elm_seen | |
1287 | verbose -log "extracted: $elm_seen" 3 | |
1288 | lappend seen $elm_seen | |
1289 | exp_continue | |
1290 | } | |
1291 | -re "$gdb_prompt $" { | |
1292 | set failed "" | |
1293 | foreach got [lsort $seen] have $matches { | |
1294 | if {![string equal $got $have]} { | |
1295 | set failed $have | |
1296 | break | |
1297 | } | |
1298 | } | |
1299 | if {[string length $failed] != 0} { | |
1300 | fail "$name ($failed not found)" | |
1301 | } else { | |
1302 | pass $name | |
1303 | } | |
1304 | } | |
1305 | } | |
1306 | } | |
188a61b4 PA |
1307 | |
1308 | # gdb_test_stdio COMMAND INFERIOR_PATTERN GDB_PATTERN MESSAGE | |
1309 | # Send a command to gdb; expect inferior and gdb output. | |
1310 | # | |
1311 | # See gdb_test_multiple for a description of the COMMAND and MESSAGE | |
1312 | # parameters. | |
1313 | # | |
1314 | # INFERIOR_PATTERN is the pattern to match against inferior output. | |
1315 | # | |
1316 | # GDB_PATTERN is the pattern to match against gdb output, and must NOT | |
1317 | # include the \r\n sequence immediately before the gdb prompt, nor the | |
1318 | # prompt. The default is empty. | |
1319 | # | |
1320 | # Both inferior and gdb patterns must match for a PASS. | |
1321 | # | |
1322 | # If MESSAGE is ommitted, then COMMAND will be used as the message. | |
1323 | # | |
1324 | # Returns: | |
1325 | # 1 if the test failed, | |
1326 | # 0 if the test passes, | |
1327 | # -1 if there was an internal error. | |
1328 | # | |
1329 | ||
1330 | proc gdb_test_stdio {command inferior_pattern {gdb_pattern ""} {message ""}} { | |
1331 | global inferior_spawn_id gdb_spawn_id | |
1332 | global gdb_prompt | |
1333 | ||
1334 | if {$message == ""} { | |
1335 | set message $command | |
1336 | } | |
1337 | ||
1338 | set inferior_matched 0 | |
1339 | set gdb_matched 0 | |
1340 | ||
1341 | # Use an indirect spawn id list, and remove the inferior spawn id | |
1342 | # from the expected output as soon as it matches, in case | |
1343 | # $inferior_pattern happens to be a prefix of the resulting full | |
1344 | # gdb pattern below (e.g., "\r\n"). | |
1345 | global gdb_test_stdio_spawn_id_list | |
1346 | set gdb_test_stdio_spawn_id_list "$inferior_spawn_id" | |
1347 | ||
1348 | # Note that if $inferior_spawn_id and $gdb_spawn_id are different, | |
1349 | # then we may see gdb's output arriving before the inferior's | |
1350 | # output. | |
1351 | set res [gdb_test_multiple $command $message { | |
1352 | -i gdb_test_stdio_spawn_id_list -re "$inferior_pattern" { | |
1353 | set inferior_matched 1 | |
1354 | if {!$gdb_matched} { | |
1355 | set gdb_test_stdio_spawn_id_list "" | |
1356 | exp_continue | |
1357 | } | |
1358 | } | |
1359 | -i $gdb_spawn_id -re "$gdb_pattern\r\n$gdb_prompt $" { | |
1360 | set gdb_matched 1 | |
1361 | if {!$inferior_matched} { | |
1362 | exp_continue | |
1363 | } | |
1364 | } | |
1365 | }] | |
1366 | if {$res == 0} { | |
1367 | pass $message | |
1368 | } else { | |
1369 | verbose -log "inferior_matched=$inferior_matched, gdb_matched=$gdb_matched" | |
1370 | } | |
1371 | return $res | |
1372 | } | |
1373 | ||
c906108c | 1374 | \f |
bd293940 PA |
1375 | |
1376 | # Issue a PASS and return true if evaluating CONDITION in the caller's | |
1377 | # frame returns true, and issue a FAIL and return false otherwise. | |
1378 | # MESSAGE is the pass/fail message to be printed. If MESSAGE is | |
1379 | # omitted or is empty, then the pass/fail messages use the condition | |
1380 | # string as the message. | |
1381 | ||
1382 | proc gdb_assert { condition {message ""} } { | |
1383 | if { $message == ""} { | |
1384 | set message $condition | |
1385 | } | |
1386 | ||
1387 | set res [uplevel 1 expr $condition] | |
1388 | if {!$res} { | |
1389 | fail $message | |
1390 | } else { | |
1391 | pass $message | |
1392 | } | |
1393 | return $res | |
1394 | } | |
1395 | ||
c906108c SS |
1396 | proc gdb_reinitialize_dir { subdir } { |
1397 | global gdb_prompt | |
1398 | ||
1399 | if [is_remote host] { | |
ae59b1da | 1400 | return "" |
c906108c SS |
1401 | } |
1402 | send_gdb "dir\n" | |
1403 | gdb_expect 60 { | |
1404 | -re "Reinitialize source path to empty.*y or n. " { | |
1405 | send_gdb "y\n" | |
1406 | gdb_expect 60 { | |
1407 | -re "Source directories searched.*$gdb_prompt $" { | |
1408 | send_gdb "dir $subdir\n" | |
1409 | gdb_expect 60 { | |
1410 | -re "Source directories searched.*$gdb_prompt $" { | |
1411 | verbose "Dir set to $subdir" | |
1412 | } | |
1413 | -re "$gdb_prompt $" { | |
1414 | perror "Dir \"$subdir\" failed." | |
1415 | } | |
1416 | } | |
1417 | } | |
1418 | -re "$gdb_prompt $" { | |
1419 | perror "Dir \"$subdir\" failed." | |
1420 | } | |
1421 | } | |
1422 | } | |
1423 | -re "$gdb_prompt $" { | |
1424 | perror "Dir \"$subdir\" failed." | |
1425 | } | |
1426 | } | |
1427 | } | |
1428 | ||
1429 | # | |
1430 | # gdb_exit -- exit the GDB, killing the target program if necessary | |
1431 | # | |
1432 | proc default_gdb_exit {} { | |
1433 | global GDB | |
6b8ce727 | 1434 | global INTERNAL_GDBFLAGS GDBFLAGS |
c906108c | 1435 | global verbose |
51f77c37 | 1436 | global gdb_spawn_id inferior_spawn_id |
5e92f71a | 1437 | global inotify_log_file |
c906108c | 1438 | |
4ec70201 | 1439 | gdb_stop_suppressing_tests |
c906108c SS |
1440 | |
1441 | if ![info exists gdb_spawn_id] { | |
4ec70201 | 1442 | return |
c906108c SS |
1443 | } |
1444 | ||
6b8ce727 | 1445 | verbose "Quitting $GDB $INTERNAL_GDBFLAGS $GDBFLAGS" |
c906108c | 1446 | |
5e92f71a TT |
1447 | if {[info exists inotify_log_file] && [file exists $inotify_log_file]} { |
1448 | set fd [open $inotify_log_file] | |
1449 | set data [read -nonewline $fd] | |
1450 | close $fd | |
1451 | ||
1452 | if {[string compare $data ""] != 0} { | |
1453 | warning "parallel-unsafe file creations noticed" | |
1454 | ||
1455 | # Clear the log. | |
1456 | set fd [open $inotify_log_file w] | |
1457 | close $fd | |
1458 | } | |
1459 | } | |
1460 | ||
c906108c | 1461 | if { [is_remote host] && [board_info host exists fileid] } { |
4ec70201 | 1462 | send_gdb "quit\n" |
c906108c SS |
1463 | gdb_expect 10 { |
1464 | -re "y or n" { | |
4ec70201 PA |
1465 | send_gdb "y\n" |
1466 | exp_continue | |
c906108c SS |
1467 | } |
1468 | -re "DOSEXIT code" { } | |
1469 | default { } | |
1470 | } | |
1471 | } | |
1472 | ||
1473 | if ![is_remote host] { | |
4ec70201 | 1474 | remote_close host |
c906108c SS |
1475 | } |
1476 | unset gdb_spawn_id | |
51f77c37 | 1477 | unset inferior_spawn_id |
c906108c SS |
1478 | } |
1479 | ||
3e3ffd2b | 1480 | # Load a file into the debugger. |
2db8e78e | 1481 | # The return value is 0 for success, -1 for failure. |
c906108c | 1482 | # |
2db8e78e MC |
1483 | # This procedure also set the global variable GDB_FILE_CMD_DEBUG_INFO |
1484 | # to one of these values: | |
3e3ffd2b | 1485 | # |
2db8e78e MC |
1486 | # debug file was loaded successfully and has debug information |
1487 | # nodebug file was loaded successfully and has no debug information | |
608e2dbb TT |
1488 | # lzma file was loaded, .gnu_debugdata found, but no LZMA support |
1489 | # compiled in | |
2db8e78e | 1490 | # fail file was not loaded |
c906108c | 1491 | # |
2db8e78e MC |
1492 | # I tried returning this information as part of the return value, |
1493 | # but ran into a mess because of the many re-implementations of | |
1494 | # gdb_load in config/*.exp. | |
3e3ffd2b | 1495 | # |
2db8e78e MC |
1496 | # TODO: gdb.base/sepdebug.exp and gdb.stabs/weird.exp might be able to use |
1497 | # this if they can get more information set. | |
3e3ffd2b | 1498 | |
c906108c | 1499 | proc gdb_file_cmd { arg } { |
3e3ffd2b | 1500 | global gdb_prompt |
c906108c | 1501 | global verbose |
c906108c | 1502 | global GDB |
b741e217 DJ |
1503 | global last_loaded_file |
1504 | ||
975531db | 1505 | # Save this for the benefit of gdbserver-support.exp. |
b741e217 | 1506 | set last_loaded_file $arg |
c906108c | 1507 | |
2db8e78e MC |
1508 | # Set whether debug info was found. |
1509 | # Default to "fail". | |
1510 | global gdb_file_cmd_debug_info | |
1511 | set gdb_file_cmd_debug_info "fail" | |
1512 | ||
c906108c | 1513 | if [is_remote host] { |
3e3ffd2b | 1514 | set arg [remote_download host $arg] |
c906108c | 1515 | if { $arg == "" } { |
2db8e78e MC |
1516 | perror "download failed" |
1517 | return -1 | |
c906108c SS |
1518 | } |
1519 | } | |
1520 | ||
4c42eaff DJ |
1521 | # The file command used to kill the remote target. For the benefit |
1522 | # of the testsuite, preserve this behavior. | |
1523 | send_gdb "kill\n" | |
1524 | gdb_expect 120 { | |
1525 | -re "Kill the program being debugged. .y or n. $" { | |
1526 | send_gdb "y\n" | |
1527 | verbose "\t\tKilling previous program being debugged" | |
1528 | exp_continue | |
1529 | } | |
1530 | -re "$gdb_prompt $" { | |
1531 | # OK. | |
1532 | } | |
1533 | } | |
1534 | ||
c906108c SS |
1535 | send_gdb "file $arg\n" |
1536 | gdb_expect 120 { | |
3453e7e4 | 1537 | -re "Reading symbols from.*LZMA support was disabled.*$gdb_prompt $" { |
608e2dbb TT |
1538 | verbose "\t\tLoaded $arg into $GDB; .gnu_debugdata found but no LZMA available" |
1539 | set gdb_file_cmd_debug_info "lzma" | |
1540 | return 0 | |
1541 | } | |
3453e7e4 | 1542 | -re "Reading symbols from.*no debugging symbols found.*$gdb_prompt $" { |
975531db | 1543 | verbose "\t\tLoaded $arg into $GDB with no debugging symbols" |
2db8e78e MC |
1544 | set gdb_file_cmd_debug_info "nodebug" |
1545 | return 0 | |
3e3ffd2b | 1546 | } |
3453e7e4 | 1547 | -re "Reading symbols from.*$gdb_prompt $" { |
975531db | 1548 | verbose "\t\tLoaded $arg into $GDB" |
2db8e78e MC |
1549 | set gdb_file_cmd_debug_info "debug" |
1550 | return 0 | |
c906108c | 1551 | } |
c906108c SS |
1552 | -re "Load new symbol table from \".*\".*y or n. $" { |
1553 | send_gdb "y\n" | |
1554 | gdb_expect 120 { | |
3453e7e4 | 1555 | -re "Reading symbols from.*$gdb_prompt $" { |
c906108c | 1556 | verbose "\t\tLoaded $arg with new symbol table into $GDB" |
2db8e78e MC |
1557 | set gdb_file_cmd_debug_info "debug" |
1558 | return 0 | |
c906108c SS |
1559 | } |
1560 | timeout { | |
975531db | 1561 | perror "Couldn't load $arg, other program already loaded (timeout)." |
2db8e78e | 1562 | return -1 |
c906108c | 1563 | } |
975531db DE |
1564 | eof { |
1565 | perror "Couldn't load $arg, other program already loaded (eof)." | |
1566 | return -1 | |
1567 | } | |
c906108c SS |
1568 | } |
1569 | } | |
1570 | -re "No such file or directory.*$gdb_prompt $" { | |
2db8e78e MC |
1571 | perror "($arg) No such file or directory" |
1572 | return -1 | |
c906108c | 1573 | } |
04e7407c | 1574 | -re "A problem internal to GDB has been detected" { |
5b7d0050 | 1575 | fail "($arg) (GDB internal error)" |
04e7407c JK |
1576 | gdb_internal_error_resync |
1577 | return -1 | |
1578 | } | |
c906108c | 1579 | -re "$gdb_prompt $" { |
975531db | 1580 | perror "Couldn't load $arg into $GDB." |
2db8e78e | 1581 | return -1 |
c906108c SS |
1582 | } |
1583 | timeout { | |
975531db | 1584 | perror "Couldn't load $arg into $GDB (timeout)." |
2db8e78e | 1585 | return -1 |
c906108c SS |
1586 | } |
1587 | eof { | |
1588 | # This is an attempt to detect a core dump, but seems not to | |
1589 | # work. Perhaps we need to match .* followed by eof, in which | |
1590 | # gdb_expect does not seem to have a way to do that. | |
975531db | 1591 | perror "Couldn't load $arg into $GDB (eof)." |
2db8e78e | 1592 | return -1 |
c906108c SS |
1593 | } |
1594 | } | |
1595 | } | |
1596 | ||
94696ad3 PA |
1597 | # Default gdb_spawn procedure. |
1598 | ||
1599 | proc default_gdb_spawn { } { | |
1600 | global use_gdb_stub | |
c906108c | 1601 | global GDB |
6b8ce727 | 1602 | global INTERNAL_GDBFLAGS GDBFLAGS |
4ec70201 | 1603 | global gdb_spawn_id |
c906108c | 1604 | |
4ec70201 | 1605 | gdb_stop_suppressing_tests |
c906108c | 1606 | |
e11ac3a3 JK |
1607 | # Set the default value, it may be overriden later by specific testfile. |
1608 | # | |
1609 | # Use `set_board_info use_gdb_stub' for the board file to flag the inferior | |
1610 | # is already started after connecting and run/attach are not supported. | |
1611 | # This is used for the "remote" protocol. After GDB starts you should | |
1612 | # check global $use_gdb_stub instead of the board as the testfile may force | |
1613 | # a specific different target protocol itself. | |
1614 | set use_gdb_stub [target_info exists use_gdb_stub] | |
1615 | ||
6b8ce727 | 1616 | verbose "Spawning $GDB $INTERNAL_GDBFLAGS $GDBFLAGS" |
c906108c SS |
1617 | |
1618 | if [info exists gdb_spawn_id] { | |
ae59b1da | 1619 | return 0 |
c906108c SS |
1620 | } |
1621 | ||
1622 | if ![is_remote host] { | |
1623 | if { [which $GDB] == 0 } then { | |
1624 | perror "$GDB does not exist." | |
1625 | exit 1 | |
1626 | } | |
1627 | } | |
4ec70201 | 1628 | set res [remote_spawn host "$GDB $INTERNAL_GDBFLAGS $GDBFLAGS [host_info gdb_opts]"] |
c906108c SS |
1629 | if { $res < 0 || $res == "" } { |
1630 | perror "Spawning $GDB failed." | |
ae59b1da | 1631 | return 1 |
c906108c | 1632 | } |
717cf30c AG |
1633 | |
1634 | set gdb_spawn_id $res | |
94696ad3 PA |
1635 | return 0 |
1636 | } | |
1637 | ||
1638 | # Default gdb_start procedure. | |
1639 | ||
1640 | proc default_gdb_start { } { | |
e882ef3c | 1641 | global gdb_prompt pagination_prompt |
94696ad3 | 1642 | global gdb_spawn_id |
f71c18e7 | 1643 | global inferior_spawn_id |
94696ad3 PA |
1644 | |
1645 | if [info exists gdb_spawn_id] { | |
1646 | return 0 | |
1647 | } | |
1648 | ||
1649 | set res [gdb_spawn] | |
1650 | if { $res != 0} { | |
1651 | return $res | |
1652 | } | |
1653 | ||
f71c18e7 PA |
1654 | # Default to assuming inferior I/O is done on GDB's terminal. |
1655 | if {![info exists inferior_spawn_id]} { | |
1656 | set inferior_spawn_id $gdb_spawn_id | |
1657 | } | |
1658 | ||
94696ad3 PA |
1659 | # When running over NFS, particularly if running many simultaneous |
1660 | # tests on different hosts all using the same server, things can | |
1661 | # get really slow. Give gdb at least 3 minutes to start up. | |
e882ef3c SM |
1662 | set loop_again 1 |
1663 | while { $loop_again } { | |
1664 | set loop_again 0 | |
1665 | gdb_expect 360 { | |
1666 | -re "$pagination_prompt" { | |
1667 | verbose "Hit pagination during startup. Pressing enter to continue." | |
1668 | send_gdb "\n" | |
1669 | set loop_again 1 | |
1670 | } | |
1671 | -re "\[\r\n\]$gdb_prompt $" { | |
1672 | verbose "GDB initialized." | |
1673 | } | |
1674 | -re "$gdb_prompt $" { | |
1675 | perror "GDB never initialized." | |
1676 | unset gdb_spawn_id | |
1677 | return -1 | |
1678 | } | |
1679 | timeout { | |
1680 | perror "(timeout) GDB never initialized after 10 seconds." | |
1681 | remote_close host | |
1682 | unset gdb_spawn_id | |
1683 | return -1 | |
1684 | } | |
c906108c SS |
1685 | } |
1686 | } | |
94696ad3 | 1687 | |
c906108c SS |
1688 | # force the height to "unlimited", so no pagers get used |
1689 | ||
1690 | send_gdb "set height 0\n" | |
1691 | gdb_expect 10 { | |
1692 | -re "$gdb_prompt $" { | |
1693 | verbose "Setting height to 0." 2 | |
1694 | } | |
1695 | timeout { | |
1696 | warning "Couldn't set the height to 0" | |
1697 | } | |
1698 | } | |
1699 | # force the width to "unlimited", so no wraparound occurs | |
1700 | send_gdb "set width 0\n" | |
1701 | gdb_expect 10 { | |
1702 | -re "$gdb_prompt $" { | |
1703 | verbose "Setting width to 0." 2 | |
1704 | } | |
1705 | timeout { | |
1706 | warning "Couldn't set the width to 0." | |
1707 | } | |
1708 | } | |
ae59b1da | 1709 | return 0 |
c906108c SS |
1710 | } |
1711 | ||
717cf30c AG |
1712 | # Utility procedure to give user control of the gdb prompt in a script. It is |
1713 | # meant to be used for debugging test cases, and should not be left in the | |
1714 | # test cases code. | |
1715 | ||
1716 | proc gdb_interact { } { | |
1717 | global gdb_spawn_id | |
1718 | set spawn_id $gdb_spawn_id | |
1719 | ||
1720 | send_user "+------------------------------------------+\n" | |
1721 | send_user "| Script interrupted, you can now interact |\n" | |
1722 | send_user "| with by gdb. Type >>> to continue. |\n" | |
1723 | send_user "+------------------------------------------+\n" | |
1724 | ||
1725 | interact { | |
1726 | ">>>" return | |
1727 | } | |
1728 | } | |
1729 | ||
ec3c07fc NS |
1730 | # Examine the output of compilation to determine whether compilation |
1731 | # failed or not. If it failed determine whether it is due to missing | |
1732 | # compiler or due to compiler error. Report pass, fail or unsupported | |
1733 | # as appropriate | |
1734 | ||
1735 | proc gdb_compile_test {src output} { | |
1736 | if { $output == "" } { | |
1737 | pass "compilation [file tail $src]" | |
1738 | } elseif { [regexp {^[a-zA-Z_0-9]+: Can't find [^ ]+\.$} $output] } { | |
1739 | unsupported "compilation [file tail $src]" | |
1740 | } elseif { [regexp {.*: command not found[\r|\n]*$} $output] } { | |
1741 | unsupported "compilation [file tail $src]" | |
6bb85cd1 DE |
1742 | } elseif { [regexp {.*: [^\r\n]*compiler not installed[^\r\n]*[\r|\n]*$} $output] } { |
1743 | unsupported "compilation [file tail $src]" | |
ec3c07fc NS |
1744 | } else { |
1745 | verbose -log "compilation failed: $output" 2 | |
1746 | fail "compilation [file tail $src]" | |
1747 | } | |
1748 | } | |
1749 | ||
d4f3574e SS |
1750 | # Return a 1 for configurations for which we don't even want to try to |
1751 | # test C++. | |
1752 | ||
1753 | proc skip_cplus_tests {} { | |
d4f3574e SS |
1754 | if { [istarget "h8300-*-*"] } { |
1755 | return 1 | |
1756 | } | |
81d2cbae | 1757 | |
1146c7f1 SC |
1758 | # The C++ IO streams are too large for HC11/HC12 and are thus not |
1759 | # available. The gdb C++ tests use them and don't compile. | |
1760 | if { [istarget "m6811-*-*"] } { | |
1761 | return 1 | |
1762 | } | |
1763 | if { [istarget "m6812-*-*"] } { | |
1764 | return 1 | |
1765 | } | |
d4f3574e SS |
1766 | return 0 |
1767 | } | |
1768 | ||
759f0f0b PA |
1769 | # Return a 1 for configurations for which don't have both C++ and the STL. |
1770 | ||
1771 | proc skip_stl_tests {} { | |
1772 | # Symbian supports the C++ language, but the STL is missing | |
1773 | # (both headers and libraries). | |
1774 | if { [istarget "arm*-*-symbianelf*"] } { | |
1775 | return 1 | |
1776 | } | |
1777 | ||
1778 | return [skip_cplus_tests] | |
1779 | } | |
1780 | ||
89a237cb MC |
1781 | # Return a 1 if I don't even want to try to test FORTRAN. |
1782 | ||
1783 | proc skip_fortran_tests {} { | |
1784 | return 0 | |
1785 | } | |
1786 | ||
ec3c07fc NS |
1787 | # Return a 1 if I don't even want to try to test ada. |
1788 | ||
1789 | proc skip_ada_tests {} { | |
1790 | return 0 | |
1791 | } | |
1792 | ||
a766d390 DE |
1793 | # Return a 1 if I don't even want to try to test GO. |
1794 | ||
1795 | proc skip_go_tests {} { | |
1796 | return 0 | |
1797 | } | |
1798 | ||
7f420862 IB |
1799 | # Return a 1 if I don't even want to try to test D. |
1800 | ||
1801 | proc skip_d_tests {} { | |
1802 | return 0 | |
1803 | } | |
1804 | ||
67218854 TT |
1805 | # Return 1 to skip Rust tests, 0 to try them. |
1806 | proc skip_rust_tests {} { | |
1807 | return [expr {![isnative]}] | |
1808 | } | |
1809 | ||
f6bbabf0 | 1810 | # Return a 1 for configurations that do not support Python scripting. |
4d6cceb4 | 1811 | # PROMPT_REGEXP is the expected prompt. |
f6bbabf0 | 1812 | |
4d6cceb4 | 1813 | proc skip_python_tests_prompt { prompt_regexp } { |
9325cb04 PK |
1814 | global gdb_py_is_py3k |
1815 | global gdb_py_is_py24 | |
1816 | ||
1817 | gdb_test_multiple "python print ('test')" "verify python support" { | |
4d6cceb4 | 1818 | -re "not supported.*$prompt_regexp" { |
f6bbabf0 PM |
1819 | unsupported "Python support is disabled." |
1820 | return 1 | |
1821 | } | |
4d6cceb4 | 1822 | -re "$prompt_regexp" {} |
f6bbabf0 PM |
1823 | } |
1824 | ||
9325cb04 PK |
1825 | set gdb_py_is_py24 0 |
1826 | gdb_test_multiple "python print (sys.version_info\[0\])" "check if python 3" { | |
4d6cceb4 | 1827 | -re "3.*$prompt_regexp" { |
9325cb04 PK |
1828 | set gdb_py_is_py3k 1 |
1829 | } | |
4d6cceb4 | 1830 | -re ".*$prompt_regexp" { |
9325cb04 PK |
1831 | set gdb_py_is_py3k 0 |
1832 | } | |
1833 | } | |
1834 | if { $gdb_py_is_py3k == 0 } { | |
1835 | gdb_test_multiple "python print (sys.version_info\[1\])" "check if python 2.4" { | |
4d6cceb4 | 1836 | -re "\[45\].*$prompt_regexp" { |
9325cb04 PK |
1837 | set gdb_py_is_py24 1 |
1838 | } | |
4d6cceb4 | 1839 | -re ".*$prompt_regexp" { |
9325cb04 PK |
1840 | set gdb_py_is_py24 0 |
1841 | } | |
1842 | } | |
1843 | } | |
1844 | ||
f6bbabf0 PM |
1845 | return 0 |
1846 | } | |
1847 | ||
4d6cceb4 DE |
1848 | # Return a 1 for configurations that do not support Python scripting. |
1849 | # Note: This also sets various globals that specify which version of Python | |
1850 | # is in use. See skip_python_tests_prompt. | |
1851 | ||
1852 | proc skip_python_tests {} { | |
1853 | global gdb_prompt | |
1854 | return [skip_python_tests_prompt "$gdb_prompt $"] | |
1855 | } | |
1856 | ||
93f02886 DJ |
1857 | # Return a 1 if we should skip shared library tests. |
1858 | ||
1859 | proc skip_shlib_tests {} { | |
1860 | # Run the shared library tests on native systems. | |
1861 | if {[isnative]} { | |
1862 | return 0 | |
1863 | } | |
1864 | ||
1865 | # An abbreviated list of remote targets where we should be able to | |
1866 | # run shared library tests. | |
1867 | if {([istarget *-*-linux*] | |
1868 | || [istarget *-*-*bsd*] | |
1869 | || [istarget *-*-solaris2*] | |
1870 | || [istarget arm*-*-symbianelf*] | |
1871 | || [istarget *-*-mingw*] | |
1872 | || [istarget *-*-cygwin*] | |
1873 | || [istarget *-*-pe*])} { | |
1874 | return 0 | |
1875 | } | |
1876 | ||
1877 | return 1 | |
1878 | } | |
1879 | ||
ebe3b578 AB |
1880 | # Return 1 if we should skip tui related tests. |
1881 | ||
1882 | proc skip_tui_tests {} { | |
1883 | global gdb_prompt | |
1884 | ||
1885 | gdb_test_multiple "help layout" "verify tui support" { | |
1886 | -re "Undefined command: \"layout\".*$gdb_prompt $" { | |
1887 | return 1 | |
1888 | } | |
1889 | -re "$gdb_prompt $" { | |
1890 | } | |
1891 | } | |
1892 | ||
1893 | return 0 | |
1894 | } | |
1895 | ||
6a5870ce PA |
1896 | # Test files shall make sure all the test result lines in gdb.sum are |
1897 | # unique in a test run, so that comparing the gdb.sum files of two | |
1898 | # test runs gives correct results. Test files that exercise | |
1899 | # variations of the same tests more than once, shall prefix the | |
1900 | # different test invocations with different identifying strings in | |
1901 | # order to make them unique. | |
1902 | # | |
1903 | # About test prefixes: | |
1904 | # | |
1905 | # $pf_prefix is the string that dejagnu prints after the result (FAIL, | |
1906 | # PASS, etc.), and before the test message/name in gdb.sum. E.g., the | |
1907 | # underlined substring in | |
1908 | # | |
1909 | # PASS: gdb.base/mytest.exp: some test | |
1910 | # ^^^^^^^^^^^^^^^^^^^^ | |
1911 | # | |
1912 | # is $pf_prefix. | |
1913 | # | |
1914 | # The easiest way to adjust the test prefix is to append a test | |
1915 | # variation prefix to the $pf_prefix, using the with_test_prefix | |
1916 | # procedure. E.g., | |
1917 | # | |
1918 | # proc do_tests {} { | |
1919 | # gdb_test ... ... "test foo" | |
1920 | # gdb_test ... ... "test bar" | |
1921 | # | |
0f4d39d5 | 1922 | # with_test_prefix "subvariation a" { |
6a5870ce PA |
1923 | # gdb_test ... ... "test x" |
1924 | # } | |
1925 | # | |
0f4d39d5 | 1926 | # with_test_prefix "subvariation b" { |
6a5870ce PA |
1927 | # gdb_test ... ... "test x" |
1928 | # } | |
1929 | # } | |
1930 | # | |
0f4d39d5 | 1931 | # with_test_prefix "variation1" { |
6a5870ce PA |
1932 | # ...do setup for variation 1... |
1933 | # do_tests | |
1934 | # } | |
1935 | # | |
0f4d39d5 | 1936 | # with_test_prefix "variation2" { |
6a5870ce PA |
1937 | # ...do setup for variation 2... |
1938 | # do_tests | |
1939 | # } | |
1940 | # | |
1941 | # Results in: | |
1942 | # | |
1943 | # PASS: gdb.base/mytest.exp: variation1: test foo | |
1944 | # PASS: gdb.base/mytest.exp: variation1: test bar | |
1945 | # PASS: gdb.base/mytest.exp: variation1: subvariation a: test x | |
1946 | # PASS: gdb.base/mytest.exp: variation1: subvariation b: test x | |
1947 | # PASS: gdb.base/mytest.exp: variation2: test foo | |
1948 | # PASS: gdb.base/mytest.exp: variation2: test bar | |
1949 | # PASS: gdb.base/mytest.exp: variation2: subvariation a: test x | |
1950 | # PASS: gdb.base/mytest.exp: variation2: subvariation b: test x | |
1951 | # | |
1952 | # If for some reason more flexibility is necessary, one can also | |
1953 | # manipulate the pf_prefix global directly, treating it as a string. | |
1954 | # E.g., | |
1955 | # | |
1956 | # global pf_prefix | |
1957 | # set saved_pf_prefix | |
0f4d39d5 | 1958 | # append pf_prefix "${foo}: bar" |
6a5870ce PA |
1959 | # ... actual tests ... |
1960 | # set pf_prefix $saved_pf_prefix | |
1961 | # | |
1962 | ||
1963 | # Run BODY in the context of the caller, with the current test prefix | |
0f4d39d5 PA |
1964 | # (pf_prefix) appended with one space, then PREFIX, and then a colon. |
1965 | # Returns the result of BODY. | |
6a5870ce PA |
1966 | # |
1967 | proc with_test_prefix { prefix body } { | |
1968 | global pf_prefix | |
1969 | ||
1970 | set saved $pf_prefix | |
0f4d39d5 | 1971 | append pf_prefix " " $prefix ":" |
6a5870ce PA |
1972 | set code [catch {uplevel 1 $body} result] |
1973 | set pf_prefix $saved | |
1974 | ||
1975 | if {$code == 1} { | |
1976 | global errorInfo errorCode | |
1977 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result | |
1978 | } else { | |
1979 | return -code $code $result | |
1980 | } | |
1981 | } | |
1982 | ||
f1da4b11 PA |
1983 | # Wrapper for foreach that calls with_test_prefix on each iteration, |
1984 | # including the iterator's name and current value in the prefix. | |
1985 | ||
1986 | proc foreach_with_prefix {var list body} { | |
1987 | upvar 1 $var myvar | |
1988 | foreach myvar $list { | |
1989 | with_test_prefix "$var=$myvar" { | |
1990 | uplevel 1 $body | |
1991 | } | |
1992 | } | |
1993 | } | |
1994 | ||
64f367a2 PA |
1995 | # Like TCL's native proc, but defines a procedure that wraps its body |
1996 | # within 'with_test_prefix "$proc_name" { ... }'. | |
1997 | proc proc_with_prefix {name arguments body} { | |
1998 | # Define the advertised proc. | |
1999 | proc $name $arguments [list with_test_prefix $name $body] | |
2000 | } | |
2001 | ||
2002 | ||
abe8e607 PP |
2003 | # Run BODY in the context of the caller. After BODY is run, the variables |
2004 | # listed in VARS will be reset to the values they had before BODY was run. | |
2005 | # | |
2006 | # This is useful for providing a scope in which it is safe to temporarily | |
2007 | # modify global variables, e.g. | |
2008 | # | |
2009 | # global INTERNAL_GDBFLAGS | |
2010 | # global env | |
2011 | # | |
2012 | # set foo GDBHISTSIZE | |
2013 | # | |
2014 | # save_vars { INTERNAL_GDBFLAGS env($foo) env(HOME) } { | |
2015 | # append INTERNAL_GDBFLAGS " -nx" | |
2016 | # unset -nocomplain env(GDBHISTSIZE) | |
2017 | # gdb_start | |
2018 | # gdb_test ... | |
2019 | # } | |
2020 | # | |
2021 | # Here, although INTERNAL_GDBFLAGS, env(GDBHISTSIZE) and env(HOME) may be | |
2022 | # modified inside BODY, this proc guarantees that the modifications will be | |
2023 | # undone after BODY finishes executing. | |
2024 | ||
2025 | proc save_vars { vars body } { | |
2026 | array set saved_scalars { } | |
2027 | array set saved_arrays { } | |
2028 | set unset_vars { } | |
2029 | ||
2030 | foreach var $vars { | |
2031 | # First evaluate VAR in the context of the caller in case the variable | |
2032 | # name may be a not-yet-interpolated string like env($foo) | |
2033 | set var [uplevel 1 list $var] | |
2034 | ||
2035 | if [uplevel 1 [list info exists $var]] { | |
2036 | if [uplevel 1 [list array exists $var]] { | |
2037 | set saved_arrays($var) [uplevel 1 [list array get $var]] | |
2038 | } else { | |
2039 | set saved_scalars($var) [uplevel 1 [list set $var]] | |
2040 | } | |
2041 | } else { | |
2042 | lappend unset_vars $var | |
2043 | } | |
2044 | } | |
2045 | ||
2046 | set code [catch {uplevel 1 $body} result] | |
2047 | ||
2048 | foreach {var value} [array get saved_scalars] { | |
2049 | uplevel 1 [list set $var $value] | |
2050 | } | |
2051 | ||
2052 | foreach {var value} [array get saved_arrays] { | |
2053 | uplevel 1 [list unset $var] | |
2054 | uplevel 1 [list array set $var $value] | |
2055 | } | |
2056 | ||
2057 | foreach var $unset_vars { | |
2058 | uplevel 1 [list unset -nocomplain $var] | |
2059 | } | |
2060 | ||
2061 | if {$code == 1} { | |
2062 | global errorInfo errorCode | |
2063 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result | |
2064 | } else { | |
2065 | return -code $code $result | |
2066 | } | |
2067 | } | |
2068 | ||
25e3c82c SDJ |
2069 | # Run tests in BODY with the current working directory (CWD) set to |
2070 | # DIR. When BODY is finished, restore the original CWD. Return the | |
2071 | # result of BODY. | |
2072 | # | |
2073 | # This procedure doesn't check if DIR is a valid directory, so you | |
2074 | # have to make sure of that. | |
2075 | ||
2076 | proc with_cwd { dir body } { | |
2077 | set saved_dir [pwd] | |
2078 | verbose -log "Switching to directory $dir (saved CWD: $saved_dir)." | |
2079 | cd $dir | |
2080 | ||
2081 | set code [catch {uplevel 1 $body} result] | |
2082 | ||
2083 | verbose -log "Switching back to $saved_dir." | |
2084 | cd $saved_dir | |
2085 | ||
2086 | if {$code == 1} { | |
2087 | global errorInfo errorCode | |
2088 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result | |
2089 | } else { | |
2090 | return -code $code $result | |
2091 | } | |
2092 | } | |
abe8e607 | 2093 | |
8b5e6dc2 YQ |
2094 | # Run tests in BODY with GDB prompt and variable $gdb_prompt set to |
2095 | # PROMPT. When BODY is finished, restore GDB prompt and variable | |
2096 | # $gdb_prompt. | |
2097 | # Returns the result of BODY. | |
3714cea7 DE |
2098 | # |
2099 | # Notes: | |
2100 | # | |
2101 | # 1) If you want to use, for example, "(foo)" as the prompt you must pass it | |
2102 | # as "(foo)", and not the regexp form "\(foo\)" (expressed as "\\(foo\\)" in | |
2103 | # TCL). PROMPT is internally converted to a suitable regexp for matching. | |
2104 | # We do the conversion from "(foo)" to "\(foo\)" here for a few reasons: | |
2105 | # a) It's more intuitive for callers to pass the plain text form. | |
2106 | # b) We need two forms of the prompt: | |
2107 | # - a regexp to use in output matching, | |
2108 | # - a value to pass to the "set prompt" command. | |
2109 | # c) It's easier to convert the plain text form to its regexp form. | |
2110 | # | |
2111 | # 2) Don't add a trailing space, we do that here. | |
8b5e6dc2 YQ |
2112 | |
2113 | proc with_gdb_prompt { prompt body } { | |
2114 | global gdb_prompt | |
2115 | ||
3714cea7 DE |
2116 | # Convert "(foo)" to "\(foo\)". |
2117 | # We don't use string_to_regexp because while it works today it's not | |
2118 | # clear it will work tomorrow: the value we need must work as both a | |
2119 | # regexp *and* as the argument to the "set prompt" command, at least until | |
2120 | # we start recording both forms separately instead of just $gdb_prompt. | |
2121 | # The testsuite is pretty-much hardwired to interpret $gdb_prompt as the | |
2122 | # regexp form. | |
2123 | regsub -all {[]*+.|()^$\[\\]} $prompt {\\&} prompt | |
2124 | ||
8b5e6dc2 YQ |
2125 | set saved $gdb_prompt |
2126 | ||
3714cea7 | 2127 | verbose -log "Setting gdb prompt to \"$prompt \"." |
8b5e6dc2 YQ |
2128 | set gdb_prompt $prompt |
2129 | gdb_test_no_output "set prompt $prompt " "" | |
2130 | ||
2131 | set code [catch {uplevel 1 $body} result] | |
2132 | ||
3714cea7 | 2133 | verbose -log "Restoring gdb prompt to \"$saved \"." |
8b5e6dc2 YQ |
2134 | set gdb_prompt $saved |
2135 | gdb_test_no_output "set prompt $saved " "" | |
2136 | ||
2137 | if {$code == 1} { | |
2138 | global errorInfo errorCode | |
2139 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result | |
2140 | } else { | |
2141 | return -code $code $result | |
2142 | } | |
2143 | } | |
2144 | ||
389b98f7 YQ |
2145 | # Run tests in BODY with target-charset setting to TARGET_CHARSET. When |
2146 | # BODY is finished, restore target-charset. | |
2147 | ||
2148 | proc with_target_charset { target_charset body } { | |
2149 | global gdb_prompt | |
2150 | ||
2151 | set saved "" | |
2152 | gdb_test_multiple "show target-charset" "" { | |
2153 | -re "The target character set is \".*; currently (.*)\"\..*$gdb_prompt " { | |
2154 | set saved $expect_out(1,string) | |
2155 | } | |
2156 | -re "The target character set is \"(.*)\".*$gdb_prompt " { | |
2157 | set saved $expect_out(1,string) | |
2158 | } | |
2159 | -re ".*$gdb_prompt " { | |
2160 | fail "get target-charset" | |
2161 | } | |
2162 | } | |
2163 | ||
2164 | gdb_test_no_output "set target-charset $target_charset" "" | |
2165 | ||
2166 | set code [catch {uplevel 1 $body} result] | |
2167 | ||
2168 | gdb_test_no_output "set target-charset $saved" "" | |
2169 | ||
2170 | if {$code == 1} { | |
2171 | global errorInfo errorCode | |
2172 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result | |
2173 | } else { | |
2174 | return -code $code $result | |
2175 | } | |
2176 | } | |
2177 | ||
ac69f786 PA |
2178 | # Switch the default spawn id to SPAWN_ID, so that gdb_test, |
2179 | # mi_gdb_test etc. default to using it. | |
2180 | ||
2181 | proc switch_gdb_spawn_id {spawn_id} { | |
2182 | global gdb_spawn_id | |
2183 | global board board_info | |
2184 | ||
2185 | set gdb_spawn_id $spawn_id | |
2186 | set board [host_info name] | |
2187 | set board_info($board,fileid) $spawn_id | |
2188 | } | |
2189 | ||
4295e285 PA |
2190 | # Clear the default spawn id. |
2191 | ||
2192 | proc clear_gdb_spawn_id {} { | |
2193 | global gdb_spawn_id | |
2194 | global board board_info | |
2195 | ||
2196 | unset -nocomplain gdb_spawn_id | |
2197 | set board [host_info name] | |
2198 | unset -nocomplain board_info($board,fileid) | |
2199 | } | |
2200 | ||
ac69f786 PA |
2201 | # Run BODY with SPAWN_ID as current spawn id. |
2202 | ||
2203 | proc with_spawn_id { spawn_id body } { | |
2204 | global gdb_spawn_id | |
2205 | ||
4295e285 PA |
2206 | if [info exists gdb_spawn_id] { |
2207 | set saved_spawn_id $gdb_spawn_id | |
2208 | } | |
2209 | ||
ac69f786 PA |
2210 | switch_gdb_spawn_id $spawn_id |
2211 | ||
2212 | set code [catch {uplevel 1 $body} result] | |
2213 | ||
4295e285 PA |
2214 | if [info exists saved_spawn_id] { |
2215 | switch_gdb_spawn_id $saved_spawn_id | |
2216 | } else { | |
2217 | clear_gdb_spawn_id | |
2218 | } | |
ac69f786 PA |
2219 | |
2220 | if {$code == 1} { | |
2221 | global errorInfo errorCode | |
2222 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result | |
2223 | } else { | |
2224 | return -code $code $result | |
2225 | } | |
2226 | } | |
2227 | ||
45fd756c YQ |
2228 | # Select the largest timeout from all the timeouts: |
2229 | # - the local "timeout" variable of the scope two levels above, | |
2230 | # - the global "timeout" variable, | |
2231 | # - the board variable "gdb,timeout". | |
2232 | ||
2233 | proc get_largest_timeout {} { | |
2234 | upvar #0 timeout gtimeout | |
2235 | upvar 2 timeout timeout | |
2236 | ||
2237 | set tmt 0 | |
2238 | if [info exists timeout] { | |
2239 | set tmt $timeout | |
2240 | } | |
2241 | if { [info exists gtimeout] && $gtimeout > $tmt } { | |
2242 | set tmt $gtimeout | |
2243 | } | |
2244 | if { [target_info exists gdb,timeout] | |
2245 | && [target_info gdb,timeout] > $tmt } { | |
2246 | set tmt [target_info gdb,timeout] | |
2247 | } | |
2248 | if { $tmt == 0 } { | |
2249 | # Eeeeew. | |
2250 | set tmt 60 | |
2251 | } | |
2252 | ||
2253 | return $tmt | |
2254 | } | |
2255 | ||
2256 | # Run tests in BODY with timeout increased by factor of FACTOR. When | |
2257 | # BODY is finished, restore timeout. | |
2258 | ||
2259 | proc with_timeout_factor { factor body } { | |
2260 | global timeout | |
2261 | ||
2262 | set savedtimeout $timeout | |
2263 | ||
2264 | set timeout [expr [get_largest_timeout] * $factor] | |
2265 | set code [catch {uplevel 1 $body} result] | |
2266 | ||
2267 | set timeout $savedtimeout | |
2268 | if {$code == 1} { | |
2269 | global errorInfo errorCode | |
2270 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result | |
2271 | } else { | |
2272 | return -code $code $result | |
2273 | } | |
2274 | } | |
2275 | ||
e43ec454 YQ |
2276 | # Return 1 if _Complex types are supported, otherwise, return 0. |
2277 | ||
17e1c970 | 2278 | gdb_caching_proc support_complex_tests { |
fdebf1a4 YQ |
2279 | |
2280 | if { [gdb_skip_float_test] } { | |
2281 | # If floating point is not supported, _Complex is not | |
2282 | # supported. | |
2283 | return 0 | |
2284 | } | |
2285 | ||
c221b2f7 | 2286 | # Compile a test program containing _Complex types. |
e43ec454 | 2287 | |
c221b2f7 | 2288 | return [gdb_can_simple_compile complex { |
11ec5965 YQ |
2289 | int main() { |
2290 | _Complex float cf; | |
2291 | _Complex double cd; | |
2292 | _Complex long double cld; | |
2293 | return 0; | |
2294 | } | |
c221b2f7 | 2295 | } executable] |
e43ec454 YQ |
2296 | } |
2297 | ||
4d7be007 YQ |
2298 | # Return 1 if GDB can get a type for siginfo from the target, otherwise |
2299 | # return 0. | |
2300 | ||
2301 | proc supports_get_siginfo_type {} { | |
5cd867b4 | 2302 | if { [istarget "*-*-linux*"] } { |
4d7be007 YQ |
2303 | return 1 |
2304 | } else { | |
2305 | return 0 | |
2306 | } | |
2307 | } | |
2308 | ||
1ed415e2 | 2309 | # Return 1 if the target supports hardware single stepping. |
ab254057 | 2310 | |
1ed415e2 | 2311 | proc can_hardware_single_step {} { |
ab254057 | 2312 | |
b0221781 | 2313 | if { [istarget "arm*-*-*"] || [istarget "mips*-*-*"] |
b5bee914 YQ |
2314 | || [istarget "tic6x-*-*"] || [istarget "sparc*-*-linux*"] |
2315 | || [istarget "nios2-*-*"] } { | |
ab254057 YQ |
2316 | return 0 |
2317 | } | |
2318 | ||
2319 | return 1 | |
2320 | } | |
2321 | ||
1ed415e2 PA |
2322 | # Return 1 if target hardware or OS supports single stepping to signal |
2323 | # handler, otherwise, return 0. | |
2324 | ||
2325 | proc can_single_step_to_signal_handler {} { | |
2326 | # Targets don't have hardware single step. On these targets, when | |
2327 | # a signal is delivered during software single step, gdb is unable | |
2328 | # to determine the next instruction addresses, because start of signal | |
2329 | # handler is one of them. | |
2330 | return [can_hardware_single_step] | |
2331 | } | |
2332 | ||
d3895d7d YQ |
2333 | # Return 1 if target supports process record, otherwise return 0. |
2334 | ||
2335 | proc supports_process_record {} { | |
2336 | ||
2337 | if [target_info exists gdb,use_precord] { | |
2338 | return [target_info gdb,use_precord] | |
2339 | } | |
2340 | ||
596662fa | 2341 | if { [istarget "arm*-*-linux*"] || [istarget "x86_64-*-linux*"] |
b4cdae6f | 2342 | || [istarget "i\[34567\]86-*-linux*"] |
a81bfbd0 | 2343 | || [istarget "aarch64*-*-linux*"] |
566c56c9 MK |
2344 | || [istarget "powerpc*-*-linux*"] |
2345 | || [istarget "s390*-*-linux*"] } { | |
d3895d7d YQ |
2346 | return 1 |
2347 | } | |
2348 | ||
2349 | return 0 | |
2350 | } | |
2351 | ||
2352 | # Return 1 if target supports reverse debugging, otherwise return 0. | |
2353 | ||
2354 | proc supports_reverse {} { | |
2355 | ||
2356 | if [target_info exists gdb,can_reverse] { | |
2357 | return [target_info gdb,can_reverse] | |
2358 | } | |
2359 | ||
596662fa | 2360 | if { [istarget "arm*-*-linux*"] || [istarget "x86_64-*-linux*"] |
b4cdae6f | 2361 | || [istarget "i\[34567\]86-*-linux*"] |
a81bfbd0 | 2362 | || [istarget "aarch64*-*-linux*"] |
566c56c9 MK |
2363 | || [istarget "powerpc*-*-linux*"] |
2364 | || [istarget "s390*-*-linux*"] } { | |
d3895d7d YQ |
2365 | return 1 |
2366 | } | |
2367 | ||
2368 | return 0 | |
2369 | } | |
2370 | ||
0d4d0e77 YQ |
2371 | # Return 1 if readline library is used. |
2372 | ||
2373 | proc readline_is_used { } { | |
2374 | global gdb_prompt | |
2375 | ||
2376 | gdb_test_multiple "show editing" "" { | |
2377 | -re ".*Editing of command lines as they are typed is on\..*$gdb_prompt $" { | |
2378 | return 1 | |
2379 | } | |
2380 | -re ".*$gdb_prompt $" { | |
2381 | return 0 | |
2382 | } | |
2383 | } | |
2384 | } | |
2385 | ||
e9f0e62e NB |
2386 | # Return 1 if target is ELF. |
2387 | gdb_caching_proc is_elf_target { | |
2388 | set me "is_elf_target" | |
2389 | ||
bf326452 AH |
2390 | set src { int foo () {return 0;} } |
2391 | if {![gdb_simple_compile elf_target $src]} { | |
2392 | return 0 | |
e9f0e62e NB |
2393 | } |
2394 | ||
2395 | set fp_obj [open $obj "r"] | |
2396 | fconfigure $fp_obj -translation binary | |
2397 | set data [read $fp_obj] | |
2398 | close $fp_obj | |
2399 | ||
2400 | file delete $obj | |
2401 | ||
2402 | set ELFMAG "\u007FELF" | |
2403 | ||
2404 | if {[string compare -length 4 $data $ELFMAG] != 0} { | |
2405 | verbose "$me: returning 0" 2 | |
2406 | return 0 | |
2407 | } | |
2408 | ||
2409 | verbose "$me: returning 1" 2 | |
2410 | return 1 | |
2411 | } | |
2412 | ||
20c6f1e1 YQ |
2413 | # Return 1 if the memory at address zero is readable. |
2414 | ||
2415 | gdb_caching_proc is_address_zero_readable { | |
2416 | global gdb_prompt | |
2417 | ||
2418 | set ret 0 | |
2419 | gdb_test_multiple "x 0" "" { | |
2420 | -re "Cannot access memory at address 0x0.*$gdb_prompt $" { | |
2421 | set ret 0 | |
2422 | } | |
2423 | -re ".*$gdb_prompt $" { | |
2424 | set ret 1 | |
2425 | } | |
2426 | } | |
2427 | ||
2428 | return $ret | |
2429 | } | |
2430 | ||
6dbb6798 YQ |
2431 | # Produce source file NAME and write SOURCES into it. |
2432 | ||
2433 | proc gdb_produce_source { name sources } { | |
2434 | set index 0 | |
2435 | set f [open $name "w"] | |
2436 | ||
2437 | puts $f $sources | |
2438 | close $f | |
2439 | } | |
2440 | ||
add265ae L |
2441 | # Return 1 if target is ILP32. |
2442 | # This cannot be decided simply from looking at the target string, | |
2443 | # as it might depend on externally passed compiler options like -m64. | |
17e1c970 | 2444 | gdb_caching_proc is_ilp32_target { |
c221b2f7 | 2445 | return [gdb_can_simple_compile is_ilp32_target { |
11ec5965 YQ |
2446 | int dummy[sizeof (int) == 4 |
2447 | && sizeof (void *) == 4 | |
2448 | && sizeof (long) == 4 ? 1 : -1]; | |
c221b2f7 | 2449 | }] |
add265ae L |
2450 | } |
2451 | ||
2452 | # Return 1 if target is LP64. | |
2453 | # This cannot be decided simply from looking at the target string, | |
2454 | # as it might depend on externally passed compiler options like -m64. | |
17e1c970 | 2455 | gdb_caching_proc is_lp64_target { |
c221b2f7 | 2456 | return [gdb_can_simple_compile is_lp64_target { |
11ec5965 YQ |
2457 | int dummy[sizeof (int) == 4 |
2458 | && sizeof (void *) == 8 | |
2459 | && sizeof (long) == 8 ? 1 : -1]; | |
c221b2f7 | 2460 | }] |
add265ae L |
2461 | } |
2462 | ||
e630b974 TT |
2463 | # Return 1 if target has 64 bit addresses. |
2464 | # This cannot be decided simply from looking at the target string, | |
2465 | # as it might depend on externally passed compiler options like -m64. | |
2466 | gdb_caching_proc is_64_target { | |
c221b2f7 | 2467 | return [gdb_can_simple_compile is_64_target { |
11ec5965 YQ |
2468 | int function(void) { return 3; } |
2469 | int dummy[sizeof (&function) == 8 ? 1 : -1]; | |
c221b2f7 | 2470 | }] |
e630b974 TT |
2471 | } |
2472 | ||
7f062217 JK |
2473 | # Return 1 if target has x86_64 registers - either amd64 or x32. |
2474 | # x32 target identifies as x86_64-*-linux*, therefore it cannot be determined | |
2475 | # just from the target string. | |
17e1c970 | 2476 | gdb_caching_proc is_amd64_regs_target { |
68fb0ec0 | 2477 | if {![istarget "x86_64-*-*"] && ![istarget "i?86-*"]} { |
7f062217 JK |
2478 | return 0 |
2479 | } | |
2480 | ||
224d30d3 MM |
2481 | return [gdb_can_simple_compile is_amd64_regs_target { |
2482 | int main (void) { | |
2483 | asm ("incq %rax"); | |
2484 | asm ("incq %r15"); | |
7f062217 | 2485 | |
224d30d3 MM |
2486 | return 0; |
2487 | } | |
2488 | }] | |
7f062217 JK |
2489 | } |
2490 | ||
6edba76f TT |
2491 | # Return 1 if this target is an x86 or x86-64 with -m32. |
2492 | proc is_x86_like_target {} { | |
68fb0ec0 | 2493 | if {![istarget "x86_64-*-*"] && ![istarget i?86-*]} { |
6edba76f TT |
2494 | return 0 |
2495 | } | |
7f062217 | 2496 | return [expr [is_ilp32_target] && ![is_amd64_regs_target]] |
6edba76f TT |
2497 | } |
2498 | ||
9fcf688e YQ |
2499 | # Return 1 if this target is an arm or aarch32 on aarch64. |
2500 | ||
2501 | gdb_caching_proc is_aarch32_target { | |
2502 | if { [istarget "arm*-*-*"] } { | |
2503 | return 1 | |
2504 | } | |
2505 | ||
2506 | if { ![istarget "aarch64*-*-*"] } { | |
2507 | return 0 | |
2508 | } | |
2509 | ||
9fcf688e YQ |
2510 | set list {} |
2511 | foreach reg \ | |
2512 | {r0 r1 r2 r3} { | |
2513 | lappend list "\tmov $reg, $reg" | |
2514 | } | |
9fcf688e | 2515 | |
c221b2f7 | 2516 | return [gdb_can_simple_compile aarch32 [join $list \n]] |
9fcf688e YQ |
2517 | } |
2518 | ||
4931af25 YQ |
2519 | # Return 1 if this target is an aarch64, either lp64 or ilp32. |
2520 | ||
2521 | proc is_aarch64_target {} { | |
2522 | if { ![istarget "aarch64*-*-*"] } { | |
2523 | return 0 | |
2524 | } | |
2525 | ||
2526 | return [expr ![is_aarch32_target]] | |
2527 | } | |
2528 | ||
be777e08 YQ |
2529 | # Return 1 if displaced stepping is supported on target, otherwise, return 0. |
2530 | proc support_displaced_stepping {} { | |
2531 | ||
2532 | if { [istarget "x86_64-*-linux*"] || [istarget "i\[34567\]86-*-linux*"] | |
2533 | || [istarget "arm*-*-linux*"] || [istarget "powerpc-*-linux*"] | |
34240514 YQ |
2534 | || [istarget "powerpc64-*-linux*"] || [istarget "s390*-*-*"] |
2535 | || [istarget "aarch64*-*-linux*"] } { | |
be777e08 YQ |
2536 | return 1 |
2537 | } | |
2538 | ||
2539 | return 0 | |
2540 | } | |
2541 | ||
3c95e6af PG |
2542 | # Run a test on the target to see if it supports vmx hardware. Return 0 if so, |
2543 | # 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite. | |
2544 | ||
17e1c970 | 2545 | gdb_caching_proc skip_altivec_tests { |
fda326dd | 2546 | global srcdir subdir gdb_prompt inferior_exited_re |
3c95e6af | 2547 | |
3c95e6af | 2548 | set me "skip_altivec_tests" |
3c95e6af PG |
2549 | |
2550 | # Some simulators are known to not support VMX instructions. | |
2551 | if { [istarget powerpc-*-eabi] || [istarget powerpc*-*-eabispe] } { | |
2552 | verbose "$me: target known to not support VMX, returning 1" 2 | |
17e1c970 | 2553 | return 1 |
3c95e6af PG |
2554 | } |
2555 | ||
2556 | # Make sure we have a compiler that understands altivec. | |
4c93b1db | 2557 | if [get_compiler_info] { |
3c95e6af PG |
2558 | warning "Could not get compiler info" |
2559 | return 1 | |
2560 | } | |
2561 | if [test_compiler_info gcc*] { | |
bf326452 | 2562 | set compile_flags "additional_flags=-maltivec" |
3c95e6af | 2563 | } elseif [test_compiler_info xlc*] { |
bf326452 | 2564 | set compile_flags "additional_flags=-qaltivec" |
3c95e6af PG |
2565 | } else { |
2566 | verbose "Could not compile with altivec support, returning 1" 2 | |
2567 | return 1 | |
2568 | } | |
2569 | ||
bf326452 AH |
2570 | # Compile a test program containing VMX instructions. |
2571 | set src { | |
11ec5965 YQ |
2572 | int main() { |
2573 | #ifdef __MACH__ | |
2574 | asm volatile ("vor v0,v0,v0"); | |
2575 | #else | |
2576 | asm volatile ("vor 0,0,0"); | |
2577 | #endif | |
2578 | return 0; | |
2579 | } | |
2580 | } | |
bf326452 | 2581 | if {![gdb_simple_compile $me $src executable $compile_flags]} { |
17e1c970 | 2582 | return 1 |
3c95e6af PG |
2583 | } |
2584 | ||
bf326452 | 2585 | # Compilation succeeded so now run it via gdb. |
3c95e6af PG |
2586 | |
2587 | gdb_exit | |
2588 | gdb_start | |
2589 | gdb_reinitialize_dir $srcdir/$subdir | |
bf326452 | 2590 | gdb_load "$obj" |
3c95e6af PG |
2591 | gdb_run_cmd |
2592 | gdb_expect { | |
2593 | -re ".*Illegal instruction.*${gdb_prompt} $" { | |
2594 | verbose -log "\n$me altivec hardware not detected" | |
17e1c970 | 2595 | set skip_vmx_tests 1 |
3c95e6af | 2596 | } |
fda326dd | 2597 | -re ".*$inferior_exited_re normally.*${gdb_prompt} $" { |
3c95e6af | 2598 | verbose -log "\n$me: altivec hardware detected" |
17e1c970 | 2599 | set skip_vmx_tests 0 |
3c95e6af PG |
2600 | } |
2601 | default { | |
2602 | warning "\n$me: default case taken" | |
17e1c970 | 2603 | set skip_vmx_tests 1 |
3c95e6af PG |
2604 | } |
2605 | } | |
2606 | gdb_exit | |
bf326452 | 2607 | remote_file build delete $obj |
3c95e6af | 2608 | |
17e1c970 TT |
2609 | verbose "$me: returning $skip_vmx_tests" 2 |
2610 | return $skip_vmx_tests | |
3c95e6af PG |
2611 | } |
2612 | ||
604c2f83 LM |
2613 | # Run a test on the target to see if it supports vmx hardware. Return 0 if so, |
2614 | # 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite. | |
2615 | ||
17e1c970 | 2616 | gdb_caching_proc skip_vsx_tests { |
fda326dd | 2617 | global srcdir subdir gdb_prompt inferior_exited_re |
604c2f83 | 2618 | |
604c2f83 | 2619 | set me "skip_vsx_tests" |
604c2f83 LM |
2620 | |
2621 | # Some simulators are known to not support Altivec instructions, so | |
2622 | # they won't support VSX instructions as well. | |
2623 | if { [istarget powerpc-*-eabi] || [istarget powerpc*-*-eabispe] } { | |
2624 | verbose "$me: target known to not support VSX, returning 1" 2 | |
17e1c970 | 2625 | return 1 |
604c2f83 LM |
2626 | } |
2627 | ||
2628 | # Make sure we have a compiler that understands altivec. | |
4c93b1db | 2629 | if [get_compiler_info] { |
604c2f83 LM |
2630 | warning "Could not get compiler info" |
2631 | return 1 | |
2632 | } | |
2633 | if [test_compiler_info gcc*] { | |
bf326452 | 2634 | set compile_flags "additional_flags=-mvsx" |
604c2f83 | 2635 | } elseif [test_compiler_info xlc*] { |
bf326452 | 2636 | set compile_flags "additional_flags=-qasm=gcc" |
604c2f83 LM |
2637 | } else { |
2638 | verbose "Could not compile with vsx support, returning 1" 2 | |
2639 | return 1 | |
2640 | } | |
2641 | ||
bf326452 AH |
2642 | # Compile a test program containing VSX instructions. |
2643 | set src { | |
11ec5965 YQ |
2644 | int main() { |
2645 | double a[2] = { 1.0, 2.0 }; | |
2646 | #ifdef __MACH__ | |
2647 | asm volatile ("lxvd2x v0,v0,%[addr]" : : [addr] "r" (a)); | |
2648 | #else | |
2649 | asm volatile ("lxvd2x 0,0,%[addr]" : : [addr] "r" (a)); | |
2650 | #endif | |
2651 | return 0; | |
2652 | } | |
2653 | } | |
bf326452 | 2654 | if {![gdb_simple_compile $me $src executable $compile_flags]} { |
17e1c970 | 2655 | return 1 |
604c2f83 LM |
2656 | } |
2657 | ||
2658 | # No error message, compilation succeeded so now run it via gdb. | |
2659 | ||
2660 | gdb_exit | |
2661 | gdb_start | |
2662 | gdb_reinitialize_dir $srcdir/$subdir | |
bf326452 | 2663 | gdb_load "$obj" |
604c2f83 LM |
2664 | gdb_run_cmd |
2665 | gdb_expect { | |
2666 | -re ".*Illegal instruction.*${gdb_prompt} $" { | |
2667 | verbose -log "\n$me VSX hardware not detected" | |
17e1c970 | 2668 | set skip_vsx_tests 1 |
604c2f83 | 2669 | } |
fda326dd | 2670 | -re ".*$inferior_exited_re normally.*${gdb_prompt} $" { |
604c2f83 | 2671 | verbose -log "\n$me: VSX hardware detected" |
17e1c970 | 2672 | set skip_vsx_tests 0 |
604c2f83 LM |
2673 | } |
2674 | default { | |
2675 | warning "\n$me: default case taken" | |
17e1c970 | 2676 | set skip_vsx_tests 1 |
604c2f83 LM |
2677 | } |
2678 | } | |
2679 | gdb_exit | |
bf326452 | 2680 | remote_file build delete $obj |
604c2f83 | 2681 | |
17e1c970 TT |
2682 | verbose "$me: returning $skip_vsx_tests" 2 |
2683 | return $skip_vsx_tests | |
604c2f83 LM |
2684 | } |
2685 | ||
da8c46d2 MM |
2686 | # Run a test on the target to see if it supports TSX hardware. Return 0 if so, |
2687 | # 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite. | |
2688 | ||
2689 | gdb_caching_proc skip_tsx_tests { | |
2690 | global srcdir subdir gdb_prompt inferior_exited_re | |
2691 | ||
2692 | set me "skip_tsx_tests" | |
2693 | ||
bf326452 AH |
2694 | # Compile a test program. |
2695 | set src { | |
2696 | int main() { | |
2697 | asm volatile ("xbegin .L0"); | |
2698 | asm volatile ("xend"); | |
2699 | asm volatile (".L0: nop"); | |
2700 | return 0; | |
2701 | } | |
da8c46d2 | 2702 | } |
bf326452 | 2703 | if {![gdb_simple_compile $me $src executable]} { |
da8c46d2 MM |
2704 | return 1 |
2705 | } | |
2706 | ||
2707 | # No error message, compilation succeeded so now run it via gdb. | |
2708 | ||
2709 | gdb_exit | |
2710 | gdb_start | |
2711 | gdb_reinitialize_dir $srcdir/$subdir | |
bf326452 | 2712 | gdb_load "$obj" |
da8c46d2 MM |
2713 | gdb_run_cmd |
2714 | gdb_expect { | |
2715 | -re ".*Illegal instruction.*${gdb_prompt} $" { | |
2716 | verbose -log "$me: TSX hardware not detected." | |
2717 | set skip_tsx_tests 1 | |
2718 | } | |
2719 | -re ".*$inferior_exited_re normally.*${gdb_prompt} $" { | |
2720 | verbose -log "$me: TSX hardware detected." | |
2721 | set skip_tsx_tests 0 | |
2722 | } | |
2723 | default { | |
2724 | warning "\n$me: default case taken." | |
2725 | set skip_tsx_tests 1 | |
2726 | } | |
2727 | } | |
2728 | gdb_exit | |
bf326452 | 2729 | remote_file build delete $obj |
da8c46d2 MM |
2730 | |
2731 | verbose "$me: returning $skip_tsx_tests" 2 | |
2732 | return $skip_tsx_tests | |
2733 | } | |
2734 | ||
2f1d9bdd MM |
2735 | # Run a test on the target to see if it supports btrace hardware. Return 0 if so, |
2736 | # 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite. | |
2737 | ||
f3a76454 | 2738 | gdb_caching_proc skip_btrace_tests { |
2f1d9bdd MM |
2739 | global srcdir subdir gdb_prompt inferior_exited_re |
2740 | ||
2f1d9bdd | 2741 | set me "skip_btrace_tests" |
2f1d9bdd MM |
2742 | if { ![istarget "i?86-*-*"] && ![istarget "x86_64-*-*"] } { |
2743 | verbose "$me: target does not support btrace, returning 1" 2 | |
f3a76454 | 2744 | return 1 |
2f1d9bdd MM |
2745 | } |
2746 | ||
bf326452 AH |
2747 | # Compile a test program. |
2748 | set src { int main() { return 0; } } | |
2749 | if {![gdb_simple_compile $me $src executable]} { | |
2750 | return 0 | |
2f1d9bdd MM |
2751 | } |
2752 | ||
2753 | # No error message, compilation succeeded so now run it via gdb. | |
2754 | ||
f3a76454 TT |
2755 | gdb_exit |
2756 | gdb_start | |
2757 | gdb_reinitialize_dir $srcdir/$subdir | |
bf326452 | 2758 | gdb_load $obj |
2f1d9bdd | 2759 | if ![runto_main] { |
f3a76454 | 2760 | return 1 |
2f1d9bdd MM |
2761 | } |
2762 | # In case of an unexpected output, we return 2 as a fail value. | |
f3a76454 | 2763 | set skip_btrace_tests 2 |
2f1d9bdd MM |
2764 | gdb_test_multiple "record btrace" "check btrace support" { |
2765 | -re "You can't do that when your target is.*\r\n$gdb_prompt $" { | |
f3a76454 | 2766 | set skip_btrace_tests 1 |
2f1d9bdd MM |
2767 | } |
2768 | -re "Target does not support branch tracing.*\r\n$gdb_prompt $" { | |
f3a76454 | 2769 | set skip_btrace_tests 1 |
2f1d9bdd MM |
2770 | } |
2771 | -re "Could not enable branch tracing.*\r\n$gdb_prompt $" { | |
f3a76454 | 2772 | set skip_btrace_tests 1 |
2f1d9bdd MM |
2773 | } |
2774 | -re "^record btrace\r\n$gdb_prompt $" { | |
f3a76454 | 2775 | set skip_btrace_tests 0 |
2f1d9bdd MM |
2776 | } |
2777 | } | |
2778 | gdb_exit | |
bf326452 | 2779 | remote_file build delete $obj |
2f1d9bdd | 2780 | |
f3a76454 TT |
2781 | verbose "$me: returning $skip_btrace_tests" 2 |
2782 | return $skip_btrace_tests | |
2f1d9bdd MM |
2783 | } |
2784 | ||
da8c46d2 MM |
2785 | # Run a test on the target to see if it supports btrace pt hardware. |
2786 | # Return 0 if so, 1 if it does not. Based on 'check_vmx_hw_available' | |
2787 | # from the GCC testsuite. | |
2788 | ||
2789 | gdb_caching_proc skip_btrace_pt_tests { | |
2790 | global srcdir subdir gdb_prompt inferior_exited_re | |
2791 | ||
2792 | set me "skip_btrace_tests" | |
2793 | if { ![istarget "i?86-*-*"] && ![istarget "x86_64-*-*"] } { | |
2794 | verbose "$me: target does not support btrace, returning 1" 2 | |
2795 | return 1 | |
2796 | } | |
2797 | ||
bf326452 AH |
2798 | # Compile a test program. |
2799 | set src { int main() { return 0; } } | |
2800 | if {![gdb_simple_compile $me $src executable]} { | |
2801 | return 0 | |
da8c46d2 MM |
2802 | } |
2803 | ||
2804 | # No error message, compilation succeeded so now run it via gdb. | |
2805 | ||
2806 | gdb_exit | |
2807 | gdb_start | |
2808 | gdb_reinitialize_dir $srcdir/$subdir | |
bf326452 | 2809 | gdb_load $obj |
da8c46d2 | 2810 | if ![runto_main] { |
da8c46d2 MM |
2811 | return 1 |
2812 | } | |
da8c46d2 MM |
2813 | # In case of an unexpected output, we return 2 as a fail value. |
2814 | set skip_btrace_tests 2 | |
c4e12631 | 2815 | gdb_test_multiple "record btrace pt" "check btrace pt support" { |
da8c46d2 MM |
2816 | -re "You can't do that when your target is.*\r\n$gdb_prompt $" { |
2817 | set skip_btrace_tests 1 | |
2818 | } | |
2819 | -re "Target does not support branch tracing.*\r\n$gdb_prompt $" { | |
2820 | set skip_btrace_tests 1 | |
2821 | } | |
2822 | -re "Could not enable branch tracing.*\r\n$gdb_prompt $" { | |
2823 | set skip_btrace_tests 1 | |
2824 | } | |
c4e12631 | 2825 | -re "support was disabled at compile time.*\r\n$gdb_prompt $" { |
46a3515b MM |
2826 | set skip_btrace_tests 1 |
2827 | } | |
da8c46d2 MM |
2828 | -re "^record btrace pt\r\n$gdb_prompt $" { |
2829 | set skip_btrace_tests 0 | |
2830 | } | |
2831 | } | |
2832 | gdb_exit | |
bf326452 | 2833 | remote_file build delete $obj |
da8c46d2 MM |
2834 | |
2835 | verbose "$me: returning $skip_btrace_tests" 2 | |
2836 | return $skip_btrace_tests | |
2837 | } | |
2838 | ||
6bb8890e AH |
2839 | # Run a test on the target to see if it supports Aarch64 SVE hardware. |
2840 | # Return 0 if so, 1 if it does not. Note this causes a restart of GDB. | |
2841 | ||
2842 | gdb_caching_proc skip_aarch64_sve_tests { | |
2843 | global srcdir subdir gdb_prompt inferior_exited_re | |
2844 | ||
2845 | set me "skip_aarch64_sve_tests" | |
2846 | ||
2847 | if { ![is_aarch64_target]} { | |
2848 | return 1 | |
2849 | } | |
2850 | ||
2851 | set compile_flags "{additional_flags=-march=armv8-a+sve}" | |
2852 | ||
2853 | # Compile a test program containing SVE instructions. | |
2854 | set src { | |
2855 | int main() { | |
2856 | asm volatile ("ptrue p0.b"); | |
2857 | return 0; | |
2858 | } | |
2859 | } | |
2860 | if {![gdb_simple_compile $me $src executable $compile_flags]} { | |
2861 | return 1 | |
2862 | } | |
2863 | ||
2864 | # Compilation succeeded so now run it via gdb. | |
2865 | clean_restart $obj | |
2866 | gdb_run_cmd | |
2867 | gdb_expect { | |
2868 | -re ".*Illegal instruction.*${gdb_prompt} $" { | |
2869 | verbose -log "\n$me sve hardware not detected" | |
2870 | set skip_sve_tests 1 | |
2871 | } | |
2872 | -re ".*$inferior_exited_re normally.*${gdb_prompt} $" { | |
2873 | verbose -log "\n$me: sve hardware detected" | |
2874 | set skip_sve_tests 0 | |
2875 | } | |
2876 | default { | |
2877 | warning "\n$me: default case taken" | |
2878 | set skip_sve_tests 1 | |
2879 | } | |
2880 | } | |
2881 | gdb_exit | |
2882 | remote_file build delete $obj | |
2883 | ||
2884 | verbose "$me: returning $skip_sve_tests" 2 | |
2885 | return $skip_sve_tests | |
2886 | } | |
2887 | ||
2888 | ||
007e1530 TT |
2889 | # A helper that compiles a test case to see if __int128 is supported. |
2890 | proc gdb_int128_helper {lang} { | |
c221b2f7 | 2891 | return [gdb_can_simple_compile "i128-for-$lang" { |
007e1530 TT |
2892 | __int128 x; |
2893 | int main() { return 0; } | |
c221b2f7 | 2894 | } executable $lang] |
007e1530 TT |
2895 | } |
2896 | ||
2897 | # Return true if the C compiler understands the __int128 type. | |
2898 | gdb_caching_proc has_int128_c { | |
2899 | return [gdb_int128_helper c] | |
2900 | } | |
2901 | ||
2902 | # Return true if the C++ compiler understands the __int128 type. | |
2903 | gdb_caching_proc has_int128_cxx { | |
2904 | return [gdb_int128_helper c++] | |
2905 | } | |
2906 | ||
ca98345e SL |
2907 | # Return true if the IFUNC feature is unsupported. |
2908 | gdb_caching_proc skip_ifunc_tests { | |
2909 | if [gdb_can_simple_compile ifunc { | |
2910 | extern void f_ (); | |
2911 | typedef void F (void); | |
2912 | F* g (void) { return &f_; } | |
2913 | void f () __attribute__ ((ifunc ("g"))); | |
2914 | } object] { | |
2915 | return 0 | |
2916 | } else { | |
2917 | return 1 | |
2918 | } | |
2919 | } | |
2920 | ||
edb3359d DJ |
2921 | # Return whether we should skip tests for showing inlined functions in |
2922 | # backtraces. Requires get_compiler_info and get_debug_format. | |
2923 | ||
2924 | proc skip_inline_frame_tests {} { | |
2925 | # GDB only recognizes inlining information in DWARF 2 (DWARF 3). | |
2926 | if { ! [test_debug_format "DWARF 2"] } { | |
2927 | return 1 | |
2928 | } | |
2929 | ||
2930 | # GCC before 4.1 does not emit DW_AT_call_file / DW_AT_call_line. | |
2931 | if { ([test_compiler_info "gcc-2-*"] | |
2932 | || [test_compiler_info "gcc-3-*"] | |
2933 | || [test_compiler_info "gcc-4-0-*"]) } { | |
2934 | return 1 | |
2935 | } | |
2936 | ||
2937 | return 0 | |
2938 | } | |
2939 | ||
2940 | # Return whether we should skip tests for showing variables from | |
2941 | # inlined functions. Requires get_compiler_info and get_debug_format. | |
2942 | ||
2943 | proc skip_inline_var_tests {} { | |
2944 | # GDB only recognizes inlining information in DWARF 2 (DWARF 3). | |
2945 | if { ! [test_debug_format "DWARF 2"] } { | |
2946 | return 1 | |
2947 | } | |
2948 | ||
2949 | return 0 | |
2950 | } | |
2951 | ||
b800ec70 UW |
2952 | # Return a 1 if we should skip tests that require hardware breakpoints |
2953 | ||
2954 | proc skip_hw_breakpoint_tests {} { | |
2955 | # Skip tests if requested by the board (note that no_hardware_watchpoints | |
2956 | # disables both watchpoints and breakpoints) | |
2957 | if { [target_info exists gdb,no_hardware_watchpoints]} { | |
2958 | return 1 | |
2959 | } | |
2960 | ||
2961 | # These targets support hardware breakpoints natively | |
2962 | if { [istarget "i?86-*-*"] | |
2963 | || [istarget "x86_64-*-*"] | |
e3039479 | 2964 | || [istarget "ia64-*-*"] |
52042a00 | 2965 | || [istarget "arm*-*-*"] |
8193adea AA |
2966 | || [istarget "aarch64*-*-*"] |
2967 | || [istarget "s390*-*-*"] } { | |
b800ec70 UW |
2968 | return 0 |
2969 | } | |
2970 | ||
2971 | return 1 | |
2972 | } | |
2973 | ||
2974 | # Return a 1 if we should skip tests that require hardware watchpoints | |
2975 | ||
2976 | proc skip_hw_watchpoint_tests {} { | |
2977 | # Skip tests if requested by the board | |
2978 | if { [target_info exists gdb,no_hardware_watchpoints]} { | |
2979 | return 1 | |
2980 | } | |
2981 | ||
2982 | # These targets support hardware watchpoints natively | |
2983 | if { [istarget "i?86-*-*"] | |
2984 | || [istarget "x86_64-*-*"] | |
2985 | || [istarget "ia64-*-*"] | |
e3039479 | 2986 | || [istarget "arm*-*-*"] |
52042a00 | 2987 | || [istarget "aarch64*-*-*"] |
b800ec70 UW |
2988 | || [istarget "powerpc*-*-linux*"] |
2989 | || [istarget "s390*-*-*"] } { | |
2990 | return 0 | |
2991 | } | |
2992 | ||
2993 | return 1 | |
2994 | } | |
2995 | ||
2996 | # Return a 1 if we should skip tests that require *multiple* hardware | |
2997 | # watchpoints to be active at the same time | |
2998 | ||
2999 | proc skip_hw_watchpoint_multi_tests {} { | |
3000 | if { [skip_hw_watchpoint_tests] } { | |
3001 | return 1 | |
3002 | } | |
3003 | ||
3004 | # These targets support just a single hardware watchpoint | |
e3039479 UW |
3005 | if { [istarget "arm*-*-*"] |
3006 | || [istarget "powerpc*-*-linux*"] } { | |
b800ec70 UW |
3007 | return 1 |
3008 | } | |
3009 | ||
3010 | return 0 | |
3011 | } | |
3012 | ||
3013 | # Return a 1 if we should skip tests that require read/access watchpoints | |
3014 | ||
3015 | proc skip_hw_watchpoint_access_tests {} { | |
3016 | if { [skip_hw_watchpoint_tests] } { | |
3017 | return 1 | |
3018 | } | |
3019 | ||
3020 | # These targets support just write watchpoints | |
3021 | if { [istarget "s390*-*-*"] } { | |
3022 | return 1 | |
3023 | } | |
3024 | ||
3025 | return 0 | |
3026 | } | |
3027 | ||
b4893d48 TT |
3028 | # Return 1 if we should skip tests that require the runtime unwinder |
3029 | # hook. This must be invoked while gdb is running, after shared | |
3030 | # libraries have been loaded. This is needed because otherwise a | |
3031 | # shared libgcc won't be visible. | |
3032 | ||
3033 | proc skip_unwinder_tests {} { | |
3034 | global gdb_prompt | |
3035 | ||
4442ada7 | 3036 | set ok 0 |
b4893d48 TT |
3037 | gdb_test_multiple "print _Unwind_DebugHook" "check for unwinder hook" { |
3038 | -re "= .*no debug info.*_Unwind_DebugHook.*\r\n$gdb_prompt $" { | |
b4893d48 TT |
3039 | } |
3040 | -re "= .*_Unwind_DebugHook.*\r\n$gdb_prompt $" { | |
4442ada7 | 3041 | set ok 1 |
b4893d48 TT |
3042 | } |
3043 | -re "No symbol .* in current context.\r\n$gdb_prompt $" { | |
b4893d48 TT |
3044 | } |
3045 | } | |
3046 | if {!$ok} { | |
3047 | gdb_test_multiple "info probe" "check for stap probe in unwinder" { | |
3048 | -re ".*libgcc.*unwind.*\r\n$gdb_prompt $" { | |
b4893d48 TT |
3049 | set ok 1 |
3050 | } | |
3051 | -re "\r\n$gdb_prompt $" { | |
3052 | } | |
3053 | } | |
3054 | } | |
3055 | return $ok | |
3056 | } | |
3057 | ||
72f1fe8a TT |
3058 | # Return 0 if we should skip tests that require the libstdc++ stap |
3059 | # probes. This must be invoked while gdb is running, after shared | |
3060 | # libraries have been loaded. | |
3061 | ||
3062 | proc skip_libstdcxx_probe_tests {} { | |
3063 | global gdb_prompt | |
3064 | ||
3065 | set ok 0 | |
3066 | gdb_test_multiple "info probe" "check for stap probe in libstdc++" { | |
3067 | -re ".*libstdcxx.*catch.*\r\n$gdb_prompt $" { | |
3068 | set ok 1 | |
3069 | } | |
3070 | -re "\r\n$gdb_prompt $" { | |
3071 | } | |
3072 | } | |
3073 | return $ok | |
3074 | } | |
3075 | ||
bb2ec1b3 TT |
3076 | # Return 1 if we should skip tests of the "compile" feature. |
3077 | # This must be invoked after the inferior has been started. | |
3078 | ||
3079 | proc skip_compile_feature_tests {} { | |
3080 | global gdb_prompt | |
3081 | ||
3082 | set result 0 | |
3083 | gdb_test_multiple "compile code -- ;" "check for working compile command" { | |
3084 | "Could not load libcc1.*\r\n$gdb_prompt $" { | |
3085 | set result 1 | |
3086 | } | |
1bc1068a JK |
3087 | -re "Command not supported on this host\\..*\r\n$gdb_prompt $" { |
3088 | set result 1 | |
3089 | } | |
bb2ec1b3 TT |
3090 | -re "\r\n$gdb_prompt $" { |
3091 | } | |
3092 | } | |
3093 | return $result | |
3094 | } | |
3095 | ||
3275ef47 SM |
3096 | # Helper for gdb_is_target_* procs. TARGET_NAME is the name of the target |
3097 | # we're looking for (used to build the test name). TARGET_STACK_REGEXP | |
3098 | # is a regexp that will match the output of "maint print target-stack" if | |
3083294d SM |
3099 | # the target in question is currently pushed. PROMPT_REGEXP is a regexp |
3100 | # matching the expected prompt after the command output. | |
076855f9 | 3101 | |
3083294d | 3102 | proc gdb_is_target_1 { target_name target_stack_regexp prompt_regexp } { |
3275ef47 | 3103 | set test "probe for target ${target_name}" |
076855f9 | 3104 | gdb_test_multiple "maint print target-stack" $test { |
3275ef47 | 3105 | -re "${target_stack_regexp}${prompt_regexp}" { |
076855f9 PA |
3106 | pass $test |
3107 | return 1 | |
3108 | } | |
f015c27b | 3109 | -re "$prompt_regexp" { |
076855f9 PA |
3110 | pass $test |
3111 | } | |
3112 | } | |
3113 | return 0 | |
3114 | } | |
3115 | ||
3083294d SM |
3116 | # Helper for gdb_is_target_remote where the expected prompt is variable. |
3117 | ||
3118 | proc gdb_is_target_remote_prompt { prompt_regexp } { | |
3119 | return [gdb_is_target_1 "remote" ".*emote serial target in gdb-specific protocol.*" $prompt_regexp] | |
3120 | } | |
3121 | ||
f015c27b PA |
3122 | # Check whether we're testing with the remote or extended-remote |
3123 | # targets. | |
3124 | ||
3275ef47 | 3125 | proc gdb_is_target_remote { } { |
3083294d SM |
3126 | global gdb_prompt |
3127 | ||
3128 | return [gdb_is_target_remote_prompt "$gdb_prompt $"] | |
3275ef47 SM |
3129 | } |
3130 | ||
3131 | # Check whether we're testing with the native target. | |
f015c27b | 3132 | |
3275ef47 | 3133 | proc gdb_is_target_native { } { |
3083294d SM |
3134 | global gdb_prompt |
3135 | ||
3136 | return [gdb_is_target_1 "native" ".*native \\(Native process\\).*" "$gdb_prompt $"] | |
f015c27b PA |
3137 | } |
3138 | ||
8929ad8b SM |
3139 | # Return the effective value of use_gdb_stub. |
3140 | # | |
3141 | # If the use_gdb_stub global has been set (it is set when the gdb process is | |
3142 | # spawned), return that. Otherwise, return the value of the use_gdb_stub | |
3143 | # property from the board file. | |
3144 | # | |
3145 | # This is the preferred way of checking use_gdb_stub, since it allows to check | |
3146 | # the value before the gdb has been spawned and it will return the correct value | |
3147 | # even when it was overriden by the test. | |
3148 | ||
3149 | proc use_gdb_stub {} { | |
3150 | global use_gdb_stub | |
3151 | ||
3152 | if [info exists use_gdb_stub] { | |
3153 | return $use_gdb_stub | |
3154 | } | |
3155 | ||
3156 | return [target_info exists use_gdb_stub] | |
3157 | } | |
3158 | ||
0a46d518 SM |
3159 | # Return 1 if the current remote target is an instance of our GDBserver, 0 |
3160 | # otherwise. Return -1 if there was an error and we can't tell. | |
3161 | ||
3162 | gdb_caching_proc target_is_gdbserver { | |
3163 | global gdb_prompt | |
3164 | ||
3165 | set is_gdbserver -1 | |
bc6c7af4 | 3166 | set test "probing for GDBserver" |
0a46d518 SM |
3167 | |
3168 | gdb_test_multiple "monitor help" $test { | |
3169 | -re "The following monitor commands are supported.*Quit GDBserver.*$gdb_prompt $" { | |
3170 | set is_gdbserver 1 | |
3171 | } | |
3172 | -re "$gdb_prompt $" { | |
3173 | set is_gdbserver 0 | |
3174 | } | |
3175 | } | |
3176 | ||
3177 | if { $is_gdbserver == -1 } { | |
3178 | verbose -log "Unable to tell whether we are using GDBserver or not." | |
3179 | } | |
3180 | ||
3181 | return $is_gdbserver | |
3182 | } | |
3183 | ||
a97b16b8 DE |
3184 | # N.B. compiler_info is intended to be local to this file. |
3185 | # Call test_compiler_info with no arguments to fetch its value. | |
3186 | # Yes, this is counterintuitive when there's get_compiler_info, | |
3187 | # but that's the current API. | |
3188 | if [info exists compiler_info] { | |
3189 | unset compiler_info | |
3190 | } | |
3191 | ||
94b8e876 | 3192 | set gcc_compiled 0 |
94b8e876 MC |
3193 | |
3194 | # Figure out what compiler I am using. | |
a97b16b8 | 3195 | # The result is cached so only the first invocation runs the compiler. |
94b8e876 | 3196 | # |
4c93b1db | 3197 | # ARG can be empty or "C++". If empty, "C" is assumed. |
94b8e876 MC |
3198 | # |
3199 | # There are several ways to do this, with various problems. | |
3200 | # | |
3201 | # [ gdb_compile -E $ifile -o $binfile.ci ] | |
3202 | # source $binfile.ci | |
3203 | # | |
3204 | # Single Unix Spec v3 says that "-E -o ..." together are not | |
3205 | # specified. And in fact, the native compiler on hp-ux 11 (among | |
3206 | # others) does not work with "-E -o ...". Most targets used to do | |
3207 | # this, and it mostly worked, because it works with gcc. | |
3208 | # | |
3209 | # [ catch "exec $compiler -E $ifile > $binfile.ci" exec_output ] | |
3210 | # source $binfile.ci | |
3211 | # | |
3212 | # This avoids the problem with -E and -o together. This almost works | |
3213 | # if the build machine is the same as the host machine, which is | |
3214 | # usually true of the targets which are not gcc. But this code does | |
3215 | # not figure which compiler to call, and it always ends up using the C | |
3831839c PA |
3216 | # compiler. Not good for setting hp_aCC_compiler. Target |
3217 | # hppa*-*-hpux* used to do this. | |
94b8e876 MC |
3218 | # |
3219 | # [ gdb_compile -E $ifile > $binfile.ci ] | |
3220 | # source $binfile.ci | |
3221 | # | |
3222 | # dejagnu target_compile says that it supports output redirection, | |
3223 | # but the code is completely different from the normal path and I | |
3224 | # don't want to sweep the mines from that path. So I didn't even try | |
3225 | # this. | |
3226 | # | |
3227 | # set cppout [ gdb_compile $ifile "" preprocess $args quiet ] | |
3228 | # eval $cppout | |
3229 | # | |
3230 | # I actually do this for all targets now. gdb_compile runs the right | |
3231 | # compiler, and TCL captures the output, and I eval the output. | |
3232 | # | |
3233 | # Unfortunately, expect logs the output of the command as it goes by, | |
3234 | # and dejagnu helpfully prints a second copy of it right afterwards. | |
3235 | # So I turn off expect logging for a moment. | |
3236 | # | |
3237 | # [ gdb_compile $ifile $ciexe_file executable $args ] | |
3238 | # [ remote_exec $ciexe_file ] | |
3239 | # [ source $ci_file.out ] | |
3240 | # | |
3241 | # I could give up on -E and just do this. | |
3242 | # I didn't get desperate enough to try this. | |
3243 | # | |
3244 | # -- chastain 2004-01-06 | |
853d6e5b | 3245 | |
4c93b1db | 3246 | proc get_compiler_info {{arg ""}} { |
94b8e876 | 3247 | # For compiler.c and compiler.cc |
c906108c | 3248 | global srcdir |
94b8e876 MC |
3249 | |
3250 | # I am going to play with the log to keep noise out. | |
3251 | global outdir | |
3252 | global tool | |
3253 | ||
3254 | # These come from compiler.c or compiler.cc | |
853d6e5b | 3255 | global compiler_info |
4f70a4c9 MC |
3256 | |
3257 | # Legacy global data symbols. | |
94b8e876 | 3258 | global gcc_compiled |
c906108c | 3259 | |
a97b16b8 DE |
3260 | if [info exists compiler_info] { |
3261 | # Already computed. | |
3262 | return 0 | |
3263 | } | |
3264 | ||
94b8e876 MC |
3265 | # Choose which file to preprocess. |
3266 | set ifile "${srcdir}/lib/compiler.c" | |
4c93b1db | 3267 | if { $arg == "c++" } { |
94b8e876 | 3268 | set ifile "${srcdir}/lib/compiler.cc" |
c906108c | 3269 | } |
085dd6e6 | 3270 | |
94b8e876 MC |
3271 | # Run $ifile through the right preprocessor. |
3272 | # Toggle gdb.log to keep the compiler output out of the log. | |
95d7853e | 3273 | set saved_log [log_file -info] |
94b8e876 | 3274 | log_file |
e7f86de9 JM |
3275 | if [is_remote host] { |
3276 | # We have to use -E and -o together, despite the comments | |
3277 | # above, because of how DejaGnu handles remote host testing. | |
3278 | set ppout "$outdir/compiler.i" | |
4c93b1db | 3279 | gdb_compile "${ifile}" "$ppout" preprocess [list "$arg" quiet] |
e7f86de9 JM |
3280 | set file [open $ppout r] |
3281 | set cppout [read $file] | |
3282 | close $file | |
3283 | } else { | |
4c93b1db | 3284 | set cppout [ gdb_compile "${ifile}" "" preprocess [list "$arg" quiet] ] |
e7f86de9 | 3285 | } |
95d7853e | 3286 | eval log_file $saved_log |
94b8e876 | 3287 | |
4f70a4c9 MC |
3288 | # Eval the output. |
3289 | set unknown 0 | |
94b8e876 | 3290 | foreach cppline [ split "$cppout" "\n" ] { |
4f70a4c9 MC |
3291 | if { [ regexp "^#" "$cppline" ] } { |
3292 | # line marker | |
3293 | } elseif { [ regexp "^\[\n\r\t \]*$" "$cppline" ] } { | |
3294 | # blank line | |
3295 | } elseif { [ regexp "^\[\n\r\t \]*set\[\n\r\t \]" "$cppline" ] } { | |
3296 | # eval this line | |
3297 | verbose "get_compiler_info: $cppline" 2 | |
3298 | eval "$cppline" | |
3299 | } else { | |
3300 | # unknown line | |
3301 | verbose -log "get_compiler_info: $cppline" | |
3302 | set unknown 1 | |
94b8e876 | 3303 | } |
085dd6e6 | 3304 | } |
4f70a4c9 | 3305 | |
a97b16b8 DE |
3306 | # Set to unknown if for some reason compiler_info didn't get defined. |
3307 | if ![info exists compiler_info] { | |
3308 | verbose -log "get_compiler_info: compiler_info not provided" | |
3309 | set compiler_info "unknown" | |
3310 | } | |
3311 | # Also set to unknown compiler if any diagnostics happened. | |
4f70a4c9 | 3312 | if { $unknown } { |
a97b16b8 | 3313 | verbose -log "get_compiler_info: got unexpected diagnostics" |
4f70a4c9 | 3314 | set compiler_info "unknown" |
4f70a4c9 MC |
3315 | } |
3316 | ||
3317 | # Set the legacy symbols. | |
f90fd8c2 JK |
3318 | set gcc_compiled 0 |
3319 | regexp "^gcc-(\[0-9\]+)-" "$compiler_info" matchall gcc_compiled | |
4f70a4c9 MC |
3320 | |
3321 | # Log what happened. | |
94b8e876 | 3322 | verbose -log "get_compiler_info: $compiler_info" |
085dd6e6 JM |
3323 | |
3324 | # Most compilers will evaluate comparisons and other boolean | |
3325 | # operations to 0 or 1. | |
3326 | uplevel \#0 { set true 1 } | |
3327 | uplevel \#0 { set false 0 } | |
3328 | ||
ae59b1da | 3329 | return 0 |
c906108c SS |
3330 | } |
3331 | ||
a97b16b8 DE |
3332 | # Return the compiler_info string if no arg is provided. |
3333 | # Otherwise the argument is a glob-style expression to match against | |
3334 | # compiler_info. | |
3335 | ||
9b593790 | 3336 | proc test_compiler_info { {compiler ""} } { |
853d6e5b | 3337 | global compiler_info |
a97b16b8 | 3338 | get_compiler_info |
6e87504d | 3339 | |
a97b16b8 DE |
3340 | # If no arg, return the compiler_info string. |
3341 | if [string match "" $compiler] { | |
3342 | return $compiler_info | |
3343 | } | |
6e87504d | 3344 | |
853d6e5b AC |
3345 | return [string match $compiler $compiler_info] |
3346 | } | |
3347 | ||
f6838f81 DJ |
3348 | proc current_target_name { } { |
3349 | global target_info | |
3350 | if [info exists target_info(target,name)] { | |
3351 | set answer $target_info(target,name) | |
3352 | } else { | |
3353 | set answer "" | |
3354 | } | |
3355 | return $answer | |
3356 | } | |
3357 | ||
f1c47eb2 | 3358 | set gdb_wrapper_initialized 0 |
f6838f81 | 3359 | set gdb_wrapper_target "" |
f1c47eb2 MS |
3360 | |
3361 | proc gdb_wrapper_init { args } { | |
4ec70201 PA |
3362 | global gdb_wrapper_initialized |
3363 | global gdb_wrapper_file | |
3364 | global gdb_wrapper_flags | |
f6838f81 | 3365 | global gdb_wrapper_target |
f1c47eb2 MS |
3366 | |
3367 | if { $gdb_wrapper_initialized == 1 } { return; } | |
3368 | ||
3369 | if {[target_info exists needs_status_wrapper] && \ | |
277254ba | 3370 | [target_info needs_status_wrapper] != "0"} { |
4ec70201 | 3371 | set result [build_wrapper "testglue.o"] |
f1c47eb2 | 3372 | if { $result != "" } { |
4ec70201 PA |
3373 | set gdb_wrapper_file [lindex $result 0] |
3374 | set gdb_wrapper_flags [lindex $result 1] | |
f1c47eb2 MS |
3375 | } else { |
3376 | warning "Status wrapper failed to build." | |
3377 | } | |
3378 | } | |
3379 | set gdb_wrapper_initialized 1 | |
f6838f81 | 3380 | set gdb_wrapper_target [current_target_name] |
f1c47eb2 MS |
3381 | } |
3382 | ||
bf0ec4c2 AA |
3383 | # Determine options that we always want to pass to the compiler. |
3384 | gdb_caching_proc universal_compile_options { | |
3385 | set me "universal_compile_options" | |
3386 | set options {} | |
3387 | ||
3388 | set src [standard_temp_file ccopts[pid].c] | |
3389 | set obj [standard_temp_file ccopts[pid].o] | |
3390 | ||
3391 | gdb_produce_source $src { | |
3392 | int foo(void) { return 0; } | |
3393 | } | |
3394 | ||
3395 | # Try an option for disabling colored diagnostics. Some compilers | |
3396 | # yield colored diagnostics by default (when run from a tty) unless | |
3397 | # such an option is specified. | |
3398 | set opt "additional_flags=-fdiagnostics-color=never" | |
3399 | set lines [target_compile $src $obj object [list "quiet" $opt]] | |
3400 | if [string match "" $lines] then { | |
3401 | # Seems to have worked; use the option. | |
3402 | lappend options $opt | |
3403 | } | |
3404 | file delete $src | |
3405 | file delete $obj | |
3406 | ||
3407 | verbose "$me: returning $options" 2 | |
3408 | return $options | |
3409 | } | |
3410 | ||
c221b2f7 AH |
3411 | # Compile the code in $code to a file based on $name, using the flags |
3412 | # $compile_flag as well as debug, nowarning and quiet. | |
3413 | # Return 1 if code can be compiled | |
bf326452 | 3414 | # Leave the file name of the resulting object in the upvar object. |
c221b2f7 | 3415 | |
bf326452 AH |
3416 | proc gdb_simple_compile {name code {type object} {compile_flags {}} {object obj}} { |
3417 | upvar $object obj | |
c221b2f7 AH |
3418 | |
3419 | switch -regexp -- $type { | |
3420 | "executable" { | |
3421 | set postfix "x" | |
3422 | } | |
3423 | "object" { | |
3424 | set postfix "o" | |
3425 | } | |
3426 | "preprocess" { | |
3427 | set postfix "i" | |
3428 | } | |
3429 | "assembly" { | |
3430 | set postfix "s" | |
3431 | } | |
3432 | } | |
3433 | set src [standard_temp_file $name-[pid].c] | |
3434 | set obj [standard_temp_file $name-[pid].$postfix] | |
3435 | set compile_flags [concat $compile_flags {debug nowarnings quiet}] | |
3436 | ||
3437 | gdb_produce_source $src $code | |
3438 | ||
3439 | verbose "$name: compiling testfile $src" 2 | |
3440 | set lines [gdb_compile $src $obj $type $compile_flags] | |
3441 | ||
3442 | file delete $src | |
c221b2f7 AH |
3443 | |
3444 | if ![string match "" $lines] then { | |
3445 | verbose "$name: compilation failed, returning 0" 2 | |
3446 | return 0 | |
3447 | } | |
3448 | return 1 | |
3449 | } | |
3450 | ||
bf326452 AH |
3451 | # Compile the code in $code to a file based on $name, using the flags |
3452 | # $compile_flag as well as debug, nowarning and quiet. | |
3453 | # Return 1 if code can be compiled | |
3454 | # Delete all created files and objects. | |
3455 | ||
3456 | proc gdb_can_simple_compile {name code {type object} {compile_flags ""}} { | |
3457 | set ret [gdb_simple_compile $name $code $type $compile_flags temp_obj] | |
3458 | file delete $temp_obj | |
3459 | return $ret | |
3460 | } | |
3461 | ||
f747e0ce PA |
3462 | # Some targets need to always link a special object in. Save its path here. |
3463 | global gdb_saved_set_unbuffered_mode_obj | |
3464 | set gdb_saved_set_unbuffered_mode_obj "" | |
3465 | ||
aff9c0f8 SM |
3466 | # Compile source files specified by SOURCE into a binary of type TYPE at path |
3467 | # DEST. gdb_compile is implemented using DejaGnu's target_compile, so the type | |
3468 | # parameter and most options are passed directly to it. | |
3469 | # | |
3470 | # The type can be one of the following: | |
3471 | # | |
3472 | # - object: Compile into an object file. | |
3473 | # - executable: Compile and link into an executable. | |
3474 | # - preprocess: Preprocess the source files. | |
3475 | # - assembly: Generate assembly listing. | |
3476 | # | |
3477 | # The following options are understood and processed by gdb_compile: | |
3478 | # | |
3479 | # - shlib=so_path: Add SO_PATH to the sources, and enable some target-specific | |
3480 | # quirks to be able to use shared libraries. | |
3481 | # - shlib_load: Link with appropriate libraries to allow the test to | |
3482 | # dynamically load libraries at runtime. For example, on Linux, this adds | |
3483 | # -ldl so that the test can use dlopen. | |
3484 | # - nowarnings: Inhibit all compiler warnings. | |
3485 | # | |
3486 | # And here are some of the not too obscure options understood by DejaGnu that | |
3487 | # influence the compilation: | |
3488 | # | |
3489 | # - additional_flags=flag: Add FLAG to the compiler flags. | |
3490 | # - libs=library: Add LIBRARY to the libraries passed to the linker. The | |
3491 | # argument can be a file, in which case it's added to the sources, or a | |
3492 | # linker flag. | |
3493 | # - ldflags=flag: Add FLAG to the linker flags. | |
3494 | # - incdir=path: Add PATH to the searched include directories. | |
3495 | # - libdir=path: Add PATH to the linker searched directories. | |
3496 | # - ada, c++, f77: Compile the file as Ada, C++ or Fortran. | |
3497 | # - debug: Build with debug information. | |
3498 | # - optimize: Build with optimization. | |
3499 | ||
c906108c | 3500 | proc gdb_compile {source dest type options} { |
4ec70201 PA |
3501 | global GDB_TESTCASE_OPTIONS |
3502 | global gdb_wrapper_file | |
3503 | global gdb_wrapper_flags | |
3504 | global gdb_wrapper_initialized | |
f747e0ce PA |
3505 | global srcdir |
3506 | global objdir | |
3507 | global gdb_saved_set_unbuffered_mode_obj | |
c906108c | 3508 | |
695e2681 MK |
3509 | set outdir [file dirname $dest] |
3510 | ||
3511 | # Add platform-specific options if a shared library was specified using | |
3512 | # "shlib=librarypath" in OPTIONS. | |
dcc06925 | 3513 | set new_options {} |
5eb5f850 TT |
3514 | if {[lsearch -exact $options rust] != -1} { |
3515 | # -fdiagnostics-color is not a rustcc option. | |
3516 | } else { | |
3517 | set new_options [universal_compile_options] | |
3518 | } | |
695e2681 | 3519 | set shlib_found 0 |
bdf7534a | 3520 | set shlib_load 0 |
695e2681 | 3521 | foreach opt $options { |
6181e9c2 SM |
3522 | if {[regexp {^shlib=(.*)} $opt dummy_var shlib_name] |
3523 | && $type == "executable"} { | |
57bf0e56 | 3524 | if [test_compiler_info "xlc-*"] { |
93f02886 DJ |
3525 | # IBM xlc compiler doesn't accept shared library named other |
3526 | # than .so: use "-Wl," to bypass this | |
3527 | lappend source "-Wl,$shlib_name" | |
3528 | } elseif { ([istarget "*-*-mingw*"] | |
3529 | || [istarget *-*-cygwin*] | |
3530 | || [istarget *-*-pe*])} { | |
3531 | lappend source "${shlib_name}.a" | |
57bf0e56 DJ |
3532 | } else { |
3533 | lappend source $shlib_name | |
3534 | } | |
0413d738 | 3535 | if { $shlib_found == 0 } { |
57bf0e56 | 3536 | set shlib_found 1 |
0413d738 PA |
3537 | if { ([istarget "*-*-mingw*"] |
3538 | || [istarget *-*-cygwin*]) } { | |
bb61102d | 3539 | lappend new_options "additional_flags=-Wl,--enable-auto-import" |
0413d738 | 3540 | } |
6ebea266 DE |
3541 | if { [test_compiler_info "gcc-*"] || [test_compiler_info "clang-*"] } { |
3542 | # Undo debian's change in the default. | |
3543 | # Put it at the front to not override any user-provided | |
3544 | # value, and to make sure it appears in front of all the | |
3545 | # shlibs! | |
3546 | lappend new_options "early_flags=-Wl,--no-as-needed" | |
3547 | } | |
57bf0e56 | 3548 | } |
6181e9c2 | 3549 | } elseif { $opt == "shlib_load" && $type == "executable" } { |
bdf7534a | 3550 | set shlib_load 1 |
57bf0e56 DJ |
3551 | } else { |
3552 | lappend new_options $opt | |
3553 | } | |
695e2681 | 3554 | } |
bdf7534a | 3555 | |
6e774b13 SM |
3556 | # Because we link with libraries using their basename, we may need |
3557 | # (depending on the platform) to set a special rpath value, to allow | |
3558 | # the executable to find the libraries it depends on. | |
3559 | if { $shlib_load || $shlib_found } { | |
bdf7534a NF |
3560 | if { ([istarget "*-*-mingw*"] |
3561 | || [istarget *-*-cygwin*] | |
3ca22649 | 3562 | || [istarget *-*-pe*]) } { |
bdf7534a | 3563 | # Do not need anything. |
b2a6bdeb | 3564 | } elseif { [istarget *-*-freebsd*] || [istarget *-*-openbsd*] } { |
d8b34041 | 3565 | lappend new_options "ldflags=-Wl,-rpath,${outdir}" |
759f0f0b PA |
3566 | } elseif { [istarget arm*-*-symbianelf*] } { |
3567 | if { $shlib_load } { | |
3568 | lappend new_options "libs=-ldl" | |
3569 | } | |
bdf7534a NF |
3570 | } else { |
3571 | if { $shlib_load } { | |
3572 | lappend new_options "libs=-ldl" | |
3573 | } | |
d8b34041 | 3574 | lappend new_options "ldflags=-Wl,-rpath,\\\$ORIGIN" |
bdf7534a NF |
3575 | } |
3576 | } | |
695e2681 | 3577 | set options $new_options |
57bf0e56 | 3578 | |
c906108c | 3579 | if [info exists GDB_TESTCASE_OPTIONS] { |
4ec70201 | 3580 | lappend options "additional_flags=$GDB_TESTCASE_OPTIONS" |
c906108c SS |
3581 | } |
3582 | verbose "options are $options" | |
3583 | verbose "source is $source $dest $type $options" | |
3584 | ||
f1c47eb2 MS |
3585 | if { $gdb_wrapper_initialized == 0 } { gdb_wrapper_init } |
3586 | ||
3587 | if {[target_info exists needs_status_wrapper] && \ | |
3588 | [target_info needs_status_wrapper] != "0" && \ | |
3589 | [info exists gdb_wrapper_file]} { | |
3590 | lappend options "libs=${gdb_wrapper_file}" | |
3591 | lappend options "ldflags=${gdb_wrapper_flags}" | |
3592 | } | |
3593 | ||
fc91c6c2 PB |
3594 | # Replace the "nowarnings" option with the appropriate additional_flags |
3595 | # to disable compiler warnings. | |
3596 | set nowarnings [lsearch -exact $options nowarnings] | |
3597 | if {$nowarnings != -1} { | |
3598 | if [target_info exists gdb,nowarnings_flag] { | |
3599 | set flag "additional_flags=[target_info gdb,nowarnings_flag]" | |
3600 | } else { | |
3601 | set flag "additional_flags=-w" | |
3602 | } | |
3603 | set options [lreplace $options $nowarnings $nowarnings $flag] | |
3604 | } | |
3605 | ||
f747e0ce PA |
3606 | if { $type == "executable" } { |
3607 | if { ([istarget "*-*-mingw*"] | |
56643c5e | 3608 | || [istarget "*-*-*djgpp"] |
f747e0ce PA |
3609 | || [istarget "*-*-cygwin*"])} { |
3610 | # Force output to unbuffered mode, by linking in an object file | |
3611 | # with a global contructor that calls setvbuf. | |
3612 | # | |
3613 | # Compile the special object seperatelly for two reasons: | |
3614 | # 1) Insulate it from $options. | |
3615 | # 2) Avoid compiling it for every gdb_compile invocation, | |
3616 | # which is time consuming, especially if we're remote | |
3617 | # host testing. | |
3618 | # | |
3619 | if { $gdb_saved_set_unbuffered_mode_obj == "" } { | |
3620 | verbose "compiling gdb_saved_set_unbuffered_obj" | |
3621 | set unbuf_src ${srcdir}/lib/set_unbuffered_mode.c | |
3622 | set unbuf_obj ${objdir}/set_unbuffered_mode.o | |
3623 | ||
3624 | set result [gdb_compile "${unbuf_src}" "${unbuf_obj}" object {nowarnings}] | |
3625 | if { $result != "" } { | |
3626 | return $result | |
3627 | } | |
f6dc277e YQ |
3628 | if {[is_remote host]} { |
3629 | set gdb_saved_set_unbuffered_mode_obj set_unbuffered_mode_saved.o | |
3630 | } else { | |
3631 | set gdb_saved_set_unbuffered_mode_obj ${objdir}/set_unbuffered_mode_saved.o | |
3632 | } | |
f747e0ce PA |
3633 | # Link a copy of the output object, because the |
3634 | # original may be automatically deleted. | |
f6dc277e | 3635 | remote_download host $unbuf_obj $gdb_saved_set_unbuffered_mode_obj |
f747e0ce PA |
3636 | } else { |
3637 | verbose "gdb_saved_set_unbuffered_obj already compiled" | |
3638 | } | |
3639 | ||
3640 | # Rely on the internal knowledge that the global ctors are ran in | |
3641 | # reverse link order. In that case, we can use ldflags to | |
3642 | # avoid copying the object file to the host multiple | |
3643 | # times. | |
ace5c364 PM |
3644 | # This object can only be added if standard libraries are |
3645 | # used. Thus, we need to disable it if -nostdlib option is used | |
3646 | if {[lsearch -regexp $options "-nostdlib"] < 0 } { | |
3647 | lappend options "ldflags=$gdb_saved_set_unbuffered_mode_obj" | |
3648 | } | |
f747e0ce PA |
3649 | } |
3650 | } | |
3651 | ||
4ec70201 | 3652 | set result [target_compile $source $dest $type $options] |
93f02886 DJ |
3653 | |
3654 | # Prune uninteresting compiler (and linker) output. | |
3655 | regsub "Creating library file: \[^\r\n\]*\[\r\n\]+" $result "" result | |
3656 | ||
4ec70201 PA |
3657 | regsub "\[\r\n\]*$" "$result" "" result |
3658 | regsub "^\[\r\n\]*" "$result" "" result | |
ec3c07fc NS |
3659 | |
3660 | if {[lsearch $options quiet] < 0} { | |
3661 | # We shall update this on a per language basis, to avoid | |
3662 | # changing the entire testsuite in one go. | |
3663 | if {[lsearch $options f77] >= 0} { | |
3664 | gdb_compile_test $source $result | |
3665 | } elseif { $result != "" } { | |
3666 | clone_output "gdb compile failed, $result" | |
3667 | } | |
c906108c | 3668 | } |
ae59b1da | 3669 | return $result |
c906108c SS |
3670 | } |
3671 | ||
b6ff0e81 JB |
3672 | |
3673 | # This is just like gdb_compile, above, except that it tries compiling | |
3674 | # against several different thread libraries, to see which one this | |
3675 | # system has. | |
3676 | proc gdb_compile_pthreads {source dest type options} { | |
0ae67eb3 | 3677 | set built_binfile 0 |
b6ff0e81 | 3678 | set why_msg "unrecognized error" |
24486cb7 | 3679 | foreach lib {-lpthreads -lpthread -lthread ""} { |
b6ff0e81 JB |
3680 | # This kind of wipes out whatever libs the caller may have |
3681 | # set. Or maybe theirs will override ours. How infelicitous. | |
b5ab8ff3 | 3682 | set options_with_lib [concat $options [list libs=$lib quiet]] |
b6ff0e81 JB |
3683 | set ccout [gdb_compile $source $dest $type $options_with_lib] |
3684 | switch -regexp -- $ccout { | |
3685 | ".*no posix threads support.*" { | |
3686 | set why_msg "missing threads include file" | |
3687 | break | |
3688 | } | |
3689 | ".*cannot open -lpthread.*" { | |
3690 | set why_msg "missing runtime threads library" | |
3691 | } | |
3692 | ".*Can't find library for -lpthread.*" { | |
3693 | set why_msg "missing runtime threads library" | |
3694 | } | |
3695 | {^$} { | |
3696 | pass "successfully compiled posix threads test case" | |
3697 | set built_binfile 1 | |
3698 | break | |
3699 | } | |
3700 | } | |
3701 | } | |
0ae67eb3 | 3702 | if {!$built_binfile} { |
bc6c7af4 | 3703 | unsupported "couldn't compile [file tail $source]: ${why_msg}" |
b6ff0e81 JB |
3704 | return -1 |
3705 | } | |
57bf0e56 DJ |
3706 | } |
3707 | ||
409d8f48 | 3708 | # Build a shared library from SOURCES. |
57bf0e56 DJ |
3709 | |
3710 | proc gdb_compile_shlib {sources dest options} { | |
3711 | set obj_options $options | |
3712 | ||
409d8f48 AB |
3713 | set info_options "" |
3714 | if { [lsearch -exact $options "c++"] >= 0 } { | |
3715 | set info_options "c++" | |
3716 | } | |
3717 | if [get_compiler_info ${info_options}] { | |
3718 | return -1 | |
3719 | } | |
3720 | ||
57bf0e56 DJ |
3721 | switch -glob [test_compiler_info] { |
3722 | "xlc-*" { | |
3723 | lappend obj_options "additional_flags=-qpic" | |
3724 | } | |
ee92b0dd DE |
3725 | "clang-*" { |
3726 | if { !([istarget "*-*-cygwin*"] | |
3727 | || [istarget "*-*-mingw*"]) } { | |
3728 | lappend obj_options "additional_flags=-fpic" | |
3729 | } | |
3730 | } | |
57bf0e56 DJ |
3731 | "gcc-*" { |
3732 | if { !([istarget "powerpc*-*-aix*"] | |
227c54da DJ |
3733 | || [istarget "rs6000*-*-aix*"] |
3734 | || [istarget "*-*-cygwin*"] | |
3735 | || [istarget "*-*-mingw*"] | |
3736 | || [istarget "*-*-pe*"]) } { | |
57bf0e56 DJ |
3737 | lappend obj_options "additional_flags=-fpic" |
3738 | } | |
3739 | } | |
9b9b09e9 BH |
3740 | "icc-*" { |
3741 | lappend obj_options "additional_flags=-fpic" | |
3742 | } | |
57bf0e56 | 3743 | default { |
3ca22649 | 3744 | # don't know what the compiler is... |
57bf0e56 DJ |
3745 | } |
3746 | } | |
3747 | ||
3748 | set outdir [file dirname $dest] | |
3749 | set objects "" | |
3750 | foreach source $sources { | |
3751 | set sourcebase [file tail $source] | |
3752 | if {[gdb_compile $source "${outdir}/${sourcebase}.o" object $obj_options] != ""} { | |
3753 | return -1 | |
3754 | } | |
3755 | lappend objects ${outdir}/${sourcebase}.o | |
3756 | } | |
3757 | ||
3ca22649 SM |
3758 | set link_options $options |
3759 | if [test_compiler_info "xlc-*"] { | |
3760 | lappend link_options "additional_flags=-qmkshrobj" | |
57bf0e56 | 3761 | } else { |
3ca22649 SM |
3762 | lappend link_options "additional_flags=-shared" |
3763 | ||
3764 | if { ([istarget "*-*-mingw*"] | |
3765 | || [istarget *-*-cygwin*] | |
3766 | || [istarget *-*-pe*]) } { | |
3767 | if { [is_remote host] } { | |
3768 | set name [file tail ${dest}] | |
3769 | } else { | |
3770 | set name ${dest} | |
3771 | } | |
3772 | lappend link_options "additional_flags=-Wl,--out-implib,${name}.a" | |
6e774b13 SM |
3773 | } else { |
3774 | # Set the soname of the library. This causes the linker on ELF | |
3775 | # systems to create the DT_NEEDED entry in the executable referring | |
3776 | # to the soname of the library, and not its absolute path. This | |
3777 | # (using the absolute path) would be problem when testing on a | |
3778 | # remote target. | |
3779 | # | |
3780 | # In conjunction with setting the soname, we add the special | |
3781 | # rpath=$ORIGIN value when building the executable, so that it's | |
3782 | # able to find the library in its own directory. | |
3ca22649 SM |
3783 | set destbase [file tail $dest] |
3784 | lappend link_options "additional_flags=-Wl,-soname,$destbase" | |
3785 | } | |
3786 | } | |
3787 | if {[gdb_compile "${objects}" "${dest}" executable $link_options] != ""} { | |
3788 | return -1 | |
57bf0e56 | 3789 | } |
3ca22649 SM |
3790 | if { [is_remote host] |
3791 | && ([istarget "*-*-mingw*"] | |
3792 | || [istarget *-*-cygwin*] | |
3793 | || [istarget *-*-pe*]) } { | |
3794 | set dest_tail_name [file tail ${dest}] | |
3795 | remote_upload host $dest_tail_name.a ${dest}.a | |
3796 | remote_file host delete $dest_tail_name.a | |
3797 | } | |
3798 | ||
3799 | return "" | |
b6ff0e81 JB |
3800 | } |
3801 | ||
756d88a7 UW |
3802 | # This is just like gdb_compile_shlib, above, except that it tries compiling |
3803 | # against several different thread libraries, to see which one this | |
3804 | # system has. | |
3805 | proc gdb_compile_shlib_pthreads {sources dest options} { | |
3806 | set built_binfile 0 | |
3807 | set why_msg "unrecognized error" | |
3808 | foreach lib {-lpthreads -lpthread -lthread ""} { | |
3809 | # This kind of wipes out whatever libs the caller may have | |
3810 | # set. Or maybe theirs will override ours. How infelicitous. | |
3811 | set options_with_lib [concat $options [list libs=$lib quiet]] | |
3812 | set ccout [gdb_compile_shlib $sources $dest $options_with_lib] | |
3813 | switch -regexp -- $ccout { | |
3814 | ".*no posix threads support.*" { | |
3815 | set why_msg "missing threads include file" | |
3816 | break | |
3817 | } | |
3818 | ".*cannot open -lpthread.*" { | |
3819 | set why_msg "missing runtime threads library" | |
3820 | } | |
3821 | ".*Can't find library for -lpthread.*" { | |
3822 | set why_msg "missing runtime threads library" | |
3823 | } | |
3824 | {^$} { | |
3825 | pass "successfully compiled posix threads test case" | |
3826 | set built_binfile 1 | |
3827 | break | |
3828 | } | |
3829 | } | |
3830 | } | |
3831 | if {!$built_binfile} { | |
bc6c7af4 | 3832 | unsupported "couldn't compile $sources: ${why_msg}" |
756d88a7 UW |
3833 | return -1 |
3834 | } | |
3835 | } | |
3836 | ||
130cacce AF |
3837 | # This is just like gdb_compile_pthreads, above, except that we always add the |
3838 | # objc library for compiling Objective-C programs | |
3839 | proc gdb_compile_objc {source dest type options} { | |
3840 | set built_binfile 0 | |
3841 | set why_msg "unrecognized error" | |
3842 | foreach lib {-lobjc -lpthreads -lpthread -lthread solaris} { | |
3843 | # This kind of wipes out whatever libs the caller may have | |
3844 | # set. Or maybe theirs will override ours. How infelicitous. | |
3845 | if { $lib == "solaris" } { | |
3846 | set lib "-lpthread -lposix4" | |
3847 | } | |
3848 | if { $lib != "-lobjc" } { | |
3849 | set lib "-lobjc $lib" | |
3850 | } | |
3851 | set options_with_lib [concat $options [list libs=$lib quiet]] | |
3852 | set ccout [gdb_compile $source $dest $type $options_with_lib] | |
3853 | switch -regexp -- $ccout { | |
3854 | ".*no posix threads support.*" { | |
3855 | set why_msg "missing threads include file" | |
3856 | break | |
3857 | } | |
3858 | ".*cannot open -lpthread.*" { | |
3859 | set why_msg "missing runtime threads library" | |
3860 | } | |
3861 | ".*Can't find library for -lpthread.*" { | |
3862 | set why_msg "missing runtime threads library" | |
3863 | } | |
3864 | {^$} { | |
3865 | pass "successfully compiled objc with posix threads test case" | |
3866 | set built_binfile 1 | |
3867 | break | |
3868 | } | |
3869 | } | |
3870 | } | |
3871 | if {!$built_binfile} { | |
bc6c7af4 | 3872 | unsupported "couldn't compile [file tail $source]: ${why_msg}" |
130cacce AF |
3873 | return -1 |
3874 | } | |
3875 | } | |
3876 | ||
c906108c | 3877 | proc send_gdb { string } { |
4ec70201 | 3878 | global suppress_flag |
c906108c | 3879 | if { $suppress_flag } { |
ae59b1da | 3880 | return "suppressed" |
c906108c | 3881 | } |
ae59b1da | 3882 | return [remote_send host "$string"] |
c906108c SS |
3883 | } |
3884 | ||
f71c18e7 PA |
3885 | # Send STRING to the inferior's terminal. |
3886 | ||
3887 | proc send_inferior { string } { | |
3888 | global inferior_spawn_id | |
3889 | ||
3890 | if {[catch "send -i $inferior_spawn_id -- \$string" errorInfo]} { | |
3891 | return "$errorInfo" | |
3892 | } else { | |
3893 | return "" | |
3894 | } | |
3895 | } | |
3896 | ||
c906108c SS |
3897 | # |
3898 | # | |
3899 | ||
3900 | proc gdb_expect { args } { | |
3901 | if { [llength $args] == 2 && [lindex $args 0] != "-re" } { | |
4ec70201 PA |
3902 | set atimeout [lindex $args 0] |
3903 | set expcode [list [lindex $args 1]] | |
c906108c | 3904 | } else { |
4ec70201 | 3905 | set expcode $args |
2f34202f MR |
3906 | } |
3907 | ||
4a40f85a MR |
3908 | # A timeout argument takes precedence, otherwise of all the timeouts |
3909 | # select the largest. | |
4a40f85a MR |
3910 | if [info exists atimeout] { |
3911 | set tmt $atimeout | |
3912 | } else { | |
45fd756c | 3913 | set tmt [get_largest_timeout] |
c906108c | 3914 | } |
2f34202f | 3915 | |
4ec70201 PA |
3916 | global suppress_flag |
3917 | global remote_suppress_flag | |
c906108c | 3918 | if [info exists remote_suppress_flag] { |
4ec70201 | 3919 | set old_val $remote_suppress_flag |
c906108c SS |
3920 | } |
3921 | if [info exists suppress_flag] { | |
3922 | if { $suppress_flag } { | |
4ec70201 | 3923 | set remote_suppress_flag 1 |
c906108c SS |
3924 | } |
3925 | } | |
a0b3c4fd | 3926 | set code [catch \ |
4a40f85a | 3927 | {uplevel remote_expect host $tmt $expcode} string] |
c906108c | 3928 | if [info exists old_val] { |
4ec70201 | 3929 | set remote_suppress_flag $old_val |
c906108c SS |
3930 | } else { |
3931 | if [info exists remote_suppress_flag] { | |
4ec70201 | 3932 | unset remote_suppress_flag |
c906108c SS |
3933 | } |
3934 | } | |
3935 | ||
3936 | if {$code == 1} { | |
4ec70201 | 3937 | global errorInfo errorCode |
c906108c SS |
3938 | |
3939 | return -code error -errorinfo $errorInfo -errorcode $errorCode $string | |
d6d7a51a | 3940 | } else { |
c906108c SS |
3941 | return -code $code $string |
3942 | } | |
3943 | } | |
3944 | ||
5fa290c1 | 3945 | # gdb_expect_list TEST SENTINEL LIST -- expect a sequence of outputs |
085dd6e6 JM |
3946 | # |
3947 | # Check for long sequence of output by parts. | |
5fa290c1 | 3948 | # TEST: is the test message to be printed with the test success/fail. |
085dd6e6 JM |
3949 | # SENTINEL: Is the terminal pattern indicating that output has finished. |
3950 | # LIST: is the sequence of outputs to match. | |
3951 | # If the sentinel is recognized early, it is considered an error. | |
3952 | # | |
11cf8741 JM |
3953 | # Returns: |
3954 | # 1 if the test failed, | |
3955 | # 0 if the test passes, | |
3956 | # -1 if there was an internal error. | |
5fa290c1 | 3957 | |
c2d11a7d | 3958 | proc gdb_expect_list {test sentinel list} { |
085dd6e6 | 3959 | global gdb_prompt |
11cf8741 | 3960 | global suppress_flag |
085dd6e6 | 3961 | set index 0 |
43ff13b4 | 3962 | set ok 1 |
11cf8741 JM |
3963 | if { $suppress_flag } { |
3964 | set ok 0 | |
a20ce2c3 | 3965 | unresolved "${test}" |
11cf8741 | 3966 | } |
43ff13b4 | 3967 | while { ${index} < [llength ${list}] } { |
085dd6e6 JM |
3968 | set pattern [lindex ${list} ${index}] |
3969 | set index [expr ${index} + 1] | |
6b0ecdc2 | 3970 | verbose -log "gdb_expect_list pattern: /$pattern/" 2 |
085dd6e6 | 3971 | if { ${index} == [llength ${list}] } { |
43ff13b4 JM |
3972 | if { ${ok} } { |
3973 | gdb_expect { | |
c2d11a7d | 3974 | -re "${pattern}${sentinel}" { |
a20ce2c3 | 3975 | # pass "${test}, pattern ${index} + sentinel" |
c2d11a7d JM |
3976 | } |
3977 | -re "${sentinel}" { | |
a20ce2c3 | 3978 | fail "${test} (pattern ${index} + sentinel)" |
c2d11a7d | 3979 | set ok 0 |
43ff13b4 | 3980 | } |
5c5455dc AC |
3981 | -re ".*A problem internal to GDB has been detected" { |
3982 | fail "${test} (GDB internal error)" | |
3983 | set ok 0 | |
3984 | gdb_internal_error_resync | |
3985 | } | |
43ff13b4 | 3986 | timeout { |
a20ce2c3 | 3987 | fail "${test} (pattern ${index} + sentinel) (timeout)" |
43ff13b4 JM |
3988 | set ok 0 |
3989 | } | |
085dd6e6 | 3990 | } |
43ff13b4 | 3991 | } else { |
a20ce2c3 | 3992 | # unresolved "${test}, pattern ${index} + sentinel" |
085dd6e6 JM |
3993 | } |
3994 | } else { | |
43ff13b4 JM |
3995 | if { ${ok} } { |
3996 | gdb_expect { | |
3997 | -re "${pattern}" { | |
a20ce2c3 | 3998 | # pass "${test}, pattern ${index}" |
43ff13b4 | 3999 | } |
c2d11a7d | 4000 | -re "${sentinel}" { |
a20ce2c3 | 4001 | fail "${test} (pattern ${index})" |
43ff13b4 JM |
4002 | set ok 0 |
4003 | } | |
5c5455dc AC |
4004 | -re ".*A problem internal to GDB has been detected" { |
4005 | fail "${test} (GDB internal error)" | |
4006 | set ok 0 | |
4007 | gdb_internal_error_resync | |
4008 | } | |
43ff13b4 | 4009 | timeout { |
a20ce2c3 | 4010 | fail "${test} (pattern ${index}) (timeout)" |
43ff13b4 JM |
4011 | set ok 0 |
4012 | } | |
085dd6e6 | 4013 | } |
43ff13b4 | 4014 | } else { |
a20ce2c3 | 4015 | # unresolved "${test}, pattern ${index}" |
085dd6e6 JM |
4016 | } |
4017 | } | |
4018 | } | |
11cf8741 | 4019 | if { ${ok} } { |
a20ce2c3 | 4020 | pass "${test}" |
11cf8741 JM |
4021 | return 0 |
4022 | } else { | |
4023 | return 1 | |
4024 | } | |
085dd6e6 JM |
4025 | } |
4026 | ||
4027 | # | |
4028 | # | |
c906108c | 4029 | proc gdb_suppress_entire_file { reason } { |
4ec70201 | 4030 | global suppress_flag |
c906108c | 4031 | |
4ec70201 PA |
4032 | warning "$reason\n" |
4033 | set suppress_flag -1 | |
c906108c SS |
4034 | } |
4035 | ||
4036 | # | |
4037 | # Set suppress_flag, which will cause all subsequent calls to send_gdb and | |
4038 | # gdb_expect to fail immediately (until the next call to | |
4039 | # gdb_stop_suppressing_tests). | |
4040 | # | |
4041 | proc gdb_suppress_tests { args } { | |
4ec70201 | 4042 | global suppress_flag |
c906108c SS |
4043 | |
4044 | return; # fnf - disable pending review of results where | |
4045 | # testsuite ran better without this | |
4ec70201 | 4046 | incr suppress_flag |
c906108c SS |
4047 | |
4048 | if { $suppress_flag == 1 } { | |
4049 | if { [llength $args] > 0 } { | |
4ec70201 | 4050 | warning "[lindex $args 0]\n" |
c906108c | 4051 | } else { |
4ec70201 | 4052 | warning "Because of previous failure, all subsequent tests in this group will automatically fail.\n" |
c906108c SS |
4053 | } |
4054 | } | |
4055 | } | |
4056 | ||
4057 | # | |
4058 | # Clear suppress_flag. | |
4059 | # | |
4060 | proc gdb_stop_suppressing_tests { } { | |
4ec70201 | 4061 | global suppress_flag |
c906108c SS |
4062 | |
4063 | if [info exists suppress_flag] { | |
4064 | if { $suppress_flag > 0 } { | |
4ec70201 PA |
4065 | set suppress_flag 0 |
4066 | clone_output "Tests restarted.\n" | |
c906108c SS |
4067 | } |
4068 | } else { | |
4ec70201 | 4069 | set suppress_flag 0 |
c906108c SS |
4070 | } |
4071 | } | |
4072 | ||
4073 | proc gdb_clear_suppressed { } { | |
4ec70201 | 4074 | global suppress_flag |
c906108c | 4075 | |
4ec70201 | 4076 | set suppress_flag 0 |
c906108c SS |
4077 | } |
4078 | ||
94696ad3 PA |
4079 | # Spawn the gdb process. |
4080 | # | |
4081 | # This doesn't expect any output or do any other initialization, | |
4082 | # leaving those to the caller. | |
4083 | # | |
4084 | # Overridable function -- you can override this function in your | |
4085 | # baseboard file. | |
4086 | ||
4087 | proc gdb_spawn { } { | |
4088 | default_gdb_spawn | |
4089 | } | |
4090 | ||
98880d46 PA |
4091 | # Spawn GDB with CMDLINE_FLAGS appended to the GDBFLAGS global. |
4092 | ||
4093 | proc gdb_spawn_with_cmdline_opts { cmdline_flags } { | |
4094 | global GDBFLAGS | |
4095 | ||
4096 | set saved_gdbflags $GDBFLAGS | |
4097 | ||
0bbeccb1 PA |
4098 | if {$GDBFLAGS != ""} { |
4099 | append GDBFLAGS " " | |
4100 | } | |
98880d46 PA |
4101 | append GDBFLAGS $cmdline_flags |
4102 | ||
4103 | set res [gdb_spawn] | |
4104 | ||
4105 | set GDBFLAGS $saved_gdbflags | |
4106 | ||
4107 | return $res | |
4108 | } | |
4109 | ||
94696ad3 PA |
4110 | # Start gdb running, wait for prompt, and disable the pagers. |
4111 | ||
4112 | # Overridable function -- you can override this function in your | |
4113 | # baseboard file. | |
4114 | ||
c906108c SS |
4115 | proc gdb_start { } { |
4116 | default_gdb_start | |
4117 | } | |
4118 | ||
4119 | proc gdb_exit { } { | |
4120 | catch default_gdb_exit | |
4121 | } | |
4122 | ||
60b3033e PA |
4123 | # Return true if we can spawn a program on the target and attach to |
4124 | # it. | |
4125 | ||
4126 | proc can_spawn_for_attach { } { | |
2c8c5d37 PA |
4127 | # We use exp_pid to get the inferior's pid, assuming that gives |
4128 | # back the pid of the program. On remote boards, that would give | |
4129 | # us instead the PID of e.g., the ssh client, etc. | |
60b3033e PA |
4130 | if [is_remote target] then { |
4131 | return 0 | |
4132 | } | |
4133 | ||
4134 | # The "attach" command doesn't make sense when the target is | |
4135 | # stub-like, where GDB finds the program already started on | |
4136 | # initial connection. | |
4137 | if {[target_info exists use_gdb_stub]} { | |
4138 | return 0 | |
4139 | } | |
4140 | ||
4141 | # Assume yes. | |
4142 | return 1 | |
4143 | } | |
4144 | ||
2c8c5d37 PA |
4145 | # Kill a progress previously started with spawn_wait_for_attach, and |
4146 | # reap its wait status. PROC_SPAWN_ID is the spawn id associated with | |
4147 | # the process. | |
4148 | ||
4149 | proc kill_wait_spawned_process { proc_spawn_id } { | |
4150 | set pid [exp_pid -i $proc_spawn_id] | |
4151 | ||
4152 | verbose -log "killing ${pid}" | |
4153 | remote_exec build "kill -9 ${pid}" | |
4154 | ||
4155 | verbose -log "closing ${proc_spawn_id}" | |
4156 | catch "close -i $proc_spawn_id" | |
4157 | verbose -log "waiting for ${proc_spawn_id}" | |
4158 | ||
4159 | # If somehow GDB ends up still attached to the process here, a | |
4160 | # blocking wait hangs until gdb is killed (or until gdb / the | |
4161 | # ptracer reaps the exit status too, but that won't happen because | |
4162 | # something went wrong.) Passing -nowait makes expect tell Tcl to | |
4163 | # wait for the PID in the background. That's fine because we | |
4164 | # don't care about the exit status. */ | |
4165 | wait -nowait -i $proc_spawn_id | |
4166 | } | |
4167 | ||
4168 | # Returns the process id corresponding to the given spawn id. | |
4169 | ||
4170 | proc spawn_id_get_pid { spawn_id } { | |
4171 | set testpid [exp_pid -i $spawn_id] | |
4172 | ||
4173 | if { [istarget "*-*-cygwin*"] } { | |
4174 | # testpid is the Cygwin PID, GDB uses the Windows PID, which | |
4175 | # might be different due to the way fork/exec works. | |
4176 | set testpid [ exec ps -e | gawk "{ if (\$1 == $testpid) print \$4; }" ] | |
4177 | } | |
4178 | ||
4179 | return $testpid | |
4180 | } | |
4181 | ||
4c92ff2c | 4182 | # Start a set of programs running and then wait for a bit, to be sure |
2c8c5d37 PA |
4183 | # that they can be attached to. Return a list of processes spawn IDs, |
4184 | # one element for each process spawned. It's a test error to call | |
4185 | # this when [can_spawn_for_attach] is false. | |
4c92ff2c PA |
4186 | |
4187 | proc spawn_wait_for_attach { executable_list } { | |
2c8c5d37 | 4188 | set spawn_id_list {} |
4c92ff2c | 4189 | |
60b3033e PA |
4190 | if ![can_spawn_for_attach] { |
4191 | # The caller should have checked can_spawn_for_attach itself | |
4192 | # before getting here. | |
4193 | error "can't spawn for attach with this target/board" | |
4194 | } | |
4195 | ||
4c92ff2c | 4196 | foreach {executable} $executable_list { |
2c8c5d37 PA |
4197 | # Note we use Expect's spawn, not Tcl's exec, because with |
4198 | # spawn we control when to wait for/reap the process. That | |
4199 | # allows killing the process by PID without being subject to | |
4200 | # pid-reuse races. | |
4201 | lappend spawn_id_list [remote_spawn target $executable] | |
4c92ff2c PA |
4202 | } |
4203 | ||
4204 | sleep 2 | |
4205 | ||
2c8c5d37 | 4206 | return $spawn_id_list |
4c92ff2c PA |
4207 | } |
4208 | ||
e63b55d1 NS |
4209 | # |
4210 | # gdb_load_cmd -- load a file into the debugger. | |
4211 | # ARGS - additional args to load command. | |
4212 | # return a -1 if anything goes wrong. | |
4213 | # | |
4214 | proc gdb_load_cmd { args } { | |
4215 | global gdb_prompt | |
4216 | ||
4217 | if [target_info exists gdb_load_timeout] { | |
4218 | set loadtimeout [target_info gdb_load_timeout] | |
4219 | } else { | |
4220 | set loadtimeout 1600 | |
4221 | } | |
4222 | send_gdb "load $args\n" | |
e91528f0 | 4223 | verbose "Timeout is now $loadtimeout seconds" 2 |
e63b55d1 NS |
4224 | gdb_expect $loadtimeout { |
4225 | -re "Loading section\[^\r\]*\r\n" { | |
4226 | exp_continue | |
4227 | } | |
4228 | -re "Start address\[\r\]*\r\n" { | |
4229 | exp_continue | |
4230 | } | |
4231 | -re "Transfer rate\[\r\]*\r\n" { | |
4232 | exp_continue | |
4233 | } | |
4234 | -re "Memory access error\[^\r\]*\r\n" { | |
4235 | perror "Failed to load program" | |
4236 | return -1 | |
4237 | } | |
4238 | -re "$gdb_prompt $" { | |
4239 | return 0 | |
4240 | } | |
4241 | -re "(.*)\r\n$gdb_prompt " { | |
4242 | perror "Unexpected reponse from 'load' -- $expect_out(1,string)" | |
4243 | return -1 | |
4244 | } | |
4245 | timeout { | |
c4b347c7 | 4246 | perror "Timed out trying to load $args." |
e63b55d1 NS |
4247 | return -1 |
4248 | } | |
4249 | } | |
4250 | return -1 | |
4251 | } | |
4252 | ||
2d338fa9 TT |
4253 | # Invoke "gcore". CORE is the name of the core file to write. TEST |
4254 | # is the name of the test case. This will return 1 if the core file | |
4255 | # was created, 0 otherwise. If this fails to make a core file because | |
4256 | # this configuration of gdb does not support making core files, it | |
4257 | # will call "unsupported", not "fail". However, if this fails to make | |
4258 | # a core file for some other reason, then it will call "fail". | |
4259 | ||
4260 | proc gdb_gcore_cmd {core test} { | |
4261 | global gdb_prompt | |
4262 | ||
4263 | set result 0 | |
4264 | gdb_test_multiple "gcore $core" $test { | |
4265 | -re "Saved corefile .*\[\r\n\]+$gdb_prompt $" { | |
4266 | pass $test | |
4267 | set result 1 | |
4268 | } | |
bbe769cc | 4269 | -re "(?:Can't create a corefile|Target does not support core file generation\\.)\[\r\n\]+$gdb_prompt $" { |
2d338fa9 TT |
4270 | unsupported $test |
4271 | } | |
4272 | } | |
4273 | ||
4274 | return $result | |
4275 | } | |
4276 | ||
fac51dd9 DE |
4277 | # Load core file CORE. TEST is the name of the test case. |
4278 | # This will record a pass/fail for loading the core file. | |
4279 | # Returns: | |
4280 | # 1 - core file is successfully loaded | |
4281 | # 0 - core file loaded but has a non fatal error | |
4282 | # -1 - core file failed to load | |
4283 | ||
4284 | proc gdb_core_cmd { core test } { | |
4285 | global gdb_prompt | |
4286 | ||
4f424bb1 | 4287 | gdb_test_multiple "core $core" "$test" { |
fac51dd9 DE |
4288 | -re "\\\[Thread debugging using \[^ \r\n\]* enabled\\\]\r\n" { |
4289 | exp_continue | |
4290 | } | |
4291 | -re " is not a core dump:.*\r\n$gdb_prompt $" { | |
4f424bb1 | 4292 | fail "$test (bad file format)" |
fac51dd9 DE |
4293 | return -1 |
4294 | } | |
4295 | -re ": No such file or directory.*\r\n$gdb_prompt $" { | |
4f424bb1 | 4296 | fail "$test (file not found)" |
fac51dd9 DE |
4297 | return -1 |
4298 | } | |
4299 | -re "Couldn't find .* registers in core file.*\r\n$gdb_prompt $" { | |
4f424bb1 | 4300 | fail "$test (incomplete note section)" |
fac51dd9 DE |
4301 | return 0 |
4302 | } | |
4303 | -re "Core was generated by .*\r\n$gdb_prompt $" { | |
4f424bb1 | 4304 | pass "$test" |
fac51dd9 DE |
4305 | return 1 |
4306 | } | |
4307 | -re ".*$gdb_prompt $" { | |
4f424bb1 | 4308 | fail "$test" |
fac51dd9 DE |
4309 | return -1 |
4310 | } | |
4311 | timeout { | |
4f424bb1 | 4312 | fail "$test (timeout)" |
fac51dd9 DE |
4313 | return -1 |
4314 | } | |
4315 | } | |
4316 | fail "unsupported output from 'core' command" | |
4317 | return -1 | |
4318 | } | |
4319 | ||
759f0f0b PA |
4320 | # Return the filename to download to the target and load on the target |
4321 | # for this shared library. Normally just LIBNAME, unless shared libraries | |
4322 | # for this target have separate link and load images. | |
4323 | ||
4324 | proc shlib_target_file { libname } { | |
4325 | return $libname | |
4326 | } | |
4327 | ||
4328 | # Return the filename GDB will load symbols from when debugging this | |
4329 | # shared library. Normally just LIBNAME, unless shared libraries for | |
4330 | # this target have separate link and load images. | |
4331 | ||
4332 | proc shlib_symbol_file { libname } { | |
4333 | return $libname | |
4334 | } | |
4335 | ||
56744f0a JJ |
4336 | # Return the filename to download to the target and load for this |
4337 | # executable. Normally just BINFILE unless it is renamed to something | |
4338 | # else for this target. | |
4339 | ||
4340 | proc exec_target_file { binfile } { | |
4341 | return $binfile | |
4342 | } | |
4343 | ||
4344 | # Return the filename GDB will load symbols from when debugging this | |
4345 | # executable. Normally just BINFILE unless executables for this target | |
4346 | # have separate files for symbols. | |
4347 | ||
4348 | proc exec_symbol_file { binfile } { | |
4349 | return $binfile | |
4350 | } | |
4351 | ||
4352 | # Rename the executable file. Normally this is just BINFILE1 being renamed | |
4353 | # to BINFILE2, but some targets require multiple binary files. | |
4354 | proc gdb_rename_execfile { binfile1 binfile2 } { | |
faf067f1 JK |
4355 | file rename -force [exec_target_file ${binfile1}] \ |
4356 | [exec_target_file ${binfile2}] | |
56744f0a | 4357 | if { [exec_target_file ${binfile1}] != [exec_symbol_file ${binfile1}] } { |
faf067f1 JK |
4358 | file rename -force [exec_symbol_file ${binfile1}] \ |
4359 | [exec_symbol_file ${binfile2}] | |
56744f0a JJ |
4360 | } |
4361 | } | |
4362 | ||
4363 | # "Touch" the executable file to update the date. Normally this is just | |
4364 | # BINFILE, but some targets require multiple files. | |
4365 | proc gdb_touch_execfile { binfile } { | |
faf067f1 JK |
4366 | set time [clock seconds] |
4367 | file mtime [exec_target_file ${binfile}] $time | |
56744f0a | 4368 | if { [exec_target_file ${binfile}] != [exec_symbol_file ${binfile}] } { |
faf067f1 | 4369 | file mtime [exec_symbol_file ${binfile}] $time |
56744f0a JJ |
4370 | } |
4371 | } | |
4372 | ||
7817ea46 SM |
4373 | # Like remote_download but provides a gdb-specific behavior. |
4374 | # | |
4375 | # If the destination board is remote, the local file FROMFILE is transferred as | |
4376 | # usual with remote_download to TOFILE on the remote board. The destination | |
4377 | # filename is added to the CLEANFILES global, so it can be cleaned up at the | |
4378 | # end of the test. | |
4379 | # | |
4380 | # If the destination board is local, the destination path TOFILE is passed | |
4381 | # through standard_output_file, and FROMFILE is copied there. | |
4382 | # | |
4383 | # In both cases, if TOFILE is omitted, it defaults to the [file tail] of | |
4384 | # FROMFILE. | |
44ee8174 TT |
4385 | |
4386 | proc gdb_remote_download {dest fromfile {tofile {}}} { | |
7817ea46 SM |
4387 | # If TOFILE is not given, default to the same filename as FROMFILE. |
4388 | if {[string length $tofile] == 0} { | |
4389 | set tofile [file tail $fromfile] | |
44ee8174 | 4390 | } |
ce4ea2bb | 4391 | |
7817ea46 SM |
4392 | if {[is_remote $dest]} { |
4393 | # When the DEST is remote, we simply send the file to DEST. | |
4394 | global cleanfiles | |
44ee8174 | 4395 | |
7817ea46 SM |
4396 | set destname [remote_download $dest $fromfile $tofile] |
4397 | lappend cleanfiles $destname | |
93f02886 | 4398 | |
7817ea46 SM |
4399 | return $destname |
4400 | } else { | |
8392fa22 SM |
4401 | # When the DEST is local, we copy the file to the test directory (where |
4402 | # the executable is). | |
4403 | # | |
4404 | # Note that we pass TOFILE through standard_output_file, regardless of | |
4405 | # whether it is absolute or relative, because we don't want the tests | |
4406 | # to be able to write outside their standard output directory. | |
4407 | ||
7817ea46 | 4408 | set tofile [standard_output_file $tofile] |
93f02886 | 4409 | |
7817ea46 SM |
4410 | file copy -force $fromfile $tofile |
4411 | ||
4412 | return $tofile | |
4413 | } | |
93f02886 DJ |
4414 | } |
4415 | ||
d9019901 | 4416 | # gdb_load_shlib LIB... |
93f02886 | 4417 | # |
fca4cfd9 | 4418 | # Copy the listed library to the target. |
93f02886 | 4419 | |
d9019901 | 4420 | proc gdb_load_shlib { file } { |
c708f4d2 AB |
4421 | global gdb_spawn_id |
4422 | ||
4423 | if ![info exists gdb_spawn_id] { | |
4424 | perror "gdb_load_shlib: GDB is not running" | |
4425 | } | |
4426 | ||
fca4cfd9 | 4427 | set dest [gdb_remote_download target [shlib_target_file $file]] |
93f02886 | 4428 | |
6e774b13 SM |
4429 | if {[is_remote target]} { |
4430 | # If the target is remote, we need to tell gdb where to find the | |
4431 | # libraries. | |
4432 | # | |
4433 | # We could set this even when not testing remotely, but a user | |
4434 | # generally won't set it unless necessary. In order to make the tests | |
4435 | # more like the real-life scenarios, we don't set it for local testing. | |
fca4cfd9 | 4436 | gdb_test "set solib-search-path [file dirname $file]" "" "" |
6e774b13 | 4437 | } |
fca4cfd9 SM |
4438 | |
4439 | return $dest | |
93f02886 DJ |
4440 | } |
4441 | ||
c906108c | 4442 | # |
5b80f00d PA |
4443 | # gdb_load -- load a file into the debugger. Specifying no file |
4444 | # defaults to the executable currently being debugged. | |
7e60a48e | 4445 | # The return value is 0 for success, -1 for failure. |
2db8e78e | 4446 | # Many files in config/*.exp override this procedure. |
c906108c SS |
4447 | # |
4448 | proc gdb_load { arg } { | |
5b80f00d PA |
4449 | if { $arg != "" } { |
4450 | return [gdb_file_cmd $arg] | |
4451 | } | |
7e60a48e | 4452 | return 0 |
c906108c SS |
4453 | } |
4454 | ||
b741e217 DJ |
4455 | # gdb_reload -- load a file into the target. Called before "running", |
4456 | # either the first time or after already starting the program once, | |
4457 | # for remote targets. Most files that override gdb_load should now | |
4458 | # override this instead. | |
4459 | ||
4460 | proc gdb_reload { } { | |
4461 | # For the benefit of existing configurations, default to gdb_load. | |
4462 | # Specifying no file defaults to the executable currently being | |
4463 | # debugged. | |
4464 | return [gdb_load ""] | |
4465 | } | |
4466 | ||
c906108c SS |
4467 | proc gdb_continue { function } { |
4468 | global decimal | |
4469 | ||
ae59b1da | 4470 | return [gdb_test "continue" ".*Breakpoint $decimal, $function .*" "continue to $function"] |
c906108c SS |
4471 | } |
4472 | ||
73c9764f | 4473 | proc default_gdb_init { test_file_name } { |
277254ba | 4474 | global gdb_wrapper_initialized |
f6838f81 | 4475 | global gdb_wrapper_target |
0a6d0306 | 4476 | global gdb_test_file_name |
93f02886 | 4477 | global cleanfiles |
73c9764f | 4478 | global pf_prefix |
277254ba | 4479 | |
93f02886 DJ |
4480 | set cleanfiles {} |
4481 | ||
4ec70201 | 4482 | gdb_clear_suppressed |
c906108c | 4483 | |
73c9764f | 4484 | set gdb_test_file_name [file rootname [file tail $test_file_name]] |
0a6d0306 | 4485 | |
277254ba MS |
4486 | # Make sure that the wrapper is rebuilt |
4487 | # with the appropriate multilib option. | |
f6838f81 DJ |
4488 | if { $gdb_wrapper_target != [current_target_name] } { |
4489 | set gdb_wrapper_initialized 0 | |
4490 | } | |
277254ba | 4491 | |
7b433602 JB |
4492 | # Unlike most tests, we have a small number of tests that generate |
4493 | # a very large amount of output. We therefore increase the expect | |
ff604a67 MR |
4494 | # buffer size to be able to contain the entire test output. This |
4495 | # is especially needed by gdb.base/info-macros.exp. | |
4496 | match_max -d 65536 | |
8d417781 PM |
4497 | # Also set this value for the currently running GDB. |
4498 | match_max [match_max -d] | |
c906108c SS |
4499 | |
4500 | # We want to add the name of the TCL testcase to the PASS/FAIL messages. | |
73c9764f | 4501 | set pf_prefix "[file tail [file dirname $test_file_name]]/[file tail $test_file_name]:" |
c906108c | 4502 | |
4ec70201 | 4503 | global gdb_prompt |
c906108c | 4504 | if [target_info exists gdb_prompt] { |
4ec70201 | 4505 | set gdb_prompt [target_info gdb_prompt] |
c906108c SS |
4506 | } else { |
4507 | set gdb_prompt "\\(gdb\\)" | |
4508 | } | |
e11ac3a3 JK |
4509 | global use_gdb_stub |
4510 | if [info exists use_gdb_stub] { | |
4511 | unset use_gdb_stub | |
4512 | } | |
c906108c SS |
4513 | } |
4514 | ||
3d338901 DE |
4515 | # Return a path using GDB_PARALLEL. |
4516 | # ARGS is a list of path elements to append to "$objdir/$GDB_PARALLEL". | |
4517 | # GDB_PARALLEL must be defined, the caller must check. | |
4518 | # | |
4519 | # The default value for GDB_PARALLEL is, canonically, ".". | |
4520 | # The catch is that tests don't expect an additional "./" in file paths so | |
4521 | # omit any directory for the default case. | |
4522 | # GDB_PARALLEL is written as "yes" for the default case in Makefile.in to mark | |
4523 | # its special handling. | |
4524 | ||
4525 | proc make_gdb_parallel_path { args } { | |
4526 | global GDB_PARALLEL objdir | |
4527 | set joiner [list "file" "join" $objdir] | |
2151ccc5 | 4528 | if { [info exists GDB_PARALLEL] && $GDB_PARALLEL != "yes" } { |
3d338901 DE |
4529 | lappend joiner $GDB_PARALLEL |
4530 | } | |
4531 | set joiner [concat $joiner $args] | |
4532 | return [eval $joiner] | |
4533 | } | |
4534 | ||
0a6d0306 | 4535 | # Turn BASENAME into a full file name in the standard output |
8a3e1f8d TT |
4536 | # directory. It is ok if BASENAME is the empty string; in this case |
4537 | # the directory is returned. | |
0a6d0306 TT |
4538 | |
4539 | proc standard_output_file {basename} { | |
2151ccc5 | 4540 | global objdir subdir gdb_test_file_name |
0a6d0306 | 4541 | |
2151ccc5 SM |
4542 | set dir [make_gdb_parallel_path outputs $subdir $gdb_test_file_name] |
4543 | file mkdir $dir | |
4544 | return [file join $dir $basename] | |
0a6d0306 TT |
4545 | } |
4546 | ||
4e234898 TT |
4547 | # Return the name of a file in our standard temporary directory. |
4548 | ||
4549 | proc standard_temp_file {basename} { | |
c4ef31bf SM |
4550 | # Since a particular runtest invocation is only executing a single test |
4551 | # file at any given time, we can use the runtest pid to build the | |
4552 | # path of the temp directory. | |
4553 | set dir [make_gdb_parallel_path temp [pid]] | |
4554 | file mkdir $dir | |
4555 | return [file join $dir $basename] | |
4e234898 TT |
4556 | } |
4557 | ||
0a6d0306 TT |
4558 | # Set 'testfile', 'srcfile', and 'binfile'. |
4559 | # | |
4560 | # ARGS is a list of source file specifications. | |
4561 | # Without any arguments, the .exp file's base name is used to | |
4562 | # compute the source file name. The ".c" extension is added in this case. | |
4563 | # If ARGS is not empty, each entry is a source file specification. | |
4564 | # If the specification starts with a ".", it is treated as a suffix | |
4565 | # to append to the .exp file's base name. | |
4566 | # If the specification is the empty string, it is treated as if it | |
4567 | # were ".c". | |
4568 | # Otherwise it is a file name. | |
4569 | # The first file in the list is used to set the 'srcfile' global. | |
4570 | # Each subsequent name is used to set 'srcfile2', 'srcfile3', etc. | |
4571 | # | |
4572 | # Most tests should call this without arguments. | |
4573 | # | |
4574 | # If a completely different binary file name is needed, then it | |
4575 | # should be handled in the .exp file with a suitable comment. | |
4576 | ||
4577 | proc standard_testfile {args} { | |
4578 | global gdb_test_file_name | |
93c0ef37 | 4579 | global subdir |
686f09d0 | 4580 | global gdb_test_file_last_vars |
0a6d0306 TT |
4581 | |
4582 | # Outputs. | |
4583 | global testfile binfile | |
4584 | ||
4585 | set testfile $gdb_test_file_name | |
4586 | set binfile [standard_output_file ${testfile}] | |
4587 | ||
4588 | if {[llength $args] == 0} { | |
4589 | set args .c | |
4590 | } | |
4591 | ||
686f09d0 TT |
4592 | # Unset our previous output variables. |
4593 | # This can help catch hidden bugs. | |
4594 | if {[info exists gdb_test_file_last_vars]} { | |
4595 | foreach varname $gdb_test_file_last_vars { | |
4596 | global $varname | |
4597 | catch {unset $varname} | |
4598 | } | |
4599 | } | |
4600 | # 'executable' is often set by tests. | |
4601 | set gdb_test_file_last_vars {executable} | |
4602 | ||
0a6d0306 TT |
4603 | set suffix "" |
4604 | foreach arg $args { | |
4605 | set varname srcfile$suffix | |
4606 | global $varname | |
4607 | ||
4608 | # Handle an extension. | |
4609 | if {$arg == ""} { | |
4610 | set arg $testfile.c | |
4611 | } elseif {[string range $arg 0 0] == "."} { | |
4612 | set arg $testfile$arg | |
4613 | } | |
4614 | ||
4615 | set $varname $arg | |
686f09d0 | 4616 | lappend gdb_test_file_last_vars $varname |
0a6d0306 TT |
4617 | |
4618 | if {$suffix == ""} { | |
4619 | set suffix 2 | |
4620 | } else { | |
4621 | incr suffix | |
4622 | } | |
4623 | } | |
4624 | } | |
4625 | ||
7b356089 JB |
4626 | # The default timeout used when testing GDB commands. We want to use |
4627 | # the same timeout as the default dejagnu timeout, unless the user has | |
4628 | # already provided a specific value (probably through a site.exp file). | |
4629 | global gdb_test_timeout | |
4630 | if ![info exists gdb_test_timeout] { | |
4631 | set gdb_test_timeout $timeout | |
4632 | } | |
4633 | ||
47050449 JB |
4634 | # A list of global variables that GDB testcases should not use. |
4635 | # We try to prevent their use by monitoring write accesses and raising | |
4636 | # an error when that happens. | |
4637 | set banned_variables { bug_id prms_id } | |
4638 | ||
abcc4978 PA |
4639 | # A list of procedures that GDB testcases should not use. |
4640 | # We try to prevent their use by monitoring invocations and raising | |
4641 | # an error when that happens. | |
4642 | set banned_procedures { strace } | |
4643 | ||
41b2c92d PM |
4644 | # gdb_init is called by runtest at start, but also by several |
4645 | # tests directly; gdb_finish is only called from within runtest after | |
4646 | # each test source execution. | |
4647 | # Placing several traces by repetitive calls to gdb_init leads | |
4648 | # to problems, as only one trace is removed in gdb_finish. | |
4649 | # To overcome this possible problem, we add a variable that records | |
abcc4978 PA |
4650 | # if the banned variables and procedures are already traced. |
4651 | set banned_traced 0 | |
41b2c92d | 4652 | |
73c9764f | 4653 | proc gdb_init { test_file_name } { |
7b356089 JB |
4654 | # Reset the timeout value to the default. This way, any testcase |
4655 | # that changes the timeout value without resetting it cannot affect | |
4656 | # the timeout used in subsequent testcases. | |
4657 | global gdb_test_timeout | |
4658 | global timeout | |
4659 | set timeout $gdb_test_timeout | |
4660 | ||
8b696e31 YQ |
4661 | if { [regexp ".*gdb\.reverse\/.*" $test_file_name] |
4662 | && [target_info exists gdb_reverse_timeout] } { | |
4663 | set timeout [target_info gdb_reverse_timeout] | |
4664 | } | |
4665 | ||
5e92f71a TT |
4666 | # If GDB_INOTIFY is given, check for writes to '.'. This is a |
4667 | # debugging tool to help confirm that the test suite is | |
4668 | # parallel-safe. You need "inotifywait" from the | |
4669 | # inotify-tools package to use this. | |
4670 | global GDB_INOTIFY inotify_pid | |
4671 | if {[info exists GDB_INOTIFY] && ![info exists inotify_pid]} { | |
4672 | global outdir tool inotify_log_file | |
4673 | ||
4674 | set exclusions {outputs temp gdb[.](log|sum) cache} | |
4675 | set exclusion_re ([join $exclusions |]) | |
4676 | ||
4677 | set inotify_log_file [standard_temp_file inotify.out] | |
4678 | set inotify_pid [exec inotifywait -r -m -e move,create,delete . \ | |
4679 | --exclude $exclusion_re \ | |
4680 | |& tee -a $outdir/$tool.log $inotify_log_file &] | |
4681 | ||
4682 | # Wait for the watches; hopefully this is long enough. | |
4683 | sleep 2 | |
4684 | ||
4685 | # Clear the log so that we don't emit a warning the first time | |
4686 | # we check it. | |
4687 | set fd [open $inotify_log_file w] | |
4688 | close $fd | |
4689 | } | |
4690 | ||
abcc4978 PA |
4691 | # Block writes to all banned variables, and invocation of all |
4692 | # banned procedures... | |
47050449 | 4693 | global banned_variables |
abcc4978 PA |
4694 | global banned_procedures |
4695 | global banned_traced | |
4696 | if (!$banned_traced) { | |
41b2c92d PM |
4697 | foreach banned_var $banned_variables { |
4698 | global "$banned_var" | |
4699 | trace add variable "$banned_var" write error | |
4700 | } | |
abcc4978 PA |
4701 | foreach banned_proc $banned_procedures { |
4702 | global "$banned_proc" | |
4703 | trace add execution "$banned_proc" enter error | |
4704 | } | |
4705 | set banned_traced 1 | |
47050449 JB |
4706 | } |
4707 | ||
e7ab5e63 AB |
4708 | # We set LC_ALL, LC_CTYPE, and LANG to C so that we get the same |
4709 | # messages as expected. | |
c6f2ac43 | 4710 | setenv LC_ALL C |
e7ab5e63 | 4711 | setenv LC_CTYPE C |
c6f2ac43 PA |
4712 | setenv LANG C |
4713 | ||
e7ab5e63 AB |
4714 | # Don't let a .inputrc file or an existing setting of INPUTRC mess up |
4715 | # the test results. Even if /dev/null doesn't exist on the particular | |
4716 | # platform, the readline library will use the default setting just by | |
4717 | # failing to open the file. OTOH, opening /dev/null successfully will | |
4718 | # also result in the default settings being used since nothing will be | |
4719 | # read from this file. | |
4720 | setenv INPUTRC "/dev/null" | |
4721 | ||
4722 | # The gdb.base/readline.exp arrow key test relies on the standard VT100 | |
4723 | # bindings, so make sure that an appropriate terminal is selected. | |
4724 | # The same bug doesn't show up if we use ^P / ^N instead. | |
4725 | setenv TERM "vt100" | |
4726 | ||
4727 | # Some tests (for example gdb.base/maint.exp) shell out from gdb to use | |
e4b8388f | 4728 | # grep. Clear GREP_OPTIONS to make the behavior predictable, |
e7ab5e63 AB |
4729 | # especially having color output turned on can cause tests to fail. |
4730 | setenv GREP_OPTIONS "" | |
4731 | ||
03f2bd59 JK |
4732 | # Clear $gdbserver_reconnect_p. |
4733 | global gdbserver_reconnect_p | |
4734 | set gdbserver_reconnect_p 1 | |
4735 | unset gdbserver_reconnect_p | |
4736 | ||
73c9764f | 4737 | return [default_gdb_init $test_file_name] |
c906108c SS |
4738 | } |
4739 | ||
4740 | proc gdb_finish { } { | |
a35cfb40 MR |
4741 | global gdbserver_reconnect_p |
4742 | global gdb_prompt | |
93f02886 DJ |
4743 | global cleanfiles |
4744 | ||
4745 | # Exit first, so that the files are no longer in use. | |
4746 | gdb_exit | |
4747 | ||
4748 | if { [llength $cleanfiles] > 0 } { | |
4749 | eval remote_file target delete $cleanfiles | |
4750 | set cleanfiles {} | |
4751 | } | |
47050449 JB |
4752 | |
4753 | # Unblock write access to the banned variables. Dejagnu typically | |
4754 | # resets some of them between testcases. | |
4755 | global banned_variables | |
abcc4978 PA |
4756 | global banned_procedures |
4757 | global banned_traced | |
4758 | if ($banned_traced) { | |
41b2c92d PM |
4759 | foreach banned_var $banned_variables { |
4760 | global "$banned_var" | |
4761 | trace remove variable "$banned_var" write error | |
4762 | } | |
abcc4978 PA |
4763 | foreach banned_proc $banned_procedures { |
4764 | global "$banned_proc" | |
4765 | trace remove execution "$banned_proc" enter error | |
4766 | } | |
4767 | set banned_traced 0 | |
47050449 | 4768 | } |
c906108c SS |
4769 | } |
4770 | ||
4771 | global debug_format | |
7a292a7a | 4772 | set debug_format "unknown" |
c906108c SS |
4773 | |
4774 | # Run the gdb command "info source" and extract the debugging format | |
4775 | # information from the output and save it in debug_format. | |
4776 | ||
4777 | proc get_debug_format { } { | |
4778 | global gdb_prompt | |
4779 | global verbose | |
4780 | global expect_out | |
4781 | global debug_format | |
4782 | ||
4783 | set debug_format "unknown" | |
4784 | send_gdb "info source\n" | |
4785 | gdb_expect 10 { | |
919d772c | 4786 | -re "Compiled with (.*) debugging format.\r\n.*$gdb_prompt $" { |
c906108c SS |
4787 | set debug_format $expect_out(1,string) |
4788 | verbose "debug format is $debug_format" | |
ae59b1da | 4789 | return 1 |
c906108c SS |
4790 | } |
4791 | -re "No current source file.\r\n$gdb_prompt $" { | |
4792 | perror "get_debug_format used when no current source file" | |
ae59b1da | 4793 | return 0 |
c906108c SS |
4794 | } |
4795 | -re "$gdb_prompt $" { | |
4796 | warning "couldn't check debug format (no valid response)." | |
ae59b1da | 4797 | return 1 |
c906108c SS |
4798 | } |
4799 | timeout { | |
975531db | 4800 | warning "couldn't check debug format (timeout)." |
ae59b1da | 4801 | return 1 |
c906108c SS |
4802 | } |
4803 | } | |
4804 | } | |
4805 | ||
838ae6c4 JB |
4806 | # Return true if FORMAT matches the debug format the current test was |
4807 | # compiled with. FORMAT is a shell-style globbing pattern; it can use | |
4808 | # `*', `[...]', and so on. | |
4809 | # | |
4810 | # This function depends on variables set by `get_debug_format', above. | |
4811 | ||
4812 | proc test_debug_format {format} { | |
4813 | global debug_format | |
4814 | ||
4815 | return [expr [string match $format $debug_format] != 0] | |
4816 | } | |
4817 | ||
c906108c SS |
4818 | # Like setup_xfail, but takes the name of a debug format (DWARF 1, |
4819 | # COFF, stabs, etc). If that format matches the format that the | |
4820 | # current test was compiled with, then the next test is expected to | |
4821 | # fail for any target. Returns 1 if the next test or set of tests is | |
4822 | # expected to fail, 0 otherwise (or if it is unknown). Must have | |
4823 | # previously called get_debug_format. | |
b55a4771 | 4824 | proc setup_xfail_format { format } { |
4ec70201 | 4825 | set ret [test_debug_format $format] |
b55a4771 | 4826 | |
838ae6c4 | 4827 | if {$ret} then { |
b55a4771 MS |
4828 | setup_xfail "*-*-*" |
4829 | } | |
ae59b1da | 4830 | return $ret |
b55a4771 | 4831 | } |
c906108c | 4832 | |
c6fee705 MC |
4833 | # gdb_get_line_number TEXT [FILE] |
4834 | # | |
4835 | # Search the source file FILE, and return the line number of the | |
0d7941a9 | 4836 | # first line containing TEXT. If no match is found, an error is thrown. |
c6fee705 MC |
4837 | # |
4838 | # TEXT is a string literal, not a regular expression. | |
4839 | # | |
4840 | # The default value of FILE is "$srcdir/$subdir/$srcfile". If FILE is | |
4841 | # specified, and does not start with "/", then it is assumed to be in | |
4842 | # "$srcdir/$subdir". This is awkward, and can be fixed in the future, | |
4843 | # by changing the callers and the interface at the same time. | |
4844 | # In particular: gdb.base/break.exp, gdb.base/condbreak.exp, | |
4845 | # gdb.base/ena-dis-br.exp. | |
4846 | # | |
4847 | # Use this function to keep your test scripts independent of the | |
4848 | # exact line numbering of the source file. Don't write: | |
4849 | # | |
4850 | # send_gdb "break 20" | |
4851 | # | |
4852 | # This means that if anyone ever edits your test's source file, | |
4853 | # your test could break. Instead, put a comment like this on the | |
4854 | # source file line you want to break at: | |
4855 | # | |
4856 | # /* breakpoint spot: frotz.exp: test name */ | |
4857 | # | |
4858 | # and then write, in your test script (which we assume is named | |
4859 | # frotz.exp): | |
4860 | # | |
4861 | # send_gdb "break [gdb_get_line_number "frotz.exp: test name"]\n" | |
4862 | # | |
4863 | # (Yes, Tcl knows how to handle the nested quotes and brackets. | |
4864 | # Try this: | |
4865 | # $ tclsh | |
4866 | # % puts "foo [lindex "bar baz" 1]" | |
4867 | # foo baz | |
4868 | # % | |
4869 | # Tcl is quite clever, for a little stringy language.) | |
4870 | # | |
4871 | # === | |
4872 | # | |
4873 | # The previous implementation of this procedure used the gdb search command. | |
4874 | # This version is different: | |
4875 | # | |
4876 | # . It works with MI, and it also works when gdb is not running. | |
4877 | # | |
4878 | # . It operates on the build machine, not the host machine. | |
4879 | # | |
4880 | # . For now, this implementation fakes a current directory of | |
4881 | # $srcdir/$subdir to be compatible with the old implementation. | |
4882 | # This will go away eventually and some callers will need to | |
4883 | # be changed. | |
4884 | # | |
4885 | # . The TEXT argument is literal text and matches literally, | |
4886 | # not a regular expression as it was before. | |
4887 | # | |
4888 | # . State changes in gdb, such as changing the current file | |
4889 | # and setting $_, no longer happen. | |
4890 | # | |
4891 | # After a bit of time we can forget about the differences from the | |
4892 | # old implementation. | |
4893 | # | |
4894 | # --chastain 2004-08-05 | |
4895 | ||
4896 | proc gdb_get_line_number { text { file "" } } { | |
4897 | global srcdir | |
4898 | global subdir | |
4899 | global srcfile | |
c906108c | 4900 | |
c6fee705 MC |
4901 | if { "$file" == "" } then { |
4902 | set file "$srcfile" | |
4903 | } | |
4904 | if { ! [regexp "^/" "$file"] } then { | |
4905 | set file "$srcdir/$subdir/$file" | |
c906108c SS |
4906 | } |
4907 | ||
c6fee705 | 4908 | if { [ catch { set fd [open "$file"] } message ] } then { |
0d7941a9 | 4909 | error "$message" |
c906108c | 4910 | } |
c6fee705 MC |
4911 | |
4912 | set found -1 | |
4913 | for { set line 1 } { 1 } { incr line } { | |
4914 | if { [ catch { set nchar [gets "$fd" body] } message ] } then { | |
0d7941a9 | 4915 | error "$message" |
c6fee705 MC |
4916 | } |
4917 | if { $nchar < 0 } then { | |
4918 | break | |
4919 | } | |
4920 | if { [string first "$text" "$body"] >= 0 } then { | |
4921 | set found $line | |
4922 | break | |
4923 | } | |
4924 | } | |
4925 | ||
4926 | if { [ catch { close "$fd" } message ] } then { | |
0d7941a9 KS |
4927 | error "$message" |
4928 | } | |
4929 | ||
4930 | if {$found == -1} { | |
4931 | error "undefined tag \"$text\"" | |
c6fee705 MC |
4932 | } |
4933 | ||
4934 | return $found | |
c906108c SS |
4935 | } |
4936 | ||
b477a5e6 PA |
4937 | # Continue the program until it ends. |
4938 | # | |
fda326dd TT |
4939 | # MSSG is the error message that gets printed. If not given, a |
4940 | # default is used. | |
4941 | # COMMAND is the command to invoke. If not given, "continue" is | |
4942 | # used. | |
eceb0c5f TT |
4943 | # ALLOW_EXTRA is a flag indicating whether the test should expect |
4944 | # extra output between the "Continuing." line and the program | |
4945 | # exiting. By default it is zero; if nonzero, any extra output | |
4946 | # is accepted. | |
fda326dd | 4947 | |
eceb0c5f | 4948 | proc gdb_continue_to_end {{mssg ""} {command continue} {allow_extra 0}} { |
e11ac3a3 | 4949 | global inferior_exited_re use_gdb_stub |
7a292a7a | 4950 | |
fda326dd TT |
4951 | if {$mssg == ""} { |
4952 | set text "continue until exit" | |
4953 | } else { | |
4954 | set text "continue until exit at $mssg" | |
4955 | } | |
eceb0c5f TT |
4956 | if {$allow_extra} { |
4957 | set extra ".*" | |
4958 | } else { | |
4959 | set extra "" | |
4960 | } | |
b477a5e6 PA |
4961 | |
4962 | # By default, we don't rely on exit() behavior of remote stubs -- | |
4963 | # it's common for exit() to be implemented as a simple infinite | |
4964 | # loop, or a forced crash/reset. For native targets, by default, we | |
4965 | # assume process exit is reported as such. If a non-reliable target | |
4966 | # is used, we set a breakpoint at exit, and continue to that. | |
4967 | if { [target_info exists exit_is_reliable] } { | |
4968 | set exit_is_reliable [target_info exit_is_reliable] | |
4969 | } else { | |
4970 | set exit_is_reliable [expr ! $use_gdb_stub] | |
4971 | } | |
4972 | ||
4973 | if { ! $exit_is_reliable } { | |
7a292a7a SS |
4974 | if {![gdb_breakpoint "exit"]} { |
4975 | return 0 | |
4976 | } | |
eceb0c5f | 4977 | gdb_test $command "Continuing..*Breakpoint .*exit.*" \ |
fda326dd | 4978 | $text |
7a292a7a SS |
4979 | } else { |
4980 | # Continue until we exit. Should not stop again. | |
4981 | # Don't bother to check the output of the program, that may be | |
4982 | # extremely tough for some remote systems. | |
eceb0c5f TT |
4983 | gdb_test $command \ |
4984 | "Continuing.\[\r\n0-9\]+${extra}(... EXIT code 0\[\r\n\]+|$inferior_exited_re normally).*"\ | |
fda326dd | 4985 | $text |
7a292a7a SS |
4986 | } |
4987 | } | |
4988 | ||
4989 | proc rerun_to_main {} { | |
e11ac3a3 | 4990 | global gdb_prompt use_gdb_stub |
7a292a7a | 4991 | |
e11ac3a3 | 4992 | if $use_gdb_stub { |
7a292a7a SS |
4993 | gdb_run_cmd |
4994 | gdb_expect { | |
4995 | -re ".*Breakpoint .*main .*$gdb_prompt $"\ | |
4996 | {pass "rerun to main" ; return 0} | |
4997 | -re "$gdb_prompt $"\ | |
4998 | {fail "rerun to main" ; return 0} | |
4999 | timeout {fail "(timeout) rerun to main" ; return 0} | |
5000 | } | |
5001 | } else { | |
5002 | send_gdb "run\n" | |
5003 | gdb_expect { | |
11350d2a CV |
5004 | -re "The program .* has been started already.*y or n. $" { |
5005 | send_gdb "y\n" | |
5006 | exp_continue | |
5007 | } | |
7a292a7a SS |
5008 | -re "Starting program.*$gdb_prompt $"\ |
5009 | {pass "rerun to main" ; return 0} | |
5010 | -re "$gdb_prompt $"\ | |
5011 | {fail "rerun to main" ; return 0} | |
5012 | timeout {fail "(timeout) rerun to main" ; return 0} | |
5013 | } | |
5014 | } | |
5015 | } | |
c906108c | 5016 | |
27aba047 YQ |
5017 | # Return true if a test should be skipped due to lack of floating |
5018 | # point support or GDB can't fetch the contents from floating point | |
5019 | # registers. | |
13a5e3b8 | 5020 | |
27aba047 | 5021 | gdb_caching_proc gdb_skip_float_test { |
13a5e3b8 | 5022 | if [target_info exists gdb,skip_float_tests] { |
ae59b1da | 5023 | return 1 |
13a5e3b8 | 5024 | } |
27aba047 YQ |
5025 | |
5026 | # There is an ARM kernel ptrace bug that hardware VFP registers | |
5027 | # are not updated after GDB ptrace set VFP registers. The bug | |
5028 | # was introduced by kernel commit 8130b9d7b9d858aa04ce67805e8951e3cb6e9b2f | |
5029 | # in 2012 and is fixed in e2dfb4b880146bfd4b6aa8e138c0205407cebbaf | |
5030 | # in May 2016. In other words, kernels older than 4.6.3, 4.4.14, | |
5031 | # 4.1.27, 3.18.36, and 3.14.73 have this bug. | |
5032 | # This kernel bug is detected by check how does GDB change the | |
5033 | # program result by changing one VFP register. | |
5034 | if { [istarget "arm*-*-linux*"] } { | |
5035 | ||
5036 | set compile_flags {debug nowarnings } | |
5037 | ||
5038 | # Set up, compile, and execute a test program having VFP | |
5039 | # operations. | |
5040 | set src [standard_temp_file arm_vfp[pid].c] | |
5041 | set exe [standard_temp_file arm_vfp[pid].x] | |
5042 | ||
5043 | gdb_produce_source $src { | |
5044 | int main() { | |
5045 | double d = 4.0; | |
5046 | int ret; | |
5047 | ||
5048 | asm ("vldr d0, [%0]" : : "r" (&d)); | |
5049 | asm ("vldr d1, [%0]" : : "r" (&d)); | |
5050 | asm (".global break_here\n" | |
5051 | "break_here:"); | |
5052 | asm ("vcmp.f64 d0, d1\n" | |
5053 | "vmrs APSR_nzcv, fpscr\n" | |
5054 | "bne L_value_different\n" | |
5055 | "movs %0, #0\n" | |
5056 | "b L_end\n" | |
5057 | "L_value_different:\n" | |
5058 | "movs %0, #1\n" | |
5059 | "L_end:\n" : "=r" (ret) :); | |
5060 | ||
5061 | /* Return $d0 != $d1. */ | |
5062 | return ret; | |
5063 | } | |
5064 | } | |
5065 | ||
5066 | verbose "compiling testfile $src" 2 | |
5067 | set lines [gdb_compile $src $exe executable $compile_flags] | |
5068 | file delete $src | |
5069 | ||
5070 | if ![string match "" $lines] then { | |
5071 | verbose "testfile compilation failed, returning 1" 2 | |
5072 | return 0 | |
5073 | } | |
5074 | ||
5075 | # No error message, compilation succeeded so now run it via gdb. | |
5076 | # Run the test up to 5 times to detect whether ptrace can | |
5077 | # correctly update VFP registers or not. | |
5078 | set skip_vfp_test 0 | |
5079 | for {set i 0} {$i < 5} {incr i} { | |
5080 | global gdb_prompt srcdir subdir | |
5081 | ||
5082 | gdb_exit | |
5083 | gdb_start | |
5084 | gdb_reinitialize_dir $srcdir/$subdir | |
5085 | gdb_load "$exe" | |
5086 | ||
5087 | runto_main | |
5088 | gdb_test "break *break_here" | |
5089 | gdb_continue_to_breakpoint "break_here" | |
5090 | ||
5091 | # Modify $d0 to a different value, so the exit code should | |
5092 | # be 1. | |
5093 | gdb_test "set \$d0 = 5.0" | |
5094 | ||
5095 | set test "continue to exit" | |
5096 | gdb_test_multiple "continue" "$test" { | |
5097 | -re "exited with code 01.*$gdb_prompt $" { | |
5098 | } | |
5099 | -re "exited normally.*$gdb_prompt $" { | |
5100 | # However, the exit code is 0. That means something | |
5101 | # wrong in setting VFP registers. | |
5102 | set skip_vfp_test 1 | |
5103 | break | |
5104 | } | |
5105 | } | |
5106 | } | |
5107 | ||
5108 | gdb_exit | |
5109 | remote_file build delete $exe | |
5110 | ||
5111 | return $skip_vfp_test | |
5112 | } | |
ae59b1da | 5113 | return 0 |
13a5e3b8 MS |
5114 | } |
5115 | ||
5116 | # Print a message and return true if a test should be skipped | |
5117 | # due to lack of stdio support. | |
5118 | ||
5119 | proc gdb_skip_stdio_test { msg } { | |
5120 | if [target_info exists gdb,noinferiorio] { | |
4ec70201 | 5121 | verbose "Skipping test '$msg': no inferior i/o." |
ae59b1da | 5122 | return 1 |
13a5e3b8 | 5123 | } |
ae59b1da | 5124 | return 0 |
13a5e3b8 MS |
5125 | } |
5126 | ||
5127 | proc gdb_skip_bogus_test { msg } { | |
ae59b1da | 5128 | return 0 |
13a5e3b8 MS |
5129 | } |
5130 | ||
e515b470 DJ |
5131 | # Return true if a test should be skipped due to lack of XML support |
5132 | # in the host GDB. | |
d0ef5df8 | 5133 | # NOTE: This must be called while gdb is *not* running. |
e515b470 | 5134 | |
17e1c970 | 5135 | gdb_caching_proc gdb_skip_xml_test { |
787f0025 | 5136 | global gdb_spawn_id |
e515b470 DJ |
5137 | global gdb_prompt |
5138 | global srcdir | |
e515b470 | 5139 | |
787f0025 MM |
5140 | if { [info exists gdb_spawn_id] } { |
5141 | error "GDB must not be running in gdb_skip_xml_tests." | |
5142 | } | |
5143 | ||
b22089ab YQ |
5144 | set xml_file [gdb_remote_download host "${srcdir}/gdb.xml/trivial.xml"] |
5145 | ||
e515b470 | 5146 | gdb_start |
17e1c970 | 5147 | set xml_missing 0 |
b22089ab | 5148 | gdb_test_multiple "set tdesc filename $xml_file" "" { |
e515b470 | 5149 | -re ".*XML support was disabled at compile time.*$gdb_prompt $" { |
17e1c970 | 5150 | set xml_missing 1 |
e515b470 DJ |
5151 | } |
5152 | -re ".*$gdb_prompt $" { } | |
5153 | } | |
5154 | gdb_exit | |
17e1c970 | 5155 | return $xml_missing |
e515b470 | 5156 | } |
1f8a6abb | 5157 | |
673dc4a0 YQ |
5158 | # Return true if argv[0] is available. |
5159 | ||
5160 | gdb_caching_proc gdb_has_argv0 { | |
5161 | set result 0 | |
5162 | ||
bf326452 AH |
5163 | # Compile and execute a test program to check whether argv[0] is available. |
5164 | gdb_simple_compile has_argv0 { | |
673dc4a0 YQ |
5165 | int main (int argc, char **argv) { |
5166 | return 0; | |
5167 | } | |
bf326452 | 5168 | } executable |
673dc4a0 | 5169 | |
673dc4a0 YQ |
5170 | |
5171 | # Helper proc. | |
5172 | proc gdb_has_argv0_1 { exe } { | |
5173 | global srcdir subdir | |
5174 | global gdb_prompt hex | |
5175 | ||
5176 | gdb_exit | |
5177 | gdb_start | |
5178 | gdb_reinitialize_dir $srcdir/$subdir | |
5179 | gdb_load "$exe" | |
5180 | ||
5181 | # Set breakpoint on main. | |
5182 | gdb_test_multiple "break main" "break main" { | |
5183 | -re "Breakpoint.*${gdb_prompt} $" { | |
5184 | } | |
5185 | -re "${gdb_prompt} $" { | |
5186 | return 0 | |
5187 | } | |
5188 | } | |
5189 | ||
5190 | # Run to main. | |
5191 | gdb_run_cmd | |
5192 | gdb_test_multiple "" "run to main" { | |
5193 | -re "Breakpoint.*${gdb_prompt} $" { | |
5194 | } | |
5195 | -re "${gdb_prompt} $" { | |
5196 | return 0 | |
5197 | } | |
5198 | } | |
5199 | ||
c0ecb95f JK |
5200 | set old_elements "200" |
5201 | set test "show print elements" | |
5202 | gdb_test_multiple $test $test { | |
5203 | -re "Limit on string chars or array elements to print is (\[^\r\n\]+)\\.\r\n$gdb_prompt $" { | |
5204 | set old_elements $expect_out(1,string) | |
5205 | } | |
5206 | } | |
5207 | set old_repeats "200" | |
5208 | set test "show print repeats" | |
5209 | gdb_test_multiple $test $test { | |
5210 | -re "Threshold for repeated print elements is (\[^\r\n\]+)\\.\r\n$gdb_prompt $" { | |
5211 | set old_repeats $expect_out(1,string) | |
5212 | } | |
5213 | } | |
5214 | gdb_test_no_output "set print elements unlimited" "" | |
5215 | gdb_test_no_output "set print repeats unlimited" "" | |
5216 | ||
5217 | set retval 0 | |
673dc4a0 YQ |
5218 | # Check whether argc is 1. |
5219 | gdb_test_multiple "p argc" "p argc" { | |
5220 | -re " = 1\r\n${gdb_prompt} $" { | |
5221 | ||
5222 | gdb_test_multiple "p argv\[0\]" "p argv\[0\]" { | |
5223 | -re " = $hex \".*[file tail $exe]\"\r\n${gdb_prompt} $" { | |
c0ecb95f | 5224 | set retval 1 |
673dc4a0 YQ |
5225 | } |
5226 | -re "${gdb_prompt} $" { | |
673dc4a0 YQ |
5227 | } |
5228 | } | |
5229 | } | |
5230 | -re "${gdb_prompt} $" { | |
673dc4a0 YQ |
5231 | } |
5232 | } | |
c0ecb95f JK |
5233 | |
5234 | gdb_test_no_output "set print elements $old_elements" "" | |
5235 | gdb_test_no_output "set print repeats $old_repeats" "" | |
5236 | ||
5237 | return $retval | |
673dc4a0 YQ |
5238 | } |
5239 | ||
bf326452 | 5240 | set result [gdb_has_argv0_1 $obj] |
673dc4a0 YQ |
5241 | |
5242 | gdb_exit | |
bf326452 | 5243 | file delete $obj |
673dc4a0 YQ |
5244 | |
5245 | if { !$result | |
5246 | && ([istarget *-*-linux*] | |
5247 | || [istarget *-*-freebsd*] || [istarget *-*-kfreebsd*] | |
5248 | || [istarget *-*-netbsd*] || [istarget *-*-knetbsd*] | |
5249 | || [istarget *-*-openbsd*] | |
5250 | || [istarget *-*-darwin*] | |
5251 | || [istarget *-*-solaris*] | |
5252 | || [istarget *-*-aix*] | |
5253 | || [istarget *-*-gnu*] | |
5254 | || [istarget *-*-cygwin*] || [istarget *-*-mingw32*] | |
5255 | || [istarget *-*-*djgpp*] || [istarget *-*-go32*] | |
5256 | || [istarget *-wince-pe] || [istarget *-*-mingw32ce*] | |
5257 | || [istarget *-*-symbianelf*] | |
5258 | || [istarget *-*-osf*] | |
673dc4a0 YQ |
5259 | || [istarget *-*-dicos*] |
5260 | || [istarget *-*-nto*] | |
5261 | || [istarget *-*-*vms*] | |
5262 | || [istarget *-*-lynx*178]) } { | |
5263 | fail "argv\[0\] should be available on this target" | |
5264 | } | |
5265 | ||
5266 | return $result | |
5267 | } | |
5268 | ||
1f8a6abb EZ |
5269 | # Note: the procedure gdb_gnu_strip_debug will produce an executable called |
5270 | # ${binfile}.dbglnk, which is just like the executable ($binfile) but without | |
5271 | # the debuginfo. Instead $binfile has a .gnu_debuglink section which contains | |
8e1d0c49 JK |
5272 | # the name of a debuginfo only file. This file will be stored in the same |
5273 | # subdirectory. | |
1f8a6abb EZ |
5274 | |
5275 | # Functions for separate debug info testing | |
5276 | ||
5277 | # starting with an executable: | |
5278 | # foo --> original executable | |
5279 | ||
5280 | # at the end of the process we have: | |
5281 | # foo.stripped --> foo w/o debug info | |
8e1d0c49 | 5282 | # foo.debug --> foo's debug info |
1f8a6abb EZ |
5283 | # foo --> like foo, but with a new .gnu_debuglink section pointing to foo.debug. |
5284 | ||
7c50a931 DE |
5285 | # Fetch the build id from the file. |
5286 | # Returns "" if there is none. | |
5287 | ||
5288 | proc get_build_id { filename } { | |
c74f7d1c JT |
5289 | if { ([istarget "*-*-mingw*"] |
5290 | || [istarget *-*-cygwin*]) } { | |
5291 | set objdump_program [gdb_find_objdump] | |
5292 | set result [catch {set data [exec $objdump_program -p $filename | grep signature | cut "-d " -f4]} output] | |
5293 | verbose "result is $result" | |
5294 | verbose "output is $output" | |
5295 | if {$result == 1} { | |
5296 | return "" | |
5297 | } | |
5298 | return $data | |
92046791 | 5299 | } else { |
c74f7d1c JT |
5300 | set tmp [standard_output_file "${filename}-tmp"] |
5301 | set objcopy_program [gdb_find_objcopy] | |
5302 | set result [catch "exec $objcopy_program -j .note.gnu.build-id -O binary $filename $tmp" output] | |
5303 | verbose "result is $result" | |
5304 | verbose "output is $output" | |
5305 | if {$result == 1} { | |
5306 | return "" | |
5307 | } | |
5308 | set fi [open $tmp] | |
5309 | fconfigure $fi -translation binary | |
5310 | # Skip the NOTE header. | |
5311 | read $fi 16 | |
5312 | set data [read $fi] | |
5313 | close $fi | |
5314 | file delete $tmp | |
5315 | if ![string compare $data ""] then { | |
5316 | return "" | |
5317 | } | |
5318 | # Convert it to hex. | |
5319 | binary scan $data H* data | |
5320 | return $data | |
4935890f | 5321 | } |
7c50a931 DE |
5322 | } |
5323 | ||
5324 | # Return the build-id hex string (usually 160 bits as 40 hex characters) | |
5325 | # converted to the form: .build-id/ab/cdef1234...89.debug | |
5326 | # Return "" if no build-id found. | |
5327 | proc build_id_debug_filename_get { filename } { | |
5328 | set data [get_build_id $filename] | |
5329 | if { $data == "" } { | |
5330 | return "" | |
5331 | } | |
061b5285 | 5332 | regsub {^..} $data {\0/} data |
ae59b1da | 5333 | return ".build-id/${data}.debug" |
4935890f JK |
5334 | } |
5335 | ||
94277a38 DJ |
5336 | # Create stripped files for DEST, replacing it. If ARGS is passed, it is a |
5337 | # list of optional flags. The only currently supported flag is no-main, | |
5338 | # which removes the symbol entry for main from the separate debug file. | |
c0201579 JK |
5339 | # |
5340 | # Function returns zero on success. Function will return non-zero failure code | |
5341 | # on some targets not supporting separate debug info (such as i386-msdos). | |
1f8a6abb | 5342 | |
94277a38 DJ |
5343 | proc gdb_gnu_strip_debug { dest args } { |
5344 | ||
8e1d0c49 JK |
5345 | # Use the first separate debug info file location searched by GDB so the |
5346 | # run cannot be broken by some stale file searched with higher precedence. | |
5347 | set debug_file "${dest}.debug" | |
5348 | ||
b741e217 | 5349 | set strip_to_file_program [transform strip] |
4fa7d390 | 5350 | set objcopy_program [gdb_find_objcopy] |
1f8a6abb | 5351 | |
1f8a6abb EZ |
5352 | set debug_link [file tail $debug_file] |
5353 | set stripped_file "${dest}.stripped" | |
5354 | ||
5355 | # Get rid of the debug info, and store result in stripped_file | |
5356 | # something like gdb/testsuite/gdb.base/blah.stripped. | |
5357 | set result [catch "exec $strip_to_file_program --strip-debug ${dest} -o ${stripped_file}" output] | |
5358 | verbose "result is $result" | |
5359 | verbose "output is $output" | |
5360 | if {$result == 1} { | |
5361 | return 1 | |
5362 | } | |
5363 | ||
d521f563 JK |
5364 | # Workaround PR binutils/10802: |
5365 | # Preserve the 'x' bit also for PIEs (Position Independent Executables). | |
5366 | set perm [file attributes ${dest} -permissions] | |
5367 | file attributes ${stripped_file} -permissions $perm | |
5368 | ||
1f8a6abb EZ |
5369 | # Get rid of everything but the debug info, and store result in debug_file |
5370 | # This will be in the .debug subdirectory, see above. | |
5371 | set result [catch "exec $strip_to_file_program --only-keep-debug ${dest} -o ${debug_file}" output] | |
5372 | verbose "result is $result" | |
5373 | verbose "output is $output" | |
5374 | if {$result == 1} { | |
5375 | return 1 | |
5376 | } | |
5377 | ||
94277a38 DJ |
5378 | # If no-main is passed, strip the symbol for main from the separate |
5379 | # file. This is to simulate the behavior of elfutils's eu-strip, which | |
5380 | # leaves the symtab in the original file only. There's no way to get | |
5381 | # objcopy or strip to remove the symbol table without also removing the | |
5382 | # debugging sections, so this is as close as we can get. | |
5383 | if { [llength $args] == 1 && [lindex $args 0] == "no-main" } { | |
5384 | set result [catch "exec $objcopy_program -N main ${debug_file} ${debug_file}-tmp" output] | |
5385 | verbose "result is $result" | |
5386 | verbose "output is $output" | |
5387 | if {$result == 1} { | |
5388 | return 1 | |
5389 | } | |
5390 | file delete "${debug_file}" | |
5391 | file rename "${debug_file}-tmp" "${debug_file}" | |
5392 | } | |
5393 | ||
1f8a6abb EZ |
5394 | # Link the two previous output files together, adding the .gnu_debuglink |
5395 | # section to the stripped_file, containing a pointer to the debug_file, | |
5396 | # save the new file in dest. | |
5397 | # This will be the regular executable filename, in the usual location. | |
5398 | set result [catch "exec $objcopy_program --add-gnu-debuglink=${debug_file} ${stripped_file} ${dest}" output] | |
5399 | verbose "result is $result" | |
5400 | verbose "output is $output" | |
5401 | if {$result == 1} { | |
5402 | return 1 | |
5403 | } | |
5404 | ||
d521f563 JK |
5405 | # Workaround PR binutils/10802: |
5406 | # Preserve the 'x' bit also for PIEs (Position Independent Executables). | |
5407 | set perm [file attributes ${stripped_file} -permissions] | |
5408 | file attributes ${dest} -permissions $perm | |
5409 | ||
5410 | return 0 | |
1f8a6abb EZ |
5411 | } |
5412 | ||
d8295fe9 VP |
5413 | # Test the output of GDB_COMMAND matches the pattern obtained |
5414 | # by concatenating all elements of EXPECTED_LINES. This makes | |
5415 | # it possible to split otherwise very long string into pieces. | |
5416 | # If third argument is not empty, it's used as the name of the | |
5417 | # test to be printed on pass/fail. | |
5418 | proc help_test_raw { gdb_command expected_lines args } { | |
5419 | set message $gdb_command | |
5420 | if [llength $args]>0 then { | |
5421 | set message [lindex $args 0] | |
5422 | } | |
5423 | set expected_output [join $expected_lines ""] | |
5424 | gdb_test "${gdb_command}" "${expected_output}" $message | |
5425 | } | |
5426 | ||
6aee0d90 | 5427 | # Test the output of "help COMMAND_CLASS". EXPECTED_INITIAL_LINES |
d8295fe9 VP |
5428 | # are regular expressions that should match the beginning of output, |
5429 | # before the list of commands in that class. The presence of | |
5430 | # command list and standard epilogue will be tested automatically. | |
06f810bd MG |
5431 | # Notice that the '[' and ']' characters don't need to be escaped for strings |
5432 | # wrapped in {} braces. | |
d8295fe9 VP |
5433 | proc test_class_help { command_class expected_initial_lines args } { |
5434 | set l_stock_body { | |
06f810bd MG |
5435 | "List of commands\:.*[\r\n]+" |
5436 | "Type \"help\" followed by command name for full documentation\.[\r\n]+" | |
5437 | "Type \"apropos word\" to search for commands related to \"word\"\.[\r\n]+" | |
d8295fe9 VP |
5438 | "Command name abbreviations are allowed if unambiguous\." |
5439 | } | |
5440 | set l_entire_body [concat $expected_initial_lines $l_stock_body] | |
5441 | ||
5442 | eval [list help_test_raw "help ${command_class}" $l_entire_body] $args | |
5443 | } | |
5444 | ||
5445 | # COMMAND_LIST should have either one element -- command to test, or | |
5446 | # two elements -- abbreviated command to test, and full command the first | |
5447 | # element is abbreviation of. | |
5448 | # The command must be a prefix command. EXPECTED_INITIAL_LINES | |
5449 | # are regular expressions that should match the beginning of output, | |
5450 | # before the list of subcommands. The presence of | |
5451 | # subcommand list and standard epilogue will be tested automatically. | |
5452 | proc test_prefix_command_help { command_list expected_initial_lines args } { | |
5453 | set command [lindex $command_list 0] | |
5454 | if {[llength $command_list]>1} { | |
5455 | set full_command [lindex $command_list 1] | |
5456 | } else { | |
5457 | set full_command $command | |
5458 | } | |
5459 | # Use 'list' and not just {} because we want variables to | |
5460 | # be expanded in this list. | |
5461 | set l_stock_body [list\ | |
5462 | "List of $full_command subcommands\:.*\[\r\n\]+"\ | |
5463 | "Type \"help $full_command\" followed by $full_command subcommand name for full documentation\.\[\r\n\]+"\ | |
5464 | "Type \"apropos word\" to search for commands related to \"word\"\.\[\r\n\]+"\ | |
5465 | "Command name abbreviations are allowed if unambiguous\."] | |
5466 | set l_entire_body [concat $expected_initial_lines $l_stock_body] | |
5467 | if {[llength $args]>0} { | |
5468 | help_test_raw "help ${command}" $l_entire_body [lindex $args 0] | |
5469 | } else { | |
5470 | help_test_raw "help ${command}" $l_entire_body | |
5471 | } | |
5472 | } | |
dbc52822 | 5473 | |
85b4440a TT |
5474 | # Build executable named EXECUTABLE from specifications that allow |
5475 | # different options to be passed to different sub-compilations. | |
5476 | # TESTNAME is the name of the test; this is passed to 'untested' if | |
5477 | # something fails. | |
a0d3f2f5 SCR |
5478 | # OPTIONS is passed to the final link, using gdb_compile. If OPTIONS |
5479 | # contains the option "pthreads", then gdb_compile_pthreads is used. | |
85b4440a TT |
5480 | # ARGS is a flat list of source specifications, of the form: |
5481 | # { SOURCE1 OPTIONS1 [ SOURCE2 OPTIONS2 ]... } | |
5482 | # Each SOURCE is compiled to an object file using its OPTIONS, | |
5483 | # using gdb_compile. | |
5484 | # Returns 0 on success, -1 on failure. | |
5485 | proc build_executable_from_specs {testname executable options args} { | |
dbc52822 VP |
5486 | global subdir |
5487 | global srcdir | |
dbc52822 | 5488 | |
0a6d0306 | 5489 | set binfile [standard_output_file $executable] |
dbc52822 | 5490 | |
fd961404 DE |
5491 | set info_options "" |
5492 | if { [lsearch -exact $options "c++"] >= 0 } { | |
5493 | set info_options "c++" | |
5494 | } | |
4c93b1db | 5495 | if [get_compiler_info ${info_options}] { |
dbc52822 VP |
5496 | return -1 |
5497 | } | |
a29a3fb7 | 5498 | |
a29a3fb7 GB |
5499 | set func gdb_compile |
5500 | set func_index [lsearch -regexp $options {^(pthreads|shlib|shlib_pthreads)$}] | |
5501 | if {$func_index != -1} { | |
5502 | set func "${func}_[lindex $options $func_index]" | |
5503 | } | |
5504 | ||
5505 | # gdb_compile_shlib and gdb_compile_shlib_pthreads do not use the 3rd | |
5506 | # parameter. They also requires $sources while gdb_compile and | |
5507 | # gdb_compile_pthreads require $objects. Moreover they ignore any options. | |
5508 | if [string match gdb_compile_shlib* $func] { | |
5509 | set sources_path {} | |
5510 | foreach {s local_options} $args { | |
0e5c4555 AA |
5511 | if { [regexp "^/" "$s"] } then { |
5512 | lappend sources_path "$s" | |
5513 | } else { | |
5514 | lappend sources_path "$srcdir/$subdir/$s" | |
5515 | } | |
a29a3fb7 GB |
5516 | } |
5517 | set ret [$func $sources_path "${binfile}" $options] | |
67218854 TT |
5518 | } elseif {[lsearch -exact $options rust] != -1} { |
5519 | set sources_path {} | |
5520 | foreach {s local_options} $args { | |
5521 | if { [regexp "^/" "$s"] } then { | |
5522 | lappend sources_path "$s" | |
5523 | } else { | |
5524 | lappend sources_path "$srcdir/$subdir/$s" | |
5525 | } | |
5526 | } | |
5527 | set ret [gdb_compile_rust $sources_path "${binfile}" $options] | |
a29a3fb7 GB |
5528 | } else { |
5529 | set objects {} | |
5530 | set i 0 | |
5531 | foreach {s local_options} $args { | |
0e5c4555 AA |
5532 | if { ! [regexp "^/" "$s"] } then { |
5533 | set s "$srcdir/$subdir/$s" | |
5534 | } | |
5535 | if { [gdb_compile "${s}" "${binfile}${i}.o" object $local_options] != "" } { | |
a29a3fb7 GB |
5536 | untested $testname |
5537 | return -1 | |
5538 | } | |
5539 | lappend objects "${binfile}${i}.o" | |
5540 | incr i | |
5541 | } | |
5542 | set ret [$func $objects "${binfile}" executable $options] | |
5543 | } | |
5544 | if { $ret != "" } { | |
5545 | untested $testname | |
5546 | return -1 | |
5547 | } | |
5548 | ||
dbc52822 VP |
5549 | return 0 |
5550 | } | |
5551 | ||
85b4440a TT |
5552 | # Build executable named EXECUTABLE, from SOURCES. If SOURCES are not |
5553 | # provided, uses $EXECUTABLE.c. The TESTNAME paramer is the name of test | |
5554 | # to pass to untested, if something is wrong. OPTIONS are passed | |
5555 | # to gdb_compile directly. | |
5556 | proc build_executable { testname executable {sources ""} {options {debug}} } { | |
5557 | if {[llength $sources]==0} { | |
5558 | set sources ${executable}.c | |
5559 | } | |
5560 | ||
5561 | set arglist [list $testname $executable $options] | |
5562 | foreach source $sources { | |
5563 | lappend arglist $source $options | |
5564 | } | |
5565 | ||
5566 | return [eval build_executable_from_specs $arglist] | |
5567 | } | |
5568 | ||
7b606f95 DE |
5569 | # Starts fresh GDB binary and loads an optional executable into GDB. |
5570 | # Usage: clean_restart [executable] | |
5571 | # EXECUTABLE is the basename of the binary. | |
5572 | ||
5573 | proc clean_restart { args } { | |
dbc52822 | 5574 | global srcdir |
dbc52822 | 5575 | global subdir |
7b606f95 DE |
5576 | |
5577 | if { [llength $args] > 1 } { | |
5578 | error "bad number of args: [llength $args]" | |
5579 | } | |
dbc52822 VP |
5580 | |
5581 | gdb_exit | |
5582 | gdb_start | |
5583 | gdb_reinitialize_dir $srcdir/$subdir | |
7b606f95 DE |
5584 | |
5585 | if { [llength $args] >= 1 } { | |
5586 | set executable [lindex $args 0] | |
5587 | set binfile [standard_output_file ${executable}] | |
5588 | gdb_load ${binfile} | |
5589 | } | |
dbc52822 VP |
5590 | } |
5591 | ||
85b4440a TT |
5592 | # Prepares for testing by calling build_executable_full, then |
5593 | # clean_restart. | |
5594 | # TESTNAME is the name of the test. | |
5595 | # Each element in ARGS is a list of the form | |
5596 | # { EXECUTABLE OPTIONS SOURCE_SPEC... } | |
5597 | # These are passed to build_executable_from_specs, which see. | |
5598 | # The last EXECUTABLE is passed to clean_restart. | |
5599 | # Returns 0 on success, non-zero on failure. | |
5600 | proc prepare_for_testing_full {testname args} { | |
5601 | foreach spec $args { | |
5602 | if {[eval build_executable_from_specs [list $testname] $spec] == -1} { | |
5603 | return -1 | |
5604 | } | |
5605 | set executable [lindex $spec 0] | |
5606 | } | |
5607 | clean_restart $executable | |
5608 | return 0 | |
5609 | } | |
5610 | ||
dbc52822 VP |
5611 | # Prepares for testing, by calling build_executable, and then clean_restart. |
5612 | # Please refer to build_executable for parameter description. | |
5613 | proc prepare_for_testing { testname executable {sources ""} {options {debug}}} { | |
5614 | ||
734a5c36 | 5615 | if {[build_executable $testname $executable $sources $options] == -1} { |
dbc52822 VP |
5616 | return -1 |
5617 | } | |
5618 | clean_restart $executable | |
5619 | ||
5620 | return 0 | |
5621 | } | |
7065b901 | 5622 | |
0efcde63 AK |
5623 | # Retrieve the value of EXP in the inferior, represented in format |
5624 | # specified in FMT (using "printFMT"). DEFAULT is used as fallback if | |
5625 | # print fails. TEST is the test message to use. It can be omitted, | |
5626 | # in which case a test message is built from EXP. | |
5627 | ||
5628 | proc get_valueof { fmt exp default {test ""} } { | |
7065b901 TT |
5629 | global gdb_prompt |
5630 | ||
0efcde63 AK |
5631 | if {$test == "" } { |
5632 | set test "get valueof \"${exp}\"" | |
5633 | } | |
5634 | ||
7065b901 TT |
5635 | set val ${default} |
5636 | gdb_test_multiple "print${fmt} ${exp}" "$test" { | |
c2c2dd9f | 5637 | -re "\\$\[0-9\]* = (\[^\r\n\]*)\[\r\n\]*$gdb_prompt $" { |
417e16e2 | 5638 | set val $expect_out(1,string) |
1443936e | 5639 | pass "$test" |
417e16e2 PM |
5640 | } |
5641 | timeout { | |
5642 | fail "$test (timeout)" | |
5643 | } | |
5644 | } | |
5645 | return ${val} | |
5646 | } | |
5647 | ||
0efcde63 AK |
5648 | # Retrieve the value of EXP in the inferior, as a signed decimal value |
5649 | # (using "print /d"). DEFAULT is used as fallback if print fails. | |
5650 | # TEST is the test message to use. It can be omitted, in which case | |
5651 | # a test message is built from EXP. | |
5652 | ||
5653 | proc get_integer_valueof { exp default {test ""} } { | |
417e16e2 PM |
5654 | global gdb_prompt |
5655 | ||
0efcde63 AK |
5656 | if {$test == ""} { |
5657 | set test "get integer valueof \"${exp}\"" | |
5658 | } | |
5659 | ||
417e16e2 PM |
5660 | set val ${default} |
5661 | gdb_test_multiple "print /d ${exp}" "$test" { | |
7065b901 TT |
5662 | -re "\\$\[0-9\]* = (\[-\]*\[0-9\]*).*$gdb_prompt $" { |
5663 | set val $expect_out(1,string) | |
2f20e312 | 5664 | pass "$test" |
7065b901 TT |
5665 | } |
5666 | timeout { | |
417e16e2 | 5667 | fail "$test (timeout)" |
7065b901 TT |
5668 | } |
5669 | } | |
5670 | return ${val} | |
5671 | } | |
5672 | ||
20aa2c60 PA |
5673 | # Retrieve the value of EXP in the inferior, as an hexadecimal value |
5674 | # (using "print /x"). DEFAULT is used as fallback if print fails. | |
0efcde63 | 5675 | # TEST is the test message to use. It can be omitted, in which case |
20aa2c60 PA |
5676 | # a test message is built from EXP. |
5677 | ||
5678 | proc get_hexadecimal_valueof { exp default {test ""} } { | |
faafb047 | 5679 | global gdb_prompt |
20aa2c60 PA |
5680 | |
5681 | if {$test == ""} { | |
5682 | set test "get hexadecimal valueof \"${exp}\"" | |
5683 | } | |
5684 | ||
5685 | set val ${default} | |
5686 | gdb_test_multiple "print /x ${exp}" $test { | |
faafb047 PM |
5687 | -re "\\$\[0-9\]* = (0x\[0-9a-zA-Z\]+).*$gdb_prompt $" { |
5688 | set val $expect_out(1,string) | |
5689 | pass "$test" | |
5690 | } | |
faafb047 PM |
5691 | } |
5692 | return ${val} | |
5693 | } | |
417e16e2 | 5694 | |
0efcde63 AK |
5695 | # Retrieve the size of TYPE in the inferior, as a decimal value. DEFAULT |
5696 | # is used as fallback if print fails. TEST is the test message to use. | |
5697 | # It can be omitted, in which case a test message is 'sizeof (TYPE)'. | |
5698 | ||
5699 | proc get_sizeof { type default {test ""} } { | |
5700 | return [get_integer_valueof "sizeof (${type})" $default $test] | |
7065b901 TT |
5701 | } |
5702 | ||
ed3ef339 DE |
5703 | proc get_target_charset { } { |
5704 | global gdb_prompt | |
5705 | ||
5706 | gdb_test_multiple "show target-charset" "" { | |
5707 | -re "The target character set is \"auto; currently (\[^\"\]*)\".*$gdb_prompt $" { | |
5708 | return $expect_out(1,string) | |
5709 | } | |
5710 | -re "The target character set is \"(\[^\"\]*)\".*$gdb_prompt $" { | |
5711 | return $expect_out(1,string) | |
5712 | } | |
5713 | } | |
5714 | ||
5715 | # Pick a reasonable default. | |
5716 | warning "Unable to read target-charset." | |
5717 | return "UTF-8" | |
5718 | } | |
5719 | ||
5ad9dba7 YQ |
5720 | # Get the address of VAR. |
5721 | ||
5722 | proc get_var_address { var } { | |
5723 | global gdb_prompt hex | |
5724 | ||
5725 | # Match output like: | |
5726 | # $1 = (int *) 0x0 | |
5727 | # $5 = (int (*)()) 0 | |
5728 | # $6 = (int (*)()) 0x24 <function_bar> | |
5729 | ||
5730 | gdb_test_multiple "print &${var}" "get address of ${var}" { | |
5731 | -re "\\\$\[0-9\]+ = \\(.*\\) (0|$hex)( <${var}>)?\[\r\n\]+${gdb_prompt} $" | |
5732 | { | |
5733 | pass "get address of ${var}" | |
5734 | if { $expect_out(1,string) == "0" } { | |
5735 | return "0x0" | |
5736 | } else { | |
5737 | return $expect_out(1,string) | |
5738 | } | |
5739 | } | |
5740 | } | |
5741 | return "" | |
5742 | } | |
5743 | ||
45f25d6c AB |
5744 | # Return the frame number for the currently selected frame |
5745 | proc get_current_frame_number {{test_name ""}} { | |
5746 | global gdb_prompt | |
5747 | ||
5748 | if { $test_name == "" } { | |
5749 | set test_name "get current frame number" | |
5750 | } | |
5751 | set frame_num -1 | |
5752 | gdb_test_multiple "frame" $test_name { | |
5753 | -re "#(\[0-9\]+) .*$gdb_prompt $" { | |
5754 | set frame_num $expect_out(1,string) | |
5755 | } | |
5756 | } | |
5757 | return $frame_num | |
5758 | } | |
5759 | ||
db863c42 MF |
5760 | # Get the current value for remotetimeout and return it. |
5761 | proc get_remotetimeout { } { | |
5762 | global gdb_prompt | |
5763 | global decimal | |
5764 | ||
5765 | gdb_test_multiple "show remotetimeout" "" { | |
5766 | -re "Timeout limit to wait for target to respond is ($decimal).*$gdb_prompt $" { | |
ae59b1da | 5767 | return $expect_out(1,string) |
db863c42 MF |
5768 | } |
5769 | } | |
5770 | ||
5771 | # Pick the default that gdb uses | |
5772 | warning "Unable to read remotetimeout" | |
5773 | return 300 | |
5774 | } | |
5775 | ||
5776 | # Set the remotetimeout to the specified timeout. Nothing is returned. | |
5777 | proc set_remotetimeout { timeout } { | |
5778 | global gdb_prompt | |
5779 | ||
5780 | gdb_test_multiple "set remotetimeout $timeout" "" { | |
5781 | -re "$gdb_prompt $" { | |
5782 | verbose "Set remotetimeout to $timeout\n" | |
5783 | } | |
5784 | } | |
5785 | } | |
5786 | ||
805acca0 AA |
5787 | # Get the target's current endianness and return it. |
5788 | proc get_endianness { } { | |
5789 | global gdb_prompt | |
5790 | ||
5791 | gdb_test_multiple "show endian" "determine endianness" { | |
5792 | -re ".* (little|big) endian.*\r\n$gdb_prompt $" { | |
5793 | # Pass silently. | |
5794 | return $expect_out(1,string) | |
5795 | } | |
5796 | } | |
5797 | return "little" | |
5798 | } | |
5799 | ||
1e537771 TT |
5800 | # ROOT and FULL are file names. Returns the relative path from ROOT |
5801 | # to FULL. Note that FULL must be in a subdirectory of ROOT. | |
5802 | # For example, given ROOT = /usr/bin and FULL = /usr/bin/ls, this | |
5803 | # will return "ls". | |
5804 | ||
5805 | proc relative_filename {root full} { | |
5806 | set root_split [file split $root] | |
5807 | set full_split [file split $full] | |
5808 | ||
5809 | set len [llength $root_split] | |
5810 | ||
5811 | if {[eval file join $root_split] | |
5812 | != [eval file join [lrange $full_split 0 [expr {$len - 1}]]]} { | |
5813 | error "$full not a subdir of $root" | |
5814 | } | |
5815 | ||
5816 | return [eval file join [lrange $full_split $len end]] | |
5817 | } | |
5818 | ||
812f7342 TT |
5819 | # Log gdb command line and script if requested. |
5820 | if {[info exists TRANSCRIPT]} { | |
5821 | rename send_gdb real_send_gdb | |
5822 | rename remote_spawn real_remote_spawn | |
5823 | rename remote_close real_remote_close | |
5824 | ||
5825 | global gdb_transcript | |
5826 | set gdb_transcript "" | |
5827 | ||
5828 | global gdb_trans_count | |
5829 | set gdb_trans_count 1 | |
5830 | ||
5831 | proc remote_spawn {args} { | |
5832 | global gdb_transcript gdb_trans_count outdir | |
5833 | ||
5834 | if {$gdb_transcript != ""} { | |
5835 | close $gdb_transcript | |
5836 | } | |
5837 | set gdb_transcript [open [file join $outdir transcript.$gdb_trans_count] w] | |
5838 | puts $gdb_transcript [lindex $args 1] | |
5839 | incr gdb_trans_count | |
5840 | ||
5841 | return [uplevel real_remote_spawn $args] | |
5842 | } | |
5843 | ||
5844 | proc remote_close {args} { | |
5845 | global gdb_transcript | |
5846 | ||
5847 | if {$gdb_transcript != ""} { | |
5848 | close $gdb_transcript | |
5849 | set gdb_transcript "" | |
5850 | } | |
5851 | ||
5852 | return [uplevel real_remote_close $args] | |
5853 | } | |
5854 | ||
5855 | proc send_gdb {args} { | |
5856 | global gdb_transcript | |
5857 | ||
5858 | if {$gdb_transcript != ""} { | |
5859 | puts -nonewline $gdb_transcript [lindex $args 0] | |
5860 | } | |
5861 | ||
5862 | return [uplevel real_send_gdb $args] | |
5863 | } | |
5864 | } | |
37aeb5df | 5865 | |
5e92f71a TT |
5866 | # If GDB_PARALLEL exists, then set up the parallel-mode directories. |
5867 | if {[info exists GDB_PARALLEL]} { | |
5868 | if {[is_remote host]} { | |
5869 | unset GDB_PARALLEL | |
5870 | } else { | |
3d338901 DE |
5871 | file mkdir \ |
5872 | [make_gdb_parallel_path outputs] \ | |
5873 | [make_gdb_parallel_path temp] \ | |
5874 | [make_gdb_parallel_path cache] | |
5e92f71a TT |
5875 | } |
5876 | } | |
5877 | ||
bbfba9ed | 5878 | proc core_find {binfile {deletefiles {}} {arg ""}} { |
37aeb5df JK |
5879 | global objdir subdir |
5880 | ||
5881 | set destcore "$binfile.core" | |
5882 | file delete $destcore | |
5883 | ||
5884 | # Create a core file named "$destcore" rather than just "core", to | |
5885 | # avoid problems with sys admin types that like to regularly prune all | |
5886 | # files named "core" from the system. | |
5887 | # | |
5888 | # Arbitrarily try setting the core size limit to "unlimited" since | |
5889 | # this does not hurt on systems where the command does not work and | |
5890 | # allows us to generate a core on systems where it does. | |
5891 | # | |
5892 | # Some systems append "core" to the name of the program; others append | |
5893 | # the name of the program to "core"; still others (like Linux, as of | |
5894 | # May 2003) create cores named "core.PID". In the latter case, we | |
5895 | # could have many core files lying around, and it may be difficult to | |
5896 | # tell which one is ours, so let's run the program in a subdirectory. | |
5897 | set found 0 | |
93c0ef37 | 5898 | set coredir [standard_output_file coredir.[getpid]] |
37aeb5df | 5899 | file mkdir $coredir |
bbfba9ed | 5900 | catch "system \"(cd ${coredir}; ulimit -c unlimited; ${binfile} ${arg}; true) >/dev/null 2>&1\"" |
37aeb5df JK |
5901 | # remote_exec host "${binfile}" |
5902 | foreach i "${coredir}/core ${coredir}/core.coremaker.c ${binfile}.core" { | |
5903 | if [remote_file build exists $i] { | |
5904 | remote_exec build "mv $i $destcore" | |
5905 | set found 1 | |
5906 | } | |
5907 | } | |
5908 | # Check for "core.PID". | |
5909 | if { $found == 0 } { | |
5910 | set names [glob -nocomplain -directory $coredir core.*] | |
5911 | if {[llength $names] == 1} { | |
5912 | set corefile [file join $coredir [lindex $names 0]] | |
5913 | remote_exec build "mv $corefile $destcore" | |
5914 | set found 1 | |
5915 | } | |
5916 | } | |
5917 | if { $found == 0 } { | |
5918 | # The braindamaged HPUX shell quits after the ulimit -c above | |
5919 | # without executing ${binfile}. So we try again without the | |
5920 | # ulimit here if we didn't find a core file above. | |
5921 | # Oh, I should mention that any "braindamaged" non-Unix system has | |
5922 | # the same problem. I like the cd bit too, it's really neat'n stuff. | |
5923 | catch "system \"(cd ${objdir}/${subdir}; ${binfile}; true) >/dev/null 2>&1\"" | |
5924 | foreach i "${objdir}/${subdir}/core ${objdir}/${subdir}/core.coremaker.c ${binfile}.core" { | |
5925 | if [remote_file build exists $i] { | |
5926 | remote_exec build "mv $i $destcore" | |
5927 | set found 1 | |
5928 | } | |
5929 | } | |
5930 | } | |
5931 | ||
5932 | # Try to clean up after ourselves. | |
5933 | foreach deletefile $deletefiles { | |
5934 | remote_file build delete [file join $coredir $deletefile] | |
5935 | } | |
5936 | remote_exec build "rmdir $coredir" | |
5937 | ||
5938 | if { $found == 0 } { | |
5939 | warning "can't generate a core file - core tests suppressed - check ulimit -c" | |
5940 | return "" | |
5941 | } | |
5942 | return $destcore | |
5943 | } | |
ee5683ab | 5944 | |
2223449a KB |
5945 | # gdb_target_symbol_prefix compiles a test program and then examines |
5946 | # the output from objdump to determine the prefix (such as underscore) | |
5947 | # for linker symbol prefixes. | |
5948 | ||
5949 | gdb_caching_proc gdb_target_symbol_prefix { | |
bf326452 AH |
5950 | # Compile a simple test program... |
5951 | set src { int main() { return 0; } } | |
5952 | if {![gdb_simple_compile target_symbol_prefix $src executable]} { | |
5953 | return 0 | |
2223449a KB |
5954 | } |
5955 | ||
2223449a KB |
5956 | set prefix "" |
5957 | ||
bf326452 AH |
5958 | set objdump_program [gdb_find_objdump] |
5959 | set result [catch "exec $objdump_program --syms $obj" output] | |
2223449a | 5960 | |
bf326452 AH |
5961 | if { $result == 0 \ |
5962 | && ![regexp -lineanchor \ | |
5963 | { ([^ a-zA-Z0-9]*)main$} $output dummy prefix] } { | |
5964 | verbose "gdb_target_symbol_prefix: Could not find main in objdump output; returning null prefix" 2 | |
2223449a KB |
5965 | } |
5966 | ||
bf326452 | 5967 | file delete $obj |
2223449a KB |
5968 | |
5969 | return $prefix | |
5970 | } | |
5971 | ||
5bd18990 AB |
5972 | # Return 1 if target supports scheduler locking, otherwise return 0. |
5973 | ||
5974 | gdb_caching_proc target_supports_scheduler_locking { | |
5975 | global gdb_prompt | |
5976 | ||
5977 | set me "gdb_target_supports_scheduler_locking" | |
5978 | ||
bf326452 AH |
5979 | set src { int main() { return 0; } } |
5980 | if {![gdb_simple_compile $me $src executable]} { | |
5bd18990 AB |
5981 | return 0 |
5982 | } | |
5983 | ||
bf326452 | 5984 | clean_restart $obj |
58bbcd02 TV |
5985 | if ![runto_main] { |
5986 | return 0 | |
5987 | } | |
5bd18990 AB |
5988 | |
5989 | set supports_schedule_locking -1 | |
5990 | set current_schedule_locking_mode "" | |
5991 | ||
5992 | set test "reading current scheduler-locking mode" | |
5993 | gdb_test_multiple "show scheduler-locking" $test { | |
5994 | -re "Mode for locking scheduler during execution is \"(\[\^\"\]*)\".*$gdb_prompt" { | |
5995 | set current_schedule_locking_mode $expect_out(1,string) | |
5996 | } | |
5997 | -re "$gdb_prompt $" { | |
5998 | set supports_schedule_locking 0 | |
5999 | } | |
6000 | timeout { | |
6001 | set supports_schedule_locking 0 | |
6002 | } | |
6003 | } | |
6004 | ||
6005 | if { $supports_schedule_locking == -1 } { | |
6006 | set test "checking for scheduler-locking support" | |
6007 | gdb_test_multiple "set scheduler-locking $current_schedule_locking_mode" $test { | |
6008 | -re "Target '\[^'\]+' cannot support this command\..*$gdb_prompt $" { | |
6009 | set supports_schedule_locking 0 | |
6010 | } | |
6011 | -re "$gdb_prompt $" { | |
6012 | set supports_schedule_locking 1 | |
6013 | } | |
6014 | timeout { | |
6015 | set supports_schedule_locking 0 | |
6016 | } | |
6017 | } | |
6018 | } | |
6019 | ||
6020 | if { $supports_schedule_locking == -1 } { | |
6021 | set supports_schedule_locking 0 | |
6022 | } | |
6023 | ||
6024 | gdb_exit | |
bf326452 | 6025 | remote_file build delete $obj |
5bd18990 AB |
6026 | verbose "$me: returning $supports_schedule_locking" 2 |
6027 | return $supports_schedule_locking | |
6028 | } | |
6029 | ||
2223449a KB |
6030 | # gdb_target_symbol returns the provided symbol with the correct prefix |
6031 | # prepended. (See gdb_target_symbol_prefix, above.) | |
6032 | ||
6033 | proc gdb_target_symbol { symbol } { | |
6034 | set prefix [gdb_target_symbol_prefix] | |
6035 | return "${prefix}${symbol}" | |
6036 | } | |
6037 | ||
f01dcfd9 KB |
6038 | # gdb_target_symbol_prefix_flags_asm returns a string that can be |
6039 | # added to gdb_compile options to define the C-preprocessor macro | |
6040 | # SYMBOL_PREFIX with a value that can be prepended to symbols | |
6041 | # for targets which require a prefix, such as underscore. | |
6042 | # | |
6043 | # This version (_asm) defines the prefix without double quotes | |
6044 | # surrounding the prefix. It is used to define the macro | |
6045 | # SYMBOL_PREFIX for assembly language files. Another version, below, | |
6046 | # is used for symbols in inline assembler in C/C++ files. | |
6047 | # | |
6048 | # The lack of quotes in this version (_asm) makes it possible to | |
6049 | # define supporting macros in the .S file. (The version which | |
6050 | # uses quotes for the prefix won't work for such files since it's | |
6051 | # impossible to define a quote-stripping macro in C.) | |
6052 | # | |
6053 | # It's possible to use this version (_asm) for C/C++ source files too, | |
6054 | # but a string is usually required in such files; providing a version | |
6055 | # (no _asm) which encloses the prefix with double quotes makes it | |
6056 | # somewhat easier to define the supporting macros in the test case. | |
6057 | ||
6058 | proc gdb_target_symbol_prefix_flags_asm {} { | |
6059 | set prefix [gdb_target_symbol_prefix] | |
6060 | if {$prefix ne ""} { | |
6061 | return "additional_flags=-DSYMBOL_PREFIX=$prefix" | |
6062 | } else { | |
6063 | return ""; | |
6064 | } | |
6065 | } | |
6066 | ||
6067 | # gdb_target_symbol_prefix_flags returns the same string as | |
6068 | # gdb_target_symbol_prefix_flags_asm, above, but with the prefix | |
6069 | # enclosed in double quotes if there is a prefix. | |
6070 | # | |
6071 | # See the comment for gdb_target_symbol_prefix_flags_asm for an | |
6072 | # extended discussion. | |
ee5683ab PM |
6073 | |
6074 | proc gdb_target_symbol_prefix_flags {} { | |
f01dcfd9 KB |
6075 | set prefix [gdb_target_symbol_prefix] |
6076 | if {$prefix ne ""} { | |
6077 | return "additional_flags=-DSYMBOL_PREFIX=\"$prefix\"" | |
ee5683ab | 6078 | } else { |
f01dcfd9 | 6079 | return ""; |
ee5683ab PM |
6080 | } |
6081 | } | |
6082 | ||
6e45f158 DE |
6083 | # A wrapper for 'remote_exec host' that passes or fails a test. |
6084 | # Returns 0 if all went well, nonzero on failure. | |
6085 | # TEST is the name of the test, other arguments are as for remote_exec. | |
6086 | ||
6087 | proc run_on_host { test program args } { | |
6088 | verbose -log "run_on_host: $program $args" | |
6089 | # remote_exec doesn't work properly if the output is set but the | |
6090 | # input is the empty string -- so replace an empty input with | |
6091 | # /dev/null. | |
6092 | if {[llength $args] > 1 && [lindex $args 1] == ""} { | |
6093 | set args [lreplace $args 1 1 "/dev/null"] | |
6094 | } | |
6095 | set result [eval remote_exec host [list $program] $args] | |
6096 | verbose "result is $result" | |
6097 | set status [lindex $result 0] | |
6098 | set output [lindex $result 1] | |
6099 | if {$status == 0} { | |
6100 | pass $test | |
6101 | return 0 | |
6102 | } else { | |
50cc37c8 | 6103 | verbose -log "run_on_host failed: $output" |
6e45f158 DE |
6104 | fail $test |
6105 | return -1 | |
6106 | } | |
6107 | } | |
6108 | ||
a587b477 DE |
6109 | # Return non-zero if "board_info debug_flags" mentions Fission. |
6110 | # http://gcc.gnu.org/wiki/DebugFission | |
6111 | # Fission doesn't support everything yet. | |
6112 | # This supports working around bug 15954. | |
6113 | ||
6114 | proc using_fission { } { | |
6115 | set debug_flags [board_info [target_info name] debug_flags] | |
6116 | return [regexp -- "-gsplit-dwarf" $debug_flags] | |
6117 | } | |
6118 | ||
4b48d439 KS |
6119 | # Search the caller's ARGS list and set variables according to the list of |
6120 | # valid options described by ARGSET. | |
6121 | # | |
6122 | # The first member of each one- or two-element list in ARGSET defines the | |
6123 | # name of a variable that will be added to the caller's scope. | |
6124 | # | |
6125 | # If only one element is given to describe an option, it the value is | |
6126 | # 0 if the option is not present in (the caller's) ARGS or 1 if | |
6127 | # it is. | |
6128 | # | |
6129 | # If two elements are given, the second element is the default value of | |
6130 | # the variable. This is then overwritten if the option exists in ARGS. | |
6131 | # | |
6132 | # Any parse_args elements in (the caller's) ARGS will be removed, leaving | |
6133 | # any optional components. | |
6134 | ||
6135 | # Example: | |
6136 | # proc myproc {foo args} { | |
6137 | # parse_args {{bar} {baz "abc"} {qux}} | |
6138 | # # ... | |
6139 | # } | |
6140 | # myproc ABC -bar -baz DEF peanut butter | |
6141 | # will define the following variables in myproc: | |
6142 | # foo (=ABC), bar (=1), baz (=DEF), and qux (=0) | |
6143 | # args will be the list {peanut butter} | |
6144 | ||
6145 | proc parse_args { argset } { | |
6146 | upvar args args | |
6147 | ||
6148 | foreach argument $argset { | |
6149 | if {[llength $argument] == 1} { | |
6150 | # No default specified, so we assume that we should set | |
6151 | # the value to 1 if the arg is present and 0 if it's not. | |
6152 | # It is assumed that no value is given with the argument. | |
6153 | set result [lsearch -exact $args "-$argument"] | |
6154 | if {$result != -1} then { | |
6155 | uplevel 1 [list set $argument 1] | |
6156 | set args [lreplace $args $result $result] | |
6157 | } else { | |
6158 | uplevel 1 [list set $argument 0] | |
6159 | } | |
6160 | } elseif {[llength $argument] == 2} { | |
6161 | # There are two items in the argument. The second is a | |
6162 | # default value to use if the item is not present. | |
6163 | # Otherwise, the variable is set to whatever is provided | |
6164 | # after the item in the args. | |
6165 | set arg [lindex $argument 0] | |
6166 | set result [lsearch -exact $args "-[lindex $arg 0]"] | |
6167 | if {$result != -1} then { | |
6168 | uplevel 1 [list set $arg [lindex $args [expr $result+1]]] | |
6169 | set args [lreplace $args $result [expr $result+1]] | |
6170 | } else { | |
6171 | uplevel 1 [list set $arg [lindex $argument 1]] | |
6172 | } | |
6173 | } else { | |
6174 | error "Badly formatted argument \"$argument\" in argument set" | |
6175 | } | |
6176 | } | |
6177 | ||
6178 | # The remaining args should be checked to see that they match the | |
6179 | # number of items expected to be passed into the procedure... | |
6180 | } | |
6181 | ||
87f0e720 KS |
6182 | # Capture the output of COMMAND in a string ignoring PREFIX (a regexp); |
6183 | # return that string. | |
6184 | ||
e9089e05 MM |
6185 | proc capture_command_output { command prefix } { |
6186 | global gdb_prompt | |
6187 | global expect_out | |
6188 | ||
6189 | set output_string "" | |
6190 | gdb_test_multiple "$command" "capture_command_output for $command" { | |
87f0e720 | 6191 | -re "[string_to_regexp ${command}]\[\r\n\]+${prefix}(.*)\[\r\n\]+$gdb_prompt $" { |
e9089e05 MM |
6192 | set output_string $expect_out(1,string) |
6193 | } | |
6194 | } | |
6195 | return $output_string | |
6196 | } | |
6197 | ||
3c724c8c PMR |
6198 | # A convenience function that joins all the arguments together, with a |
6199 | # regexp that matches exactly one end of line in between each argument. | |
6200 | # This function is ideal to write the expected output of a GDB command | |
6201 | # that generates more than a couple of lines, as this allows us to write | |
6202 | # each line as a separate string, which is easier to read by a human | |
6203 | # being. | |
6204 | ||
6205 | proc multi_line { args } { | |
6206 | return [join $args "\r\n"] | |
6207 | } | |
6208 | ||
fad0c9fb PA |
6209 | # Similar to the above, but while multi_line is meant to be used to |
6210 | # match GDB output, this one is meant to be used to build strings to | |
6211 | # send as GDB input. | |
6212 | ||
6213 | proc multi_line_input { args } { | |
6214 | return [join $args "\n"] | |
6215 | } | |
6216 | ||
896c0c1e SM |
6217 | # Return the version of the DejaGnu framework. |
6218 | # | |
6219 | # The return value is a list containing the major, minor and patch version | |
6220 | # numbers. If the version does not contain a minor or patch number, they will | |
6221 | # be set to 0. For example: | |
6222 | # | |
6223 | # 1.6 -> {1 6 0} | |
6224 | # 1.6.1 -> {1 6 1} | |
6225 | # 2 -> {2 0 0} | |
6226 | ||
6227 | proc dejagnu_version { } { | |
6228 | # The frame_version variable is defined by DejaGnu, in runtest.exp. | |
6229 | global frame_version | |
6230 | ||
6231 | verbose -log "DejaGnu version: $frame_version" | |
6232 | verbose -log "Expect version: [exp_version]" | |
6233 | verbose -log "Tcl version: [info tclversion]" | |
6234 | ||
6235 | set dg_ver [split $frame_version .] | |
6236 | ||
6237 | while { [llength $dg_ver] < 3 } { | |
6238 | lappend dg_ver 0 | |
6239 | } | |
6240 | ||
6241 | return $dg_ver | |
6242 | } | |
fad0c9fb | 6243 | |
3a3fd0fd PA |
6244 | # Define user-defined command COMMAND using the COMMAND_LIST as the |
6245 | # command's definition. The terminating "end" is added automatically. | |
6246 | ||
6247 | proc gdb_define_cmd {command command_list} { | |
6248 | global gdb_prompt | |
6249 | ||
6250 | set input [multi_line_input {*}$command_list "end"] | |
6251 | set test "define $command" | |
6252 | ||
6253 | gdb_test_multiple "define $command" $test { | |
6254 | -re "End with" { | |
6255 | gdb_test_multiple $input $test { | |
6256 | -re "\r\n$gdb_prompt " { | |
6257 | } | |
6258 | } | |
6259 | } | |
6260 | } | |
6261 | } | |
6262 | ||
42159ca5 TT |
6263 | # Always load compatibility stuff. |
6264 | load_lib future.exp |